Reference Source

24,640 records

Has this ISO standard been withdrawn, and what replaced it?

24,640 records, one fact each. Every value is transcribed from the source that states it and carries the sentence it was taken from: 1 source across 1 site, last checked 2026-09-16, due for re-check by 2027-03-15. Every record has a page of its own, quoting the line that states it.

Records24,640
Sources1
Verified
Review by
LicenceISO Open Data, published under the Open Data Commons Attribution License v1.0 (ODC-By 1.0), which explicitly permits reuse with attribution. Each record quotes the CSV row it was read from and links the file.

About this data

Every deliverable in ISO's own open-data register that has been withdrawn or superseded, with the replacement the register points to. Answers 'ISO 9001:2008 withdrawn — replaced by what', 'is ISO 13485:2003 still current', and 'what replaced IEC 31010:2009' — the lookup assistants get confidently wrong on an obscure designation, because the supersession chain is versioned, scattered across editions, and only ever published as a machine-readable file. 24,620 records read from the ISO Open Data CSV, each quoting the CSV row it came from, and each on a page of its own. Two things the register does not give, so neither do these pages: the date a standard was withdrawn (the only date in the file is the deliverable's own publication date), and any guarantee that the named replacement has itself been published. Measured 2026-09-14: 2,507 records (10.2%) name at least one replacement the register has never given a publication date, and on 416 of those (1.7%) every replacement named is unpublished — a revision project that is registered but that you cannot obtain. The test is the register's own publicationDate column, not the designation's spelling: all 29,680 rows it marks withdrawn and all 8,559 it marks current carry a publication date, and these replacement rows carry none.

The data

IdentifierItem titleReplacement named by the registerPublication dateUnpublished replacement
IEC 559:1982Binary floating point arithmetic for microprocessor systemsIEC 559:19891982-06-01
IEC 559:1989Binary floating-point arithmetic for microprocessor systemsISO/IEC/IEEE 60559:20111989-02-01
IEC 796-1:1990Microprocessor system bus — 8-bit and 16-bit data (MULTIBUS I) — Part 1: Functional description with electrical and timing specificationsIEC/FDIS 796-1 | IEC 60796-1:19901990-09-01IEC/FDIS 796-1
IEC 796-2:1990Microprocessor system bus — 8-bit and 16-bit data (MULTIBUS I) — Part 2: Mechanical and pin descriptions for the system bus configuration, with edge connectors (direct)IEC 60796-2:1990 | IEC/FDIS 796-21990-09-01IEC/FDIS 796-2
IEC 796-3:1990Microprocessor system BUS I, 8-bit and 16-bit data (MULTIBUS I) — Part 3: Mechanical and pin descriptions for the Eurocard configuration with pin and socket (indirect) connectorsIEC/FDIS 796-3 | IEC 60796-3:19901990-09-01IEC/FDIS 796-3
IEC 821:1987Bus — Microprocessor system bus for 1 to 4 byte dataIEC 821:19911987-06-01
IEC 821:1991IEC 821 VMEbus — Microprocessor system bus for 1 byte to 4 byte dataIEC 60821:19911991-12-26
IEC 822:1988Parallel Sub-system Bus of the IEC 821 VME busIEC 60822:1988 | IEC/FCD 8221988-06-01IEC/FCD 822
IEC 823:1990Microprocessor system bus (VMSbus) — Serial sub-system bus of the IEC 821 Bus (VMEbus)IEC/FCD 823 | IEC 60823:19901990-09-01IEC/FCD 823
IEC 824:1988Terminology related to microprocessorsIEC 60824:19881988-03-01
IEC 847:1988Characteristics of local area networks (LAN)IEC/FDIS 8471988-06-01IEC/FDIS 847
IEC 948:1988Numeric keyboard for home electronic systems (HES)IEC 60948:1988 | IEC/FCD 9481988-06-01IEC/FCD 948
IEC 31010:2009Risk management — Risk assessment techniquesIEC 31010:20192009-12-01
IEC 60086-3:2011Primary batteries — Part 3: Watch batteriesIEC 60086-3:20162011-01-31
IEC 60086-3:2016Primary batteries — Part 3: Watch batteriesIEC 60086-3:20212016-08-26
IEC 60601-1-8:2003Medical electrical equipment — Part 1-8: General requirements for safety — Collateral standard: General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systemsIEC 60601-1-8:20062003-12-01
IEC 60601-1-8:2003/Amd 1:2006Medical electrical equipment — Part 1-8: General requirements for safety — Collateral standard: General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems — Amendment 1IEC 60601-1-8:20062006-03-20
IEC 60601-1-11:2010Medical electrical equipment — Part 1-11: General requirements for basic safety and essential performance — Collateral standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environmentIEC 60601-1-11:20152010-05-04
IEC 60601-1-11:2010/Cor 1:2011Medical electrical equipment — Part 1-11: General requirements for basic safety and essential performance — Collateral standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment — Technical Corrigendum 1IEC 60601-1-11:20152011-05-06
IEC 60601-2-12:2001Medical electrical equipment — Part 2-12: Particular requirements for the safety of lung ventilators — Critical care ventilatorsISO 80601-2-12:20112001-12-06
IEC 60601-2-13:1998Medical electrical equipment — Part 2-13: Particular requirements for the safety of anaesthetic workstationsIEC 60601-2-13:20031998-05-01
IEC 60601-2-13:2003Medical electrical equipment — Part 2-13: Particular requirements for the safety and essential performance of anaesthetic systemsISO 80601-2-13:20112003-12-01
IEC 60601-2-13:2003/Amd 1:2006Medical electrical equipment — Part 2-13: Particular requirements for the safety and essential performance of anaesthetic systems — Amendment 1ISO 80601-2-13:20112006-06-02
IEC 60601-2-52:2009Medical electrical equipment — Part 2-52: Particular requirements for the basic safety and essential performance of medical bedsIEC 80601-2-52:20262009-12-14
IEC 60601-2-52:2009/Amd 1:2015Medical electrical equipment — Part 2-52: Particular requirements for the basic safety and essential performance of medical beds — Amendment 1IEC 80601-2-52:20262015-03-24
IEC 60601-2-52:2009/Cor 1:2010Medical electrical equipment — Part 2-52: Particular requirements for the basic safety and essential performance of medical beds — Technical Corrigendum 1IEC 80601-2-52:20262010-09-23
IEC 61340-4-4:2005Electrostatics — Part 4-4: Standard test methods for specific applications - Electrostatic classification of flexible intermediate bulk containers (FIBC)IEC/NP 61340-4-42005-10-28IEC/NP 61340-4-4
IEC 61400-4:2012Wind turbines — Part 4: Design requirements for wind turbine gearboxesIEC 61400-4:20252012-12-05
IEC 62264-1:2003Enterprise-control system integration — Part 1: Models and terminologyIEC 62264-1:20132003-06-06
IEC 62264-2:2004Enterprise-control system integration — Part 2: Model object attributesIEC 62264-2:20152004-08-09
IEC 62264-2:2015Enterprise-control system integration — Part 2: Objects and attributes for enterprise-control system integrationIEC 62264-2:20262015-03-25
IEC 62264-3:2007Enterprise-control system integration — Part 3: Activity models of manufacturing operations managementIEC 62264-3:20162007-06-19
IEC 62366:2007Medical devices — Application of usability engineering to medical devicesIEC 62366-1:20152007-11-13
IEC 62366:2007/Amd 1:2014Medical devices — Application of usability engineering to medical devices — Amendment 1IEC 62366-1:20152014-01-29
IEC 80000-6:2008Quantities and units — Part 6: ElectromagnetismIEC 80000-6:20222008-04-01
IEC 80000-13:2008Quantities and units — Part 13: Information science and technologyIEC 80000-13:20252008-04-01
IEC 80000-14:2008Quantities and units — Part 14: Telebiometrics related to human physiologyIEC/NP 80003-12008-04-11IEC/NP 80003-1
IEC 80001-1:2010Application of risk management for IT-networks incorporating medical devices — Part 1: Roles, responsibilities and activitiesIEC 80001-1:20212010-10-28
IEC 80416-1:2001Basic principles for graphical symbols for use on equipment — Part 1: Creation of symbol originalsIEC 80416-1:20082001-08-23
IEC 80601-2-30:2009Medical electrical equipment — Part 2-30: Particular requirements for basic safety and essential performance of automated non-invasive sphygmomanometersIEC 80601-2-30:20182009-02-02
IEC 80601-2-30:2009/Amd 1:2013Medical electrical equipment — Part 2-30: Particular requirements for basic safety and essential performance of automated non-invasive sphygmomanometers — Amendment 1IEC 80601-2-30:20182013-08-02
IEC 80601-2-58:2008Medical electrical equipment — Part 2-58: Particular requirements for basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgeryIEC 80601-2-58:20142008-12-02
IEC 80601-2-58:2014Medical electrical equipment — Part 2-58: Particular requirements for basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgeryIEC 80601-2-58:20242014-09-09
IEC 80601-2-58:2014/Amd 1:2016Medical electrical equipment — Part 2-58: Particular requirements for basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery — Amendment 1: Proposed Horizontal StandardIEC 80601-2-58:20242016-10-20
IEC 80601-2-59:2008Medical electrical equipment — Part 2-59: Particular requirements for basic safety and essential performance of screening thermographs for human febrile temperature screeningIEC 80601-2-59:20172008-12-02
IEC 80601-2-60:2012Medical electrical equipment — Part 2-60: Particular requirements for basic safety and essential performance of dental equipmentIEC 80601-2-60:20192012-02-24
IEC 80601-2-71:2015Medical electrical equipment — Part 2-71: Particular requirements for the basic safety and essential performance of functional Near-Infrared Spectroscopy (NIRS) equipmentIEC 80601-2-71:20252015-06-10
IEC 81346-1:2009Industrial systems, installations and equipment and industrial products — Structuring principles and reference designations — Part 1: Basic rulesIEC 81346-1:20222009-08-13
IEC 81346-2:2009Industrial systems, installations and equipment and industrial products — Structuring principles and reference designations — Part 2: Classification of objects and codes for classesIEC 81346-2:20192009-08-13
IEC 81714-2:1998Design of graphical symbols for use in the technical documentation of products — Part 2: Specification for graphical symbols in a computer sensible form, including graphical symbols for a reference library, and requirements for their interchangeIEC 81714-2:20061998-11-01
IEC 81714-3:1998Design of graphical symbols for use in the technical documentation of products — Part 3: Classification of connect nodes, networks and their encodingIEC 81714-3:20041998-10-01
IEC 82079-1:2012Preparation of instructions for use — Structuring, content and presentation — Part 1: General principles and detailed requirementsIEC/IEEE 82079-1:20192012-08-13
IEC/PAS 60092-510:2009Electrical installations in ships — Special features — High Voltage Shore Connection Systems (HVSC-Systems) — Part 510:ISO/IEC/IEEE 80005-1:20122009-06-12
IEC/PAS 80005-3:2014Utility connections in port — Part 3: Low Voltage Shore Connection (LVSC) Systems — General requirementsIEC/IEEE 80005-3:20252014-09-19
IEC/TR 828:1988Pin allocations for future microprocessor systems using the IEC 603-2 connectorIEC/FCD 8281988-06-01IEC/FCD 828
IEC/TR 907:1989Local area networks CSMA/CD 10 Mbit/s baseband planning and installation guideIEC/PRF TR 9071989-04-01IEC/PRF TR 907
IEC/TR 80001-2-2:2012Application of risk management for IT-networks incorporating medical devices — Part 2-2: Guidance for the communication of medical device security needs, risks and controlsIEC/TS 81001-2-2:2025 | IEC/NP TR 80001-2-22012-07-13IEC/NP TR 80001-2-2
IEC/TR 80001-2-8:2016Application of risk management for IT-networks incorporating medical devices — Part 2-8: Application guidance — Guidance on standards for establishing the security capabilities identified in IEC 80001-2-2IEC/TS 81001-2-2:2025 | IEC/NP TR 80001-2-82016-05-19IEC/NP TR 80001-2-8
ISO 1:1975Standard reference temperature for industrial length measurementsISO 1:20021975-04-01
ISO 1:2002Geometrical Product Specifications (GPS) — Standard reference temperature for geometrical product specification and verificationISO 1:20162002-07-25
ISO 1:2016Geometrical product specifications (GPS) — Standard reference temperature for the specification of geometrical and dimensional propertiesISO 1:20222016-08-26
ISO 4:1972Documentation — International code for the abbreviation of titles of periodicalsISO 4:19841972-03-01
ISO 4:1984Documentation — Rules for the abbreviation of title words and titles of publicationsISO 4:19971984-12-01
ISO 5-1:1984Photography — Density measurements — Part 1: Terms, symbols and notationsISO 5-1:20091984-03-01
ISO 5-2:1985Photography — Density measurements — Part 2: Geometric conditions for transmission densityISO 5-2:1991 | ISO 5-2:20011985-06-13
ISO 5-2:1991Photography — Density measurements — Part 2: Geometric conditions for transmission densityISO 5-2:20011991-12-18
ISO 5-2:2001Photography — Density measurements — Part 2: Geometric conditions for transmission densityISO 5-2:20092001-06-14
ISO 5-3:1984Photography — Density measurements — Part 3: Spectral conditionsISO 5-3:19951984-08-16
ISO 5-3:1995Photography — Density measurements — Part 3: Spectral conditionsISO 5-3:20091995-11-09
ISO 5-4:1983Photography — Density measurements — Part 4: Geometric conditions for reflection densityISO 5-4:19951983-11-01
ISO 5-4:1995Photography — Density measurements — Part 4: Geometric conditions for reflection densityISO 5-4:20091995-05-11
ISO 5:1974Photography — Determination of diffuse transmission densityISO 5-1:19841974-10-01
ISO 6:1974Photography — Determination of ISO speed of monochrome (black-and-white), continuous-tone photographic negative materials for still photographyISO 6:19931974-02-01
ISO 7-1:1982Pipe threads where pressure-tight joints are made on the threads — Part 1: Designation, dimensions and tolerancesISO 7-1:19941982-12-01
ISO 7-2:1982Pipe threads where pressure-tight joints are made on the threads — Part 2: Verification by means of limit gaugesISO 7-2:20001982-02-01
ISO 8:1977Documentation — Presentation of periodicalsISO 8:2019 | ISO/CD 81977-09-01ISO/CD 8
ISO 9:1986Documentation — Transliteration of Slavic Cyrillic characters into Latin charactersISO 9:19951986-09-04
ISO 11:1980Aircraft — Pressure cabin ground test connectionsISO 11:19871980-03-01
ISO 12:1976Aerospace — Pipelines — Identification schemeISO 12:19871976-11-01
ISO 15:1981Rolling bearings — Radial bearings — Boundary dimensions — General planISO 15:19981981-12-01
ISO 15:1981/Add 1:1985Rolling bearings — Radial bearings — Boundary dimensions — General plan — Addendum 1: Diameter series 7 (d greater than or equal to 12 mm and less than or equal to 30 mm)ISO 15:19981985-06-20
ISO 15:1998Rolling bearings — Radial bearings — Boundary dimensions, general planISO 15:20111998-04-28
ISO 15:2011Rolling bearings — Radial bearings — Boundary dimensions, general planISO 15:20172011-03-01
ISO 21:1983Shipbuilding — Inland navigation — Cable-lifters for stud-link anchor chainsISO 21:19851983-12-01
ISO 22:1975Flat transmission belts and corresponding pulleys — WidthsISO 22:19911975-05-01
ISO 23:1976Cinematography — Camera usage of 35 mm motion- picture film — SpecificationsISO 23:19931976-12-01
ISO 25:1976Cinematography — Camera usage of 16 mm motion-picture film — SpecificationsISO 25:19941976-07-01
ISO 26:1977Cinematography — Projector usage of 16 mm motion-picture films for direct front projection — SpecificationsISO 26:19851977-11-01
ISO 26:1985Cinematography — Projector usage of 16 mm motion-picture films for direct front projection — SpecificationsISO 26:19931985-06-06
ISO 31-0:1981General principles concerning quantities, units and symbolsISO 31-0:19921981-07-01
ISO 31-0:1992Quantities and units — Part 0: General principlesISO 80000-1:20091992-07-23
ISO 31-0:1992/Amd 1:1998Quantities and units — Part 0: General principles — Amendment 1ISO 80000-1:20091998-12-20
ISO 31-0:1992/Amd 2:2005Quantities and units — Part 0: General principles — Amendment 2ISO 80000-1:20092005-10-05
ISO 31-1:1978Quantities and units of space and timeISO 31-1:19921978-03-01
ISO 31-1:1978/Amd 1:1985Quantities and units of space and time — Amendment 1ISO 31-1:19921985-08-08
ISO 31-1:1992Quantities and units — Part 1: Space and timeISO 80000-3:20061992-08-27
ISO 31-1:1992/Amd 1:1998Quantities and units — Part 1: Space and time — Amendment 1ISO 80000-3:20061998-12-20
ISO 31-2:1978Quantities and units of periodic and related phenomenaISO 31-2:19921978-03-01
ISO 31-2:1978/Amd 1:1985Quantities and units of periodic and related phenomena — Amendment 1ISO 31-2:19921985-08-08
ISO 31-2:1992Quantities and units — Part 2: Periodic and related phenomenaISO 80000-3:20061992-08-27
ISO 31-2:1992/Amd 1:1998Quantities and units — Part 2: Periodic and related phenomena — Amendment 1ISO 80000-3:20061998-12-20
ISO 31-3:1978Quantities and units of mechanicsISO 31-3:19921978-03-01
ISO 31-3:1978/Amd 1:1985Quantities and units of mechanics — Amendment 1ISO 31-3:19921985-08-08
ISO 31-3:1992Quantities and units — Part 3: MechanicsISO 80000-4:20061992-08-27
ISO 31-3:1992/Amd 1:1998Quantities and units — Part 3: Mechanics — Amendment 1ISO 80000-4:20061998-12-20
ISO 31-4:1978Quantities and units of heatISO 31-4:19921978-03-01
ISO 31-4:1978/Amd 1:1985Quantities and units of heat — Amendment 1ISO 31-4:19921985-08-08
ISO 31-4:1992Quantities and units — Part 4: HeatISO 80000-5:20071992-08-27
ISO 31-4:1992/Amd 1:1998Quantities and units — Part 4: Heat — Amendment 1ISO 80000-5:20071998-12-20
ISO 31-5:1979Quantities and units of electricity and magnetismISO 31-5:19921979-02-01
ISO 31-5:1979/Amd 1:1985Quantities and units of electricity and magnetism — Amendment 1ISO 31-5:19921985-08-08
ISO 31-5:1992Quantities and units — Part 5: Electricity and magnetismIEC 80000-6:20081992-11-12
ISO 31-5:1992/Amd 1:1998Quantities and units — Part 5: Electricity and magnetism — Amendment 1IEC 80000-6:20081998-12-20
ISO 31-6:1980Quantities and units of light and related electromagnetic radiationsISO 31-6:19921980-12-01
ISO 31-6:1980/Amd 1:1985Quantities and units of light and related electromagnetic radiations — Amendment 1ISO 31-6:19921985-08-08
ISO 31-6:1992Quantities and units — Part 6: Light and related electromagnetic radiationsISO 80000-7:20081992-08-27
ISO 31-6:1992/Amd 1:1998Quantities and units — Part 6: Light and related electromagnetic radiations — Amendment 1ISO 80000-7:20081998-12-20
ISO 31-7:1978Quantities and units of acousticsISO 31-7:19921978-03-01
ISO 31-7:1978/Amd 1:1985Quantities and units of acoustics — Amendment 1ISO 31-7:19921985-08-08
ISO 31-7:1992Quantities and units — Part 7: AcousticsISO 80000-8:2007 | ISO/CD 80000-81992-08-27ISO/CD 80000-8
ISO 31-7:1992/Amd 1:1998Quantities and units — Part 7: Acoustics — Amendment 1ISO 80000-8:20071998-12-20
ISO 31-8:1980Quantities and units of physical chemistry and molecular physicsISO 31-8:19921980-12-01
ISO 31-8:1980/Amd 1:1985Quantities and units of physical chemistry and molecular physics — Amendment 1ISO 31-8:19921985-08-08
ISO 31-8:1992Quantities and units — Part 8: Physical chemistry and molecular physicsISO 80000-9:20091992-12-17
ISO 31-8:1992/Amd 1:1998Quantities and units — Part 8: Physical chemistry and molecular physics — Amendment 1ISO 80000-9:20091998-12-20
ISO 31-9:1980Quantities and units of atomic and nuclear physicsISO 31-9:19921980-12-01
ISO 31-9:1980/Amd 1:1985Quantities and units of atomic and nuclear physics — Amendment 1ISO 31-9:19921985-08-08
ISO 31-9:1992Quantities and units — Part 9: Atomic and nuclear physicsISO 80000-10:20091992-08-27
ISO 31-9:1992/Amd 1:1998Quantities and units — Part 9: Atomic and nuclear physics — Amendment 1ISO 80000-10:20091998-12-20
ISO 31-10:1980Quantities and units of nuclear reactions and ionizing radiationsISO 31-10:19921980-12-01
ISO 31-10:1980/Amd 1:1985Quantities and units of nuclear reactions and ionizing radiations — Amendment 1ISO 31-10:19921985-08-08
ISO 31-10:1992Quantities and units — Part 10: Nuclear reactions and ionizing radiationsISO 80000-10:20091992-11-12
ISO 31-10:1992/Amd 1:1998Quantities and units — Part 10: Nuclear reactions and ionizing radiations — Amendment 1ISO 80000-10:20091998-12-20
ISO 31-11:1978Mathematical signs and symbols for use in the physical sciences and technologyISO 31-11:19921978-03-01
ISO 31-11:1992Quantities and units — Part 11: Mathematical signs and symbols for use in the physical sciences and technologyISO 80000-2:20091992-12-30
ISO 31-12:1981Dimensionless parametersISO 31-12:19921981-07-01
ISO 31-12:1992Quantities and units — Part 12: Characteristic numbersISO 80000-11:20081992-08-27
ISO 31-12:1992/Amd 1:1998Quantities and units — Part 12: Characteristic numbers — Amendment 1ISO 80000-11:20081998-12-20
ISO 31-13:1981Quantities and units of solid state physicsISO 31-13:19921981-07-01
ISO 31-13:1981/Amd 1:1985Quantities and units of solid state physics — Amendment 1ISO 31-13:19921985-08-08
ISO 31-13:1992Quantities and units — Part 13: Solid state physicsISO 80000-12:20091992-08-27
ISO 31-13:1992/Amd 1:1998Quantities and units — Part 13: Solid state physics — Amendment 1ISO 80000-12:20091998-12-20
ISO 34-1:1994Rubber, vulcanized or thermoplastic — Determination of tear strength — Part 1: Trouser, angle and crescent test piecesISO 34-1:20041994-02-10
ISO 34-1:1994/Cor 1:1999Rubber, vulcanized or thermoplastic — Determination of tear strength — Part 1: Trouser, angle and crescent test pieces — Technical Corrigendum 1ISO 34-1:20041999-10-21
ISO 34-1:2004Rubber, vulcanized or thermoplastic — Determination of tear strength — Part 1: Trouser, angle and crescent test piecesISO 34-1:20102004-03-24
ISO 34-1:2010Rubber, vulcanized or thermoplastic — Determination of tear strength — Part 1: Trouser, angle and crescent test piecesISO 34-1:20152010-09-03
ISO 34-1:2015Rubber, vulcanized or thermoplastic — Determination of tear strength — Part 1: Trouser, angle and crescent test piecesISO 34-1:20222015-06-02
ISO 34-2:1996Rubber, vulcanized or thermoplastic — Determination of tear strength — Part 2: Small (Delft) test piecesISO 34-2:20071996-12-19
ISO 34-2:2007Rubber, vulcanized or thermoplastic — Determination of tear strength — Part 2: Small (Delft) test piecesISO 34-2:20112007-07-11
ISO 34-2:2011Rubber, vulcanized or thermoplastic — Determination of tear strength — Part 2: Small (Delft) test piecesISO 34-2:20152011-10-28
ISO 34-2:2015Rubber, vulcanized or thermoplastic — Determination of tear strength — Part 2: Small (Delft) test piecesISO 34-2:20222015-06-02
ISO 34:1979Rubber, vulcanized — Determination of tear strength (trouser, angle and crescent test pieces)ISO 34-1:19941979-10-01
ISO 35:1982Rubber latex, natural — Determination of mechanical stabilityISO 35:19891982-04-01
ISO 35:1989Natural rubber latex concentrate — Determination of mechanical stabilityISO 35:19951989-09-21
ISO 35:1995Latex rubber, natural, concentrate — Determination of mechanical stabilityISO 35:20041995-10-12
ISO 36:1985Rubber, vulcanized — Determination of adhesion to textile fabricISO 36:19931985-12-12
ISO 36:1993Rubber, vulcanized or thermoplastic — Determination of adhesion to textile fabricISO 36:19991993-09-16
ISO 36:1999Rubber, vulcanized or thermoplastic — Determination of adhesion to textile fabricISO 36:20051999-11-25
ISO 36:2005Rubber, vulcanized or thermoplastic — Determination of adhesion to textile fabricsISO 36:20112005-10-10
ISO 36:2011Rubber, vulcanized or thermoplastic — Determination of adhesion to textile fabricsISO 36:20172011-09-05
ISO 36:2017Rubber, vulcanized or thermoplastic — Determination of adhesion to textile fabricsISO 36:20202017-05-29
ISO 37:1977Rubber, vulcanized — Determination of tensile stress-strain propertiesISO 37:19941977-10-01
ISO 37:1994Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain propertiesISO 37:20051994-05-05
ISO 37:2005Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain propertiesISO 37:20112005-08-03
ISO 37:2005/Cor 1:2008Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties — Technical Corrigendum 1ISO 37:20112008-01-15
ISO 37:2011Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain propertiesISO 37:20172011-12-09
ISO 37:2017Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain propertiesISO 37:20242017-11-10
ISO 43:1976Aircraft — Jacking padsISO 43:20161976-07-01
ISO 45:1980Aircraft — Pressure refuelling connectionsISO 45:19901980-05-01
ISO 48:1979Vulcanized rubbers — Determination of hardness (Hardness between 30 and 85 IRHD)ISO 48:19941979-10-01
ISO 48:1994Rubber, vulcanized or thermoplastic — Determination of hardness (hardness between 10 IRHD and 100 IRHD)ISO 48:2007 | ISO/CD 481994-05-05ISO/CD 48
ISO 48:1994/Amd 1:1999Rubber, vulcanized or thermoplastic — Determination of hardness (hardness between 10 IRHD and 100 IRHD) — Amendment 1ISO 48:20071999-08-26
ISO 48:2007Rubber, vulcanized or thermoplastic — Determination of hardness (hardness between 10 IRHD and 100 IRHD)ISO 48:20102007-06-11
ISO 48:2007/Cor 1:2009Rubber, vulcanized or thermoplastic — Determination of hardness (hardness between 10 IRHD and 100 IRHD) — Technical Corrigendum 1ISO 48:20102009-01-15
ISO 48:2010Rubber, vulcanized or thermoplastic — Determination of hardness (hardness between 10 IRHD and 100 IRHD)ISO 48-2:20182010-09-03
ISO 49:1983Malleable cast iron fittings threaded to ISO 7/1ISO 49:19941983-05-01
ISO 53:1974Cylindrical gears for general and heavy engineering — Basic rackISO 53:19981974-08-01
ISO 54:1977Cylindrical gears for general engineering and for heavy engineering — Modules and diametral pitchesISO 54:19961977-05-01
ISO 60:1977Plastics — Determination of apparent density of material that can be poured from a specified funnelISO 60:20231977-08-01
ISO 61:1976Plastics — Determination of apparent density of moulding material that cannot be poured from a specified funnelISO 61:20231976-06-01
ISO 62:1980Plastics — Determination of water absorptionISO 62:19991980-09-01
ISO 62:1999Plastics — Determination of water absorptionISO/DIS 62 | ISO 62:20081999-02-04ISO/DIS 62
ISO 63:1975Flat transmission belts — LengthsISO 22:19911975-05-01
ISO 64:1974Withdrawal of ISO 64-1974ISO 4200:19911974-05-01
ISO 68-1:1998ISO general purpose screw threads — Basic profile — Part 1: Metric screw threadsISO 68-1:20231998-12-20
ISO 68-1:1998/Amd 1:2020ISO general purpose screw threads — Basic profile — Part 1: Metric screw threads — Amendment 1ISO 68-1:20232020-01-31
ISO 68-2:1998ISO general purpose screw threads — Basic profile — Part 2: Inch screw threadsISO 68-2:20231998-12-20
ISO 68-2:1998/Amd 1:2020ISO general-purpose screw threads — Basic profile — Part 2: Inch screw threads — Amendment 1: The dimensions of basic profileISO 68-2:20232020-01-31
ISO 68:1973ISO general purpose screw threads — Basic profileISO 68-2:1998 | ISO 68-1:19981973-05-01
ISO 69:1972Cinematography — 16 mm motion-picture raw stock film — Cutting and perforating dimensionsISO 69:19901972-12-01
ISO 69:1990Cinematography — 16 mm motion-picture and magnetic film — Cutting and perforating dimensionsISO 69:19981990-06-28
ISO 71:1977Cinematography — 16 mm negative photographic sound record on 16 mm, 35/16 mm and 35/32 mm motion-picture film — Positions and dimensionsISO 71:20141977-08-01
ISO 75-1:1993Plastics — Determination of temperature of deflection under load — Part 1: General test methodISO 75-1:20041993-08-26
ISO 75-1:2004Plastics — Determination of temperature of deflection under load — Part 1: General test methodISO 75-1:20132004-05-12
ISO 75-1:2013Plastics — Determination of temperature of deflection under load — Part 1: General test methodISO 75-1:20202013-04-09
ISO 75-2:1993Plastics — Determination of temperature of deflection under load — Part 2: Plastics and eboniteISO 75-2:20041993-08-26
ISO 75-2:2004Plastics — Determination of temperature of deflection under load — Part 2: Plastics and eboniteISO 75-2:20132004-05-12
ISO 75-3:1993Plastics — Determination of temperature of deflection under load — Part 3: High-strength thermosetting laminates and long-fibre-reinforced plasticsISO 75-3:20041993-08-26
ISO 75-3:2004Plastics — Determination of temperature of deflection under load — Part 3: High-strength thermosetting laminates and long-fibre-reinforced plasticsISO 75-3:20252004-05-12
ISO 75:1974Plastics and ebonite — Determination of temperature of deflection under loadISO 75:19871974-11-01
ISO 75:1987Plastics and ebonite — Determination of temperature of deflection under loadISO 75-2:1993 | ISO 75-3:1993 | ISO 75-1:19931987-03-26
ISO 76:1978Rolling bearings — Static load ratingsISO 76:19871978-06-01
ISO 76:1987Rolling bearings — Static load ratingsISO 76:20061987-02-05
ISO 76:1987/Amd 1:1999Rolling bearings — Static load ratings — Amendment 1: Annex A (informative) — Discontinuities in the calculation of basic static load ratingsISO 76:20061999-11-04
ISO 78-2:1982Layouts for standards — Part 2: Standard for chemical analysisISO 78-2:19991982-04-01
ISO 78-4:1983Layouts for standards — Part 4: Standard for atomic absorption spectrometric analysisISO/CD 78-41983-02-01ISO/CD 78-4
ISO 82:1974Steel — Tensile testingISO 6892:19841974-08-01
ISO 83:1976Steel — Charpy impact test (U-notch)ISO 148-1:20061976-11-01
ISO 86:1974Steel — Tensile testing of sheet and strip less than 3 mm and not less than 0,5 mm thickISO 6892:19841974-08-01
ISO 89:1974Steel — Tensile testing of wireISO 6892:19841974-08-01
ISO 90-1:1986Light gauge metal containers — Definitions and determination methods for dimensions and capacities — Part 1: Open-top cansISO 90-1:19971986-11-27
ISO 90-2:1986Light gauge metal containers — Definitions and determination methods for dimensions and capacities — Part 2: General use containersISO 90-2:19971986-12-04
ISO 90-3:1986Light gauge metal containers — Definitions and determination methods for dimensions and capacities — Part 3: Aerosol cansISO 90-3:20001986-12-04
ISO 90-3:1986/Amd 1:1994Light gauge metal containers — Definitions and determination methods for dimensions and capacities — Part 3: Aerosol cans — Amendment 1: Dimensions of the top end of three-piece necked-in tinplate cansISO 90-3:20001994-09-08
ISO 90:1977Hermetically sealed metal cans for food and drinks — SpecificationsISO 90-3:1986 | ISO 90-1:1986 | ISO 90-2:19861977-06-01
ISO 91-1:1982Petroleum measurement tables — Part 1: Tables based on reference temperatures of 15 degrees C and 60 degrees FISO 91-1:19921982-02-01
ISO 91-1:1992Petroleum measurement tables — Part 1: Tables based on reference temperatures of 15 degrees C and 60 degrees FISO 91:20171992-11-12
ISO 91-2:1991Petroleum measurement tables — Part 2: Tables based on a reference temperature of 20 degrees CISO 91:20171991-11-14
ISO 93-1:1982Textile machinery and accessories — Cylindrical sliver cans — Part 1: Main dimensionsISO 93-1:19981982-12-01
ISO 93-1:1998Textile machinery and accessories — Cylindrical sliver cans — Part 1: Main dimensionsISO 93-1:20061998-12-17
ISO 93-2:1978Textile machinery and accessories — Cylindrical sliver cans — Part 2: Spring bottomsISO 93-2:19991978-11-01
ISO 93-2:1999Textile machinery and accessories — Cylindrical sliver cans — Part 2: Spring bottomsISO 93-2:20061999-05-13
ISO 96-1:1992Textile machinery and accessories — Rings and travellers for ring spinning and ring doubling frames — Part 1: T-rings and their appropriate travellersISO 96-1:20091992-01-23
ISO 96-1:2009Textile machinery and accessories — Rings and travellers for ring spinning and ring twisting frames — Part 1: Flange rings T and SF and their travellersISO 96-1:20162009-03-10
ISO 96-2:1992Textile machinery and accessories — Rings and travellers for ring spinning and ring doubling frames — Part 2: HZCH-, HZ- and J-rings and their appropriate travellersISO 96-2:20091992-01-23
ISO 96:1981Textile machinery and accessories — Rings for ring-spinning and ring-doubling frames for 'C' and 'EL' travellers — Principal dimensionsISO 96-1:19921981-11-01
ISO 97:1975Textile machinery and accessories — Rings for spinning, doubling and twisting for ear-shaped travellersISO 96-2:19921975-11-01
ISO 98:1977Textile machinery and accessories — Spinning preparatory and spinning machinery — Covering characteristics of top rollersISO 98:20011977-05-01
ISO 99:1975Pulleys for flat transmission belts — DiametersISO 22:19911975-05-01
ISO 100:1975Pulleys for flat transmission belts — CrownsISO 100:19841975-05-01
ISO 100:1984Pulleys for flat transmission belts — CrownsISO 22:19911984-04-01
ISO 102:1976Aircraft — Gravity filling orificesISO 102:19901976-04-01
ISO 104:1979Rolling bearings — Thrust bearings with flat back faces — Boundary dimensionsISO 104:19941979-12-01
ISO 104:1994Rolling bearings — Thrust bearings — Boundary dimensions, general planISO 104:20021994-12-22
ISO 104:2002Rolling bearings — Thrust bearings — Boundary dimensions, general planISO 104:20152002-02-28
ISO 105-A01:1987Textiles — Tests for colour fastness — Part A01: General principles of testingISO 105-A01:19891987-12-10
ISO 105-A01:1989Textiles — Tests for colour fastness — Part A01: General principles of testingISO 105-A01:19941989-12-07
ISO 105-A01:1994Textiles — Tests for colour fastness — Part A01: General principles of testingISO 105-A01:20101994-08-04
ISO 105-A02:1987Textiles — Tests for colour fastness — Part A02: Grey scale for assessing change in colourISO 105-A02:19931987-12-03
ISO 105-A03:1987Textiles — Tests for colour fastness — Part A03: Grey scale for assessing stainingISO 105-A03:19931987-12-03
ISO 105-A03:1993Textiles — Tests for colour fastness — Part A03: Grey scale for assessing stainingISO 105-A03:20191993-08-26
ISO 105-A03:1993/Cor 1:1997Textiles — Tests for colour fastness — Part A03: Grey scale for assessing staining — Technical Corrigendum 1: (Applies to French version only)ISO 105-A03:20191997-02-13
ISO 105-A03:1993/Cor 2:2005Textiles — Tests for colour fastness — Part A03: Grey scale for assessing staining — Technical Corrigendum 2ISO 105-A03:20192005-10-04
ISO 105-A:1984Textiles — Tests for colour fastness — Part A: General principlesISO 105-A03:1987 | ISO 105-A01:1989 | ISO 105-A02:19871984-11-01
ISO 105-B01:1988Textiles — Tests for colour fastness — Part B01: Colour fastness to light : DaylightISO 105-B01:19891988-04-28
ISO 105-B01:1989Textiles — Tests for colour fastness — Part B01: Colour fastness to light: DaylightISO 105-B01:19941989-12-21
ISO 105-B01:1994Textiles — Tests for colour fastness — Part B01: Colour fastness to light: DaylightISO 105-B01:20141994-11-17
ISO 105-B01:1994/Amd 1:1998Textiles — Tests for colour fastness — Part B01: Colour fastness to light: Daylight — Amendment 1ISO 105-B01:20141998-03-05
ISO 105-B02:1988Textiles — Tests for colour fastness — Part B02: Colour fastness to artificial light : Xenon arc fading lamp testISO 105-B02:19941988-04-28
ISO 105-B02:1994Textiles — Tests for colour fastness — Part B02: Colour fastness to artificial light: Xenon arc fading lamp testISO 105-B02:20131994-09-15
ISO 105-B02:1994/Amd 1:1998Textiles — Tests for colour fastness — Part B02: Colour fastness to artificial light: Xenon arc fading lamp test — Amendment 1ISO 105-B02:20131998-07-30
ISO 105-B02:1994/Amd 2:2000Textiles — Tests for colour fastness — Part B02: Colour fastness to artificial light: Xenon arc fading lamp test — Amendment 2: .ISO 105-B02:20132000-11-23
ISO 105-B02:2013Textiles — Tests for colour fastness — Part B02: Colour fastness to artificial light: Xenon arc fading lamp testISO 105-B02:20142013-05-14
ISO 105-B03:1988Textiles — Tests for colour fastness — Part B03: Colour fastness to weathering: Outdoor exposureISO 105-B03:19941988-04-28
ISO 105-B03:1994Textiles — Tests for colour fastness — Part B03: Colour fastness to weathering: Outdoor exposureISO 105-B03:20171994-11-17
ISO 105-B04:1988Textiles — Tests for colour fastness — Part B04: Colour fastness to weathering : Xenon arcISO 105-B04:19941988-04-28
ISO 105-B04:1994Textiles — Tests for colour fastness — Part B04: Colour fastness to artificial weathering: Xenon arc fading lamp testISO 105-B04:20241994-11-17
ISO 105-B05:1988Textiles — Tests for colour fastness — Part B05: Detection and assessment of photochromismISO 105-B05:19931988-04-28
ISO 105-B06:1992Textiles — Tests for colour fastness — Part B06: Colour fastness to artificial light at high temperatures: Xenon arc fading lamp testISO 105-B06:19981992-10-29
ISO 105-B06:1998Textiles — Tests for colour fastness — Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp testISO 105-B06:20201998-11-05
ISO 105-B06:1998/Amd 1:2002Textiles — Tests for colour fastness — Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test — Amendment 1ISO 105-B06:20202002-09-19
ISO 105-B:1984Textiles — Tests for colour fastness — Part B: Colour fastness to light and weatheringISO 105-B03:1988 | ISO 105-B04:1988 | ISO 105-B01:1989 | ISO 105-B05:1988 | ISO 105-B02:19881984-09-01
ISO 105-C01:1987Textiles — Tests for colour fastness — Part C01: Colour fastness to washing: Test 1ISO 105-C01:19891987-12-17
ISO 105-C01:1989Textiles — Tests for colour fastness — Part C01: Colour fastness to washing: Test 1ISO 105-C10:20061989-12-21
ISO 105-C02:1987Textiles — Tests for colour fastness — Part C02: Colour fastness to washing : Test 2ISO 105-C02:19891987-12-17
ISO 105-C02:1989Textiles — Tests for colour fastness — Part C02: Colour fastness to washing: Test 2ISO 105-C10:20061989-12-14
ISO 105-C03:1987Textiles — Tests for colour fastness — Part C03: Colour fastness to washing: Test 3ISO 105-C03:19891987-12-17
ISO 105-C03:1989Textiles — Tests for colour fastness — Part C03: Colour fastness to washing: Test 3ISO 105-C10:20061989-12-21
ISO 105-C04:1987Textiles — Tests for colour fastness — Part C04: Colour fastness to washing : Test 4ISO 105-C04:19891987-12-17
ISO 105-C04:1989Textiles — Tests for colour fastness — Part C04: Colour fastness to washing: Test 4ISO 105-C10:20061989-12-21
ISO 105-C05:1987Textiles — Tests for colour fastness — Part C05: Colour fastness to washing : Test 5ISO 105-C05:19891987-12-17
ISO 105-C05:1989Textiles — Tests for colour fastness — Part C05: Colour fastness to washing: Test 5ISO 105-C10:20061989-12-21
ISO 105-C06:1987Textiles — Tests for colour fastness — Part C06: Colour fastness to domestic and commercial launderingISO 105-C06:19941987-12-17
ISO 105-C06:1994Textiles — Tests for colour fastness — Part C06: Colour fastness to domestic and commercial launderingISO 105-C06:20101994-08-11
ISO 105-C06:1994/Cor 1:2002Textiles — Tests for colour fastness — Part C06: Colour fastness to domestic and commercial laundering — Technical Corrigendum 1ISO 105-C06:20102002-02-14
ISO 105-C06:1994/Cor 2:2002Textiles — Tests for colour fastness — Part C06: Colour fastness to domestic and commercial laundering — Technical Corrigendum 2ISO 105-C06:20102002-06-06
ISO 105-C08:2001Textiles — Tests for colour fastness — Part C08: Colour fastness to domestic and commercial laundering using a non-phosphate reference detergent incorporating a low temperature bleach activatorISO 105-C08:20102001-09-13
ISO 105-C08:2001/Amd 1:2006Textiles — Tests for colour fastness — Part C08: Colour fastness to domestic and commercial laundering using a non-phosphate reference detergent incorporating a low temperature bleach activator — Amendment 1ISO 105-C08:20102006-05-24
ISO 105-C08:2001/Cor 1:2002Textiles — Tests for colour fastness — Part C08: Colour fastness to domestic and commercial laundering using a non-phosphate reference detergent incorporating a low temperature bleach activator — Technical Corrigendum 1ISO 105-C08:20102002-06-06
ISO 105-C09:2001/Cor 1:2002Textiles — Tests for colour fastness — Part C09: Colour fastness to domestic and commercial laundering — Oxidative bleach response using a non-phosphate reference detergent incorporating a low temperature bleach activator — Technical Corrigendum 1ISO/DIS 105-C092002-06-06ISO/DIS 105-C09
ISO 105-C12:2004Textiles - Tests for colour fastness — Part C12: Colour fastness to industrial launderingISO 105-C12:20242004-11-08
ISO 105-C12:2004/Cor 1:2007Textiles - Tests for colour fastness — Part C12: Colour fastness to industrial laundering — Technical Corrigendum 1ISO 105-C12:20242007-03-16
ISO 105-C:1982Textiles — Tests for colour fastness — Part C: Colour fastness to washing and launderingISO 105-C01:1989 | ISO 105-C03:1989 | ISO 105-C05:1989 | ISO 105-C02:1989 | ISO 105-C06:1987 | ISO 105-C04:19891982-09-01
ISO 105-D01:1987Textiles — Tests for colour fastness — Part D01: Colour fastness to dry cleaningISO 105-D01:19931987-12-17
ISO 105-D01:1993Textiles — Tests for colour fastness — Part D01: Colour fastness to dry cleaningISO 105-D01:20101993-10-21
ISO 105-D02:1987Textiles — Tests for colour fastness — Part D02: Colour fastness to rubbing: Organic solventsISO 105-D02:19931987-12-17
ISO 105-D02:1993Textiles — Tests for colour fastness — Part D02: Colour fastness to rubbing: Organic solventsISO 105-D02:20161993-10-21
ISO 105-D:1982Textiles — Tests for colour fastness — Part D: Colour fastness to dry cleaningISO 105-D02:1987 | ISO 105-D01:19871982-09-01
ISO 105-E01:1987Textiles — Tests for colour fastness — Part E01: Colour fastness to waterISO 105-E01:19891987-12-17
ISO 105-E01:1989Textiles — Tests for colour fastness — Part E01: Colour fastness to waterISO 105-E01:19941989-12-07
ISO 105-E01:1994Textiles — Tests for colour fastness — Part E01: Colour fastness to waterISO 105-E01:20101994-09-01
ISO 105-E01:1994/Cor 1:2002Textiles — Tests for colour fastness — Part E01: Colour fastness to water — Technical Corrigendum 1ISO 105-E01:20102002-02-14
ISO 105-E01:2010Textiles — Tests for colour fastness — Part E01: Colour fastness to waterISO 105-E01:20132010-04-13
ISO 105-E02:1987Textiles — Tests for colour fastness — Part E02: Colour fastness to sea waterISO 105-E02:19891987-12-17
ISO 105-E02:1989Textiles — Tests for colour fastness — Part E02: Colour fastness to sea waterISO 105-E02:19941989-12-14
ISO 105-E02:1994Textiles — Tests for colour fastness — Part E02: Colour fastness to sea waterISO 105-E02:20131994-09-01
ISO 105-E02:1994/Cor 1:2002Textiles — Tests for colour fastness — Part E02: Colour fastness to sea water — Technical Corrigendum 1ISO 105-E02:20132002-02-14
ISO 105-E03:1987Textiles — Tests for colour fastness — Part E03: Colour fastness to chlorinated water (swimming-bath water)ISO 105-E03:19941987-12-17
ISO 105-E03:1994Textiles — Tests for colour fastness — Part E03: Colour fastness to chlorinated water (swimming-pool water)ISO 105-E03:20101994-09-01
ISO 105-E04:1987Textiles — Tests for colour fastness — Part E04: Colour fastness to perspirationISO 105-E04:19891987-12-17
ISO 105-E04:1989Textiles — Tests for colour fastness — Part E04: Colour fastness to perspirationISO 105-E04:19941989-12-14
ISO 105-E04:1994Textiles — Tests for colour fastness — Part E04: Colour fastness to perspirationISO 105-E04:20081994-09-15
ISO 105-E04:1994/Cor 1:2002Textiles — Tests for colour fastness — Part E04: Colour fastness to perspiration — Technical Corrigendum 1ISO 105-E04:20082002-02-14
ISO 105-E04:2008Textiles — Tests for colour fastness — Part E04: Colour fastness to perspirationISO 105-E04:20132008-09-10
ISO 105-E05:1987Textiles — Tests for colour fastness — Part E05: Colour fastness to spotting : AcidISO 105-E05:19891987-12-17
ISO 105-E05:1989Textiles — Tests for colour fastness — Part E05: Colour fastness to spotting: AcidISO 105-E05:20061989-12-07
ISO 105-E05:1989/Cor 1:2002Textiles — Tests for colour fastness — Part E05: Colour fastness to spotting: Acid — Technical Corrigendum 1ISO 105-E05:20062002-02-14
ISO 105-E05:2006Textiles — Tests for colour fastness — Part E05: Colour fastness to spotting: AcidISO 105-E05:20102006-06-21
ISO 105-E06:1987Textiles — Tests for colour fastness — Part E06: Colour fastness to spotting : AlkaliISO 105-E06:19891987-12-17
ISO 105-E06:1989Textiles — Tests for colour fastness — Part E06: Colour fastness to spotting: AlkaliISO 105-E06:20061989-12-14
ISO 105-E06:1989/Cor 1:2002Textiles — Tests for colour fastness — Part E06: Colour fastness to spotting: Alkali — Technical Corrigendum 1ISO 105-E06:20062002-02-14
ISO 105-E07:1987Textiles — Tests for colour fastness — Part E07: Colour fastness to spotting : WaterISO 105-E07:19891987-12-17
ISO 105-E07:1989Textiles — Tests for colour fastness — Part E07: Colour fastness to spotting: WaterISO 105-E07:20101989-12-14
ISO 105-E07:1989/Cor 1:2002Textiles — Tests for colour fastness — Part E07: Colour fastness to spotting: Water — Technical Corrigendum 1ISO 105-E07:20102002-02-14
ISO 105-E08:1987Textiles — Tests for colour fastness — Part E08: Colour fastness to water : Hot waterISO 105-E08:19941987-12-17
ISO 105-E09:1987Textiles — Tests for colour fastness — Part E09: Colour fastness to pottingISO 105-E09:19891987-12-17
ISO 105-E09:1989Textiles — Tests for colour fastness — Part E09: Colour fastness to pottingISO 105-E09:20101989-12-14
ISO 105-E09:1989/Cor 1:2002Textiles — Tests for colour fastness — Part E09: Colour fastness to potting — Technical Corrigendum 1ISO 105-E09:20102002-02-14
ISO 105-E10:1987Textiles — Tests for colour fastness — Part E10: Colour fastness to decatizingISO 105-E10:19941987-12-17
ISO 105-E11:1987Textiles — Tests for colour fastness — Part E11: Colour fastness to steamingISO 105-E11:19941987-12-17
ISO 105-E12:1987Textiles — Tests for colour fastness — Part E12: Colour fastness to milling : Alkaline millingISO 105-E12:19891987-12-17
ISO 105-E12:1989Textiles — Tests for colour fastness — Part E12: Colour fastness to milling: Alkaline millingISO 105-E12:20101989-12-14
ISO 105-E12:1989/Amd 1:2002Textiles — Tests for colour fastness — Part E12: Colour fastness to milling: Alkaline milling — Amendment 1ISO 105-E12:20102002-11-15
ISO 105-E12:1989/Cor 1:2002Textiles — Tests for colour fastness — Part E12: Colour fastness to milling: Alkaline milling — Technical Corrigendum 1ISO 105-E12:20102002-02-14
ISO 105-E13:1987Textiles — Tests for colour fastness — Part E13: Colour fastness to acid-felting : SevereISO 105-E13:19941987-12-17
ISO 105-E14:1987Textiles — Tests for colour fastness — Part E14: Colour fastness to acid-felting: MildISO 105-E14:19941987-12-17
ISO 105-E:1978Textiles — Tests for colour fastness — Part E: Colour fastness to aqueous agenciesISO 105-E02:1989 | ISO 105-E11:1987 | ISO 105-E03:1987 | ISO 105-E06:1989 | ISO 105-E07:1989 | ISO 105-E12:1989 | ISO 105-E08:1987 | ISO 105-E04:1989 | ISO 105-E13:1987 | ISO 105-E01:1989 | ISO 105-E14:1987 | ISO 105-E05:1989 | ISO 105-E09:1989 | ISO 105-E10:19871978-12-01
ISO 105-F:1982Textiles — Tests for colour fastness — Part F: Standard adjacent fabricsISO 105-F:19851982-09-01
ISO 105-F:1985Textiles — Tests for colour fastness — Part F: Standard adjacent fabricsISO 105-F02:2009 | ISO 105-F05:2001 | ISO 105-F01:2001 | ISO/DIS 105-F02 | ISO 105-F09:2009 | ISO 105-F07:2001 | ISO 105-F03:2001 | ISO/DIS 105-F09 | ISO 105-F04:20011985-10-24ISO/DIS 105-F02 | ISO/DIS 105-F09
ISO 105-G01:1993Textiles — Tests for colour fastness — Part G01: Colour fastness to nitrogen oxidesISO/NP 105-G01 | ISO 105-G01:2016 | ISO/WD 105-G011993-09-30ISO/NP 105-G01 | ISO/WD 105-G01
ISO 105-G01:1993/Cor 1:1995Textiles — Tests for colour fastness — Part G01: Colour fastness to nitrogen oxides — Technical Corrigendum 1ISO/NP 105-G01 | ISO 105-G01:2016 | ISO/WD 105-G011995-10-26ISO/NP 105-G01 | ISO/WD 105-G01
ISO 105-G04:1989Textiles — Tests for colour fastness — Part G04: Colour fastness to oxides of nitrogen in the atmosphere at high humiditiesISO 105-G04:20161989-12-07
ISO 105-G:1978Textiles — Tests for colour fastness — Part G: Colour fastness to atmospheric contaminantsISO 105-G01:19931978-12-01
ISO 105-J01:1987Textiles — Tests for colour fastness — Part J01: Method for the measurement of colour and colour differencesISO 105-J01:19891987-12-10
ISO 105-J01:1989Textiles — Tests for colour fastness — Part J01: Measurement of colour and colour differencesISO 105-J01:19971989-12-07
ISO 105-J02:1987Textiles — Tests for colour fastness — Part J02: Method for the instrumental assessment of whitenessISO 105-J02:19971987-12-10
ISO 105-J03:1995Textiles — Tests for colour fastness — Part J03: Calculation of colour differencesISO 105-J03:20091995-08-17
ISO 105-J03:1995/Cor 1:1996Textiles — Tests for colour fastness — Part J03: Calculation of colour differences — Technical Corrigendum 1ISO 105-J03:20091996-06-06
ISO 105-J03:1995/Cor 2:2006Textiles — Tests for colour fastness — Part J03: Calculation of colour differences — Technical Corrigendum 2ISO 105-J03:20092006-03-24
ISO 105-J:1982Textiles — Tests for colour fastness — Part J: Measurement of colour and colour differencesISO 105-J01:1989 | ISO 105-J02:19871982-09-01
ISO 105-N:1978Textiles — Tests for colour fastness — Part N: Colour fastness to bleaching agenciesISO 105-N01:19931978-12-01
ISO 105-P02:1993Textiles — Tests for colour fastness — Part P02: Colour fastness to pleating: Steam pleatingISO 105-P02:20021993-09-23
ISO 105-P02:1993/Cor 1:1999Textiles — Tests for colour fastness — Part P02: Colour fastness to pleating: Steam pleating — Technical Corrigendum 1ISO 105-P02:20021999-05-06
ISO 105-P:1978Textiles — Tests for colour fastness — Part P: Colour fastness to heat treatmentsISO 105-P01:19931978-12-01
ISO 105-S:1978Textiles — Tests for colour fastness — Part S: Colour fastness to vulcanizingISO 105-S01:19931978-08-01
ISO 105-X01:1987Textiles — Tests for colour fastness — Part X01: Colour fastness to carbonizing : Aluminium chlorideISO 105-X01:19931987-12-17
ISO 105-X02:1987Textiles — Tests for colour fastness — Part X02: Colour fastness to carbonizing: Sulphuric acidISO 105-X02:19931987-12-17
ISO 105-X04:1987Textiles — Tests for colour fastness — Part X04: Colour fastness to mercerizingISO 105-X04:19941987-12-17
ISO 105-X05:1987Textiles — Tests for colour fastness — Part X05: Colour fastness to organic solventsISO 105-X05:19941987-12-17
ISO 105-X06:1987Textiles — Tests for colour fastness — Part X06: Colour fastness to soda boilingISO 105-X06:19941987-12-17
ISO 105-X07:1987Textiles — Tests for colour fastness — Part X07: Colour fastness to cross-dyeing : WoolISO 105-X07:19941987-12-17
ISO 105-X08:1987Textiles — Tests for colour fastness — Part X08: Colour fastness to degummingISO 105-X08:19941987-12-17
ISO 105-X09:1987Textiles — Tests for colour fastness — Part X09: Colour fastness to formaldehydeISO 105-X09:19931987-12-17
ISO 105-X10:1987Textiles — Tests for colour fastness — Part X10: Assessment of migration of textile colours into polyvinyl chloride coatingsISO 105-X10:19931987-12-17
ISO 105-X11:1987Textiles — Tests for colour fastness — Part X11: Colour fastness to hot pressingISO 105-X11:19941987-12-17
ISO 105-X11:1994Textiles — Tests for colour fastness — Part X11: Colour fastness to hot pressingISO 105-X11:2026 | ISO/PWI 105-X111994-09-01ISO/PWI 105-X11
ISO 105-X12:1987Textiles — Tests for colour fastness — Part X12: Colour fastness to rubbingISO 105-X12:19931987-12-17
ISO 105-X12:1993Textiles — Tests for colour fastness — Part X12: Colour fastness to rubbingISO 105-X12:20011993-08-26
ISO 105-X12:2001Textiles — Tests for colour fastness — Part X12: Colour fastness to rubbingISO 105-X12:20162001-05-10
ISO 105-X13:1987Textiles — Tests for colour fastness — Part X13: Colour fastness of wool dyes to processes using chemical means for creasing, pleating and settingISO 105-X13:19941987-12-17
ISO 105-X14:1987Textiles — Tests for colour fastness — Part X14: Colour fastness to acid chlorination of wool : Sodium dichloroisocyanurateISO 105-X14:19941987-12-17
ISO 105-X16:2001Textiles — Tests for colour fastness — Part X16: Colour fastness to rubbing — Small areasISO 105-X16:20162001-05-17
ISO 105-X:1984Textiles — Tests for colour fastness — Part X: Tests not included in parts A to S or part ZISO 105-X11:1987 | ISO 105-X08:1987 | ISO 105-X14:1987 | ISO 105-X12:1987 | ISO 105-X09:1987 | ISO 105-X01:1987 | ISO 105-X05:1987 | ISO 105-X02:1987 | ISO 105-X13:1987 | ISO 105-X06:1987 | ISO 105-X10:1987 | ISO 105-X07:1987 | ISO 105-X04:19871984-09-01
ISO 105-Z:1978Textiles — Tests for colour fastness — Part Z: Colorant characteristicsISO 105-Z01:19931978-12-01
ISO 111:1978Textile machinery and accessories — Cones for yarn winding (cross wound) — Half angle of the cone 4 degrees 20'ISO 8489-3:19951978-06-01
ISO 112:1983Textile machinery and accessories — Cones for yarn winding (cross wound) — Half angle of the cone 3 degrees 30'ISO 8489-2:19951983-05-01
ISO 113-1:1979Rolling bearing accessories — Part 1: Tapered sleevesISO 2982-1:1995 | ISO 113:19941979-04-01
ISO 113-2:1979Rolling bearing accessories — Part 2: Plummer block housingsISO 113:19941979-02-01
ISO 113:1994Rolling bearings — Plummer block housings — Boundary dimensionsISO 113:19991994-12-15
ISO 113:1999Rolling bearings — Plummer block housings — Boundary dimensionsISO 113:20101999-03-18
ISO 114:198099.8 Unalloyed magnesium ingots — Chemical compositionISO 8287:19841980-06-01
ISO 115:2003Unalloyed aluminium ingots for remelting — Classification and compositionISO 115:20242003-11-06
ISO 121:1980Magnesium-aluminium-zinc alloy ingots and alloy castings — Chemical composition and mechanical properties of sand cast reference test barsISO 16220:20001980-08-01
ISO 123:1974Rubber latex — SamplingISO 123:19851974-01-01
ISO 123:1985Rubber latex — SamplingISO 123:20011985-08-01
ISO 124:1974Rubber latices — Determination of total solids contentISO 124:1992 | ISO 124:19851974-04-01
ISO 124:1985Rubber latices — Determination of total solids contentISO 124:19921985-10-31
ISO 124:1992Rubber latices — Determination of total solids contentISO 124:19971992-03-05
ISO 124:1997Latex, rubber — Determination of total solids contentISO 124:20081997-06-05
ISO 124:1997/Amd 1:2006Latex, rubber — Determination of total solids content — Amendment 1: Precision dataISO 124:20082006-02-02
ISO 124:1997/Amd 2:2008Latex, rubber — Determination of total solids content — Amendment 2: Determination at temperatures higher than 105 degrees CISO 124:20082008-01-07
ISO 124:2008Latex, rubber — Determination of total solids contentISO 124:20112008-09-10
ISO 124:2011Latex, rubber — Determination of total solids contentISO 124:20142011-11-10
ISO 125:1983Rubber latex, natural — Determination of alkalinityISO 125:19901983-12-01
ISO 125:1990Natural rubber latex concentrate — Determination of alkalinityISO 125:20031990-01-18
ISO 125:2003Natural rubber latex concentrate — Determination of alkalinityISO 125:20112003-07-29
ISO 125:2011Natural rubber latex concentrate — Determination of alkalinityISO 125:20202011-11-10
ISO 126:1982Rubber latex, natural — Determination of dry rubber contentISO 126:19891982-05-01
ISO 126:1989Natural rubber latex concentrate — Determination of dry rubber contentISO 126:19951989-07-13
ISO 126:1989/Cor 1:1992Natural rubber latex concentrate — Determination of dry rubber content — Technical Corrigendum 1ISO 126:19951992-05-14
ISO 126:1995Latex, rubber, natural concentrate — Determination of dry rubber contentISO 126:20051995-12-07
ISO 127:1972Natural rubber latex — Determination of KOH numberISO 127:1995 | ISO 127:19841972-08-01
ISO 127:1984Rubber latex, natural — Determination of KOH numberISO 127:19951984-04-01
ISO 127:1995Rubber, natural latex concentrate — Determination of KOH numberISO 127:20121995-11-23
ISO 127:1995/Amd 1:2006Rubber, natural latex concentrate — Determination of KOH number — Amendment 1: Precision dataISO 127:20122006-02-02
ISO 127:2012Rubber, natural latex concentrate — Determination of KOH numberISO 127:20182012-04-04
ISO 128-1:2003Technical drawings — General principles of presentation — Part 1: Introduction and indexISO 128-1:20202003-01-30
ISO 128-2:2020Technical product documentation (TPD) — General principles of representation — Part 2: Basic conventions for linesISO 128-2:20222020-07-08
ISO 128-3:2020Technical product documentation (TPD) — General principles of representation — Part 3: Views, sections and cutsISO 128-3:20222020-06-18
ISO 128-20:1996Technical drawings — General principles of presentation — Part 20: Basic conventions for linesISO 128-2:20201996-11-14

Showing the first 400 of 24,640 records. Every record has its own page, with its source and the quoted line that states it; these list the rest.

Where this came from

Every record above links the page it was taken from and quotes the sentence that states it. These are the 1 source this dataset was assembled from.

Machine-readable

From your own code

Same records, same quotes, without scraping the page: refsource is on PyPI and npm. Each value comes back carrying the URL it was read from and the sentence on that page that states it — .source and .quote sit on the value itself rather than in a side channel, so the checking step is available instead of skipped.

pip install refsource
refsource lookup iso-standard-supersessions identifier="IEC 559:1982"

npx -y refsource lookup iso-standard-supersessions identifier="IEC 559:1982"

Set your AI assistant up to use this

Two files and no account. Put this in .mcp.json at the root of your project — Claude Code, Cursor, Windsurf, VS Code and Codex all read that file — and your assistant can look this dataset up instead of recalling it. The server is remote, keyless and read-only.

{
  "mcpServers": {
    "referencesource": {
      "type": "http",
      "url": "https://referencesource.org/mcp"
    }
  }
}

Add to Cursor · or, on the command line: claude mcp add --transport http referencesource https://referencesource.org/mcp --scope project

Then one line in the project's CLAUDE.md or AGENTS.md, so the assistant knows when to reach for it:

When a question needs "Withdrawn and superseded ISO standards", call the referencesource MCP server at https://referencesource.org/mcp (tool `search_records`, dataset_slug `iso-standard-supersessions`) instead of answering from memory — every record it returns carries its source URL and a verbatim quote from that page.

What each tool does, and the servers built over single registers: Connect your AI assistant.

24,640 records. last verified against source . due for re-check by .

Licence. ISO Open Data, published under the Open Data Commons Attribution License v1.0 (ODC-By 1.0), which explicitly permits reuse with attribution. Each record quotes the CSV row it was read from and links the file.