Records 12,401–12,800 — Withdrawn and superseded ISO standards

Records 12,401 to 12,800 of 24,640. Each links to its own page, which carries the source URL and the quoted line that states the value.

• ISO 10331:199118382,IS,,ISO 10331:1991,Photography — Unprocessed photographic films and papers — Storage practices,Photographie — Films et papiers photographiques non traités — Pratiques de stoc
• ISO 10332:199418383,IS,,ISO 10332:1994,Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes — Ultrasonic testing for the verification of hydraulic leak-tightness,T
• ISO 10338:199618389,IS,,ISO 10338:1996,Optics and optical instruments — Contact lenses — Determination of curvature,Optique et instruments d'optique — Lentilles de contact — Détermination de la
• ISO 10339:199718390,IS,,ISO 10339:1997,Ophthalmic optics — Contact lenses — Determination of water content of hydrogel lenses,Optique ophtalmique — Lentilles de contact — Détermination de la ten
• ISO 10340:199518391,IS,,ISO 10340:1995,Optics and optical instruments — Contact lenses — Method for determining the extractable substances,Optique et instruments d'optique — Lentilles de contact
• ISO 10341:199718392,IS,,ISO 10341:1997,Ophthalmic instruments — Refractor heads,Instruments ophtalmiques — Têtes de réfracteurs,1997-07-10,1,['11.040.70'],ISO/TC 172/SC 7,9599,,[52931],"['en','f
• ISO 10341:200952931,IS,,ISO 10341:2009,Ophthalmic instruments — Refractor heads,Instruments ophtalmiques — Têtes de réfracteurs,2009-06-24,2,['11.040.70'],ISO/TC 172/SC 7,9599,[18392],"[58077,61
• ISO 10342:199718393,IS,,ISO 10342:1997,Ophthalmic instruments — Eye refractometers,Instruments ophtalmiques — Réfractomètres,1997-10-02,1,['11.040.70'],ISO/TC 172/SC 7,9599,,[34276],"['en','fr']
• ISO 10342:200334276,IS,,ISO 10342:2003,Ophthalmic instruments — Eye refractometers,Instruments ophtalmiques — Réfractomètres,2003-05-16,2,['11.040.70'],ISO/TC 172/SC 7,9599,[18393],[54964],"['en
• ISO 10343:199718394,IS,,ISO 10343:1997,Ophthalmic instruments — Ophthalmometers,Instruments ophtalmiques — Ophtalmomètres,1997-07-10,1,['11.040.70'],ISO/TC 172/SC 7,9599,,[52932],"['en','fr']",6
• ISO 10343:200952932,IS,,ISO 10343:2009,Ophthalmic instruments — Ophthalmometers,Instruments ophtalmiques — Ophtalmomètres,2009-06-24,2,['11.040.70'],ISO/TC 172/SC 7,9599,[18394],[59705],"['en','
• ISO 10344:199618395,IS,,ISO 10344:1996,Optics and optical instruments — Contact lenses — Saline solution for contact lens testing,Optique et instruments d'optique — Lentilles de contact — Soluti
• ISO 10349-1:199218406,IS,,ISO 10349-1:1992,Photography — Photographic-grade chemicals — Test methods — Part 1: General,Photographie — Produits chimiques de qualité photographique — Méthodes d'essa
• ISO 10349-8:199221265,IS,,ISO 10349-8:1992,Photography — Photographic-grade chemicals — Test methods — Part 8: Determination of volatile matter,Photographie — Produits chimiques de qualité photogr
• ISO 10350-1:199825170,IS,,ISO 10350-1:1998,Plastics — Acquisition and presentation of comparable single-point data — Part 1: Moulding materials,Plastiques — Acquisition et présentation de caractér
• ISO 10350-1:200739597,IS,,ISO 10350-1:2007,Plastics — Acquisition and presentation of comparable single-point data — Part 1: Moulding materials,Plastiques — Acquisition et présentation de caractér
• ISO 10350-1:2007/Amd 1:201459439,IS,Amd,ISO 10350-1:2007/Amd 1:2014,Plastics — Acquisition and presentation of comparable single-point data — Part 1: Moulding materials — Amendment 1,Plastiques — Acquisition
• ISO 10350-1:201770314,IS,,ISO 10350-1:2017,Plastics — Acquisition and presentation of comparable single-point data — Part 1: Moulding materials,Plastiques — Acquisition et présentation de caractér
• ISO 10350-2:200128168,IS,,ISO 10350-2:2001,Plastics — Acquisition and presentation of comparable single-point data — Part 2: Long-fibre-reinforced plastics,Plastiques — Acquisition et présentation
• ISO 10350-2:201145088,IS,,ISO 10350-2:2011,Plastics — Acquisition and presentation of comparable single-point data — Part 2: Long-fibre-reinforced plastics,Plastiques — Acquisition et présentation
• ISO 10350:199318407,IS,,ISO 10350:1993,Plastics — Acquisition and presentation of comparable single-point data,Plastiques — Acquisition et présentation de caractéristiques intrinsèques comparabl
• ISO 10351:199218408,IS,,ISO 10351:1992,Plastics — Determination of the combustibility of specimens using a 125 mm flame source,Plastiques — Détermination de la combustibilité d'éprouvettes soumi
• ISO 10352:199118409,IS,,ISO 10352:1991,Fibre-reinforced plastics — Moulding compounds and prepregs — Determination of mass per unit area,Plastiques renforcés de fibres — Préimprégnés — Détermina
• ISO 10352:199723133,IS,,ISO 10352:1997,Fibre-reinforced plastics — Moulding compounds and prepregs — Determination of mass per unit area,Plastiques renforcés — Préimprégnés — Détermination de la
• ISO 10352:201050602,IS,,ISO 10352:2010,Fibre-reinforced plastics — Moulding compounds and prepregs — Determination of mass per unit area,Plastiques renforcés de fibres — Mélanges à mouler et pré
• ISO 10355:199418412,IS,,ISO 10355:1994,Mopeds — Positioning of lighting and light-signalling devices,Cyclomoteurs — Position des dispositifs d'éclairage et de signalisation lumineuse,1994-11-24,
• ISO 10360-2:199418419,IS,,ISO 10360-2:1994,Coordinate metrology — Part 2: Performance assessment of coordinate measuring machines,Métrologie par coordonnées — Partie 2: Évaluation des performances
• ISO 10360-2:200129646,IS,,ISO 10360-2:2001,Geometrical Product Specifications (GPS) — Acceptance and reverification tests for coordinate measuring machines (CMM) — Part 2: CMMs used for measuring
• ISO 10360-4:200025893,IS,,ISO 10360-4:2000,Geometrical Product Specifications (GPS) — Acceptance and reverification tests for coordinate measuring machines (CMM) — Part 4: CMMs used in scanning me
• ISO 10360-4:2000/Cor 1:200237695,IS,Cor,ISO 10360-4:2000/Cor 1:2002,Geometrical Product Specifications (GPS) — Acceptance and reverification tests for coordinate measuring machines (CMM) — Part 4: CMMs used
• ISO 10360-5:200028094,IS,,ISO 10360-5:2000,Geometrical Product Specifications (GPS) — Acceptance and reverification tests for coordinate measuring machines (CMM) — Part 5: CMMs using multiple-sty
• ISO 10360-5:201040956,IS,,ISO 10360-5:2010,Geometrical product specifications (GPS) — Acceptance and reverification tests for coordinate measuring machines (CMM) — Part 5: CMMs using single and mu
• ISO 10360-10:201656662,IS,,ISO 10360-10:2016,Geometrical product specifications (GPS) — Acceptance and reverification tests for coordinate measuring systems (CMS) — Part 10: Laser trackers for meas
• ISO 10361:200026837,IS,,ISO 10361:2000,Textile floor coverings — Production of changes in appearance by means of Vettermann drum and hexapod tumbler testers,Revêtements de sol textiles — Product
• ISO 10361:201242360,IS,,ISO 10361:2012,Textile floor coverings — Production of changes in appearance by means of Vettermann drum and hexapod tumbler tester,Revêtements de sol textiles — Producti
• ISO 10361:201561692,IS,,ISO 10361:2015,Textile floor coverings — Production of changes in appearance by means of Vettermann drum and hexapod tumbler tester,Revêtements de sol textiles — Producti
• ISO 10362-1:199118421,IS,,ISO 10362-1:1991,Cigarettes — Determination of water in smoke condensates — Part 1: Gas-chromatographic method,Cigarettes — Dosage de l'eau dans les condensats de fumée —
• ISO 10362-1:199928322,IS,,ISO 10362-1:1999,Cigarettes — Determination of water in smoke condensates — Part 1: Gas-chromatographic method,Cigarettes — Dosage de l'eau dans les condensats de fumée —
• ISO 10362-1:1999/Amd 1:201154404,IS,Amd,ISO 10362-1:1999/Amd 1:2011,Cigarettes — Determination of water in smoke condensates — Part 1: Gas-chromatographic method — Amendment 1: .,Cigarettes — Dosage de l'eau
• ISO 10362-2:199418422,IS,,ISO 10362-2:1994,Cigarettes — Determination of water in smoke condensates — Part 2: Karl Fischer method,Cigarettes — Dosage de l'eau dans les condensats de fumée — Partie
• ISO 10362-2:1994/Amd 1:201154406,IS,Amd,ISO 10362-2:1994/Amd 1:2011,Cigarettes — Determination of water in smoke condensates — Part 2: Karl Fischer method — Amendment 1,Cigarettes — Dosage de l'eau dans les
• ISO 10364:199318424,IS,,ISO 10364:1993,Adhesives — Determination of working life (pot life) of multi-component adhesives,Adhésifs — Détermination du délai d'utilisation (vie en pot) d'adhésifs m
• ISO 10364:200739603,IS,,ISO 10364:2007,Structural adhesives — Determination of the pot life (working life) of multi-component adhesives,Adhésifs structuraux — Détermination de la durée de vie en
• ISO 10364:201560414,IS,,ISO 10364:2015,Structural adhesives — Determination of the pot life (working life) of multi-component adhesives,Adhésifs structuraux — Détermination de la vie en pot (dur
• ISO 10365:199218425,IS,,ISO 10365:1992,Adhesives — Designation of main failure patterns,Adhésifs — Désignation des principaux faciès de rupture,1992-12-17,1,['83.180'],ISO/TC 61/SC 11,9599,,[808
• ISO 10366-1:199318426,IS,,ISO 10366-1:1993,Plastics — Methyl methacrylate/acrylonitrile/butadiene/styrene (MABS) moulding and extrusion materials — Part 1: Designation system and basis for specifi
• ISO 10366-1:200233493,IS,,ISO 10366-1:2002,Plastics — Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials — Part 1: Designation system and basis for specifi
• ISO 10366-2:199418427,IS,,ISO 10366-2:1994,Plastics — Methyl methacrylate/ acrylonitrile/butadiene/styrene (MABS) moulding and extrusion materials — Part 2: Preparation of test specimens and deter
• ISO 10366-2:200333335,IS,,ISO 10366-2:2003,Plastics — Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials — Part 2: Preparation of test specimens and determ
• ISO 10368:199218429,IS,,ISO 10368:1992,Freight thermal containers — Remote condition monitoring,Conteneurs à caractéristiques thermiques — Système de pilotage à distance des groupes frigorifique
• ISO 10370:199318431,IS,,ISO 10370:1993,Petroleum products — Determination of carbon residue — Micro method,Produits pétroliers — Détermination du résidu de carbone — Méthode micro,1993-09-02,1,[
• ISO 10370:1993/Cor 1:199627881,IS,Cor,ISO 10370:1993/Cor 1:1996,Petroleum products — Determination of carbon residue — Micro method — Technical Corrigendum 1,Produits pétroliers — Détermination du résidu d
• ISO 10378:199418439,IS,,ISO 10378:1994,Copper sulfide concentrates — Determination of gold and silver contents — Fire assay gravimetric and flame atomic absorption spectrometric method,Concentré
• ISO 10378:200534528,IS,,ISO 10378:2005,"Copper, lead and zinc sulfide concentrates — Determination of gold and silver — Fire assay gravimetric and flame atomic absorption spectrometric method","
• ISO 10380:199418441,IS,,ISO 10380:1994,Corrugated flexible metallic hose and hose assemblies,Tuyaux et tuyauteries métalliques flexibles onduleux,1994-04-21,1,['23.040.70'],ISO/TC 5/SC 11,9599,,
• ISO 10380:200330176,IS,,ISO 10380:2003,Pipework — Corrugated metal hoses and hose assemblies,Tuyauteries — Tuyaux et tuyauteries métalliques flexibles onduleux,2003-01-22,2,['23.040.70'],ISO/TC
• ISO 10381-1:200232423,IS,,ISO 10381-1:2002,Soil quality — Sampling — Part 1: Guidance on the design of sampling programmes,Qualité du sol — Échantillonnage — Partie 1: Lignes directrices pour l'ét
• ISO 10381-2:200232424,IS,,ISO 10381-2:2002,Soil quality — Sampling — Part 2: Guidance on sampling techniques,Qualité du sol — Échantillonnage — Partie 2: Lignes directrices pour les techniques d'é
• ISO 10381-3:200132425,IS,,ISO 10381-3:2001,Soil quality — Sampling — Part 3: Guidance on safety,Qualité du sol — Échantillonnage — Partie 3: Lignes directrices relatives à la sécurité,2001-12-20,1
• ISO 10381-4:200332426,IS,,ISO 10381-4:2003,"Soil quality — Sampling — Part 4: Guidance on the procedure for investigation of natural, near-natural and cultivated sites","Qualité du sol — Échantill
• ISO 10381-5:200532427,IS,,ISO 10381-5:2005,Soil quality — Sampling — Part 5: Guidance on the procedure for the investigation of urban and industrial sites with regard to soil contamination,Qualité
• ISO 10381-6:199319248,IS,,ISO 10381-6:1993,"Soil quality — Sampling — Part 6: Guidance on the collection, handling and storage of soil for the assessment of aerobic microbial processes in the labo
• ISO 10381-6:200943691,IS,,ISO 10381-6:2009,"Soil quality — Sampling — Part 6: Guidance on the collection, handling and storage of soil under aerobic conditions for the assessment of microbiologica
• ISO 10381-7:200527756,IS,,ISO 10381-7:2005,Soil quality — Sampling — Part 7: Guidance on sampling of soil gas,Qualité du sol — Échantillonnage — Partie 7: Lignes directrices pour l'échantillonnage
• ISO 10381-8:200630941,IS,,ISO 10381-8:2006,Soil quality — Sampling — Part 8: Guidance on sampling of stockpiles,Qualité du sol — Échantillonnage — Partie 8: Lignes directrices pour l'échantillonna
• ISO 10382:200232422,IS,,ISO 10382:2002,Soil quality — Determination of organochlorine pesticides and polychlorinated biphenyls — Gas-chromatographic method with electron capture detection,Qualit
• ISO 10383:199218447,IS,,ISO 10383:1992,Codes for exchanges and regulated markets — Market identifier codes (MIC),Codes de bourses et marchés réglementés — Codes d'identification des marchés (MIC
• ISO 10383:200333444,IS,,ISO 10383:2003,Securities and related financial instruments — Codes for exchanges and market identification (MIC),Valeurs mobilières et autres instruments financiers con
• ISO 10384:199218448,IS,,ISO 10384:1992,Hot-rolled carbon steel sheet for machinery,Tôles laminées à chaud en acier au carbone pour outillage,1992-02-19,1,['77.140.50'],ISO/TC 17/SC 12,9599,,[280
• ISO 10384:200128049,IS,,ISO 10384:2001,Hot-rolled carbon steel sheet as defined by chemical composition,Tôles en acier au carbone laminées à chaud définies par leur composition chimique,2001-12
• ISO 10384:200845026,IS,,ISO 10384:2008,Hot-rolled carbon steel sheet as defined by chemical composition,Tôles en acier au carbone laminées à chaud définies par leur composition chimique,2008-08
• ISO 10385-1:200018449,IS,,ISO 10385-1:2000,Measurement of water flow in closed conduits — Meters for hot water — Part 1: Specifications,Mesurage de débit d'eau dans les conduites fermées — Compteu
• ISO 10390:199418454,IS,,ISO 10390:1994,Soil quality — Determination of pH,Qualité du sol — Détermination du pH,1994-07-21,1,['13.080.10'],ISO/TC 190/SC 3,9599,,[40879],"['en','fr']",5
• ISO 10390:200540879,IS,,ISO 10390:2005,Soil quality — Determination of pH,Qualité du sol — Détermination du pH,2005-02-21,2,['13.080.10'],ISO/TC 190/SC 3,9599,[18454],[75243],"['en','fr']",7
• ISO 10392:199218456,IS,,ISO 10392:1992,Road vehicles with two axles — Determination of centre of gravity,Vehicules routiers à deux essieux — Détermination du centre de gravité,1992-06-11,1,['43.
• ISO 10396:199318457,IS,,ISO 10396:1993,Stationary source emissions — Sampling for the automated determination of gas concentrations,Émissions de sources fixes — Échantillonnage pour la détermina
• ISO 10399:199118460,IS,,ISO 10399:1991,Sensory analysis — Methodology — Duo-trio test,Analyse sensorielle — Méthodologie — Essai duo-trio,1991-11-14,1,['67.240'],ISO/TC 34/SC 12,9599,,"[28638,34
• ISO 10399:200434323,IS,,ISO 10399:2004,Sensory analysis — Methodology — Duo-trio test,Analyse sensorielle — Méthodologie — Essai duo-trio,2004-06-23,2,['67.240'],ISO/TC 34/SC 12,9599,[18460],[74
• ISO 10399:201774219,IS,,ISO 10399:2017,Sensory analysis — Methodology — Duo-trio test,Analyse sensorielle — Méthodologie — Essai duo-trio,2017-12-07,3,['67.240'],ISO/TC 34/SC 12,9599,[34323],[88
• ISO 10400:199318461,IS,,ISO 10400:1993,"Petroleum and natural gas industries — Formulae and calculation for casing, tubing, drill pipe and line pipe properties","Industries du pétrole et du gaz
• ISO 10405:199318466,IS,,ISO 10405:1993,Petroleum and natural gas industries — Care and use of casing and tubing,Industries du pétrole et du gaz naturel — Entretien et utilisation des tubes de cu
• ISO 10406-1:200845977,IS,,ISO 10406-1:2008,Fibre-reinforced polymer (FRP) reinforcement of concrete — Test methods — Part 1: FRP bars and grids,Polymère renforcé par des fibres (PRF) pour l'armatu
• ISO 10406-1:201563657,IS,,ISO 10406-1:2015,Fibre-reinforced polymer (FRP) reinforcement of concrete — Test methods — Part 1: FRP bars and grids,Polymère renforcé par des fibres (PRF) pour l'armatu
• ISO 10406-2:200845978,IS,,ISO 10406-2:2008,Fibre-reinforced polymer (FRP) reinforcement of concrete — Test methods — Part 2: FRP sheets,Polymère renforcé par des fibres (PRF) pour l'armature du bé
• ISO 10406-2:201563658,IS,,ISO 10406-2:2015,Fibre-reinforced polymer (FRP) reinforcement of concrete — Test methods — Part 2: FRP sheets,Polymère renforcé par des fibres (PRF) pour l'armature du bé
• ISO 10407:199318468,IS,,ISO 10407:1993,Petroleum and natural gas industries — Drilling and production equipment — Drill stem design and operating limits,Industries du pétrole et du gaz naturel —
• ISO 10409:199318470,IS,,ISO 10409:1993,"Petroleum and natural gas industries — Application of cement lining to steel tubular goods, handling, installation and joining","Industries du pétrole et
• ISO 10414-1:200131489,IS,,ISO 10414-1:2001,Petroleum and natural gas industries — Field testing of drilling fluids — Part 1: Water-based fluids,Industries du pétrole et du gaz naturel — Essais in
• ISO 10414-2:200233019,IS,,ISO 10414-2:2002,Petroleum and natural gas industries — Field testing of drilling fluids — Part 2: Oil-based fluids,Industries du pétrole et du gaz naturel — Essais in si
• ISO 10416:200234265,IS,,ISO 10416:2002,Petroleum and natural gas industries — Drilling fluids — Laboratory testing,Industries du pétrole et du gaz naturel — Fluides de forage — Essais en labora
• ISO 10417:199318479,IS,,ISO 10417:1993,"Petroleum and natural gas industries — Subsurface safety valve systems — Design, installation, operation and repair","Industries du pétrole et du gaz natu
• ISO 10418:199318480,IS,,ISO 10418:1993,"Petroleum and natural gas industries — Offshore production platforms — Analysis, design, installation and testing of basic surface safety systems","Indust
• ISO 10418:200338067,IS,,ISO 10418:2003,"Petroleum and natural gas industries — Offshore production installations — Analysis, design, installation and testing of basic surface process safety syst
• ISO 10418:2003/Cor 1:200851283,IS,Cor,ISO 10418:2003/Cor 1:2008,"Petroleum and natural gas industries — Offshore production installations — Analysis, design, installation and testing of basic surface proce
• ISO 10419:199318481,IS,,ISO 10419:1993,"Petroleum and natural gas industries — Drilling and production equipment — Installation, maintenance and repair of surface safety valves and underwater sa
• ISO 10420:199418482,IS,,ISO 10420:1994,Petroleum and natural gas industries — Flexible pipe systems for subsea and marine riser applications,Industries du pétrole et du gaz naturel — Systèmes de
• ISO 10422:199318484,IS,,ISO 10422:1993,"Petroleum and natural gas industries — Threading, gauging, and thread inspection of casing, tubing and line pipe threads — Specification","Industries du p
• ISO 10423:199418485,IS,,ISO 10423:1994,"Petroleum and natural gas industries — Drilling and production equipment — Specification for valves, wellhead and Christmas tree equipment","Industries du
• ISO 10423:200124239,IS,,ISO 10423:2001,Petroleum and natural gas industries — Drilling and production equipment — Wellhead and christmas tree equipment,Industries du pétrole et du gaz naturel —
• ISO 10423:200339273,IS,,ISO 10423:2003,Petroleum and natural gas industries — Drilling and production equipment — Wellhead and christmas tree equipment,Industries du pétrole et du gaz naturel —
• ISO 10423:200942757,IS,,ISO 10423:2009,Petroleum and natural gas industries — Drilling and production equipment — Wellhead and christmas tree equipment,Industries du pétrole et du gaz naturel —
• ISO 10424-1:200433266,IS,,ISO 10424-1:2004,Petroleum and natural gas industries — Rotary drilling equipment — Part 1: Rotary drill stem elements,Industries du pétrole et du gaz naturel — Équipemen
• ISO 10424-2:200743612,IS,,ISO 10424-2:2007,Petroleum and natural gas industries — Rotary drilling equipment — Part 2: Threading and gauging of rotary shouldered thread connections,Industries du pé
• ISO 10425:200337526,IS,,ISO 10425:2003,Steel wire ropes for the petroleum and natural gas industries — Minimum requirements and terms of acceptance,Câbles en acier pour les industries du pétrole
• ISO 10426-1:200032820,IS,,ISO 10426-1:2000,Petroleum and natural gas industries — Cements and materials for well cementing — Part 1: Specification,Industries du pétrole et du gaz naturel — Ciments
• ISO 10426-1:2000/Amd 1:200235080,IS,Amd,ISO 10426-1:2000/Amd 1:2002,Petroleum and natural gas industries — Cements and materials for well cementing — Part 1: Specification — Amendment 1,Industries du pétrole
• ISO 10426-1:200543022,IS,,ISO 10426-1:2005,Petroleum and natural gas industries — Cements and materials for well cementing — Part 1: Specification,Industries du pétrole et du gaz naturel — Ciments
• ISO 10426-3:200335430,IS,,ISO 10426-3:2003,Petroleum and natural gas industries — Cements and materials for well cementing — Part 3: Testing of deepwater well cement formulations,Industries du pét
• ISO 10426-5:200438267,IS,,ISO 10426-5:2004,Petroleum and natural gas industries — Cements and materials for well cementing — Part 5: Determination of shrinkage and expansion of well cement formula
• ISO 10427-1:200132500,IS,,ISO 10427-1:2001,Petroleum and natural gas industries — Equipment for well cementing — Part 1: Casing bow-spring centralizers,Industries du pétrole et du gaz naturel — Éq
• ISO 10427:199318489,IS,,ISO 10427:1993,Petroleum and natural gas industries — Bow-spring casing centralizers — Specification,Industries du pétrole et du gaz naturel — Centreurs de tubes de cuvel
• ISO 10431:199318493,IS,,ISO 10431:1993,Petroleum and natural gas industries — Pumping units — Specification,Industries du pétrole et du gaz naturel — Unités de pompage — Spécifications,1993-12-2
• ISO 10432:199318494,IS,,ISO 10432:1993,Petroleum and natural gas industries — Subsurface safety valve equipment — Specification,Industries du pétrole et du gaz naturel — Vannes de protection de
• ISO 10432:199924223,IS,,ISO 10432:1999,Petroleum and natural gas industries — Downhole equipment — Subsurface safety valve equipment,Industries du pétrole et du gaz naturel — Équipement de forag
• ISO 10433:199418495,IS,,ISO 10433:1994,Petroleum and natural gas industries — Drilling and production equipment — Specification for wellhead surface safety valves and underwater safety valves fo
• ISO 10434:199818496,IS,,ISO 10434:1998,Bolted bonnet steel gate valves for petroleum and natural gas industries,Robinets-vannes en acier à chapeau boulonné pour les industries du pétrole et du g
• ISO 10434:200434436,IS,,ISO 10434:2004,"Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries","Robinets-vannes en acier à chapeau boulonné pour les industries d
• ISO 10436:199318498,IS,,ISO 10436:1993,Petroleum and natural gas industries — General-purpose steam turbines for refinery service,Industries du pétrole et du gaz naturel — Turbines à vapeur tous
• ISO 10437:199318499,IS,,ISO 10437:1993,Petroleum and natural gas industries — Special-purpose steam turbines for refinery service,Industries du pétrole et du gaz naturel — Turbines à vapeur d'us
• ISO 10438-1:200333081,IS,,ISO 10438-1:2003,"Petroleum, petrochemical and natural gas industries — Lubrication, shaft-sealing and control-oil systems and auxiliaries — Part 1: General requirements"
• ISO 10438-2:200333082,IS,,ISO 10438-2:2003,"Petroleum, petrochemical and natural gas industries — Lubrication, shaft-sealing and control-oil systems and auxiliaries — Part 2: Special-purpose oil s
• ISO 10438-3:200333085,IS,,ISO 10438-3:2003,"Petroleum, petrochemical and natural gas industries — Lubrication, shaft-sealing and control-oil systems and auxiliaries — Part 3: General-purpose oil s
• ISO 10438-4:200333086,IS,,ISO 10438-4:2003,"Petroleum, petrochemical and natural gas industries — Lubrication, shaft-sealing and control-oil systems and auxiliaries — Part 4: Self-acting gas seal
• ISO 10438-4:200740484,IS,,ISO 10438-4:2007,"Petroleum, petrochemical and natural gas industries — Lubrication, shaft-sealing and control-oil systems and auxiliaries — Part 4: Self-acting gas seal
• ISO 10439:200233743,IS,,ISO 10439:2002,"Petroleum, chemical and gas service industries — Centrifugal compressors","Industries du pétrole, de la chimie et du gaz — Compresseurs centrifuges",2002
• ISO 10440-1:200033744,IS,,ISO 10440-1:2000,Petroleum and natural gas industries — Rotary-type positive- displacement compressors — Part 1: Process compressors (oil-free),Industries du pétrole et d
• ISO 10441:199918503,IS,,ISO 10441:1999,Petroleum and natural gas industries — Flexible couplings for mechanical power transmission — Special purpose applications,Industries du pétrole et du gaz
• ISO 10447:199118509,IS,,ISO 10447:1991,"Welding — Peel and chisel testing of resistance spot, projection and seam welds","Soudage — Essais de pelage et de déboutonnage au burin appliqués aux sou
• ISO 10447:200637063,IS,,ISO 10447:2006,Resistance welding — Peel and chisel testing of resistance spot and projection welds,Soudage par résistance — Essais de déboutonnage au burin et de pelage
• ISO 10447:201561276,IS,,ISO 10447:2015,Resistance welding — Testing of welds — Peel and chisel testing of resistance spot and projection welds,Soudage par résistance — Essais des soudures — Essa
• ISO 10448:199418510,IS,,ISO 10448:1994,Agricultural tractors — Hydraulic pressure for implements,Tracteurs agricoles — Pression hydraulique pour les instruments,1994-07-21,1,['65.060.01'],ISO/TC
• ISO 10451:200230686,IS,,ISO 10451:2002,Dental implant systems — Contents of technical file,Systèmes d'implants dentaires — Contenu du dossier technique,2002-02-21,1,['11.060.15'],ISO/TC 106/SC 8
• ISO 10451:201051071,IS,,ISO 10451:2010,Dentistry — Contents of technical file for dental implant systems,Médecine bucco-dentaire — Contenu du dossier technique pour les systèmes d'implants denta
• ISO 10454:199318516,IS,,ISO 10454:1993,Truck and bus tyres — Verifying tyre capabilities — Laboratory test methods,Pneumatiques pour camions et autobus — Vérification de l'aptitude des pneumatiq
• ISO 10456:199718519,IS,,ISO 10456:1997,Thermal insulation — Building materials and products — Determination of declared and design thermal values,Isolation thermique — Matériaux et produits du b
• ISO 10456:1997/Cor 1:199729844,IS,Cor,ISO 10456:1997/Cor 1:1997,Thermal insulation — Building materials and products — Determination of declared and design thermal values — Technical Corrigendum 1,Isolatio
• ISO 10456:199931326,IS,,ISO 10456:1999,Building materials and products — Procedures for determining declared and design thermal values,Matériaux et produits du bâtiment — Procédures pour la déte
• ISO 10457:199118520,IS,,ISO 10457:1991,Textile machinery — Dyeing and finishing machines — Nominal speeds,Matériel pour l'industrie textile — Machines de teinture et d'apprêt — Vitesses nominale
• ISO 10460:199318523,IS,,ISO 10460:1993,Welded carbon steel gas cylinders — Periodic inspection and testing,Bouteilles à gaz soudées en acier au carbone — Contrôles et essais périodiques,1993-06-
• ISO 10460:200533358,IS,,ISO 10460:2005,Gas cylinders — Welded carbon-steel gas cylinders — Periodic inspection and testing,Bouteilles à gaz — Bouteilles à gaz soudées en acier au carbone — Contr
• ISO 10461:199318524,IS,,ISO 10461:1993,Seamless aluminium-alloy gas cylinders — Periodic inspection and testing,Bouteilles à gaz sans soudure en alliage d'aluminium — Contrôles et essais périodi
• ISO 10461:200533359,IS,,ISO 10461:2005,Gas cylinders — Seamless aluminium-alloy gas cylinders — Periodic inspection and testing,Bouteilles à gaz — Bouteilles à gaz sans soudure en alliage d'alum
• ISO 10461:2005/Amd 1:200644228,IS,Amd,ISO 10461:2005/Amd 1:2006,Gas cylinders — Seamless aluminium-alloy gas cylinders — Periodic inspection and testing — Amendment 1,Bouteilles à gaz — Bouteilles à gaz sa
• ISO 10462:199418525,IS,,ISO 10462:1994,Cylinders for dissolved acetylene — Periodic inspection and maintenance,Bouteilles à acétylène dissous — Contrôles et essais périodiques,1994-12-22,1,['23.
• ISO 10462:200533360,IS,,ISO 10462:2005,Gas cylinders — Transportable cylinders for dissolved acetylene — Periodic inspection and maintenance,Bouteilles à gaz — Bouteilles transportables pour acé
• ISO 10463:199318526,IS,,ISO 10463:1993,Cylinders for permanent gases — Inspection at time of filling,Bouteilles pour gaz permanents — Contrôle au moment du remplissage,1993-06-10,1,['23.020.35']
• ISO 10466:199718529,IS,,ISO 10466:1997,Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes — Test method to prove the resistance to initial ring deflection,Systèmes de
• ISO 10467:200433530,IS,,ISO 10467:2004,Plastics piping systems for pressure and non-pressure drainage and sewerage — Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated po
• ISO 10467:2004/Amd 1:201252273,IS,Amd,ISO 10467:2004/Amd 1:2012,Plastics piping systems for pressure and non-pressure drainage and sewerage — Glass-reinforced thermosetting plastics (GRP) systems based on
• ISO 10467:201870198,IS,,ISO 10467:2018,Plastics piping systems for pressure and non-pressure drainage and sewerage — Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated po
• ISO 10468:200332230,IS,,ISO 10468:2003,Glass-reinforced thermosetting plastics (GRP) pipes — Determination of the long-term specific ring creep stiffness under wet conditions and calculation of
• ISO 10468:2003/Amd 1:201055953,IS,Amd,ISO 10468:2003/Amd 1:2010,Glass-reinforced thermosetting plastics (GRP) pipes — Determination of the long-term specific ring creep stiffness under wet conditions and c
• ISO 10468:201871166,IS,,ISO 10468:2018,Glass-reinforced thermosetting plastics (GRP) pipes — Determination of the ring creep properties under wet or dry conditions,Tubes en plastiques thermodurc
• ISO 10469:199418532,IS,,ISO 10469:1994,Copper sulfide concentrates — Determination of copper content — Electrogravimetric method,Concentrés de sulfure de cuivre — Dosage du cuivre — Méthode élec
• ISO 10470:199318533,IS,,ISO 10470:1993,Green coffee — Defect reference chart,Café vert — Table de référence des défauts,1993-06-10,1,['67.140.20'],ISO/TC 34/SC 15,9599,,"[30992,40401]","['en','f
• ISO 10471:200332234,IS,,ISO 10471:2003,Glass-reinforced thermosetting plastics (GRP) pipes — Determination of the long-term ultimate bending strain and the long-term ultimate relative ring defle
• ISO 10471:2003/Amd 1:201056652,IS,Amd,ISO 10471:2003/Amd 1:2010,Glass-reinforced thermosetting plastics (GRP) pipes — Determination of the long-term ultimate bending strain and the long-term ultimate relat
• ISO 10471:201870029,IS,,ISO 10471:2018,Glass-reinforced thermosetting plastics (GRP) pipes — Determination of the long-term ultimate bending strain and the long-term ultimate relative ring defle
• ISO 10474:199118541,IS,,ISO 10474:1991,Steel and steel products — Inspection documents,Aciers et produits sidérurgiques — Documents de contrôle,1991-12-05,1,['77.140.01'],ISO/TC 17/SC 20,9599,,[
• ISO 10475:199218542,IS,,ISO 10475:1992,Valves for tubeless tyres and valves for tubes — Identification system for valves and their components,Valves pour pneumatiques sans chambre et valves pour
• ISO 10477:199218544,IS,,ISO 10477:1992,Dentistry — Polymer-based crown and bridge materials,Art dentaire — Produits à base de polymère pour couronnes et ponts,1992-12-03,1,['11.060.10'],ISO/TC 1
• ISO 10477:1992/Amd 1:199822725,IS,Amd,ISO 10477:1992/Amd 1:1998,Dentistry — Polymer-based crown and bridge materials — Amendment 1,Art dentaire — Produits à base de polymère pour couronnes et ponts — Amend
• ISO 10477:200433709,IS,,ISO 10477:2004,Dentistry — Polymer-based crown and bridge materials,Art dentaire — Produits à base de polymères pour couronnes et ponts,2004-09-22,2,['11.060.10'],ISO/TC
• ISO 10477:201868235,IS,,ISO 10477:2018,Dentistry — Polymer-based crown and veneering materials,Médecine bucco-dentaire — Produits à base de polymères pour couronnes et facettes,2018-06-08,3,['11
• ISO 10477:202080007,IS,,ISO 10477:2020,Dentistry — Polymer-based crown and veneering materials,Médecine bucco-dentaire — Produits à base de polymères pour couronnes et facettes,2020-10-26,4,['11
• ISO 10483-1:199318551,IS,,ISO 10483-1:1993,Road vehicles — Intelligent power switches — Part 1: High-side intelligent power switch,Véhicules routiers — Sectionneurs de puissance intelligents — Par
• ISO 10484:199718553,IS,,ISO 10484:1997,Widening test on nuts,Essai d'évasement des écrous,1997-10-23,1,['21.060.20'],ISO/TC 2/SC 12,9599,,"[73208,66016]","['en','fr']",3
• ISO 10485:199118554,IS,,ISO 10485:1991,Cone proof load test on nuts,Essai de charge d'épreuve au cône des écrous,1991-11-28,1,['21.060.20'],ISO/TC 2/SC 12,9599,,[63204],"['en','fr']",2
• ISO 10494:199318563,IS,,ISO 10494:1993,Gas turbines and gas turbine sets — Measurement of emitted airborne noise — Engineering/survey method,Turbines à gaz et groupes de turbines à gaz — Mesurag
• ISO 10497:199218566,IS,,ISO 10497:1992,Testing of valves — Fire type-testing requirements,Essais des appareils de robinetterie — Caractéristiques de l'essai au feu,1992-10-08,1,['23.060.01'],ISO
• ISO 10497:200433203,IS,,ISO 10497:2004,Testing of valves — Fire type-testing requirements,Essais des appareils de robinetterie — Exigences de l'essai au feu,2004-08-16,2,['23.060.01'],ISO/TC 153
• ISO 10497:201045603,IS,,ISO 10497:2010,Testing of valves — Fire type-testing requirements,Essais des appareils de robinetterie — Exigences de l'essai au feu,2010-02-12,3,['23.060.01'],ISO/TC 153
• ISO 10499-1:199118568,IS,,ISO 10499-1:1991,"Industrial tyres and rims — Rubber solid tyres (metric series) for pneumatic tyre rims — Part 1: Designation, dimensions and marking","Pneumatiques et j
• ISO 10499-1:1991/Cor 1:199729922,IS,Cor,ISO 10499-1:1991/Cor 1:1997,"Industrial tyres and rims — Rubber solid tyres (metric series) for pneumatic tyre rims — Part 1: Designation, dimensions and marking — Tec
• ISO 10502:199218571,IS,,ISO 10502:1992,Aerospace — Hose assemblies in polytetrafluoroethylene (PTFE) for use up to 232 degrees C and 10 500 kPa — Procurement specification,"Aéronautique et espac
• ISO 10504:199818573,IS,,ISO 10504:1998,"Starch derivatives — Determination of the composition of glucose syrups, fructose syrups and hydrogenated glucose syrups — Method using high-performance l
• ISO 10508:199518577,IS,,ISO 10508:1995,Thermoplastics pipes and fittings for hot and cold water systems,Tubes et raccords en matières thermoplastiques destinés aux systèmes d'eaux chaude et froi
• ISO 10509:199218578,IS,,ISO 10509:1992,Hexagon flange head tapping screws,Vis à tôle à tête hexagonale à embase cylindro-tronconique,1992-04-23,1,['21.060.10'],ISO/TC 2/SC 13,9599,,[57085],"['en
• ISO 10510:199918579,IS,,ISO 10510:1999,Tapping screw and washer assemblies with plain washers,Vis à tôle à rondelle plate incorporée,1999-11-04,1,['21.060.10'],ISO/TC 2/SC 13,9599,,[56609],"['en
• ISO 10511:199718580,IS,,ISO 10511:1997,Prevailing torque type hexagon thin nuts (with non-metallic insert),Écrous hexagonaux bas autofreinés (à anneau non métallique),1997-11-06,1,['21.060.20'],
• ISO 10511:201261369,IS,,ISO 10511:2012,Prevailing torque type hexagon thin nuts (with non-metallic insert),Écrous hexagonaux bas autofreinés (à anneau non métallique),2012-12-14,2,['21.060.20'],
• ISO 10512:199718581,IS,,ISO 10512:1997,"Prevailing torque type hexagon nuts (with non-metallic insert), style 1, with metric fine pitch thread — Property classes 6, 8 and 10","Écrous hexagonaux
• ISO 10512:201261370,IS,,ISO 10512:2012,"Prevailing torque type hexagon regular nuts (with non-metallic insert) with metric fine pitch thread — Property classes 6, 8 and 10","Écrous hexagonaux no
• ISO 10513:199718582,IS,,ISO 10513:1997,"Prevailing torque type all-metal hexagon nuts, style 2, with metric fine pitch thread — Property classes 8, 10 and 12","Écrous hexagonaux autofreinés tout
• ISO 10513:201261371,IS,,ISO 10513:2012,"Prevailing torque type all-metal hexagon high nuts with metric fine pitch thread — Property classes 8, 10 and 12","Écrous hexagonaux hauts autofreinés tou
• ISO 10517:199318585,IS,,ISO 10517:1993,"Portable powered hedge trimmers — Definitions, mechanical safety requirements and tests","Taille-haie portatifs à moteur — Définitions, prescriptions de s
• ISO 10517:200937290,IS,,ISO 10517:2009,Powered hand-held hedge trimmers — Safety,Taille-haies portatifs à moteur — Sécurité,2009-07-17,2,['65.060.70'],ISO/TC 23/SC 13,9599,[18585],[68674],"['en'
• ISO 10517:2009/Amd 1:201359779,IS,Amd,ISO 10517:2009/Amd 1:2013,Powered hand-held hedge trimmers — Safety — Amendment 1,Taille-haies portatifs à moteur — Sécurité — Amendement 1,2013-08-13,2,['65.060.70'],
• ISO 10518:199118586,IS,,ISO 10518:1991,Powered walk-behind and hand-held lawn trimmers and lawn edge trimmers — Mechanical safety requirements and test methods,Coupe-bordures de gazon et coupe-g
• ISO 10519:199218588,IS,,ISO 10519:1992,Rapeseed — Determination of chlorophyll content — Spectrometric method,Graines de colza — Détermination de la teneur en chlorophylle — Méthode spectrométri
• ISO 10519:199722763,IS,,ISO 10519:1997,Rapeseed — Determination of chlorophyll content — Spectrometric method,Graines de colza — Détermination de la teneur en chlorophylle — Méthode spectrométri
• ISO 10521:199218590,IS,,ISO 10521:1992,Motor vehicle road load — Determination under reference atmospheric conditions and reproduction on chassis dynamometer,Résistance sur route des véhicules à
• ISO 10522:199318591,IS,,ISO 10522:1993,Agricultural irrigation equipment — Direct-acting pressure-regulating valves,Matériel agricole d'irrigation — Vannes de régulation de la pression à action
• ISO 10523:199418592,IS,,ISO 10523:1994,Water quality — Determination of pH,Qualité de l'eau — Détermination du pH,1994-07-28,1,['13.060.50'],ISO/TC 147/SC 2,9599,,[51994],"['en','fr']",10
• ISO 10524-1:200638491,IS,,ISO 10524-1:2006,Pressure regulators for use with medical gases — Part 1: Pressure regulators and pressure regulators with flow-metering devices,Détendeurs pour l'utilisa
• ISO 10524-2:200535371,IS,,ISO 10524-2:2005,Pressure regulators for use with medical gases — Part 2: Manifold and line pressure regulators,Détendeurs pour l'utilisation avec les gaz médicaux — Part
• ISO 10524-3:200535372,IS,,ISO 10524-3:2005,Pressure regulators for use with medical gases — Part 3: Pressure regulators integrated with cylinder valves,Détendeurs pour l'utilisation avec les gaz m
• ISO 10524-3:2005/Amd 1:201344249,IS,Amd,ISO 10524-3:2005/Amd 1:2013,Pressure regulators for use with medical gases — Part 3: Pressure regulators integrated with cylinder valves — Amendment 1: Filtration and
• ISO 10524:199518593,IS,,ISO 10524:1995,Pressure regulators and pressure regulators with flow-metering devices for medical gas systems,Régulateurs de pression avec ou sans débitmètre pour système
• ISO 10524:1995/Cor 1:199627187,IS,Cor,ISO 10524:1995/Cor 1:1996,Pressure regulators and pressure regulators with flow-metering devices for medical gas systems — Technical Corrigendum 1,Régulateurs de press
• ISO 10525:199718594,IS,,ISO 10525:1997,Counterbalanced trucks handling freight containers of 6 m (20 ft) length and above — Additional stability tests,Chariots élévateurs travaillant en porte-à-
• ISO 10526:200741640,IS,,ISO 10526:2007,CIE standard illuminants for colorimetry,Illuminants colorimétriques normalisés CIE,2007-10-15,1,['17.180.20'],CIE,9599,[30604],[52496],"['en','fr']",14
• ISO 10526:2007/Cor 1:200852474,IS,Cor,ISO 10526:2007/Cor 1:2008,CIE standard illuminants for colorimetry — Technical Corrigendum 1,Illuminants colorimétriques normalisés CIE — Rectificatif technique 1,2008
• ISO 10527:200737408,IS,,ISO 10527:2007,CIE standard colorimetric observers,Observateurs de référence colorimétriques CIE,2007-10-15,1,['17.180.20'],CIE,9599,[18596],[52495],"['en','fr']",30
• ISO 10527:2007/Cor 1:200852494,IS,Cor,ISO 10527:2007/Cor 1:2008,CIE standard colorimetric observers — Technical Corrigendum 1,Observateurs de référence colorimétriques CIE — Rectificatif technique 1,2008-1
• ISO 10534-2:199822851,IS,,ISO 10534-2:1998,Acoustics — Determination of sound absorption coefficient and impedance in impedance tubes — Part 2: Transfer-function method,Acoustique — Détermination
• ISO 10535:199818604,IS,,ISO 10535:1998,Hoists for the transfer of disabled persons — Requirements and test methods,Lève-personnes pour transférer des personnes handicapées — Exigences et méthode
• ISO 10535:200632155,IS,,ISO 10535:2006,Hoists for the transfer of disabled persons — Requirements and test methods,Lève-personnes pour transférer des personnes handicapées — Exigences et méthode
• ISO 10537:201045990,IS,,ISO 10537:2010,Space data and information transfer systems — Encapsulation service,Systèmes de transfert des informations et données spatiales — Service d'encapsulation,2
• ISO 10537:2010/Amd 1:201568743,IS,Amd,ISO 10537:2010/Amd 1:2015,Space data and information transfer systems — Encapsulation service — Amendment 1,Systèmes de transfert des informations et données spatiales
• ISO 10542-1:200130077,IS,,ISO 10542-1:2001,Technical systems and aids for disabled or handicapped persons — Wheelchair tiedown and occupant-restraint systems — Part 1: Requirements and test method
• ISO 10542-2:200121409,IS,,ISO 10542-2:2001,Technical systems and aids for disabled or handicapped persons — Wheelchair tiedown and occupant-restraint systems — Part 2: Four-point strap-type tiedow
• ISO 10542-3:200530495,IS,,ISO 10542-3:2005,Technical systems and aids for disabled or handicapped persons — Wheelchair tiedown and occupant-restraint systems — Part 3: Docking-type tiedown systems
• ISO 10542-4:200430496,IS,,ISO 10542-4:2004,Technical systems and aids for disabled or handicapped persons — Wheelchair tiedown and occupant-restraint systems — Part 4: Clamp-type tiedown systems,A
• ISO 10542-5:200430497,IS,,ISO 10542-5:2004,Technical systems and aids for disabled or handicapped persons — Wheelchair tiedown and occupant-restraint systems — Part 5: Systems for specific wheelch
• ISO 10543:199318613,IS,,ISO 10543:1993,Seamless and hot-stretch-reduced welded steel tubes for pressure purposes — Full peripheral ultrasonic thickness testing,Tubes en acier sans soudure et sou
• ISO 10544:199218614,IS,,ISO 10544:1992,Cold-reduced steel wire for the reinforcement of concrete and the manufacture of welded fabric,Fils en acier à béton transformés à froid pour armatures pas
• ISO 10545-1:199518615,IS,,ISO 10545-1:1995,Ceramic tiles — Part 1: Sampling and basis for acceptance,Carreaux et dalles céramiques — Partie 1: Échantillonnage et conditions de réception,1995-11-16
• ISO 10545-2:199518616,IS,,ISO 10545-2:1995,Ceramic tiles — Part 2: Determination of dimensions and surface quality,Carreaux et dalles céramiques — Partie 2: Détermination des caractéristiques dime
• ISO 10545-2:1995/Cor 1:199727486,IS,Cor,ISO 10545-2:1995/Cor 1:1997,Ceramic tiles — Part 2: Determination of dimensions and surface quality — Technical Corrigendum 1,Carreaux et dalles céramiques — Partie 2:
• ISO 10545-3:199518617,IS,,ISO 10545-3:1995,"Ceramic tiles — Part 3: Determination of water absorption, apparent porosity, apparent relative density and bulk density","Carreaux et dalles céramiques
• ISO 10545-3:1995/Cor 1:199727487,IS,Cor,ISO 10545-3:1995/Cor 1:1997,"Ceramic tiles — Part 3: Determination of water absorption, apparent porosity, apparent relative density and bulk density — Technical Corri
• ISO 10545-4:199418618,IS,,ISO 10545-4:1994,Ceramic tiles — Part 4: Determination of modulus of rupture and breaking strength,Carreaux et dalles céramiques — Partie 4: Détermination de la résistanc
• ISO 10545-4:200440694,IS,,ISO 10545-4:2004,Ceramic tiles — Part 4: Determination of modulus of rupture and breaking strength,Carreaux et dalles céramiques — Partie 4: Détermination de la résistanc
• ISO 10545-4:201460976,IS,,ISO 10545-4:2014,Ceramic tiles — Part 4: Determination of modulus of rupture and breaking strength,Carreaux et dalles céramiques — Partie 4: Détermination de la résistanc
• ISO 10545-6:199518620,IS,,ISO 10545-6:1995,Ceramic tiles — Part 6: Determination of resistance to deep abrasion for unglazed tiles,Carreaux et dalles céramiques — Partie 6: Détermination de la rés
• ISO 10545-8:19941813,IS,,ISO 10545-8:1994,Ceramic tiles — Part 8: Determination of linear thermal expansion,Carreaux et dalles céramiques — Partie 8: Détermination de la dilatation linéique d'orig
• ISO 10545-9:199418622,IS,,ISO 10545-9:1994,Ceramic tiles — Part 9: Determination of resistance to thermal shock,Carreaux et dalles céramiques — Partie 9: Détermination de la résistance aux chocs t
• ISO 10545-9:200440695,IS,,ISO 10545-9:2004,Ceramic tiles — Part 9: Determination of resistance to thermal shock,Carreaux et dalles céramiques — Partie 9: Détermination de la résistance aux chocs t
• ISO 10545-10:199518623,IS,,ISO 10545-10:1995,Ceramic tiles — Part 10: Determination of moisture expansion,Carreaux et dalles céramiques — Partie 10: Détermination de la dilatation à l'humidité,1995
• ISO 10545-13:199518629,IS,,ISO 10545-13:1995,Ceramic tiles — Part 13: Determination of chemical resistance,Carreaux et dalles céramiques — Partie 13: Détermination de la résistance chimique,1995-10
• ISO 10545-14:199518630,IS,,ISO 10545-14:1995,Ceramic tiles — Part 14: Determination of resistance to stains,Carreaux et dalles céramiques — Partie 14: Détermination de la résistance aux taches,1995
• ISO 10545-14:1995/Cor 1:199727489,IS,Cor,ISO 10545-14:1995/Cor 1:1997,Ceramic tiles — Part 14: Determination of resistance to stains — Technical Corrigendum 1,Carreaux et dalles céramiques — Partie 14: Déterm
• ISO 10545-15:199518626,IS,,ISO 10545-15:1995,Ceramic tiles — Part 15: Determination of lead and cadmium given off by glazed tiles,Carreaux et dalles céramiques — Partie 15: Détermination de la tene
• ISO 10545-16:199918627,IS,,ISO 10545-16:1999,Ceramic tiles — Part 16: Determination of small colour differences,Carreaux et dalles céramiques — Partie 16: Détermination de faibles différences de co
• ISO 10548:199418633,IS,,ISO 10548:1994,Carbon fibre — Determination of size content,Fibres de carbone — Détermination du taux d'ensimage,1994-11-03,1,['59.100.20'],ISO/TC 61/SC 13,9599,,[33312],
• ISO 10551:199518636,IS,,ISO 10551:1995,Ergonomics of the thermal environment — Assessment of the influence of the thermal environment using subjective judgement scales,Ergonomie des ambiances th
• ISO 10552:199918637,IS,,ISO 10552:1999,Timekeeping instruments — Crowns and sealed tubes — Designs and dimensions,Instruments horaires — Couronnes et tubes étanches — Constructions et dimensions
• ISO 10552:201260289,IS,,ISO 10552:2012,Timekeeping instruments — Crowns and sealed tubes — Designs and dimensions,Instruments horaires — Couronnes et tubes étanches — Constructions et dimensions
• ISO 10553:200335356,IS,,ISO 10553:2003,Horology — Procedure for evaluating the accuracy of quartz watches,Horlogerie — Procédure d'évaluation de la précision des montres à quartz,2003-03-18,1,['
• ISO 10555-1:199518640,IS,,ISO 10555-1:1995,"Sterile, single-use intravascular catheters — Part 1: General requirements","Cathéters intravasculaires stériles, non réutilisables — Partie 1: Prescrip
• ISO 10555-1:1995/Amd 1:199929526,IS,Amd,ISO 10555-1:1995/Amd 1:1999,"Sterile, single-use intravascular catheters — Part 1: General requirements — Amendment 1","Cathéters intravasculaires stériles, non réutil
• ISO 10555-1:1995/Amd 2:200433786,IS,Amd,ISO 10555-1:1995/Amd 2:2004,"Sterile, single-use intravascular catheters — Part 1: General requirements — Amendment 2","Cathéters intravasculaires stériles, non réutil
• ISO 10555-1:201354884,IS,,ISO 10555-1:2013,Intravascular catheters — Sterile and single-use catheters — Part 1: General requirements,Cathéters intravasculaires — Cathéters stériles et non réutilis
• ISO 10555-1:2013/Amd 1:201770319,IS,Amd,ISO 10555-1:2013/Amd 1:2017,Intravascular catheters — Sterile and single-use catheters — Part 1: General requirements — Amendment 1,Cathéters intravasculaires — Cathét
• ISO 10555-2:199619053,IS,,ISO 10555-2:1996,"Sterile, single-use intravascular catheters — Part 2: Angiographic catheters","Cathéters intravasculaires stériles, non réutilisables — Partie 2: Cathét
• ISO 10555-2:1996/Cor 1:200237142,IS,Cor,ISO 10555-2:1996/Cor 1:2002,"Sterile, single-use intravascular catheters — Part 2: Angiographic catheters — Technical Corrigendum 1","Cathéters intravasculaires stéril
• ISO 10555-3:199619054,IS,,ISO 10555-3:1996,"Sterile, single-use intravascular catheters — Part 3: Central venous catheters","Cathéters intravasculaires stériles, non réutilisables — Partie 3: Cath
• ISO 10555-3:1996/Cor 1:200237143,IS,Cor,ISO 10555-3:1996/Cor 1:2002,"Sterile, single-use intravascular catheters — Part 3: Central venous catheters — Technical Corrigendum 1","Cathéters intravasculaires stér
• ISO 10555-4:199619056,IS,,ISO 10555-4:1996,"Sterile, single-use intravascular catheters — Part 4: Balloon dilatation catheters","Cathéters intravasculaires stériles, non réutilisables — Partie 4:
• ISO 10555-4:1996/Cor 1:200237144,IS,Cor,ISO 10555-4:1996/Cor 1:2002,"Sterile, single-use intravascular catheters — Part 4: Balloon dilatation catheters — Technical Corrigendum 1","Cathéters intravasculaires
• ISO 10555-4:201357383,IS,,ISO 10555-4:2013,Intravascular catheters — Sterile and single-use catheters — Part 4: Balloon dilatation catheters,Cathéters intravasculaires — Cathéters stériles et non
• ISO 10555-5:199623063,IS,,ISO 10555-5:1996,"Sterile, single-use intravascular catheters — Part 5: Over-needle peripheral catheters","Cathéters intravasculaires stériles, non réutilisables — Partie
• ISO 10555-5:1996/Amd 1:199929092,IS,Amd,ISO 10555-5:1996/Amd 1:1999,"Sterile, single-use intravascular catheters — Part 5: Over-needle peripheral catheters — Amendment 1","Cathéters intravasculaires stériles
• ISO 10555-5:1996/Cor 1:200237145,IS,Cor,ISO 10555-5:1996/Cor 1:2002,"Sterile, single-use intravascular catheters — Part 5: Over-needle peripheral catheters — Technical Corrigendum 1","Cathéters intravasculai
• ISO 10563:199118648,IS,,ISO 10563:1991,Building construction — Sealants for joints — Determination of change in mass and volume,Construction immobilière — Mastics pour joints — Détermination des
• ISO 10563:200535009,IS,,ISO 10563:2005,Building construction — Sealants — Determination of change in mass and volume,Construction immobilière — Mastics — Détermination des variations de masse et
• ISO 10563:201768416,IS,,ISO 10563:2017,Buildings and civil engineering works — Sealants — Determination of change in mass and volume,Bâtiments et ouvrages de génie civil — Mastics — Déterminatio
• ISO 10565:199318650,IS,,ISO 10565:1993,Oilseeds — Simultaneous determination of oil and moisture contents — Method using pulsed nuclear magnetic resonance spectrometry,Graines oléagineuses — Dét
• ISO 10565:199826317,IS,,ISO 10565:1998,Oilseeds — Simultaneous determination of oil and water contents — Method using pulsed nuclear magnetic resonance spectrometry,Graines oléagineuses — Déterm
• ISO 10567:199218652,IS,,ISO 10567:1992,Earth-moving machinery — Hydraulic excavators — Lift capacity,Engins de terrassement — Pelles hydrauliques — Capacité de levage,1992-07-29,1,['53.100'],ISO
• ISO 10570:199218655,IS,,ISO 10570:1992,Earth-moving machinery — Articulated frame lock — Performance requirements,Engins de terrassement — Dispositif de verrouillage pour direction par châssis a
• ISO 10571:199523721,IS,,ISO 10571:1995,Tyres for mobile cranes and similar specialized machines,Pneumatiques pour grues mobiles et engins spéciaux similaires,1995-09-28,1,['83.160.99'],ISO/TC 31
• ISO 10571:201146124,IS,,ISO 10571:2011,Tyres for mobile cranes and similar specialized machines,Pneumatiques pour grues mobiles et engins spéciaux similaires,2011-06-29,2,"['53.020.20','83.160.9
• ISO 10571:201665217,IS,,ISO 10571:2016,Tyres for mobile cranes and similar specialized machines,Pneumatiques pour grues mobiles et engins spéciaux similaires,2016-04-04,3,"['53.020.20','83.160.9
• ISO 10574:199318659,IS,,ISO 10574:1993,Refrigerated light-hydrocarbon fluids — Measurement of liquid levels in tanks containing liquefied gases — Float-type level gauges,Hydrocarbures légers réf
• ISO 10576-1:200332373,IS,,ISO 10576-1:2003,Statistical methods — Guidelines for the evaluation of conformity with specified requirements — Part 1: General principles,Méthodes statistiques — Lignes
• ISO 10578:199218662,IS,,ISO 10578:1992,Technical drawings — Tolerancing of orientation and location — Projected tolerance zone,Dessins techniques — Tolérancement d'orientation et de position — Z
• ISO 10579:199318663,IS,,ISO 10579:1993,Technical drawings — Dimensioning and tolerancing — Non-rigid parts,Dessins techniques — Cotation et tolérancement — Pièces non rigides,1993-01-28,1,['01.1
• ISO 10581:201146013,IS,,ISO 10581:2011,Resilient floor coverings — Homogeneous poly(vinyl chloride) floor covering — Specifications,Revêtements de sol résilients — Revêtements de sol homogènes e
• ISO 10582:201046014,IS,,ISO 10582:2010,Resilient floor coverings — Heterogeneous poly(vinyl chloride) floor coverings — Specification,Revêtements de sol résilients — Revêtements de sol hétérogèn
• ISO 10583:199318667,IS,,ISO 10583:1993,Aerospace fluid systems — Test methods for tube/fitting assemblies,Circuits de fluides pour l'aérospatiale — Méthodes d'essai des assemblages tube/raccorde
• ISO 10590:199118674,IS,,ISO 10590:1991,Building construction — Sealants — Determination of adhesion/cohesion properties at maintained extension after immersion in water,Construction immobililère
• ISO 10591:199118675,IS,,ISO 10591:1991,Building construction — Sealants — Determination of adhesion/cohesion properties after immersion in water,Construction immobilière — Mastics — Déterminatio
• ISO 10591:200535011,IS,,ISO 10591:2005,Building construction — Sealants — Determination of adhesion/cohesion properties of sealants after immersion in water,Construction immobilière — Produits p
• ISO 10592:199418676,IS,,ISO 10592:1994,Small craft — Hydraulic steering systems,Navires de plaisance — Appareils à gouverner hydrauliques,1994-09-29,1,['47.080'],ISO/TC 188,9599,,[75811],['en'],
• ISO 10594:199718678,IS,,ISO 10594:1997,Micrographics — Rotary camera systems — Test target for checking performance,Micrographie — Systèmes de caméras cinétiques — Cible de contrôle pour vérifie
• ISO 10597:199818679,IS,,ISO 10597:1998,Commercial road vehicles — Flat attachment fixing nuts — Test methods,Véhicules utilitaires — Écrous de fixation des roues à attache plate — Méthodes d'ess
• ISO 10597:200438883,IS,,ISO 10597:2004,Road vehicles — Flat attachment fixing nuts for commercial vehicles — Test methods,Véhicules routiers — Écrous de fixation des roues à attache plate pour v
• ISO 10601:199318684,IS,,ISO 10601:1993,Micaceous iron oxide pigments for paints — Specifications and test methods,Pigments d'oxyde de fer micacé pour peintures — Spécifications et méthodes d'ess
• ISO 10602:199318685,IS,,ISO 10602:1993,Photography — Processed silver-gelatin type black-and-white film — Specifications for stability,Photographie — Film de type gélatino-argentique noir et bla
• ISO 10602:199523092,IS,,ISO 10602:1995,Photography — Processed silver-gelatin type black-and-white film — Specifications for stability,Photographie — Film de type gélatino-argentique noir et bla
• ISO 10604:199318687,IS,,ISO 10604:1993,Road vehicles — Measurement equipment for orientation of headlamp luminous beams,Véhicules routiers — Équipement de mesure de l'orientation des faisceaux l
• ISO 10605:200124562,IS,,ISO 10605:2001,Road vehicles — Test methods for electrical disturbances from electrostatic discharge,Véhicules routiers — Méthodes d'essai des perturbations électriques p
• ISO 10605:200841937,IS,,ISO 10605:2008,Road vehicles — Test methods for electrical disturbances from electrostatic discharge,Véhicules routiers — Méthodes d'essai des perturbations électriques p
• ISO 10605:2008/Amd 1:201461135,IS,Amd,ISO 10605:2008/Amd 1:2014,Road vehicles — Test methods for electrical disturbances from electrostatic discharge — Amendment 1,Véhicules routiers — Méthodes d'essai des
• ISO 10605:2008/Cor 1:201055917,IS,Cor,ISO 10605:2008/Cor 1:2010,Road vehicles — Test methods for electrical disturbances from electrostatic discharge — Technical Corrigendum 1,Véhicules routiers — Méthodes
• ISO 10606:199518689,IS,,ISO 10606:1995,Steel for the reinforcement of concrete — Determination of percentage total elongation at maximum force,Acier à béton pour armatures passives — Déterminati
• ISO 10618:199918711,IS,,ISO 10618:1999,Carbon fibre — Determination of tensile properties of resin-impregnated yarn,Fibres de carbone — Détermination des propriétés en traction sur fils imprégné
• ISO 10619-1:201145965,IS,,ISO 10619-1:2011,Rubber and plastics hoses and tubing — Measurement of flexibility and stiffness — Part 1: Bending tests at ambient temperature,Tuyaux et tubes en caoutch
• ISO 10619-2:201145942,IS,,ISO 10619-2:2011,Rubber and plastics hoses and tubing — Measurement of flexibility and stiffness — Part 2: Bending tests at sub-ambient temperatures,Tuyaux et tubes en ca
• ISO 10619-2:201772846,IS,,ISO 10619-2:2017,Rubber and plastics hoses and tubing — Measurement of flexibility and stiffness — Part 2: Bending tests at sub-ambient temperatures,Tuyaux et tubes en ca
• ISO 10625:199618717,IS,,ISO 10625:1996,Equipment for crop protection — Sprayer nozzles — Colour coding for identification,Matériel de protection des cultures — Buses de pulvérisation à jet pince
• ISO 10625:1996/Cor 1:199830357,IS,Cor,ISO 10625:1996/Cor 1:1998,Equipment for crop protection — Sprayer nozzles — Colour coding for identification — Technical Corrigendum 1,Matériel de protection des cultu
• ISO 10625:200537186,IS,,ISO 10625:2005,Equipment for crop protection — Sprayer nozzles — Colour coding for identification,Matériel de protection des cultures — Buses de pulvérisation — Code de c
• ISO 10628:199718721,IS,,ISO 10628:1997,Flow diagrams for process plants — General rules,Schémas de procédé pour les unités de fabrication/de production — Règles générales,1997-04-10,1,['01.080.3
• ISO 10631:199418724,IS,,ISO 10631:1994,Metallic butterfly valves for general purposes,Robinets métalliques à papillon d'usage général,1994-04-21,1,['23.060.99'],ISO/TC 153,9599,,[55648],"['en','
• ISO 10631:201355648,IS,,ISO 10631:2013,Metallic butterfly valves for general purposes,Robinets métalliques à papillon d'usage général,2013-08-26,2,['23.060.99'],ISO/TC 153,9599,[18724],[78331],"
• ISO 10634:199518728,IS,,ISO 10634:1995,Water quality — Guidance for the preparation and treatment of poorly water-soluble organic compounds for the subsequent evaluation of their biodegradabilit
• ISO 10637:199918731,IS,,ISO 10637:1999,Dental equipment — High- and medium-volume suction systems,Matériel dentaire — Systèmes d'aspiration à haut et moyen volume,1999-08-26,1,['11.060.20'],ISO/
• ISO 10638:201046023,IS,,ISO 10638:2010,Rubber — Identification of antidegradants by gas chromatography/mass spectrometry,Caoutchouc — Identification des antidégradants par chromatographie en pha
• ISO 10639:200433531,IS,,ISO 10639:2004,Plastics piping systems for pressure and non-pressure water supply — Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (
• ISO 10639:2004/Amd 1:201152272,IS,Amd,ISO 10639:2004/Amd 1:2011,Plastics piping systems for pressure and non-pressure water supply — Glass-reinforced thermosetting plastics (GRP) systems based on unsaturat
• ISO 10639:201765187,IS,,ISO 10639:2017,Plastics piping systems for pressure and non-pressure water supply — Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (
• ISO 10642:199718737,IS,,ISO 10642:1997,Hexagon socket countersunk head screws,Vis à tête fraisée à six pans creux,1997-11-06,1,['21.060.10'],ISO/TC 2,9599,,[34454],"['en','fr']",9
• ISO 10642:200434454,IS,,ISO 10642:2004,Hexagon socket countersunk head screws,Vis à tête fraisée à six pans creux,2004-02-27,2,['21.060.10'],ISO/TC 2/SC 11,9599,[18737],"[66029,72578]","['en','f
• ISO 10642:2004/Amd 1:201261325,IS,Amd,ISO 10642:2004/Amd 1:2012,Hexagon socket countersunk head screws — Amendment 1,Vis à tête fraisée à six pans creux — Amendement 1,2012-06-27,2,['21.060.10'],ISO/TC 2/S
• ISO 10642:201972578,IS,,ISO 10642:2019,Fasteners — Hexagon socket countersunk head screws with reduced loadability,Fixations — Vis à tête fraisée à six pans creux à capacité de charge réduite,20
• ISO 10644:199818739,IS,,ISO 10644:1998,Screw and washer assemblies with plain washers — Washer hardness classes 200 HV and 300 HV,Vis à rondelle plate incorporée — Rondelles de classes de dureté
• ISO 10645:199218740,IS,,ISO 10645:1992,Nuclear energy — Light water reactors — Calculation of the decay heat power in nuclear fuels,Énergie nucléaire — Réacteurs à eau légère — Calcul de la puis
• ISO 10649-1:201051320,IS,,ISO 10649-1:2010,Cutter arbors with parallel key and tenon drive — Part 1: General dimensions,Mandrins porte-fraise à entraînement par clavette et tenon — Partie 1: Dimen
• ISO 10649-2:201051321,IS,,ISO 10649-2:2010,Cutter arbors with parallel key and tenon drive — Part 2: Dimensions and designation of tool holders with hollow taper interface with flange contact surf
• ISO 10649-3:201046029,IS,,ISO 10649-3:2010,Cutter arbors with parallel key and tenon drive — Part 3: Dimensions and designation of tool holders with 7/24 taper for automatic tool changers,Mandrins
• ISO 10649-4:201046030,IS,,ISO 10649-4:2010,Cutter arbors with parallel key and tenon drive — Part 4: Dimensions and designation of tool holders with 7/24 taper without automatic tool changers,Mand
• ISO 10650-1:200438399,IS,,ISO 10650-1:2004,Dentistry — Powered polymerization activators — Part 1: Quartz tungsten halogen lamps,Art dentaire — Activateurs électriques de polymérisation — Partie 1
• ISO 10650-2:200739734,IS,,ISO 10650-2:2007,Dentistry — Powered polymerization activators — Part 2: Light-emitting diode (LED) lamps,Art dentaire — Activateurs électriques de polymérisation — Parti
• ISO 10650:201563424,IS,,ISO 10650:2015,Dentistry — Powered polymerization activators,Médecine bucco-dentaire — Activateurs électriques de polymérisation,2015-09-16,1,['11.060.20'],ISO/TC 106/SC
• ISO 10650:201873302,IS,,ISO 10650:2018,Dentistry — Powered polymerization activators,Médecine bucco-dentaire — Activateurs électriques de polymérisation,2018-08-28,2,['11.060.20'],ISO/TC 106/SC
• ISO 10651-1:199318746,IS,,ISO 10651-1:1993,Lung ventilators for medical use — Part 1: Requirements,Ventilateurs pulmonaires à usage médical — Partie 1: Prescriptions,1993-06-03,1,['11.040.10'],ISO
• ISO 10651-2:199622216,IS,,ISO 10651-2:1996,Lung ventilators for medical use — Part 2: Particular requirements for home care ventilators,Ventilateurs pulmonaires à usage médical — Partie 2: Prescri
• ISO 10651-2:200435973,IS,,ISO 10651-2:2004,Lung ventilators for medical use — Particular requirements for basic safety and essential performance — Part 2: Home care ventilators for ventilator-depe
• ISO 10651-3:199721436,IS,,ISO 10651-3:1997,Lung ventilators for medical use — Part 3: Particular requirements for emergency and transport ventilators,Ventilateurs pulmonaires à usage médical — Par
• ISO 10651-4:200230712,IS,,ISO 10651-4:2002,Lung ventilators — Part 4: Particular requirements for operator-powered resuscitators,Ventilateurs pulmonaires — Partie 4: Exigences relatives aux ressus
• ISO 10651-6:200435974,IS,,ISO 10651-6:2004,Lung ventilators for medical use — Particular requirements for basic safety and essential performance — Part 6: Home-care ventilatory support devices,Ven
• ISO 10656:199618750,IS,,ISO 10656:1996,Electric resistance welding — Integrated transformers for welding guns,Soudage électrique par résistance — Transformateurs incorporés pour pinces à souder,
• ISO 10656:1996/Cor 1:200034179,IS,Cor,ISO 10656:1996/Cor 1:2000,Electric resistance welding — Integrated transformers for welding guns — Technical Corrigendum 1,Soudage électrique par résistance — Transfor
• ISO 10658:19961310,IS,,ISO 10658:1996,Industrial trucks operating in special conditions of stacking with load laterally displaced by powered devices — Additional stability test,"Chariots de manu
• ISO 10663:199918754,IS,,ISO 10663:1999,Hexagon nuts with flange — Fine pitch thread,Écrous hexagonaux à embase cylindro-tronconique — Filetage à pas fin,1999-03-25,1,['21.060.20'],ISO/TC 2/SC 1
• ISO 10664:199918755,IS,,ISO 10664:1999,Hexalobular internal driving feature for bolts and screws,Empreinte à six lobes internes pour vis,1999-09-02,1,['21.060.10'],ISO/TC 2,9599,,[40257],"['en',
• ISO 10664:200540257,IS,,ISO 10664:2005,Hexalobular internal driving feature for bolts and screws,Empreinte à six lobes internes pour vis,2005-06-30,2,['21.060.10'],ISO/TC 2/SC 11,9599,[18755],[6
• ISO 10667-1:201156441,IS,,ISO 10667-1:2011,Assessment service delivery — Procedures and methods to assess people in work and organizational settings — Part 1: Requirements for the client,Livraison
• ISO 10667-2:201156436,IS,,ISO 10667-2:2011,Assessment service delivery — Procedures and methods to assess people in work and organizational settings — Part 2: Requirements for service providers,Li
• ISO 10673:199818763,IS,,ISO 10673:1998,"Plain washers for screw and washer assemblies — Small, normal and large series — Product grade A","Rondelles plates pour vis à rondelle plate incorporée —
• ISO 10675-1:200846039,IS,,ISO 10675-1:2008,"Non-destructive testing of welds — Acceptance levels for radiographic testing — Part 1: Steel, nickel, titanium and their alloys","Essais non destructi
• ISO 10675-1:201666908,IS,,ISO 10675-1:2016,"Non-destructive testing of welds — Acceptance levels for radiographic testing — Part 1: Steel, nickel, titanium and their alloys","Essais non destructi
• ISO 10675-2:201055420,IS,,ISO 10675-2:2010,Non-destructive testing of welds — Acceptance levels for radiographic testing — Part 2: Aluminium and its alloys,Essais non destructifs des assemblages s
• ISO 10675-2:201769609,IS,,ISO 10675-2:2017,Non-destructive testing of welds — Acceptance levels for radiographic testing — Part 2: Aluminium and its alloys,Essais non destructifs des assemblages s
• ISO 10678:201046019,IS,,ISO 10678:2010,"Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of photocatalytic activity of surfaces in an aqueous medium by degradation
• ISO 10679:201046040,IS,,ISO 10679:2010,Steel — Cast tool steel,Acier — Aciers moulés à outil,2010-01-13,1,['77.140.80'],ISO/TC 17/SC 11,9599,,[73043],"['en','fr','ru']",4
• ISO 10679:2010/Cor 1:201056228,IS,Cor,ISO 10679:2010/Cor 1:2010,Steel — Cast tool steel — Technical Corrigendum 1,Acier — Aciers moulés à outil — Rectificatif technique 1,2010-04-29,1,['77.140.80'],ISO/TC
• ISO 10683:200018772,IS,,ISO 10683:2000,Fasteners — Non-electrolytically applied zinc flake coatings,Éléments de fixation — Revêtements non électrolytiques de lamelles de zinc,2000-07-27,1,"['21.
• ISO 10683:201455924,IS,,ISO 10683:2014,Fasteners — Non-electrolytically applied zinc flake coatings,Fixations — Revêtements non électrolytiques de zinc lamellaire,2014-06-10,2,"['21.060.01','25.
• ISO 10685-1:201152929,IS,,ISO 10685-1:2011,Ophthalmic optics — Spectacle frames and sunglasses electronic catalogue and identification — Part 1: Product identification and electronic catalogue pro
• ISO 10685-2:201254618,IS,,ISO 10685-2:2012,Ophthalmic optics — Spectacle frames and sunglasses electronic catalogue and identification — Part 2: Commercial information,Optique ophtalmique — Catalo
• ISO 10685-3:201254619,IS,,ISO 10685-3:2012,Ophthalmic optics — Spectacle frames and sunglasses electronic catalogue and identification — Part 3: Technical information,Optique ophtalmique — Catalog
• ISO 10703:199718792,IS,,ISO 10703:1997,Water quality — Determination of the activity concentration of radionuclides by high resolution gamma-ray spectrometry,Qualité de l'eau — Détermination de
• ISO 10703:200742756,IS,,ISO 10703:2007,Water quality — Determination of the activity concentration of radionuclides — Method by high resolution gamma-ray spectrometry,Qualité de l'eau — Détermin
• ISO 10704:200946063,IS,,ISO 10704:2009,Water quality — Measurement of gross alpha and gross beta activity in non-saline water — Thin source deposit method,Qualité de l'eau — Mesurage des activit
• ISO 10713:199218801,IS,,ISO 10713:1992,Jewellery — Gold alloy coatings,Joaillerie — Revêtements d'alliages d'or,1992-11-19,1,['39.060'],ISO/TC 174,9599,,[84976],"['en','fr']",3
• ISO 10714:199218802,IS,,ISO 10714:1992,Steel and iron — Determination of phosphorus content — Phosphovanadomolybdate spectrophotometric method,Aciers et fontes — Dosage du phosphore — Méthode pa
• ISO 10715:199718803,IS,,ISO 10715:1997,Natural gas — Sampling guidelines,Gaz naturel — Lignes directrices pour l'échantillonnage,1997-05-29,1,['75.060'],ISO/TC 193/SC 1,9599,,"[54983,67136,76105
• ISO 10716:199418809,IS,,ISO 10716:1994,Paper and board — Determination of alkali reserve,Papier et carton — Détermination de la réserve alcaline,1994-12-22,1,['85.060'],ISO/TC 6,9599,,[83376],"[
• ISO 10718:199318811,IS,,ISO 10718:1993,"Cork stoppers — Enumeration of colony-forming units of yeasts, moulds and bacteria capable of growth in an alcoholic medium","Bouchons en liège — Dénombre
• ISO 10718:200235026,IS,,ISO 10718:2002,"Cork stoppers — Enumeration of colony-forming units of yeasts, moulds and bacteria capable of growth in an alcoholic medium","Bouchons en liège — Dénombre
• ISO 10721-1:199718814,IS,,ISO 10721-1:1997,Steel structures — Part 1: Materials and design,Structures en acier — Partie 1: Matériaux et conception,1997-02-20,1,['91.080.13'],ISO/TC 167,9599,,[8764
• ISO 10721-2:19992348,IS,,ISO 10721-2:1999,Steel structures — Part 2: Fabrication and erection,Structures en acier — Partie 2: Fabrication et montage,1999-05-06,1,['91.080.13'],ISO/TC 167,9599,,"[7
• ISO 10721-2:1999/Cor 1:199933062,IS,Cor,ISO 10721-2:1999/Cor 1:1999,Steel structures — Part 2: Fabrication and erection — Technical Corrigendum 1,Structures en acier — Partie 2: Fabrication et montage — Rect
• ISO 10722:200745502,IS,,ISO 10722:2007,Geosynthetics — Index test procedure for the evaluation of mechanical damage under repeated loading — Damage caused by granular material,Géosynthétiques —
• ISO 10723:199518816,IS,,ISO 10723:1995,Natural gas — Performance evaluation for on-line analytical systems,Gaz naturel — Évaluation des performances des systèmes d'analyse en ligne,1995-12-27,1,
• ISO 10723:1995/Cor 1:199830538,IS,Cor,ISO 10723:1995/Cor 1:1998,Natural gas — Performance evaluation for on-line analytical systems — Technical Corrigendum 1,Gaz naturel — Évaluation des performances des s
• ISO 10724:199418817,IS,,ISO 10724:1994,Plastics — Thermosetting moulding materials — Injection moulding of multipurpose test specimens,Plastiques — Matières à mouler thermodurcissables — Moulage
• ISO 10726:199218819,IS,,ISO 10726:1992,Portable chain saws — Chain catcher — Dimensions and mechanical strength,Scies à chaîne portatives — Enrouleur de chaîne — Dimensions et résistance mécaniq
• ISO 10727:199518820,IS,,ISO 10727:1995,Tea and instant tea in solid form — Determination of caffeine content — Method using high-performance liquid chromatography,Thé et thé soluble sous forme s
• ISO 10752:199418841,IS,,ISO 10752:1994,Coal sizing equipment — Performance evaluation,Charbon — Équipement pour la granulométrie — Évaluation de l'aptitude à l'emploi,1994-05-19,1,['73.120'],ISO
• ISO 10752:201975886,IS,,ISO 10752:2019,Coal sizing equipment — Performance evaluation,Équipement pour la granulométrie du charbon — Évaluation de l'aptitude à l'emploi,2019-06-12,2,['73.120'],IS
• ISO 10753:199418842,IS,,ISO 10753:1994,Coal preparation plant — Assessment of the liability to breakdown in water of materials associated with coal seams,Ateliers de préparation du charbon — Éva
• ISO 10762:199722766,IS,,ISO 10762:1997,Hydraulic fluid power — Cylinder mounting dimensions — 10 MPa (100 bar) series,Transmissions hydrauliques — Dimensions d'interchangeabilité des vérins — Sé
• ISO 10763:19941620,IS,,ISO 10763:1994,"Hydraulic fluid power — Plain-end, seamless and welded precision steel tubes — Dimensions and nominal working pressures","Transmissions hydrauliques — Tube
• ISO 10763:201973040,IS,,ISO 10763:2019,"Hydraulic fluid power — Plain-end, seamless and welded precision steel tubes — Dimensions and nominal working pressures","Transmissions hydrauliques — Tub
• ISO 10766:19961944,IS,,ISO 10766:1996,Hydraulic fluid power — Cylinders — Housing dimensions for rectangular-section-cut bearing rings for pistons and rods,Transmissions hydrauliques — Vérins —
• ISO 10766:200636243,IS,,ISO 10766:2006,Hydraulic fluid power — Cylinders — Housing dimensions for rectangular-section-cut bearing rings for pistons and rods,Transmissions hydrauliques — Vérins —
• ISO 10767-1:19961701,IS,,ISO 10767-1:1996,Hydraulic fluid power — Determination of pressure ripple levels generated in systems and components — Part 1: Precision method for pumps,Transmissions hyd
• ISO 10767-3:199925882,IS,,ISO 10767-3:1999,Hydraulic fluid power — Determination of pressure ripple levels generated in systems and components — Part 3: Method for motors,Transmissions hydraulique
• ISO 10770-1:19981757,IS,,ISO 10770-1:1998,Hydraulic fluid power — Electrically modulated hydraulic control valves — Part 1: Test methods for four-way directional flow control valves,Transmissions
• ISO 10770-2:199822770,IS,,ISO 10770-2:1998,Hydraulic fluid power — Electrically modulated hydraulic control valves — Part 2: Test methods for three-way directional flow control valves,Transmission
• ISO 10770-3:200743219,IS,,ISO 10770-3:2007,Hydraulic fluid power — Electrically modulated hydraulic control valves — Part 3: Test methods for pressure control valves,Transmissions hydrauliques — D
• ISO 10771-1:200232175,IS,,ISO 10771-1:2002,Hydraulic fluid power — Fatigue pressure testing of metal pressure-containing envelopes — Part 1: Test method,Transmissions hydrauliques — Essais de fati
• ISO 10775:199518852,IS,,ISO 10775:1995,"Paper, board and pulps — Determination of cadmium content — Atomic absorption spectrometric method","Papier, carton et pâtes — Détermination de la teneur
• ISO 10785:201146098,IS,,ISO 10785:2011,Space systems — Bellows — Design and operation,Systèmes spatiaux — Souffleries — Conception et fonctionnement,2011-09-27,1,['49.140'],ISO/TC 20/SC 14,9599,
• ISO 10786:201146099,IS,,ISO 10786:2011,Space systems — Structural components and assemblies,Systèmes spatiaux — Composants et assemblages de structure,2011-07-08,1,['49.140'],ISO/TC 20/SC 14,959
• ISO 10790:199418856,IS,,ISO 10790:1994,Measurement of fluid flow in closed conduits — Coriolis mass flowmeters,Mesure de débit des fluides dans les conduites fermées — Débitmètres massiques à ef
• ISO 10790:199928531,IS,,ISO 10790:1999,"Measurement of fluid flow in closed conduits — Guidance to the selection, installation and use of Coriolis meters (mass flow, density and volume flow meas
• ISO 10790:1999/Amd 1:200334890,IS,Amd,ISO 10790:1999/Amd 1:2003,"Measurement of fluid flow in closed conduits — Guidance to the selection, installation and use of Coriolis meters (mass flow, density and vo
• ISO 10791-1:199818857,IS,,ISO 10791-1:1998,Test conditions for machining centres — Part 1: Geometric tests for machines with horizontal spindle and with accessory heads (horizontal Z-axis),Conditi
• ISO 10791-2:200118858,IS,,ISO 10791-2:2001,Test conditions for machining centres — Part 2: Geometric tests for machines with vertical spindle or universal heads with vertical primary rotary axis (
• ISO 10791-6:199818861,IS,,ISO 10791-6:1998,"Test conditions for machining centres — Part 6: Accuracy of feeds, speeds and interpolations","Conditions d'essai pour centres d'usinage — Partie 6: Pré
• ISO 10791-6:1998/Cor 1:200440189,IS,Cor,ISO 10791-6:1998/Cor 1:2004,"Test conditions for machining centres — Part 6: Accuracy of feeds, speeds and interpolations — Technical Corrigendum 1","Conditions d'essa
• ISO 10791-7:199824692,IS,,ISO 10791-7:1998,Test conditions for machining centres — Part 7: Accuracy of a finished test piece,Conditions d'essai pour centres d'usinage — Partie 7: Précision d'une p
• ISO 10791-7:201454730,IS,,ISO 10791-7:2014,Test conditions for machining centres — Part 7: Accuracy of finished test pieces,Conditions d'essai pour centres d'usinage — Partie 7: Exactitude des piè
• ISO 10791-10:200742038,IS,,ISO 10791-10:2007,Test conditions for machining centres — Part 10: Evaluation of thermal distortions,Conditions d'essai des centres d'usinage — Partie 10: Évaluation des
• ISO 10794:201156084,IS,,ISO 10794:2011,"Space systems — Programme management — Material, mechanical parts and processes","Systèmes spatiaux — Management de programme — Matériaux, éléments mécani
• ISO 10795:201146103,IS,,ISO 10795:2011,Space systems — Programme management and quality — Vocabulary,Systèmes spatiaux — Management de programme et qualité — Vocabulaire,2011-08-08,1,"['01.040.4
• ISO 10799:200132896,IS,,ISO 10799:2001,"Structural steels — Cold-formed, welded, structural hollow sections — Technical delivery requirements",Aciers de construction — Profils creux pour la cons
• ISO 10802:199218864,IS,,ISO 10802:1992,Ductile iron pipelines — Hydrostatic testing after installation,Canalisations en fonte ductile — Essais hydrostatiques après pose,1992-12-17,1,['23.040.01'
• ISO 10803:19991232,IS,,ISO 10803:1999,Design method for ductile iron pipes,Méthode de calcul des tuyaux en fonte ductile,1999-12-02,1,['23.040.10'],ISO/TC 5/SC 2,9599,,[50914],"['en','fr']",31
• ISO 10803:201150914,IS,,ISO 10803:2011,Design method for ductile iron pipes,Méthode de calcul des tuyaux en fonte ductile,2011-12-02,2,['23.040.10'],ISO/TC 5/SC 2,9599,[1232],[82597],['en'],60
• ISO 10804-1:19961394,IS,,ISO 10804-1:1996,Restrained joint systems for ductile iron pipelines — Part 1: Design rules and type testing,Assemblages verrouillés pour canalisations en fonte ductile —
• ISO 10804:201050105,IS,,ISO 10804:2010,Restrained joint systems for ductile iron pipelines — Design rules and type testing,Assemblages verrouillés pour canalisations en fonte ductile — Règles de
• ISO 10806:19941304,IS,,ISO 10806:1994,Pipework — Non-alloyed and stainless steel fittings for corrugated flexible metallic hoses,Tuyauteries — Raccords en acier non allié et acier inoxydable pou
• ISO 10810:201046134,IS,,ISO 10810:2010,Surface chemical analysis — X-ray photoelectron spectroscopy — Guidelines for analysis,Analyse chimique des surfaces — Spectroscopie de photoélectrons par

← records 12,001–12,400 · All of Withdrawn and superseded ISO standards · records 12,801 on →