Records 12,801–13,200 — Withdrawn and superseded ISO standards

Records 12,801 to 13,200 of 24,640. Each links to its own page, which carries the source URL and the quoted line that states the value.

• ISO 10813-1:200440131,IS,,ISO 10813-1:2004,Vibration generating machines — Guidance for selection — Part 1: Equipment for environmental testing,Générateurs de vibrations — Lignes directrices pour
• ISO 10813-1:2004/Cor 1:200645410,IS,Cor,ISO 10813-1:2004/Cor 1:2006,Vibration generating machines — Guidance for selection — Part 1: Equipment for environmental testing — Technical Corrigendum 1,Générateurs
• ISO 10814:199622733,IS,,ISO 10814:1996,Mechanical vibration — Susceptibility and sensitivity of machines to unbalance,Vibrations mécaniques — Susceptibilité et sensibilité des machines aux balou
• ISO 10815:199618865,IS,,ISO 10815:1996,Mechanical vibration — Measurement of vibration generated internally in railway tunnels by the passage of trains,Vibrations mécaniques — Mesurage des vibra
• ISO 10816-1:199518866,IS,,ISO 10816-1:1995,Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 1: General guidelines,Vibrations mécaniques — Évaluat
• ISO 10816-1:1995/Amd 1:200952123,IS,Amd,ISO 10816-1:1995/Amd 1:2009,Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 1: General guidelines — Amendment 1,Vib
• ISO 10816-2:19961697,IS,,ISO 10816-2:1996,Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 2: Large land-based steam turbine generator sets in ex
• ISO 10816-2:200128903,IS,,ISO 10816-2:2001,"Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 2: Land-based steam turbines and generators in exces
• ISO 10816-2:2001/Cor 1:200440763,IS,Cor,ISO 10816-2:2001/Cor 1:2004,"Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 2: Land-based steam turbines and gener
• ISO 10816-2:200951099,IS,,ISO 10816-2:2009,"Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 2: Land-based steam turbines and generators in exces
• ISO 10816-3:19981661,IS,,ISO 10816-3:1998,Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 3: Industrial machines with nominal power above 15 kW
• ISO 10816-3:200950528,IS,,ISO 10816-3:2009,Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 3: Industrial machines with nominal power above 15 kW
• ISO 10816-3:2009/Amd 1:201771200,IS,Amd,ISO 10816-3:2009/Amd 1:2017,Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 3: Industrial machines with nominal pow
• ISO 10816-4:19981625,IS,,ISO 10816-4:1998,Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 4: Gas turbine driven sets excluding aircraft derivati
• ISO 10816-4:200940458,IS,,ISO 10816-4:2009,Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 4: Gas turbine sets with fluid-film bearings,Vibratio
• ISO 10816-4:2009/Amd 1:201771201,IS,Amd,ISO 10816-4:2009/Amd 1:2017,Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 4: Gas turbine sets with fluid-film bea
• ISO 10816-5:20001589,IS,,ISO 10816-5:2000,Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 5: Machine sets in hydraulic power generating and pump
• ISO 10816-8:201456782,IS,,ISO 10816-8:2014,Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 8: Reciprocating compressor systems,Vibrations mécani
• ISO 10816-21:201560328,IS,,ISO 10816-21:2015,Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 21: Horizontal axis wind turbines with gearbox,Vibra
• ISO 10819:19961418,IS,,ISO 10819:1996,Mechanical vibration and shock — Hand-arm vibration — Method for the measurement and evaluation of the vibration transmissibility of gloves at the palm of t
• ISO 10823:19961787,IS,,ISO 10823:1996,Guidance on the selection of roller chain drives,Méthode de sélection des transmissions par chaîne à rouleaux,1996-02-01,1,['21.220.30'],ISO/TC 100,9599,,[3
• ISO 10825:19952042,IS,,ISO 10825:1995,Gears — Wear and damage to gear teeth — Terminology,Engrenages — Usure et défauts des dentures — Terminologie,1995-08-17,1,"['21.200','01.040.21']",ISO/TC 6
• ISO 10833:199218868,IS,,ISO 10833:1992,Textile floor coverings — Determination of mechanical damage at a cut edge — Modified Vettermann drum tester method,Revêtements de sol textiles — Détermina
• ISO 10833:200126833,IS,,ISO 10833:2001,Textile floor coverings — Determination of resistance to damage at cut edges using the modified Vettermann drum test,Revêtements de sol textiles — Détermin
• ISO 10833:201761664,IS,,ISO 10833:2017,Textile floor coverings — Determination of resistance to damage at cut edges using the modified Vettermann drum test,Revêtements de sol textiles — Détermin
• ISO 10835:199518870,IS,,ISO 10835:1995,Direct reduced iron — Sampling and sample preparation — Manual methods for reduced pellets and lump ores,Minerais de fer préréduits — Échantillonnage et pr
• ISO 10836:199418872,IS,,ISO 10836:1994,Iron ores — Method of sampling and sample preparation for physical testing,Minerais de fer — Méthode d'échantillonnage et préparation des échantillons pour
• ISO 10838-1:200018874,IS,,ISO 10838-1:2000,Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels — Part 1: Metal fittings for pipes of nominal outside diameter less t
• ISO 10838-2:200018875,IS,,ISO 10838-2:2000,Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels — Part 2: Metal fittings for pipes of nominal outside diameter greate
• ISO 10838-3:200132238,IS,,ISO 10838-3:2001,Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels — Part 3: Thermoplastics fittings for pipes of nominal outside diamet
• ISO 10840:200331268,IS,,ISO 10840:2003,Plastics — Guidance for the use of standard fire tests,Plastiques — Lignes directrices pour l'utilisation d'essais au feu normalisés,2003-03-12,1,"['83.080
• ISO 10842:200638258,IS,,ISO 10842:2006,Aircraft — Ground service connections — Locations and types,Aéronefs — Prises de service au sol — Emplacements et types,2006-10-13,1,['49.100'],ISO/TC 20/S
• ISO 10844:19941341,IS,,ISO 10844:1994,Acoustics — Specification of test tracks for the purpose of measuring noise emitted by road vehicles,Acoustique — Spécification des surfaces d'essai pour le
• ISO 10844:201145358,IS,,ISO 10844:2011,Acoustics — Specification of test tracks for measuring noise emitted by road vehicles and their tyres,Acoustique — Spécification des surfaces d'essai pour
• ISO 10844:201464218,IS,,ISO 10844:2014,Acoustics — Specification of test tracks for measuring noise emitted by road vehicles and their tyres,Acoustique — Spécification des surfaces d'essai pour
• ISO 10845-1:201046190,IS,,ISO 10845-1:2010,"Construction procurement — Part 1: Processes, methods and procedures","Marchés de construction — Partie 1: Processus, méthodes et procédures",2010-06-28
• ISO 10845-2:201146191,IS,,ISO 10845-2:2011,Construction procurement — Part 2: Formatting and compilation of procurement documentation,Marchés de construction — Partie 2: Mise en forme et compilati
• ISO 10845-3:201146192,IS,,ISO 10845-3:2011,Construction procurement — Part 3: Standard conditions of tender,Marchés de construction — Partie 3: Conditions types normalisées des soumissions,2011-01
• ISO 10845-4:201146193,IS,,ISO 10845-4:2011,Construction procurement — Part 4: Standard conditions for the calling for expressions of interest,Marchés de construction — Partie 4: Conditions-types n
• ISO 10846-1:19971233,IS,,ISO 10846-1:1997,Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements — Part 1: Principles and guidelines,Acoustiqu
• ISO 10846-2:199722067,IS,,ISO 10846-2:1997,Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements — Part 2: Dynamic stiffness of elastic suppo
• ISO 10848-1:200638284,IS,,ISO 10848-1:2006,Acoustics — Laboratory measurement of the flanking transmission of airborne and impact sound between adjoining rooms — Part 1: Frame document,Acoustique
• ISO 10848-2:200635004,IS,,ISO 10848-2:2006,Acoustics — Laboratory measurement of the flanking transmission of airborne and impact sound between adjoining rooms — Part 2: Application to light eleme
• ISO 10848-2:2006/Cor 1:200745625,IS,Cor,ISO 10848-2:2006/Cor 1:2007,Acoustics — Laboratory measurement of the flanking transmission of airborne and impact sound between adjoining rooms — Part 2: Application
• ISO 10848-3:200635003,IS,,ISO 10848-3:2006,Acoustics — Laboratory measurement of the flanking transmission of airborne and impact sound between adjoining rooms — Part 3: Application to light eleme
• ISO 10848-4:201045360,IS,,ISO 10848-4:2010,Acoustics — Laboratory measurement of the flanking transmission of airborne and impact sound between adjoining rooms — Part 4: Application to junctions w
• ISO 10849:199618881,IS,,ISO 10849:1996,Stationary source emissions — Determination of the mass concentration of nitrogen oxides — Performance characteristics of automated measuring systems,Émiss
• ISO 10855-1:201846198,IS,,ISO 10855-1:2018,"Offshore containers and associated lifting sets — Part 1: Design, manufacture and marking of offshore containers","Conteneurs offshore et dispositifs de
• ISO 10855-2:201865181,IS,,ISO 10855-2:2018,"Offshore containers and associated lifting sets — Part 2: Design, manufacture and marking of lifting sets","Conteneurs offshore et dispositifs de levage
• ISO 10855-3:201865183,IS,,ISO 10855-3:2018,"Offshore containers and associated lifting sets — Part 3: Periodic inspection, examination and testing","Containeurs offshore et dispositifs de levage a
• ISO 10863:201154053,IS,,ISO 10863:2011,Non-destructive testing of welds — Ultrasonic testing — Use of time-of-flight diffraction technique (TOFD),Contrôle non destructif des assemblages soudés —
• ISO 10872:201046253,IS,,ISO 10872:2010,"Water quality — Determination of the toxic effect of sediment and soil samples on growth, fertility and reproduction of Caenorhabditis elegans (Nematoda)"
• ISO 10873:201046254,IS,,ISO 10873:2010,Dentistry — Denture adhesives,Médecine bucco-dentaire — Adhésifs pour prothèses dentaires,2010-09-03,1,['97.170'],ISO/TC 106/SC 7,9599,,[72380],"['en','fr'
• ISO 10873:202172380,IS,,ISO 10873:2021,Dentistry — Denture adhesives,Médecine bucco-dentaire — Adhésifs pour prothèses dentaires,2021-07-01,2,['97.170'],ISO/TC 106/SC 7,9599,[46254],[88004],"['e
• ISO 10882-1:200126143,IS,,ISO 10882-1:2001,Health and safety in welding and allied processes — Sampling of airborne particles and gases in the operator's breathing zone — Part 1: Sampling of airbo
• ISO 10882-1:201143385,IS,,ISO 10882-1:2011,Health and safety in welding and allied processes — Sampling of airborne particles and gases in the operator's breathing zone — Part 1: Sampling of airbo
• ISO 10882-2:200026144,IS,,ISO 10882-2:2000,Health and safety in welding and allied processes — Sampling of airborne particles and gases in the operator's breathing zone — Part 2: Sampling of gases
• ISO 10884:199518896,IS,,ISO 10884:1995,Manually portable brush-cutters and grass-trimmers with internal combustion engine — Determination of sound power levels — Engineering method (Grade 2),Déb
• ISO 10889-1:19972747,IS,,ISO 10889-1:1997,"Tool holders with cylindrical shank — Part 1: Cylindrical shank, location bore — Technical delivery conditions","Porte-outil à queue cylindrique — Partie
• ISO 10889-2:19972743,IS,,ISO 10889-2:1997,"Tool holders with cylindrical shank — Part 2: Type A, shanks for tool holders of special designs",Porte-outil à queue cylindrique — Partie 2: Porte-outil
• ISO 10889-2:200438551,IS,,ISO 10889-2:2004,"Tool holders with cylindrical shank — Part 2: Type A, shanks for tool holders of special designs",Porte-outil à queue cylindrique — Partie 2: Porte-outi
• ISO 10889-3:19972741,IS,,ISO 10889-3:1997,Tool holders with cylindrical shank — Part 3: Type B with rectangular radial seat,Porte-outil à queue cylindrique — Partie 3: Porte-outil radial de type B
• ISO 10889-3:200438552,IS,,ISO 10889-3:2004,Tool holders with cylindrical shank — Part 3: Type B with rectangular radial seat,Porte-outil à queue cylindrique — Partie 3: Porte-outil radial de type
• ISO 10889-4:19972708,IS,,ISO 10889-4:1997,Tool holders with cylindrical shank — Part 4: Type C with rectangular axial seat,Porte-outil à queue cylindrique — Partie 4: Porte-outil axial de type C,1
• ISO 10889-4:200438553,IS,,ISO 10889-4:2004,Tool holders with cylindrical shank — Part 4: Type C with rectangular axial seat,Porte-outil à queue cylindrique — Partie 4: Porte-outil axial de type C,
• ISO 10889-5:19972717,IS,,ISO 10889-5:1997,Tool holders with cylindrical shank — Part 5: Type D with more than one rectangular seat,Porte-outil à queue cylindrique — Partie 5: Porte-outil de type D
• ISO 10889-6:19972699,IS,,ISO 10889-6:1997,Tool holders with cylindrical shank — Part 6: Type E with cylindrical seat,Porte-outil à queue cylindrique — Partie 6: Porte-outil de type E pour outils à
• ISO 10889-6:200438554,IS,,ISO 10889-6:2004,Tool holders with cylindrical shank — Part 6: Type E with cylindrical seat,Porte-outil à queue cylindrique — Partie 6: Porte-outil de type E pour outils
• ISO 10889-7:199721890,IS,,ISO 10889-7:1997,Tool holders with cylindrical shank — Part 7: Type F with taper seat,Porte-outil à queue cylindrique — Partie 7: Porte-outil de type F pour outils à queu
• ISO 10889-7:200438555,IS,,ISO 10889-7:2004,Tool holders with cylindrical shank — Part 7: Type F with taper seat,Porte-outil à queue cylindrique — Partie 7: Porte-outil de type F pour outils à queu
• ISO 10893-6:201144675,IS,,ISO 10893-6:2011,Non-destructive testing of steel tubes — Part 6: Radiographic testing of the weld seam of welded steel tubes for the detection of imperfections,Essais no
• ISO 10893-7:201146367,IS,,ISO 10893-7:2011,Non-destructive testing of steel tubes — Part 7: Digital radiographic testing of the weld seam of welded steel tubes for the detection of imperfections,E
• ISO 10896-1:201250580,IS,,ISO 10896-1:2012,Rough-terrain trucks — Safety requirements and verification — Part 1: Variable-reach trucks,Chariots tout-terrain — Exigences de sécurité et vérification
• ISO 10897:19962745,IS,,ISO 10897:1996,"Collets for tool holders with taper ratio 1:10 — Collets, hoders,nuts","Pinces de serrage pour mandrins à conicité 1:10 — Pinces, mandrins à pinces, écrous
• ISO 10898:199218899,IS,,ISO 10898:1992,Spot drills,Forets à pointer,1992-01-30,1,['25.100.30'],ISO/TC 29/SC 9,9599,,[65994],"['en','fr']",2
• ISO 10907-1:19962688,IS,,ISO 10907-1:1996,Tools for moulding — Locating rings — Part 1: Locating rings for mounting without thermal insulating sheets in small or medium moulds — Types A and B,Outi
• ISO 10911:19942697,IS,,ISO 10911:1994,Solid hardmetal end mills with parallel shank — Dimensions,Fraises cylindriques deux tailles monobloc en métaux-durs — Dimensions,1994-11-10,1,['25.100.20']
• ISO 10911:201043573,IS,,ISO 10911:2010,Solid hardmetal end mills with cylindrical shank — Dimensions,Fraises cylindriques deux tailles monobloc en métaux-durs — Dimensions,2010-02-18,2,['25.100.
• ISO 10916:201446394,IS,,ISO 10916:2014,Calculation of the impact of daylight utilization on the net and final energy demand for lighting,Calcul de l'effet d'utiliser la lumière du jour à la dema
• ISO 10920:199718904,IS,,ISO 10920:1997,Gas cylinders — 25E taper thread for connection of valves to gas cylinders — Specification,Bouteilles à gaz — Filetages coniques 25E pour le raccordement d
• ISO 10924-1:200946404,IS,,ISO 10924-1:2009,Road vehicles — Circuit breakers — Part 1: Definitions and general test requirements,Véhicules routiers — Coupe-circuits — Partie 1: Définitions et exige
• ISO 10924-1:201664005,IS,,ISO 10924-1:2016,Road vehicles — Circuit breakers — Part 1: Definitions and general test requirements,Véhicules routiers — Coupe-circuits — Partie 1: Définitions et exige
• ISO 10924-2:201452436,IS,,ISO 10924-2:2014,Road vehicles — Circuit breakers — Part 2: User's guide,Véhicules routiers — Coupe-circuits — Partie 2: Guide de l'utilisateur,2014-02-18,1,['43.040.10']
• ISO 10924-3:201558089,IS,,ISO 10924-3:2015,"Road vehicles — Circuit breakers — Part 3: Miniature circuit breakers with tabs (Blade type), Form CB11","Véhicules routier — Coupe circuites — Partie 3
• ISO 10924-4:200946405,IS,,ISO 10924-4:2009,"Road vehicles — Circuit breakers — Part 4: Medium circuit breakers with tabs (Blade type), Form CB15","Véhicules routiers — Coupe-circuits — Partie 4: C
• ISO 10924-4:201564006,IS,,ISO 10924-4:2015,"Road vehicles — Circuit breakers — Part 4: Medium circuit breakers with tabs (Blade type), Form CB15","Véhicules routiers — Coupe-circuits — Partie 4: C
• ISO 10924-5:201660999,IS,,ISO 10924-5:2016,Road vehicles — Circuit breakers — Part 5: Circuit breakers with bolt with rated voltage of 450 V,Véhicules routiers — Coupe-circuits — Partie 5: Coupe c
• ISO 10927:201146417,IS,,ISO 10927:2011,Plastics — Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-fl
• ISO 10928:19971226,IS,,ISO 10928:1997,Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Methods for regression analysis and their use,Systèmes de canal
• ISO 10928:200938777,IS,,ISO 10928:2009,Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Methods for regression analysis and their use,Systèmes de cana
• ISO 10928:2009/Amd 1:201363234,IS,Amd,ISO 10928:2009/Amd 1:2013,Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Methods for regression analysis and their use —
• ISO 10928:201668568,IS,,ISO 10928:2016,Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Methods for regression analysis and their use,Systèmes de cana
• ISO 10931-1:19971163,IS,,ISO 10931-1:1997,Plastics piping systems for industrial applications — Poly(vinylidene fluoride) (PVDF) — Part 1: General,Systèmes de canalisation en matières plastiques p
• ISO 10931-2:199721516,IS,,ISO 10931-2:1997,Plastics piping systems for industrial applications — Poly(vinylidene fluoride) (PVDF) — Part 2: Pipes,Systèmes de canalisation en matières plastiques po
• ISO 10931-3:199621517,IS,,ISO 10931-3:1996,Plastics piping systems for industrial applications — Poly(vinylidene fluoride) (PVDF) — Part 3: Fittings,Systèmes de canalisation en matières plastiques
• ISO 10931-4:19971523,IS,,ISO 10931-4:1997,Plastics piping systems for industrial applications — Poly(vinylidene fluoride) (PVDF) — Part 4: Valves,Systèmes de canalisation en matières plastiques po
• ISO 10931-5:199821519,IS,,ISO 10931-5:1998,Plastics piping systems for industrial applications — Poly(vinylidene fluoride) (PVDF) — Part 5: Fitness for purpose of the system,Systèmes de canalisati
• ISO 10933:19971361,IS,,ISO 10933:1997,Polyethylene (PE) valves for gas distribution systems,Robinets en polyéthylène (PE) pour distribution de gaz,1997-11-06,1,"['75.200','83.140.30']",ISO/TC 13
• ISO 10934-1:200235112,IS,,ISO 10934-1:2002,Optics and optical instruments — Vocabulary for microscopy — Part 1: Light microscopy,Optique et instruments d'optique — Vocabulaire relatif à la microsc
• ISO 10934-2:200739473,IS,,ISO 10934-2:2007,Optics and optical instruments — Vocabulary for microscopy — Part 2: Advanced techniques in light microscopy,Optique et instruments d'optique — Vocabulai
• ISO 10934:202077327,IS,,ISO 10934:2020,Microscopes — Vocabulary for light microscopy,Microscopes — Vocabulaire relatif à la microscopie optique,2020-08-20,1,"['37.020','01.040.37']",ISO/TC 172/S
• ISO 10935:199618911,IS,,ISO 10935:1996,Optics and optical instruments — Microscopes — Interfacing connection type C,Optique et instruments d'optique — Microscopes — Raccord d'interface de type C
• ISO 10936-1:200018912,IS,,ISO 10936-1:2000,Optics and optical instruments — Operation microscopes — Part 1: Requirements and test methods,Optique et instruments d'optique — Microscopes chirurgicau
• ISO 10936-2:200129652,IS,,ISO 10936-2:2001,Optics and optical instruments — Operation microscopes — Part 2: Light hazard from operation microscopes used in ocular surgery,Optique et instruments d'
• ISO 10937:199718913,IS,,ISO 10937:1997,Optics and optical instruments — Microscopes — Diameter of interchangeable eyepieces for microscopes with tube length 160 mm,Optique et instruments d'optiq
• ISO 10937:200033193,IS,,ISO 10937:2000,Optics and optical instruments — Microscopes — Diameter of interchangeable eyepieces,Optique et instruments d'optique — Microscopes — Diamètre d'oculaires
• ISO 10938:199818914,IS,,ISO 10938:1998,Ophthalmic instruments — Chart projectors,Instruments ophtalmiques — Projecteurs d'optotypes,1998-05-14,1,['11.040.70'],ISO/TC 172/SC 7,9599,,"[54970,63691
• ISO 10939:199818915,IS,,ISO 10939:1998,Ophthalmic instruments — Slit-lamp microscopes,Instruments ophtalmiques — Microscopes avec lampe à fente,1998-07-16,1,['11.040.70'],ISO/TC 172/SC 7,9599,,[
• ISO 10939:1998/Cor 1:200033789,IS,Cor,ISO 10939:1998/Cor 1:2000,Ophthalmic instruments — Slit-lamp microscopes — Technical Corrigendum 1,Instruments ophtalmiques — Microscopes avec lampe à fente — Rectific
• ISO 10939:200739139,IS,,ISO 10939:2007,Ophthalmic instruments — Slit-lamp microscopes,Instruments ophtalmiques — Microscopes avec lampe à fente,2007-01-18,2,['11.040.70'],ISO/TC 172/SC 7,9599,"[
• ISO 10940:199818916,IS,,ISO 10940:1998,Ophthalmic instruments — Fundus cameras,Instruments ophtalmiques — Appareils photographiques du fond de l'oeil,1998-04-23,1,['11.040.70'],ISO/TC 172/SC 7,9
• ISO 10942:199818918,IS,,ISO 10942:1998,Ophthalmic instruments — Direct ophthalmoscopes,Instruments ophtalmiques — Ophtalmoscopes directs,1998-04-23,1,['11.040.70'],ISO/TC 172/SC 7,9599,,[39141],
• ISO 10942:1998/Cor 1:199830912,IS,Cor,ISO 10942:1998/Cor 1:1998,Ophthalmic instruments — Direct ophthalmoscopes — Technical Corrigendum 1,Instruments ophtalmiques — Ophtalmoscopes directs — Rectificatif te
• ISO 10942:200639141,IS,,ISO 10942:2006,Ophthalmic instruments — Direct ophthalmoscopes,Instruments ophtalmiques — Ophtalmoscopes directs,2006-06-09,2,['11.040.70'],ISO/TC 172/SC 7,9599,"[30912,1
• ISO 10943:199818919,IS,,ISO 10943:1998,Ophthalmic instruments — Indirect ophthalmoscopes,Instruments ophtalmiques — Ophtalmoscopes indirects,1998-04-23,1,['11.040.70'],ISO/TC 172/SC 7,9599,,[391
• ISO 10943:200639142,IS,,ISO 10943:2006,Ophthalmic instruments — Indirect ophthalmoscopes,Instruments ophtalmiques — Ophtalmoscopes indirects,2006-06-09,2,['11.040.70'],ISO/TC 172/SC 7,9599,[1891
• ISO 10943:201157205,IS,,ISO 10943:2011,Ophthalmic instruments — Indirect ophthalmoscopes,Instruments ophtalmiques — Ophtalmoscopes indirects,2011-08-05,3,['11.040.70'],ISO/TC 172/SC 7,9599,[3914
• ISO 10944:199818920,IS,,ISO 10944:1998,Ophthalmic instruments — Synoptophores,Instruments ophtalmiques — Synoptophores,1998-04-30,1,['11.040.70'],ISO/TC 172/SC 7,9599,,[52928],"['en','fr']",6
• ISO 10945:199418921,IS,,ISO 10945:1994,Hydraulic fluid power — Gas-loaded accumulators — Dimensions of gas ports,Transmissions hydrauliques — Accumulateurs hydropneumatiques — Dimensions des ori
• ISO 10946:199918922,IS,,ISO 10946:1999,Hydraulic fluid power — Gas-loaded accumulators with separator — Selection of preferred hydraulic ports,Transmissions hydrauliques — Accumulateurs hydropne
• ISO 10952:199926653,IS,,ISO 10952:1999,Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Determination of the resistance to chemical attack from the in
• ISO 10952:200844085,IS,,ISO 10952:2008,Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Determination of the resistance to chemical attack for the ins
• ISO 10952:201463949,IS,,ISO 10952:2014,Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Determination of the resistance to chemical attack for the ins
• ISO 10957:199318931,IS,,ISO 10957:1993,Information and documentation — International standard music number (ISMN),Information et documentation — Numéro international normalisé de la musique (ISM
• ISO 10957:200943173,IS,,ISO 10957:2009,Information and documentation — International standard music number (ISMN),Information et documentation — Numéro international normalisé de la musique (ISM
• ISO 10958-2:199927263,IS,,ISO 10958-2:1999,Snowboards — Binding mounting area — Part 2: Requirements and test methods for snowboards with inserts,Surfs des neiges — Zone de montage de la fixation
• ISO 10958-2:200437795,IS,,ISO 10958-2:2004,Snowboards — Binding mounting area — Part 2: Requirements and test methods for snowboards with inserts,Surfs des neiges — Zone de montage de la fixation
• ISO 10959:200018933,IS,,ISO 10959:2000,Aerospace — MJ threads — Gauging,Aéronautique et espace — Filetage MJ — Vérification par calibres,2000-01-27,1,['49.030.10'],ISO/TC 20/SC 4,9599,,[66320],"
• ISO 10960:199418934,IS,,ISO 10960:1994,Rubber and plastics hoses — Assessment of ozone resistance under dynamic conditions,Tuyaux en caoutchouc et en plastique — Évaluation de la résistance à l'
• ISO 10961:201056856,IS,,ISO 10961:2010,"Gas cylinders — Cylinder bundles — Design, manufacture, testing and inspection","Bouteilles à gaz — Cadres de bouteilles — Conception, fabrication, essais
• ISO 10962:19971636,IS,,ISO 10962:1997,Securities — Classification of Financial Instruments (CFI code),Valeurs mobilières — Classification des instruments financiers (code CFI),1997-01-22,1,['03.
• ISO 10962:1997/Cor 1:199729642,IS,Cor,ISO 10962:1997/Cor 1:1997,Securities — Classification of Financial Instruments (CFI code) — Technical Corrigendum 1,Valeurs mobilières — Classification des instruments
• ISO 10962:200132835,IS,,ISO 10962:2001,Securities and related financial instruments — Classification of Financial Instruments (CFI code),Valeurs mobilières et autres instruments financiers conce
• ISO 10962:201544799,IS,,ISO 10962:2015,Securities and related financial instruments — Classification of financial instruments (CFI code),Valeurs mobilières et autres instruments financiers conce
• ISO 10962:201973564,IS,,ISO 10962:2019,Securities and related financial instruments — Classification of financial instruments (CFI) code,Valeurs mobilières et autres instruments financiers conce
• ISO 10965:199818937,IS,,ISO 10965:1998,Textile floor coverings — Determination of electrical resistance,Revêtements de sol textiles — Détermination de la résistance électrique,1998-11-05,1,['97.
• ISO 10965:1998/Cor 1:199931673,IS,Cor,ISO 10965:1998/Cor 1:1999,Textile floor coverings — Determination of electrical resistance — Technical Corrigendum 1,Revêtements de sol textiles — Détermination de la
• ISO 10966:199418938,IS,,ISO 10966:1994,Textiles — Fabrics for awnings and camping tents — Specification,Textiles — Tissus pour auvents et tentes de camping — Spécifications,1994-06-23,1,"['59.08
• ISO 10966:200535114,IS,,ISO 10966:2005,Sports and recreational equipment — Fabrics for awnings and camping tents — Specification,Matériel de sports et d'activités de plein air — Étoffes pour auv
• ISO 10968:19951908,IS,,ISO 10968:1995,Earth-moving machinery — Operator's controls,Engins de terrassement — Commandes de l'opérateur,1995-09-21,1,['53.100'],ISO/TC 127/SC 2,9599,"[10478,13679]",
• ISO 10968:200431188,IS,,ISO 10968:2004,Earth-moving machinery — Operator's controls,Engins de terrassement — Commandes de l'opérateur,2004-10-07,2,['53.100'],ISO/TC 127/SC 2,9599,[1908],"[66915,
• ISO 10972-1:199818943,IS,,ISO 10972-1:1998,Cranes — Requirements for mechanisms — Part 1: General,Appareils de levage à charge suspendue — Prescriptions pour les mécanismes — Partie 1: Généralités
• ISO 10975:200946481,IS,,ISO 10975:2009,Tractors and machinery for agriculture — Auto-guidance systems for operator-controlled tractors and self-propelled machines — Safety requirements,Tracteurs
• ISO 10976:201246482,IS,,ISO 10976:2012,Refrigerated light hydrocarbon fluids - Measurement of cargoes on board LNG carriers,Hydrocarbures légers réfrigérés — Mesurage des cargaisons à bord des n
• ISO 10976:201568620,IS,,ISO 10976:2015,Refrigerated light hydrocarbon fluids — Measurement of cargoes on board LNG carriers,Hydrocarbures légers réfrigérés — Mesurage des cargaisons à bord des n
• ISO 10977:199318947,IS,,ISO 10977:1993,Photography — Processed photographic colour films and paper prints — Methods for measuring image stability,Photographie — Films et papiers photographiques
• ISO 10979:199418949,IS,,ISO 10979:1994,Identification of fuel assemblies for nuclear power reactors,Système d'identification des assemblages combustibles destinés aux réacteurs nucléaires,1994-0
• ISO 10981:199318950,IS,,ISO 10981:1993,Determination of uranium in reprocessing plants dissolver solution — Liquid chromatography method,Dosage de l'uranium dans les solutions de dissolution des
• ISO 10983:199918952,IS,,ISO 10983:1999,Timber structures — Solid timber finger-jointing — Production requirements,Structures en bois — Aboutages à entures multiples de bois massif — Exigences de
• ISO 10985:199218954,IS,,ISO 10985:1992,Caps made of aluminium-plastics combinations for infusion bottles and injection vials — Requirements and test methods,Capsules en combinaison aluminium-pla
• ISO 10985:199930262,IS,,ISO 10985:1999,Caps made of aluminium-plastics combinations for infusion bottles and injection vials — Requirements and test methods,Capsules en combinaison aluminium-pla
• ISO 10985:200952179,IS,,ISO 10985:2009,Caps made of aluminium-plastics combinations for infusion bottles and injection vials — Requirements and test methods,Capsules en combinaison aluminium-pla
• ISO 10988:201146488,IS,,ISO 10988:2011,Equipment for crop protection — Knapsack motorized air-assisted sprayers — Test methods and performance limits,Matériel de protection des cultures — Pulvér
• ISO 10991:200946546,IS,,ISO 10991:2009,Micro process engineering — Vocabulary,Génie des microprocédés — Vocabulaire,2009-11-10,1,"['01.040.71','71.040.10']",ISO/TC 48,9599,,[82146],"['en','fr']"
• ISO 10993-1:199218960,IS,,ISO 10993-1:1992,Biological evaluation of medical devices — Part 1: Guidance on selection of tests,Évaluation biologique des dispositifs médicaux — Partie 1: Lignes direc
• ISO 10993-1:1992/Cor 1:199221225,IS,Cor,ISO 10993-1:1992/Cor 1:1992,Biological evaluation of medical devices — Part 1: Guidance on selection of tests — Technical Corrigendum 1,Évaluation biologique des dispo
• ISO 10993-1:199725333,IS,,ISO 10993-1:1997,Biological evaluation of medical devices — Part 1: Evaluation and testing,Évaluation biologique des dispositifs médicaux — Partie 1: Évaluation et essais
• ISO 10993-1:200337875,IS,,ISO 10993-1:2003,Biological evaluation of medical devices — Part 1: Evaluation and testing,Évaluation biologique des dispositifs médicaux — Partie 1: Évaluation et essais
• ISO 10993-1:200944908,IS,,ISO 10993-1:2009,Biological evaluation of medical devices — Part 1: Evaluation and testing within a risk management process,Évaluation biologique des dispositifs médicaux
• ISO 10993-1:2009/Cor 1:201056669,IS,Cor,ISO 10993-1:2009/Cor 1:2010,Biological evaluation of medical devices — Part 1: Evaluation and testing within a risk management process — Technical Corrigendum 1,Évalua
• ISO 10993-1:201868936,IS,,ISO 10993-1:2018,Biological evaluation of medical devices — Part 1: Evaluation and testing within a risk management process,Évaluation biologique des dispositifs médicaux
• ISO 10993-2:199218961,IS,,ISO 10993-2:1992,Biological evaluation of medical devices — Part 2: Animal welfare requirements,Évaluation biologique des dispositifs médicaux — Partie 2: Exigences conce
• ISO 10993-2:200636405,IS,,ISO 10993-2:2006,Biological evaluation of medical devices — Part 2: Animal welfare requirements,Évaluation biologique des dispositifs médicaux — Partie 2: Exigences relat
• ISO 10993-3:199218962,IS,,ISO 10993-3:1992,"Biological evaluation of medical devices — Part 3: Tests for genotoxicity, carcinogenicity and reproductive toxicity","Évaluation biologique des disposi
• ISO 10993-3:200332162,IS,,ISO 10993-3:2003,"Biological evaluation of medical devices — Part 3: Tests for genotoxicity, carcinogenicity and reproductive toxicity","Évaluation biologique des disposi
• ISO 10993-3:201455614,IS,,ISO 10993-3:2014,"Biological evaluation of medical devices — Part 3: Tests for genotoxicity, carcinogenicity and reproductive toxicity","Évaluation biologique des disposi
• ISO 10993-4:199218963,IS,,ISO 10993-4:1992,Biological evaluation of medical devices — Part 4: Selection of tests for interactions with blood,Évaluation biologique des dispositifs médicaux — Partie
• ISO 10993-4:200232086,IS,,ISO 10993-4:2002,Biological evaluation of medical devices — Part 4: Selection of tests for interactions with blood,Évaluation biologique des dispositifs médicaux — Partie
• ISO 10993-4:2002/Amd 1:200639205,IS,Amd,ISO 10993-4:2002/Amd 1:2006,Biological evaluation of medical devices — Part 4: Selection of tests for interactions with blood — Amendment 1,Évaluation biologique des d
• ISO 10993-5:199218964,IS,,ISO 10993-5:1992,Biological evaluation of medical devices — Part 5: Tests for cytotoxicity: in vitro methods,Évaluation biologique des dispositifs médicaux — Partie 5: Es
• ISO 10993-5:199926211,IS,,ISO 10993-5:1999,Biological evaluation of medical devices — Part 5: Tests for in vitro cytotoxicity,Évaluation biologique des dispositifs médicaux — Partie 5: Essais conc
• ISO 10993-6:199418966,IS,,ISO 10993-6:1994,Biological evaluation of medical devices — Part 6: Tests for local effects after implantation,Évaluation biologique des dispositifs médicaux — Partie 6:
• ISO 10993-6:200744789,IS,,ISO 10993-6:2007,Biological evaluation of medical devices — Part 6: Tests for local effects after implantation,Évaluation biologique des dispositifs médicaux — Partie 6:
• ISO 10993-6:201661089,IS,,ISO 10993-6:2016,Biological evaluation of medical devices — Part 6: Tests for local effects after implantation,Évaluation biologique des dispositifs médicaux — Partie 6:
• ISO 10993-7:199518967,IS,,ISO 10993-7:1995,Biological evaluation of medical devices — Part 7: Ethylene oxide sterilization residuals,Évaluation biologique des dispositifs médicaux — Partie 7: Rési
• ISO 10993-7:200834213,IS,,ISO 10993-7:2008,Biological evaluation of medical devices — Part 7: Ethylene oxide sterilization residuals,Évaluation biologique des dispositifs médicaux — Partie 7: Rési
• ISO 10993-7:2008/Amd 1:201972766,IS,Amd,ISO 10993-7:2008/Amd 1:2019,Biological evaluation of medical devices — Part 7: Ethylene oxide sterilization residuals — Amendment 1: Applicability of allowable limits
• ISO 10993-7:2008/Cor 1:200955064,IS,Cor,ISO 10993-7:2008/Cor 1:2009,Biological evaluation of medical devices — Part 7: Ethylene oxide sterilization residuals — Technical Corrigendum 1,Évaluation biologique d
• ISO 10993-9:199926212,IS,,ISO 10993-9:1999,Biological evaluation of medical devices — Part 9: Framework for identification and quantification of potential degradation products,Évaluation biologiqu
• ISO 10993-9:200944049,IS,,ISO 10993-9:2009,Biological evaluation of medical devices — Part 9: Framework for identification and quantification of potential degradation products,Évaluation biologiqu
• ISO 10993-10:199518971,IS,,ISO 10993-10:1995,Biological evaluation of medical devices — Part 10: Tests for irritation and sensitization,Évaluation biologique des dispositifs médicaux — Partie 10: E
• ISO 10993-10:200233364,IS,,ISO 10993-10:2002,Biological evaluation of medical devices — Part 10: Tests for irritation and delayed-type hypersensitivity,Évaluation biologique des dispositifs médicau
• ISO 10993-10:2002/Amd 1:200639360,IS,Amd,ISO 10993-10:2002/Amd 1:2006,Biological evaluation of medical devices — Part 10: Tests for irritation and delayed-type hypersensitivity — Amendment 1,Évaluation biolog
• ISO 10993-10:201040884,IS,,ISO 10993-10:2010,Biological evaluation of medical devices — Part 10: Tests for irritation and skin sensitization,Évaluation biologique des dispositifs médicaux — Partie
• ISO 10993-11:199318972,IS,,ISO 10993-11:1993,Biological evaluation of medical devices — Part 11: Tests for systemic toxicity,Évaluation biologique des dispositifs médicaux — Partie 11: Essais de to
• ISO 10993-11:200635977,IS,,ISO 10993-11:2006,Biological evaluation of medical devices — Part 11: Tests for systemic toxicity,Évaluation biologique des dispositifs médicaux — Partie 11: Essais de to
• ISO 10993-12:199618973,IS,,ISO 10993-12:1996,Biological evaluation of medical devices — Part 12: Sample preparation and reference materials,Évaluation biologique des dispositifs médicaux — Partie 1
• ISO 10993-12:200235331,IS,,ISO 10993-12:2002,Biological evaluation of medical devices — Part 12: Sample preparation and reference materials,Évaluation biologique des dispositifs médicaux — Partie 1
• ISO 10993-12:200740384,IS,,ISO 10993-12:2007,Biological evaluation of medical devices — Part 12: Sample preparation and reference materials,Évaluation biologique des dispositifs médicaux — Partie 1
• ISO 10993-12:201253468,IS,,ISO 10993-12:2012,Biological evaluation of medical devices — Part 12: Sample preparation and reference materials,Évaluation biologique des dispositifs médicaux — Partie 1
• ISO 10993-13:199822692,IS,,ISO 10993-13:1998,Biological evaluation of medical devices — Part 13: Identification and quantification of degradation products from polymeric medical devices,Évaluation
• ISO 10993-15:200022694,IS,,ISO 10993-15:2000,Biological evaluation of medical devices — Part 15: Identification and quantification of degradation products from metals and alloys,Évaluation biologiq
• ISO 10993-16:199722695,IS,,ISO 10993-16:1997,Biological evaluation of medical devices — Part 16: Toxicokinetic study design for degradation products and leachables,Évaluation biologique des disposi
• ISO 10993-16:201045367,IS,,ISO 10993-16:2010,Biological evaluation of medical devices — Part 16: Toxicokinetic study design for degradation products and leachables,Évaluation biologique des disposi
• ISO 10993-17:200223955,IS,,ISO 10993-17:2002,Biological evaluation of medical devices — Part 17: Establishment of allowable limits for leachable substances,Évaluation biologique des dispositifs méd
• ISO 10993-18:200541106,IS,,ISO 10993-18:2005,Biological evaluation of medical devices — Part 18: Chemical characterization of materials,Évaluation biologique des dispositifs médicaux — Partie 18: C
• ISO 10998:199518978,IS,,ISO 10998:1995,Agricultural wheeled tractors — Steering requirements,Tracteurs agricoles à roues — Exigences relatives à la conduite,1995-11-23,1,['65.060.10'],ISO/TC 23/
• ISO 11001-1:199318981,IS,,ISO 11001-1:1993,Agricultural wheeled tractors and implements — Three-point hitch couplers — Part 1: U-frame coupler,Tracteurs agricoles à roues et instruments — Coupleur
• ISO 11001-3:199318983,IS,,ISO 11001-3:1993,Agricultural wheeled tractors and implements — Three-point hitch couplers — Part 3: Link coupler,Tracteurs agricoles à roues et instruments — Coupleurs r
• ISO 11003-1:199318986,IS,,ISO 11003-1:1993,Adhesives — Determination of shear behaviour of structural bonds — Part 1: Torsion test method using butt-bonded hollow cylinders,Adhésifs — Déterminatio
• ISO 11003-1:200131289,IS,,ISO 11003-1:2001,Adhesives — Determination of shear behaviour of structural adhesives — Part 1: Torsion test method using butt-bonded hollow cylinders,Adhésifs — Détermin
• ISO 11003-2:199318987,IS,,ISO 11003-2:1993,Adhesives — Determination of shear behaviour of structural bonds — Part 2: Thick-adherend tensile-test method,Adhésifs — Détermination du comportement en
• ISO 11003-2:200130095,IS,,ISO 11003-2:2001,Adhesives — Determination of shear behaviour of structural adhesives — Part 2: Tensile test method using thick adherends,Adhésifs — Détermination du comp
• ISO 11007:199718991,IS,,ISO 11007:1997,Petroleum products and lubricants — Determination of rust-prevention characteristics of lubricating greases,Produits pétroliers et lubrifiants — Déterminat
• ISO 11009:200032504,IS,,ISO 11009:2000,Petroleum products and lubricants — Determination of water washout characteristics of lubricating greases,Produits pétroliers et lubrifiants — Déterminatio
• ISO 11014-1:199418998,IS,,ISO 11014-1:1994,Safety data sheet for chemical products — Part 1: Content and order of sections,Fiches de données de sécurité pour les produits chimiques — Partie 1: Con
• ISO 11027:199319011,IS,,ISO 11027:1993,Pepper and pepper oleoresins — Determination of piperine content — Method using high-performance liquid chromatography,"Poivres, oléorésines de poivres — D
• ISO 11036:199419016,IS,,ISO 11036:1994,Sensory analysis — Methodology — Texture profile,Analyse sensorielle — Méthodologie — Profil de la texture,1994-11-24,1,['67.240'],ISO/TC 34/SC 12,9599,,"[
• ISO 11037:199919017,IS,,ISO 11037:1999,Sensory analysis — General guidance and test method for assessment of the colour of foods,Analyse sensorielle — Directives générales et méthode d'essai pou
• ISO 11040-1:199219020,IS,,ISO 11040-1:1992,Prefilled syringes — Part 1: Glass cylinders for dental local anaesthetic cartridges,Seringues préremplies — Partie 1: Tubes en verre pour cartouches den
• ISO 11040-2:199420099,IS,,ISO 11040-2:1994,Prefilled syringes — Part 2: Plungers and discs for dental local anaesthetic cartridges,Seringues préremplies — Partie 2: Bouchons-pistons et rondelles d
• ISO 11040-3:199319981,IS,,ISO 11040-3:1993,Prefilled syringes — Part 3: Aluminium caps for dental local anaesthetic cartridges,Seringues préremplies — Partie 3: Capsules en aluminium pour cartouch
• ISO 11040-3:201253948,IS,,ISO 11040-3:2012,Prefilled syringes — Part 3: Seals for dental local anaesthetic cartridges,Seringues préremplies — Partie 3: Rondelles d'étanchéité pour cartouches denta
• ISO 11040-4:199621554,IS,,ISO 11040-4:1996,Prefilled syringes — Part 4: Glass barrels for injectables,Seringues préremplies — Partie 4: Cylindres en verre pour produits injectables,1996-04-18,1,['
• ISO 11040-4:200743323,IS,,ISO 11040-4:2007,Prefilled syringes — Part 4: Glass barrels for injectables,Seringues préremplies — Partie 4: Cylindres en verre pour produits injectables,2007-01-15,2,['
• ISO 11040-4:201558079,IS,,ISO 11040-4:2015,Prefilled syringes — Part 4: Glass barrels for injectables and sterilized subassembled syringes ready for filling,Seringues préremplies — Partie 4: Cylin
• ISO 11040-4:2015/Amd 1:202076777,IS,Amd,ISO 11040-4:2015/Amd 1:2020,Prefilled syringes — Part 4: Glass barrels for injectables and sterilized subassembled syringes ready for filling — Amendment 1,Seringues p
• ISO 11040-5:199621555,IS,,ISO 11040-5:1996,Prefilled syringes — Part 5: Plungers for injectables,Seringues préremplies — Partie 5: Bouchons-pistons pour produits injectables,1996-04-18,1,['11.040.
• ISO 11040-5:200133503,IS,,ISO 11040-5:2001,Prefilled syringes — Part 5: Plungers for injectables,Seringues préremplies — Partie 5: Bouchons-pistons pour produits injectables,2001-12-20,2,['11.040.
• ISO 11040-6:201251919,IS,,ISO 11040-6:2012,Prefilled syringes — Part 6: Plastic barrels for injectables,Seringues préremplies — Partie 6: Cylindres en plastique pour produits injectables,2012-03-2
• ISO 11040-7:201559937,IS,,ISO 11040-7:2015,Prefilled syringes — Part 7: Packaging systems for sterilized subassembled syringes ready for filling,Seringues préremplies — Partie 7: Systèmes d'emball
• ISO 11040-8:201666036,IS,,ISO 11040-8:2016,Prefilled syringes — Part 8: Requirements and test methods for finished prefilled syringes,Seringues préremplies — Partie 8: Exigences et méthodes d'essa
• ISO 11050:199319030,IS,,ISO 11050:1993,Wheat flour and durum wheat semolina — Determination of impurities of animal origin,Farines de blé tendre et semoules de blé dur — Détermination des impure
• ISO 11054:199319033,IS,,ISO 11054:1993,Cutting tools — Designation of high-speed steel groups,Outils coupants — Désignation des groupes d'aciers rapides,1993-12-02,1,"['77.140.35','25.100.01']",
• ISO 11056:199932338,IS,,ISO 11056:1999,Sensory analysis — Methodology — Magnitude estimation method,Analyse sensorielle — Méthodologie — Méthode d'estimation de la grandeur,1999-12-16,1,['67.240
• ISO 11056:1999/Amd 1:201358034,IS,Amd,ISO 11056:1999/Amd 1:2013,Sensory analysis — Methodology — Magnitude estimation method — Amendment 1,Analyse sensorielle — Méthodologie — Méthode d'estimation de la g
• ISO 11056:1999/Amd 2:201565520,IS,Amd,ISO 11056:1999/Amd 2:2015,Sensory analysis — Methodology — Magnitude estimation method — Amendment 2,Analyse sensorielle — Méthodologie — Méthode d'estimation de la g
• ISO 11058:199919036,IS,,ISO 11058:1999,"Geotextiles and geotextile-related products — Determination of water permeability characteristics normal to the plane, without load","Géotextiles et produ
• ISO 11058:201054545,IS,,ISO 11058:2010,"Geotextiles and geotextile-related products — Determination of water permeability characteristics normal to the plane, without load","Géotextiles et produ
• ISO 11063:201250025,IS,,ISO 11063:2012,Soil quality — Method to directly extract DNA from soil samples,Qualité du sol — Méthode pour extraire directement l'ADN d'échantillons de sol,2012-02-06,1
• ISO 11064-4:200419045,IS,,ISO 11064-4:2004,Ergonomic design of control centres — Part 4: Layout and dimensions of workstations,Conception ergonomique des centres de commande — Partie 4: Agencement
• ISO 11070:199819052,IS,,ISO 11070:1998,"Sterile, single-use intravascular catheter introducers","Introducteurs de cathéters intravasculaires stériles, non réutilisables",1998-04-30,1,['11.040.25
• ISO 11073-91064:200946493,IS,,ISO 11073-91064:2009,Health informatics — Standard communication protocol — Part 91064: Computer-assisted electrocardiography,Informatique de santé — Communication entre
• ISO 11074-1:199619061,IS,,ISO 11074-1:1996,Soil quality — Vocabulary — Part 1: Terms and definitions relating to the protection and pollution of the soil,Qualité du sol — Vocabulaire — Partie 1: T
• ISO 11074-2:199819062,IS,,ISO 11074-2:1998,Soil quality — Vocabulary — Part 2: Terms and definitions relating to sampling,Qualité du sol — Vocabulaire — Partie 2: Termes et définitions relatifs à
• ISO 11074-4:199926399,IS,,ISO 11074-4:1999,Soil quality - Vocabulary — Part 4: Terms and definitions related to rehabilitation of soils and sites,Qualité du sol - Vocabulaire — Partie 4: Termes et
• ISO 11074:200538529,IS,,ISO 11074:2005,Soil quality — Vocabulary,Qualité du sol — Vocabulaire,2005-10-27,1,"['01.040.13','13.080.01']",ISO/TC 190,9599,"[26399,19061,19062]",[59259],"['en','fr']"
• ISO 11074:2005/Cor 1:200644804,IS,Cor,ISO 11074:2005/Cor 1:2006,Soil quality — Vocabulary — Technical Corrigendum 1,Qualité du sol — Vocabulaire — Rectificatif technique 1,2006-09-19,1,"['01.040.13','13.08
• ISO 11074:201559259,IS,,ISO 11074:2015,Soil quality — Vocabulary,Qualité du sol — Vocabulaire,2015-05-08,2,"['01.040.13','13.080.01']",ISO/TC 190,9599,"[38529,44804]",[83168],"['de','en','fr']",
• ISO 11074:2015/Amd 1:202074731,IS,Amd,ISO 11074:2015/Amd 1:2020,Soil quality — Vocabulary — Amendment 1,Qualité du sol — Vocabulaire — Amendement 1,2020-02-07,2,"['01.040.13','13.080.01']",ISO/TC 190,9599,
• ISO 11075:199319063,IS,,ISO 11075:1993,"Aerospace — Aircraft de-icing/anti-icing Newtonian fluids, ISO type I",Aéronautique et espace — Liquides newtoniens ISO type I de dégivrage/antigivrage de
• ISO 11076:199319064,IS,,ISO 11076:1993,Aerospace — Aircraft de-icing/anti-icing methods with fluids,Aéronautique et espace — Méthodes de dégivrage/antigivrage des aéronefs à l'aide de liquides,1
• ISO 11076:200034741,IS,,ISO 11076:2000,Aerospace — Aircraft de-icing/anti-icing methods with fluids,Aéronautique et espace — Méthodes de dégivrage et d'antigivrage des aéronefs à l'aide de liqui
• ISO 11076:200643045,IS,,ISO 11076:2006,Aircraft — Ground-based de-icing/anti-icing methods with fluids,Aéronefs — Méthodes de dégivrage/d'antigivrage au sol à l'aide de liquides,2006-11-13,4,['4
• ISO 11076:201254925,IS,,ISO 11076:2012,Aircraft — De-icing/anti-icing methods on the ground,Aéronefs — Méthodes de dégivrage et d'anti-givrage au sol,2012-11-05,5,['49.100'],ISO/TC 20/SC 9,9599,
• ISO 11077:199319065,IS,,ISO 11077:1993,Aerospace — Self-propelled de-icing/anti-icing vehicles — Functional requirements,Aéronautique et espace — Véhicules automoteurs de dégivrage/antigivrage d
• ISO 11078:199419066,IS,,ISO 11078:1994,"Aerospace — Aircraft de-icing/anti-icing non-Newtonian fluids, ISO type II",Aéronautique et espace — Liquides non newtoniens ISO type II de dégivrage/anti
• ISO 11083:199419070,IS,,ISO 11083:1994,"Water quality — Determination of chromium(VI) — Spectrometric method using 1,5-diphenylcarbazide","Qualité de l'eau — Dosage du chrome(VI) — Méthode par s
• ISO 11085:200838428,IS,,ISO 11085:2008,"Cereals, cereals-based products and animal feeding stuffs — Determination of crude fat and total fat content by the Randall extraction method","Céréales,
• ISO 11087:199719074,IS,,ISO 11087:1997,Alpine ski-bindings — Retention devices — Safety requirements and test methods,Fixations de skis alpins — Dispositifs de retenue — Exigences de sécurité et
• ISO 11087:200437583,IS,,ISO 11087:2004,Alpine ski-bindings — Retention devices — Requirements and test methods,Fixations de skis alpins — Dispositifs de retenue — Exigences et méthodes d'essai,2
• ISO 11088:199319075,IS,,ISO 11088:1993,"Assembly, adjustment and inspection of an alpine ski-binding-boot (S-B-B) system","Montage, réglage et contrôle d'un ensemble ski-fixation-chaussure (SFC)
• ISO 11088:199824479,IS,,ISO 11088:1998,"Assembly, adjustment and inspection of an alpine ski/binding/boot (S-B-B) system","Montage, réglage et contrôle d'un ensemble ski/fixation/chaussure (SFC)
• ISO 11088:200436249,IS,,ISO 11088:2004,"Assembly, adjustment and inspection of an alpine ski/binding/boot (S-B-B) system","Montage, réglage et contrôle d'un ensemble ski/fixation/chaussure (SFC)
• ISO 11088:200644398,IS,,ISO 11088:2006,"Assembly, adjustment and inspection of an alpine ski/binding/boot (S-B-B) system","Montage, réglage et contrôle d'un ensemble ski/fixation/chaussure (SFC)
• ISO 11088:2006/Amd 1:201257223,IS,Amd,ISO 11088:2006/Amd 1:2012,"Assembly, adjustment and inspection of an alpine ski/binding/boot (S-B-B) system — Amendment 1","Montage, réglage et contrôle d'un ensemble
• ISO 11088:201568520,IS,,ISO 11088:2015,"Assembly, adjustment and inspection of an alpine ski/binding/boot (S-B-B) system","Montage, réglage et contrôle d'un ensemble ski/fixation/chaussure (SFC)
• ISO 11088:201871932,IS,,ISO 11088:2018,"Alpine ski/binding/boot (S-B-B) system — Assembly, adjustment and inspection","Ensemble ski/fixation/chaussure (SFC) pour skis alpins — Montage, réglage e
• ISO 11089:199719076,IS,,ISO 11089:1997,"Rubber, raw synthetic — Determination of anti-degradants by high-performance liquid chromatography",Caoutchouc synthétique brut — Détermination des agents
• ISO 11090-1:199819077,IS,,ISO 11090-1:1998,Machine tools — Test conditions for die sinking electro-discharge machines (EDM) — Terminology and testing of accuracy — Part 1: Single column machines (
• ISO 11090-2:199819078,IS,,ISO 11090-2:1998,Machine tools — Test conditions for die sinking electro-discharge machines (EDM) — Terminology and testing of accuracy — Part 2: Two column machines (sli
• ISO 11092:199319081,IS,,ISO 11092:1993,Textiles — Physiological effects — Measurement of thermal and water-vapour resistance under steady-state conditions (sweating guarded-hotplate test),Textil
• ISO 11092:1993/Amd 1:201252228,IS,Amd,ISO 11092:1993/Amd 1:2012,Textiles — Physiological effects — Measurement of thermal and water-vapour resistance under steady-state conditions (sweating guarded-hotplat
• ISO 11092:201465962,IS,,ISO 11092:2014,Textiles — Physiological effects — Measurement of thermal and water-vapour resistance under steady-state conditions (sweating guarded-hotplate test),Textil
• ISO 11093-2:19941655,IS,,ISO 11093-2:1994,Paper and board — Testing of cores — Part 2: Conditioning of test samples,Papier et carton — Essais des mandrins — Partie 2: Conditionnement des échantill
• ISO 11093-4:19971565,IS,,ISO 11093-4:1997,Paper and board — Testing of cores — Part 4: Measurement of dimensions,Papier et carton — Essais des mandrins — Partie 4: Mesurage des dimensions,1997-06-
• ISO 11093-4:201665180,IS,,ISO 11093-4:2016,Paper and board — Testing of cores — Part 4: Measurement of dimensions,Papier et carton — Essais des mandrins — Partie 4: Mesurage des dimensions,2016-05
• ISO 11093-5:19941376,IS,,ISO 11093-5:1994,Paper and board — Testing of cores — Part 5: Determination of characteristics of concentric rotation,Papier et carton — Essais des mandrins — Partie 5: Dé
• ISO 11093-5:200950642,IS,,ISO 11093-5:2009,Paper and board — Testing of cores — Part 5: Determination of characteristics of concentric rotation,Papier et carton — Essais des mandrins — Partie 5: D
• ISO 11093-5:2009/Cor 1:201056209,IS,Cor,ISO 11093-5:2009/Cor 1:2010,Paper and board — Testing of cores — Part 5: Determination of characteristics of concentric rotation — Technical Corrigendum 1,Papier et ca
• ISO 11093-6:199622010,IS,,ISO 11093-6:1996,Paper and board — Testing of cores — Part 6: Determination of bending strength by the three-point method,Papier et carton — Essais des mandrins — Partie
• ISO 11093-7:199722011,IS,,ISO 11093-7:1997,Paper and board — Testing of cores — Part 7: Determination of flexural modulus by the three-point method,Papier et carton — Essais des mandrins — Partie
• ISO 11093-8:19971529,IS,,ISO 11093-8:1997,Paper and board — Testing of cores — Part 8: Determination of natural frequency and flexural modulus by experimental modal analysis,Papier et carton — Ess
• ISO 11093-8:201256120,IS,,ISO 11093-8:2012,Paper and board — Testing of cores — Part 8: Determination of natural frequency and flexural modulus by experimental modal analysis,Papier et carton — Es
• ISO 11093-8:2012/Cor 1:201363345,IS,Cor,ISO 11093-8:2012/Cor 1:2013,Paper and board — Testing of cores — Part 8: Determination of natural frequency and flexural modulus by experimental modal analysis — Techn
• ISO 11093-9:19941619,IS,,ISO 11093-9:1994,Paper and board — Testing of cores — Part 9: Determination of flat crush resistance,Papier et carton — Essais des mandrins — Partie 9: Détermination de la
• ISO 11093-9:200637418,IS,,ISO 11093-9:2006,Paper and board — Testing of cores — Part 9: Determination of flat crush resistance,Papier et carton — Essais des mandrins — Partie 9: Détermination de l
• ISO 11094:199119083,IS,,ISO 11094:1991,"Acoustics — Test code for the measurement of airborne noise emitted by power lawn mowers, lawn tractors, lawn and garden tractors, professional mowers, an
• ISO 11096:200234972,IS,,ISO 11096:2002,"Road vehicles — Pedestrian protection — Impact test method for pedestrian thigh, leg and knee","Véhicules routiers — Protection des piétons — Méthode d'es
• ISO 11102-1:199719090,IS,,ISO 11102-1:1997,Reciprocating internal combustion engines — Handle starting equipment — Part 1: Safety requirements and tests,Moteurs alternatifs à combustion interne —
• ISO 11104:199119093,IS,,ISO 11104:1991,Space data and information transfer systems — Time code formats,Systèmes de transfert des informations et données spatiales — Formats des codes horaires,19
• ISO 11104:200338141,IS,,ISO 11104:2003,Space data and information transfer systems — Time code formats,Systèmes de transfert des informations et données spatiales — Formats des codes horaires,20
• ISO 11105:199519094,IS,,ISO 11105:1995,Small craft — Ventilation of petrol engine and/or petrol tank compartments,Navires de plaisance — Ventilation des compartiments moteur à essence et/ou rése
• ISO 11105:199726651,IS,,ISO 11105:1997,Small craft — Ventilation of petrol engine and/or petrol tank compartments,Navires de plaisance — Ventilation des compartiments moteur à essence et/ou rése
• ISO 11108:19961708,IS,,ISO 11108:1996,Information and documentation — Archival paper — Requirements for permanence and durability,Information et documentation — Papier pour documents d'archives
• ISO 11110:199719097,IS,,ISO 11110:1997,Winter-sports equipment — Test devices for the setting of the functional unit ski/boot/binding — Requirements and tests,Matériel de sports d'hiver — Dispos
• ISO 11111-1:200529933,IS,,ISO 11111-1:2005,Textile machinery — Safety requirements — Part 1: Common requirements,Matériel pour l'industrie textile — Exigences de sécurité — Partie 1: Exigences com
• ISO 11111-1:200954091,IS,,ISO 11111-1:2009,Textile machinery — Safety requirements — Part 1: Common requirements,Matériel pour l'industrie textile — Exigences de sécurité — Partie 1: Exigences com
• ISO 11111:19951501,IS,,ISO 11111:1995,Safety requirements for textile machinery,Exigences de sécurité pour le matériel textile,1995-09-28,1,['59.120.01'],ISO/TC 72/SC 8,9599,,"[29946,29935,29936
• ISO 11113:199519098,IS,,ISO 11113:1995,Cylinders for liquefied gases (excluding acetylene and LPG) — Inspection at time of filling,Bouteilles à gaz liquéfiés (à l'exception de l'acétylène et du
• ISO 11114-1:199719099,IS,,ISO 11114-1:1997,Transportable gas cylinders — Compatibility of cylinder and valve materials with gas contents — Part 1: Metallic materials,Bouteilles à gaz transportable
• ISO 11114-1:201250504,IS,,ISO 11114-1:2012,Gas cylinders — Compatibility of cylinder and valve materials with gas contents — Part 1: Metallic materials,Bouteilles à gaz — Compatibilité des matéria
• ISO 11114-1:2012/Amd 1:201764586,IS,Amd,ISO 11114-1:2012/Amd 1:2017,Gas cylinders — Compatibility of cylinder and valve materials with gas contents — Part 1: Metallic materials — Amendment 1,Bouteilles à gaz
• ISO 11114-2:200033320,IS,,ISO 11114-2:2000,Transportable gas cylinders — Compatibility of cylinder and valve materials with gas contents — Part 2: Non-metallic materials,Bouteilles à gaz transport
• ISO 11114-2:201350505,IS,,ISO 11114-2:2013,Gas cylinders — Compatibility of cylinder and valve materials with gas contents — Part 2: Non-metallic materials,Bouteilles à gaz — Compatibilité des mat
• ISO 11114-3:199719101,IS,,ISO 11114-3:1997,Transportable gas cylinders — Compatibility of cylinder and valve materials with gas contents — Part 3: Autogenous ignition test in oxygen atmosphere,Bou
• ISO 11114-4:200541281,IS,,ISO 11114-4:2005,Transportable gas cylinders — Compatibility of cylinder and valve materials with gas contents — Part 4: Test methods for selecting metallic materials res
• ISO 11116-1:199919103,IS,,ISO 11116-1:1999,Gas cylinders — 17E taper thread for connection of valves to gas cylinders — Part 1: Specifications,Bouteilles à gaz — Filetage conique 17E pour le racco
• ISO 11116-2:199919208,IS,,ISO 11116-2:1999,Gas cylinders — 17E taper thread for connection of valves to gas cylinders — Part 2: Inspection gauges,Bouteilles à gaz — Filetage conique 17E pour le ra
• ISO 11117:199819104,IS,,ISO 11117:1998,"Gas cylinders — Valve protection caps and valve guards for industrial and medical gas cylinders — Design, construction and tests","Bouteilles à gaz — Chap
• ISO 11117:200837772,IS,,ISO 11117:2008,"Gas cylinders — Valve protection caps and valve guards — Design, construction and tests","Bouteilles à gaz — Chapeaux fermés et chapeaux ouverts de protec
• ISO 11117:2008/Cor 1:200954096,IS,Cor,ISO 11117:2008/Cor 1:2009,"Gas cylinders — Valve protection caps and valve guards — Design, construction and tests — Technical Corrigendum 1","Bouteilles à gaz — Chape
• ISO 11118:199919105,IS,,ISO 11118:1999,Gas cylinders — Non-refillable metallic gas cylinders — Specification and test methods,Bouteilles à gaz — Bouteilles à gaz métalliques non rechargeables —
• ISO 11118:201545767,IS,,ISO 11118:2015,Gas cylinders — Non-refillable metallic gas cylinders — Specification and test methods,Bouteilles à gaz — Bouteilles à gaz métalliques non rechargeables —
• ISO 11118:2015/Amd 1:201975533,IS,Amd,ISO 11118:2015/Amd 1:2019,Gas cylinders — Non-refillable metallic gas cylinders — Specification and test methods — Amendment 1,Bouteilles à gaz — Bouteilles à gaz méta
• ISO 11119-1:200232872,IS,,ISO 11119-1:2002,Gas cylinders of composite construction — Specification and test methods — Part 1: Hoop wrapped composite gas cylinders,Bouteilles à gaz composites — Spé
• ISO 11119-1:201250555,IS,,ISO 11119-1:2012,"Gas cylinders — Refillable composite gas cylinders and tubes — Design, construction and testing — Part 1: Hoop wrapped fibre reinforced composite gas cy
• ISO 11119-2:200235680,IS,,ISO 11119-2:2002,Gas cylinders of composite construction — Specification and test methods — Part 2: Fully wrapped fibre reinforced composite gas cylinders with load-shari
• ISO 11119-2:201243590,IS,,ISO 11119-2:2012,"Gas cylinders — Refillable composite gas cylinders and tubes — Design, construction and testing — Part 2: Fully wrapped fibre reinforced composite gas c
• ISO 11119-2:2012/Amd 1:201463327,IS,Amd,ISO 11119-2:2012/Amd 1:2014,"Gas cylinders — Refillable composite gas cylinders and tubes — Design, construction and testing — Part 2: Fully wrapped fibre reinforced c
• ISO 11119-3:200227623,IS,,ISO 11119-3:2002,Gas cylinders of composite construction — Specification and test methods — Part 3: Fully wrapped fibre reinforced composite gas cylinders with non-load-s
• ISO 11119-3:201350523,IS,,ISO 11119-3:2013,"Gas cylinders — Refillable composite gas cylinders and tubes — Design, construction and testing — Part 3: Fully wrapped fibre reinforced composite gas c
• ISO 11120:199919107,IS,,ISO 11120:1999,"Gas cylinders — Refillable seamless steel tubes for compressed gas transport, of water capacity between 150 l and 3000 l — Design construction and testing
• ISO 11120:1999/Amd 1:201357321,IS,Amd,ISO 11120:1999/Amd 1:2013,"Gas cylinders — Refillable seamless steel tubes for compressed gas transport, of water capacity between 150 l and 3000 l — Design constructi
• ISO 11121:200950109,IS,,ISO 11121:2009,Recreational diving services — Requirements for introductory training programmes to scuba diving,Services relatifs à la plongée de loisirs — Exigences pour
• ISO 11124-1:199319110,IS,,ISO 11124-1:1993,Preparation of steel substrates before application of paints and related products — Specifications for metallic blast-cleaning abrasives — Part 1: Genera
• ISO 11124-1:201866704,IS,,ISO 11124-1:2018,Preparation of steel substrates before application of paints and related products — Specifications for metallic blast-cleaning abrasives — Part 1: Genera
• ISO 11124-2:199319111,IS,,ISO 11124-2:1993,Preparation of steel substrates before application of paints and related products — Specifications for metallic blast-cleaning abrasives — Part 2: Chille
• ISO 11124-3:199319112,IS,,ISO 11124-3:1993,Preparation of steel substrates before application of paints and related products — Specifications for metallic blast-cleaning abrasives — Part 3: High-c
• ISO 11124-4:199319113,IS,,ISO 11124-4:1993,Preparation of steel substrates before application of paints and related products — Specifications for metallic blast-cleaning abrasives — Part 4: Low-ca
• ISO 11125-1:199319115,IS,,ISO 11125-1:1993,Preparation of steel substrates before application of paints and related products — Test methods for metallic blast-cleaning abrasives — Part 1: Sampling
• ISO 11125-2:199319116,IS,,ISO 11125-2:1993,Preparation of steel substrates before application of paints and related products — Test methods for metallic blast-cleaning abrasives — Part 2: Determin
• ISO 11125-3:199319117,IS,,ISO 11125-3:1993,Preparation of steel substrates before application of paints and related products — Test methods for metallic blast-cleaning abrasives — Part 3: Determin
• ISO 11125-4:199319118,IS,,ISO 11125-4:1993,Preparation of steel substrates before application of paints and related products — Test methods for metallic blast-cleaning abrasives — Part 4: Determin
• ISO 11125-5:199319119,IS,,ISO 11125-5:1993,Preparation of steel substrates before application of paints and related products — Test methods for metallic blast-cleaning abrasives — Part 5: Determin
• ISO 11125-5:201866701,IS,,ISO 11125-5:2018,Preparation of steel substrates before application of paints and related products — Test methods for metallic blast-cleaning abrasives — Part 5: Determin
• ISO 11125-6:199319120,IS,,ISO 11125-6:1993,Preparation of steel substrates before application of paints and related products — Test methods for metallic blast-cleaning abrasives — Part 6: Determin
• ISO 11125-7:199319121,IS,,ISO 11125-7:1993,Preparation of steel substrates before application of paints and related products — Test methods for metallic blast-cleaning abrasives — Part 7: Determin
• ISO 11126-1:199319125,IS,,ISO 11126-1:1993,Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 1: Ge
• ISO 11126-1:1993/Cor 1:199728334,IS,Cor,ISO 11126-1:1993/Cor 1:1997,Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-cleaning abrasive
• ISO 11126-1:1993/Cor 2:199728993,IS,Cor,ISO 11126-1:1993/Cor 2:1997,Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-cleaning abrasive
• ISO 11126-1:201866708,IS,,ISO 11126-1:2018,Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 1: Ge
• ISO 11126-3:199319127,IS,,ISO 11126-3:1993,Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 3: Co
• ISO 11126-4:199319128,IS,,ISO 11126-4:1993,Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 4: Co
• ISO 11126-5:199319129,IS,,ISO 11126-5:1993,Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 5: Ni
• ISO 11126-6:199319130,IS,,ISO 11126-6:1993,Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 6: Ir
• ISO 11126-7:199519131,IS,,ISO 11126-7:1995,Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 7: Fu
• ISO 11126-7:1995/Cor 1:199931675,IS,Cor,ISO 11126-7:1995/Cor 1:1999,Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-cleaning abrasive
• ISO 11126-8:199319132,IS,,ISO 11126-8:1993,Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 8: Ol
• ISO 11126-10:200019135,IS,,ISO 11126-10:2000,Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 10:
• ISO 11126-10:201765967,IS,,ISO 11126-10:2017,Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 10:
• ISO 11127-1:199319137,IS,,ISO 11127-1:1993,Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 1: Samp
• ISO 11127-1:201152003,IS,,ISO 11127-1:2011,Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 1: Samp
• ISO 11127-2:199319138,IS,,ISO 11127-2:1993,Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 2: Dete
• ISO 11127-2:201152004,IS,,ISO 11127-2:2011,Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 2: Dete
• ISO 11127-3:199319139,IS,,ISO 11127-3:1993,Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 3: Dete
• ISO 11127-3:201152005,IS,,ISO 11127-3:2011,Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 3: Dete
• ISO 11127-4:199319141,IS,,ISO 11127-4:1993,Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 4: Asse
• ISO 11127-4:201152006,IS,,ISO 11127-4:2011,Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 4: Asse
• ISO 11127-5:199319142,IS,,ISO 11127-5:1993,Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 5: Dete
• ISO 11127-5:201152007,IS,,ISO 11127-5:2011,Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 5: Dete
• ISO 11127-6:199319143,IS,,ISO 11127-6:1993,Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 6: Dete
• ISO 11127-6:201152008,IS,,ISO 11127-6:2011,Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 6: Dete
• ISO 11127-7:199319144,IS,,ISO 11127-7:1993,Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 7: Dete
• ISO 11127-7:201152009,IS,,ISO 11127-7:2011,Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 7: Dete
• ISO 11130:199919149,IS,,ISO 11130:1999,Corrosion of metals and alloys — Alternate immersion test in salt solution,Corrosion des métaux et alliages — Essai en immersions alternées en solution sal
• ISO 11130:201050380,IS,,ISO 11130:2010,Corrosion of metals and alloys — Alternate immersion test in salt solution,Corrosion des métaux et alliages — Essai en immersions alternées en solution sal
• ISO 11132:201250124,IS,,ISO 11132:2012,Sensory analysis — Methodology — Guidelines for monitoring the performance of a quantitative sensory panel,Analyse sensorielle — Méthodologie — Lignes dire
• ISO 11134:199419153,IS,,ISO 11134:1994,Sterilization of health care products — Requirements for validation and routine control — Industrial moist heat sterilization,Stérilisation des produits de
• ISO 11135-1:200743185,IS,,ISO 11135-1:2007,"Sterilization of health care products — Ethylene oxide — Part 1: Requirements for development, validation and routine control of a sterilization process
• ISO 11135:199419154,IS,,ISO 11135:1994,Medical devices — Validation and routine control of ethylene oxide sterilization,Dispositifs médicaux — Validation et contrôle de routine de la stérilisati
• ISO 11135:1994/Cor 1:199424811,IS,Cor,ISO 11135:1994/Cor 1:1994,Medical devices — Validation and routine control of ethylene oxide sterilization — Technical Corrigendum 1,Dispositifs médicaux — Validation
• ISO 11137-1:200633952,IS,,ISO 11137-1:2006,"Sterilization of health care products — Radiation — Part 1: Requirements for development, validation and routine control of a sterilization process for
• ISO 11137-1:2006/Amd 1:201360165,IS,Amd,ISO 11137-1:2006/Amd 1:2013,"Sterilization of health care products — Radiation — Part 1: Requirements for development, validation and routine control of a sterilizatio
• ISO 11137-1:2006/Amd 2:201872106,IS,Amd,ISO 11137-1:2006/Amd 2:2018,"Sterilization of health care products — Radiation — Part 1: Requirements for development, validation and routine control of a sterilizatio
• ISO 11137-2:200633953,IS,,ISO 11137-2:2006,Sterilization of health care products — Radiation — Part 2: Establishing the sterilization dose,Stérilisation des produits de santé — Irradiation — Parti
• ISO 11137-2:2006/Cor 1:200953572,IS,Cor,ISO 11137-2:2006/Cor 1:2009,Sterilization of health care products — Radiation — Part 2: Establishing the sterilization dose — Technical Corrigendum 1,Stérilisation des
• ISO 11137-2:201251238,IS,,ISO 11137-2:2012,Sterilization of health care products — Radiation — Part 2: Establishing the sterilization dose,Stérilisation des produits de santé — Irradiation — Parti
• ISO 11137-3:200633955,IS,,ISO 11137-3:2006,Sterilization of health care products — Radiation — Part 3: Guidance on dosimetric aspects,Stérilisation des produits de santé — Irradiation — Partie 3:
• ISO 11137:199519156,IS,,ISO 11137:1995,Sterilization of health care products — Requirements for validation and routine control — Radiation sterilization,Stérilisation des dispositifs médicaux —
• ISO 11137:1995/Amd 1:200133832,IS,Amd,ISO 11137:1995/Amd 1:2001,Sterilization of health care products — Requirements for validation and routine control — Radiation sterilization — Amendment 1: Selection of
• ISO 11137:1995/Cor 1:199728900,IS,Cor,ISO 11137:1995/Cor 1:1997,Sterilization of health care products — Requirements for validation and routine control — Radiation sterilization — Technical Corrigendum 1,S
• ISO 11138-1:199419157,IS,,ISO 11138-1:1994,Sterilization of health care products — Biological indicators — Part 1: General,Stérilisation des produits de santé — Indicateurs biologiques — Partie 1:
• ISO 11138-1:200633956,IS,,ISO 11138-1:2006,Sterilization of health care products — Biological indicators — Part 1: General requirements,Stérilisation des produits de santé — Indicateurs biologique
• ISO 11138-2:199420530,IS,,ISO 11138-2:1994,Sterilization of health care products — Biological indicators — Part 2: Biological indicators for ethylene oxide sterilization,Stérilisation des produits
• ISO 11138-2:200633957,IS,,ISO 11138-2:2006,Sterilization of health care products — Biological indicators — Part 2: Biological indicators for ethylene oxide sterilization processes,Stérilisation de
• ISO 11138-3:199520532,IS,,ISO 11138-3:1995,Sterilization of health care products — Biological indicators — Part 3: Biological indicators for moist heat sterilization,Stérilisation des produits de
• ISO 11138-3:200633958,IS,,ISO 11138-3:2006,Sterilization of health care products — Biological indicators — Part 3: Biological indicators for moist heat sterilization processes,Stérilisation des pr
• ISO 11138-4:200633961,IS,,ISO 11138-4:2006,Sterilization of health care products — Biological indicators — Part 4: Biological indicators for dry heat sterilization processes,Stérilisation des prod
• ISO 11138-5:200633960,IS,,ISO 11138-5:2006,Sterilization of health care products — Biological indicators — Part 5: Biological indicators for low-temperature steam and formaldehyde sterilization pr
• ISO 11140-1:199519159,IS,,ISO 11140-1:1995,Sterilization of health care products — Chemical indicators — Part 1: General requirements,Stérilisation des produits de santé — Indicateurs chimiques —
• ISO 11140-1:1995/Amd 1:199828814,IS,Amd,ISO 11140-1:1995/Amd 1:1998,Sterilization of health care products — Chemical indicators — Part 1: General requirements — Amendment 1,Stérilisation des produits de sant
• ISO 11140-1:200535046,IS,,ISO 11140-1:2005,Sterilization of health care products — Chemical indicators — Part 1: General requirements,Stérilisation des produits de santé — Indicateurs chimiques —
• ISO 11140-2:199821775,IS,,ISO 11140-2:1998,Sterilization of health care products — Chemical indicators — Part 2: Test equipment and methods,Stérilisation des produits de santé — Indicateurs chimiq
• ISO 11140-3:200033750,IS,,ISO 11140-3:2000,Sterilization of health care products — Chemical indicators — Part 3: Class 2 indicators for steam penetration test sheets,Stérilisation des produits de
• ISO 11140-4:200133765,IS,,ISO 11140-4:2001,Sterilization of health care products — Chemical indicators — Part 4: Class 2 indicators for steam penetration test packs,Stérilisation des produits de s
• ISO 11140-5:200026035,IS,,ISO 11140-5:2000,Sterilization of health care products — Chemical indicators — Part 5: Class 2 indicators for air removal test sheets and packs,Stérilisation des produits
• ISO 11143:199919162,IS,,ISO 11143:1999,Dental equipment — Amalgam separators,Matériel dentaire — Séparateurs d'amalgame,1999-12-02,1,['11.060.20'],ISO/TC 106/SC 6,9599,,[42288],"['en','fr']",23
• ISO 11143:1999/Cor 1:200236957,IS,Cor,ISO 11143:1999/Cor 1:2002,Dental equipment — Amalgam separators — Technical Corrigendum 1,Matériel dentaire — Séparateurs d'amalgame — Rectificatif technique 1,2002-06
• ISO 11144:199519163,IS,,ISO 11144:1995,Dental equipment — Connections for supply and waste lines,Matériel dentaire — Raccordements pour lignes d'alimentation et d'évacuation,1995-04-27,1,"['13.0
• ISO 11145:19942476,IS,,ISO 11145:1994,Optics and optical instruments — Lasers and laser-related equipment — Vocabulary and symbols,Optique et instruments d'optique — Lasers et équipements associ
• ISO 11145:200128732,IS,,ISO 11145:2001,Optics and optical instruments — Lasers and laser-related equipment — Vocabulary and symbols,Optique et instruments d'optique — Lasers et équipements assoc
• ISO 11145:200643006,IS,,ISO 11145:2006,Optics and photonics — Lasers and laser-related equipment — Vocabulary and symbols,Optique et photonique — Lasers et équipements associés aux lasers — Voca
• ISO 11145:201665247,IS,,ISO 11145:2016,Optics and photonics — Lasers and laser-related equipment — Vocabulary and symbols,Optique et photonique — Lasers et équipements associés aux lasers — Voca
• ISO 11145:201872944,IS,,ISO 11145:2018,Optics and photonics — Lasers and laser-related equipment — Vocabulary and symbols,Optique et photonique — Lasers et équipements associés aux lasers — Voca
• ISO 11146-1:200533625,IS,,ISO 11146-1:2005,"Lasers and laser-related equipment — Test methods for laser beam widths, divergence angles and beam propagation ratios — Part 1: Stigmatic and simple as
• ISO 11146-2:200533626,IS,,ISO 11146-2:2005,"Lasers and laser-related equipment — Test methods for laser beam widths, divergence angles and beam propagation ratios — Part 2: General astigmatic beam
• ISO 11146:19992519,IS,,ISO 11146:1999,"Lasers and laser-related equipment — Test methods for laser beam parameters — Beam widths, divergence angle and beam propagation factor","Lasers et équipem
• ISO 11148-3:201050132,IS,,ISO 11148-3:2010,Hand-held non-electric power tools — Safety requirements — Part 3: Drills and tappers,Machines portatives à moteur non électrique — Exigences de sécurité
• ISO 11148-4:201050133,IS,,ISO 11148-4:2010,Hand-held non-electric power tools — Safety requirements — Part 4: Non-rotary percussive power tools,Machines portatives à moteur non électrique — Exigen

← records 12,401–12,800 · All of Withdrawn and superseded ISO standards · records 13,201 on →