Records 2,801–3,200 — Withdrawn and superseded ISO standards

Records 2,801 to 3,200 of 24,640. Each links to its own page, which carries the source URL and the quoted line that states the value.

• ISO 2303:200329382,IS,,ISO 2303:2003,"Isoprene rubber (IR) — Non-oil-extended, solution-polymerized types — Evaluation procedure",Caoutchouc isoprène (IR) — Types polymérisés en solution et non
• ISO 2303:201152995,IS,,ISO 2303:2011,"Isoprene rubber (IR) — Non-oil-extended, solution-polymerized types — Evaluation procedures",Caoutchouc isoprène (IR) — Types polymérisés en solution et no
• ISO 2307:19727136,IS,,ISO 2307:1972,Ropes — Determination of certain physical and mechanical properties,Cordages — Détermination de certaines caractéristiques physiques et mécaniques,1972-11-01
• ISO 2307:1972/Amd 1:19747138,IS,Amd,ISO 2307:1972/Amd 1:1974,Ropes — Determination of certain physical and mechanical properties — Amendment 1,Cordages — Détermination de certaines caractéristiques physiq
• ISO 2307:19907137,IS,,ISO 2307:1990,Ropes — Determination of certain physical and mechanical properties,Cordages — Détermination de certaines caractéristiques physiques et mécaniques,1990-09-13
• ISO 2307:200536586,IS,,ISO 2307:2005,Fibre ropes — Determination of certain physical and mechanical properties,Cordages en fibres — Détermination de certaines caractéristiques physiques et méca
• ISO 2307:201052347,IS,,ISO 2307:2010,Fibre ropes — Determination of certain physical and mechanical properties,Cordages en fibres — Détermination de certaines caractéristiques physiques et méca
• ISO 2309:19807141,IS,,ISO 2309:1980,Coke — Sampling,Coke — Échantillonnage,1980-02-01,2,['75.160.10'],ISO/TC 27/SC 4,9599,,[31776],"['en','fr']",23
• ISO 2311:19727142,IS,,ISO 2311:1972,Electrolytic cathode copper,Cathodes en cuivre électrolytique,1972-10-01,1,['77.120.30'],ISO/TC 26,9599,,[4442],['en'],2
• ISO 2313:19727144,IS,,ISO 2313:1972,Textiles — Determination of the recovery from creasing of a horizontally folded specimen of fabric by measuring the angle of recovery,"Étoffes — Déterminatio
• ISO 2314:19737145,IS,,ISO 2314:1973,Gas turbines — Acceptance tests,Turbines à gaz — Essais de réception,1973-03-01,1,['27.040'],ISO/TC 192,9599,,[7146],"['en','fr']",20
• ISO 2314:19897146,IS,,ISO 2314:1989,Gas turbines — Acceptance tests,Turbines à gaz — Essais de réception,1989-04-27,2,['27.040'],ISO/TC 192,9599,[7145],"[37981,42989]","['en','fr']",20
• ISO 2314:1989/Amd 1:199720752,IS,Amd,ISO 2314:1989/Amd 1:1997,Gas turbines — Acceptance tests — Amendment 1: for combined-cycle power plants,Turbines à gaz — Essais de réception — Amendement 1: pour des i
• ISO 2314:1989/Cor 1:199729604,IS,Cor,ISO 2314:1989/Cor 1:1997,Gas turbines — Acceptance tests — Technical Corrigendum 1,Turbines à gaz — Essais de réception — Rectificatif technique 1,1997-11-27,2,['27.04
• ISO 2316:19737148,IS,,ISO 2316:1973,Withdrawal of ISO 2316-1973,Annulation de l'ISO 2316-1973,1973-02-01,1,['21.100.20'],ISO/TC 4,9599,,[4310],['en'],2
• ISO 2320:19837149,IS,,ISO 2320:1983,Prevailing torque type steel hexagon nuts — Mechanical and performance properties,"Écrous hexagonaux en acier, à freinage interne, à couple préalable — Carac
• ISO 2320:19977150,IS,,ISO 2320:1997,Prevailing torque type steel hexagon nuts — Mechanical and performance properties,Écrous hexagonaux autofreinés en acier — Caractéristiques mécaniques et per
• ISO 2320:1997/Cor 1:200644739,IS,Cor,ISO 2320:1997/Cor 1:2006,Prevailing torque type steel hexagon nuts — Mechanical and performance properties — Technical Corrigendum 1,Écrous hexagonaux autofreinés en a
• ISO 2320:200842184,IS,,ISO 2320:2008,Prevailing torque type steel nuts — Mechanical and performance properties,Écrous autofreinés en acier — Caractéristiques mécaniques et performances,2008-10-
• ISO 2321:19837151,IS,,ISO 2321:1983,Rubber threads — Methods of test,Fils élastiques — Méthodes d'essai,1983-11-01,2,['83.140.99'],ISO/TC 45/SC 4,9599,,"[40108,27012]","['en','fr']",18
• ISO 2321:200640108,IS,,ISO 2321:2006,Rubber threads — Methods of test,Fils élastiques — Méthodes d'essai,2006-11-22,3,['83.140.99'],ISO/TC 45/SC 4,9599,[7151],[68003],['en'],26
• ISO 2322:19817152,IS,,ISO 2322:1981,"Rubber, raw styrene-butadiene, emulsion polymerized — Test recipe and method of evaluation","Caoutchouc, butadiène-styrène brut, polymérisé en émulsion — Fo
• ISO 2322:1981/Amd 1:19937156,IS,Amd,ISO 2322:1981/Amd 1:1993,"Rubber, raw styrene-butadiene, emulsion polymerized — Test recipe and method of evaluation — Amendment 1","Caoutchouc, butadiène-styrène brut,
• ISO 2322:19857153,IS,,ISO 2322:1985,"Rubber, styrene-butadiene (SBR, YSBR) — Emulsion and solution-polymerized types — Test recipes and evaluation of vulcanization characteristics","Caoutchoucs
• ISO 2322:19967155,IS,,ISO 2322:1996,Styrene-butadiene rubber (SBR) — Emulsion- and solution-polymerized types — Evaluation procedures,Caoutchouc butadiène-styrène (SBR) — Types polymérisés en é
• ISO 2322:200944287,IS,,ISO 2322:2009,Styrene-butadiene rubber (SBR) — Emulsion- and solution-polymerized types — Evaluation procedures,Caoutchouc butadiène-styrène (SBR) — Types polymérisés en
• ISO 2322:201461315,IS,,ISO 2322:2014,Styrene-butadiene rubber (SBR) — Emulsion- and solution-polymerized types — Evaluation procedures,Caoutchouc butadiène-styrène (SBR) — Types polymérisés en
• ISO 2324:19727157,IS,,ISO 2324:1972,Withdrawal of ISO 2324-1972,Annulation de l'ISO 2324-1972,1972-10-01,1,['25.100.20'],ISO/TC 29,9599,,[6260],"['en','fr']",4
• ISO 2325:19797158,IS,,ISO 2325:1979,Coke — Size analysis (Nominal top size 20 mm or less),Coke — Analyse granulométrique (Dimension supérieure nominale égale ou inférieure à 20 mm),1979-02-01,2
• ISO 2325:19867159,IS,,ISO 2325:1986,Coke — Size analysis (Nominal top size 20 mm or less),Coke — Analyse granulométrique (Dimension nominale égale ou inférieure à 20 mm),1986-02-13,3,['75.160.1
• ISO 2328:19777162,IS,,ISO 2328:1977,Fork lift trucks — Hook-on type fork arms and fork carriers — Mounting dimensions,Chariots élévateurs à fourche — Bras de fourche à tenons et tabliers porte-
• ISO 2328:19931211,IS,,ISO 2328:1993,Fork-lift trucks — Hook-on type fork arms and fork arm carriages — Mounting dimensions,Chariots élévateurs à fourche — Bras de fourche à tenons et tabliers p
• ISO 2328:200741664,IS,,ISO 2328:2007,Fork-lift trucks — Hook-on type fork arms and fork arm carriages — Mounting dimensions,Chariots élévateurs à fourche — Bras de fourche à tenons et tabliers
• ISO 2330:19747165,IS,,ISO 2330:1974,Fork lift trucks — Fork arms — Technical characteristics and testing,Chariots élévateurs à fourche — Bras de fourche — Caractéristiques techniques et essais,
• ISO 2330:19951373,IS,,ISO 2330:1995,Fork-lift trucks — Fork arms — Technical characteristics and testing,Chariots élévateurs à fourches — Bras de fourche — Caractéristiques techniques et essais
• ISO 2332:19837167,IS,,ISO 2332:1983,Agricultural tractors and machinery — Connections — Clearance zone for the three-point linkage of implements,Tracteurs et matériels agricoles — Liaisons — Z
• ISO 2332:19937154,IS,,ISO 2332:1993,Agricultural tractors and machinery — Connection of implements via three-point linkage — Clearance zone around implement,Tracteurs et matériels agricoles — L
• ISO 2336-2:199625063,IS,,ISO 2336-2:1996,Hacksaw blades — Part 2: Dimensions for machine blades,Lames de scies droites à métaux — Partie 2: Dimensions des lames à machine,1996-04-18,1,['25.100.40
• ISO 2338:19727171,IS,,ISO 2338:1972,"Parallel pins, unhardened — Metric series",Goupilles cylindriques non trempées — Série métrique,1972-04-01,1,['21.060.50'],ISO/TC 2,9599,,"[20001,7172]","['
• ISO 2338:19867172,IS,,ISO 2338:1986,"Parallel pins, unhardened",Goupilles cylindriques non trempées,1986-10-30,2,['21.060.50'],ISO/TC 2,9599,[7171],[20001],"['en','fr']",3
• ISO 2339:19747173,IS,,ISO 2339:1974,"Taper pins, unhardened — Metric series",Goupilles coniques non trempées — Série métrique,1974-10-01,1,['21.060.50'],ISO/TC 2,9599,,[7174],"['en','fr']",2
• ISO 2340:19727175,IS,,ISO 2340:1972,Clevis pins — Metric series,Axes d'articulation — Série métrique,1972-04-01,1,['21.060.50'],ISO/TC 2,9599,,[7176],"['en','fr']",2
• ISO 2341:19727177,IS,,ISO 2341:1972,Clevis pins with heads — Metric series,Axes d'articulation avec tête — Série métrique,1972-04-01,1,['21.060.50'],ISO/TC 2,9599,,[7178],"['en','fr']",2
• ISO 2342:19727179,IS,,ISO 2342:1972,Slotted headless screws — Metric series,"Vis sans tête, fendues — Série métrique",1972-04-01,1,['21.060.10'],ISO/TC 2,9599,,"[29660,36429]","['en','fr']",1
• ISO 2343:19727180,IS,,ISO 2343:1972,Hexagon socket set screws — Metric series,"Vis sans tête, à six pans creux — Série métrique",1972-04-01,1,['21.060.50'],ISO/TC 2,9599,,"[9717,9715,9719,9713]
• ISO 2344:19817181,IS,,ISO 2344:1981,"Road vehicles — Spark plugs M 14 x 1,25 with conical seating and their cylinder head housing","Véhicules routiers — Bougies d'allumage M 14 x 1,25 à siège c
• ISO 2344:19877182,IS,,ISO 2344:1987,"Road vehicles — M14 x 1,25 spark-plugs with conical seating and their cylinder head housing","Véhicules routiers — Bougies d'allumage M14 x 1,25 à siège con
• ISO 2344:19927183,IS,,ISO 2344:1992,"Road vehicles — M14 x 1,25 spark-plugs with conical seating and their cylinder head housing","Véhicules routiers — Bougies d'allumage M14 x 1,25 à siège con
• ISO 2345:19817184,IS,,ISO 2345:1981,"Road vehicles — Spark plugs M 18 x 1,5 with conical seating and their cylinder head housing","Véhicules routiers — Bougies d'allumage M 18 x 1,5 à siège con
• ISO 2345:19877185,IS,,ISO 2345:1987,"Road vehicles — M18 x 1,5 spark-plugs with conical seating and their cylinder head housing","Véhicules routiers — Bougies d'allumage M18 x 1,5 à siège coniq
• ISO 2346:19827186,IS,,ISO 2346:1982,"Road vehicles — Compact spark plugs M 14 x 1,25 with flat seating and their cylinder head housing","Véhicules routiers — Bougies d'allumage M 14 x 1,25 'com
• ISO 2346:19917187,IS,,ISO 2346:1991,"Road vehicles — M14 x 1,25 compact spark-plugs with flat seating and their cylinder head housing","Véhicules routiers — Bougies d'allumage M14 x 1,25 'compa
• ISO 2347:19817188,IS,,ISO 2347:1981,"Road vehicles — Compact spark plugs M 14 x 1,25 with conical seating and their head housing","Véhicules routiers — Bougies d'allumage M 14 x 1,25 'compactes
• ISO 2347:19877189,IS,,ISO 2347:1987,"Road vehicles — M14 x 1,25 compact spark-plugs with conical seating and their cylinder head housing","Véhicules routiers — Bougies d'allumage M14 x 1,25 'co
• ISO 2349:19737190,IS,,ISO 2349:1973,"Rolling bearings — Tapered roller bearings — Sub-units — Tolerances — Metric series, normal tolerance class and tolerance class 6 — Inch series, tolerance c
• ISO 2351-1:200228549,IS,,ISO 2351-1:2002,Assembly tools for screws and nuts — Machine-operated screwdriver bits — Part 1: Screwdriver bits for slotted head screws,Outils de manoeuvre pour vis et
• ISO 2351-3:200229902,IS,,ISO 2351-3:2002,Assembly tools for screws and nuts — Machine-operated screwdriver bits — Part 3: Screwdriver bits for hexagon socket screws,Outils de manoeuvre pour vis e
• ISO 2351:19727191,IS,,ISO 2351:1972,"Screwdriver bits, for slotted head screws, with male hexagon drive","Embouts tournevis pour vis à tête fendue, à hexagone conducteur mâle",1972-06-01,1,['25
• ISO 2351:19867192,IS,,ISO 2351:1986,"Screwdriver bits for slotted head screws, with male hexagon drive","Embouts tournevis pour vis à tête fendue, à hexagone conducteur mâle",1986-11-13,2,['25.
• ISO 2352:19827193,IS,,ISO 2352:1982,Spiral ratchet screwdriver ends,Entraînement pour tournevis automatiques,1982-12-01,2,['25.140.30'],ISO/TC 29/SC 10,9599,,[29927],"['en','fr']",1
• ISO 2358:19727197,IS,,ISO 2358:1972,Prevailing torque-type steel hexagon locknuts — Dimensions — Metric series,Écrous de blocage hexagonaux en acier à freinage interne — Dimensions — Série métr
• ISO 2360:19827199,IS,,ISO 2360:1982,Non-conductive coatings on non-magnetic basis metals — Measurement of coating thickness — Eddy current method,Revêtements non conducteurs sur métal de base n
• ISO 2360:200331240,IS,,ISO 2360:2003,Non-conductive coatings on non-magnetic electrically conductive basis materials — Measurement of coating thickness — Amplitude-sensitive eddy-current method
• ISO 2361:19827200,IS,,ISO 2361:1982,Electrodeposited nickel coatings on magnetic and non-magnetic substrates — Measurement of coating thickness — Magnetic method,Revêtements électrolytiques de
• ISO 2370:19807209,IS,,ISO 2370:1980,Textiles — Determination of fineness of flax fibres — Permeametric methods,Textiles — Détermination de la finesse des fibres de lin — Méthodes perméamétrique
• ISO 2371:19747210,IS,,ISO 2371:1974,Field balancing equipment — Description and evaluation,Appareils pour l'équilibrage in situ — Description et caractéristiques,1974-07-01,1,['21.120.40'],ISO/
• ISO 2372:19747212,IS,,ISO 2372:1974,Mechanical vibration of machines with operating speeds from 10 to 200 rev/s — Basis for specifying evaluation standards,Vibrations mécaniques des machines ay
• ISO 2372:1974/Amd 1:19837213,IS,Amd,ISO 2372:1974/Amd 1:1983,Mechanical vibration of machines with operating speeds from 10 to 200 rev/s — Basis for specifying evaluation standards — Amendment 1,Vibration
• ISO 2375:19807216,IS,,ISO 2375:1980,Data processing — Procedure for registration of escape sequences,Traitement de l'information — Procédure pour l'enregistrement des séquences d'échappement,19
• ISO 2375:19857217,IS,,ISO 2375:1985,Data processing — Procedure for registration of escape sequences,Traitement de l'information — Procédure pour l'enregistrement des séquences d'échappement,19
• ISO 2376:19727218,IS,,ISO 2376:1972,Anodization (anodic oxidation) of aluminium and its alloys — Insulation check by measurement of breakdown potential,Anodisation de l'aluminium et de ses alli
• ISO 2376:201051487,IS,,ISO 2376:2010,Anodizing of aluminium and its alloys — Determination of electric breakdown potential,Anodisation de l'aluminium et de ses alliages — Détermination de la te
• ISO 2378:19727220,IS,,ISO 2378:1972,Aluminium alloy chill castings — Reference test bar,Alliages d'aluminium moulés en coquille — Éprouvette de référence,1972-03-01,1,['77.150.10'],ISO/TC 79/SC
• ISO 2380-1:19897224,IS,,ISO 2380-1:1989,Screwdrivers for slotted-head screws — Part 1: Tips for hand- and machine-operated screwdrivers,Tournevis pour vis à tête fendue — Partie 1: Extrémités de
• ISO 2380-1:199725446,IS,,ISO 2380-1:1997,Assembly tools for screws and nuts — Screwdrivers for slotted-head screws — Part 1: Tips for hand- and machine-operated screwdrivers,Outils de manoeuvre p
• ISO 2380-2:19927225,IS,,ISO 2380-2:1992,"Screwdrivers for slotted-head screws — Part 2: General requirements, lengths of blades and marking of hand-operated screwdrivers","Tournevis pour vis à tê
• ISO 2380-2:200029928,IS,,ISO 2380-2:2000,"Assembly tools for screws and nuts — Screwdrivers for slotted-head screws — Part 2: General requirements, lengths of blades and marking of hand-operated
• ISO 2380:19797223,IS,,ISO 2380:1979,Screwdriver blades for slotted head screws,Lames de tournevis pour vis à tête fendue,1979-08-01,2,['25.140.01'],ISO/TC 29/SC 10,9599,,[7224],"['en','fr']",5
• ISO 2381:19727226,IS,,ISO 2381:1972,Withdrawal of ISO 2381-1972,Annulation de l'ISO 2381-1972,1972-06-01,1,['53.040.01'],ISO/TC 101,9599,,[13741],"['en','fr']",2
• ISO 2382-1:19747227,IS,,ISO 2382-1:1974,Data processing — Vocabulary — Section 01 : Fundamental terms,Traitement de l'information — Vocabulaire — Chapitre 01 : Termes fondamentaux,1974-12-01,1,"[
• ISO 2382-1:19847228,IS,,ISO 2382-1:1984,Data processing — Vocabulary — Part 1: Fundamental terms,Traitement des données — Vocabulaire — Partie 1: Termes fondamentaux,1984-09-01,2,"['01.040.35','3
• ISO 2382-2:19767230,IS,,ISO 2382-2:1976,Data processing — Vocabulary — Part 2: Arithmetic and logic operations,Traitement de l'information — Vocabulaire — Partie 2: Opérations arithmétiques et lo
• ISO 2382-3:19767231,IS,,ISO 2382-3:1976,Data processing — Vocabulary — Section 03 : Equipment technology (Selected terms),Traitement de l'information — Vocabulaire — Chapitre 03 : Matériel et tec
• ISO 2382-3:19877232,IS,,ISO 2382-3:1987,Information processing systems — Vocabulary — Part 3: Equipment technology,Systèmes de traitement de l'information — Vocabulaire — Partie 3: Technologie du
• ISO 2382-4:19747233,IS,,ISO 2382-4:1974,Data processing — Vocabulary — Section 04 : Organization of data,Traitement de l'information — Vocabulaire — Chapitre 04 : Constitution des données,1974-12
• ISO 2382-4:19877234,IS,,ISO 2382-4:1987,Information processing systems — Vocabulary — Part 4: Organization of data,Systèmes de traitement de l'information — Vocabulaire — Partie 4: Organisation d
• ISO 2382-5:19747235,IS,,ISO 2382-5:1974,Data processing — Vocabulary — Section 05 : Representation of data,Traitement de l'information — Vocabulaire — Chapitre 05 : Représentation des données,197
• ISO 2382-5:19897236,IS,,ISO 2382-5:1989,Information processing systems — Vocabulary — Part 5: Representation of data,Systèmes de traitement de l'information — Vocabulaire — Partie 5: Représentati
• ISO 2382-6:19747237,IS,,ISO 2382-6:1974,Data processing — Vocabulary — Section 06 : Preparation and handling of data,Traitement de l'information — Vocabulaire — Chapitre 06 : Préparation et manie
• ISO 2382-6:19877238,IS,,ISO 2382-6:1987,Information processing systems — Vocabulary — Part 6: Preparation and handling of data,Systèmes de traitement de l'information — Vocabulaire — Partie 6: Pr
• ISO 2382-7:19777239,IS,,ISO 2382-7:1977,Data processing — Vocabulary — Section 07 : Digital computer programming,Traitement de l'information — Vocabulaire — Chapitre 07 : Programmation des calcul
• ISO 2382-8:19867242,IS,,ISO 2382-8:1986,"Information processing systems — Vocabulary — Part 8: Control, integrity and security","Sytèmes de traitement de l'information — Vocabulaire — Partie 8: C
• ISO 2382-9:19847244,IS,,ISO 2382-9:1984,Data processing — Vocabulary — Part 9: Data communication,Traitement des données — Vocabulaire — Partie 9: Communication des données,1984-03-01,1,"['01.040
• ISO 2382-10:19797247,IS,,ISO 2382-10:1979,Data processing — Vocabulary — Part 10: Operating techniques and facilities,Traitement de l'information — Vocabulaire — Partie 10: Techniques et moyens d'
• ISO 2382-11:19767248,IS,,ISO 2382-11:1976,"Data processing — Vocabulary — Section 11 : Control, input-output and arithmetic equipment","Traitement de l'information — Vocabulaire — Chapitre 11 : Or
• ISO 2382-12:19787250,IS,,ISO 2382-12:1978,"Data processing — Vocabulary — Section 12 : Data media, storage and related equipment","Traitement de l'information — Vocabulaire — Chapitre 12 : Support
• ISO 2382-12:19887251,IS,,ISO 2382-12:1988,Information processing systems — Vocabulary — Part 12: Peripheral equipment,Systèmes de traitement de l'information — Vocabulaire — Partie 12: Périphériqu
• ISO 2382-13:19847252,IS,,ISO 2382-13:1984,Data processing — Vocabulary — Part 13: Computer graphics,Traitement des données — Vocabulaire — Partie 13: Infographie,1984-09-01,1,"['01.040.35','35.140
• ISO 2382-14:19787254,IS,,ISO 2382-14:1978,"Data processing — Vocabulary — Part 14: Reliability, maintenance and availability","Traitement de l'information — Vocabulaire — Partie 14: Fiabilité, mai
• ISO 2382-15:19857256,IS,,ISO 2382-15:1985,Data processing — Vocabulary — Part 15: Programming languages,Traitement de l'information — Vocabulaire — Partie 15: Langages de programmation,1985-10-31,
• ISO 2382-16:19787258,IS,,ISO 2382-16:1978,Data processing — Vocabulary — Part 16: Information theory,Traitement de l'information — Vocabulaire — Partie 16: Théorie de l'information,1978-12-01,1,"[
• ISO 2382-18:19877261,IS,,ISO 2382-18:1987,Information processing systems — Vocabulary — Part 18: Distributed data processing,Systèmes de traitement de l'information — Vocabulaire — Partie 18: Info
• ISO 2382-19:19807262,IS,,ISO 2382-19:1980,Data processing — Vocabulary — Section 19 : Analog computing,Traitement de l'information — Vocabulaire — Chapitre 19 : Calcul analogique,1980-06-01,1,"['0
• ISO 2382-21:19857265,IS,,ISO 2382-21:1985,Data processing — Vocabulary — Part 21: Interfaces between process computer systems and technical processes,Traitement des données — Vocabulaire — Partie
• ISO 2385:19727275,IS,,ISO 2385:1972,"Corkwood in planks, virgin cork, ramassage, gleanings, corkwood refuse and corkwaste — Sampling","Liège en planches, liège male, liège de ramassage, liège g
• ISO 2385:19937276,IS,,ISO 2385:1993,"Corkwood in planks, virgin cork, cleanings, cork pieces, corkwood refuse and corkwaste — Sampling to determine moisture content","Liège préparé en planches,
• ISO 2385:201567067,IS,,ISO 2385:2015,"Packed cork — Virgin cork, raw reproduction cork, ramassage, gleanings, burnt cork, boiled reproduction cork and raw corkwaste — Sampling to determine moi
• ISO 2386:19727277,IS,,ISO 2386:1972,"Corkwood in planks, virgin cork, ramassage, gleanings, corkwood refuse and corkwaste — Determination of moisture content","Liège en planches, liège mâle, li
• ISO 2386:19887278,IS,,ISO 2386:1988,"Corkwood in planks, virgin cork, ramassage, gleanings, corkwood refuse and corkwaste — Determination of moisture content","Liège en planches, liège mâle, li
• ISO 2386:199823235,IS,,ISO 2386:1998,"Corkwood in planks, virgin cork, ramassage, gleanings, corkwood refuse and corkwaste — Determination of moisture content","Liège en planches, liège mâle, l
• ISO 2386:201567767,IS,,ISO 2386:2015,"Packed cork — Virgin cork, raw reproduction cork, ramassage, gleanings, burnt cork, boiled reproduction cork and raw corkwaste — Determination of moisture
• ISO 2387:19727279,IS,,ISO 2387:1972,Withdrawal of ISO 2387-1972,Annulation de l'ISO 2387-1972,1972-06-01,1,['53.040.01'],ISO/TC 101,9599,,[13741],"['en','fr']",1
• ISO 2388:19727280,IS,,ISO 2388:1972,Withdrawal of ISO 2388-1972,Annulation de l'ISO 2388-1972,1972-06-01,1,['53.040.01'],ISO/TC 101,9599,,[13741],"['en','fr']",1
• ISO 2389:19727281,IS,,ISO 2389:1972,Withdrawal of ISO 2389-1972,Annulation de l'ISO 2389-1972,1972-06-01,1,['53.040.01'],ISO/TC 101,9599,,[13741],"['en','fr']",1
• ISO 2390:19727282,IS,,ISO 2390:1972,Withdrawal of ISO 2390-1972,Annulation de l'ISO 2390-1972,1972-06-01,1,['53.040.01'],ISO/TC 101,9599,,[13741],"['en','fr']",1
• ISO 2391:19727283,IS,,ISO 2391:1972,Withdrawal of ISO 2391-1972,Annulation de l'ISO 2391-1972,1972-06-01,1,['53.040.01'],ISO/TC 101,9599,,[13741],"['en','fr']",2
• ISO 2392:19727284,IS,,ISO 2392:1972,Withdrawal of ISO 2392-1972,Annulation de l'ISO 2392-1972,1972-06-01,1,['53.040.01'],ISO/TC 101,9599,,[13741],"['en','fr']",1
• ISO 2393:19737285,IS,,ISO 2393:1973,"Rubber test mixes — Preparation, mixing and vulcanization — Equipment and procedures","Mélanges d'essais à base d'élastomères — Mélangeage, préparation et v
• ISO 2393:19947286,IS,,ISO 2393:1994,"Rubber test mixes — Preparation, mixing and vulcanization — Equipment and procedures","Mélanges d'essais à base de caoutchouc — Mélangeage, préparation et v
• ISO 2393:200843776,IS,,ISO 2393:2008,"Rubber test mixes — Preparation, mixing and vulcanization — Equipment and procedures","Mélanges d'essais à base de caoutchouc — Mélangeage, préparation et
• ISO 2394:19737287,IS,,ISO 2394:1973,General principles for the verification of the safety of structures,Principes généraux pour vérifier la sécurité des ouvrages,1973-02-01,1,['91.080.01'],ISO/
• ISO 2394:19867288,IS,,ISO 2394:1986,General principles on reliability for structures,Principes généraux de la fiabilité des constructions,1986-11-06,2,['91.080.01'],ISO/TC 98/SC 2,9599,[7287],[
• ISO 2394:1986/Add 1:19887290,IS,Add,ISO 2394:1986/Add 1:1988,General principles on reliability for structures — Addendum 1,Principes généraux de la fiabilité des constructions — Additif 1,1988-12-15,2,['9
• ISO 2394:19987289,IS,,ISO 2394:1998,General principles on reliability for structures,Principes généraux de la fiabilité des constructions,1998-06-11,3,['91.080.01'],ISO/TC 98/SC 2,9599,"[7290,7
• ISO 2395:19727291,IS,,ISO 2395:1972,Test sieves and test sieving — Vocabulary,Tamis et tamisage de contrôle — Vocabulaire,1972-12-01,1,"['01.040.19','19.120']",ISO/TC 24,9599,,[7292],"['en','fr
• ISO 2398:19787293,IS,,ISO 2398:1978,"Industrial rubber hose for compressed air (up to 2,5 MPa)","Tuyaux en caoutchouc à usage industriel pour l'air comprimé (jusqu'à 2,5 MPa)",1978-12-01,2,['23
• ISO 2398:19877294,IS,,ISO 2398:1987,"Industrial rubber hose for compressed air (up to 2,5 MPa)","Tuyaux en caoutchouc à usage industriel pour l'air comprimé (jusqu'à 2,5 MPa)",1987-10-08,3,['23
• ISO 2398:19957295,IS,,ISO 2398:1995,"Rubber hose, textile-reinforced, for compressed air — Specification",Tuyaux en caoutchouc renforcés textile pour l'air comprimé — Spécifications,1995-12-21,
• ISO 2398:200637225,IS,,ISO 2398:2006,"Rubber hoses, textile-reinforced, for compressed air — Specification",Tuyaux en caoutchouc renforcés textile pour l'air comprimé — Spécifications,2006-04-2
• ISO 2398:201668043,IS,,ISO 2398:2016,"Rubber hoses, textile-reinforced, for compressed air — Specification",Tuyaux en caoutchouc renforcés textile pour l'air comprimé — Spécifications,2016-10-2
• ISO 2400:19727296,IS,,ISO 2400:1972,Welds in steel — Reference block for the calibration of equipment for ultrasonic examination,Soudures sur acier — Bloc de référence pour l'étalonnage des app
• ISO 2400:201257041,IS,,ISO 2400:2012,Non-destructive testing — Ultrasonic testing — Specification for calibration block No. 1,Essais non destructifs — Contrôle par ultrasons — Spécifications re
• ISO 2401:19727297,IS,,ISO 2401:1972,"Covered electrodes — Determination of the efficiency, metal recovery and deposition coefficient","Électrodes enrobées — Détermination de l'efficacité, du re
• ISO 2403:19727299,IS,,ISO 2403:1972,Textiles — Cotton fibres — Determination of micronaire value,Textiles — Fibres de coton — Détermination de l'indice micronaire,1972-10-01,1,['59.060.10'],ISO
• ISO 2403:201455556,IS,,ISO 2403:2014,Textiles — Cotton fibres — Determination of micronaire value,Textiles — Fibres de coton — Détermination de l'indice micronaire,2014-02-05,2,['59.060.10'],IS
• ISO 2404:19797300,IS,,ISO 2404:1979,Cinematography — Six-track magnetic sound records on 70 mm film for release prints — Locations and dimensions,Cinématographie —Copies d'exploitation 70 mm à
• ISO 2405:19727302,IS,,ISO 2405:1972,Recommended practice for radiographic inspection of fusion welded butt joints for steel plates 50 to 200 mm thick,Pratiques recommandées pour l'examen radiog
• ISO 2407:19737304,IS,,ISO 2407:1973,Test conditions for internal cylindrical grinding machines with horizontal spindle — Testing of accuracy,"Conditions d'essais des machines à rectifier les su
• ISO 2407:1973/Add 1:19747306,IS,Add,ISO 2407:1973/Add 1:1974,Test conditions for internal cylindrical grinding machines with horizontal spindle — Testing of accuracy — Addendum 1,"Conditions d'essais des
• ISO 2407:19847305,IS,,ISO 2407:1984,Acceptance conditions for internal cylindrical grinding machines with horizontal spindle — Testing of accuracy,"Conditions de réception des machines à rectif
• ISO 2407:199722464,IS,,ISO 2407:1997,Test conditions for internal cylindrical grinding machines with horizontal spindle — Testing of accuracy,Conditions d'essai des machines à rectifier les sur
• ISO 2407:1997/Amd 1:201666192,IS,Amd,ISO 2407:1997/Amd 1:2016,Test conditions for internal cylindrical grinding machines with horizontal spindle — Testing of accuracy — Amendment 1,Conditions d'essai des
• ISO 2408:19737307,IS,,ISO 2408:1973,Steel wire ropes for general purposes — Characteristics,Câbles en acier pour usages courants — Caractéristiques,1973-02-01,1,['77.140.65'],ISO/TC 105,9599,,[
• ISO 2408:19857308,IS,,ISO 2408:1985,Steel wire ropes for general purposes — Characteristics,Câbles en acier pour usages courants — Caractéristiques,1985-12-19,2,['77.140.65'],ISO/TC 105,9599,[7
• ISO 2408:200431616,IS,,ISO 2408:2004,Steel wire ropes for general purposes — Minimum requirements,Câbles en acier pour usages courants — Exigences minimales,2004-01-26,3,['77.140.65'],ISO/TC 10
• ISO 2409:19727309,IS,,ISO 2409:1972,Paints and varnishes — Cross-cut test,Peintures et vernis — Essai de quadrillage,1972-08-01,1,['87.040'],ISO/TC 35/SC 9,9599,,[7310],"['en','fr']",6
• ISO 2409:19927310,IS,,ISO 2409:1992,Paints and varnishes — Cross-cut test,Peintures et vernis — Essai de quadrillage,1992-08-20,2,['87.040'],ISO/TC 35/SC 9,9599,[7309],[37487],"['en','fr']",9
• ISO 2409:200737487,IS,,ISO 2409:2007,Paints and varnishes — Cross-cut test,Peintures et vernis — Essai de quadrillage,2007-05-11,3,['87.040'],ISO/TC 35/SC 9,9599,[7310],[51923],"['en','fr','ru'
• ISO 2409:201351923,IS,,ISO 2409:2013,Paints and varnishes — Cross-cut test,Peintures et vernis — Essai de quadrillage,2013-02-12,4,['87.040'],ISO/TC 35/SC 9,9599,[37487],[76041],"['en','fr']",1
• ISO 2411:19737312,IS,,ISO 2411:1973,Rubber- or plastics-coated fabrics — Determination of coating adhesion,Supports textiles revêtus de caoutchouc ou de plastique — Détermination de l'adhérence
• ISO 2411:19917313,IS,,ISO 2411:1991,Rubber- or plastics-coated fabrics — Determination of coating adhesion,Supports textiles revêtus de caoutchouc ou de plastique — Détermination de l'adhérence
• ISO 2411:200023793,IS,,ISO 2411:2000,Rubber- or plastics-coated fabrics — Determination of coating adhesion,Supports textiles revêtus de caoutchouc ou de plastique — Détermination de l'adhérenc
• ISO 2411:201770220,IS,,ISO 2411:2017,Rubber- or plastics-coated fabrics — Determination of coating adhesion,Supports textiles revêtus de caoutchouc ou de plastique — Détermination de l'adhérenc
• ISO 2415:19737315,IS,,ISO 2415:1973,Shackles — General characteristics,Manilles — Caractéristiques générales,1973-09-01,1,['53.020.30'],ISO/TC 111/SC 3,9599,,[7316],['en'],7
• ISO 2415:19877316,IS,,ISO 2415:1987,Forged shackles for general lifting purposes — Dee shackles and bow shackles,Manilles forgées pour levage — Manilles droites et manilles lyres,1987-04-30,2,[
• ISO 2415:200437525,IS,,ISO 2415:2004,Forged shackles for general lifting purposes — Dee shackles and bow shackles,Manilles forgées pour levage — Manilles droites et manilles lyres,2004-07-02,3,
• ISO 2416:19767317,IS,,ISO 2416:1976,Passenger cars — Load distribution,Voitures particulières — Répartition des charges,1976-11-01,2,['43.100'],ISO/TC 22,9599,,[7318],"['en','fr']",3
• ISO 2417:19727319,IS,,ISO 2417:1972,Leather — Determination of absorption of water,Cuir — Détermination de l'absorption d'eau,1972-12-01,1,['59.140.30'],IULTCS,9599,,[24032],"['en','fr']",2
• ISO 2417:200224032,IS,,ISO 2417:2002,Leather — Physical and mechanical tests — Determination of the static absorption of water,Cuir — Essais physiques et mécaniques — Détermination de l'absorpt
• ISO 2417:201668858,IS,,ISO 2417:2016,Leather — Physical and mechanical tests — Determination of the static absorption of water,Cuir — Essais physiques et mécaniques — Détermination de l'absorpt
• ISO 2418:19727320,IS,,ISO 2418:1972,Leather — Laboratory samples — Location and identification,Cuir — Échantillons pour laboratoire — Emplacement et identification,1972-10-01,1,['59.140.30'],IU
• ISO 2418:200230426,IS,,ISO 2418:2002,"Leather — Chemical, physical and mechanical and fastness tests — Sampling location","Cuir — Essais chimiques, physiques, mécaniques et de solidité — Emplac
• ISO 2418:201767100,IS,,ISO 2418:2017,"Leather — Chemical, physical and mechanical and fastness tests — Sampling location","Cuir — Essais chimiques, physiques, mécaniques et de solidité — Emplac
• ISO 2419:19727321,IS,,ISO 2419:1972,Leather — Conditioning of test pieces for physical tests,Cuir — Conditionnement des éprouvettes pour essais physiques,1972-10-01,1,['59.140.30'],IULTCS,9599,
• ISO 2419:200224030,IS,,ISO 2419:2002,Leather — Physical and mechanical tests — Sample preparation and conditioning,Cuir — Essais physiques et mécaniques — Préparation et conditionnement des éch
• ISO 2419:200641443,IS,,ISO 2419:2006,Leather — Physical and mechanical tests — Sample preparation and conditioning,Cuir — Essais physiques et mécaniques — Préparation et conditionnement des éch
• ISO 2419:201256697,IS,,ISO 2419:2012,Leather — Physical and mechanical tests — Sample preparation and conditioning,Cuir — Essais physiques et mécaniques — Préparation et conditionnement des éch
• ISO 2420:19727322,IS,,ISO 2420:1972,Leather — Determination of apparent density,Cuir — Détermination de la masse volumique apparente,1972-10-01,1,['59.140.30'],IULTCS,9599,,[31146],"['en','fr']
• ISO 2420:200231146,IS,,ISO 2420:2002,Leather — Physical and mechanical tests — Determination of apparent density,Cuir — Essais physiques et mécaniques — Détermination de la masse volumique appa
• ISO 2421:19727323,IS,,ISO 2421:1972,Cylindrical abrasive sleeves — Designation — Dimensions — Tolerances,Manchons abrasifs cylindriques — Désignation — Dimensions — Tolérances,1972-10-01,1,['25
• ISO 2422:19727324,IS,,ISO 2422:1972,Truncated cone abrasive sleeves — Designation — Dimensions — Tolerances,Manchons abrasifs tronconiques — Désignation — Dimensions — Tolérances,1972-10-01,1,[
• ISO 2422:1972/Add 1:19757326,IS,Add,ISO 2422:1972/Add 1:1975,Truncated cone abrasive sleeves — Designation — Dimensions — Tolerances — Addendum 1,Manchons abrasifs tronconiques — Désignation — Dimensions
• ISO 2424:19777328,IS,,ISO 2424:1977,Textile floor coverings — Classification and terminology,Revêtements de sol textiles — Classification et terminologie,1977-09-01,2,['97.150'],ISO/TC 219,959
• ISO 2424:19927329,IS,,ISO 2424:1992,Textile floor coverings — Vocabulary,Revêtements de sol textiles — Vocabulaire,1992-02-27,3,['97.150'],ISO/TC 219,9599,[7328],[34166],"['en','fr']",25
• ISO 2424:200734166,IS,,ISO 2424:2007,Textile floor coverings — Vocabulary,Revêtements de sol textiles — Vocabulaire,2007-02-08,4,['97.150'],ISO/TC 219,9599,[7329],"[84768,61666]","['en','fr']",
• ISO 2425:19747330,IS,,ISO 2425:1974,Measurement of flow in tidal channels,Mesure de débit dans les canaux à marée,1974-07-01,1,['17.120.20'],ISO/TC 113,9599,,[7331],"['en','fr']",15
• ISO 2425:1974/Amd 1:19827332,IS,Amd,ISO 2425:1974/Amd 1:1982,Measurement of flow in tidal channels — Amendment 1,Mesure de débit dans les canaux à marée — Amendement 1,1982-12-01,1,['17.120.20'],ISO/TC 11
• ISO 2425:19997331,IS,,ISO 2425:1999,Measurement of liquid flow in open channels under tidal conditions,Mesure de débit des liquides dans les canaux découverts dans des conditions de marée,1999-
• ISO 2425:1999/Amd 1:200334413,IS,Amd,ISO 2425:1999/Amd 1:2003,Measurement of liquid flow in open channels under tidal conditions — Amendment 1,Mesure de débit des liquides dans les canaux découverts dans
• ISO 2426-1:20007334,IS,,ISO 2426-1:2000,Plywood — Classification by surface appearance — Part 1: General,Contreplaqué — Classification selon l'aspect des faces — Partie 1: Généralités,2000-11-30,
• ISO 2426-2:200030475,IS,,ISO 2426-2:2000,Plywood — Classification by surface appearance — Part 2: Hardwood,Contreplaqué — Classification selon l'aspect des faces — Partie 2: Bois feuillus,2000-12
• ISO 2426:19747333,IS,,ISO 2426:1974,Plywood — Veneer plywood with rotary cut veneer for general use — General rules for classification by appearance,"Contreplaqué — Contreplaqué à plis, avec pl
• ISO 2427:19747335,IS,,ISO 2427:1974,Plywood — Veneer plywood with rotary cut veneer for general use — Classification by appearance of panels with outer veneers of beech,"Contreplaqué — Contrepl
• ISO 2428:19747336,IS,,ISO 2428:1974,Plywood — Veneer plywood with rotary cut veneer for general use — Classification by appearance of panels with outer veneers of birch,"Contreplaqué — Contrepl
• ISO 2429:19747337,IS,,ISO 2429:1974,Plywood — Veneer plywood with rotary cut veneer for general use — Classification by appearance of panels with outer veneers of broadleaved species of tropica
• ISO 2430:19747338,IS,,ISO 2430:1974,Plywood — Veneer plywood with rotary cut veneer for general use — Classification by appearance of panels with outer veneers of poplar,"Contreplaqué — Contrep
• ISO 2431:19807339,IS,,ISO 2431:1980,Paint and varnishes — Determination of flow time by use of flow cups,Peintures et vernis — Détermination du temps d'écoulement au moyen de coupes d'écoulemen
• ISO 2431:19847340,IS,,ISO 2431:1984,Paints and varnishes — Determination of flow time by use of flow cups,Peintures et vernis — Détermination du temps d'écoulement au moyen de coupes d'écouleme
• ISO 2431:19937341,IS,,ISO 2431:1993,Paints and varnishes — Determination of flow time by use of flow cups,Peintures et vernis — Détermination du temps d'écoulement au moyen de coupes d'écouleme
• ISO 2431:1993/Cor 1:199424237,IS,Cor,ISO 2431:1993/Cor 1:1994,Paints and varnishes — Determination of flow time by use of flow cups — Technical Corrigendum 1,Peintures et vernis — Détermination du temps d
• ISO 2431:1993/Cor 2:199931911,IS,Cor,ISO 2431:1993/Cor 2:1999,Paints and varnishes — Determination of flow time by use of flow cups — Technical Corrigendum 2,Peintures et vernis — Détermination du temps d
• ISO 2431:201151936,IS,,ISO 2431:2011,Paints and varnishes — Determination of flow time by use of flow cups,Peintures et vernis — Détermination du temps d'écoulement au moyen de coupes d'écoulem
• ISO 2433:19737342,IS,,ISO 2433:1973,Test conditions for external cylindrical grinding machines with a movable table — Testing of accuracy,Conditions d'essais des machines à rectifier les surfac
• ISO 2433:19847343,IS,,ISO 2433:1984,Acceptance conditions for external cylindrical grinding machines with a movable table — Testing of accuracy,Conditions de réception des machines à rectifier
• ISO 2437:19727348,IS,,ISO 2437:1972,Recommended practice for the X-ray inspection of fusion welded butt joints for aluminium and its alloys and magnesium and its alloys 5 to 50 mm thick,Pratiqu
• ISO 2439:19807351,IS,,ISO 2439:1980,"Polymeric materials, cellular flexible — Determination of hardness (indentation technique)",Matériaux polymères alvéolaires souples — Détermination de la du
• ISO 2439:199720155,IS,,ISO 2439:1997,Flexible cellular polymeric materials — Determination of hardness (indentation technique),Matériaux polymères alvéolaires souples — Détermination de la dure
• ISO 2439:1997/Cor 1:199830431,IS,Cor,ISO 2439:1997/Cor 1:1998,Flexible cellular polymeric materials — Determination of hardness (indentation technique) — Technical Corrigendum 1,Matériaux polymères alvéol
• ISO 2440:19837352,IS,,ISO 2440:1983,"Polymeric materials, cellular flexible — Accelerated ageing tests",Matériaux polymères alvéolaires souples — Essais de vieillissement accéléré,1983-12-01,2,
• ISO 2440:19972298,IS,,ISO 2440:1997,Flexible and rigid cellular polymeric materials — Accelerated ageing tests,Matériaux polymères alvéolaires souples et rigides — Essais de vieillissement accé
• ISO 2440:1997/Amd 1:201050767,IS,Amd,ISO 2440:1997/Amd 1:2010,Flexible and rigid cellular polymeric materials — Accelerated ageing tests — Amendment 1,Matériaux polymères alvéolaires souples et rigides —
• ISO 2440:1997/Amd 2:201463705,IS,Amd,ISO 2440:1997/Amd 2:2014,Flexible and rigid cellular polymeric materials — Accelerated ageing tests — Amendment 2,Matériaux polymères alvéolaires souples et rigides —
• ISO 2440:201977359,IS,,ISO 2440:2019,Flexible and rigid cellular polymeric materials — Accelerated ageing tests,Matériaux polymères alvéolaires souples et rigides — Essais de vieillissement acc
• ISO 2441:19757353,IS,,ISO 2441:1975,Pipeline flanges for general use — Shapes and dimensions of pressure-tight surfaces,Brides de tuyauterie pour usage général — Formes et dimensions des surfac
• ISO 2444:19747355,IS,,ISO 2444:1974,Joints in building — Vocabulary,Joints dans le bâtiment — Vocabulaire,1974-11-01,1,"['91.060.99','01.040.91']",ISO/TC 59,9599,,[7356],"['en','fr']",2
• ISO 2444:19887356,IS,,ISO 2444:1988,Joints in building — Vocabulary,Joints dans le bâtiment — Vocabulaire,1988-12-15,2,"['91.060.99','01.040.91']",ISO/TC 59/SC 2,9599,[7355],[72244],"['en','fr'
• ISO 2446:19767358,IS,,ISO 2446:1976,Milk — Determination of fat content (Routine method),Lait — Détermination de la teneur en matière grasse (Méthode de routine),1976-10-01,1,['67.100.10'],ISO/
• ISO 2446:200851019,IS,,ISO 2446:2008,Milk — Determination of fat content,Lait — Détermination de la teneur en matière grasse,2008-08-26,2,['67.100.10'],ISO/TC 34/SC 5,9599,[7358],[65935],"['en'
• ISO 2447:19747360,IS,,ISO 2447:1974,Fruit and vegetable products — Determination of tin,Produits dérivés des fruits et légumes — Dosage de l'étain,1974-02-01,1,['67.080.01'],ISO/TC 34/SC 3,9599
• ISO 2448:19737362,IS,,ISO 2448:1973,Fruit and vegetable products — Determination of ethanol,Produits dérivés des fruits et légumes — Dosage de l'éthanol,1973-05-01,1,['67.080.01'],ISO/TC 34/SC
• ISO 2450:19727364,IS,,ISO 2450:1972,Cream — Determination of fat content (Reference method),Crème — Détermination de la teneur en matière grasse (Méthode de référence),1972-12-01,1,['67.100.99'
• ISO 2450:19857365,IS,,ISO 2450:1985,Cream — Determination of fat content — Gravimetric method (Reference method),Crème — Détermination de la teneur en matière grasse — Méthode gravimétrique (Mé
• ISO 2450:199926546,IS,,ISO 2450:1999,Cream — Determination of fat content — Gravimetric method (Reference method),Crème — Détermination de la teneur en matière grasse — Méthode gravimétrique (M
• ISO 2450:200851013,IS,,ISO 2450:2008,Cream — Determination of fat content — Gravimetric method (Reference method),Crème — Détermination de la teneur en matière grasse — Méthode gravimétrique (M
• ISO 2451:19737366,IS,,ISO 2451:1973,Cocoa beans — Specification,Fèves de cacao — Spécifications,1973-12-01,1,['67.140.30'],ISO/TC 34,9599,,"[7367,56534]","['en','fr']",3
• ISO 2451:201456534,IS,,ISO 2451:2014,Cocoa beans — Specification,Fèves de cacao — Spécifications,2014-10-20,2,['67.140.30'],ISO/TC 34/SC 18,9599,[7366],[68202],['en'],11
• ISO 2453:19757368,IS,,ISO 2453:1975,Styrene-butadiene copolymers — Determination of bound styrene content,Copolymères butadiène-styrène — Dosage du styrène lié,1975-02-01,1,['83.040.10'],ISO/TC
• ISO 2453:19917369,IS,,ISO 2453:1991,"Rubber, raw styrene-butadiene, emulsion-polymerized — Determination of bound styrene content — Refractive index method",Caoutchouc butadiène-styrène brut po
• ISO 2453:1991/Cor 1:200338907,IS,Cor,ISO 2453:1991/Cor 1:2003,"Rubber, raw styrene-butadiene, emulsion-polymerized — Determination of bound styrene content — Refractive index method — Technical Corrigendu
• ISO 2454:19827370,IS,,ISO 2454:1982,Rubber products — Determination of zinc content — EDTA titrimetric method,Produits en caoutchouc — Détermination de la teneur en zinc — Méthode titrimétrique
• ISO 2454:19952150,IS,,ISO 2454:1995,Rubber products — Determination of zinc content — EDTA titrimetric method,Produits en caoutchouc — Dosage du zinc — Méthode titrimétrique à l'EDTA,1995-03-30
• ISO 2457:19767372,IS,,ISO 2457:1976,Solid wood parquet — Classification of beech strips,Parquet en bois massif — Classement des lames en hêtre,1976-06-01,2,['79.080'],ISO/TC 218,9599,,[80116],"
• ISO 2463:19737377,IS,,ISO 2463:1973,Sodium chlorate for industrial use — Determination of chloride content — Mercurimetric method,Chlorate de sodium à usage industriel — Dosage des chlorures —
• ISO 2467:19807382,IS,,ISO 2467:1980,Cinematography — Image area produced by 65 and 70 mm motion-picture camera aperture and maximum projectable image area on 70 mm motion-picture prints — Posit
• ISO 2469:19777383,IS,,ISO 2469:1977,"Paper, board and pulps — Measurement of diffuse reflectance factor","Papier, carton et pâtes — Mesurage du facteur de réflectance diffuse",1977-02-01,2,"['8
• ISO 2469:19941682,IS,,ISO 2469:1994,"Paper, board and pulps — Measurement of diffuse reflectance factor","Papier, carton et pâtes — Mesurage du facteur de réflectance diffuse",1994-11-17,3,"['8
• ISO 2469:1994/Cor 1:199830379,IS,Cor,ISO 2469:1994/Cor 1:1998,"Paper, board and pulps — Measurement of diffuse reflectance factor — Technical Corrigendum 1","Papier, carton et pâtes — Mesurage du facteur
• ISO 2469:200741960,IS,,ISO 2469:2007,"Paper, board and pulps — Measurement of diffuse radiance factor","Papier, carton et pâtes — Mesurage du facteur de luminance énergétique diffuse",2007-06-1
• ISO 2469:201451631,IS,,ISO 2469:2014,"Paper, board and pulps — Measurement of diffuse radiance factor (diffuse reflectance factor)","Papier, carton et pâtes — Mesurage du facteur de luminance é
• ISO 2470-1:200941604,IS,,ISO 2470-1:2009,"Paper, board and pulps — Measurement of diffuse blue reflectance factor — Part 1: Indoor daylight conditions (ISO brightness)","Papier, carton et pâtes —
• ISO 2470:197333194,IS,,ISO 2470:1973,Paper and board — Measurement of diffuse blue reflectance factor (ISO brightness),Papier et carton — Mesurage du facteur de réflectance diffuse dans le bleu
• ISO 2470:19777384,IS,,ISO 2470:1977,Paper and board — Measurement of diffuse blue reflectance factor (ISO brightness),Papier et carton — Mesurage du facteur de réflectance diffuse dans le bleu
• ISO 2470:19991466,IS,,ISO 2470:1999,"Paper, board and pulps — Measurement of diffuse blue reflectance factor (ISO brightness)","Papier, carton et pâtes — Mesurage du facteur de réflectance diff
• ISO 2471:19777385,IS,,ISO 2471:1977,Paper and board — Determination of opacity (paper backing) — Diffuse reflectance method,Papier et carton — Détermination de l'opacité sur fond papier — Métho
• ISO 2471:19981664,IS,,ISO 2471:1998,Paper and board — Determination of opacity (paper backing) — Diffuse reflectance method,Papier et carton — Détermination de l'opacité sur fond papier — Métho
• ISO 2475:19877389,IS,,ISO 2475:1987,"Rubber, chloroprene (CR) — General purpose types — Evaluation procedures",Caoutchouc chloroprène (CR) — Types à usage général — Méthodes d'évaluation,1987-0
• ISO 2475:19907390,IS,,ISO 2475:1990,"Rubber, chloroprene (CR) — General purpose types — Evaluation procedure",Caoutchouc chloroprène (CR) — Types à usage général — Méthode d'évaluation,1990-12-
• ISO 2475:1990/Cor 1:199322195,IS,Cor,ISO 2475:1990/Cor 1:1993,"Rubber, chloroprene (CR) — General purpose types — Evaluation procedure — Technical Corrigendum 1",Caoutchouc chloroprène (CR) — Types à usag
• ISO 2475:199927915,IS,,ISO 2475:1999,Chloroprene rubber (CR) — General-purpose types — Evaluation procedure,Caoutchouc chloroprène (CR) — Types à usage général — Méthode d'évaluation,1999-12-02
• ISO 2475:1999/Amd 1:200539056,IS,Amd,ISO 2475:1999/Amd 1:2005,Chloroprene rubber (CR) — General-purpose types — Evaluation procedure — Amendment 1,Caoutchouc chloroprène (CR) — Types à usage général — Mét
• ISO 2475:1999/Cor 1:200135231,IS,Cor,ISO 2475:1999/Cor 1:2001,Chloroprene rubber (CR) — General-purpose types — Evaluation procedure — Technical Corrigendum 1,Caoutchouc chloroprène (CR) — Types à usage g
• ISO 2475:201155617,IS,,ISO 2475:2011,Chloroprene rubber (CR) — General-purpose types — Evaluation procedure,Caoutchouc chloroprène (CR) — Types à usage général — Méthode d'évaluation,2011-10-25
• ISO 2476:19807391,IS,,ISO 2476:1980,"Rubber, butadiene (BR) — Solution- polymerized types — Test recipe and evaluation of vulcanization characteristics",Caoutchouc butadiène (BR) — Types polymé
• ISO 2476:1980/Amd 1:19937393,IS,Amd,ISO 2476:1980/Amd 1:1993,"Rubber, butadiene (BR) — Solution- polymerized types — Test recipe and evaluation of vulcanization characteristics — Amendment 1",Caoutchouc b
• ISO 2476:19887392,IS,,ISO 2476:1988,"Rubber, butadiene (BR) — Solution-polymerized types — Evaluation procedure",Caoutchouc butadiène (BR) — Types polymérisés en solution — Méthode d'évaluation
• ISO 2476:199623844,IS,,ISO 2476:1996,"Rubber, butadiene (BR) — Solution-polymerized types — Evaluation procedures",Caoutchouc butadiène (BR) — Types polymérisés en solution — Méthode d'évaluati
• ISO 2476:200944286,IS,,ISO 2476:2009,Butadiene rubber (BR) — Solution-polymerized types — Evaluation procedures,Caoutchouc butadiène (BR) — Types polymérisés en solution — Méthodes d'évaluation
• ISO 2477:19737395,IS,,ISO 2477:1973,Shaped insulating refractory products — Determination of the permanent change in dimensions on heating,Produits réfractaires isolants façonnés — Déterminatio
• ISO 2477:19877396,IS,,ISO 2477:1987,Shaped insulating refractory products — Determination of permanent change in dimensions on heating,Produits réfractaires isolants façonnés — Détermination de
• ISO 2478:19737397,IS,,ISO 2478:1973,Dense shaped refractory products — Determination of the permanent changes in dimensions on heating,Produits réfractaires denses façonnés — Détermination de l
• ISO 2478:19877398,IS,,ISO 2478:1987,Dense shaped refractory products — Determination of permanent change in dimensions on heating,Produits réfractaires façonnés denses — Détermination de la var
• ISO 2490:19757411,IS,,ISO 2490:1975,"Single-start solid (monobloc) gear hobs with axial keyway, 1 to 20 module and 1 to 20 diametral pitch — Nominal dimensions","Fraises-mères monoblocs à une e
• ISO 2490:19967412,IS,,ISO 2490:1996,"Single-start solid (monobloc) gear hobs with tenon drive or axial keyway, 1 to 40 module — Nominal dimensions","Fraises-mères monoblocs à un filet, à entraî
• ISO 2493-2:201152429,IS,,ISO 2493-2:2011,Paper and board — Determination of bending resistance — Part 2: Taber-type tester,Papier et carton — Détermination de la résistance à la flexion — Partie
• ISO 2493:19737415,IS,,ISO 2493:1973,Paper and board — Determination of stiffness — Static bending method,Papier et carton — Détermination de la rigidité — Méthode par flexion statique,1973-11-0
• ISO 2493:19927416,IS,,ISO 2493:1992,Paper and board — Determination of resistance to bending,Papier et carton — Détermination de la résistance à la flexion,1992-09-17,2,['85.060'],ISO/TC 6/SC 2
• ISO 2494:19747417,IS,,ISO 2494:1974,Paper and board — Recommended procedure for the determination of roughness — Constant-pressure air-flow method,Papier et carton — Mode opératoire recommandé
• ISO 2495:19727418,IS,,ISO 2495:1972,Iron blue pigments for paints,Bleus de fer pour peintures,1972-08-01,1,['87.060.10'],ISO/TC 256,9599,,[7419],"['en','fr']",2
• ISO 2503:19837430,IS,,ISO 2503:1983,"Pressure regulators for gas cylinders used in welding, cutting and allied processes","Détendeurs pour bouteilles à gaz utilisés pour le soudage, le coupage
• ISO 2503:1983/Add 1:19847431,IS,Add,ISO 2503:1983/Add 1:1984,"Pressure regulators for gas cylinders used in welding, cutting and allied processes — Addendum 1","Détendeurs pour bouteilles à gaz utilisés p
• ISO 2503:199821030,IS,,ISO 2503:1998,"Gas welding equipment — Pressure regulators for gas cylinders used in welding, cutting and allied processes up to 300 bar","Matériel de soudage aux gaz —
• ISO 2504:19737432,IS,,ISO 2504:1973,Radiography of welds and viewing conditions for films — Utilization of recommended patterns of image quality indicators (I.Q.I.),Radiographie de soudures et
• ISO 2505-1:19947435,IS,,ISO 2505-1:1994,Thermoplastics pipes — Longitudinal reversion — Part 1: Determination methods,Tubes en matières thermoplastiques — Retrait longitudinal à chaud — Partie 1:
• ISO 2505-2:19947436,IS,,ISO 2505-2:1994,Thermoplastics pipes — Longitudinal reversion — Part 2: Determination parameters,Tubes en matières thermoplastiques — Retrait longitudinal à chaud — Partie
• ISO 2505-2:1994/Cor 1:199728937,IS,Cor,ISO 2505-2:1994/Cor 1:1997,Thermoplastics pipes — Longitudinal reversion — Part 2: Determination parameters — Technical Corrigendum 1,Tubes en matières thermoplastique
• ISO 2505:19817434,IS,,ISO 2505:1981,Unplasticized polyvinyl chloride (PVC) pipes — Longitudinal reversion — Test methods and specification,Tubes en polychlorure de vinyle (PVC) non plastifié —
• ISO 2505:200533601,IS,,ISO 2505:2005,Thermoplastics pipes — Longitudinal reversion — Test method and parameters,Tubes en matières thermoplastiques — Retrait longitudinal à chaud — Méthode d'ess
• ISO 2506:19817437,IS,,ISO 2506:1981,Polyethylene pipes (PE) — Longitudinal reversion — Test methods and specification,Tubes en polyéthylène (PE) — Retrait longitudinal à chaud — Méthodes d'essa
• ISO 2507-1:199520854,IS,,ISO 2507-1:1995,Thermoplastics pipes and fittings — Vicat softening temperature — Part 1: General test method,Tubes et raccords en matières thermoplastiques — Température
• ISO 2507-2:199520855,IS,,ISO 2507-2:1995,Thermoplastics pipes and fittings — Vicat softening temperature — Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated po
• ISO 2507-3:199520856,IS,,ISO 2507-3:1995,Thermoplastics pipes and fittings — Vicat softening temperature — Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styr
• ISO 2507:19827438,IS,,ISO 2507:1982,Unplasticized polyvinyl chloride (PVC) pipes and fittings — Vicat softening temperature — Test method and specification,Tubes et raccords en polychlorure de
• ISO 2509:19737440,IS,,ISO 2509:1973,Cork — Sound absorbing expanded pure agglomerated cork in tiles — Characteristics,Liège — Aggloméré expansé pur absorbant acoustique en dalles — Caractéristi
• ISO 2510:19737442,IS,,ISO 2510:1973,Cork — Sound absorbing composition cork in tiles — Characteristics,Liège — Aggloméré composé absorbant acoustique en dalles — Caractéristiques,1973-07-01,1,"
• ISO 2528:19747464,IS,,ISO 2528:1974,Sheet materials — Determination of water vapour transmission rate — Dish method,Produits en feuilles et en plaques — Détermination du coefficient de transmis
• ISO 2528:199520676,IS,,ISO 2528:1995,Sheet materials — Determination of water vapour transmission rate — Gravimetric (dish) method,Produits en feuilles — Détermination du coefficient de transmi
• ISO 2530:19757466,IS,,ISO 2530:1975,Keyboard for international information processing interchange using the ISO 7- bit coded character set — Alphanumeric area,Clavier pour échanges internationa
• ISO 2531:19797467,IS,,ISO 2531:1979,"Ductile iron pipes, fittings and accessories for pressure pipe-lines","Tuyaux, raccords et pièces accessoires en fonte ductile pour canalisations avec press
• ISO 2531:1979/Add 1:19807470,IS,Add,ISO 2531:1979/Add 1:1980,"Ductile iron pipes, fittings and accessories for pressure pipe-lines — Addendum 1","Tuyaux, raccords et pièces accessoires en fonte ductile po
• ISO 2531:19867468,IS,,ISO 2531:1986,"Ductile iron pipes, fittings and accessories for pressure pipelines","Tuyaux, raccords et pièces accessoires en fonte ductile pour canalisations avec pressi
• ISO 2531:19917469,IS,,ISO 2531:1991,"Ductile iron pipes, fittings and accessories for pressure pipelines","Tuyaux, raccords et pièces accessoires en fonte ductile pour canalisations avec pressi
• ISO 2531:199827385,IS,,ISO 2531:1998,"Ductile iron pipes, fittings, accessories and their joints for water or gas applications","Tuyaux, raccords et accessoires en fonte ductile et leurs assemb
• ISO 2534:19747475,IS,,ISO 2534:1974,Road vehicles — Engine test code — Gross power,Véhicules routiers — Code d'essai des moteurs — Puissance brute,1974-08-01,1,['43.060.01'],ISO/TC 22,9599,,[74
• ISO 2534:19987476,IS,,ISO 2534:1998,Road vehicles — Engine test code — Gross power,Véhicules routiers — Code d'essai des moteurs — Puissance brute,1998-08-27,2,['43.060.01'],ISO/TC 22/SC 34,959
• ISO 2535:19747477,IS,,ISO 2535:1974,Plastics — Unsaturated polyester resins — Measurement of gel time at 25 degrees C,Plastiques — Résines de polyesters non saturés — Mesurage de la durée de gé
• ISO 2535:199727070,IS,,ISO 2535:1997,Plastics — Unsaturated polyester resins — Measurement of gel time at 25 degrees C,Plastiques — Résines de polyesters non saturés — Mesurage du temps de géli
• ISO 2537:19857480,IS,,ISO 2537:1985,Liquid flow measurement in open channels — Cup-type and propeller-type current-meters,Mesure de débit des liquides dans les canaux découverts — Moulinets à c
• ISO 2537:1985/Amd 1:19837482,IS,Amd,ISO 2537:1985/Amd 1:1983,Liquid flow measurement in open channels — Cup-type and propeller-type current-meters — Amendment 1,Mesure de débit des liquides dans les canau
• ISO 2537:19887481,IS,,ISO 2537:1988,Liquid flow measurement in open channels — Rotating element current-meters,Mesure de débit des liquides dans les canaux découverts — Moulinets à élément rota
• ISO 2538:19747483,IS,,ISO 2538:1974,Limits and fits — Series of angles and slopes on wedges and prisms,Ajustements — Séries d'angles et d'inclinaisons de prismes,1974-04-01,1,['17.040.01'],ISO/
• ISO 2538:199828069,IS,,ISO 2538:1998,Geometrical Product Specifications (GPS) — Series of angles and slopes on prisms,Spécification géométrique des produits (GPS) — Séries d'angles et d'inclina
• ISO 2539:19747484,IS,,ISO 2539:1974,Withdrawal of ISO 2539-1974,Annulation de l'ISO 2539-1974,1974-07-01,1,['25.040.20'],ISO/IEC JTC 1,9599,,[13540],"['en','fr']",15
• ISO 2540:19737485,IS,,ISO 2540:1973,Centre drills for centre holes with protecting chamfer — Type B,Forets à centrer pour centres avec chanfrein de protection — Type B,1973-04-01,1,['25.100.30'
• ISO 2541:19727486,IS,,ISO 2541:1972,Centre drills for centre holes with radius form — Type R,Forets à centrer pour centres à profil curviligne — Type R,1972-12-01,1,['25.100.30'],ISO/TC 29/SC 9
• ISO 2542:19807487,IS,,ISO 2542:1980,Internal combustion engines — Spark plug ignition — Terminology,Moteurs à explosion — Allumage par bougies — Terminologie,1980-12-01,2,"['43.060.50','01.040.
• ISO 2548:19737494,IS,,ISO 2548:1973,"Centrifugal, mixed flow and axial pumps — Code for acceptance tests — Class C","Pompes centrifuges, hélico-centrifuges et hélicoïdes — Code d'essais de réce
• ISO 2551:19817498,IS,,ISO 2551:1981,Machine-made textile floor coverings — Determination of dimensional changes due to the effects of varied water and heat conditions,Revêtements de sol textile
• ISO 2553:19747499,IS,,ISO 2553:1974,Welds — Symbolic representation on drawings,Soudures — Représentation symbolique sur les dessins,1974-08-01,1,"['01.100.20','25.160.40']",ISO/TC 44,9599,,"[7
• ISO 2553:19847500,IS,,ISO 2553:1984,Welds — Symbolic representation on drawings,Soudures — Représentations symboliques sur les dessins,1984-12-01,2,"['01.100.20','25.160.40']",ISO/TC 44/SC 7,95
• ISO 2553:19927501,IS,,ISO 2553:1992,"Welded, brazed and soldered joints — Symbolic representation on drawings",Joints soudés et brasés — Représentations symboliques sur les dessins,1992-10-15,3
• ISO 2553:201342192,IS,,ISO 2553:2013,Welding and allied processes — Symbolic representation on drawings — Welded joints,Soudage et techniques connexes — Représentations symboliques sur les dess
• ISO 2554:19747502,IS,,ISO 2554:1974,Plastics — Unsaturated polyester resins — Determination of hydroxyl value,Plastiques — Résines de polyesters non saturés — Détermination de l'indice d'hydrox
• ISO 2555:19747503,IS,,ISO 2555:1974,Resins in the liquid state or as emulsions or dispersions — Determination of Brookfield RV viscosity,Résines à l'état liquide ou en émulsions ou dispersions
• ISO 2555:19897504,IS,,ISO 2555:1989,Plastics — Resins in the liquid state or as emulsions or dispersions — Determination of apparent viscosity by the Brookfield Test method,Plastiques — Résines
• ISO 2556:19747506,IS,,ISO 2556:1974,Plastics — Determination of the gas transmission rate of films and thin sheets under atmospheric pressure — Manometric method,"Matières plastiques — Détermin
• ISO 2557-1:19767508,IS,,ISO 2557-1:1976,Plastics — Amorphous thermoplastic moulding materials — Preparation of test specimens with a defined level of shrinkage — Part 1: Test specimens in the for
• ISO 2557-2:19797510,IS,,ISO 2557-2:1979,Plastics — Amorphous thermoplastic moulding materials — Preparation of test specimens with a defined level of shrinkage — Part 2: Test specimens in the for
• ISO 2557-2:19867511,IS,,ISO 2557-2:1986,Plastics — Amorphous thermoplastics — Preparation of test specimens with a specified reversion — Part 2: Plates,Plastiques — Thermoplastiques amorphes — Pr
• ISO 2558:19747512,IS,,ISO 2558:1974,Textile glass chopped-strand mats for reinforcement of plastics — Determination of time of dissolution of the binder in styrene,Mats de verre textile à fils
• ISO 2559:19807513,IS,,ISO 2559:1980,Textile glass — Mats (made from chopped or continuous strands) — Basis for a specification,"Verre textile — Mats (constitués de fils de base, coupés ou non)
• ISO 2559:19917514,IS,,ISO 2559:1991,Textile glass — Mats (made from chopped or continuous strands) — Basis for a specification,"Verre textile — Mats (constitués de fils de base, coupés ou non)
• ISO 2559:200028175,IS,,ISO 2559:2000,Textile glass — Mats (made from chopped or continuous strands) — Designation and basis for specifications,"Verre textile — Mats (constitués de fils de base,
• ISO 2560:19737515,IS,,ISO 2560:1973,Covered electrodes for manual arc welding of mild steel and low alloy steel — Code of symbols for identification,Électrodes enrobées pour le soudage manuel à
• ISO 2560:200235626,IS,,ISO 2560:2002,Welding consumables — Covered electrodes for manual metal arc welding of non-alloy and fine grain steels — Classification,Produits consommables pour le soud
• ISO 2560:200945947,IS,,ISO 2560:2009,Welding consumables — Covered electrodes for manual metal arc welding of non-alloy and fine grain steels — Classification,Produits consommables pour le soud
• ISO 2561:19747518,IS,,ISO 2561:1974,Plastics — Determination of residual styrene monomer in polystyrene by gas chromatography,Matières plastiques — Détermination du styrène monomère résiduel da
• ISO 2561:200634833,IS,,ISO 2561:2006,Plastics — Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography,Plastiques — Détermin
• ISO 2561:201255457,IS,,ISO 2561:2012,Plastics — Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography,Plastiques — Détermin
• ISO 2563:19747522,IS,,ISO 2563:1974,Aircraft ducting and piping — Profile dimensions for flanges of V-band couplings,Canalisations et tuyauteries à bord des aéronefs — Dimensions d'encombrement
• ISO 2566-1:19737523,IS,,ISO 2566-1:1973,Steel — Conversion of elongation values — Part 1: Carbon and low alloy steels,Acier — Conversion des valeurs d'allongement — Partie 1: Aciers au carbone et
• ISO 2566-1:19847524,IS,,ISO 2566-1:1984,Steel — Conversion of elongation values — Part 1: Carbon and low alloy steels,Acier — Conversion des valeurs d'allongement — Partie 1: Aciers au carbone et
• ISO 2566-2:19847525,IS,,ISO 2566-2:1984,Steel — Conversion of elongation values — Part 2: Austenitic steels,Acier — Conversion des valeurs d'allongement — Partie 2: Aciers austénitiques,1984-08-0
• ISO 2568:19737526,IS,,ISO 2568:1973,Hand- and machine-operated circular screwing dies and hand-operated die stocks,"Filières rondes de filetage, à main et à machine, et porte-filière à main",19
• ISO 2568:1973/Amd 1:19777528,IS,Amd,ISO 2568:1973/Amd 1:1977,Hand- and machine-operated circular screwing dies and hand-operated die stocks — Amendment 1,"Filières rondes de filetage, à main et à machine,
• ISO 2568:1973/Amd 2:19837529,IS,Amd,ISO 2568:1973/Amd 2:1983,Hand- and machine-operated circular screwing dies and hand-operated die stocks — Amendment 2,"Filières rondes de filetage, à main et à machine,
• ISO 2569:19737530,IS,,ISO 2569:1973,Cork stoppers — Classification and characteristics,Bouchons de liège — Classification et caractéristiques générales,1973-07-01,1,"['55.100','79.100']",ISO/TC
• ISO 2569:19857531,IS,,ISO 2569:1985,Cork stoppers — Types and general characteristics,Bouchons de liège — Types et caractéristiques générales,1985-10-31,2,"['79.100','55.100']",ISO/TC 87,9599,[
• ISO 2574:19747535,IS,,ISO 2574:1974,Aircraft — Electrical cables — Identification,Aéronefs — Câbles électriques — Marquage,1974-11-01,1,['49.060'],ISO/TC 20/SC 1,9599,,[7536],"['en','fr']",1
• ISO 2575:19827537,IS,,ISO 2575:1982,"Road vehicles — Symbols for controls, indicators and tell-tales","Véhicules routiers — Symboles pour les commandes, indicateurs et témoins",1982-11-01,4,"['
• ISO 2575:1982/Amd 1:19947539,IS,Amd,ISO 2575:1982/Amd 1:1994,"Road vehicles — Symbols for controls, indicators and tell-tales — Amendment 1","Véhicules routiers — Symboles pour les commandes, indicateurs
• ISO 2575:199522722,IS,,ISO 2575:1995,"Road vehicles — Symbols for controls, indicators and tell-tales","Véhicules routiers — Symboles pour les commandes, indicateurs et témoins",1995-11-23,5,"[
• ISO 2575:1995/Amd 1:199827927,IS,Amd,ISO 2575:1995/Amd 1:1998,"Road vehicles — Symbols for controls, indicators and tell-tales — Amendment 1: Child seat prohibition","Véhicules routiers — Symboles pour le
• ISO 2575:200031253,IS,,ISO 2575:2000,"Road vehicles — Symbols for controls, indicators and tell-tales","Véhicules routiers — Symboles pour les commandes, indicateurs et témoins",2000-04-06,6,"[
• ISO 2575:2000/Amd 1:200131361,IS,Amd,ISO 2575:2000/Amd 1:2001,"Road vehicles — Symbols for controls, indicators and tell-tales — Amendment 1","Véhicules routiers — Symboles pour les commandes, indicateurs
• ISO 2575:2000/Amd 4:200133021,IS,Amd,ISO 2575:2000/Amd 4:2001,"Road vehicles — Symbols for controls, indicators and tell-tales — Amendment 4","Véhicules routiers — Symboles pour les commandes, indicateurs
• ISO 2575:2000/Cor 1:200134429,IS,Cor,ISO 2575:2000/Cor 1:2001,"Road vehicles — Symbols for controls, indicators and tell-tales — Technical Corrigendum 1","Véhicules routiers — Symboles pour les commandes,
• ISO 2575:200439704,IS,,ISO 2575:2004,"Road vehicles — Symbols for controls, indicators and tell-tales","Véhicules routiers — Symboles pour les commandes, indicateurs et témoins",2004-05-28,7,"[
• ISO 2575:2004/Amd 1:200539705,IS,Amd,ISO 2575:2004/Amd 1:2005,"Road vehicles — Symbols for controls, indicators and tell-tales — Amendment 1","Véhicules routiers — Symboles pour les commandes, indicateurs
• ISO 2575:2004/Amd 2:200640672,IS,Amd,ISO 2575:2004/Amd 2:2006,"Road vehicles — Symbols for controls, indicators and tell-tales — Amendment 2","Véhicules routiers — Symboles pour les commandes, indicateurs
• ISO 2575:2004/Amd 3:200851258,IS,Amd,ISO 2575:2004/Amd 3:2008,"Road vehicles — Symbols for controls, indicators and tell-tales — Amendment 3","Véhicules routiers — Symboles pour les commandes, indicateurs
• ISO 2575:2004/Amd 4:200943953,IS,Amd,ISO 2575:2004/Amd 4:2009,"Road vehicles — Symbols for controls, indicators and tell-tales — Amendment 4","Véhicules routiers — Symboles pour les commandes, indicateurs
• ISO 2575:201054513,IS,,ISO 2575:2010,"Road vehicles — Symbols for controls, indicators and tell-tales","Véhicules routiers — Symboles pour les commandes, indicateurs et témoins",2010-07-01,8,"[
• ISO 2575:2010/Amd 1:201155224,IS,Amd,ISO 2575:2010/Amd 1:2011,"Road vehicles — Symbols for controls, indicators and tell-tales — Amendment 1","Véhicules routiers — Symboles pour les commandes, indicateurs
• ISO 2575:2010/Amd 3:201457913,IS,Amd,ISO 2575:2010/Amd 3:2014,"Road vehicles — Symbols for controls, indicators and tell-tales — Amendment 3","Véhicules routiers — Symboles pour les commandes, indicateurs
• ISO 2575:2010/Amd 5:201665518,IS,Amd,ISO 2575:2010/Amd 5:2016,"Road vehicles — Symbols for controls, indicators and tell-tales — Amendment 5","Véhicules routiers — Symboles pour les commandes, indicateurs
• ISO 2575:2010/Amd 6:201771504,IS,Amd,ISO 2575:2010/Amd 6:2017,"Road vehicles — Symbols for controls, indicators and tell-tales — Amendment 6","Véhicules routiers — Symboles pour les commandes, indicateurs
• ISO 2575:2010/Amd 7:201771505,IS,Amd,ISO 2575:2010/Amd 7:2017,"Road vehicles — Symbols for controls, indicators and tell-tales — Amendment 7","Véhicules routiers — Symboles pour les commandes, indicateurs
• ISO 2577:19757544,IS,,ISO 2577:1975,Plastics — Thermosetting moulding materials — Determination of shrinkage of compression moulded test specimens in the form of bars,Matières plastiques — Mati
• ISO 2577:19847545,IS,,ISO 2577:1984,Plastics — Thermosetting moulding materials — Determination of shrinkage,Plastiques — Matières à mouler thermodurcissables — Détermination du retrait,1984-12
• ISO 2578:19747546,IS,,ISO 2578:1974,Plastics — Determination of time-temperature limits after exposure to prolonged action of heat,Matières plastiques — Détermination des limites temps-températ
• ISO 2580-1:19787549,IS,,ISO 2580-1:1978,Plastics — Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials — Part 1: Designation,"Plastiques — Plastiques à base d'acrylonitrile-but
• ISO 2580-1:19907550,IS,,ISO 2580-1:1990,Plastics — Acrylonitrile/butadiene/styrene (ABS) moulding and extrusion materials — Part 1: Designation,Plastiques — Plastiques à base d'acrylonitrile/buta
• ISO 2580-1:199727333,IS,,ISO 2580-1:1997,Plastics — Acrylonitrile/butadiene/styrene (ABS) moulding and extrusion materials — Part 1: Designation system and basis for specifications,Plastiques — A
• ISO 2580-1:200028378,IS,,ISO 2580-1:2000,Plastics — Acrylonitrile/butadiene/styrene (ABS) moulding and extrusion materials — Part 1: Designation system and basis for specifications,Plastiques — A
• ISO 2580-1:200233996,IS,,ISO 2580-1:2002,Plastics — Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials — Part 1: Designation system and basis for specifications,Plastiques — A
• ISO 2580-2:19827551,IS,,ISO 2580-2:1982,Plastics — Acrylonitrile/butadiene/styrene (ABS) moulding and extrusion materials — Part 2: Determination of properties,Plastiques — Plastiques à base d'ac
• ISO 2580-2:19947552,IS,,ISO 2580-2:1994,Plastics — Acrylonitrile/butadiene/styrene (ABS) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties,P
• ISO 2580-2:200333333,IS,,ISO 2580-2:2003,Plastics — Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties,
• ISO 2581:19757554,IS,,ISO 2581:1975,Rigid cellular plastics — Determination of apparent thermal conductivity by means of a heat-flow meter,Plastiques alvéolaires rigides — Détermination de la c
• ISO 2582:19787555,IS,,ISO 2582:1978,Cork and cork products — Determination of thermal conductivity — Hot plate method,Liège et produits en liège — Détermination de la conductivité thermique — M
• ISO 2583:19727557,IS,,ISO 2583:1972,Tool shanks and equipment with 7/24 tapers — Collar dimensions,Queues d'outils et d'équipements aux cônes à conicité 7/24 — Dimensions de la collerette,1972-
• ISO 2584:19727558,IS,,ISO 2584:1972,Cylindrical cutters with plain bore and key drive — Metric series,"Fraises cylindriques 1 taille, à surfacer, à alésage lisse, à entraînement par clavette —
• ISO 2586:19737560,IS,,ISO 2586:1973,Shell end mills with plain bore and tenon drive — Metric series,"Fraises cylindriques 2 tailles, à alésage lisse, à entraînement par tenons — Série métrique"
• ISO 2588:19857564,IS,,ISO 2588:1985,Leather — Sampling — Number of items for a gross sample,Cuir — Échantillonnage — Nombre d'unités élémentaires de l'échantillon global,1985-05-09,2,['59.140.3
• ISO 2589:19727565,IS,,ISO 2589:1972,Leather — Physical testing — Measurement of thickness,Cuir — Essais physiques — Mesurage de l'épaisseur,1972-12-01,1,['59.140.30'],IULTCS,9599,,[31147],"['en
• ISO 2589:200231147,IS,,ISO 2589:2002,Leather — Physical and mechanical tests — Determination of thickness,Cuir — Essais physiques et mécaniques — Détermination de l'épaisseur,2002-12-05,2,['59.
• ISO 2590:19737567,IS,,ISO 2590:1973,General method for the determination of arsenic — Silver diethyldithiocarbamate photometric method,Méthode générale de dosage de l'arsenic — Méthode photomét
• ISO 2591:19737568,IS,,ISO 2591:1973,Test sieving,Tamisage de contrôle,1973-05-01,1,['19.120'],ISO/TC 24,9599,,[7569],"['en','fr']",11
• ISO 2592:19737571,IS,,ISO 2592:1973,Petroleum products — Determination of flash and fire points — Cleveland open cup method,Produits pétroliers — Détermination des points d'éclair et de feu — M
• ISO 2592:200022057,IS,,ISO 2592:2000,Determination of flash and fire points — Cleveland open cup method,Détermination des points d'éclair et de feu — Méthode Cleveland à vase ouvert,2000-09-07,
• ISO 2593:19847572,IS,,ISO 2593:1984,Data communication — 34 pin DTE/DCE interface connector and pin assignments,Transmission des données — Connecteur d'interface ETTD/ETCD à 34 broches et affec
• ISO 2594:19727574,IS,,ISO 2594:1972,Building drawings — Projection methods,Dessin de bâtiment — Méthodes de projection,1972-09-01,1,['01.100.30'],ISO/TC 10/SC 8,9599,,[63794],"['en','fr']",2
• ISO 2595:19737575,IS,,ISO 2595:1973,Building drawings — Dimensioning of production drawings — Representation of manufacturing and work sizes,Dessins de bâtiment — Cotation des dessins d'exécuti
• ISO 2596:19807576,IS,,ISO 2596:1980,Iron ores — Determination of hygroscopic moisture in analytical samples,Minerais de fer — Détermination de l'humidité des échantillons pour analyse,1980-06-0
• ISO 2596:19847577,IS,,ISO 2596:1984,Iron ores — Determination of hygroscopic moisture in analytical samples — Gravimetric and Karl Fischer methods,Minerais de fer — Détermination de l'humidité
• ISO 2596:19947578,IS,,ISO 2596:1994,Iron ores — Determination of hygroscopic moisture in analytical samples — Gravimetric and Karl Fischer methods,Minerais de fer — Détermination de l'humidité
• ISO 2597-1:19947581,IS,,ISO 2597-1:1994,Iron ores — Determination of total iron content — Part 1: Titrimetric method after tin(II) chloride reduction,Minerais de fer — Dosage du fer total — Parti
• ISO 2597-2:200843731,IS,,ISO 2597-2:2008,Iron ores — Determination of total iron content — Part 2: Titrimetric methods after titanium(III) chloride reduction,Minerais de fer — Dosage du fer total
• ISO 2597-2:201562278,IS,,ISO 2597-2:2015,Iron ores — Determination of total iron content — Part 2: Titrimetric methods after titanium(III) chloride reduction,Minerais de fer — Dosage du fer total
• ISO 2597:19737579,IS,,ISO 2597:1973,Iron ores — Determination of total iron content — Volumetric method,Minerais de fer — Dosage du fer total — Méthode volumétrique,1973-05-01,1,['73.060.10'],I
• ISO 2597:19857580,IS,,ISO 2597:1985,Iron ores — Determination of total iron content — Titrimetric methods,Minerais de fer — Dosage du fer total — Méthodes titrimétriques,1985-11-14,2,['73.060']
• ISO 2598:19807582,IS,,ISO 2598:1980,Iron ores — Determination of silicon content — Gravimetric methods,Minerais de fer — Dosage du silicium — Méthodes gravimétriques,1980-02-01,1,['73.060.10'],
• ISO 2599:19837584,IS,,ISO 2599:1983,Iron ores — Determination of phosphorus content — Titrimetric method,Minerais de fer — Dosage du phosphore — Méthode titrimétrique,1983-11-01,2,['73.060.10']
• ISO 2603:19837586,IS,,ISO 2603:1983,Booths for simultaneous interpretation — General characteristics and equipment,Cabines d'interprétation simultanée — Caractéristiques générales et équipement
• ISO 2603:19987587,IS,,ISO 2603:1998,Booths for simultaneous interpretation — General characteristics and equipment,Cabines d'interprétation simultanée — Caractéristiques générales et équipement
• ISO 2603:201667065,IS,,ISO 2603:2016,Simultaneous interpreting — Permanent booths — Requirements,Interprétation simultanée — Cabines permanentes — Exigences,2016-12-02,4,['91.040.10'],ISO/TC 37
• ISO 2604-1:19757588,IS,,ISO 2604-1:1975,Steel products for pressure purposes — Quality requirements — Part 1: Forgings,Produits en acier pour appareils à pression — Spécifications de qualité — Pa
• ISO 2604-2:19757589,IS,,ISO 2604-2:1975,Steel products for pressure purposes — Quality requirements — Part 2: Wrought seamless tubes,Produits en acier pour appareils à pression — Spécifications d
• ISO 2604-3:19757590,IS,,ISO 2604-3:1975,Steel products for pressure purposes — Quality requirements — Part 3: Electric resistance and induction-welded tubes,Produits en acier pour appareils à pre
• ISO 2604-4:19757592,IS,,ISO 2604-4:1975,Steel products for pressure purposes — Quality requirements — Part 4: Plates,Produits en acier pour appareils à pression — Spécifications de qualité — Part
• ISO 2604-5:19787593,IS,,ISO 2604-5:1978,Steel products for pressure purposes — Quality requirements — Part 5: Longitudinally welded austenitic stainless steel tubes,Produits en acier pour apparei
• ISO 2604-6:19787594,IS,,ISO 2604-6:1978,Steel products for pressure purposes — Quality requirements — Part 6: Submerged arc longitudinally or spirally welded steel tubes,Produits en acier pour ap
• ISO 2604-8:19857596,IS,,ISO 2604-8:1985,Steel products for pressure purposes — Quality requirements — Part 8: Plates of weldable fine grain steels with high proof stress supplied in the normalize
• ISO 2624:19737600,IS,,ISO 2624:1973,Copper and copper alloys — Estimation of average grain size,Cuivre et alliages de cuivre — Évaluation de la dimension moyenne du grain,1973-09-01,1,['77.040.
• ISO 2625:19737602,IS,,ISO 2625:1973,Copper and copper alloys — Reverse bend testing of wire,Cuivre et alliages de cuivre — Essai de pliages alternés du fil,1973-11-01,1,"['77.040.10','77.150.30
• ISO 2627:19737604,IS,,ISO 2627:1973,Copper and copper alloys — Simple torsion testing of wire,Cuivre et alliages de cuivre — Essai de torsion simple des fils,1973-10-01,1,"['77.040.10','77.150.
• ISO 2631-1:19857611,IS,,ISO 2631-1:1985,Evaluation of human exposure to whole-body vibration — Part 1: General requirements,Estimation de l'exposition des individus à des vibrations globales du c
• ISO 2631-2:19897613,IS,,ISO 2631-2:1989,Evaluation of human exposure to whole-body vibration — Part 2: Continuous and shock-induced vibrations in buildings (1 to 80 Hz),Estimation de l'exposition
• ISO 2631-2:200323012,IS,,ISO 2631-2:2003,Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 2: Vibration in buildings (1 Hz to 80 Hz),Vibrations et chocs
• ISO 2631-3:19857615,IS,,ISO 2631-3:1985,"Evaluation of human exposure to whole-body vibration — Part 3: Evaluation of exposure to whole-body z-axis vertical vibration in the frequency range 0,1 t

← records 2,401–2,800 · All of Withdrawn and superseded ISO standards · records 3,201 on →