Records 3,201–3,600 — Withdrawn and superseded ISO standards

Records 3,201 to 3,600 of 24,640. Each links to its own page, which carries the source URL and the quoted line that states the value.

• ISO 2631-5:200435595,IS,,ISO 2631-5:2004,Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 5: Method for evaluation of vibration containing multiple sho
• ISO 2631:19787608,IS,,ISO 2631:1978,Guide for the evaluation of human exposure to whole-body vibration,Guide pour l'estimation de l'exposition des individus à des vibrations globales du corps,1
• ISO 2631:1978/Add 2:19827609,IS,Add,ISO 2631:1978/Add 2:1982,Guide for the evaluation of human exposure to whole-body vibration — Addendum 2,Guide pour l'estimation de l'exposition des individus à des vib
• ISO 2631:1978/Amd 1:19827610,IS,Amd,ISO 2631:1978/Amd 1:1982,Guide for the evaluation of human exposure to whole-body vibration — Amendment 1,Guide pour l'estimation de l'exposition des individus à des vi
• ISO 2632-1:19757618,IS,,ISO 2632-1:1975,"Roughness comparison specimens — Part 1: Turned, ground, bored, milled, shaped and planed","Échantillons de comparaison viso-tactile de rugosité — Partie
• ISO 2632-1:19857619,IS,,ISO 2632-1:1985,"Roughness comparison specimens — Part 1: Turned, ground, bored, milled, shaped and planed","Échantillons de comparaison viso-tactile de rugosité — Partie
• ISO 2632-2:19777620,IS,,ISO 2632-2:1977,"Roughness comparison specimens — Part 2: Spark-eroded, shot blasted and grit blasted, and polished","Échantillons de comparaison viso-tactile de regosité
• ISO 2632-3:19797622,IS,,ISO 2632-3:1979,Roughness comparison specimens — Part 3: Cast surfaces,Échantillons de comparaison viso-tactile de rugosité — Partie 3: Surfaces moulées,1979-07-01,1,['17.
• ISO 2635:19797624,IS,,ISO 2635:1979,Aircraft — Conductors for general purpose aircraft electrical cables and aerospace applications — Dimensions and characteristics,Aéronefs — Conducteurs pour
• ISO 2636:19737626,IS,,ISO 2636:1973,Information processing — Conventions for incorporating flowchart symbols in flowcharts,Traitement de l'information — Conventions relatives à la disposition d
• ISO 2637:19737627,IS,,ISO 2637:1973,Aluminium and its alloys — Determination of zinc — Atomic absorption method,Analyse chimique de l'aluminium et de ses alliages — Dosage du zinc — Méthode par
• ISO 2639:19827628,IS,,ISO 2639:1982,Steel — Determination and verification of the effective depth of carburized and hardened cases,Acier — Détermination et vérification de la profondeur convent
• ISO 2639:200230695,IS,,ISO 2639:2002,Steels — Determination and verification of the depth of carburized and hardened cases,Acier — Détermination et vérification de la profondeur de cémentation,
• ISO 2645:19757630,IS,,ISO 2645:1975,Materials and equipment for petroleum and natural gas industries — Casing and tubing for oil or natural gas wells,Matériel d'équipement pour les industries d
• ISO 2647:19737632,IS,,ISO 2647:1973,Wool — Determination of percentage of medullated fibres by the projection microscope,"Laine — Détermination du pourcentage de fibres médullées, au moyen du m
• ISO 2648:19747633,IS,,ISO 2648:1974,Wool — Determination of fibre length distribution parameters — Electronic method,Laine — Détermination des paramètres de distribution de longueur des fibres
• ISO 2649:19747634,IS,,ISO 2649:1974,"Wool — Determination of short-term irregularity of linear density of slivers, rovings and yarns, by means of an electronic evenness tester","Laine — Détermi
• ISO 2650:19747635,IS,,ISO 2650:1974,Withdrawal of ISO 2650-1974,Annulation de l'ISO 2650-1974,1974-03-01,1,['49.020'],ISO/TC 20,9599,,[13727],['en'],2
• ISO 2653-1:19757636,IS,,ISO 2653-1:1975,Environmental tests for aircraft equipment — Part 1: Ice formation,Essais en environnement pour les équipements aéronautiques — Partie 1: Formation de glac
• ISO 2655:19757637,IS,,ISO 2655:1975,Withdrawal of ISO 2655-1975,Annulation de l'ISO 2655-1975,1975-07-01,1,['49.020'],ISO/TC 20,9599,,[13727],['en'],5
• ISO 2657:19767638,IS,,ISO 2657:1976,Withdrawal of ISO 2657-1976,Annulation de l'ISO 2657-1976,1976-09-01,1,['49.020'],ISO/TC 20,9599,,[13727],['en'],5
• ISO 2658:19757639,IS,,ISO 2658:1975,Withdrawal of ISO 2658-1975,Annulation de l'ISO 2658-1975,1975-07-01,1,['49.020'],ISO/TC 20,9599,,[13727],['en'],1
• ISO 2669-1:19787640,IS,,ISO 2669-1:1978,Environmental tests for aircraft equipment — Part 1: Steady state acceleration,Essais en environnement pour les équipements aéronautiques — Partie 1: Essai
• ISO 2676:19757643,IS,,ISO 2676:1975,Withdrawal of ISO 2676-1975,Annulation de l'ISO 2676-1975,1975-08-01,1,['49.020'],ISO/TC 20,9599,,[13727],['en'],2
• ISO 2678-1:19777644,IS,,ISO 2678-1:1977,Environmental tests for aircraft equipment — Part 1: Insulation resistance and high voltage tests for electrical equipment,Essais en environnement pour les
• ISO 2684:19757647,IS,,ISO 2684:1975,Withdrawal of ISO 2684-1975,Annulation de l'ISO 2684-1975,1975-11-01,1,['49.020'],ISO/TC 20,9599,,[13727],['en'],3
• ISO 2685:19927649,IS,,ISO 2685:1992,Aircraft — Environmental conditions and test procedures for airborne equipment — Resistance to fire in designated fire zones,Aéronautique — Conditions et mét
• ISO 2691:19737651,IS,,ISO 2691:1973,Photography — Expendable photoflash lamps — Definitions and requirements for luminous flux/time characteristics,Photographie — Lampes à éclairs à combustion
• ISO 2692:19887653,IS,,ISO 2692:1988,Technical drawings — Geometrical tolerancing — Maximum material principle,Dessins techniques — Tolérancement géométrique — Principe du maximum de matière,198
• ISO 2692:1988/Amd 1:19927655,IS,Amd,ISO 2692:1988/Amd 1:1992,Technical drawings — Geometrical tolerancing — Maximum material principle — Amendment 1: Least material requirement,Dessins techniques — Toléra
• ISO 2692:200643445,IS,,ISO 2692:2006,"Geometrical product specifications (GPS) — Geometrical tolerancing — Maximum material requirement (MMR), least material requirement (LMR) and reciprocity r
• ISO 2692:201460775,IS,,ISO 2692:2014,"Geometrical product specifications (GPS) — Geometrical tolerancing — Maximum material requirement (MMR), least material requirement (LMR) and reciprocity r
• ISO 2697:19747659,IS,,ISO 2697:1974,Road vehicles — Fuel injection nozzles — Size 'S',Véhicules routiers — Injecteurs — Taille 'S',1974-04-01,1,['43.060.40'],ISO/TC 22,9599,,[30214],"['en','fr'
• ISO 2698:19747660,IS,,ISO 2698:1974,Diesel engines — Injection nozzle holder — Type 7,Moteurs Diesel — Porte-injecteur type 7,1974-02-01,1,['43.060.40'],ISO/TC 22,9599,,[7661],"['en','fr']",2
• ISO 2698:19937661,IS,,ISO 2698:1993,"Diesel engines — Clamp-mounted fuel injectors, types 7 and 28","Moteurs à allumage par compression — Porte-injecteurs de combustible complets à fixation par
• ISO 2698:201359866,IS,,ISO 2698:2013,"Diesel engines — Clamp-mounted fuel injectors, types 7 and 28","Moteurs à allumage par compression — Porte-injecteurs de combustible complets à fixation pa
• ISO 2699:19837662,IS,,ISO 2699:1983,"Road vehicles — Flange-mounted injection nozzle holders size 'S' — Types 2, 3, 4, 5 and 6","Véhicules routiers — Porte-injecteurs à bride de taille 'S' — Ty
• ISO 2702:19747665,IS,,ISO 2702:1974,Heat-treated steel tapping screws — Mechanical properties,Vis à tôle en acier traité thermiquement — Caractéristiques mécaniques,1974-08-01,1,['21.060.10'],I
• ISO 2702:19927666,IS,,ISO 2702:1992,Heat-treated steel tapping screws — Mechanical properties,Vis à tôle en acier traité thermiquement — Caractéristiques mécaniques,1992-03-25,2,['21.060.10'],I
• ISO 2702:201154044,IS,,ISO 2702:2011,Heat-treated steel tapping screws — Mechanical properties,Vis à tôle en acier traité thermiquement — Caractéristiques mécaniques,2011-04-20,3,['21.060.10'],
• ISO 2704:19827668,IS,,ISO 2704:1982,Road vehicles — Spark plugs M 10 x 1 with flat seating and their cylinder head housing,Véhicules routiers — Bougies d'allumage M 10 x 1 à siège plat et leur
• ISO 2704:19937669,IS,,ISO 2704:1993,Road vehicles — M10 x 1 spark-plugs with flat seating and their cylinder head housing,Véhicules routiers — Bougies d'allumage M10 x 1 à siège plat et leur lo
• ISO 2705:19827670,IS,,ISO 2705:1982,"Road vehicles — Spark plugs M 12 x 1,25 with flat seating and their cylinder head housing","Véhicules routiers — Bougies d'allumage M 12 x 1,25 à siège plat
• ISO 2705:19917671,IS,,ISO 2705:1991,"Road vehicles — M12 x 1,25 spark-plugs with flat seating and their cylinder head housing","Véhicules routiers — Bougies d'allumage M12 x 1,25 à siège plat e
• ISO 2705:199928663,IS,,ISO 2705:1999,"Road vehicles — M12 x 1,25 spark-plugs with flat seating and their cylinder head housings","Véhicules routiers — Bougies d'allumage M12 x 1,25 à siège plat
• ISO 2707:19807672,IS,,ISO 2707:1980,Micrographics — Transparent A6 size microfiche of uniform division — Image arrangements No. 1 and No. 2,Micrographie — Microfiche transparente de format A6 à
• ISO 2708:19807673,IS,,ISO 2708:1980,Micrographics — Transparent A6 size microfiche of variable division — Image arrangements A and B,Micrographie — Microfiche transparente de format A6 à partit
• ISO 2709:19817674,IS,,ISO 2709:1981,Documentation — Format for bibliographic information interchange on magnetic tape,Documentation — Disposition des données sur bande magnétique pour l'échange
• ISO 2709:19967675,IS,,ISO 2709:1996,Information and documentation — Format for information exchange,Information et documentation — Format pour l'échange d'information,1996-08-15,3,['35.240.30']
• ISO 2710-1:20007677,IS,,ISO 2710-1:2000,Reciprocating internal combustion engines — Vocabulary — Part 1: Terms for engine design and operation,Moteurs alternatifs à combustion interne — Vocabulai
• ISO 2710-1:201770032,IS,,ISO 2710-1:2017,Reciprocating internal combustion engines — Vocabulary — Part 1: Terms for engine design and operation,Moteurs alternatifs à combustion interne — Vocabula
• ISO 2710-2:199921934,IS,,ISO 2710-2:1999,Reciprocating internal combustion engines — Vocabulary — Part 2: Terms for engine maintenance,Moteurs alternatifs à combustion interne — Vocabulaire — Par
• ISO 2710:19787676,IS,,ISO 2710:1978,Reciprocating internal combustion engines — Vocabulary,Moteurs alternatifs à combustion interne — Vocabulaire,1978-06-01,2,"['01.040.27','27.020']",ISO/TC 70
• ISO 2711:19737679,IS,,ISO 2711:1973,Information processing interchange — Representation of ordinal dates,Échange de données entre matériels de traitement de l'information — Représentation des d
• ISO 2712:19737680,IS,,ISO 2712:1973,Copper and copper alloys — Rockwell superficial hardness test (N and T scales),Cuivre et alliages de cuivre — Essai Rockwell de dureté superficielle (Échelle
• ISO 2713:19737681,IS,,ISO 2713:1973,"Copper and copper alloys — Rockwell hardness test (B, F and G scales)","Cuivre et alliages de cuivre — Essai de dureté Rockwell (Échelles B, F, G)",1973-11-
• ISO 2714:19807682,IS,,ISO 2714:1980,Liquid hydrocarbons — Volumetric measurement by displacement meter systems other than dispensing pumps,Hydrocarbures liquides — Mesurage volumétrique au moye
• ISO 2715:19817683,IS,,ISO 2715:1981,Liquid hydrocarbons — Volumetric measurement by turbine meter systems,Hydrocarbures liquides — Mesurage volumétrique au moyen de compteurs à turbine,1981-08-
• ISO 2716:19727685,IS,,ISO 2716:1972,Withdrawal of ISO 2716-1972,Annulation de l'ISO 2716-1972,1972-12-01,1,['55.180.10'],ISO/TC 104,9599,,[12648],['en'],11
• ISO 2719:19737688,IS,,ISO 2719:1973,Petroleum products — Determination of flash point — Pensky-Martens closed cup method,Produits pétroliers — Détermination du point d'éclair — Méthode Pensky-M
• ISO 2719:19887689,IS,,ISO 2719:1988,Petroleum products and lubricants — Determination of flash point — Pensky-Martens closed cup method,Produits pétroliers et lubrifiants — Détermination du poi
• ISO 2719:200236614,IS,,ISO 2719:2002,Determination of flash point — Pensky-Martens closed cup method,Détermination du point d'éclair — Méthode Pensky-Martens en vase clos,2002-11-15,3,['75.080'
• ISO 2719:201662263,IS,,ISO 2719:2016,Determination of flash point — Pensky-Martens closed cup method,Détermination du point d'éclair — Méthode Pensky-Martens en vase clos,2016-06-16,4,['75.080'
• ISO 2719:2016/Amd 1:202179763,IS,Amd,ISO 2719:2016/Amd 1:2021,Determination of flash point — Pensky-Martens closed cup method — Amendment 1: Thermometers correction,Détermination du point d'éclair — Métho
• ISO 2721:19827692,IS,,ISO 2721:1982,Photography — Cameras — Automatic controls of exposure,Photographie — Appareils de prise de vues — Commandes automatiques de l'exposition,1982-12-01,1,['37.0
• ISO 2722:19737693,IS,,ISO 2722:1973,Vitreous and porcelain enamels — Determination of resistance to citric acid at room temperature,"Émaux vitrifiés — Détermination de la résistance à l'acide c
• ISO 2722:19971463,IS,,ISO 2722:1997,Vitreous and porcelain enamels — Determination of resistance to citric acid at room temperature,Émaux vitrifiés — Détermination de la résistance à l'acide ci
• ISO 2723:19737694,IS,,ISO 2723:1973,Vitreous and porcelain enamels for sheet steel — Production of specimens for testing,Émaux vitrifiés pour tôle d'acier — Fabrication des échantillons pour es
• ISO 2723:19951427,IS,,ISO 2723:1995,Vitreous and porcelain enamels for sheet steel — Production of specimens for testing,Émaux vitrifiés pour tôles d'acier — Fabrication des échantillons pour e
• ISO 2724:19737695,IS,,ISO 2724:1973,Vitreous and porcelain enamels for cast iron — Production of specimens for testing,Émaux vitrifiés pour fonte — Fabrication des échantillons pour essai,1973-
• ISO 2725-1:199625263,IS,,ISO 2725-1:1996,Assembly tools for screws and nuts — Square drive sockets — Part 1: Hand-operated sockets — Dimensions,Outils de manoeuvre pour vis et écrous — Douilles à
• ISO 2725-1:200737554,IS,,ISO 2725-1:2007,Assembly tools for screws and nuts — Square drive sockets — Part 1: Hand-operated sockets,Outils de manoeuvre pour vis et écrous — Douilles à carré conduc
• ISO 2725-1:201563677,IS,,ISO 2725-1:2015,Assembly tools for screws and nuts — Square drive sockets — Part 1: Hand-operated sockets,Outils de manoeuvre pour vis et écrous — Douilles à carré conduc
• ISO 2725-2:199625264,IS,,ISO 2725-2:1996,Assembly tools for screws and nuts — Square drive sockets — Part 2: Machine-operated sockets ('impact') — Dimensions,Outils de manoeuvre pour vis et écrou
• ISO 2725-2:200740051,IS,,ISO 2725-2:2007,Assembly tools for screws and nuts — Square drive sockets — Part 2: Machine-operated sockets ('impact'),Outils de manoeuvre pour vis et écrous — Douilles
• ISO 2725-2:201563678,IS,,ISO 2725-2:2015,Assembly tools for screws and nuts — Square drive sockets — Part 2: Machine-operated sockets ('impact'),Outils de manoeuvre pour vis et écrous — Douilles
• ISO 2725-3:200128550,IS,,ISO 2725-3:2001,Assembly tools for screws and nuts — Square drive sockets — Part 3: Machine-operated sockets ('non-impact') — Dimensions,Outils de manoeuvre pour vis et
• ISO 2725-3:201562553,IS,,ISO 2725-3:2015,Assembly tools for screws and nuts — Square drive sockets — Part 3: Machine-operated sockets ('non-impact'),Outils de manoeuvre pour vis et écrous — Douil
• ISO 2725:19737696,IS,,ISO 2725:1973,Assembly tools for screws and nuts — Power and hand operated square drive sockets — Metric series,"Outils de manoeuvre pour vis et écrous — Douilles à carré
• ISO 2725:19877697,IS,,ISO 2725:1987,Assembly tools for screws and nuts — Machine- and hand-operated square drive sockets — Metric series,"Outils de manoeuvre pour vis et écrous — Douilles à car
• ISO 2726:19737698,IS,,ISO 2726:1973,Woodworking tools — Metal bodied planes,Outils pour le travail du bois — Rabots métalliques,1973-02-01,1,['79.120.20'],ISO/TC 29,9599,,[7699],"['en','fr']",2
• ISO 2728:19827701,IS,,ISO 2728:1982,Woodworking tools — Plane irons,Outils pour le travail du bois — Fers de rabots,1982-11-01,2,['79.120.20'],ISO/TC 29,9599,,[7699],"['en','fr']",4
• ISO 2729:19737702,IS,,ISO 2729:1973,Woodworking tools — Chisels and gouges,Outils pour le travail du bois — Ciseaux et gouges,1973-02-01,1,['79.120.20'],ISO/TC 29,9599,,[7703],"['en','fr']",7
• ISO 2731:19737705,IS,,ISO 2731:1973,Dee shackles,Manilles droites,1973-12-01,1,['53.020.30'],ISO/TC 111,9599,,[7316],"['en','fr']",3
• ISO 2732:19737706,IS,,ISO 2732:1973,Steels and cast iron — Determination of phosphorus — Spectrophotometric method,Aciers et fontes — Dosage du phosphore — Méthode spectrophotométrique,1973-12-
• ISO 2732:19847707,IS,,ISO 2732:1984,Steel and cast iron — Determination of phosphorus content — Phosphovanadomolybdate spectrophotometric method,Aciers et fontes — Dosage du phosphore — Méthode
• ISO 2733:19837708,IS,,ISO 2733:1983,Vitreous and porcelain enamels — Apparatus for testing with acid and neutral liquids and their vapours,Émaux vitrifiés — Appareil pour essai avec des liquide
• ISO 2734:19837709,IS,,ISO 2734:1983,Vitreous and porcelain enamels — Apparatus for testing with alkaline liquids,Émaux vitrifiés — Appareil pour essai avec des liquides alcalins,1983-08-01,2,['
• ISO 2734:19971499,IS,,ISO 2734:1997,Vitreous and porcelain enamels — Apparatus for testing with alkaline liquids,Émaux vitrifiés — Appareil pour essai avec des liquides alcalins,1997-06-26,3,['
• ISO 2735:19737710,IS,,ISO 2735:1973,Hermetically sealed metal food containers — Capacities and diameters of round open-top and vent hole cans for milk,Récipients métalliques étanches pour denré
• ISO 2736-1:19867711,IS,,ISO 2736-1:1986,Concrete tests — Test specimens — Part 1: Sampling of fresh concrete,Essais du béton — Éprouvettes — Partie 1: Échantillonnage du béton frais,1986-08-14,1,
• ISO 2736-2:19867712,IS,,ISO 2736-2:1986,Concrete tests — Test specimens — Part 2: Making and curing of test specimens for strength tests,Essais du béton — Éprouvettes — Partie 2: Confection et co
• ISO 2737:19737713,IS,,ISO 2737:1973,Permeable sintered metal materials — Determination of oil content,Matériaux en métal fritté perméable — Détermination de la teneur en huile,1973-10-01,1,['77
• ISO 2738:19737714,IS,,ISO 2738:1973,Permeable sintered metal materials — Determination of density and open porosity,Matériaux métalliques frittés perméables — Détermination de la masse volumiqu
• ISO 2738:19877715,IS,,ISO 2738:1987,"Permeable sintered metal materials — Determination of density, oil content, and open porosity","Matériaux métalliques frittés perméables — Détermination de
• ISO 2738:199921494,IS,,ISO 2738:1999,"Sintered metal materials, excluding hardmetals — Permeable sintered metal materials — Determination of density, oil content and open porosity","Matériaux m
• ISO 2739:19737717,IS,,ISO 2739:1973,Sintered metal bushes — Determination of radial crushing strength,Bagues en métal fritté — Détermination de la résistance à l'écrasement radial,1973-12-01,1,
• ISO 2739:200644436,IS,,ISO 2739:2006,Sintered metal bushes — Determination of radial crushing strength,Bagues en métal fritté — Détermination de la résistance à l'écrasement radial,2006-10-25,2
• ISO 2740:19737718,IS,,ISO 2740:1973,Sintered metal materials (excluding hardmetal) — Tensile test pieces,Matériaux en métal fritté (à l'exclusion des métaux durs) — Éprouvettes de traction,1973
• ISO 2740:19867719,IS,,ISO 2740:1986,Sintered metal materials (excluding hardmetal) — Tensile test pieces,Matériaux en métal fritté (à l'exclusion des métaux-durs) — Eprouvettes de traction,1986
• ISO 2740:19992052,IS,,ISO 2740:1999,"Sintered metal materials, excluding hardmetals — Tensile test pieces","Matériaux en métal fritté, à l'exclusion des métaux-durs — Éprouvettes pour essai de
• ISO 2740:200743513,IS,,ISO 2740:2007,"Sintered metal materials, excluding hardmetals — Tensile test pieces","Matériaux en métal fritté, à l'exclusion des métaux-durs — Éprouvettes pour essai de
• ISO 2740:200951243,IS,,ISO 2740:2009,"Sintered metal materials, excluding hardmetals — Tensile test pieces","Matériaux en métal fritté, à l'exclusion des métaux-durs — Éprouvettes pour essai de
• ISO 2742:19837721,IS,,ISO 2742:1983,Vitreous and porcelain enamels — Determination of resistance to boiling citric acid,Émaux vitrifiés — Détermination de la résistance à l'acide citrique bouil
• ISO 2742:19981346,IS,,ISO 2742:1998,Vitreous and porcelain enamels — Determination of resistance to boiling citric acid,Émaux vitrifiés — Détermination de la résistance à l'acide citrique bouil
• ISO 2743:19737722,IS,,ISO 2743:1973,Vitreous and porcelain enamels — Determination of resistance to boiling hydrochloric acid,Émaux vitrifiés — Détermination de la résistance à l'acide chlorhyd
• ISO 2743:19867723,IS,,ISO 2743:1986,Vitreous and porcelain enamels — Determination of resistance to condensing hydrochloric acid vapour,Émaux vitrifiés — Détermination de la résistance aux vape
• ISO 2744:19837724,IS,,ISO 2744:1983,Vitreous and porcelain enamels — Determination of resistance to boiling water and water vapour,Émaux vitrifiés — Détermination de la résistance à l'eau bouil
• ISO 2744:19981679,IS,,ISO 2744:1998,Vitreous and porcelain enamels — Determination of resistance to boiling water and water vapour,Émaux vitrifiés — Détermination de la résistance à l'eau bouil
• ISO 2745:19737725,IS,,ISO 2745:1973,Vitreous and porcelain enamels — Determination of resistance to hot sodium hydroxide,Émaux vitrifiés — Détermination de la résistance à la soude caustique ch
• ISO 2745:19981535,IS,,ISO 2745:1998,Vitreous and porcelain enamels — Determination of resistance to hot sodium hydroxide,Émaux vitrifiés — Détermination de la résistance à la soude caustique ch
• ISO 2746:19737726,IS,,ISO 2746:1973,Vitreous and porcelain enamels — Enamelled articles for service under highly corrosive conditions — High voltage test,Émaux vitrifiés — Articles émaillés pou
• ISO 2746:19981571,IS,,ISO 2746:1998,Vitreous and porcelain enamels — Enamelled articles for service under highly corrosive conditions — High voltage test,Émaux vitrifiés — Articles émaillés pou
• ISO 2747:19737727,IS,,ISO 2747:1973,Vitreous and porcelain enamels — Enamelled cooking utensils — Determination of resistance to thermal shock,Émaux vitrifiés — Ustensiles de cuisson émaillés —
• ISO 2758:19837738,IS,,ISO 2758:1983,Paper — Determination of bursting strength,Papier — Détermination de la résistance à l'éclatement,1983-11-01,2,['85.060'],ISO/TC 6/SC 2,9599,,[1421],"['en','
• ISO 2758:20011421,IS,,ISO 2758:2001,Paper — Determination of bursting strength,Papier — Détermination de la résistance à l'éclatement,2001-10-18,3,['85.060'],ISO/TC 6/SC 2,9599,[7738],[61487],"
• ISO 2759:19837739,IS,,ISO 2759:1983,Board — Determination of bursting strength,Carton — Détermination de la résistance à l'éclatement,1983-11-01,2,['85.060'],ISO/TC 6/SC 2,9599,,[1574],"['en','
• ISO 2759:20011574,IS,,ISO 2759:2001,Board — Determination of bursting strength,Carton — Détermination de la résistance à l'éclatement,2001-11-22,3,['85.060'],ISO/TC 6/SC 2,9599,[7739],[61488],"
• ISO 2764:19747743,IS,,ISO 2764:1974,Withdrawal of ISO 2764-1974,Annulation de l'ISO 2764-1974,1974-12-01,1,['49.020'],ISO/TC 20,9599,,[5708],['en'],4
• ISO 2765:19747744,IS,,ISO 2765:1974,Withdrawal of ISO 2765-1974,Annulation de l'ISO 2765-1974,1974-12-01,1,['49.020'],ISO/TC 20,9599,,[5712],['en'],8
• ISO 2767:19737746,IS,,ISO 2767:1973,Surface treatments of metals — Anodic oxidation of aluminium and its alloys — Specular reflectance at 45 degrees — Total reflectance — Image clarity,Traiteme
• ISO 2768-2:19897749,IS,,ISO 2768-2:1989,General tolerances — Part 2: Geometrical tolerances for features without individual tolerance indications,Tolérances générales — Partie 2: Tolérances géomé
• ISO 2768:19737747,IS,,ISO 2768:1973,Permissible machining variations in dimensions without tolerance indication,Écarts d'usinage pour cotes sans indication de tolérances,1973-12-01,1,['17.040.1
• ISO 2772-1:19737753,IS,,ISO 2772-1:1973,Test conditions for box type vertical drilling machines — Testing of the accuracy — Part 1: Geometrical tests,Conditions d'essais des machines à percer ver
• ISO 2772-2:19747754,IS,,ISO 2772-2:1974,Test conditions for box type vertical drilling machines — Testing of the accuracy — Part 2: Practical test,Conditions d'essais des machines à percer vertic
• ISO 2773-1:19737755,IS,,ISO 2773-1:1973,Test conditions for pillar type vertical drilling machines — Testing of the accuracy — Part 1: Geometrical tests,Conditions d'essais des machines à percer
• ISO 2773-2:19737756,IS,,ISO 2773-2:1973,Test conditions for pillar type vertical drilling machines — Testing of the accuracy — Part 2: Practical test,Conditions d'essai des machines à percer vert
• ISO 2779:19737761,IS,,ISO 2779:1973,Aluminium machining alloys — Chemical composition and mechanical properties of alloys Al-Cu6 Bi Pb and Al-Cu4 Pb Mg,Alliages d'aluminium de décolletage — Com
• ISO 2780:19737762,IS,,ISO 2780:1973,Milling cutters with tenon drive — Interchangeability dimensions with cutter arbors — Metric series,Fraises à métaux à entraînement par tenons — Dimensions d
• ISO 2780:19867763,IS,,ISO 2780:1986,Milling cutters with tenon drive — Interchangeability dimensions with cutter arbors — Metric series,Fraises à métaux à entraînement par tenons — Dimensions d
• ISO 2780:200642237,IS,,ISO 2780:2006,Milling cutters with tenon drive — Interchangeability dimensions for cutter arbors — Metric series,Fraises à métaux à entraînement par tenons — Dimensions d
• ISO 2781:19817764,IS,,ISO 2781:1981,"Rubber, vulcanized — Determination of density",Caoutchouc vulcanisé — Détermination de la masse volumique,1981-12-01,2,['83.060'],ISO/TC 45,9599,,[7765],"['
• ISO 2781:19887765,IS,,ISO 2781:1988,"Rubber, vulcanized — Determination of density",Caoutchouc vulcanisé — Détermination de la masse volumique,1988-11-24,3,['83.060'],ISO/TC 45/SC 2,9599,[7764]
• ISO 2781:1988/Cor 1:199623837,IS,Cor,ISO 2781:1988/Cor 1:1996,"Rubber, vulcanized — Determination of density — Technical Corrigendum 1",Caoutchouc vulcanisé — Détermination de la masse volumique — Rectifi
• ISO 2781:200843668,IS,,ISO 2781:2008,"Rubber, vulcanized or thermoplastic — Determination of density",Caoutchouc vulcanisé ou thermoplastique — Détermination de la masse volumique,2008-04-22,4,
• ISO 2781:2008/Amd 1:201053039,IS,Amd,ISO 2781:2008/Amd 1:2010,"Rubber, vulcanized or thermoplastic — Determination of density — Amendment 1: Precision data",Caoutchouc vulcanisé ou thermoplastique — Déter
• ISO 2782-1:201255600,IS,,ISO 2782-1:2012,"Rubber, vulcanized or thermoplastic — Determination of permeability to gases — Part 1: Differential-pressure methods",Caoutchouc vulcanisé ou thermoplast
• ISO 2782-1:201663792,IS,,ISO 2782-1:2016,"Rubber, vulcanized or thermoplastic — Determination of permeability to gases — Part 1: Differential-pressure methods",Caoutchouc vulcanisé ou thermoplast
• ISO 2782-2:201255601,IS,,ISO 2782-2:2012,"Rubber, vulcanized or thermoplastic — Determination of permeability to gases — Part 2: Equal-pressure method",Caoutchouc vulcanisé ou thermoplastique — D
• ISO 2782:19777766,IS,,ISO 2782:1977,"Rubber, vulcanized — Determination of permeability to gases — Constant pressure method",Caoutchouc vulcanisé — Détermination de la perméabilité aux gaz — Mé
• ISO 2782:19957767,IS,,ISO 2782:1995,"Rubber, vulcanized or thermoplastic — Determination of permeability to gases",Caoutchouc vulcanisé ou thermoplastique — Détermination de la perméabilité aux
• ISO 2782:200643674,IS,,ISO 2782:2006,"Rubber, vulcanized or thermoplastic — Determination of permeability to gases",Caoutchouc vulcanisé ou thermoplastique — Détermination de la perméabilité au
• ISO 2785:19747770,IS,,ISO 2785:1974,Guide to the selection of asbestos-cement pipes subject to external loads with of without internal pressure,Guide en vue du choix des tuyaux en amiante-cimen
• ISO 2788:19747775,IS,,ISO 2788:1974,Documentation — Guidelines for the establishment and development of monolingual thesauri,Documentation — Principes directeurs pour l'établissement et le déve
• ISO 2788:19867776,IS,,ISO 2788:1986,Documentation — Guidelines for the establishment and development of monolingual thesauri,Documentation — Principes directeurs pour l'établissement et le déve
• ISO 2789:19747777,IS,,ISO 2789:1974,International library statistics,Statistiques internationales de bibliothèques,1974-02-01,1,['01.140.20'],ISO/TC 46/SC 8,9599,,[7778],"['en','fr']",4
• ISO 2789:19917778,IS,,ISO 2789:1991,Information and documentation — International library statistics,Information et documentation — Statistiques internationales de bibliothèques,1991-04-25,2,['
• ISO 2789:200328236,IS,,ISO 2789:2003,Information and documentation — International library statistics,Information et documentation — Statistiques internationales de bibliothèques,2003-02-06,3,[
• ISO 2789:200639181,IS,,ISO 2789:2006,Information and documentation — International library statistics,Information et documentation — Statistiques internationales de bibliothèques,2006-09-22,4,[
• ISO 2789:201360680,IS,,ISO 2789:2013,Information and documentation — International library statistics,Information et documentation — Statistiques internationales de bibliothèques,2013-08-21,5,[
• ISO 2790:19827779,IS,,ISO 2790:1982,Narrow V-belt drives for the automotive industry — Dimensions,Transmissions par courroies trapézoïdales étroites pour la construction automobile — Dimensions
• ISO 2790:19897780,IS,,ISO 2790:1989,Belt drives — Narrow V-belts for the automotive industry and corresponding pulleys — Dimensions,Transmissions par courroies — Courroies trapézoïdales étroite
• ISO 2790:200437879,IS,,ISO 2790:2004,Belt drives — V-belts for the automotive industry and corresponding pulleys — Dimensions,Transmissions par courroies — Courroies trapézoïdales pour la const
• ISO 2791:19737781,IS,,ISO 2791:1973,Bow shackles,Manilles lyre,1973-12-01,1,['53.020.30'],ISO/TC 111,9599,,[7316],"['en','fr']",3
• ISO 2795:19797782,IS,,ISO 2795:1979,Plain bearings made from sintered material — Dimensions and tolerances,Paliers lisses — Coussinets frittés — Dimensions et tolérances,1979-10-01,2,['21.100.1
• ISO 2795:19867783,IS,,ISO 2795:1986,Plain bearings made from sintered material — Dimensions and tolerances,Paliers lisses — Coussinets frittés — Dimensions et tolérances,1986-05-15,3,['21.100.1
• ISO 2795:19917784,IS,,ISO 2795:1991,Plain bearings — Sintered bushes — Dimensions and tolerances,Paliers lisses — Coussinets frittés — Dimensions et tolérances,1991-10-24,4,['21.100.10'],ISO/TC
• ISO 2795:201463628,IS,,ISO 2795:2014,Plain bearings — Sintered bushes — Dimensions and tolerances,Paliers lisses — Coussinets frittés — Dimensions et tolérances,2014-01-17,5,['21.100.10'],ISO/T
• ISO 2796:19807785,IS,,ISO 2796:1980,Cellular plastics — Test for dimensional stability of rigid materials,Plastiques alvéolaires — Essai de stabilité dimensionnelle des matériaux rigides,1980-1
• ISO 2797:19747787,IS,,ISO 2797:1974,Textile glass — Rovings — Basis for specification,Verre textile — Stratifils — Base de spécifications,1974-11-01,1,['59.100.10'],ISO/TC 61,9599,,[7788],"['en
• ISO 2797:19867788,IS,,ISO 2797:1986,Textile glass — Rovings — Basis for a specification,Verre textile — Stratifils — Base de spécification,1986-08-28,2,['59.100.10'],ISO/TC 61/SC 13,9599,[7787]
• ISO 2798:19747789,IS,,ISO 2798:1974,Withdrawal of ISO 2798-1974,Annulation de l'ISO 2798-1974,1974-08-01,1,['83.100'],ISO/TC 61,9599,,[5548],"['en','fr']",4
• ISO 2801:19737792,IS,,ISO 2801:1973,Clothing for protection against heat and fire — General recommendations for users and for those in charge of such users,Vêtements de protection contre la cha
• ISO 2801:19987793,IS,,ISO 2801:1998,"Clothing for protection against heat and flame — General recommendations for selection, care and use of protective clothing","Vêtements de protection contre
• ISO 2802:19747794,IS,,ISO 2802:1974,Textile machinery and accessories — Plastic travellers for spinning and twisting,Matériel pour l'industrie textile — Curseurs en matière plastique pour annea
• ISO 2803:19747795,IS,,ISO 2803:1974,Photography — Silver-gelatin type microfilms — Processing and storage for archival purposes,Photographie — Microcopies gélatino- argentiques sur film — Trait
• ISO 2804:19737796,IS,,ISO 2804:1973,"Wire, bar or tube drawing dies — As sintered pellets of hard metal (carbide) — Dimensions",Filières de tréfilage et d'étirage — Noyaux bruts en carbures mét
• ISO 2806:19807797,IS,,ISO 2806:1980,Numerical control of machines — Vocabulary,Commande numérique des machines — Vocabulaire,1980-12-01,1,"['25.040.20','01.040.25']",ISO/TC 184/SC 1,9599,,[7798
• ISO 2808:19747799,IS,,ISO 2808:1974,Paints and varnishes — Determination of film thickness,Peintures et vernis — Détermination de l'épaisseur du feuil,1974-07-01,1,['87.040'],ISO/TC 35/SC 9,959
• ISO 2808:19917800,IS,,ISO 2808:1991,Paints and varnishes — Determination of film thickness,Peintures et vernis — Détermination de l'épaisseur du feuil,1991-12-12,2,['87.040'],ISO/TC 35/SC 9,959
• ISO 2808:199720722,IS,,ISO 2808:1997,Paints and varnishes — Determination of film thickness,Peintures et vernis — Détermination de l'épaisseur du feuil,1997-09-18,3,['87.040'],ISO/TC 35/SC 9,95
• ISO 2808:200737486,IS,,ISO 2808:2007,Paints and varnishes — Determination of film thickness,Peintures et vernis — Détermination de l'épaisseur du feuil,2007-01-15,4,['87.040'],ISO/TC 35/SC 9,95
• ISO 2809:19767801,IS,,ISO 2809:1976,Paints and varnishes — Determination of light fastness of paints for interior use,Peintures et vernis — Détermination de la solidité à la lumière des peintur
• ISO 2810:19747803,IS,,ISO 2810:1974,Paints and varnishes — Notes for guidance on the conduct of natural weathering tests,Peintures et vernis — Notes indicatives sur la conduite des essais de vi
• ISO 2810:200434725,IS,,ISO 2810:2004,Paints and varnishes — Natural weathering of coatings — Exposure and assessment,Peintures et vernis — Vieillissement naturel des revêtements — Exposition et
• ISO 2811-1:19972455,IS,,ISO 2811-1:1997,Paints and varnishes — Determination of density — Part 1: Pyknometer method,Peintures et vernis — Détermination de la masse volumique — Partie 1: Méthode p
• ISO 2811-1:201150493,IS,,ISO 2811-1:2011,Paints and varnishes — Determination of density — Part 1: Pyknometer method,Peintures et vernis — Détermination de la masse volumique — Partie 1: Méthode
• ISO 2811-1:201666946,IS,,ISO 2811-1:2016,Paints and varnishes — Determination of density — Part 1: Pycnometer method,Peintures et vernis — Détermination de la masse volumique — Partie 1: Méthode
• ISO 2811-2:199725477,IS,,ISO 2811-2:1997,Paints and varnishes — Determination of density — Part 2: Immersed body (plummet) method,Peintures et vernis — Détermination de la masse volumique — Parti
• ISO 2811-3:199725478,IS,,ISO 2811-3:1997,Paints and varnishes — Determination of density — Part 3: Oscillation method,Peintures et vernis — Détermination de la masse volumique — Partie 3: Méthode
• ISO 2811-3:201150495,IS,,ISO 2811-3:2011,Paints and varnishes — Determination of density — Part 3: Oscillation method,Peintures et vernis — Détermination de la masse volumique — Partie 3: Méthode
• ISO 2811-4:199725479,IS,,ISO 2811-4:1997,Paints and varnishes — Determination of density — Part 4: Pressure cup method,Peintures et vernis — Détermination de la masse volumique — Partie 4: Méthod
• ISO 2811:19747804,IS,,ISO 2811:1974,Paints and varnishes — Determination of density,Peintures et vernis — Détermination de la masse volumique,1974-04-01,1,['87.040'],ISO/TC 35/SC 9,9599,,"[2455
• ISO 2812-1:19937808,IS,,ISO 2812-1:1993,Paints and varnishes — Determination of resistance to liquids — Part 1: General methods,Peintures et vernis — Détermination de la résistance aux liquides —
• ISO 2812-1:200737482,IS,,ISO 2812-1:2007,Paints and varnishes — Determination of resistance to liquids — Part 1: Immersion in liquids other than water,Peintures et vernis — Détermination de la ré
• ISO 2812-2:19937807,IS,,ISO 2812-2:1993,Paints and varnishes — Determination of resistance to liquids — Part 2: Water immersion method,Peintures et vernis — Détermination de la résistance aux liq
• ISO 2812-2:200739405,IS,,ISO 2812-2:2007,Paints and varnishes — Determination of resistance to liquids — Part 2: Water immersion method,Peintures et vernis — Détermination de la résistance aux li
• ISO 2812-3:200737483,IS,,ISO 2812-3:2007,Paints and varnishes — Determination of resistance to liquids — Part 3: Method using an absorbent medium,Peintures et vernis — Détermination de la résista
• ISO 2812-3:201256811,IS,,ISO 2812-3:2012,Paints and varnishes — Determination of resistance to liquids — Part 3: Method using an absorbent medium,Peintures et vernis — Détermination de la résista
• ISO 2812-4:200737484,IS,,ISO 2812-4:2007,Paints and varnishes — Determination of resistance to liquids — Part 4: Spotting methods,Peintures et vernis — Détermination de la résistance aux liquides
• ISO 2812-5:200737485,IS,,ISO 2812-5:2007,Paints and varnishes — Determination of resistance to liquids — Part 5: Temperature-gradient oven method,Peintures et vernis — Détermination de la résista
• ISO 2812:19747806,IS,,ISO 2812:1974,Paints and varnishes — Determination of resistance to liquids,Peintures et vernis — Détermination de la résistance aux liquides,1974-02-01,1,['87.040'],ISO/T
• ISO 2813:19787809,IS,,ISO 2813:1978,"Paints and varnishes — Measurement of specular gloss of non-metallic paint films at 20 degrees, 60 degrees and 85 degrees","Peintures et vernis — Mesurage d
• ISO 2813:19947810,IS,,ISO 2813:1994,"Paints and varnishes — Determination of specular gloss of non-metallic paint films at 20 degrees, 60 degrees and 85 degrees","Peintures et vernis — Détermin
• ISO 2813:1994/Cor 1:199727997,IS,Cor,ISO 2813:1994/Cor 1:1997,"Paints and varnishes — Determination of specular gloss of non-metallic paint films at 20 degrees, 60 degrees and 85 degrees — Technical Corri
• ISO 2815:19737812,IS,,ISO 2815:1973,Paints and varnishes — Buchholz indentation test,Peintures et vernis — Essais d'indentation Buchholz,1973-12-01,1,['87.040'],ISO/TC 35/SC 9,9599,,[30979],"['
• ISO 2816:19737813,IS,,ISO 2816:1973,Fundamental characteristics of a system of shoe sizing to be known as Mondopoint,"Caractéristiques fondamentales d'un système de mesure des chaussures, dit s
• ISO 2817:19747814,IS,,ISO 2817:1974,Tobacco and tobacco products — Determination of silica content,Tabac et produits du tabac — Détermination de la teneur en silice,1974-03-01,1,['65.160'],ISO/
• ISO 2818:19807815,IS,,ISO 2818:1980,Plastics — Preparation of test specimens by machining,Plastiques — Préparation des éprouvettes par usinage,1980-10-01,2,['83.080'],ISO/TC 61,9599,,[7816],"['
• ISO 2818:19947816,IS,,ISO 2818:1994,Plastics — Preparation of test specimens by machining,Plastiques — Préparation des éprouvettes par usinage,1994-08-18,3,['83.080.01'],ISO/TC 61/SC 9,9599,[78
• ISO 2818:1994/Cor 1:200750618,IS,Cor,ISO 2818:1994/Cor 1:2007,Plastics — Preparation of test specimens by machining — Technical Corrigendum 1,Plastiques — Préparation des éprouvettes par usinage — Rectifi
• ISO 2819:19807817,IS,,ISO 2819:1980,Metallic coatings on metallic substrates — Electrodeposited and chemically deposited coatings — Review of methods available for testing adhesion,Revêtements
• ISO 2825:19817821,IS,,ISO 2825:1981,Spices and condiments — Preparation of a ground sample for analysis,Épices — Préparation d'un échantillon moulu en vue de l'analyse,1981-07-01,2,['67.220.10'
• ISO 2827:19737823,IS,,ISO 2827:1973,Photography — Determination of the light output of electronic flash equipment,Photographie — Détermination de l'émission lumineuse des équipements électroniq
• ISO 2834-1:200641292,IS,,ISO 2834-1:2006,Graphic technology — Laboratory preparation of test prints — Part 1: Paste inks,Technologie graphique — Préparation en laboratoire des impressions d'essai
• ISO 2834-2:200741295,IS,,ISO 2834-2:2007,Graphic technology — Laboratory preparation test prints — Part 2: Liquid printing inks,Technologie graphique — Préparation en laboratoire des impressions
• ISO 2834-2:201565431,IS,,ISO 2834-2:2015,Graphic technology — Laboratory preparation test prints — Part 2: Liquid printing inks,Technologie graphique — Préparation en laboratoire des impressions
• ISO 2834:19817831,IS,,ISO 2834:1981,Printing inks — Preparation of standardized prints for determination of resistance to physical and chemical agents,Encres d'imprimerie — Réalisation d'impres
• ISO 2834:199920256,IS,,ISO 2834:1999,Graphic technology — Test print preparation for offset and letterpress inks,Technologie graphique — Réalisation d'impressions pour encres pour offset et typ
• ISO 2834:1999/Cor 1:200338881,IS,Cor,ISO 2834:1999/Cor 1:2003,Graphic technology — Test print preparation for offset and letterpress inks — Technical Corrigendum 1,Technologie graphique — Réalisation d'im
• ISO 2836:19747833,IS,,ISO 2836:1974,Prints and printing inks — Assessment of resistance to water,Impressions et encres d'imprimerie — Évaluation de la résistance à l'eau,1974-08-01,1,['87.080']
• ISO 2836:199928313,IS,,ISO 2836:1999,Graphic technology — Prints and printing inks — Assessment of resistance to various agents,Technologie graphique — Impressions et encres d'imprimerie — Éval
• ISO 2836:200437551,IS,,ISO 2836:2004,Graphic technology — Prints and printing inks — Assessment of resistance of prints to various agents,Technologie graphique — Impressions et encres d'imprime
• ISO 2837:19747834,IS,,ISO 2837:1974,Prints and printing inks — Assessment of resistance to solvents,Impressions et encres d'imprimerie — Évaluation de la résistance aux solvants,1974-07-01,1,['
• ISO 2837:199623388,IS,,ISO 2837:1996,Graphic technology — Prints and printing inks — Assessment of resistance to solvents,Technologie graphique — Impressions et encres d'imprimerie — Évaluation
• ISO 2838:19747835,IS,,ISO 2838:1974,Prints and printing inks — Assessment of resistance to alkalis,Impressions et encres d'imprimerie — Évaluation de la résistance aux alcalis,1974-08-01,1,['87
• ISO 2839:19747836,IS,,ISO 2839:1974,Prints and printing inks — Assessment of resistance to soaps,Impressions et encres d'imprimerie — Évaluation de la résistance aux savons,1974-08-01,1,['87.08
• ISO 2840:19747837,IS,,ISO 2840:1974,Prints and printing inks — Determination of the resistance of prints to detergents,Impressions et encres d'imprimerie — Détermination de la résistance des im
• ISO 2841:19747838,IS,,ISO 2841:1974,Prints and printing inks — Determination of the resistance of prints to cheese,Impressions et encres d'imprimerie — Détermination de la résistance des impres
• ISO 2842:19747839,IS,,ISO 2842:1974,Prints and printing inks — Determination of the resistance of prints to edible oils and fats,Impressions et encres d'imprimerie — Détermination de la résista
• ISO 2843:19747840,IS,,ISO 2843:1974,Prints and printing inks — Determination of the resistance of prints to impregnation by wax or paraffin wax,Impressions et encres d'imprimerie — Déterminatio
• ISO 2844:19747841,IS,,ISO 2844:1974,Prints and printing inks — Determination of the resistance of prints to spices,Impressions et encres d'imprimerie — Détermination de la résistance des impres
• ISO 2845:19757842,IS,,ISO 2845:1975,Set of printing inks for letterpress printing — Colorimetric characteristics,Gamme d'encres primaires pour la typographie — Caractéristiques colorimétriques,
• ISO 2846-1:19977844,IS,,ISO 2846-1:1997,Graphic technology — Colour and transparency of ink sets for four-colour-printing — Part 1: Sheet-fed and heat-set web offset lithographic printing,Technol
• ISO 2846-1:200639377,IS,,ISO 2846-1:2006,Graphic technology — Colour and transparency of printing ink sets for four-colour printing — Part 1: Sheet-fed and heat-set web offset lithographic printi
• ISO 2846-2:200025070,IS,,ISO 2846-2:2000,Graphic technology — Colour and transparency of printing ink sets for four-colour-printing — Part 2: Coldset offset lithographic printing,Technologie grap
• ISO 2846:19757843,IS,,ISO 2846:1975,Set of printing inks for offset printing — Colorimetric characteristics,Gamme d'encres primaires pour l'impression offset — Caractéristiques colorimétriques,
• ISO 2848:19747845,IS,,ISO 2848:1974,Modular co-ordination — Principles and rules,Coordination modulaires — Principes et règles,1974-03-01,1,['91.010.30'],ISO/TC 59,9599,,[7846],"['en','fr']",4
• ISO 2851:19737848,IS,,ISO 2851:1973,Metal pipes and fittings — Stainless steel bends and tees for the food industry,Tuyauteries et raccords métalliques — Coudes et tés en acier inoxydable pour
• ISO 2852:19747850,IS,,ISO 2852:1974,Metal pipes and fittings — Stainless steel clamp liners with gaskets for the food industry,Tuyauteries et raccords métalliques — Abouts à flancs coniques en
• ISO 2853:19767852,IS,,ISO 2853:1976,Metal pipes and fittings — Stainless steel screwed couplings for the food industry,Tuyauteries et raccords métalliques — Raccords filetés en acier inoxydable
• ISO 2856:19817856,IS,,ISO 2856:1981,Elastomers — General requirements for dynamic testing,Élastomères — Spécifications générales pour essais dynamiques,1981-10-01,2,['83.060'],ISO/TC 45/SC 2,95
• ISO 2859-0:19957865,IS,,ISO 2859-0:1995,Sampling procedures for inspection by attributes — Part 0: Introduction to the ISO 2859 attribute sampling system,Règles d'échantillonnage pour les contrôl
• ISO 2859-1:19897866,IS,,ISO 2859-1:1989,Sampling procedures for inspection by attributes — Part 1: Sampling plans indexed by acceptable quality level (AQL) for lot-by-lot inspection,"Règles d'éch
• ISO 2859-1:1989/Cor 1:199322443,IS,Cor,ISO 2859-1:1989/Cor 1:1993,Sampling procedures for inspection by attributes — Part 1: Sampling plans indexed by acceptable quality level (AQL) for lot-by-lot inspectio
• ISO 2859-1:19991141,IS,,ISO 2859-1:1999,Sampling procedures for inspection by attributes — Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection,"Règles d'é
• ISO 2859-1:1999/Amd 1:201153053,IS,Amd,ISO 2859-1:1999/Amd 1:2011,Sampling procedures for inspection by attributes — Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspect
• ISO 2859-1:1999/Cor 1:200135236,IS,Cor,ISO 2859-1:1999/Cor 1:2001,Sampling procedures for inspection by attributes — Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspect
• ISO 2859-2:19857867,IS,,ISO 2859-2:1985,Sampling procedures for inspection by attributes — Part 2: Sampling plans indexed by limiting quality (LQ) for isolated lot inspection,"Règles d'échantillo
• ISO 2859-3:19917868,IS,,ISO 2859-3:1991,Sampling procedures for inspection by attributes — Part 3: Skip-lot sampling procedures,Règles d'échantillonnage pour les contrôles par attributs — Partie
• ISO 2859-4:199922017,IS,,ISO 2859-4:1999,Sampling procedures for inspection by attributes — Part 4: Procedures for assessment of stated quality levels,Règles d'échantillonnage pour les contrôles
• ISO 2859-4:200236164,IS,,ISO 2859-4:2002,Sampling procedures for inspection by attributes — Part 4: Procedures for assessment of declared quality levels,Règles d'échantillonnage pour les contrôle
• ISO 2859-10:200639991,IS,,ISO 2859-10:2006,Sampling procedures for inspection by attributes — Part 10: Introduction to the ISO 2859 series of standards for sampling for inspection by attributes,Rè
• ISO 2859:19747863,IS,,ISO 2859:1974,Sampling procedures and tables for inspection by attributes,Règles et tables d'échantillonnage pour les contrôles par attributs,1974-11-01,1,['03.120.30'],IS
• ISO 2860:19837869,IS,,ISO 2860:1983,Earth-moving machinery — Minimum access dimensions,Engins de terrassement — Dimensions minimales des passages,1983-06-01,3,['53.100'],ISO/TC 127/SC 2,9599,,[
• ISO 2861-1:19747871,IS,,ISO 2861-1:1974,Vacuum technology — Quick-release couplings — Dimensions — Part 1: Clamped type,Technique du vide — Raccords rapides — Dimensions — Partie 1: Raccords à co
• ISO 2861:201358069,IS,,ISO 2861:2013,Vacuum technology — Dimensions of clamped-type quick-release couplings,Technique du vide — Dimensions des raccords rapides à colliers,2013-04-17,1,['23.160'
• ISO 2867:19807879,IS,,ISO 2867:1980,Earth-moving machinery — Access systems,Engins de terrassement — Moyens d'accès,1980-11-01,3,['53.100'],ISO/TC 127/SC 2,9599,,[7880],"['en','fr']",5
• ISO 2867:19897880,IS,,ISO 2867:1989,Earth-moving machinery — Access systems,Engins de terrassement — Moyens d'accès,1989-12-21,4,['53.100'],ISO/TC 127/SC 2,9599,[7879],[1926],"['en','fr']",7
• ISO 2867:19941926,IS,,ISO 2867:1994,Earth-moving machinery — Access systems,Engins de terrassement — Moyens d'accès,1994-07-28,5,['53.100'],ISO/TC 127/SC 2,9599,[7880],[32899],"['en','fr']",11
• ISO 2867:200632899,IS,,ISO 2867:2006,Earth-moving machinery — Access systems,Engins de terrassement — Moyens d'accès,2006-06-28,6,['53.100'],ISO/TC 127/SC 2,9599,[1926],[51279],"['en','fr']",16
• ISO 2867:2006/Cor 1:200851688,IS,Cor,ISO 2867:2006/Cor 1:2008,Earth-moving machinery — Access systems — Technical Corrigendum 1,Engins de terrassement — Moyens d'accès — Rectificatif technique 1,2008-06-1
• ISO 2870:19737883,IS,,ISO 2870:1973,Surface active agents — Detergents — Anionic-active matter hydrolyzable under acid conditions — Determination of hydrolyzable and non-hydrolyzable anionic-ac
• ISO 2870:19867884,IS,,ISO 2870:1986,Surface active agents — Detergents — Determination of anionic-active matter hydrolyzable and non-hydrolyzable under acid conditions,Agents de surface — Déter
• ISO 2871-1:19887887,IS,,ISO 2871-1:1988,Surface active agents — Detergents — Determination of cationic-active matter content — Part 1: High-molecular-mass cationic-active matter,Agents de surface
• ISO 2871-2:19907888,IS,,ISO 2871-2:1990,Surface active agents — Detergents — Determination of cationic-active matter content — Part 2: Cationic-active matter of low molecular mass (between 200 an
• ISO 2871:19737885,IS,,ISO 2871:1973,Surface active agents — Detergents — Determination of cationic-active matter — Direct two-phase titration procedure,Agents de surface — Détergents — Détermin
• ISO 2872-1:19737889,IS,,ISO 2872-1:1973,"Packaging — Complete, filled transport packages — Part 1: Compression test",Emballages — Emballages d'expédition complets et pleins — Partie 1: Essai de c
• ISO 2872:19857890,IS,,ISO 2872:1985,"Packaging — Complete, filled transport packages — Compression test",Emballages — Emballages d'expédition complets et pleins — Essai de compression,1985-12-0
• ISO 2873-1:19737891,IS,,ISO 2873-1:1973,"Packaging — Complete, filled transport packages — Part 1: Low pressure test",Emballages — Emballages d'expédition complets et pleins — Partie 1: Essai de
• ISO 2873:19857892,IS,,ISO 2873:1985,"Packaging — Complete, filled transport packages — Low pressure test",Emballages — Emballages d'expédition complets et pleins — Essai de basse pression,1985-
• ISO 2874-1:19737893,IS,,ISO 2874-1:1973,"Packaging — Complete, filled transport packages — Part 1: Stacking test using compression tester",Emballages — Emballages d'expédition complets et pleins
• ISO 2874:19857894,IS,,ISO 2874:1985,"Packaging — Complete, filled transport packages — Stacking test using compression tester",Emballages — Emballages d'expédition complets et pleins — Essai de
• ISO 2875-1:19737895,IS,,ISO 2875-1:1973,"Packaging — Complete, filled transport packages — Part 1: Water spray test",Emballages — Emballages d'expédition complets et pleins — Partie 1: Essai de r
• ISO 2875:19857896,IS,,ISO 2875:1985,"Packaging — Complete, filled transport packages — Water spray test",Emballages — Emballages d'expédition complets et pleins — Essai de résistance aux projec
• ISO 2876-1:19737897,IS,,ISO 2876-1:1973,"Packaging — Complete, filled transport packages — Part 1: Rolling test",Emballages — Emballages d'expédition complets et pleins — Partie 1: Essai de roule
• ISO 2878:19787901,IS,,ISO 2878:1978,"Rubber, vulcanized — Antistatic and conductive products — Determination of electrical resistance",Caoutchouc vulcanisé — Produits antiélectrostatiques et co
• ISO 2878:19877902,IS,,ISO 2878:1987,"Rubber, vulcanized — Antistatic and conductive products — Determination of electrical resistance",Caoutchouc vulcanisé — Produits antiélectrostatiques et co
• ISO 2878:200539930,IS,,ISO 2878:2005,Rubber — Antistatic and conductive products — Determination of electrical resistance,Caoutchouc vulcanisé — Produits antistatiques et conducteurs — Détermin
• ISO 2878:201153021,IS,,ISO 2878:2011,"Rubber, vulcanized or thermoplastic — Antistatic and conductive products — Determination of electrical resistance",Caoutchouc vulcanisé ou thermoplastique
• ISO 2881:19777904,IS,,ISO 2881:1977,Tobacco and tobacco products — Determination of alkaloids in tobacco — Spectrophotometric method,Tabac et produits du tabac — Détermination de la teneur en a
• ISO 2884-1:199926991,IS,,ISO 2884-1:1999,Paints and varnishes — Determination of viscosity using rotary viscometers — Part 1: Cone-and-plate viscometer operated at a high rate of shear,Peintures
• ISO 2884-2:200331513,IS,,ISO 2884-2:2003,Paints and varnishes — Determination of viscosity using rotary viscometers — Part 2: Disc or ball viscometer operated at a specified speed,Peintures et ve
• ISO 2884:19747908,IS,,ISO 2884:1974,Paints and varnishes — Determination of viscosity at a high rate of shear,Peintures et vernis — Détermination de la viscosité des peintures à gradient de vit
• ISO 2889:19757913,IS,,ISO 2889:1975,General principles for sampling airborne radioactive materials,Principes généraux pour le prélèvement des matières radioactives contenues dans l'air,1975-05-
• ISO 2889:201040347,IS,,ISO 2889:2010,Sampling airborne radioactive materials from the stacks and ducts of nuclear facilities,Échantillonnage des substances radioactives contenues dans l'air dan
• ISO 2889:202176005,IS,,ISO 2889:2021,Sampling airborne radioactive materials from the stacks and ducts of nuclear facilities,Échantillonnage de substances radioactives en suspension dans l'air
• ISO 2892:19737916,IS,,ISO 2892:1973,Austenitic cast iron,Fonte austénitique,1973-09-01,1,['77.080.10'],ISO/TC 25,9599,,[34783],"['en','fr']",9
• ISO 2894:19807917,IS,,ISO 2894:1980,"Embossed credit cards — Specifications, numbering system and registration procedure","Cartes de crédit estampées — Spécifications, système de numérotation e
• ISO 2895:19747918,IS,,ISO 2895:1974,Cinematography — Screen luminance for review room projection of motion-picture film intended for indoor theatres,Cinématographie — Luminance des écrans de pr
• ISO 2896:19747919,IS,,ISO 2896:1974,Rigid cellular plastics — Determination of water absorption,Matières plastiques alvéolaires rigides — Détermination de l'absorption d'eau,1974-12-01,1,['83.1
• ISO 2896:19877920,IS,,ISO 2896:1987,"Cellular plastics, rigid — Determination of water absorption",Plastiques alvéolaires rigides — Détermination de l'absorption d'eau,1987-11-26,2,['83.100'],I
• ISO 2897-1:19907922,IS,,ISO 2897-1:1990,Plastics — Impact-resistant polystyrene (SB) moulding and extrusion materials — Part 1: Designation,Plastiques — Polystyrène (SB) résistant au choc pour mo
• ISO 2897-1:199726807,IS,,ISO 2897-1:1997,Plastics — Impact-resistant polystyrene (PS-I) moulding and extrusion materials — Part 1: Designation system and basis for specifications,Plastiques — Pol
• ISO 2897-2:19817923,IS,,ISO 2897-2:1981,Plastics — Impact-resistant polystyrenes — Part 2: Determination of properties,Plastiques — Polystyrènes résistant au choc — Partie 2: Détermination des ca
• ISO 2897-2:19947924,IS,,ISO 2897-2:1994,Plastics — Impact-resistant polystyrene (PS-I) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties,Pla
• ISO 2897-2:1994/Cor 1:199525715,IS,Cor,ISO 2897-2:1994/Cor 1:1995,Plastics — Impact-resistant polystyrene (PS-I) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of
• ISO 2897-2:200333334,IS,,ISO 2897-2:2003,Plastics — Impact-resistant polystyrene (PS-I) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties,Pl
• ISO 2897:19767921,IS,,ISO 2897:1976,Plastics — Designation of impact-resistant polystyrenes,Matières plastiques — Désignation des polystyrènes résistants au choc,1976-01-01,1,['83.080.20'],ISO/
• ISO 2898-1:19807925,IS,,ISO 2898-1:1980,Plastics — Plasticized compounds of homopolymers and copolymers of vinyl chloride — Part 1: Designation,Plastiques — Compositions plastifiées d'homopolymèr
• ISO 2898-1:19867926,IS,,ISO 2898-1:1986,Plastics — Plasticized compounds of homopolymers and copolymers of vinyl chloride (PVC-P) — Part 1: Designation,Plastiques — Compositions plastifiées d'hom
• ISO 2898-1:199620474,IS,,ISO 2898-1:1996,Plastics — Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials — Part 1: Designation system and basis for specifications,Plastiques
• ISO 2898-2:19807927,IS,,ISO 2898-2:1980,Plastics — Plasticized compounds of homopolymers and copolymers of vinyl chloride — Part 2: Determination of properties,Plastiques — Compositions plastifié
• ISO 2898-2:19897928,IS,,ISO 2898-2:1989,Plastics — Plasticized compounds of homopolymers and copolymers of vinyl chloride (PVC-P) — Part 2: Preparation of test specimens and determination of prop
• ISO 2898-2:199725201,IS,,ISO 2898-2:1997,Plastics — Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properti
• ISO 2898-2:200850605,IS,,ISO 2898-2:2008,Plastics — Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properti
• ISO 2901:19777932,IS,,ISO 2901:1977,ISO metric trapezoidal screw threads — Basic profile and maximum material profiles,Filetages métriques trapézoïdaux ISO — Profil de base et profils à maximum
• ISO 2901:19937933,IS,,ISO 2901:1993,ISO metric trapezoidal screw threads — Basic profile and maximum material profiles,Filetages métriques trapézoïdaux ISO — Profil de base et profils à maximum
• ISO 2902:19777935,IS,,ISO 2902:1977,ISO metric trapezoidal screw threads — General plan,Filetages métriques trapézoïdaux ISO — Vue d'ensemble,1977-10-01,1,['21.040.10'],ISO/TC 1,9599,,"[70093,7
• ISO 2903:19777937,IS,,ISO 2903:1977,ISO metric trapezoidal screw threads — Tolerances,Filetages métriques trapézoïdaux ISO — Tolérances,1977-10-01,1,['21.040.10'],ISO/TC 1,9599,,"[7936,7938]","
• ISO 2903:19937938,IS,,ISO 2903:1993,ISO metric trapezoidal screw threads — Tolerances,Filetages métriques trapézoïdaux ISO — Tolérances,1993-10-28,2,['21.040.10'],ISO/TC 1,9599,[7937],[68336],"
• ISO 2904:19777940,IS,,ISO 2904:1977,ISO metric trapezoidal screw threads — Basic dimensions,Filetages métriques trapézoïdaux ISO — Dimensions de base,1977-10-01,1,['21.040.10'],ISO/TC 1,9599,,"
• ISO 2905:19747941,IS,,ISO 2905:1974,Modular units for machine tool construction — Spindle noses and adjustable adaptors for multi-spindle heads,Éléments standard pour la construction des machin
• ISO 2906:19727943,IS,,ISO 2906:1972,Cinematography — 35 mm motion-picture film — Image area produced by camera aperture,Cinématographie — Film cinématographique de 35 mm — Champ d'image enregis
• ISO 2906:19847944,IS,,ISO 2906:1984,Cinematography — Image area produced by camera aperture on 35 mm motion-picture film — Position and dimensions,Cinématographie — Surface d'image délimitée pa
• ISO 2907:19727945,IS,,ISO 2907:1972,Cinematography — 35 mm motion-picture film — Projectable image area,Cinématographie — Film cinématographique de 35 mm — Champ d'image projetable,1972-12-01,1
• ISO 2907:19847946,IS,,ISO 2907:1984,Cinematography — Maximum projectable image area on 35 mm motion-picture film — Position and dimensions,Cinématographie — Surface maximale projetable pour une
• ISO 2908:19747947,IS,,ISO 2908:1974,Petroleum waxes — Determination of oil content,Cires de pétrole — Détermination de la teneur en huile,1974-08-01,1,['75.140'],ISO/TC 28,9599,,[29952],"['en',
• ISO 2909:19817948,IS,,ISO 2909:1981,Petroleum products — Calculation of viscosity index from kinematic viscosity,Produits pétroliers — Calcul de l'indice de viscosité à partir de la viscosité c
• ISO 2910:19747949,IS,,ISO 2910:1974,Cinematography — Screen luminance for the projection of motion-picture films in indoor theatres,Cinématographie — Luminance des écrans de projection dans les
• ISO 2910:19907950,IS,,ISO 2910:1990,Cinematography — Screen luminance for the projection of motion-picture prints in indoor theatres and review rooms,Cinématographie — Luminance des écrans de p
• ISO 2910:200739968,IS,,ISO 2910:2007,Cinematography — Screen luminance and chrominance for the projection of motion pictures,Cinématographie — Luminance et chrominance des écrans pour la projec
• ISO 2911:19767951,IS,,ISO 2911:1976,Sweetened condensed milk — Determination of sucrose content — Polarimetric method,Laits concentrés sucrés — Détermination de la teneur en saccharose — Méthod
• ISO 2917:19747959,IS,,ISO 2917:1974,Meat and meat products — Measurement of pH (Reference method),Viandes et produits à base de viande — Mesurage du pH (Méthode de référence),1974-04-01,1,['67.
• ISO 2919:19807963,IS,,ISO 2919:1980,Sealed radioactive sources — Classification,Sources radioactives scellées — Classification,1980-05-01,1,['13.280'],ISO/TC 85,9599,,[2638],"['en','fr']",10
• ISO 2919:19992638,IS,,ISO 2919:1999,Radiation protection — Sealed radioactive sources — General requirements and classification,Radioprotection — Sources radioactives scellées — Prescriptions g
• ISO 2920:19747964,IS,,ISO 2920:1974,Whey cheese — Determination of dry matter content (Reference method),Fromage de sérum — Détermination de la teneur en matière sèche (Méthode de référence),19
• ISO 2921:19827966,IS,,ISO 2921:1982,"Rubber, vulcanized — Determination of low temperature characteristics — Temperature-retraction procedure (TR test)",Caoutchouc vulcanisé — Détermination des
• ISO 2921:199723838,IS,,ISO 2921:1997,"Rubber, vulcanized — Determination of low-temperature characteristics — Temperature-retraction procedure (TR test)",Caoutchouc vulcanisé — Détermination de
• ISO 2921:200539931,IS,,ISO 2921:2005,"Rubber, vulcanized — Determination of low-temperature characteristics — Temperature-retraction procedure (TR test)",Caoutchouc vulcanisé — Détermination de
• ISO 2921:201153020,IS,,ISO 2921:2011,"Rubber, vulcanized — Determination of low-temperature retraction (TR test)",Caoutchouc vulcanisé — Détermination du retrait à basse température (essai TR),
• ISO 2922:19757967,IS,,ISO 2922:1975,Acoustics — Measurement of noise emitted by vessels on inland water-ways and harbours,Acoustique — Mesurage du bruit émis par les bateaux de navigation intér
• ISO 2922:200027307,IS,,ISO 2922:2000,Acoustics — Measurement of airborne sound emitted by vessels on inland waterways and harbours,Acoustique — Mesurage du bruit aérien émis par les bateaux de
• ISO 2922:2000/Amd 1:201359762,IS,Amd,ISO 2922:2000/Amd 1:2013,Acoustics — Measurement of airborne sound emitted by vessels on inland waterways and harbours — Amendment 1,Acoustique — Mesurage du bruit aér
• ISO 2923:19757968,IS,,ISO 2923:1975,Acoustics — Measurement of noise on board vessels,Acoustique — Mesurage du bruit à bord des bateaux,1975-09-01,1,"['17.140.30','47.020.01']",ISO/TC 43,9599,,
• ISO 2926:19747971,IS,,ISO 2926:1974,Aluminium oxide primarily used for the production of aluminium — Particle size analysis — Sieving method,Oxyde d'aluminium principalement utilisé pour la pro
• ISO 2926:200541161,IS,,ISO 2926:2005,Aluminium oxide used for the production of primary aluminium — Particle size analysis for the range 45 µm to 150 µm — Method using electroformed sieves,Oxyd
• ISO 2928:19757973,IS,,ISO 2928:1975,Rubber hose for liquefied petroleum gases (LPG),Tuyaux en caoutchouc pour gaz de pétrole liquéfiés,1975-04-01,1,"['83.140.40','75.200']",ISO/TC 45,9599,,[797
• ISO 2928:19867974,IS,,ISO 2928:1986,Rubber hoses and hose assemblies for liquefied petroleum gases (LPG) — Bulk transfer applications — Specification,Tuyaux et flexibles en caoutchouc pour gaz
• ISO 2928:200335653,IS,,ISO 2928:2003,"Rubber hoses and hose assemblies for liquefied petroleum gas (LPG) in the liquid or gaseous phase and natural gas up to 25 bar (2,5 MPa) — Specification","
• ISO 2929:19757975,IS,,ISO 2929:1975,Rubber hose for fuel truck delivery,Tuyaux en caoutchouc pour camions-citernes,1975-05-01,1,"['83.140.40','75.200']",ISO/TC 45/SC 1,9599,,[7976],"['en','fr']
• ISO 2929:19917976,IS,,ISO 2929:1991,Rubber hoses for bulk fuel truck delivery — Specification,Tuyaux en caoutchouc pour livraison en vrac d'hydrocarbures liquides par camions-citernes — Spécifi
• ISO 2929:200233671,IS,,ISO 2929:2002,Rubber hoses and hose assemblies for bulk fuel delivery by truck — Specification,Tuyaux en caoutchouc et assemblages de tuyaux pour livraison en vrac d'hydr
• ISO 2929:201463805,IS,,ISO 2929:2014,Rubber hoses and hose assemblies for bulk fuel delivery by truck — Specification,Tuyaux en caoutchouc et assemblages de tuyaux pour livraison en vrac d'hydr
• ISO 2930:19817977,IS,,ISO 2930:1981,"Rubber, raw natural — Determination of plasticity retention index (PRI)",Caoutchouc naturel brut — Détermination de l'indice de rétention de plasticité (PRI
• ISO 2930:199520183,IS,,ISO 2930:1995,"Rubber, raw natural — Determination of plasticity retention index (PRI)",Caoutchouc naturel brut — Détermination de l'indice de rétention de plasticité (PR
• ISO 2930:1995/Amd 1:200843712,IS,Amd,ISO 2930:1995/Amd 1:2008,"Rubber, raw natural — Determination of plasticity retention index (PRI) — Amendment 1",Caoutchouc naturel brut — Détermination de l'indice de
• ISO 2930:200953002,IS,,ISO 2930:2009,"Rubber, raw natural — Determination of plasticity retention index (PRI)",Caoutchouc naturel brut — Détermination de l'indice de rétention de plasticité (PR
• ISO 2930:201768068,IS,,ISO 2930:2017,"Rubber, raw natural — Determination of plasticity retention index (PRI)",Caoutchouc naturel brut — Détermination de l'indice de rétention de plasticité (PR
• ISO 2931:19837978,IS,,ISO 2931:1983,Anodizing of aluminium and its alloys — Assessment of quality of sealed anodic oxide coatings by measurement of admittance or impedance,Anodisation de l'alum
• ISO 2931:201051488,IS,,ISO 2931:2010,Anodizing of aluminium and its alloys — Assessment of quality of sealed anodic oxidation coatings by measurement of admittance,Anodisation de l'aluminium et
• ISO 2933:19747980,IS,,ISO 2933:1974,Bonded abrasive products — Grinding wheel dimensions (Part 3),Produits abrasifs agglomérés — Dimensions des meules (Troisième partie),1974-02-01,1,['25.100.7
• ISO 2936:19837983,IS,,ISO 2936:1983,Assembly tools for screws and nuts — Hexagon socket screw keys — Metric series,Outils de manoeuvre pour vis et écrous — Clés mâles coudées pour vis à six pan
• ISO 2936:199521908,IS,,ISO 2936:1995,Assembly tools for screws and nuts — Hexagon socket screw keys,Outils de manoeuvre pour vis et écrous — Clés mâles coudées pour vis à six pans creux,1995-06
• ISO 2936:200129090,IS,,ISO 2936:2001,Assembly tools for screws and nuts — Hexagon socket screw keys,Outils de manoeuvre pour vis et écrous — Clés mâles coudées pour vis à six pans creux,2001-03
• ISO 2936:2001/Cor 1:200750574,IS,Cor,ISO 2936:2001/Cor 1:2007,Assembly tools for screws and nuts — Hexagon socket screw keys — Technical Corrigendum 1,Outils de manoeuvre pour vis et écrous — Clés mâles c
• ISO 2939:19757986,IS,,ISO 2939:1975,Cinematography — Picture image area and photographic sound record on 35 mm motion-picture release prints — Positions and dimensions,Cinématographie — Champ d
• ISO 2939:19867987,IS,,ISO 2939:1986,Cinematography — Picture image area and photographic sound record on 35 mm motion-picture release prints — Position and dimensions,Cinématographie — Champ d'
• ISO 2939:200235511,IS,,ISO 2939:2002,Cinematography — Picture image area on 35 mm motion-picture release prints — Position and dimensions,Cinématographie — Champ d'image sur les copies d'exploi
• ISO 2941:19747990,IS,,ISO 2941:1974,Hydraulic fluid power — Filter elements — Verification of collapse/burst resistance,Transmissions hydrauliques — Éléments filtrants — Vérification de la rési
• ISO 2942:19747991,IS,,ISO 2942:1974,Hydraulic fluid power — Filter elements — Determination of fabrication integrity,Transmissions hydrauliques — Éléments filtrants — Détermination de la confor
• ISO 2942:19857992,IS,,ISO 2942:1985,Hydraulic fluid power — Filter elements — Verification of fabrication integrity,Transmissions hydrauliques — Éléments filtrants — Vérification de la conformi
• ISO 2942:199421325,IS,,ISO 2942:1994,Hydraulic fluid power — Filter elements — Verification of fabrication integrity and determination of the first bubble point,Transmissions hydrauliques — Élé
• ISO 2942:200434692,IS,,ISO 2942:2004,Hydraulic fluid power — Filter elements — Verification of fabrication integrity and determination of the first bubble point,Transmissions hydrauliques — Élé
• ISO 2943:19747993,IS,,ISO 2943:1974,Hydraulic fluid power — Filter elements — Verification of material compatibility with fluids,Transmissions hydrauliques — Éléments filtrants — Vérification d
• ISO 2944:19747994,IS,,ISO 2944:1974,Fluid power systems and components — Nominal pressures,Transmissions hydrauliques et pneumatiques — Gamme de pressions nominales,1974-07-01,1,['23.100.01'],I
• ISO 2950:19747997,IS,,ISO 2950:1974,Brown coals and lignites — Classification by types on the basis of total moisture content and tar yield,"Charbons bruns et lignites — Classification en types
• ISO 2951:19747998,IS,,ISO 2951:1974,Vulcanized rubber — Determination of insulation resistance,Élastomères vulcanisés — Détermination de la résistance d'isolement,1974-11-01,1,['83.060'],ISO/TC
• ISO 2951:201255605,IS,,ISO 2951:2012,"Rubber, vulcanized or thermoplastic — Determination of insulation resistance",Caoutchouc vulcanisé ou thermoplastique — Détermination de la résistance d'is
• ISO 2953:19758000,IS,,ISO 2953:1975,Balancing machines — Description and evaluation,"Machines à équilibrer — Description, caractéristiques et possibilités",1975-06-01,1,['21.120.40'],ISO/TC 108
• ISO 2953:19858001,IS,,ISO 2953:1985,Balancing machines — Description and evaluation,"Machines à équilibrer — Description, caractéristiques et possibilités",1985-10-31,2,['21.120.40'],ISO/TC 108
• ISO 2953:19991733,IS,,ISO 2953:1999,Mechanical vibration — Balancing machines — Description and evaluation,Vibrations mécaniques — Machines à équilibrer — Description et évaluation,1999-04-22,3
• ISO 2954:19758003,IS,,ISO 2954:1975,Mechanical vibration of rotating and reciprocating machinery — Requirements for instruments for measuring vibration severity,Vibrations mécaniques des machin
• ISO 2958:19738006,IS,,ISO 2958:1973,Road vehicles — Exterior protection for passenger cars,Véhicules routiers — Protection extérieure des voitures particulières,1973-09-01,1,['43.040.80'],ISO/T
• ISO 2959:19738007,IS,,ISO 2959:1973,Textiles — Woven fabric descriptions,Textiles — Désignation des tissus,1973-12-01,1,['59.080.30'],ISO/TC 38/SC 20,9599,,[59544],"['en','fr']",1
• ISO 2960:19748008,IS,,ISO 2960:1974,Textiles — Determination of bursting strength and bursting distension — Diaphragm method,Textiles — Détermination de la force d'éclatement et de la déformati
• ISO 2962:19748010,IS,,ISO 2962:1974,Cheese and processed cheese products — Determination of phosphorus content (Reference method),Fromages et fromages fondus — Détermination de la teneur en pho
• ISO 2962:19848011,IS,,ISO 2962:1984,Cheese and processed cheese products — Determination of total phosphorus content — Molecular absorption spectrometric method,Fromages et fromages fondus — Dé
• ISO 2963:19748012,IS,,ISO 2963:1974,Cheese and processed cheese products — Determination of citric acid content (Reference method),Fromages et fromages fondus — Détermination de la teneur en ac
• ISO 2963:19978013,IS,,ISO 2963:1997,Cheese and processed cheese products — Determination of citric acid content — Enzymatic method,Fromages et fromages fondus — Détermination de la teneur en ac
• ISO 2964:19748014,IS,,ISO 2964:1974,Aircraft — Tubing outside diameters and thicknesses — Metric dimensions,Aéronefs — Diamètres extérieurs et épaisseurs des tubes — Dimensions métriques,1974-0
• ISO 2964:19858015,IS,,ISO 2964:1985,Aerospace — Tubing — Outside diameters and thicknesses — Metric dimensions,Aéronautique et espace — Tubes — Diamètres extérieurs et épaisseurs — Dimensions m
• ISO 2965:19798016,IS,,ISO 2965:1979,Material used as cigarette papers — Determination of air permeability,Matériaux utilisés comme papiers à cigarette — Détermination de la perméabilité à l'air
• ISO 2965:19978017,IS,,ISO 2965:1997,"Materials used as cigarette papers, filter plug wrap and filter joining paper, including materials having an oriented permeable zone — Determination of air
• ISO 2965:200952253,IS,,ISO 2965:2009,"Materials used as cigarette papers, filter plug wrap and filter joining paper, including materials having a discrete or oriented permeable zone and materia
• ISO 2966:19828018,IS,,ISO 2966:1982,Cinematography — 16 mm motion-picture film perforated 8 mm Type S (1-3) and (1-4) — Cutting and perforating dimensions,Cinématographie — Film cinématographiq
• ISO 2969:19778022,IS,,ISO 2969:1977,Cinematography — Electro-acoustic response of motion-picture control rooms and indoor theatres — Specifications and measurements,Cinématographie — Réponse él
• ISO 2969:19878023,IS,,ISO 2969:1987,Cinematography — B-chain electro-acoustic response of motion-picture control rooms and indoor theatres — Specifications and measurements,Réponse électro-acou
• ISO 2971:19768025,IS,,ISO 2971:1976,Tobacco and tobacco products — Cigarettes and filters — Determination of nominal diameter,Tabac et produits du tabac — Cigarettes et filtres — Détermination
• ISO 2971:19878026,IS,,ISO 2971:1987,Cigarettes and filters — Determination of nominal diameter — Pneumatic method,Cigarettes et filtres — Détermination du diamètre nominal — Méthode pneumatique
• ISO 2971:199823324,IS,,ISO 2971:1998,Cigarettes and filter rods — Determination of nominal diameter — Method using a laser beam measuring apparatus,Cigarettes et bâtonnets-filtres — Déterminati
• ISO 2974:19898028,IS,,ISO 2974:1989,Road vehicles — High-pressure fuel injection pipe end-connections with 60 degrees female cone,Véhicules routiers — Raccords à cône femelle de 60 degrés pour
• ISO 2974:19908029,IS,,ISO 2974:1990,Road vehicles — High-pressure fuel injection pipe end-connections with 60 degree female cone,Véhicules routiers — Raccords à cône femelle de 60 degrés pour l
• ISO 2974:199422120,IS,,ISO 2974:1994,Diesel engines — High-pressure fuel injection pipe end-connections with 60 degree female cone,Moteurs diesels — Raccords finaux à cône femelle de 60 degrés
• ISO 2974:200030504,IS,,ISO 2974:2000,Diesel engines — High-pressure fuel injection pipe end-connections with 60 degree female cone,Moteurs diesels — Raccords finaux à cône femelle de 60 degrés
• ISO 2974:200536626,IS,,ISO 2974:2005,Diesel engines — High-pressure fuel injection pipe end-connections with 60 degrees female cone,Moteurs diesels — Raccords finaux à cône femelle de 60 degrés
• ISO 2974:201352964,IS,,ISO 2974:2013,Diesel engines — 60 degree female cones for high-pressure fuel injection components,Moteurs diesels — Raccords finaux à cône femelle de 60 degrés pour ligne
• ISO 2974:201669500,IS,,ISO 2974:2016,Diesel engines — 60° female cones for high-pressure fuel injection components,Moteurs diesels — Raccords finaux à cône femelle de 60° pour lignes d'injectio
• ISO 2976:19738035,IS,,ISO 2976:1973,Abrasive belts — Selection of width/length combinations,Bandes abrasives — Sélection des combinaisons largeurs x longueurs,1973-11-01,1,['25.100.70'],ISO/TC
• ISO 2977:19748036,IS,,ISO 2977:1974,Petroleum products and hydrocarbon solvents — Determination of aniline point and mixed aniline point,Produits pétroliers et solvants hydrocarbonés — Détermin
• ISO 2977:19898037,IS,,ISO 2977:1989,Petroleum products and hydrocarbon solvents — Determination of aniline point and mixed aniline point,Produits pétroliers et solvants hydrocarbonés — Détermin
• ISO 2977:1989/Cor 1:199221205,IS,Cor,ISO 2977:1989/Cor 1:1992,Petroleum products and hydrocarbon solvents — Determination of aniline point and mixed aniline point — Technical Corrigendum 1,Produits pétrol
• ISO 2982-1:199520519,IS,,ISO 2982-1:1995,Rolling bearings — Accessories — Part 1: Tapered sleeves — Dimensions,Roulements — Accessoires — Partie 1: Manchons coniques — Dimensions,1995-08-24,1,['2
• ISO 2982-2:199520516,IS,,ISO 2982-2:1995,Rolling bearings — Accessories — Part 2: Locknuts and locking devices — Dimensions,Roulements — Accessoires — Partie 2: Écrous à encoches et dispositifs d
• ISO 2982-2:200132056,IS,,ISO 2982-2:2001,Rolling bearings — Accessories — Part 2: Locknuts and locking devices — Dimensions,Roulements — Accessoires — Partie 2: Écrous à encoches et dispositifs d
• ISO 2982:19728038,IS,,ISO 2982:1972,"Rolling bearings — Locknuts, narrow series, and lockwashers with straight inner tab","Roulements — Écrous à encoches, série étroite, et rondelles-frein à la
• ISO 3001:19788051,IS,,ISO 3001:1978,Plastics — Epoxide compounds — Determination of epoxide equivalent,Plastiques — Compositions époxydiques — Détermination de l'équivalent époxyde,1978-09-01,2
• ISO 3001:199727203,IS,,ISO 3001:1997,Plastics — Epoxy compounds — Determination of epoxy equivalent,Plastiques — Compositions époxydiques — Détermination de l'équivalent époxyde,1997-03-06,3,['
• ISO 3003:19748059,IS,,ISO 3003:1974,Dried-milk borers,Sondes à lait sec,1974-03-01,1,['67.100.10'],ISO/TC 34/SC 5,9599,,[4916],"['en','fr']",2
• ISO 3004-1:19798060,IS,,ISO 3004-1:1979,Hermetically sealed metal containers for food and drinks — Part 1: Round open-top general purpose food cans,"Récipients métalliques étanches pour denrées a

← records 2,801–3,200 · All of Withdrawn and superseded ISO standards · records 3,601 on →