Records 3,601–4,000 — Withdrawn and superseded ISO standards

Records 3,601 to 4,000 of 24,640. Each links to its own page, which carries the source URL and the quoted line that states the value.

• ISO 3004-1:1979/Amd 1:19818063,IS,Amd,ISO 3004-1:1979/Amd 1:1981,Hermetically sealed metal containers for food and drinks — Part 1: Round open-top general purpose food cans — Amendment 1,"Récipients métalli
• ISO 3004-1:19868061,IS,,ISO 3004-1:1986,Light gauge metal containers — Capacities and related cross-sections — Part 1: Open-top cans for general food,Récipients métalliques légers — Capacités et
• ISO 3004-2:19798064,IS,,ISO 3004-2:1979,Hermetically sealed metal containers for food and drinks — Part 2: Food cans for meat and products containing meat for human consumption,Récipients métalli
• ISO 3004-2:19898065,IS,,ISO 3004-2:1989,Light gauge metal containers — Capacities and related cross-sections — Part 2: Open-top cans for meat and products containing meat for human consumption,Ré
• ISO 3004-3:19818067,IS,,ISO 3004-3:1981,Hermetically sealed metal containers for food and drinks — Part 3: Cans for drinks,Récipients métalliques étanches pour denrées alimentaires et boissons —
• ISO 3004-3:19868068,IS,,ISO 3004-3:1986,Light gauge metal containers — Capacities and related cross-sections — Part 3: Open-top cans for drinks,Récipients métalliques légers — Capacités et sectio
• ISO 3004-4:19808070,IS,,ISO 3004-4:1980,Hermetically sealed metal containers for food and drinks — Part 4: Cans for edible oil,Récipients métalliques étanches pour denrées alimentaires et boisson
• ISO 3004-4:19868071,IS,,ISO 3004-4:1986,Light gauge metal containers — Capacities and related cross-sections — Part 4: Open-top cans for edible oil,Récipients métalliques légers — Capacités et se
• ISO 3004-5:19888073,IS,,ISO 3004-5:1988,Light gauge metal containers — Capacities and related cross-sections — Part 5: Open-top cans for fish and other fishery products,Récipients métalliques lég
• ISO 3004-6:19868075,IS,,ISO 3004-6:1986,Light gauge metal containers — Capacities and related cross-sections — Part 6: Open-top cans for milk,Récipients métalliques légers — Capacités et sections
• ISO 3006:19768078,IS,,ISO 3006:1976,Road vehicles — Passenger car wheels — Test method,Véhicules routiers — Roues pour voitures particulières — Méthodes d'essai,1976-12-01,2,['43.040.50'],ISO/T
• ISO 3006:19958079,IS,,ISO 3006:1995,Passenger car road wheels — Test methods,Roues pour voitures particulières — Méthodes d'essai,1995-02-02,3,['43.040.50'],ISO/TC 22,9599,[8078],[39420],"['en'
• ISO 3006:200539420,IS,,ISO 3006:2005,Road vehicles — Passenger car wheels for road use — Test methods,Véhicules routiers — Roues pour voitures particulières pour utilisation sur routes — Méthod
• ISO 3007:19748080,IS,,ISO 3007:1974,Petroleum products — Determination of vapour pressure — Reid method,Produits pétroliers — Détermination de la pression de vapeur — Méthode Reid,1974-11-01,1,
• ISO 3007:19868081,IS,,ISO 3007:1986,Petroleum products — Determination of vapour pressure — Reid method,Produits pétroliers — Détermination de la pression de vapeur — Méthode Reid,1986-05-22,2,
• ISO 3008-1:201973900,IS,,ISO 3008-1:2019,Fire resistance tests — Door and shutter assemblies — Part 1: General requirements,Essais de résistance au feu — Assemblages de portes et volets — Partie
• ISO 3008-2:201459989,IS,,ISO 3008-2:2014,Fire-resistance tests — Part 2: Lift landing door assemblies,Essais de résistance au feu — Partie 2: Assemblage de porte palière d'ascenseur,2014-04-09,1,
• ISO 3008:19768083,IS,,ISO 3008:1976,Fire-resistance tests — Door and shutter assemblies,Essais de résistance au feu — Portes et fermetures,1976-04-01,1,"['13.220.50','91.060.50']",ISO/TC 92,959
• ISO 3008:1976/Amd 1:19848084,IS,Amd,ISO 3008:1976/Amd 1:1984,Fire-resistance tests — Door and shutter assemblies — Amendment 1,Essais de résistance au feu — Portes et fermetures — Amendement 1,1984-10-01,
• ISO 3008:200635265,IS,,ISO 3008:2006,Fire resistance tests — Door and shutter assemblies,Essais de résistance au feu — Assemblages porte et volet,2006-10-31,2,"['13.220.50','91.060.50']",ISO/TC
• ISO 3008:200745472,IS,,ISO 3008:2007,Fire-resistance tests — Door and shutter assemblies,Essais de résistance au feu — Assemblages porte et volet,2007-09-13,3,"['13.220.50','91.060.50']",ISO/TC
• ISO 3009:19768085,IS,,ISO 3009:1976,Fire-resistance tests — Glazed elements,Essais de résistance au feu — Eléments en verre,1976-09-01,1,"['81.040.20','13.220.50']",ISO/TC 92,9599,,"[25598,3741
• ISO 3009:1976/Amd 1:19848086,IS,Amd,ISO 3009:1976/Amd 1:1984,Fire-resistance tests — Glazed elements — Amendment 1,Essais de résistance au feu — Eléments en verre — Amendement 1,1984-10-01,1,"['81.040.20'
• ISO 3010:19888087,IS,,ISO 3010:1988,Bases for design of structures — Seismic actions on structures,Bases du calcul des constructions — Actions sismiques sur les structures,1988-07-07,1,"['91.08
• ISO 3010:200125368,IS,,ISO 3010:2001,Basis for design of structures — Seismic actions on structures,Bases du calcul des constructions — Actions sismiques sur les structures,2001-12-20,2,"['91.0
• ISO 3011:19818088,IS,,ISO 3011:1981,Rubber or plastics coated fabrics — Determination of resistance to ozone cracking under static conditions,Supports textiles revêtus de caoutchouc ou de plast
• ISO 3011:199720150,IS,,ISO 3011:1997,Rubber- or plastics-coated fabrics — Determination of resistance to ozone cracking under static conditions,Supports textiles revêtus de caoutchouc ou de pla
• ISO 3012:19748089,IS,,ISO 3012:1974,Aviation turbine fuels — Determination of mercaptan sulphur — Amperometric and potentiometric methods,Carburants aviation pour turbines — Dosage du soufre so
• ISO 3012:19918090,IS,,ISO 3012:1991,"Gasoline, kerosine and distillate fuels — Determination of mercaptan sulfur — Potentiometric method","Essence, pétroles lampants et fuel-oils distillés — Do
• ISO 3013:19748091,IS,,ISO 3013:1974,Aviation fuels — Determination of freezing point,Carburants aviation — Détermination du point de disparition des cristaux,1974-06-01,1,['75.160.20'],ISO/TC 2
• ISO 3014:19818092,IS,,ISO 3014:1981,Aviation turbine fuels — Determination of smoke point,Carburants aviation pour moteurs à réaction — Détermination du point de fumée,1981-12-01,2,['75.160.20'
• ISO 3015:19748094,IS,,ISO 3015:1974,Petroleum oils — Determination of cloud point,Huiles de pétrole — Détermination du point de trouble,1974-05-01,1,['75.100'],ISO/TC 28,9599,,[8095],"['en','fr
• ISO 3015:19928095,IS,,ISO 3015:1992,Petroleum products — Determination of cloud point,Produits pétroliers — Détermination du point de trouble,1992-08-27,2,['75.080'],ISO/TC 28,9599,[8094],"[622
• ISO 3016:19748096,IS,,ISO 3016:1974,Petroleum oils — Determination of pour point,Huiles de pétrole — Détermination du point d'écoulement,1974-05-01,1,['75.080'],ISO/TC 28,9599,,[20721],"['en','
• ISO 3016:199420721,IS,,ISO 3016:1994,Petroleum products — Determination of pour point,Produits pétroliers — Détermination du point d'écoulement,1994-08-04,2,['75.080'],ISO/TC 28,9599,[8096],"[4
• ISO 3017:19818097,IS,,ISO 3017:1981,"Abrasive discs — Designation, dimensions and tolerances — Selection of disc outside diameter/centre hole diameter combinations","Disques abrasifs — Désignat
• ISO 3019-1:19758099,IS,,ISO 3019-1:1975,Hydraulic fluid power — Positive displacement pumps and motors — Dimensions and identification code for mounting flanges and shaft ends — Part 1: Inch seri
• ISO 3019-2:19808100,IS,,ISO 3019-2:1980,Hydraulic fluid power — Positive displacement pumps and motors — Dimensions and identification code for mounting flanges and shaft ends — Part 2: 2 and 4-h
• ISO 3019-2:19868101,IS,,ISO 3019-2:1986,Hydraulic fluid power — Positive displacement pumps and motors — Dimensions and identification code for mounting flanges and shaft ends — Part 2: Two- and
• ISO 3019-3:19818102,IS,,ISO 3019-3:1981,Hydraulic fluid power — Positive displacement pumps and motors — Dimensions and identification code for mounting flanges and shaft ends — Part 3: Polygonal
• ISO 3019-3:19888103,IS,,ISO 3019-3:1988,Hydraulic fluid power — Positive displacement pumps and motors — Dimensions and identification code for mounting flanges and shaft ends — Part 3: Polygonal
• ISO 3022:19828104,IS,,ISO 3022:1982,Cinematography — 35 mm motion-picture film perforated 16 mm (1-3-0) — Cutting and perforating dimensions,Cinématographie — Film cinématographique 35 mm à per
• ISO 3023:19848106,IS,,ISO 3023:1984,Cinematography — 65 and 70 mm unexposed motion-picture film — Cutting and perforating dimensions,Cinématographie — Films cinématographiques vierges 65 mm et
• ISO 3023:19888107,IS,,ISO 3023:1988,Cinematography — 65 mm and 70 mm unexposed motion-picture film — Cutting and perforating dimensions,Cinématographie — Films cinématographiques vierges 65 mm
• ISO 3026:19758110,IS,,ISO 3026:1975,"Cinematography — Printed 8 mm Type S image area on 35 mm motion-picture film perforated 8 mm Type S, 2R-4.227 (1664) or 5R-4.234 (1667) — Position and dimen
• ISO 3027:19758111,IS,,ISO 3027:1975,Cinematography — Magnetic stripes and recording head gaps for sound record on 8 mm Type S motion-picture prints — Positions and width dimensions,Cinématograp
• ISO 3028:19748113,IS,,ISO 3028:1974,Photography — Expendable photoflash lamps — Determination of relative spectral energy distribution for calculation of spectral distribution index,Photographi
• ISO 3029:19838115,IS,,ISO 3029:1983,"Photography — 126-size cartridges — Dimensions of cartridge, film and backing paper","Photographie — Chargeur format 126 — Dimensions du chargeur, du film e
• ISO 3030-1:19748116,IS,,ISO 3030-1:1974,Needle roller bearings — Needle roller and cage assemblies — Metric series — Part 1: Radial needle roller and cage assemblies — Boundary dimensions and tol
• ISO 3030:199620524,IS,,ISO 3030:1996,Rolling bearings — Radial needle roller and cage assemblies — Dimensions and tolerances,Roulements — Cages à aiguilles radiales — Dimensions et tolérances,1
• ISO 3030:201150188,IS,,ISO 3030:2011,Rolling bearings — Radial needle roller and cage assemblies — Boundary dimensions and tolerances,Roulements — Cages à aiguilles radiales — Dimensions d'enco
• ISO 3031:19798117,IS,,ISO 3031:1979,"Needle roller bearings — Thrust needle roller and cage assemblies, thrust washers — Dimensions and tolerances",Roulements à aiguilles — Cages à aiguilles ax
• ISO 3031:200020527,IS,,ISO 3031:2000,"Rolling bearings — Thrust needle roller and cage assemblies, thrust washers — Boundary dimensions and tolerances",Roulements — Cages à aiguilles axiales et
• ISO 3033:19758118,IS,,ISO 3033:1975,Oil of spearmint,Huile essentielle de menthe crépue,1975-02-01,1,['71.100.60'],ISO/TC 54,9599,,[8119],"['en','fr']",2
• ISO 3033:19888119,IS,,ISO 3033:1988,Oil of spearmint (Mentha spicata Linnaeus),Huile essentielle de menthe verte ou de menthe crépue (Mentha spicata Linnaeus),1988-07-07,2,['71.100.60'],ISO/TC
• ISO 3034:19758120,IS,,ISO 3034:1975,Corrugated fibreboard — Determination of thickness,Carton ondulé — Détermination de l'épaisseur,1975-05-01,1,['85.060'],ISO/TC 6/SC 2,9599,,[51266],"['en','f
• ISO 3035:19828121,IS,,ISO 3035:1982,Single-faced and single-wall corrugated fibreboard — Determination of flat crush resistance,Carton ondulé simple face et double face — Détermination de la ré
• ISO 3035:201151267,IS,,ISO 3035:2011,Corrugated fibreboard — Determination of flat crush resistance,Carton ondulé — Détermination de la résistance à la compression à plat,2011-10-26,3,['85.080.
• ISO 3036:19758122,IS,,ISO 3036:1975,Board — Determination of puncture resistance,Carton — Détermination de la résistance à la perforation,1975-06-01,1,['85.060'],ISO/TC 6/SC 2,9599,,"[85332,690
• ISO 3037:19828123,IS,,ISO 3037:1982,Corrugated fibreboard — Determination of edgewise crush resistance,Carton ondulé — Détermination de la résistance à la compression de chant,1982-12-01,2,['85
• ISO 3037:199422209,IS,,ISO 3037:1994,Corrugated fibreboard — Determination of edgewise crush resistance (Unwaxed edge method),Carton ondulé — Détermination de la résistance à la compression sur
• ISO 3037:200740155,IS,,ISO 3037:2007,Corrugated fibreboard — Determination of edgewise crush resistance (unwaxed edge method),Carton ondulé — Détermination de la résistance à la compression sur
• ISO 3037:201360354,IS,,ISO 3037:2013,Corrugated fibreboard — Determination of edgewise crush resistance (unwaxed edge method),Carton ondulé — Détermination de la résistance à la compression sur
• ISO 3039:19758125,IS,,ISO 3039:1975,Corrugated fibreboard — Determination of the grammage of the component papers after separation,Carton ondulé — Détermination du grammage des papiers composan
• ISO 3040:19748126,IS,,ISO 3040:1974,Technical drawings — Dimensioning and tolerancing cones,Dessins techniques — Cotation et tolérancement des éléments coniques,1974-06-01,1,['01.100.20'],ISO/T
• ISO 3040:19908127,IS,,ISO 3040:1990,Technical drawings — Dimensioning and tolerancing — Cones,Dessins techniques — Cotation et tolérancement — Cônes,1990-12-06,2,['01.100.20'],ISO/TC 213,9599,[
• ISO 3040:200953952,IS,,ISO 3040:2009,Geometrical product specifications (GPS) — Dimensioning and tolerancing — Cones,Spécification géométrique des produits (GPS) — Cotation et tolérancement — C
• ISO 3042:19838129,IS,,ISO 3042:1983,Cinematography — Labelling of containers for unexposed motion-picture films and magnetic films — Minimum information specifications,Cinématographie — Étiquet
• ISO 3043:19758131,IS,,ISO 3043:1975,Oil of pimento berry,Huile essentielle de baies de piment dit de la Jamaïque,1975-02-01,1,['71.100.60'],ISO/TC 54,9599,,[8132],"['en','fr']",1
• ISO 3044:19748133,IS,,ISO 3044:1974,Oil of Eucalyptus citriodora,Huile essentielle d'Eucalyptus citriodora,1974-08-01,1,['71.100.60'],ISO/TC 54,9599,,[8134],"['en','fr']",2
• ISO 3044:19978134,IS,,ISO 3044:1997,Oil of eucalyptus citriodora Hook.,Huile essentielle d'Eucalyptus citriodora Hook.,1997-07-10,2,['71.100.60'],ISO/TC 54,9599,[8133],[77267],"['en','fr']",5
• ISO 3045:19748135,IS,,ISO 3045:1974,Oil of bay,Huile essentielle de bay,1974-03-01,1,['71.100.60'],ISO/TC 54,9599,,"[8136,35233]","['en','fr']",1
• ISO 3046-1:19818137,IS,,ISO 3046-1:1981,"Reciprocating internal combustion engines — Performance — Part 1: Standard reference conditions and declarations of power, fuel consumption and lubricatin
• ISO 3046-1:19868138,IS,,ISO 3046-1:1986,"Reciprocating internal combustion engines — Performance — Part 1: Standard reference conditions and declarations of power, fuel consumption and lubricatin
• ISO 3046-1:1986/Amd 1:19878140,IS,Amd,ISO 3046-1:1986/Amd 1:1987,"Reciprocating internal combustion engines — Performance — Part 1: Standard reference conditions and declarations of power, fuel consumption
• ISO 3046-1:19958139,IS,,ISO 3046-1:1995,"Reciprocating internal combustion engines — Performance — Part 1: Standard reference conditions, declarations of power, fuel and lubricating oil consumpti
• ISO 3046-2:19778142,IS,,ISO 3046-2:1977,Reciprocating internal combustion engines — Performance — Part 2: Test methods,Moteurs alternatifs à combustion interne — Performances — Partie 2: Méthodes
• ISO 3046-2:19878143,IS,,ISO 3046-2:1987,Reciprocal internal combustion engines — Performance — Part 2: Test methods,Moteurs alternatifs à combustion interne — Performances — Partie 2: Méthodes d'
• ISO 3046-3:19798144,IS,,ISO 3046-3:1979,Reciprocating internal combustion engines : Performance — Part 3: Test measurements,Moteurs alternatifs à combustion interne — Performances — Partie 3: Mes
• ISO 3046-3:19898145,IS,,ISO 3046-3:1989,Reciprocating internal combustion engines — Performance — Part 3: Test measurements,Moteurs alternatifs à combustion interne — Performances — Partie 3: Mes
• ISO 3046-4:19788146,IS,,ISO 3046-4:1978,Reciprocating internal combustion engines — Performance — Part 4: Speed governing,Moteurs alternatifs à combustion interne — Performances — Partie 4: Régul
• ISO 3046-4:19978147,IS,,ISO 3046-4:1997,Reciprocating internal combustion engines — Performance — Part 4: Speed governing,Moteurs alternatifs à combustion interne — Performances — Partie 4: Régul
• ISO 3046-5:19788148,IS,,ISO 3046-5:1978,Reciprocating internal combustion engines — Performance — Part 5: Torsional vibrations,Moteurs à combustion interne — Performances — Partie 5: Vibrations d
• ISO 3046-6:19828149,IS,,ISO 3046-6:1982,Reciprocating internal combustion engines — Performance — Part 6: Overspeed protection,Moteurs alternatifs à combustion interne — Performances — Partie 6:
• ISO 3046-6:19908150,IS,,ISO 3046-6:1990,Reciprocating internal combustion engines — Performance — Part 6: Overspeed protection,Moteurs alternatifs à combustion interne — Performances — Partie 6:
• ISO 3046-7:19878152,IS,,ISO 3046-7:1987,Reciprocating internal combustion engines — Performance — Part 7: Codes for engine power,Moteurs alternatifs à combustion interne — Performances — Partie 7
• ISO 3046-7:19958153,IS,,ISO 3046-7:1995,Reciprocating internal combustion engines — Performance — Part 7: Codes for engine power,Moteurs alternatifs à combustion interne — Performances — Partie 7
• ISO 3053:19758159,IS,,ISO 3053:1975,Oil of grapefruit (obtained by expression),Huile essentielle de pomélo (obtenue par expression),1975-03-01,1,['71.100.60'],ISO/TC 54,9599,,"[32040,8160]","['
• ISO 3054:19768161,IS,,ISO 3054:1976,Oil of lavandin abrialis,Huile essentielle de lavandin abrialis,1976-12-01,1,['71.100.60'],ISO/TC 54,9599,,[8162],"['en','fr']",2
• ISO 3054:19878162,IS,,ISO 3054:1987,"Oil of lavandin abrialis (Lavandula angustifolia P. Miller x Lavandula latifolia (Linnaeus f.) Medikus), France","Huile essentielle de lavandin abrialis (La
• ISO 3054:200128589,IS,,ISO 3054:2001,"Oil of lavandin Abrial (Lavandula angustifolia Miller x Lavandula latifolia Medikus), French type","Huile essentielle de lavandin Abrial (Lavandula angusti
• ISO 3054:201767961,IS,,ISO 3054:2017,"Essential oil of lavandin Abrial (Lavandula angustifolia Mill. × Lavandula latifolia Medik.), French type","Huile essentielle de lavandin Abrial (Lavandula
• ISO 3055:19748163,IS,,ISO 3055:1974,Kitchen equipment — Co-ordinating sizes,Équipement de cuisine — Dimensions de coordination,1974-11-01,1,['97.040.01'],ISO/TC 59,9599,,[8164],"['en','fr']",2
• ISO 3055:19858164,IS,,ISO 3055:1985,Kitchen equipment — Coordinating sizes,Équipement de cuisine — Dimensions de coordination,1985-05-02,2,['97.040.01'],ISO/TC 136,9599,[8163],"[73868,62196,290
• ISO 3056:19748165,IS,,ISO 3056:1974,Non-calibrated round steel link lifting chain and chain slings — Safe use and maintenance,Chaînes de levage non calibrées en acier rond et élingues à chaînes
• ISO 3057:19748167,IS,,ISO 3057:1974,Non-destructive testing — Metallographic replica techniques of surface examination,Essais non destructifs — Techniques de réplique métallographique pour l'ex
• ISO 3058:19748168,IS,,ISO 3058:1974,Non-destructive testing — Aids to visual inspection — Selection of low-power magnifiers,Essais non destructifs — Moyens d'examen visuel — Choix des loupes à
• ISO 3059:19748169,IS,,ISO 3059:1974,Non-destructive testing — Method for indirect assessment of black light sources,Essais non destructifs — Méthode d'évaluation indirecte des sources de lumièr
• ISO 3059:200132510,IS,,ISO 3059:2001,Non-destructive testing — Penetrant testing and magnetic particle testing - Viewing conditions,Essais non destructifs — Essai par ressuage et essai par magn
• ISO 3061:19798171,IS,,ISO 3061:1979,Oil of black pepper,Huile essentielle de poivre noir,1979-09-01,1,['71.100.60'],ISO/TC 54,9599,,"[8172,41617]","['en','fr']",2
• ISO 3063:19838174,IS,,ISO 3063:1983,Oil of ylang-ylang (Cananga odorata (Lamark) J.D. Hooker and Thomson)),Huile essentielle d'ylang-ylang (Cananga odorata (Lamark) J.D. Hooker et Thomson),1983
• ISO 3064:19778175,IS,,ISO 3064:1977,"Oil of petitgrain, Paraguay","Huile essentielle de Petitgrain, Paraguay",1977-02-01,1,['71.100.60'],ISO/TC 54,9599,,"[33775,8176]","['en','fr']",2
• ISO 3064:200033775,IS,,ISO 3064:2000,"Oil of petitgrain, Paraguayan type (Citrus aurantium L. ssp. aurantium, syn. Citrus aurantium L. ssp. amara var. pumilia)","Huile essentielle de petitgrain
• ISO 3065:19748177,IS,,ISO 3065:1974,"Oil of Australian Eucalyptus, 80 to 85 % cineole content","Huile essentielle d'Eucalyptus d'Australie, de teneur en cinéole 80 à 85 %",1974-03-01,1,['71.100
• ISO 3065:201152141,IS,,ISO 3065:2011,"Oil of eucalyptus Australian type, containing a volume fraction of 80 % to 85 % of 1,8-cineole","Huile essentielle d'eucalyptus, type Australie, contenant
• ISO 3066:19748179,IS,,ISO 3066:1974,Duplicating machines — Registration,Duplicateurs — Tolérances de repérage,1974-08-01,1,['37.100.10'],ISO/IEC JTC 1,9599,,[8180],"['en','fr']",3
• ISO 3069:19748183,IS,,ISO 3069:1974,End suction centrifugal pumps — Dimensions of cavities for mechanical seals and for soft packing,Pompes centrifuges à aspiration en bout — Dimensions des log
• ISO 3070-0:19828185,IS,,ISO 3070-0:1982,Acceptance conditions for boring and milling machines with horizontal spindle — Testing of the accuracy — Part 0: General introduction,"Conditions de récep
• ISO 3070-1:19758186,IS,,ISO 3070-1:1975,Test conditions for boring and milling machines with horizontal spindle — Testing of the accuracy — Part 1: Table type machines,"Conditions d'essais des ma
• ISO 3070-1:1975/Add 1:19768188,IS,Add,ISO 3070-1:1975/Add 1:1976,Test conditions for boring and milling machines with horizontal spindle — Testing of the accuracy — Part 1: Table type machines — Addendum 1,
• ISO 3070-1:19878187,IS,,ISO 3070-1:1987,Acceptance conditions for boring and milling machines with horizontal spindle — Testing of the accuracy — Part 1: Table-type machines,"Conditions de récept
• ISO 3070-2:19788190,IS,,ISO 3070-2:1978,Test conditions for boring and milling machines with horizontal spindle — Testing of the accuracy — Part 2: Floor type machines,Conditions d'essai des mach
• ISO 3070-2:199724673,IS,,ISO 3070-2:1997,Test conditions for boring and milling machines with horizontal spindle — Testing of the accuracy — Part 2: Table-type machines,"Conditions d'essai des ma
• ISO 3070-2:200737686,IS,,ISO 3070-2:2007,Machine tools — Test conditions for testing the accuracy of boring and milling machines with horizontal spindle — Part 2: Machines with movable column and
• ISO 3070-3:19978191,IS,,ISO 3070-3:1997,"Test conditions for boring and milling machines with horizontal spindle — Testing of the accuracy — Part 3: Floor type machines with detached, stationary
• ISO 3070-4:199824672,IS,,ISO 3070-4:1998,Test conditions for boring and milling machines with horizontal spindle — Testing of the accuracy — Part 4: Planer type machines with movable column,"Cond
• ISO 3071:19808193,IS,,ISO 3071:1980,Textiles — Determination of pH of the aqueous extract,Textiles — Détermination du pH de l'extrait aqueux,1980-10-01,2,['59.080.01'],ISO/TC 38,9599,,[35252],"
• ISO 3071:200535252,IS,,ISO 3071:2005,Textiles — Determination of pH of aqueous extract,Textiles — Détermination du pH de l'extrait aqueux,2005-07-13,3,['59.080.01'],ISO/TC 38,9599,[8193],[74203
• ISO 3074:19758196,IS,,ISO 3074:1975,Wool — Determination of dichloromethane-soluble matter in combed sliver,Laine — Détermination de l'extrait dichlorométhanique dans un ruban de peigné,1975-12
• ISO 3075:19808197,IS,,ISO 3075:1980,"Short link chain for lifting purposes — Grade S (6) non calibrated, for chain slings etc.","Chaînes de levage à maillons courts — Classe S (6), non calibrée
• ISO 3076:19808199,IS,,ISO 3076:1980,"Short link chains for lifting purposes — Grade T (8), non-calibrated, for chain slings, etc.","Chaînes de levage à maillons courts, Classe T (8), non calibr
• ISO 3076:19848200,IS,,ISO 3076:1984,"Short link chain for lifting purposes — Grade T (8), non-calibrated, for chain slings etc.","Chaînes de levage à maillons courts, classe T (8), non calibrée
• ISO 3077:19808202,IS,,ISO 3077:1980,"Short link chain for lifting purposes — Grade T (8), calibrated, for chain hoists and other lifting appliances","Chaînes de levage à maillons courts, classe
• ISO 3077:19848203,IS,,ISO 3077:1984,"Short link chain for lifting purposes — Grade T (8), calibrated, for chain hoists and other lifting appliances","Chaînes de levage à maillons courts, classe
• ISO 3078:19748205,IS,,ISO 3078:1974,Shipbuilding — Cargo winches,Construction navale — Treuils de charge,1974-04-01,1,['47.020.40'],ISO/TC 8/SC 4,9599,,[8206],"['en','fr']",4
• ISO 3078:19878206,IS,,ISO 3078:1987,Shipbuilding — Cargo winches,Construction navale — Treuils de charge,1987-05-21,2,['47.020.40'],ISO/TC 8/SC 4,9599,[8205],[65511],"['en','fr']",4
• ISO 3081:19868209,IS,,ISO 3081:1986,Iron ores — Increment sampling — Manual method,Minerais de fer — Échantillonnage par prélèvements — Méthode manuelle,1986-05-08,2,['73.060.10'],ISO/TC 102/SC
• ISO 3082:19878210,IS,,ISO 3082:1987,Iron ores — Increment sampling and sample preparation — Mechanical method,Minerais de fer — Échantillonnage par prélèvements et préparation des échantillons
• ISO 3082:19988211,IS,,ISO 3082:1998,Iron ores — Sampling and sample preparation procedures,Minerais de fer — Procédures d'échantillonnage et de préparation des échantillons,1998-08-13,2,['73.06
• ISO 3082:200034366,IS,,ISO 3082:2000,Iron ores — Sampling and sample preparation procedures,Minerais de fer — Procédures d'échantillonnage et de préparation des échantillons,2000-12-21,3,['73.0
• ISO 3082:200943285,IS,,ISO 3082:2009,Iron ores — Sampling and sample preparation procedures,Minerais de fer — Procédures d'échantillonnage et de préparation des échantillons,2009-05-26,4,['73.0
• ISO 3082:2009/Cor 1:200954923,IS,Cor,ISO 3082:2009/Cor 1:2009,Iron ores — Sampling and sample preparation procedures — Technical Corrigendum 1,Minerais de fer — Procédures d'échantillonnage et de préparat
• ISO 3083:19868213,IS,,ISO 3083:1986,Iron ores — Preparation of samples — Manual method,Minerais de fer — Préparation des échantillons — Méthode manuelle,1986-10-23,2,['73.060.10'],ISO/TC 102/SC
• ISO 3084:19758214,IS,,ISO 3084:1975,Iron ores — Experimental methods for evaluation of quality variation,Minerais de fer — Méthodes expérimentales d'évaluation de la variation de qualité,1975-0
• ISO 3084:19868215,IS,,ISO 3084:1986,Iron ores — Experimental methods for evaluation of quality variation,Minerais de fer — Méthodes expérimentales d'évaluation de la variation de qualité,1986-1
• ISO 3085:19758217,IS,,ISO 3085:1975,Iron ores — Experimental methods for checking the precision of sampling,Minerais de fer — Méthodes expérimentales de contrôle de la fidélité de l'échantillon
• ISO 3085:19868218,IS,,ISO 3085:1986,Iron ores — Experimental methods for checking the precision of sampling,Minerais de fer — Méthodes expérimentales de contrôle de la fidélité de l'échantillon
• ISO 3085:199620682,IS,,ISO 3085:1996,Iron ores — Experimental methods for checking the precision of sampling,Minerais de fer — Méthodes expérimentales de contrôle de la fidélité de l'échantillo
• ISO 3085:200232136,IS,,ISO 3085:2002,"Iron ores — Experimental methods for checking the precision of sampling, sample preparation and measurement","Minerais de fer — Méthodes expérimentales de
• ISO 3086:19748220,IS,,ISO 3086:1974,Iron ores — Experimental methods for checking the bias of sampling,Minerais de fer — Méthodes expérimentales de contrôle de l'erreur systématique d'échantill
• ISO 3086:19868221,IS,,ISO 3086:1986,Iron ores — Experimental methods for checking the bias of sampling,Minerais de fer — Méthodes expérimentales de contrôle de l'erreur systématique d'échantill
• ISO 3086:19988222,IS,,ISO 3086:1998,Iron ores — Experimental methods for checking the bias of sampling,Minerais de fer — Méthodes expérimentales de contrôle de l'erreur systématique d'échantill
• ISO 3087:19748223,IS,,ISO 3087:1974,Iron ores — Determination of moisture content,Minerais de fer — Détermination de l'humidité,1974-04-01,1,['73.060.10'],ISO/TC 102/SC 1,9599,,[8224],"['en','f
• ISO 3087:19878224,IS,,ISO 3087:1987,Iron ores — Determination of moisture content of a consignment,Minerais de fer — Détermination de l'humidité d'une livraison,1987-04-09,2,['73.060.10'],ISO/T
• ISO 3087:199821490,IS,,ISO 3087:1998,Iron ores — Determination of moisture content of a lot,Minerais de fer — Détermination de l'humidité d'un lot,1998-12-20,3,['73.060.10'],ISO/TC 102/SC 1,959
• ISO 3087:201151476,IS,,ISO 3087:2011,Iron ores — Determination of the moisture content of a lot,Minerais de fer — Détermination de l'humidité d'un lot,2011-09-30,4,['73.060.10'],ISO/TC 102/SC 1
• ISO 3088:19758225,IS,,ISO 3088:1975,Welding requirements — Factors to be considered in specifying requirements for fusion welded joints in steel (technical influencing factors),Exigences relati
• ISO 3089:19748226,IS,,ISO 3089:1974,"Self centring, manually operated chucks for machine tools — Normal accuracy — Acceptance test specifications (geometrical tests)","Mandrins pour machines-ou
• ISO 3089:19918227,IS,,ISO 3089:1991,Self-centring manually-operated chucks for machine tools — Acceptance test specifications (geometrical tests),"Mandrins pour machines-outils, à serrage conce
• ISO 3093:19828232,IS,,ISO 3093:1982,Cereals — Determination of falling number,Céréales — Détermination de l'indice de chute,1982-02-01,2,['67.060'],ISO/TC 34/SC 4,9599,,"[39483,27890]","['en','
• ISO 3093:200439483,IS,,ISO 3093:2004,"Wheat, rye and respective flours, durum wheat and durum wheat semolina — Determination of the Falling Number according to Hagberg-Perten","Blés tendres, se
• ISO 3093:2004/Cor 1:200851191,IS,Cor,ISO 3093:2004/Cor 1:2008,"Wheat, rye and respective flours, durum wheat and durum wheat semolina — Determination of the Falling Number according to Hagberg-Perten — Te
• ISO 3094:19748233,IS,,ISO 3094:1974,Fruit and vegetable products — Determination of copper content — Photometric method,Produits dérivés des fruits et légumes — Dosage du cuivre — Méthode photo
• ISO 3095:19758235,IS,,ISO 3095:1975,Acoustics — Measurement of noise emitted by railbound vehicles,Acoustique — Mesurage du bruit émis par les véhicules circulant sur rails,1975-09-01,1,"['17.1
• ISO 3095:200541669,IS,,ISO 3095:2005,Railway applications — Acoustics — Measurement of noise emitted by railbound vehicles,Applications ferroviaires — Acoustique — Mesurage du bruit émis par le
• ISO 3095:201355726,IS,,ISO 3095:2013,Acoustics — Railway applications — Measurement of noise emitted by railbound vehicles,Acoustique — Applications ferroviaires — Mesurage du bruit émis par l
• ISO 3096:19748236,IS,,ISO 3096:1974,Needle roller bearings — Needle rollers — Dimensions — Metric series,Roulements à aiguilles — Aiguilles — Dimensions — Série métrique,1974-04-01,1,['21.100.2
• ISO 3096:199620526,IS,,ISO 3096:1996,Rolling bearings — Needle rollers — Dimensions and tolerances,Roulements — Aiguilles — Dimensions et tolérances,1996-12-19,2,['21.100.20'],ISO/TC 4/SC 5,959
• ISO 3096:1996/Cor 1:199932435,IS,Cor,ISO 3096:1996/Cor 1:1999,Rolling bearings — Needle rollers — Dimensions and tolerances — Technical Corrigendum 1,Roulements — Aiguilles — Dimensions et tolérances — Re
• ISO 3098-0:199724792,IS,,ISO 3098-0:1997,Technical product documentation — Lettering — Part 0: General requirements,Documentation technique de produits — Écriture — Partie 0: Prescriptions généra
• ISO 3098-1:19748238,IS,,ISO 3098-1:1974,Technical drawings — Lettering — Part 1: Currently used characters,Dessins techniques — Écriture — Partie 1: Caractères courants,1974-04-01,1,['01.100.01']
• ISO 3098-2:19848240,IS,,ISO 3098-2:1984,Technical drawings — Lettering — Part 2: Greek characters,Dessins techniques — Écriture — Partie 2: Caractères grecs,1984-05-01,1,['01.100.01'],ISO/TC 10/S
• ISO 3098-3:19878241,IS,,ISO 3098-3:1987,Technical drawings — Lettering — Part 3: Diacritical and particular marks for the Latin alphabet,Dessins techniques — Écriture — Partie 3: Signes diacritiq
• ISO 3098-4:19848242,IS,,ISO 3098-4:1984,Technical drawings — Lettering — Part 4: Cyrillic characters,Dessins techniques — Écriture — Partie 4: Caractères cyrilliques,1984-05-01,1,['01.100.01'],IS
• ISO 3100-1:19758244,IS,,ISO 3100-1:1975,Meat and meat products — Sampling — Part 1: Taking primary samples,Viandes et produits à base de viande — Échantillonnage — Partie 1: Prélèvements élémenta
• ISO 3100-1:19918245,IS,,ISO 3100-1:1991,Meat and meat products — Sampling and preparation of test samples — Part 1: Sampling,Viandes et produits à base de viande — Échantillonnage et préparation
• ISO 3100-2:19888246,IS,,ISO 3100-2:1988,Meat and meat products — Sampling and preparation of test samples — Part 2: Preparation of test samples for microbiological examination,Viandes et produits
• ISO 3101:19818248,IS,,ISO 3101:1981,Wheels and castors — Triangular top plates with three fixing holes,Roues et roulettes de manutention — Platines triangulaires à trois trous de fixation,1981-
• ISO 3102:19818249,IS,,ISO 3102:1981,Wheels and castors for non-powered equipment — Off-set for swivel castors,Roues et roulettes de manutention pour engins de manutention non automoteurs — Dépo
• ISO 3103:19808250,IS,,ISO 3103:1980,Tea — Preparation of liquor for use in sensory tests,Thé — Préparation d'une infusion en vue d'examens organoleptiques,1980-04-01,1,"['67.240','67.140.10']",
• ISO 3104:19768251,IS,,ISO 3104:1976,Petroleum products — Transparent and opaque liquids — Determination of kinematic viscosity and calculation of dynamic viscosity,Produits pétroliers — Liquide
• ISO 3104:19948252,IS,,ISO 3104:1994,Petroleum products — Transparent and opaque liquids — Determination of kinematic viscosity and calculation of dynamic viscosity,Produits pétroliers — Liquide
• ISO 3104:1994/Cor 1:199729014,IS,Cor,ISO 3104:1994/Cor 1:1997,Petroleum products — Transparent and opaque liquids — Determination of kinematic viscosity and calculation of dynamic viscosity — Technical Co
• ISO 3104:202067965,IS,,ISO 3104:2020,Petroleum products — Transparent and opaque liquids — Determination of kinematic viscosity and calculation of dynamic viscosity,Produits pétroliers — Liquid
• ISO 3105:19768253,IS,,ISO 3105:1976,Glass capillary kinematic viscometers — Specification and operating instructions,"Viscosimètres à capillaire, en verre, pour viscosité cinématique — Spécific
• ISO 3106:19748255,IS,,ISO 3106:1974,Dental zinc oxide/eugenol filling materials,Produits d'obturation dentaire à base d'oxyde de zinc-eugénol,1974-10-01,1,['11.060.10'],ISO/TC 106/SC 1,9599,,[8
• ISO 3107:19748256,IS,,ISO 3107:1974,Dental zinc oxide/eugenol cementing materials,Ciments dentaires à base d'oxyde de zinc-eugénol,1974-10-01,1,['11.060.10'],ISO/TC 106/SC 1,9599,,[8257],"['en'
• ISO 3107:19888257,IS,,ISO 3107:1988,Dental zinc oxide/eugenol cements and zinc oxide non-eugenol cements,Ciments dentaires à base d'oxyde de zinc-eugénol et ciments dentaires à base d'oxyde de
• ISO 3107:200436494,IS,,ISO 3107:2004,Dentistry — Zinc oxide/eugenol and zinc oxide/non-eugenol cements,Art dentaire — Ciments dentaires à base d'oxyde de zinc-eugénol et à base d'oxyde de zinc
• ISO 3107:2004/Cor 1:200643988,IS,Cor,ISO 3107:2004/Cor 1:2006,Dentistry — Zinc oxide/eugenol and zinc oxide/non-eugenol cements — Technical Corrigendum 1,Art dentaire — Ciments dentaires à base d'oxyde de
• ISO 3107:201145800,IS,,ISO 3107:2011,Dentistry — Zinc oxide/eugenol cements and zinc oxide/non-eugenol cements,Médecine bucco-dentaire — Ciments dentaires à base d'oxyde de zinc-eugénol et à ba
• ISO 3108:19748258,IS,,ISO 3108:1974,Steel wire ropes for general purposes — Determination of actual breaking load,Câbles en acier pour usages courants — Détermination de la charge de rupture ef
• ISO 3109:19748259,IS,,ISO 3109:1974,Assembly tools for screws and nuts — Hexagon insert bits for hexagon socket head screws,"Outils de manoeuvre pour vis et écrous — Embouts six pans mâles, à h
• ISO 3109:19848260,IS,,ISO 3109:1984,Assembly tools for screws and nuts — Hexagon insert bits for hexagon socket head screws,"Outils de manoeuvre pour vis et écrous — Embouts six pans mâles, à h
• ISO 3115:19818272,IS,,ISO 3115:1981,Castings in magnesium alloys containing zirconium — Chemical composition and mechanical properties,Pièces moulées en alliages de magnésium contenant du zirco
• ISO 3116:19818273,IS,,ISO 3116:1981,Wrought magnesium alloys — Chemical composition and mechanical properties,Alliages de magnésium corroyés — Composition chimique et caractéristiques mécanique
• ISO 3116:200128574,IS,,ISO 3116:2001,Magnesium and magnesium alloys — Wrought magnesium alloys,Magnésium et alliages de magnésium — Alliages de magnésium corroyés,2001-04-05,3,['77.120.20'],ISO
• ISO 3116:200745467,IS,,ISO 3116:2007,Magnesium and magnesium alloys — Wrought magnesium alloys,Magnésium et alliages de magnésium — Alliages de magnésium corroyés,2007-04-16,4,['77.120.20'],ISO
• ISO 3126:19748283,IS,,ISO 3126:1974,Plastics pipes — Measurement of dimensions,Tubes en matières plastiques — Mesurage des dimensions,1974-08-01,1,['23.040.20'],ISO/TC 138/SC 5,9599,,[32202],"[
• ISO 3127:19808284,IS,,ISO 3127:1980,Unplasticized polyvinyl chloride (PVC) pipes for the transport of fluids — Determination and specification of resistance to external blows,Tubes en polychlor
• ISO 3129:19758287,IS,,ISO 3129:1975,Wood — Sampling methods and general requirements for physical and mechanical tests,Bois — Méthodes d'échantillonnage et conditions générales pour les essais
• ISO 3129:201252489,IS,,ISO 3129:2012,Wood — Sampling methods and general requirements for physical and mechanical testing of small clear wood specimens,Bois — Méthodes d'échantillonnage et cond
• ISO 3130:19758288,IS,,ISO 3130:1975,Wood — Determination of moisture content for physical and mechanical tests,Bois — Détermination de l'humidité en vue des essais physiques et mécaniques,1975-
• ISO 3131:19758289,IS,,ISO 3131:1975,Wood — Determination of density for physical and mechanical tests,Bois — Détermination de la masse volumique en vue des essais physiques et mécaniques,1975-1
• ISO 3132:19758290,IS,,ISO 3132:1975,Wood — Testing in compression perpendicular to grain,Bois — Essai de compression perpendiculaire aux fibres,1975-11-01,1,['79.040'],ISO/TC 218,9599,,"[74335,
• ISO 3133:19758291,IS,,ISO 3133:1975,Wood — Determination of ultimate strength in static bending,Bois — Détermination de la résistance à la flexion statique,1975-11-01,1,['79.040'],ISO/TC 218,95
• ISO 3134-1:19858293,IS,,ISO 3134-1:1985,Light metals and their alloys — Terms and definitions — Part 1: Materials,Métaux légers et leurs alliages — Termes et définitions — Partie 1: Matériaux,198
• ISO 3134-2:19858295,IS,,ISO 3134-2:1985,Light metals and their alloys — Terms and definitions — Part 2: Unwrought products,Métaux légers et leurs alliages — Termes et définitions — Partie 2: Form
• ISO 3134-3:19858297,IS,,ISO 3134-3:1985,Light metals and their alloys — Terms and definitions — Part 3: Wrought products,Métaux légers et leurs alliages — Termes et définitions — Partie 3: Produi
• ISO 3134-4:19858299,IS,,ISO 3134-4:1985,Light metals and their alloys — Terms and definitions — Part 4: Castings,Métaux légers et leurs alliages — Termes et définitions — Partie 4: Produits moulé
• ISO 3134-5:19818300,IS,,ISO 3134-5:1981,Light metals and their alloys — Terms and definitions — Part 5: Methods of processing and treatment,Métaux légers et leurs alliages — Termes de référence e
• ISO 3136:19838301,IS,,ISO 3136:1983,Rubber latex — Styrene-butadiene — Determination of bound styrene content,Latex de caoutchoucs — Styrène-butadiène — Détermination de la teneur en styrène li
• ISO 3140:19768306,IS,,ISO 3140:1976,"Oil of sweet orange, obtained by expression","Huile essentielle d'orange douce, obtenue par expression",1976-12-01,1,['71.100.60'],ISO/TC 54,9599,,[8307],['
• ISO 3140:19908307,IS,,ISO 3140:1990,"Oil of sweet orange (Citrus sinensis (Linnaeus) Obsbeck), obtained by mechanical treatment",Huile essentielle d'orange douce (Citrus sinensis (Linnaeus) Obs
• ISO 3140:200537542,IS,,ISO 3140:2005,"Oil of sweet orange (Citrus sinensis (L.) Osbeck), obtained by mechanical treatment",Huile essentielle d'orange douce (Citrus sinensis (L.) Osbeck) obtenue
• ISO 3140:201146430,IS,,ISO 3140:2011,"Oil of sweet orange [Citrus sinensis (L.) Osbeck], obtained by physical extraction of the peel",Huile essentielle d'orange douce [Citrus sinensis (L.) Osbe
• ISO 3141:19758308,IS,,ISO 3141:1975,Oil of clove leaf,Huile essentielle de feuilles de giroflier,1975-03-01,1,['71.100.60'],ISO/TC 54,9599,,"[8309,8310]",['en'],1
• ISO 3141:19868309,IS,,ISO 3141:1986,Oil of clove leaf (Syzygium aromaticum (Linnaeus) Merrill et Perry syn. Eugenia caryophyllus (C. Sprengel) Bullock et Harrison),Huile essentielle de feuilles
• ISO 3142:19748311,IS,,ISO 3142:1974,Oil of clove bud,Huile essentielle de clous de giroflier,1974-08-01,1,['71.100.60'],ISO/TC 54,9599,,[8312],"['en','fr']",2
• ISO 3143:19758313,IS,,ISO 3143:1975,Oil of clove stem,Huile essentielle de griffes de giroflier,1975-03-01,1,['71.100.60'],ISO/TC 54,9599,,[8314],"['en','fr']",1
• ISO 3145:19748316,IS,,ISO 3145:1974,Rolling bearings — Bearings with spherical outside surface and extended inner ring width — Eccentric locking collars,Roulements — Roulements à surface extéri
• ISO 3146:19748317,IS,,ISO 3146:1974,Plastics — Determination of melting temperature of semi-crystalline polymers — Optical method,Matières plastiques — Détermination de la température de fusion
• ISO 3146:19858318,IS,,ISO 3146:1985,Plastics — Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers,Plastiques — Détermination du comportement
• ISO 3146:20008319,IS,,ISO 3146:2000,Plastics — Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope
• ISO 3146:2000/Cor 1:200237642,IS,Cor,ISO 3146:2000/Cor 1:2002,Plastics — Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polari
• ISO 3154:19768325,IS,,ISO 3154:1976,Stranded wire ropes for mine hoisting — Technical delivery requirements,Câbles d'extraction toronnés utilisés dans les mines — Conditions techniques de récep
• ISO 3157:19758329,IS,,ISO 3157:1975,Radioluminescence for time measurement instruments — Specifications,Radioluminescence pour les instruments horaires — Spécifications,1975-05-01,1,['39.040.01
• ISO 3159:19768332,IS,,ISO 3159:1976,Timekeeping instruments — Wrist-chronometers with spring balance oscillator,Instruments horaires — Chronomètres-bracelet à oscillateur balancier-spiral,1976-
• ISO 3160-1:19828334,IS,,ISO 3160-1:1982,Watch cases and accessories — Gold alloy coverings — Part 1: General requirements,Boîtes de montres et leurs accessoires — Revêtements d'alliage d'or — Par
• ISO 3160-1:19958335,IS,,ISO 3160-1:1995,Watch cases and accessories — Gold alloy coverings — Part 1: General requirements,Boîtes de montres et leurs accessoires — Revêtements d'alliage d'or — Par
• ISO 3160-2:19828336,IS,,ISO 3160-2:1982,"Watch cases and accessories — Gold alloy coverings — Part 2: Determination of fineness, thickness and corrosion resistance","Boîtes de montres et leurs ac
• ISO 3160-2:19928337,IS,,ISO 3160-2:1992,"Watch cases and accessories — Gold alloy coverings — Part 2: Determination of fineness, thickness, corrosion resistance and adhesion","Boîtes de montres e
• ISO 3160-2:200331209,IS,,ISO 3160-2:2003,"Watch-cases and accessories — Gold alloy coverings — Part 2: Determination of fineness, thickness, corrosion resistance and adhesion","Boîtes de montres
• ISO 3160-3:19938338,IS,,ISO 3160-3:1993,Watch cases and accessories — Gold alloy coverings — Part 3: Abrasion resistance tests of a type of coating on standard gauges,Boîtes de montres et leurs a
• ISO 3160:19758333,IS,,ISO 3160:1975,Withdrawal of ISO 3160-1975,Annulation de l'ISO 3160-1975,1975-04-01,1,['39.040.10'],ISO/TC 114/SC 6,9599,,[8334],['en'],2
• ISO 3161:19778339,IS,,ISO 3161:1977,"UNJ threads, with controlled root radius, for aerospace — Inch series","Filetages UNJ, avec rayon à fond de filet contrôlé, pour applications aérospatiales
• ISO 3161:19968340,IS,,ISO 3161:1996,"Aerospace — UNJ threads, with controlled root radius, for aerospace — Inch series","Aéronautique et espace — Filetage UNJ, avec rayon à fond de filet contrô
• ISO 3164:19798343,IS,,ISO 3164:1979,Earth-moving machinery — Laboratory evaluations of roll-over and falling-object protective structures — Specifications for the deflection-limiting volume,Eng
• ISO 3164:1979/Amd 1:19808345,IS,Amd,ISO 3164:1979/Amd 1:1980,Earth-moving machinery — Laboratory evaluations of roll-over and falling-object protective structures — Specifications for the deflection-limit
• ISO 3164:19928344,IS,,ISO 3164:1992,Earth-moving machinery — Laboratory evaluations of roll-over and falling-object protective structures — Specifications for deflection-limiting volume,Engins
• ISO 3164:199522182,IS,,ISO 3164:1995,Earth-moving machinery — Laboratory evaluations of protective structures — Specifications for deflection-limiting volume,Engins de terrassement — Étude en l
• ISO 3166-1:199724591,IS,,ISO 3166-1:1997,Codes for the representation of names of countries and their subdivisions — Part 1: Country codes,Codes pour la représentation des noms de pays et de leur
• ISO 3166-1:200639719,IS,,ISO 3166-1:2006,Codes for the representation of names of countries and their subdivisions — Part 1: Country codes,Codes pour la représentation des noms de pays et de leur
• ISO 3166-1:2006/Cor 1:200746123,IS,Cor,ISO 3166-1:2006/Cor 1:2007,Codes for the representation of names of countries and their subdivisions — Part 1: Country codes — Technical Corrigendum 1,Codes pour la re
• ISO 3166-1:201363545,IS,,ISO 3166-1:2013,Codes for the representation of names of countries and their subdivisions — Part 1: Country codes,Codes pour la représentation des noms de pays et de leur
• ISO 3166-2:19988349,IS,,ISO 3166-2:1998,Codes for the representation of names of countries and their subdivisions — Part 2: Country subdivision code,Codes pour la représentation des noms de pays
• ISO 3166-2:200739718,IS,,ISO 3166-2:2007,Codes for the representation of names of countries and their subdivisions — Part 2: Country subdivision code,Codes pour la représentation des noms de pays
• ISO 3166-2:201363546,IS,,ISO 3166-2:2013,Codes for the representation of names of countries and their subdivisions — Part 2: Country subdivision code,Codes pour la représentation des noms de pays
• ISO 3166-3:19992130,IS,,ISO 3166-3:1999,Codes for the representation of names of countries and their subdivisions — Part 3: Code for formerly used names of countries,Codes pour la représentation
• ISO 3166-3:201363547,IS,,ISO 3166-3:2013,Codes for the representation of names of countries and their subdivisions — Part 3: Code for formerly used names of countries,Codes pour la représentation
• ISO 3166:19818347,IS,,ISO 3166:1981,Codes for the representation of names of countries,Codes pour la représentation des noms de pays,1981-05-01,2,['01.140.30'],ISO/TC 46,9599,,[8348],"['en','fr
• ISO 3166:19888348,IS,,ISO 3166:1988,Codes for the representation of names of countries,Codes pour la représentation des noms de pays,1988-08-18,3,['01.140.30'],ISO/TC 46,9599,[8347],[22748],"['
• ISO 3166:199322748,IS,,ISO 3166:1993,Codes for the representation of names of countries,Codes pour la représentation des noms de pays,1993-12-23,4,['01.140.30'],ISO/TC 46,9599,[8348],[24591],"[
• ISO 3167:19838350,IS,,ISO 3167:1983,Plastics — Preparation and use of multipurpose test specimens,Plastiques — Préparation et utilisation d'éprouvettes à usages multiples,1983-11-01,2,['83.080.
• ISO 3167:19938351,IS,,ISO 3167:1993,Plastics — Multipurpose test specimens,Plastiques — Éprouvettes à usages multiples,1993-06-10,3,['83.080.01'],ISO/TC 61/SC 2,9599,[8350],[31272],"['en','fr']
• ISO 3167:200231272,IS,,ISO 3167:2002,Plastics — Multipurpose test specimens,Plastiques — Éprouvettes à usages multiples,2002-03-07,4,['83.080.01'],ISO/TC 61/SC 2,9599,[8351],[65105],"['en','fr'
• ISO 3168:19868352,IS,,ISO 3168:1986,"Aerospace — Self-locking, fixed, single-lug anchor nuts with counterbore, classification 1 100 MPa/235 degrees C","Aéronautique et espace — Écrous à river,
• ISO 3170:19758354,IS,,ISO 3170:1975,Petroleum products — Liquid hydrocarbons — Manual sampling,Produits pétroliers — Hydrocarbures liquides — Échantillonnage manuel,1975-07-01,1,['75.080'],ISO/
• ISO 3170:19888355,IS,,ISO 3170:1988,Petroleum liquids — Manual sampling,Produits pétroliers liquides — Échantillonnage manuel,1988-09-01,2,['75.080'],ISO/TC 28/SC 2,9599,[8354],[29283],"['en','
• ISO 3170:1988/Amd 1:199825878,IS,Amd,ISO 3170:1988/Amd 1:1998,Petroleum liquids — Manual sampling — Amendment 1,Produits pétroliers liquides — Échantillonnage manuel — Amendement 1,1998-02-05,2,['75.080']
• ISO 3170:200429283,IS,,ISO 3170:2004,Petroleum liquids — Manual sampling,Produits pétroliers liquides — Échantillonnage manuel,2004-01-19,3,['75.080'],ISO/TC 28/SC 2,9599,"[25878,8355]","[80521
• ISO 3171:19758356,IS,,ISO 3171:1975,Petroleum products — Liquid hydrocarbons — Automatic pipeline sampling,Produits pétroliers — Hydrocarbures liquides — Échantillonnage automatique en oléoduc,
• ISO 3173:19748359,IS,,ISO 3173:1974,Road vehicles — Apparatus for measurement of the opacity of exhaust gas from diesel engines operating under steady state conditions,Véhicules routiers — Disp
• ISO 3174:19818360,IS,,ISO 3174:1981,Aircraft — Connections for checking hydraulic systems by ground appliances,Aéronefs — Raccords pour la vérification des circuits hydrauliques par des apparei
• ISO 3175-1:199826819,IS,,ISO 3175-1:1998,"Textiles — Professional care, drycleaning and wetcleaning of fabrics and garments — Part 1: Assessment of performance after cleaning and finishing","Text
• ISO 3175-1:1998/Cor 1:200236730,IS,Cor,ISO 3175-1:1998/Cor 1:2002,"Textiles — Professional care, drycleaning and wetcleaning of fabrics and garments — Part 1: Assessment of performance after cleaning and fi
• ISO 3175-1:201054875,IS,,ISO 3175-1:2010,"Textiles — Professional care, drycleaning and wetcleaning of fabrics and garments — Part 1: Assessment of performance after cleaning and finishing","Text
• ISO 3175-2:199826820,IS,,ISO 3175-2:1998,"Textiles — Professional care, drycleaning and wetcleaning of fabrics and garments — Part 2: Procedure for testing performance when cleaning and finishing
• ISO 3175-2:1998/Cor 1:200236731,IS,Cor,ISO 3175-2:1998/Cor 1:2002,"Textiles — Professional care, drycleaning and wetcleaning of fabrics and garments — Part 2: Procedure for testing performance when cleaning
• ISO 3175-2:201054876,IS,,ISO 3175-2:2010,"Textiles — Professional care, drycleaning and wetcleaning of fabrics and garments — Part 2: Procedure for testing performance when cleaning and finishing
• ISO 3175-3:200328997,IS,,ISO 3175-3:2003,"Textiles — Professional care, drycleaning and wetcleaning of fabrics and garments — Part 3: Procedure for testing performance when cleaning and finishing
• ISO 3175-3:2003/Cor 1:200954873,IS,Cor,ISO 3175-3:2003/Cor 1:2009,"Textiles — Professional care, drycleaning and wetcleaning of fabrics and garments — Part 3: Procedure for testing performance when cleaning
• ISO 3175-4:200328998,IS,,ISO 3175-4:2003,"Textiles — Professional care, drycleaning and wetcleaning of fabrics and garments — Part 4: Procedure for testing performance when cleaning and finishing
• ISO 3175-4:2003/Cor 1:200954874,IS,Cor,ISO 3175-4:2003/Cor 1:2009,"Textiles — Professional care, drycleaning and wetcleaning of fabrics and garments — Part 4: Procedure for testing performance when cleaning
• ISO 3175:19798362,IS,,ISO 3175:1979,Textiles — Determination of dimensional change on dry cleaning in perchlorethylene — Machine method,Textiles — Détermination de la variation des dimensions a
• ISO 3175:19952003,IS,,ISO 3175:1995,Textiles — Evaluation of stability to machine dry-cleaning,Textiles — Evaluation de la stabilité au nettoyage à sec en machine,1995-08-10,3,['59.080.01'],ISO
• ISO 3177:19758365,IS,,ISO 3177:1975,Potassium hydroxide for industrial use — Determination of chlorides content — Photometric method,Hydroxyde de potassium à usage industriel — Dosage des chlor
• ISO 3178:19748366,IS,,ISO 3178:1974,Steel wire ropes for general purposes — Terms of acceptance,Câbles en acier d'usages courants — Conditions de réception,1974-12-01,1,['77.140.65'],ISO/TC 105
• ISO 3179:19748368,IS,,ISO 3179:1974,Coniferous sawn timber — Nominal dimensions,Sciages de bois résineux — Dimensions nominales,1974-11-01,1,['79.040'],ISO/TC 218,9599,,[80059],"['en','fr']",2
• ISO 3183-1:19968370,IS,,ISO 3183-1:1996,Petroleum and natural gas industries — Steel pipe for pipelines — Technical delivery conditions — Part 1: Pipes of requirement class A,Industries du pétrol
• ISO 3183-2:19968371,IS,,ISO 3183-2:1996,Petroleum and natural gas industries — Steel pipe for pipelines — Technical delivery conditions — Part 2: Pipes of requirements class B,Industries du pétro
• ISO 3183-3:19998372,IS,,ISO 3183-3:1999,Petroleum and natural gas industries — Steel pipe for pipelines — Technical delivery conditions — Part 3: Pipes of requirement class C,Industries du pétrol
• ISO 3183-3:1999/Cor 1:200033881,IS,Cor,ISO 3183-3:1999/Cor 1:2000,Petroleum and natural gas industries — Steel pipe for pipelines — Technical delivery conditions — Part 3: Pipes of requirement class C — Tec
• ISO 3183:19808369,IS,,ISO 3183:1980,Oil and natural gas industries — Steel line pipe,Industrie du pétrole et du gaz naturel — Tubes en acier pour conduites,1980-09-01,1,"['77.140.75','75.200']"
• ISO 3183:200739071,IS,,ISO 3183:2007,Petroleum and natural gas industries — Steel pipe for pipeline transportation systems,Industries du pétrole et du gaz naturel — Tubes en acier pour les syst
• ISO 3183:201256843,IS,,ISO 3183:2012,Petroleum and natural gas industries — Steel pipe for pipeline transportation systems,Industries du pétrole et du gaz naturel — Tubes en acier pour les syst
• ISO 3183:2012/Amd 1:201772122,IS,Amd,ISO 3183:2012/Amd 1:2017,Petroleum and natural gas industries — Steel pipe for pipeline transportation systems — Amendment 1,Industries du pétrole et du gaz naturel —
• ISO 3184:19748374,IS,,ISO 3184:1974,Reach and straddle fork lift trucks — Stability tests,Chariots à mât ou fourche rétractable et chariots à fourche entre longerons — Essais de stabilité,1974-
• ISO 3184:19988375,IS,,ISO 3184:1998,Reach and straddle fork-lift trucks — Stability tests,Chariots à mât ou à fourche rétractable et chariots à fourche entre longerons — Essais de stabilité,199
• ISO 3184:1998/Cor 1:200033238,IS,Cor,ISO 3184:1998/Cor 1:2000,Reach and straddle fork-lift trucks — Stability tests — Technical Corrigendum 1,Chariots à mât ou à fourche rétractable et chariots à fourche
• ISO 3185:19938376,IS,,ISO 3185:1993,"Aerospace — Bolts, normal bihexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less th
• ISO 3185:200841823,IS,,ISO 3185:2008,"Aerospace — Bolts, normal bihexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less t
• ISO 3186:19948377,IS,,ISO 3186:1994,"Aerospace — Bolts, large bihexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes 1 250 MP
• ISO 3191:19858385,IS,,ISO 3191:1985,"Aerospace — Self-locking, fixed, single-lug anchor nuts, reduced series, with counterbore, strength classification 1 100 MPa and maximum operating temperatu
• ISO 3193:19918388,IS,,ISO 3193:1991,"Aerospace — Bolts, normal hexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than
• ISO 3193:1991/Cor 1:19928389,IS,Cor,ISO 3193:1991/Cor 1:1992,"Aerospace — Bolts, normal hexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength cla
• ISO 3194:19758390,IS,,ISO 3194:1975,Potassium hydroxide for industrial use — Determination of sulphur compounds — Method by reduction and titrimetry,Hydroxyde de potassium à usage industriel —
• ISO 3198:19758395,IS,,ISO 3198:1975,Sodium hydroxide for industrial use — Determination of sulphur compounds — Method by reduction and titrimetry,Hydroxyde de sodium à usage industriel — Dosage
• ISO 3201:19758399,IS,,ISO 3201:1975,"Sodium and potassium silicates for industrial use — Determination of iron content — 1,10- Phenanthroline photometric method","Silicates de sodium et de pota
• ISO 3202:19918401,IS,,ISO 3202:1991,"Aerospace — Screws, pan head, internal offset cruciform ribbed drive, threaded to head, MJ threads, metallic material, coated or uncoated, strength classes
• ISO 3207:19758406,IS,,ISO 3207:1975,Statistical interpretation of data — Determination of a statistical tolerance interval,Interprétation statistique des données — Détermination d'un intervalle
• ISO 3209:19898409,IS,,ISO 3209:1989,"Aerospace — Nuts, anchor, self-locking, floating, two-lug, with counterbore, with MJ threads, coated or uncoated, classification 1 100 MPa/235 degrees C, 1
• ISO 3209:199827432,IS,,ISO 3209:1998,"Aerospace — Nuts, anchor, self-locking, floating, two lug, with counterbore, with MJ threads, classifications: 1 100 MPa (at ambient temperature )/235 degr
• ISO 3210:19838410,IS,,ISO 3210:1983,Anodizing of aluminium and its alloys — Assessment of quality of sealed anodic oxide coatings by measurement of the loss of mass after immersion in phosphori
• ISO 3210:201051489,IS,,ISO 3210:2010,Anodizing of aluminium and its alloys — Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phos
• ISO 3210:201767983,IS,,ISO 3210:2017,Anodizing of aluminium and its alloys — Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in acid
• ISO 3211:19778411,IS,,ISO 3211:1977,Anodizing of aluminium and its alloys — Assessment of resistance of anodic oxide coatings to cracking by deformation,Anodisation de l'aluminium et de ses all
• ISO 3211:201051491,IS,,ISO 3211:2010,Anodizing of aluminium and its alloys — Assessment of resistance of anodic oxidation coatings to cracking by deformation,Anodisation de l'aluminium et de se
• ISO 3212:19758412,IS,,ISO 3212:1975,Polypropylene pipes — Burst test requirements,Tubes en polypropylène — Spécifications pour les essais de résistance à l'écartement,1975-09-01,1,['23.040.20']
• ISO 3213:19758414,IS,,ISO 3213:1975,Polypropylene pipes — Reduction of permissible stress as a function of time and temperature,Tubes en polypropylène — Dégressivité des tensions de charge en f
• ISO 3213:199622752,IS,,ISO 3213:1996,Polypropylene (PP) pipes — Effect of time and temperature on expected strength,Tubes en polypropylène (PP) — Influence du temps et de la température sur la
• ISO 3214:19748415,IS,,ISO 3214:1974,Oil of Litsea cubeba,Huile essentielle de Litsea cubeba,1974-08-01,1,['71.100.60'],ISO/TC 54,9599,,"[33747,8416]","['en','fr']",2
• ISO 3215:19748417,IS,,ISO 3215:1974,Oils of nutmeg,Huiles essentielles de noix muscade,1974-08-01,1,['71.100.60'],ISO/TC 54,9599,,[8418],"['en','fr']",1
• ISO 3216:19748419,IS,,ISO 3216:1974,Oil of cassia,Huile essentielle de cannelle de Chine,1974-08-01,1,['71.100.60'],ISO/TC 54,9599,,[8420],"['en','fr']",2
• ISO 3218:19768423,IS,,ISO 3218:1976,Essential oils — Principles of nomenclature,Huiles essentielles — Principes de nomenclature,1976-06-01,1,['71.100.60'],ISO/TC 54,9599,,"[56820,8424]","['en',
• ISO 3219:19778425,IS,,ISO 3219:1977,"Plastics — Polymers in the liquid, emulsified or dispersed state — Determination of viscosity with a rotational viscometer working at defined shear rate",Pl
• ISO 3219:19938426,IS,,ISO 3219:1993,Plastics — Polymers/resins in the liquid state or as emulsions or dispersions — Determination of viscosity using a rotational viscometer with defined shear r
• ISO 3221:19898429,IS,,ISO 3221:1989,"Aerospace — Nuts, anchor, self-locking, fixed, 90 degrees corner, with counterbore, with MJ threads, coated or uncoated, classification 1 100 MPa/235 degree
• ISO 3222:19898430,IS,,ISO 3222:1989,"Aerospace — Nuts, anchor, self-locking, fixed, closed corner, reduced series, with counterbore, with MJ threads, coated or uncoated, classification 1 100 MP
• ISO 3223:19898431,IS,,ISO 3223:1989,"Aerospace — Nuts, anchor, self-locking, fixed, two-lug, with counterbore, with MJ threads, coated or uncoated, classification 1 100 MPa/ 235 degrees C, 1 10
• ISO 3224:19858432,IS,,ISO 3224:1985,"Aerospace — Self-locking, floating, single-lug anchor nuts, with counterbore, classification 1 100 MPa/235 degrees C","Aéronautique et espace — Écrous à riv
• ISO 3225:19858433,IS,,ISO 3225:1985,"Aerospace — Self-locking, fixed, two lug anchor nuts, reduced series, with counterbore, strength classification 1 100 MPa and maximum operating temperature
• ISO 3228:19778436,IS,,ISO 3228:1977,Rolling bearings — Bearings with spherical outside surface and extended inner ring width — Cast and pressed housings,Roulements — Roulements à surface extéri
• ISO 3228:19938437,IS,,ISO 3228:1993,Rolling bearings — Cast and pressed housings for insert bearings,Roulements — Logements moulés et emboutis pour roulements 'insert',1993-08-26,3,['21.100.20'
• ISO 3231:19748440,IS,,ISO 3231:1974,Paints and varnishes — Determination of resistance to humid atmospheres containing sulphur dioxide,Peintures et vernis — Détermination de la résistance aux a
• ISO 3231:19938441,IS,,ISO 3231:1993,Paints and varnishes — Determination of resistance to humid atmospheres containing sulfur dioxide,Peintures et vernis — Détermination de la résistance aux at
• ISO 3233-1:201351937,IS,,ISO 3233-1:2013,Paints and varnishes — Determination of the percentage volume of non-volatile matter — Part 1: Method using a coated test panel to determine non-volatile
• ISO 3233-2:201455331,IS,,ISO 3233-2:2014,Paints and varnishes — Determination of the percentage volume of non-volatile matter — Part 2: Method using the determination of non-volatile-matter conte
• ISO 3233:19848443,IS,,ISO 3233:1984,Paints and varnishes — Determination of volume of dry coating (non-volatile matter) obtained from a given volume of liquid coating,Peintures et vernis — Déte
• ISO 3233:199820351,IS,,ISO 3233:1998,Paints and varnishes — Determination of percentage volume of non-volatile matter by measuring the density of a dried coating,Peintures et vernis — Détermina
• ISO 3233:1998/Cor 1:199932384,IS,Cor,ISO 3233:1998/Cor 1:1999,Paints and varnishes — Determination of percentage volume of non-volatile matter by measuring the density of a dried coating — Technical Corri
• ISO 3238:19758449,IS,,ISO 3238:1975,Sodium sulphate for industrial use — Determination of calcium content — EDTA complexometric method,Sulfate de sodium à usage industriel — Dosage du calcium —
• ISO 3239:19758451,IS,,ISO 3239:1975,"Sodium sulphate for industrial use — Determination of iron content — 1,10- Phenanthroline photometric method","Sulfate de sodium à usage industriel — Dosage
• ISO 3243:19758455,IS,,ISO 3243:1975,Keyboards for countries whose languages have alphabetic extenders — Guidelines for harmonization,Claviers pour les pays dont la langue utilise des caractères
• ISO 3244:19748456,IS,,ISO 3244:1974,Office machines and data processing equipment — Principles governing the positioning of control keys on keyboards,Machines de bureau et machines employées en
• ISO 3244:19848457,IS,,ISO 3244:1984,Office machines and data processing equipment — Principles governing the positioning of control keys on keyboards,Machines de bureau et machines employées en
• ISO 3245:19748458,IS,,ISO 3245:1974,"Rolling bearings — Needle roller bearings, drawn cup, without inner ring — Metric series — Boundary dimensions and tolerances",Roulements à aiguilles — Doui
• ISO 3245:199720525,IS,,ISO 3245:1997,"Rolling bearings — Needle roller bearings, drawn cup without inner rings — Boundary dimensions and tolerances",Roulements — Douilles à aiguilles sans bague
• ISO 3245:200737776,IS,,ISO 3245:2007,"Rolling bearings — Needle roller bearings, drawn cup without inner ring — Boundary dimensions and tolerances",Roulements — Douilles à aiguilles sans bague
• ISO 3245:201561183,IS,,ISO 3245:2015,"Rolling bearings — Needle roller bearings with drawn cup and without inner ring — Boundary dimensions, geometrical product specifications (GPS) and toleran
• ISO 3248:19758461,IS,,ISO 3248:1975,Paints and varnishes — Determination of the effect of heat,Peintures et vernis — Détermination des effets de la chaleur,1975-02-01,1,['87.040'],ISO/TC 35/SC
• ISO 3248:199829496,IS,,ISO 3248:1998,Paints and varnishes — Determination of the effect of heat,Peintures et vernis — Détermination des effets de la chaleur,1998-03-19,2,['87.040'],ISO/TC 35/SC
• ISO 3249:19758462,IS,,ISO 3249:1975,Reciprocating internal combustion engines — Definitions of locations on an engine,Moteurs alternatifs à combustion interne — Définitions des emplacements sur
• ISO 3251:19748463,IS,,ISO 3251:1974,Paint media — Determination of volatile and non-volatile matter,Liants pour peintures — Détermination des matières volatiles et non volatiles,1974-11-01,1,['
• ISO 3251:19938464,IS,,ISO 3251:1993,"Paints and varnishes — Determination of non-volatile matter of paints, varnishes and binders for paints and varnishes","Peintures et vernis — Détermination
• ISO 3251:200330333,IS,,ISO 3251:2003,"Paints, varnishes and plastics — Determination of non-volatile-matter content","Peintures, vernis et plastiques — Détermination de l'extrait sec",2003-02-2
• ISO 3251:200844649,IS,,ISO 3251:2008,"Paints, varnishes and plastics — Determination of non-volatile-matter content","Peintures, vernis et plastiques — Détermination de l'extrait sec",2008-01-3
• ISO 3252:19828465,IS,,ISO 3252:1982,Powder metallurgy — Vocabulary,Métallurgie des poudres — Vocabulaire,1982-05-01,2,"['77.160','01.040.77']",ISO/TC 119,9599,,[2016],"['en','fr']",21
• ISO 3252:19962016,IS,,ISO 3252:1996,Powder metallurgy — Vocabulary,Métallurgie des poudres — Vocabulaire,1996-01-25,3,"['77.160','01.040.77']",ISO/TC 119,9599,[8465],[26045],"['en','fr']",56
• ISO 3252:1996/Cor 1:199627197,IS,Cor,ISO 3252:1996/Cor 1:1996,Powder metallurgy — Vocabulary — Technical Corrigendum 1,Métallurgie des poudres — Vocabulaire — Rectificatif technique 1,1996-10-10,3,"['77.1
• ISO 3252:199926045,IS,,ISO 3252:1999,Powder metallurgy — Vocabulary,Métallurgie des poudres — Vocabulaire,1999-12-16,4,"['01.040.77','77.160']",ISO/TC 119,9599,"[2016,27197]",[69828],"['en','fr
• ISO 3252:201969828,IS,,ISO 3252:2019,Powder metallurgy — Vocabulary,Métallurgie des poudres — Vocabulaire,2019-07-31,5,"['77.160','01.040.77']",ISO/TC 119,9599,[26045],[83128],"['en','fr']",34
• ISO 3253:19758466,IS,,ISO 3253:1975,"Hose connections for equipment for welding, cutting and related processes","Raccords pour tuyaux souples pour appareils de soudage, coupage et techniques co
• ISO 3253:199828604,IS,,ISO 3253:1998,"Gas welding equipment — Hose connections for equipment for welding, cutting and allied processes","Matériel de soudage aux gaz — Raccords pour tuyaux soupl
• ISO 3254:19758467,IS,,ISO 3254:1975,Shipbuilding — Toughened safety glass panes for ships' rectangular windows,Construction navale — Verres de sécurité trempés pour fenêtres rectangulaires de n
• ISO 3254:19898468,IS,,ISO 3254:1989,Shipbuilding and marine structures — Toughened safety glass panes for rectangular windows,Construction navale et structures maritimes — Verres de sécurité tr
• ISO 3257:19828471,IS,,ISO 3257:1982,Rubber compounding ingredients - Carbon black - Test recipe and method of evaluation in styrene- butadiene rubbers,Ingrédients de mélange du caoutchouc — Noi
• ISO 3260:19828474,IS,,ISO 3260:1982,Pulps — Determination of chlorine consumption (Degree of delignification),Pâtes — Détermination de la consommation en chlore (Degré de délignification),1982-
• ISO 3262-1:19978477,IS,,ISO 3262-1:1997,Extenders for paints — Specifications and methods of test — Part 1: Introduction and general test methods,Matières de charge pour peintures — Spécification
• ISO 3262-2:19988478,IS,,ISO 3262-2:1998,Extenders for paints — Specifications and methods of test — Part 2: Barytes (natural barium sulfate),Matières de charge pour peintures — Spécifications et
• ISO 3262-3:19988479,IS,,ISO 3262-3:1998,Extenders for paints — Specifications and methods of test — Part 3: Blanc fixe,Matières de charge pour peintures — Spécifications et méthodes d'essai — Par
• ISO 3262-4:19988480,IS,,ISO 3262-4:1998,Extenders for paints — Specifications and methods of test — Part 4: Whiting,Matières de charge pour peintures — Spécifications et méthodes d'essai — Partie
• ISO 3262-5:199820339,IS,,ISO 3262-5:1998,Extenders for paints — Specifications and methods of test — Part 5: Natural crystalline calcium carbonate,Matières de charge pour peintures — Spécificatio
• ISO 3262-6:199820340,IS,,ISO 3262-6:1998,Extenders for paints — Specifications and methods of test — Part 6: Precipitated calcium carbonate,Matières de charge pour peintures — Spécifications et m
• ISO 3262-7:19988481,IS,,ISO 3262-7:1998,Extenders for paints — Specifications and methods of test — Part 7: Dolomite,Matières de charge pour peintures — Spécifications et méthodes d'essai — Parti
• ISO 3262-8:19998482,IS,,ISO 3262-8:1999,Extenders for paints — Specifications and methods of test — Part 8: Natural clay,Matières de charge pour peintures — Spécifications et méthodes d'essai — P
• ISO 3262-9:19978483,IS,,ISO 3262-9:1997,Extenders for paints — Specifications and methods of test — Part 9: Calcined clay,Matières de charge pour peintures — Spécifications et méthodes d'essai —
• ISO 3262-10:20008484,IS,,ISO 3262-10:2000,Extenders for paints — Specifications and methods of test — Part 10: Natural talc/chlorite in lamellar form,Matières de charge pour peintures — Spécificat
• ISO 3262-11:20008486,IS,,ISO 3262-11:2000,"Extenders for paints — Specifications and methods of test — Part 11: Natural talc, in lamellar form, containing carbonates",Matières de charge pour peint
• ISO 3262-12:200123342,IS,,ISO 3262-12:2001,Extenders for paints — Specifications and methods of test — Part 12: Muscovite-type mica,Matières de charge pour peintures — Spécifications et méthodes d
• ISO 3262-13:199720341,IS,,ISO 3262-13:1997,Extenders for paints — Specifications and methods of test — Part 13: Natural quartz (ground),Matières de charge pour peintures — Spécifications et méthod
• ISO 3262-14:200020342,IS,,ISO 3262-14:2000,Extenders for paints — Specifications and methods of test — Part 14: Cristobalite,Matières de charge pour peintures — Spécifications et méthodes d'essai
• ISO 3262-15:200020343,IS,,ISO 3262-15:2000,Extenders for paints — Specifications and methods of test — Part 15: Vitreous silica,Matières de charge pour peintures — Spécifications et méthodes d'ess
• ISO 3262-16:200032844,IS,,ISO 3262-16:2000,Extenders for paints — Specifications and methods of test — Part 16: Aluminium hydroxides,Matières de charge pour peintures — Spécifications et méthodes
• ISO 3262-17:200032851,IS,,ISO 3262-17:2000,Extenders for paints — Specifications and methods of test — Part 17: Precipitated calcium silicate,Matières de charge pour peintures — Spécifications et
• ISO 3262-18:200032855,IS,,ISO 3262-18:2000,Extenders for paints — Specifications and methods of test — Part 18: Precipitated sodium aluminium silicate,Matières de charge pour peintures — Spécifica
• ISO 3262-19:200032961,IS,,ISO 3262-19:2000,Extenders for paints — Specifications and methods of test — Part 19: Precipitated silica,Matières de charge pour peintures — Spécifications et méthodes d
• ISO 3262-20:200032962,IS,,ISO 3262-20:2000,Extenders for paints — Specifications and methods of test — Part 20: Fumed silica,Matières de charge pour peintures — Spécifications et méthodes d'essai
• ISO 3262-21:200032963,IS,,ISO 3262-21:2000,Extenders for paints — Specifications and methods of test — Part 21: Silica sand (unground natural quartz),Matières de charge pour peintures — Spécificat
• ISO 3262-22:200132956,IS,,ISO 3262-22:2001,Extenders for paints — Specifications and methods of test — Part 22: Flux-calcined kieselguhr,"Matières de charge pour peintures — Spécifications et méth
• ISO 3262:19758476,IS,,ISO 3262:1975,Extenders for paints,Matières de charge pour peintures,1975-09-01,1,['87.060.10'],ISO/TC 256,9599,,"[20342,8480,32851,8481,23342,20343,8482,32844,32961,8483,
• ISO 3263:19748488,IS,,ISO 3263:1974,Withdrawal of ISO 3263-1974,Annulation de l'ISO 3263-1974,1974-11-01,1,['53.040.01'],ISO/TC 101,9599,,[13741],"['en','fr']",1
• ISO 3264:19748489,IS,,ISO 3264:1974,Withdrawal of ISO 3264-1974,Annulation de l'ISO 3264-1974,1974-11-01,1,['53.040.01'],ISO/TC 101,9599,,[13741],"['en','fr']",2
• ISO 3266:19848491,IS,,ISO 3266:1984,Eyebolts for general lifting purposes,Anneaux à tige pour applications de levage général,1984-11-01,1,['53.020.30'],ISO/TC 111/SC 3,9599,,"[36657,26372]","['
• ISO 3267:19758492,IS,,ISO 3267:1975,Road vehicles — Headlamp cleaners,Véhicules routiers — Nettoyeurs de projecteurs,1975-06-01,1,['43.040.20'],ISO/TC 22,9599,,[8493],['en'],2
• ISO 3267:19918493,IS,,ISO 3267:1991,Road vehicles — Headlamp cleaners,Véhicules routiers — Dispositifs de nettoyage des projecteurs,1991-10-10,2,['43.040.20'],ISO/TC 22,9599,[8492],[54019],"['e
• ISO 3268:19788494,IS,,ISO 3268:1978,Plastics — Glass reinforced materials — Determination of tensile properties,Plastiques — Matières renforcées au verre textile — Détermination des caractérist
• ISO 3269:19848495,IS,,ISO 3269:1984,Fasteners — Acceptance inspection,Éléments de fixation — Contrôle de réception,1984-08-01,1,['21.060.01'],ISO/TC 2,9599,,[8496],"['en','fr']",4
• ISO 3269:19888496,IS,,ISO 3269:1988,Fasteners — Acceptance inspection,Éléments de fixation — Contrôle de réception,1988-12-29,2,['21.060.01'],ISO/TC 2,9599,[8495],[22906],"['en','fr']",8
• ISO 3269:200022906,IS,,ISO 3269:2000,Fasteners — Acceptance inspection,Éléments de fixation — Contrôle de réception,2000-05-25,3,['21.060.01'],ISO/TC 2/SC 7,9599,[8496],"[72605,61180]","['en','
• ISO 3270:19808497,IS,,ISO 3270:1980,Paints and varnishes and their raw materials — Temperatures and humidities for conditioning and testing,Peintures et vernis et leurs matières premières — Tem
• ISO 3271:19758499,IS,,ISO 3271:1975,Iron ores — Determination of tumbler strength,Minerais de fer — Essai au tambour,1975-02-01,1,['73.060.10'],ISO/TC 102,9599,,[8500],"['en','fr']",5
• ISO 3271:19858500,IS,,ISO 3271:1985,Iron ores — Determination of tumbler strength,Minerais de fer — Essai au tambour,1985-02-07,2,['73.060'],ISO/TC 102/SC 3,9599,[8499],[1652],"['en','fr']",6
• ISO 3271:19951652,IS,,ISO 3271:1995,Iron ores — Determination of tumble strength,Minerais de fer — Essai au tambour,1995-11-09,3,['73.060.10'],ISO/TC 102/SC 3,9599,[8500],[38081],"['en','fr']",
• ISO 3271:200738081,IS,,ISO 3271:2007,Iron ores for blast furnace and direct reduction feedstocks — Determination of the tumble and abrasion indices,Minerais de fer pour charges de hauts fournea
• ISO 3272-1:19838501,IS,,ISO 3272-1:1983,Microfilming of technical drawings and other drawing office documents — Part 1: Operating procedures,Micrographie des dessins techniques et autres document
• ISO 3272-2:19788502,IS,,ISO 3272-2:1978,Microfilming of technical drawings and other drawing office documents — Part 2: Quality criteria and control,Micrographie des dessins techniques et autres
• ISO 3272-2:1978/Amd 1:19808504,IS,Amd,ISO 3272-2:1978/Amd 1:1980,Microfilming of technical drawings and other drawing office documents — Part 2: Quality criteria and control — Amendment 1,Micrographie des d
• ISO 3272-3:19758505,IS,,ISO 3272-3:1975,Microcopying of technical drawings and other drawing office documents — Part 3: Unitized 35 mm microfilm carriers,Microcopie des dessins techniques et autr
• ISO 3274:19758510,IS,,ISO 3274:1975,"Instruments for the measurement of surface roughness by the profile method — Contact (stylus) instruments of consecutive profile transformation — Contact pr
• ISO 3274:19961916,IS,,ISO 3274:1996,Geometrical Product Specifications (GPS) — Surface texture: Profile method — Nominal characteristics of contact (stylus) instruments,Spécification géométriqu
• ISO 3274:1996/Cor 1:199829873,IS,Cor,ISO 3274:1996/Cor 1:1998,Geometrical Product Specifications (GPS) — Surface texture: Profile method — Nominal characteristics of contact (stylus) instruments — Technic
• ISO 3276:19758512,IS,,ISO 3276:1975,Withdrawal of ISO 3276-1975,Annulation de l'ISO 3276-1975,1975-02-01,1,['53.040.01'],ISO/TC 101,9599,,[13741],"['en','fr']",1
• ISO 3277:19748513,IS,,ISO 3277:1974,Withdrawal of ISO 3277-1974,Annulation de l'ISO 3277-1974,1974-12-01,1,['53.040.01'],ISO/TC 101,9599,,[13741],"['en','fr']",2
• ISO 3278:19748514,IS,,ISO 3278:1974,Withdrawal of ISO 3278-1974,Annulation de l'ISO 3278-1974,1974-12-01,1,['53.040.01'],ISO/TC 101,9599,,[13741],"['en','fr']",1
• ISO 3279:19748515,IS,,ISO 3279:1974,Withdrawal of ISO 3279-1974,Annulation de l'ISO 3279-1974,1974-12-01,1,['53.040.01'],ISO/TC 101,9599,,[13741],"['en','fr']",1
• ISO 3280:19748516,IS,,ISO 3280:1974,Withdrawal of ISO 3280-1974,Annulation de l'ISO 3280-1974,1974-12-01,1,['53.040.01'],ISO/TC 101,9599,,[13741],"['en','fr']",1
• ISO 3281:19748517,IS,,ISO 3281:1974,Withdrawal of ISO 3281-1974,Annulation de l'ISO 3281-1974,1974-11-01,1,['53.040.01'],ISO/TC 101,9599,,[13741],"['en','fr']",1
• ISO 3283:19748519,IS,,ISO 3283:1974,Withdrawal of ISO 3283-1974,Annulation de l'ISO 3283-1974,1974-12-01,1,['53.040.01'],ISO/TC 101,9599,,[13741],"['en','fr']",2
• ISO 3285:19748521,IS,,ISO 3285:1974,Road vehicles — Ignition coil fixing band,Véhicules routiers — Bande de fixation pour bobines d'allumage,1974-12-01,1,['43.060.50'],ISO/TC 22,9599,,[8522],"[

← records 3,201–3,600 · All of Withdrawn and superseded ISO standards · records 4,001 on →