Records 2,401–2,800 — Withdrawn and superseded ISO standards

Records 2,401 to 2,800 of 24,640. Each links to its own page, which carries the source URL and the quoted line that states the value.

• ISO 1889:19876565,IS,,ISO 1889:1987,"Textile glass — Continuous filament yarns, staple fibre yarns, textured yarns and rovings (packages) — Determination of linear density","Verre textile — Fil
• ISO 1889:199723634,IS,,ISO 1889:1997,Reinforcement yarns — Determination of linear density,Fils de renfort — Détermination de la masse linéique,1997-05-15,3,['59.100.01'],ISO/TC 61/SC 13,9599,"
• ISO 1890:19756566,IS,,ISO 1890:1975,Textile glass products — Continuous filament yarns and staple fibre yarns — Determination of twist,Produits en verre textile — Fils de silionne et de verrann
• ISO 1890:19866567,IS,,ISO 1890:1986,Textile glass — Continuous filament yarns and staple fibre yarns — Determination of twist,Verre textile — Fils de silionne et de verranne — Détermination de
• ISO 1890:199721503,IS,,ISO 1890:1997,Reinforcement yarns — Determination of twist,Fils de renfort — Détermination de la torsion,1997-05-15,3,['59.100.01'],ISO/TC 61/SC 13,9599,[6567],[52989],"[
• ISO 1891:19796568,IS,,ISO 1891:1979,"Bolts, screws, nuts and accessories — Terminology and nomenclature","Vis, écrous et accessoires — Terminologie et nomenclature",1979-12-01,1,['21.060.01'],I
• ISO 1893:19896570,IS,,ISO 1893:1989,Refractory products — Determination of refractoriness-under-load (differential - with rising temperature),Produits réfractaires — Détermination de l'affaisse
• ISO 1893:200538785,IS,,ISO 1893:2005,Refractory products — Determination of refractoriness-under-load — Differential method with rising temperature,Produits réfractaires — Détermination de l'af
• ISO 1894:19796571,IS,,ISO 1894:1979,Withdrawal of ISO 1894-1979,Annulation de l'ISO 1894-1979,1979-07-01,2,['55.180.10'],ISO/TC 104,9599,,[6076],"['en','fr']",1
• ISO 1919:19826609,IS,,ISO 1919:1982,"Road vehicles — Spark plugs M 14 x 1,25 with flat seating and their cylinder head housing","Véhicules routiers — Bougies d'allumage M 14 x 1,25 à siège plat
• ISO 1919:19886610,IS,,ISO 1919:1988,"Road vehicles — M14 x 1,25 spark-plugs with flat seating and their cylinder head housings","Véhicules routiers — Bougies d'allumage M14 x 1,25 à siège plat
• ISO 1920-2:200529098,IS,,ISO 1920-2:2005,Testing of concrete — Part 2: Properties of fresh concrete,Essais du béton — Partie 2: Caractéristiques du béton frais,2005-04-15,1,['91.100.30'],ISO/TC 7
• ISO 1920-3:200440554,IS,,ISO 1920-3:2004,Testing of concrete — Part 3: Making and curing test specimens,Essais du béton — Partie 3: Confection et prise des éprouvettes,2004-10-01,1,['91.100.30'],
• ISO 1920-4:200540764,IS,,ISO 1920-4:2005,Testing of concrete — Part 4: Strength of hardened concrete,Essais du béton — Partie 4: Résistance du béton durci,2005-08-03,1,['91.100.30'],ISO/TC 71/SC
• ISO 1920-5:200440734,IS,,ISO 1920-5:2004,Testing of concrete — Part 5: Properties of hardened concrete other than strength,Essais du béton — Partie 5: Caractéristiques du béton durci autres que l
• ISO 1920-6:200440552,IS,,ISO 1920-6:2004,"Testing of concrete — Part 6: Sampling, preparing and testing of concrete cores","Essais du béton — Partie 6: Échantillonnage, préparation et essais sur
• ISO 1920:19766611,IS,,ISO 1920:1976,"Concrete tests — Dimensions, tolerances and applicability of test specimens","Essais des bétons — Dimensions, tolérances et destination des éprouvettes",197
• ISO 1922:19816612,IS,,ISO 1922:1981,Cellular plastics — Determination of shear strength of rigid materials,Plastiques alvéolaires — Détermination de la résistance au cisaillement des matériaux
• ISO 1922:200130407,IS,,ISO 1922:2001,Rigid cellular plastics — Determination of shear strength,Plastiques alvéolaires rigides — Détermination de la résistance au cisaillement,2001-07-05,3,['83.
• ISO 1922:201260770,IS,,ISO 1922:2012,Rigid cellular plastics — Determination of shear strength,Plastiques alvéolaires rigides — Détermination de la résistance au cisaillement,2012-07-31,4,['83.
• ISO 1924-1:19836615,IS,,ISO 1924-1:1983,Paper and board — Determination of tensile properties — Part 1: Constant rate of loading method,,1983-11-01,1,['85.060'],ISO/TC 6/SC 2,9599,[6614],[6616],"
• ISO 1924-2:19856617,IS,,ISO 1924-2:1985,Paper and board — Determination of tensile properties — Part 2: Constant rate of elongation method,Papier et carton — Détermination des propriétés de tract
• ISO 1924-2:19946618,IS,,ISO 1924-2:1994,Paper and board — Determination of tensile properties — Part 2: Constant rate of elongation method,Papier et carton — Détermination des propriétés de tract
• ISO 1924:19766614,IS,,ISO 1924:1976,Paper and board — Determination of tensile strength,Papiers et cartons — Détermination de la résistance à la traction,1976-06-01,2,['85.060'],ISO/TC 6,9599,,
• ISO 1925:19816619,IS,,ISO 1925:1981,Balancing — Vocabulary,Équilibrage — Vocabulaire,1981-07-01,2,"['21.120.40','01.040.21']",ISO/TC 108,9599,,[6620],"['en','fr']",10
• ISO 1925:19906620,IS,,ISO 1925:1990,Mechanical vibration — Balancing — Vocabulary,Vibrations mécaniques — Équilibrage — Vocabulaire,1990-05-24,3,"['21.120.40','01.040.21']",ISO/TC 108,9599,[661
• ISO 1925:1990/Amd 1:19956621,IS,Amd,ISO 1925:1990/Amd 1:1995,Mechanical vibration — Balancing — Vocabulary — Amendment 1,Vibrations mécaniques — Équilibrage — Vocabulaire — Amendement 1,1995-11-16,3,"['21
• ISO 1925:200134107,IS,,ISO 1925:2001,Mechanical vibration — Balancing — Vocabulary,Vibrations mécaniques — Équilibrage — Vocabulaire,2001-03-22,4,"['21.120.40','01.040.21']",ISO/TC 108/SC 2,959
• ISO 1926:19796622,IS,,ISO 1926:1979,Cellular plastics — Determination of tensile properties of rigid materials,Plastiques alvéolaires — Détermination des caractéristiques de traction des matéri
• ISO 1926:200534845,IS,,ISO 1926:2005,Rigid cellular plastics — Determination of tensile properties,Plastiques alvéolaires rigides — Détermination des caractéristiques en traction,2005-06-22,3,[
• ISO 1927:19756624,IS,,ISO 1927:1975,Refractory products — Classification of prepared unshaped refractory materials (dense and insulating),Matériaux réfractaires — Classification des matériaux r
• ISO 1927:19846625,IS,,ISO 1927:1984,Prepared unshaped refractory materials (dense and insulating) — Classification,Matériaux réfractaires non façonnés préparés (denses et isolants) — Classifica
• ISO 1928:19766626,IS,,ISO 1928:1976,"Solid mineral fuels — Determination of gross calorific value by the calorimeter bomb method, and calculation of net calorific value","Combustibles minéraux
• ISO 1928:199520747,IS,,ISO 1928:1995,"Solid mineral fuels — Determination of gross calorific value by the bomb calorimetric method, and calculation of net calorific value","Combustibles minérau
• ISO 1928:200941592,IS,,ISO 1928:2009,Solid mineral fuels — Determination of gross calorific value by the bomb calorimetric method and calculation of net calorific value,Combustibles minéraux so
• ISO 1928:202075883,IS,,ISO 1928:2020,Coal and coke — Determination of gross calorific value,Charbon et coke — Détermination du pouvoir calorifique supérieur,2020-10-05,4,['75.160.10'],ISO/TC 27
• ISO 1929:19746627,IS,,ISO 1929:1974,"Abrasive belts — Designation, dimensions and tolerances","Bandes abrasives — Désignation, dimensions et tolérances",1974-11-01,1,['25.100.70'],ISO/TC 29/SC
• ISO 1938-1:201541132,IS,,ISO 1938-1:2015,Geometrical product specifications (GPS) — Dimensional measuring equipment — Part 1: Plain limit gauges of linear size,Spécification géométrique des produ
• ISO 1940-1:19866635,IS,,ISO 1940-1:1986,Mechanical vibration — Balance quality requirements of rigid rotors — Part 1: Determination of permissible residual unbalance,Vibrations mécaniques — Exige
• ISO 1940-1:200327092,IS,,ISO 1940-1:2003,Mechanical vibration — Balance quality requirements for rotors in a constant (rigid) state — Part 1: Specification and verification of balance tolerances,
• ISO 1940-1:2003/Cor 1:200541364,IS,Cor,ISO 1940-1:2003/Cor 1:2005,Mechanical vibration — Balance quality requirements for rotors in a constant (rigid) state — Part 1: Specification and verification of balan
• ISO 1940-2:19976636,IS,,ISO 1940-2:1997,Mechanical vibration — Balance quality requirements of rigid rotors — Part 2: Balance errors,Vibrations mécaniques — Exigences en matière de qualité dans l
• ISO 1940:19736634,IS,,ISO 1940:1973,Balance quality of rotating rigid bodies,Qualité d'équilibrage des corps rigides en rotation,1973-05-01,1,['21.120.40'],ISO/TC 108,9599,,[6635],"['en','fr']"
• ISO 1942-1:19776646,IS,,ISO 1942-1:1977,Withdrawal of ISO 1942/1-1977,Annulation de l'ISO 1942/1-1977,1977-10-01,3,"['11.060.01','01.040.11']",ISO/TC 106/SC 3,9599,,[6638],"['en','fr']",3
• ISO 1942-1:19896647,IS,,ISO 1942-1:1989,Dental vocabulary — Part 1: General and clinical terms,Vocabulaire de l'art dentaire — Partie 1: Termes généraux et cliniques,1989-06-29,4,"['11.060.01','0
• ISO 1942-1:1989/Amd 1:19926649,IS,Amd,ISO 1942-1:1989/Amd 1:1992,Dental vocabulary — Part 1: General and clinical terms — Amendment 1,Vocabulaire de l'art dentaire — Partie 1: Termes généraux et cliniques —
• ISO 1942-1:1989/Amd 2:19926650,IS,Amd,ISO 1942-1:1989/Amd 2:1992,Dental vocabulary — Part 1: General and clinical terms — Amendment 2,Vocabulaire de l'art dentaire — Partie 1: Termes généraux et cliniques —
• ISO 1942-1:1989/Amd 3:19936651,IS,Amd,ISO 1942-1:1989/Amd 3:1993,Dental vocabulary — Part 1: General and clinical terms — Amendment 3,Vocabulaire de l'art dentaire — Partie 1: Termes généraux et cliniques —
• ISO 1942-1:1989/Amd 5:199320658,IS,Amd,ISO 1942-1:1989/Amd 5:1993,Dental vocabulary — Part 1: General and clinical terms — Amendment 5,Vocabulaire de l'art dentaire — Partie 1: Termes généraux et cliniques
• ISO 1942-2:19776653,IS,,ISO 1942-2:1977,Withdrawal of ISO 1942/2-1977,Annulation de l'ISO 1942/2-1977,1977-10-01,2,"['11.060.01','01.040.11']",ISO/TC 106/SC 3,9599,,[6638],"['en','fr']",5
• ISO 1942-2:19896654,IS,,ISO 1942-2:1989,Dental vocabulary — Part 2: Dental materials,Vocabulaire de l'art dentaire — Partie 2: Produits dentaires,1989-06-29,3,"['11.060.10','01.040.11']",ISO/TC 1
• ISO 1942-2:1989/Amd 1:19926655,IS,Amd,ISO 1942-2:1989/Amd 1:1992,Dental vocabulary — Part 2: Dental materials — Amendment 1,Vocabulaire de l'art dentaire — Partie 2: Produits dentaires — Amendement 1,1992-0
• ISO 1942-2:1989/Amd 2:19926656,IS,Amd,ISO 1942-2:1989/Amd 2:1992,Dental vocabulary — Part 2: Dental materials — Amendment 2,Vocabulaire de l'art dentaire — Partie 2: Produits dentaires — Amendement 2,1992-0
• ISO 1942-3:19776658,IS,,ISO 1942-3:1977,Withdrawal of ISO 1942/3-1977,Annulation de l'ISO 1942/3-1977,1977-10-01,2,"['11.060.01','01.040.11']",ISO/TC 106/SC 3,9599,,[6638],"['en','fr']",10
• ISO 1942-3:19896659,IS,,ISO 1942-3:1989,Dental vocabulary — Part 3: Dental instruments,Vocabulaire de l'art dentaire — Partie 3: Instruments dentaires,1989-06-29,3,"['11.060.20','01.040.11']",ISO
• ISO 1942-3:1989/Amd 1:19926660,IS,Amd,ISO 1942-3:1989/Amd 1:1992,Dental vocabulary — Part 3: Dental instruments — Amendment 1,Vocabulaire de l'art dentaire — Partie 3: Instruments dentaires — Amendement 1,1
• ISO 1942-3:1989/Amd 2:19926661,IS,Amd,ISO 1942-3:1989/Amd 2:1992,Dental vocabulary — Part 3: Dental instruments — Amendment 2,Vocabulaire de l'art dentaire — Partie 3: Instruments dentaires — Amendement 2,1
• ISO 1942-4:19766663,IS,,ISO 1942-4:1976,Withdrawal of ISO 1942/4-1976,Annulation de l'ISO 1942/4-1976,1976-11-01,1,"['11.060.01','01.040.11']",ISO/TC 106/SC 3,9599,,[6638],"['en','fr']",3
• ISO 1942-4:19896664,IS,,ISO 1942-4:1989,Dental vocabulary — Part 4: Dental equipment,Vocabulaire de l'art dentaire — Partie 4: Matériel dentaire,1989-06-29,2,"['11.060.20','01.040.11']",ISO/TC 10
• ISO 1942-4:1989/Amd 1:19926665,IS,Amd,ISO 1942-4:1989/Amd 1:1992,Dental vocabulary — Part 4: Dental equipment — Amendment 1,Vocabulaire de l'art dentaire — Partie 4: Matériel dentaire — Amendement 1,1992-07
• ISO 1942-5:19896667,IS,,ISO 1942-5:1989,Dental vocabulary — Part 5: Terms associated with testing,Vocabulaire de l'art dentaire — Partie 5: Termes associés aux essais,1989-06-29,2,"['11.060.01','
• ISO 1942:19836638,IS,,ISO 1942:1983,Dental vocabulary,Vocabulaire de l'art dentaire,1983-03-01,1,"['11.060.01','01.040.11']",ISO/TC 106/SC 3,9599,"[6658,6663,6646,6653]","[6654,6647,6659,6667,6
• ISO 1942:1983/Add 1:19836639,IS,Add,ISO 1942:1983/Add 1:1983,Dental vocabulary — Addendum 1,Vocabulaire de l'art dentaire — Additif 1,1983-09-01,1,"['11.060.01','01.040.11']",ISO/TC 106/SC 3,9599,,"[6654,
• ISO 1942:1983/Add 2:19836640,IS,Add,ISO 1942:1983/Add 2:1983,Dental vocabulary — Addendum 2,Vocabulaire de l'art dentaire — Additif 2,1983-12-01,1,"['11.060.01','01.040.11']",ISO/TC 106/SC 3,9599,,"[6654,
• ISO 1942:1983/Add 3:19836641,IS,Add,ISO 1942:1983/Add 3:1983,Dental vocabulary — Addendum 3,Vocabulaire de l'art dentaire — Additif 3,1983-12-01,1,"['11.060.01','01.040.11']",ISO/TC 106/SC 3,9599,,"[6654,
• ISO 1942:1983/Add 4:19846642,IS,Add,ISO 1942:1983/Add 4:1984,Dental vocabulary — Addendum 4,Vocabulaire de l'art dentaire — Additif 4,1984-08-01,1,"['11.060.01','01.040.11']",ISO/TC 106/SC 3,9599,,"[6654,
• ISO 1942:1983/Add 5:19856643,IS,Add,ISO 1942:1983/Add 5:1985,Dental vocabulary — Addendum 5,Vocabulaire de l'art dentaire — Additif 5,1985-08-29,1,"['11.060.01','01.040.11']",ISO/TC 106/SC 3,9599,,"[6654,
• ISO 1942:1983/Add 6:19856644,IS,Add,ISO 1942:1983/Add 6:1985,Dental vocabulary — Addendum 6,Vocabulaire de l'art dentaire — Additif 6,1985-07-11,1,"['11.060.01','01.040.11']",ISO/TC 106/SC 3,9599,,"[6654,
• ISO 1942:200950179,IS,,ISO 1942:2009,Dentistry — Vocabulary,Médecine bucco-dentaire — Vocabulaire,2009-12-03,2,"['11.060.01','01.040.11']",ISO/TC 106/SC 3,9599,"[6651,6659,6660,6667,6654,6661,6
• ISO 1948:19736672,IS,,ISO 1948:1973,Photography — Front lens barrels up to 100 mm — Dimensions important to the connection of auxiliaries,Photographie,1973-10-01,1,['37.040.10'],ISO/TC 42,9599,
• ISO 1949:19736674,IS,,ISO 1949:1973,Design requirements for aircraft electrical plug and socket connectors,Caractéristiques des connecteurs électriques pour aéronefs,1973-05-01,1,['49.060'],ISO
• ISO 1950:19746676,IS,,ISO 1950:1974,"Aircraft — Identification of servicing, maintenance, ground handling and safety/hazard points","Aéronefs — Identification des points d'alimentation au sol,
• ISO 1951:19736677,IS,,ISO 1951:1973,Lexicographical symbols particularly for use in classified defining vocabularies,Symboles lexicographiques particulièrement pour l'emploi dans les vocabulair
• ISO 1951:19976678,IS,,ISO 1951:1997,Lexicographical symbols and typographical conventions for use in terminography,Symboles lexicographiques et conventions typographiques à utiliser en terminog
• ISO 1951:200736609,IS,,ISO 1951:2007,"Presentation/representation of entries in dictionaries — Requirements, recommendations and information","Présentation/représentation des entrées dans les d
• ISO 1952:19766679,IS,,ISO 1952:1976,Brown coals and lignites — Method of extraction for the determination of sodium and potassium soluble in dilute hydrochloric acid,Charbons bruns et lignites
• ISO 1952:200841590,IS,,ISO 1952:2008,Solid mineral fuels — Determination of extractable metals in dilute hydrochloric acid,Combustibles minéraux solides — Détermination des métaux extractibles
• ISO 1953:19726680,IS,,ISO 1953:1972,Hard coals — Size analysis,Charbon — Analyse granulométrique,1972-08-01,1,['73.040'],ISO/TC 27,9599,,[6681],"['en','fr']",16
• ISO 1953:19946681,IS,,ISO 1953:1994,Hard coal — Size analysis by sieving,Houille — Analyse granulométrique par tamisage,1994-07-14,2,['73.040'],ISO/TC 27/SC 1,9599,[6680],[63664],"['en','fr']",
• ISO 1953:201563664,IS,,ISO 1953:2015,Hard coal — Size analysis by sieving,Houille — Analyse granulométrique par tamisage,2015-11-10,3,['73.040'],ISO/TC 27/SC 1,9599,[6681],[87991],['en'],13
• ISO 1954:19996682,IS,,ISO 1954:1999,Plywood — Tolerances on dimensions,Contreplaqué — Tolérances sur dimensions,1999-04-15,1,['79.060.10'],ISO/TC 89/SC 3,9599,,[61093],"['en','fr']",2
• ISO 1957:19736686,IS,,ISO 1957:1973,Machine-made textile floor coverings — Sampling and cutting specimens for physical tests of machine made textile floor coverings,Revêtements de sol textiles
• ISO 1957:19866687,IS,,ISO 1957:1986,Machine-made textile floor coverings — Sampling and cutting specimens for physical tests,Revêtements de sol textiles fabriqués à la machine — Échantillonnage
• ISO 1958:19736688,IS,,ISO 1958:1973,Textile floor coverings — Determination of mass of total pile yarn per unit area,Tapis-moquettes — Détermination de la masse totale du fil de velours par uni
• ISO 1959:19736689,IS,,ISO 1959:1973,Textile floor coverings — Determination of measured surface pile density and measured pile fibre volume ratio,Tapis-moquettes — Détermination de la masse vol
• ISO 1964:19756691,IS,,ISO 1964:1975,Shipbuilding — Indication of details on the general arrangement plans of ships,Construction navale — Figuration des détails sur les plans généraux d'installa
• ISO 1966:19736694,IS,,ISO 1966:1973,Crimped joints for aircraft electrical cables,Raccordements sertis pour câbles électriques utilisés à bord des aéronefs,1973-02-01,1,['49.060'],ISO/TC 20/SC
• ISO 1968:19736697,IS,,ISO 1968:1973,Ropes and cordage — Vocabulary,Cordages et articles de corderie — Vocabulaire,1973-09-01,3,"['59.080.50','01.040.59']",ISO/TC 38,9599,,[23038],"['en','fr']",
• ISO 1969:19766698,IS,,ISO 1969:1976,Ropes and cordage — Three-strand polyethylene monofilament ropes,Cordages en monofilaments de polyéthylène à trois torons,1976-04-01,1,['59.080.50'],ISO/TC 3
• ISO 1969:19906699,IS,,ISO 1969:1990,Ropes — Polyethylene — Specification,Cordages — Polyéthylène — Spécifications,1990-11-01,2,['59.080.50'],ISO/TC 38,9599,[6698],[36584],"['en','fr']",3
• ISO 1973:19766702,IS,,ISO 1973:1976,Textiles — Determination of linear density of fibres — Gravimetric method,Fibres textiles — Détermination de la masse linéique — Méthode gravimétrique,1976-1
• ISO 1973:19956703,IS,,ISO 1973:1995,Textile fibres — Determination of linear density — Gravimetric method and vibroscope method,Fibres textiles — Détermination de la masse linéique — Méthode gr
• ISO 1974:19856704,IS,,ISO 1974:1985,Paper — Determination of tearing resistance,Papier — Détermination de la résistance au déchirement,1985-10-17,2,['85.060'],ISO/TC 6/SC 2,9599,,[6705],"['en',
• ISO 1974:19906705,IS,,ISO 1974:1990,Paper — Determination of tearing resistance (Elmendorf method),Papier — Détermination de la résistance au déchirement (Méthode Elmendorf),1990-02-08,3,['85.0
• ISO 1977-1:19766708,IS,,ISO 1977-1:1976,"Conveyor chains, attachments and chain wheels — Part 1: Chains — Metric series","Chaînes convoyeurs, plaques d'attache et roues pour chaînes — Partie 1: C
• ISO 1977-2:19746709,IS,,ISO 1977-2:1974,"Conveyor chains, attachments and chain wheels — Part 2: Chain wheels","Chaînes convoyeurs, plaques d'attache et roues pour chaînes — Partie 2: Roues pour
• ISO 1977-3:19746710,IS,,ISO 1977-3:1974,"Conveyor chains, attachments and chain wheels — Part 3: Attachments — Metric series","Chaînes convoyeurs, plaques d'attache et roues pour chaînes — Partie
• ISO 1977:200025831,IS,,ISO 1977:2000,"Conveyor chains, attachments and sprockets","Chaînes de manutention, plaques-attaches et roues dentées",2000-11-09,1,['53.040.20'],ISO/TC 100,9599,"[6708,6
• ISO 1984-0:19846717,IS,,ISO 1984-0:1984,"Test conditions for milling machines with table of fixed height, with horizontal or vertical spindle — Part 0: General introduction","Conditions de récept
• ISO 1984:19826716,IS,,ISO 1984:1982,Acceptance conditions for milling machines with table of fixed height with horizontal or vertical spindle — Testing of accuracy,"Conditions de réception des
• ISO 1985:19746718,IS,,ISO 1985:1974,Test conditions for surface grinding machines with vertical grinding wheel spindle and reciprocating table — Testing of accuracy,"Conditions d'essais des mac
• ISO 1985:19856719,IS,,ISO 1985:1985,Acceptance conditions for surface grinding machines with vertical grinding wheel spindle and reciprocating table — Testing of accuracy,"Conditions de récepti
• ISO 1985:199822727,IS,,ISO 1985:1998,Machine tools — Test conditions for surface grinding machines with vertical grinding wheel spindle and reciprocating table — Testing of the accuracy,"Machin
• ISO 1986-1:200127641,IS,,ISO 1986-1:2001,Test conditions for surface grinding machines with horizontal grinding wheel spindle and reciprocating table — Testing of the accuracy — Part 1: Machines
• ISO 1986:19746720,IS,,ISO 1986:1974,Test conditions for surface grinding machines with horizontal grinding wheel spindle and reciprocating table — Testing of accuracy,"Conditions d'essais des m
• ISO 1986:19856721,IS,,ISO 1986:1985,Acceptance conditions for surface grinding machines with horizontal grinding wheel spindle and reciprocating table — Testing of accuracy,"Conditions de récep
• ISO 1988:19756722,IS,,ISO 1988:1975,Hard coal — Sampling,Charbons et lignites durs — Échantillonnage,1975-03-01,1,['73.040'],ISO/TC 27/SC 4,9599,,[31776],"['en','fr']",90
• ISO 1989:19786723,IS,,ISO 1989:1978,Programming languages — COBOL,Langages de programmation — COBOL,1978-02-01,1,['35.060'],ISO/IEC JTC 1,9599,,[6724],"['en','fr']",1
• ISO 1989:19856724,IS,,ISO 1989:1985,Programming languages — COBOL,Langages de programmation — COBOL,1985-12-19,2,['35.060'],ISO/IEC JTC 1/SC 22,9599,[6723],[28805],['en'],1
• ISO 1989:1985/Amd 1:19926725,IS,Amd,ISO 1989:1985/Amd 1:1992,Programming languages — COBOL — Amendment 1: Intrinsic function module,Langages de programmation — COBOL — Amendement 1: Module de fonction int
• ISO 1989:1985/Amd 2:199421818,IS,Amd,ISO 1989:1985/Amd 2:1994,Programming languages — COBOL — Amendment 2: Correction and clarification amendment for COBOL,Langages de programmation — COBOL — Amendement 2
• ISO 1991-2:19856729,IS,,ISO 1991-2:1985,Vegetables — Nomenclature — Second list,Légumes — Nomenclature — Deuxième liste,1985-08-22,1,"['67.080.20','01.040.67']",ISO/TC 34,9599,,[6730],"['en','fr'
• ISO 1992-1:19746731,IS,,ISO 1992-1:1974,"Commercial refrigerated cabinets — Methods of test — Part 1: Calculation of linear dimensions, areas and volumes",Meubles frigorifiques commerciaux — Méth
• ISO 1992-4:19746736,IS,,ISO 1992-4:1974,Commercial refrigerated cabinets — Methods of test — Part 4: Defrosting test,Meubles frigorifiques commerciaux — Méthodes d'essai — Partie 4: Essai de dégi
• ISO 1992-5:19746737,IS,,ISO 1992-5:1974,Commercial refrigerated cabinets — Methods of test — Part 5: Water vapour condensation test,Meubles frigorifiques commerciaux — Méthodes d'essai — Partie 5
• ISO 1992-6:19746738,IS,,ISO 1992-6:1974,Commercial refrigerated cabinets — Methods of test — Part 6: Electrical energy consumption test,Meubles frigorifiques commerciaux — Méthodes d'essai — Part
• ISO 1992-6:1974/Amd 1:19806739,IS,Amd,ISO 1992-6:1974/Amd 1:1980,Commercial refrigerated cabinets — Methods of test — Part 6: Electrical energy consumption test — Amendment 1,Meubles frigorifiques commercia
• ISO 1996-1:19826748,IS,,ISO 1996-1:1982,Acoustics — Description and measurement of environmental noise — Part 1: Basic quantities and procedures,Acoustique — Caractérisation et mesurage du bruit
• ISO 1996-1:200328633,IS,,ISO 1996-1:2003,"Acoustics — Description, measurement and assessment of environmental noise — Part 1: Basic quantities and assessment procedures","Acoustique — Descripti
• ISO 1996-2:19876749,IS,,ISO 1996-2:1987,Acoustics — Description and measurement of environmental noise — Part 2: Acquisition of data pertinent to land use,Acoustique — Caractérisation et mesurage
• ISO 1996-2:1987/Amd 1:199823776,IS,Amd,ISO 1996-2:1987/Amd 1:1998,Acoustics — Description and measurement of environmental noise — Part 2: Acquisition of data pertinent to land use — Amendment 1,Acoustique
• ISO 1996-2:200741860,IS,,ISO 1996-2:2007,"Acoustics — Description, measurement and assessment of environmental noise — Part 2: Determination of environmental noise levels","Acoustique — Descripti
• ISO 1996-3:19876750,IS,,ISO 1996-3:1987,Acoustics — Description and measurement of environmental noise — Part 3: Application to noise limits,Acoustique — Caractérisation et mesurage du bruit de l
• ISO 1997:19726751,IS,,ISO 1997:1972,Granulated cork and cork powder — Specifications,Granulés crus et poudre de liège — Spécifications,1972-03-01,1,['79.100'],ISO/TC 87,9599,,[6752],"['en','fr'
• ISO 1997:19926752,IS,,ISO 1997:1992,"Granulated cork and cork powder — Classification, properties and packing","Granulés crus et poudre de liège — Classification, caractéristiques et emballage"
• ISO 1998-1:19746753,IS,,ISO 1998-1:1974,Petroleum industry — Vocabulary,Industrie pétrolière — Vocabulaire,1974-12-01,1,"['01.040.75','75.080']",ISO/TC 28,9599,,"[25408,25405,25406,23185,25402,25
• ISO 1998-2:19766755,IS,,ISO 1998-2:1976,Petroleum industry — Vocabulary,Industrie pétrolière — Vocabulaire,1976-12-01,1,"['01.040.75','75.080']",ISO/TC 28,9599,,"[25408,25405,25406,23185,25402,25
• ISO 1999:19756758,IS,,ISO 1999:1975,Acoustics — Assessment of occupational noise exposure for hearing conservation purposes,Acoustique — Estimation de l'exposition au bruit durant le travail en
• ISO 1999:19906759,IS,,ISO 1999:1990,Acoustics — Determination of occupational noise exposure and estimation of noise-induced hearing impairment,Acoustique — Détermination de l'exposition au bru
• ISO 2000:19786760,IS,,ISO 2000:1978,"Rubber, natural (NR) — Specifications",Caoutchouc naturel (NR) — Spécifications,1978-05-01,4,['83.060'],ISO/TC 45,9599,,[6761],"['en','fr']",1
• ISO 2000:19896761,IS,,ISO 2000:1989,"Rubber, raw natural — Specification",Caoutchouc naturel brut — Spécifications,1989-07-13,5,['83.040.10'],ISO/TC 45/SC 3,9599,[6760],"[24580,38922]","['en','
• ISO 2000:200338922,IS,,ISO 2000:2003,"Rubber, raw natural — Guidelines for the specification of technically specified rubber (TSR)",Caoutchouc naturel brut — Lignes directrices pour la spécific
• ISO 2000:201451091,IS,,ISO 2000:2014,"Rubber, raw natural — Guidelines for the specification of technically specified rubber (TSR)",Caoutchouc naturel brut — Lignes directrices pour la spécific
• ISO 2002:19756762,IS,,ISO 2002:1975,Raw styrene-butadiene rubber (SBR) — Determination of organic acid content,Butadiène-styrène (SBR) brut — Dosage des acides organiques,1975-02-01,1,['83.040.
• ISO 2003:19756763,IS,,ISO 2003:1975,Raw styrene-butadiene rubber (SBR) — Determination of soap content,Butadiène-styrène (SBR) brut — Dosage des savons,1975-01-01,1,['83.040.10'],ISO/TC 45,9599
• ISO 2004:19796764,IS,,ISO 2004:1979,"Rubber latex, natural — Centrifuged or creamed, ammonia-preserved types — Specification","Latex de caoutchouc naturel — Types centrifugés ou crémés, à l'amm
• ISO 2004:19886765,IS,,ISO 2004:1988,"Natural rubber latex concentrate — Centrifuged or creamed, ammonia-preserved types — Specification","Latex concentré de caoutchouc naturel — Types centrifug
• ISO 2004:199723841,IS,,ISO 2004:1997,"Natural rubber latex concentrate — Centrifuged or creamed, ammonia-preserved types — Specification","Latex concentré de caoutchouc naturel — Types centrifu
• ISO 2004:201046062,IS,,ISO 2004:2010,"Natural rubber latex concentrate — Centrifuged or creamed, ammonia-preserved types — Specifications","Latex concentré de caoutchouc naturel — Types centrif
• ISO 2004:201770281,IS,,ISO 2004:2017,"Natural rubber latex concentrate — Centrifuged or creamed, ammonia-preserved types — Specifications","Latex concentré de caoutchouc naturel — Types centrif
• ISO 2005:19746766,IS,,ISO 2005:1974,Natural rubber latex — Determination of sludge content,Latex de caoutchouc naturel — Détermination de la teneur en sédiment,1974-01-01,1,['83.040.10'],ISO/TC
• ISO 2005:19856767,IS,,ISO 2005:1985,Natural rubber latex concentrate — Determination of sludge content,Latex concentré de caoutchouc naturel — Détermination de la teneur en sédiment,1985-10-17,
• ISO 2005:19926768,IS,,ISO 2005:1992,"Rubber latex, natural, concentrate — Determination of sludge content",Latex concentré de caoutchouc naturel — Détermination de la teneur en sédiment,1992-06
• ISO 2005:1992/Amd 1:200642827,IS,Amd,ISO 2005:1992/Amd 1:2006,"Rubber latex, natural, concentrate — Determination of sludge content — Amendment 1: Precision data",Latex concentré de caoutchouc naturel — D
• ISO 2006-1:200946007,IS,,ISO 2006-1:2009,"Rubber latex, synthetic — Determination of mechanical stability — Part 1: High-speed method",Latex de caoutchouc synthétique — Détermination de la stabil
• ISO 2006:19746769,IS,,ISO 2006:1974,Synthetic rubber latex — Determination of high-speed mechanical stability,Latex d'élastomère de synthèse — Détermination de la stabilité mécanique à vitesse
• ISO 2006:19856770,IS,,ISO 2006:1985,"Rubber latex, synthetic — Determination of high-speed mechanical stability",Latex de caoutchouc synthétique — Détermination de la stabilité mécanique à vite
• ISO 2007:19816771,IS,,ISO 2007:1981,"Rubber, unvulcanized — Determination of plasticity — Rapid plastimeter method",Caoutchouc non vulcanisé — Détermination de l'indice rapide de plasticité — M
• ISO 2007:19916772,IS,,ISO 2007:1991,"Rubber, unvulcanized — Determination of plasticity — Rapid-plastimeter method",Caoutchouc non vulcanisé — Détermination de la plasticité — Méthode au plasto
• ISO 2007:200745386,IS,,ISO 2007:2007,"Rubber, unvulcanized — Determination of plasticity — Rapid-plastimeter method",Caoutchouc non vulcanisé — Détermination de la plasticité — Méthode au plast
• ISO 2007:201870324,IS,,ISO 2007:2018,"Rubber, unvulcanized — Determination of plasticity — Rapid-plastimeter method",Caoutchouc non vulcanisé — Détermination de la plasticité — Méthode au plast
• ISO 2008:19806773,IS,,ISO 2008:1980,"Rubber latex, styrene-butadiene — Determination of volatile unsaturates",Latex de butadiène-styrène — Dosage des composés non saturés volatils,1980-04-01,2,
• ISO 2009:19836775,IS,,ISO 2009:1983,Slotted countersunk flat head screws (common head style) — Product grade A,Vis à métaux à tête fraisée fendue — Grade A,1983-07-01,2,['21.060.10'],ISO/TC 2,9
• ISO 2009:19946776,IS,,ISO 2009:1994,Slotted countersunk flat head screws (common head style) — Product grade A,Vis à métaux à tête fraisée fendue — Grade A,1994-04-21,3,['21.060.10'],ISO/TC 2/S
• ISO 2010:19836777,IS,,ISO 2010:1983,Slotted raised countersunk head screws (common head style) — Product grade A,Vis à métaux à tête fraisée bombée fendue — Grade A,1983-07-01,2,['21.060.10'],I
• ISO 2010:19946778,IS,,ISO 2010:1994,Countersunk slotted raised head screws (common head style) — Product grade A,Vis à métaux à tête fraisée bombée fendue — Grade A,1994-04-21,3,['21.060.10'],I
• ISO 2013:19836780,IS,,ISO 2013:1983,Textile machinery and accessories — Beams — Method of measuring variations of form and position,Matériel pour l'industrie textile — Ensouples — Méthode de me
• ISO 2014:19766781,IS,,ISO 2014:1976,Writing of calendar dates in all-numeric form,Représentation numérique des dates,1976-04-01,1,['01.140.30'],ISO/TC 154,9599,,[15903],"['en','fr']",1
• ISO 2015:19766782,IS,,ISO 2015:1976,Numbering of weeks,Numérotage des semaines,1976-06-01,1,['01.140.30'],ISO/TC 154,9599,,[15903],"['en','fr']",2
• ISO 2017:19826784,IS,,ISO 2017:1982,Vibration and shock — Isolators — Procedure for specifying characteristics,Vibrations et chocs — Isolateurs — Dispositions pour la spécification des caractér
• ISO 2020:19736785,IS,,ISO 2020:1973,Flexible steel wire rope for aircraft controls — Technical specification,Câbles en acier souple pour commandes d'aéronefs — Spécifications techniques,1973-02
• ISO 2020:19846786,IS,,ISO 2020:1984,Aerospace — Mechanical system parts — Preformed flexible steel wire rope for aircraft controls — Technical specification,Aéronautique et espace — Éléments de
• ISO 2021:19756789,IS,,ISO 2021:1975,Withdrawal of ISO 2021-1975,Annulation de l'ISO 2021-1975,1975-09-01,1,['35.040.10'],ISO/IEC JTC 1,9599,,[12991],['en'],3
• ISO 2022:19826790,IS,,ISO 2022:1982,Information processing — ISO 7-bit and 8-bit coded character sets — Code extension techniques,Traitement de l'information — Jeux ISO de caractères codés à 7
• ISO 2022:19866791,IS,,ISO 2022:1986,Information processing — ISO 7-bit and 8-bit coded character sets — Code extension techniques,Traitement de l'information — Jeux ISO de caractères codés à 7
• ISO 2023:19736792,IS,,ISO 2023:1973,Lined industrial rubber footwear,"Articles chaussants doublés en élastomère, pour usages généraux et industriels",1973-05-01,1,['13.340.10'],ISO/TC 45,9599,,
• ISO 2023:19946793,IS,,ISO 2023:1994,Rubber footwear — Lined industrial vulcanized-rubber boots — Specification,Articles chaussants en caoutchouc — Bottes doublées en caoutchouc vulcanisé à usag
• ISO 2023:1994/Cor 1:200136317,IS,Cor,ISO 2023:1994/Cor 1:2001,Rubber footwear — Lined industrial vulcanized-rubber boots — Specification — Technical Corrigendum 1,Articles chaussants en caoutchouc — Botte
• ISO 2024:19816794,IS,,ISO 2024:1981,"Rubber footwear, lined conducting — Specification","Chaussures en caoutchouc conducteur, doublées — Spécifications",1981-12-01,2,['13.340.50'],ISO/TC 94/SC
• ISO 2025:19726795,IS,,ISO 2025:1972,Lined industrial rubber boots with general purpose oil resistance,Bottes doublées en élastomère à usage industriel résistant aux hydrocarbures,1972-08-01,1,[
• ISO 2026:19746796,IS,,ISO 2026:1974,Aircraft — Connections for starting engines by air,Aéronefs — Raccords pour le démarrage à l'air des moteurs,1974-11-01,1,"['49.100','49.080']",ISO/TC 20/SC
• ISO 2027:19786797,IS,,ISO 2027:1978,"Rubber, natural latex, evaporated, preserved — Specification","Latex de caoutchouc naturel évaporé, préservé — Spécifications",1978-05-01,2,['83.040.10'],IS
• ISO 2028:19826799,IS,,ISO 2028:1982,Rubber — Synthetic latices — Preparation of dry polymer,Caoutchouc — Latex synthétique — Préparation de polymère sec,1982-04-01,2,['83.040.10'],ISO/TC 45,959
• ISO 2028:19896800,IS,,ISO 2028:1989,Rubber — Synthetic latices — Preparation of dry polymer,Caoutchouc — Latex synthétiques — Préparation de polymère sec,1989-07-13,3,['83.040.10'],ISO/TC 45/SC
• ISO 2028:199927914,IS,,ISO 2028:1999,Synthetic rubber latex — Preparation of dry polymer,Latex de caoutchouc synthétique — Préparation du polymère sec,1999-12-16,4,['83.040.10'],ISO/TC 45/SC 3,
• ISO 2030:19766801,IS,,ISO 2030:1976,Cork — Granulated cork — Size analysis by mechanical sieving,Liège — Granulés crus — Analyse granulométrique par tamisage mécanique,1976-06-01,1,['79.100'],I
• ISO 2030:19906802,IS,,ISO 2030:1990,Granulated cork — Size analysis by mechanical sieving,Granulés crus de liège — Analyse granulométrique par tamisage mécanique,1990-10-25,2,['79.100'],ISO/TC
• ISO 2031:19726803,IS,,ISO 2031:1972,Granulated cork — Bulk density test,Granulés crus de liège — Détermination de la masse volumique,1972-03-01,1,['79.100'],ISO/TC 87,9599,,[6804],['en'],2
• ISO 2031:19916804,IS,,ISO 2031:1991,Granulated cork — Determination of bulk density,Granulés crus de liège — Détermination de la masse volumique,1991-05-02,2,['79.100'],ISO/TC 87,9599,[6803],"[
• ISO 2037:19806809,IS,,ISO 2037:1980,Metal pipes and fittings — Stainless steel tubes for the food industry,Tuyauteries et raccords métalliques — Tubes en acier inoxydable pour l'industrie alime
• ISO 2039-1:19876813,IS,,ISO 2039-1:1987,Plastics — Determination of hardness — Part 1: Ball indentation method,Plastiques — Détermination de la dureté — Partie 1: Méthode de pénétration à la bill
• ISO 2039-1:199321467,IS,,ISO 2039-1:1993,Plastics — Determination of hardness — Part 1: Ball indentation method,Plastiques — Détermination de la dureté — Partie 1: Méthode de pénétration à la bil
• ISO 2039-2:19816814,IS,,ISO 2039-2:1981,Plastics — Determination of hardness by the ball indentation method — Part 2: Rockwell hardness,Plastiques — Détermination de la dureté — Méthode par péné
• ISO 2039:19736811,IS,,ISO 2039:1973,Plastics and ebonite — Determination of hardness by the ball indentation method,Matières plastiques et ébonite — Détermination de la dureté — Méthode de péné
• ISO 2041:19756817,IS,,ISO 2041:1975,Vibration and shock — Vocabulary,Vibrations et chocs — Vocabulaire,1975-08-01,1,"['01.040.17','17.160']",ISO/TC 108,9599,,[6818],"['en','fr']",53
• ISO 2041:19906818,IS,,ISO 2041:1990,Vibration and shock — Vocabulary,Vibrations et chocs — Vocabulaire,1990-08-23,2,"['01.040.17','17.160']",ISO/TC 108,9599,[6817],"[30404,35848]","['en','fr']"
• ISO 2041:200935848,IS,,ISO 2041:2009,"Mechanical vibration, shock and condition monitoring — Vocabulary","Vibrations et chocs mécaniques, et leur surveillance — Vocabulaire",2009-07-17,3,"['01.
• ISO 2043:19746820,IS,,ISO 2043:1974,Unplasticized polyvinyl chloride (PVC) moulded fittings for elastic sealing ring type joints for use under pressure — Oven test,"Raccords moulés en polychlor
• ISO 2045:19736822,IS,,ISO 2045:1973,Single sockets for unplasticized polyvinyl chloride (PVC) pressure pipes with elastic sealing ring type joints — Minimum depths of engagement,Emboîtures simp
• ISO 2045:19886823,IS,,ISO 2045:1988,Single sockets for unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly (vinyl chloride) (PVC-C) pressure pipes with elastic sealing ring type joi
• ISO 2048:19736826,IS,,ISO 2048:1973,Double socket fittings for unplasticized polyvinyl chloride (PVC) pressure pipes with elastic sealing ring type joints — Minimum depths of engagement,Emboîtu
• ISO 2048:19906827,IS,,ISO 2048:1990,Double-socket fittings for unplasticized poly(vinyl chloride) (PVC-U) pressure pipes with elastic sealing ring type joints — Minimum depths of engagement,Man
• ISO 2049:19726828,IS,,ISO 2049:1972,Petroleum products — Determination of colour,Produits pétroliers — Détermination de la couleur,1972-03-01,1,['75.080'],ISO/TC 28,9599,,[20069],"['en','fr']",
• ISO 2056:19766833,IS,,ISO 2056:1976,Withdrawal of ISO 2056-1976,Annulation de l'ISO 2056-1976,1976-02-01,1,['23.040.20'],ISO/TC 138,9599,,[7438],"['en','fr']",3
• ISO 2058:19736835,IS,,ISO 2058:1973,Withdrawal of ISO 2058-1973,Annulation de l'ISO 2058-1973,1973-09-01,1,['83.060'],ISO/TC 45,9599,,[4140],"['en','fr']",2
• ISO 2060:19726836,IS,,ISO 2060:1972,Textiles — Yarn from packages — Determination of linear density (mass per unit length) — Skein method,Textiles — Fils sur enroulements — Détermination de la
• ISO 2061:19726838,IS,,ISO 2061:1972,Textiles — Determination of twist in yarns — Direct counting method,Textiles — Méthode de détermination de la torsion des fils — Méthode directe,1972-09-01,1
• ISO 2061:19956839,IS,,ISO 2061:1995,Textiles — Determination of twist in yarns — Direct counting method,Textiles — Détermination de la torsion des fils — Méthode par comptage direct,1995-10-05,
• ISO 2061:201055555,IS,,ISO 2061:2010,Textiles — Determination of twist in yarns — Direct counting method,Textiles — Détermination de la torsion des fils — Méthode par comptage direct,2010-07-27
• ISO 2062:19726840,IS,,ISO 2062:1972,"Textiles — Yarn from packages — Method for determination of breaking load and elongation at the breaking load of single strands — (CRL, CRE and CRT testers)
• ISO 2062:19936841,IS,,ISO 2062:1993,Textiles — Yarns from packages — Determination of single-end breaking force and elongation at break,Textiles — Fils sur enroulements — Détermination de la fo
• ISO 2063-1:201761893,IS,,ISO 2063-1:2017,"Thermal spraying — Zinc, aluminium and their alloys — Part 1: Design considerations and quality requirements for corrosion protection systems","Projectio
• ISO 2063:19736842,IS,,ISO 2063:1973,Metallic coatings — Protection of iron and steel against corrosion — Metal spraying of zinc and aluminium,Revêtements métalliques — Protection du fer et de l
• ISO 2063:19916843,IS,,ISO 2063:1991,"Metallic and other inorganic coatings — Thermal spraying — Zinc, aluminium and their alloys","Revêtements métalliques et inorganiques — Projection thermique
• ISO 2063:200537440,IS,,ISO 2063:2005,"Thermal spraying — Metallic and other inorganic coatings — Zinc, aluminium and their alloys","Projection thermique — Revêtements métalliques et autres revê
• ISO 2064:19806844,IS,,ISO 2064:1980,Metallic and other non-organic coatings — Definitions and conventions concerning the measurement of thickness,Revêtements métalliques et autres revêtements n
• ISO 2065:19726846,IS,,ISO 2065:1972,Textile machinery and accessories — Cylindrical tubes for tape yarns,Matériel pour l'industrie textile — Tubes cylindriques pour lames textiles,1972-03-01,1,
• ISO 2066:19766847,IS,,ISO 2066:1976,Cork — Expanded pure agglomerated cork — Determination of moisture content,Liège — Agglomérés purs — Détermination de l'humidité,1976-06-01,1,['79.100'],ISO/
• ISO 2066:19866848,IS,,ISO 2066:1986,Expanded pure agglomerated cork — Determination of moisture content,Agglomérés expansés purs de liège — Détermination de l'humidité,1986-10-16,2,['79.100'],I
• ISO 2067:19766849,IS,,ISO 2067:1976,Granulated cork — Sampling,Granulés crus de liège — Échantillonnage,1976-07-01,1,['79.100'],ISO/TC 87,9599,,[6850],"['en','fr']",2
• ISO 2067:19886850,IS,,ISO 2067:1988,Granulated cork — Sampling,Granulés crus de liège — Échantillonnage,1988-11-03,2,['79.100'],ISO/TC 87,9599,[6849],[23233],"['en','fr']",2
• ISO 2067:199823233,IS,,ISO 2067:1998,Granulated cork — Sampling,Granulés crus de liège — Échantillonnage,1998-10-01,3,['79.100'],ISO/TC 87,9599,[6850],"[54918,69752]","['en','fr']",3
• ISO 2070:19816853,IS,,ISO 2070:1981,Aluminium oxide primarily used for the production of aluminium — Determination of calcium content — Naphthalhydroxamic acid spectrophotometric method,Oxyde d
• ISO 2074:19726857,IS,,ISO 2074:1972,Plywood — Vocabulary,Contreplaqué — Vocabulaire,1972-12-01,1,"['79.060.10','01.040.79']",ISO/TC 89,9599,,[43024],"['en','fr']",18
• ISO 2076:19776860,IS,,ISO 2076:1977,Textiles — Man-made fibres — Generic names,Fibres chimiques — Noms génériques,1977-03-01,2,"['01.040.59','59.060.20']",ISO/TC 38,9599,,[6861],"['en','fr']",5
• ISO 2076:19896861,IS,,ISO 2076:1989,Textiles — Man-made fibres — Generic names,Textiles — Fibres chimiques — Noms génériques,1989-11-23,3,"['01.040.59','59.060.20']",ISO/TC 38,9599,[6860],[2496
• ISO 2076:199924969,IS,,ISO 2076:1999,Textiles — Man-made fibres — Generic names,Textiles — Fibres chimiques — Noms génériques,1999-10-21,4,"['01.040.59','59.060.20']",ISO/TC 38/SC 23,9599,[6861
• ISO 2076:201050346,IS,,ISO 2076:2010,Textiles — Man-made fibres — Generic names,Textiles — Fibres chimiques — Noms génériques,2010-01-04,5,"['01.040.59','59.060.20']",ISO/TC 38,9599,[24969],[56
• ISO 2076:201356206,IS,,ISO 2076:2013,Textiles — Man-made fibres — Generic names,Textiles — Fibres chimiques — Noms génériques,2013-11-08,6,"['01.040.59','59.060.20']",ISO/TC 38,9599,[50346],[79
• ISO 2077:19796862,IS,,ISO 2077:1979,Pure expanded corkboard — Determination of the modulus of rupture by bending,Agglomérés expansés purs de liège — Détermination de la tension de rupture par f
• ISO 2078:19786863,IS,,ISO 2078:1978,Textile glass yarns — Designation,Fils de verre textile — Désignation,1978-10-01,3,['59.100.10'],ISO/TC 61,9599,,"[6864,6865]","['en','fr']",3
• ISO 2078:19856864,IS,,ISO 2078:1985,Textile glass — Yarns — Designation,Verre textile — Fils — Désignation,1985-09-05,4,['59.100.10'],ISO/TC 61/SC 13,9599,[6863],[6865],"['en','fr']",4
• ISO 2078:19936865,IS,,ISO 2078:1993,Textile glass — Yarns — Designation,Verre textile — Fils — Désignation,1993-01-27,5,['59.100.10'],ISO/TC 61/SC 13,9599,"[6864,6863]",[80368],"['en','fr']",4
• ISO 2078:1993/Amd 1:201566694,IS,Amd,ISO 2078:1993/Amd 1:2015,Textile glass — Yarns — Designation — Amendment 1,Verre textile — Fils — Désignation — Amendement 1,2015-11-13,5,['59.100.10'],ISO/TC 61/SC 13
• ISO 2079:19816866,IS,,ISO 2079:1981,Surface treatment and metallic coatings — General classification of terms,Traitements de surface et revêtements métalliques — Classification générale des ter
• ISO 2080:19816867,IS,,ISO 2080:1981,Electroplating and related processes — Vocabulary,Dépôts électrolytiques et opérations s'y rattachant — Vocabulaire,1981-11-01,2,"['25.220.40','01.040.25']",
• ISO 2080:200845351,IS,,ISO 2080:2008,"Metallic and other inorganic coatings — Surface treatment, metallic and other inorganic coatings — Vocabulary","Revêtements métalliques et autres revêtemen
• ISO 2081:19736868,IS,,ISO 2081:1973,Metallic coatings — Electroplated coatings of zinc on iron or steel,Revêtements métalliques — Dépôts électrolytiques de zinc sur fer ou acier,1973-07-01,1,['
• ISO 2081:19866869,IS,,ISO 2081:1986,Metallic coatings — Electroplated coatings of zinc on iron or steel,Revêtements métalliques — Dépôts électrolytiques de zinc sur fer ou acier,1986-09-04,2,['
• ISO 2081:200844331,IS,,ISO 2081:2008,Metallic and other inorganic coatings — Electroplated coatings of zinc with supplementary treatments on iron or steel,Revêtements métalliques et autres revê
• ISO 2081:201866374,IS,,ISO 2081:2018,Metallic and other inorganic coatings — Electroplated coatings of zinc with supplementary treatments on iron or steel,Revêtements métalliques et autres revê
• ISO 2082:19736870,IS,,ISO 2082:1973,Metallic coatings — Electroplated coatings of cadmium on iron or steel,Revêtements métalliques — Dépôts électrolytiques de cadmium sur fer ou acier,1973-09-0
• ISO 2082:19866871,IS,,ISO 2082:1986,Metallic coatings — Electroplated coatings of cadmium on iron or steel,Revêtements métalliques — Dépôts électrolytiques de cadmium sur fer ou acier,1986-09-0
• ISO 2082:200844330,IS,,ISO 2082:2008,Metallic and other inorganic coatings — Electroplated coatings of cadmium with supplementary treatments on iron or steel,Revêtements métalliques et autres r
• ISO 2084:19746873,IS,,ISO 2084:1974,Pipeline flanges for general use — Metric series — Mating dimensions,Brides de tuyauteries à usage général — Série métrique — Dimensions de raccordement,1974
• ISO 2085:19766874,IS,,ISO 2085:1976,Anodizing of aluminium and its alloys — Check of continuity of thin anodic oxide coatings — Copper sulphate test,Anodisation de l'aluminium et de ses alliage
• ISO 2085:201051481,IS,,ISO 2085:2010,Anodizing of aluminium and its alloys — Check for continuity of thin anodic oxidation coatings — Copper sulfate test,Anodisation de l'aluminium et de ses al
• ISO 2093:19736879,IS,,ISO 2093:1973,Metallic coatings — Electroplated coatings of tin,Revêtements métalliques — Dépôts électrolytiques d'étain,1973-07-01,1,['25.220.40'],ISO/TC 107/SC 3,9599,,[
• ISO 2094:19736881,IS,,ISO 2094:1973,Textile floor coverings — Determination of thickness loss under dynamic loading,Revêtements de sol textiles — Détermination de la perte d'épaisseur sous char
• ISO 2094:19866882,IS,,ISO 2094:1986,Textile floor coverings — Determination of thickness loss under dynamic loading,Revêtements de sol textiles — Détermination de la perte d'épaisseur sous char
• ISO 2095:19776883,IS,,ISO 2095:1977,Textile floor coverings — Determination of mass of effective pile per unit area that can be shorn away from the substrate,Revêtements de sol textiles — Déter
• ISO 2100:19726888,IS,,ISO 2100:1972,Tests for aircraft electrical plug and socket connectors,Essais des connecteurs électriques pour aéronefs,1972-12-01,1,['49.060'],ISO/TC 20/SC 1,9599,,[6889]
• ISO 2106:19826894,IS,,ISO 2106:1982,Anodizing of aluminium and its alloys — Determination of mass per unit area (surface density) of anodic oxide coatings — Gravimetric method,Anodisation de l'
• ISO 2106:1982/Amd 1:19836895,IS,Amd,ISO 2106:1982/Amd 1:1983,Anodizing of aluminium and its alloys — Determination of mass per unit area (surface density) of anodic oxide coatings — Gravimetric method — A
• ISO 2106:201151483,IS,,ISO 2106:2011,Anodizing of aluminium and its alloys — Determination of mass per unit area (surface density) of anodic oxidation coatings — Gravimetric method,Anodisation
• ISO 2107:19836896,IS,,ISO 2107:1983,"Aluminium, magnesium and their alloys — Temper designations","Aluminium, magnésium et leurs alliages — Désignation des états",1983-06-01,1,"['25.200','77.12
• ISO 2107:200432984,IS,,ISO 2107:2004,Aluminium and aluminium alloys — Wrought products — Temper designations,Aluminium et alliages d'aluminium — Produits corroyés — Désignation des états métall
• ISO 2107:200743401,IS,,ISO 2107:2007,Aluminium and aluminium alloys — Wrought products — Temper designations,Aluminium et alliages d'aluminium — Produits corroyés — Désignation des états métall
• ISO 2108:19786897,IS,,ISO 2108:1978,Documentation — International standard book numbering (ISBN),Documentation — Système international pour la numérotation des livres (ISBN),1978-11-01,2,['01.1
• ISO 2108:19926898,IS,,ISO 2108:1992,Information and documentation — International standard book numbering (ISBN),Information et documentation — Système international pour la numérotation des li
• ISO 2108:200536563,IS,,ISO 2108:2005,Information and documentation — International standard book number (ISBN),Information et documentation — Numéro international normalisé du livre (ISBN),2005
• ISO 2110:19806900,IS,,ISO 2110:1980,Data communication — 25- pin DTE/DCE interface connector and pin assignments,Téléinformatique — Affectation des broches et description du connecteur 25 broch
• ISO 2111:19726903,IS,,ISO 2111:1972,Data communication — Basic mode control procedures — Code independent information transfer,Téléinformatique — Procédures de commande en mode de base — Transf
• ISO 2112:19776905,IS,,ISO 2112:1977,Plastics — Aminoplastic moulding materials — Specification,Plastiques — Matières à mouler aminoplastes — Spécification,1977-07-01,1,['83.080.10'],ISO/TC 61/S
• ISO 2112:19906906,IS,,ISO 2112:1990,Plastics — Aminoplastic moulding materials — Specification,Plastiques — Matières à mouler aminoplastes — Spécification,1990-09-13,2,['83.080.10'],ISO/TC 61/S
• ISO 2113:19816907,IS,,ISO 2113:1981,Textile glass — Woven fabrics — Basis for specification,Verre textile — Tissus — Base de spécification,1981-04-01,1,['59.100.10'],ISO/TC 61/SC 13,9599,,[2520
• ISO 2113:199625209,IS,,ISO 2113:1996,Reinforcement fibres — Woven fabrics — Basis for a specification,Renforts — Tissus — Base de spécification,1996-05-23,2,['59.100.01'],ISO/TC 61/SC 13,9599,[
• ISO 2113:1996/Cor 1:200337858,IS,Cor,ISO 2113:1996/Cor 1:2003,Reinforcement fibres — Woven fabrics — Basis for a specification — Technical Corrigendum 1,Renforts — Tissus — Base de spécification — Rectifi
• ISO 2114:19746908,IS,,ISO 2114:1974,Plastics — Unsaturated polyester resins — Determination of acid value,Matières plastiques — Résines de polyesters non saturés — Détermination de l'indice d'a
• ISO 2114:19966909,IS,,ISO 2114:1996,Plastics — Unsaturated polyester resins — Determination of partial acid value and total acid value,Plastiques — Résines de polyesters non saturés — Détermina
• ISO 2115:19766911,IS,,ISO 2115:1976,Plastics — Aqueous dispersions of polymers and copolymers — Determination of white point temperature and minimum film-forming temperature,Matières plastiques
• ISO 2119:19726912,IS,,ISO 2119:1972,Magnesium-zinc-zirconium alloy castings — Chemical composition,Pièces moulées en alliages magnésium-zinc- zirconium — Composition chimique,1972-02-01,1,"['77
• ISO 2125:19756918,IS,,ISO 2125:1975,Withdrawal of ISO 2125-1975,Annulation de l'ISO 2125-1975,1975-10-01,1,['53.040.01'],ISO/TC 101,9599,,[13741],"['en','fr']",2
• ISO 2126:19756919,IS,,ISO 2126:1975,Office machines — Basic arrangement for the alphanumeric section of keyboards operated with both hands,Machines de bureau — Disposition de base pour la secti
• ISO 2128:19766920,IS,,ISO 2128:1976,Anodizing of aluminium and its alloys — Determination of thickness of anodic oxide coatings — Non-destructive measurement by split-beam microscope,"Anodisati
• ISO 2135:19766925,IS,,ISO 2135:1976,Anodizing of aluminium and its alloys — Accelerated test of lightfastness of coloured anodic oxide coatings,Anodisation de l'aluminium et de ses alliages — E
• ISO 2135:19846926,IS,,ISO 2135:1984,Anodizing of aluminium and its alloys — Accelerated test of light fastness of coloured anodic oxide coatings using artificial light,Anodisation de l'aluminiu
• ISO 2135:201051485,IS,,ISO 2135:2010,Anodizing of aluminium and its alloys — Accelerated test of light fastness of coloured anodic oxidation coatings using artificial light,Anodisation de l'alu
• ISO 2135:201770149,IS,,ISO 2135:2017,Anodizing of aluminium and its alloys — Accelerated test of light fastness of coloured anodic oxidation coatings using artificial light,Anodisation de l'alu
• ISO 2137:19726928,IS,,ISO 2137:1972,Petroleum products — Lubricating grease — Determination of cone penetration,Produits pétroliers — Graisses lubrifiantes — Détermination de la pénétrabilité a
• ISO 2137:19856929,IS,,ISO 2137:1985,Petroleum products — Lubricating grease and petrolatum — Determination of cone penetration,Produits pétroliers — Graisse lubrifiante et pétrolatum — Détermin
• ISO 2137:200745650,IS,,ISO 2137:2007,Petroleum products and lubricants — Determination of cone penetration of lubricating greases and petrolatum,Produits pétroliers et lubrifiants — Déterminati
• ISO 2143:19816934,IS,,ISO 2143:1981,Anodizing of aluminium and its alloys — Estimation of loss of absorptive power of anodic oxide coatings after sealing — Dye spot test with prior acid treatme
• ISO 2143:201051486,IS,,ISO 2143:2010,Anodizing of aluminium and its alloys — Estimation of loss of absorptive power of anodic oxidation coatings after sealing — Dye-spot test with prior acid tr
• ISO 2144:19836935,IS,,ISO 2144:1983,Paper and board — Determination of ash,Papiers et cartons — Détermination des cendres,1983-05-01,2,['85.060'],ISO/TC 6/SC 2,9599,,[6936],"['en','fr']",3
• ISO 2144:19876936,IS,,ISO 2144:1987,Paper and board — Determination of ash,Papiers et cartons — Détermination des cendres,1987-12-10,3,['85.060'],ISO/TC 6/SC 2,9599,[6935],[25911],"['en','fr']"
• ISO 2144:199725911,IS,,ISO 2144:1997,"Paper, board and pulps — Determination of residue (ash) on ignition at 900 degrees C","Papiers, cartons et pâtes — Détermination du résidu (cendres) après
• ISO 2144:201566536,IS,,ISO 2144:2015,"Paper, board and pulps — Determination of residue (ash) on ignition at 900 degrees C","Papiers, cartons et pâtes — Détermination du résidu (cendres) après
• ISO 2146:19726938,IS,,ISO 2146:1972,"Directories of libraries, information and documentation centres","Répertoires de bibliothèques, de centres d'information et de documentation",1972-01-01,1,[
• ISO 2146:19886939,IS,,ISO 2146:1988,"Documentation — Directories of libraries, archives, information and documentation centres, and their data bases","Documentation — Répertoires de bibliothèqu
• ISO 2149:19756942,IS,,ISO 2149:1975,Withdrawal of ISO 2149-1975,Annulation de l'ISO 2149-1975,1975-10-01,1,['53.040.01'],ISO/TC 101,9599,,[13741],"['en','fr']",1
• ISO 2150:19756943,IS,,ISO 2150:1975,Withdrawal of ISO 2150-1975,Annulation de l'ISO 2150-1975,1975-10-01,1,['53.040.01'],ISO/TC 101,9599,,[13741],"['en','fr']",1
• ISO 2151:19726944,IS,,ISO 2151:1972,Measurement of airborne noise emitted by compressor/primemover-units intended for outdoor use,Mesure du bruit aérien émis par des groupes moto-compresseurs d
• ISO 2157:19726947,IS,,ISO 2157:1972,Dental burs and cutters — Nominal sizes and designation of working parts,"Fraises et instruments de coupe, utilisés en art dentaire — Dimensions nominales et
• ISO 2157:19846948,IS,,ISO 2157:1984,Dental rotary instruments — Nominal sizes and designation,Instruments rotatifs dentaires — Dimensions nominales et désignation,1984-08-01,2,['11.060.20'],ISO
• ISO 2157:19926949,IS,,ISO 2157:1992,Dental rotary instruments — Nominal diameters and designation code number,Instruments rotatifs dentaires — Diamètres nominaux et désignation par numéro de co
• ISO 2160:19726950,IS,,ISO 2160:1972,Petroleum products — Corrosiveness to copper — Copper strip test,Produits pétroliers — Action corrosive sur le cuivre — Essai à la lame de cuivre,1972-11-01,
• ISO 2160:19856951,IS,,ISO 2160:1985,Petroleum products — Corrosiveness to copper — Copper strip test,Produits pétroliers — Action corrosive sur le cuivre — Essai à la lame de cuivre,1985-02-14,
• ISO 2160:1985/Cor 1:199322732,IS,Cor,ISO 2160:1985/Cor 1:1993,Petroleum products — Corrosiveness to copper — Copper strip test — Technical Corrigendum 1,Produits pétroliers — Action corrosive sur le cuivr
• ISO 2162-3:19936955,IS,,ISO 2162-3:1993,Technical product documentation — Springs — Part 3: Vocabulary,Documentation technique de produits — Ressorts — Partie 3: Vocabulaire,1993-11-25,1,"['21.16
• ISO 2162:19736952,IS,,ISO 2162:1973,Technical drawings — Representation of springs,Dessins techniques — Représentation des ressorts,1973-03-01,1,"['21.160','01.100.20']",ISO/TC 10,9599,,[6953],
• ISO 2163:19756956,IS,,ISO 2163:1975,Industrial trucks — Wheels and castors — Vocabulary,Chariots de manutention — Roues et roulettes — Vocabulaire,1975-07-01,1,"['01.040.53','53.060']",ISO/TC 1
• ISO 2167:19816961,IS,,ISO 2167:1981,Round-headed cabbage — Guide to storage,Choux pommés — Guide pour l'entreposage,1981-10-01,2,['67.080.20'],ISO/TC 34,9599,,[6962],"['en','fr']",3
• ISO 2170:19806965,IS,,ISO 2170:1980,Cereals and pulses — Sampling of milled products,Céréales et légumineuses — Échantillonnage des produits de mouture,1980-02-01,2,['67.060'],ISO/TC 34/SC 4,95
• ISO 2171:19806967,IS,,ISO 2171:1980,"Cereals, pulses and derived products — Determination of ash","Céréales, légumineuses et produits dérivés — Détermination des cendres",1980-05-01,2,['67.060'
• ISO 2171:19936968,IS,,ISO 2171:1993,Cereals and milled cereal products — Determination of total ash,Céréales et produits de mouture des céréales — Dosage des cendres totales,1993-06-17,3,['67.0
• ISO 2171:200737264,IS,,ISO 2171:2007,"Cereals, pulses and by-products — Determination of ash yield by incineration","Céréales, légumineuses et produits dérivés — Dosage du taux de cendres par i
• ISO 2173:19786970,IS,,ISO 2173:1978,Fruit and vegetable products — Determination of soluble solids content — Refractometric method,Produits dérivés des fruits et légumes — Détermination du rési
• ISO 2174:19796971,IS,,ISO 2174:1979,Surface active agents — Preparation of water with known calcium hardness,Agents de surface — Préparation d'une eau de dureté calcique déterminée,1979-11-01,2
• ISO 2175:19816973,IS,,ISO 2175:1981,Industrial wheels for non-powered equipment — Dimensions and nominal load capacities,Roues de manutention pour engins de manutention non automoteurs — Dimens
• ISO 2176:19726974,IS,,ISO 2176:1972,Petroleum products — Lubricating grease — Determination of dropping point,Produits pétroliers — Graisses lubrifiantes — Détermination du point de goutte,1972
• ISO 2177:19726976,IS,,ISO 2177:1972,Metallic coatings — Measurement of coating thickness — Coulometric method by anodic dissolution,Revêtements métalliques — Mesurage de l'épaisseur — Méthode c
• ISO 2177:19856977,IS,,ISO 2177:1985,Metallic coatings — Measurement of coating thickness — Coulometric method by anodic dissolution,Revêtements métalliques — Mesurage de l'épaisseur — Méthode c
• ISO 2178:19826979,IS,,ISO 2178:1982,Non-magnetic coatings on magnetic substrates — Measurement of coating thickness — Magnetic method,Revêtements métalliques non magnétiques sur métal de base m
• ISO 2179:19726980,IS,,ISO 2179:1972,Electroplated coatings of tin-nickel alloy,Dépôts électrolytiques d'alliages étain-nickel,1972-06-01,1,['25.220.40'],ISO/TC 107/SC 3,9599,,[6981],"['en','fr'
• ISO 2184-1:19726982,IS,,ISO 2184-1:1972,Industrial castors — Dimensions of top plates — Part 1: Oblong top-plates with 4 bolt holes,Roulettes de manutention — Dimensions des platines — Partie 1:
• ISO 2186:19736984,IS,,ISO 2186:1973,Fluid flow in closed conduits — Connections for pressure signal transmissions between primary and secondary elements,Débit des fluides dans les conduites fer
• ISO 2187:19766985,IS,,ISO 2187:1976,"Textile machinery and accessories — Spinning preparatory machinery, spinning and doubling (twisting) machinery — Terminology","Matériel pour l'industrie tex
• ISO 2189:19726987,IS,,ISO 2189:1972,Cork — Expanded pure agglomerated cork — Determination of bulk density,Liège — Agglomérés expansés purs — Détermination de la masse volumique,1972-04-01,1,['
• ISO 2189:19866988,IS,,ISO 2189:1986,Expanded pure agglomerated cork — Determination of bulk density,Agglomérés expansés purs de liège — Détermination de la masse volumique apparente,1986-11-13,
• ISO 2190:19726989,IS,,ISO 2190:1972,Cork — Granulated cork — Determination of moisture content,Liège — Granulés crus — Détermination de l'humidité,1972-03-01,1,['79.100'],ISO/TC 87,9599,,[6990]
• ISO 2190:19886990,IS,,ISO 2190:1988,Granulated cork — Determination of moisture content,Granulés crus de liège — Détermination de l'humidité,1988-11-03,2,['79.100'],ISO/TC 87,9599,[6989],[23236
• ISO 2190:199823236,IS,,ISO 2190:1998,Granulated cork — Determination of moisture content,Granulés crus de liège — Détermination de l'humidité,1998-10-01,3,['79.100'],ISO/TC 87,9599,[6990],"[697
• ISO 2191:19726991,IS,,ISO 2191:1972,Cork — Expanded pure agglomerated — Deformation under constant pressure,Liège — Agglomérés expansés purs — Déformation sous pression constante,1972-07-01,1,[
• ISO 2194:19726994,IS,,ISO 2194:1972,Wire screens and plate screens for industrial purposes — Nominal sizes of apertures,Toiles et feuilles ou plaques perforées pour tamisage industriel — Dimens
• ISO 2196:19756997,IS,,ISO 2196:1975,Withdrawal of ISO 2196-1975,Annulation de l'ISO 2196-1975,1975-10-01,1,['53.040.01'],ISO/TC 101,9599,,[13741],"['en','fr']",2
• ISO 2206-1:19727009,IS,,ISO 2206-1:1972,"Packaging — Complete, filled transport packages — Part 1: Identification of parts when testing",Emballages — Emballages d'expédition complets et pleins —
• ISO 2219:19727023,IS,,ISO 2219:1972,"Cork — Expanded pure agglomerated thermal cork — Characteristics, sampling and packing","Liège — Agglomérés expansés purs thermiques — Caractéristiques, éch
• ISO 2219:19897024,IS,,ISO 2219:1989,"Expanded pure agglomerated cork for thermal insulation — Characteristics, sampling and packaging","Agglomérés expansés purs de liège pour isolation thermiqu
• ISO 2220:19727025,IS,,ISO 2220:1972,Hand finishing sticks and oil stones — Dimensions,Bâtons d'affûtage à la main et pierres à huile — Dimensions,1972-02-01,1,['25.100.70'],ISO/TC 29/SC 5,9599,
• ISO 2229:19737034,IS,,ISO 2229:1973,"Equipment for the petroleum and natural gas industries — Steel pipe flanges, nominal sizes 1/2 to 24 in — Metric dimensions",Matériel d'équipement pour les
• ISO 2230:19737035,IS,,ISO 2230:1973,Vulcanized rubber — Guide to storage,Élastomères vulcanisés — Guide pour le stockage,1973-12-01,1,['83.060'],ISO/TC 45/SC 4,9599,,[35946],"['en','fr']",2
• ISO 2230:200235946,IS,,ISO 2230:2002,Rubber products — Guidelines for storage,Produits à base d'élastomères — Lignes directrices pour le stockage,2002-04-25,2,['83.060'],ISO/TC 45/SC 4,9599,[70
• ISO 2231:19737036,IS,,ISO 2231:1973,Fabric coated with rubber or plastics — Standard atmospheres for conditioning and testing,Supports textiles revêtus d'élastomères ou de plastiques — Atmosphè
• ISO 2232:19737038,IS,,ISO 2232:1973,Drawn wire for general purpose non-alloy steel wire ropes — Specifications,Fils tréfilés pour câbles d'usages courants en acier non allié — Spécifications,19
• ISO 2232:19907039,IS,,ISO 2232:1990,Round drawn wire for general purpose non-alloy steel wire ropes and for large diameter steel wire ropes — Specifications,Fils tréfilés ronds pour câbles d'us
• ISO 2233-1:19727040,IS,,ISO 2233-1:1972,"Packaging — Complete, filled transport packages — Part 1: Conditioning for testing",Emballages — Emballages d'expédition complets et pleins — Partie 1: Co
• ISO 2233:19867041,IS,,ISO 2233:1986,"Packaging — Complete, filled transport packages — Conditioning for testing",Emballages — Emballages d'expédition complets et pleins — Conditionnement en vue
• ISO 2233:199421511,IS,,ISO 2233:1994,"Packaging — Complete, filled transport packages — Conditioning for testing",Emballages — Emballages d'expédition complets et pleins — Conditionnement en vu
• ISO 2234-1:19727042,IS,,ISO 2234-1:1972,"Packaging — Complete, filled transport packages — Part 1: Stacking test",Emballages — Emballages d'expédition complets et pleins — Partie 1: Essai de gerb
• ISO 2234:19857043,IS,,ISO 2234:1985,"Packaging — Complete, filled transport packages — Stacking tests using static load",Emballages — Emballages d'expédition complets et pleins — Essai de gerba
• ISO 2235:19817044,IS,,ISO 2235:1981,"Abrasive sheets — Designation, dimensions and tolerances","Feuilles abrasives — Désignation, dimensions et tolérances",1981-07-01,2,['25.100.70'],ISO/TC 29/
• ISO 2235:199320749,IS,,ISO 2235:1993,"Abrasive sheets — Dimensions, tolerances and designation","Feuilles abrasives — Dimensions, tolérances et désignation",1993-07-22,3,['25.100.70'],ISO/TC 29
• ISO 2236:19827045,IS,,ISO 2236:1982,Assembly tools for screws and nuts — Forged and tubular socket wrenches — Maximum outside head dimensions,Outils de manoeuvre pour vis et écrous — Clés à béq
• ISO 2238:19727047,IS,,ISO 2238:1972,Machine bridge reamers,"Alésoirs de chaudronnerie, à machine",1972-05-01,1,['25.100.30'],ISO/TC 29/SC 9,9599,,[50890],"['en','fr']",4
• ISO 2238:201150890,IS,,ISO 2238:2011,Machine bridge reamers,"Alésoirs de chaudronnerie, à machine",2011-08-05,2,['25.100.30'],ISO/TC 29/SC 9,9599,[7047],[75803],"['en','fr']",5
• ISO 2239:19727048,IS,,ISO 2239:1972,Photography — Light sources for use in sensitometric exposure — Simulation of the spectral distribution of daylight,Photographie — Sources de lumière destiné
• ISO 2240:19827049,IS,,ISO 2240:1982,Photography — Colour reversal camera films — Determination of ISO speed,Photographie — Films de prise de vues inversibles en couleur — Détermination de la se
• ISO 2240:19947050,IS,,ISO 2240:1994,Photography — Colour reversal camera films — Determination of ISO speed,Photographie — Films de prise de vue inversibles en couleur — Détermination de la sen
• ISO 2241:19727051,IS,,ISO 2241:1972,Photography — Light sources for use in sensitometric exposure — Simulation of the spectral distribution of tungsten illumination,Photographie — Sources de lu
• ISO 2242:19727052,IS,,ISO 2242:1972,Photography — Light sources for use in sensitometric exposure — Simulation of the spectral distribution of photoflood illumination,Photographie — Sources de
• ISO 2244-1:19727054,IS,,ISO 2244-1:1972,"Packaging — Complete, filled transport packages — Part 1: Horizontal impact tests (Inclined plane test, pendulum test)","Emballages — Emballages d'expédit
• ISO 2244:19857055,IS,,ISO 2244:1985,"Packaging — Complete, filled transport packages — Horizontal impact tests (horizontal or inclined plane test; pendulum test)",Emballages — Emballages d'expé
• ISO 2245:19727056,IS,,ISO 2245:1972,Shaped insulating refractory products — Classification,Produits réfractaires isolants façonnés — Classification,1972-06-01,1,['81.080'],ISO/TC 33,9599,,[7057
• ISO 2245:19907057,IS,,ISO 2245:1990,Shaped insulating refractory products — Classification,Produits réfractaires isolants façonnés — Classification,1990-12-06,2,['81.080'],ISO/TC 33,9599,[7056]
• ISO 2247-1:19727059,IS,,ISO 2247-1:1972,"Packaging — Complete, filled transport packages — Part 1: Vibration test",Emballages — Emballages d'expédition complets et pleins — Partie 1: Essai de vib
• ISO 2247:19857060,IS,,ISO 2247:1985,"Packaging — Complete, filled transport packages — Vibration test at fixed low frequency",Emballages — Emballages d'expédition complets et pleins — Essai de
• ISO 2248-1:19727061,IS,,ISO 2248-1:1972,"Packaging — Complete, filled transport packages — Part 1: Vertical impact test by dropping",Emballages — Emballages d'expédition complets et pleins — Part
• ISO 2250:19727064,IS,,ISO 2250:1972,"Finishing reamers for morse and metric tapers, with parallel shanks and morse taper shanks","Alésoirs de finition pour cônes Morse et métrique, à queue cyli
• ISO 2250:200950891,IS,,ISO 2250:2009,"Finishing reamers for Morse and metric tapers, with cylindrical shanks and Morse taper shanks","Alésoirs de finition pour cônes Morse et métrique, à queue
• ISO 2251:19757065,IS,,ISO 2251:1975,Lined antistatic rubber footwear,"Articles chaussants doublés, en caoutchouc anti-électrostatique",1975-07-01,1,['13.340.50'],ISO/TC 94/SC 3,9599,,[7066],"['
• ISO 2253:19747068,IS,,ISO 2253:1974,Spices and condiments — Curry powder — Specification,Épices — Poudre de carry — Spécifications,1974-02-01,1,['67.220.10'],ISO/TC 34/SC 7,9599,,[7069],"['en',
• ISO 2253:19867069,IS,,ISO 2253:1986,Curry powder — Specification,Poudre de carry — Spécifications,1986-03-06,2,['67.220.10'],ISO/TC 34/SC 7,9599,[7068],[22117],"['en','fr']",3
• ISO 2254:19807070,IS,,ISO 2254:1980,"Cloves, whole and ground (powdered) — Specification",Clous de girofle entiers et clous de girofle en poudre — Spécifications,1980-06-01,1,['67.220.10'],ISO/
• ISO 2255:19807071,IS,,ISO 2255:1980,"Coriander, whole or ground (Powdered) — Specification",Coriandre entière et coriandre en poudre — Spécifications,1980-09-01,1,['67.220.10'],ISO/TC 34/SC 7,9
• ISO 2261:19727077,IS,,ISO 2261:1972,Reciprocating internal combustion engines — Hand operated control devices — Standard direction of motion,Moteurs alternatifs à combustion interne — Dispositi
• ISO 2262:19727078,IS,,ISO 2262:1972,Rope thimbles,Cosses de câbles,1972-03-01,1,['53.020.30'],ISO/TC 111,9599,,[7079],"['en','fr']",4
• ISO 2264:19727081,IS,,ISO 2264:1972,Rolling bearings — Bearings with spherical outside surface and extended inner ring width,Roulements — Roulements à surface extérieure sphérique et à bague in
• ISO 2266:19747084,IS,,ISO 2266:1974,Textile machinery and accessories — Metal travellers for spinning and twisting,Matériel pour l'industrie textile — Curseurs métalliques pour anneaux de conti
• ISO 2267:19797085,IS,,ISO 2267:1979,Surface active agents — Evaluation of certain effects of laundering — Methods of preparation and use of unsoiled cotton control cloth,Agents de surface — Con
• ISO 2269:19737089,IS,,ISO 2269:1973,Magnetic compasses and accessories — Rules for testing and certification,Compas magnétiques et leurs accessoires — Règles pour l'essai et la certification,19
• ISO 2269:19927090,IS,,ISO 2269:1992,"Shipbuilding — Class A magnetic compasses, azimuth reading devices and binnacles — Tests and certification","Construction navale — Compas magnétiques, alida
• ISO 2270:19727091,IS,,ISO 2270:1972,Surface active agents — Ethylene oxide adducts — Iodometric determination of oxyethylene groups,Agents de surface — Dérivés polyéthylènes — Dosage iodométriq
• ISO 2271:19727093,IS,,ISO 2271:1972,Surface active agents — Detergents — Determination of anionic-active matter (Direct two-phase titration procedure),Agents de surface — Détergents — Détermina
• ISO 2272:19727095,IS,,ISO 2272:1972,Surface active agents — Analysis of soaps — Determination of low contents of free glycerol spectrophotometric method,Agents de surface — Analyse des savons —
• ISO 2276:19727097,IS,,ISO 2276:1972,Reciprocating internal combustion engines — Definition of right-hand and left-hand single bank engines,Moteurs alternatifs à combustion interne — Définition
• ISO 2281:19847099,IS,,ISO 2281:1984,Horology — Water-resistant watches,Horlogerie — Montres étanches,1984-07-01,2,['39.040.10'],ISO/TC 114/SC 3,9599,,[7100],"['en','fr']",3
• ISO 2281:19907100,IS,,ISO 2281:1990,Horology — Water-resistant watches,Horlogerie — Montres étanches,1990-04-05,3,['39.040.10'],ISO/TC 114/SC 3,9599,[7099],[45334],"['en','fr']",3
• ISO 2283:19727101,IS,,ISO 2283:1972,Long shank machine taps with nominal diameters from 3 to 24 mm and 1/8 to 1 in,"Tarauds à machine, à queue longue, de diamètre nominal 3 à 24 mm et 1/8 à 1 i
• ISO 2283:1972/Amd 1:19777102,IS,Amd,ISO 2283:1972/Amd 1:1977,Long shank machine taps with nominal diameters from 3 to 24 mm and 1/8 to 1 in — Amendment 1,"Tarauds à machine, à queue longue, de diamètre no
• ISO 2284:19767103,IS,,ISO 2284:1976,Hand taps for pipe threads for parallel and taper threads — General dimensions and marking,Tarauds à main au pas du gaz pour filetages cylindrique et conique
• ISO 2284:19877104,IS,,ISO 2284:1987,Hand taps for parallel and taper pipe threads — General dimensions and marking,Tarauds à main pour filetages cylindrique et conique de tuyauterie — Dimension
• ISO 2285:19817105,IS,,ISO 2285:1981,"Rubber, vulcanized — Determination of tension set at normal and high temperatures",Caoutchouc vulcanisé — Détermination de la déformation rémanente aux temp
• ISO 2285:19887106,IS,,ISO 2285:1988,"Rubber, vulcanized or thermoplastic — Determination of tension set at normal and high temperatures",Caoutchouc vulcanisé ou thermoplastique — Détermination
• ISO 2285:199723839,IS,,ISO 2285:1997,"Rubber, vulcanized or thermoplastic — Determination of tension set at normal and high temperatures",Caoutchouc vulcanisé ou thermoplastique — Détermination
• ISO 2285:200133673,IS,,ISO 2285:2001,"Rubber, vulcanized or thermoplastic — Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensi
• ISO 2285:200745387,IS,,ISO 2285:2007,"Rubber, vulcanized or thermoplastic — Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensi
• ISO 2285:201357737,IS,,ISO 2285:2013,"Rubber, vulcanized or thermoplastic — Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensi
• ISO 2286-1:199820149,IS,,ISO 2286-1:1998,"Rubber- or plastics-coated fabrics — Determination of roll characteristics — Part 1: Methods for determination of length, width and net mass","Supports t
• ISO 2286-2:199825482,IS,,ISO 2286-2:1998,"Rubber- or plastics-coated fabrics — Determination of roll characteristics — Part 2: Methods for determination of total mass per unit area, mass per unit
• ISO 2286-3:199825483,IS,,ISO 2286-3:1998,Rubber- or plastics-coated fabrics — Determination of roll characteristics — Part 3: Method for determination of thickness,Supports textiles revêtus de ca
• ISO 2286:19727107,IS,,ISO 2286:1972,Fabrics coated with rubber or plastics — Determination of roll characteristics,Supports textiles revêtus d'élastomères ou de plastiques — Détermination des c
• ISO 2286:19867108,IS,,ISO 2286:1986,Rubber- or plastics-coated fabrics — Determination of roll characteristics,Supports textiles revêtus de caoutchouc ou de plastique — Détermination des caract
• ISO 2288:19797109,IS,,ISO 2288:1979,Agricultural tractors and machines — Engine test code (bench test) — Net power,Tracteurs et machines agricoles — Code d'essai des moteurs (essai au banc) — P
• ISO 2288:1979/Amd 1:19837111,IS,Amd,ISO 2288:1979/Amd 1:1983,Agricultural tractors and machines — Engine test code (bench test) — Net power — Amendment 1,Tracteurs et machines agricoles — Code d'essai des
• ISO 2288:19897110,IS,,ISO 2288:1989,Agricultural tractors and machines — Engine test code (bench test) — Net power,Tracteurs et machines agricoles — Code d'essai des moteurs (essai au banc) — P
• ISO 2291:19807114,IS,,ISO 2291:1980,Cocoa beans — Determination of moisture content (Routine method),Fèves de cacao — Détermination de la teneur en eau (Méthode pratique),1980-12-01,2,['67.140.
• ISO 2292:19737116,IS,,ISO 2292:1973,Cocoa beans — Sampling,Fèves de cacao — Échantillonnage,1973-02-01,1,['67.140.30'],ISO/TC 34/SC 18,9599,,"[68203,7117]","['en','fr']",5
• ISO 2293:19767118,IS,,ISO 2293:1976,Meat and meat products — Aerobic count at 30 degrees C (Reference method),Viandes et produits à base de viande — Dénombrement des germes aérobies à 30 degrés
• ISO 2294:19747120,IS,,ISO 2294:1974,Meat and meat products — Determination of total phosphorus content (Reference method),Viandes et produits à base de viande — Détermination de la teneur en ph
• ISO 2296:19727123,IS,,ISO 2296:1972,Metal slitting saws with fine and coarse teeth — Metric series,Fraises-scies à dentures fine et grosse — Série métrique,1972-07-01,1,['25.100.40'],ISO/TC 29/
• ISO 2296:201150892,IS,,ISO 2296:2011,Metal slitting saws with fine and coarse teeth — Metric series,Fraises-scies à dentures fine et grosse — Série métrique,2011-09-26,2,['25.100.40'],ISO/TC 29
• ISO 2302:19787129,IS,,ISO 2302:1978,"Rubber, isobutene-isoprene (IIR) — Evaluation procedures",Caoutchouc isobutène-isoprène (IIR) — Méthodes d'évaluation,1978-11-01,2,['83.060'],ISO/TC 45,9599
• ISO 2302:19857130,IS,,ISO 2302:1985,"Rubber, isobutene-isoprene (IIR) — Evaluation procedures",Caoutchouc isobutène-isoprène (IIR) — Méthodes d'évaluation,1985-05-09,3,['83.060'],ISO/TC 45/SC 3
• ISO 2302:19957131,IS,,ISO 2302:1995,Isobutene-isoprene rubber (IIR) — Evaluation procedures,Caoutchouc isobutène-isoprène (IIR) — Méthode d'évaluation,1995-12-21,4,['83.060'],ISO/TC 45/SC 3,959
• ISO 2302:200535177,IS,,ISO 2302:2005,Isobutene-isoprene rubber (IIR) — Evaluation procedures,Caoutchouc isobutène-isoprène (IIR) — Méthodes d'évaluation,2005-01-05,5,['83.060'],ISO/TC 45/SC 3,9
• ISO 2302:201465596,IS,,ISO 2302:2014,Isobutene-isoprene rubber (IIR) — Evaluation procedure,Caoutchouc isobutène-isoprène (IIR) — Méthode d'évaluation,2014-10-15,6,['83.060'],ISO/TC 45/SC 3,959
• ISO 2303:19837132,IS,,ISO 2303:1983,"Rubber, polyisoprene (IR) — Non-oil extended, solution-polymerized types — Test recipe and evaluation of vulcanization characteristics",Caoutchouc polyisopr
• ISO 2303:19907133,IS,,ISO 2303:1990,"Isoprene rubber (IR) — Non-oil-extended, solution-polymerized types — Evaluation procedure",Caoutchouc isoprène (IR) — Types polymérisés en solution et non
• ISO 2303:1990/Amd 1:19937134,IS,Amd,ISO 2303:1990/Amd 1:1993,"Isoprene rubber (IR) — Non-oil-extended, solution-polymerized types — Evaluation procedure — Amendment 1",Caoutchouc isoprène (IR) — Types pol

← records 2,001–2,400 · All of Withdrawn and superseded ISO standards · records 2,801 on →