Records 2,001–2,400 — Withdrawn and superseded ISO standards

Records 2,001 to 2,400 of 24,640. Each links to its own page, which carries the source URL and the quoted line that states the value.

• ISO 1496-3:19953047,IS,,ISO 1496-3:1995,"Series 1 freight containers — Specification and testing — Part 3: Tank containers for liquids, gases and pressurized dry bulk","Conteneurs de la série 1 —
• ISO 1496-3:1995/Amd 1:200640904,IS,Amd,ISO 1496-3:1995/Amd 1:2006,"Series 1 freight containers — Specification and testing — Part 3: Tank containers for liquids, gases and pressurized dry bulk — Amendment 1
• ISO 1496-4:19916082,IS,,ISO 1496-4:1991,Series 1 freight containers — Specification and testing — Part 4: Non-pressurized containers for dry bulk,Conteneurs de la série 1 — Spécifications et essa
• ISO 1496-4:1991/Amd 1:199422489,IS,Amd,ISO 1496-4:1991/Amd 1:1994,Series 1 freight containers — Specification and testing — Part 4: Non-pressurized containers for dry bulk — Amendment 1: 1AAA and 1BBB conta
• ISO 1496-4:1991/Cor 1:200643937,IS,Cor,ISO 1496-4:1991/Cor 1:2006,Series 1 freight containers — Specification and testing — Part 4: Non-pressurized containers for dry bulk — Technical Corrigendum 1,Conteneu
• ISO 1496-5:19776083,IS,,ISO 1496-5:1977,Series 1 freight containers — Specification and testing — Part 5: Platform (container),Conteneurs de la série 1 — Spécifications et essais — Partie 5: Cont
• ISO 1496-5:19916084,IS,,ISO 1496-5:1991,Series 1 freight containers — Specification and testing — Part 5: Platform and platform-based containers,Conteneurs de la série 1 — Spécifications et essai
• ISO 1496-5:1991/Amd 1:199320443,IS,Amd,ISO 1496-5:1991/Amd 1:1993,Series 1 freight containers — Specification and testing — Part 5: Platform and platform-based containers — Amendment 1: 1AAA and 1BBB contai
• ISO 1496-5:1991/Amd 2:199420444,IS,Amd,ISO 1496-5:1991/Amd 2:1994,Series 1 freight containers — Specification and testing — Part 5: Platform and platform-based containers — Amendment 2,Conteneurs de la séri
• ISO 1496-6C:19776088,IS,,ISO 1496-6C:1977,"Series 1 freight containers — Specification and testing — Part 6C: Platform based containers, open-sided, with complete superstructure","Conteneurs de la
• ISO 1496-7:19746086,IS,,ISO 1496-7:1974,Series 1 freight containers — Specification and testing — Part 7: Air mode containers,Conteneurs de la série 1 — Spécifications et essais — Partie 7: Conte
• ISO 1502:19786091,IS,,ISO 1502:1978,ISO general purpose metric screw threads — Gauging,Filetages métriques ISO pour usages généraux — Vérification par calibres à limites,1978-07-01,1,"['21.040.
• ISO 1503:19776093,IS,,ISO 1503:1977,Geometrical orientation and directions of movements,Orientation géométrique et sens de mouvement,1977-08-01,1,['13.180'],ISO/TC 159/SC 4,9599,,"[40302,24787]
• ISO 1505:19826094,IS,,ISO 1505:1982,Textile machinery and allied machinery and accessories — Dyeing and finishing equipment — Working widths and nominal widths,Matériel pour l'industrie textile
• ISO 1509:19736097,IS,,ISO 1509:1973,General purpose push-pull three-pole circuit-breakers for aircraft — Performance requirements,Disjoncteurs tripolaires à bouton-poussoir d'usage courant util
• ISO 1512:19746100,IS,,ISO 1512:1974,Paints and varnishes — Sampling,Peintures et vernis — Échantillonnage,1974-03-01,1,['87.040'],ISO/TC 35/SC 9,9599,,[6101],"['en','fr']",4
• ISO 1512:19916101,IS,,ISO 1512:1991,Paints and varnishes — Sampling of products in liquid or paste form,Peintures et vernis — Échantillonnage des produits sous forme liquide ou en pâte,1991-12-
• ISO 1513:19806102,IS,,ISO 1513:1980,Paints and varnishes — Examination and preparation of samples for testing,Peintures et vernis — Examen et préparation des échantillons pour essais,1980-06-01
• ISO 1513:19926103,IS,,ISO 1513:1992,Paints and varnishes — Examination and preparation of samples for testing,Peintures et vernis — Examen et préparation des échantillons pour essais,1992-12-03
• ISO 1513:1992/Cor 1:199423134,IS,Cor,ISO 1513:1992/Cor 1:1994,Paints and varnishes — Examination and preparation of samples for testing — Technical Corrigendum 1,Peintures et vernis — Examen et préparatio
• ISO 1514:19746104,IS,,ISO 1514:1974,Paints and varnishes — Standard panels for testing,Peintures et vernis — Panneaux normalisés pour essais,1974-05-01,1,['87.040'],ISO/TC 35,9599,,"[6105,6106]
• ISO 1514:19846105,IS,,ISO 1514:1984,Paints and varnishes — Standard panels for testing,Peintures et vernis — Panneaux normalisés pour essais,1984-10-01,2,['87.040'],ISO/TC 35/SC 9,9599,[6104],[
• ISO 1514:19936106,IS,,ISO 1514:1993,Paints and varnishes — Standard panels for testing,Peintures et vernis — Panneaux normalisés pour essais,1993-11-18,3,['87.040'],ISO/TC 35/SC 9,9599,"[6104,6
• ISO 1514:200430934,IS,,ISO 1514:2004,Paints and varnishes — Standard panels for testing,Peintures et vernis — Panneaux normalisés pour essais,2004-11-23,4,['87.040'],ISO/TC 35/SC 9,9599,[6106],
• ISO 1514:201662347,IS,,ISO 1514:2016,Paints and varnishes — Standard panels for testing,Peintures et vernis — Panneaux normalisés pour essai,2016-07-18,5,['87.040'],ISO/TC 35/SC 9,9599,[30934],
• ISO 1515:19736107,IS,,ISO 1515:1973,Paints and varnishes — Determination of volatile and non-volatile matter,Peintures et vernis — Détermination des matières volatiles et non volatiles,1973-12-
• ISO 1516:19816108,IS,,ISO 1516:1981,"Paints, varnishes, petroleum and related products — Flash/no flash test — Closed cup equilibrium method","Peintures, vernis, produits pétroliers et assimilé
• ISO 1517:19736109,IS,,ISO 1517:1973,Paints and varnishes — Surface-drying test — Ballotini method,Peintures et vernis — Détermination de la durée de séchage en surface — Méthode aux billes en v
• ISO 1518-1:201159590,IS,,ISO 1518-1:2011,Paints and varnishes — Determination of scratch resistance — Part 1: Constant-loading method,Peintures et vernis — Détermination de la résistance à la ray
• ISO 1518-1:201973853,IS,,ISO 1518-1:2019,Paints and varnishes — Determination of scratch resistance — Part 1: Constant-loading method,Peintures et vernis — Détermination de la résistance à la ray
• ISO 1518-2:201159596,IS,,ISO 1518-2:2011,Paints and varnishes — Determination of scratch resistance — Part 2: Variable-loading method,Peintures et vernis — Détermination de la résistance à la ray
• ISO 1518:19736110,IS,,ISO 1518:1973,Paints and varnishes — Scratch test,Peintures et vernis — Essai de rayure,1973-12-01,1,['87.040'],ISO/TC 35/SC 9,9599,,[6111],['en'],5
• ISO 1518:19926111,IS,,ISO 1518:1992,Paints and varnishes — Scratch test,Peintures et vernis — Essai de rayure,1992-03-19,2,['87.040'],ISO/TC 35/SC 9,9599,[6110],"[50483,59590]","['en','fr']",7
• ISO 1519:19736112,IS,,ISO 1519:1973,Paints and varnishes — Bend test (cylindrical mandrel),Peintures et vernis — Essai de pliage sur mandrin cylindrique,1973-12-01,1,['87.040'],ISO/TC 35/SC 9,9
• ISO 1519:200228226,IS,,ISO 1519:2002,Paints and varnishes — Bend test (cylindrical mandrel),Peintures et vernis — Essai de pliage sur mandrin cylindrique,2002-03-14,2,['87.040'],ISO/TC 35/SC 9,
• ISO 1520:19736113,IS,,ISO 1520:1973,Paints and varnishes — Cupping test,Peintures et vernis — Essai d'emboutissage,1973-12-01,1,['87.040'],ISO/TC 35/SC 9,9599,,[26621],"['en','fr']",3
• ISO 1520:199926621,IS,,ISO 1520:1999,Paints and varnishes — Cupping test,Peintures et vernis — Essai d'emboutissage,1999-02-04,2,['87.040'],ISO/TC 35/SC 9,9599,[6113],[40923],"['en','fr']",7
• ISO 1521:19736115,IS,,ISO 1521:1973,Paints and varnishes — Determination of resistance to water — Water immersion method,Peintures et vernis — Détermination de la résistance à l'eau — Méthode p
• ISO 1522:19736116,IS,,ISO 1522:1973,Paints and varnishes — Pendulum damping test,Peintures et vernis — Essai d'amortissement du pendule,1973-12-01,1,['87.040'],ISO/TC 35/SC 9,9599,,[24923],"['e
• ISO 1522:199824923,IS,,ISO 1522:1998,Paints and varnishes — Pendulum damping test,Peintures et vernis — Essai d'amortissement du pendule,1998-03-12,2,['87.040'],ISO/TC 35/SC 9,9599,[6116],[3940
• ISO 1522:1998/Cor 1:199831038,IS,Cor,ISO 1522:1998/Cor 1:1998,Paints and varnishes — Pendulum damping test — Technical Corrigendum 1,Peintures et vernis — Essai d'amortissement du pendule — Rectificatif t
• ISO 1522:200639404,IS,,ISO 1522:2006,Paints and varnishes — Pendulum damping test,Peintures et vernis — Essai d'amortissement du pendule,2006-12-01,3,['87.040'],ISO/TC 35/SC 9,9599,"[31038,2492
• ISO 1523:19836117,IS,,ISO 1523:1983,"Paints, varnishes, petroleum and related products — Determination of flashpoint — Closed cup equilibrium method","Peintures, vernis, pétrole et produits ass
• ISO 1524:19836118,IS,,ISO 1524:1983,Paints and varnishes — Determination of fineness of grind,Peintures et vernis — Détermination de la finesse de broyage,1983-05-01,2,['87.040'],ISO/TC 35/SC 9
• ISO 1524:200026990,IS,,ISO 1524:2000,"Paints, varnishes and printing inks — Determination of fineness of grind",Peintures et vernis — Détermination de la finesse de broyage,2000-08-03,3,['87.04
• ISO 1524:201356806,IS,,ISO 1524:2013,"Paints, varnishes and printing inks — Determination of fineness of grind","Peintures, vernis et encres d'imprimerie — Détermination de la finesse de broyag
• ISO 1530:19736119,IS,,ISO 1530:1973,Fishing nets — Description and designation of knotted netting,Filets de pêche — Description et désignation des nappes de filet nouées,1973-07-01,1,['65.150']
• ISO 1539:19806127,IS,,ISO 1539:1980,Programming languages — FORTRAN,Langages de programmation — FORTRAN,1980-03-01,1,['35.060'],ISO/IEC JTC 1,9599,,[6128],"['en','fr']",1
• ISO 1540:19776130,IS,,ISO 1540:1977,Aerospace — Characteristics of aircraft electrical systems,Aéronautique — Caractéristiques des réseaux électriques à bord des aéronefs,1977-12-01,1,['49.060'
• ISO 1540:19846131,IS,,ISO 1540:1984,Aerospace — Characteristics of aircraft electrical systems,Aéronautique — Caractéristiques des réseaux électriques à bord des aéronefs,1984-11-01,2,['49.060'
• ISO 1559:19786147,IS,,ISO 1559:1978,Alloy for dental amalgam,Alliage pour amalgame dentaire,1978-11-01,1,['11.060.10'],ISO/TC 106/SC 1,9599,,"[6149,6148]","['en','fr']",3
• ISO 1559:19866148,IS,,ISO 1559:1986,Dentistry — Alloys for dental amalgam,Art dentaire — Alliages pour amalgame dentaire,1986-06-12,2,['11.060.10'],ISO/TC 106/SC 1,9599,[6147],[6149],"['en','fr
• ISO 1559:19956149,IS,,ISO 1559:1995,Dental materials — Alloys for dental amalgam,Produits dentaires — Alliages pour amalgame dentaire,1995-12-14,3,['11.060.10'],ISO/TC 106/SC 1,9599,"[6147,6148
• ISO 1559:1995/Cor 1:199728797,IS,Cor,ISO 1559:1995/Cor 1:1997,Dental materials — Alloys for dental amalgam — Technical Corrigendum 1,Produits dentaires — Alliages pour amalgame dentaire — Rectificatif tec
• ISO 1560:19756150,IS,,ISO 1560:1975,Dental mercury,Mercure à usage dentaire,1975-03-01,1,['11.060.10'],ISO/TC 106/SC 1,9599,,[6151],"['en','fr']",1
• ISO 1560:19856151,IS,,ISO 1560:1985,Dental mercury,Mercure à usage dentaire,1985-04-18,2,['11.060.10'],ISO/TC 106/SC 1,9599,[6150],[37112],"['en','fr']",2
• ISO 1561:19756152,IS,,ISO 1561:1975,Dental inlay casting wax,Cires à inlays dentaires,1975-05-01,1,['11.060.10'],ISO/TC 106/SC 2,9599,,[20265],"['en','fr']",5
• ISO 1561:199520265,IS,,ISO 1561:1995,Dental casting wax,Cires dentaires,1995-10-19,2,['11.060.10'],ISO/TC 106/SC 2,9599,[6152],"[34948,37635]","['en','fr']",7
• ISO 1562:19766153,IS,,ISO 1562:1976,Dental casting gold alloys,Alliages d'or dentaires à couler,1976-12-01,1,['11.060.10'],ISO/TC 106/SC 2,9599,,"[6154,6155]",['en'],3
• ISO 1562:19846154,IS,,ISO 1562:1984,Dental casting gold alloys,Alliages d'or dentaires à couler,1984-08-01,2,['11.060.10'],ISO/TC 106/SC 2,9599,[6153],[6155],"['en','fr']",4
• ISO 1562:19936155,IS,,ISO 1562:1993,Dental casting gold alloys,Alliages d'or dentaires à couler,1993-11-18,3,['11.060.10'],ISO/TC 106/SC 2,9599,"[6154,6153]",[33951],"['en','fr']",5
• ISO 1562:200433951,IS,,ISO 1562:2004,Dentistry — Casting gold alloys,Art dentaire — Alliages d'or à couler,2004-04-26,4,['11.060.10'],ISO/TC 106/SC 2,9599,[6155],[36412],"['en','fr']",16
• ISO 1563:19786156,IS,,ISO 1563:1978,Alginate dental impression material,Produits pour empreintes dentaires à base d'alginate,1978-06-01,1,['11.060.10'],ISO/TC 106/SC 2,9599,,[6157],"['en','fr']
• ISO 1563:1978/Amd 1:19816158,IS,Amd,ISO 1563:1978/Amd 1:1981,Alginate dental impression material — Amendment 1,Produits pour empreintes dentaires à base d'alginate — Amendement 1,1981-10-01,1,['11.060.10'
• ISO 1563:19906157,IS,,ISO 1563:1990,Dental alginate impression material,Produits pour empreintes dentaires à base d'alginate,1990-08-30,2,['11.060.10'],ISO/TC 106/SC 2,9599,"[6158,6156]","[5531
• ISO 1564:19766159,IS,,ISO 1564:1976,Agar impression material,Produits pour empreintes à base d'agar-agar,1976-12-01,1,['11.060.10'],ISO/TC 106/SC 2,9599,,[22897],"['en','fr']",6
• ISO 1564:199522897,IS,,ISO 1564:1995,Dental aqueous impression materials based on agar,Produits dentaires hydrauliques pour empreintes à base d'agar-agar,1995-10-26,2,['11.060.10'],ISO/TC 106/S
• ISO 1565:19786160,IS,,ISO 1565:1978,Dental silicate cement (hand mixed),Ciments dentaires aux silicates (mélange manuel),1978-06-01,1,['11.060.10'],ISO/TC 106/SC 1,9599,,[17800],"['en','fr']",9
• ISO 1566:19786161,IS,,ISO 1566:1978,Dental zinc phosphate cement,Ciments dentaires au phosphate de zinc,1978-06-01,1,['11.060.10'],ISO/TC 106/SC 1,9599,,[17800],"['en','fr']",9
• ISO 1567:19786162,IS,,ISO 1567:1978,Denture base resin,Résines pour bases de prothèses dentaires,1978-12-01,1,['11.060.10'],ISO/TC 106/SC 2,9599,,[6163],"['en','fr']",8
• ISO 1567:19886163,IS,,ISO 1567:1988,Dentistry — Denture base polymers,Art dentaire — Polymères pour base de prothèses dentaires,1988-10-20,2,['11.060.10'],ISO/TC 106/SC 2,9599,[6162],[20266],"[
• ISO 1567:199920266,IS,,ISO 1567:1999,Dentistry — Denture base polymers,Art dentaire — Polymères pour base de prothèses dentaires,1999-02-11,3,['11.060.10'],ISO/TC 106/SC 2,9599,[6163],[39740],"
• ISO 1567:1999/Amd 1:200335350,IS,Amd,ISO 1567:1999/Amd 1:2003,Dentistry — Denture base polymers — Amendment 1,Art dentaire — Polymères pour base de prothèses dentaires — Amendement 1,2003-08-22,3,['11.060
• ISO 1574:19806168,IS,,ISO 1574:1980,Tea — Determination of water extract,Thé — Détermination de l'extrait à l'eau,1980-08-01,2,['67.140.10'],ISO/TC 34/SC 8,9599,,[17627],"['en','fr']",2
• ISO 1575:19806169,IS,,ISO 1575:1980,Tea — Determination of total ash,Thé — Détermination des cendres totales,1980-08-01,2,['67.140.10'],ISO/TC 34/SC 8,9599,,[6170],"['en','fr']",2
• ISO 1576:19756171,IS,,ISO 1576:1975,Tea — Determination of water-soluble ash and water-insoluble ash,Thé — Détermination des cendres solubles et des cendres insolubles dans l'eau,1975-12-01,1,[
• ISO 1577:19806173,IS,,ISO 1577:1980,Tea — Determination of acid-insoluble ash,Thé — Détermination des cendres insolubles dans l'acide,1980-08-01,1,['67.140.10'],ISO/TC 34/SC 8,9599,,[6174],['en
• ISO 1580:19836176,IS,,ISO 1580:1983,Slotted pan head screws — Product grade A,Vis à métaux à tête cylindrique large fendue — Grade A,1983-07-01,1,['21.060.10'],ISO/TC 2,9599,,[6177],"['en','fr'
• ISO 1580:19946177,IS,,ISO 1580:1994,Slotted pan head screws — Product grade A,Vis à métaux à tête cylindrique large fendue — Grade A,1994-04-21,2,['21.060.10'],ISO/TC 2/SC 11,9599,[6176],[57369
• ISO 1585:19826178,IS,,ISO 1585:1982,Road vehicles — Engines test code — Net power,Véhicules routiers — Code d'essai des moteurs — Puissance nette,1982-05-01,2,['43.060.01'],ISO/TC 22,9599,,[617
• ISO 1585:19926179,IS,,ISO 1585:1992,Road vehicles — Engine test code — Net power,Véhicules routiers — Code d'essai des moteurs — Puissance nette,1992-10-29,3,['43.060.01'],ISO/TC 22/SC 34,9599,
• ISO 1597:19756189,IS,,ISO 1597:1975,Plastics — Unplasticized cellulose acetate — Determination of acetic acid yield,Matières plastiques — Acétate de cellulose non plastifié — Determination du t
• ISO 1598:19756191,IS,,ISO 1598:1975,Plastics — Cellulose acetate — Determination of insoluble particles,Matières plastiques — Acétate de cellulose — Détermination des particules insolubles,1975
• ISO 1599:19756193,IS,,ISO 1599:1975,Plastics — Cellulose acetate — Determination of viscosity loss on moulding,Matières plastiques — Acétate de cellulose — Perte de viscosité au moulage,1975-06
• ISO 1600:19756195,IS,,ISO 1600:1975,Plastics — Cellulose acetate — Determination of light absorption before and after heating,Matières plastiques — Acétate de cellulose — Détermination de l'abs
• ISO 1604:19766197,IS,,ISO 1604:1976,Endless wide V-belts for industrial speed-changers and groove profiles for corresponding pulleys,Courroies trapézoïdales larges sans fin pour variateurs de v
• ISO 1607-1:19806199,IS,,ISO 1607-1:1980,Positive-displacement vacuum pumps — Measurement of performance characteristics — Part 1: Measurement of volume rate of flow (pumping speed),Pompes primair
• ISO 1607-1:19936200,IS,,ISO 1607-1:1993,Positive-displacement vacuum pumps — Measurement of performance characteristics — Part 1: Measurement of volume rate of flow (pumping speed),Pompes primair
• ISO 1607-2:19786201,IS,,ISO 1607-2:1978,Positive displacement vacuum pumps — Measurement of performance characteristics — Part 2: Measurement of ultimate pressure,Pompes primaires volumétriques à
• ISO 1607-2:19896202,IS,,ISO 1607-2:1989,Positive-displacement vacuum pumps — Measurement of performance characteristics — Part 2: Measurement of ultimate pressure,Pompes primaires volumétriques à
• ISO 1608-1:19806204,IS,,ISO 1608-1:1980,Vapour vacuum pumps — Measurement of performance characteristics — Part 1: Measurement of volume rate of flow (pumping speed),Pompes à vide à jet de vapeur
• ISO 1608-2:19786206,IS,,ISO 1608-2:1978,Vapour vacuum pumps — Measurement of performance characteristics — Part 2: Measurement of critical backing pressure,Pompes à vide à jet de vapeur — Mesurag
• ISO 1609:19866209,IS,,ISO 1609:1986,Vacuum technology — Flange dimensions,Technique du vide — Dimensions des brides,1986-03-06,1,['23.160'],ISO/TC 112,9599,,"[79408,6210]","['en','fr']",8
• ISO 1622-1:19856220,IS,,ISO 1622-1:1985,Plastics — Polystyrene (PS) moulding and extrusion materials — Part 1: Designation,Plastiques — Polystyrène (PS) pour moulage et extrusion — Partie 1: Dési
• ISO 1622-1:199422627,IS,,ISO 1622-1:1994,Plastics — Polystyrene (PS) moulding and extrusion materials — Part 1: Designation system and basis for specifications,Plastiques — Polystyrène (PS) pour
• ISO 1622-1:201255459,IS,,ISO 1622-1:2012,Plastics — Polystyrene (PS) moulding and extrusion materials — Part 1: Designation system and basis for specifications,Plastiques — Polystyrène (PS) pour
• ISO 1622-2:19806221,IS,,ISO 1622-2:1980,Plastics — Polystyrene moulding and extrusion materials — Part 2: Determination of properties,Plastiques — Polystyrène pour moulage et extrusion — Partie 2
• ISO 1622-2:19956222,IS,,ISO 1622-2:1995,Plastics — Polystyrene (PS) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties,Plastiques — Polystyrè
• ISO 1622:19756218,IS,,ISO 1622:1975,Plastics — Polystyrene moulding and extrusion materials — Designation,Matières plastiques — Polystyrènes pour moulage et extrusion — Désignation,1975-06-01,1
• ISO 1624:19786223,IS,,ISO 1624:1978,Plastics — Vinyl chloride homopolymer and copolymer resins — Sieve analysis in water,Plastiques — Résines d'homopolymères et de copolymères de chlorure de vi
• ISO 1625:19776224,IS,,ISO 1625:1977,Plastics — Aqueous dispersions of polymers and copolymers — Determination of residue at 105 degrees C,Plastiques — Dispersions aqueuses de polymères et copol
• ISO 1625:199820922,IS,,ISO 1625:1998,Plastics — Polymer dispersions — Determination of non-volatile matter (residue) at specified temperatures,Plastiques — Dispersions de polymères — Déterminat
• ISO 1628-1:19846227,IS,,ISO 1628-1:1984,Guidelines for the standardization of methods for the determination of viscosity number and limiting viscosity number of polymers in dilute solution — Part
• ISO 1628-1:199825173,IS,,ISO 1628-1:1998,Plastics — Determination of the viscosity of polymers in dilute solution using capillary viscometers — Part 1: General principles,Plastiques — Déterminati
• ISO 1628-1:200951946,IS,,ISO 1628-1:2009,Plastics — Determination of the viscosity of polymers in dilute solution using capillary viscometers — Part 1: General principles,Plastiques — Déterminati
• ISO 1628-1:2009/Amd 1:201256473,IS,Amd,ISO 1628-1:2009/Amd 1:2012,Plastics — Determination of the viscosity of polymers in dilute solution using capillary viscometers — Part 1: General principles — Amendmen
• ISO 1628-1:202179996,IS,,ISO 1628-1:2021,Plastics — Determination of the viscosity of polymers in dilute solution using capillary viscometers — Part 1: General principles,Plastiques — Déterminati
• ISO 1628-2:19886228,IS,,ISO 1628-2:1988,Plastics — Determination of viscosity number and limiting viscosity number — Part 2: Poly(vinyl chloride) resins,Plastiques — Détermination de l'indice de
• ISO 1628-2:199825191,IS,,ISO 1628-2:1998,Plastics — Determination of the viscosity of polymers in dilute solution using capillary viscometers — Part 2: Poly(vinyl chloride) resins,Plastiques — Dé
• ISO 1628-3:19916229,IS,,ISO 1628-3:1991,Plastics — Determination of viscosity number and limiting viscosity number — Part 3: Polyethylenes and polypropylenes,Plastiques — Détermination de l'indic
• ISO 1628-3:1991/Cor 1:19926230,IS,Cor,ISO 1628-3:1991/Cor 1:1992,Plastics — Determination of viscosity number and limiting viscosity number — Part 3: Polyethylenes and polypropylenes — Technical Corrigendum
• ISO 1628-3:200135267,IS,,ISO 1628-3:2001,Plastics — Determination of the viscosity of polymers in dilute solution using capillary viscometers — Part 3: Polyethylenes and polypropylenes,Plastiques
• ISO 1628-4:19866231,IS,,ISO 1628-4:1986,Plastics — Determination of the viscosity of polymers in dilute solution using capillary viscometers — Part 4: Polycarbonate (PC) moulding and extrusion ma
• ISO 1628-5:19866232,IS,,ISO 1628-5:1986,Plastics — Determination of viscosity number and limiting viscosity number — Part 5: Poly(alkylene terephthalates),Plastiques — Détermination de l'indice d
• ISO 1629:19766234,IS,,ISO 1629:1976,Rubbers and latices — Nomenclature,Caoutchouc et latex de caoutchouc — Nomenclature,1976-10-01,1,"['83.060','01.040.83','83.040.10']",ISO/TC 45,9599,,[6235],
• ISO 1629:19876235,IS,,ISO 1629:1987,Rubber and latices — Nomenclature,Caoutchouc et latex — Nomenclature,1987-11-19,2,"['83.060','01.040.83','83.040.10']",ISO/TC 45,9599,[6234],[21814],"['en','
• ISO 1629:199521814,IS,,ISO 1629:1995,Rubber and latices — Nomenclature,Caoutchouc et latex — Nomenclature,1995-11-09,3,"['83.060','01.040.83','83.040.10']",ISO/TC 45,9599,[6235],[60242],"['en',
• ISO 1629:1995/Amd 1:200743915,IS,Amd,ISO 1629:1995/Amd 1:2007,Rubber and latices — Nomenclature — Amendment 1,Caoutchouc et latex — Nomenclature — Amendement 1,2007-11-29,3,"['83.060','01.040.83','83.040.
• ISO 1629:1995/Amd 1:2007/Cor 1:200954703,IS,Cor,ISO 1629:1995/Amd 1:2007/Cor 1:2009,Rubber and latices — Nomenclature — Amendment 1 — Technical Corrigendum 1,Caoutchouc et latex — Nomenclature — Amendement 1 — Recti
• ISO 1629:201360242,IS,,ISO 1629:2013,Rubber and latices — Nomenclature,Caoutchouc et latex — Nomenclature,2013-06-13,4,"['83.060','01.040.83','83.040.10']",ISO/TC 45,9599,"[21814,43915,54703]",
• ISO 1634:19746240,IS,,ISO 1634:1974,"Wrought copper and copper alloys — Rolled flat products (plate, sheet, strip) — Mechanical properties","Cuivre et alliages de cuivre corroyés — Produits lam
• ISO 1637:19746252,IS,,ISO 1637:1974,Wrought copper and copper alloys — Solid products supplied in straight lengths — Mechanical properties,Cuivre et alliages de cuivre corroyés — Produits plein
• ISO 1638:19746254,IS,,ISO 1638:1974,Wrought copper and copper alloys — Drawn solid products supplied in coils or on reels — Mechanical properties,Cuivre et alliages de cuivre corroyés — Produit
• ISO 1639:19746256,IS,,ISO 1639:1974,Wrought copper alloys — Extruded sections — Mechanical properties,Alliages de cuivre corroyés — Profilés filés — Caractéristiques mécaniques,1974-11-01,1,['7
• ISO 1640:19746257,IS,,ISO 1640:1974,Wrought copper alloys — Forgings — Mechanical properties,Alliages de cuivre corroyés — Pièces forgées — Caractéristiques mécaniques,1974-11-01,1,['77.150.30'
• ISO 1641-1:19786258,IS,,ISO 1641-1:1978,End mills and slot drills — Part 1: Milling cutters with parallel shanks,Fraises cylindriques 2 tailles et fraises à rainurer — Partie 1: Fraises à queue c
• ISO 1641-1:200331564,IS,,ISO 1641-1:2003,End mills and slot drills — Part 1: Milling cutters with cylindrical shanks,Fraises cylindriques 2 tailles et fraises à rainurer — Partie 1: Fraises à que
• ISO 1641-2:19786259,IS,,ISO 1641-2:1978,End mills and slot drills — Part 2: Milling cutters with Morse taper shanks,Fraises cylindriques 2 tailles et fraises à rainurer — Partie 2: Fraises à queu
• ISO 1641-3:19786260,IS,,ISO 1641-3:1978,End mills and slot drills — Part 3: Milling cutters with 7/24 taper shanks,Fraises cylindriques 2 tailles et fraises à rainurer — Partie 3: Fraises à queue
• ISO 1641-3:200331565,IS,,ISO 1641-3:2003,End mills and slot drills — Part 3: Milling cutters with 7/24 taper shanks,Fraises cylindriques 2 tailles et fraises à rainurer — Partie 3: Fraises à queu
• ISO 1642:19796261,IS,,ISO 1642:1979,Plastics — Industrial laminated sheets based on thermosetting resins — Specification,Plastiques — Stratifiés industriels en planches à base de résines thermo
• ISO 1652:19746267,IS,,ISO 1652:1974,Rubber latex — Determination of viscosity,Latex d'élastomère — Détermination de la viscosité,1974-03-01,1,['83.040.10'],ISO/TC 45,9599,,[6268],"['en','fr']",
• ISO 1652:19856268,IS,,ISO 1652:1985,Rubber latex — Determination of viscosity,Latex de caoutchouc — Détermination de la viscosité,1985-11-15,2,['83.040.10'],ISO/TC 45/SC 3,9599,[6267],[30363],"
• ISO 1652:200430363,IS,,ISO 1652:2004,Rubber latex — Determination of apparent viscosity by the Brookfield test method,Latex de caoutchouc — Détermination de la viscosité apparente par la méthod
• ISO 1653:19756269,IS,,ISO 1653:1975,Vulcanized rubbers — Determination of compression set under constant deflection at low temperatures,Élastomères vulcanisés — Détermination de la déformation
• ISO 1655:19756271,IS,,ISO 1655:1975,Raw rubber and rubber latex — Determination of manganese content — Potassium periodate photometric method,Caoutchoucs bruts et latex de caoutchouc — Dosage d
• ISO 1656:19746272,IS,,ISO 1656:1974,Raw natural rubber and natural rubber latex — Determination of nitrogen,Caoutchouc naturel brut et latex de caoutchouc naturel — Dosage de l'azote,1974-02-01
• ISO 1656:19886273,IS,,ISO 1656:1988,"Rubber, raw natural, and rubber latex, natural — Determination of nitrogen content",Caoutchouc brut naturel et latex de caoutchouc naturel — Dosage de l'azo
• ISO 1656:199623784,IS,,ISO 1656:1996,"Rubber, raw natural, and rubber latex, natural — Determination of nitrogen content",Caoutchouc brut naturel et latex de caoutchouc naturel — Dosage de l'az
• ISO 1656:201463607,IS,,ISO 1656:2014,"Rubber, raw natural, and rubber latex, natural — Determination of nitrogen content",Caoutchouc brut naturel et latex de caoutchouc naturel — Dosage de l'az
• ISO 1657:19756274,IS,,ISO 1657:1975,"Raw rubber and rubber latex — Determination of iron content — 1,10- Phenanthroline photometric method","Élastomères bruts et latex d'élastomère — Dosage du
• ISO 1658:19736276,IS,,ISO 1658:1973,Natural rubber (NR) — Test recipes and evaluation of vulcanization characteristics,Caoutchouc naturel (NR) — Formules et évaluation des propriétés physiques
• ISO 1658:1973/Amd 1:19766278,IS,Amd,ISO 1658:1973/Amd 1:1976,Natural rubber (NR) — Test recipes and evaluation of vulcanization characteristics — Amendment 1,Caoutchouc naturel (NR) — Formules et évaluati
• ISO 1658:19946277,IS,,ISO 1658:1994,Natural rubber (NR) — Evaluation procedure,Caoutchouc naturel (NR) — Méthode d'évaluation,1994-02-17,2,['83.060'],ISO/TC 45/SC 3,9599,"[6278,6276]",[43206],"
• ISO 1658:200943206,IS,,ISO 1658:2009,Natural rubber (NR) — Evaluation procedure,Caoutchouc naturel (NR) — Méthode d'évaluation,2009-08-13,3,['83.060'],ISO/TC 45/SC 3,9599,[6277],[68067],"['en',
• ISO 1658:201568067,IS,,ISO 1658:2015,Natural rubber (NR) — Evaluation procedure,Caoutchouc naturel (NR) — Méthode d'évaluation,2015-07-09,4,['83.060'],ISO/TC 45/SC 3,9599,[43206],[79517],"['en'
• ISO 1660:19826279,IS,,ISO 1660:1982,Technical drawings — Dimensioning and tolerancing of profiles,Dessins techniques — Cotation et tolérancement des profils,1982-12-01,1,['01.100.20'],ISO/TC 10
• ISO 1660:19876280,IS,,ISO 1660:1987,Technical drawings — Dimensioning and tolerancing of profiles,Dessins techniques — Cotation et tolérancement des profils,1987-11-02,2,['01.100.20'],ISO/TC 21
• ISO 1663:19816283,IS,,ISO 1663:1981,Cellular plastics — Determination of water vapour transmission rate of rigid materials,Plastiques alvéolaires — Détermination du taux de transmission de la v
• ISO 1663:19996284,IS,,ISO 1663:1999,Rigid cellular plastics — Determination of water vapour transmission properties,Plastiques alvéolaires rigides — Détermination des caractéristiques de transm
• ISO 1663:200741676,IS,,ISO 1663:2007,Rigid cellular plastics — Determination of water vapour transmission properties,Plastiques alvéolaires rigides — Détermination des caractéristiques de trans
• ISO 1666:19736285,IS,,ISO 1666:1973,Starch — Determination of moisture content — Oven-drying methods,Amidon et fécule — Détermination de l'humidité — Méthodes par séchage à l'étuve,1973-07-01,1
• ISO 1673:19786287,IS,,ISO 1673:1978,Onions — Guide to storage,Oignons — Guide pour l'entreposage,1978-11-01,1,['67.080.20'],ISO/TC 34,9599,,[6288],"['en','fr']",3
• ISO 1675:19756289,IS,,ISO 1675:1975,Plastics — Liquid resins — Determination of density by the pyknometer method,Matières plastiques — Résines liquides — Détermination de la masse volumique par
• ISO 1675:19856290,IS,,ISO 1675:1985,Plastics — Liquid resins — Determination of density by the pyknometer method,Plastiques — Résines liquides — Détermination de la masse volumique par la métho
• ISO 1677:19776291,IS,,ISO 1677:1977,Sealed radioactive sources — General,Sources radioactives scellées — Généralités,1977-06-01,1,['13.280'],ISO/TC 85,9599,,[2638],"['en','fr']",3
• ISO 1679:19736292,IS,,ISO 1679:1973,Withdrawal of ISO 1679-1973,Annulation de l'ISO 1679-1973,1973-12-01,1,['35.040.10'],ISO/IEC JTC 1,9599,,[12991],['en'],4
• ISO 1680-1:19866294,IS,,ISO 1680-1:1986,Acoustics — Test code for the measurement of airborne noise emitted by rotating electrical machinery — Part 1: Engineering method for free-field conditions
• ISO 1680-2:19866295,IS,,ISO 1680-2:1986,Acoustics — Test code for the measurement of airborne noise emitted by rotating electrical machinery — Part 2: Survey method,Acoustique — Code d'essai pour
• ISO 1680:199925629,IS,,ISO 1680:1999,Acoustics — Test code for the measurement of airborne noise emitted by rotating electrical machines,Acoustique — Code d'essai pour le mesurage du bruit aéri
• ISO 1683:19836298,IS,,ISO 1683:1983,Acoustics — Preferred reference quantities for acoustic levels,Acoustique — Grandeurs normales de référence pour les niveaux acoustiques,1983-10-01,1,['17.14
• ISO 1683:200843600,IS,,ISO 1683:2008,Acoustics — Preferred reference values for acoustical and vibratory levels,Acoustique — Valeurs de référence recommandées pour les niveaux acoustiques et vi
• ISO 1700:19816316,IS,,ISO 1700:1981,Cinematography — 8 mm Type S motion-picture raw stock film — Cutting and perforating dimensions,"Cinématographie — Film 8 mm perforé, type S, vierge — Dimens
• ISO 1701-0:19846322,IS,,ISO 1701-0:1984,"Test conditions for milling machines with table of variable height, with horizontal or vertical spindle — Part 0: General introduction","Conditions de réc
• ISO 1701-2:199725060,IS,,ISO 1701-2:1997,Test conditions for milling machines with table of variable height — Testing of the accuracy — Part 2: Machines with horizontal spindle,Conditions d'essai
• ISO 1701-3:199725061,IS,,ISO 1701-3:1997,Test conditions for milling machines with table of variable height — Testing of accuracy — Part 3: Machines with vertical spindle,Conditions d'essai des m
• ISO 1701:19746318,IS,,ISO 1701:1974,"Test conditions for milling machines with table of variable height, with horizontal or vertical spindle — Testing of the accuracy","Conditions d'essais des
• ISO 1701:1974/Amd 1:19796321,IS,Amd,ISO 1701:1974/Amd 1:1979,"Test conditions for milling machines with table of variable height, with horizontal or vertical spindle — Testing of the accuracy — Amendment
• ISO 1703:19836323,IS,,ISO 1703:1983,Assembly tools for screws and nuts — Nomenclature,Outils de manoeuvre pour vis et écrous — Nomenclature,1983-02-01,2,"['25.140.01','01.040.25']",ISO/TC 29/SC
• ISO 1703:200538458,IS,,ISO 1703:2005,Assembly tools for screws and nuts — Designation and nomenclature,Outils de manoeuvre pour vis et écrous — Désignation et nomenclature,2005-07-18,3,"['25.14
• ISO 1704:19736324,IS,,ISO 1704:1973,Shipbuilding — Anchor chains,Construction navale — Chaînes d'ancres,1973-04-01,1,['47.020.50'],ISO/TC 8,9599,"[4298,3671,3672,4004]",[6325],"['en','fr']",12
• ISO 1704:19916325,IS,,ISO 1704:1991,Shipbuilding — Stud-link anchor chains,Construction navale — Chaînes d'ancre à mailles étançonnées,1991-10-24,2,['47.020.50'],ISO/TC 8/SC 4,9599,[6324],[3715
• ISO 1704:200837151,IS,,ISO 1704:2008,Ships and marine technology — Stud-link anchor chains,Navires et technologie maritime — Chaînes d'ancre à mailles étançonnées,2008-02-20,3,['47.020.50'],ISO
• ISO 1708:19836327,IS,,ISO 1708:1983,Acceptance conditions for general purpose parallel lathes — Testing of the accuracy,Conditions de réception des tours parallèles d'usage général — Contrôle d
• ISO 1709:19756329,IS,,ISO 1709:1975,Nuclear energy — Fissile materials — Principles of criticality safety in handling and processing,Énergie nucléaire — Matières fissiles — Principes de sécurit
• ISO 1709:19952514,IS,,ISO 1709:1995,"Nuclear energy — Fissile materials — Principles of criticality safety in storing, handling and processing","Énergie nucléaire — Matières fissiles — Principe
• ISO 1711-1:199623591,IS,,ISO 1711-1:1996,Assembly tools for screws and nuts — Technical specifications — Part 1: Hand-operated wrenches and sockets,Outils de manoeuvre pour vis et écrous — Spécif
• ISO 1711-1:200740050,IS,,ISO 1711-1:2007,Assembly tools for screws and nuts — Technical specifications — Part 1: Hand-operated wrenches and sockets,Outils de manoeuvre pour vis et écrous — Spécif
• ISO 1711-1:201560229,IS,,ISO 1711-1:2015,Assembly tools for screws and nuts — Technical specifications — Part 1: Hand-operated wrenches and sockets,Outils de manoeuvre pour vis et écrous — Spécif
• ISO 1711-1:201668850,IS,,ISO 1711-1:2016,Assembly tools for screws and nuts — Technical specifications — Part 1: Hand-operated wrenches and sockets,Outils de manoeuvre pour vis et écrous — Spécif
• ISO 1711-2:200534207,IS,,ISO 1711-2:2005,Assembly tools for screws and nuts — Technical specifications — Part 2: Machine-operated sockets ('impact'),Outils de manoeuvre pour vis et écrous — Spéci
• ISO 1711-2:201560230,IS,,ISO 1711-2:2015,Assembly tools for screws and nuts — Technical specifications — Part 2: Machine-operated sockets (impact),Outils de manoeuvre pour vis et écrous — Spécifi
• ISO 1711-2:201668851,IS,,ISO 1711-2:2016,Assembly tools for screws and nuts — Technical specifications — Part 2: Machine-operated sockets (impact),Outils de manoeuvre pour vis et écrous — Spécifi
• ISO 1711:19756331,IS,,ISO 1711:1975,Hand operated wrenches and sockets — Technical specifications,Clés de serrage et douilles à main — Spécifications techniques,1975-02-01,1,['25.140.30'],ISO/T
• ISO 1711:1975/Amd 1:19826332,IS,Amd,ISO 1711:1975/Amd 1:1982,Hand operated wrenches and sockets — Technical specifications — Amendment 1,Clés de serrage et douilles à main — Spécifications techniques — Am
• ISO 1716:19736334,IS,,ISO 1716:1973,Building materials — Determination of calorific potential,Matériaux de construction — Détermination du potentiel calorifique,1973-12-01,1,"['13.220.50','91.1
• ISO 1716:200224928,IS,,ISO 1716:2002,Reaction to fire tests for building products — Determination of the heat of combustion,Essais de réaction au feu des produits de construction — Déterminati
• ISO 1716:201045780,IS,,ISO 1716:2010,Reaction to fire tests for products — Determination of the gross heat of combustion (calorific value),Essais de réaction au feu de produits — Déterminatio
• ISO 1718:19746337,IS,,ISO 1718:1974,Rock drilling — Drill-rods and detachable bits for percussive drilling,Forage des roches — Fleurets et taillants amovibles pour forage percutant,1974-06-01,1
• ISO 1719:19746339,IS,,ISO 1719:1974,Rock drilling — Extension drill-steel equipment for percussive long-hole drilling — Rope-threaded equipments 7/8 to 1 1/4 in (22 to 32 mm),Forage des roches
• ISO 1720:19746340,IS,,ISO 1720:1974,Rock drilling — Extension drill-steel equipment for percussive long-hole drilling — Rope-threaded equipments 1 1/2 to 2 in (38 to 51 mm),Forage des roches —
• ISO 1724:19806343,IS,,ISO 1724:1980,Road vehicles — Electrical connections between towing vehicles and towed vehicles with 6 or 12 V electrical equipment — Type 12 N (normal),Véhicules routiers
• ISO 1724:19976344,IS,,ISO 1724:1997,Road vehicles — Electrical connections between towing and towed vehicles with 12 V systems — 7 pole connector type 12 N (normal),Véhicules routiers — Connexi
• ISO 1726-3:201046105,IS,,ISO 1726-3:2010,Road vehicles — Mechanical couplings between tractors and semi-trailers — Part 3: Requirements for semi-trailer contact area to fifth wheel,Véhicules rout
• ISO 1726:19736345,IS,,ISO 1726:1973,Road vehicles — Mechanical coupling between tractors and semi-trailers — Interchangeability,Véhicules routiers — Liaisons mécaniques entre tracteurs et semi-
• ISO 1726:19896346,IS,,ISO 1726:1989,Road vehicles — Mechanical coupling between tractors and semi-trailers — Interchangeability,Véhicules routiers — Liaisons mécaniques entre tracteurs et semi-
• ISO 1728:19806347,IS,,ISO 1728:1980,Road vehicles — Pneumatic braking connections between motor vehicles and towed vehicles — Interchangeability,Véhicules routiers — Liaisons de freinage pneuma
• ISO 1735:19756351,IS,,ISO 1735:1975,Cheese and processed cheese products — Determination of fat content (Reference method),Fromages et fromages fondus — Détermination de la teneur en matière gr
• ISO 1735:19876352,IS,,ISO 1735:1987,Cheese and processed cheese products — Determination of fat content — Gravimetric method (Reference method),Fromages et fromages fondus — Détermination de la
• ISO 1735:200435250,IS,,ISO 1735:2004,Cheese and processed cheese products — Determination of fat content — Gravimetric method (Reference method),Fromages et fromages fondus — Détermination de l
• ISO 1736:19816353,IS,,ISO 1736:1981,Dried milk — Determination of fat content (Reference method),Lait sec — Détermination de la teneur en matière grasse (Méthode de référence),1981-03-01,1,['67
• ISO 1736:19856354,IS,,ISO 1736:1985,"Dried milk, dried whey, dried buttermilk and dried butter serum — Determination of fat content — Gravimetric method (Reference method)","Lait sec, lactoséru
• ISO 1736:200026548,IS,,ISO 1736:2000,Dried milk and dried milk products — Determination of fat content — Gravimetric method (Reference method),Lait sec et produits à base de lait sec — Détermin
• ISO 1736:200851010,IS,,ISO 1736:2008,Dried milk and dried milk products — Determination of fat content — Gravimetric method (Reference method),Lait sec et produits à base de lait sec — Détermin
• ISO 1737:19816355,IS,,ISO 1737:1981,Evaporated milk and sweetened condensed milk — Determination of fat content (Reference method),Lait condensé sucré ou non sucré — Détermination de la teneur
• ISO 1737:19856356,IS,,ISO 1737:1985,Evaporated milk and sweetened condensed milk — Determination of fat content — Gravimetric method (Reference method),Lait concentré sucré et non sucré — Déter
• ISO 1737:199926547,IS,,ISO 1737:1999,Evaporated milk and sweetened condensed milk — Determination of fat content — Gravimetric method (Reference method),Lait concentré sucré et non sucré — Déte
• ISO 1737:200851011,IS,,ISO 1737:2008,Evaporated milk and sweetened condensed milk — Determination of fat content — Gravimetric method (Reference method),Lait concentré sucré et non sucré — Déte
• ISO 1738:19806357,IS,,ISO 1738:1980,Butter — Determination of salt content (Reference method),Beurre — Détermination de la teneur en sel (Méthode de référence),1980-02-01,1,['67.100.20'],ISO/TC
• ISO 1738:19976358,IS,,ISO 1738:1997,Butter — Determination of salt content,Beurre — Détermination de la teneur en sel,1997-12-11,2,['67.100.20'],ISO/TC 34/SC 5,9599,[6357],[40470],"['en','fr']"
• ISO 1739:19756359,IS,,ISO 1739:1975,Butter — Determination of the refractive index of the fat (Reference method),Beurre — Détermination de l'indice de réfraction de la matière grasse (Méthode d
• ISO 1740:19806360,IS,,ISO 1740:1980,Butter — Determination of the acid value of the fat (Reference method),Beurre — Détermination de l'indice d'acide de la matière grasse (Méthode de référence)
• ISO 1740:19916361,IS,,ISO 1740:1991,Milk fat products and butter — Determination of fat acidity (Reference method),Produits à matière grasse laitière et beurre — Détermination de l'acidité de l
• ISO 1746:19836366,IS,,ISO 1746:1983,Rubber or plastics hoses and tubing — Bending tests,Tuyaux et tubes en caoutchouc ou en plastique — Essais de courbure,1983-11-01,2,['23.040.70'],ISO/TC 45/S
• ISO 1746:199825523,IS,,ISO 1746:1998,Rubber or plastics hoses and tubing — Bending tests,Tuyaux et tubes en caoutchouc ou en plastique — Essais de courbure,1998-05-07,3,"['23.040.20','23.040.70
• ISO 1746:1998/Cor 1:199932118,IS,Cor,ISO 1746:1998/Cor 1:1999,Rubber or plastics hoses and tubing — Bending tests — Technical Corrigendum 1,Tuyaux et tubes en caoutchouc ou en plastique — Essais de courbu
• ISO 1747:19766368,IS,,ISO 1747:1976,"Rubber, vulcanized — Determination of adhesion to rigid plates in shear — Quadruple shear method","Caoutchouc vulcanisé — Détermination de l'adhérence, en c
• ISO 1749:19736369,IS,,ISO 1749:1973,Aircraft — Elastomeric sealing rings — Packaging and identification,Aéronautique — Joints d'étanchéité en élastomère — Emballage et identification,1973-06-01
• ISO 1750:19816370,IS,,ISO 1750:1981,Pesticides and other agrochemicals — Common names,Produits phytosanitaires et assimilés — Noms communs,1981-12-01,1,['65.100.01'],ISO/TC 81,9599,"[5401,4749,
• ISO 1750:1981/Add 1:19836371,IS,Add,ISO 1750:1981/Add 1:1983,Pesticides and other agrochemicals — Common names — Addendum 1,Produits phytosanitaires et assimilés — Noms communs — Additif 1,1983-08-01,1,['
• ISO 1750:1981/Add 2:19836372,IS,Add,ISO 1750:1981/Add 2:1983,Pesticides and other agrochemicals — Common names — Addendum 2,Produits phytosanitaires et assimilés — Noms communs — Additif 2,1983-12-01,1,['
• ISO 1750:1981/Amd 1:19826379,IS,Amd,ISO 1750:1981/Amd 1:1982,Pesticides and other agrochemicals — Common names — Amendment 1,Produits phytosanitaires et assimilés — Noms communs — Amendement 1,1982-12-01,
• ISO 1750:1981/Amd 2:199930915,IS,Amd,ISO 1750:1981/Amd 2:1999,Pesticides and other agrochemicals — Common names — Amendment 2,Produits phytosanitaires et assimilés — Noms communs — Amendement 2,1999-11-11
• ISO 1750:1981/Amd 3:200134647,IS,Amd,ISO 1750:1981/Amd 3:2001,Pesticides and other agrochemicals — Common names — Amendment 3,Produits phytosanitaires et assimilés — Noms communs — Amendement 3,2001-12-06
• ISO 1750:1981/Amd 4:200844608,IS,Amd,ISO 1750:1981/Amd 4:2008,Pesticides and other agrochemicals — Common names — Amendment 4,Produits phytosanitaires et assimilés — Noms communs — Amendement 4,2008-04-24
• ISO 1750:1981/Amd 5:200844984,IS,Amd,ISO 1750:1981/Amd 5:2008,Pesticides and other agrochemicals — Common names — Amendment 5,Produits phytosanitaires et assimilés — Noms communs — Amendement 5,2008-10-22
• ISO 1750:1981/Amd 6:201866863,IS,Amd,ISO 1750:1981/Amd 6:2018,Pesticides and other agrochemicals — Common names — Amendment 6: Meptyldinocap,Produits phytosanitaires et assimilés — Noms communs — Amendeme
• ISO 1750:1981/Amd 7:202180962,IS,Amd,ISO 1750:1981/Amd 7:2021,Pesticides and other agrochemicals — Common names — Amendment 7,Produits phytosanitaires et assimilés — Noms communs — Amendement 7,2021-12-03
• ISO 1751:19776380,IS,,ISO 1751:1977,Shipbuilding — Ships' side scuttles,Construction navale — Hublots de navires,1977-06-01,1,['47.020.10'],ISO/TC 8/SC 8,9599,,[6381],"['en','fr']",11
• ISO 1751:19936381,IS,,ISO 1751:1993,Shipbuilding and marine structures — Ships'side scuttles,Construction navale et structures maritimes — Hublots de navires,1993-02-18,2,['47.020.10'],ISO/TC 8
• ISO 1753:19756382,IS,,ISO 1753:1975,Cinematography — Recording and reproducing head gaps for six-track magnetic sound records on 35 mm motion-picture film containing no picture — Positions and
• ISO 1754:19746383,IS,,ISO 1754:1974,Photography — Cameras using films 35 mm and smaller — Picture sizes,Photographie — Appareils photographiques utilisant les films de 35 mm et moins — Dimensio
• ISO 1754:19866384,IS,,ISO 1754:1986,Photography — Cameras using 35 mm and 16 mm film — Picture sizes,Photographie — Appareils photographiques utilisant des films 35 mm et 16 mm — Dimensions des
• ISO 1754:199820052,IS,,ISO 1754:1998,Photography — Cameras using 35 mm film and roll film — Picture sizes,Photographie — Appareils photographiques utilisant des films et pellicules de 35 mm — D
• ISO 1754:1998/Cor 1:200236428,IS,Cor,ISO 1754:1998/Cor 1:2002,Photography — Cameras using 35 mm film and roll film — Picture sizes — Technical Corrigendum 1,Photographie — Appareils photographiques utilis
• ISO 1755:19736385,IS,,ISO 1755:1973,Photography — Projector slides — Dimensions,"Photographie — Diapositives montées, pour projection — Dimensions",1973-10-01,1,['37.040.10'],ISO/TC 42,9599,,[6
• ISO 1757:19806388,IS,,ISO 1757:1980,Personal photographic dosemeters,Dosimètres photographiques personnels,1980-06-01,1,['13.280'],ISO/TC 85,9599,,[20485],"['en','fr']",9
• ISO 1758:19766389,IS,,ISO 1758:1976,Direct-reading electroscope-type pocket exposure meters,Exposimètres de poche à lecture directe du type électroscope,1976-12-01,1,['13.280'],ISO/TC 85,9599,,
• ISO 1759:19766390,IS,,ISO 1759:1976,Indirect-reading capacitor-type pocket exposure meters and accessory electrometers,Exposimètres de poche à lecture indirecte du type condensateur et électrom
• ISO 1762:19746392,IS,,ISO 1762:1974,Pulps — Determination of ash,Pâtes — Détermination des cendres,1974-09-01,1,['85.040'],ISO/TC 6,9599,,[31630],"['en','fr']",2
• ISO 1762:200131630,IS,,ISO 1762:2001,"Paper, board and pulps — Determination of residue (ash) on ignition at 525 degrees C","Papier, carton et pâtes — Détermination du résidu (cendres) après in
• ISO 1762:201566537,IS,,ISO 1762:2015,"Paper, board and pulps — Determination of residue (ash) on ignition at 525 degrees C","Papier, carton et pâtes — Détermination du résidu (cendres) après in
• ISO 1763:19736393,IS,,ISO 1763:1973,Textile floor coverings — Determination of number of tufts and/or loops per unit length and per unit area,Tapis-moquettes — Détermination du nombre de touffe
• ISO 1763:19866394,IS,,ISO 1763:1986,Carpets — Determination of number of tufts and/or loops per unit length and per unit area,Moquettes — Determination du nombre de touffes ou de boucles par un
• ISO 1764:19756395,IS,,ISO 1764:1975,Textile floor coverings — Determination of mass per unit area of machine made textile floor coverings,Revêtements de sol textiles fabriqués à la machine — Dé
• ISO 1765:19756396,IS,,ISO 1765:1975,Textile floor coverings — Determination of thickness of machine made textile floor coverings,Revêtements de sol textiles fabriqués à la machine — Déterminati
• ISO 1766:19736398,IS,,ISO 1766:1973,Textile floor coverings — Determination of thickness of pile above the backing,Tapis et moquettes — Détermination de l'épaisseur du velours au-dessus du doss
• ISO 1766:19866399,IS,,ISO 1766:1986,Textile floor coverings — Determination of thickness of pile above the substrate,Revêtements de sol textiles — Détermination de l'épaisseur du velours au-des
• ISO 1771:19816405,IS,,ISO 1771:1981,Enclosed-scale general purpose thermometers,Thermomètres à échelle protégée d'usage général,1981-06-01,1,['17.200.20'],ISO/TC 48,9599,,[74918],"['en','fr']",
• ISO 1771:1981/Amd 1:19836406,IS,Amd,ISO 1771:1981/Amd 1:1983,Enclosed-scale general purpose thermometers — Amendment 1,Thermomètres à échelle protégée d'usage général — Amendement 1,1983-08-01,1,['17.200.
• ISO 1773:19766408,IS,,ISO 1773:1976,Laboratory glassware — Boiling flasks (narrow-necked),Verrerie de laboratoire — Fioles coniques et ballons (à col étroit),1976-08-01,1,['71.040.20'],ISO/TC 4
• ISO 1780:19756412,IS,,ISO 1780:1975,"Cinematography — Motion-picture camera cartridge, 8 mm Type S, Model I — Aperture opening, pressure pad and film load — Positions and dimensions","Cinématog
• ISO 1787:19726419,IS,,ISO 1787:1972,Cinematography — Camera usage of 8 mm motion- picture film perforated Type S,"Cinématographie — Position du film 8 mm perforé, type S, dans le couloir de la
• ISO 1789:19736421,IS,,ISO 1789:1973,Withdrawal of ISO 1789-1973,Annulation de l'ISO 1789-1973,1973-11-01,1,['91.010.30'],ISO/TC 59,9599,,[12893],"['en','fr']",1
• ISO 1791:19836423,IS,,ISO 1791:1983,Building construction — Modular co-ordination — Vocabulary,Construction immobilière — Coordination modulaire — Vocabulaire,1983-12-01,2,"['01.040.91','91.010
• ISO 1793:19756424,IS,,ISO 1793:1975,Cinematography — Reels for 16 mm motion-picture projectors (up to and including 120 m capacity : 18 cm size) — Dimensions,Cinématographie — Bobines de projec
• ISO 1795:19746426,IS,,ISO 1795:1974,Raw rubber in bales — Sampling,Caoutchouc brut en balles — Échantillonnage,1974-03-01,1,['83.040.10'],ISO/TC 45,9599,[4144],[6427],"['en','fr']",1
• ISO 1795:19926427,IS,,ISO 1795:1992,"Rubber, raw, natural and synthetic — Sampling and further preparative procedures","Caoutchouc brut, naturel et synthétique — Méthodes d'échantillonnage et d
• ISO 1795:200031520,IS,,ISO 1795:2000,"Rubber, raw natural and raw synthetic — Sampling and further preparative procedures","Caoutchouc, naturel brut et synthétique brut — Méthodes d'échantillon
• ISO 1795:200743710,IS,,ISO 1795:2007,"Rubber, raw natural and raw synthetic — Sampling and further preparative procedures","Caoutchouc, naturel brut et synthétique brut — Méthodes d'échantillon
• ISO 1796:19826428,IS,,ISO 1796:1982,"Rubber, raw — Sample preparation",Caoutchoucs bruts — Préparation des échantillons,1982-03-01,3,['83.040.10'],ISO/TC 45/SC 3,9599,[4144],[6427],"['en','fr']
• ISO 1797-1:19926431,IS,,ISO 1797-1:1992,Dental rotary instruments — Shanks — Part 1: Shanks made of metals,Instruments rotatifs dentaires — Queues — Partie 1: Queues en matériaux métalliques,1992
• ISO 1797-1:1992/Amd 1:199723678,IS,Amd,ISO 1797-1:1992/Amd 1:1997,Dental rotary instruments — Shanks — Part 1: Shanks made of metals — Amendment 1,Instruments rotatifs dentaires — Queues — Partie 1: Queues
• ISO 1797-1:201151955,IS,,ISO 1797-1:2011,Dentistry — Shanks for rotary instruments — Part 1: Shanks made of metals,Médecine bucco-dentaire — Queues pour instruments rotatifs — Partie 1: Queues en
• ISO 1797-2:19926432,IS,,ISO 1797-2:1992,Dental rotary instruments — Shanks — Part 2: Shanks made of plastics,Instruments rotatifs dentaires — Queues — Partie 2: Queues en matières plastiques,1992
• ISO 1797-3:201355931,IS,,ISO 1797-3:2013,Dentistry — Shanks for rotary instruments — Part 3: Shanks made of ceramics,Médecine bucco-dentaire — Queues pour instruments rotatifs — Partie 3: Queues
• ISO 1797:19766429,IS,,ISO 1797:1976,Dental burs and cutters — Fitting dimensions,Fraises et instruments de coupe utilisés en art dentaire — Dimensions d'ajustement,1976-03-01,1,['11.060.20'],IS
• ISO 1797:19856430,IS,,ISO 1797:1985,Dental rotary instruments — Shanks,Instruments rotatifs dentaires — Queues,1985-09-19,2,['11.060.20'],ISO/TC 106/SC 4,9599,[6429],"[6431,6432]",['en'],4
• ISO 1798:19836433,IS,,ISO 1798:1983,"Polymeric materials, cellular flexible — Determination of tensile strength and elongation at break",Matériaux polymères alvéolaires souples - Détermination
• ISO 1798:19972346,IS,,ISO 1798:1997,Flexible cellular polymeric materials — Determination of tensile strength and elongation at break,Matériaux polymères alvéolaires souples — Détermination de
• ISO 1798:1997/Cor 1:200338352,IS,Cor,ISO 1798:1997/Cor 1:2003,Flexible cellular polymeric materials — Determination of tensile strength and elongation at break — Technical Corrigendum 1,Matériaux polymère
• ISO 1802:19746436,IS,,ISO 1802:1974,Natural rubber latex — Determination of boric acid,Latex de caoutchouc naturel — Dosage de l'acide borique,1974-03-01,1,['83.040.10'],ISO/TC 45,9599,,"[6437,
• ISO 1802:19856437,IS,,ISO 1802:1985,Natural rubber latex concentrate — Determination of boric acid content,Latex concentré de caoutchouc naturel — Dosage de l'acide borique,1985-11-07,2,['83.04
• ISO 1803-1:19856441,IS,,ISO 1803-1:1985,Building construction — Tolerances — Vocabulary — Part 1: General terms,Construction immobilière — Tolérances — Vocabulaire — Partie 1: Termes généraux,198
• ISO 1803-2:19866442,IS,,ISO 1803-2:1986,Building construction — Tolerances — Vocabulary — Part 2: Derived terms,Construction immobilière — Tolérances — Vocabulaire — Partie 2: Termes dérivés,1986
• ISO 1803:19736439,IS,,ISO 1803:1973,Tolerances for building — Vocabulary,Tolérances pour le bâtiment — Vocabulaire,1973-11-01,1,"['01.040.91','91.010.30']",ISO/TC 59,9599,,"[6441,6442]","['en',
• ISO 1803:19976440,IS,,ISO 1803:1997,Building construction — Tolerances — Expression of dimensional accuracy — Principles and terminology,Construction immobilière — Tolérances — Expression de l'
• ISO 1804:19726443,IS,,ISO 1804:1972,Doors — Terminology,Portes — Terminologie,1972-05-01,1,"['01.040.91','91.060.50']",ISO/TC 162,9599,,"[73331,53696]","['en','fr']",8
• ISO 1805:19736444,IS,,ISO 1805:1973,Fishing nets — Determination of breaking load and knot breaking load of netting yarns,Filets de pêche — Détermination de la force de rupture et de la force d
• ISO 1806:19736445,IS,,ISO 1806:1973,Fishing nets — Determination of mesh breaking load of netting,Filets de pêche — Détermination de la force de rupture de la maille de nappe de filet,1973-07-0
• ISO 1810:19766448,IS,,ISO 1810:1976,Copper alloys — Determination of nickel (low contents) — Dimethylglyoxime spectrophotometric method,Alliages de cuivre — Dosage du nickel (faibles teneurs) —
• ISO 1813:19796458,IS,,ISO 1813:1979,Antistatic endless V-belts — Electrical conductivity — Characteristic and method of test,"Courroies trapézoïdales sans fin, anti-électrostatiques — Conductib
• ISO 1813:19986459,IS,,ISO 1813:1998,"Belt drives — V-ribbed belts, joined V-belts and V-belts including wide section belts and hexagonal belts — Electrical conductivity of antistatic belts: Cha
• ISO 1813:201455527,IS,,ISO 1813:2014,"Belt drives — V-ribbed belts, joined V-belts and V-belts including wide section belts and hexagonal belts — Electrical conductivity of antistatic belts: Ch
• ISO 1817:19756462,IS,,ISO 1817:1975,Vulcanized rubbers — Resistance to liquids — Methods of test,Caoutchoucs vulcanisés — Résistance aux liquides — Méthodes d'essai,1975-10-01,1,['83.060'],ISO/
• ISO 1817:19856463,IS,,ISO 1817:1985,"Rubber, vulcanized — Determination of the effect of liquids",Caoutchouc vulcanisé — Détermination de l'action des liquides,1985-03-07,2,['83.060'],ISO/TC 45
• ISO 1817:19996464,IS,,ISO 1817:1999,"Rubber, vulcanized — Determination of the effect of liquids",Caoutchouc vulcanisé — Détermination de l'action des liquides,1999-03-04,3,['83.060'],ISO/TC 45
• ISO 1817:200541622,IS,,ISO 1817:2005,"Rubber, vulcanized — Determination of the effect of liquids",Caoutchouc vulcanisé — Détermination de l'action des liquides,2005-10-25,4,['83.060'],ISO/TC 4
• ISO 1817:201153033,IS,,ISO 1817:2011,"Rubber, vulcanized or thermoplastic — Determination of the effect of liquids",Caoutchouc vulcanisé ou thermoplastique — Détermination de l'action des liqui
• ISO 1817:201563612,IS,,ISO 1817:2015,"Rubber, vulcanized or thermoplastic — Determination of the effect of liquids",Caoutchouc vulcanisé ou thermoplastique — Détermination de l'action des liqui
• ISO 1817:202279904,IS,,ISO 1817:2022,"Rubber, vulcanized or thermoplastic — Determination of the effect of liquids",Caoutchouc vulcanisé ou thermoplastique — Détermination de l'action des liqui
• ISO 1817:202486602,IS,,ISO 1817:2024,"Rubber, vulcanized or thermoplastic — Determination of the effect of liquids",Caoutchouc vulcanisé ou thermoplastique — Détermination de l'action des liqui
• ISO 1818:19756465,IS,,ISO 1818:1975,Vulcanized rubbers of low hardness (10 to 35 IRHD) — Determination of hardness,Caoutchoucs vulcanisés de basse dureté (10 à 35 D.I.D.C.) — Détermination de l
• ISO 1820:19756467,IS,,ISO 1820:1975,"Continuous mechanical handling equipment for loose bulk materials — Storage equipment : Storage bins and bunkers, silos and hoppers, bin gates — Safety code
• ISO 1821:19756468,IS,,ISO 1821:1975,Withdrawal of ISO 1821-1975,Annulation de l'ISO 1821-1975,1975-10-01,1,['53.040.01'],ISO/TC 101,9599,,[13741],"['en','fr']",2
• ISO 1822:19736469,IS,,ISO 1822:1973,Withdrawal of ISO 1822-1973,Annulation de l'ISO 1822-1973,1973-12-01,1,['59.060.01'],ISO/TC 38,9599,,[13551],"['en','fr']",4
• ISO 1823-1:19976471,IS,,ISO 1823-1:1997,Rubber hoses and hose assemblies — Part 1: On-shore oil suction and discharge — Specification,Tuyaux et flexibles en caoutchouc — Partie 1: Aspiration et r
• ISO 1823-2:19976472,IS,,ISO 1823-2:1997,Rubber hoses and hose assemblies — Part 2: Ship/dockside discharge — Specification,Tuyaux et flexibles en caoutchouc — Partie 2: Refoulement entre bateau e
• ISO 1823:19756470,IS,,ISO 1823:1975,Rubber hoses for oil suction and discharge,Tuyaux en élastomère pour aspiration et refoulement des produits pétroliers,1975-03-01,1,"['83.140.40','75.200']",
• ISO 1825:19756473,IS,,ISO 1825:1975,Rubber hoses for aircraft ground fuelling without static conducting wire,"Tuyaux en élastomère pour ravitaillement des avions, sans câble métallique de mise
• ISO 1825:19966474,IS,,ISO 1825:1996,Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling — Specification,Tuyaux et flexibles en caoutchouc pour le ravitaillement carbura
• ISO 1825:201045402,IS,,ISO 1825:2010,Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling — Specification,Tuyaux et flexibles en caoutchouc pour le ravitaillement carbur
• ISO 1825:201770350,IS,,ISO 1825:2017,Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling — Specification,Tuyaux et flexibles en caoutchouc pour le ravitaillement carbur
• ISO 1826:19816475,IS,,ISO 1826:1981,"Rubber, vulcanized — Time-interval between vulcanization and testing — Specification",Caoutchouc vulcanisé — Délai entre vulcanisation et essai — Spécificat
• ISO 1827:19766476,IS,,ISO 1827:1976,"Rubber, vulcanized — Determination of modulus in shear — Quadruple shear method",Caoutchouc vulcanisé — Détermination du module de cisaillement — Méthode du
• ISO 1827:19916477,IS,,ISO 1827:1991,"Rubber, vulcanized or thermoplastic — Determination of modulus in shear or adhesion to rigid plates — Quadruple shear method",Caoutchouc vulcanisé ou thermo
• ISO 1827:200745385,IS,,ISO 1827:2007,"Rubber, vulcanized or thermoplastic — Determination of shear modulus and adhesion to rigid plates — Quadruple-shear methods",Caoutchouc vulcanisé ou thermo
• ISO 1827:201157721,IS,,ISO 1827:2011,"Rubber, vulcanized or thermoplastic — Determination of shear modulus and adhesion to rigid plates — Quadruple-shear methods",Caoutchouc vulcanisé ou thermo
• ISO 1827:201670363,IS,,ISO 1827:2016,"Rubber, vulcanized or thermoplastic — Determination of shear modulus and adhesion to rigid plates — Quadruple-shear methods",Caoutchouc vulcanisé ou thermo
• ISO 1829:19756478,IS,,ISO 1829:1975,Selection of tolerance zones for general purposes,Sélection de zones de tolérances pour usages généraux,1975-06-01,1,['17.040.10'],ISO/TC 213,9599,,"[29649,4
• ISO 1830:19826479,IS,,ISO 1830:1982,Pulps — Determination of manganese content — Sodium periodate photometric and flame atomic absorption spectrometric methods,Pâtes — Détermination de la teneu
• ISO 1830:200534643,IS,,ISO 1830:2005,"Paper, board and pulps — Determination of acid-soluble manganese","Papiers, cartons et pâtes — Détermination du manganèse soluble dans l'acide",2005-04-20,
• ISO 1832:19856481,IS,,ISO 1832:1985,Indexable inserts for cutting tools — Designation,Plaquettes amovibles pour outils coupants — Désignation,1985-10-17,2,['25.100.01'],ISO/TC 29/SC 9,9599,,[64
• ISO 1832:19916482,IS,,ISO 1832:1991,Indexable inserts for cutting tools — Designation,Plaquettes amovibles pour outils coupants — Désignation,1991-04-11,3,['25.100.01'],ISO/TC 29/SC 9,9599,"[64
• ISO 1832:1991/Amd 1:199928961,IS,Amd,ISO 1832:1991/Amd 1:1999,Indexable inserts for cutting tools — Designation — Amendment 1: Tolerance on d and m of V-shape inserts,Plaquettes amovibles pour outils coup
• ISO 1832:200438903,IS,,ISO 1832:2004,Indexable inserts for cutting tools — Designation,Plaquettes amovibles pour outils coupants — Désignation,2004-06-28,4,['25.100.01'],ISO/TC 29/SC 9,9599,"[2
• ISO 1832:2004/Cor 1:200541850,IS,Cor,ISO 1832:2004/Cor 1:2005,Indexable inserts for cutting tools — Designation — Technical Corrigendum 1,Plaquettes amovibles pour outils coupants — Désignation — Rectific
• ISO 1832:201260123,IS,,ISO 1832:2012,Indexable inserts for cutting tools — Designation,Plaquettes amovibles pour outils coupants — Désignation,2012-11-05,5,['25.100.01'],ISO/TC 29/SC 9,9599,"[3
• ISO 1833-1:200640561,IS,,ISO 1833-1:2006,Textiles — Quantitative chemical analysis — Part 1: General principles of testing,Textiles — Analyse chimique quantitative — Partie 1: Principes généraux
• ISO 1833-1:2006/Cor 1:200955506,IS,Cor,ISO 1833-1:2006/Cor 1:2009,Textiles — Quantitative chemical analysis — Part 1: General principles of testing — Technical Corrigendum 1,Textiles — Analyse chimique quan
• ISO 1833-2:200640562,IS,,ISO 1833-2:2006,Textiles — Quantitative chemical analysis — Part 2: Ternary fibre mixtures,Textiles — Analyse chimique quantitative — Partie 2: Mélanges ternaires de fibr
• ISO 1833-3:200640557,IS,,ISO 1833-3:2006,Textiles — Quantitative chemical analysis — Part 3: Mixtures of acetate and certain other fibres (method using acetone),Textiles — Analyse chimique quanti
• ISO 1833-3:201973901,IS,,ISO 1833-3:2019,Textiles — Quantitative chemical analysis — Part 3: Mixtures of acetate with certain other fibres (method using acetone),Textiles — Analyse chimique quant
• ISO 1833-4:200640563,IS,,ISO 1833-4:2006,Textiles — Quantitative chemical analysis — Part 4: Mixtures of certain protein and certain other fibres (method using hypochlorite),Textiles — Analyse ch
• ISO 1833-4:201770173,IS,,ISO 1833-4:2017,Textiles — Quantitative chemical analysis — Part 4: Mixtures of certain protein fibres with certain other fibres (method using hypochlorite),Textiles — An
• ISO 1833-6:200740565,IS,,ISO 1833-6:2007,Textiles — Quantitative chemical analysis — Part 6: Mixtures of viscose or certain types of cupro or modal or lyocell and cotton fibres (method using form
• ISO 1833-7:200640568,IS,,ISO 1833-7:2006,Textiles — Quantitative chemical analysis — Part 7: Mixtures of polyamide and certain other fibres (method using formic acid),Textiles — Analyse chimique
• ISO 1833-9:200640570,IS,,ISO 1833-9:2006,Textiles — Quantitative chemical analysis — Part 9: Mixtures of acetate and triacetate fibres (method using benzyl alcohol),Textiles — Analyse chimique qu
• ISO 1833-10:200640571,IS,,ISO 1833-10:2006,Textiles — Quantitative chemical analysis — Part 10: Mixtures of triacetate or polylactide and certain other fibres (method using dichloromethane),Textil
• ISO 1833-11:200640572,IS,,ISO 1833-11:2006,Textiles — Quantitative chemical analysis — Part 11: Mixtures of cellulose and polyester fibres (method using sulfuric acid),Textiles — Analyse chimique
• ISO 1833-12:200640573,IS,,ISO 1833-12:2006,"Textiles — Quantitative chemical analysis — Part 12: Mixtures of acrylic, certain modacrylics, certain chlorofibres, certain elastanes and certain other
• ISO 1833-12:201973570,IS,,ISO 1833-12:2019,"Textiles — Quantitative chemical analysis — Part 12: Mixtures of acrylic, certain modacrylics, certain chlorofibres, certain elastane fibres with certai
• ISO 1833-13:200640574,IS,,ISO 1833-13:2006,Textiles — Quantitative chemical analysis — Part 13: Mixtures of certain chlorofibres and certain other fibres (method using carbon disulfide/acetone),Te
• ISO 1833-14:200640575,IS,,ISO 1833-14:2006,Textiles — Quantitative chemical analysis — Part 14: Mixtures of acetate and certain chlorofibres (method using acetic acid),Textiles — Analyse chimique
• ISO 1833-15:200640576,IS,,ISO 1833-15:2006,Textiles — Quantitative chemical analysis — Part 15: Mixtures of jute and certain animal fibres (method by determining nitrogen content),Textiles — Analy
• ISO 1833-16:200640577,IS,,ISO 1833-16:2006,Textiles — Quantitative chemical analysis — Part 16: Mixtures of polypropylene fibres and certain other fibres (method using xylene),Textiles — Analyse c
• ISO 1833-17:200640578,IS,,ISO 1833-17:2006,Textiles — Quantitative chemical analysis — Part 17: Mixtures of chlorofibres (homopolymers of vinyl chloride) and certain other fibres (method using sul
• ISO 1833-18:200640579,IS,,ISO 1833-18:2006,Textiles — Quantitative chemical analysis — Part 18: Mixtures of silk and wool or hair (method using sulfuric acid),Textiles — Analyse chimique quantitat
• ISO 1833-18:201973730,IS,,ISO 1833-18:2019,Textiles — Quantitative chemical analysis — Part 18: Mixtures of silk with other protein fibres (method using sulfuric acid),Textiles — Analyse chimique
• ISO 1833-20:200942996,IS,,ISO 1833-20:2009,Textiles — Quantitative chemical analysis — Part 20: Mixtures of elastane and certain other fibres (method using dimethylacetamide),Textiles — Analyse ch
• ISO 1833-21:200640907,IS,,ISO 1833-21:2006,"Textiles — Quantitative chemical analysis — Part 21: Mixtures of chlorofibres, certain modacrylics, certain elastanes, acetates, triacetates and certain
• ISO 1833-22:201342995,IS,,ISO 1833-22:2013,Textiles — Quantitative chemical analysis — Part 22: Mixtures of viscose or certain types of cupro or modal or lyocell and flax fibres (method using form
• ISO 1833-25:201354128,IS,,ISO 1833-25:2013,Textiles — Quantitative chemical analysis — Part 25: Mixtures of polyester and certain other fibres (method using trichloroacetic acid and chloroform),Te
• ISO 1833-26:201356205,IS,,ISO 1833-26:2013,Textiles — Quantitative chemical analysis — Part 26: Mixtures of melamine and cotton or aramide fibres (method using hot formic acid),Textiles — Analyse
• ISO 1833:19776483,IS,,ISO 1833:1977,Textiles — Binary fibre mixtures — Quantitative chemical analysis,Textiles — Mélanges binaires de fibres — Analyse chimique quantitative,1977-12-01,2,['59.06
• ISO 1833:1977/Amd 1:19806484,IS,Amd,ISO 1833:1977/Amd 1:1980,Textiles — Binary fibre mixtures — Quantitative chemical analysis — Amendment 1,Textiles — Mélanges binaires de fibres — Analyse chimique quant
• ISO 1834:19806485,IS,,ISO 1834:1980,Short link chain for lifting purposes — General conditions of acceptance,Chaînes de levage à maillons courts — Conditions générales de réception,1980-09-01,1
• ISO 1835:19806487,IS,,ISO 1835:1980,"Short link chain for lifting purposes — Grade M (4), non-calibrated, for chain slings etc.","Chaînes de levage à maillons courts, classe M (4), non calibrée
• ISO 1837:19736490,IS,,ISO 1837:1973,Lifting hooks — Nomenclature,Crochets de levage — Nomenclature,1973-02-01,1,"['53.020.30','01.040.53']",ISO/TC 111/SC 3,9599,,"[37599,26370]","['en','fr']",1
• ISO 1838:19756491,IS,,ISO 1838:1975,Fresh pineapples — Guide to storage and transport,Ananas frais — Guide pour l'entreposage et le transport,1975-12-01,1,['67.080.10'],ISO/TC 34,9599,,[6492],"
• ISO 1839-1:19756494,IS,,ISO 1839-1:1975,Withdrawal of ISO 1839/1-1975,Annulation de l'ISO 1839/1-1975,1975-12-01,1,['67.140.10'],ISO/TC 34,9599,,[6493],"['en','fr']",2
• ISO 1839-2:19766495,IS,,ISO 1839-2:1976,Withdrawal of ISO 1839/2-1976,Annulation de l'ISO 1839/2-1976,1976-10-01,1,['67.140.10'],ISO/TC 34,9599,,[6493],"['en','fr']",3
• ISO 1841:19816497,IS,,ISO 1841:1981,Meat and meat products — Determination of chloride content (Reference method),Viandes et produits à base de viande — Détermination de la teneur en chlorures
• ISO 1842:19756499,IS,,ISO 1842:1975,Fruit and vegetable products — Determination of pH,Produits dérivés des fruits et légumes — Mesurage du pH,1975-12-01,1,['67.080.01'],ISO/TC 34/SC 3,9599,,[6
• ISO 1853:19756519,IS,,ISO 1853:1975,Conducting and antistatic rubbers — Measurement of resistivity,Élastomères conducteurs et anti-électrostatiques — Mesurage de la résistivité,1975-01-01,1,['8
• ISO 1853:19986520,IS,,ISO 1853:1998,"Conducting and dissipative rubbers, vulcanized or thermoplastic — Measurement of resistivity",Caoutchoucs vulcanisés ou thermoplastiques conducteurs et diss
• ISO 1853:201153024,IS,,ISO 1853:2011,"Conducting and dissipative rubbers, vulcanized or thermoplastic — Measurement of resistivity",Caoutchoucs vulcanisés ou thermoplastiques conducteurs et dis
• ISO 1854:19726521,IS,,ISO 1854:1972,Whey cheese — Determination of fat content (Reference method),Fromage de sérum — Détermination de la teneur en matière grasse (Méthode de référence),1972-12-
• ISO 1854:19876522,IS,,ISO 1854:1987,Whey cheese — Determination of fat content — Gravimetric method (Reference method),Fromage de sérum — Détermination de la teneur en matière grasse — Méthode
• ISO 1854:199927799,IS,,ISO 1854:1999,Whey cheese — Determination of fat content — Gravimetric method (Reference method),Fromage de sérum — Détermination de la teneur en matière grasse — Méthode
• ISO 1854:200851012,IS,,ISO 1854:2008,Whey cheese — Determination of fat content — Gravimetric method (Reference method),Fromage de sérum — Détermination de la teneur en matière grasse — Méthode
• ISO 1856:19806524,IS,,ISO 1856:1980,"Polymeric materials, cellular flexible — Determination of compression set",Matériaux polymères alvéolaires souples — Détermination de la rémanence à la comp
• ISO 1856:20002330,IS,,ISO 1856:2000,Flexible cellular polymeric materials — Determination of compression set,Matériaux polymères alvéolaires souples — Détermination de la déformation rémanente
• ISO 1856:2000/Amd 1:200743717,IS,Amd,ISO 1856:2000/Amd 1:2007,Flexible cellular polymeric materials — Determination of compression set — Amendment 1,Matériaux polymères alvéolaires souples — Détermination
• ISO 1860:19786527,IS,,ISO 1860:1978,Information processing — Precision reels for magnetic tape used in interchange instrumentation applications,Traitement de l'information — Bobines de précisio
• ISO 1863:19766531,IS,,ISO 1863:1976,"Information processing — 9- track, 12,7 mm (0.5 in) wide magnetic tape for information interchange recorded at 32 rpmm (800 rpi)","Traitement de l'informati
• ISO 1864:19846533,IS,,ISO 1864:1984,"Information processing — Unrecorded 12,7 mm (0.5 in) wide magnetic tape for information interchange — 32 ftpmm (800 ftpi) NRZ1, 126 ftpmm (3 200 ftpi) phase
• ISO 1864:19856534,IS,,ISO 1864:1985,"Information processing — Unrecorded 12,7 mm (0,5 in) wide magnetic tape for information interchange — 32 ftpmm (800 ftpi) NRZ1, 126 ftpmm (3 200 ftpi) phase
• ISO 1871:19756542,IS,,ISO 1871:1975,Agricultural food products — General directions for the determination of nitrogen by the Kjeldahl method,Produits agricoles alimentaires — Directives général
• ISO 1872-1:19866544,IS,,ISO 1872-1:1986,Plastics — Polyethylene (PE) and ethylene copolymer thermoplastics — Part 1: Designation,Plastiques — Thermoplastiques à base de polyéthylène (PE) et de co
• ISO 1872-1:199321123,IS,,ISO 1872-1:1993,Plastics — Polyethylene (PE) moulding and extrusion materials — Part 1: Designation system and basis for specifications,Plastiques — Polyéthylène (PE) pou
• ISO 1872-2:19896545,IS,,ISO 1872-2:1989,Plastics — Polyethylene (PE) and ethylene copolymer thermoplastics — Part 2: Preparation of test specimens and determination of properties,Plastiques — The
• ISO 1872-2:199721111,IS,,ISO 1872-2:1997,Plastics — Polyethylene (PE) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties,Plastiques — Polyéth
• ISO 1872-2:1997/Amd 1:200028381,IS,Amd,ISO 1872-2:1997/Amd 1:2000,Plastics — Polyethylene (PE) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties — Amen
• ISO 1872-2:200738243,IS,,ISO 1872-2:2007,Plastics — Polyethylene (PE) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties,Plastiques — Polyéth
• ISO 1872:19726543,IS,,ISO 1872:1972,Polyethylene thermoplastic materials — Designation,Matériaux thermoplastiques à base de polyéthylène — Désignation,1972-01-01,1,['83.080.20'],ISO/TC 61/SC 9,
• ISO 1873-1:19866546,IS,,ISO 1873-1:1986,Plastics — Polypropylene (PP) and propylene-copolymer thermoplastics — Part 1: Designation,Plastiques — Thermoplastiques à base de polypropylène (PP) et de
• ISO 1873-1:19916547,IS,,ISO 1873-1:1991,Plastics — Polypropylene (PP) and propylene-copolymer thermoplastics — Part 1: Designation,Plastiques — Thermoplastiques à base de polypropylène (PP) et de
• ISO 1873-1:199523928,IS,,ISO 1873-1:1995,Plastics — Polypropylene (PP) moulding and extrusion materials — Part 1: Designation system and basis for specifications,Plastiques — Polypropylène (PP) p
• ISO 1873-2:19896548,IS,,ISO 1873-2:1989,Plastics — Polypropylene (PP) and propylene-copolymer thermoplastics — Part 2: Preparation of test specimens and determination of properties,Plastiques — T
• ISO 1873-2:199721110,IS,,ISO 1873-2:1997,Plastics — Polypropylene (PP) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties,Plastiques — Polypr
• ISO 1873-2:1997/Amd 1:200028382,IS,Amd,ISO 1873-2:1997/Amd 1:2000,Plastics — Polypropylene (PP) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties — Ame
• ISO 1873-2:200742465,IS,,ISO 1873-2:2007,Plastics — Polypropylene (PP) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties,Plastiques — Polypr
• ISO 1874-1:19856550,IS,,ISO 1874-1:1985,Plastics — Polyamide (PA) homopolymers for moulding and extrusion — Part 1: Designation,Plastiques — Homopolymères polyamides pour moulage et extrusion — P
• ISO 1874-1:19926551,IS,,ISO 1874-1:1992,Plastics — Polyamide (PA) moulding and extrusion materials — Part 1: Designation,Plastiques — Matériaux polyamides (PA) pour moulage et extrusion — Partie
• ISO 1874-1:201041675,IS,,ISO 1874-1:2010,Plastics — Polyamide (PA) moulding and extrusion materials — Part 1: Designation system and basis for specification,Plastiques — Matériaux polyamides (PA)
• ISO 1874-2:19876552,IS,,ISO 1874-2:1987,Plastics — Polyamide (PA) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties,Plastiques — Matériaux p
• ISO 1874-2:199523946,IS,,ISO 1874-2:1995,Plastics — Polyamide (PA) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties,Plastiques — Matériaux
• ISO 1874-2:200634835,IS,,ISO 1874-2:2006,Plastics — Polyamide (PA) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties,Plastiques — Matériaux
• ISO 1874-2:2006/Amd 1:201052170,IS,Amd,ISO 1874-2:2006/Amd 1:2010,Plastics — Polyamide (PA) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties — Amendme
• ISO 1874-2:201255458,IS,,ISO 1874-2:2012,Plastics — Polyamide (PA) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties,Plastiques — Matériaux
• ISO 1880:19796556,IS,,ISO 1880:1979,Instruments for the measurement of surface roughness by the profile method — Contact (stylus) instruments of progressive profile transformation — Profile rec
• ISO 1881:19736557,IS,,ISO 1881:1973,Withdrawal of ISO 1881-1973,Annulation de l'ISO 1881-1973,1973-11-01,1,['75.160.10'],ISO/TC 27,9599,,[4644],['en'],2
• ISO 1886:19806558,IS,,ISO 1886:1980,Textile glass — Method of sampling applicable to batches,Verre textile — Méthode d'échantillonnage applicable à des lots,1980-11-01,2,['59.100.10'],ISO/TC 61
• ISO 1887:19806560,IS,,ISO 1887:1980,Textile glass — Determination of combustible matter content,Verre textile — Détermination de la teneur en matières combustibles,1980-05-01,2,['59.100.10'],IS
• ISO 1887:19956561,IS,,ISO 1887:1995,Textile glass — Determination of combustible-matter content,Verre textile — Détermination de la teneur en matières combustibles,1995-05-18,3,['59.100.10'],IS
• ISO 1888:19796562,IS,,ISO 1888:1979,Textile glass — Determination of the average diameter of staple fibres or continuous filaments constituting a textile glass yarn — Cross-section method,Verre
• ISO 1888:19966563,IS,,ISO 1888:1996,Textile glass — Staple fibres or filaments — Determination of average diameter,Verre textile — Fibres discontinues et filaments — Détermination du diamètre m
• ISO 1888:200643619,IS,,ISO 1888:2006,Textile glass — Staple fibres or filaments — Determination of average diameter,Verre textile — Fibres discontinues et filaments — Détermination du diamètre
• ISO 1889:19756564,IS,,ISO 1889:1975,"Textile glass products — Continuous filament yarns, staple fibre yarns and rovings in the form of packages — Determination of linear density","Produits en v

← records 1,601–2,000 · All of Withdrawn and superseded ISO standards · records 2,401 on →