Records 1,601–2,000 — Withdrawn and superseded ISO standards

Records 1,601 to 2,000 of 24,640. Each links to its own page, which carries the source URL and the quoted line that states the value.

• ISO 1092-1:19745597,IS,,ISO 1092-1:1974,Adding machines and calculating machines — Numeric section of ten-key keyboards,Machines à additionner et machines à calculer — Partie 1: des claviers rédu
• ISO 1093:19815598,IS,,ISO 1093:1981,Adding machines and calculating machines — Keytop and printed or displayed symbols,Machines à additionner et machines à calculer — Symboles des touches et sy
• ISO 1095:19765600,IS,,ISO 1095:1976,Shipbuilding — Toughened safety glass panes for ship's side scuttles,Construction navale — Verres de sécurité trempés pour hublots de navires,1976-08-01,2,"[
• ISO 1095:19895601,IS,,ISO 1095:1989,Shipbuilding and marine structures — Toughened safety glass panes for side scuttles,Construction navale et structures maritimes — Verres de sécurité trempés
• ISO 1096:19755602,IS,,ISO 1096:1975,Plywood — Classification,Contreplaqué — Classification,1975-08-01,1,['79.060.10'],ISO/TC 89,9599,,[5603],"['en','fr']",1
• ISO 1096:19995603,IS,,ISO 1096:1999,Plywood — Classification,Contreplaqué — Classification,1999-04-15,2,['79.060.10'],ISO/TC 89/SC 3,9599,[5602],[61092],"['en','fr']",3
• ISO 1096:201461092,IS,,ISO 1096:2014,Plywood — Classification,Contreplaqué — Classification,2014-01-22,3,['79.060.10'],ISO/TC 89/SC 3,9599,[5603],[80859],['en'],2
• ISO 1097:19755604,IS,,ISO 1097:1975,Plywood — Measurement of dimensions of panels,Contreplaqué — Mesurage des dimensions des panneaux,1975-08-01,1,['79.060.10'],ISO/TC 89,9599,,[26709],"['en','
• ISO 1098:19755605,IS,,ISO 1098:1975,Veneer plywood for general use — General requirements,Contreplaqué à plis d'usage général — Conditions générales,1975-08-01,1,['79.060.10'],ISO/TC 89,9599,,[
• ISO 1099:19755607,IS,,ISO 1099:1975,Metals — Axial load fatigue testing,Métaux — Essais de fatigue par charge axiale,1975-11-01,1,['77.040.10'],ISO/TC 164,9599,,"[5608,36108]","['en','fr']",5
• ISO 1099:200636108,IS,,ISO 1099:2006,Metallic materials — Fatigue testing — Axial force-controlled method,Matériaux métalliques — Essais de fatigue — Méthode par force axiale contrôlée,2006-04-
• ISO 1100-1:19815610,IS,,ISO 1100-1:1981,Liquid flow measurement in open channels — Part 1: Establishment and operation of a gauging station,Mesure de débit des liquides dans les canaux découverts
• ISO 1100-1:19965611,IS,,ISO 1100-1:1996,Measurement of liquid flow in open channels — Part 1: Establishment and operation of a gauging station,Mesurage de débit des liquides dans les canaux décou
• ISO 1100-2:19825612,IS,,ISO 1100-2:1982,Liquid flow measurement in open channels — Part 2: Determination of the stage-discharge relation,Mesure de débit des liquides dans les canaux découverts —
• ISO 1100-2:19985613,IS,,ISO 1100-2:1998,Measurement of liquid flow in open channels — Part 2: Determination of the stage-discharge relation,Mesurage de débit des liquides dans les canaux découver
• ISO 1100-2:1998/Cor 1:200034341,IS,Cor,ISO 1100-2:1998/Cor 1:2000,Measurement of liquid flow in open channels — Part 2: Determination of the stage-discharge relation — Technical Corrigendum 1,Mesurage de dé
• ISO 1100-2:201042207,IS,,ISO 1100-2:2010,Hydrometry — Measurement of liquid flow in open channels — Part 2: Determination of the stage-discharge relationship,Hydrométrie — Mesurage du débit des l
• ISO 1100:19735609,IS,,ISO 1100:1973,Withdrawal of ISO 1100-1973,Annulation de l'ISO 1100-1973,1973-12-01,1,['17.120.20'],ISO/TC 113,9599,,"[5610,5612]","['en','fr']",29
• ISO 1101-2:19745617,IS,,ISO 1101-2:1974,Technical drawings — Tolerances of form and of position — Part 2: Maximum material principle,Dessins techniques — Tolérances de forme et tolérances de posi
• ISO 1101:19835614,IS,,ISO 1101:1983,"Technical drawings — Geometrical tolerancing — Tolerancing of form, orientation, location and run-out — Generalities, definitions, symbols, indications on d
• ISO 1101:20041147,IS,,ISO 1101:2004,"Geometrical Product Specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out","Spécification géométrique des p
• ISO 1101:201259490,IS,,ISO 1101:2012,"Geometrical product specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out","Spécification géométrique des
• ISO 1101:2012/Cor 1:201363512,IS,Cor,ISO 1101:2012/Cor 1:2013,"Geometrical product specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out — Technical Corrig
• ISO 1102:19755618,IS,,ISO 1102:1975,Road vehicles — Mechanical connections between towing vehicles and trailers — Interchangeability,Véhicules routiers — Liaisons mécaniques entre véhicules tra
• ISO 1102:19865619,IS,,ISO 1102:1986,Commercial road vehicles — Mechanical connections between towing vehicles and trailers — 50 mm drawbar couplings,Véhicules routiers utilitaires — Liaisons mé
• ISO 1103:19765620,IS,,ISO 1103:1976,Road vehicles — Caravans and light trailers — Coupling ball — Dimensional characteristics,Véhicules routiers — Caravanes et remorques légères — Boule d'attel
• ISO 1103:19961099,IS,,ISO 1103:1996,Road vehicles — Coupling balls for caravans and light trailers — Dimensions,Véhicules routiers — Boules d'attelage pour caravanes et remorques légères — Cara
• ISO 1106-1:19845624,IS,,ISO 1106-1:1984,Recommended practice for radiographic examination of fusion welded joints — Part 1: Fusion welded butt joints in steel plates up to 50 mm thick,Pratique re
• ISO 1106-2:19855625,IS,,ISO 1106-2:1985,Recommended practice for radiographic examination of fusion welded joints — Part 2: Fusion welded butt joints in steel plates thicker than 50 mm and up to
• ISO 1106-3:19845626,IS,,ISO 1106-3:1984,Recommended practice for radiographic examination of fusion welded joints — Part 3: Fusion welded circumferential joints in steel pipes of up to 50 mm wall
• ISO 1107:19745627,IS,,ISO 1107:1974,Fishing nets — Netting — Basic terms and definitions,Filets de pêche — Nappes de filet — Termes fondamentaux et définitions,1974-02-01,1,"['01.040.65','65.15
• ISO 1107:200334628,IS,,ISO 1107:2003,Fishing nets — Netting — Basic terms and definitions,Filets de pêche — Nappes de filet — Termes fondamentaux et définitions,2003-06-16,2,"['01.040.65','65.1
• ISO 1108:19805628,IS,,ISO 1108:1980,Spices and condiments — Determination of non-volatile ether extract,Épices — Détermination de l'extrait éthéré non volatil,1980-02-01,1,['67.220.10'],ISO/TC
• ISO 1109:19755630,IS,,ISO 1109:1975,Refractory products — Classification of dense shaped refractory products,Produits réfractaires — Classification des produits réfractaires façonnés denses,197
• ISO 1110:19755631,IS,,ISO 1110:1975,"Plastics — Polyamide 66, 610 and 6 — Accelerated conditioning of test specimens","Matières plastiques — Polyamides 66, 610 et 6 — Conditionnement accéléré d
• ISO 1110:19875632,IS,,ISO 1110:1987,Plastics — Polyamides — Accelerated conditioning of test specimens,Plastiques — Polyamides — Conditionnement accéléré d'éprouvettes,1987-04-16,2,['83.080.20'
• ISO 1110:199522176,IS,,ISO 1110:1995,Plastics — Polyamides — Accelerated conditioning of test specimens,Plastiques — Polyamides — Conditionnement accéléré d'éprouvettes,1995-01-26,3,['83.080.20
• ISO 1111-1:19835633,IS,,ISO 1111-1:1983,Single cold-reduced tinplate and single cold-reduced blackplate — Part 1: Electrolytic and hot-dipped tinplate sheet and blackplate sheet,Fer-blanc et fer
• ISO 1111-2:19835634,IS,,ISO 1111-2:1983,Single cold-reduced tinplate and single cold-reduced blackplate — Part 2: Electrolytic tinplate coil and blackplate coil for subsequent cutting into sheet
• ISO 1112:19745635,IS,,ISO 1112:1974,Horology — Functional and non-functional jewels,Horlogerie — Pierres fonctionnelles et non fonctionnelles,1974-10-01,1,['39.040.01'],ISO/TC 114,9599,,[25349]
• ISO 1112:199925349,IS,,ISO 1112:1999,Horology — Functional and non-functional jewels,Horlogerie — Pierres fonctionnelles et non fonctionnelles,1999-08-19,2,"['01.040.39','39.040.01']",ISO/TC 11
• ISO 1114:19775637,IS,,ISO 1114:1977,Cocoa beans — Cut test,Fèves de cacao — Épreuve à la coupe,1977-11-01,1,['67.140.30'],ISO/TC 34/SC 18,9599,,[68202],"['en','fr']",1
• ISO 1116:19755639,IS,,ISO 1116:1975,"Microcopying — 16 mm and 35 mm microfilms, spools and reels",Microcopie — Microfilms de 16 mm et de 35 mm et leurs bobines d'approvisionnement et de lecture
• ISO 1117:19755641,IS,,ISO 1117:1975,Bonded abrasive products — Grinding-wheel dimensions (Part 2),Produits abrasifs agglomérés — Dimensions des meules (Deuxième partie),1975-05-01,1,['25.100.70
• ISO 1119:19755643,IS,,ISO 1119:1975,Series of conical tapers and taper angles,Série d'angles de cônes et de conicités,1975-06-01,1,['17.040.01'],ISO/TC 213,9599,,[28068],"['en','fr']",3
• ISO 1119:199828068,IS,,ISO 1119:1998,Geometrical Product Specifications (GPS) — Series of conical tapers and taper angles,Spécification géométrique des produits (GPS) — Série d'angles de cônes
• ISO 1120:19765644,IS,,ISO 1120:1976,Conveyor belts — Determination of strength of mechanical fastenings — Static test method,Courroies transporteuses — Détermination de la résistance des assemb
• ISO 1120:19845645,IS,,ISO 1120:1984,Conveyor belts — Determination of strength of mechanical fastenings — Static test method,Courroies transporteuses — Détermination de la résistance des assemb
• ISO 1120:200235357,IS,,ISO 1120:2002,Conveyor belts — Determination of strength of mechanical fastenings — Static test method,Courroies transporteuses — Détermination de la résistance des assem
• ISO 1120:201261045,IS,,ISO 1120:2012,Conveyor belts — Determination of strength of mechanical fastenings — Static test method,Courroies transporteuses — Détermination de la résistance des assem
• ISO 1122-1:19835648,IS,,ISO 1122-1:1983,Glossary of gear terms — Part 1: Geometrical definitions,Vocabulaire des engrenages — Partie 1: Définitions géométriques,1983-02-01,1,"['21.200','01.040.21
• ISO 1124:19835652,IS,,ISO 1124:1983,Rubber compounding ingredients — Carbon black — Sampling shipments in bulk or in bins,Ingrédients de mélange du caoutchouc — Noir de carbone — Chargement d'é
• ISO 1125:19745654,IS,,ISO 1125:1974,Carbon black for the rubber industry — Determination of ash content,Noir de carbone pour l'industrie des élastomères — Détermination de la teneur en cendres,
• ISO 1125:19905655,IS,,ISO 1125:1990,Rubber compounding ingredients — Carbon black — Determination of ash content,Ingrédients de mélange du caoutchouc — Noir de carbone — Détermination de la ten
• ISO 1125:199927008,IS,,ISO 1125:1999,Rubber compounding ingredients — Carbon black — Determination of ash,Ingrédients de mélange du caoutchouc — Noir de carbone — Détermination du taux de cendr
• ISO 1125:1999/Amd 1:201155611,IS,Amd,ISO 1125:1999/Amd 1:2011,Rubber compounding ingredients — Carbon black — Determination of ash — Amendment 1: Insertion of additional item in test report,Ingrédients de
• ISO 1126:19745656,IS,,ISO 1126:1974,Carbon black for use in the rubber industry — Determination of loss on heating,Noir de carbone pour l'industrie des élastomères — Détermination de la perte à
• ISO 1126:19855657,IS,,ISO 1126:1985,Rubber compounding ingredients — Carbon black — Determination of loss on heating,Ingrédients de mélange du caoutchouc — Noir de carbone — Détermination de la
• ISO 1126:19925658,IS,,ISO 1126:1992,Rubber compounding ingredients — Carbon black — Determination of loss on heating,Ingrédients de mélange du caoutchouc — Noir de carbone — Détermination de la
• ISO 1126:200641278,IS,,ISO 1126:2006,Rubber compounding ingredients — Carbon black — Determination of loss on heating,Ingrédients de mélange du caoutchouc — Noir de carbone — Détermination de l
• ISO 1127:19805659,IS,,ISO 1127:1980,"Stainless steel tubes — Dimensions, tolerances and conventional masses per unit length","Tubes en acier inoxydable — Dimensions, tolérances et masses linéiq
• ISO 1130:19755663,IS,,ISO 1130:1975,Textile fibres — Some methods of sampling for testing,Fibres textiles — Diverses méthodes d'échantillonnage en vue des essais,1975-11-01,1,['59.060.01'],ISO/
• ISO 1132:19805665,IS,,ISO 1132:1980,Rolling bearings — Tolerances — Definitions,Roulements — Tolérances — Définitions,1980-10-01,1,"['21.100.20','01.040.21']",ISO/TC 4,9599,[4065],[20514],"['en
• ISO 1133-1:201144273,IS,,ISO 1133-1:2011,Plastics — Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics — Part 1: Standard method,"Plastiques — Déterm
• ISO 1133:19815666,IS,,ISO 1133:1981,Plastics — Determination of the melt flow rate of thermoplastics,Plastiques — Détermination de l'indice de fluidité à chaud des thermoplastiques,1981-11-01,1
• ISO 1133:19915667,IS,,ISO 1133:1991,Plastics — Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics,"Plastiques — Détermination de l'indice de fl
• ISO 1133:199722113,IS,,ISO 1133:1997,Plastics — Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics,"Plastiques — Détermination de l'indice de f
• ISO 1133:200531267,IS,,ISO 1133:2005,Plastics — Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics,"Plastiques — Détermination de l'indice de f
• ISO 1133:2005/Cor 1:200643873,IS,Cor,ISO 1133:2005/Cor 1:2006,Plastics — Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics — Technical Corrigendum 1,"Pla
• ISO 1134:19805668,IS,,ISO 1134:1980,Pears — Guide to cold storage,Poires — Guide pour l'entreposage réfrigéré,1980-08-01,1,['67.080.10'],ISO/TC 34,9599,,[20799],"['en','fr']",7
• ISO 1135-1:19865670,IS,,ISO 1135-1:1986,"Transfusion equipment for medical use — Part 1: Glass transfusion bottles, closures and bottle caps","Matériel de transfusion à usage médical — Partie 1:
• ISO 1135-3:19865672,IS,,ISO 1135-3:1986,Transfusion equipment for medical use — Part 3: Blood-taking set,Matériel de transfusion à usage médical — Partie 3: Nécessaires pour prélèvement sanguin,1
• ISO 1135-4:19875673,IS,,ISO 1135-4:1987,Transfusion equipment for medical use — Part 4: Transfusion sets for single use,Matériel de transfusion à usage médical — Partie 4: Appareils pour transfus
• ISO 1135-4:199821437,IS,,ISO 1135-4:1998,Transfusion equipment for medical use — Part 4: Transfusion sets for single use,Matériel de transfusion à usage médical — Partie 4: Appareils de transfusi
• ISO 1135-4:200437615,IS,,ISO 1135-4:2004,Transfusion equipment for medical use — Part 4: Transfusion sets for single use,Matériel de transfusion à usage médical — Partie 4: Appareils de transfusi
• ISO 1135-4:201051478,IS,,ISO 1135-4:2010,Transfusion equipment for medical use — Part 4: Transfusion sets for single use,Matériel de transfusion à usage médical — Partie 4: Appareils de transfusi
• ISO 1135-4:201257822,IS,,ISO 1135-4:2012,Transfusion equipment for medical use — Part 4: Transfusion sets for single use,Matériel de transfusion à usage médical — Partie 4: Appareils de transfusi
• ISO 1135-4:201563425,IS,,ISO 1135-4:2015,"Transfusion equipment for medical use — Part 4: Transfusion sets for single use, gravity feed",Matériel de transfusion à usage médical — Partie 4: Appare
• ISO 1135-5:201563426,IS,,ISO 1135-5:2015,Transfusion equipment for medical use — Part 5: Transfusion sets for single use with pressure infusion apparatus,Matériel de transfusion à usage médical —
• ISO 1135:19775669,IS,,ISO 1135:1977,Transfusion equipment for medical use,Matériel de transfusion à usage médical,1977-11-01,1,['11.040.20'],ISO/TC 76,9599,,"[15782,5671,63426,5672,5673]","['en
• ISO 1136:19765674,IS,,ISO 1136:1976,Wool — Determination of mean diameter of fibres — Air permeability method,Laine — Détermination du diamètre moyen des fibres — Méthode perméamétrique,1976-11
• ISO 1138:19815676,IS,,ISO 1138:1981,Rubber compounding ingredients — Carbon black — Determination of sulphur content,Ingrédients de mélange du caoutchouc — Noir de carbone — Dosage du soufre to
• ISO 1138:200744982,IS,,ISO 1138:2007,Rubber compounding ingredients — Carbon black — Determination of sulfur content,Ingrédients de mélange du caoutchouc — Noir de carbone — Dosage du soufre to
• ISO 1138:2007/Amd 1:201257937,IS,Amd,ISO 1138:2007/Amd 1:2012,Rubber compounding ingredients — Carbon black — Determination of sulfur content — Amendment 1: Clarification of digestion temperature in Subcl
• ISO 1139:19735677,IS,,ISO 1139:1973,Textiles — Designation of yarns,Textiles — Désignation des fils,1973-09-01,1,['59.080.20'],ISO/TC 38/SC 23,9599,,[89212],"['en','fr']",5
• ISO 1140:19755678,IS,,ISO 1140:1975,Ropes and cordage — Three-strand polyamide multifilament ropes,Cordages en multifilaments de polyamide à trois torons,1975-05-01,1,['59.080.50'],ISO/TC 38,95
• ISO 1140:19905679,IS,,ISO 1140:1990,Ropes — Polyamide — Specification,Cordages — Polyamide — Spécifications,1990-11-01,2,['59.080.50'],ISO/TC 38,9599,[5678],[36580],"['en','fr']",4
• ISO 1140:200436580,IS,,ISO 1140:2004,"Fibre ropes — Polyamide — 3-, 4- and 8-strand ropes","Cordages en fibres — Polyamide — Cordages à 3, 4 et 8 torons",2004-11-18,3,['59.080.50'],ISO/TC 38,95
• ISO 1140:201256630,IS,,ISO 1140:2012,"Fibre ropes — Polyamide — 3-, 4-, 8- and 12-strand ropes","Cordages en fibres — Polyamide — Cordages à 3, 4, 8 et 12 torons",2012-07-26,4,['59.080.50'],ISO
• ISO 1141:19755680,IS,,ISO 1141:1975,Ropes and cordage — Three-strand polyester multifilament ropes,Cordages en multifilaments de polyester à trois torons,1975-05-01,1,['59.080.50'],ISO/TC 38,95
• ISO 1141:19905681,IS,,ISO 1141:1990,Ropes — Polyester — Specification,Cordages — Polyester — Spécifications,1990-11-01,2,['59.080.50'],ISO/TC 38,9599,[5680],[36581],"['en','fr']",4
• ISO 1141:200436581,IS,,ISO 1141:2004,"Fibre ropes — Polyester — 3-, 4- and 8-strand ropes","Cordages en fibres — Polyester — Cordages à 3, 4 et 8 torons",2004-11-18,3,['59.080.50'],ISO/TC 38,95
• ISO 1141:201256631,IS,,ISO 1141:2012,"Fibre ropes — Polyester — 3-, 4-, 8- and 12-strand ropes","Cordages en fibres — Polyester — Cordages à 3, 4, 8 et 12 torons",2012-07-26,4,['59.080.50'],ISO
• ISO 1142:19735682,IS,,ISO 1142:1973,Ropes — Sampling and conditioning for testing,Cordages — Échantillonnage et conditionnement en vue des essais,1973-09-01,1,['59.080.50'],ISO/TC 38,9599,,[713
• ISO 1143:19755683,IS,,ISO 1143:1975,Metals — Rotating bar bending fatigue testing,Métaux — Essais de fatigue par flexion rotative de barreaux,1975-11-01,1,['77.040.10'],ISO/TC 164,9599,,[41875]
• ISO 1143:201041875,IS,,ISO 1143:2010,Metallic materials — Rotating bar bending fatigue testing,Matériaux métalliques — Essais de fatigue par flexion rotative de barreaux,2010-10-21,2,['77.040.1
• ISO 1144:19735685,IS,,ISO 1144:1973,Textiles — Universal system for designating linear density (Tex System),Textiles — Système universel de désignation de la masse linéique (système Tex),1973-1
• ISO 1147:19755689,IS,,ISO 1147:1975,Plastics — Aqueous dispersions of polymers and copolymers — Freeze-thaw cycle stability test,Matières plastiques — Dispersions aqueuses de polymères et copol
• ISO 1147:19885690,IS,,ISO 1147:1988,Plastics — Polymer dispersions — Freeze-thaw cycle stability test,Plastiques — Dispersions de polymères — Essai de stabilité à des alternances de gel et de d
• ISO 1148:19805691,IS,,ISO 1148:1980,Plastics — Aqueous dispersions of polymers and copolymers — Determination of pH,Plastiques — Dispersions aqueuses de polymères et de copolymères — Déterminat
• ISO 1150:19785694,IS,,ISO 1150:1978,Textile machinery and accessories — Closed-end drop wires for mechanical and electrical warp stop motions and automatic drawing-in machines,Matériel pour l'i
• ISO 1151-1:19855698,IS,,ISO 1151-1:1985,"Flight dynamics — Concepts, quantities and symbols — Part 1: Aircraft motion relative to the air","Mécanique du vol — Concepts, grandeurs et symboles — Pa
• ISO 1151-2:19745702,IS,,ISO 1151-2:1974,Terms and symbols for flight dynamics — Part 2: Motions of the aircraft and the atmosphere relative to the Earth,Termes et symboles de la mécanique du vol
• ISO 1151-2:19855703,IS,,ISO 1151-2:1985,"Flight dynamics — Concepts, quantities and symbols — Part 2: Motions of the aircraft and the atmosphere relative to the Earth","Mécanique du vol — Concept
• ISO 1151-2:1985/Add 1:19875704,IS,Add,ISO 1151-2:1985/Add 1:1987,"Flight dynamics — Concepts, quantities and symbols — Part 2: Motions of the aircraft and the atmosphere relative to the Earth — Addendum 1",
• ISO 1151-3:19725706,IS,,ISO 1151-3:1972,"Terms and symbols for flight dynamics — Part 3: Derivatives of forces, moments and their coefficients","Termes et symboles de la mécanique du vol — Partie
• ISO 1151-4:19745708,IS,,ISO 1151-4:1974,"Terms and symbols for flight dynamics — Part 4: Concepts, quantities and symbols used in the study of aircraft stability and control","Termes et symboles
• ISO 1151-4:1974/Add 1:19865710,IS,Add,ISO 1151-4:1974/Add 1:1986,"Terms and symbols for flight dynamics — Part 4: Concepts, quantities and symbols used in the study of aircraft stability and control — Adden
• ISO 1151-5:19745711,IS,,ISO 1151-5:1974,Terms and symbols for flight dynamics — Part 5: Quantities used in measurements,Termes et symboles de la mécanique du vol — Partie 5: Grandeurs utilisées d
• ISO 1151-5:19875712,IS,,ISO 1151-5:1987,"Flight dynamics — Concepts, quantities and symbols — Part 5: Quantities used in measurements","Mécanique du vol — Concepts, grandeurs et symboles — Partie
• ISO 1151-7:19855715,IS,,ISO 1151-7:1985,"Flight dynamics — Concepts, quantities and symbols — Part 7: Flight points and flight envelopes","Mécanique du vol — Concepts, grandeurs et symboles — Par
• ISO 1151-8:19925716,IS,,ISO 1151-8:1992,"Flight dynamics — Concepts, quantities and symbols — Part 8: Concepts and quantities used in the study of the dynamic behaviour of the aircraft","Mécaniqu
• ISO 1151-9:19935717,IS,,ISO 1151-9:1993,"Flight dynamics — Concepts, quantities and symbols — Part 9: Models of atmospheric motions along the trajectory of the aircraft","Mécanique du vol — Conce
• ISO 1151-9:1993/Amd 1:19985718,IS,Amd,ISO 1151-9:1993/Amd 1:1998,"Flight dynamics — Concepts, quantities and symbols — Part 9: Models of atmospheric motions along the trajectory of the aircraft — Amendment
• ISO 1151:19725696,IS,,ISO 1151:1972,Withdrawal of ISO 1151-1975,Annulation de l'ISO 1151-1975,1972-12-01,1,"['01.060','49.020']",ISO/TC 20,9599,,[5699],"['en','fr']",19
• ISO 1152:19745720,IS,,ISO 1152:1974,Withdrawal of ISO 1152-1974,Annulation de l'ISO 1152-1974,1974-12-01,1,"['01.060','49.020']",ISO/TC 20,9599,,[5703],['en'],5
• ISO 1153:19725721,IS,,ISO 1153:1972,Withdrawal of ISO 1153-1972,Annulation de l'ISO 1153-1972,1972-12-01,1,"['01.060','49.020']",ISO/TC 20,9599,,[5707],['en'],10
• ISO 1157:19755725,IS,,ISO 1157:1975,Plastics — Cellulose acetate in dilute solution — Determination of viscosity number and viscosity ratio,Matières plastiques — Acétate de cellulose en solutio
• ISO 1158:19785727,IS,,ISO 1158:1978,Plastics — Vinyl chloride homopolymers and copolymers — Determination of chlorine,Plastiques — Homopolymères et copolymères de chlorure de vinyle — Détermina
• ISO 1158:19845728,IS,,ISO 1158:1984,Plastics — Vinyl chloride homopolymers and copolymers — Determination of chlorine,Plastiques — Homopolymères et copolymères de chlorure de vinyle — Détermina
• ISO 1158:199826725,IS,,ISO 1158:1998,Plastics — Vinyl chloride homopolymers and copolymers — Determination of chlorine content,Plastiques — Homopolymères et copolymères de chlorure de vinyle —
• ISO 1161:19805731,IS,,ISO 1161:1980,Series 1 freight containers — Corner fittings — Specification,Conteneurs de la série 1 — Pièces de coin — Spécifications,1980-12-01,3,['55.180.10'],ISO/TC 10
• ISO 1161:19845732,IS,,ISO 1161:1984,Series 1 freight containers — Corner fittings — Specification,Conteneurs de la série 1 — Pièces de coin — Spécifications,1984-12-01,4,['55.180.10'],ISO/TC 10
• ISO 1161:1984/Amd 1:200744299,IS,Amd,ISO 1161:1984/Amd 1:2007,Series 1 freight containers — Corner fittings — Specification — Amendment 1: 45 ft containers,Conteneurs de la série 1 — Pièces de coin — Spéc
• ISO 1161:1984/Cor 1:19905733,IS,Cor,ISO 1161:1984/Cor 1:1990,Series 1 freight containers — Corner fittings — Specification — Technical Corrigendum 1,Conteneurs de la série 1 — Pièces de coin — Spécificati
• ISO 1162:19755734,IS,,ISO 1162:1975,Cereals and pulses — Method of test for infestation by X-ray examination,Céréales et légumineuses — Méthode de détection de l'infestation au moyen des rayons
• ISO 1163-1:19805735,IS,,ISO 1163-1:1980,Plastics — Unplasticized compounds of homopolymers and copolymers of vinyl chloride — Part 1: Designation,Plastiques — Compositions non plastifiées d'homop
• ISO 1163-1:19855736,IS,,ISO 1163-1:1985,Plastics — Unplasticized compounds of homopolymers and copolymers of vinyl chloride — Part 1: Designation,Plastiques — Compositions non plastifiées d'homop
• ISO 1163-1:199523984,IS,,ISO 1163-1:1995,Plastics — Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials — Part 1: Designation system and basis for specifications,Plastique
• ISO 1163-2:19805737,IS,,ISO 1163-2:1980,Plastics — Unplasticized compounds of homopolymers and copolymers of vinyl chloride — Part 2: Determination of properties,Plastiques — Compositions non pla
• ISO 1163-2:19955738,IS,,ISO 1163-2:1995,Plastics — Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of propert
• ISO 1167:19735742,IS,,ISO 1167:1973,Plastics pipes for the transport of fluids — Determination of the resistance to internal pressure,Tubes en matières plastiques pour le transport des fluides
• ISO 1167:19965743,IS,,ISO 1167:1996,Thermoplastics pipes for the conveyance of fluids — Resistance to internal pressure — Test method,Tubes en matières thermoplastiques pour le transport des fl
• ISO 1167:1996/Cor 1:199728712,IS,Cor,ISO 1167:1996/Cor 1:1997,Thermoplastics pipes for the conveyance of fluids — Resistance to internal pressure — Test method — Technical Corrigendum 1,Tubes en matières
• ISO 1169:19755745,IS,,ISO 1169:1975,Zinc alloys — Determination of aluminium content — Volumetric method,Alliages de zinc — Dosage de l'aluminium — Méthode titrimétrique,1975-06-01,1,['77.120.6
• ISO 1170:19775746,IS,,ISO 1170:1977,Coal and coke — Calculation of analyses to different bases,Charbon et coke — Calculs pour les analyses par rapport à différentes bases,1977-03-01,1,"['73.040
• ISO 1170:200841148,IS,,ISO 1170:2008,Coal and coke — Calculation of analyses to different bases,Charbon et coke — Calculs pour les analyses par rapport à différentes bases,2008-10-06,2,"['73.04
• ISO 1170:201362609,IS,,ISO 1170:2013,Coal and coke — Calculation of analyses to different bases,Charbon et coke — Calculs pour les analyses par rapport à différentes bases,2013-07-18,3,"['73.04
• ISO 1171:19815748,IS,,ISO 1171:1981,Solid mineral fuels — Determination of ash,Combustibles minéraux solides — Détermination des cendres,1981-10-01,2,['75.160.10'],ISO/TC 27/SC 5,9599,"[5485,46
• ISO 1171:19971626,IS,,ISO 1171:1997,Solid mineral fuels — Determination of ash,Combustibles minéraux solides — Détermination des cendres,1997-12-18,3,['75.160.10'],ISO/TC 27/SC 5,9599,[5748],[5
• ISO 1171:1997/Cor 1:199830956,IS,Cor,ISO 1171:1997/Cor 1:1998,Solid mineral fuels — Determination of ash — Technical Corrigendum 1,Combustibles minéraux solides — Détermination des cendres — Rectificatif
• ISO 1171:201055944,IS,,ISO 1171:2010,Solid mineral fuels — Determination of ash,Combustibles minéraux solides — Détermination des cendres,2010-06-04,4,['75.160.10'],ISO/TC 27/SC 5,9599,"[30956,
• ISO 1172:19755749,IS,,ISO 1172:1975,Textile glass reinforced plastics — Determination of loss on ignition,Matières plastiques renforcées au verre textile — Détermination de la perte au feu,1975
• ISO 1172:19965750,IS,,ISO 1172:1996,"Textile-glass-reinforced plastics — Prepregs, moulding compounds and laminates — Determination of the textile-glass and mineral-filler content — Calcination
• ISO 1173:19755753,IS,,ISO 1173:1975,Assembly tools for bolts and screws — Hexagon drive ends for power tools,Outils de manoeuvre pour vis et écrous — Hexagones conducteurs pour outils à machine
• ISO 1173:19885754,IS,,ISO 1173:1988,Assembly tools for bolts and screws — Hexagon drive ends for hand- and machine-operated screwdriver bits,Outils de manoeuvre pour vis et écrous — Hexagones c
• ISO 1174-1:199623590,IS,,ISO 1174-1:1996,Assembly tools for screws and nuts — Driving squares — Part 1: Driving squares for hand socket tools,Outils de manoeuvre pour vis et écrous — Carrés d'ent
• ISO 1174:19755756,IS,,ISO 1174:1975,Assembly tools for bolts and screws — Driving squares for power socket wrenches and hand socket wrenches,Outils de manoeuvre pour vis et écrous — Carrés d'en
• ISO 1174:1975/Amd 1:19815757,IS,Amd,ISO 1174:1975/Amd 1:1981,Assembly tools for bolts and screws — Driving squares for power socket wrenches and hand socket wrenches — Amendment 1,Outils de manoeuvre pour
• ISO 1176:19745759,IS,,ISO 1176:1974,Road vehicles — Weights — Vocabulary,Véhicules routiers — Poids — Vocabulaire,1974-11-01,1,"['43.020','01.040.43']",ISO/TC 22,9599,,[5760],"['en','fr']",6
• ISO 1177:19735761,IS,,ISO 1177:1973,Information processing — Character structure for start/stop and synchronous transmission,Traitement de l'information — Structure des caractères pour la trans
• ISO 1179-1:200741707,IS,,ISO 1179-1:2007,Connections for general use and fluid power — Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing — Part 1: Threaded por
• ISO 1179-2:200741708,IS,,ISO 1179-2:2007,Connections for general use and fluid power — Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing — Part 2: Heavy-duty (
• ISO 1179-2:201360889,IS,,ISO 1179-2:2013,Connections for general use and fluid power — Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing — Part 2: Heavy-duty (
• ISO 1179:19815764,IS,,ISO 1179:1981,"Pipe connections, threaded to ISO 228/1, for plain end steel and other metal tubes in industrial applications","Raccordements de tuyauteries, filetés selon
• ISO 1181:19735768,IS,,ISO 1181:1973,Three- or four-strand manila and sisal ropes,Cordages en manille et sisal à trois ou quatre torons,1973-09-01,1,['59.080.50'],ISO/TC 38,9599,,[5769],"['en','
• ISO 1181:19905769,IS,,ISO 1181:1990,Ropes — Manila and sisal — Specification,Cordages — Abaca (manille) et sisal — Spécifications,1990-11-01,2,['59.080.50'],ISO/TC 38,9599,[5768],[36582],"['en'
• ISO 1182:19835770,IS,,ISO 1182:1983,Fire tests — Building materials — Non-combustibility test,Essais au feu — Matériaux de construction — Essai de non-combustibilité,1983-12-01,2,['13.220.50'],
• ISO 1182:19905771,IS,,ISO 1182:1990,Fire tests — Building materials — Non-combustibility test,Essais au feu — Matériaux de construction — Essai de non-combustibilité,1990-12-06,3,['13.220.50'],
• ISO 1182:200227180,IS,,ISO 1182:2002,Reaction to fire tests for building products — Non-combustibility test,Essais de réaction au feu des produits de construction — Essai d'incombustibilité,20
• ISO 1182:201045779,IS,,ISO 1182:2010,Reaction to fire tests for products — Non-combustibility test,Essais de réaction au feu de produits — Essai d'incombustibilité,2010-04-29,5,['13.220.50'],I
• ISO 1183-1:200427790,IS,,ISO 1183-1:2004,"Plastics — Methods for determining the density of non-cellular plastics — Part 1: Immersion method, liquid pyknometer method and titration method","Plast
• ISO 1183-1:201255640,IS,,ISO 1183-1:2012,"Plastics — Methods for determining the density of non-cellular plastics — Part 1: Immersion method, liquid pyknometer method and titration method","Plast
• ISO 1183-1:201974990,IS,,ISO 1183-1:2019,"Plastics — Methods for determining the density of non-cellular plastics — Part 1: Immersion method, liquid pycnometer method and titration method","Plast
• ISO 1183-2:200429806,IS,,ISO 1183-2:2004,Plastics — Methods for determining the density of non-cellular plastics — Part 2: Density gradient column method,Plastiques — Méthodes de détermination de
• ISO 1183-2:201974991,IS,,ISO 1183-2:2019,Plastics — Methods for determining the density of non-cellular plastics — Part 2: Density gradient column method,Plastiques — Méthodes de détermination de
• ISO 1183:19875773,IS,,ISO 1183:1987,Plastics — Methods for determining the density and relative density of non-cellular plastics,Plastiques — Méthodes pour déterminer la masse volumique et la d
• ISO 1184:19835774,IS,,ISO 1184:1983,Plastics — Determination of tensile properties of films,Plastiques — Détermination des caractéristiques en traction des films,1983-08-01,1,['83.140'],ISO/TC
• ISO 1185:19755775,IS,,ISO 1185:1975,Road vehicles — Electrical connections between towing vehicles and towed vehicles with 24 V electrical equipment — Type 24 N (normal),Véhicules routiers — Li
• ISO 1185:19975776,IS,,ISO 1185:1997,Road vehicles — Electrical connections between towing and towed vehicles with 24 V systems — 7 pole connector type 24 N (normal),Véhicules routiers — Connexi
• ISO 1188:19745779,IS,,ISO 1188:1974,Cinematography — Recording characteristic for magnetic sound record on 16 mm motion-picture film — Specifications,Cinématographie — Caractéristique d'enregis
• ISO 1189:19755781,IS,,ISO 1189:1975,Cinematography — Recorded characteristic for magnetic sound records on 35 mm motion-picture film — Specifications,Cinématographie — Caractéristique d'enregis
• ISO 1191:19755786,IS,,ISO 1191:1975,Plastics — Polyethylenes and polypropylenes in dilute solution — Determination of viscosity number and of limiting viscosity number,Matières plastiques — Pol
• ISO 1193:19735787,IS,,ISO 1193:1973,Butter triers,Sondes à beurre,1973-06-01,1,['67.100.20'],ISO/TC 34/SC 5,9599,,[4916],"['en','fr']",2
• ISO 1194:19735788,IS,,ISO 1194:1973,Cheese triers,Sondes à fromage,1973-06-01,1,['67.100.30'],ISO/TC 34/SC 5,9599,,[4916],['en'],2
• ISO 1203:19745794,IS,,ISO 1203:1974,Photography — Roll film cameras — Back window location and picture sizes,Photographie — Appareils photographiques à pellicules — Emplacement du voyant de dér
• ISO 1203:19845795,IS,,ISO 1203:1984,Photography — Roll film cameras — Back window location and picture sizes,Photographie — Appareils photographiques à pellicules — Emplacement du voyant de dér
• ISO 1204:19725796,IS,,ISO 1204:1972,Reciprocating internal combustion engines — Designation of the direction of rotation,Moteurs alternatifs à combustion interne — Désignation du sens de rotati
• ISO 1205:19725798,IS,,ISO 1205:1972,Reciprocating internal combustion engines — Designation of the cylinders,Moteurs alternatifs à combustion interne — Désignation des cylindres,1972-04-01,1,['
• ISO 1206:19825799,IS,,ISO 1206:1982,Needle roller bearings — Light and medium series — Dimensions and tolerances,Roulements à aiguilles — Séries légère et moyenne — Dimensions et tolérances,198
• ISO 1206:200130241,IS,,ISO 1206:2001,"Rolling bearings — Needle roller bearings, dimension series 48, 49 and 69 — Boundary dimensions and tolerances","Roulements — Roulements à aiguilles, série
• ISO 1206:2001/Amd 1:201354726,IS,Amd,ISO 1206:2001/Amd 1:2013,"Rolling bearings — Needle roller bearings, dimension series 48, 49 and 69 — Boundary dimensions and tolerances — Amendment 1: Tolerances for
• ISO 1206:201865934,IS,,ISO 1206:2018,"Rolling bearings — Needle roller bearings with machined rings — Boundary dimensions, geometrical product specifications (GPS) and tolerance values","Roulem
• ISO 1207:19835800,IS,,ISO 1207:1983,Slotted cheese head screws — Product grade A,"Vis à métaux à tête cylindrique, fendue — Grade A",1983-07-01,1,['21.060.10'],ISO/TC 2,9599,,[5801],"['en','fr'
• ISO 1207:19925801,IS,,ISO 1207:1992,Slotted cheese head screws — Product grade A,Vis à métaux à tête cylindrique fendue — Grade A,1992-05-14,2,['21.060.10'],ISO/TC 2/SC 11,9599,[5800],[54039],"
• ISO 1209-1:19905804,IS,,ISO 1209-1:1990,"Cellular plastics, rigid — Flexural tests — Part 1: Bending test",Plastiques alvéolaires rigides — Essais de flexion — Partie 1: Essai de flexion,1990-10-
• ISO 1209-1:200434844,IS,,ISO 1209-1:2004,Rigid cellular plastics — Determination of flexural properties — Part 1: Basic bending test,Plastiques alvéolaires rigides — Détermination des propriétés
• ISO 1209-2:19905806,IS,,ISO 1209-2:1990,"Cellular plastics, rigid — Flexural tests — Part 2: Determination of flexural properties",Plastiques alvéolaires rigides — Essais de flexion — Partie 2: D
• ISO 1209-2:200434843,IS,,ISO 1209-2:2004,Rigid cellular plastics — Determination of flexural properties — Part 2: Determination of flexural strength and apparent flexural modulus of elasticity,Pl
• ISO 1209:19765803,IS,,ISO 1209:1976,Rigid cellular plastics — Bending test,Matières plastiques alvéolaires rigides — Essai de flexion,1976-08-01,1,['83.100'],ISO/TC 61,9599,,"[5806,5804]","['en
• ISO 1210:19825807,IS,,ISO 1210:1982,Plastics — Determination of flammability characteristics of plastics in the form of small specimens in contact with a small flame,Plastiques — Détermination
• ISO 1210:19925808,IS,,ISO 1210:1992,Plastics — Determination of the burning behaviour of horizontal and vertical specimens in contact with a small-flame ignition source,Plastiques — Déterminati
• ISO 1211:19845810,IS,,ISO 1211:1984,Milk — Determination of fat content — Gravimetric method (Reference method),Lait — Détermination de la teneur en matière grasse — Méthode gravimétrique (Méth
• ISO 1211:199926906,IS,,ISO 1211:1999,Milk — Determination of fat content — Gravimetric method (Reference method),Lait — Détermination de la teneur en matière grasse — Méthode gravimétrique (Mét
• ISO 1211:201051348,IS,,ISO 1211:2010,Milk — Determination of fat content — Gravimetric method (Reference method),Lait — Détermination de la teneur en matière grasse — Méthode gravimétrique (Mét
• ISO 1212:19765811,IS,,ISO 1212:1976,Apples — Guide to cold storage,Pommes — Guide pour l'entreposage par réfrigération,1976-03-01,1,['67.080.10'],ISO/TC 34,9599,,[5812],"['en','fr']",6
• ISO 1213-1:19825813,IS,,ISO 1213-1:1982,Solid mineral fuels — Vocabulary — Part 1: Terms relating to coal preparation,Combustibles minéraux solides — Vocabulaire — Partie 1: Termes relatifs à la
• ISO 1213-1:19935814,IS,,ISO 1213-1:1993,Solid mineral fuels — Vocabulary — Part 1: Terms relating to coal preparation,Combustibles minéraux solides — Vocabulaire — Partie 1: Termes relatifs à la
• ISO 1213-2:19925817,IS,,ISO 1213-2:1992,"Solid mineral fuels — Vocabulary — Part 2: Terms relating to sampling, testing and analysis","Combustibles minéraux solides — Vocabulaire — Partie 2: Term
• ISO 1213-2:201661543,IS,,ISO 1213-2:2016,"Solid mineral fuels — Vocabulary — Part 2: Terms relating to sampling, testing and analysis","Combustibles minéraux solides — Vocabulaire — Partie 2: Ter
• ISO 1215:19805822,IS,,ISO 1215:1980,"Commercially dry virgin cork, ramassage, gleanings, corkwood refuse and corkwaste — Definitions and packaging","Liège mâle, liège de ramassage, liège gisant
• ISO 1215:19865823,IS,,ISO 1215:1986,"Commercially dry virgin cork, ramassage, gleanings, corkwood refuse and corkwaste — Definitions and packaging","Liège mâle, liège de ramassage, liège gisant
• ISO 1216:19795824,IS,,ISO 1216:1979,"Commercially dry corkwood in planks — Definitions, classification and packaging","Liège en planches commercialement sec — Définitions, classification et emb
• ISO 1216:19905825,IS,,ISO 1216:1990,"Corkwood in planks — Grading, classification and packing","Liège en planches — Calibrage, classification et emballage",1990-11-15,2,['79.100'],ISO/TC 87,959
• ISO 1216:199827299,IS,,ISO 1216:1998,"Corkwood in planks — Grading, classification and packing","Liège en planches — Calibrage, classification et emballage",1998-12-20,3,['79.100'],ISO/TC 87,95
• ISO 1217:19755826,IS,,ISO 1217:1975,Displacement compressors — Acceptance tests,Compresseurs volumétriques — Essais de réception,1975-04-01,1,['23.140'],ISO/TC 118,9599,,[5827],"['en','fr']",84
• ISO 1217:1975/Amd 1:19885828,IS,Amd,ISO 1217:1975/Amd 1:1988,Displacement compressors — Acceptance tests — Amendment 1,Compresseurs volumétriques — Essais de réception — Amendement 1,1988-06-23,1,['23.140
• ISO 1217:19865827,IS,,ISO 1217:1986,Displacement compressors — Acceptance tests,Compresseurs volumétriques — Essais de réception,1986-07-31,2,['23.140'],ISO/TC 118,9599,"[5826,5828]",[23682],"[
• ISO 1217:199623682,IS,,ISO 1217:1996,Displacement compressors — Acceptance tests,Compresseurs volumétriques — Essais de réception,1996-09-26,3,['23.140'],ISO/TC 118/SC 6,9599,[5827],[44769],"['
• ISO 1218:19755830,IS,,ISO 1218:1975,Plastics — Polyamides — Determination of 'melting point',Matières plastiques — Polyamides — Détermination du 'point de fusion',1975-06-01,1,['83.080.20'],ISO
• ISO 1219-1:19915832,IS,,ISO 1219-1:1991,Fluid power systems and components — Graphic symbols and circuit diagrams — Part 1: Graphic symbols,Transmissions hydrauliques et pneumatiques — Symboles g
• ISO 1219-1:200643237,IS,,ISO 1219-1:2006,Fluid power systems and components — Graphic symbols and circuit diagrams — Part 1: Graphic symbols for conventional use and data-processing applications,
• ISO 1219-2:19955833,IS,,ISO 1219-2:1995,Fluid power systems and components — Graphic symbols and circuit diagrams — Part 2: Circuit diagrams,Transmissions hydrauliques et pneumatiques — Symboles
• ISO 1222:19735835,IS,,ISO 1222:1973,Photography — Tripod connections,Photographie — Raccords de pied,1973-09-01,1,['37.040.10'],ISO/TC 42,9599,,[5836],"['en','fr']",2
• ISO 1222:19875836,IS,,ISO 1222:1987,Photography — Tripod connections,Photographie — Pièces d'assemblage d'un appareil photographique sur un pied,1987-11-19,2,['37.040.10'],ISO/TC 42,9599,[5835]
• ISO 1222:200333323,IS,,ISO 1222:2003,Photography — Tripod connections,Photographie — Pièces d'assemblage d'un appareil photographique sur un pied,2003-03-03,3,['37.040.10'],ISO/TC 42,9599,[5836
• ISO 1222:2003/Cor 1:200339007,IS,Cor,ISO 1222:2003/Cor 1:2003,Photography — Tripod connections — Technical Corrigendum 1,Photographie — Pièces d'assemblage d'un appareil photographique sur un pied — Recti
• ISO 1223:19815837,IS,,ISO 1223:1981,Cinematography — Picture areas for motion-picture films and slides for television — Position and dimensions,Cinématographie — Champs d'image pour films et di
• ISO 1223:19855838,IS,,ISO 1223:1985,Cinematography — Picture areas for motion- picture films and slides for television — Position and dimensions,Cinematographie — Champs d'image pour films et d
• ISO 1223:19935839,IS,,ISO 1223:1993,Cinematography — Picture areas for motion-picture films and slides for television — Position and dimensions,Cinématographie — Champs d'image pour films et di
• ISO 1224:19845841,IS,,ISO 1224:1984,Rolling bearings — Instrument precision bearings,Roulements — Roulements de précision pour instruments,1984-10-01,1,['21.100.20'],ISO/TC 4,9599,,"[43723,4372
• ISO 1227:19795843,IS,,ISO 1227:1979,"Starch, including derivatives and by-products — Vocabulary","Amidons, fécules, dérivés et sous-produits — Vocabulaire",1979-06-01,2,"['67.180.20','01.040.67
• ISO 1228:19755845,IS,,ISO 1228:1975,Plastics — Poly(ethylene terephthalate) in dilute solution — Determination of viscosity number,Matières plastiques — Poly(éthylène téréphtalate) en solution
• ISO 1229:19725846,IS,,ISO 1229:1972,Photography — Expendable photoflash lamps — Determination of the light output,Photographie — Lampes à éclairs à combustion — Détermination de l'émission lumi
• ISO 1230:19735848,IS,,ISO 1230:1973,Photography — Determination of flash guide numbers,Photographie — Détermination des nombres-guides des appareils à éclairs,1973-06-01,1,['37.040.10'],ISO/TC
• ISO 1230:19925849,IS,,ISO 1230:1992,Photography — Determination of flash guide numbers,Photographie — Détermination des nombres-guides des appareils à éclairs,1992-02-27,2,['37.040.10'],ISO/TC
• ISO 1233:19755852,IS,,ISO 1233:1975,Plastics — Determination of viscosity number of methyl methacrylate polymers and copolymers in dilute solution,Matières plastiques — Détermination de l'indic
• ISO 1234:19765853,IS,,ISO 1234:1976,Split pins — Metric series,Goupilles fendues — Série métrique,1976-04-01,1,['21.060.50'],ISO/TC 2,9599,,[20000],"['en','fr']",2
• ISO 1241:19805856,IS,,ISO 1241:1980,Essential oils — Determination of ester value after acetylation and evaluation of free alcohols and total alcohols content,Huiles essentielles — Déterminatio
• ISO 1242:19735858,IS,,ISO 1242:1973,Essential oils — Determination of the acid value,Huiles essentielles — Détermination de l'indice d'acide,1973-12-01,1,['71.100.60'],ISO/TC 54,9599,,[25313],"
• ISO 1242:199925313,IS,,ISO 1242:1999,Essential oils — Determination of acid value,Huiles essentielles — Détermination de l'indice d'acide,1999-10-21,2,['71.100.60'],ISO/TC 54,9599,[5858],"[7727
• ISO 1247:19745859,IS,,ISO 1247:1974,Aluminium pigments for paints,Pigments d'aluminium pour peintures,1974-09-01,1,['87.060.10'],ISO/TC 256,9599,,"[75151,77127]","['en','fr']",12
• ISO 1247:1974/Amd 1:19825860,IS,Amd,ISO 1247:1974/Amd 1:1982,Aluminium pigments for paints — Amendment 1,Pigments d'aluminium pour peintures — Amendement 1,1982-11-01,1,['87.060.10'],ISO/TC 256,9599,,"[75
• ISO 1248:19745861,IS,,ISO 1248:1974,Iron oxide pigments for paints,Pigments à base d'oxydes de fer pour peintures,1974-07-01,1,['87.060.10'],ISO/TC 256,9599,,"[38752,5862]","['en','fr']",6
• ISO 1265:19795867,IS,,ISO 1265:1979,Plastics — Polyvinyl chloride resins — Determination of number of impurities and foreign particles,Plastiques — Résines de polychlorure de vinyle — Détermina
• ISO 1268:19745869,IS,,ISO 1268:1974,"Plastics — Preparation of glass fibre reinforced, resin bonded, low-pressure laminated plates or panels for test purposes",Matières plastiques — Préparation
• ISO 1269:19805870,IS,,ISO 1269:1980,Plastics — Homopolymer and copolymer resins of vinyl chloride — Determination of volatile matter (including water),Plastiques — Résines d'homopolymères et de
• ISO 1270:19755871,IS,,ISO 1270:1975,Plastics — PVC resins — Determination of ash and sulphated ash,Matières plastiques — Résines de polychlorure de vinyle — Détermination des cendres et des cen
• ISO 1272:19735873,IS,,ISO 1272:1973,Essential oils — Determination of phenols content,Huiles essentielles — Évaluation de la teneur en phénols,1973-12-01,1,['71.100.60'],ISO/TC 54,9599,,[25314]
• ISO 1275:19725874,IS,,ISO 1275:1972,Extended pitch precision roller chains and chain wheels for transmission and conveyors,"Chaînes de précision à rouleaux à pas long et roues dentées correspon
• ISO 1275:1972/Amd 1:19825877,IS,Amd,ISO 1275:1972/Amd 1:1982,Extended pitch precision roller chains and chain wheels for transmission and conveyors — Amendment 1,"Chaînes de précision à rouleaux à pas lon
• ISO 1275:19845875,IS,,ISO 1275:1984,Extended pitch precision roller chains and chain wheels for transmission and conveyors,"Chaînes de précision à rouleaux à pas long et roues dentées correspon
• ISO 1275:19955876,IS,,ISO 1275:1995,Double-pitch precision roller chains and sprockets for transmission and conveyors,Chaînes de précision à rouleaux à pas double et roues dentées pour transmis
• ISO 1279:19735878,IS,,ISO 1279:1973,Essential oils — Determination of carbonyl compounds content — Hydroxylammonium chloride method,Huiles essentielles — Détermination de la teneur en constitua
• ISO 1279:19845879,IS,,ISO 1279:1984,Essential oils — Determination of carbonyl value — Hydroxylammonium chloride method,Huiles essentielles — Détermination de l'indice de carbonyle — Méthode au
• ISO 1302:19785882,IS,,ISO 1302:1978,Technical drawings — Method of indicating surface texture on drawings,Dessins techniques — Indication des états de surface sur les dessins,1978-09-01,2,"['17
• ISO 1302:19925883,IS,,ISO 1302:1992,Technical drawings — Method of indicating surface texture,Dessins techniques — Indication des états de surface,1992-10-29,3,"['17.040.20','01.100.20']",ISO/T
• ISO 1302:200228089,IS,,ISO 1302:2002,Geometrical Product Specifications (GPS) — Indication of surface texture in technical product documentation,Spécification géométrique des produits (GPS) — I
• ISO 1304:19745884,IS,,ISO 1304:1974,Carbon black for use in the rubber industry — Determination of iodine adsorption number,Noir de carbone destiné à l'industrie des élastomères — Détermination
• ISO 1304:19855885,IS,,ISO 1304:1985,Rubber compounding ingredients — Carbon black — Determination of iodine adsorption number — Titrimetric method,Ingrédients de mélange du caoutchouc — Noir de
• ISO 1304:199927009,IS,,ISO 1304:1999,Rubber compounding ingredients — Carbon black — Determination of iodine adsorption number — Titrimetric method,Ingrédients de mélange du caoutchouc — Noir d
• ISO 1304:200640162,IS,,ISO 1304:2006,Rubber compounding ingredients — Carbon black — Determination of iodine adsorption number,Ingrédients de mélange du caoutchouc — Noir de carbone — Détermina
• ISO 1306:19815886,IS,,ISO 1306:1981,Rubber compounding ingredients — Carbon black (pelletized) — Determination of pour density,Ingrédients de mélange du caoutchouc — Noir de carbone (en granule
• ISO 1306:19875887,IS,,ISO 1306:1987,Rubber compounding ingredients — Carbon black (pelletized) — Determination of pour density,Ingrédients de mélange du caoutchouc — Noir de carbone (en granule
• ISO 1307:19755888,IS,,ISO 1307:1975,Withdrawal of ISO 1307-1975,Annulation de l'ISO 1307-1975,1975-06-01,1,['23.040.70'],ISO/TC 45/SC 1,9599,,"[5889,14598]","['en','fr']",1
• ISO 1307:19835889,IS,,ISO 1307:1983,Rubber and plastics hoses — Bore diameters and tolerances on length,Tuyaux en caoutchouc et plastique — Diamètres intérieurs et tolérances sur la longueur,19
• ISO 1307:19925890,IS,,ISO 1307:1992,"Rubber and plastics hoses for general-purpose industrial applications — Bore diameters and tolerances, and tolerances on length","Tuyaux en caoutchouc et en
• ISO 1310:19745891,IS,,ISO 1310:1974,Carbon black for use in the rubber industry — Sampling packaged shipments,Noir de carbone livré en sacs pour l'industrie des élastomères — Échantillonnage,19
• ISO 1324:19855893,IS,,ISO 1324:1985,Solid wood parquet — Classification of oak strips,Parquet en bois massif — Classification des lames en chêne,1985-05-30,1,['79.080'],ISO/TC 218,9599,,[80116]
• ISO 1328-1:19955899,IS,,ISO 1328-1:1995,Cylindrical gears — ISO system of accuracy — Part 1: Definitions and allowable values of deviations relevant to corresponding flanks of gear teeth,Engrenag
• ISO 1328-2:19975900,IS,,ISO 1328-2:1997,Cylindrical gears — ISO system of accuracy — Part 2: Definitions and allowable values of deviations relevant to radial composite deviations and runout info
• ISO 1328:19755898,IS,,ISO 1328:1975,Parallel involute gears — ISO system of accuracy,Engrenages parallèles à développante — Système ISO de précision,1975-02-01,3,['21.200'],ISO/TC 60,9599,[5897
• ISO 1342:19885908,IS,,ISO 1342:1988,Oil of rosemary (Rosmarinus officinalis Linnaeus),Huile essentielle de romarin (Rosmarinus officinalis Linnaeus),1988-12-15,1,['71.100.60'],ISO/TC 54,9599,[5
• ISO 1342:200025315,IS,,ISO 1342:2000,Oil of rosemary (Rosmarinus officinalis L.),Huile essentielle de romarin (Rosmarinus officinalis L.),2000-11-02,2,['71.100.60'],ISO/TC 54,9599,[5908],[56521
• ISO 1346:19755909,IS,,ISO 1346:1975,Ropes and cordage — Three-strand (hawser-laid) and eight-strand (plaited) polypropylene monofilament or film ropes — Required characteristics,Cordages en mon
• ISO 1346:19905910,IS,,ISO 1346:1990,Ropes — Polypropylene — Specification,Cordages — Polypropylène — Spécifications,1990-11-01,2,['59.080.50'],ISO/TC 38,9599,[5909],[36583],"['en','fr']",4
• ISO 1346:200436583,IS,,ISO 1346:2004,"Fibre ropes — Polypropylene split film, monofilament and multifilament (PP2) and polypropylene high tenacity multifilament (PP3) — 3-, 4- and 8-strand rope
• ISO 1346:201256632,IS,,ISO 1346:2012,"Fibre ropes — Polypropylene split film, monofilament and multifilament (PP2) and polypropylene high-tenacity multifilament (PP3) — 3-, 4-, 8- and 12-strand
• ISO 1352:19775911,IS,,ISO 1352:1977,Steel — Torsional stress fatigue testing,Acier — Essais de fatigue par contrainte de torsion,1977-12-01,1,['77.040.10'],ISO/TC 164,9599,,[42814],"['en','fr']
• ISO 1352:201142814,IS,,ISO 1352:2011,Metallic materials — Torque-controlled fatigue testing,Matériaux métalliques — Essais de fatigue par couple de torsion commandé,2011-04-12,2,['77.040.10'],I
• ISO 1355:19895913,IS,,ISO 1355:1989,"Metallic materials — Hardness test — Calibration of standardized blocks to be used for Rockwell superficial hardness testing machines (scales 15N, 30N, 45N,
• ISO 1361:19835914,IS,,ISO 1361:1983,Light gauge metal containers — Open-top cans — Round cans — Internal diameters,Récipients métalliques légers — Boîtes serties — Boîtes rondes — Diamètres int
• ISO 1382:19825915,IS,,ISO 1382:1982,Rubber — Vocabulary,Caoutchouc — Vocabulaire,1982-10-01,2,"['83.060','01.040.83']",ISO/TC 45,9599,,[21815],"['en','fr','ru']",28
• ISO 1382:1982/Add 1:19825916,IS,Add,ISO 1382:1982/Add 1:1982,Rubber — Vocabulary — Addendum 1,Caoutchouc — Vocabulaire — Additif 1,1982-05-01,2,"['83.060','01.040.83']",ISO/TC 45,9599,,[21815],"['en','fr'
• ISO 1382:1982/Add 9:19875924,IS,Add,ISO 1382:1982/Add 9:1987,Rubber — Vocabulary — Addendum 9,Caoutchouc — Vocabulaire — Additif 9,1987-06-18,2,"['83.060','01.040.83']",ISO/TC 45,9599,,[5925],"['en','fr',
• ISO 1382:1982/Amd 1:19865926,IS,Amd,ISO 1382:1982/Amd 1:1986,Rubber — Vocabulary — Amendment 1,Caoutchouc — Vocabulaire — Amendement 1,1986-05-01,2,"['83.060','01.040.83']",ISO/TC 45,9599,,[21815],"['en',
• ISO 1382:199621815,IS,,ISO 1382:1996,Rubber — Vocabulary,Caoutchouc — Vocabulaire,1996-08-15,3,"['83.060','01.040.83']",ISO/TC 45,9599,"[5926,5915,5916]",[34800],"['en','fr','ru']",73
• ISO 1382:200234800,IS,,ISO 1382:2002,Rubber — Vocabulary,Caoutchouc — Vocabulaire,2002-10-10,4,"['83.060','01.040.83']",ISO/TC 45,9599,"[21815,23791]","[42042,38802]","['en','fr','ru']",88
• ISO 1382:200842042,IS,,ISO 1382:2008,Rubber — Vocabulary,Caoutchouc — Vocabulaire,2008-04-02,5,"['83.060','01.040.83']",ISO/TC 45,9599,[34800],[60252],"['en','fr']",80
• ISO 1382:201260252,IS,,ISO 1382:2012,Rubber — Vocabulary,Caoutchouc — Vocabulaire,2012-10-08,6,"['83.060','01.040.83']",ISO/TC 45,9599,[42042],[68018],"['en','fr','ru']",118
• ISO 1382:202068018,IS,,ISO 1382:2020,Rubber — Vocabulary,Caoutchouc — Vocabulaire,2020-10-28,7,"['83.060','01.040.83']",ISO/TC 45,9599,[60252],[88693],"['en','fr']",67
• ISO 1395:19775980,IS,,ISO 1395:1977,Short pitch transmission precision bush chains and chain wheels,"Chaînes de transmission de précision à douilles, à pas court, et roues dentées correspondant
• ISO 1395:1977/Amd 1:19825981,IS,Amd,ISO 1395:1977/Amd 1:1982,Short pitch transmission precision bush chains and chain wheels — Amendment 1,"Chaînes de transmission de précision à douilles, à pas court, et
• ISO 1396:19755982,IS,,ISO 1396:1975,Vulcanized and unvulcanized compounded rubber — Determination of copper content — Zinc diethyldithiocarbamate photometric method,Mélanges à base de caoutchou
• ISO 1397:19755983,IS,,ISO 1397:1975,Compounded rubber — Determination of manganese content — Sodium periodate photometric method,Mélanges à base de caoutchoucs — Dosage du manganèse — Méthode p
• ISO 1399:19825985,IS,,ISO 1399:1982,"Rubber, vulcanized — Determination of permeability to gases — Constant volume method",Caoutchouc vulcanisé — Détermination de la perméabilité aux gaz — Méth
• ISO 1400:19755986,IS,,ISO 1400:1975,Vulcanized rubbers of high hardness (85 to 100 IRHD) — Determination of hardness,Caoutchoucs vulcanisés de haute dureté (85 à 100 D.I.D.C) — Détermination de
• ISO 1401:19875988,IS,,ISO 1401:1987,Rubber hoses for agricultural spraying,Tuyaux en caoutchouc pour pulvérisation agricole,1987-10-15,1,"['83.140.40','65.060.40']",ISO/TC 45/SC 1,9599,[5987],[
• ISO 1401:199921871,IS,,ISO 1401:1999,Rubber hoses for agricultural spraying,Tuyaux en caoutchouc pour pulvérisation agricole,1999-12-02,2,"['83.140.40','65.060.40','65.060.25']",ISO/TC 45/SC 1,
• ISO 1402:19745989,IS,,ISO 1402:1974,Rubber hose — Hydrostatic testing,Tuyaux en élastomères — Essais hydrostatiques,1974-07-01,1,['23.040.70'],ISO/TC 45,9599,,"[5990,5991]","['en','fr']",3
• ISO 1402:19845990,IS,,ISO 1402:1984,Rubber and plastics hoses and hose assemblies — Hydrostatic testing,Tuyaux et flexibles en caoutchouc et en plastique — Essais hydrostatiques,1984-12-01,2,['
• ISO 1402:19945991,IS,,ISO 1402:1994,Rubber and plastics hoses and hose assemblies — Hydrostatic testing,Tuyaux et flexibles en caoutchouc et en plastique — Essais hydrostatiques,1994-11-24,3,['
• ISO 1402:200945391,IS,,ISO 1402:2009,Rubber and plastics hoses and hose assemblies — Hydrostatic testing,Tuyaux et flexibles en caoutchouc et en plastique — Essais hydrostatiques,2009-10-09,4,[
• ISO 1403:19765992,IS,,ISO 1403:1976,General purpose rubber water hose,Tuyaux à eau en caoutchouc pour usages généraux,1976-10-01,1,['23.040.70'],ISO/TC 45,9599,,"[5993,5994]","['en','fr']",2
• ISO 1403:19865993,IS,,ISO 1403:1986,"Rubber hoses for water, general purpose — Specification","Tuyaux en caoutchouc pour l'eau, à usages généraux — Spécifications",1986-06-12,2,['23.040.70'],IS
• ISO 1403:19955994,IS,,ISO 1403:1995,"Rubber hoses, textile-reinforced, for general-purpose water applications — Specification",Tuyaux en caoutchouc à armature textile d'usage général pour l'eau
• ISO 1403:200537226,IS,,ISO 1403:2005,"Rubber hoses, textile-reinforced, for general-purpose water applications — Specification",Tuyaux en caoutchouc à armature textile d'usage général pour l'ea
• ISO 1407:19765996,IS,,ISO 1407:1976,Rubber — Determination of solvent extract,Caoutchouc — Détermination de l'extrait par les solvants,1976-10-01,1,['83.060'],ISO/TC 45,9599,,[5997],"['en','fr'
• ISO 1407:19925997,IS,,ISO 1407:1992,Rubber — Determination of solvent extract,Caoutchouc — Détermination de l'extrait par les solvants,1992-05-07,2,['83.060'],ISO/TC 45/SC 2,9599,[5996],[42242]
• ISO 1407:1992/Cor 1:200745561,IS,Cor,ISO 1407:1992/Cor 1:2007,Rubber — Determination of solvent extract — Technical Corrigendum 1,Caoutchouc — Détermination de l'extrait par les solvants — Rectificatif te
• ISO 1407:200942242,IS,,ISO 1407:2009,Rubber — Determination of solvent extract,Caoutchouc — Détermination de l'extrait par les solvants,2009-06-18,3,['83.060'],ISO/TC 45/SC 2,9599,"[5997,45561]
• ISO 1407:201151794,IS,,ISO 1407:2011,Rubber — Determination of solvent extract,Caoutchouc — Détermination de l'extrait par les solvants,2011-11-25,4,['83.060'],ISO/TC 45/SC 2,9599,[42242],[8413
• ISO 1408:19765998,IS,,ISO 1408:1976,Vulcanized rubber — Determination of carbon black content — Pyrolytic method,Caoutchouc vulcanisé — Détermination de la teneur en noir de carbone — Méthode p
• ISO 1408:19875999,IS,,ISO 1408:1987,Rubber — Determination of carbon black content — Pyrolytic and chemical degradation methods,Caoutchouc — Détermination de la teneur en noir de carbone — Méth
• ISO 1409:19836000,IS,,ISO 1409:1983,Rubber latex — Determination of surface tension,Latex de caoutchouc — Détermination de la tension superficielle,1983-11-01,3,['83.040.10'],ISO/TC 45/SC 3,959
• ISO 1409:19956001,IS,,ISO 1409:1995,Plastics/rubber — Polymer dispersions and rubber latices (natural and synthetic) — Determination of surface tension by the ring method,Plastiques/caoutchouc
• ISO 1409:200643680,IS,,ISO 1409:2006,Plastics/rubber — Polymer dispersions and rubber latices (natural and synthetic) — Determination of surface tension by the ring method,Plastiques/caoutchouc
• ISO 1413:19736002,IS,,ISO 1413:1973,Shock-resistant wristwatches,Montres-bracelet résistant aux chocs,1973-09-01,1,['39.040.10'],ISO/TC 114/SC 1,9599,,[6003],"['en','fr']",3
• ISO 1413:19846003,IS,,ISO 1413:1984,Horology — Shock-resistant watches,Horlogerie — Montres résistant aux chocs,1984-04-01,2,['39.040.10'],ISO/TC 114/SC 1,9599,[6002],[62753],"['en','fr']",3
• ISO 1419:19776005,IS,,ISO 1419:1977,Fabrics coated with rubber or plastics — Accelerated ageing and simulated service tests,Supports textiles revêtus de caoutchouc ou de plastique — Essais de v
• ISO 1419:19956006,IS,,ISO 1419:1995,Rubber- or plastics-coated fabrics — Accelerated-ageing tests,Supports textiles revêtus de caoutchouc ou de plastique — Essais de vieillissement accéléré,199
• ISO 1419:201870221,IS,,ISO 1419:2018,Rubber- or plastics-coated fabrics — Accelerated-ageing tests,Supports textiles revêtus de caoutchouc ou de plastique — Essais de vieillissement accéléré,20
• ISO 1420:19786007,IS,,ISO 1420:1978,Rubber or plastics coated fabric — Determination of resistance to penetration by water,Supports textiles revêtus de caoutchouc ou de plastique — Déterminatio
• ISO 1420:19876008,IS,,ISO 1420:1987,Rubber- or plastics-coated fabrics — Determination of resistance to penetration by water,Supports textiles revêtus de caoutchouc ou de plastique — Déterminat
• ISO 1420:200130359,IS,,ISO 1420:2001,Rubber- or plastics-coated fabrics — Determination of resistance to penetration by water,Supports textiles revêtus de caoutchouc ou de plastique — Détermina
• ISO 1421:19776009,IS,,ISO 1421:1977,Fabrics coated with rubber or plastics — Determination of breaking strength and elongation at break,Supports textiles revêtus de caoutchouc ou de plastique —
• ISO 1421:19982146,IS,,ISO 1421:1998,Rubber- or plastics-coated fabrics — Determination of tensile strength and elongation at break,Supports textiles revêtus de caoutchouc ou de plastique — Déte
• ISO 1431-1:19806014,IS,,ISO 1431-1:1980,Rubber vulcanized — Resistance to ozone cracking — Part 1: Static strain test,Caoutchouc vulcanisé — Résistance au craquelage par l'ozone — Partie 1: Essai
• ISO 1431-1:1980/Amd 1:19826016,IS,Amd,ISO 1431-1:1980/Amd 1:1982,Rubber vulcanized — Resistance to ozone cracking — Part 1: Static strain test — Amendment 1,Caoutchouc vulcanisé — Résistance au craquelage p
• ISO 1431-1:19896015,IS,,ISO 1431-1:1989,"Rubber, vulcanized or thermoplastic — Resistance to ozone cracking — Part 1: Static strain test",Caoutchouc vulcanisé ou thermoplastique — Résistance au c
• ISO 1431-1:200437030,IS,,ISO 1431-1:2004,"Rubber, vulcanized or thermoplastic — Resistance to ozone cracking — Part 1: Static and dynamic strain testing",Caoutchouc vulcanisé ou thermoplastique —
• ISO 1431-1:2004/Amd 1:200946585,IS,Amd,ISO 1431-1:2004/Amd 1:2009,"Rubber, vulcanized or thermoplastic — Resistance to ozone cracking — Part 1: Static and dynamic strain testing — Amendment 1",Caoutchouc vu
• ISO 1431-1:201255604,IS,,ISO 1431-1:2012,"Rubber, vulcanized or thermoplastic — Resistance to ozone cracking — Part 1: Static and dynamic strain testing",Caoutchouc vulcanisé ou thermoplastique —
• ISO 1431-1:202280466,IS,,ISO 1431-1:2022,"Rubber, vulcanized or thermoplastic — Resistance to ozone cracking — Part 1: Static and dynamic strain testing",Caoutchouc vulcanisé ou thermoplastique —
• ISO 1431-2:19826017,IS,,ISO 1431-2:1982,"Rubber, vulcanized — Resistance to ozone cracking — Part 2: Dynamic strain test",Caoutchouc vulcanisé — Résistance au craquelage par l'ozone — Partie 2: E
• ISO 1431-2:19946018,IS,,ISO 1431-2:1994,"Rubber, vulcanized or thermoplastic — Resistance to ozone cracking — Part 2: Dynamic strain test",Caoutchouc vulcanisé ou thermoplastique — Résistance au
• ISO 1431-3:20006019,IS,,ISO 1431-3:2000,"Rubber, vulcanized or thermoplastic — Resistance to ozone cracking — Part 3: Reference and alternative methods for determining the ozone concentration in
• ISO 1431:19726013,IS,,ISO 1431:1972,Withdrawal of ISO 1431-1972,Annulation de l'ISO 1431-1972,1972-09-01,1,['83.060'],ISO/TC 45/SC 2,9599,,[6015],"['en','fr']",4
• ISO 1432:19826020,IS,,ISO 1432:1982,"Rubber, vulcanized — Low temperature stiffening (Gehman test) — Determination",Caoutchouc vulcanisé — Rigidité à basse température (essai Gehman) — Détermin
• ISO 1432:19886021,IS,,ISO 1432:1988,"Rubber, vulcanized or thermoplastic — Determination of low temperature stiffening (Gehman test)",Caoutchouc vulcanisé ou thermoplastique — Détermination de
• ISO 1432:1988/Cor 1:200338908,IS,Cor,ISO 1432:1988/Cor 1:2003,"Rubber, vulcanized or thermoplastic — Determination of low temperature stiffening (Gehman test) — Technical Corrigendum 1",Caoutchouc vulcani
• ISO 1432:201355608,IS,,ISO 1432:2013,"Rubber, vulcanized or thermoplastic — Determination of low-temperature stiffening (Gehman test)",Caoutchouc vulcanisé ou thermoplastique — Détermination de
• ISO 1433:19846022,IS,,ISO 1433:1984,"Rubber, vulcanized — Preferred gradations of properties",Caoutchouc vulcanisé — Gradations préférées des propriétés,1984-05-01,1,['83.060'],ISO/TC 45,9599,,
• ISO 1434:19756024,IS,,ISO 1434:1975,Natural rubber in bales — Amount of bale coating — Specification and determination,Caoutchouc naturel en balles — Quantité d'enduit — Spécifications et déter
• ISO 1434:19956025,IS,,ISO 1434:1995,Natural rubber in bales — Amount of bale coating — Determination,Caoutchouc naturel en balles — Quantité d'enduit — Détermination,1995-11-09,2,['83.060'],ISO
• ISO 1435:19816026,IS,,ISO 1435:1981,Rubber compounding ingredients — Carbon black (pelletized) — Determination of sieve residue,Ingrédients de mélange du caoutchouc — Noir de carbone (en granul
• ISO 1435:19886027,IS,,ISO 1435:1988,Rubber compounding ingredients — Carbon black (pelletized) — Determination of fines content,Ingrédients de mélange du caoutchouc — Noir de carbone (en granul
• ISO 1436-1:200128769,IS,,ISO 1436-1:2001,Rubber hoses and hose assemblies — Wire-braid-reinforced hydraulic types — Specification — Part 1: Oil-based fluid applications,Tuyaux et flexibles en cao
• ISO 1436-2:200535566,IS,,ISO 1436-2:2005,Rubber hoses and hose assemblies — Wire-braid-reinforced hydraulic types — Specification — Part 2: Water-based fluid applications,Tuyaux et flexibles en c
• ISO 1436:19786028,IS,,ISO 1436:1978,Rubber products — Hoses and hose assemblies — Wire reinforced hydraulic type,Produits en caoutchouc — Tuyaux et flexibles — Type avec armature de fils métall
• ISO 1436:19916029,IS,,ISO 1436:1991,Rubber hoses and hose assemblies — Wire-reinforced hydraulic type — Specification,Tuyaux et flexibles en caoutchouc — Type hydraulique à armature de fils mét
• ISO 1436:200945404,IS,,ISO 1436:2009,Rubber hoses and hose assemblies — Wire-braid-reinforced hydraulic types for oil-based or water-based fluids — Specification,Tuyaux et flexibles en caoutcho
• ISO 1436:2009/Cor 1:201055914,IS,Cor,ISO 1436:2009/Cor 1:2010,Rubber hoses and hose assemblies — Wire-braid-reinforced hydraulic types for oil-based or water-based fluids — Specification — Technical Corri
• ISO 1436:201770382,IS,,ISO 1436:2017,Rubber hoses and hose assemblies — Wire-braid-reinforced hydraulic types for oil-based or water-based fluids — Specification,Tuyaux et flexibles en caoutcho
• ISO 1436:202075648,IS,,ISO 1436:2020,Rubber hoses and hose assemblies — Wire-braid-reinforced hydraulic types for oil-based or water-based fluids — Specification,Tuyaux et flexibles en caoutcho
• ISO 1437:19756030,IS,,ISO 1437:1975,Carbon black for use in the rubber industry — Determination of sieve residue,Noir de carbone pour l'industrie des élastomères — Détermination du refus sur ta
• ISO 1437:19856031,IS,,ISO 1437:1985,Rubber compounding ingredients — Carbon black — Determination of sieve residue,Ingrédients de mélange du caoutchouc — Noir de carbone — Détermination du refu
• ISO 1437:19926032,IS,,ISO 1437:1992,Rubber compounding ingredients — Carbon black — Determination of sieve residue,Ingrédients de mélange du caoutchouc — Noir de carbone — Détermination du refu
• ISO 1437:200738927,IS,,ISO 1437:2007,Rubber compounding ingredients — Carbon black — Determination of sieve residue,Ingrédients de mélange du caoutchouc — Noir de carbone — Détermination du ref
• ISO 1438-1:19806034,IS,,ISO 1438-1:1980,Water flow measurement in open channels using weirs and Venturi flumes — Part 1: Thin-plate weirs,Mesure de débit de l'eau dans les canaux découverts au mo
• ISO 1438-1:1980/Amd 1:19986035,IS,Amd,ISO 1438-1:1980/Amd 1:1998,Water flow measurement in open channels using weirs and Venturi flumes — Part 1: Thin-plate weirs — Amendment 1,Mesure de débit de l'eau dans
• ISO 1438:19756033,IS,,ISO 1438:1975,Liquid flow measurement in open channels using thin-plate weirs and Venturi flumes,Mesure de débit des liquides dans les canaux découverts au moyen de dévers
• ISO 1438:200838066,IS,,ISO 1438:2008,Hydrometry — Open channel flow measurement using thin-plate weirs,Hydrométrie — Mesure de débit dans les canaux découverts au moyen de déversoirs à paroi mi
• ISO 1438:2008/Cor 1:200852426,IS,Cor,ISO 1438:2008/Cor 1:2008,Hydrometry — Open channel flow measurement using thin-plate weirs — Technical Corrigendum 1,Hydrométrie — Mesure de débit dans les canaux déco
• ISO 1442:19736036,IS,,ISO 1442:1973,Meat and meat products — Determination of moisture content,Viandes et produits à base de viande — Détermination de l'humidité,1973-04-01,1,['67.120.10'],ISO/
• ISO 1442:19976037,IS,,ISO 1442:1997,Meat and meat products — Determination of moisture content (Reference method),Viande et produits à base de viande — Détermination de l'humidité (Méthode de r
• ISO 1444:19736040,IS,,ISO 1444:1973,Meat and meat products — Determination of free fat content,Viandes et produits à base de viande — Détermination de la teneur en matière grasse libre,1973-04-
• ISO 1446:19786042,IS,,ISO 1446:1978,Green coffee — Determination of moisture content (Basic reference method),Café vert — Détermination de la teneur en eau (Méthode de référence fondamentale),1
• ISO 1447:19786044,IS,,ISO 1447:1978,Green coffee — Determination of moisture content (Routine method),Café vert — Détermination de la teneur en eau (Méthode de routine),1978-01-01,1,['67.140.20
• ISO 1456:19746046,IS,,ISO 1456:1974,Metallic coatings — Electroplated coatings of nickel plus chromium,Revêtements métalliques — Dépôts électrolytiques de nickel plus chrome,1974-07-01,1,['25.2
• ISO 1456:19886047,IS,,ISO 1456:1988,Metallic coatings — Electrodeposited coatings of nickel plus chromium and of copper plus nickel plus chromium,Revêtements métalliques — Dépôts électrolytique
• ISO 1456:200336733,IS,,ISO 1456:2003,Metallic coatings — Electrodeposited coatings of nickel plus chromium and of copper plus nickel plus chromium,Revêtements métalliques — Dépôts électrolytiqu
• ISO 1457:19746048,IS,,ISO 1457:1974,Metallic coatings — Electroplated coatings of copper plus nickel plus chromium on iron or steel,Revêtements métalliques — Dépôts électrolytiques de cuivre pl
• ISO 1458:19746049,IS,,ISO 1458:1974,Metallic coatings — Electroplated coatings of nickel,Revêtements métalliques — Dépôts électrolytiques de nickel,1974-07-01,1,['25.220.40'],ISO/TC 107/SC 3,95
• ISO 1458:19886050,IS,,ISO 1458:1988,Metallic coatings — Electrodeposited coatings of nickel,Revêtements métalliques — Dépôts électrolytiques de nickel,1988-09-01,2,['25.220.40'],ISO/TC 107/SC 3
• ISO 1458:200236746,IS,,ISO 1458:2002,Metallic coatings — Electrodeposited coatings of nickel,Revêtements métalliques — Dépôts électrolytiques de nickel,2002-12-02,3,['25.220.40'],ISO/TC 107/SC
• ISO 1459:19736051,IS,,ISO 1459:1973,Metallic coatings — Protection against corrosion by hot dip galvanizing — Guiding principles,Revêtements métalliques — Protection contre la corrosion par gal
• ISO 1460:19736052,IS,,ISO 1460:1973,Metallic coatings — Hot dip galvanized coatings on ferrous materials — Determination of the mass per unit area — Gravimetric method,Revêtements métalliques —
• ISO 1460:19926054,IS,,ISO 1460:1992,Metallic coatings — Hot dip galvanized coatings on ferrous materials — Gravimetric determination of the mass per unit area,Revêtements métalliques — Revêteme
• ISO 1461:19736055,IS,,ISO 1461:1973,Metallic coatings — Hot dip galvanized coatings on fabricated ferrous products — Requirements,Revêtements métalliques — Revêtements de galvanisation à chaud
• ISO 1461:19996056,IS,,ISO 1461:1999,Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test methods,Revêtements par galvanisation à chaud sur produits finis
• ISO 1461:200943431,IS,,ISO 1461:2009,Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test methods,Revêtements par galvanisation à chaud sur produits finis
• ISO 1462:19736057,IS,,ISO 1462:1973,Metallic coatings — Coatings other than those anodic to the basis metal — Accelerated corrosion tests — Method for the evaluation of the results,Revêtements
• ISO 1463:19826058,IS,,ISO 1463:1982,Metallic and oxide coatings — Measurement of coating thickness — Microscopical method,Revêtements métalliques et couches d'oxyde — Mesurage de l'épaisseur —
• ISO 1463:200331239,IS,,ISO 1463:2003,Metallic and oxide coatings — Measurement of coating thickness — Microscopical method,Revêtements métalliques et couches d'oxyde — Mesurage de l'épaisseur d
• ISO 1464:19796059,IS,,ISO 1464:1979,Aircraft — Clearance dimensions for tripod jacks,Aéronefs — Dimensions d'encombrement des vérins de levage tripodes,1979-09-01,1,['49.100'],ISO/TC 20,9599,,[
• ISO 1464:19856060,IS,,ISO 1464:1985,Aerospace — Tripod jacks — Clearance dimensions,Aéronautique — Vérins de levage tripodes — Dimensions d'encombrement,1985-05-16,2,['49.100'],ISO/TC 20/SC 9,9
• ISO 1465:19766061,IS,,ISO 1465:1976,Aircraft — Liquid oxygen replenishment couplings — Mating dimensions,Aéronefs — Raccords de remplissage en oxygène liquide — Dimensions de raccordement,1976-
• ISO 1467:19736064,IS,,ISO 1467:1973,General purpose push-pull single-pole circuit-breakers for aircraft — Performance requirements,Disjoncteurs unipolaires à bouton-poussoir d'usage courant uti
• ISO 1478:19836067,IS,,ISO 1478:1983,Tapping screws thread,Filetage de vis à tôle,1983-09-01,1,['21.040.30'],ISO/TC 2,9599,,[29386],"['en','fr']",2
• ISO 1479:19836068,IS,,ISO 1479:1983,Hexagon head tapping screws,Vis à tôle à tête hexagonale,1983-08-01,1,['21.060.10'],ISO/TC 2/SC 13,9599,,[54040],"['en','fr']",3
• ISO 1481:19836070,IS,,ISO 1481:1983,Slotted pan head tapping screws,"Vis à tôle à tête cylindrique large, fendue",1983-08-01,1,['21.060.10'],ISO/TC 2/SC 13,9599,,[54041],"['en','fr']",3
• ISO 1482:19836071,IS,,ISO 1482:1983,Slotted countersunk (flat) head tapping screws (common head style),"Vis à tôle à tête fraisée, fendue",1983-09-01,1,['21.060.10'],ISO/TC 2/SC 13,9599,,[54042
• ISO 1483:19836072,IS,,ISO 1483:1983,Slotted raised countersunk (oval) head tapping screws (common head style),"Vis à tôle à tête fraisée bombée, fendue",1983-09-01,1,['21.060.10'],ISO/TC 2/SC 1
• ISO 1496-1:19846075,IS,,ISO 1496-1:1984,Series 1 freight containers — Specification and testing — Part 1: General cargo containers for general purposes,Conteneurs de la série 1 — Spécifications e
• ISO 1496-1:1984/Amd 1:19876077,IS,Amd,ISO 1496-1:1984/Amd 1:1987,Series 1 freight containers — Specification and testing — Part 1: General cargo containers for general purposes — Amendment 1,Conteneurs de l
• ISO 1496-1:19906076,IS,,ISO 1496-1:1990,Series 1 freight containers — Specification and testing — Part 1: General cargo containers for general purposes,Conteneurs de la série 1 — Spécifications e
• ISO 1496-1:1990/Amd 1:199320615,IS,Amd,ISO 1496-1:1990/Amd 1:1993,Series 1 freight containers — Specification and testing — Part 1: General cargo containers for general purposes — Amendment 1: 1AAA and 1BBB
• ISO 1496-1:1990/Amd 2:199820442,IS,Amd,ISO 1496-1:1990/Amd 2:1998,Series 1 freight containers — Specification and testing — Part 1: General cargo containers for general purposes — Amendment 2,Conteneurs de
• ISO 1496-1:1990/Amd 3:200539871,IS,Amd,ISO 1496-1:1990/Amd 3:2005,Series 1 freight containers — Specification and testing — Part 1: General cargo containers for general purposes — Amendment 3,Conteneurs de
• ISO 1496-1:1990/Amd 4:200639872,IS,Amd,ISO 1496-1:1990/Amd 4:2006,Series 1 freight containers — Specification and testing — Part 1: General cargo containers for general purposes — Amendment 4,Conteneurs de
• ISO 1496-1:1990/Amd 5:200641912,IS,Amd,ISO 1496-1:1990/Amd 5:2006,Series 1 freight containers — Specification and testing — Part 1: General cargo containers for general purposes — Amendment 5: Door end secu
• ISO 1496-2:19796078,IS,,ISO 1496-2:1979,Series 1 freight containers — Specification and testing — Part 2: Thermal containers,Conteneurs de la série 1 — Spécifications et essais — Partie 2: Conten
• ISO 1496-2:19886079,IS,,ISO 1496-2:1988,Series 1 freight containers — Specification and testing — Part 2: Thermal containers,Conteneurs de la série 1 — Spécifications et essais — Partie 2: Conten
• ISO 1496-2:199620449,IS,,ISO 1496-2:1996,Series 1 freight containers — Specification and testing — Part 2: Thermal containers,Conteneurs de la série 1 — Spécifications et essais — Partie 2: Conte
• ISO 1496-2:1996/Amd 1:200640905,IS,Amd,ISO 1496-2:1996/Amd 1:2006,Series 1 freight containers — Specification and testing — Part 2: Thermal containers — Amendment 1,Conteneurs de la série 1 — Spécifications
• ISO 1496-2:1996/Cor 1:199733393,IS,Cor,ISO 1496-2:1996/Cor 1:1997,Series 1 freight containers — Specification and testing — Part 2: Thermal containers — Technical Corrigendum 1,Conteneurs de la série 1 — Sp
• ISO 1496-2:200845621,IS,,ISO 1496-2:2008,Series 1 freight containers — Specification and testing — Part 2: Thermal containers,Conteneurs de la série 1 — Spécifications et essais — Partie 2: Conte
• ISO 1496-3:19816080,IS,,ISO 1496-3:1981,Series 1 freight containers — Specification and testing — Part 3: Tank containers for liquids and gases,Conteneurs de la série 1 : Spécifications et essais
• ISO 1496-3:19916081,IS,,ISO 1496-3:1991,"Series 1 freight containers — Specification and testing — Part 3: Tank containers for liquids, gases and pressurized dry bulk","Conteneurs de la série 1 —

← records 1,201–1,600 · All of Withdrawn and superseded ISO standards · records 2,001 on →