Records 1,201–1,600 — Withdrawn and superseded ISO standards

Records 1,201 to 1,600 of 24,640. Each links to its own page, which carries the source URL and the quoted line that states the value.

• ISO 719:19814947,IS,,ISO 719:1981,Glass — Hydrolytic resistance of glass grains at 98 degrees C — Method of test and classification,Verre — Résistance hydrolytique du verre en grains à 98 degr
• ISO 719:19854948,IS,,ISO 719:1985,Glass — Hydrolytic resistance of glass grains at 98 degrees C — Method of test and classification,Verre — Résistance hydrolytique du verre en grains à 98 degr
• ISO 720:19814949,IS,,ISO 720:1981,Glass — Hydrolytic resistance of glass grains at 121 degrees C — Method of test and classification,Verre — Résistance hydrolytique du verre en grains à 121 de
• ISO 720:19854950,IS,,ISO 720:1985,Glass — Hydrolytic resistance of glass grains at 121 degrees C — Method of test and classification,Verre — Résistance hydrolytique du verre en grains à 121 de
• ISO 721:19744951,IS,,ISO 721:1974,Rock drilling — Integral stems,Forage des roches — Fleurets monoblocs,1974-07-01,1,['73.100.30'],ISO/TC 82,9599,,[4952],"['en','fr']",4
• ISO 722:19854953,IS,,ISO 722:1985,Rock drilling — Hollow hexagonal drill-steels in bar form,Forage des roches — Profilé hexagonal creux en acier pour fleurets,1985-10-03,2,['73.100.30'],ISO/TC
• ISO 723:19744955,IS,,ISO 723:1974,Rock drilling — Forged collared shanks and chuck bushings for hollow hexagonal drill-steels,Forage des roches — Emmanchements à collerette forgée et douilles
• ISO 724:19784957,IS,,ISO 724:1978,ISO metric screw threads — Basic dimensions,Filetages métriques ISO — Dimensions de base,1978-11-01,1,['21.040.10'],ISO/TC 1,9599,,[4958],"['en','fr']",5
• ISO 724:19934958,IS,,ISO 724:1993,ISO general-purpose metric screw threads — Basic dimensions,Filetages métriques ISO pour usages généraux — Dimensions de base,1993-10-07,2,['21.040.10'],ISO/T
• ISO 724:1993/Cor 1:200954553,IS,Cor,ISO 724:1993/Cor 1:2009,ISO general-purpose metric screw threads — Basic dimensions — Technical Corrigendum 1,Filetages métriques ISO pour usages généraux — Dimensions
• ISO 725:19784959,IS,,ISO 725:1978,ISO inch screw threads — Basic dimensions,Filetages ISO en inches — Dimensions de base,1978-11-01,1,['21.040.20'],ISO/TC 1,9599,,[51386],"['en','fr']",5
• ISO 726:19824960,IS,,ISO 726:1982,Metallic materials — Hardness test — Calibration of standardized blocks to be used for Brinell hardness testing machines,Matériaux métalliques — Essai de dure
• ISO 727-2:200227406,IS,,ISO 727-2:2002,"Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plai
• ISO 727:19794961,IS,,ISO 727:1979,Unplasticized polyvinyl chloride (PVC) fittings with plain sockets for pipes under pressure — Dimensions of sockets — Metric series,Raccords en polychlorure d
• ISO 727:19854962,IS,,ISO 727:1985,"Fittings of unplasticized polyvinyl chloride (PVC-U), chlorinated polyvinyl chloride (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for
• ISO 728:19814963,IS,,ISO 728:1981,Coke (nominal top size greater than 20 mm) — Size analysis,Coke (dimension supérieure nominale supérieure à 20 mm) — Analyse granulométrique,1981-11-01,2,['75
• ISO 728:19954964,IS,,ISO 728:1995,Coke (nominal top size greater than 20 mm) — Size analysis by sieving,Coke (dimension supérieure nominale supérieure à 20 mm) — Analyse granulométrique par ta
• ISO 729:19854965,IS,,ISO 729:1985,Oilseeds — Determination of acidity of oils,Graines oléagineuses — Détermination de l'acidité de l'huile,1985-10-24,1,['67.200.20'],ISO/TC 34/SC 2,9599,,[4966
• ISO 730-1:19774967,IS,,ISO 730-1:1977,"Agricultural wheeled tractors — Three-point linkage — Part 1: Categories 1, 2 and 3","Tracteurs agricoles à roues — Attelage trois points — Partie 1: Catég
• ISO 730-1:19904968,IS,,ISO 730-1:1990,"Agricultural wheeled tractors — Rear-mounted three-point linkage — Part 1: Categories 1, 2 and 3","Tracteurs agricoles à roues — Attelage trois points mont
• ISO 730-1:19944969,IS,,ISO 730-1:1994,"Agricultural wheeled tractors — Rear-mounted three-point linkage — Part 1: Categories 1, 2, 3 and 4","Tracteurs agricoles à roues — Attelage trois points m
• ISO 730-1:1994/Cor 1:199525953,IS,Cor,ISO 730-1:1994/Cor 1:1995,"Agricultural wheeled tractors — Rear-mounted three-point linkage — Part 1: Categories 1, 2, 3 and 4 — Technical Corrigendum 1","Tracteurs ag
• ISO 730-2:19794970,IS,,ISO 730-2:1979,Agricultural wheeled tractors — Three-point linkage — Part 2: Category 1 N (Narrow hitch),Tracteurs agricoles à roues — Attelage trois points — Partie 2: Ca
• ISO 730-3:19824971,IS,,ISO 730-3:1982,Agricultural wheeled tractors — Three-point linkage — Part 3: Category 4,Tracteurs agricoles à roues — Attelage trois points — Partie 3: Catégorie 4,1982-06
• ISO 732:19824979,IS,,ISO 732:1982,"Photography — Dimensions for 127, 120 and 620 roll film, backing paper and film spools","Photographie — Dimensions des pellicules, du papier protecteur et de
• ISO 732:19914980,IS,,ISO 732:1991,Photography — Film dimensions — 120 and 220 sizes,Photographie — Dimensions des films — Rouleaux de pellicule 120 et 220,1991-07-11,3,['37.040.20'],ISO/TC 42,
• ISO 734-1:199826835,IS,,ISO 734-1:1998,Oilseed meals — Determination of oil content — Part 1: Extraction method with hexane (or light petroleum),Tourteaux de graines oléagineuses — Détermination
• ISO 734-1:200636502,IS,,ISO 734-1:2006,Oilseed meals — Determination of oil content — Part 1: Extraction method with hexane (or light petroleum),Tourteaux de graines oléagineuses — Détermination
• ISO 734-2:19984983,IS,,ISO 734-2:1998,Oilseed residues — Determination of oil content — Part 2: Rapid extraction method,Tourteaux de graines oléagineuses — Détermination de la teneur en huile —
• ISO 734-2:200836503,IS,,ISO 734-2:2008,Oilseed meals — Determination of oil content — Part 2: Rapid extraction method,Tourteaux de graines oléagineuses — Détermination de la teneur en huile — Pa
• ISO 734:19794982,IS,,ISO 734:1979,"Oilseeds residues — Determination of hexane extract (or light-petroleum extract), called 'oil content'","Tourteaux de graines oléagineuses — Détermination de
• ISO 734:201566393,IS,,ISO 734:2015,Oilseed meals — Determination of oil content — Extraction method with hexane (or light petroleum),Tourteaux de graines oléagineuses — Détermination de la ten
• ISO 738:19814988,IS,,ISO 738:1981,Coniferous sawn timber — Sizes — Permissible deviations and shrinkage,Bois sciés résineux — Dimensions — Écarts admissibles et retrait,1981-11-01,1,['79.040']
• ISO 741:19764991,IS,,ISO 741:1976,Sodium carbonate for industrial use — Determination of sodium hydrogen carbonate content — Titrimetric method,Carbonate de sodium à usage industriel — Dosage
• ISO 743:19764995,IS,,ISO 743:1976,Sodium carbonate for industrial use — Determination of sulphate content — Barium sulphate gravimetric method,Carbonate de sodium à usage industriel — Dosage d
• ISO 748:19795002,IS,,ISO 748:1979,Liquid flow measurement in open channels — Velocity-area methods,Mesure de débit des liquides dans les canaux découverts — Méthodes d'exploration du champ des
• ISO 748:19975003,IS,,ISO 748:1997,Measurement of liquid flow in open channels — Velocity-area methods,Mesure de débit des liquides dans les canaux découverts — Méthodes d'exploration du champ
• ISO 748:200737573,IS,,ISO 748:2007,Hydrometry — Measurement of liquid flow in open channels using current-meters or floats,Hydrométrie — Mesurage du débit des liquides dans les canaux découver
• ISO 750:19815006,IS,,ISO 750:1981,Fruit and vegetable products — Determination of titratable acidity,Produits dérivés des fruits et légumes — Détermination de l'acidité titrable,1981-11-01,1,[
• ISO 751:19815007,IS,,ISO 751:1981,Fruit and vegetable products — Determination of water-insoluble solids content,Produits dérivés des fruits et légumes — Détermination de la teneur en résidu s
• ISO 752:19815008,IS,,ISO 752:1981,Zinc ingots,Zinc en lingots,1981-04-01,1,['77.120.60'],ISO/TC 18,9599,,[32445],"['en','fr']",1
• ISO 762:19825039,IS,,ISO 762:1982,Fruit and vegetable products — Determination of mineral impurities content,Produits dérivés des fruits et légumes — Détermination de la teneur en impuretés mi
• ISO 763:19825040,IS,,ISO 763:1982,Fruit and vegetable products — Determination of ash insoluble in hydrochloric acid,Produits dérivés des fruits et légumes — Détermination des cendres insolubl
• ISO 764:19735041,IS,,ISO 764:1973,'Antimagnetic' watches for general purpose use,Montres 'antimagnétiques' pour usage courant,1973-07-01,1,['39.040.10'],ISO/TC 114,9599,,[5042],"['en','fr']",1
• ISO 764:19845042,IS,,ISO 764:1984,Horology — Antimagnetic watches,Horlogerie — Montres antimagnétiques,1984-04-01,2,['39.040.10'],ISO/TC 114/SC 12,9599,[5041],[23033],"['en','fr']",2
• ISO 764:200223033,IS,,ISO 764:2002,Horology — Magnetic resistant watches,Horlogerie — Montres antimagnétiques,2002-07-18,3,['39.040.10'],ISO/TC 114/SC 12,9599,[5042],[70610],"['en','fr']",5
• ISO 765:19765043,IS,,ISO 765:1976,Pesticides considered not to require common names,Pesticides considérés comme ne nécessitant pas de nom commun,1976-12-01,1,['65.100.01'],ISO/TC 81,9599,[5622
• ISO 766:19725045,IS,,ISO 766:1972,Fibre building boards — Determination of dimensions of test pieces,Panneaux de fibres — Détermination des dimensions des éprouvettes,1972-09-01,1,['79.060.20'
• ISO 767:19755046,IS,,ISO 767:1975,Fibre building boards — Determination of moisture content,Panneaux de fibres — Détermination de l'humidité,1975-01-01,1,['79.060.20'],ISO/TC 89,9599,,[17126],
• ISO 770:19805049,IS,,ISO 770:1980,Oil of Eucalyptus globulus,Huile essentielle d'Eucalyptus globulus,1980-11-01,1,['71.100.60'],ISO/TC 54,9599,,"[5050,32028]","['en','fr']",2
• ISO 771:19775051,IS,,ISO 771:1977,Oilseed residues — Determination of moisture and volatile matter content,Tourteaux de graines oléagineuses — Détermination de la teneur en eau et en matières
• ISO 772:19785052,IS,,ISO 772:1978,Liquid flow measurement in open channels — Vocabulary and symbols,Mesurage du débit des liquides dans les canaux découverts — Vocabulaire et symboles,1978-06-
• ISO 772:19885053,IS,,ISO 772:1988,Liquid flow measurement in open channels — Vocabulary and symbols,Mesure de débit des liquides dans les canaux découverts — Vocabulaire et symboles,1988-07-14
• ISO 772:19965054,IS,,ISO 772:1996,Hydrometric determinations — Vocabulary and symbols,Déterminations hydrométriques — Vocabulaire et symboles,1996-04-25,4,"['01.040.17','17.120.20']",ISO/TC 11
• ISO 772:1996/Amd 1:200221326,IS,Amd,ISO 772:1996/Amd 1:2002,Hydrometric determinations — Vocabulary and symbols — Amendment 1: Additional terms and definitions,Déterminations hydrométriques — Vocabulaire
• ISO 772:1996/Amd 2:200437233,IS,Amd,ISO 772:1996/Amd 2:2004,Hydrometric determinations — Vocabulary and symbols — Amendment 2,Déterminations hydrométriques — Vocabulaire et symboles — Amendement 2,2004-0
• ISO 772:201141035,IS,,ISO 772:2011,Hydrometry — Vocabulary and symbols,Hydrométrie — Vocabulaire et symboles,2011-07-21,5,"['01.040.17','17.120.20']",ISO/TC 113,9599,"[37233,5054,21326]",[7323
• ISO 776:19825062,IS,,ISO 776:1982,Pulps — Determination of acid-insoluble ash,Pâtes — Détermination des cendres insolubles dans l'acide,1982-12-01,2,['85.040'],ISO/TC 6,9599,,[52672],"['en','f
• ISO 777:19825063,IS,,ISO 777:1982,Pulps — Determination of calcium content — EDTA titrimetric and flame atomic absorption spectrometric methods,Pâtes — Détermination de la teneur en calcium —
• ISO 777:200131803,IS,,ISO 777:2001,"Paper, board and pulp — Determination of calcium","Papier, carton et pâte — Détermination de la teneur en calcium",2001-05-24,2,['85.040'],ISO/TC 6,9599,[50
• ISO 777:200541587,IS,,ISO 777:2005,"Paper, board and pulp — Determination of acid-soluble calcium","Papier, carton et pâte — Détermination de la teneur en calcium soluble dans l'acide",2005-04
• ISO 778:19825064,IS,,ISO 778:1982,Pulps — Determination of copper content — Extraction-photometric and flame atomic absorption spectrometric methods,Pâtes — Détermination de la teneur en cuivr
• ISO 778:200131804,IS,,ISO 778:2001,"Paper, board and pulp — Determination of copper","Papier, carton et pâte — Détermination de la teneur en cuivre",2001-05-24,2,['85.040'],ISO/TC 6,9599,[5064
• ISO 778:200541588,IS,,ISO 778:2005,"Paper, board and pulp — Determination of acid-soluble copper","Papier, carton et pâte — Détermination de la teneur en cuivre soluble dans l'acide",2005-04-2
• ISO 779:19825065,IS,,ISO 779:1982,"Pulps — Determination of iron content — 1,10-Phenanthroline photometric and flame atomic absorption spectrometric methods","Pâtes — Détermination de la teneu
• ISO 779:200131805,IS,,ISO 779:2001,"Paper, board and pulp — Determination of iron","Papier, carton et pâte — Détermination de la teneur en fer",2001-05-24,2,['85.040'],ISO/TC 6,9599,[5065],[41
• ISO 779:200541589,IS,,ISO 779:2005,"Paper, board and pulp — Determination of acid-soluble iron","Papier, carton et pâte — Détermination de la teneur en fer soluble dans l'acide",2005-04-27,3,"
• ISO 780:19845066,IS,,ISO 780:1984,Packaging — Pictorial marking for handling of goods,Emballages — Symboles graphiques relatifs à la manutention des marchandises,1984-10-01,2,"['01.080.99','55
• ISO 780:19855067,IS,,ISO 780:1985,Packaging — Pictorial marking for handling of goods,Emballages — Symboles graphiques relatifs à la manutention des marchandises,1985-09-05,3,['55.020'],ISO/TC
• ISO 780:199720323,IS,,ISO 780:1997,Packaging — Pictorial marking for handling of goods,Emballages — Marquages graphiques relatifs à la manutention des marchandises,1997-10-30,4,"['01.080.99','
• ISO 783:19895072,IS,,ISO 783:1989,Metallic materials — Tensile testing at elevated temperature,Matériaux métalliques — Essai de traction à température élevée,1989-11-23,1,['77.040.10'],ISO/TC
• ISO 783:199926858,IS,,ISO 783:1999,Metallic materials — Tensile testing at elevated temperature,Matériaux métalliques — Essai de traction à température élevée,1999-08-26,2,['77.040.10'],ISO/TC
• ISO 787-2:19815078,IS,,ISO 787-2:1981,General methods of test for pigments and extenders — Part 2: Determination of matter volatile at 105 degrees C,Méthodes générales d'essai des pigments et ma
• ISO 787-3:19795079,IS,,ISO 787-3:1979,General methods of test for pigments and extenders — Part 3: Determination of matter soluble in water — Hot extraction method,Méthodes générales d'essai des
• ISO 787-5:19805081,IS,,ISO 787-5:1980,General methods of test for pigments and extenders — Part 5: Determination of oil absorption value,Méthodes générales d'essai des pigments et matières de ch
• ISO 787-7:19815082,IS,,ISO 787-7:1981,General methods of test for pigments and extenders — Part 7: Determination of residue on sieve — Water method — Manual procedure,Méthodes générales d'essai
• ISO 787-8:19795083,IS,,ISO 787-8:1979,General methods of test for pigments and extenders — Part 8: Determination of matter soluble in water — Cold extraction method,Méthodes générales d'essai de
• ISO 787-9:19815084,IS,,ISO 787-9:1981,General methods of test for pigments and extenders — Part 9: Determination of pH value of an aqueous suspension,Méthodes générales d'essai des pigments et m
• ISO 787-10:19815085,IS,,ISO 787-10:1981,General methods of test for pigments and extenders — Part 10: Determination of density — Pyknometer method,Méthodes générales d'essai des pigments et matiè
• ISO 787-13:19735089,IS,,ISO 787-13:1973,"General methods of test for pigments — Part 13: Determination of water-soluble sulphates, chlorides and nitrates","Méthodes générales d'essais des pigment
• ISO 787-13:200236061,IS,,ISO 787-13:2002,"General methods of test for pigments and extenders — Part 13: Determination of water-soluble sulfates, chlorides and nitrates","Méthodes générales d'essa
• ISO 787-14:19735091,IS,,ISO 787-14:1973,General methods of test for pigments — Part 14: Determination of resistivity of aqueous extract,Méthodes générales d'essais des pigments — Partie 14: Déter
• ISO 787-14:200236103,IS,,ISO 787-14:2002,General methods of test for pigments and extenders — Part 14: Determination of resistivity of aqueous extract,Méthodes générales d'essai des pigments et m
• ISO 787-15:19865093,IS,,ISO 787-15:1986,General methods of test for pigments and extenders — Part 15: Comparison of resistance to light of coloured pigments of similar types,Méthodes générales d'
• ISO 787-17:19735095,IS,,ISO 787-17:1973,General methods of test for pigments — Part 17: Comparison of lightening power of white pigments,Méthodes générales d'essais des pigments — Partie 17: Comp
• ISO 787-17:200236104,IS,,ISO 787-17:2002,General methods of test for pigments and extenders — Part 17: Comparison of lightening power of white pigments,Méthodes générales d'essai des pigments et
• ISO 787-19:19745098,IS,,ISO 787-19:1974,General methods of test for pigments — Part 19: Determination of water-soluble nitrates (Salicylic acid method),Méthodes générales d'essais des pigments —
• ISO 787-20:19755099,IS,,ISO 787-20:1975,General methods of test for pigments — Part 20: Comparison of ease of dispersion (Oscillatory shaking method),Méthodes générales d'essais des pigments — Pa
• ISO 787-24:19825103,IS,,ISO 787-24:1982,General methods of test for pigments and extenders — Part 24: Determination of relative tinting strength of coloured pigments and relative scattering power
• ISO 787-25:19935105,IS,,ISO 787-25:1993,"General methods of test for pigments and extenders — Part 25: Comparison of the colour, in full-shade systems, of white, black and coloured pigments — Col
• ISO 788:19745107,IS,,ISO 788:1974,Ultramarine pigments for paints,Pigments d'outremer pour peintures,1974-06-01,1,['87.060.10'],ISO/TC 256,9599,,"[74770,80022]","['en','fr']",2
• ISO 789-1:19815109,IS,,ISO 789-1:1981,Agricultural tractors — Test procedures — Part 1: Power tests,Tracteurs agricoles — Méthodes d'essai — Partie 1: Essais de puissance,1981-07-01,1,['65.060.1
• ISO 789-1:19905110,IS,,ISO 789-1:1990,Agricultural tractors — Test procedures — Part 1: Power tests for power take-off,Tracteurs agricoles — Méthodes d'essai — Partie 1: Essais de puissance à la
• ISO 789-2:19835111,IS,,ISO 789-2:1983,Agricultural tractors — Test procedures — Part 2: Hydraulic power and lifting capacity,Tracteurs agricoles — Méthodes d'essai — Partie 2: Puissance hydrauli
• ISO 789-2:19935112,IS,,ISO 789-2:1993,Agricultural tractors — Test procedures — Part 2: Rear three-point linkage lifting capacity,Tracteurs agricoles — Méthodes d'essai — Partie 2: Capacité de r
• ISO 789-3:19825113,IS,,ISO 789-3:1982,Agricultural tractors — Test procedures — Part 3: Turning and clearance diameters,Tracteurs agricoles — Méthodes d'essai — Partie 3: Diamètres de braquage e
• ISO 789-3:19935114,IS,,ISO 789-3:1993,Agricultural tractors — Test procedures — Part 3: Turning and clearance diameters,Tracteurs agricoles — Méthodes d'essai — Partie 3: Diamètres de braquage e
• ISO 789-4:19825115,IS,,ISO 789-4:1982,Agricultural tractors — Test procedures — Part 4: Measurement of exhaust smoke,Tracteurs agricoles — Méthodes d'essai — Partie 4: Mesurage de la fumée d'éch
• ISO 789-6:19825118,IS,,ISO 789-6:1982,Agricultural tractors — Test procedures — Part 6: Centre of gravity,Tracteurs agricoles — Méthodes d'essai — Partie 6: Centre de gravité,1982-09-01,1,['65.0
• ISO 789-6:1982/Amd 1:199623577,IS,Amd,ISO 789-6:1982/Amd 1:1996,Agricultural tractors — Test procedures — Part 6: Centre of gravity — Amendment 1,Tracteurs agricoles — Méthodes d'essai — Partie 6: Centre d
• ISO 789-9:19905121,IS,,ISO 789-9:1990,Agricultural tractors — Test procedures — Part 9: Power tests for drawbar,Tracteurs agricoles — Méthodes d'essai — Partie 9: Essais de puissance à la barre
• ISO 789-9:1990/Amd 1:19935122,IS,Amd,ISO 789-9:1990/Amd 1:1993,Agricultural tractors — Test procedures — Part 9: Power tests for drawbar — Amendment 1,Tracteurs agricoles — Méthodes d'essai — Partie 9: Ess
• ISO 789-10:19965123,IS,,ISO 789-10:1996,Agricultural tractors — Test procedures — Part 10: Hydraulic power at tractor/implement interface,Tracteurs agricoles — Méthodes d'essai — Partie 10: Puiss
• ISO 790:19735125,IS,,ISO 790:1973,Withdrawal of ISO 790-1973,Annulation de l'ISO 790-1973,1973-09-01,1,['55.180.10'],ISO/TC 104,9599,,[12648],['en'],4
• ISO 799:19805137,IS,,ISO 799:1980,Shipbuilding — Pilot ladders,Construction navale — Échelles de pilote,1980-07-01,1,['47.020.50'],ISO/TC 8/SC 1,9599,[75575],[5138],['en'],5
• ISO 799:19865138,IS,,ISO 799:1986,Shipbuilding — Pilot ladders,Construction navale — Échelles de pilote,1986-09-25,2,['47.020.50'],ISO/TC 8/SC 1,9599,[5137],[28374],"['en','fr']",5
• ISO 799:200428374,IS,,ISO 799:2004,Ships and marine technology — Pilot ladders,Navires et technologie maritime — Échelles de pilote,2004-01-19,3,['47.020.50'],ISO/TC 8/SC 1,9599,[5138],[68808]
• ISO 800:19775139,IS,,ISO 800:1977,Plastics — Phenolic moulding materials — Specification,Plastiques — Matières à mouler phénoplastes — Spécifications,1977-11-01,1,['83.080.10'],ISO/TC 61/SC 12
• ISO 800:19925140,IS,,ISO 800:1992,Plastics — Phenolic moulding materials — Specification,Plastiques — Matières à mouler phénoplastes — Spécification,1992-01-30,2,['83.080.10'],ISO/TC 61/SC 12,
• ISO 801-1:19795142,IS,,ISO 801-1:1979,Pulps — Determination of saleable mass in lots — Part 1: Pulp baled in sheet form,Pâtes — Détermination de la masse marchande des lots — Partie 1: Balles de
• ISO 801-2:19795144,IS,,ISO 801-2:1979,Pulps — Determination of saleable mass in lots — Part 2: Pulps (such as flash-dried pulp) baled in slabs,Pâtes — Détermination de la masse marchande des lot
• ISO 802:19765147,IS,,ISO 802:1976,Aluminium oxide primarily used for the production of aluminium — Preparation and storage of test samples,Oxyde d'aluminium principalement utilisé pour la prod
• ISO 803:19765148,IS,,ISO 803:1976,Aluminium oxide primarily used for the production of aluminium — Determination of loss of mass at 300 degrees C (conventional moisture),Oxyde d'aluminium prin
• ISO 806:19765151,IS,,ISO 806:1976,Aluminium oxide primarily used for the production of aluminium — Determination of loss of mass at 1 000 degrees C and 1 200 degrees C,Oxyde d'aluminium princi
• ISO 811:19815156,IS,,ISO 811:1981,Textile fabrics — Determination of resistance to water penetration — Hydrostatic pressure test,Étoffes — Détermination de la résistance à la pénétration de l'
• ISO 812:19915158,IS,,ISO 812:1991,"Rubber, vulcanized — Determination of low-temperature brittleness",Caoutchouc vulcanisé — Détermination de la fragilité à basse température,1991-11-14,1,['83
• ISO 812:200641347,IS,,ISO 812:2006,"Rubber, vulcanized or thermoplastic — Determination of low-temperature brittleness",Caoutchouc vulcanisé ou thermoplastique — Détermination de la fragilité
• ISO 812:201155607,IS,,ISO 812:2011,"Rubber, vulcanized or thermoplastic — Determination of low-temperature brittleness",Caoutchouc vulcanisé ou thermoplastique — Détermination de la fragilité
• ISO 813:19745160,IS,,ISO 813:1974,Vulcanized rubber — Determination of adhesion to metal — One-plate method,Élastomères vulcanisés — Détermination de l'adhérence au métal — Méthode à une plaqu
• ISO 813:19865161,IS,,ISO 813:1986,"Rubber, vulcanized — Determination of adhesion to metal — One-plate method",Caoutchouc vulcanisé — Détermination de l'adhérence au métal — Méthode à une plaq
• ISO 813:199720166,IS,,ISO 813:1997,"Rubber, vulcanized or thermoplastic — Determination of adhesion to a rigid substrate — 90 degree peel method",Caoutchouc vulcanisé ou thermoplastique — Déte
• ISO 813:201050752,IS,,ISO 813:2010,"Rubber, vulcanized or thermoplastic — Determination of adhesion to a rigid substrate — 90 degree peel method",Caoutchouc vulcanisé ou thermoplastique — Déte
• ISO 813:201670296,IS,,ISO 813:2016,"Rubber, vulcanized or thermoplastic — Determination of adhesion to a rigid substrate — 90 degree peel method",Caoutchouc vulcanisé ou thermoplastique — Déte
• ISO 814:19745162,IS,,ISO 814:1974,Vulcanized rubber — Determination of adhesion to metal — Two-plate method,Élastomères vulcanisés — Détermination de l'adhérence au métal — Méthode à deux plaq
• ISO 814:19865163,IS,,ISO 814:1986,"Rubber, vulcanized — Determination of adhesion to metal — Two-plate method",Caoutchouc vulcanisé — Détermination de l'adhérence au métal — Méthode à deux pla
• ISO 814:199620167,IS,,ISO 814:1996,"Rubber, vulcanized — Determination of adhesion to metal — Two-plate method",Caoutchouc vulcanisé — Détermination de l'adhérence au métal — Méthode à deux pl
• ISO 814:200745384,IS,,ISO 814:2007,"Rubber, vulcanized or thermoplastic — Determination of adhesion to metal — Two-plate method",Caoutchouc vulcanisé ou thermoplastique — Détermination de l'ad
• ISO 814:201157720,IS,,ISO 814:2011,"Rubber, vulcanized or thermoplastic — Determination of adhesion to metal — Two-plate method",Caoutchouc vulcanisé ou thermoplastique — Détermination de l'ad
• ISO 815-1:200841349,IS,,ISO 815-1:2008,"Rubber, vulcanized or thermoplastic — Determination of compression set — Part 1: At ambient or elevated temperatures",Caoutchouc vulcanisé ou thermoplasti
• ISO 815-1:201461761,IS,,ISO 815-1:2014,"Rubber, vulcanized or thermoplastic — Determination of compression set — Part 1: At ambient or elevated temperatures",Caoutchouc vulcanisé ou thermoplasti
• ISO 815-2:200841350,IS,,ISO 815-2:2008,"Rubber, vulcanized or thermoplastic — Determination of compression set — Part 2: At low temperatures",Caoutchouc vulcanisé ou thermoplastique — Déterminat
• ISO 815-2:201461762,IS,,ISO 815-2:2014,"Rubber, vulcanized or thermoplastic — Determination of compression set — Part 2: At low temperatures",Caoutchouc vulcanisé ou thermoplastique — Déterminat
• ISO 815:19725164,IS,,ISO 815:1972,Vulcanized rubbers — Determination of compression set under constant deflection at normal and high temperatures,Élastomères vulcanisés — Détermination de la d
• ISO 815:19915165,IS,,ISO 815:1991,"Rubber, vulcanized or thermoplastic — Determination of compression set at ambient, elevated or low temperatures","Caoutchouc vulcanisé ou thermoplastique — D
• ISO 815:1991/Cor 1:199321732,IS,Cor,ISO 815:1991/Cor 1:1993,"Rubber, vulcanized or thermoplastic — Determination of compression set at ambient, elevated or low temperatures — Technical Corrigendum 1","Ca
• ISO 816:19835167,IS,,ISO 816:1983,"Rubber, vulcanized — Determination of tear strength of small test pieces (Delft test pieces)",Caoutchouc vulcanisé — Détermination de la résistance au déchir
• ISO 817:19745168,IS,,ISO 817:1974,Organic refrigerants — Number designation,Fluides frigorigènes organiques — Désignation numérique,1974-09-01,1,['71.100.45'],ISO/TC 86,9599,,"[38558,5169]","[
• ISO 817:200538558,IS,,ISO 817:2005,Refrigerants — Designation system,Fluides frigorigènes — Système de désignation,2005-01-12,2,['71.100.45'],ISO/TC 86/SC 8,9599,[5168],"[40730,52433]",['en'],
• ISO 817:201452433,IS,,ISO 817:2014,Refrigerants — Designation and safety classification,Fluides frigorigènes — Désignation et classification de sécurité,2014-05-28,3,['71.100.45'],ISO/TC 86/SC
• ISO 817:2014/Amd 1:201773250,IS,Amd,ISO 817:2014/Amd 1:2017,Refrigerants — Designation and safety classification — Amendment 1,Fluides frigorigènes — Désignation et classification de sécurité — Amendemen
• ISO 817:2014/Amd 2:202179053,IS,Amd,ISO 817:2014/Amd 2:2021,Refrigerants — Designation and safety classification — Amendment 2,Fluides frigorigènes — Désignation et classification de sécurité — Amendemen
• ISO 818:19755170,IS,,ISO 818:1975,Fibre building boards — Definition — Classification,Panneaux de fibres — Définition — Classification,1975-01-01,1,"['79.060.20','01.040.79']",ISO/TC 89,9599,,
• ISO 819:19755171,IS,,ISO 819:1975,Fibre building boards — Determination of density,Panneaux de fibres — Détermination de la masse volumique,1975-01-01,1,['79.060.20'],ISO/TC 89,9599,,[17129],"
• ISO 820:19755172,IS,,ISO 820:1975,Particle boards — Definition and classification,Panneaux de particules — Définition et classification,1975-06-01,1,"['79.060.20','01.040.79']",ISO/TC 89,9599,
• ISO 821:19755173,IS,,ISO 821:1975,Particle boards — Determination of dimensions of test pieces,Panneaux de particules — Détermination des dimensions des éprouvettes,1975-06-01,1,['79.060.20'],
• ISO 822:19755176,IS,,ISO 822:1975,Particle boards — Determination of density,Panneaux de particules — Détermination de la masse volumique,1975-06-01,1,['79.060.20'],ISO/TC 89,9599,,[17129],"['
• ISO 823:19755178,IS,,ISO 823:1975,Particle boards — Determination of moisture content,Panneaux de particules — Détermination de l'humidité,1975-08-01,1,['79.060.20'],ISO/TC 89,9599,,[17126],"[
• ISO 830:19815189,IS,,ISO 830:1981,Freight containers — Terminology,Conteneurs pour le transport de marchandises — Terminologie,1981-11-01,1,"['55.180.10','01.040.55']",ISO/TC 104,9599,,[1238],
• ISO 830:1981/Amd 1:19845190,IS,Amd,ISO 830:1981/Amd 1:1984,Freight containers — Terminology — Amendment 1,Conteneurs pour le transport de marchandises — Terminologie — Amendement 1,1984-11-01,1,"['55.180
• ISO 830:1981/Amd 2:19885191,IS,Amd,ISO 830:1981/Amd 2:1988,Freight containers — Terminology — Amendment 2,Conteneurs pour le transport de marchandises — Terminologie — Amendement 2,1988-04-14,1,"['55.180
• ISO 830:19991238,IS,,ISO 830:1999,Freight containers — Vocabulary,Conteneurs pour le transport de marchandises — Vocabulaire,1999-10-14,2,"['55.180.10','01.040.55']",ISO/TC 104,9599,"[5189,519
• ISO 830:1999/Cor 1:200135234,IS,Cor,ISO 830:1999/Cor 1:2001,Freight containers — Vocabulary — Technical Corrigendum 1,Conteneurs pour le transport de marchandises — Vocabulaire — Rectificatif technique 1
• ISO 832:19755194,IS,,ISO 832:1975,Documentation — Bibliographical references — Abbreviations of typical words,Documentation — Références bibliographiques — Abréviations des mots typiques,1975-
• ISO 834-1:19992576,IS,,ISO 834-1:1999,Fire-resistance tests — Elements of building construction — Part 1: General requirements,Essai de résistance au feu — Éléments de construction — Partie 1: E
• ISO 834-1:1999/Amd 1:201254878,IS,Amd,ISO 834-1:1999/Amd 1:2012,Fire-resistance tests — Elements of building construction — Part 1: General requirements — Amendment 1,Essai de résistance au feu — Éléments
• ISO 834-1:1999/Amd 2:202181661,IS,Amd,ISO 834-1:1999/Amd 2:2021,Fire-resistance tests — Elements of building construction — Part 1: General requirements — Amendment 2,Essai de résistance au feu — Éléments
• ISO 834-7:200030323,IS,,ISO 834-7:2000,Fire-resistance tests — Elements of building construction — Part 7: Specific requirements for columns,Essais de résistance au feu — Éléments de constructio
• ISO 834:19755197,IS,,ISO 834:1975,Fire-resistance tests — Elements of building construction,Essais de résistance au feu — Éléments de construction,1975-11-01,1,['13.220.50'],ISO/TC 92,9599,,[2
• ISO 834:1975/Amd 1:19795198,IS,Amd,ISO 834:1975/Amd 1:1979,Fire-resistance tests — Elements of building construction — Amendment 1,Essais de résistance au feu — Éléments de construction — Amendement 1,19
• ISO 834:1975/Amd 2:19805199,IS,Amd,ISO 834:1975/Amd 2:1980,Fire-resistance tests — Elements of building construction — Amendment 2,Essais de résistance au feu — Éléments de construction — Amendement 2,19
• ISO 835-1:19815201,IS,,ISO 835-1:1981,Laboratory glassware — Graduated pipettes — Part 1: General requirements,Verrerie de laboratoire — Pipettes graduées — Partie 1: Spécifications générales,19
• ISO 835-2:19815202,IS,,ISO 835-2:1981,Laboratory glassware — Graduated pipettes — Part 2: Pipettes for which no waiting time is specified,Verrerie de laboratoire — Pipettes graduées — Partie 2:
• ISO 835-3:19815203,IS,,ISO 835-3:1981,Laboratory glassware — Graduated pipettes — Part 3: Pipettes for which a waiting time of 15 s is specified,Verrerie de laboratoire — Pipettes graduées — Par
• ISO 835-4:19815204,IS,,ISO 835-4:1981,Laboratory glassware — Graduated pipettes — Part 4: Blow-out pipettes,Verrerie de laboratoire — Pipettes graduées — Partie 4: Pipettes à souffler,1981-08-01
• ISO 839-1:19765208,IS,,ISO 839-1:1976,Milling machine arbors with 7/24 tapers — Part 1: Dimensions,Arbres porte-fraises au cône 7/24 — Partie 1: Dimensions et désignation,1976-06-01,1,['25.060.2
• ISO 840:19735210,IS,,ISO 840:1973,Withdrawal of ISO 840-1973,Annulation de l'ISO 840-1973,1973-12-01,1,['25.040.20'],ISO/IEC JTC 1,9599,,[13540],"['en','fr']",4
• ISO 841:19745211,IS,,ISO 841:1974,Numerical control of machines — Axis and motion nomenclature,Commande numérique des machines — Nomenclature des axes et des mouvements,1974-07-01,1,['25.040.2
• ISO 842:19745212,IS,,ISO 842:1974,Raw materials for paints and varnishes — Sampling,Matières premières pour peintures et vernis — Échantillonnage,1974-07-01,1,['87.060.01'],ISO/TC 35,9599,,[52
• ISO 842:19845213,IS,,ISO 842:1984,Raw materials for paints and varnishes — Sampling,Matières premières pour peintures et vernis — Échantillonnage,1984-06-01,2,['87.060.01'],ISO/TC 35,9599,[521
• ISO 844:19785216,IS,,ISO 844:1978,Cellular plastics — Compression test of rigid materials,Plastiques alvéolaires — Essai de compression des matériaux rigides,1978-09-01,1,['83.100'],ISO/TC 61/
• ISO 844:199820071,IS,,ISO 844:1998,Cellular plastics — Compression test for rigid materials — Specification,Plastiques alvéolaires — Essai de compression des matériaux rigides — Specification,
• ISO 844:200134846,IS,,ISO 844:2001,Rigid cellular plastics — Determination of compression properties,Plastiques alvéolaires rigides — Détermination des caractéristiques de compression,2001-05-
• ISO 844:200434847,IS,,ISO 844:2004,Rigid cellular plastics — Determination of compression properties,Plastiques alvéolaires rigides — Détermination des caractéristiques de compression,2004-06-
• ISO 844:200745078,IS,,ISO 844:2007,Rigid cellular plastics — Determination of compression properties,Plastiques alvéolaires rigides — Détermination des caractéristiques de compression,2007-04-
• ISO 844:201455473,IS,,ISO 844:2014,Rigid cellular plastics — Determination of compression properties,Plastiques alvéolaires rigides — Détermination des caractéristiques de compression,2014-07-
• ISO 844:202173560,IS,,ISO 844:2021,Rigid cellular plastics — Determination of compression properties,Plastiques alvéolaires rigides — Détermination des caractéristiques de compression,2021-03-
• ISO 845:19775217,IS,,ISO 845:1977,Cellular rubbers and plastics — Determination of apparent density,Caoutchoucs et plastiques alvéolaires — Détermination de la masse volumique apparente,1977-1
• ISO 845:19885218,IS,,ISO 845:1988,Cellular plastics and rubbers — Determination of apparent (bulk) density,Caoutchoucs et plastiques alvéolaires — Détermination de la masse volumique apparente
• ISO 846:19785219,IS,,ISO 846:1978,Plastics — Determination of behaviour under the action of fungi and bacteria — Evaluation by visual examination or measurement of change in mass or physical p
• ISO 846:199720578,IS,,ISO 846:1997,Plastics — Evaluation of the action of microorganisms,Plastiques — Évaluation de l'action des micro-organismes,1997-06-12,2,"['83.080.01','07.100.99']",ISO/T
• ISO 855:19815231,IS,,ISO 855:1981,"Oil of lemon, Italy, obtained by expression","Huile essentielle de citron, Italie, obtenue par expression",1981-09-01,1,['71.100.60'],ISO/TC 54,9599,,"[5232,
• ISO 856:19815233,IS,,ISO 856:1981,"Oil of peppermint, France, Italy, United Kingdom and USA","Huile essentielle de menthe poivrée, France, Italie, Royaume-Uni et USA",1981-07-01,1,['71.100.60'
• ISO 857-1:199821099,IS,,ISO 857-1:1998,Welding and allied processes — Vocabulary — Part 1: Metal welding processes,Soudage et techniques connexes — Vocabulaire — Partie 1: Soudage des métaux,199
• ISO 857:19795235,IS,,ISO 857:1979,Definitions of welding processes,Définition des procédés de soudage,1979-11-01,1,"['25.160.10','25.160.50','01.040.25']",ISO/TC 44,9599,,[5236],"['en','fr']",
• ISO 857:19905236,IS,,ISO 857:1990,"Welding, brazing and soldering processes — Vocabulary",Procédés de soudage et de brasage — Vocabulaire,1990-07-12,2,"['25.160.10','25.160.50','01.040.25']",I
• ISO 860:19965240,IS,,ISO 860:1996,Terminology work — Harmonization of concepts and terms,Travaux terminologiques — Harmonisation des notions et des termes,1996-06-20,2,['01.020'],ISO/TC 37/SC
• ISO 863:19905245,IS,,ISO 863:1990,Cement — Test methods — Pozzolanicity test for pozzolanic cements,Ciments — Méthodes d'essai — Essai de pouzzolanicité des ciments pouzzolaniques,1990-04-05,1
• ISO 864:19755246,IS,,ISO 864:1975,"Solid wires for gas-shielded metal-arc welding of mild steel — Dimensions of wires, spools, rims and coils","Fils utilisés dans le soudage à l'arc de l'acier
• ISO 866:19755249,IS,,ISO 866:1975,Centre drills for centre holes without protecting chamfers — Type A,Forets à centrer pour centres sans chanfrein de protection — Type A,1975-02-01,1,['25.100.
• ISO 868:19785251,IS,,ISO 868:1978,Plastics — Determination of indentation hardness by means of a durometer (Shore hardness),Plastiques — Détermination de la dureté par pénétration au moyen d'u
• ISO 868:19855252,IS,,ISO 868:1985,Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness),Plastiques et ébonite — Détermination de la dureté par p
• ISO 871:19805255,IS,,ISO 871:1980,Plastics — Determination of temperature of evolution of flammable gases (decomposition temperature) from a small sample of pulverized material,Plastiques — Dé
• ISO 871:19965256,IS,,ISO 871:1996,Plastics — Determination of ignition temperature using a hot-air furnace,Plastiques — Détermination de la température d'allumage au moyen d'un four à air chau
• ISO 871:200640775,IS,,ISO 871:2006,Plastics — Determination of ignition temperature using a hot-air furnace,Plastiques — Détermination de la température d'allumage au moyen d'un four à air cha
• ISO 875:19815260,IS,,ISO 875:1981,Essential oils — Evaluation of miscibility in ethanol,Huiles essentielles — Évaluation de la miscibilité à l'éthanol,1981-07-01,1,['71.100.60'],ISO/TC 54,9599
• ISO 877-1:200941657,IS,,ISO 877-1:2009,Plastics — Methods of exposure to solar radiation — Part 1: General guidance,Plastiques — Méthodes d'exposition au rayonnement solaire — Partie 1: Lignes d
• ISO 877-2:200941658,IS,,ISO 877-2:2009,Plastics — Methods of exposure to solar radiation — Part 2: Direct weathering and exposure behind window glass,Plastiques — Méthodes d'exposition au rayonn
• ISO 877-3:200943425,IS,,ISO 877-3:2009,Plastics — Methods of exposure to solar radiation — Part 3: Intensified weathering using concentrated solar radiation,Plastiques — Méthodes d'exposition au
• ISO 877-3:201867566,IS,,ISO 877-3:2018,Plastics — Methods of exposure to solar radiation — Part 3: Intensified weathering using concentrated solar radiation,Plastiques — Méthodes d'exposition au
• ISO 877:19765262,IS,,ISO 877:1976,Plastics — Determination of resistance to change upon exposure under glass to daylight,Matières plastiques — Détermination de la résistance aux changements de
• ISO 877:19945263,IS,,ISO 877:1994,"Plastics — Methods of exposure to direct weathering, to weathering using glass-filtered daylight, and to intensified weathering by daylight using Fresnel mir
• ISO 882:19805268,IS,,ISO 882:1980,Cardamoms — Specification,"Cardamome de Malabar, Cardamome de Ceylan — Spécifications",1980-10-01,1,['67.220.10'],ISO/TC 34/SC 7,9599,,"[5269,5270]","['en','f
• ISO 883:19765271,IS,,ISO 883:1976,Indexable (throwaway) carbide inserts without fixation hole — Dimensions,"Plaquettes amovibles en carbures métalliques, sans trou de fixation — Dimensions",19
• ISO 883:19855272,IS,,ISO 883:1985,"Indexable hardmetal (carbide) inserts with rounded corners, without fixing hole — Dimensions","Plaquettes amovibles en métaux-durs (carbures métalliques) ave
• ISO 885:19765274,IS,,ISO 885:1976,General purpose bolts and screws — Metric series — Radii under the head,Boulons et vis d'application générale — Série métrique — Rayon d'arrondi sous tête,19
• ISO 887:19835276,IS,,ISO 887:1983,"Plain washers for metric bolts, screws and nuts — General plan",Rondelles plates pour boulonnerie métrique — Plan général,1983-09-01,1,['21.060.30'],ISO/TC 2
• ISO 888:19765278,IS,,ISO 888:1976,"Bolts, screws and studs — Nominal lengths, and thread lengths for general purpose bolts","Boulons, vis et goujons — Longueurs de tige nominales, et longueurs
• ISO 893:19785283,IS,,ISO 893:1978,Surface active agents — Technical sodium alkane sulphonates — Methods of analysis,Agents de surface — Alkylsulfonates de sodium techniques — Méthode d'analyse
• ISO 897:19735289,IS,,ISO 897:1973,Photography — Edge-marked roll film — Identification of the emulsion side,"Photographie — Pellicules en bobines, marquées sur les bords — Identification du cô
• ISO 897:19885290,IS,,ISO 897:1988,"Photography — Roll films, 126, 110 and 135 size films — Identification of the image-bearing side","Photographie — Films en bobines et films en formats 126, 1
• ISO 898-1:19785291,IS,,ISO 898-1:1978,"Mechanical properties of fasteners — Part 1: Bolts, screws and studs","Caractéristiques mécaniques des éléments de fixation — Partie 1: Boulons, vis et gou
• ISO 898-1:19885292,IS,,ISO 898-1:1988,"Mechanical properties of fasteners — Part 1: Bolts, screws and studs",Caractéristiques mécaniques des éléments de fixation — Partie 1: Vis et goujons,1988-
• ISO 898-1:199925452,IS,,ISO 898-1:1999,"Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs",Caractéristiques mécaniques des éléments de fix
• ISO 898-1:200943383,IS,,ISO 898-1:2009,"Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread
• ISO 898-2:19805293,IS,,ISO 898-2:1980,Mechanical properties of fasteners — Part 2: Nuts with specified proof load values,Caractéristiques mécaniques des éléments de fixation — Partie 2: Écrous a
• ISO 898-2:19925294,IS,,ISO 898-2:1992,Mechanical properties of fasteners — Part 2: Nuts with specified proof load values — Coarse thread,Caractéristiques mécaniques des éléments de fixation — Pa
• ISO 898-2:201246228,IS,,ISO 898-2:2012,Mechanical properties of fasteners made of carbon steel and alloy steel — Part 2: Nuts with specified property classes — Coarse thread and fine pitch threa
• ISO 898-4:19725296,IS,,ISO 898-4:1972,Withdrawal of ISO 898/4-1972,Annulation de l'ISO 898/4-1970,1972-08-01,1,['21.060.20'],ISO/TC 2,9599,,[5293],['en'],8
• ISO 898-5:19805297,IS,,ISO 898-5:1980,Mechanical properties of fasteners — Part 5: Set screws and similar threaded fasteners not under tensile stresses,Propriétés mécaniques des éléments de fixa
• ISO 898-5:199825453,IS,,ISO 898-5:1998,Mechanical properties of fasteners made of carbon steel and alloy steel — Part 5: Set screws and similar threaded fasteners not under tensile stresses,Cara
• ISO 898-6:19885298,IS,,ISO 898-6:1988,Mechanical properties of fasteners — Part 6: Nuts with specified proof load values — Fine pitch thread,Caractéristiques mécaniques des éléments de fixation
• ISO 898-6:19945299,IS,,ISO 898-6:1994,Mechanical properties of fasteners — Part 6: Nuts with specified proof load values — Fine pitch thread,Caractéristiques mécaniques des éléments de fixation
• ISO 899-1:19935302,IS,,ISO 899-1:1993,Plastics — Determination of creep behaviour — Part 1: Tensile creep,Plastiques — Détermination du comportement au fluage — Partie 1: Fluage en traction,1993
• ISO 899-1:200331262,IS,,ISO 899-1:2003,Plastics — Determination of creep behaviour — Part 1: Tensile creep,Plastiques — Détermination du comportement au fluage — Partie 1: Fluage en traction,200
• ISO 899-1:2003/Amd 1:201560781,IS,Amd,ISO 899-1:2003/Amd 1:2015,Plastics — Determination of creep behaviour — Part 1: Tensile creep — Amendment 1,Plastiques — Détermination du comportement au fluage — Part
• ISO 899-2:19935303,IS,,ISO 899-2:1993,Plastics — Determination of creep behaviour — Part 2: Flexural creep by three-point loading,Plastiques — Détermination du comportement au fluage — Partie 2:
• ISO 899-2:200331263,IS,,ISO 899-2:2003,Plastics — Determination of creep behaviour — Part 2: Flexural creep by three-point loading,Plastiques — Détermination du comportement au fluage — Partie 2
• ISO 899-2:2003/Amd 1:201560782,IS,Amd,ISO 899-2:2003/Amd 1:2015,Plastics — Determination of creep behaviour — Part 2: Flexural creep by three-point loading — Amendment 1,Plastiques — Détermination du compo
• ISO 899:19815301,IS,,ISO 899:1981,Plastics — Determination of tensile creep,Plastiques — Détermination du fluage en traction,1981-04-01,1,['83.080'],ISO/TC 61/SC 2,9599,,"[5302,5303]","['en','
• ISO 903:19765307,IS,,ISO 903:1976,Aluminium oxide primarily used for the production of aluminium — Determination of untamped density,Oxyde d'aluminium principalement utilisé pour la production
• ISO 917:19745326,IS,,ISO 917:1974,Testing of refrigerant compressors,Essais des compresseurs pour fluides frigorigènes,1974-09-01,1,['27.200'],ISO/TC 86,9599,,[5327],"['en','fr']",28
• ISO 917:19895327,IS,,ISO 917:1989,Testing of refrigerant compressors,Essais des compresseurs pour fluides frigorigènes,1989-08-31,2,['27.200'],ISO/TC 86/SC 4,9599,[5326],"[85541,22686,53762]",
• ISO 921:19725332,IS,,ISO 921:1972,Nuclear energy glossary,Vocabulaire de l'énergie nucléaire,1972-11-01,1,"['01.040.27','27.120.01']",ISO/TC 85,9599,,[5333],"['en','fr','ru']",116
• ISO 921:1972/Add 1:19805334,IS,Add,ISO 921:1972/Add 1:1980,Nuclear energy glossary — Addendum 1,Vocabulaire de l'énergie nucléaire — Additif 1,1980-10-01,1,"['01.040.27','27.120.01']",ISO/TC 85,9599,,[53
• ISO 921:1972/Add 2:19845335,IS,Add,ISO 921:1972/Add 2:1984,Nuclear energy glossary — Addendum 2,Vocabulaire de l'énergie nucléaire — Additif 2,1984-09-01,1,"['01.040.27','27.120.01']",ISO/TC 85,9599,,[53
• ISO 921:1972/Add 3:19845336,IS,Add,ISO 921:1972/Add 3:1984,Nuclear energy glossary — Addendum 3,Vocabulaire de l'énergie nucléaire — Additif 3,1984-09-01,1,"['01.040.27','27.120.01']",ISO/TC 85,9599,,[53
• ISO 923:19755338,IS,,ISO 923:1975,Coal cleaning tests — Expression and presentation of results,Essais d'épuration du charbon — Expression et représentation des résultats,1975-12-01,1,['73.040'
• ISO 923:20001590,IS,,ISO 923:2000,Coal cleaning equipment — Performance evaluation,Équipement pour l'épuration du charbon — Évaluation des résultats,2000-06-01,2,['73.120'],ISO/TC 27/SC 1,9599
• ISO 924:19755339,IS,,ISO 924:1975,Coal preparation plant — Principles and conventions for flowsheets,Ateliers de préparation du charbon — Principes et conventions concernant les schémas de tra
• ISO 924:19895340,IS,,ISO 924:1989,Coal preparation plant — Principles and conventions for flowsheets,Ateliers de préparation du charbon — Principes et conventions relatifs aux schémas de trait
• ISO 925:19805341,IS,,ISO 925:1980,Solid mineral fuels — Determination of carbon dioxide content — Gravimetric method,Combustibles minéraux solides — Dosage du dioxyde de carbone — Méthode grav
• ISO 925:199723282,IS,,ISO 925:1997,Solid mineral fuels — Determination of carbonate carbon content — Gravimetric method,Combustibles minéraux solides — Dosage du carbone sous forme de carbonat
• ISO 927:19825343,IS,,ISO 927:1982,Spices and condiments — Determination of extraneous matter content,Épices — Détermination de la teneur en matières étrangères,1982-12-01,2,['67.220.10'],ISO/T
• ISO 928:19805345,IS,,ISO 928:1980,Spices and condiments — Determination of total ash,Épices — Détermination des cendres totales,1980-02-01,1,['67.220.10'],ISO/TC 34/SC 7,9599,,[26525],"['en','
• ISO 929:19805346,IS,,ISO 929:1980,Spices and condiments — Determination of water-insoluble ash,Épices — Détermination des cendres insolubles dans l'eau,1980-02-01,1,['67.220.10'],ISO/TC 34/SC
• ISO 930:19805348,IS,,ISO 930:1980,Spices and condiments — Determination of acid-insoluble ash,Épices — Détermination des cendres insolubles dans l'acide,1980-02-01,1,['67.220.10'],ISO/TC 34/SC
• ISO 936:19785355,IS,,ISO 936:1978,Meat and meat products — Determination of ash (Reference method),Viandes et produits à base de viande — Détermination des cendres — (Méthode de référence),197
• ISO 937:19785356,IS,,ISO 937:1978,Meat and meat products — Determination of nitrogen content (Reference method),Viandes et produits à base de viande — Détermination de la teneur en azote (Méth
• ISO 939:19805358,IS,,ISO 939:1980,Spices and condiments — Determination of moisture content — Entrainment method,Épices — Détermination de la teneur en eau — Méthode par entraînement,1980-05-0
• ISO 945-1:200841501,IS,,ISO 945-1:2008,Microstructure of cast irons — Part 1: Graphite classification by visual analysis,Microstructure des fontes — Partie 1: Classification du graphite par anal
• ISO 945-1:2008/Cor 1:201055897,IS,Cor,ISO 945-1:2008/Cor 1:2010,Microstructure of cast irons — Part 1: Graphite classification by visual analysis — Technical Corrigendum 1,Microstructure des fontes — Parti
• ISO 945-1:201766644,IS,,ISO 945-1:2017,Microstructure of cast irons — Part 1: Graphite classification by visual analysis,Microstructure des fontes — Partie 1: Classification du graphite par anal
• ISO 945:19755365,IS,,ISO 945:1975,Cast iron — Designation of microstructure of graphite,Fonte — Désignation de la microstructure du graphite,1975-11-01,1,['77.080.10'],ISO/TC 25,9599,,"[35127,
• ISO 946:19755366,IS,,ISO 946:1975,Grey cast iron — Beam unnotched impact test,Fonte grise — Essai de choc sur éprouvette non entaillée,1975-11-01,1,['77.040.10'],ISO/TC 25,9599,,[36166],"['en'
• ISO 949:19785370,IS,,ISO 949:1978,Cauliflowers — Guide to cold storage,Choux-fleurs — Guide pour l'entreposage par réfrigération,1978-12-01,1,['67.080.20'],ISO/TC 34,9599,,[5371],"['en','fr']"
• ISO 950:19795372,IS,,ISO 950:1979,Cereals — Sampling (as grain),Céréales — Échantillonnage (des grains),1979-09-01,1,['67.060'],ISO/TC 34/SC 4,9599,,[22637],"['en','fr']",6
• ISO 951:19795374,IS,,ISO 951:1979,Pulses in bags — Sampling,Légumineuses en sacs — Échantillonnage,1979-09-01,1,['67.060'],ISO/TC 34/SC 4,9599,,[22637],"['en','fr']",6
• ISO 959-1:19895384,IS,,ISO 959-1:1989,"Pepper (Piper nigrum Linnaeus), whole or ground — Specification — Part 1: Black pepper","Poivre (Piper nigrum Linnaeus), entier ou en poudre — Spécificatio
• ISO 959-1:199827319,IS,,ISO 959-1:1998,"Pepper (Piper nigrum L.), whole or ground — Specification — Part 1: Black pepper","Poivre (Piper nigrum L.), entier ou en poudre — Spécifications — Partie
• ISO 959-2:19895385,IS,,ISO 959-2:1989,"Pepper (Piper nigrum Linnaeus), whole or ground — Specification — Part 2: White pepper","Poivre (Piper nigrum Linnaeus), entier ou en poudre — Spécificatio
• ISO 959-2:199827320,IS,,ISO 959-2:1998,"Pepper (Piper nigrum L.), whole or ground — Specification — Part 2: White pepper","Poivre (Piper nigrum L.), entier ou en poudre — Spécifications — Partie
• ISO 960:19885387,IS,,ISO 960:1988,Plastics — Polyamides (PA) — Determination of water content,Plastiques — Polyamides (PA) — Détermination de la teneur en eau,1988-08-18,1,['83.080.20'],ISO/TC
• ISO 965-1:19805392,IS,,ISO 965-1:1980,ISO general purpose metric screw threads — Tolerances — Part 1: Principles and basic data,Filetages métriques ISO pour usages généraux — Tolérances — Partie
• ISO 965-1:19985393,IS,,ISO 965-1:1998,ISO general-purpose metric screw threads — Tolerances — Part 1: Principles and basic data,Filetages métriques ISO pour usages généraux — Tolérances — Partie
• ISO 965-1:1998/Cor 1:200954554,IS,Cor,ISO 965-1:1998/Cor 1:2009,ISO general-purpose metric screw threads — Tolerances — Part 1: Principles and basic data — Technical Corrigendum 1,Filetages métriques ISO p
• ISO 965-1:201357778,IS,,ISO 965-1:2013,ISO general purpose metric screw threads — Tolerances — Part 1: Principles and basic data,Filetages métriques ISO pour usages généraux — Tolérances — Parti
• ISO 965-1:2013/Amd 1:202180920,IS,Amd,ISO 965-1:2013/Amd 1:2021,ISO general purpose metric screw threads — Tolerances — Part 1: Principles and basic data — Amendment 1,Filetages métriques ISO pour usages g
• ISO 965-2:19805395,IS,,ISO 965-2:1980,ISO general purpose metric screw threads — Tolerances — Part 2: Limits of sizes for general purpose bolt and nut threads — Medium quality,Filetages métrique
• ISO 965-2:199823594,IS,,ISO 965-2:1998,ISO general purpose metric screw threads — Tolerances — Part 2: Limits of sizes for general purpose external and internal screw threads — Medium quality,Fi
• ISO 965-2:1998/Amd 1:202180921,IS,Amd,ISO 965-2:1998/Amd 1:2021,ISO general purpose metric screw threads — Tolerances — Part 2: Limits of sizes for general purpose external and internal screw threads — Med
• ISO 965-3:19805396,IS,,ISO 965-3:1980,ISO general purpose metric screw threads — Tolerances — Part 3: Deviations for constructional threads,Filetages métriques ISO pour usages généraux — Toléran
• ISO 965-3:19985397,IS,,ISO 965-3:1998,ISO general purpose metric screw threads — Tolerances — Part 3: Deviations for constructional screw threads,Filetages métriques ISO pour usages généraux — T
• ISO 965-3:1998/Cor 1:200954555,IS,Cor,ISO 965-3:1998/Cor 1:2009,ISO general purpose metric screw threads — Tolerances — Part 3: Deviations for constructional screw threads — Technical Corrigendum 1,Filetag
• ISO 965-4:19985398,IS,,ISO 965-4:1998,ISO general purpose metric screw threads — Tolerances — Part 4: Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw th
• ISO 965-4:202180923,IS,,ISO 965-4:2021,ISO general purpose metric screw threads — Tolerances — Part 4: Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw t
• ISO 965-5:19985399,IS,,ISO 965-5:1998,ISO general purpose metric screw threads — Tolerances — Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw th
• ISO 965-5:1998/Amd 1:202180924,IS,Amd,ISO 965-5:1998/Amd 1:2021,ISO general purpose metric screw threads — Tolerances — Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized ex
• ISO 972:19855407,IS,,ISO 972:1985,"Chillies and capsicums, whole or ground (powdered) — Specification",Piments dits 'Piments enragés' et piments forts entiers ou en poudre — Spécifications,198
• ISO 973:19805409,IS,,ISO 973:1980,"Spices and condiments — Pimento (allspice), whole or ground — Specification","Épices — Piment, type Jamaïque, entier ou en poudre — Spécifications",1980-09-0
• ISO 973:199926523,IS,,ISO 973:1999,"Pimento (allspice) [Pimenta dioica (L.) Merr.], whole or ground — Specification","Piment type Jamaïque [Pimenta dioica (L.) Merr.], entier ou en poudre — Sp
• ISO 974:19805410,IS,,ISO 974:1980,Plastics — Determination of the brittleness temperature by impact,Plastiques — Détermination de la température de fragilité au choc,1980-06-01,1,['83.080.01']
• ISO 975:19755411,IS,,ISO 975:1975,Brown coals and lignites — Determination of yield of benzene-soluble extract,Charbons bruns et lignites — Détermination du rendement en extrait de benzène sol
• ISO 975:19855412,IS,,ISO 975:1985,Brown coals and lignites — Determination of yield of toluene-soluble extract,Charbons bruns et lignites — Détermination du rendement en extrait de toluène sol
• ISO 975:200020409,IS,,ISO 975:2000,Brown coals and lignites — Determination of yield of benzene-soluble extract — Semi-automatic method,Charbons bruns et lignites — Détermination du rendement
• ISO 975:201363042,IS,,ISO 975:2013,Brown coals and lignites — Determination of yield of benzene-soluble extract — Semi-automatic method,Charbons bruns et lignites — Détermination du rendement
• ISO 976:19775413,IS,,ISO 976:1977,Rubber latices — Determination of pH,Latex de caoutchouc — Détermination du pH,1977-05-01,1,['83.040.10'],ISO/TC 45,9599,,[5414],['en'],2
• ISO 976:19865414,IS,,ISO 976:1986,Rubber latices — Determination of pH,Latex de caoutchouc — Détermination du pH,1986-07-10,2,['83.040.10'],ISO/TC 45/SC 3,9599,[5413],[20182],"['en','fr']",2
• ISO 976:199620182,IS,,ISO 976:1996,Rubber and plastics — Polymer dispersions and rubber latices — Determination of pH,Caoutchouc et plastiques — Dispersions de polymères et latex de caoutchouc
• ISO 976:1996/Amd 1:200642829,IS,Amd,ISO 976:1996/Amd 1:2006,Rubber and plastics — Polymer dispersions and rubber latices — Determination of pH — Amendment 1: Precision data,Caoutchouc et plastiques — Dis
• ISO 983:19745422,IS,,ISO 983:1974,"Sodium hydroxide for industrial use — Determination of iron content — 1,10- Phenanthroline photometric method","Hydroxyde de sodium à usage industriel — Dosa
• ISO 984:19745424,IS,,ISO 984:1974,Sodium hydroxide for industrial use — Determination of silica content — Reduced silico-molybdic complex photometric method,Hydroxyde de sodium à usage industr
• ISO 986:19765427,IS,,ISO 986:1976,Sodium hydroxide for industrial use — Determination of calcium content — EDTA (disodium salt) complexometric method,Hydroxyde de sodium à usage industriel —
• ISO 994:19735437,IS,,ISO 994:1973,"Potassium hydroxide for industrial use — Determination of iron content — 1,10- Phenanthroline photometric method","Hydroxyde de potassium à usage industriel
• ISO 995:19755439,IS,,ISO 995:1975,Potassium hydroxide for industrial use — Determination of silica content — Reduced molybdosilicate photometric method,Hydroxyde de potassium à usage industrie
• ISO 997:19765442,IS,,ISO 997:1976,Potassium hydroxide for industrial use — Determination of calcium content — EDTA (disodium salt) complexometric method,Hydroxyde de potassium à usage industr
• ISO 999:19755445,IS,,ISO 999:1975,Documentation — Index of a publication,Documentation — Index d'une publication,1975-09-01,1,['01.140.40'],ISO/TC 46/SC 9,9599,,[5446],"['en','fr']",2
• ISO 1000:19815447,IS,,ISO 1000:1981,SI units and recommendations for the use of their multiples and of certain other units,Unités SI et recommandations pour l'emploi de leurs multiples et de ce
• ISO 1000:19925448,IS,,ISO 1000:1992,SI units and recommendations for the use of their multiples and of certain other units,Unités SI et recommandations pour l'emploi de leurs multiples et de ce
• ISO 1000:1992/Amd 1:199828985,IS,Amd,ISO 1000:1992/Amd 1:1998,SI units and recommendations for the use of their multiples and of certain other units — Amendment 1,Unités SI et recommandations pour l'emplo
• ISO 1001:19795449,IS,,ISO 1001:1979,Information processing — Magnetic tape labelling and file structure for information interchange,Traitement de l'information — Étiquetage des bandes magnétiqu
• ISO 1001:19865450,IS,,ISO 1001:1986,Information processing — File structure and labelling of magnetic tapes for information interchange,Structure de fichiers et étiquetage des bandes magnétique
• ISO 1003:19805454,IS,,ISO 1003:1980,"Spices and condiments — Ginger, whole, in pieces, or ground — Specification","Épices — Gingembre entier, en morceaux ou en poudre — Spécifications",1980-09-
• ISO 1003:200836677,IS,,ISO 1003:2008,Spices — Ginger (Zingiber officinale Roscoe) — Specification,Épices — Gingembre (Zingiber officinale Roscoe) — Spécifications,2008-05-19,2,['67.220.10'],ISO
• ISO 1004:19955457,IS,,ISO 1004:1995,Information processing — Magnetic ink character recognition — Print specifications,Traitement de l'information — Reconnaissance des caractères à encre magnét
• ISO 1005-1:19825458,IS,,ISO 1005-1:1982,Railway rolling stock material — Part 1: Rough-rolled tyres for tractive and trailing stock — Quality requirements,Matériel roulant de chemin de fer — Part
• ISO 1005-6:19825465,IS,,ISO 1005-6:1982,Railway rolling stock material — Part 6: Solid wheels for tractive and trailing stock — Quality requirements,Matériel roulant de chemin de fer — Partie 6:
• ISO 1006:19835470,IS,,ISO 1006:1983,Building construction — Modular coordination — Basic module,Construction immobilière — Coordination modulaire — Module de base,1983-11-01,2,['91.010.30'],ISO
• ISO 1007:19795471,IS,,ISO 1007:1979,Photography — 135-size film and magazine — Specification,Photographie — Film et cartouche de format 135 — Spécifications,1979-12-01,1,['37.040.20'],ISO/TC 42
• ISO 1007:19955472,IS,,ISO 1007:1995,Photography — 135-size film and magazine — Specifications,Photographie — Film et cartouche de format 135 — Spécifications,1995-10-12,2,['37.040.20'],ISO/TC 4
• ISO 1008:19735473,IS,,ISO 1008:1973,Photography — Black-and-white paper for general use — Sizes of sheet material,Photographie — Papiers en noir et blanc pour usage général — Dimensions des feu
• ISO 1008:19925474,IS,,ISO 1008:1992,Photography — Paper dimensions — Pictorial sheets,Photographie — Dimension des papiers — Papiers en feuilles pour usage général,1992-01-23,2,['37.040.20'],IS
• ISO 1009:19735475,IS,,ISO 1009:1973,Photography — Black-and-white paper for roll paper printers — Sizes of rolls,"Photographie — Papiers en noir et blanc, sur bobines, pour tireuses — Dimension
• ISO 1009:19925476,IS,,ISO 1009:1992,Photography — Paper dimensions — Rolls for printers,Photographie — Dimensions des papiers — Rouleaux pour tireuses,1992-01-23,2,"['37.040.20','37.100.20']",I
• ISO 1010:19735477,IS,,ISO 1010:1973,Photography — Colour paper for general use — Sizes of sheet material,Photographie — Papiers en couleurs pour usage général — Dimensions des feuilles,1973-09-
• ISO 1011:19735478,IS,,ISO 1011:1973,Photography — Colour paper for roll paper printers — Sizes of rolls,"Photographie — Papiers en couleurs, sur bobines, pour tireuses — Dimensions des bobines"
• ISO 1012:19735479,IS,,ISO 1012:1973,Photography — Colour film for general use — Sizes of sheet material,Photographie — Films semi-rigides en couleurs pour usage général — Dimensions,1973-09-01,
• ISO 1012:19915480,IS,,ISO 1012:1991,Photography — Film dimensions — Pictorial sheets,Photographie — Dimensions des films — Films en feuilles pour prise de vue,1991-05-16,2,['37.040.20'],ISO/TC
• ISO 1013:19755481,IS,,ISO 1013:1975,Coke — Determination of bulk density in a large container,Coke — Détermination de la masse volumique en vrac dans un récipient de grandes dimensions,1975-11-
• ISO 1013:19951968,IS,,ISO 1013:1995,Coke — Determination of bulk density in a large container,Coke — Détermination de la masse volumique en vrac dans un récipient de grandes dimensions,1995-06-
• ISO 1014:19755482,IS,,ISO 1014:1975,"Coke — Determination of true relative density, apparent relative density and porosity","Coke — Détermination de la densité relative vraie, de la densité rel
• ISO 1014:19855483,IS,,ISO 1014:1985,"Coke — Determination of true relative density, apparent relative density and porosity","Coke — Détermination de la densité relative vraie, de la densité rel
• ISO 1014:202179750,IS,,ISO 1014:2021,"Coke — Determination of true relative density, apparent relative density and porosity","Coke — Détermination de la densité relative vraie, de la densité re
• ISO 1015:19755484,IS,,ISO 1015:1975,Brown coals and lignites — Determination of moisture content — Direct volumetric method,Charbons bruns et lignites — Détermination de l'humidité — Méthode vo
• ISO 1017:19755486,IS,,ISO 1017:1975,Brown coals and lignites — Determination of acetone-soluble material ('resinous substances') in the benzene extract,Charbons bruns et lignites — Déterminatio
• ISO 1017:19855487,IS,,ISO 1017:1985,Brown coals and lignites — Determination of acetone-soluble material ('resinous substances') in the toluene-soluble extract,Charbons bruns et lignites — Déte
• ISO 1017:200641353,IS,,ISO 1017:2006,Brown coals and lignites — Determination of acetone-soluble material ('resinous substance') in the benzene-soluble extract,Charbons bruns et lignites — Déte
• ISO 1018:19755488,IS,,ISO 1018:1975,Hard coal — Determination of moisture-holding capacity,Houille — Détermination de la capacité de rétention d'humidité,1975-11-01,1,['73.040'],ISO/TC 27/SC 5,
• ISO 1018:201974448,IS,,ISO 1018:2019,Hard coal — Determination of moisture-holding capacity,Houille — Détermination de la capacité de rétention d'humidité,2019-09-30,2,['73.040'],ISO/TC 27/SC 5
• ISO 1022:19885493,IS,,ISO 1022:1988,Aerospace — Gaseous oxygen replenishment connection for use in fluid systems (old type) — Dimensions (Inch series) (Not valid for new designs),Aéronautique e
• ISO 1023:19745494,IS,,ISO 1023:1974,Aircraft — High pressure air charging valves,Aéronefs — Raccords pour l'alimentation en air à haute pression,1974-07-01,1,"['49.100','49.080']",ISO/TC 20/SC
• ISO 1024:19895496,IS,,ISO 1024:1989,"Metallic materials — Hardness test — Rockwell superficial test (scales 15N, 30N, 45N, 15T, 30T and 45T)","Matériaux métalliques — Essai de dureté — Essai su
• ISO 1025:19815497,IS,,ISO 1025:1981,Textile machinery and accessories — Sectional beams for warp knitting machines — Terminology and main dimensions,Matériel pour l'industrie textile — Ensouple
• ISO 1027:19835499,IS,,ISO 1027:1983,Radiographic image quality indicators for non-destructive testing — Principles and identification,Indicateurs de qualité d'image radiographique pour les essa
• ISO 1028:19735500,IS,,ISO 1028:1973,Information processing — Flowchart symbols,Traitement de l'information — Symboles d'organigramme,1973-12-01,1,"['01.080.50','35.080']",ISO/IEC JTC 1/SC 2,959
• ISO 1032:19745504,IS,,ISO 1032:1974,Coniferous sawn timber — Sizes — Terms and definitions,Sciages de bois résineux — Dimensions — Termes et définitions,1974-12-01,1,"['79.040','01.040.79']",IS
• ISO 1035-1:19805507,IS,,ISO 1035-1:1980,Hot-rolled steel bars — Part 1: Dimensions of round bars,Barres en acier laminées à chaud — Partie 1: Dimensions des barres rondes,1980-10-01,1,['77.140.60
• ISO 1035-2:19805508,IS,,ISO 1035-2:1980,Hot-rolled steel bars — Part 2: Dimensions of square bars,Barres en acier laminées à chaud — Partie 2: Dimensions des barres carrées,1980-10-01,1,['77.140.
• ISO 1035-3:19805509,IS,,ISO 1035-3:1980,Hot-rolled steel bars — Part 3: Dimensions of flat bars,Barres en acier laminées à chaud — Partie 3: Dimensions des barres plates,1980-11-01,1,['77.140.60'
• ISO 1035-4:19825510,IS,,ISO 1035-4:1982,Hot-rolled steel bars — Part 4: Tolerances,Barres en acier laminées à chaud — Partie 4: Tolérances,1982-08-01,2,['77.140.60'],ISO/TC 17/SC 3,9599,,[89682],
• ISO 1036:19765511,IS,,ISO 1036:1976,Textile machinery and accessories — Dyeing and finishing machines — Definition of left and right sides,Matériel pour l'industrie textile — Machines de teintu
• ISO 1037:19825513,IS,,ISO 1037:1982,Textile machinery and accessories — Beams for dyeing slivers and yarn — Terminology and main dimensions,Matériel pour l'industrie textile — Ensouples de tein
• ISO 1039:19755515,IS,,ISO 1039:1975,Cinematography — Cores for motion-picture and magnetic film rolls — Dimensions,Cinématographie — Noyaux pour bobines de films cinématographiques et magnétiqu
• ISO 1039:19885516,IS,,ISO 1039:1988,Cinematography — Cores for motion-picture and magnetic film rolls — Dimensions,Cinématographie — Noyaux pour films cinématographique et magnétique — Dimensio
• ISO 1040:19835517,IS,,ISO 1040:1983,Building construction — Modular coordination — Multimodules for horizontal coordinating dimensions,Construction immobilière — Coordination modulaire — Multim
• ISO 1042:19835519,IS,,ISO 1042:1983,Laboratory glassware — One-mark volumetric flasks,Verrerie de laboratoire — Fioles jaugées à un trait,1983-02-01,3,['17.060'],ISO/TC 48,9599,,[25484],"['en',
• ISO 1043-1:19875522,IS,,ISO 1043-1:1987,Plastics — Symbols — Part 1: Basic polymers and their special characteristics,Plastiques — Symboles — Partie 1: Polymères de base et leurs caractéristiques
• ISO 1043-1:19975523,IS,,ISO 1043-1:1997,Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics,Plastiques — Symboles et abréviations — Partie 1: Polym
• ISO 1043-1:200129758,IS,,ISO 1043-1:2001,Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics,Plastiques — Symboles et termes abrégés — Partie 1: Po
• ISO 1043-2:19885524,IS,,ISO 1043-2:1988,Plastics — Symbols — Part 2: Fillers and reinforcing materials,Plastiques — Symboles — Partie 2: Charges et matériaux de renforcement,1988-10-13,1,"['59.10
• ISO 1043-2:200029756,IS,,ISO 1043-2:2000,Plastics — Symbols and abbreviated terms — Part 2: Fillers and reinforcing materials,Plastiques — Symboles et abréviations — Partie 2: Charges et matériau
• ISO 1043-3:19885525,IS,,ISO 1043-3:1988,Plastics — Symbols — Part 3: Plasticizers,Plastiques — Symboles — Partie 3: Plastifiants,1988-10-13,1,['83.040.30'],ISO/TC 61/SC 1,9599,[5520],[20136],"['e
• ISO 1043-3:199620136,IS,,ISO 1043-3:1996,Plastics — Symbols and abbreviated terms — Part 3: Plasticizers,Plastiques — Symboles et abréviations — Partie 3: Plastifiants,1996-04-25,2,"['83.080.01',
• ISO 1043-4:199824297,IS,,ISO 1043-4:1998,Plastics — Symbols and abbreviated terms — Part 4: Flame retardants,Plastiques — Symboles et abréviations — Partie 4: Ignifuges,1998-02-12,1,"['83.080.01'
• ISO 1043-4:1998/Amd 1:201665281,IS,Amd,ISO 1043-4:1998/Amd 1:2016,Plastics — Symbols and abbreviated terms — Part 4: Flame retardants — Amendment 1: Code numbers,Plastiques — Symboles et abréviations — Part
• ISO 1043:19785520,IS,,ISO 1043:1978,Plastics — Symbols,Plastiques — Symboles,1978-12-01,2,['83.080.01'],ISO/TC 61,9599,,"[5522,5524,5525]","['en','fr']",4
• ISO 1044:19755526,IS,,ISO 1044:1975,Industrial trucks — Traction batteries for electric trucks — Voltages,Chariots de manutention — Batteries de traction des chariots électriques — Tensions,197
• ISO 1044:19855527,IS,,ISO 1044:1985,Industrial trucks — Traction batteries for electric trucks — Voltages,Chariots de manutention — Batteries de traction des chariots électriques — Tensions,198
• ISO 1046:19735530,IS,,ISO 1046:1973,Architectural and building drawings — Vocabulary,Dessins de bâtiment et d'architecture — Vocabulaire,1973-11-01,3,"['01.100.30','01.040.01']",ISO/TC 10,9599,
• ISO 1048:19735532,IS,,ISO 1048:1973,Photography — Exposed colour roll film — Identification,"Photographie — Pellicules en couleurs, sur bobines, exposées — Identification",1973-10-01,1,['37.040
• ISO 1048:19915533,IS,,ISO 1048:1991,Photography — Exposed roll films — Identification,"Photographie — Pellicules en bobines, exposées — Identification",1991-11-28,2,['37.040.20'],ISO/TC 42,9599
• ISO 1052:19825538,IS,,ISO 1052:1982,Steels for general engineering purposes,Aciers de construction mécanique d'usage général,1982-11-01,1,['77.140.01'],ISO/TC 17/SC 3,9599,,[32147],"['en','fr']
• ISO 1055:19755541,IS,,ISO 1055:1975,Zinc and zinc alloys — Determination of iron content — Spectrophotometric method,Zinc et alliages de zinc — Dosage du fer — Méthode spectrophotométrique,1975
• ISO 1056:19755542,IS,,ISO 1056:1975,Withdrawal of ISO 1056:1975,Annulation de l'ISO 1056:1975,1975-02-01,1,['25.040.20'],ISO/IEC JTC 1,9599,,[13540],"['en','fr']",10
• ISO 1057:19735544,IS,,ISO 1057:1973,Withdrawal of ISO 1057-1973,Annulation de l'ISO 1057-1973,1973-12-01,1,['25.040.20'],ISO/IEC JTC 1,9599,,[13540],"['en','fr']",10
• ISO 1058:19735545,IS,,ISO 1058:1973,Withdrawal of ISO 1058-1973,Annulation de l'ISO 1058-1973,1973-12-01,1,['25.040.20'],ISO/IEC JTC 1,9599,,[13540],"['en','fr']",10
• ISO 1059:19735546,IS,,ISO 1059:1973,Withdrawal of ISO 1059-1973,Annulation de l'ISO1059-1973,1973-12-01,1,['25.040.20'],ISO/IEC JTC 1,9599,,[13540],"['en','fr']",9
• ISO 1060-1:19825548,IS,,ISO 1060-1:1982,Plastics — Homopolymer and copolymer resins of vinyl chloride — Part 1: Designation,Plastiques — Résines d'homopolymères et de copolymères de chlorure de v
• ISO 1060-1:199825189,IS,,ISO 1060-1:1998,Plastics — Homopolymer and copolymer resins of vinyl chloride — Part 1: Designation system and basis for specifications,Plastiques — Résines d'homopolymèr
• ISO 1060-2:19785549,IS,,ISO 1060-2:1978,Plastics — Homopolymer and copolymer resins of vinyl chloride — Part 2: Determination of properties,Plastiques — Résines d'homopolymères et de copolymères
• ISO 1060-2:19855550,IS,,ISO 1060-2:1985,Plastics — Homopolymer and copolymer resins of vinyl chloride — Part 2: Determination of properties,Plastiques — Résines d'homopolymères et de copolymères
• ISO 1060-2:199825190,IS,,ISO 1060-2:1998,Plastics — Homopolymer and copolymer resins of vinyl chloride — Part 2: Preparation of test samples and determination of properties,Plastiques — Résines d
• ISO 1060:19755547,IS,,ISO 1060:1975,Withdrawal of ISO 1060-1975,Annulation de l'ISO 1060-1975,1975-06-01,1,['83.080.20'],ISO/TC 61,9599,,[5548],['en'],3
• ISO 1061:19755552,IS,,ISO 1061:1975,Plastics — Unplasticized cellulose acetate — Determination of free acidity,Matières plastiques — Acétate de cellulose non plastifié — Détermination de l'acid
• ISO 1065:19755557,IS,,ISO 1065:1975,Non-ionic surface active agents obtained from ethylene oxide — Determination of cloud temperature (cloud point),Agents de surface non ioniques obtenus à part
• ISO 1070:19735563,IS,,ISO 1070:1973,Liquid flow measurement in open channels — Slope-area method,Mesure de débit des liquides dans les canaux découverts — Méthode de la pente de la ligne d'eau,
• ISO 1070:19925564,IS,,ISO 1070:1992,Liquid flow measurement in open channels — Slope-area method,Mesure de débit des liquides dans les canaux découverts — Méthode de la pente de la ligne d'eau,
• ISO 1070:1992/Amd 1:199727608,IS,Amd,ISO 1070:1992/Amd 1:1997,Liquid flow measurement in open channels — Slope-area method — Amendment 1,Mesure de débit des liquides dans les canaux découverts — Méthode d
• ISO 1071:19835565,IS,,ISO 1071:1983,Covered electrodes for manual arc welding of cast iron — Symbolization,Électrodes enrobées pour le soudage manuel à l'arc des fontes — Symbolisation,1983-12-
• ISO 1071:200332098,IS,,ISO 1071:2003,"Welding consumables - Covered electrodes, wires, rods and tubular cored electrodes for fusion welding of cast iron - Classification","Produits consommables
• ISO 1074:19755569,IS,,ISO 1074:1975,Counterbalanced lift trucks — Stability — Basic tests,Chariots élévateurs travaillant en porte-à-faux — Stabilité — Essais de base,1975-10-01,1,['53.060'],IS
• ISO 1074:19915570,IS,,ISO 1074:1991,Counterbalanced fork-lift trucks — Stability tests,Chariots élévateurs à fourche travaillant en porte-à-faux — Essais de stabilité,1991-03-21,2,['53.060'],IS
• ISO 1079:19895576,IS,,ISO 1079:1989,"Metallic materials — Hardness test — Verification of Rockwell superficial hardness testing machines (scales 15N, 30N, 45N, 15T, 30T and 45T)","Matériaux mét
• ISO 1081:19805578,IS,,ISO 1081:1980,Drives using V-belts and grooved pulleys — Terminology,Transmissions par courroies trapézoïdales et poulies à gorges — Terminologie,1980-08-01,1,"['21.220.10
• ISO 1081:19955579,IS,,ISO 1081:1995,"Belt drives — V-belts and V-ribbed belts, and corresponding grooved pulleys — Vocabulary","Transmissions par courroies — Courroies trapézoïdales et striées,
• ISO 1082:19845580,IS,,ISO 1082:1984,Mining — Shackle type connector units for chain conveyors,Exploitation minière — Étriers de raccordement pour chaînes de convoyeurs,1984-06-01,1,"['53.040.20
• ISO 1083:19765582,IS,,ISO 1083:1976,Spheroidal graphite or nodular graphite cast iron,Fonte à graphite sphéroïdal ou à graphite nodulaire,1976-11-01,1,['77.080.10'],ISO/TC 25,9599,,[5583],"['en
• ISO 1083:19875583,IS,,ISO 1083:1987,Spheroidal graphite cast iron — Classification,Fonte à graphite sphéroïdal — Classification,1987-10-01,2,['77.080.10'],ISO/TC 25,9599,[5582],[33243],"['en','
• ISO 1083:200433243,IS,,ISO 1083:2004,Spheroidal graphite cast irons - Classification,Fontes à graphite sphéroïdal — Classification,2004-07-16,3,['77.080.10'],ISO/TC 25,9599,[5583],[66643],"['en
• ISO 1084:19755585,IS,,ISO 1084:1975,Industrial tractors — Definition and nominal rating,Tracteurs industriels — Définition et force nominale,1975-10-01,1,['53.060'],ISO/TC 110,9599,,[29703],"['
• ISO 1085:19745586,IS,,ISO 1085:1974,Combinations of double-ended wrench gaps,Appariement des ouvertures de clés doubles de serrage,1974-11-01,1,['25.140.30'],ISO/TC 29,9599,,[5587],"['en','fr']
• ISO 1085:19865587,IS,,ISO 1085:1986,Assembly tools for screws and nuts — Double-ended wrenches — Size pairing,Outils de manoeuvre pour vis et écrous — Clés doubles de serrage — Appariement des
• ISO 1085:199928548,IS,,ISO 1085:1999,Assembly tools for screws and nuts — Double-ended wrenches — Size pairing,Outils de manoeuvre pour vis et écrous — Clés doubles de serrage — Appariement des
• ISO 1086:19755588,IS,,ISO 1086:1975,Documentation — Title-leaves of a book,Documentation — Feuillets de titre d'un livre,1975-08-01,1,['01.140.40'],ISO/TC 46/SC 9,9599,,[5589],"['en','fr']",2
• ISO 1087-1:200020057,IS,,ISO 1087-1:2000,Terminology work — Vocabulary — Part 1: Theory and application,Travaux terminologiques — Vocabulaire — Partie 1: Théorie et application,2000-10-26,1,"['01
• ISO 1087:19905591,IS,,ISO 1087:1990,Terminology — Vocabulary,Terminologie — Vocabulaire,1990-04-26,1,"['01.020','01.040.01']",ISO/TC 37,9599,,"[32819,20057]","['en','fr']",17
• ISO 1088:19735592,IS,,ISO 1088:1973,Liquid flow measurement in open channels — Velocity-area methods — Collection of data for determination of errors in measurement,Mesure de débit des liquides
• ISO 1088:19855593,IS,,ISO 1088:1985,Liquid flow measurement in open channels — Velocity-area methods — Collection and processing of data for determination of errors in measurement,Mesure de déb
• ISO 1089:19805594,IS,,ISO 1089:1980,Electrode taper fits for spot welding equipment — Dimensions,Emmanchements coniques d'électrodes pour machines à souder par points — Dimensions,1980-03-01,1,
• ISO 1090:19815595,IS,,ISO 1090:1981,Office machines and data processing equipment — Function key symbols on typewriters,Machines de bureau et machines employées en traitement de l'information
• ISO 1091:19775596,IS,,ISO 1091:1977,Typewriters — Layout of printing and function keys,Machines à écrire — Disposition des touches d'impression et des touches de fonction,1977-08-01,1,['35.260'

← records 801–1,200 · All of Withdrawn and superseded ISO standards · records 1,601 on →