Records 18,401–18,800 — Withdrawn and superseded ISO standards

Records 18,401 to 18,800 of 24,640. Each links to its own page, which carries the source URL and the quoted line that states the value.

• ISO 23550:200436890,IS,,ISO 23550:2004,Safety and control devices for gas burners and gas-burning appliances — General requirements,Dispositifs de commande et de sécurité pour brûleurs à gaz et
• ISO 23550:201157045,IS,,ISO 23550:2011,Safety and control devices for gas burners and gas-burning appliances — General requirements,Dispositifs de commande et de sécurité pour brûleurs à gaz et
• ISO 23550:2011/Amd 1:201561951,IS,Amd,ISO 23550:2011/Amd 1:2015,Safety and control devices for gas burners and gas-burning appliances — General requirements — Amendment 1,Dispositifs de commande et de sécu
• ISO 23551-1:200636891,IS,,ISO 23551-1:2006,Safety and control devices for gas burners and gas-burning appliances — Particular requirements — Part 1: Automatic valves,Dispositifs de commande et de
• ISO 23551-1:201254346,IS,,ISO 23551-1:2012,Safety and control devices for gas burners and gas-burning appliances — Particular requirements — Part 1: Automatic and semi-automatic valves,Dispositifs
• ISO 23551-2:200641170,IS,,ISO 23551-2:2006,Safety and control devices for gas burners and gas-burning appliances — Particular requirements — Part 2: Pressure regulators,Dispositifs de commande et
• ISO 23551-4:200536931,IS,,ISO 23551-4:2005,Safety and control devices for gas burners and gas-burning appliances — Particular requirements — Part 4: Valve-proving systems for automatic shut-off va
• ISO 23551-4:2005/Amd 1:201051959,IS,Amd,ISO 23551-4:2005/Amd 1:2010,Safety and control devices for gas burners and gas-burning appliances — Particular requirements — Part 4: Valve-proving systems for automat
• ISO 23551-5:201460486,IS,,ISO 23551-5:2014,Safety and control devices for gas burners and gas-burning appliances — Particular requirements — Part 5: Manual gas valves,Dispositifs de commande et de
• ISO 23551-6:201460520,IS,,ISO 23551-6:2014,Safety and control devices for gas burners and gas-burning appliances — Particular requirements — Part 6: Thermoelectric flame supervision controls,Dispo
• ISO 23551-8:201662335,IS,,ISO 23551-8:2016,Safety and control devices for gas burners and gas-burning appliances — Particular requirements — Part 8: Multifunctional controls,Dispositifs de command
• ISO 23551-8:2016/Amd 1:201971282,IS,Amd,ISO 23551-8:2016/Amd 1:2019,Safety and control devices for gas burners and gas-burning appliances — Particular requirements — Part 8: Multifunctional controls — Amendm
• ISO 23551-9:201564957,IS,,ISO 23551-9:2015,Safety and control devices for gas burners and gas-burning appliances — Particular requirements — Part 9: Mechanical gas thermostats,Dispositifs de comma
• ISO 23551-10:201668556,IS,,ISO 23551-10:2016,Safety and control devices for gas burners and gas-burning appliances — Particular requirements — Part 10: Vent valves,Dispositifs de commande et de séc
• ISO 23552-1:200741153,IS,,ISO 23552-1:2007,"Safety and control devices for gas and/or oil burners and gas and/or oil appliances — Particular requirements — Part 1: Fuel/air ratio controls, electro
• ISO 23552-1:2007/Amd 1:201051633,IS,Amd,ISO 23552-1:2007/Amd 1:2010,"Safety and control devices for gas and/or oil burners and gas and/or oil appliances — Particular requirements — Part 1: Fuel/air ratio con
• ISO 23553-1:200736893,IS,,ISO 23553-1:2007,Safety and control devices for oil burners and oil-burning appliances — Particular requirements — Part 1: Shut-off devices for oil burners,Dispositifs de
• ISO 23553-1:2007/Cor 1:200953552,IS,Cor,ISO 23553-1:2007/Cor 1:2009,Safety and control devices for oil burners and oil-burning appliances — Particular requirements — Part 1: Shut-off devices for oil burners
• ISO 23553-1:201457050,IS,,ISO 23553-1:2014,Safety and control devices for oil burners and oil-burning appliances — Particular requirements — Part 1: Automatic and semi-automatic valves,Dispositifs
• ISO 23559:200741659,IS,,ISO 23559:2007,Plastics — Film and sheeting — Guidance on the testing of thermoplastic films,Plastiques — Film et feuille — Lignes directrices pour les essais de films th
• ISO 23560:200841660,IS,,ISO 23560:2008,Woven polypropylene sacks for bulk packaging of foodstuffs,Sacs tissés en polypropylène pour l'emballage en vrac de denrées alimentaires,2008-09-17,1,"['83
• ISO 23570-3:200639928,IS,,ISO 23570-3:2006,Industrial automation systems and integration — Distributed installation in industrial applications — Part 3: Power distribution bus,Systèmes d'automatis
• ISO 23581:202076107,IS,,ISO 23581:2020,Petroleum products and related products — Determination of kinematic viscosity — Method by Stabinger type viscometer,Produits pétroliers et produits connex
• ISO 23599:201255867,IS,,ISO 23599:2012,Assistive products for blind and vision-impaired persons — Tactile walking surface indicators,Produits d'assistance pour personnes aveugles ou visuellement
• ISO 23601:200941685,IS,,ISO 23601:2009,Safety identification — Escape and evacuation plan signs,Identification de sécurité — Plans d'évacuation et de secours,2009-02-09,1,['01.080.10'],ISO/TC 14
• ISO 23603:200541694,IS,,ISO 23603:2005,Standard method of assessing the spectral quality of daylight simulators for visual appraisal and measurement of colour,Méthode normalisée d'évaluation de
• ISO 23611-1:200636914,IS,,ISO 23611-1:2006,Soil quality — Sampling of soil invertebrates — Part 1: Hand-sorting and formalin extraction of earthworms,Qualité du sol — Prélèvement des invertébrés d
• ISO 23611-1:201870449,IS,,ISO 23611-1:2018,Soil quality — Sampling of soil invertebrates — Part 1: Hand-sorting and extraction of earthworms,Qualité du sol — Prélèvement des invertébrés du sol — P
• ISO 23611-2:200637027,IS,,ISO 23611-2:2006,Soil quality — Sampling of soil invertebrates — Part 2: Sampling and extraction of micro-arthropods (Collembola and Acarina),Qualité du sol — Prélèvement
• ISO 23611-3:200739246,IS,,ISO 23611-3:2007,Soil quality — Sampling of soil invertebrates — Part 3: Sampling and soil extraction of enchytraeids,Qualité du sol — Prélèvement des invertébrés du sol
• ISO 23611-4:200741868,IS,,ISO 23611-4:2007,"Soil quality — Sampling of soil invertebrates — Part 4: Sampling, extraction and identification of soil-inhabiting nematodes","Qualité du sol — Prélèvem
• ISO 23611-5:201150777,IS,,ISO 23611-5:2011,Soil quality — Sampling of soil invertebrates — Part 5: Sampling and extraction of soil macro-invertebrates,Qualité du sol — Prélèvement des invertébrés
• ISO 23611-6:201250778,IS,,ISO 23611-6:2012,Soil quality — Sampling of soil invertebrates — Part 6: Guidance for the design of sampling programmes with soil invertebrates,Qualité du sol — Prélèveme
• ISO 23616:202276407,IS,,ISO 23616:2022,"Cleaning, inspection and repair of firefighters' personal protective equipment (PPE)","Nettoyage, inspection et réparation des équipements de protection i
• ISO 23665:202176592,IS,,ISO 23665:2021,Unmanned aircraft systems — Training for personnel involved in UAS operations,Aéronefs sans pilote — Formation du personnel impliqué dans l'exploitation d'
• ISO 23665:202383175,IS,,ISO 23665:2023,Unmanned aircraft systems — Training for personnel involved in UAS operations,Aéronefs sans pilote — Formation du personnel impliqué dans l'exploitation d'
• ISO 23667:200741792,IS,,ISO 23667:2007,Packaging — Transport packaging for dangerous goods — Rigid plastics and plastics composite IBCs — Compatibility testing,Emballages — Emballages de transpo
• ISO 23671:200636923,IS,,ISO 23671:2006,Passenger car tyres — Method for measuring relative wet grip performance — Loaded new tyres,Pneumatiques pour voitures particulières — Méthode de mesure de
• ISO 23671:201565530,IS,,ISO 23671:2015,Passenger car tyres — Method for measuring relative wet grip performance — Loaded new tyres,Pneumatiques pour voitures particulières — Méthode de mesure de
• ISO 23702-1:201873540,IS,,ISO 23702-1:2018,Leather — Organic fluorine — Part 1: Determination of the non-volatile compound content by extraction method using liquid chromatography/tandem mass spec
• ISO 23711:200336940,IS,,ISO 23711:2003,Elastomeric seals — Requirements for materials for pipe joint seals used in water and drainage applications — Thermoplastic elastomers,Garnitures d'étanché
• ISO 23714:200736944,IS,,ISO 23714:2007,Pulps — Determination of water retention value (WRV),Pâtes — Détermination de la valeur de rétention d'eau (VRE),2007-02-02,1,['85.040'],ISO/TC 6,9599,,[60
• ISO 23717:200636947,IS,,ISO 23717:2006,Steel wire and wire products — Hose reinforcement wire,Fils et produits tréfilés en acier — Fil d'armature pour flexibles,2006-04-20,1,['77.140.65'],ISO/TC
• ISO 23747:200741834,IS,,ISO 23747:2007,Anaesthetic and respiratory equipment — Peak expiratory flow meters for the assessment of pulmonary function in spontaneously breathing humans,Matériel d'a
• ISO 23753-1:200537975,IS,,ISO 23753-1:2005,Soil quality — Determination of dehydrogenase activity in soils — Part 1: Method using triphenyltetrazolium chloride (TTC),Qualité du sol — Détermination
• ISO 23753-2:200537976,IS,,ISO 23753-2:2005,Soil quality — Determination of dehydrogenase activity in soils — Part 2: Method using iodotetrazolium chloride (INT),Qualité du sol — Détermination de l
• ISO 23794:200336983,IS,,ISO 23794:2003,"Rubber, vulcanized or thermoplastic — Abrasion testing — Guidance","Caoutchouc, vulcanisé ou thermoplastique — Essais d'abrasion — Guide",2003-12-01,1,['8
• ISO 23794:201052169,IS,,ISO 23794:2010,"Rubber, vulcanized or thermoplastic — Abrasion testing — Guidance",Caoutchouc vulcanisé ou thermoplastique — Essais d'abrasion — Lignes directrices,2010-0
• ISO 23794:201563763,IS,,ISO 23794:2015,"Rubber, vulcanized or thermoplastic — Abrasion testing — Guidance",Caoutchouc vulcanisé ou thermoplastique — Essais d'abrasion — Lignes directrices,2015-0
• ISO 23811:200941866,IS,,ISO 23811:2009,"Paints and varnishes — Determination of percentage volume of non-volatile matter by measuring the non-volatile matter content and the density of the coati
• ISO 23814:200936991,IS,,ISO 23814:2009,Cranes — Competency requirements for crane inspectors,Appareils de levage à charge suspendue — Exigences relatives aux compétences pour les inspecteurs d'a
• ISO 23828:200850705,IS,,ISO 23828:2008,Fuel cell road vehicles - Energy consumption measurement — Vehicles fuelled with compressed hydrogen,Véhicules routiers avec pile à combustible — Mesurage
• ISO 23828:201361031,IS,,ISO 23828:2013,Fuel cell road vehicles — Energy consumption measurement — Vehicles fuelled with compressed hydrogen,Véhicules routiers avec pile à combustible — Mesurage
• ISO 23833:200636995,IS,,ISO 23833:2006,Microbeam analysis — Electron probe microanalysis (EPMA) — Vocabulary,Analyse par microfaisceaux — Analyse par microsonde électronique (microsonde de Casta
• ISO 23853:200437002,IS,,ISO 23853:2004,Cranes — Training of slingers and signallers,Appareils de levage à charge suspendue — Formation des élingueurs et des signaleurs,2004-11-17,1,"['03.100.30'
• ISO 23853:201875171,IS,,ISO 23853:2018,Cranes — Training of slingers and signallers,Appareils de levage à charge suspendue — Formation des élingueurs et des signaleurs,2018-06-22,2,"['03.100.30'
• ISO 23873:201056194,IS,,ISO 23873:2010,Hard coal — Method for the measurement of the swelling of hard coal using a dilatometer,Houille — Méthode pour le mesurage du gonflement de la houille au m
• ISO 23907:201252896,IS,,ISO 23907:2012,Sharps injury protection — Requirements and test methods — Sharps containers,"Protection contre les blessures par perforants — Exigences et méthodes d'essa
• ISO 23908:201150680,IS,,ISO 23908:2011,"Sharps injury protection — Requirements and test methods — Sharps protection features for single-use hypodermic needles, introducers for catheters and nee
• ISO 23910:200741922,IS,,ISO 23910:2007,Leather — Physical and mechanical tests — Measurement of stitch tear resistance,Cuir — Essais physiques et mécaniques — Mesurage de la résistance à l'arrac
• ISO 23910:201767099,IS,,ISO 23910:2017,Leather — Physical and mechanical tests — Measurement of stitch tear resistance,Cuir — Essais physiques et mécaniques — Mesurage de la résistance à l'arrac
• ISO 23913:200637017,IS,,ISO 23913:2006,Water quality — Determination of chromium(VI) — Method using flow analysis (FIA and CFA) and spectrometric detection,Qualité de l'eau — Dosage du chrome(VI
• ISO 23932:200941932,IS,,ISO 23932:2009,Fire safety engineering — General principles,Ingénierie de la sécurité incendie — Principes généraux,2009-06-12,1,['13.220.01'],ISO/TC 92/SC 4,9599,,[63933
• ISO 23936-1:200941947,IS,,ISO 23936-1:2009,"Petroleum, petrochemical and natural gas industries — Non-metallic materials in contact with media related to oil and gas production — Part 1: Thermopla
• ISO 23953-1:200537028,IS,,ISO 23953-1:2005,Refrigerated display cabinets — Part 1: Vocabulary,Meubles frigorifiques de vente — Partie 1: Vocabulaire,2005-10-17,1,"['97.130.20','01.040.97']",ISO/TC
• ISO 23953-1:2005/Amd 1:201254087,IS,Amd,ISO 23953-1:2005/Amd 1:2012,Refrigerated display cabinets — Part 1: Vocabulary — Amendment 1,Meubles frigorifiques de vente — Partie 1: Vocabulaire — Amendement 1,2012
• ISO 23953-1:201562001,IS,,ISO 23953-1:2015,Refrigerated display cabinets — Part 1: Vocabulary,Meubles frigorifiques de vente — Partie 1: Vocabulaire,2015-10-15,2,"['97.130.20','01.040.97']",ISO/TC
• ISO 23953-2:200537029,IS,,ISO 23953-2:2005,"Refrigerated display cabinets — Part 2: Classification, requirements and test conditions","Meubles frigorifiques de vente — Partie 2: Classification, ex
• ISO 23953-2:2005/Amd 1:201254088,IS,Amd,ISO 23953-2:2005/Amd 1:2012,"Refrigerated display cabinets — Part 2: Classification, requirements and test conditions — Amendment 1","Meubles frigorifiques de vente —
• ISO 23953-2:201562002,IS,,ISO 23953-2:2015,"Refrigerated display cabinets — Part 2: Classification, requirements and test conditions","Meubles frigorifiques de vente — Partie 2: Classification, ex
• ISO 23999:200841981,IS,,ISO 23999:2008,Resilient floor coverings — Determination of dimensional stability and curling after exposure to heat,Revêtements de sol résilients — Détermination de la s
• ISO 23999:201868826,IS,,ISO 23999:2018,Resilient floor coverings — Determination of dimensional stability and curling after exposure to heat,Revêtements de sol résilients — Détermination de la s
• ISO 23999:202178154,IS,,ISO 23999:2021,Resilient floor coverings — Determination of dimensional stability and curling after exposure to heat,Revêtements de sol résilients — Détermination de la s
• ISO 24013:200637045,IS,,ISO 24013:2006,Optics and photonics — Lasers and laser-related equipment — Measurement of phase retardation of optical components for polarized laser radiation,Optique et
• ISO 24014-1:200741985,IS,,ISO 24014-1:2007,Public transport — Interoperable fare management system — Part 1: Architecture,Transport public — Système de gestion tarifaire interopérable — Partie 1:
• ISO 24014-1:201561545,IS,,ISO 24014-1:2015,Public transport — Interoperable fare management system — Part 1: Architecture,Transport public — Système de gestion tarifaire interopérable — Partie 1:
• ISO 24033:200637060,IS,,ISO 24033:2006,Pipes made of raised-temperature-resistance polyethylene (PE-RT) — Effect of time and temperature on the expected strength,Tubes en polyéthylène de meilleu
• ISO 24033:200945496,IS,,ISO 24033:2009,Polyethylene of raised temperature resistance (PE-RT) pipes — Effect of time and temperature on the expected strength,Tubes en polyéthylène de meilleure ré
• ISO 24034:200537061,IS,,ISO 24034:2005,Welding consumables — Solid wires and rods for fusion welding of titanium and titanium alloys — Classification,Produits consommables pour le soudage — Fils
• ISO 24034:2005/Amd 1:200844990,IS,Amd,ISO 24034:2005/Amd 1:2008,Welding consumables — Solid wires and rods for fusion welding of titanium and titanium alloys — Classification — Amendment 1: .,Produits con
• ISO 24034:201053802,IS,,ISO 24034:2010,"Welding consumables — Solid wire electrodes, solid wires and rods for fusion welding of titanium and titanium alloys — Classification","Produits consommab
• ISO 24046:202277630,IS,,ISO 24046:2022,"Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods of tests for reinforcements — Determination of the tensile properties of resin-im
• ISO 24095:200942006,IS,,ISO 24095:2009,Workplace air — Guidance for the measurement of respirable crystalline silica,Air des lieux de travail — Lignes directrices pour le mesurage de la fraction
• ISO 24097-1:200942014,IS,,ISO 24097-1:2009,Intelligent transport systems — Using web services (machine-machine delivery) for ITS service delivery — Part 1: Realization of interoperable web service
• ISO 24102-1:201361561,IS,,ISO 24102-1:2013,Intelligent transport systems — Communications access for land mobiles (CALM) — ITS station management — Part 1: Local management,Systèmes intelligents d
• ISO 24102-1:2013/Amd 1:201765604,IS,Amd,ISO 24102-1:2013/Amd 1:2017,Intelligent transport systems — Communications access for land mobiles (CALM) — ITS station management — Part 1: Local management — Amendme
• ISO 24102-2:201561563,IS,,ISO 24102-2:2015,Intelligent transport systems — Communications access for land mobiles (CALM) — ITS station management — Part 2: Remote management of ITS-SCUs,Systèmes i
• ISO 24102-3:201361564,IS,,ISO 24102-3:2013,Intelligent transport systems — Communications access for land mobiles (CALM) — ITS station management — Part 3: Service access points,Systèmes intellige
• ISO 24102-3:2013/Amd 1:201765605,IS,Amd,ISO 24102-3:2013/Amd 1:2017,Intelligent transport systems — Communications access for land mobiles (CALM) — ITS station management — Part 3: Service access points — Am
• ISO 24102-4:201361565,IS,,ISO 24102-4:2013,Intelligent transport systems — Communications access for land mobiles (CALM) — ITS station management — Part 4: Station-internal management communicatio
• ISO 24102-4:2013/Amd 1:201765606,IS,Amd,ISO 24102-4:2013/Amd 1:2017,Intelligent transport systems — Communications access for land mobiles (CALM) — ITS station management — Part 4: Station-internal managemen
• ISO 24102-5:201361566,IS,,ISO 24102-5:2013,Intelligent transport systems — Communications access for land mobiles (CALM) — ITS station management — Part 5: Fast service advertisement protocol (FSA
• ISO 24102-5:2013/Amd 1:201765607,IS,Amd,ISO 24102-5:2013/Amd 1:2017,Intelligent transport systems — Communications access for land mobiles (CALM) — ITS station management — Part 5: Fast service advertisement
• ISO 24102:201042019,IS,,ISO 24102:2010,Intelligent transport systems — Communications access for land mobiles (CALM) — Management,Systèmes intelligents de transport — Accès aux communications de
• ISO 24113:201042034,IS,,ISO 24113:2010,Space systems — Space debris mitigation requirements,Systèmes spatiaux — Exigences de mitigation des débris spatiaux,2010-06-18,1,['49.140'],ISO/TC 20/SC 1
• ISO 24113:201157239,IS,,ISO 24113:2011,Space systems — Space debris mitigation requirements,Systèmes spatiaux — Exigences de mitigation des débris spatiaux,2011-05-11,2,['49.140'],ISO/TC 20/SC 1
• ISO 24113:201972383,IS,,ISO 24113:2019,Space systems — Space debris mitigation requirements,Systèmes spatiaux — Exigences de mitigation des débris spatiaux,2019-07-11,3,['49.140'],ISO/TC 20/SC 1
• ISO 24165-1:202180601,IS,,ISO 24165-1:2021,"Digital token identifier (DTI) — Registration, assignment and structure — Part 1: Method for registration and assignment","Jeton digital — Enregistremen
• ISO 24165-2:202180602,IS,,ISO 24165-2:2021,"Digital token identifier (DTI) — Registration, assignment and structure — Part 2: Data elements for registration","Jeton digital — Enregistrement, affec
• ISO 24173:200942052,IS,,ISO 24173:2009,Microbeam analysis — Guidelines for orientation measurement using electron backscatter diffraction,Analyse par microfaisceaux — Lignes directrices pour la
• ISO 24194:202278074,IS,,ISO 24194:2022,Solar energy — Collector fields — Check of performance,Energie solaire — Champs de capteurs — Vérification de la performance,2022-05-31,1,['27.160'],ISO/TC
• ISO 24194:2022/Amd 1:202486190,IS,Amd,ISO 24194:2022/Amd 1:2024,Solar energy — Collector fields — Check of performance — Amendment 1,Energie solaire — Champs de capteurs — Vérification de la performance —
• ISO 24213:200842108,IS,,ISO 24213:2008,Metallic materials — Sheet and strip — Method for springback evaluation in stretch bending,Matériaux métalliques — Tôles et bandes — Méthode d'évaluation d
• ISO 24234:200437112,IS,,ISO 24234:2004,Dentistry — Mercury and alloys for dental amalgam,Art dentaire — Mercure et alliages pour amalgame dentaire,2004-10-01,1,['11.060.10'],ISO/TC 106/SC 1,9599
• ISO 24234:2004/Amd 1:201145647,IS,Amd,ISO 24234:2004/Amd 1:2011,Dentistry — Mercury and alloys for dental amalgam — Amendment 1: Requirements for marking and manufacturer's instructions concerning mercury,
• ISO 24234:201559756,IS,,ISO 24234:2015,Dentistry — Dental amalgam,Médecine bucco-dentaire — Amalgame dentaire,2015-04-28,2,['11.060.10'],ISO/TC 106/SC 1,9599,"[45647,37112]",[77495],"['en','fr'
• ISO 24294:201352502,IS,,ISO 24294:2013,Timber — Round and sawn timber — Vocabulary,Bois — Bois ronds et bois sciés — Vocabulaire,2013-09-03,1,"['79.040','01.040.79']",ISO/TC 218,9599,"[10371,103
• ISO 24314:200637127,IS,,ISO 24314:2006,Structural steels — Structural steels for building with improved seismic resistance — Technical delivery conditions,Aciers de construction — Aciers de cons
• ISO 24334:200640778,IS,,ISO 24334:2006,Laminate floor coverings — Determination of locking strength for mechanically assembled panels,Revêtements de sol stratifiés — Détermination de la résistan
• ISO 24334:201465426,IS,,ISO 24334:2014,Laminate floor coverings — Determination of locking strength for mechanically assembled panels,Revêtements de sol stratifiés — Détermination de la résistan
• ISO 24335:200637130,IS,,ISO 24335:2006,Laminate floor coverings — Determination of impact resistance,Revêtements de sol stratifiés — Détermination de la résistance aux chocs,2006-03-03,1,['97.15
• ISO 24337:200637132,IS,,ISO 24337:2006,Laminate floor coverings — Determination of geometrical characteristics,Revêtements de sol stratifiés — Détermination des caractéristiques géométriques,200
• ISO 24338:200637133,IS,,ISO 24338:2006,Laminate floor coverings — Determination of abrasion resistance,Revêtements de sol stratifiés — Détermination de la résistance à l'abrasion,2006-03-23,1,['
• ISO 24338:201461320,IS,,ISO 24338:2014,Laminate floor coverings — Determination of abrasion resistance,Revêtements de sol stratifiés — Détermination de la résistance à l'abrasion,2014-12-09,2,['
• ISO 24342:200640590,IS,,ISO 24342:2006,"Resilient floor-covering tiles — Determination of side length, edge straightness and squareness","Dalles pour revêtements de sol résilients — Déterminatio
• ISO 24342:200745774,IS,,ISO 24342:2007,"Resilient and textile floor-coverings — Determination of side length, edge straightness and squareness of tiles","Revêtements de sol résilients ou textile
• ISO 24342:2007/Amd 1:201261667,IS,Amd,ISO 24342:2007/Amd 1:2012,"Resilient and textile floor-coverings — Determination of side length, edge straightness and squareness of tiles — Amendment 1","Revêtements
• ISO 24342:201868827,IS,,ISO 24342:2018,"Resilient and textile floor-coverings — Determination of side length, edge straightness and squareness of tiles","Revêtements de sol résilients ou textile
• ISO 24343-2:201151057,IS,,ISO 24343-2:2011,Resilient and laminate floor coverings — Determination of indentation and residual indentation — Part 2: Short-term residual indentation of resilient flo
• ISO 24343-3:201151058,IS,,ISO 24343-3:2011,Resilient and laminate floor coverings — Determination of indentation and residual indentation — Part 3: Indentation of resilient semi-flexible/vinyl com
• ISO 24347:200536734,IS,,ISO 24347:2005,Agricultural vehicles — Mechanical connections between towed and towing vehicles — Dimensions of ball-type coupling device (80 mm),Véhicules agricoles — Li
• ISO 24362-1:201461494,IS,,ISO 24362-1:2014,Textiles — Methods for determination of certain aromatic amines derived from azo colorants — Part 1: Detection of the use of certain azo colorants access
• ISO 24362-3:201462441,IS,,ISO 24362-3:2014,"Textiles — Methods for determination of certain aromatic amines derived from azo colorants — Part 3: Detection of the use of certain azo colorants, whic
• ISO 24373:200842177,IS,,ISO 24373:2008,Welding consumables — Solid wires and rods for fusion welding of copper and copper alloys — Classification,Produits consommables pour le soudage — Fils ple
• ISO 24394:200842197,IS,,ISO 24394:2008,Welding for aerospace applications — Qualification test for welders and welding operators — Fusion welding of metallic components,Soudage pour applications
• ISO 24394:2008/Amd 1:201260507,IS,Amd,ISO 24394:2008/Amd 1:2012,Welding for aerospace applications — Qualification test for welders and welding operators — Fusion welding of metallic components — Amendment
• ISO 24394:201870092,IS,,ISO 24394:2018,Welding for aerospace applications — Qualification test for welders and welding operators — Fusion welding of metallic components,Soudage pour applications
• ISO 24409-1:201050240,IS,,ISO 24409-1:2010,"Ships and marine technology — Design, location and use of shipboard safety signs, safety-related signs, safety notices and safety markings — Part 1: Des
• ISO 24410:200537202,IS,,ISO 24410:2005,Earth-moving machinery — Coupling of attachments to skid steer loaders,Engins de terrassement — Attelage des accessoires des chargeuses à direction articul
• ISO 24431:200637208,IS,,ISO 24431:2006,Gas cylinders — Cylinders for compressed and liquefied gases (excluding acetylene) — Inspection at time of filling,Bouteilles à gaz — Bouteilles à gaz comp
• ISO 24442:201146521,IS,,ISO 24442:2011,Cosmetics — Sun protection test methods — In vivo determination of sunscreen UVA protection,Cosmétique — Méthodes d'évaluation de la protection solaire — D
• ISO 24443:201246522,IS,,ISO 24443:2012,Determination of sunscreen UVA photoprotection in vitro,Détermination in vitro de la photoprotection UVA,2012-05-30,1,['71.100.70'],ISO/TC 217,9599,,[75059
• ISO 24444:201046523,IS,,ISO 24444:2010,Cosmetics — Sun protection test methods — In vivo determination of the sun protection factor (SPF),Cosmétiques — Méthodes d'essai de protection solaire — D
• ISO 24477:202278872,IS,,ISO 24477:2022,"Vacuum technology — Vacuum gauges — Specifications, calibration and measurement uncertainties for spinning rotor gauges","Technique du vide — Manomètres à
• ISO 24487-1:202178892,IS,,ISO 24487-1:2021,Graphic technology — Processless lithographic plates — Part 1: Evaluation methods for characteristics and performance,Technologie graphique — Plaques lit
• ISO 24490:200537235,IS,,ISO 24490:2005,Cryogenic vessels — Pumps for cryogenic service,Récipients cryogéniques — Pompes pour service cryogénique,2005-04-20,1,['23.020.40'],ISO/TC 220,9599,,[6466
• ISO 24490:201664666,IS,,ISO 24490:2016,Cryogenic vessels — Pumps for cryogenic service,Récipients cryogéniques — Pompes pour service cryogénique,2016-03-15,2,['23.020.40'],ISO/TC 220,9599,[37235
• ISO 24496:201766835,IS,,ISO 24496:2017,Office furniture — Office chairs — Methods for the determination of dimensions,Mobilier de bureau — Sièges de travail pour bureau — Méthodes pour détermine
• ISO 24497-1:200742265,IS,,ISO 24497-1:2007,Non-destructive testing — Metal magnetic memory — Part 1: Vocabulary,Essais non destructifs — Mémoire magnétique des métaux — Partie 1: Vocabulaire,2007-
• ISO 24497-2:200742264,IS,,ISO 24497-2:2007,Non-destructive testing — Metal magnetic memory — Part 2: General requirements,Essais non destructifs — Mémoire magnétique des métaux — Partie 2: Exigenc
• ISO 24497-3:200742266,IS,,ISO 24497-3:2007,Non-destructive testing — Metal magnetic memory — Part 3: Inspection of welded joints,Essais non destructifs — Mémoire magnétique des métaux — Partie 3:
• ISO 24505:201663752,IS,,ISO 24505:2016,Ergonomics — Accessible design — Method for creating colour combinations taking account of age-related changes in human colour vision,Ergonomie — Conceptio
• ISO 24510:200737246,IS,,ISO 24510:2007,Activities relating to drinking water and wastewater services — Guidelines for the assessment and for the improvement of the service to users,Activités rel
• ISO 24511:200737247,IS,,ISO 24511:2007,Activities relating to drinking water and wastewater services — Guidelines for the management of wastewater utilities and for the assessment of wastewater
• ISO 24512:200737248,IS,,ISO 24512:2007,Activities relating to drinking water and wastewater services — Guidelines for the management of drinking water utilities and for the assessment of drinkin
• ISO 24521:201664679,IS,,ISO 24521:2016,Activities relating to drinking water and wastewater services — Guidelines for the management of basic on-site domestic wastewater services,Activités relat
• ISO 24531:200737503,IS,,ISO 24531:2007,"Intelligent transport systems — System architecture, taxonomy and terminology — Using XML in ITS standards, data registries and data dictionaries","Systèm
• ISO 24534-3:201051851,IS,,ISO 24534-3:2010,Automatic vehicle and equipment identification — Electronic registration identification (ERI) for vehicles — Part 3: Vehicle data,Identification automati
• ISO 24557:200942281,IS,,ISO 24557:2009,Pulses — Determination of moisture content — Air-oven method,Légumineuses — Détermination de la teneur en eau — Méthode par séchage à l'étuve,2009-09-24,1,
• ISO 24598:200742326,IS,,ISO 24598:2007,"Welding consumables — Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of creep-resisting steels
• ISO 24598:201257187,IS,,ISO 24598:2012,"Welding consumables — Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of creep-resisting steels
• ISO 24611:201251934,IS,,ISO 24611:2012,Language resource management — Morpho-syntactic annotation framework (MAF),Gestion des ressources langagières — Cadre d'annotation morphosyntaxique (MAF),2
• ISO 24613-1:201968516,IS,,ISO 24613-1:2019,Language resource management — Lexical markup framework (LMF) — Part 1: Core model,Gestion des ressources linguistiques — Cadre de balisage lexical (LMF)
• ISO 24613:200837327,IS,,ISO 24613:2008,Language resource management - Lexical markup framework (LMF),Gestion de ressources langagières — Cadre de balisage lexical,2008-11-17,1,['01.020'],ISO/TC
• ISO 24615:201037329,IS,,ISO 24615:2010,Language resource management — Syntactic annotation framework (SynAF),Gestion de ressources langagières — Cadre d'annotation syntaxique (SynAF),2010-10-19,
• ISO 24617-2:201251967,IS,,ISO 24617-2:2012,Language resource management — Semantic annotation framework (SemAF) — Part 2: Dialogue acts,Gestion des ressources langagières — Cadre d'annotation séma
• ISO 24617-7:201460779,IS,,ISO 24617-7:2014,Language resource management — Semantic annotation framework — Part 7: Spatial information (ISOspace),Gestion des ressources linguistiques — Cadre d'anno
• ISO 24631-1:200942336,IS,,ISO 24631-1:2009,Radiofrequency identification of animals — Part 1: Evaluation of conformance of RFID transponders with ISO 11784 and ISO 11785 (including granting and us
• ISO 24631-1:201763394,IS,,ISO 24631-1:2017,Radiofrequency identification of animals — Part 1: Evaluation of conformance of RFID transponders with ISO 11784 and ISO 11785 (including granting and us
• ISO 24631-2:200942337,IS,,ISO 24631-2:2009,Radiofrequency identification of animals — Part 2: Evaluation of conformance of RFID transceivers with ISO 11784 and ISO 11785,Identification des animaux
• ISO 24631-3:200942338,IS,,ISO 24631-3:2009,Radiofrequency identification of animals — Part 3: Evaluation of performance of RFID transponders conforming with ISO 11784 and ISO 11785,Identification
• ISO 24631-3:201763396,IS,,ISO 24631-3:2017,Radiofrequency identification of animals — Part 3: Evaluation of performance of RFID transponders conforming with ISO 11784 and ISO 11785,Identification
• ISO 24631-4:200942339,IS,,ISO 24631-4:2009,Radiofrequency identification of animals — Part 4: Evaluation of performance of RFID transceivers conforming with ISO 11784 and ISO 11785,Identification
• ISO 24638:200842345,IS,,ISO 24638:2008,Space systems — Pressure components and pressure system integration,Systèmes spatiaux — Intégration des composants sous pression et des systèmes sous press
• ISO 24678-6:201642356,IS,,ISO 24678-6:2016,Fire safety engineering — Requirements governing algebraic formulae — Part 6: Flashover related phenomena,Ingénierie de la sécurité incendie — Exigences
• ISO 24698-1:200842437,IS,,ISO 24698-1:2008,"Rubber, raw — Determination of bound acrylonitrile content in acrylonitrile-butadiene rubber (NBR) — Part 1: Combustion (Dumas) method",Caoutchouc brut
• ISO 24698-2:200842438,IS,,ISO 24698-2:2008,"Rubber, raw — Determination of bound acrylonitrile content in acrylonitrile-butadiene rubber (NBR) — Part 2: Kjeldahl method",Caoutchouc brut — Détermin
• ISO 24801-1:200742444,IS,,ISO 24801-1:2007,Recreational diving services — Safety related minimum requirements for the training of recreational scuba divers — Part 1: Level 1 — Supervised diver,Ser
• ISO 24801-2:200742448,IS,,ISO 24801-2:2007,Recreational diving services — Safety related minimum requirements for the training of recreational scuba divers — Part 2: Level 2 — Autonomous diver,Ser
• ISO 24801-3:200742449,IS,,ISO 24801-3:2007,Recreational diving services — Safety related minimum requirements for the training of recreational scuba divers — Part 3: Level 3 — Dive leader,Services
• ISO 24802-1:200742445,IS,,ISO 24802-1:2007,Recreational diving services — Safety related minimum requirements for the training of scuba instructors — Part 1: Level 1,Services relatifs à la plongée
• ISO 24802-2:200742447,IS,,ISO 24802-2:2007,Recreational diving services — Safety related minimum requirements for the training of scuba instructors — Part 2: Level 2,Services relatifs à la plongée
• ISO 24803:200742446,IS,,ISO 24803:2007,Recreational diving services — Requirements for recreational scuba diving service providers,Services relatifs à la plongée de loisirs — Exigences relatives
• ISO 24817:201559987,IS,,ISO 24817:2015,"Petroleum, petrochemical and natural gas industries — Composite repairs for pipework — Qualification and design, installation, testing and inspection","I
• ISO 24917:201042633,IS,,ISO 24917:2010,Space systems — General test requirements for launch vehicles,Systèmes spatiaux — Exigences générales d'essai pour véhicules lanceurs,2010-09-30,1,['49.140
• ISO 25110:201772360,IS,,ISO 25110:2017,Electronic fee collection — Interface definition for on-board account using integrated circuit card (ICC),Perception du télépéage — Définition d'interface
• ISO 25119-1:201045047,IS,,ISO 25119-1:2010,Tractors and machinery for agriculture and forestry — Safety-related parts of control systems — Part 1: General principles for design and development,Tra
• ISO 25119-2:201045048,IS,,ISO 25119-2:2010,Tractors and machinery for agriculture and forestry — Safety-related parts of control systems — Part 2: Concept phase,Tracteurs et matériels agricoles et
• ISO 25119-2:201869026,IS,,ISO 25119-2:2018,Tractors and machinery for agriculture and forestry — Safety-related parts of control systems — Part 2: Concept phase,Tracteurs et matériels agricoles et
• ISO 25119-3:201045049,IS,,ISO 25119-3:2010,"Tractors and machinery for agriculture and forestry — Safety-related parts of control systems — Part 3: Series development, hardware and software","Trac
• ISO 25119-4:201045050,IS,,ISO 25119-4:2010,"Tractors and machinery for agriculture and forestry — Safety-related parts of control systems — Part 4: Production, operation, modification and supporti
• ISO 25137-1:200942772,IS,,ISO 25137-1:2009,Plastics — Sulfone polymer moulding and extrusion materials — Part 1: Designation system and basis for specifications,Plastiques — Matériaux pour moulage
• ISO 25137-2:200942773,IS,,ISO 25137-2:2009,Plastics — Sulfone polymer moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties,Plastiques — Matériau
• ISO 25177:200842783,IS,,ISO 25177:2008,Soil quality — Field soil description,Qualité du sol — Description du sol sur le terrain,2008-11-12,1,['13.080.01'],ISO/TC 190,9599,[19237],[69585],"['en',
• ISO 25178-2:201242785,IS,,ISO 25178-2:2012,"Geometrical product specifications (GPS) — Surface texture: Areal — Part 2: Terms, definitions and surface texture parameters","Spécification géométriqu
• ISO 25178-71:201256784,IS,,ISO 25178-71:2012,Geometrical product specifications (GPS) — Surface texture: Areal — Part 71: Software measurement standards,Spécification géométrique des produits (GPS)
• ISO 25178-71:201765558,IS,,ISO 25178-71:2017,Geometrical product specifications (GPS) — Surface texture: Areal — Part 71: Software measurement standards,Spécification géométrique des produits (GPS)
• ISO 25178-601:201042786,IS,,ISO 25178-601:2010,Geometrical product specifications (GPS) — Surface texture: Areal — Part 601: Nominal characteristics of contact (stylus) instruments,Spécification géo
• ISO 25178-602:201043920,IS,,ISO 25178-602:2010,Geometrical product specifications (GPS) — Surface texture: Areal — Part 602: Nominal characteristics of non-contact (confocal chromatic probe) instrum
• ISO 25178-603:201361236,IS,,ISO 25178-603:2013,Geometrical product specifications (GPS) — Surface texture: Areal — Part 603: Nominal characteristics of non-contact (phase-shifting interferometric mi
• ISO 25178-604:201351381,IS,,ISO 25178-604:2013,Geometrical product specifications (GPS) — Surface texture: Areal — Part 604: Nominal characteristics of non-contact (coherence scanning interferometry
• ISO 25178-605:201453975,IS,,ISO 25178-605:2014,Geometrical product specifications (GPS) — Surface texture: Areal — Part 605: Nominal characteristics of non-contact (point autofocus probe) instrument
• ISO 25178-606:201559716,IS,,ISO 25178-606:2015,Geometrical product specification (GPS) — Surface texture: Areal — Part 606: Nominal characteristics of non-contact (focus variation) instruments,Spéci
• ISO 25179:201042787,IS,,ISO 25179:2010,Adhesives — Determination of the solubility of water-soluble or alkali-soluble pressure-sensitive adhesives,"Adhésifs — Détermination de la solubilité des
• ISO 25197:201242796,IS,,ISO 25197:2012,"Small craft — Electrical/electronic control systems for steering, shift and throttle","Petits navires — Systèmes électriques/électroniques pour le contrôl
• ISO 25197:2012/Amd 1:201464509,IS,Amd,ISO 25197:2012/Amd 1:2014,"Small craft — Electrical/electronic control systems for steering, shift and throttle — Amendment 1","Petits navires — Systèmes électriques/é
• ISO 25239-1:201144056,IS,,ISO 25239-1:2011,Friction stir welding — Aluminium — Part 1: Vocabulary,Soudage par friction-malaxage — Aluminium — Partie 1: Vocabulaire,2011-12-16,1,"['25.160.10','01.0
• ISO 25239-2:201144057,IS,,ISO 25239-2:2011,Friction stir welding — Aluminium — Part 2: Design of weld joints,Soudage par friction-malaxage — Aluminium — Partie 2: Conception des assemblages soudés
• ISO 25239-3:201144058,IS,,ISO 25239-3:2011,Friction stir welding — Aluminium — Part 3: Qualification of welding operators,Soudage par friction-malaxage — Aluminium — Partie 3: Qualification des op
• ISO 25239-4:201144059,IS,,ISO 25239-4:2011,Friction stir welding — Aluminium — Part 4: Specification and qualification of welding procedures,Soudage par friction-malaxage — Aluminium — Partie 4: D
• ISO 25239-5:201144060,IS,,ISO 25239-5:2011,Friction stir welding — Aluminium — Part 5: Quality and inspection requirements,Soudage par friction-malaxage — Aluminium — Partie 5: Exigences de qualit
• ISO 25297-1:201046570,IS,,ISO 25297-1:2010,Optics and photonics — Electronic exchange of optical data — Part 1: NODIF information model,Optique et photonique — Transfert électronique des données o
• ISO 25424:200951772,IS,,ISO 25424:2009,"Sterilization of medical devices — Low temperature steam and formaldehyde — Requirements for development, validation and routine control of a sterilizatio
• ISO 25457:200842929,IS,,ISO 25457:2008,"Petroleum, petrochemical and natural gas industries — Flare details for general refinery and petrochemical service","Industries du pétrole, de la pétrochi
• ISO 25498:201042951,IS,,ISO 25498:2010,Microbeam analysis — Analytical electron microscopy — Selected-area electron diffraction analysis using a transmission electron microscope,Analyse par micr
• ISO 25498:201870359,IS,,ISO 25498:2018,Microbeam analysis — Analytical electron microscopy — Selected area electron diffraction analysis using a transmission electron microscope,Analyse par micr
• ISO 25518:200942964,IS,,ISO 25518:2009,Single-use rubber gloves for general applications — Specification,"Gants en caoutchouc à usages généraux, non réutilisables — Spécifications",2009-09-08,1,
• ISO 25539-1:200335886,IS,,ISO 25539-1:2003,Cardiovascular implants — Endovascular devices — Part 1: Endovascular prostheses,Implants cardiovasculaires — Dispositifs endovasculaires — Partie 1: Pro
• ISO 25539-1:2003/Amd 1:200539203,IS,Amd,ISO 25539-1:2003/Amd 1:2005,Cardiovascular implants — Endovascular devices — Part 1: Endovascular prostheses — Amendment 1: Test methods,Implants cardiovasculaires — D
• ISO 25539-2:200835887,IS,,ISO 25539-2:2008,Cardiovascular implants — Endovascular devices — Part 2: Vascular stents,Implants cardiovasculaires — Dispositifs endovasculaires — Partie 2: Stents vasc
• ISO 25539-2:201260604,IS,,ISO 25539-2:2012,Cardiovascular implants — Endovascular devices — Part 2: Vascular stents,Implants cardiovasculaires — Dispositifs endovasculaires — Partie 2: Endoprothès
• ISO 25539-3:201135888,IS,,ISO 25539-3:2011,Cardiovascular implants — Endovascular devices — Part 3: Vena cava filters,Implants cardiovasculaires — Dispositifs endovasculaires — Partie 3: Filtres c
• ISO 25577:200843005,IS,,ISO 25577:2008,Information and documentation — MarcXchange,Information et documentation — MarcXchange,2008-11-25,1,['35.240.30'],ISO/TC 46/SC 4,9599,,[62878],"['en','fr']
• ISO 25619-1:200843037,IS,,ISO 25619-1:2008,Geosynthetics — Determination of compression behaviour — Part 1: Compressive creep properties,Géosynthétiques — Détermination du comportement en compress
• ISO 25619-2:200843038,IS,,ISO 25619-2:2008,Geosynthetics — Determination of compression behaviour — Part 2: Determination of short-term compression behaviour,Géosynthétiques — Détermination du com
• ISO 25639-1:200843909,IS,,ISO 25639-1:2008,"Exhibitions, shows, fairs and conventions — Part 1: Vocabulary","Terminologie du secteur des foires, salons et congrès ou manifestations commerciales —
• ISO 25649-1:201761400,IS,,ISO 25649-1:2017,"Floating leisure articles for use on and in the water — Part 1: Classification, materials, general requirements and test methods","Articles de loisirs f
• ISO 25649-2:201761401,IS,,ISO 25649-2:2017,Floating leisure articles for use on and in the water — Part 2: Consumer information,Articles de loisirs flottants à utiliser sur ou dans l'eau — Partie
• ISO 25649-3:201761402,IS,,ISO 25649-3:2017,Floating leisure articles for use on and in the water — Part 3: Additional specific safety requirements and test methods for Class A devices,Articles de
• ISO 25649-4:201761403,IS,,ISO 25649-4:2017,Floating leisure articles for use on and in the water — Part 4: Additional specific safety requirements and test methods for Class B devices,Articles de
• ISO 25649-5:201761404,IS,,ISO 25649-5:2017,Floating leisure articles for use on and in the water — Part 5: Additional specific safety requirements and test methods for Class C devices,Articles de
• ISO 25649-6:201761405,IS,,ISO 25649-6:2017,Floating leisure articles for use on and in the water — Part 6: Additional specific safety requirements and test methods for Class D devices,Articles des
• ISO 25649-7:201761406,IS,,ISO 25649-7:2017,Floating leisure articles for use on and in the water — Part 7: Additional specific safety requirements and test methods for Class E devices,Articles de
• ISO 25745-1:201243203,IS,,ISO 25745-1:2012,"Energy performance of lifts, escalators and moving walks — Part 1: Energy measurement and verification","Performance énergétique des ascenseurs, escalie
• ISO 25761:200843210,IS,,ISO 25761:2008,"Plastics — Polyols for use in the production of polyurethanes — Determination of basicity (total amine value), expressed as percent nitrogen",Plastiques —
• ISO 25841:201143282,IS,,ISO 25841:2011,Female condoms — Requirements and test methods,Préservatifs féminins — Exigences et méthodes d'essai,2011-07-08,1,['11.200'],ISO/TC 157,9599,,[64234],['en'
• ISO 25841:201464234,IS,,ISO 25841:2014,Female condoms — Requirements and test methods,Préservatifs féminins — Exigences et méthodes d'essai,2014-01-14,2,['11.200'],ISO/TC 157,9599,[43282],[66676
• ISO 25862:200943301,IS,,ISO 25862:2009,"Ships and marine technology — Marine magnetic compasses, binnacles and azimuth reading devices","Navires et structures maritimes — Compas magnétiques mari
• ISO 25980:201461903,IS,,ISO 25980:2014,"Health and safety in welding and allied processes — Transparent welding curtains, strips and screens for arc welding processes","Hygiène et sécurité en so
• ISO 25981:200843354,IS,,ISO 25981:2008,Road vehicles — Connectors for the electrical connection of towing and towed vehicles — Connectors for electronically monitored charging systems with 12 V
• ISO 25981:2008/Cor 1:200852918,IS,Cor,ISO 25981:2008/Cor 1:2008,Road vehicles — Connectors for the electrical connection of towing and towed vehicles — Connectors for electronically monitored charging syst
• ISO 26021-1:200845456,IS,,ISO 26021-1:2008,Road vehicles — End-of-life activation of on-board pyrotechnic devices — Part 1: General information and use case definitions,Véhicules routiers — Activa
• ISO 26021-2:200845457,IS,,ISO 26021-2:2008,Road vehicles — End-of-life activation of on-board pyrotechnic devices — Part 2: Communication requirements,Véhicules routiers — Activation de fin de vie
• ISO 26021-2:2008/Cor 1:200952986,IS,Cor,ISO 26021-2:2008/Cor 1:2009,Road vehicles — End-of-life activation of on-board pyrotechnic devices — Part 2: Communication requirements — Technical Corrigendum 1,Véhic
• ISO 26021-3:200945458,IS,,ISO 26021-3:2009,Road vehicles — End-of-life activation of on-board pyrotechnic devices — Part 3: Tool requirements,Véhicules routiers — Activation de fin de vie des disp
• ISO 26021-4:200945459,IS,,ISO 26021-4:2009,Road vehicles — End-of-life activation of on-board pyrotechnic devices — Part 4: Additional communication line with bidirectional communication,Véhicules
• ISO 26021-5:200945460,IS,,ISO 26021-5:2009,Road vehicles — End-of-life activation of on-board pyrotechnic devices — Part 5: Additional communication line with pulse width modulated signal,Véhicule
• ISO 26082-1:201254455,IS,,ISO 26082-1:2012,Leather — Physical and mechanical test methods for the determination of soiling — Part 1: Rubbing (Martindale) method,Cuir — Méthodes d'essai physique et
• ISO 26082-1:201975168,IS,,ISO 26082-1:2019,Leather — Physical and mechanical test methods for the determination of soiling — Part 1: Rubbing (Martindale) method,Cuir — Méthodes d'essai physique et
• ISO 26082:200743378,IS,,ISO 26082:2007,Leather - Physical and mechanical tests - Determination of soiling with rubbing for automotive leather,Cuir — Essais physiques et mécaniques — Déterminatio
• ISO 26101:201243384,IS,,ISO 26101:2012,Acoustics — Test methods for the qualification of free-field environments,Acoustique — Méthodes d'essai pour la qualification des environnements en champ l
• ISO 26101:201769870,IS,,ISO 26101:2017,Acoustics — Test methods for the qualification of free-field environments,Acoustique — Méthodes d'essai pour la qualification des environnements en champ l
• ISO 26143:200743394,IS,,ISO 26143:2007,Space data and information transfer systems — Space link extension (SLE) — Return operational control fields service,Systèmes de transfert des données et i
• ISO 26143:201361745,IS,,ISO 26143:2013,Space data and information transfer systems — Space link extension (SLE) — Return operational control fields service,Systèmes de transfert des données et i
• ISO 26146:201254021,IS,,ISO 26146:2012,Corrosion of metals and alloys — Method for metallographic examination of samples after exposure to high-temperature corrosive environments,Corrosion des m
• ISO 26162:201243427,IS,,ISO 26162:2012,"Systems to manage terminology, knowledge and content — Design, implementation and maintenance of terminology management systems","Systèmes de gestion de l
• ISO 26202:200743439,IS,,ISO 26202:2007,Magnesium and magnesium alloys — Magnesium alloys for cast anodes,Magnésium et alliages de magnésium — Alliages de magnésium pour anodes coulées,2007-09-10
• ISO 26203-1:201043441,IS,,ISO 26203-1:2010,Metallic materials — Tensile testing at high strain rates — Part 1: Elastic-bar-type systems,Matériaux métalliques — Essai de traction à vitesses de défo
• ISO 26203-1:201872573,IS,,ISO 26203-1:2018,Metallic materials — Tensile testing at high strain rates — Part 1: Elastic-bar-type systems,Matériaux métalliques — Essai de traction à vitesses de défo
• ISO 26262-1:201143464,IS,,ISO 26262-1:2011,Road vehicles — Functional safety — Part 1: Vocabulary,Véhicules routiers — Sécurité fonctionnelle — Partie 1: Vocabulaire,2011-11-14,1,"['43.040.10','01
• ISO 26262-2:201151356,IS,,ISO 26262-2:2011,Road vehicles — Functional safety — Part 2: Management of functional safety,Véhicules routiers — Sécurité fonctionnelle — Partie 2: Gestion de la sécurit
• ISO 26262-3:201151358,IS,,ISO 26262-3:2011,Road vehicles — Functional safety — Part 3: Concept phase,Véhicules routiers — Sécurité fonctionnelle — Partie 3: Phase de projet,2011-11-14,1,['43.040.1
• ISO 26262-4:201151359,IS,,ISO 26262-4:2011,Road vehicles — Functional safety — Part 4: Product development at the system level,Véhicules routiers — Sécurité fonctionnelle — Partie 4: Développement
• ISO 26262-5:201151360,IS,,ISO 26262-5:2011,Road vehicles — Functional safety — Part 5: Product development at the hardware level,Véhicules routiers — Sécurité fonctionnelle — Partie 5: Développeme
• ISO 26262-6:201151362,IS,,ISO 26262-6:2011,Road vehicles — Functional safety — Part 6: Product development at the software level,Véhicules routiers — Sécurité fonctionnelle — Partie 6: Développeme
• ISO 26262-7:201151363,IS,,ISO 26262-7:2011,Road vehicles — Functional safety — Part 7: Production and operation,Véhicules routiers — Sécurité fonctionnelle — Partie 7: Production et utilisation,20
• ISO 26262-8:201151364,IS,,ISO 26262-8:2011,Road vehicles — Functional safety — Part 8: Supporting processes,Véhicules routiers — Sécurité fonctionnelle — Partie 8: Processus d'appui,2011-11-14,1,[
• ISO 26262-9:201151365,IS,,ISO 26262-9:2011,Road vehicles — Functional safety — Part 9: Automotive Safety Integrity Level (ASIL)-oriented and safety-oriented analyses,Véhicules routiers — Sécurité
• ISO 26262-10:201254591,IS,,ISO 26262-10:2012,Road vehicles — Functional safety — Part 10: Guideline on ISO 26262,Véhicules routiers — Sécurité fonctionnelle — Partie 10: Lignes directrices relative
• ISO 26303:201260602,IS,,ISO 26303:2012,Machine tools — Short-term capability evaluation of machining processes on metal-cutting machine tools,Machines-outils — Évaluation de la capacité des proc
• ISO 26304:200843488,IS,,ISO 26304:2008,"Welding consumables — Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of high strength steels —
• ISO 26304:2008/Cor 1:200954024,IS,Cor,ISO 26304:2008/Cor 1:2009,"Welding consumables — Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of high stre
• ISO 26304:201157190,IS,,ISO 26304:2011,"Welding consumables — Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of high strength steels —
• ISO 26304:201772417,IS,,ISO 26304:2017,"Welding consumables — Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of high strength steels —
• ISO 26324:201243506,IS,,ISO 26324:2012,Information and documentation — Digital object identifier system,Information et documentation — Système d'identifiant numérique d'objet,2012-04-23,1,['01.1
• ISO 26324:202281599,IS,,ISO 26324:2022,Information and documentation — Digital object identifier system,Information et documentation — Système d'identifiant numérique d'objet,2022-08-26,2,['01.1
• ISO 26362:200943521,IS,,ISO 26362:2009,"Access panels in market, opinion and social research — Vocabulary and service requirements","«Access panels» pour les études de marché, études sociales et
• ISO 26367-1:201143529,IS,,ISO 26367-1:2011,Guidelines for assessing the adverse environmental impact of fire effluents — Part 1: General,Lignes directrices pour déterminer l'impact environnemental
• ISO 26422:201143575,IS,,ISO 26422:2011,Petroleum and related products — Determination of shear stability of lubricating oils containing polymers — Method using a tapered roller bearing,Pétrole e
• ISO 26443:200843584,IS,,ISO 26443:2008,"Fine ceramics (advanced ceramics, advanced technical ceramics) — Rockwell indentation test for evaluation of adhesion of ceramic coatings",Céramiques tech
• ISO 26602:200943618,IS,,ISO 26602:2009,"Fine ceramics (advanced ceramics, advanced technical ceramics) — Silicon nitride materials for rolling bearing balls",Céramiques techniques — Matériaux en
• ISO 26603:200843623,IS,,ISO 26603:2008,Plastics — Aromatic isocyanates for use in the production of polyurethanes — Determination of total chlorine,Plastiques — Isocyanates aromatiques utilisés
• ISO 26603:201772472,IS,,ISO 26603:2017,Plastics — Aromatic isocyanates for use in the production of polyurethanes — Determination of total chlorine,Plastiques — Isocyanates aromatiques utilisés
• ISO 26622-1:200843627,IS,,ISO 26622-1:2008,Modular taper interface with ball track system — Part 1: Dimensions and designation of shanks,Interfaces à cône modulaire avec système de serrage à bille
• ISO 26623-1:200843629,IS,,ISO 26623-1:2008,Polygonal taper interface with flange contact surface — Part 1: Dimensions and designation of shanks,Interfaces à cône polygonal avec face d'appui — Part
• ISO 26623-1:201460401,IS,,ISO 26623-1:2014,Polygonal taper interface with flange contact surface — Part 1: Dimensions and designation of shanks,Interfaces à cône polygonal avec face d'appui — Part
• ISO 26623-2:200843630,IS,,ISO 26623-2:2008,Polygonal taper interface with flange contact surface — Part 2: Dimensions and designation of receivers,Interfaces à cône polygonal avec face d'appui — P
• ISO 26722:200943700,IS,,ISO 26722:2009,Water treatment equipment for haemodialysis applications and related therapies,Équipement de traitement de l'eau pour des applications en hémodialyse et au
• ISO 26722:201461864,IS,,ISO 26722:2014,Water treatment equipment for haemodialysis applications and related therapies,Équipement de traitement de l'eau pour des applications en hémodialyse et au
• ISO 26824:201343807,IS,,ISO 26824:2013,Particle characterization of particulate systems — Vocabulary,Caractérisation des particules dans les systèmes particulaires — Vocabulaire,2013-07-15,1,"['
• ISO 26825:200843811,IS,,ISO 26825:2008,"Anaesthetic and respiratory equipment — User-applied labels for syringes containing drugs used during anaesthesia — Colours, design and performance","Maté
• ISO 26842-1:200953679,IS,,ISO 26842-1:2009,Adhesives — Test methods for the evaluation and selection of adhesives for indoor wood products — Part 1: Resistance to delamination in non-severe enviro
• ISO 26842-1:201356800,IS,,ISO 26842-1:2013,Adhesives — Test methods for the evaluation and selection of adhesives for indoor wood products — Part 1: Resistance to delamination in non-severe enviro
• ISO 26842-2:200953680,IS,,ISO 26842-2:2009,Adhesives — Test methods for the evaluation and selection of adhesives for indoor wood products — Part 2: Resistance to delamination in severe environmen
• ISO 26842-2:201356801,IS,,ISO 26842-2:2013,Adhesives — Test methods for the evaluation and selection of adhesives for indoor wood products — Part 2: Resistance to delamination in severe environmen
• ISO 26870:200943851,IS,,ISO 26870:2009,Space systems — Launch pad and integration site operational documents,Systèmes spatiaux — Documents opérationnels pour aire de lancement et site d'intégrat
• ISO 26871:201257528,IS,,ISO 26871:2012,Space systems — Explosive systems and devices,Systèmes spaciaux — Dispositifs et equipements explosifs,2012-11-27,1,['49.140'],ISO/TC 20/SC 14,9599,,[74186
• ISO 26872:201043853,IS,,ISO 26872:2010,Space systems — Disposal of satellites operating at geosynchronous altitude,Systèmes spatiaux — Élimination des satellites opérant à une altitude géostionn
• ISO 26872:201974189,IS,,ISO 26872:2019,Space systems — Disposal of satellites operating at geosynchronous altitude,Systèmes spatiaux — Élimination des satellites opérant à une altitude géostionn
• ISO 26900:201246135,IS,,ISO 26900:2012,Space data and information transfer systems — Orbit data messages,Systèmes de transfert des informations et données spatiales — Messages pour données d'orb
• ISO 26906:200943894,IS,,ISO 26906:2009,Hydrometry — Fishpasses at flow measurement structures,Hydrométrie — Échelles à poissons auprès des structures mesurant le débit,2009-03-25,1,['17.120.20']
• ISO 26910-1:200943903,IS,,ISO 26910-1:2009,Springs — Shot peening — Part 1: General procedures,Ressorts — Grenaillage de précontrainte — Partie 1: Modes opératoires généraux,2009-06-08,1,['21.160'
• ISO 26910-1:2009/Amd 1:201767843,IS,Amd,ISO 26910-1:2009/Amd 1:2017,Springs — Shot peening — Part 1: General procedures — Amendment 1,Ressorts — Grenaillage de précontrainte — Partie 1: Modes opératoires gén
• ISO 26945:200843928,IS,,ISO 26945:2008,Metallic and other inorganic coatings — Electrodeposited coatings of tin-cobalt alloy,Revêtements métalliques et autres revêtements inorganiques — Dépôts é
• ISO 27020:201043959,IS,,ISO 27020:2010,Dentistry — Brackets and tubes for use in orthodontics,Médecine bucco-dentaire — Consoles et tubes utilisés en orthodontie,2010-12-13,1,['11.060.10'],ISO/T
• ISO 27025:201043960,IS,,ISO 27025:2010,Space systems — Programme management — Quality assurance requirements,Systèmes spatiaux — Management de programme — Exigences pour assurance qualité,2010-0
• ISO 27026:201143961,IS,,ISO 27026:2011,Space systems — Programme management — Breakdown of project management structures,Systèmes spatiaux — Management de programme — Éléments de structures de g
• ISO 27027:200843962,IS,,ISO 27027:2008,Aerospace — Solid-state remote power controllers — General performance requirements,Aéronautique et espace — Contacteurs-disjoncteurs statiques commandés à
• ISO 27065:201154133,IS,,ISO 27065:2011,Protective clothing — Performance requirements for protective clothing worn by operators applying liquid pesticides,Vêtements de protection — Exigences de
• ISO 27126:201462012,IS,,ISO 27126:2014,"Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals — Specification","Tuyaux et
• ISO 27127:201462013,IS,,ISO 27127:2014,Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas — Specification,Tuy
• ISO 27145-4:201246278,IS,,ISO 27145-4:2012,Road vehicles — Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements — Part 4: Connection between vehicle an
• ISO 27145-6:201562445,IS,,ISO 27145-6:2015,Road vehicles — Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements — Part 6: External test equipment,Véhic
• ISO 27186:201044045,IS,,ISO 27186:2010,Active implantable medical devices — Four-pole connector system for implantable cardiac rhythm management devices - Dimensional and test requirements,Dispo
• ISO 27186:202072920,IS,,ISO 27186:2020,Active implantable medical devices — Four-pole connector system for implantable cardiac rhythm management devices — Dimensional and test requirements,Dispo
• ISO 27269:202179491,IS,,ISO 27269:2021,Health informatics — International patient summary,Informatique de santé — Résumé international du dossier médical du patient,2021-04-08,1,['35.240.80'],IS
• ISO 27306:200944089,IS,,ISO 27306:2009,Metallic materials — Method of constraint loss correction of CTOD fracture toughness for fracture assessment of steel components,Matériaux métalliques — Mé
• ISO 27427:200944150,IS,,ISO 27427:2009,Anaesthetic and respiratory equipment — Nebulizing systems and components,Matériel d'anesthésie et de réanimation respiratoire — Systèmes de nébulisation e
• ISO 27427:201055471,IS,,ISO 27427:2010,Anaesthetic and respiratory equipment — Nebulizing systems and components,Matériel d'anesthésie et de réanimation respiratoire — Systèmes de nébulisation e
• ISO 27427:201359482,IS,,ISO 27427:2013,Anaesthetic and respiratory equipment — Nebulizing systems and components,Matériel d'anesthésie et de réanimation respiratoire — Systèmes de nébulisation e
• ISO 27447:200944156,IS,,ISO 27447:2009,"Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for antibacterial activity of semiconducting photocatalytic materials",Cérami
• ISO 27509:201244203,IS,,ISO 27509:2012,Petroleum and natural gas industries — Compact flanged connections with IX seal ring,Industries du pétrole et du gaz naturel — Raccordements à brides compa
• ISO 27509:2012/Cor 1:201364726,IS,Cor,ISO 27509:2012/Cor 1:2013,Petroleum and natural gas industries — Compact flanged connections with IX seal ring — Technical Corrigendum 1,Industries du pétrole et du ga
• ISO 27547-1:201044222,IS,,ISO 27547-1:2010,"Plastics — Preparation of test specimens of thermoplastic materials using mouldless technologies — Part 1: General principles, and laser sintering of te
• ISO 27587:200944234,IS,,ISO 27587:2009,Leather — Chemical tests — Determination of the free formaldehyde in process auxiliaries,Cuir — Essais chimiques — Dosage du formaldéhyde libre dans les au
• ISO 27588:200844235,IS,,ISO 27588:2008,"Rubber, vulcanized or thermoplastic — Determination of dead-load hardness using the very low rubber hardness (VLRH) scale",Caoutchouc vulcanisé ou thermop
• ISO 27588:201261509,IS,,ISO 27588:2012,"Rubber, vulcanized or thermoplastic — Determination of dead-load hardness using the very low rubber hardness (VLRH) scale",Caoutchouc vulcanisé ou thermop
• ISO 27668-1:200944272,IS,,ISO 27668-1:2009,Gel ink ball pens and refills — Part 1: General use,Stylos à bille à encre gel et recharges — Partie 1: Utilisation générale,2009-01-27,1,['97.180'],ISO/
• ISO 27668-1:201669122,IS,,ISO 27668-1:2016,Gel ink ball pens and refills — Part 1: General use,Stylos à bille à encre gel et recharges — Partie 1: Utilisation générale,2016-10-13,2,['97.180'],ISO/
• ISO 27729:201244292,IS,,ISO 27729:2012,Information and documentation — International standard name identifier (ISNI),Information et documentation — Code international normalisé des noms (ISNI),2
• ISO 27729:2012/Cor 1:201364745,IS,Cor,ISO 27729:2012/Cor 1:2013,Information and documentation — International standard name identifier (ISNI) — Technical Corrigendum 1,Information et documentation — Code i
• ISO 27769-1:200946177,IS,,ISO 27769-1:2009,Wood-based panels — Wet-process fibreboard — Part 1: Classifications,Panneaux à base de bois — Panneau de fibres obtenu par procédé humide — Partie 1: Cl
• ISO 27769-2:200946178,IS,,ISO 27769-2:2009,Wood-based panels — Wet-process fibreboard — Part 2: Requirements,Panneaux à base de bois — Panneaux de fibres obtenus par procédé humide — Partie 2: Spé
• ISO 27789:201344315,IS,,ISO 27789:2013,Health informatics — Audit trails for electronic health records,Informatique de santé — Historique d'expertise des dossiers de santé informatisés,2013-02-2
• ISO 27799:200841298,IS,,ISO 27799:2008,Health informatics — Information security management in health using ISO/IEC 27002,Informatique de santé — Management de la sécurité de l'information relat
• ISO 27799:201662777,IS,,ISO 27799:2016,Health informatics — Information security management in health using ISO/IEC 27002,Informatique de santé — Management de la sécurité de l'information relat
• ISO 27830:200844345,IS,,ISO 27830:2008,Metallic and other inorganic coatings — Guidelines for specifying metallic and inorganic coatings,Revêtements métalliques et autres revêtements inorganique
• ISO 27852:201144388,IS,,ISO 27852:2011,Space systems — Estimation of orbit lifetime,Systèmes spatiaux — Estimation de la durée de vie en orbite,2011-07-13,1,['49.140'],ISO/TC 20/SC 14,9599,,[685
• ISO 27852:201668572,IS,,ISO 27852:2016,Space systems — Estimation of orbit lifetime,Systèmes spatiaux — Estimation de la durée de vie en orbite,2016-07-04,2,['49.140'],ISO/TC 20/SC 14,9599,[4438
• ISO 27875:201044393,IS,,ISO 27875:2010,Space systems — Re-entry risk management for unmanned spacecraft and launch vehicle orbital stages,Systèmes spatiaux — Gestion du risque de la rentrée pour
• ISO 27875:2010/Amd 1:201669755,IS,Amd,ISO 27875:2010/Amd 1:2016,Space systems — Re-entry risk management for unmanned spacecraft and launch vehicle orbital stages — Amendment 1,Systèmes spatiaux — Gestion
• ISO 27875:201974251,IS,,ISO 27875:2019,Space systems — Re-entry risk management for unmanned spacecraft and launch vehicle orbital stages,Systèmes spatiaux — Gestion du risque de la rentrée pour
• ISO 27875:2019/Amd 1:202080027,IS,Amd,ISO 27875:2019/Amd 1:2020,"Space systems — Re-entry risk management for unmanned spacecraft and launch vehicle orbital stages — Amendment 1: Formula to obtain Ec by th
• ISO 27893:201158068,IS,,ISO 27893:2011,Vacuum technology — Vacuum gauges — Evaluation of the uncertainties of results of calibrations by direct comparison with a reference gauge,Technique du vid
• ISO 27913:201664235,IS,,ISO 27913:2016,"Carbon dioxide capture, transportation and geological storage — Pipeline transportation systems","Captage du dioxyde de carbone, transport et stockage géo
• ISO 27914:201764148,IS,,ISO 27914:2017,"Carbon dioxide capture, transportation and geological storage — Geological storage","Capture, transport et stockage géologique du dioxyde de carbone — Sto
• ISO 27916:201965937,IS,,ISO 27916:2019,"Carbon dioxide capture, transportation and geological storage — Carbon dioxide storage using enhanced oil recovery (CO2-EOR)","Captage, transport et stock
• ISO 27971:200844449,IS,,ISO 27971:2008,Cereals and cereal products — Common wheat (Triticum aestivum L.) — Determination of alveograph properties of dough at constant hydration from commercial o
• ISO 27971:201563535,IS,,ISO 27971:2015,Cereals and cereal products — Common wheat (Triticum aestivum L.) — Determination of alveograph properties of dough at constant hydration from commercial o
• ISO 27996:200944461,IS,,ISO 27996:2009,Aerospace fluid systems — Elastomer seals — Storage and shelf life,Systèmes de fluides pour l'aéronautique et l'espace — Joints élastomères — Stockage et d
• ISO 28000:200744641,IS,,ISO 28000:2007,Specification for security management systems for the supply chain,Spécifications relatives aux systèmes de management de la sûreté de la chaîne d'approvis
• ISO 28005-1:201354105,IS,,ISO 28005-1:2013,Security management systems for the supply chain — Electronic port clearance (EPC) — Part 1: Message structures,Systèmes de management de la sécurité pou
• ISO 28005-2:201142144,IS,,ISO 28005-2:2011,Security management systems for the supply chain — Electronic port clearance (EPC) — Part 2: Core data elements,Systèmes de management de la sécurité pou
• ISO 28017:200944466,IS,,ISO 28017:2009,"Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications — Specification","Tuyaux et flexibles en caoutchouc, à armature te
• ISO 28017:201155657,IS,,ISO 28017:2011,"Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications — Specification","Tuyaux et flexibles en caoutchouc, à armature te
• ISO 28017:2011/Amd 1:201565377,IS,Amd,ISO 28017:2011/Amd 1:2015,"Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications — Specification — Amendment 1","Tuyaux et flexibles
• ISO 28017:201872842,IS,,ISO 28017:2018,"Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications — Specification","Tuyaux et flexibles en caoutchouc, à armature te
• ISO 28057:201444482,IS,,ISO 28057:2014,Dosimetry with solid thermoluminescence detectors for photon and electron radiations in radiotherapy,Dosimétrie avec détecteurs de thermolumiscence solides
• ISO 28077:200644492,IS,,ISO 28077:2006,Photocarcinogenesis action spectrum (non-melanoma skin cancers),Spectre d'action de la photocarcinogenèse (cancers de la peau hors mélanome),2006-12-14,1,"
• ISO 28078-1:200944506,IS,,ISO 28078-1:2009,Plastics — Poly(phenylene sulfide) (PPS) moulding and extrusion materials — Part 1: Designation system and basis for specifications,Plastiques — Matériau
• ISO 28078-2:200944494,IS,,ISO 28078-2:2009,Plastics — Poly(phenylene sulfide) (PPS) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties,Plastiq
• ISO 28079:200944495,IS,,ISO 28079:2009,Hardmetals — Palmqvist toughness test,Métaux durs — Méthode d'essai de dureté de Palmqvist,2009-07-14,1,"['77.160','77.040.10']",ISO/TC 119/SC 4,9599,,[857
• ISO 28080:201144496,IS,,ISO 28080:2011,Hardmetals — Abrasion tests for hardmetals,Métaux-durs — Méthodes d'essai d'abrasion des métaux-durs,2011-01-25,1,"['77.160','77.040.10']",ISO/TC 119/SC 4,
• ISO 28139:200944519,IS,,ISO 28139:2009,Agricultural and forestry machinery — Knapsack combustion-engine-driven mistblowers — Safety requirements,Matériel agricole et forestier — Nébulisateurs po
• ISO 28158:201044521,IS,,ISO 28158:2010,Dentistry — Integrated dental floss and handles,Médecine bucco-dentaire — Porte-fil et fil dentaire intégré,2010-06-18,1,['97.170'],ISO/TC 106/SC 7,9599,,[
• ISO 28178:200944527,IS,,ISO 28178:2009,Graphic technology — Exchange format for colour and process control data using XML or ASCII text,Technologie graphique — Format d'échange pour les données
• ISO 28198:200944529,IS,,ISO 28198:2009,Vegetable fats and oils — Determination of toluene insoluble matter,Corps gras d'origine végétale — Détermination des matières insolubles dans le toluène,2
• ISO 28199-1:200944530,IS,,ISO 28199-1:2009,Paints and varnishes — Evaluation of properties of coating systems related to the application process — Part 1: Relevant vocabulary and preparation of te
• ISO 28199-1:2009/Cor 1:200955501,IS,Cor,ISO 28199-1:2009/Cor 1:2009,Paints and varnishes — Evaluation of properties of coating systems related to the application process — Part 1: Relevant vocabulary and pre
• ISO 28199-2:200944531,IS,,ISO 28199-2:2009,"Paints and varnishes — Evaluation of properties of coating systems related to the application process — Part 2: Colour stability, process hiding power,
• ISO 28199-3:200944532,IS,,ISO 28199-3:2009,"Paints and varnishes — Evaluation of properties of coating systems related to the application process — Part 3: Visual assessment of sagging, formation
• ISO 28219:200944534,IS,,ISO 28219:2009,Packaging — Labelling and direct product marking with linear bar code and two-dimensional symbols,Emballage — Étiquetage et marquage direct sur le produit
• ISO 28219:201765014,IS,,ISO 28219:2017,Packaging — Labelling and direct product marking with linear bar code and two-dimensional symbols,Emballage — Étiquetage et marquage direct sur le produit
• ISO 28319:201044645,IS,,ISO 28319:2010,Dentistry — Laser welding,Médecine bucco-dentaire — Soudage par laser,2010-05-18,1,['11.060.10'],ISO/TC 106/SC 2,9599,,[70629],"['en','fr']",13
• ISO 28399:201144686,IS,,ISO 28399:2011,Dentistry — Products for external tooth bleaching,"Médecine bucco-dentaire — Produits d'éclaircissement dentaire, à usage externe",2011-01-14,1,['97.170'],
• ISO 28399:202070368,IS,,ISO 28399:2020,Dentistry — External tooth bleaching products,Médecine bucco-dentaire — Produits d'éclaircissement dentaire par voie externe,2020-03-10,2,['97.170'],ISO/TC
• ISO 28401:201044689,IS,,ISO 28401:2010,Light metals and their alloys — Titanium and titanium alloys — Classification and terminology,Métaux légers et leurs alliages — Titane et alliages de titan
• ISO 28500:200944717,IS,,ISO 28500:2009,Information and documentation — WARC file format,Information et documentation — Format de fichier WARC,2009-05-13,1,['35.240.30'],ISO/TC 46/SC 4,9599,,[680
• ISO 28560-1:201150996,IS,,ISO 28560-1:2011,Information and documentation — RFID in libraries — Part 1: Data elements and general guidelines for implementation,Information et documentation — RFID d
• ISO 28560-1:201465203,IS,,ISO 28560-1:2014,Information and documentation — RFID in libraries — Part 1: Data elements and general guidelines for implementation,Information et documentation — RFID d
• ISO 28560-2:201150997,IS,,ISO 28560-2:2011,Information and documentation — RFID in libraries — Part 2: Encoding of RFID data elements based on rules from ISO/IEC 15962,Information et documentation
• ISO 28560-2:201465204,IS,,ISO 28560-2:2014,Information and documentation — RFID in libraries — Part 2: Encoding of RFID data elements based on rules from ISO/IEC 15962,Information et documentation
• ISO 28560-2:201875672,IS,,ISO 28560-2:2018,Information and documentation — RFID in libraries — Part 2: Encoding of RFID data elements based on rules from ISO/IEC 15962,Information et documentation
• ISO 28560-3:201150998,IS,,ISO 28560-3:2011,Information and documentation — RFID in libraries — Part 3: Fixed length encoding,Information et documentation — RFID dans les bibliothèques — Partie 3:
• ISO 28560-3:201465205,IS,,ISO 28560-3:2014,Information and documentation — RFID in libraries — Part 3: Fixed length encoding,Information et documentation — RFID dans les bibliothèques — Partie 3:
• ISO 28560-3:202385150,IS,,ISO 28560-3:2023,Information and documentation — RFID in libraries — Part 3: Fixed length encoding,Information et documentation — RFID dans les bibliothèques — Partie 3:
• ISO 28564-1:201044762,IS,,ISO 28564-1:2010,"Public information guidance systems — Part 1: Design principles and element requirements for location plans, maps and diagrams","Systèmes de guidage des
• ISO 28580:200944770,IS,,ISO 28580:2009,"Passenger car, truck and bus tyres — Methods of measuring rolling resistance — Single point test and correlation of measurement results","Pneumatiques pou
• ISO 28620:201044810,IS,,ISO 28620:2010,Medical devices — Non-electrically driven portable infusion devices,"Dispositifs médicaux — Diffuseurs portables de médicaments, non mus électriquement",20
• ISO 28641:201044842,IS,,ISO 28641:2010,Rubber compounding ingredients — Organic chemicals — General test methods,Ingrédients de mélange du caoutchouc — Produits chimiques organiques — Méthodes d
• ISO 28641:201870405,IS,,ISO 28641:2018,Rubber compounding ingredients — Organic chemicals — General test methods,Ingrédients de mélange du caoutchouc — Produits chimiques organiques — Méthodes d
• ISO 28706-2:200844894,IS,,ISO 28706-2:2008,"Vitreous and porcelain enamels — Determination of resistance to chemical corrosion — Part 2: Determination of resistance to chemical corrosion by boilin
• ISO 28706-3:200844895,IS,,ISO 28706-3:2008,Vitreous and porcelain enamels — Determination of resistance to chemical corrosion — Part 3: Determination of resistance to chemical corrosion by alkalin
• ISO 28706-4:200844896,IS,,ISO 28706-4:2008,Vitreous and porcelain enamels — Determination of resistance to chemical corrosion — Part 4: Determination of resistance to chemical corrosion by alkalin
• ISO 28706-5:200844897,IS,,ISO 28706-5:2008,Vitreous and porcelain enamels — Determination of resistance to chemical corrosion — Part 5: Determination of resistance to chemical corrosion in closed
• ISO 28721-1:200845036,IS,,ISO 28721-1:2008,"Vitreous and porcelain enamels — Glass-lined apparatus for process plants — Part 1: Quality requirements for apparatus, components, appliances and acces
• ISO 28721-2:200844899,IS,,ISO 28721-2:2008,Vitreous and porcelain enamels — Glass-lined apparatus for process plants — Part 2: Designation and specification of resistance to chemical attack and th
• ISO 28721-2:201566379,IS,,ISO 28721-2:2015,Vitreous and porcelain enamels — Glass-lined apparatus for process plants — Part 2: Designation and specification of resistance to chemical attack and th
• ISO 28721-4:201056670,IS,,ISO 28721-4:2010,Vitreous and porcelain enamels — Glass-lined apparatus for process plants — Part 4: Quality requirements for glass-lined flanged steel pipes and flanged
• ISO 28741:200944904,IS,,ISO 28741:2009,Road vehicles — Spark-plugs and their cylinder head housings — Basic characteristics and dimensions,Véhicules routiers — Bougies d'allumage et leur logemen
• ISO 28741:2009/Cor 1:200955079,IS,Cor,ISO 28741:2009/Cor 1:2009,Road vehicles — Spark-plugs and their cylinder head housings — Basic characteristics and dimensions — Technical Corrigendum 1,Véhicules routi
• ISO 28741:201356857,IS,,ISO 28741:2013,Road vehicles — Spark-plugs and their cylinder head housings — Basic characteristics and dimensions,Véhicules routiers — Bougies d'allumage et leur logemen
• ISO 28762:200844932,IS,,ISO 28762:2008,Vitreous and porcelain enamels — Enamel coatings applied to steel for writing surfaces — Specification,Émaux vitrifiés - Revêtements en émail appliqués sur
• ISO 28763:200844933,IS,,ISO 28763:2008,"Vitreous and porcelain enamels — Regenerative, enamelled and packed panels for air-gas and gas-gas heat exchangers — Specifications",Émaux vitrifiés — Éc
• ISO 28764:200844934,IS,,ISO 28764:2008,"Vitreous and porcelain enamels — Production of specimens for testing enamels on sheet steel, sheet aluminium and cast iron","Émaux vitrifiés — Production
• ISO 28765:200844935,IS,,ISO 28765:2008,Vitreous and porcelain enamels — Design of bolted steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges,Émaux
• ISO 28765:201666382,IS,,ISO 28765:2016,Vitreous and porcelain enamels — Design of bolted steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges,Émaux
• ISO 28801:201144963,IS,,ISO 28801:2011,"Double sampling plans by attributes with minimal sample sizes, indexed by producer's risk quality (PRQ) and consumer's risk quality (CRQ)","Plans d'échant
• ISO 28881:201345002,IS,,ISO 28881:2013,Machine tools — Safety — Electro-discharge machines,Machines-outils — Sécurité — Machines d'électro-érosion,2013-07-24,1,['25.080.01'],ISO/TC 39/SC 10,9599
• ISO 28881:2013/Cor 1:201364870,IS,Cor,ISO 28881:2013/Cor 1:2013,Machine tools — Safety — Electro-discharge machines — Technical Corrigendum 1,Machines-outils — Sécurité — Machines d'électro-érosion — Recti

← records 18,001–18,400 · All of Withdrawn and superseded ISO standards · records 18,801 on →