Records 8,401–8,800 — Withdrawn and superseded ISO standards

Records 8,401 to 8,800 of 24,640. Each links to its own page, which carries the source URL and the quoted line that states the value.

• ISO 6851:198713360,IS,,ISO 6851:1987,Photography — Processing waste — Determination of total amino nitrogen — Microdiffusion Kjeldahl method,Photographie — Effluents de traitements — Déterminat
• ISO 6853:198713362,IS,,ISO 6853:1987,Photography — Processing waste — Determination of ammoniacal nitrogen content — Microdiffusion method,Photographie — Effluents de traitements — Déterminatio
• ISO 6855:198313364,IS,,ISO 6855:1983,Road vehicles — Measurement methods for gaseous pollutants emitted by mopeds equipped with a controlled ignition engine,Véhicules routiers — Méthodes de mes
• ISO 6856:198113365,IS,,ISO 6856:1981,Road vehicles — Unscreened high-tension ignition cable assemblies — General requirements and test methods,Véhicules routiers — Assemblages de câble d'alluma
• ISO 6856:199013366,IS,,ISO 6856:1990,Road vehicles — Unscreened high-tension ignition cable assemblies — General requirements and test methods,Véhicules routiers — Assemblages de câbles d'allum
• ISO 6858:198213367,IS,,ISO 6858:1982,Aircraft — Ground support electrical supplies — General requirements,Aéronefs — Alimentations électriques de service au sol des avions — Conditions générale
• ISO 6860:198413373,IS,,ISO 6860:1984,Paints and varnishes — Bend test (conical mandrel),Peintures et vernis — Essai de pliage (mandrin conique),1984-05-01,1,['87.040'],ISO/TC 35/SC 9,9599,,[369
• ISO 6864:198413376,IS,,ISO 6864:1984,"Plain bearings — Thin-walled flanged half bearings — Dimensions, tolerances and methods of checking","Paliers lisses — Demi-coussinets minces à collerettes
• ISO 6870:198513384,IS,,ISO 6870:1985,Animal feeding stuffs — Determination of zearalenone content,Aliments des animaux — Dosage de la zéaralénone,1985-11-14,1,['65.120'],ISO/TC 34/SC 10,9599,,"
• ISO 6871-1:199413387,IS,,ISO 6871-1:1994,Dental base metal casting alloys — Part 1: Cobalt-based alloys,Alliages dentaires non précieux à couler — Partie 1: Alliages à base de cobalt,1994-09-15,1
• ISO 6871-1:1994/Amd 1:200540005,IS,Amd,ISO 6871-1:1994/Amd 1:2005,Dental base metal casting alloys — Part 1: Cobalt-based alloys — Amendment 1,Alliages dentaires non précieux à couler — Partie 1: Alliages à
• ISO 6871-1:1994/Cor 1:199830885,IS,Cor,ISO 6871-1:1994/Cor 1:1998,Dental base metal casting alloys — Part 1: Cobalt-based alloys — Technical Corrigendum 1,Alliages dentaires non précieux à couler — Partie 1
• ISO 6871-2:199422058,IS,,ISO 6871-2:1994,Dental base metal casting alloys — Part 2: Nickel-based alloys,Alliages dentaires non précieux à couler — Partie 2: Alliages à base de nickel,1994-09-15,1
• ISO 6871-2:1994/Amd 1:200540596,IS,Amd,ISO 6871-2:1994/Amd 1:2005,Dental base metal casting alloys — Part 2: Nickel-based alloys — Amendment 1,Alliages dentaires non précieux à couler — Partie 2: Alliages à
• ISO 6871:198713386,IS,,ISO 6871:1987,Dental base metal casting alloys,Alliages dentaires non précieux à couler,1987-01-29,1,['11.060.10'],ISO/TC 106/SC 2,9599,,"[13387,22058]","['en','fr']",5
• ISO 6872:198413388,IS,,ISO 6872:1984,Dental ceramic,Céramique dentaire,1984-06-01,1,['11.060.10'],ISO/TC 106/SC 2,9599,,[13389],"['en','fr']",14
• ISO 6872:199513389,IS,,ISO 6872:1995,Dental ceramic,Céramique dentaire,1995-08-24,2,['11.060.10'],ISO/TC 106/SC 2,9599,[13388],[41385],"['en','fr']",9
• ISO 6872:1995/Amd 1:199727400,IS,Amd,ISO 6872:1995/Amd 1:1997,Dental ceramic — Amendment 1,Céramique dentaire — Amendement 1,1997-11-27,2,['11.060.10'],ISO/TC 106/SC 2,9599,,[41385],"['en','fr']",1
• ISO 6872:200841385,IS,,ISO 6872:2008,Dentistry — Ceramic materials,Art dentaire — Produits céramiques,2008-08-26,3,['11.060.10'],ISO/TC 106/SC 2,9599,"[13389,27400]",[59936],"['en','fr']",24
• ISO 6872:201559936,IS,,ISO 6872:2015,Dentistry — Ceramic materials,Médecine bucco-dentaire — Matériaux céramiques,2015-06-01,4,['11.060.10'],ISO/TC 106/SC 2,9599,[41385],"[70085,79669,81718]","
• ISO 6872:2015/Amd 1:201874247,IS,Amd,ISO 6872:2015/Amd 1:2018,Dentistry — Ceramic materials — Amendment 1,Médecine bucco-dentaire — Matériaux céramiques — Amendement 1,2018-04-23,4,['11.060.10'],ISO/TC 10
• ISO 6873:198313390,IS,,ISO 6873:1983,Dental gypsum products,Produits dentaires à base de gypse,1983-11-01,1,['11.060.10'],ISO/TC 106/SC 2,9599,,[13391],"['en','fr']",8
• ISO 6873:199813391,IS,,ISO 6873:1998,Dental gypsum products,Produits dentaires à base de gypse,1998-03-05,2,['11.060.10'],ISO/TC 106/SC 2,9599,[13390],[54423],"['en','fr']",11
• ISO 6874:198813392,IS,,ISO 6874:1988,Dental resin-based pit and fissure sealants,Produits dentaires à base de résine pour comblement des puits et fissures,1988-11-03,1,['11.060.10'],ISO/TC 106/
• ISO 6874:200536495,IS,,ISO 6874:2005,Dentistry — Polymer-based pit and fissure sealants,Art dentaire — Produits dentaires à base de polymères pour comblement des puits et fissures,2005-08-29,2,
• ISO 6875:198813393,IS,,ISO 6875:1988,Dental patient chair,Fauteuil dentaire,1988-12-01,1,['11.060.20'],ISO/TC 106/SC 6,9599,,[13394],"['en','fr']",9
• ISO 6875:199513394,IS,,ISO 6875:1995,Dental patient chair,Fauteuil dentaire,1995-01-26,2,['11.060.20'],ISO/TC 106/SC 6,9599,[13393],[52117],"['en','fr']",11
• ISO 6875:201152117,IS,,ISO 6875:2011,Dentistry — Patient chair,Médecine bucco-dentaire — Fauteuil dentaire,2011-06-29,3,['11.060.20'],ISO/TC 106/SC 6,9599,[13394],[69100],"['en','fr']",8
• ISO 6876:198613395,IS,,ISO 6876:1986,Dental root canal sealing materials,Produits dentaires pour le scellement des canaux radiculaires,1986-11-27,1,['11.060.10'],ISO/TC 106/SC 1,9599,,[34965],"
• ISO 6876:200134965,IS,,ISO 6876:2001,Dental root canal sealing materials,Produits dentaires pour le scellement des canaux radiculaires,2001-08-23,2,['11.060.10'],ISO/TC 106/SC 1,9599,[13395],[4
• ISO 6876:201245117,IS,,ISO 6876:2012,Dentistry — Root canal sealing materials,Médecine bucco-dentaire — Matériaux de scellement des canaux radiculaires,2012-05-31,3,['11.060.10'],ISO/TC 106/SC
• ISO 6877:199513397,IS,,ISO 6877:1995,Dental root-canal obturating points,Cônes d'obturation dentaires pour canaux radiculaires,1995-06-01,1,['11.060.10'],ISO/TC 106/SC 1,9599,,[37110],"['en','f
• ISO 6877:200637110,IS,,ISO 6877:2006,Dentistry — Root-canal obturating points,Art dentaire — Cônes d'obturation dentaires pour canaux radiculaires,2006-03-22,2,['11.060.10'],ISO/TC 106/SC 1,959
• ISO 6877:202172350,IS,,ISO 6877:2021,Dentistry — Endodontic obturating materials,Médecine bucco-dentaire — Matériaux d’obturation endodontique,2021-09-08,3,['11.060.10'],ISO/TC 106/SC 1,9599,[3
• ISO 6878-1:198613398,IS,,ISO 6878-1:1986,Water quality — Determination of phosphorus — Part 1: Ammonium molybdate spectrometric method,Qualité de l'eau — Dosage du phosphore — Partie 1: Dosage sp
• ISO 6878:199828635,IS,,ISO 6878:1998,Water quality — Spectrometric determination of phosphorus using ammonium molybdate,Qualité de l'eau — Dosage spectrométrique du phosphore en utilisant le mo
• ISO 6879:198313400,IS,,ISO 6879:1983,Air quality — Performance characteristics and related concepts for air quality measuring methods,Qualité de l'air — Caractéristiques de fonctionnement et co
• ISO 6879:199513401,IS,,ISO 6879:1995,Air quality — Performance characteristics and related concepts for air quality measuring methods,Qualité de l'air — Caractéristiques de fonctionnement et co
• ISO 6883:198713404,IS,,ISO 6883:1987,Animal and vegetable fats and oils — Determination of mass per unit volume ('litre weight') in air,Corps gras d'origines animale et végétale — Détermination
• ISO 6883:199513405,IS,,ISO 6883:1995,Animal and vegetable fats and oils — Determination of conventional mass per volume ('litre weight in air'),Corps gras d'origines animale et végétale — Déter
• ISO 6883:1995/Cor 1:199627445,IS,Cor,ISO 6883:1995/Cor 1:1996,Animal and vegetable fats and oils — Determination of conventional mass per volume ('litre weight in air') — Technical Corrigendum 1,Corps gra
• ISO 6883:200033447,IS,,ISO 6883:2000,Animal and vegetable fats and oils — Determination of conventional mass per volume ('litre weight in air'),Corps gras d'origines animale et végétale — Déter
• ISO 6883:200744029,IS,,ISO 6883:2007,Animal and vegetable fats and oils — Determination of conventional mass per volume (litre weight in air),Corps gras d'origines animale et végétale — Détermi
• ISO 6884:198513406,IS,,ISO 6884:1985,Animal and vegetable fats and oils — Determination of ash,Corps gras d'origines animale et végétale — Détermination des cendres,1985-12-12,1,['67.200.10'],I
• ISO 6885:198813407,IS,,ISO 6885:1988,Animal and vegetable fats and oils — Determination of anisidine value,Corps gras d'origines animale et végétale — Détermination de l'indice d'anisidine,1988
• ISO 6885:199822126,IS,,ISO 6885:1998,Animal and vegetable fats and oils — Determination of anisidine value,Corps gras d'origines animale et végétale — Détermination de l'indice d'anisidine,1998
• ISO 6885:200640052,IS,,ISO 6885:2006,Animal and vegetable fats and oils — Determination of anisidine value,Corps gras d'origines animale et végétale — Détermination de l'indice d'anisidine,2006
• ISO 6886:199613408,IS,,ISO 6886:1996,Animal and vegetable fats and oils — Determination of oxidation stability (Accelerated oxidation test),Corps gras d'origines animale et végétale — Détermina
• ISO 6886:200641434,IS,,ISO 6886:2006,Animal and vegetable fats and oils — Determination of oxidative stability (accelerated oxidation test),Corps gras d'origines animale et végétale — Détermina
• ISO 6887-1:199926850,IS,,ISO 6887-1:1999,"Microbiology of food and animal feeding stuffs — Preparation of test samples, initial suspension and decimal dilutions for microbiological examination —
• ISO 6887-2:200329866,IS,,ISO 6887-2:2003,"Microbiology of food and animal feeding stuffs — Preparation of test samples, initial suspension and decimal dilutions for microbiological examination —
• ISO 6887-3:200331589,IS,,ISO 6887-3:2003,"Microbiology of food and animal feeding stuffs — Preparation of test samples, initial suspension and decimal dilutions for microbiological examination —
• ISO 6887-4:200331590,IS,,ISO 6887-4:2003,"Microbiology of food and animal feeding stuffs — Preparation of test samples, initial suspension and decimal dilutions for microbiological examination —
• ISO 6887-4:2003/Amd 1:201152262,IS,Amd,ISO 6887-4:2003/Amd 1:2011,"Microbiology of food and animal feeding stuffs — Preparation of test samples, initial suspension and decimal dilutions for microbiological
• ISO 6887-4:2003/Cor 1:200441178,IS,Cor,ISO 6887-4:2003/Cor 1:2004,"Microbiology of food and animal feeding stuffs — Preparation of test samples, initial suspension and decimal dilutions for microbiological
• ISO 6887-5:201050306,IS,,ISO 6887-5:2010,"Microbiology of food and animal feeding stuffs — Preparation of test samples, initial suspension and decimal dilutions for microbiological examination —
• ISO 6887:198313409,IS,,ISO 6887:1983,Microbiology — General guidance for the preparation of dilutions for microbiological examination,Microbiologie — Directives générales pour la préparation de
• ISO 6888-1:199923036,IS,,ISO 6888-1:1999,Microbiology of food and animal feeding stuffs — Horizontal method for the enumeration of coagulase-positive staphylococci (Staphylococcus aureus and othe
• ISO 6888-1:1999/Amd 1:200336145,IS,Amd,ISO 6888-1:1999/Amd 1:2003,Microbiology of food and animal feeding stuffs — Horizontal method for the enumeration of coagulase-positive staphylococci (Staphylococcus a
• ISO 6888-1:1999/Amd 2:201864947,IS,Amd,ISO 6888-1:1999/Amd 2:2018,Microbiology of food and animal feeding stuffs — Horizontal method for the enumeration of coagulase-positive staphylococci (Staphylococcus a
• ISO 6888-2:199925571,IS,,ISO 6888-2:1999,Microbiology of food and animal feeding stuffs — Horizontal method for the enumeration of coagulase-positive staphylococci (Staphylococcus aureus and othe
• ISO 6888-2:1999/Amd 1:200335898,IS,Amd,ISO 6888-2:1999/Amd 1:2003,Microbiology of food and animal feeding stuffs — Horizontal method for the enumeration of coagulase-positive staphylococci (Staphylococcus a
• ISO 6888:198313410,IS,,ISO 6888:1983,Microbiology — General guidance for enumeration of Staphylococcus aureus — Colony count technique,Microbiologie — Directives générales pour le dénombrement
• ISO 6889:198213411,IS,,ISO 6889:1982,Surface active agents — Determination of interfacial tension by drawing up liquid films,Agents de surface — Détermination de la tension interfaciale par éti
• ISO 6892-1:200951081,IS,,ISO 6892-1:2009,Metallic materials — Tensile testing — Part 1: Method of test at room temperature,Matériaux métalliques — Essai de traction — Partie 1: Méthode d'essai à
• ISO 6892-1:201661856,IS,,ISO 6892-1:2016,Metallic materials — Tensile testing — Part 1: Method of test at room temperature,Matériaux métalliques — Essai de traction — Partie 1: Méthode d'essai à
• ISO 6892-2:201142610,IS,,ISO 6892-2:2011,Metallic materials — Tensile testing — Part 2: Method of test at elevated temperature,Matériaux métalliques — Essai de traction — Partie 2: Méthode d'essa
• ISO 6892-2:201872571,IS,,ISO 6892-2:2018,Metallic materials — Tensile testing — Part 2: Method of test at elevated temperature,Matériaux métalliques — Essai de traction — Partie 2: Méthode d'essa
• ISO 6892:198413414,IS,,ISO 6892:1984,Metallic materials — Tensile testing,Matériaux métalliques — Essai de traction,1984-07-01,1,['77.040.10'],ISO/TC 164/SC 1,9599,"[3732,5380,3739,3736,4400,44
• ISO 6892:19982472,IS,,ISO 6892:1998,Metallic materials — Tensile testing at ambient temperature,Matériaux métalliques — Essai de traction à température ambiante,1998-03-05,2,['77.040.10'],ISO/T
• ISO 6894:198413415,IS,,ISO 6894:1984,Rubber compounding ingredients — Carbon black — Preparation of samples for determination of dibutylphthalate absorption number (compressed sample),Ingrédien
• ISO 6894:199113416,IS,,ISO 6894:1991,Rubber compounding ingredients — Carbon black — Preparation of samples for determination of dibutylphthalate absorption number (compressed sample),Ingrédien
• ISO 6906:198413425,IS,,ISO 6906:1984,"Vernier callipers reading to 0,02 mm",Pieds à coulisse à vernier au 1/50 mm,1984-04-01,1,['17.040.30'],ISO/TC 213,9599,,"[42799,42801]","['en','fr']",5
• ISO 6907:198413426,IS,,ISO 6907:1984,Rubber footwear — Vulcanized resin rubber and vulcanized hard rubber soling materials — Specification,Articles chaussants en caoutchouc — Matériaux de semel
• ISO 6914:198513430,IS,,ISO 6914:1985,"Rubber, vulcanized — Determination of ageing characteristics by measurement of stress at a given elongation",Caoutchouc vulcanisé — Détermination des carac
• ISO 6914:200436906,IS,,ISO 6914:2004,"Rubber, vulcanized or thermoplastic — Determination of ageing characteristics by measurement of stress relaxation",Caoutchouc vulcanisé ou thermoplastique
• ISO 6914:200850749,IS,,ISO 6914:2008,"Rubber, vulcanized or thermoplastic — Determination of ageing characteristics by measurement of stress relaxation in tension",Caoutchouc vulcanisé ou therm
• ISO 6914:201361760,IS,,ISO 6914:2013,"Rubber, vulcanized or thermoplastic — Determination of ageing characteristics by measurement of stress relaxation in tension",Caoutchouc vulcanisé ou therm
• ISO 6915:198413432,IS,,ISO 6915:1984,"Polymeric materials, cellular flexible — Polyurethane foam for laminate use — Specification",Matériaux polymères alvéolaires souples — Mousse de polyurétha
• ISO 6915:199113433,IS,,ISO 6915:1991,Flexible cellular polymeric materials — Polyurethane foam for laminate use — Specification,Matériaux polymères alvéolaires souples — Mousse de polyuréthanne
• ISO 6916-2:200113435,IS,,ISO 6916-2:2001,Flexible cellular polymeric materials — Sponge and expanded cellular rubber products — Specification — Part 2: Mouldings and extrusions,Polymères alvéolai
• ISO 6926:199013443,IS,,ISO 6926:1990,Acoustics — Determination of sound power levels of noise sources — Requirements for the performance and calibration of reference sound sources,Acoustique —
• ISO 6926:199924013,IS,,ISO 6926:1999,Acoustics — Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels,Acoustique — Prescr
• ISO 6927:198113444,IS,,ISO 6927:1981,Building construction — Jointing products — Sealants — Vocabulary,Construction immobilière — Produits pour joints — Mastics — Vocabulaire,1981-08-01,1,"['01
• ISO 6927:201250093,IS,,ISO 6927:2012,Buildings and civil engineering works — Sealants — Vocabulary,Bâtiments et ouvrages de génie civil — Mastics — Vocabulaire,2012-07-03,2,"['01.040.91','91.10
• ISO 6929:198713446,IS,,ISO 6929:1987,Steel products — Definitions and classification,Produits en acier — Définition et classification,1987-10-08,1,"['01.040.77','77.140.01']",ISO/TC 17,9599,,[5
• ISO 6930-1:200125858,IS,,ISO 6930-1:2001,High yield strength steel plates and wide flats for cold forming — Part 1: Delivery conditions for thermomechanically-rolled steels,Tôles et larges-plats
• ISO 6930-2:200428688,IS,,ISO 6930-2:2004,"High yield strength steel plates and wide flats for cold forming — Part 2: Delivery condition for normalized, normalized rolled and as-rolled steels","Tô
• ISO 6930:198313447,IS,,ISO 6930:1983,High yield strength flat steel products for cold forming,Produits plats en acier à haute limite d'élasticité pour formage à froid,1983-09-01,1,['77.140.50']
• ISO 6931-1:198913448,IS,,ISO 6931-1:1989,Stainless steels for springs — Part 1: Wire,Aciers inoxydables pour ressorts — Partie 1: Fil,1989-07-06,1,['77.140.25'],ISO/TC 17/SC 4,9599,,[13449],"['en
• ISO 6931-1:199413449,IS,,ISO 6931-1:1994,Stainless steels for springs — Part 1: Wire,Aciers inoxydables pour ressorts — Partie 1: Fils,1994-06-23,2,['77.140.25'],ISO/TC 17/SC 4,9599,[13448],[6712
• ISO 6931-2:198913450,IS,,ISO 6931-2:1989,Stainless steels for springs — Part 2: Strip,Aciers inoxydables pour ressorts — Partie 2: Bandes,1989-07-06,1,['77.140.25'],ISO/TC 17/SC 4,9599,,[36212],"
• ISO 6932:198613451,IS,,ISO 6932:1986,"Cold-reduced carbon steel strip with a maximum carbon content of 0,25 %","Feuillards en acier au carbone laminés à froid avec teneur maximale en carbone ég
• ISO 6932:200127963,IS,,ISO 6932:2001,"Cold-reduced carbon steel strip with a maximum carbon content of 0,25 %","Feuillards en acier au carbone laminés à froid avec teneur maximale en carbone ég
• ISO 6932:200845027,IS,,ISO 6932:2008,"Cold-reduced carbon steel strip with a maximum carbon content of 0,25 %","Feuillards en acier au carbone laminés à froid avec une teneur maximale en carbon
• ISO 6934-2:199113454,IS,,ISO 6934-2:1991,Steel for the prestressing of concrete — Part 2: Cold-drawn wire,Acier pour armatures de précontrainte — Partie 2: Fil tréfilé à froid,1991-07-11,1,"['91.
• ISO 6934-4:199113456,IS,,ISO 6934-4:1991,Steel for the prestressing of concrete — Part 4: Strand,Acier pour armatures de précontrainte — Partie 4: Torons,1991-12-12,1,"['91.080.40','77.140.15']",
• ISO 6934-4:1991/Cor 1:199220805,IS,Cor,ISO 6934-4:1991/Cor 1:1992,Steel for the prestressing of concrete — Part 4: Strand — Technical Corrigendum 1,Acier pour armatures de précontrainte — Partie 4: Torons —
• ISO 6934-4:1991/Cor 2:200033812,IS,Cor,ISO 6934-4:1991/Cor 2:2000,Steel for the prestressing of concrete — Part 4: Strand — Technical Corrigendum 2,Acier pour armatures de précontrainte — Partie 4: Torons —
• ISO 6934-5:199113457,IS,,ISO 6934-5:1991,Steel for the prestressing of concrete — Part 5: Hot-rolled steel bars with or without subsequent processing,Acier pour armatures de précontrainte — Parti
• ISO 6935-1:199113459,IS,,ISO 6935-1:1991,Steel for the reinforcement of concrete — Part 1: Plain bars,Acier à béton pour armatures passives — Partie 1: Barres lisses,1991-06-20,1,"['91.080.40','7
• ISO 6935-2:199113460,IS,,ISO 6935-2:1991,Steel for the reinforcement of concrete — Part 2: Ribbed bars,Acier à béton pour armatures passives — Partie 2: Barres nervurées,1991-08-29,1,"['91.080.40
• ISO 6935-2:200738619,IS,,ISO 6935-2:2007,Steel for the reinforcement of concrete — Part 2: Ribbed bars,Aciers pour l'armature du béton — Partie 2: Barres à verrous,2007-01-10,2,"['91.080.40','77.
• ISO 6935-2:201557860,IS,,ISO 6935-2:2015,Steel for the reinforcement of concrete — Part 2: Ribbed bars,Aciers pour l'armature du béton — Partie 2: Barres à verrous,2015-12-07,3,"['91.080.40','77.
• ISO 6935-3:199213461,IS,,ISO 6935-3:1992,Steel for the reinforcement of concrete — Part 3: Welded fabric,Aciers à béton pour armatures passives — Partie 3: Treillis soudés,1992-11-25,1,"['91.080.
• ISO 6935-3:1992/Cor 1:200033813,IS,Cor,ISO 6935-3:1992/Cor 1:2000,Steel for the reinforcement of concrete — Part 3: Welded fabric — Technical Corrigendum 1,Aciers à béton pour armatures passives — Partie 3:
• ISO 6936:198313462,IS,,ISO 6936:1983,Information processing — Conversion between the two coded character sets of ISO 646 and ISO 6937-2 and the CCITT international telegraph alphabet No. 2 (ITA
• ISO 6937-1:198313466,IS,,ISO 6937-1:1983,Information processing — Coded character sets for text communication — Part 1: General introduction,Traitement de l'information — Jeux de caractères codés
• ISO 6937-2:198313467,IS,,ISO 6937-2:1983,Information processing — Coded character sets for text communication — Part 2: Latin alphabetic and non-alphabetic graphic characters,Traitement de l'info
• ISO 6937-2:1983/Add 1:198913468,IS,Add,ISO 6937-2:1983/Add 1:1989,Information processing — Coded character sets for text communication — Part 2: Latin alphabetic and non-alphabetic graphic characters — Adde
• ISO 6938:198413476,IS,,ISO 6938:1984,Textiles — Natural fibres — Generic names and definitions,Textiles — Fibres naturelles — Noms génériques et définitions,1984-03-01,1,"['01.040.59','59.060.1
• ISO 6939:198213477,IS,,ISO 6939:1982,Textiles — Yarns from packages — Method of test for breaking strength of yarn — Skein method,Textiles — Fils sur enroulements — Détermination de la résistan
• ISO 6940:198413479,IS,,ISO 6940:1984,Textile fabrics — Burning behaviour — Determination of ease of ignition of vertically oriented specimens,Textiles — Comportement au feu — Détermination de l
• ISO 6940:1984/Amd 1:199313481,IS,Amd,ISO 6940:1984/Amd 1:1993,Textile fabrics — Burning behaviour — Determination of ease of ignition of vertically oriented specimens — Amendment 1,Textiles — Comportement
• ISO 6940:200435665,IS,,ISO 6940:2004,Textile fabrics — Burning behaviour — Determination of ease of ignition of vertically oriented specimens,Textiles — Comportement au feu — Détermination de l
• ISO 6941:198413482,IS,,ISO 6941:1984,Textile fabrics — Burning behaviour — Measurement of flame spread properties of vertically oriented specimens,Textiles — Comportement au feu — Détermination
• ISO 6941:1984/Amd 1:199213484,IS,Amd,ISO 6941:1984/Amd 1:1992,Textile fabrics — Burning behaviour — Measurement of flame spread properties of vertically oriented specimens — Amendment 1,Textiles — Comport
• ISO 6941:200335667,IS,,ISO 6941:2003,Textile fabrics — Burning behaviour — Measurement of flame spread properties of vertically oriented specimens,Textiles — Comportement au feu — Détermination
• ISO 6942:198113485,IS,,ISO 6942:1981,Clothing for protection against heat and fire — Method of evaluation of thermal behaviour of materials and material assemblies when exposed to a source of r
• ISO 6942:199313486,IS,,ISO 6942:1993,Clothing for protection against heat and fire — Evaluation of thermal behaviour of materials and material assemblies when exposed to a source of radiant hea
• ISO 6942:200226327,IS,,ISO 6942:2002,Protective clothing — Protection against heat and fire — Method of test: Evaluation of materials and material assemblies when exposed to a source of radiant
• ISO 6943:198413487,IS,,ISO 6943:1984,"Rubber, vulcanized — Determination of tension fatigue",Caoutchouc vulcanisé — Détermination de la fatigue en traction,1984-12-01,1,['83.060'],ISO/TC 45/SC
• ISO 6943:200741626,IS,,ISO 6943:2007,"Rubber, vulcanized — Determination of tension fatigue",Caoutchouc vulcanisé — Détermination de la fatigue en traction,2007-06-14,2,['83.060'],ISO/TC 45/SC
• ISO 6943:201157740,IS,,ISO 6943:2011,"Rubber, vulcanized — Determination of tension fatigue",Caoutchouc vulcanisé — Détermination de la fatigue en traction,2011-09-30,3,['83.060'],ISO/TC 45/SC
• ISO 6944-1:200850385,IS,,ISO 6944-1:2008,Fire containment — Elements of building construction — Part 1: Ventilation ducts,Endiguement du feu — Éléments de construction — Partie 1: Conduits de ven
• ISO 6944-1:2008/Amd 1:201563038,IS,Amd,ISO 6944-1:2008/Amd 1:2015,Fire containment — Elements of building construction — Part 1: Ventilation ducts — Amendment 1,Endiguement du feu — Éléments de construction
• ISO 6944:198513488,IS,,ISO 6944:1985,Fire resistance tests — Ventilation ducts,Essais de résistance au feu — Conduits de ventilation,1985-12-19,1,"['91.140.30','13.220.50']",ISO/TC 92/SC 2,9599
• ISO 6945:198313489,IS,,ISO 6945:1983,Rubber hoses — Determination of abrasion resistance of the outer cover,Tuyaux en caoutchouc — Détermination de la résistance à l'abrasion du revêtement,1983
• ISO 6945:199113490,IS,,ISO 6945:1991,Rubber hoses — Determination of abrasion resistance of the outer cover,Tuyaux en caoutchouc — Détermination de la résistance à l'abrasion du revêtement exté
• ISO 6945:1991/Amd 1:199829091,IS,Amd,ISO 6945:1991/Amd 1:1998,Rubber hoses — Determination of abrasion resistance of the outer cover — Amendment 1,Tuyaux en caoutchouc — Détermination de la résistance à l
• ISO 6946-1:198613491,IS,,ISO 6946-1:1986,Thermal insulation — Calculation methods — Part 1: Steady state thermal properties of building components and building elements,Isolation thermique — Règl
• ISO 6946:199618244,IS,,ISO 6946:1996,Building components and building elements — Thermal resistance and thermal transmittance — Calculation method,Composants et parois de bâtiments — Résistance
• ISO 6946:1996/Amd 1:200332959,IS,Amd,ISO 6946:1996/Amd 1:2003,Building components and building elements — Thermal resistance and thermal transmittance — Calculation method — Amendment 1,Composants et paro
• ISO 6946:200740968,IS,,ISO 6946:2007,Building components and building elements — Thermal resistance and thermal transmittance — Calculation method,Composants et parois de bâtiments — Résistance
• ISO 6947:198013493,IS,,ISO 6947:1980,Fundamental welding positions — Definitions and values of angles of slope and rotation for straight welds for these positions,Positions fondamentales d'exéc
• ISO 6947:199013494,IS,,ISO 6947:1990,Welds — Working positions — Definitions of angles of slope and rotation,Soudures — Positions de travail — Définitions des angles d'inclinaison et de rotatio
• ISO 6947:201138133,IS,,ISO 6947:2011,Welding and allied processes — Welding positions,Soudage et techniques connexes — Positions de soudage,2011-05-05,3,['25.160.40'],ISO/TC 44/SC 7,9599,[13494
• ISO 6948:198113495,IS,,ISO 6948:1981,Automatic steam traps — Production and performance characteristic tests,Purgeurs automatiques de vapeur d'eau — Essais de production et essais des caractéri
• ISO 6952:198913499,IS,,ISO 6952:1989,Fluid power systems and components — Two-pin electrical plug connector with earth contact — Characteristics and requirements,Transmissions hydrauliques et p
• ISO 6953-1:199013500,IS,,ISO 6953-1:1990,Pneumatic fluid power — Air line pressure regulators — Part 1: Main characteristics to be included in commercial literature and specific requirements,Tran
• ISO 6953-1:200021626,IS,,ISO 6953-1:2000,Pneumatic fluid power — Compressed air pressure regulators and filter-regulators — Part 1: Main characteristics to be included in literature from supplier
• ISO 6953-1:2000/Cor 1:200644122,IS,Cor,ISO 6953-1:2000/Cor 1:2006,Pneumatic fluid power — Compressed air pressure regulators and filter-regulators — Part 1: Main characteristics to be included in literature
• ISO 6953-1:201559754,IS,,ISO 6953-1:2015,Pneumatic fluid power — Compressed air pressure regulators and filter-regulators — Part 1: Main characteristics to be included in literature from supplier
• ISO 6953-2:200013501,IS,,ISO 6953-2:2000,Pneumatic fluid power — Compressed air pressure regulators and filter-regulators — Part 2: Test methods to determine the main characteristics to be includ
• ISO 6953-2:201559290,IS,,ISO 6953-2:2015,Pneumatic fluid power — Compressed air pressure regulators and filter-regulators — Part 2: Test methods to determine the main characteristics to be includ
• ISO 6954:198413502,IS,,ISO 6954:1984,Mechanical vibration and shock — Guidelines for the overall evaluation of vibration in merchant ships,Vibrations et chocs mécaniques — Principes directeurs
• ISO 6954:200028883,IS,,ISO 6954:2000,"Mechanical vibration — Guidelines for the measurement, reporting and evaluation of vibration with regard to habitability on passenger and merchant ships","
• ISO 6959:198313509,IS,,ISO 6959:1983,"Cross-country ski boots with three pin holes — Dimensions, interface and design","Chaussures de ski de fond avec trois trous d'arrêt — Dimensions, zone de
• ISO 6962:198213512,IS,,ISO 6962:1982,Standard method for testing the long term alpha irradiation stability of solidified high-level radioactive waste forms,Méthode normalisée d'essai de la stab
• ISO 6964:198613514,IS,,ISO 6964:1986,Polyolefin pipes and fittings — Determination of carbon black content by calcination and pyrolysis — Test method and basic specification,Tubes et raccords e
• ISO 6966-2:200534831,IS,,ISO 6966-2:2005,Aircraft ground equipment — Basic requirements — Part 2: Safety requirements,Matériel au sol pour aéronefs — Exigences de base — Partie 2: Exigences de sé
• ISO 6966:19931711,IS,,ISO 6966:1993,Aircraft — Basic requirements for aircraft loading equipment,Aéronefs — Caractéristiques de base du matériel de chargement des aéronefs,1993-12-23,2,"['49.10
• ISO 6967:198313517,IS,,ISO 6967:1983,Aircraft — Wide body aircraft main deck container/pallet loader — Functional requirements,Aéronefs — Chargeur de conteneurs et palettes au pont principal d'
• ISO 6967:199413518,IS,,ISO 6967:1994,Aircraft — Wide body aircraft main deck container/pallet loader — Functional requirements,Aéronefs — Chargeurs de conteneurs et palettes au pont principal d
• ISO 6968:198313519,IS,,ISO 6968:1983,Aircraft — Wide body aircraft lower deck container/pallet loader — Functional requirements,Aéronefs — Chargeur de conteneurs et palettes en soutes inférieur
• ISO 6968:199413520,IS,,ISO 6968:1994,Aircraft — Wide body aircraft lower deck container/pallet loader — Functional requirements,Aéronefs — Chargeurs de conteneurs et palettes en soutes inférieu
• ISO 6969:198113521,IS,,ISO 6969:1981,Road vehicles — Sound signalling devices — Tests after mounting on vehicle,Véhicules routiers — Avertisseurs sonores — Essais après montage sur le véhicule,
• ISO 6969:199926248,IS,,ISO 6969:1999,Road vehicles — Sound signalling devices — Tests after mounting on vehicle,Véhicules routiers — Avertisseurs sonores — Essais après montage sur le véhicule,
• ISO 6971:198213524,IS,,ISO 6971:1982,Welded steel type cranked link drag chains and chain wheels,"Chaînes racleuses en acier, de type soudé, à maillons coudés, et roues dentées pour chaînes",19
• ISO 6972:198213525,IS,,ISO 6972:1982,Welded steel type cranked link mill chains and chain wheels,"Chaînes à maillons coudés en acier, de type soudé, et roues dentées pour chaînes",1982-12-01,1,
• ISO 6974-1:200023702,IS,,ISO 6974-1:2000,Natural gas — Determination of composition with defined uncertainty by gas chromatography — Part 1: Guidelines for tailored analysis,Gaz naturel — Détermi
• ISO 6974-2:200125853,IS,,ISO 6974-2:2001,Natural gas — Determination of composition with defined uncertainty by gas chromatography — Part 2: Measuring-system characteristics and statistics for pr
• ISO 6974-3:200025854,IS,,ISO 6974-3:2000,"Natural gas — Determination of composition with defined uncertainty by gas chromatography — Part 3: Determination of hydrogen, helium, oxygen, nitrogen,
• ISO 6974-5:200025856,IS,,ISO 6974-5:2000,"Natural gas — Determination of composition with defined uncertainty by gas chromatography — Part 5: Determination of nitrogen, carbon dioxide and C1 to C
• ISO 6974:198413527,IS,,ISO 6974:1984,"Natural gas — Determination of hydrogen, inert gases and hydrocarbons up to C8 — Gas chromatographic method","Gaz naturel — Détermination de l'hydrogène, d
• ISO 6975:198613528,IS,,ISO 6975:1986,Natural gas — Determination of hydrocarbons from butane (C4) to hexadecane (C16) — Gas chromatographic method,Gaz naturel — Détermination des hydrocarbures
• ISO 6976:198313530,IS,,ISO 6976:1983,"Natural gas — Calculation of calorific value, density and relative density","Gaz naturel — Calcul du pouvoir calorifique, de la masse volumique et de la de
• ISO 6976:199513531,IS,,ISO 6976:1995,"Natural gas — Calculation of calorific values, density, relative density and Wobbe index from composition","Gaz naturel — Calcul du pouvoir calorifique, de
• ISO 6976:1995/Cor 1:199728970,IS,Cor,ISO 6976:1995/Cor 1:1997,"Natural gas — Calculation of calorific values, density, relative density and Wobbe index from composition — Technical Corrigendum 1: (Applies
• ISO 6976:1995/Cor 2:199729716,IS,Cor,ISO 6976:1995/Cor 2:1997,"Natural gas — Calculation of calorific values, density, relative density and Wobbe index from composition — Technical Corrigendum 2","Gaz nat
• ISO 6976:1995/Cor 3:199932385,IS,Cor,ISO 6976:1995/Cor 3:1999,"Natural gas — Calculation of calorific values, density, relative density and Wobbe index from composition — Technical Corrigendum 3","Gaz nat
• ISO 6978-2:2003/Cor 1:200441509,IS,Cor,ISO 6978-2:2003/Cor 1:2004,Natural gas — Determination of mercury — Part 2: Sampling of mercury by amalgamation on gold/platinum alloy — Technical Corrigendum 1,Gaz na
• ISO 6978:199213533,IS,,ISO 6978:1992,Natural gas — Determination of mercury,Gaz naturel — Détermination de la teneur en mercure,1992-08-20,1,['75.060'],ISO/TC 193/SC 1,9599,,"[38600,38601]","['
• ISO 6980-1:200637015,IS,,ISO 6980-1:2006,Nuclear energy — Reference beta-particle radiation — Part 1: Methods of production,Énergie nucléaire — Rayonnement bêta de référence — Partie 1: Méthodes
• ISO 6980-1:202278753,IS,,ISO 6980-1:2022,Nuclear energy — Reference beta-particle radiation — Part 1: Methods of production,Énergie nucléaire — Rayonnement bêta de référence — Partie 1: Méthodes
• ISO 6980-2:200431730,IS,,ISO 6980-2:2004,Nuclear energy — Reference beta-particle radiation — Part 2: Calibration fundamentals related to basic quantities characterizing the radiation field,Énerg
• ISO 6980-2:202278754,IS,,ISO 6980-2:2022,Nuclear energy — Reference beta-particle radiation — Part 2: Calibration fundamentals related to basic quantities characterizing the radiation field,Énerg
• ISO 6980-3:200640868,IS,,ISO 6980-3:2006,Nuclear energy — Reference beta-particle radiation — Part 3: Calibration of area and personal dosemeters and the determination of their response as a func
• ISO 6980-3:202278755,IS,,ISO 6980-3:2022,Nuclear energy — Reference beta-particle radiation — Part 3: Calibration of area and personal dosemeters and the determination of their response as a func
• ISO 6980:198413535,IS,,ISO 6980:1984,Reference beta radiations for calibrating dosemeters and doseratemeters and for determining their response as a function of beta radiation energy,Rayonnemen
• ISO 6980:199620780,IS,,ISO 6980:1996,Reference beta radiations for calibrating dosemeters and dose-rate meters and for determining their response as a function of beta-radiation energy,Rayonnem
• ISO 6981:198213536,IS,,ISO 6981:1982,Hydraulic fluid power — Cylinders — Rod end plain eyes — Mounting dimensions,Transmissions hydrauliques — Vérins — Tenons simples d'extrémité de tige de pis
• ISO 6981:199213537,IS,,ISO 6981:1992,Hydraulic fluid power — Cylinders — Rod end plain eyes — Mounting dimensions,Transmissions hydrauliques — Vérins — Tenons simples d'extrémité de tige de pis
• ISO 6982:198213538,IS,,ISO 6982:1982,Hydraulic fluid power — Cylinders — Rod end spherical eyes — Mounting dimensions,Transmissions hydrauliques — Vérins — Tenons à rotule d'extrémité de tige d
• ISO 6982:199213539,IS,,ISO 6982:1992,Hydraulic fluid power — Cylinders — Rod end spherical eyes — Mounting dimensions,Transmissions hydrauliques — Vérins — Tenons à rotule d'extrémité de tige d
• ISO 6983-1:198213540,IS,,ISO 6983-1:1982,"Numerical control of machines — Program format and definition of address words — Part 1: Data format for positioning, line motion and contouring control
• ISO 6984:198113543,IS,,ISO 6984:1981,Unalloyed steel wires for stranded wire ropes for mine hoisting — Specifications,Fils en acier non allié pour câbles d'extraction toronnés utilisés dans les
• ISO 6984:199013544,IS,,ISO 6984:1990,Round non-alloy steel wires for stranded wire ropes for mine hoisting — Specifications,Fils tréfilés ronds en acier non allié pour câbles d'extraction toron
• ISO 6986:198313546,IS,,ISO 6986:1983,Side and face milling (slotting) cutters with indexable inserts — Dimensions,Fraises trois tailles à plaquettes amovibles — Dimensions,1983-12-01,1,['25.100
• ISO 6987-1:198313547,IS,,ISO 6987-1:1983,"Indexable hardmetal (carbide) inserts with rounded corners, with partly cylindrical fixing hole — Part 1: Dimensions of inserts with 7 degrees normal cle
• ISO 6987-2:199013548,IS,,ISO 6987-2:1990,"Indexable inserts for cutting tools — Hardmetal (carbide) inserts with rounded corners, with partly cylindrical fixing hole — Part 2: Dimensions of inser
• ISO 6987:199829005,IS,,ISO 6987:1998,"Indexable hard material inserts with rounded corners, with partly cylindrical fixing hole — Dimensions",Plaquettes amovibles en matériaux durs avec arrondi
• ISO 6988:198513550,IS,,ISO 6988:1985,Metallic and other non organic coatings — Sulfur dioxide test with general condensation of moisture,Revêtements métalliques et autres revêtements non organi
• ISO 6993:199013555,IS,,ISO 6993:1990,"Buried, high-impact poly(vinyl chloride) (PVC-HI) pipes for the supply of gaseous fuels — Specification",Tubes enterrés en poly(chlorure de vinyle) (PVC) à
• ISO 6993:200130092,IS,,ISO 6993:2001,"Buried, high-impact poly(vinyl chloride) (PVC-HI) pipes for the supply of gaseous fuels — Specifications",Tubes enterrés en poly(chlorure de vinyle) à rési
• ISO 6998:198413560,IS,,ISO 6998:1984,Carbonaceous materials for the production of aluminium — Pitch for electrodes — Determination of coking value,Produits carbonés utilisés pour la production
• ISO 7000:198413562,IS,,ISO 7000:1984,Graphical symbols for use on equipment — Index and synopsis,Symboles graphiques utilisables sur le matériel — Index et tableau synoptique,1984-03-01,1,['01.
• ISO 7000:198913563,IS,,ISO 7000:1989,Graphical symbols for use on equipment — Index and synopsis,Symboles graphiques utilisables sur le matériel — Index et tableau synoptique,1989-11-30,2,['01.
• ISO 7000:200435627,IS,,ISO 7000:2004,Graphical symbols for use on equipment — Index and synopsis,Symboles graphiques utilisables sur le matériel — Index et tableau synoptique,2004-01-12,3,['01.
• ISO 7000:201260898,IS,,ISO 7000:2012,Graphical symbols for use on equipment — Registered symbols,Symboles graphiques utilisables sur le matériel — Symboles enregistrés,2012-01-25,4,['01.080.20'
• ISO 7000:201465977,IS,,ISO 7000:2014,Graphical symbols for use on equipment — Registered symbols,Symboles graphiques utilisables sur le matériel — Symboles enregistrés,2014-01-20,5,['01.080.20'
• ISO 7001:198013564,IS,,ISO 7001:1980,Public information symbols,Symboles destinés à l'information du public,1980-10-01,1,['01.080.10'],ISO/TC 145,9599,,[13565],"['en','fr']",16
• ISO 7001:199013565,IS,,ISO 7001:1990,Public information symbols,Symboles destinés à l'information du public,1990-02-15,2,['01.080.10'],ISO/TC 145/SC 1,9599,[13564],"[35199,41081]","['en','fr']"
• ISO 7001:1990/Amd 1:199313568,IS,Amd,ISO 7001:1990/Amd 1:1993,Public information symbols — Amendment 1,Symboles destinés à l'information du public — Amendement 1,1993-06-17,2,['01.080.10'],ISO/TC 145/SC 1
• ISO 7001:200741081,IS,,ISO 7001:2007,Graphical symbols — Public information symbols,Symboles graphiques — Symboles destinés à l'information du public,2007-11-01,3,['01.080.10'],ISO/TC 145/SC 1,
• ISO 7001:2007/Amd 1:201363487,IS,Amd,ISO 7001:2007/Amd 1:2013,Graphical symbols — Public information symbols — Amendment 1,Symboles graphiques — Symboles destinés à l'information du public — Amendement 1,
• ISO 7001:2007/Amd 1:2013/Cor 1:201466218,IS,Cor,ISO 7001:2007/Amd 1:2013/Cor 1:2014,Graphical symbols — Public information symbols — Amendment 1 — Technical Corrigendum 1,Symboles graphiques — Symboles destinés à l'
• ISO 7001:2007/Amd 2:201567047,IS,Amd,ISO 7001:2007/Amd 2:2015,Graphical symbols — Public information symbols — Amendment 2,Symboles graphiques — Symboles destinés à l'information du public — Amendement 2,
• ISO 7001:2007/Amd 3:201671012,IS,Amd,ISO 7001:2007/Amd 3:2016,Graphical symbols — Public information symbols — Amendment 3,Symboles graphiques — Symboles destinés à l'information du public — Amendement 3,
• ISO 7001:2007/Amd 4:201772251,IS,Amd,ISO 7001:2007/Amd 4:2017,Graphical symbols — Public information symbols — Amendment 4,Symboles graphiques — Symboles destinés à l'information du public — Amendement 4,
• ISO 7004:198713571,IS,,ISO 7004:1987,Photography — Industrial radiographic film — Determination of ISO speed and average gradient when exposed to X- and gamma-radiation,Photographie — Film pour
• ISO 7005-1:199213573,IS,,ISO 7005-1:1992,Metallic flanges — Part 1: Steel flanges,Brides métalliques — Partie 1: Brides en acier,1992-04-09,1,['23.040.60'],ISO/TC 5/SC 10,9599,"[6873,7353,7034]",
• ISO 7010:200331019,IS,,ISO 7010:2003,Graphical symbols — Safety colours and safety signs — Safety signs used in workplaces and public areas,Symboles graphiques — Couleurs de sécurité et signaux
• ISO 7010:2003/Amd 1:200644007,IS,Amd,ISO 7010:2003/Amd 1:2006,Graphical symbols — Safety colours and safety signs — Safety signs used in workplaces and public areas — Amendment 1,Symboles graphiques — Cou
• ISO 7010:2003/Amd 2:200746346,IS,Amd,ISO 7010:2003/Amd 2:2007,Graphical symbols — Safety colours and safety signs — Safety signs used in workplaces and public areas — Amendment 2,Symboles graphiques — Cou
• ISO 7010:2003/Amd 3:200750686,IS,Amd,ISO 7010:2003/Amd 3:2007,Graphical symbols — Safety colours and safety signs — Safety signs used in workplaces and public areas — Amendment 3,Symboles graphiques — Cou
• ISO 7010:2003/Amd 4:200953703,IS,Amd,ISO 7010:2003/Amd 4:2009,Graphical symbols — Safety colours and safety signs — Safety signs used in workplaces and public areas — Amendment 4,Symboles graphiques — Cou
• ISO 7010:2003/Amd 5:201056442,IS,Amd,ISO 7010:2003/Amd 5:2010,Graphical symbols — Safety colours and safety signs — Safety signs used in workplaces and public areas — Amendment 5,Symboles graphiques — Cou
• ISO 7010:2003/Amd 6:201057072,IS,Amd,ISO 7010:2003/Amd 6:2010,Graphical symbols — Safety colours and safety signs — Safety signs used in workplaces and public areas — Amendment 6,Symboles graphiques — Cou
• ISO 7010:2003/Amd 7:201057792,IS,Amd,ISO 7010:2003/Amd 7:2010,Graphical symbols — Safety colours and safety signs — Safety signs used in workplaces and public areas — Amendment 7,Symboles graphiques — Cou
• ISO 7010:2003/Amd 8:201157994,IS,Amd,ISO 7010:2003/Amd 8:2011,Graphical symbols — Safety colours and safety signs — Safety signs used in workplaces and public areas — Amendment 8,Symboles graphiques — Cou
• ISO 7010:201154432,IS,,ISO 7010:2011,Graphical symbols — Safety colours and safety signs — Registered safety signs,Symboles graphiques — Couleurs de sécurité et signaux de sécurité — Signaux de
• ISO 7010:2011/Amd 1:201257446,IS,Amd,ISO 7010:2011/Amd 1:2012,Graphical symbols — Safety colours and safety signs — Registered safety signs — Amendment 1,Symboles graphiques — Couleurs de sécurité et sign
• ISO 7010:2011/Amd 2:201262280,IS,Amd,ISO 7010:2011/Amd 2:2012,Graphical symbols — Safety colours and safety signs — Registered safety signs — Amendment 2,Symboles graphiques — Couleurs de sécurité et sign
• ISO 7010:2011/Amd 3:201262668,IS,Amd,ISO 7010:2011/Amd 3:2012,Graphical symbols — Safety colours and safety signs — Registered safety signs — Amendment 3,Symboles graphiques — Couleurs de sécurité et sign
• ISO 7010:2011/Amd 4:201363655,IS,Amd,ISO 7010:2011/Amd 4:2013,Graphical symbols — Safety colours and safety signs — Registered safety signs — Amendment 4,Symboles graphiques — Couleurs de sécurité et sign
• ISO 7010:2011/Amd 5:201465374,IS,Amd,ISO 7010:2011/Amd 5:2014,Graphical symbols — Safety colours and safety signs — Registered safety signs — Amendment 5,Symboles graphiques — Couleurs de sécurité et sign
• ISO 7010:2011/Amd 6:201467147,IS,Amd,ISO 7010:2011/Amd 6:2014,Graphical symbols — Safety colours and safety signs — Registered safety signs — Amendment 6,Symboles graphiques — Couleurs de sécurité et sign
• ISO 7010:2011/Amd 7:201671288,IS,Amd,ISO 7010:2011/Amd 7:2016,Graphical symbols — Safety colours and safety signs — Registered safety signs — Amendment 7,Symboles graphiques — Couleurs de sécurité et sign
• ISO 7010:2011/Amd 8:201774359,IS,Amd,ISO 7010:2011/Amd 8:2017,Graphical symbols — Safety colours and safety signs — Registered safety signs — Amendment 8,Symboles graphiques — Couleurs de sécurité et sign
• ISO 7010:2011/Amd 9:201877293,IS,Amd,ISO 7010:2011/Amd 9:2018,Graphical symbols — Safety colours and safety signs — Registered safety signs — Amendment 9,Symboles graphiques — Couleurs de sécurité et sign
• ISO 7026:198113583,IS,,ISO 7026:1981,"Road vehicles — Screw-in injection nozzle holder types 20 and 21 for pintle nozzle size 'S', type 'B'","Véhicules routiers — Porte-injecteur vissé, types 2
• ISO 7026:199013584,IS,,ISO 7026:1990,"Road vehicles — Screw-in injection nozzle holders, types 20, 21 and 27 for pintle nozzle size 'S', type 'B'","Véhicules routiers — Porte-injecteurs vissés,
• ISO 7027:198413585,IS,,ISO 7027:1984,Water quality — Determination of turbidity,Qualité de l'eau — Détermination de la turbidité,1984-07-01,1,['13.060.60'],ISO/TC 147/SC 2,9599,,[13586],"['en',
• ISO 7027:199013586,IS,,ISO 7027:1990,Water quality — Determination of turbidity,Qualité de l'eau — Détermination de la turbidité,1990-04-12,2,['13.060.60'],ISO/TC 147/SC 2,9599,[13585],[30123],
• ISO 7027:199930123,IS,,ISO 7027:1999,Water quality — Determination of turbidity,Qualité de l'eau — Détermination de la turbidité,1999-12-16,3,['13.060.60'],ISO/TC 147/SC 2,9599,[13586],"[62801,
• ISO 7029:198413588,IS,,ISO 7029:1984,Acoustics — Threshold of hearing by air conduction as a function of age and sex for otologically normal persons,Acoustique — Seuil normal d'audition par con
• ISO 7029:200026314,IS,,ISO 7029:2000,Acoustics — Statistical distribution of hearing thresholds as a function of age,Acoustique — Distribution statistique des seuils d'audition en fonction de l
• ISO 7030:198113589,IS,,ISO 7030:1981,"Road vehicles — Screw-mounted injection nozzle holder, types 12, 13, 14, 15, 16, 17, 18 and 19","Véhicules routiers — Porte-injecteurs vissés, types 12, 13
• ISO 7033:198713593,IS,,ISO 7033:1987,Fine and coarse aggregates for concrete — Determination of the particle mass-per-volume and water absorption — Pycnometer method,Granulats fins et gros pour
• ISO 7040:198313599,IS,,ISO 7040:1983,"Prevailing torque type hexagon nuts (with non-metallic insert), style 1 — Property classes 5, 8 and 10","Écrous hexagonaux à freinage interne, à couple pré
• ISO 7040:199713600,IS,,ISO 7040:1997,"Prevailing torque type hexagon nuts (with non-metallic insert), style 1 — Property classes 5, 8 and 10","Écrous hexagonaux autofreinés (à anneau non métall
• ISO 7040:201261363,IS,,ISO 7040:2012,"Prevailing torque type hexagon regular nuts (with non-metallic insert) — Property classes 5, 8 and 10","Écrous hexagonaux normaux autofreinés (à anneau non
• ISO 7041:198313601,IS,,ISO 7041:1983,"Prevailing torque type hexagon nuts (with non-metallic insert), style 2 — Property classes 9 and 12","Écrous hexagonaux à freinage interne, à couple préala
• ISO 7041:199713602,IS,,ISO 7041:1997,"Prevailing torque type hexagon nuts (with non-metallic insert), style 2 — Property classes 9 and 12","Écrous hexagonaux autofreinés (à anneau non métalliqu
• ISO 7041:200237203,IS,,ISO 7041:2002,"Prevailing torque type hexagon nuts (with non-metallic insert), style 2 — Property classes 9 and 12","Écrous hexagonaux autofreinés (à anneau non métalliqu
• ISO 7041:201261364,IS,,ISO 7041:2012,"Prevailing torque type hexagon nuts (with non-metallic insert), style 2 — Property classes 9 and 12","Écrous hexagonaux autofreinés (à anneau non métalliqu
• ISO 7042:198313603,IS,,ISO 7042:1983,"Prevailing torque type all-metal hexagon nuts, style 2 — Property classes 5, 8, 10 and 12","Écrous hexagonaux à freinage interne, à couple préalable (tout
• ISO 7042:199713604,IS,,ISO 7042:1997,"Prevailing torque type all-metal hexagon nuts, style 2 — Property classes 5, 8, 10 and 12","Écrous hexagonaux autofreinés tout métal, style 2 — Classes de
• ISO 7042:201261366,IS,,ISO 7042:2012,"Prevailing torque type all-metal hexagon high nuts — Property classes 5, 8, 10 and 12","Écrous hexagonaux hauts autofreinés tout métal — Classes de qualité
• ISO 7043:198313605,IS,,ISO 7043:1983,Prevailing torque type hexagon nuts with flange (with non-metallic insert),"Écrous hexagonaux à embase cylindro-tronconique, à freinage interne, à couple pr
• ISO 7043:199724306,IS,,ISO 7043:1997,Prevailing torque type hexagon nuts with flange (with non-metallic insert) — Product grades A and B,"Écrous hexagonaux à embase, autofreinés (à anneau non m
• ISO 7044:198313606,IS,,ISO 7044:1983,Prevailing torque type all-metal hexagon nuts with flange,"Écrous hexagonaux à embase cylindro-tronconique, à freinage interne, à couple préalable, tout mét
• ISO 7044:199724307,IS,,ISO 7044:1997,Prevailing torque type all-metal hexagon nuts with flange — Product grades A and B,"Écrous hexagonaux à embase, autofreinés, tout métal — Grades A et B",199
• ISO 7045:198313607,IS,,ISO 7045:1983,Cross-recessed pan head screws — Product grade A,Vis à métaux à tête cylindrique bombée large à empreinte cruciforme — Grade A,1983-07-01,1,['21.060.10'],IS
• ISO 7045:199413608,IS,,ISO 7045:1994,Pan head screws with type H or type Z cross recess — Product grade A,Vis à métaux à tête cylindrique bombée large à empreinte cruciforme de type H ou de typ
• ISO 7046-1:199413611,IS,,ISO 7046-1:1994,Countersunk flat head screws (common head style) with type H or type Z cross recess — Product grade A — Part 1: Steel of property class 4.8,Vis à métaux à
• ISO 7046-2:199013612,IS,,ISO 7046-2:1990,"Cross-recessed countersunk flat head screws (common head style) — Grade A — Part 2: Steel of property class 8.8, stainless steel and non-ferrous metals",
• ISO 7047:198313613,IS,,ISO 7047:1983,Cross-recessed raised countersunk head screws (common head style) — Product grade A,Vis à métaux à tête fraisée bombée à empreinte cruciforme — Grade A,1983
• ISO 7047:199413614,IS,,ISO 7047:1994,Countersunk raised head screws (common head style) with type H or type Z cross recess — Product grade A,Vis à métaux à tête fraisée bombée à empreinte cruci
• ISO 7048:199813615,IS,,ISO 7048:1998,Cross recessed cheese head screws,Vis à métaux à tête cylindrique à empreinte cruciforme,1998-06-11,1,['21.060.10'],ISO/TC 2/SC 11,9599,,[56452],"['en','fr'
• ISO 7049:198313616,IS,,ISO 7049:1983,Cross recessed pan head tapping screws,Vis à tôle à tête cylindrique bombée large à empreinte cruciforme,1983-07-01,1,['21.060.10'],ISO/TC 2/SC 13,9599,,[54
• ISO 7050:198313617,IS,,ISO 7050:1983,Cross recessed countersunk (flat) head tapping screws (common head style),Vis à tôle à tête fraisée à empreinte cruciforme,1983-09-01,1,['21.060.10'],ISO/TC
• ISO 7051:198313618,IS,,ISO 7051:1983,Cross recessed raised countersunk (oval) head tapping screws,Vis à tôle à tête fraisée bombée à empreinte cruciforme,1983-09-01,1,['21.060.10'],ISO/TC 2/SC
• ISO 7053:199213620,IS,,ISO 7053:1992,Hexagon washer head tapping screws,Vis à tôle à tête hexagonale à embase plate,1992-04-23,1,['21.060.10'],ISO/TC 2/SC 13,9599,,[54049],"['en','fr']",4
• ISO 7053:201154049,IS,,ISO 7053:2011,Hexagon washer head tapping screws,Vis à tôle à tête hexagonale à embase plate,2011-07-21,2,['21.060.10'],ISO/TC 2/SC 13,9599,[13620],[73632],"['en','fr']",
• ISO 7059:198213625,IS,,ISO 7059:1982,Caprolactam for industrial use — Determination of absorbance at a wavelength of 290 nm,Caprolactame à usage industriel — Détermination de l'absorbance à la
• ISO 7061:199313628,IS,,ISO 7061:1993,Shipbuilding — Aluminium shore gangways for seagoing vessels,Construction navale — Planchons en aluminium pour navires de haute mer,1993-05-06,2,['47.040'],
• ISO 7061:201561453,IS,,ISO 7061:2015,Ships and marine technology — Aluminium shore gangways for seagoing vessels,Navires et technologie maritime — Planchons en aluminium pour navires de haute m
• ISO 7063:198213630,IS,,ISO 7063:1982,Needle roller bearings — Track rollers — Tolerances,Roulements à aiguilles — Galets de came — Tolérances,1982-07-01,1,['21.100.20'],ISO/TC 4/SC 5,9599,,[302
• ISO 7063:200330240,IS,,ISO 7063:2003,Rolling bearings — Needle roller bearing track rollers — Boundary dimensions and tolerances,"Roulements — Roulements à aiguilles, galets de came — Dimension
• ISO 7064:198313631,IS,,ISO 7064:1983,Data processing — Check character systems,Traitement des données — Systèmes de caractères de contrôle,1983-09-01,1,['35.030'],ISO/IEC JTC 1/SC 32,9599,,[315
• ISO 7065-1:198213632,IS,,ISO 7065-1:1982,"Information processing — Data interchange on 200 mm (8 in) flexible disk cartridge using modified frequency modulation recording at 13 262 ftprad on two
• ISO 7066-1:198913635,IS,,ISO 7066-1:1989,Assessment of uncertainty in the calibration and use of flow measurement devices — Part 1: Linear calibration relationships,Évaluation de l'incertitude da
• ISO 7072:198213643,IS,,ISO 7072:1982,Agricultural wheeled tractors — Three-point-linkage — Linch pins — Dimensions,Tracteurs agricoles à roues — Attelages trois points — Goupilles d'attelage —
• ISO 7076-6:201663735,IS,,ISO 7076-6:2016,Fire protection — Foam fire extinguishing systems — Part 6: Vehicle mounted compressed air foam systems,Protection contre l'incendie — Systèmes d'extincti
• ISO 7076-6:2016/Amd 1:202077521,IS,Amd,ISO 7076-6:2016/Amd 1:2020,Fire protection — Foam fire extinguishing systems — Part 6: Vehicle mounted compressed air foam systems — Amendment 1,Protection contre l'in
• ISO 7078:198513650,IS,,ISO 7078:1985,"Building construction — Procedures for setting out, measurement and surveying — Vocabulary and guidance notes","Construction immobilière — Procédés pour l'
• ISO 7079:198113651,IS,,ISO 7079:1981,Core drills with parallel shanks and with Morse taper shanks,Forets-aléseurs à queue cylindrique et à queue cône Morse,1981-10-01,1,['25.100.30'],ISO/TC 29/
• ISO 7083:198313655,IS,,ISO 7083:1983,Technical drawings — Symbols for geometrical tolerancing — Proportions and dimensions,Dessins techniques — Symboles pour tolérancement géométrique — Proport
• ISO 7085:199913658,IS,,ISO 7085:1999,Mechanical and performance requirements of case hardened and tempered metric thread rolling screws,"Caractéristiques mécaniques et fonctionnelles des vis au
• ISO 7086-1:198213661,IS,,ISO 7086-1:1982,Glassware and glass ceramic ware in contact with food — Release of lead and cadmium — Part 1: Method of test,Articles en verre et en vitro céramique en co
• ISO 7086-1:200027146,IS,,ISO 7086-1:2000,Glass hollowware in contact with food — Release of lead and cadmium — Part 1: Test method,Vaisselle creuse en verre en contact avec les aliments — Émissio
• ISO 7086-2:198213662,IS,,ISO 7086-2:1982,Glassware and glass ceramic ware in contact with food — Release of lead and cadmium — Part 2: Permissible limits,Articles en verre et en vitro céramique e
• ISO 7089:198313665,IS,,ISO 7089:1983,Plain washers — Normal series — Product grade A,Rondelles plates — Série normale — Grade A,1983-09-01,1,['21.060.30'],ISO/TC 2,9599,,[13666],"['en','fr']",3
• ISO 7090:198313668,IS,,ISO 7090:1983,"Plain washers, chamfered — Normal series — Product grade A","Rondelles plates, chanfreinées — Série normale — Grade A",1983-09-01,1,['21.060.30'],ISO/TC 2,
• ISO 7091:198313671,IS,,ISO 7091:1983,Plain washers — Normal series — Product grade C,Rondelles plates — Série normale — Grade C,1983-09-01,1,['21.060.30'],ISO/TC 2,9599,,[13672],"['en','fr']",3
• ISO 7092:198313673,IS,,ISO 7092:1983,Plain washers — Small series — Product grade A,Rondelles plates — Série étroite — Grade A,1983-09-01,1,['21.060.30'],ISO/TC 2,9599,,[13674],"['en','fr']",3
• ISO 7093:198313676,IS,,ISO 7093:1983,Plain washers — Large series — Product grades A and C,Rondelles plates — Série large — Grades A et C,1983-09-01,1,['21.060.30'],ISO/TC 2,9599,,"[28315,13677
• ISO 7094:198313678,IS,,ISO 7094:1983,Plain washers — Extra large series — Product grade C,Rondelles plates — Série très large — Grade C,1983-08-01,1,['21.060.30'],ISO/TC 2,9599,,[26413],"['en',
• ISO 7095:198213679,IS,,ISO 7095:1982,Earth-moving machinery — Crawler tractors and crawler loaders — Operator's controls,Engins de terrassement — Tracteurs à chenilles et chargeuses à chenilles
• ISO 7096:198213680,IS,,ISO 7096:1982,Earth-moving machinery — Operator seat — Transmitted vibration,Engins de terrassement — Siège de l'opérateur — Vibrations transmises,1982-02-01,1,"['53.100'
• ISO 7096:199422028,IS,,ISO 7096:1994,Earth-moving machinery — Laboratory evaluation of operator seat vibration,Engins de terrassement — Évaluation en laboratoire des vibrations du siège de l'op
• ISO 7096:200025592,IS,,ISO 7096:2000,Earth-moving machinery — Laboratory evaluation of operator seat vibration,Engins de terrassement — Évaluation en laboratoire des vibrations transmises à l'o
• ISO 7097-1:200434540,IS,,ISO 7097-1:2004,"Nuclear fuel technology — Determination of uranium in solutions, uranium hexafluoride and solids — Part 1: Iron(II) reduction/potassium dichromate oxidat
• ISO 7097-2:200434541,IS,,ISO 7097-2:2004,"Nuclear fuel technology — Determination of uranium in solutions, uranium hexafluoride and solids — Part 2: Iron(II) reduction/cerium(IV) oxidation titrim
• ISO 7097:198313681,IS,,ISO 7097:1983,Determination of uranium in reactor fuel solutions and in uranium product solutions — Iron (II) sulfate reduction/potassium dichromate oxidation titrimetric
• ISO 7098:198213682,IS,,ISO 7098:1982,Documentation — Romanization of Chinese,Documentation — Romanisation du chinois,1982-08-01,1,['01.140.10'],ISO/TC 46,9599,,[13683],['en'],5
• ISO 7098:199113683,IS,,ISO 7098:1991,Information and documentation — Romanization of Chinese,Information et documentation — Romanisation du chinois,1991-12-19,2,['01.140.10'],ISO/TC 46,9599,[
• ISO 7111:198713696,IS,,ISO 7111:1987,Plastics — Thermogravimetry of polymers — Temperature scanning method,Plastiques — Thermogravimétrie des polymères — Méthode par examen de la température,19
• ISO 7112:198213697,IS,,ISO 7112:1982,Machinery for forestry — Portable brush saws — Vocabulary,Machines forestières — Débroussailleuses portatives — Vocabulaire,1982-09-01,1,"['65.060.80','01.0
• ISO 7112:199925069,IS,,ISO 7112:1999,Machinery for forestry — Portable hand-held brush-cutters and grass-trimmers — Vocabulary,Matériel forestier — Débroussailleuses et coupe-herbe portatifs —
• ISO 7112:200843392,IS,,ISO 7112:2008,Machinery for forestry — Portable brush-cutters and grass-trimmers — Vocabulary,Matériel forestier — Débroussailleuses et coupe-herbe portatifs — Vocabulair
• ISO 7112:201769738,IS,,ISO 7112:2017,Machinery for forestry — Portable brush-cutters and grass-trimmers — Vocabulary,Matériel forestier — Débroussailleuses et coupe-herbe portatifs — Vocabulair
• ISO 7113:198213698,IS,,ISO 7113:1982,Machinery for forestry — Brush saws — Saw blades — Dimensions and peripheral speed,Matériel forestier — Débroussailleuses — Lames de scie — Dimensions et vi
• ISO 7113:199113699,IS,,ISO 7113:1991,Forestry machinery — Portable brush-saws — Saw blades,Matériel forestier — Débroussailleuses portatives — Lames de scies,1991-11-07,2,['65.060.80'],ISO/TC 2
• ISO 7116:198113702,IS,,ISO 7116:1981,Road vehicles — Measurement method for the maximum speed of mopeds,Véhicules routiers — Méthode de mesurage de la vitesse maximale des cyclomoteurs,1981-07-
• ISO 7116:19951914,IS,,ISO 7116:1995,Mopeds — Measurement of maximum speed,Cyclomoteurs — Mesurage de la vitesse maximale,1995-02-23,2,['43.140'],ISO/TC 22,9599,[13702],[45397],"['en','fr']",5
• ISO 7117:198113703,IS,,ISO 7117:1981,Road vehicles — Measurement method for the maximum speed of motorcycles,Véhicules routiers — Méthode de mesurage de la vitesse maximale des motocycles,1981-
• ISO 7117:19951860,IS,,ISO 7117:1995,Motorcycles — Measurement of maximum speed,Motocycles — Mesurage de la vitesse maximale,1995-02-23,2,['43.140'],ISO/TC 22,9599,[13703],[50631],"['en','fr']",
• ISO 7121:198613707,IS,,ISO 7121:1986,Flanged steel ball valves,"Robinets à tournant sphérique en acier, à brides",1986-04-24,1,['23.060.20'],ISO/TC 153,9599,,[43496],"['en','fr']",9
• ISO 7121:200643496,IS,,ISO 7121:2006,Steel ball valves for general-purpose industrial applications,Robinets en acier à tournant sphérique pour les applications industrielles générales,2006-05-1
• ISO 7129:198213713,IS,,ISO 7129:1982,"Earth-moving machinery — Tractors with dozer, graders, tractor scrapers — Cutting edges — Principal shapes and basic dimensions","Engins de terrassement —
• ISO 7129:198913714,IS,,ISO 7129:1989,"Earth-moving machinery — Tractors with dozer, graders, tractor scrapers — Cutting edges — Principal shapes and basic dimensions","Engins de terrassement —
• ISO 7130:198113715,IS,,ISO 7130:1981,Earth-moving machinery — Guide to procedure for operator training,Engins de terrassement — Directives pour la procédure de formation du conducteur,1981-12-0
• ISO 7131:198413716,IS,,ISO 7131:1984,Earth-moving machinery — Loaders — Terminology and commercial specifications,Engins de terrassement — Chargeuses — Terminologie et spécifications commercial
• ISO 7131:19972117,IS,,ISO 7131:1997,Earth-moving machinery — Loaders — Terminology and commercial specifications,Engins de terrassement — Chargeuses — Terminologie et spécifications commerciale
• ISO 7131:1997/Amd 1:200333374,IS,Amd,ISO 7131:1997/Amd 1:2003,Earth-moving machinery — Loaders — Terminology and commercial specifications — Amendment 1,Engins de terrassement — Chargeuses — Terminologie
• ISO 7132:198413717,IS,,ISO 7132:1984,Earth-moving machinery — Dumpers — Terminology and commercial specifications,Engins de terrassement — Tombereaux — Terminologie et spécifications commercial
• ISO 7132:1984/Amd 1:198513719,IS,Amd,ISO 7132:1984/Amd 1:1985,Earth-moving machinery — Dumpers — Terminology and commercial specifications — Amendment 1,Engins de terrassement — Tombereaux — Terminologie
• ISO 7132:199013718,IS,,ISO 7132:1990,Earth-moving machinery — Dumpers — Terminology and commercial specifications,Engins de terrassement — Tombereaux — Terminologie et spécifications commercial
• ISO 7133:198513720,IS,,ISO 7133:1985,Earth-moving machinery — Tractor-scrapers — Terminology and commercial specifications,Engins de terrassement — Décapeuses — Terminologie et spécifications c
• ISO 7133:1985/Amd 1:199322197,IS,Amd,ISO 7133:1985/Amd 1:1993,Earth-moving machinery — Tractor-scrapers — Terminology and commercial specifications — Amendment 1,Engins de terrassement — Décapeuses — Term
• ISO 7133:199413721,IS,,ISO 7133:1994,Earth-moving machinery — Tractor-scrapers — Terminology and commercial specifications,Engins de terrassement — Décapeuses — Terminologie et spécifications c
• ISO 7134:198513722,IS,,ISO 7134:1985,Earth-moving machinery — Graders — Terminology and commercial specifications,Engins de terrassement — Niveleuses — Terminologie et spécifications commercial
• ISO 7134:199313723,IS,,ISO 7134:1993,Earth-moving machinery — Graders — Terminology and commercial specifications,Engins de terrassement — Niveleuses — Terminologie et spécifications commercial
• ISO 7134:1993/Cor 1:199627219,IS,Cor,ISO 7134:1993/Cor 1:1996,Earth-moving machinery — Graders — Terminology and commercial specifications — Technical Corrigendum 1,Engins de terrassement — Niveleuses — T
• ISO 7135:199313724,IS,,ISO 7135:1993,Earth-moving machinery — Hydraulic excavators — Terminology and commercial specifications,Engins de terrassement — Pelles hydrauliques — Terminologie et spé
• ISO 7136:198613725,IS,,ISO 7136:1986,Earth-moving machinery — Pipelayers — Terminology and commercial specifications,Engins de terrassement — Tracteurs poseurs de canalisations — Terminologie e
• ISO 7136:199820171,IS,,ISO 7136:1998,Earth-moving machinery — Pipelayers — Definitions and commercial specifications,Engins de terrassement — Tracteurs poseurs de canalisations — Définitions et
• ISO 7137:198113726,IS,,ISO 7137:1981,Aircraft — Environmental conditions and test procedures for airborne equipment,Aéronautique — Conditions d'environnement et procédures d'essai pour les équi
• ISO 7137:198713727,IS,,ISO 7137:1987,Aircraft — Environmental conditions and test procedures for airborne equipment,Aéronautique — Conditions d'environnement et procédures d'essai pour les équi
• ISO 7137:199213728,IS,,ISO 7137:1992,Aircraft — Environmental conditions and test procedures for airborne equipment,Aéronefs — Conditions d'environnement et procédures d'essai pour les équipeme
• ISO 7138:198413729,IS,,ISO 7138:1984,Cross-country skis — Determination of mass and location of balance point,Skis de fond — Détermination de la masse et de l'emplacement du point d'équilibre,1
• ISO 7139:198413730,IS,,ISO 7139:1984,Cross-country skis — Determination of elastic properties,Skis de fond — Détermination des caractéristiques élastiques,1984-11-01,1,['97.220.20'],ISO/TC 83/S
• ISO 7141:198113732,IS,,ISO 7141:1981,Road vehicles — Wheels — Impact test procedure,Véhicules routiers — Roues — Méthode d'essai de choc,1981-10-01,1,['43.040.50'],ISO/TC 22,9599,,"[20560,13733
• ISO 7141:1981/Cor 1:199220560,IS,Cor,ISO 7141:1981/Cor 1:1992,Road vehicles — Wheels — Impact test procedure — Technical Corrigendum 1,Véhicules routiers — Roues — Méthode d'essai de choc — Rectificatif t
• ISO 7141:199513733,IS,,ISO 7141:1995,Passenger cars — Light alloy wheels — Impact test,Voitures particulières — Roues en alliage léger — Essai de choc,1995-11-16,2,['43.040.50'],ISO/TC 22,9599,
• ISO 7141:200539422,IS,,ISO 7141:2005,Road vehicles — Light alloy wheels — Impact test,Véhicules routiers — Roues en alliage léger — Essai de choc,2005-07-04,3,['43.040.50'],ISO/TC 22/SC 33,9599
• ISO 7142:198413734,IS,,ISO 7142:1984,Binders for paints and varnishes — Epoxy resins — General methods of test,Liants pour peintures et vernis — Résines époxydiques — Méthodes générales d'essai
• ISO 7142:200744642,IS,,ISO 7142:2007,Binders for paints and varnishes — Epoxy resins — General methods of test,Liants pour peintures et vernis — Résines époxydiques — Méthodes générales d'essai
• ISO 7143:198213735,IS,,ISO 7143:1982,Binders for paints and varnishes — Aqueous dispersions of polymers and copolymers — General methods of test,Liants pour peintures et vernis — Dispersions aq
• ISO 7143:200026995,IS,,ISO 7143:2000,Binders for paints and varnishes — Methods of test for characterizing water-based coating materials and binders,Liants pour peintures et vernis — Méthodes d
• ISO 7146-1:200836100,IS,,ISO 7146-1:2008,Plain bearings — Appearance and characterization of damage to metallic hydrodynamic bearings — Part 1: General,Paliers lisses — Aspect et caractérisation
• ISO 7146-2:200840940,IS,,ISO 7146-2:2008,Plain bearings — Appearance and characterization of damage to metallic hydrodynamic bearings — Part 2: Cavitation erosion and its countermeasures,Paliers
• ISO 7146:199313738,IS,,ISO 7146:1993,"Plain bearings — Terms, characteristics and causes of damage and changes in appearance","Paliers lisses — Termes, caractéristiques et causes de détériorati
• ISO 7148-1:198513740,IS,,ISO 7148-1:1985,Plain bearings — Testing of the tribological behaviour of bearing materials — Part 1: Testing of the friction and wear behaviour of bearing material/matin
• ISO 7148-1:199924713,IS,,ISO 7148-1:1999,Plain bearings — Testing of the tribological behaviour of bearing materials — Part 1: Testing of bearing metals,Paliers lisses — Essai du comportement tri
• ISO 7148-1:201253709,IS,,ISO 7148-1:2012,Plain bearings — Testing of the tribological behaviour of bearing materials — Part 1: Testing of bearing metals,Paliers lisses — Essai du comportement tri
• ISO 7148-2:199920994,IS,,ISO 7148-2:1999,Plain bearings — Testing of the tribological behaviour of bearing materials — Part 2: Testing of polymer-based bearing materials,Paliers lisses — Essai du
• ISO 7148-2:201253710,IS,,ISO 7148-2:2012,Plain bearings — Testing of the tribological behaviour of bearing materials — Part 2: Testing of polymer-based bearing materials,Paliers lisses — Essai du
• ISO 7151:198313744,IS,,ISO 7151:1983,Instruments for surgery — Haemostatic forceps — Requirements,Instruments chirurgicaux — Pinces hémostatiques — Exigences,1983-11-01,1,['11.040.30'],ISO/TC 1
• ISO 7151:198813745,IS,,ISO 7151:1988,"Surgical instruments — Non-cutting, articulated instruments — General requirements and test methods","Instruments chirurgicaux — Instruments articulés, non
• ISO 7152:198413746,IS,,ISO 7152:1984,Camping tents — Nomenclature,Tentes de camping — Nomenclature,1984-08-01,1,"['97.200.30','01.040.97']",ISO/TC 83,9599,,[13747],"['en','fr','ru']",31
• ISO 7152:199713747,IS,,ISO 7152:1997,Camping tents and caravan awnings — Vocabulary and list of equivalent terms,Tentes de camping et auvents de caravane — Vocabulaire et liste de termes équiva
• ISO 7152:1997/Amd 1:200638589,IS,Amd,ISO 7152:1997/Amd 1:2006,Camping tents and caravan awnings — Vocabulary and list of equivalent terms — Amendment 1,Tentes de camping et auvents de caravane — Vocabulai
• ISO 7153-1:198313748,IS,,ISO 7153-1:1983,Instruments for surgery — Metallic materials — Part 1: Stainless steel,Instruments chirurgicaux — Matériaux métalliques — Partie 1: Acier inoxydable,1983-
• ISO 7153-1:199113749,IS,,ISO 7153-1:1991,Surgical instruments — Metallic materials — Part 1: Stainless steel,Instruments chirurgicaux — Matériaux métalliques — Partie 1: Acier inoxydable,1991-03-
• ISO 7153-1:1991/Amd 1:199923266,IS,Amd,ISO 7153-1:1991/Amd 1:1999,Surgical instruments — Metallic materials — Part 1: Stainless steel — Amendment 1,Instruments chirurgicaux — Matériaux métalliques — Partie
• ISO 7162:199213758,IS,,ISO 7162:1992,Performance standards in building — Contents and format of standards for evaluation of performance,Normes de performance dans le bâtiment — Contenu et forma
• ISO 7165:199913762,IS,,ISO 7165:1999,Fire fighting — Portable fire extinguishers — Performance and construction,Lutte contre l'incendie — Extincteurs portatifs — Performances et construction,19
• ISO 7165:1999/Amd 1:200434923,IS,Amd,ISO 7165:1999/Amd 1:2004,Fire fighting — Portable fire extinguishers — Performance and construction — Amendment 1: Class F,Lutte contre l'incendie — Extincteurs portat
• ISO 7165:1999/Amd 2:200437345,IS,Amd,ISO 7165:1999/Amd 2:2004,Fire fighting — Portable fire extinguishers — Performance and construction — Amendment 2,Lutte contre l'incendie — Extincteurs portatifs — Per
• ISO 7165:200944094,IS,,ISO 7165:2009,Fire fighting — Portable fire extinguishers — Performance and construction,Lutte contre l'incendie — Extincteurs portatifs — Performances et construction,20
• ISO 7168:198513765,IS,,ISO 7168:1985,Air quality — Presentation of ambient air quality data in alphanumerical form,Qualité de l'air — Présentation sous forme alphanumérique des données relative
• ISO 7169:198413767,IS,,ISO 7169:1984,Aerospace construction — Separable tube fittings for fluid systems — General specification,Constructions aérospatiales — Raccordements séparables de tubes p
• ISO 7169:199313768,IS,,ISO 7169:1993,Aerospace fluid systems — Separable tube fittings for 24 degrees cone — General specification,Circuits de fluides pour l'aérospatiale — Raccordements sépara
• ISO 7169:19981414,IS,,ISO 7169:1998,"Aerospace — Separable tube fittings for fluid systems, 24 degrees cone — General specification",Aéronautique et espace — Raccordements séparables de tubes à
• ISO 7169:200740006,IS,,ISO 7169:2007,"Aerospace — Separable tube fittings for fluid systems, for 24 degree cones, for pressures up to 3 000 psi or 21 000 kPa — Procurement specification, inch/m
• ISO 7170:199313769,IS,,ISO 7170:1993,Furniture — Storage units — Determination of strength and durability,Ameublement — Éléments de rangement — Détermination de la résistance et de la durabilit
• ISO 7170:200538718,IS,,ISO 7170:2005,Furniture — Storage units — Determination of strength and durability,Ameublement — Éléments de rangement — Détermination de la résistance et de la durabilit
• ISO 7171:198813770,IS,,ISO 7171:1988,Furniture — Storage units — Determination of stability,Ameublement — Éléments de rangement — Détermination de la stabilité,1988-05-26,1,['97.140'],ISO/TC 13
• ISO 7171:201966309,IS,,ISO 7171:2019,Furniture — Storage units — Test methods for the determination of stability,Ameublement — Éléments de rangement — Méthodes d'essai pour la détermination de
• ISO 7172:198813771,IS,,ISO 7172:1988,Furniture — Tables — Determination of stability,Ameublement — Tables — Détermination de la stabilité,1988-05-05,1,['97.140'],ISO/TC 136,9599,,"[62199,55268]
• ISO 7173:198913772,IS,,ISO 7173:1989,Furniture — Chairs and stools — Determination of strength and durability,Ameublement — Chaises et tabourets — Détermination de la résistance et de la durabi
• ISO 7175-1:199713775,IS,,ISO 7175-1:1997,Children's cots and folding cots for domestic use — Part 1: Safety requirements,Lits fixes et lits pliants pour enfants à usage domestique — Partie 1: Exi
• ISO 7175-2:198813776,IS,,ISO 7175-2:1988,Furniture — Children's cots — Safety requirements and testing — Part 2: Test methods,Ameublement — Lits d'enfants — Exigences de sécurité et essais — Part
• ISO 7175-2:199721151,IS,,ISO 7175-2:1997,Children's cots and folding cots for domestic use — Part 2: Test methods,Lits fixes et lits pliants pour enfants à usage domestique — Partie 2: Méthodes d
• ISO 7176-1:198613777,IS,,ISO 7176-1:1986,Wheelchairs — Part 1: Determination of static stability,Fauteuils roulants — Partie 1: Détermination de la stabilité statique,1986-11-13,1,['11.180.10'],I
• ISO 7176-1:199921410,IS,,ISO 7176-1:1999,Wheelchairs — Part 1: Determination of static stability,Fauteuils roulants — Partie 1: Détermination de la stabilité statique,1999-10-14,2,['11.180.10'],I
• ISO 7176-2:199013778,IS,,ISO 7176-2:1990,Wheelchairs — Part 2: Determination of dynamic stability of electric wheelchairs,Fauteuils roulants — Partie 2: Détermination de la stabilité dynamique de
• ISO 7176-2:200134747,IS,,ISO 7176-2:2001,Wheelchairs — Part 2: Determination of dynamic stability of electric wheelchairs,Fauteuils roulants — Partie 2: Détermination de la stabilité dynamique de
• ISO 7176-3:198813779,IS,,ISO 7176-3:1988,Wheelchairs — Part 3: Determination of efficiency of brakes,Fauteuils roulants — Partie 3: Détermination de l'efficacité des freins,1988-11-17,1,['11.180.
• ISO 7176-3:200335100,IS,,ISO 7176-3:2003,Wheelchairs — Part 3: Determination of effectiveness of brakes,Fauteuils roulants — Partie 3: Détermination de l'efficacité des freins,2003-04-28,2,['11.1
• ISO 7176-4:198813780,IS,,ISO 7176-4:1988,Wheelchairs — Part 4: Determination of energy consumption of electric wheelchairs,Fauteuils roulants — Partie 4: Détermination de la consommation d'énergi
• ISO 7176-4:199720336,IS,,ISO 7176-4:1997,Wheelchairs — Part 4: Energy consumption of electric wheelchairs and scooters for determination of theoretical distance range,Fauteuils roulants — Partie
• ISO 7176-5:198613781,IS,,ISO 7176-5:1986,"Wheelchairs — Part 5: Determination of overall dimensions, mass and turning space","Fauteuils roulants — Partie 5: Détermination des dimensions hors tout
• ISO 7176-6:198813782,IS,,ISO 7176-6:1988,"Wheelchairs — Part 6: Determination of maximum speed, acceleration and retardation of electric wheelchairs","Fauteuils roulants — Partie 6: Détermination
• ISO 7176-6:200123015,IS,,ISO 7176-6:2001,"Wheelchairs — Part 6: Determination of maximum speed, acceleration and deceleration of electric wheelchairs","Fauteuils roulants — Partie 6: Déterminatio
• ISO 7176-8:199813784,IS,,ISO 7176-8:1998,"Wheelchairs — Part 8: Requirements and test methods for static, impact and fatigue strengths","Fauteuils roulants — Partie 8: Exigences et méthodes d'ess
• ISO 7176-9:198813785,IS,,ISO 7176-9:1988,Wheelchairs — Part 9: Climatic tests for electric wheelchairs,Fauteuils roulants — Partie 9: Essais climatiques pour fauteuils roulants électriques,1988-1
• ISO 7176-9:200123821,IS,,ISO 7176-9:2001,Wheelchairs — Part 9: Climatic tests for electric wheelchairs,Fauteuils roulants — Partie 9: Essais climatiques pour fauteuils roulants électriques,2001-1
• ISO 7176-10:198813786,IS,,ISO 7176-10:1988,Wheelchairs — Part 10: Determination of obstacle-climbing ability of electric wheelchairs,Fauteuils roulants — Partie 10: Détermination de l'aptitude des
• ISO 7176-11:199213787,IS,,ISO 7176-11:1992,Wheelchairs — Part 11: Test dummies,Fauteuils roulants — Partie 11: Mannequins d'essai,1992-05-14,1,['11.180.10'],ISO/TC 173/SC 1,9599,,"[53056,30076]","
• ISO 7176-14:199713790,IS,,ISO 7176-14:1997,Wheelchairs — Part 14: Power and control systems for electric wheelchairs — Requirements and test methods,Fauteuils roulants — Partie 14: Systèmes d'alim
• ISO 7176-14:200839741,IS,,ISO 7176-14:2008,Wheelchairs — Part 14: Power and control systems for electrically powered wheelchairs and scooters — Requirements and test methods,Fauteuils roulants — P
• ISO 7176-16:199713792,IS,,ISO 7176-16:1997,Wheelchairs — Part 16: Resistance to ignition of upholstered parts — Requirements and test methods,Fauteuils roulants — Partie 16: Résistance à l'inflamm
• ISO 7176-16:201240992,IS,,ISO 7176-16:2012,Wheelchairs — Part 16: Resistance to ignition of postural support devices,Fauteuils roulants — Partie 16: Résistance à l'inflammation des dispositifs de
• ISO 7176-19:200132989,IS,,ISO 7176-19:2001,Wheelchairs — Part 19: Wheeled mobility devices for use in motor vehicles,Fauteuils roulants — Partie 19: Dispositifs de mobilité montés sur roues et des
• ISO 7176-19:200840993,IS,,ISO 7176-19:2008,Wheelchairs — Part 19: Wheeled mobility devices for use as seats in motor vehicles,Fauteuils roulants — Partie 19: Dispositifs de mobilité montés sur rou

← records 8,001–8,400 · All of Withdrawn and superseded ISO standards · records 8,801 on →