Records 8,801–9,200 — Withdrawn and superseded ISO standards

Records 8,801 to 9,200 of 24,640. Each links to its own page, which carries the source URL and the quoted line that states the value.

• ISO 7176-19:2008/Amd 1:201557023,IS,Amd,ISO 7176-19:2008/Amd 1:2015,Wheelchairs — Part 19: Wheeled mobility devices for use as seats in motor vehicles — Amendment 1: Annex G,Fauteuils roulants — Partie 19: D
• ISO 7176-21:200323707,IS,,ISO 7176-21:2003,Wheelchairs — Part 21: Requirements and test methods for electromagnetic compatibility of electrically powered wheelchairs and motorized scooters,Fauteui
• ISO 7176-21:200951048,IS,,ISO 7176-21:2009,"Wheelchairs — Part 21: Requirements and test methods for electromagnetic compatibility of electrically powered wheelchairs and scooters, and battery cha
• ISO 7176-22:200025790,IS,,ISO 7176-22:2000,Wheelchairs — Part 22: Set-up procedures,Fauteuils roulants — Partie 22: Modes opératoires de réglage,2000-05-11,1,['11.180.10'],ISO/TC 173/SC 1,9599,,[6
• ISO 7176-23:200231275,IS,,ISO 7176-23:2002,Wheelchairs — Part 23: Requirements and test methods for attendant-operated stair-climbing devices,Fauteuils roulants — Partie 23: Exigences et méthodes
• ISO 7176-24:200431276,IS,,ISO 7176-24:2004,Wheelchairs — Part 24: Requirements and test methods for user-operated stair-climbing devices,Fauteuils roulants — Partie 24: Exigences et méthodes d'ess
• ISO 7176-25:201354863,IS,,ISO 7176-25:2013,Wheelchairs — Part 25: Batteries and chargers for powered wheelchairs,Fauteuils roulants — Partie 25: Batteries et chargeurs pour fauteuils roulants moto
• ISO 7181:198213795,IS,,ISO 7181:1982,Hydraulic fluid power — Cylinders — Bore and rod area ratios,Transmissions hydrauliques — Vérins — Rapports entre surfaces d'alésage et de tige,1982-11-01,1
• ISO 7181:199113796,IS,,ISO 7181:1991,Hydraulic fluid power — Cylinders — Bore and rod area ratios,Transmissions hydrauliques — Vérins — Rapports entre surfaces d'alésage et de tige,1991-10-10,2
• ISO 7182:198413797,IS,,ISO 7182:1984,Acoustics — Measurement at the operator's position of airborne noise emitted by chain saws,Acoustique — Mesurage au niveau de l'oreille de l'opérateur du br
• ISO 7183-2:199613799,IS,,ISO 7183-2:1996,Compressed air dryers — Part 2: Performance ratings,Sécheurs d'air comprimé — Partie 2: Caractéristiques nominales de fonctionnement,1996-03-07,1,['23.140
• ISO 7183:198613798,IS,,ISO 7183:1986,Compressed air dryers — Specifications and testing,Sécheurs à air comprimé — Spécifications et essais,1986-03-13,1,['23.140'],ISO/TC 118/SC 4,9599,,[39401],
• ISO 7185:198313801,IS,,ISO 7185:1983,Programming languages — PASCAL,Langages de programmation — PASCAL,1983-12-01,1,['35.060'],ISO/IEC JTC 1/SC 22,9599,,[13802],"['en','fr']",1
• ISO 7186:198313803,IS,,ISO 7186:1983,Ductile iron pipes and accessories for non-pressure pipe-lines,Tuyaux et pièces accessoires en fonte ductile pour canalisations sans pression,1983-08-01,1,"
• ISO 7186:19961313,IS,,ISO 7186:1996,Ductile iron products for sewage applications,Produits en fonte ductile pour l'assainissement,1996-12-26,2,"['93.030','77.140.80']",ISO/TC 5/SC 2,9599,[13803
• ISO 7187:198313804,IS,,ISO 7187:1983,Photography — Direct positive colour print camera materials — Determination of ISO speed,Photographie — Surfaces sensibles pour appareils photographiques do
• ISO 7188:198513805,IS,,ISO 7188:1985,Acoustics — Measurement of noise emitted by passenger cars under conditions representative of urban driving,Acoustique — Mesurage du bruit émis par les voit
• ISO 7188:199421249,IS,,ISO 7188:1994,Acoustics — Measurement of noise emitted by passenger cars under conditions representative of urban driving,Acoustique — Mesurage du bruit émis par les voit
• ISO 7194:198313811,IS,,ISO 7194:1983,Measurement of fluid flow in closed conduits — Velocity-area methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by mean
• ISO 7195:199313812,IS,,ISO 7195:1993,Packaging of uranium hexafluoride (UF6) for transport,Emballage de l'hexafluorure d'uranium (UF6) en vue de son transport,1993-10-28,1,['27.120.30'],ISO/TC
• ISO 7195:200531251,IS,,ISO 7195:2005,Nuclear energy — Packaging of uranium hexafluoride (UF6) for transport,Énergie nucléaire — Emballage de l'hexafluorure d'uranium (UF6) en vue de son transpo
• ISO 7197:198913814,IS,,ISO 7197:1989,"Neurosurgical implants — Sterile, single-use hydrocephalus shunts and components","Implants pour neurochirurgie — Systèmes de dérivation et composants stér
• ISO 7197:199713815,IS,,ISO 7197:1997,"Neurosurgical implants — Sterile, single-use hydrocephalus shunts and components","Implants pour neurochirurgie — Systèmes de dérivation et composants stér
• ISO 7197:200638403,IS,,ISO 7197:2006,"Neurosurgical implants — Sterile, single-use hydrocephalus shunts and components","Implants neurochirurgicaux — Systèmes de dérivation et composants stéril
• ISO 7197:2006/Cor 1:200746408,IS,Cor,ISO 7197:2006/Cor 1:2007,"Neurosurgical implants — Sterile, single-use hydrocephalus shunts and components — Technical Corrigendum 1","Implants neurochirurgicaux — Sys
• ISO 7198:199825374,IS,,ISO 7198:1998,Cardiovascular implants — Tubular vascular prostheses,Implants cardiovasculaires — Prothèses vasculaires tubulaires,1998-07-23,1,['11.040.40'],ISO/TC 150/SC
• ISO 7199:199613818,IS,,ISO 7199:1996,Cardiovascular implants and artificial organs — Blood-gas exchangers (oxygenators),Implants cardiovasculaires et organes artificiels — Échangeurs gaz/sang e
• ISO 7199:200951030,IS,,ISO 7199:2009,Cardiovascular implants and artificial organs — Blood-gas exchangers (oxygenators),Implants cardiovasculaires et organes artificiels — Échangeurs gaz/sang e
• ISO 7199:2009/Amd 1:201255930,IS,Amd,ISO 7199:2009/Amd 1:2012,"Cardiovascular implants and artificial organs — Blood-gas exchangers (oxygenators) — Amendment 1: Clarifications for test methodologies, labe
• ISO 7199:201667607,IS,,ISO 7199:2016,Cardiovascular implants and artificial organs — Blood-gas exchangers (oxygenators),Implants cardiovasculaires et organes artificiels — Échangeurs gaz/sang e
• ISO 7199:2016/Amd 1:202074732,IS,Amd,ISO 7199:2016/Amd 1:2020,Cardiovascular implants and artificial organs — Blood-gas exchangers (oxygenators) — Amendment 1: Connectors,Implants cardiovasculaires et org
• ISO 7200:198413819,IS,,ISO 7200:1984,Technical drawings — Title blocks,Dessins techniques — Cartouches d'inscriptions,1984-08-01,1,['01.100.01'],ISO/TC 10/SC 1,9599,,"[1066,30121,30122,35446]",
• ISO 7201:198213820,IS,,ISO 7201:1982,Fire protection — Fire extinguishing media — Halogenated hydrocarbons,Protection contre l'incendie — Agents extincteurs — Hydrocarbures halogénés,1982-09-01
• ISO 7202:198713823,IS,,ISO 7202:1987,Fire protection — Fire extinguishing media — Powder,Protection contre l'incendie — Agents extincteurs — Poudres,1987-06-18,1,['13.220.10'],ISO/TC 21/SC 6,95
• ISO 7202:201252817,IS,,ISO 7202:2012,Fire protection — Fire extinguishing media — Powder,Protection contre l'incendie — Agents extincteurs — Poudres,2012-07-06,2,['13.220.10'],ISO/TC 21/SC 6,95
• ISO 7203-1:199513824,IS,,ISO 7203-1:1995,Fire extinguishing media — Foam concentrates — Part 1: Specification for low expansion foam concentrates for top application to water-immiscible liquids,A
• ISO 7203-1:201151960,IS,,ISO 7203-1:2011,Fire extinguishing media — Foam concentrates — Part 1: Specification for low-expansion foam concentrates for top application to water-immiscible liquids,A
• ISO 7203-2:199513826,IS,,ISO 7203-2:1995,Fire extinguishing media — Foam concentrates — Part 2: Specification for medium and high expansion foam concentrates for top application to water-immiscib
• ISO 7203-2:201152818,IS,,ISO 7203-2:2011,Fire extinguishing media — Foam concentrates — Part 2: Specification for medium- and high-expansion foam concentrates for top application to water-immisci
• ISO 7203-3:199920734,IS,,ISO 7203-3:1999,Fire extinguishing media — Foam concentrates — Part 3: Specification for low expansion foam concentrates for top application to water-miscible liquids,Age
• ISO 7203-3:201152819,IS,,ISO 7203-3:2011,Fire extinguishing media — Foam concentrates — Part 3: Specification for low-expansion foam concentrates for top application to water-miscible liquids,Age
• ISO 7205:198613829,IS,,ISO 7205:1986,Radionuclide gauges — Gauges designed for permanent installation,Jauges à radioéléments — Appareils destinés à être installés à poste fixe,1986-12-18,1,['13
• ISO 7206-1:198513830,IS,,ISO 7206-1:1985,"Implants for surgery — Partial and total hip joint prostheses — Part 1: Classification, designation of dimensions and requirements","Implants chirurgicau
• ISO 7206-1:199520980,IS,,ISO 7206-1:1995,Implants for surgery — Partial and total hip joint prostheses — Part 1: Classification and designation of dimensions,Implants chirurgicaux — Prothèses par
• ISO 7206-2:198713831,IS,,ISO 7206-2:1987,Implants for surgery — Partial and total hip joint prostheses — Part 2: Bearing surfaces made of metallic and plastics materials,Implants chirurgicaux — P
• ISO 7206-2:199613832,IS,,ISO 7206-2:1996,"Implants for surgery — Partial and total hip joint prostheses — Part 2: Articulating surfaces made of metallic, ceramic and plastics materials","Implants
• ISO 7206-4:198913834,IS,,ISO 7206-4:1989,Implants for surgery — Partial and total hip joint prostheses — Part 4: Determination of endurance properties of stemmed femoral components with applicati
• ISO 7206-4:200227441,IS,,ISO 7206-4:2002,Implants for surgery — Partial and total hip joint prostheses — Part 4: Determination of endurance properties of stemmed femoral components,Implants chiru
• ISO 7206-6:199213836,IS,,ISO 7206-6:1992,Implants for surgery — Partial and total hip joint prostheses — Part 6: Determination of endurance properties of head and neck region of stemmed femoral c
• ISO 7206-8:199521009,IS,,ISO 7206-8:1995,Implants for surgery — Partial and total hip joint prostheses — Part 8: Endurance performance of stemmed femoral components with application of torsion,Im
• ISO 7206-10:200331211,IS,,ISO 7206-10:2003,Implants for surgery — Partial and total hip-joint prostheses — Part 10: Determination of resistance to static load of modular femoral heads,Implants chi
• ISO 7206-12:201663710,IS,,ISO 7206-12:2016,Implants for surgery — Partial and total hip joint prostheses — Part 12: Deformation test method for acetabular shells,Implants chirurgicaux — Prothèses
• ISO 7207-1:198513838,IS,,ISO 7207-1:1985,"Implants for surgery — Partial and total knee joint prostheses — Part 1: Classification, definitions and designation of dimensions","Implants chirurgicau
• ISO 7207-1:199420981,IS,,ISO 7207-1:1994,"Implants for surgery — Components for partial and total knee joint prostheses — Part 1: Classification, definitions and designation of dimensions","Impla
• ISO 7207-2:199823255,IS,,ISO 7207-2:1998,"Implants for surgery — Components for partial and total knee joint prostheses — Part 2: Articulating surfaces made of metal, ceramic and plastics materia
• ISO 7207-2:201152683,IS,,ISO 7207-2:2011,"Implants for surgery — Components for partial and total knee joint prostheses — Part 2: Articulating surfaces made of metal, ceramic and plastics materia
• ISO 7207-2:2011/Amd 1:201667928,IS,Amd,ISO 7207-2:2011/Amd 1:2016,"Implants for surgery — Components for partial and total knee joint prostheses — Part 2: Articulating surfaces made of metal, ceramic and pl
• ISO 7207-2:2011/Amd 2:202074552,IS,Amd,ISO 7207-2:2011/Amd 2:2020,"Implants for surgery — Components for partial and total knee joint prostheses — Part 2: Articulating surfaces made of metal, ceramic and pl
• ISO 7208:198413839,IS,,ISO 7208:1984,"Skimmed milk, whey and buttermilk — Determination of fat content — Gravimetric method (Reference method)","Lait écrémé, sérum et babeurre — Détermination d
• ISO 7208:199927798,IS,,ISO 7208:1999,"Skimmed milk, whey and buttermilk — Determination of fat content — Gravimetric method (Reference method)","Lait écrémé, sérum et babeurre — Détermination d
• ISO 7208:200851014,IS,,ISO 7208:2008,"Skimmed milk, whey and buttermilk — Determination of fat content — Gravimetric method (Reference method)","Lait écrémé, sérum et babeurre — Détermination d
• ISO 7210:198313840,IS,,ISO 7210:1983,Smoking machines for tobacco and tobacco products — Non-routine test methods,Machines à fumer pour tabac et produits du tabac — Méthodes d'essais non habitu
• ISO 7210:199722454,IS,,ISO 7210:1997,Routine analytical cigarette-smoking machine — Additional test methods,Machine à fumer analytique de routine pour cigarettes — Méthodes d'essais complémenta
• ISO 7210:201356094,IS,,ISO 7210:2013,Routine analytical cigarette-smoking machine — Additional test methods for machine verification,Machine à fumer analytique de routine pour cigarettes — Méth
• ISO 7211-2:198413842,IS,,ISO 7211-2:1984,Textiles — Woven fabrics — Construction — Methods of analysis — Part 2: Determination of number of threads per unit length,Textiles — Tissus — Constructio
• ISO 7211-5:198413845,IS,,ISO 7211-5:1984,Textiles — Woven fabrics - Construction - Methods of analysis — Part 5: Determination of linear density of yarn removed from fabric,Titre manque — Partie
• ISO 7211-6:198413846,IS,,ISO 7211-6:1984,Textiles — Woven fabrics — Construction — Methods of analysis — Part 6: Determination of the mass of warp and weft per unit area of fabric,Textiles — Tiss
• ISO 7213:198113848,IS,,ISO 7213:1981,Pulps — Sampling for testing,Pâtes — Échantillonnage pour essais,1981-11-01,1,['85.040'],ISO/TC 6,9599,,[83382],"['en','fr']",2
• ISO 7214:198513849,IS,,ISO 7214:1985,Cellular plastics — Polyethylene — Methods of test,Plastiques alvéolaires — Polyéthylène — Méthodes d'essai,1985-01-31,1,['83.100'],ISO/TC 61/SC 10,9599,,[1
• ISO 7214:199813850,IS,,ISO 7214:1998,Cellular plastics — Polyethylene — Methods of test,Plastiques alvéolaires — Polyéthylène — Méthodes d'essai,1998-03-19,2,['83.100'],ISO/TC 61/SC 10,9599,[13
• ISO 7214:200734851,IS,,ISO 7214:2007,Cellular plastics — Polyethylene — Methods of test,Plastiques alvéolaires — Polyéthylène — Méthodes d'essai,2007-06-13,3,['83.100'],ISO/TC 61/SC 10,9599,[13
• ISO 7215:198513851,IS,,ISO 7215:1985,Iron ores — Determination of relative reducibility,Minerais de fer — Détermination de la réductibilité relative,1985-08-01,1,['73.060'],ISO/TC 102/SC 3,9599
• ISO 7215:19951580,IS,,ISO 7215:1995,Iron ores — Determination of relative reducibility,Minerais de fer — Détermination de la réductibilité relative,1995-11-09,2,['73.060.10'],ISO/TC 102/SC 3,95
• ISO 7215:200738074,IS,,ISO 7215:2007,Iron ores for blast furnace feedstocks — Determination of the reducibility by the final degree of reduction index,Minerais de fer pour charges de hauts four
• ISO 7216:199213852,IS,,ISO 7216:1992,Acoustics — Agricultural and forestry wheeled tractors and self-propelled machines — Measurement of noise emitted when in motion,Acoustique — Tracteurs agri
• ISO 7218:198513854,IS,,ISO 7218:1985,Microbiology — General guidance for microbiological examinations,Microbiologie — Directives générales pour les examens microbiologiques,1985-09-12,1,['07.10
• ISO 7218:199613855,IS,,ISO 7218:1996,Microbiology of food and animal feeding stuffs — General rules for microbiological examinations,Microbiologie des aliments — Règles générales pour les exame
• ISO 7218:1996/Amd 1:200129822,IS,Amd,ISO 7218:1996/Amd 1:2001,Microbiology of food and animal feeding stuffs — General rules for microbiological examinations — Amendment 1,Microbiologie des aliments — Règ
• ISO 7218:200736534,IS,,ISO 7218:2007,Microbiology of food and animal feeding stuffs — General requirements and guidance for microbiological examinations,Microbiologie des aliments — Exigences g
• ISO 7218:2007/Amd 1:201352204,IS,Amd,ISO 7218:2007/Amd 1:2013,Microbiology of food and animal feeding stuffs — General requirements and guidance for microbiological examinations — Amendment 1,Microbiologi
• ISO 7225:199413861,IS,,ISO 7225:1994,Gas cylinders — Precautionary labels,Bouteilles à gaz — Étiquettes de risque,1994-10-20,1,['23.020.35'],ISO/TC 58/SC 4,9599,,[33253],"['en','fr']",5
• ISO 7226:198513862,IS,,ISO 7226:1985,Dimensions of hexagonal dienuts,Filières hexagonales de filetage à main,1985-05-16,1,['25.100.50'],ISO/TC 29,9599,,[13863],"['en','fr']",
• ISO 7227:198713864,IS,,ISO 7227:1987,Road vehicles — Lighting and light signalling devices — Vocabulary,Véhicules routiers — Dispositifs d'éclairage et de signalisation lumineuse — Vocabulaire,
• ISO 7228:198113865,IS,,ISO 7228:1981,Tracheal tube connectors,Raccords des tubes trachéaux,1981-10-01,1,['11.040.10'],ISO/TC 121,9599,,"[13867,13866]","['en','fr']",3
• ISO 7228:198513866,IS,,ISO 7228:1985,Tracheal tube connectors,Raccords de tubes trachéaux,1985-06-27,2,['11.040.10'],ISO/TC 121/SC 2,9599,[13865],[13867],"['en','fr']",3
• ISO 7228:199313867,IS,,ISO 7228:1993,Tracheal tube connectors,Raccords de tubes trachéaux,1993-10-14,3,['11.040.10'],ISO/TC 121/SC 2,9599,"[13865,13866]",[24590],"['en','fr']",4
• ISO 7229:199713868,IS,,ISO 7229:1997,Rubber- or plastics-coated fabrics — Measurement of gas permeability,Supports textiles revêtus de caoutchouc ou de plastique — Mesure de la perméabilité aux
• ISO 7229:201565594,IS,,ISO 7229:2015,Rubber- or plastics-coated fabrics — Measurement of gas permeability,Supports textiles revêtus de caoutchouc ou de plastique — Mesure de la perméabilité aux
• ISO 7231:198413870,IS,,ISO 7231:1984,"Polymeric materials, cellular flexible — Method of assessment of air flow value at constant pressure-drop",Matériaux polymères alvéolaires souples — Déterm
• ISO 7231:201043778,IS,,ISO 7231:2010,"Polymeric materials, cellular, flexible — Determination of air flow value at constant pressure-drop",Matériaux polymères alvéolaires souples — Déterminatio
• ISO 7232:198613871,IS,,ISO 7232:1986,"Rubber or plastics footwear — Antistatic sandals, sabots and clogs","Articles chaussants en caoutchouc ou en plastique — Sandales, sabots et soques antista
• ISO 7233:198313872,IS,,ISO 7233:1983,Rubber and plastics hoses and hose assemblies — Vacuum resistance — Methods of test,Tuyaux et flexibles en caoutchouc et en plastique — Résistance au vide —
• ISO 7233:199113873,IS,,ISO 7233:1991,Rubber and plastics hoses and hose assemblies — Determination of suction resistance,Tuyaux et flexibles en caoutchouc et en plastique — Détermination de la
• ISO 7233:200638945,IS,,ISO 7233:2006,Rubber and plastics hoses and hose assemblies — Determination of resistance to vacuum,Tuyaux et flexibles en caoutchouc et en plastique — Détermination de l
• ISO 7233:201668052,IS,,ISO 7233:2016,Rubber and plastics hoses and hose assemblies — Determination of resistance to vacuum,Tuyaux et flexibles en caoutchouc et en plastique — Détermination de l
• ISO 7235:199113876,IS,,ISO 7235:1991,"Acoustics — Measurement procedures for ducted silencers — Insertion loss, flow noise and total pressure loss","Acoustique — Méthodes de mesurage pour silen
• ISO 7236:199113877,IS,,ISO 7236:1991,Inland navigation vessels — Demountable signal masts for push-tows — Mounting attachment,Bateaux de navigation intérieure — Mâts de signalisation amovibles
• ISO 7237:198113880,IS,,ISO 7237:1981,Road vehicles — Masses and dimensions of caravans — Terms and definitions,Véhicules routiers — Masses et dimensions des caravanes — Dénominations et définit
• ISO 7238:198313882,IS,,ISO 7238:1983,Butter — Determination of pH of the serum — Potentiometric method,Beurre — Détermination du pH de la phase aqueuse — Méthode potentiométrique,1983-12-01,1,[
• ISO 7240-1:198813885,IS,,ISO 7240-1:1988,Fire detection and alarm systems — Part 1: General and definitions,Systèmes de détection d'incendie et d'alarme — Partie 1: Généralités et définitions,198
• ISO 7240-1:200541115,IS,,ISO 7240-1:2005,Fire detection and alarm systems — Part 1: General and definitions,Systèmes de détection et d'alarme d'incendie — Partie 1: Généralités et définitions,200
• ISO 7240-1:201455316,IS,,ISO 7240-1:2014,Fire detection and alarm systems — Part 1: General and definitions,Systèmes de détection et d'alarme d'incendie — Partie 1: Généralités et définitions,201
• ISO 7240-2:200336118,IS,,ISO 7240-2:2003,Fire detection and alarm systems — Part 2: Control and indicating equipment,Systèmes de détection et d'alarme d'incendie — Partie 2: Équipement de contrôl
• ISO 7240-3:201053566,IS,,ISO 7240-3:2010,Fire detection and alarm systems — Part 3: Audible alarm devices,Systèmes de détection et d'alarme d'incendie — Partie 3: Dispositifs d'alarme sonores,201
• ISO 7240-4:200336117,IS,,ISO 7240-4:2003,Fire detection and alarm systems — Part 4: Power supply equipment,Systèmes de détection et d'alarme d'incendie — Partie 4: Équipement d'alimentation élect
• ISO 7240-5:200336119,IS,,ISO 7240-5:2003,Fire detection and alarm systems — Part 5: Point-type heat detectors,Systèmes de détection et d'alarme incendie — Partie 5: Détecteurs de chaleur ponctuel
• ISO 7240-5:2003/Cor 1:200543018,IS,Cor,ISO 7240-5:2003/Cor 1:2005,Fire detection and alarm systems — Part 5: Point-type heat detectors — Technical Corrigendum 1,Systèmes de détection et d'alarme incendie —
• ISO 7240-5:201255317,IS,,ISO 7240-5:2012,Fire detection and alarm systems — Part 5: Point-type heat detectors,Systèmes de détection et d'alarme d'incendie — Partie 5: Détecteurs de chaleur de typ
• ISO 7240-6:200438771,IS,,ISO 7240-6:2004,Fire detection and alarm systems — Part 6: Carbon monoxide fire detectors using electro-chemical cells,Systèmes de détection et d'alarme incendie — Partie
• ISO 7240-7:200336120,IS,,ISO 7240-7:2003,"Fire detection and alarm systems — Part 7: Point-type smoke detectors using scattered light, transmitted light or ionization","Systèmes de détection et d
• ISO 7240-7:201151166,IS,,ISO 7240-7:2011,"Fire detection and alarm systems — Part 7: Point-type smoke detectors using scattered light, transmitted light or ionization","Systèmes de détection et d
• ISO 7240-7:201868583,IS,,ISO 7240-7:2018,"Fire detection and alarm systems — Part 7: Point-type smoke detectors using scattered light, transmitted light or ionization","Systèmes de détection et d
• ISO 7240-8:200742901,IS,,ISO 7240-8:2007,Fire detection and alarm systems — Part 8: Carbon monoxide fire detectors using an electro-chemical cell in combination with a heat sensor,Systèmes de dét
• ISO 7240-10:200740729,IS,,ISO 7240-10:2007,Fire detection and alarm systems — Part 10: Point-type flame detectors,Systèmes de détection et d'alarme d'incendie — Partie 10: Détecteurs de flammes po
• ISO 7240-11:200538002,IS,,ISO 7240-11:2005,Fire detection and alarm systems — Part 11: Manual call points,Systèmes de détection et d'alarme d'incendie — Partie 11: Déclencheurs manuels d'alarme,2
• ISO 7240-11:2005/Amd 1:200950374,IS,Amd,ISO 7240-11:2005/Amd 1:2009,Fire detection and alarm systems — Part 11: Manual call points — Amendment 1,Systèmes de détection et d'alarme d'incendie — Partie 11: Déc
• ISO 7240-12:200641144,IS,,ISO 7240-12:2006,Fire detection and alarm systems — Part 12: Line type smoke detectors using a transmitted optical beam,Systèmes de détection d'incendie et d'alarme — Par
• ISO 7240-12:201462764,IS,,ISO 7240-12:2014,Fire detection and alarm systems — Part 12: Line type smoke detectors using a transmitted optical beam,Systèmes de détection d'incendie et d'alarme — Par
• ISO 7240-13:200538946,IS,,ISO 7240-13:2005,Fire detection and alarm systems — Part 13: Compatibility assessment of system components,Systèmes de détection et d'alarme d'incendie — Partie 13: Estim
• ISO 7240-15:200436865,IS,,ISO 7240-15:2004,"Fire detection and alarm systems — Part 15: Point type fire detectors using scattered light, transmitted light or ionization sensors in combination with
• ISO 7240-15:2004/Cor 1:200543017,IS,Cor,ISO 7240-15:2004/Cor 1:2005,"Fire detection and alarm systems — Part 15: Point type fire detectors using scattered light, transmitted light or ionization sensors in co
• ISO 7240-17:200951209,IS,,ISO 7240-17:2009,Fire detection and fire alarm systems — Part 17: Short-circuit isolators,Systèmes de détection d'incendie et d'alarme — Partie 17: Isolateurs de court-ci
• ISO 7240-18:200951210,IS,,ISO 7240-18:2009,Fire detection and alarm systems — Part 18: Input/output devices,Systèmes de détection et d'alarme d'incendie — Partie 18: Dispositifs d'entrée/sortie,20
• ISO 7240-22:200740178,IS,,ISO 7240-22:2007,Fire detection and alarm systems — Part 22: Smoke-detection equipment for ducts,Systèmes de détection et d'alarme d'incendie — Partie 22: Équipement de d
• ISO 7240-24:201051211,IS,,ISO 7240-24:2010,Fire detection and fire alarm systems — Part 24: Sound-system loudspeakers,Systèmes de détection d'incendie et d'alarme — Partie 24: Haut-parleurs pour s
• ISO 7240-24:2010/Amd 1:201357919,IS,Amd,ISO 7240-24:2010/Amd 1:2013,Fire detection and fire alarm systems — Part 24: Sound-system loudspeakers — Amendment 1,Systèmes de détection d'incendie et d'alarme — Par
• ISO 7240-27:200944133,IS,,ISO 7240-27:2009,"Fire detection and alarm systems — Part 27: Point-type fire detectors using a scattered-light, transmitted-light or ionization smoke sensor, an electroc
• ISO 7240-27:201867746,IS,,ISO 7240-27:2018,"Fire detection and alarm systems — Part 27: Point type fire detectors using a smoke sensor in combination with a carbon monoxide sensor and, optionally,
• ISO 7240-28:200844134,IS,,ISO 7240-28:2008,Fire detection and alarm systems — Part 28: Fire protection control equipment,Systèmes de détection et d'alarme d'incendie — Partie 28: Équipement de com
• ISO 7241-1:198713891,IS,,ISO 7241-1:1987,Hydraulic fluid power — Quick-action couplings — Part 1: Dimensions and requirements,Transmissions hydrauliques — Raccords rapides — Partie 1: Dimensions
• ISO 7241-2:198613892,IS,,ISO 7241-2:1986,Hydraulic fluid power — Quick-action couplings — Part 2: Test methods,Transmissions hydrauliques — Raccords rapides — Partie 2: Méthodes d'essai,1986-12-0
• ISO 7241-2:200029845,IS,,ISO 7241-2:2000,Hydraulic fluid power — Quick-action couplings — Part 2: Test methods,Transmissions hydrauliques — Raccords rapides — Partie 2: Méthodes d'essai,2000-03-2
• ISO 7241:201454886,IS,,ISO 7241:2014,Hydraulic fluid power — Dimensions and requirements of quick-action couplings,Transmissions hydrauliques — Dimensions et exigences des raccords rapides,2014
• ISO 7243:198213894,IS,,ISO 7243:1982,"Hot environments — Estimation of the heat stress on working man, based on the WBGT-index (wet bulb globe temperature)","Ambiances chaudes — Estimation de l
• ISO 7243:198913895,IS,,ISO 7243:1989,"Hot environments — Estimation of the heat stress on working man, based on the WBGT-index (wet bulb globe temperature)","Ambiances chaudes — Estimation de l
• ISO 7250-1:200844152,IS,,ISO 7250-1:2008,Basic human body measurements for technological design — Part 1: Body measurement definitions and landmarks,Définitions des mesures de base du corps humai
• ISO 7250:199613903,IS,,ISO 7250:1996,Basic human body measurements for technological design,Définitions des mesures de base du corps humain pour la conception technologique,1996-07-11,1,['13.18
• ISO 7251:198413904,IS,,ISO 7251:1984,Microbiology — General guidance for enumeration of presumptive Escherichia coli — Most probable number technique,Microbiologie — Directives générales pour l
• ISO 7251:199313905,IS,,ISO 7251:1993,Microbiology — General guidance for enumeration of presumptive Escherichia coli — Most probable number technique,Microbiologie — Directives générales pour l
• ISO 7253:198413907,IS,,ISO 7253:1984,Paints and varnishes — Determination of resistance to neutral salt spray,Peintures et vernis — Détermination de la résistance au brouillard salin neutre,198
• ISO 7253:199620357,IS,,ISO 7253:1996,Paints and varnishes — Determination of resistance to neutral salt spray (fog),Peintures et vernis — Détermination de la résistance au brouillard salin neut
• ISO 7254:198413908,IS,,ISO 7254:1984,Paints and varnishes — Assessment of natural spreading rate — Brush application,Peintures et vernis — Évaluation du rendement d'application normal (naturel)
• ISO 7257:198313912,IS,,ISO 7257:1983,Aircraft — Hydraulic tubing joints and fittings — Rotary flexure test,Aéronautique — Joints et raccords pour tubes hydrauliques — Essai de flexion rotative,
• ISO 7259:198813914,IS,,ISO 7259:1988,Predominantly key-operated cast iron gate valves for underground use,Robinets-vannes en fonte généralement manoeuvrés par clé à béquille pour installations
• ISO 7261:198713915,IS,,ISO 7261:1987,Photography — 110-size cartridges — Dimensions,Photographie — Chargeurs de format 110 — Dimensions,1987-12-17,1,['37.040.20'],ISO/TC 42,9599,,[22024],"['en'
• ISO 7263:198513916,IS,,ISO 7263:1985,Corrugating medium — Determination of the flat crush resistance after laboratory fluting,Papier cannelure pour carton ondulé — Détermination de la résistanc
• ISO 7263:19941583,IS,,ISO 7263:1994,Corrugating medium — Determination of the flat crush resistance after laboratory fluting,Papier cannelure pour carton ondulé — Détermination de la résistance
• ISO 7263:200841399,IS,,ISO 7263:2008,Corrugating medium — Determination of the flat crush resistance after laboratory fluting,Papier cannelure pour carton ondulé — Détermination de la résistanc
• ISO 7263:201156171,IS,,ISO 7263:2011,Corrugating medium — Determination of the flat crush resistance after laboratory fluting,Papier cannelure pour carton ondulé — Détermination de la résistanc
• ISO 7264:198313917,IS,,ISO 7264:1983,Cross-country skis — Dimensions of the binding mounting area for toe clip bindings,Ski de fond — Dimensions de la zone de montage pour les fixations avec ét
• ISO 7265:198413918,IS,,ISO 7265:1984,Cross-country skis — Binding mounting area — Static screw retention strength — Requirements and test method,Skis de fond — Zone de montage de la fixation —
• ISO 7267-1:198613920,IS,,ISO 7267-1:1986,Rubber-covered rollers — Determination of apparent hardness — Part 1: IRHD method,Cylindres revêtus de caoutchouc — Détermination de la dureté apparente —
• ISO 7267-1:199720169,IS,,ISO 7267-1:1997,Rubber-covered rollers — Determination of apparent hardness — Part 1: IRHD method,Cylindres revêtus de caoutchouc — Détermination de la dureté apparente —
• ISO 7267-1:200843672,IS,,ISO 7267-1:2008,Rubber-covered rollers — Determination of apparent hardness — Part 1: IRHD method,Cylindres revêtus de caoutchouc — Détermination de la dureté apparente —
• ISO 7267-1:201772782,IS,,ISO 7267-1:2017,Rubber-covered rollers — Determination of apparent hardness — Part 1: IRHD method,Cylindres revêtus de caoutchouc — Détermination de la dureté apparente —
• ISO 7267-2:198613921,IS,,ISO 7267-2:1986,Rubber-covered rollers — Determination of apparent hardness — Part 2: Shore-type durometer method,Cylindres revêtus de caoutchouc — Détermination de la du
• ISO 7267-2:200843673,IS,,ISO 7267-2:2008,Rubber-covered rollers — Determination of apparent hardness — Part 2: Shore-type durometer method,Cylindres revêtus de caoutchouc — Détermination de la du
• ISO 7267-3:198813922,IS,,ISO 7267-3:1988,Rubber-covered rollers — Determination of apparent hardness — Part 3: Pusey and Jones method,Cylindres revêtus de caoutchouc — Détermination de la dureté
• ISO 7267-3:200742238,IS,,ISO 7267-3:2007,Rubber-covered rollers — Determination of apparent hardness — Part 3: Pusey and Jones method,Cylindres revêtus de caoutchouc — Détermination de la dureté
• ISO 7267-3:201157735,IS,,ISO 7267-3:2011,Rubber-covered rollers — Determination of apparent hardness — Part 3: Pusey and Jones method,Cylindres revêtus de caoutchouc — Détermination de la dureté
• ISO 7267-3:201772783,IS,,ISO 7267-3:2017,Rubber-covered rollers — Determination of apparent hardness — Part 3: Pusey and Jones method,Cylindres revêtus de caoutchouc — Détermination de la dureté
• ISO 7269:198713926,IS,,ISO 7269:1987,Rubber — Determination of free sulfur,Caoutchouc — Détermination du soufre libre,1987-10-22,1,['83.060'],ISO/TC 45,9599,,[21819],"['en','fr']",9
• ISO 7270-1:200333761,IS,,ISO 7270-1:2003,Rubber — Analysis by pyrolytic gas-chromatographic methods — Part 1: Identification of polymers (single polymers and polymer blends),Caoutchouc — Méthodes
• ISO 7270-1:2003/Amd 1:201053037,IS,Amd,ISO 7270-1:2003/Amd 1:2010,Rubber — Analysis by pyrolytic gas-chromatographic methods — Part 1: Identification of polymers (single polymers and polymer blends) — Amend
• ISO 7270-2:200538581,IS,,ISO 7270-2:2005,Rubber — Analysis by pyrolytic gas-chromatographic methods — Part 2: Determination of styrene/butadiene/isoprene ratio,Caoutchouc — Méthodes d'analyse par
• ISO 7270-2:201253025,IS,,ISO 7270-2:2012,Rubber — Analysis by pyrolytic gas-chromatographic methods — Part 2: Determination of styrene/butadiene/isoprene ratio,Caoutchouc — Méthodes d'analyse par
• ISO 7270:198713927,IS,,ISO 7270:1987,Rubber — Identification of polymers (single polymers and blends) — Pyrolytic gas chromatographic method,Caoutchouc — Identification des polymères (un seul p
• ISO 7271:198213928,IS,,ISO 7271:1982,Aluminium and aluminium alloys — Foil and thin strip — Dimensional tolerances,Aluminium et alliages d'aluminium — Feuilles et bandes minces — Tolérances dim
• ISO 7272:199313930,IS,,ISO 7272:1993,Photography — Paper dimensions — Paper for documentary reproduction,Photographie — Dimensions des papiers — Papiers pour reproduction de documents,1993-10-1
• ISO 7273:198113931,IS,,ISO 7273:1981,Wrought aluminium and aluminium alloys — Extruded round bars — Tolerances on shape and dimensions,Aluminium et alliages d'aluminium corroyés — Barres rondes
• ISO 7278-2:198813935,IS,,ISO 7278-2:1988,Liquid hydrocarbons — Dynamic measurement — Proving systems for volumetric meters — Part 2: Pipe provers,Hydrocarbures liquides — Mesurage dynamique — Sys
• ISO 7278-3:198613936,IS,,ISO 7278-3:1986,Liquid hydrocarbons — Dynamic measurement — Proving systems for volumetric meters — Part 3: Pulse interpolation techniques,Hydrocarbures liquides — Mesura
• ISO 7278-4:199913938,IS,,ISO 7278-4:1999,Liquid hydrocarbons — Dynamic measurement — Proving systems for volumetric meters — Part 4: Guide for operators of pipe provers,Hydrocarbures liquides — M
• ISO 7284:198413942,IS,,ISO 7284:1984,"Resistance welding equipment — Particular specifications applicable to transformers with two separate secondary windings for multi-spot welding, as used in
• ISO 7287:199213946,IS,,ISO 7287:1992,Graphical symbols for thermal cutting equipment,Symboles graphiques pour équipements de coupage thermique,1992-05-14,1,"['01.080.20','25.160.30']",ISO/TC 44
• ISO 7289:199013948,IS,,ISO 7289:1990,"Quick-action couplings with shut-off valve for welding, cutting and allied processes","Raccords rapides à obturation pour équipements pour soudage, coupage
• ISO 7289:199624624,IS,,ISO 7289:1996,"Quick-action couplings with shut-off valves for gas welding, cutting and allied processes","Raccords rapides à obturation pour équipements pour soudage au
• ISO 7289:201044986,IS,,ISO 7289:2010,"Gas welding equipment — Quick-action couplings with shut-off valves for welding, cutting and allied processes","Matériel de soudage aux gaz — Raccords rapi
• ISO 7291:199013950,IS,,ISO 7291:1990,"Welding, cutting and allied processes — Manifold regulators","Soudage, coupage et techniques connexes — Détendeurs des centrales de bouteilles (de gaz indu
• ISO 7291:199926486,IS,,ISO 7291:1999,"Gas welding equipment — Pressure regulators for manifold systems used in welding, cutting and allied processes up to 300 bar","Matériel de soudage aux gaz
• ISO 7292:199713951,IS,,ISO 7292:1997,"Flowmeter regulators used on cylinders for welding, cutting and allied processes — Classification and specifications","Détendeurs avec débitmètres utilisés
• ISO 7293:198313952,IS,,ISO 7293:1983,Forestry machinery — Portable chain saws — Engine performance and fuel consumption,Machines forestières — Scies à chaîne portatives — Puissance et consommat
• ISO 7293:199725973,IS,,ISO 7293:1997,Forestry machinery — Portable chain saws — Engine performance and fuel consumption,Machines forestières — Scies à chaîne portatives — Puissance et consommat
• ISO 7293:202179635,IS,,ISO 7293:2021,Forestry machinery — Portable chain-saws — Engine performance and fuel consumption,Machines forestières — Scies à chaîne portatives — Puissance et consommat
• ISO 7295:198213954,IS,,ISO 7295:1982,Tyre valves — Aircraft — Interchangeability dimensions,Valves pour pneumatiques d'aéronefs — Dimensions d'interchangeabilité,1982-11-01,1,['83.160.20'],ISO/
• ISO 7296-2:199624511,IS,,ISO 7296-2:1996,Cranes — Graphical symbols — Part 2: Mobile cranes,Appareils de levage à charge suspendue — Symboles graphiques — Partie 2: Grues mobiles,1996-12-26,1,"['
• ISO 7299-1:200741465,IS,,ISO 7299-1:2007,Diesel engines — End-mounting flanges for pumps — Part 1: Fuel injection pumps,Moteurs diesels — Brides de montage des pompes — Partie 1: Pompes d'injecti
• ISO 7299-2:200941467,IS,,ISO 7299-2:2009,Diesel engines — End-mounting flanges for pumps — Part 2: High-pressure supply pumps for common rail fuel injection systems,Moteurs diesels — Brides de mo
• ISO 7299:198413961,IS,,ISO 7299:1984,Road vehicles — End-mounting flanges for fuel injection pumps,Véhicules routiers — Brides de montage pour pompes d'injection,1984-11-01,1,['43.060.40'],ISO/
• ISO 7299:199625065,IS,,ISO 7299:1996,Diesel engines — End-mounting flanges for fuel injection pumps,Moteurs diesels — Brides de montage des pompes d'injection de combustible,1996-05-09,2,['43.0
• ISO 7301:198813963,IS,,ISO 7301:1988,Rice — Specification,Riz — Spécifications,1988-10-06,1,['67.060'],ISO/TC 34/SC 4,9599,,[24553],"['en','fr']",12
• ISO 7301:200224553,IS,,ISO 7301:2002,Rice — Specification,Riz — Spécifications,2002-05-30,2,['67.060'],ISO/TC 34/SC 4,9599,[13963],[50935],"['en','fr']",17
• ISO 7301:201150935,IS,,ISO 7301:2011,Rice — Specification,Riz — Spécifications,2011-02-17,3,['67.060'],ISO/TC 34/SC 4,9599,[24553],[73411],"['en','fr','ru']",19
• ISO 7302:198213964,IS,,ISO 7302:1982,Cereals and cereal products — Determination of total fat content,Céréales et produits céréaliers — Détermination de la teneur en matières grasses totales,19
• ISO 7304-1:201644312,IS,,ISO 7304-1:2016,Durum wheat semolina and alimentary pasta — Estimation of cooking quality of alimentary pasta by sensory analysis — Part 1: Reference method,Semoule de bl
• ISO 7304:198513966,IS,,ISO 7304:1985,Durum wheat semolinas and alimentary pasta — Estimation of cooking quality of spaghetti by sensory analysis,Semoules de blé dur et pâtes alimentaires — Appr
• ISO 7305:198613967,IS,,ISO 7305:1986,Milled cereal products — Determination of fat acidity,Produits de mouture des céréales — Détermination de l'acidité grasse,1986-03-13,1,['67.060'],ISO/TC 34
• ISO 7305:199813968,IS,,ISO 7305:1998,Milled cereal products — Determination of fat acidity,Produits de mouture des céréales — Détermination de l'acidité grasse,1998-07-16,2,['67.060'],ISO/TC 34
• ISO 7310:198413973,IS,,ISO 7310:1984,Road vehicles — Compression ignition engines — Heads for spin-on fuel filters with horizontal flange — Mounting and connecting dimensions,Véhicules routiers
• ISO 7311:198413975,IS,,ISO 7311:1984,Road vehicles — Compression ignition engines — Heads for fuel filters with vertical flange — Mounting and connecting dimensions,Véhicules routiers — Moteurs
• ISO 7313:198413979,IS,,ISO 7313:1984,Aircraft — High temperature convoluted hose assemblies in polytetrafluoroethylene (PTFE),"Aéronefs — Tuyauterie flexible, haute température, convolutée, en
• ISO 7314:198913981,IS,,ISO 7314:1989,"Aerospace — Fluid systems — Hose assembly, metal",Aéronautique et espace — Systèmes de fluides — Tuyauteries flexibles métalliques,1989-11-09,1,['49.080'],
• ISO 7314:199413982,IS,,ISO 7314:1994,"Aerospace — Fluid systems — Hose assembly, metal",Aéronautique et espace — Systèmes de fluides — Tuyauteries flexibles métalliques,1994-09-29,2,['49.080'],
• ISO 7315:198513983,IS,,ISO 7315:1985,Aerospace — 'P' clamps (loop clamps) for fluid tubing installations — Dimensions,Aéronautique et espace — Colliers de fixation en P pour tuyauteries de flui
• ISO 7319:198213988,IS,,ISO 7319:1982,Aerospace construction — Fluid systems — Interface of metric couplings,Constructions aérospatiales — Systèmes hydrauliques — Interface des raccordements mét
• ISO 7319:199213989,IS,,ISO 7319:1992,Aerospace — Fluid systems — Interface of 24 degree cone metric couplings,Aéronautique et espace — Systèmes de fluides — Interface des raccordements métrique
• ISO 7320:198513990,IS,,ISO 7320:1985,"Aerospace — Fluid systems port connection, seal and fitting end — Dimensions","Aéronautique et espace — Orifice fileté de raccordement, joint et élément à
• ISO 7320:199213991,IS,,ISO 7320:1992,"Aerospace — Couplings, threaded and sealed, for fluid systems — Dimensions",Aéronautique et espace — Raccordement fileté étanche pour les systèmes de fluid
• ISO 7322:198613993,IS,,ISO 7322:1986,Cork — Composition cork — Test methods,Liège — Aggloméré composé — Méthodes d'essai,1986-04-03,1,['79.100'],ISO/TC 87,9599,,[28113],"['en','fr']",3
• ISO 7322:200028113,IS,,ISO 7322:2000,Composition cork — Test methods,Aggloméré composé de liège — Méthodes d'essai,2000-03-23,2,['79.100'],ISO/TC 87,9599,[13993],[62402],"['en','fr']",7
• ISO 7323:198513994,IS,,ISO 7323:1985,"Rubber, raw and unvulcanized compounded — Determination of plasticity number and recovery number — Parallel plate method",Caoutchouc brut et mélanges non v
• ISO 7323:1985/Cor 1:200338012,IS,Cor,ISO 7323:1985/Cor 1:2003,"Rubber, raw and unvulcanized compounded — Determination of plasticity number and recovery number — Parallel plate method — Technical Corrigen
• ISO 7326:198414000,IS,,ISO 7326:1984,Rubber and plastics hoses — Assessment of ozone resistance under static conditions,Tuyaux en caoutchouc et en plastique — Évaluation de la résistance à l'oz
• ISO 7326:199114001,IS,,ISO 7326:1991,Rubber and plastics hoses — Assessment of ozone resistance under static conditions,Tuyaux en caoutchouc et en plastique — Évaluation de la résistance à l'oz
• ISO 7326:200640963,IS,,ISO 7326:2006,Rubber and plastics hoses — Assessment of ozone resistance under static conditions,Tuyaux en caoutchouc et en plastique — Évaluation de la résistance à l'oz
• ISO 7328:198414004,IS,,ISO 7328:1984,Milk-based edible ices and ice-mixes — Determination of fat content — Roese-Gottlieb gravimetric method (Reference method),Glaces de consommation et prépara
• ISO 7328:199927797,IS,,ISO 7328:1999,Milk-based edible ices and ice mixes — Determination of fat content — Gravimetric method (Reference method),Glaces de consommation et préparations pour glac
• ISO 7328:200851015,IS,,ISO 7328:2008,Milk-based edible ices and ice mixes — Determination of fat content — Gravimetric method (Reference method),Glaces de consommation et préparations pour glac
• ISO 7330:198814006,IS,,ISO 7330:1988,Photography — 110-size cartridges — Location and dimensions of film exposure and film identification notches,Photographie — Chargeurs de format 110 — Emplac
• ISO 7331:198314007,IS,,ISO 7331:1983,Ski-poles for alpine skiing — Safety requirements and test methods,Bâtons de skis alpins — Exigences de sécurité et méthodes d'essai,1983-11-01,1,['97.220.2
• ISO 7331:199014008,IS,,ISO 7331:1990,Ski-poles for alpine skiing — Safety requirements and test methods,Bâtons de skis alpins — Prescriptions de sécurité et méthodes d'essai,1990-02-22,2,['97.2
• ISO 7331:200538624,IS,,ISO 7331:2005,Ski-poles for alpine skiing — Requirements and test methods,Bâtons de skis alpins — Exigences et méthodes d'essai,2005-07-29,3,['97.220.20'],ISO/TC 83/SC 4,
• ISO 7331:201155819,IS,,ISO 7331:2011,Ski-poles for alpine skiing — Requirements and test methods,Bâtons de skis alpins — Exigences et méthodes d'essai,2011-07-01,4,['97.220.20'],ISO/TC 83/SC 4,
• ISO 7332:198314009,IS,,ISO 7332:1983,"Metric fasteners for aerospace construction — Nuts, anchor, self-locking, floating, two-lug, reduced series, with counterbore — Strength classification 1 1
• ISO 7341:198514019,IS,,ISO 7341:1985,Banking — Nostro accounts reconciliation,Opérations bancaires — Procédures de rapprochement de comptes,1985-09-26,1,['03.060'],ISO/TC 68,9599,,[27444],"['en
• ISO 7341:1985/Cor 1:199933218,IS,Cor,ISO 7341:1985/Cor 1:1999,Banking — Nostro accounts reconciliation — Technical Corrigendum 1,Opérations bancaires — Procédures de rapprochement de comptes — Rectificati
• ISO 7341:200027444,IS,,ISO 7341:2000,Banking — Nostro accounts reconciliation,Opérations bancaires — Procédures de rapprochement de comptes,2000-08-31,2,['03.060'],ISO/TC 68,9599,"[14019,33218]
• ISO 7342:198214020,IS,,ISO 7342:1982,Road vehicles — Diagnostic systems — Equipment for ignition systems testing,Véhicules routiers — Système de diagnostic — Équipement pour contrôle des systèm
• ISO 7343:198314021,IS,,ISO 7343:1983,Cinematography — Two-track photographic sound records on 35 mm motion-picture prints — Positions and width dimensions,Cinématographie — Enregistrement de de
• ISO 7345:198514023,IS,,ISO 7345:1985,Thermal insulation — Physical quantities and definitions,Isolation thermique — Grandeurs physiques et définitions,1985-05-23,1,"['01.060','27.200']",ISO/TC
• ISO 7345:198714024,IS,,ISO 7345:1987,Thermal insulation — Physical quantities and definitions,Isolation thermique — Grandeurs physiques et définitions,1987-11-19,2,"['01.060','27.220']",ISO/TC
• ISO 7346-1:198414025,IS,,ISO 7346-1:1984,"Water quality — Determination of the acute lethal toxicity of substances to a freshwater fish (Brachydanio rerio, Hamilton-Buchanan (Teleostei, Cyprinida
• ISO 7346-2:198414027,IS,,ISO 7346-2:1984,"Water quality — Determination of the acute lethal toxicity of substances to a freshwater fish (Brachydanio rerio Hamilton-Buchanan (Teleostei, Cyprinidae
• ISO 7346-3:198414029,IS,,ISO 7346-3:1984,"Water quality — Determination of the acute lethal toxicity of substances to a freshwater fish (Brachydanio rerio Hamilton-Buchanan (Teleostei, Cyprinidae
• ISO 7350:198414034,IS,,ISO 7350:1984,Text communication — Registration of graphic character subrepertoires,Transmission de texte — Procédure d'enregistrement des sous-répertoires de caractères
• ISO 7353:198514038,IS,,ISO 7353:1985,Oil of rosewood — Determination of alpha-terpineol content — Gas chromatographic method on packed columns,Huile essentielle de bois de rose — Détermi- natio
• ISO 7355:198514041,IS,,ISO 7355:1985,Oils of sassafras and nutmeg — Determination of safrole and cis- and trans-isosafrole content — Gas chromatographic method on packed columns,Huiles essentie
• ISO 7356:198514043,IS,,ISO 7356:1985,Oils of thujone-containing Artemisia and oil of sage (Salvia officinalis Linnaeus) — Determination of alpha- and beta-thujone content — Gas chromatographic
• ISO 7357:198514045,IS,,ISO 7357:1985,Oil of calamus — Determination of cis-beta-asarone content — Gas chromatographic method on packed columns,Huile essentielle de calamus — Détermination de la
• ISO 7358:200232043,IS,,ISO 7358:2002,"Oils of bergamot, lemon, citron and lime, fully or partially reduced in bergapten — Determination of bergapten content by high-pressure liquid chromatograp
• ISO 7364:198314053,IS,,ISO 7364:1983,Shipbuilding and marine structures — Deck machinery — Accommodation ladder winches,Construction navale et structures maritimes — Auxiliaires de pont — Treui
• ISO 7365:198314054,IS,,ISO 7365:1983,Shipbuilding and marine structures — Deck machinery — Towing winches for deep sea use,Construction navale et structures maritimes — Auxiliaires de pont — Tr
• ISO 7368:198914056,IS,,ISO 7368:1989,Hydraulic fluid power — Two-port slip-in cartridge valves — Cavities,"Transmissions hydrauliques — Distributeurs à cartouche, à bride, à deux orifices — Log
• ISO 7368:201662775,IS,,ISO 7368:2016,Hydraulic fluid power — Two-port slip-in cartridge valves — Cavities,"Transmissions hydrauliques — Distributeurs à cartouche, à bride, à deux orifices — Log
• ISO 7369:198314057,IS,,ISO 7369:1983,Pipework — Flexible metallic hoses — Vocabulary of general terms,Tuyauteries — Tuyaux métalliques flexibles — Vocabulaire des termes généraux,1983-06-01,1,"
• ISO 7369:199520552,IS,,ISO 7369:1995,Pipework — Flexible metallic hoses — Vocabulary of general terms,Tuyauteries — Tuyaux métalliques flexibles — Vocabulaire des termes généraux,1995-12-21,2,"
• ISO 7369:200432408,IS,,ISO 7369:2004,Pipework — Metal hoses and hose assemblies — Vocabulary,Tuyauteries — Tuyaux et tuyauteries métalliques flexibles — Vocabulaire,2004-08-16,3,"['23.040.70','
• ISO 7370:198314058,IS,,ISO 7370:1983,"Glass fibre reinforced thermosetting plastics (GRP) pipes and fittings — Nominal diameters, specified diameters and standard lengths","Tubes et raccords en
• ISO 7371:198514059,IS,,ISO 7371:1985,Performance of household refrigerating appliances — Refrigerators with or without low temperature compartment,Fonctionnement des appareils de réfrigération
• ISO 7371:1985/Amd 1:198714061,IS,Amd,ISO 7371:1985/Amd 1:1987,Performance of household refrigerating appliances — Refrigerators with or without low temperature compartment — Amendment 1,Fonctionnement des
• ISO 7371:199514060,IS,,ISO 7371:1995,Household refrigerating appliances — Refrigerators with or without low-temperature compartment — Characteristics and test methods,Appareils de réfrigération
• ISO 7371:1995/Amd 1:199727284,IS,Amd,ISO 7371:1995/Amd 1:1997,Household refrigerating appliances — Refrigerators with or without low-temperature compartment — Characteristics and test methods — Amendment
• ISO 7372:198614063,IS,,ISO 7372:1986,Trade data interchange — Trade data elements directory,Échange de données dans le commerce — Répertoire d'éléments de données commerciales,1986-02-27,1,['01
• ISO 7372:199323441,IS,,ISO 7372:1993,Trade data interchange — Trade data elements directory,Échange de données dans le commerce — Répertoire d'éléments de données commerciales,1993-12-23,2,['01
• ISO 7374:198714065,IS,,ISO 7374:1987,Photography — 110-size cartridges — Dimensions and format of film and backing paper,Photographie — Chargeurs de format 110 — Dimensions et présentation du f
• ISO 7375-1:198214066,IS,,ISO 7375-1:1982,Road vehicles — Coiled pipe assemblies for pneumatic braking connection between motor vehicles and towed vehicles — Part 1: Dimensions,Véhicules routiers
• ISO 7376-1:198414069,IS,,ISO 7376-1:1984,Laryngoscopic fittings — Part 1: Hook-on type handle-blade fittings,Éléments de laryngoscopes — Partie 1: Système manche/lame à enclenchement,1984-05-01,1
• ISO 7376-1:199414070,IS,,ISO 7376-1:1994,Laryngoscopic fittings — Part 1: Conventional hook-on type handle-blade fittings,Éléments de laryngoscopes — Partie 1: Système conventionnel manche/lame à
• ISO 7376-2:198414072,IS,,ISO 7376-2:1984,Laryngoscopic fittings — Part 2: Miniature electric lamps — Screw threads and sockets,Éléments de laryngoscopes — Partie 2: Lampes électriques miniatures
• ISO 7376-2:199714073,IS,,ISO 7376-2:1997,Laryngoscopic fittings — Part 2: Miniature electric lamps — Screw threads and sockets for conventional blades,Éléments de laryngoscopes — Partie 2: Lampes
• ISO 7376-3:199614074,IS,,ISO 7376-3:1996,Laryngoscopic fittings — Part 3: Fibre-illuminated re-usable rigid laryngoscopes,"Éléments de laryngoscopes — Partie 3: Laryngoscopes à fibres optiques ri
• ISO 7376:200337200,IS,,ISO 7376:2003,Anaesthetic and respiratory equipment — Laryngoscopes for tracheal intubation,Matériel d'anesthésie et de réanimation respiratoire — Laryngoscopes pour intu
• ISO 7376:200944073,IS,,ISO 7376:2009,Anaesthetic and respiratory equipment — Laryngoscopes for tracheal intubation,Matériel d'anesthésie et de réanimation respiratoire — Laryngoscopes pour intu
• ISO 7380-1:201153671,IS,,ISO 7380-1:2011,Button head screws — Part 1: Hexagon socket button head screws,Vis à tête cylindrique bombée plate — Partie 1: Vis à tête cylindrique bombée plate à six p
• ISO 7380-2:201153672,IS,,ISO 7380-2:2011,Button head screws — Part 2: Hexagon socket button head screws with collar,Vis à tête cylindrique bombée plate — Partie 2: Vis à tête cylindrique bombée p
• ISO 7380:198314080,IS,,ISO 7380:1983,Hexagon socket button head screws — Metric series,"Vis à métaux, à tête cylindrique bombée plate à six pans creux — Série métrique",1983-09-01,1,['21.060.10
• ISO 7380:199714081,IS,,ISO 7380:1997,Hexagon socket button head screws,"Vis à métaux, à tête cylindrique bombée plate à six pans creux",1997-11-13,2,['21.060.10'],ISO/TC 2,9599,[14080],[34453],
• ISO 7380:200434453,IS,,ISO 7380:2004,Hexagon socket button head screws,Vis à tête cylindrique bombée plate à six pans creux,2004-01-07,3,['21.060.10'],ISO/TC 2/SC 11,9599,[14081],[53671],"['en'
• ISO 7382:198614083,IS,,ISO 7382:1986,Ethylene for industrial use — Sampling in the liquid and the gaseous phase,Éthylène à usage industriel — Échantillonnage en phase liquide et en phase gazeus
• ISO 7385:198314086,IS,,ISO 7385:1983,Nuclear power plants — Guidelines to ensure quality of collected data on reliability,Centrales nucléaires — Principes directeurs pour assurer la qualité des
• ISO 7388-1:198314092,IS,,ISO 7388-1:1983,"Tool shanks with 7/24 taper for automatic tool changers — Part 1: Shanks Nos. 40, 45 and 50 — Dimensions","Queues d'outils à conicité 7/24 pour changemen
• ISO 7388-1:1983/Add 1:198414093,IS,Add,ISO 7388-1:1983/Add 1:1984,"Tool shanks with 7/24 taper for automatic tool changers — Part 1: Shanks Nos. 40, 45 and 50 — Dimensions — Addendum 1: Conicity tolerances"
• ISO 7388-2:198414094,IS,,ISO 7388-2:1984,"Tool shanks with 7/24 taper for automatic tool changers — Part 2: Retention knobs for shanks Nos. 40, 45 and 50 — Dimensions and mechanical characteristi
• ISO 7388-3:200734062,IS,,ISO 7388-3:2007,"Tool shanks with 7/24 taper for automatic tool changers — Part 3: Retention knobs for shanks of forms AC, AD, AF, UC, UD, UF, JD and JF","Queues d'outils
• ISO 7388-3:201360403,IS,,ISO 7388-3:2013,"Tool shanks with 7/24 taper for automatic tool changers — Part 3: Retention knobs for shanks of forms AC, AD, AF, UC, UD, UF, JD and JF","Queues d'outils
• ISO 7389:198214097,IS,,ISO 7389:1982,Building construction — Jointing products — Determination of elastic recovery,Construction immobilière — Produits pour joints — Détermination de la reprise
• ISO 7389:198714098,IS,,ISO 7389:1987,Building construction — Jointing products — Determination of elastic recovery,Construction immobilière — Produits pour joints — Détermination de la reprise
• ISO 7390:198214099,IS,,ISO 7390:1982,Building construction — Jointing products — Determination of resistance to flow,Construction immobilière — Produits pour joints — Détermination de la résist
• ISO 7390:198714100,IS,,ISO 7390:1987,Building construction — Jointing products — Determination of resistance to flow,Construction immobilière — Produits pour joints — Détermination de la résist
• ISO 7391-1:198714101,IS,,ISO 7391-1:1987,Plastics — Polycarbonate moulding and extrusion materials — Part 1: Designation,Plastiques — Matériaux polycarbonates pour moulage et extrusion — Partie 1
• ISO 7391-1:199625181,IS,,ISO 7391-1:1996,Plastics — Polycarbonate (PC) moulding and extrusion materials — Part 1: Designation system and basis for specifications,Plastiques — Polycarbonate (PC) p
• ISO 7391-1:200636275,IS,,ISO 7391-1:2006,Plastics — Polycarbonate (PC) moulding and extrusion materials — Part 1: Designation system and basis for specifications,Plastiques — Polycarbonate (PC) p
• ISO 7391-2:198614102,IS,,ISO 7391-2:1986,Plastics — Polycarbonate moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties,Plastiques — Matériaux p
• ISO 7391-2:199625182,IS,,ISO 7391-2:1996,Plastics — Polycarbonate (PC) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties,Plastiques — Polyca
• ISO 7391-2:200636276,IS,,ISO 7391-2:2006,Plastics — Polycarbonate (PC) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties,Plastiques — Polyca
• ISO 7393-2:198514106,IS,,ISO 7393-2:1985,"Water quality — Determination of free chlorine and total chlorine — Part 2: Colorimetric method using N,N-diethyl-1,4-phenylenediamine, for routine contr
• ISO 7393-3:198614107,IS,,ISO 7393-3:1986,Water quality — Determination of free chlorine and total chlorine — Part 3: Iodometric titration method for the determination of total chlorine,Qualité de
• ISO 7396-1:200225795,IS,,ISO 7396-1:2002,Medical gas pipeline systems — Part 1: Pipelines for compressed medical gases and vacuum,Réseaux de distribution de gaz médicaux — Partie 1: Réseaux de di
• ISO 7396-1:200740440,IS,,ISO 7396-1:2007,Medical gas pipeline systems — Part 1: Pipeline systems for compressed medical gases and vacuum,Systèmes de distribution de gaz médicaux — Partie 1: Systè
• ISO 7396-1:2007/Amd 1:201050924,IS,Amd,ISO 7396-1:2007/Amd 1:2010,Medical gas pipeline systems — Part 1: Pipeline systems for compressed medical gases and vacuum — Amendment 1: Requirements for terminal uni
• ISO 7396-1:2007/Amd 2:201052212,IS,Amd,ISO 7396-1:2007/Amd 2:2010,Medical gas pipeline systems — Part 1: Pipeline systems for compressed medical gases and vacuum — Amendment 2,Systèmes de distribution de ga
• ISO 7396-1:2007/Amd 3:201357986,IS,Amd,ISO 7396-1:2007/Amd 3:2013,Medical gas pipeline systems — Part 1: Pipeline systems for compressed medical gases and vacuum — Amendment 3: Terminology relating to alarm
• ISO 7396-2:200025796,IS,,ISO 7396-2:2000,Medical gas pipeline systems — Part 2: Anaesthetic gas scavenging disposal systems,Réseaux de distribution de gaz médicaux — Partie 2: Systèmes d'évacuati
• ISO 7396:198714111,IS,,ISO 7396:1987,Non-flammable medical gas pipeline systems,Réseaux de distribution de gaz médicaux non inflammables,1987-06-04,1,['11.040.10'],ISO/TC 121/SC 6,9599,,"[25795
• ISO 7398:198414115,IS,,ISO 7398:1984,Road vehicles — Motorcycles — D.C. flasher units,Véhicules routiers — Motocycles — Centrales clignotantes en courant continu,1984-10-01,1,['43.140'],ISO/TC
• ISO 7399:198414117,IS,,ISO 7399:1984,Road vehicles — Motorcycles — A.C. flasher units,Véhicules routiers — Motocycles — Centrales clignotantes en courant alternatif,1984-10-01,1,['43.140'],ISO/
• ISO 7400:198414119,IS,,ISO 7400:1984,Road vehicles — Mopeds — A.C. flasher units,Véhicules routiers — Cyclomoteurs — Centrales clignotantes en courant alternatif,1984-10-01,1,['43.140'],ISO/TC
• ISO 7401:198814121,IS,,ISO 7401:1988,Road vehicles — Lateral transient response test methods,Véhicules routiers — Méthodes d'essai en régime transitoire sous accélération latérale,1988-04-28,1,
• ISO 7401:200336998,IS,,ISO 7401:2003,Road vehicles — Lateral transient response test methods — Open-loop test methods,Véhicules routiers — Méthodes d'essai de réponse transitoire latérale — Mét
• ISO 7402:198514122,IS,,ISO 7402:1985,Microbiology — General guidance for the enumeration of enterobacteriaceae without resuscitation — MPN technique and colony count technique,Microbiologie — D
• ISO 7402:199314123,IS,,ISO 7402:1993,Microbiology — General guidance for the enumeration of Enterobacteriaceae without resuscitation — MPN technique and colony-count technique,Microbiologie — D
• ISO 7403:198314124,IS,,ISO 7403:1983,Fasteners for aerospace construction — Spline drive wrenching configuration — Metric series,Éléments de fixation pour les constructions aérospatiales — Entr
• ISO 7404-1:198414125,IS,,ISO 7404-1:1984,Methods for the petrographic analysis of bituminous coal and anthracite — Part 1: Glossary of terms,Méthodes d'analyse pétrographique des charbons bitumin
• ISO 7404-1:199414126,IS,,ISO 7404-1:1994,Methods for the petrographic analysis of bituminous coal and anthracite — Part 1: Vocabulary,Méthodes d'analyse pétrographique des charbons bitumineux et
• ISO 7404-1:201667682,IS,,ISO 7404-1:2016,Methods for the petrographic analysis of coals — Part 1: Vocabulary,Méthodes d'analyse pétrographique des charbons — Partie 1: Vocabulaire,2016-03-23,3,"[
• ISO 7404-2:198514127,IS,,ISO 7404-2:1985,Methods for the petrographic analysis of bituminous coal and anthracite — Part 2: Preparation of coal samples,Méthodes d'analyse pétrographique des charbo
• ISO 7404-2:200942798,IS,,ISO 7404-2:2009,Methods for the petrographic analysis of coals — Part 2: Methods of preparing coal samples,Méthodes d'analyse pétrographique des charbons — Partie 2: Prép
• ISO 7404-3:198414128,IS,,ISO 7404-3:1984,Methods for the petrographic analysis of bituminous coal and anthracite — Part 3: Method of determining maceral group composition,Méthodes d'analyse pétro
• ISO 7404-3:199414129,IS,,ISO 7404-3:1994,Methods for the petrographic analysis of bituminous coal and anthracite — Part 3: Method of determining maceral group composition,Méthodes d'analyse pétro
• ISO 7404-3:200942831,IS,,ISO 7404-3:2009,Methods for the petrographic analysis of coals — Part 3: Method of determining maceral group composition,Méthodes d'analyse pétrographique des charbons —
• ISO 7404-4:198814130,IS,,ISO 7404-4:1988,"Methods for the petrographic analysis of bituminous coal and anthracite — Part 4: Method of determining microlithotype, carbominerite and minerite compos
• ISO 7404-4:201769224,IS,,ISO 7404-4:2017,"Methods for the petrographic analysis of coals — Part 4: Method of determining microlithotype, carbominerite and minerite composition","Méthodes d'analys
• ISO 7404-5:198414131,IS,,ISO 7404-5:1984,Methods for the petrographic analysis of bituminous coal and anthracite — Part 5: Method of determining microscopically the reflectance of vitrinite,Métho
• ISO 7404-5:199414132,IS,,ISO 7404-5:1994,Methods for the petrographic analysis of bituminous coal and anthracite — Part 5: Method of determining microscopically the reflectance of vitrinite,Métho
• ISO 7404-5:200942832,IS,,ISO 7404-5:2009,Methods for the petrographic analysis of coals — Part 5: Method of determining microscopically the reflectance of vitrinite,Méthodes d'analyse pétrographi
• ISO 7405:199714134,IS,,ISO 7405:1997,Dentistry — Preclinical evaluation of biocompatibility of medical devices used in dentistry — Test methods for dental materials,Art dentaire — Évaluation pr
• ISO 7405:200838059,IS,,ISO 7405:2008,Dentistry — Evaluation of biocompatibility of medical devices used in dentistry,Art dentaire — Évaluation de la biocompatibilité des dispositifs médicaux ut
• ISO 7405:2008/Amd 1:201359502,IS,Amd,ISO 7405:2008/Amd 1:2013,Dentistry — Evaluation of biocompatibility of medical devices used in dentistry — Amendment 1: Positive control material,Art dentaire — Évalua
• ISO 7405:201871503,IS,,ISO 7405:2018,Dentistry — Evaluation of biocompatibility of medical devices used in dentistry,Médecine bucco-dentaire — Évaluation de la biocompatibilité des dispositifs
• ISO 7406:198614135,IS,,ISO 7406:1986,Bore type milling cutters for indexable inserts — Designation,Fraises à trou à plaquettes amovibles — Désignation,1986-08-28,1,['25.100.20'],ISO/TC 29/SC 9,
• ISO 7409:198414138,IS,,ISO 7409:1984,Fertilizers — Marking — Presentation and declarations,Engrais — Marquage — Présentation et mentions à déclarer,1984-03-01,1,['65.080'],ISO/TC 134,9599,,[659
• ISO 7411:198414140,IS,,ISO 7411:1984,Hexagon bolts for high-strength structural bolting with large width across flats (thread lengths according to ISO 888) — Product grade C — Property classes
• ISO 7412:198414142,IS,,ISO 7412:1984,Hexagon bolts for high-strength structural bolting with large width across flats (short thread length) — Product grade C — Property classes 8.8 and 10.9,"Vi
• ISO 7413:198414144,IS,,ISO 7413:1984,"Hexagon nuts for structural bolting, style 1, hot-dip galvanized (oversize tapped) — Product grades A and B — Property classes 5, 6 and 8","Écrous hexagona
• ISO 7414:198414146,IS,,ISO 7414:1984,"Hexagon nuts for structural bolting with large width across flats, style 1 — Product grade B — Property class 10","Écrous hexagonaux pour constructions mét
• ISO 7415:198414147,IS,,ISO 7415:1984,"Plain washers for high-strength structural bolting, hardened and tempered",Rondelles plates trempées et revenues pour vis à serrage contrôlé pour construct
• ISO 7416:198414148,IS,,ISO 7416:1984,"Plain washers, chamfered, hardened and tempered for high-strength structural bolting",Rondelles plates chanfreinées trempées et revenues pour vis à serrage
• ISO 7417:198414150,IS,,ISO 7417:1984,"Hexagon nuts for structural bolting — Style 2, hot-dip galvanized (oversize tapped) — Product grade A — Property class 9","Écrous hexagonaux galvanisés à c
• ISO 7419:198414153,IS,,ISO 7419:1984,Leisure accommodation vehicles — Ventilation requirements,Véhicules habitables de loisir — Exigences de ventilation,1984-11-01,1,['43.100'],ISO/TC 177,9599,
• ISO 7425-1:198814160,IS,,ISO 7425-1:1988,"Hydraulic fluid power — Housings for elastomer-energized, plastic-faced seals — Dimensions and tolerances — Part 1: Piston seal housings",Transmissions h
• ISO 7425-2:198914161,IS,,ISO 7425-2:1989,"Hydraulic fluid power — Housings for elastomer-energized, plastic-faced seals — Dimensions and tolerances — Part 2: Rod seal housings",Transmissions hydr
• ISO 7432:200233014,IS,,ISO 7432:2002,"Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Test methods to prove the design of locked socket-and-spigot joints, including double-so
• ISO 7432:201865185,IS,,ISO 7432:2018,"Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Test methods to prove the design of locked socket-and-spigot joints, including double-so
• ISO 7434:198314170,IS,,ISO 7434:1983,Slotted set screws with cone point,"Vis sans tête, fendues, à bout pointu",1983-09-01,1,['21.060.10'],ISO/TC 2/SC 11,9599,,[80080],"['en','fr']",3
• ISO 7435:198314171,IS,,ISO 7435:1983,Slotted set screws with long dog point,"Vis sans tête, fendues, à téton long",1983-09-01,1,['21.060.10'],ISO/TC 2/SC 11,9599,,[80081],"['en','fr']",3
• ISO 7436:198314172,IS,,ISO 7436:1983,Slotted set screws with cup point,"Vis sans tête, fendues, à bout cuvette",1983-09-01,1,['21.060.10'],ISO/TC 2/SC 11,9599,,[80082],"['en','fr']",3
• ISO 7438:198514174,IS,,ISO 7438:1985,Metallic materials — Bend test,Matériaux métalliques — Essai de pliage,1985-07-04,1,['77.040.10'],ISO/TC 164/SC 2,9599,"[3737,4398,5378,3735]",[35928],"['en
• ISO 7438:200535928,IS,,ISO 7438:2005,Metallic materials — Bend test,Matériaux métalliques — Essai de pliage,2005-06-20,2,['77.040.10'],ISO/TC 164/SC 2,9599,[14174],[67980],"['en','fr']",8
• ISO 7438:201667980,IS,,ISO 7438:2016,Metallic materials — Bend test,Matériaux métalliques — Essai de pliage,2016-01-04,3,['77.040.10'],ISO/TC 164/SC 2,9599,[35928],[72187],"['en','fr']",8
• ISO 7439:200226775,IS,,ISO 7439:2002,"Copper-bearing intra-uterine contraceptive devices — Requirements, tests","Dispositifs intra-utérins contenant du cuivre — Exigences, essais",2002-03-14,1,
• ISO 7439:201156522,IS,,ISO 7439:2011,Copper-bearing contraceptive intrauterine devices — Requirements and tests,"Dispositifs intra-utérins contenant du cuivre — Exigences, essais",2011-05-27,2,
• ISO 7439:201566174,IS,,ISO 7439:2015,Copper-bearing contraceptive intrauterine devices — Requirements and tests,Dispositifs contraceptifs intra-utérins contenant du cuivre — Exigences et essais
• ISO 7440-1:198514176,IS,,ISO 7440-1:1985,Road vehicles — Fuel injection equipment testing — Part 1: Calibrating nozzle and holder assemblies,Véhicules routiers — Essai des équipements d'injection
• ISO 7440-2:198514178,IS,,ISO 7440-2:1985,Road vehicles — Fuel injection equipment testing — Part 2: Orifice plate flow measurement,Véhicules routiers — Essai des équipements d'injection de combus
• ISO 7441:198414180,IS,,ISO 7441:1984,Corrosion of metals and alloys — Determination of bimetallic corrosion in outdoor exposure corrosion tests,Corrosion des métaux et alliages — Détermination
• ISO 7442:198214181,IS,,ISO 7442:1982,Tyre valves — ISO core chamber No. 1,Valves pour pneumatiques — Logement du mécanisme ISO no 1,1982-10-01,1,['83.160.01'],ISO/TC 31/SC 9,9599,,[34212],"['en
• ISO 7451:198314186,IS,,ISO 7451:1983,Earth-moving machinery — Hydraulic excavators — Hoe type buckets — Volumetric ratings,Engins de terrassement — Godets de pelles hydrauliques travaillant en
• ISO 7451:19971827,IS,,ISO 7451:1997,Earth-moving machinery — Volumetric ratings for hydraulic excavator buckets and backhoe loader buckets,Engins de terrassement — Évaluations volumétriques des
• ISO 7451:1997/Cor 1:199829964,IS,Cor,ISO 7451:1997/Cor 1:1998,Earth-moving machinery — Volumetric ratings for hydraulic excavator buckets and backhoe loader buckets — Technical Corrigendum 1,Engins de ter
• ISO 7452:198414187,IS,,ISO 7452:1984,Hot-rolled structural steel plates — Tolerances on dimensions and shape,Tôles en acier de construction laminées à chaud — Tolérances sur dimensions et forme
• ISO 7452:200236900,IS,,ISO 7452:2002,Hot-rolled structural steel plates — Tolerances on dimensions and shape,Tôles en acier de construction laminées à chaud — Tolérances sur les dimensions et l
• ISO 7457:198314192,IS,,ISO 7457:1983,Earth-moving machinery — Measurement of turning dimensions of wheeled machines,Engins de terrassement — Mesurage des dimensions de braquage des engins à rou
• ISO 7458:198414193,IS,,ISO 7458:1984,Glass containers — Internal pressure resistance — Test methods,Récipients en verre — Résistance à la pression interne — Méthodes d'essai,1984-12-01,1,['55.1
• ISO 7459:198414194,IS,,ISO 7459:1984,Glass containers — Thermal shock resistance and thermal shock endurance — Test methods,Récipients en verre — Résistance au choc thermique et endurance au ch
• ISO 7463:199014198,IS,,ISO 7463:1990,Shipbuilding and marine structures — Symbols for computer applications,Construction navale et structures maritimes — Symboles pour les applications informat
• ISO 7465:198314200,IS,,ISO 7465:1983,Passenger lifts and service lifts — Guide rails for lifts and counterweights — T-type,Ascenseurs et monte-charge — Guides de cabine et de contrepoids — Prof
• ISO 7465:199714201,IS,,ISO 7465:1997,Passenger lifts and service lifts — Guide rails for lifts and counterweights — T-type,Ascenseurs et monte-charge — Guides de cabine et de contrepoids — Prof
• ISO 7465:200131424,IS,,ISO 7465:2001,Passenger lifts and service lifts — Guide rails for lift cars and counterweights — T-type,Ascenseurs et monte-charge — Guides de cabine et de contrepoids —
• ISO 7465:200743008,IS,,ISO 7465:2007,Passenger lifts and service lifts — Guide rails for lift cars and counterweights — T-type,Ascenseurs et monte-charges — Guides de cabine et de contrepoids —
• ISO 7475:198414213,IS,,ISO 7475:1984,Balancing machines — Enclosures and other safety measures,Machines à équilibrer — Enceintes et autres mesures de sécurité,1984-11-01,1,['21.120.40'],ISO/TC
• ISO 7475:1984/Cor 1:199933239,IS,Cor,ISO 7475:1984/Cor 1:1999,Balancing machines — Enclosures and other safety measures — Technical Corrigendum 1,Machines à équilibrer — Enceintes et autres mesures de séc
• ISO 7475:200225813,IS,,ISO 7475:2002,Mechanical vibration — Balancing machines — Enclosures and other protective measures for the measuring station,Vibrations mécaniques — Machines à équilibrer
• ISO 7476:199014214,IS,,ISO 7476:1990,Determination of uranium in uranyl nitrate solutions of nuclear grade quality — Gravimetric method,Détermination de l'uranium dans les solutions de nitrate
• ISO 7479:198214219,IS,,ISO 7479:1982,Textile machinery and accessories — Metal reeds with plastic baulk,Matériel pour l'industrie textile — Peignes métalliques avec ligature plastique,1982-12-0
• ISO 7480:198414220,IS,,ISO 7480:1984,Information processing — Start-stop transmission signal quality at DTE/DCE interfaces,Traitement de l'information — Qualité des signaux de transmission aryt
• ISO 7481:198414222,IS,,ISO 7481:1984,Aerospace — Fasteners — Self-locking nuts with maximum operating temperature less than or equal to 425 degrees C — Test methods,Aéronautique et espace — Élé
• ISO 7481:200014223,IS,,ISO 7481:2000,"Aerospace — Nuts, self-locking, with maximum operating temperature less than or equal to 425 degrees C — Test methods",Aéronautique et espace — Écrous à fr
• ISO 7487-1:198514234,IS,,ISO 7487-1:1985,"Information processing — Data interchange on 130 mm (5.25 in) flexible disk cartridges using modified frequency modulation recording at 7 958 ftprad, 1,9
• ISO 7487-3:198414236,IS,,ISO 7487-3:1984,"Information processing — Data interchange on 130 mm (5.25 in) flexible disk cartridges using modified frequency modulation recording at 7 958 ftprad, 1,9
• ISO 7488:199114239,IS,,ISO 7488:1991,Dental amalgamators,Amalgamateurs dentaires,1991-05-30,1,['11.060.20'],ISO/TC 106/SC 6,9599,,[68818],"['en','fr']",4
• ISO 7489:198614240,IS,,ISO 7489:1986,Dental glass polyalkenoate cements,Ciments dentaires au polyalkénoate de verre,1986-05-15,1,['11.060.10'],ISO/TC 106/SC 1,9599,,[17800],"['en','fr']",10
• ISO 7490:199014241,IS,,ISO 7490:1990,Dental gypsum-bonded casting investments for gold alloys,Revêtements à couler à liant-plâtre dentaire pour les alliages d'or,1990-06-14,1,['11.060.10'],ISO/
• ISO 7490:200024011,IS,,ISO 7490:2000,Dental gypsum-bonded casting investments,Revêtements à couler dentaires à liant-plâtre,2000-12-20,2,['11.060.10'],ISO/TC 106/SC 2,9599,[14241],[37646],"['en
• ISO 7491:198514242,IS,,ISO 7491:1985,Dental materials — Determination of colour stability of dental polymeric materials,Produits dentaires — Détermination de la stabilité de couleur des produit
• ISO 7492:198314243,IS,,ISO 7492:1983,Dental explorers,Sondes exploratrices dentaires,1983-12-01,1,['11.060.20'],ISO/TC 106/SC 4,9599,,[14244],"['en','fr']",3
• ISO 7492:199714244,IS,,ISO 7492:1997,Dental explorers,Sondes exploratrices dentaires,1997-02-13,2,['11.060.20'],ISO/TC 106/SC 4,9599,[14243],[66689],"['en','fr']",15
• ISO 7492:201866689,IS,,ISO 7492:2018,Dentistry — Dental explorer,Médecine bucco-dentaire — Sondes exploratrices dentaires,2018-02-01,3,['11.060.20'],ISO/TC 106/SC 4,9599,[14244],[76995],"['en',
• ISO 7493:198514245,IS,,ISO 7493:1985,Dental operator's stool,Siège d'opérateur dentaire,1985-11-28,1,['11.060.20'],ISO/TC 106/SC 6,9599,,[14246],"['en','fr']",5
• ISO 7493:199714246,IS,,ISO 7493:1997,Dental operator's stool,Siège d'opérateur dentaire,1997-05-01,2,['11.060.20'],ISO/TC 106/SC 6,9599,[14245],[39815],"['en','fr']",7
• ISO 7493:1997/Cor 1:199931409,IS,Cor,ISO 7493:1997/Cor 1:1999,Dental operator's stool — Technical Corrigendum 1,Siège d'opérateur dentaire — Rectificatif technique 1,1999-07-01,2,['11.060.20'],ISO/TC 106/
• ISO 7494-1:200440534,IS,,ISO 7494-1:2004,Dentistry — Dental units — Part 1: General requirements and test methods,Art dentaire — Units dentaires — Partie 1: Exigences et méthodes d'essai générale
• ISO 7494-1:201150324,IS,,ISO 7494-1:2011,Dentistry — Dental units — Part 1: General requirements and test methods,Médecine bucco-dentaire — Units dentaires — Partie 1: Exigences générales et méth
• ISO 7494-2:200333826,IS,,ISO 7494-2:2003,Dentistry — Dental units — Part 2: Water and air supply,Art dentaire — Units dentaires — Partie 2: Alimentation en eau et en air,2003-03-06,1,['11.060.20'
• ISO 7494-2:201559875,IS,,ISO 7494-2:2015,"Dentistry — Stationary dental units — Part 2: Air, water, suction and wastewater systems","Médecine bucco-dentaire — Units dentaires fixes — Partie 2: Sy
• ISO 7494:199014247,IS,,ISO 7494:1990,Dental unit,Unit dentaire,1990-04-05,1,['11.060.20'],ISO/TC 106/SC 6,9599,,[14248],"['en','fr']",9
• ISO 7494:199614248,IS,,ISO 7494:1996,Dental units,Units dentaires,1996-03-07,2,['11.060.20'],ISO/TC 106/SC 6,9599,[14247],"[33826,40534]","['en','fr']",11
• ISO 7495:199014249,IS,,ISO 7495:1990,Wheat flour — Determination of wet gluten content by mechanical means,Farines de blé tendre — Détermination du gluten humide par des moyens mécaniques,1990-
• ISO 7498-3:198914257,IS,,ISO 7498-3:1989,Information processing systems — Open Systems Interconnection — Basic Reference Model — Part 3: Naming and addressing,Systèmes de traitement de l'informat
• ISO 7498:198414252,IS,,ISO 7498:1984,Information processing systems — Open Systems Interconnection — Basic Reference Model,Systèmes de traitement de l'information — Interconnexion des systèmes
• ISO 7498:1984/Cor 1:198814255,IS,Cor,ISO 7498:1984/Cor 1:1988,Information processing systems — Open Systems Interconnection — Basic Reference Model — Technical Corrigendum 1,Systèmes de traitement de l'in
• ISO 7500-1:198614260,IS,,ISO 7500-1:1986,Metallic materials — Verification of static uniaxial testing machines — Part 1: Tensile testing machines,Matériaux métalliques — Vérification des machines
• ISO 7500-1:199928602,IS,,ISO 7500-1:1999,Metallic materials — Verification of static uniaxial testing machines — Part 1: Tension/compression testing machines — Verification and calibration of the
• ISO 7500-1:200434821,IS,,ISO 7500-1:2004,Metallic materials — Verification of static uniaxial testing machines — Part 1: Tension/compression testing machines — Verification and calibration of the
• ISO 7500-1:2004/Cor 1:200851673,IS,Cor,ISO 7500-1:2004/Cor 1:2008,Metallic materials — Verification of static uniaxial testing machines — Part 1: Tension/compression testing machines — Verification and cali
• ISO 7500-1:201562997,IS,,ISO 7500-1:2015,Metallic materials — Calibration and verification of static uniaxial testing machines — Part 1: Tension/compression testing machines — Calibration and ver
• ISO 7500-2:199614261,IS,,ISO 7500-2:1996,Metallic materials — Verification of static uniaxial testing machines — Part 2: Tension creep testing machines — Verification of the applied load,Matériau
• ISO 7503-1:198814265,IS,,ISO 7503-1:1988,"Evaluation of surface contamination — Part 1: Beta-emitters (maximum beta energy greater than 0,15 MeV) and alpha-emitters","Évaluation de la contaminati
• ISO 7503-2:198814266,IS,,ISO 7503-2:1988,Evaluation of surface contamination — Part 2: Tritium surface contamination,Évaluation de la contamination de surface — Partie 2: Contamination de surface
• ISO 7503-3:19962634,IS,,ISO 7503-3:1996,"Evaluation of surface contamination — Part 3: Isomeric transition and electron capture emitters, low energy beta-emitters (E bêtamax less than 0,15 MeV)",
• ISO 7504:198414267,IS,,ISO 7504:1984,Gas analysis — Vocabulary,Analyse des gaz — Vocabulaire,1984-09-01,1,"['71.040.40','01.040.71']",ISO/TC 158,9599,,[24662],"['en','fr']",27

← records 8,401–8,800 · All of Withdrawn and superseded ISO standards · records 9,201 on →