Records 9,201–9,600 — Withdrawn and superseded ISO standards

Records 9,201 to 9,600 of 24,640. Each links to its own page, which carries the source URL and the quoted line that states the value.

• ISO 7504:200124662,IS,,ISO 7504:2001,Gas analysis — Vocabulary,Analyse des gaz — Vocabulaire,2001-11-22,2,"['71.040.40','01.040.71']",ISO/TC 158,9599,[14267],[53596],"['en','fr']",27
• ISO 7505:198614268,IS,,ISO 7505:1986,Forestry machinery — Chain saws — Measurement of hand-transmitted vibration,Machines forestières — Scies à chaîne — Mesurage des vibrations transmises aux m
• ISO 7507-1:199314270,IS,,ISO 7507-1:1993,Petroleum and liquid petroleum products — Calibration of vertical cylindrical tanks — Part 1: Strapping method,Pétrole et produits pétroliers liquides — J
• ISO 7507-2:199314271,IS,,ISO 7507-2:1993,Petroleum and liquid petroleum products — Calibration of vertical cylindrical tanks — Part 2: Optical-reference-line method,Pétrole et produits pétroliers
• ISO 7507-2:200538912,IS,,ISO 7507-2:2005,Petroleum and liquid petroleum products — Calibration of vertical cylindrical tanks — Part 2: Optical-reference-line method,Pétrole et produits pétroliers
• ISO 7507-3:199314272,IS,,ISO 7507-3:1993,Petroleum and liquid petroleum products — Calibration of vertical cylindrical tanks — Part 3: Optical-triangulation method,Pétrole et produits pétroliers
• ISO 7507-4:199514274,IS,,ISO 7507-4:1995,Petroleum and liquid petroleum products — Calibration of vertical cylindrical tanks — Part 4: Internal electro-optical distance-ranging method,Pétrole et
• ISO 7509:200014276,IS,,ISO 7509:2000,Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes — Determination of time to failure under sustained internal pressure,Systèmes
• ISO 7510:199714277,IS,,ISO 7510:1997,Plastics piping systems — Glass-reinforced plastics (GRP) components — Determination of the amounts of constituents using the gravimetric method,Systèmes de
• ISO 7519:199114288,IS,,ISO 7519:1991,Technical drawings — Construction drawings — General principles of presentation for general arrangement and assembly drawings,Dessins techniques — Dessins d
• ISO 7519:202483163,IS,,ISO 7519:2024,Technical product documentation (TPD) — Construction documentation — General principles of presentation for general arrangement and assembly drawings,Docume
• ISO 7524:198514293,IS,,ISO 7524:1985,"Nickel, ferronickel and nickel alloys — Determination of carbon content — Infra-red absorption method after induction furnace combustion","Nickel, ferro-ni
• ISO 7526:198514295,IS,,ISO 7526:1985,"Nickel, ferronickel and nickel alloys — Determination of sulfur content — Infra-red absorption method after induction furnace combustion","Nickel, ferro-ni
• ISO 7529:198914298,IS,,ISO 7529:1989,Nickel alloys — Determination of chromium content — Potentiometric titration method with ammonium iron(II) sulfate,Alliages de nickel — Dosage du chrome — M
• ISO 7530-1:199014299,IS,,ISO 7530-1:1990,Nickel alloys — Flame atomic absorption spectrometric analysis — Part 1: General requirements and sample dissolution,Alliages de nickel — Analyse par spec
• ISO 7530-2:199014300,IS,,ISO 7530-2:1990,Nickel alloys — Flame atomic absorption spectrometric analysis — Part 2: Determination of cobalt content,Alliages de nickel — Analyse par spectrométrie d'
• ISO 7530-3:199014301,IS,,ISO 7530-3:1990,Nickel alloys — Flame atomic absorption spectrometric analysis — Part 3: Determination of chromium content,Alliages de nickel — Analyse par spectrométrie
• ISO 7530-4:199014302,IS,,ISO 7530-4:1990,Nickel alloys — Flame atomic absorption spectrometric analysis — Part 4: Determination of copper content,Alliages de nickel — Analyse par spectrométrie d'
• ISO 7530-5:199014303,IS,,ISO 7530-5:1990,Nickel alloys — Flame atomic absorption spectrometric analysis — Part 5: Determination of iron content,Alliages de nickel — Analyse par spectrométrie d'ab
• ISO 7530-6:199014304,IS,,ISO 7530-6:1990,Nickel alloys — Flame atomic absorption spectrometric analysis — Part 6: Determination of manganese content,Alliages de nickel — Analyse par spectrométrie
• ISO 7532:198514309,IS,,ISO 7532:1985,Instant coffee — Size analysis,Café soluble — Analyse granulométrique,1985-10-31,1,['67.140.20'],ISO/TC 34/SC 15,9599,,[26856],"['en','fr']",2
• ISO 7534:198514310,IS,,ISO 7534:1985,Instant coffee — Determination of insoluble matter content,Café soluble — Détermination des matières insolubles,1985-11-07,1,['67.140.20'],ISO/TC 34/SC 15,9
• ISO 7537:198914313,IS,,ISO 7537:1989,Petroleum products — Determination of total acid number — Semi-micro colour-indicator titration method,Produits pétroliers — Détermination de l'indice d'aci
• ISO 7539-1:198714314,IS,,ISO 7539-1:1987,Corrosion of metals and alloys — Stress corrosion testing — Part 1: General guidance on testing procedures,Corrosion des métaux et alliages — Essais de co
• ISO 7539-6:198914319,IS,,ISO 7539-6:1989,Corrosion of metals and alloys — Stress corrosion testing — Part 6: Preparation and use of pre-cracked specimens,Corrosion des métaux et alliages — Essais
• ISO 7539-6:200337001,IS,,ISO 7539-6:2003,Corrosion of metals and alloys — Stress corrosion testing — Part 6: Preparation and use of pre-cracked specimens for tests under constant load or constant
• ISO 7539-6:201157621,IS,,ISO 7539-6:2011,Corrosion of metals and alloys — Stress corrosion testing — Part 6: Preparation and use of precracked specimens for tests under constant load or constant
• ISO 7539-7:198914320,IS,,ISO 7539-7:1989,Corrosion of metals and alloys — Stress corrosion testing — Part 7: Slow strain rate testing,Corrosion des métaux et alliages — Essais de corrosion sous c
• ISO 7539-9:200320991,IS,,ISO 7539-9:2003,Corrosion of metals and alloys — Stress corrosion testing — Part 9: Preparation and use of pre-cracked specimens for tests under rising load or rising dis
• ISO 7539-10:201355856,IS,,ISO 7539-10:2013,Corrosion of metals and alloys — Stress corrosion testing — Part 10: Reverse U-bend method,Corrosion des métaux et alliages — Essais de corrosion sous co
• ISO 7540:198414322,IS,,ISO 7540:1984,Ground (powdered) paprika (Capsicum annuum Linnaeus) — Specification,Paprika (Capsicum annuum Linnaeus) en poudre — Spécifications,1984-12-01,1,['67.220.10'
• ISO 7540:200639054,IS,,ISO 7540:2006,Ground paprika (Capsicum annuum L.) — Specification,Paprika (Capsicum annuum L.) en poudre — Spécifications,2006-10-23,2,['67.220.10'],ISO/TC 34/SC 7,9599,
• ISO 7541:198914324,IS,,ISO 7541:1989,Ground (powdered) paprika — Determination of total natural colouring matter content,Epices — Paprika en poudre — Détermination de la teneur en matières colo
• ISO 7547:198514331,IS,,ISO 7547:1985,Air-conditioning and ventilation of accommodation spaces on board ships — Design conditions and basis of calculations,Conditionnement d'air et ventilation d
• ISO 7547:200227017,IS,,ISO 7547:2002,Ships and marine technology — Air-conditioning and ventilation of accommodation spaces — Design conditions and basis of calculations,Navires et technologie
• ISO 7547:2002/Cor 1:200852280,IS,Cor,ISO 7547:2002/Cor 1:2008,Ships and marine technology — Air-conditioning and ventilation of accommodation spaces — Design conditions and basis of calculations — Technic
• ISO 7551:199614335,IS,,ISO 7551:1996,Dental absorbent points,Cônes absorbants à usage dentaire,1996-12-12,1,['11.060.10'],ISO/TC 106/SC 1,9599,,[80109],"['en','fr']",7
• ISO 7560:198314342,IS,,ISO 7560:1983,Cucumbers — Guide to storage and refrigerated transport,Concombres — Guide pour l'entreposage et le transport réfrigérés,1983-10-01,1,['67.080.20'],ISO/TC 3
• ISO 7566:198714349,IS,,ISO 7566:1987,Acoustics — Standard reference zero for the calibration of pure-tone bone conduction audiometers,Acoustique — Zéro normal de référence pour l'étalonnage des
• ISO 7572:198414355,IS,,ISO 7572:1984,Conditions of acceptance and installation for work-holding fixed tables of machine tools,Conditions de réception et d'installation des taques porte-pièces p
• ISO 7573:198314356,IS,,ISO 7573:1983,Technical drawings — Item lists,Dessins techniques — Nomenclatures de définition,1983-10-01,1,['01.100.01'],ISO/TC 10/SC 1,9599,,"[33259,26948,43883]","['en
• ISO 7575:198414361,IS,,ISO 7575:1984,Road vehicles — Wheels for commercial vehicles — Flat attachment — Fixing nuts,Véhicules routiers — Roues pour véhicules utilitaires — Attache plate — Écrou
• ISO 7576:198214363,IS,,ISO 7576:1982,Road vehicles — Heads for two-stage fuel filters for compression ignition engines — Mounting and connecting dimensions,Véhicules routiers — Têtes pour filtr
• ISO 7578:198214366,IS,,ISO 7578:1982,"Road vehicles — Glow plugs, sheath type — General requirements and test methods",Véhicules routiers — Bougies de préchauffage du type à fourreau — Caractér
• ISO 7578:198614367,IS,,ISO 7578:1986,Road vehicles — Sheath-type glow-plugs — General requirements and test methods,Véhicules routiers — Bougies de préchauffage du type à fourreau — Caractérist
• ISO 7578:200129434,IS,,ISO 7578:2001,Road vehicles — Sheath-type glow-plugs — General requirements and test methods,Véhicules routiers — Bougies de préchauffage du type à fourreau — Exigences g
• ISO 7578:200843934,IS,,ISO 7578:2008,Road vehicles — Sheath-type glow-plugs — General requirements and test methods,Véhicules routiers — Bougies de préchauffage du type à fourreau — Exigences g
• ISO 7579:199014368,IS,,ISO 7579:1990,Dyestuffs — Determination of solubility in organic solvents — Gravimetric method,Colorants — Détermination de la solubilité dans les solvants organiques — M
• ISO 7583:198614370,IS,,ISO 7583:1986,Anodizing of aluminium and its alloys — Vocabulary,Anodisation de l'aluminium et de ses alliages — Vocabulaire,1986-11-20,1,"['25.220.20','01.040.25']",ISO/
• ISO 7588:198314375,IS,,ISO 7588:1983,Road vehicles — Relays and flashers — Mounting and positioning dimensions of male tabs and socket apertures for relays and flashers,Véhicules routiers — Rel
• ISO 7589:198414377,IS,,ISO 7589:1984,Photography — Illuminants for sensitometry — Specifications for daylight and incandescent tungsten,Photographie — Illuminants sensitométriques — Spécificati
• ISO 7590:198814378,IS,,ISO 7590:1988,Steel cord conveyor belts — Cover thickness measurement,Courroies transporteuses à câbles d'acier — Mesurage de l'épaisseur des revêtements,1988-08-18,2,['5
• ISO 7590:199014379,IS,,ISO 7590:1990,Steel cord conveyor belts — Cover thickness measurement,Courroies transporteuses à câbles d'acier — Mesurage de l'épaisseur des revêtements,1990-09-06,3,['5
• ISO 7590:200122090,IS,,ISO 7590:2001,Steel cord conveyor belts — Methods for the determination of total thickness and cover thickness,Courroies transporteuses à câbles d'acier — Méthodes de dét
• ISO 7590:200945313,IS,,ISO 7590:2009,Steel cord conveyor belts — Methods for the determination of total thickness and cover thickness,Courroies transporteuses à câbles d'acier — Méthodes de dét
• ISO 7595:198414383,IS,,ISO 7595:1984,Socketing procedures for wire ropes — Molten metal socketing,Procédés de terminaison des câbles métalliques — Manchonnage à l'aide de métal fondu,1984-10-01
• ISO 7597:198714385,IS,,ISO 7597:1987,Forged steel lifting hooks with point and eye for use with steel chains of grade T(8),Crochets de levage forgés en acier à bec et à oeil destinés à être uti
• ISO 7598:198214386,IS,,ISO 7598:1982,Stainless steel tubes suitable for screwing in accordance with ISO 7/1,Tubes en acier inoxydable filetables selon l'ISO 7/1,1982-11-01,1,['23.040.10'],ISO/T
• ISO 7598:1982/Amd 1:198414388,IS,Amd,ISO 7598:1982/Amd 1:1984,Stainless steel tubes suitable for screwing in accordance with ISO 7/1 — Amendment 1,Tubes en acier inoxydable filetables selon l'ISO 7/1 — Am
• ISO 7599:198314389,IS,,ISO 7599:1983,Anodizing of aluminium and its alloys — General specifications for anodic oxide coatings on aluminium,Anodisation de l'aluminium et de ses alliages — Spécif
• ISO 7599:201046061,IS,,ISO 7599:2010,Anodizing of aluminium and its alloys — General specifications for anodic oxidation coatings on aluminium,Anodisation de l'aluminium et de ses alliages — Sp
• ISO 7610:198514398,IS,,ISO 7610:1985,Oil of sandalwood — Determination of santalols content (in the form of their trimethylsilyl derivative) — Gas chromatographic method on capillary columns,Hu
• ISO 7611:198514399,IS,,ISO 7611:1985,"Oils of lemon and petitgrain citronnier, and oil of lime obtained by a mechanical process — Determination of citral (neral + geranial) content — Gas chroma
• ISO 7612:198314401,IS,,ISO 7612:1983,Base mounted in-line fuel injection pumps,Pompes d'injection en ligne à fixation par base plane,1983-07-01,1,['43.060.40'],ISO/TC 22,9599,,[22736],"['en','f
• ISO 7612:199422736,IS,,ISO 7612:1994,Diesel engines — Base-mounted in-line fuel injection pumps — Mounting dimensions,Moteurs diesels — Pompes d'injection en ligne à fixation par base plane — D
• ISO 7612:200634824,IS,,ISO 7612:2006,Diesel engines — Base-mounted in-line fuel injection pumps and high-pressure supply pumps for common rail fuel injection systems — Mounting dimensions,Moteu
• ISO 7612:200951565,IS,,ISO 7612:2009,Diesel engines — Base-mounted in-line fuel injection pumps and high-pressure supply pumps for common rail fuel injection systems — Mounting dimensions,Moteu
• ISO 7617-1:198814407,IS,,ISO 7617-1:1988,Plastics-coated fabrics for upholstery — Part 1: Specification for PVC-coated knitted fabrics,Supports textiles revêtus de plastique pour ameublement et g
• ISO 7617-1:199422508,IS,,ISO 7617-1:1994,Plastics-coated fabrics for upholstery — Part 1: Specification for PVC-coated knitted fabrics,Supports textiles revêtus de plastique pour ameublement et g
• ISO 7617-1:200123794,IS,,ISO 7617-1:2001,Plastics-coated fabrics for upholstery — Part 1: Specification for PVC-coated knitted fabrics,Supports textiles revêtus de plastique pour ameublement et g
• ISO 7617-2:198814408,IS,,ISO 7617-2:1988,Plastics-coated fabrics for upholstery — Part 2: Specification for PVC-coated woven fabrics,Supports textiles revêtus de plastique pour ameublement et gar
• ISO 7617-2:199422509,IS,,ISO 7617-2:1994,Plastics-coated fabrics for upholstery — Part 2: Specification for PVC-coated woven fabrics,Supports textiles revêtus de plastique pour ameublement et gar
• ISO 7617-2:200337012,IS,,ISO 7617-2:2003,Plastics-coated fabrics for upholstery — Part 2: Specification for PVC-coated woven fabrics,Supports textiles revêtus de plastique pour ameublement et gar
• ISO 7619-1:200431078,IS,,ISO 7619-1:2004,"Rubber, vulcanized or thermoplastic — Determination of indentation hardness — Part 1: Durometer method (Shore hardness)",Caoutchouc vulcanisé ou thermopl
• ISO 7619-1:2004/Amd 1:200844397,IS,Amd,ISO 7619-1:2004/Amd 1:2008,"Rubber, vulcanized or thermoplastic — Determination of indentation hardness — Part 1: Durometer method (Shore hardness) — Amendment 1: Prec
• ISO 7619-1:201050756,IS,,ISO 7619-1:2010,"Rubber, vulcanized or thermoplastic — Determination of indentation hardness — Part 1: Durometer method (Shore hardness)",Caoutchouc vulcanisé ou thermopl
• ISO 7619-2:200437309,IS,,ISO 7619-2:2004,"Rubber, vulcanized or thermoplastic — Determination of indentation hardness — Part 2: IRHD pocket meter method",Caoutchouc vulcanisé ou thermoplastique —
• ISO 7619-2:201050757,IS,,ISO 7619-2:2010,"Rubber, vulcanized or thermoplastic — Determination of indentation hardness — Part 2: IRHD pocket meter method",Caoutchouc vulcanisé ou thermoplastique —
• ISO 7619:198614411,IS,,ISO 7619:1986,Rubber — Determination of indentation hardness by means of pocket hardness meters,Caoutchouc — Détermination de la dureté par pénétration au moyen d'un duro
• ISO 7619:199720170,IS,,ISO 7619:1997,Rubber — Determination of indentation hardness by means of pocket hardness meters,Caoutchouc — Détermination de la dureté par pénétration au moyen d'un duro
• ISO 7622-1:198414414,IS,,ISO 7622-1:1984,Steel cord conveyor belts — Longitudinal traction test — Part 1: Measurement of elongation,Courroies transporteuses à câbles d'acier — Essai de traction d
• ISO 7622-2:198414415,IS,,ISO 7622-2:1984,Steel cord conveyor belts — Longitudinal traction test — Part 2: Measurement of tensile strength,Courroies transporteuses à câbles d'acier — Essai de trac
• ISO 7622-2:201561037,IS,,ISO 7622-2:2015,Steel cord conveyor belts — Longitudinal traction test — Part 2: Measurement of tensile strength,Courroies transporteuses à câbles d'acier — Essai de trac
• ISO 7623:198414416,IS,,ISO 7623:1984,Steel cord conveyor belts — Cord-to-coating bond test,Courroies transporteuses à câbles d'acier — Essai d'adhérence des câbles dans l'enrobage,1984-12-01,1,
• ISO 7623:199614417,IS,,ISO 7623:1996,Steel cord conveyor belts — Cord-to-coating bond test — Initial test and after thermal treatment,Courroies transporteuses à câbles d'acier — Adhérence des c
• ISO 7623:201565573,IS,,ISO 7623:2015,Steel cord conveyor belts — Cord-to-coating bond test — Initial test and after thermal treatment,Courroies transporteuses à câbles d'acier — Adhérence des c
• ISO 7625:198314419,IS,,ISO 7625:1983,"Sintered metal materials, excluding hardmetals — Preparation of samples for chemical analysis for determination of carbon content","Matériaux métalliques f
• ISO 7625:200633550,IS,,ISO 7625:2006,"Sintered metal materials, excluding hardmetals — Preparation of samples for chemical analysis for determination of carbon content","Matériaux métalliques f
• ISO 7626-1:198614420,IS,,ISO 7626-1:1986,Vibration and shock — Experimental determination of mechanical mobility — Part 1: Basic definitions and transducers,Vibrations et chocs — Détermination ex
• ISO 7626-2:199014421,IS,,ISO 7626-2:1990,Vibration and shock — Experimental determination of mechanical mobility — Part 2: Measurements using single-point translation excitation with an attached
• ISO 7626-5:199414424,IS,,ISO 7626-5:1994,Vibration and shock — Experimental determination of mechanical mobility — Part 5: Measurements using impact excitation with an exciter which is not attach
• ISO 7628-1:198514433,IS,,ISO 7628-1:1985,Road vehicles — Thermoplastic tubing for use in air braking systems — Part 1: Dimensions and marking,Véhicules routiers — Tuyauteries thermoplastiques pou
• ISO 7628-1:199814434,IS,,ISO 7628-1:1998,Road vehicles — Thermoplastics tubing for air braking systems — Part 1: Dimensions and marking,Véhicules routiers — Tuyauteries thermoplastiques pour disp
• ISO 7628-2:199814436,IS,,ISO 7628-2:1998,Road vehicles — Thermoplastics tubing for air braking systems — Part 2: Mounting on vehicle and test methods,Véhicules routiers — Tuyauteries thermoplasti
• ISO 7628-2:1998/Cor 1:199931314,IS,Cor,ISO 7628-2:1998/Cor 1:1999,Road vehicles — Thermoplastics tubing for air braking systems — Part 2: Mounting on vehicle and test methods — Technical Corrigendum 1,Véhic
• ISO 7634:199514442,IS,,ISO 7634:1995,Towed road vehicles — Compressed-air braking systems — Measurement of braking performance,Véhicules routiers remorqués — Dispositifs de freinage à air compr
• ISO 7634:200327127,IS,,ISO 7634:2003,Road vehicles — Compressed-air braking systems — Test procedures,Véhicules routiers — Dispositifs de freinage à air comprimé — Modes opératoires d'essai,200
• ISO 7635:199114443,IS,,ISO 7635:1991,Road vehicles — Air or air over hydraulic braking systems — Measurement of braking performance,Véhicules routiers — Dispositifs de freinage à transmission p
• ISO 7635:200327125,IS,,ISO 7635:2003,Road vehicles — Air or air-over hydraulic braking systems for motor vehicles (including those with electronic control functions) — Test procedures,Véhicules
• ISO 7637-0:199014446,IS,,ISO 7637-0:1990,Road vehicles — Electrical disturbance by conduction and coupling — Part 0: Definitions and general,Véhicules routiers — Perturbations électriques par con
• ISO 7637-1:199014448,IS,,ISO 7637-1:1990,Road vehicles — Electrical disturbance by conduction and coupling — Part 1: Passenger cars and light commercial vehicles with nominal 12 V supply voltage
• ISO 7637-1:200228534,IS,,ISO 7637-1:2002,Road vehicles — Electrical disturbances from conduction and coupling — Part 1: Definitions and general considerations,Véhicules routiers — Perturbations é
• ISO 7637-1:2002/Amd 1:200845930,IS,Amd,ISO 7637-1:2002/Amd 1:2008,Road vehicles — Electrical disturbances from conduction and coupling — Part 1: Definitions and general considerations — Amendment 1,Véhicule
• ISO 7637-1:201563098,IS,,ISO 7637-1:2015,Road vehicles — Electrical disturbances from conduction and coupling — Part 1: Definitions and general considerations,Véhicules routiers — Perturbations é
• ISO 7637-2:199014449,IS,,ISO 7637-2:1990,Road vehicles — Electrical disturbance by conduction and coupling — Part 2: Commercial vehicles with nominal 24 V supply voltage — Electrical transient co
• ISO 7637-2:200428533,IS,,ISO 7637-2:2004,Road vehicles — Electrical disturbances from conduction and coupling — Part 2: Electrical transient conduction along supply lines only,Véhicules routiers
• ISO 7637-2:2004/Amd 1:200845931,IS,Amd,ISO 7637-2:2004/Amd 1:2008,Road vehicles — Electrical disturbances from conduction and coupling — Part 2: Electrical transient conduction along supply lines only — Ame
• ISO 7637-3:199514450,IS,,ISO 7637-3:1995,Road vehicles — Electrical disturbance by conduction and coupling — Part 3: Vehicles with nominal 12 V or 24 V supply voltage — Electrical transient trans
• ISO 7637-3:1995/Cor 1:199526421,IS,Cor,ISO 7637-3:1995/Cor 1:1995,Road vehicles — Electrical disturbance by conduction and coupling — Part 3: Vehicles with nominal 12 V or 24 V supply voltage — Electrical t
• ISO 7637-3:200740581,IS,,ISO 7637-3:2007,Road vehicles — Electrical disturbances from conduction and coupling — Part 3: Electrical transient transmission by capacitive and inductive coupling via
• ISO 7638-1:199721340,IS,,ISO 7638-1:1997,Road vehicles — Electrical connectors for braking systems — Part 1: Connectors for 24 V nominal supply voltage,Véhicules routiers — Connecteurs électrique
• ISO 7638-1:1997/Cor 1:199830374,IS,Cor,ISO 7638-1:1997/Cor 1:1998,Road vehicles — Electrical connectors for braking systems — Part 1: Connectors for 24 V nominal supply voltage — Technical Corrigendum 1,Véh
• ISO 7638-1:200330209,IS,,ISO 7638-1:2003,Road vehicles — Connectors for the electrical connection of towing and towed vehicles — Part 1: Connectors for braking systems and running gear of vehicle
• ISO 7638-2:199725682,IS,,ISO 7638-2:1997,Road vehicles — Electrical connectors for braking systems — Part 2: Connectors for 12 V nominal supply voltage,Véhicules routiers — Connecteurs électrique
• ISO 7638-2:1997/Cor 1:199830375,IS,Cor,ISO 7638-2:1997/Cor 1:1998,Road vehicles — Electrical connectors for braking systems — Part 2: Connectors for 12 V nominal supply voltage — Technical Corrigendum 1,Véh
• ISO 7638-2:200330208,IS,,ISO 7638-2:2003,Road vehicles — Connectors for the electrical connection of towing and towed vehicles — Part 2: Connectors for braking systems and running gear of vehicle
• ISO 7638:198514453,IS,,ISO 7638:1985,Road vehicles — Brake anti-lock device connector,Véhicules routiers — Prise pour dispositif d'antiblocage du frein,1985-02-07,1,"['43.040.10','43.040.40']",
• ISO 7641-1:198314456,IS,,ISO 7641-1:1983,Road vehicles — Caravans and light trailers — Calculation of the mechanical strength of the drawbar — Part 1: Steel drawbars,Véhicules routiers — Caravan
• ISO 7642:198314457,IS,,ISO 7642:1983,Road vehicles — Caravans and light trailers — Trailers of categories 01 and 02 — Inertia bench test procedures for overrun brakes,Véhicules routiers — Carav
• ISO 7643:198314459,IS,,ISO 7643:1983,Road vehicles — Caravans and light trailers — Bench test methods for brake controls for inertia braked trailers of categories 01 and 02,Véhicules routiers —
• ISO 7654:198314473,IS,,ISO 7654:1983,Compression ignition engines — Spin-on fuel filters — Mounting and connecting dimensions,Moteurs à combustion interne à allumage par compression — Filtres à
• ISO 7654:199114474,IS,,ISO 7654:1991,Road vehicles — Spin-on fuel filters for compression-ignition engines — Mounting and connecting dimensions,Véhicules routiers — Filtres à combustible vissés
• ISO 7657:198414476,IS,,ISO 7657:1984,Pipework — Stripwound flexible metal hoses — Specifications and temperature-related requirements for use,Tuyauterie — Tuyaux métalliques flexibles agrafés —
• ISO 7657:199522837,IS,,ISO 7657:1995,Pipework — General requirements for stripwound flexible metal hoses,Tuyauteries — Exigences générales pour tuyaux métalliques flexibles agrafés,1995-01-26,2
• ISO 7658:198414477,IS,,ISO 7658:1984,Pipework — Stripwound flexible metal hoses — Testing and verification of characteristics,Tuyauterie — Tuyaux métalliques flexibles agrafés — Essais et vérif
• ISO 7661:198414480,IS,,ISO 7661:1984,Aerospace — Fluid systems — Clamp blocks for tube lines having axial alignment — Design standard and qualification testing — Metric series,Aéronautique et e
• ISO 7663:198514482,IS,,ISO 7663:1985,"Rubber, halogenated isobutene-isoprene (BIIR and CIIR) — Test recipe and evaluation of vulcanization characteristics",Caoutchouc isobutène-isoprène halogén
• ISO 7663:199414483,IS,,ISO 7663:1994,"Rubber, halogenated isobutene-isoprene (BIIR and CIIR) — Evaluation procedure",Caoutchoucs isobutène-isoprène halogénés (BIIR et CIIR) — Méthode d'évaluati
• ISO 7663:199521889,IS,,ISO 7663:1995,Halogenated isobutene-isoprene rubber (BIIR and CIIR) — Evaluation procedures,Caoutchoucs isobutène-isoprène halogénés (BIIR et CIIR) — Méthodes d'évaluatio
• ISO 7663:200535178,IS,,ISO 7663:2005,Halogenated isobutene-isoprene rubber (BIIR and CIIR) — Evaluation procedures,Caoutchoucs isobutène-isoprène halogénés (BIIR et CIIR) — Méthodes d'évaluatio
• ISO 7668:198614487,IS,,ISO 7668:1986,"Anodized aluminium and aluminium alloys — Measurement of specular reflectance and specular gloss at angles of 20 degrees, 45 degrees, 60 degrees or 85 degr
• ISO 7668:201051493,IS,,ISO 7668:2010,"Anodizing of aluminium and its alloys — Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20 degrees, 45 deg
• ISO 7668:201872810,IS,,ISO 7668:2018,"Anodizing of aluminium and its alloys — Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20 degrees, 45 deg
• ISO 7671:199114490,IS,,ISO 7671:1991,Polypropylene (PP) pipes and fittings (jointed by means of elastomeric sealing rings) for soil and waste discharge (low and high temperature) systems inside
• ISO 7675:199114494,IS,,ISO 7675:1991,Chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings for soil and waste discharge (low and high temperature) systems inside buildings — Specification
• ISO 7682:199114501,IS,,ISO 7682:1991,Acrylonitrile/butadiene/styrene (ABS) pipes and fittings for soil and waste discharge (low and high temperature) systems inside buildings — Specifications,T
• ISO 7684:199714503,IS,,ISO 7684:1997,Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes — Determination of the creep factor under dry conditions,Systèmes de canalisat
• ISO 7685:199814504,IS,,ISO 7685:1998,Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes — Determination of initial specific ring stiffness,Systèmes de canalisation en
• ISO 7685:201971168,IS,,ISO 7685:2019,Glass-reinforced thermosetting plastics (GRP) pipes — Determination of initial ring stiffness,Tubes en plastiques thermodurcissables renforcés de verre (PRV
• ISO 7686:199214505,IS,,ISO 7686:1992,Plastics pipes and fittings — Opacity — Test method,Tubes et raccords en matières plastiques — Opacité — Méthode d'essai,1992-06-18,1,"['23.040.45','23.040.
• ISO 7689:198814508,IS,,ISO 7689:1988,Aerospace — Alloy steel bolts with strength classification 1 100 MPa and MJ threads — Procurement specification,"Aéronautique et espace — Vis en acier allié
• ISO 7689:200841818,IS,,ISO 7689:2008,"Aerospace — Bolts, with MJ threads, made of alloy steel, strength class 1 100 MPa — Procurement specification","Aéronautique et espace — Vis à filetages MJ
• ISO 7692:198314511,IS,,ISO 7692:1983,Ferrotitanium — Determination of titanium content — Titrimetric method,Ferro-titane — Dosage du titane — Méthode titrimétrique,1983-12-01,1,['77.100'],ISO/T
• ISO 7698:199014517,IS,,ISO 7698:1990,"Cereals, pulses and derived products — Enumeration of bacteria, yeasts and moulds","Céréales, légumineuses et produits dérivés — Dénombrement des bactéries
• ISO 7700-1:198414519,IS,,ISO 7700-1:1984,Check of the calibration of moisture meters — Part 1: Moisture meters for cereals,Contrôle d'étalonnage des humidimètres — Partie 1: Humidimètres pour cér
• ISO 7700-2:198714520,IS,,ISO 7700-2:1987,Check of the calibration of moisture meters — Part 2: Moisture meters for oilseeds,Contrôle d'étalonnage des humidimètres — Partie 2: Humidimètres pour gr
• ISO 7701:198614521,IS,,ISO 7701:1986,Dried apples — Specification,Pommes séchées — Spécifications,1986-10-02,1,['67.080.10'],ISO/TC 34,9599,,[14522],"['en','fr']",6
• ISO 7702:198614523,IS,,ISO 7702:1986,Dried pears — Specification,Poires séchées — Spécifications,1986-10-02,1,['67.080.10'],ISO/TC 34,9599,,[14524],"['en','fr']",6
• ISO 7703:198614525,IS,,ISO 7703:1986,Dried peaches — Specification,Pêches séchées — Spécifications,1986-09-25,1,['67.080.10'],ISO/TC 34,9599,,[14526],"['en','fr']",6
• ISO 7704:198514527,IS,,ISO 7704:1985,Water quality — Evaluation of membrane filters used for microbiological analyses,Qualité de l'eau — Évaluation des membranes filtrantes utilisées pour des a
• ISO 7706:198514531,IS,,ISO 7706:1985,Road vehicles — Commercial vehicles — Clearance envelope for power take-offs (PTO),Véhicules routiers — Véhicules utilitaires — Volumes de dégagement de mon
• ISO 7711-1:199721259,IS,,ISO 7711-1:1997,"Dental rotary instruments — Diamond instruments — Part 1: Dimensions, requirements, marking and packaging","Instruments rotatifs dentaires — Instruments
• ISO 7711-1:1997/Amd 1:200944003,IS,Amd,ISO 7711-1:1997/Amd 1:2009,"Dental rotary instruments — Diamond instruments — Part 1: Dimensions, requirements, marking and packaging — Amendment 1","Instruments rotat
• ISO 7711-2:199214538,IS,,ISO 7711-2:1992,Dental rotary instruments — Diamond instruments — Part 2: Discs,Instruments rotatifs dentaires — Instruments diamantés — Partie 2: Disques,1992-12-10,1,['
• ISO 7711-3:199214539,IS,,ISO 7711-3:1992,"Dental rotary instruments — Diamond instruments — Part 3: Grit sizes, designation and colour code","Instruments rotatifs dentaires — Instruments diamanté
• ISO 7711-3:200437701,IS,,ISO 7711-3:2004,"Dentistry — Diamond rotary instruments — Part 3: Grit sizes, designation and colour code","Art dentaire — Instruments rotatifs diamantés — Partie 3: Tail
• ISO 7711:198414537,IS,,ISO 7711:1984,Dental rotary instruments — Diamond instruments,Instruments rotatifs dentaires — Instruments diamantés,1984-12-01,1,['11.060.20'],ISO/TC 106/SC 4,9599,,[212
• ISO 7714:198514542,IS,,ISO 7714:1985,Irrigation equipment — Volumetric valves — General requirements and test methods,Matériel agricole d'irrigation — Vannes volumétriques — Exigences générales
• ISO 7714:199514543,IS,,ISO 7714:1995,Agricultural irrigation equipment — Volumetric valves — General requirements and test methods,Matériel agricole d'irrigation — Vannes volumétriques — Exigen
• ISO 7714:200026517,IS,,ISO 7714:2000,Agricultural irrigation equipment — Volumetric valves — General requirements and test methods,Matériel agricole d'irrigation — Vannes volumétriques — Exigen
• ISO 7714:200843991,IS,,ISO 7714:2008,Agricultural irrigation equipment — Volumetric valves — General requirements and test methods,Matériel agricole d'irrigation — Vannes volumétriques — Exigen
• ISO 7718-1:200944367,IS,,ISO 7718-1:2009,Aircraft — Passenger doors interface requirements for connection of passenger boarding bridge — Part 1: Main deck doors,Aéronefs — Exigences d'interface d
• ISO 7718-1:201671422,IS,,ISO 7718-1:2016,Aircraft — Passenger doors interface requirements for connection of passenger boarding bridge or passenger transfer vehicle — Part 1: Main deck doors,Aéro
• ISO 7718-2:200944368,IS,,ISO 7718-2:2009,Aircraft — Passenger doors interface requirements for connection of passenger boarding bridge — Part 2: Upper deck doors,Aéronefs — Exigences d'interface
• ISO 7718-2:201671423,IS,,ISO 7718-2:2016,Aircraft — Passenger doors interface requirements for connection of passenger boarding bridge or passenger transfer vehicle — Part 2: Upper deck doors,Aér
• ISO 7718:198414547,IS,,ISO 7718:1984,Aircraft — Connection of passenger loading bridge or transfer vehicle — Interface requirements in the vicinity of main deck passenger doors,Aéronefs — Accou
• ISO 7718:200329863,IS,,ISO 7718:2003,Aircraft — Main-deck passenger doors — Interface requirements for connection with passenger-boarding bridge or transfer vehicle,Aéronefs — Portes passagers
• ISO 7719:198314548,IS,,ISO 7719:1983,"Prevailing torque type all-metal hexagon nuts, style 1 — Property classes 5, 8 and 10","Écrous hexagonaux à freinage interne, à couple préalable (tout méta
• ISO 7719:199714549,IS,,ISO 7719:1997,"Prevailing torque type all-metal hexagon nuts, style 1 — Property classes 5, 8 and 10","Écrous hexagonaux autofreinés tout métal, style 1 — Classes de qua
• ISO 7719:201261367,IS,,ISO 7719:2012,"Prevailing torque type all-metal hexagon regular nuts — Property classes 5, 8 and 10","Écrous hexagonaux normaux autofreinés tout métal — Classes de qualit
• ISO 7719:2012/Cor 1:201363633,IS,Cor,ISO 7719:2012/Cor 1:2013,"Prevailing torque type all-metal hexagon regular nuts — Property classes 5, 8 and 10 — Technical Corrigendum 1","Écrous hexagonaux normaux au
• ISO 7720:198314550,IS,,ISO 7720:1983,"Prevailing torque type all-metal hexagon nuts, style 2 — Property class 9","Écrous hexagonaux à freinage interne, à couple préalable (tout métal), style 2
• ISO 7720:199714551,IS,,ISO 7720:1997,"Prevailing torque type all-metal hexagon nuts, style 2 — Property class 9","Écrous hexagonaux autofreinés tout métal, style 2 — Classe de qualité 9",1997-1
• ISO 7720:201261368,IS,,ISO 7720:2012,"Prevailing torque type all-metal hexagon nuts, style 2 — Property class 9","Écrous hexagonaux autofreinés tout métal, style 2 — Classe de qualité 9",2012-0
• ISO 7724-1:198414557,IS,,ISO 7724-1:1984,Paints and varnishes — Colorimetry — Part 1: Principles,Peintures et vernis — Colorimétrie — Partie 1: Principes,1984-09-01,1,['87.040'],ISO/TC 35/SC 9,95
• ISO 7724-2:198414558,IS,,ISO 7724-2:1984,Paints and varnishes — Colorimetry — Part 2: Colour measurement,Peintures et vernis — Colorimétrie — Partie 2: Mesurage de la couleur,1984-09-01,1,['87.04
• ISO 7724-3:198414559,IS,,ISO 7724-3:1984,Paints and varnishes — Colorimetry — Part 3: Calculation of colour differences,Peintures et vernis — Colorimétrie — Partie 3: Calcul des différences de co
• ISO 7725:199114560,IS,,ISO 7725:1991,Rubber and rubber products — Determination of bromine and chlorine content — Oxygen flask combustion technique,Caoutchouc et produits à base de caoutchouc —
• ISO 7726:198514561,IS,,ISO 7726:1985,Thermal environments — Instruments and methods for measuring physical quantities,Ambiances thermiques — Appareils et méthodes de mesure des grandeurs physiq
• ISO 7726:199814562,IS,,ISO 7726:1998,Ergonomics of the thermal environment — Instruments for measuring physical quantities,Ergonomie des ambiances thermiques — Appareils de mesure des grandeurs
• ISO 7728:198514564,IS,,ISO 7728:1985,Typical horizontal joints between an external wall of prefabricated ordinary concrete components and a concrete floor — Properties. characteristics and clas
• ISO 7729:198514565,IS,,ISO 7729:1985,"Typical vertical joints between two prefabricated ordinary concrete external wall components — Properties, characteristics and classification criteria","As
• ISO 7730:198414566,IS,,ISO 7730:1984,Moderate thermal environments — Determination of the PMV and PPD indices and specification of the conditions for thermal comfort,Ambiances thermiques modéré
• ISO 7730:199414567,IS,,ISO 7730:1994,Moderate thermal environments — Determination of the PMV and PPD indices and specification of the conditions for thermal comfort,Ambiances thermiques modéré
• ISO 7730:200539155,IS,,ISO 7730:2005,Ergonomics of the thermal environment — Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and loca
• ISO 7731:198614568,IS,,ISO 7731:1986,Danger signals for work places — Auditory danger signals,Signaux de danger pour les lieux de travail — Signaux auditifs,1986-12-18,1,"['13.320','13.180']",I
• ISO 7738:198714576,IS,,ISO 7738:1987,Combination wrenches — Minimum length,Clés mixtes de serrage — Longueurs minimales,1987-09-24,1,['25.140.30'],ISO/TC 29/SC 10,9599,,[14577],"['en','fr']",
• ISO 7738:199014577,IS,,ISO 7738:1990,Spanners and wrenches — Combination wrenches — Minimum length and thickness of heads,Outils de manoeuvre pour vis et écrous — Clés mixtes de serrage — Longu
• ISO 7738:200126670,IS,,ISO 7738:2001,Assembly tools for screws and nuts — Combination wrenches — Lengths of wrenches and maximum thickness of heads,Outils de manoeuvre pour vis et écrous — Clés
• ISO 7739:198314578,IS,,ISO 7739:1983,Cinematography — Two-track photographic sound records on 16 mm motion-picture prints — Positions and width dimensions,Cinématographie — Enregistrement de de
• ISO 7743:198914583,IS,,ISO 7743:1989,"Rubber, vulcanized or thermoplastic — Determination of compression stress-strain properties",Caoutchouc vulcanisé ou thermoplastique — Détermination des pr
• ISO 7743:1989/Cor 1:199014584,IS,Cor,ISO 7743:1989/Cor 1:1990,"Rubber, vulcanized or thermoplastic — Determination of compression stress-strain properties — Technical Corrigendum 1",Caoutchouc vulcanisé o
• ISO 7743:200436956,IS,,ISO 7743:2004,"Rubber, vulcanized or thermoplastic — Determination of compression stress-strain properties",Caoutchouc vulcanisé ou thermoplastique — Détermination des pr
• ISO 7743:200844120,IS,,ISO 7743:2008,"Rubber, vulcanized or thermoplastic — Determination of compression stress-strain properties",Caoutchouc vulcanisé ou thermoplastique — Détermination des pr
• ISO 7743:201151795,IS,,ISO 7743:2011,"Rubber, vulcanized or thermoplastic — Determination of compression stress-strain properties",Caoutchouc vulcanisé ou thermoplastique — Détermination des pr
• ISO 7744:198614585,IS,,ISO 7744:1986,Hydraulic fluid power — Filters — Statement of requirements,Transmissions hydrauliques — Filtres — Spécification des conditions d'emploi,1986-07-10,1,['23.1
• ISO 7745:198914586,IS,,ISO 7745:1989,Hydraulic fluid power — Fire-resistant (FR) fluids — Guidelines for use,Transmissions hydrauliques — Fluides difficilement inflammables — Principes directeu
• ISO 7745:201050154,IS,,ISO 7745:2010,Hydraulic fluid power — Fire-resistant (FR) fluids — Requirements and guidelines for use,Transmissions hydrauliques — Fluides difficilement inflammables — E
• ISO 7746:198814587,IS,,ISO 7746:1988,Banking — Telex formats for inter-bank messages,Banque — Messages télex interbancaires,1988-04-28,1,['03.060'],ISO/TC 68,9599,,[25427],"['en','fr']",50
• ISO 7749-1:198614592,IS,,ISO 7749-1:1986,Irrigation equipment — Rotating sprinklers — Part 1: Design and operational requirements,Matériel d'irrigation — Asperseurs rotatifs — Partie 1: Exigences
• ISO 7749-1:199514593,IS,,ISO 7749-1:1995,Agricultural irrigation equipment — Rotating sprinklers — Part 1: Design and operational requirements,Matériel agricole d'irrigation — Asperseurs rotatifs
• ISO 7749-2:199014594,IS,,ISO 7749-2:1990,Irrigation equipment — Rotating sprinklers — Part 2: Uniformity of distribution and test methods,Matériel d'irrigation — Asperseurs rotatifs — Partie 2: U
• ISO 7750-1:198314595,IS,,ISO 7750-1:1983,Road vehicles — Air filter elements for commercial vehicles — Dimensions — Part 1: Types A and B,Véhicules routiers — Éléments de filtre à air pour véhicu
• ISO 7751:198314598,IS,,ISO 7751:1983,Rubber and plastics hoses and hose assemblies — Ratios of proof and burst pressure to design working pressure,Tuyaux et flexibles en caoutchoucs et plastiqu
• ISO 7751:199114599,IS,,ISO 7751:1991,Rubber and plastics hoses and hose assemblies — Ratios of proof and burst pressure to maximum working pressure,Tuyaux et flexibles en caoutchouc et en plast
• ISO 7751:1991/Amd 1:201157846,IS,Amd,ISO 7751:1991/Amd 1:2011,Rubber and plastics hoses and hose assemblies — Ratios of proof and burst pressure to maximum working pressure — Amendment 1: Replacement of '
• ISO 7752-1:198314600,IS,,ISO 7752-1:1983,Lifting appliances — Controls — Layout and characteristics — Part 1: General principles,Appareils de levage — Organes de service — Disposition et caractér
• ISO 7752-2:198514601,IS,,ISO 7752-2:1985,Lifting appliances — Controls — Layout and characteristics — Part 2: Basic arrangement and requirements for mobile cranes,Appareils de levage — Organes de
• ISO 7752-2:1985/Add 1:198614602,IS,Add,ISO 7752-2:1985/Add 1:1986,Lifting appliances — Controls — Layout and characteristics — Part 2: Basic arrangement and requirements for mobile cranes — Addendum 1,Appar
• ISO 7752-2:201154058,IS,,ISO 7752-2:2011,Cranes — Control layout and characteristics — Part 2: Basic arrangement and requirements for mobile cranes,Appareils de levage à charge suspendue — Dispos
• ISO 7752-3:199314603,IS,,ISO 7752-3:1993,Cranes — Controls — Layout and characteristics — Part 3: Tower cranes,Appareils de levage à charge suspendue — Organes de service — Disposition et caracté
• ISO 7752-3:201046494,IS,,ISO 7752-3:2010,Cranes — Control layout and characteristics — Part 3: Tower cranes,Appareils de levage à charge suspendue — Disposition et caractéristiques des commandes
• ISO 7752-5:198514605,IS,,ISO 7752-5:1985,Lifting appliances — Controls — Layout and characteristics — Part 5: Overhead travelling cranes and portal bridge cranes,Appareils de levage — Organes de
• ISO 7753:198714606,IS,,ISO 7753:1987,Nuclear energy — Performance and testing requirements for criticality detection and alarm systems,Énergie nucléaire — Prescriptions relatives aux caractéris
• ISO 7755-1:198414608,IS,,ISO 7755-1:1984,Hardmetal burrs — Part 1: General specifications,Fraises-limes en métaux-durs — Partie 1: Spécifications générales,1984-11-01,1,['25.100.20'],ISO/TC 29/SC
• ISO 7755-2:198414609,IS,,ISO 7755-2:1984,Hardmetal burrs — Part 2: Cylindrical burrs (style A),Fraises-limes en métaux-durs — Partie 2: Fraises-limes cylindriques (forme A),1984-11-01,1,['25.100.
• ISO 7755-3:198414610,IS,,ISO 7755-3:1984,Hardmetal burrs — Part 3: Cylindrical round- (ball-) nose burrs (style C),Fraises-limes en métaux-durs — Partie 3: Fraises-limes cylindriques à bout rond
• ISO 7755-4:198414611,IS,,ISO 7755-4:1984,Hardmetal burrs — Part 4: Spherical burrs (style D),Fraises-limes en métaux-durs — Partie 4: Fraises-limes sphériques (forme D),1984-11-01,1,['25.100.20']
• ISO 7755-5:198414612,IS,,ISO 7755-5:1984,Hardmetal burrs — Part 5: Oval burrs (style E),Fraises-limes en métaux-durs — Partie 5: Fraises-limes ovales (forme E),1984-11-01,1,['25.100.20'],ISO/TC 2
• ISO 7755-6:198414613,IS,,ISO 7755-6:1984,Hardmetal burrs — Part 6: Arch round- (ball-) nose burrs (style F),Fraises-limes en métaux-durs — Partie 6: Fraises-limes ogives à bout rond (forme F),198
• ISO 7755-7:198414614,IS,,ISO 7755-7:1984,Hardmetal burrs — Part 7: Arch pointed-nose burrs (style G),Fraises-limes en métaux-durs — Partie 7: Fraises-limes ogives à bout pointu (forme G),1984-11-
• ISO 7755-8:198414615,IS,,ISO 7755-8:1984,Hardmetal burrs — Part 8: Flame burrs (style H),Fraises-limes en métaux-durs — Partie 8: Fraises-limes flammes (forme H),1984-11-01,1,['25.100.20'],ISO/TC
• ISO 7755-9:198414616,IS,,ISO 7755-9:1984,Hardmetal burrs — Part 9: 60 degrees and 90 degrees cone burrs (styles J and K),Fraises-limes en métaux-durs — Partie 9: Fraises-limes coniques 60 degrés
• ISO 7755-10:198414617,IS,,ISO 7755-10:1984,Hardmetal burrs — Part 10: Conical round- (ball-) nose burrs (style L),Fraises-limes en métaux-durs — Partie 10: Fraises-limes coniques à bout rond (form
• ISO 7755-11:198414618,IS,,ISO 7755-11:1984,Hardmetal burrs — Part 11: Conical pointed-nose burrs (style M),Fraises-limes en métaux-durs — Partie 11: Fraises-limes coniques à bout pointu (forme M),
• ISO 7755-12:198414619,IS,,ISO 7755-12:1984,Hardmetal burrs — Part 12: Inverted cone burrs (style N),Fraises-limes en métaux-durs — Partie 12: Fraises-limes à cône inverse (forme N),1984-11-01,1,['
• ISO 7759:198314623,IS,,ISO 7759:1983,Anodizing of aluminium and its alloys — Measurement of reflectivity characteristics of aluminium surfaces using abridged goniophotometer or goniophotometer,
• ISO 7760:198614624,IS,,ISO 7760:1986,Photographic processing waste — Determination of hydroquinone content — Spectrophotometric method,Déchets des traitements photographiques — Dosage de l'hydr
• ISO 7764:198514628,IS,,ISO 7764:1985,Iron ores — Preparation of predried test samples for chemical analysis,Minerais de fer — Préparation des échantillons préséchés pour analyse chimique,1985-0
• ISO 7765-2:199414630,IS,,ISO 7765-2:1994,Plastics film and sheeting — Determination of impact resistance by the free-falling dart method — Part 2: Instrumented puncture test,Film et feuille de pl
• ISO 7765-2:202281986,IS,,ISO 7765-2:2022,Plastics film and sheeting — Determination of impact resistance by the free-falling dart method — Part 2: Instrumented puncture test,Film et feuille de pl
• ISO 7766-1:199314631,IS,,ISO 7766-1:1993,Photography — Processing wastes — Analysis of cyanides — Part 1: Determination of hexacyanoferrate(II) and hexacyanoferrate(III) by spectrometry,Photograp
• ISO 7767:199722622,IS,,ISO 7767:1997,Oxygen monitors for monitoring patient breathing mixtures — Safety requirements,Analyseurs d'oxygène pour le contrôle des mélanges gazeux respirés par le pa
• ISO 7768:198514635,IS,,ISO 7768:1985,Textiles — Method for assessing the appearance of durable press fabrics after domestic washing and drying,Textiles — Méthode d'essai pour l'évaluation de l'
• ISO 7768:200638657,IS,,ISO 7768:2006,Textiles — Test method for assessing the smoothness appearance of fabrics after cleansing,Textiles — Méthode d'essai pour l'évaluation de la régularité d'a
• ISO 7769:198514636,IS,,ISO 7769:1985,Textiles — Method for assessing the appearance of creases in durable press products after domestic washing and drying,Textiles — Méthode d'essai pour l'éval
• ISO 7769:199214637,IS,,ISO 7769:1992,Textiles — Method for assessing the appearance of creases in durable-press products after domestic washing and drying,Textiles — Méthode d'essai pour l'éval
• ISO 7769:200638681,IS,,ISO 7769:2006,Textiles — Test method for assessing the appearance of creases in fabrics after cleansing,Textiles — Méthode d'essai pour l'évaluation de l'aspect des plis
• ISO 7770:198514638,IS,,ISO 7770:1985,Textiles — Method for assessing the appearance of seams in durable press products after domestic washing and drying,Textiles — Méthodes d'essai pour l'évalu
• ISO 7770:200638682,IS,,ISO 7770:2006,Textiles — Test method for assessing the smoothness appearance of seams in fabrics after cleansing,Textiles — Méthode d'essai pour l'évaluation de la régula
• ISO 7775-1:198414648,IS,,ISO 7775-1:1984,Securities — Standard scheme for message types — Part 1: Receipt/delivery,Valeurs mobilières — Plan de norme pour les types de messages — Partie 1: Récept
• ISO 7775-2:198614649,IS,,ISO 7775-2:1986,Securities — Scheme for message types — Part 2: Order to buy/sell,Valeurs mobilières — Structure des types de messages — Partie 2: Ordre d'achat/de vente,
• ISO 7775:199114646,IS,,ISO 7775:1991,Securities — Scheme for message types,Valeurs mobilières — Types de messages,1991-11-14,1,['03.060'],ISO/TC 68,9599,"[14648,14649]","[26156,27999]","['en','
• ISO 7776:198614652,IS,,ISO 7776:1986,Information processing systems — Data communications — High-level data link control procedures — Description of the X.25 LAPB-compatible DTE data link proce
• ISO 7776:1986/Amd 1:199214653,IS,Amd,ISO 7776:1986/Amd 1:1992,Information processing systems — Data communications — High-level data link control procedures — Description of the X.25 LAPB-compatible DTE d
• ISO 7776:1986/Cor 1:198914654,IS,Cor,ISO 7776:1986/Cor 1:1989,Information processing systems — Data communications — High-level data link control procedures — Description of the X.25 LAPB-compatible DTE d
• ISO 7776:1986/Cor 2:198914655,IS,Cor,ISO 7776:1986/Cor 2:1989,Information processing systems — Data communications — High-level data link control procedures — Description of the X.25 LAPB-compatible DTE d
• ISO 7776:1986/Cor 3:199114656,IS,Cor,ISO 7776:1986/Cor 3:1991,Information processing systems — Data communications — High-level data link control procedures — Description of the X.25 LAPB-compatible DTE d
• ISO 7778:198314658,IS,,ISO 7778:1983,Steel plate with specified through-thickness characteristics,Tôles en acier avec caractéristiques garanties dans le sens de l'épaisseur,1983-09-01,1,['77.14
• ISO 7779:198814659,IS,,ISO 7779:1988,Acoustics — Measurement of airborne noise emitted by computer and business equipment,Acoustique — Mesurage du bruit aérien émis par les équipements informat
• ISO 7779:199924919,IS,,ISO 7779:1999,Acoustics — Measurement of airborne noise emitted by information technology and telecommunications equipment,Acoustique — Mesurage du bruit aérien émis par
• ISO 7779:1999/Amd 1:200334559,IS,Amd,ISO 7779:1999/Amd 1:2003,Acoustics — Measurement of airborne noise emitted by information technology and telecommunications equipment — Amendment 1: Noise measurement
• ISO 7779:201054363,IS,,ISO 7779:2010,Acoustics — Measurement of airborne noise emitted by information technology and telecommunications equipment,Acoustique — Mesurage du bruit aérien émis par
• ISO 7780:198714660,IS,,ISO 7780:1987,Rubbers and rubber latices — Determination of manganese content — Sodium periodate photometric methods,Caoutchoucs et latex de caoutchoucs — Dosage du manga
• ISO 7781:198614662,IS,,ISO 7781:1986,"Rubber, raw styrene-butadiene — Soap and organic acid content — Determination",Caoutchouc butadiène-styrène brut — Détermination de la teneur en savons et
• ISO 7781:199620153,IS,,ISO 7781:1996,"Rubber, raw styrene-butadiene — Determination of soap and organic-acid content",Caoutchouc butadiène-styrène brut — Détermination de la teneur en savons et
• ISO 7781:200133841,IS,,ISO 7781:2001,"Styrene-butadiene rubber, raw — Determination of soap and organic-acid content",Caoutchouc butadiène-styrène brut — Détermination de la teneur en savons e
• ISO 7781:200845393,IS,,ISO 7781:2008,"Styrene-butadiene rubber, raw — Determination of soap and organic-acid content",Caoutchouc butadiène-styrène brut — Détermination de la teneur en savons e
• ISO 7783-1:199614664,IS,,ISO 7783-1:1996,Paints and varnishes — Determination of water-vapour transmission rate — Part 1: Dish method for free films,Peintures et vernis — Détermination du coeffic
• ISO 7783-1:1996/Cor 1:199830958,IS,Cor,ISO 7783-1:1996/Cor 1:1998,Paints and varnishes — Determination of water-vapour transmission rate — Part 1: Dish method for free films — Technical Corrigendum 1,Peintu
• ISO 7783-2:199919456,IS,,ISO 7783-2:1999,Paints and varnishes — Coating materials and coating systems for exterior masonry and concrete — Part 2: Determination and classification of water-vapour
• ISO 7783:201146283,IS,,ISO 7783:2011,Paints and varnishes — Determination of water-vapour transmission properties — Cup method,Peintures et vernis — Détermination des propriétés de transmission
• ISO 7784-1:199714665,IS,,ISO 7784-1:1997,Paints and varnishes — Determination of resistance to abrasion — Part 1: Rotating abrasive-paper-covered wheel method,Peintures et vernis — Détermination
• ISO 7784-1:201662344,IS,,ISO 7784-1:2016,Paints and varnishes — Determination of resistance to abrasion — Part 1: Method with abrasive-paper covered wheels and rotating test specimen,Peintures et
• ISO 7784-2:199723237,IS,,ISO 7784-2:1997,Paints and varnishes — Determination of resistance to abrasion — Part 2: Rotating abrasive rubber wheel method,Peintures et vernis — Détermination de la r
• ISO 7784-2:201662345,IS,,ISO 7784-2:2016,Paints and varnishes — Determination of resistance to abrasion — Part 2: Method with abrasive rubber wheels and rotating test specimen,Peintures et vernis
• ISO 7784-3:200022383,IS,,ISO 7784-3:2000,Paints and varnishes — Determination of resistance to abrasion — Part 3: Reciprocating test panel method,Peintures et vernis — Détermination de la résista
• ISO 7784-3:201664796,IS,,ISO 7784-3:2016,Paints and varnishes — Determination of resistance to abrasion — Part 3: Method with abrasive-paper covered wheel and linearly reciprocating test specimen
• ISO 7785-1:199214666,IS,,ISO 7785-1:1992,Dental handpieces — Part 1: High-speed air-turbine handpieces,Pièces à main dentaires — Partie 1: Pièces à main à turbines à air comprimé pour grandes vit
• ISO 7785-1:199722723,IS,,ISO 7785-1:1997,Dental handpieces — Part 1: High-speed air turbine handpieces,Pièces à main dentaires — Partie 1: Pièces à main à turbines à air comprimé pour grandes vit
• ISO 7785-2:199114667,IS,,ISO 7785-2:1991,Dental handpieces — Part 2: Straight and geared angle handpieces,Pièces à main dentaires — Partie 2: Pièces à main rectilignes et à contre-angles,1991-10-
• ISO 7785-2:199520415,IS,,ISO 7785-2:1995,Dental handpieces — Part 2: Straight and geared angle handpieces,Pièces à main dentaires — Partie 2: Pièces à main rectilignes et à contre-angles,1995-07-
• ISO 7786:198414670,IS,,ISO 7786:1984,Dental rotary instruments — Laboratory abrasive instruments,Instruments rotatifs dentaires — Instruments abrasifs de laboratoire,1984-08-01,1,['11.060.20'],
• ISO 7786:199014671,IS,,ISO 7786:1990,Dental rotary instruments — Laboratory abrasive instruments,Instruments rotatifs dentaires — Instruments abrasifs de laboratoire,1990-08-23,2,['11.060.20'],
• ISO 7787-1:198414672,IS,,ISO 7787-1:1984,Dental rotary instruments — Cutters — Part 1: Steel laboratory cutters,Instruments rotatifs dentaires — Fraises techniques — Partie 1: Fraises techniques
• ISO 7787-2:198414673,IS,,ISO 7787-2:1984,Dental rotary instruments — Cutters — Part 2: Carbide laboratory cutters,Instruments rotatifs dentaires — Fraises techniques — Partie 2: Fraises technique
• ISO 7787-2:199214674,IS,,ISO 7787-2:1992,Dental rotary instruments — Cutters — Part 2: Carbide laboratory cutters,Instruments rotatifs dentaires — Fraises techniques — Partie 2: Fraises technique
• ISO 7787-2:199827139,IS,,ISO 7787-2:1998,Dental rotary instruments — Cutters — Part 2: Carbide laboratory cutters,Instruments rotatifs dentaires — Fraises techniques — Partie 2: Fraises technique
• ISO 7787-2:200031247,IS,,ISO 7787-2:2000,Dental rotary instruments — Cutters — Part 2: Carbide laboratory cutters,Instruments rotatifs dentaires — Fraises techniques — Partie 2: Fraises technique
• ISO 7787-3:199114675,IS,,ISO 7787-3:1991,Dental rotary instruments — Cutters — Part 3: Carbide laboratory cutters for milling machines,Instruments rotatifs dentaires — Fraises techniques — Partie
• ISO 7788:198514676,IS,,ISO 7788:1985,Steel — Surface finish of hot-rolled plates and wide flats — Delivery requirements,Acier — État de surface des tôles et larges-plats laminés à chaud — Condi
• ISO 7789:199814677,IS,,ISO 7789:1998,"Hydraulic fluid power — Two-, three- and four-port screw-in cartridge valves — Cavities","Transmissions hydrauliques — Distributeurs à cartouche à visser à
• ISO 7789:1998/Cor 1:199931109,IS,Cor,ISO 7789:1998/Cor 1:1999,"Hydraulic fluid power — Two-, three- and four-port screw-in cartridge valves — Cavities — Technical Corrigendum 1","Transmissions hydraulique
• ISO 7790:198614678,IS,,ISO 7790:1986,"Hydraulic fluid power — Four-port modular stack valves and four-port directional control valves, sizes 03 and 05 — Clamping dimensions","Transmissions hydr
• ISO 7790:199714679,IS,,ISO 7790:1997,"Hydraulic fluid power — Four-port modular stack valves and four-port directional control valves, sizes 02, 03 and 05 — Clamping dimensions","Transmissions
• ISO 7792-1:198514683,IS,,ISO 7792-1:1985,Plastics — Polyalkylene terephthalates — Part 1: Designation,Plastiques — Polyalkylène téréphtalates — Partie 1: Désignation,1985-12-19,1,['83.080.20'],IS
• ISO 7792-1:199523948,IS,,ISO 7792-1:1995,Plastics — Poly(alkylene terephthalate) moulding and extrusion materials — Part 1: Designation system and basis for specifications,Plastiques — Poly(alkyl
• ISO 7792-1:199725654,IS,,ISO 7792-1:1997,Plastics — Thermoplastic polyester (TP) moulding and extrusion materials — Part 1: Designation system and basis for specifications,Plastiques — Polyesters
• ISO 7792-1:201255479,IS,,ISO 7792-1:2012,Plastics — Thermoplastic polyester (TP) moulding and extrusion materials — Part 1: Designation system and basis for specifications,Plastiques — Polyesters
• ISO 7792-2:198814684,IS,,ISO 7792-2:1988,Plastics — Polyalkylene terephthalates — Part 2: Preparation of test specimens and determination of properties,Plastiques — Polyalkylène téréphtalates — P
• ISO 7792-2:199725184,IS,,ISO 7792-2:1997,Plastics — Thermoplastic polyester (TP) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties,Plastique
• ISO 7792-2:201255480,IS,,ISO 7792-2:2012,Plastics — Thermoplastic polyester (TP) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties,Plastique
• ISO 7793:198414685,IS,,ISO 7793:1984,Cross-country skis — Binding mounting area — Stripping torque — Requirements and test method,Skis de fond — Zone de montage de la fixation — Résistance au f
• ISO 7794:198414686,IS,,ISO 7794:1984,Cross-country skis — Ski binding screws — Requirements,Skis de fond — Vis de fixation — Spécifications,1984-05-01,1,['97.220.20'],ISO/TC 83/SC 4,9599,,[1468
• ISO 7794:199114687,IS,,ISO 7794:1991,Cross-country skis — Ski binding screws — Requirements,Skis de fond — Vis de fixation — Spécifications,1991-07-18,2,['97.220.20'],ISO/TC 83/SC 4,9599,[14686
• ISO 7795:198414688,IS,,ISO 7795:1984,Cross-country skis — Ski binding screws — Test methods,Skis de fond — Vis de fixation — Méthodes d'essai,1984-05-01,1,['97.220.20'],ISO/TC 83/SC 4,9599,,[14
• ISO 7795:199414689,IS,,ISO 7795:1994,Cross-country skis — Ski-binding screws — Test methods,Skis de fond — Vis de fixation — Méthodes d'essai,1994-07-21,2,['97.220.20'],ISO/TC 83/SC 4,9599,[146
• ISO 7798:198414692,IS,,ISO 7798:1984,Cross-country skis — Determination of fatigue indexes — Cyclic loading test,Skis de fond — Détermination des indices de fatigue — Essai en flexion alternée,
• ISO 7800:198414694,IS,,ISO 7800:1984,Metallic materials — Wire — Simple torsion test,Matériaux métalliques — Fils — Essai de torsion simple,1984-03-01,1,['77.040.10'],ISO/TC 164/SC 2,9599,"[538
• ISO 7800:200334653,IS,,ISO 7800:2003,Metallic materials — Wire — Simple torsion test,Matériaux métalliques — Fils — Essai de torsion simple,2003-08-25,2,['77.040.10'],ISO/TC 164/SC 2,9599,[1469
• ISO 7801:198414695,IS,,ISO 7801:1984,Metallic materials — Wire — Reverse bend test,Matériaux métalliques — Fils — Essai de pliage alterné,1984-05-01,1,['77.040.10'],ISO/TC 164/SC 2,9599,"[7602,
• ISO 7802:198314696,IS,,ISO 7802:1983,Metallic materials — Wire — Wrapping test,Matériaux métalliques — Fils — Essai d'enroulement,1983-10-01,1,['77.040.10'],ISO/TC 164/SC 2,9599,"[3972,4397,538
• ISO 7809:198414706,IS,,ISO 7809:1984,Information processing systems — Data communication — High-level data link control procedures — Consolidation of classes of procedures,Systèmes de traitemen
• ISO 7809:1984/Amd 5:199214710,IS,Amd,ISO 7809:1984/Amd 5:1992,Information processing systems — Data communication — High-level data link control procedures — Consolidation of classes of procedures — Amend
• ISO 7809:1984/Amd 6:199214711,IS,Amd,ISO 7809:1984/Amd 6:1992,Information processing systems — Data communication — High-level data link control procedures — Consolidation of classes of procedures — Amend
• ISO 7809:1984/Amd 7:199114712,IS,Amd,ISO 7809:1984/Amd 7:1991,Information processing systems — Data communication — High-level data link control procedures — Consolidation of classes of procedures — Amend
• ISO 7810:198514714,IS,,ISO 7810:1985,Identification cards — Physical characteristics,Cartes d'identification — Caractéristiques physiques,1985-12-19,1,['35.240.40'],ISO/IEC JTC 1/SC 17,9599,"[7
• ISO 7811-1:198514716,IS,,ISO 7811-1:1985,Identification cards — Recording technique — Part 1: Embossing,Cartes d'identification — Technique d'enregistrement — Partie 1: Estampage,1985-12-19,1,['3
• ISO 7811-2:198514718,IS,,ISO 7811-2:1985,Identification cards — Recording technique — Part 2: Magnetic stripe,Cartes d'identification — Technique d'enregistrement — Partie 2: Magnétique,1985-12-1
• ISO 7811-3:198514720,IS,,ISO 7811-3:1985,Identification cards — Recording technique — Part 3: Location of embossed characters on ID-1 cards,Cartes d'identification — Technique d'enregistrement —
• ISO 7811-4:198514722,IS,,ISO 7811-4:1985,Identification cards — Recording technique — Part 4: Location of read-only magnetic tracks — Tracks 1 and 2,"Cartes d'identification — Technique d'enregis
• ISO 7811-5:198514724,IS,,ISO 7811-5:1985,Identification cards — Recording technique — Part 5: Location of read-write magnetic track — Track 3,"Cartes d'identification — Technique d'enregistrement
• ISO 7812:198514726,IS,,ISO 7812:1985,Identification cards — Numbering system and registration procedure for issuer identifiers,Cartes d'identification — Système de numérotation et procédure d'e
• ISO 7812:198714727,IS,,ISO 7812:1987,Identification cards — Numbering system and registration procedure for issuer identifiers,Cartes d'identification — Système de numérotation et procédure d'e
• ISO 7812:1987/Cor 1:198814728,IS,Cor,ISO 7812:1987/Cor 1:1988,Identification cards — Numbering system and registration procedure for issuer identifiers — Technical Corrigendum 1,Cartes d'identification —
• ISO 7813:198714729,IS,,ISO 7813:1987,Identification cards — Financial transaction cards,Cartes d'identification — Cartes de transactions financières,1987-05-21,2,['35.240.15'],ISO/IEC JTC 1/SC
• ISO 7816-1:198714732,IS,,ISO 7816-1:1987,Identification cards — Integrated circuit(s) cards with contacts — Part 1: Physical characteristics,Cartes d'identification — Cartes à circuit(s) intégré(
• ISO 7816-2:198814733,IS,,ISO 7816-2:1988,Identification cards — Integrated circuit(s) cards with contacts — Part 2: Dimensions and location of the contacts,Cartes d'identification — Carte à circu
• ISO 7823-1:198714742,IS,,ISO 7823-1:1987,"Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 1: Cast sheets","Plastiques — Plaques en poly(méthacrylate de
• ISO 7823-1:199114743,IS,,ISO 7823-1:1991,"Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 1: Cast sheets","Plaques en poly(méthacrylate de méthyle) — Types, dimens
• ISO 7823-1:199828184,IS,,ISO 7823-1:1998,"Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 1: Cast sheets","Plastiques — Plaques en poly(méthacrylate de
• ISO 7823-2:198914744,IS,,ISO 7823-2:1989,"Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 2: Melt-calendered extruded sheets","Plastiques — Plaques en p
• ISO 7823-2:1989/Cor 1:199114745,IS,Cor,ISO 7823-2:1989/Cor 1:1991,"Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 2: Melt-calendered extruded sheets — Technical C
• ISO 7823-2:199625205,IS,,ISO 7823-2:1996,"Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 2: Melt-calendered extruded sheets","Plastiques — Plaques en p
• ISO 7823-3:200333449,IS,,ISO 7823-3:2003,"Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 3: Continuous cast sheets","Plastiques — Plaques en poly(métha
• ISO 7823-3:200738964,IS,,ISO 7823-3:2007,"Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 3: Continuous cast sheets","Plastiques — Plaques en poly(métha
• ISO 7825:198514747,IS,,ISO 7825:1985,Shipbuilding — Deck machinery — General requirements,Construction navale — Auxiliaires de pont — Prescriptions générales,1985-04-18,1,['47.020.50'],ISO/TC 8
• ISO 7827:198414749,IS,,ISO 7827:1984,Water quality — Evaluation in an aqueous medium of the 'ultimate' aerobic biodegradability of organic compounds — Method by analysis of dissolved organic ca
• ISO 7827:19942219,IS,,ISO 7827:1994,Water quality — Evaluation in an aqueous medium of the 'ultimate' aerobic biodegradability of organic compounds — Method by analysis of dissolved organic car
• ISO 7828:198514750,IS,,ISO 7828:1985,Water quality — Methods of biological sampling — Guidance on handnet sampling of aquatic benthic macro-invertebrates,Qualité de l'eau — Méthodes d'échantill
• ISO 7830:198314752,IS,,ISO 7830:1983,Photography — Safety photographic films other than motion picture films — Material specifications,Photographie — Films photographiques de sécurité autres qu
• ISO 7832:198714754,IS,,ISO 7832:1987,Cinematography — Photoelectric output factor of photographic-type audio-level test films — Measurement and calibration,Cinématographie — Facteur de sortie p
• ISO 7837:198314756,IS,,ISO 7837:1983,Fertilizers — Determination of bulk density (loose) of fine-grained fertilizers,Engrais — Détermination de la masse volumique sans tassement des engrais fin
• ISO 7839:198414759,IS,,ISO 7839:1984,Textile machinery and accessories — Knitting machines — Classification and vocabulary,Matériel pour l'industrie textile — Machines à tricoter — Classificati
• ISO 7840:198514760,IS,,ISO 7840:1985,Small craft — Fire resistant fuel hoses,"Navires de plaisance — Tuyaux souples résistant au feu, pour carburant",1985-10-17,1,['47.080'],ISO/TC 188,9599,,[1
• ISO 7840:199414761,IS,,ISO 7840:1994,Small craft — Fire-resistant fuel hoses,"Navires de plaisance — Tuyaux souples résistants au feu, pour carburant",1994-12-22,2,['47.080'],ISO/TC 188,9599,[1
• ISO 7840:200435180,IS,,ISO 7840:2004,Small craft — Fire-resistant fuel hoses,Petits navires — Tuyaux à carburant souples résistants au feu,2004-02-12,3,['47.080'],ISO/TC 188,9599,[14761],[59437
• ISO 7840:201359437,IS,,ISO 7840:2013,Small craft — Fire-resistant fuel hoses,Petits navires — Tuyaux souples pour carburant résistants au feu,2013-07-17,4,['47.080'],ISO/TC 188,9599,[35180],[79
• ISO 7841:198814762,IS,,ISO 7841:1988,Automatic steam traps — Determination of steam loss — Test methods,Purgeurs automatiques de vapeur d'eau — Détermination de la perte de vapeur — Méthodes d'
• ISO 7842:198814763,IS,,ISO 7842:1988,Automatic steam traps — Determination of discharge capacity — Test methods,Purgeurs automatiques de vapeur d'eau — Détermination du débit — Méthodes d'essai
• ISO 7848:198614769,IS,,ISO 7848:1986,Shank type milling cutters for indexable inserts — Designation,Fraises à queue à plaquettes amovibles — Désignation,1986-06-12,1,['25.100.20'],ISO/TC 29/SC
• ISO 7851:198314773,IS,,ISO 7851:1983,Fertilizers and soil conditioners — Classification,Matières fertilisantes — Classification,1983-10-01,1,['65.080'],ISO/TC 134,9599,,[77570],"['en','fr','ru'
• ISO 7854:198414776,IS,,ISO 7854:1984,Rubber- or plastics-coated fabrics — Determination of resistance to damage by flexing (dynamic method),Supports textiles revêtus de caoutchouc ou de plastiq
• ISO 7855:198514778,IS,,ISO 7855:1985,Torque wrenches — Test method,Clés dynamométriques — Méthode d'essai,1985-10-17,1,['25.140.30'],ISO/TC 29/SC 10,9599,,[13287],"['en','fr']",2
• ISO 7857-1:198314780,IS,,ISO 7857-1:1983,Intra-uterine devices — Part 1: Determination of breaking force,Dispositifs intra-utérins — Partie 1: Détermination de la force à la rupture,1983-12-01,1,
• ISO 7857-3:198314782,IS,,ISO 7857-3:1983,Intra-uterine devices — Part 3: Packaging and labelling,Dispositifs intra-utérins — Partie 3: Emballage et étiquetage,1983-11-01,1,['11.200'],ISO/TC 157,9
• ISO 7858-1:198514783,IS,,ISO 7858-1:1985,Measurement of water flow in closed conduits — Meters for cold potable water — Combination meters — Part 1: Specifications,Mesurage de débit d'eau dans le
• ISO 7858-1:199820465,IS,,ISO 7858-1:1998,Measurement of water flow in closed conduits — Combination meters for cold potable water — Part 1: Specifications,Mesurage de débit d'eau dans les conduit
• ISO 7858-2:198714784,IS,,ISO 7858-2:1987,Measurement of water flow in closed conduits — Meters for cold potable water — Combination meters — Part 2: Installation requirements,Mesurage de débit d'
• ISO 7858-2:200031133,IS,,ISO 7858-2:2000,Measurement of water flow in closed conduits — Combination meters for cold potable water — Part 2: Installation requirements,Mesurage de débit d'eau dans
• ISO 7858-3:199214785,IS,,ISO 7858-3:1992,Measurement of water flow in closed conduits — Meters for cold potable water — Combination meters — Part 3: Test methods,Mesurage du débit d'eau dans les
• ISO 7860:198314787,IS,,ISO 7860:1983,Road vehicles — Motorcycles — Method of measuring fuel consumption,Véhicules routiers — Motocycles — Méthode de mesurage de la consommation de carburant,198
• ISO 7860:199520174,IS,,ISO 7860:1995,Motorcycles — Methods of measuring fuel consumption,Motocycles — Méthodes de mesure de la consommation de carburant,1995-09-21,2,['43.140'],ISO/TC 22,9599,[
• ISO 7862:199214789,IS,,ISO 7862:1992,Passenger cars — Sled test procedure for evaluating adult restraint systems in simulated frontal collisions,Voitures particulières — Procédure d'essai sur c
• ISO 7864:198414791,IS,,ISO 7864:1984,Sterile hypodermic needles for single use,"Aiguilles hypodermiques stériles, non réutilisables",1984-08-01,1,['11.040.20'],ISO/TC 84,9599,,"[14792,14793]","
• ISO 7864:198814792,IS,,ISO 7864:1988,Sterile hypodermic needles for single use,"Aiguilles hypodermiques stériles, non réutilisables",1988-08-18,2,['11.040.20'],ISO/TC 84,9599,[14791],[14793],"[
• ISO 7864:199314793,IS,,ISO 7864:1993,Sterile hypodermic needles for single use,"Aiguilles hypodermiques stériles, non réutilisables",1993-05-06,3,['11.040.25'],ISO/TC 84,9599,"[14792,14791]",[6
• ISO 7866:199914795,IS,,ISO 7866:1999,"Gas cylinders — Refillable seamless aluminium alloy gas cylinders — Design, construction and testing","Bouteilles à gaz — Bouteilles sans soudure en alliag
• ISO 7867-1:198814796,IS,,ISO 7867-1:1988,Tyres and rims (metric series) for agricultural tractors and machines — Part 1: Tyre designation and dimensions,Pneumatiques et jantes (séries millimétriq
• ISO 7867-1:199214797,IS,,ISO 7867-1:1992,"Tyres and rims (metric series) for agricultural tractors and machines — Part 1: Tyre designation, dimensions and marking","Pneumatiques et jantes (série
• ISO 7867-1:19962729,IS,,ISO 7867-1:1996,"Tyres and rims (metric series) for agricultural tractors and machines — Part 1: Tyre designation, dimensions, marking and tyre/rim coordination","Pneumati
• ISO 7867-1:200539039,IS,,ISO 7867-1:2005,"Tyres and rims (metric series) for agricultural tractors and machines — Part 1: Tyre designation, dimensions and marking, and tyre/rim coordination","Pne
• ISO 7867-2:199614798,IS,,ISO 7867-2:1996,Tyres and rims (metric series) for agricultural tractors and machines — Part 2: Service description and load ratings,Pneumatiques et jantes (séries millim
• ISO 7867-2:1996/Cor 1:199627766,IS,Cor,ISO 7867-2:1996/Cor 1:1996,Tyres and rims (metric series) for agricultural tractors and machines — Part 2: Service description and load ratings — Technical Corrigendum
• ISO 7867-2:200539040,IS,,ISO 7867-2:2005,Tyres and rims (metric series) for agricultural tractors and machines — Part 2: Service description and load ratings,Pneumatiques et jantes (série millimé
• ISO 7867-2:2005/Amd 1:201046505,IS,Amd,ISO 7867-2:2005/Amd 1:2010,Tyres and rims (metric series) for agricultural tractors and machines — Part 2: Service description and load ratings — Amendment 1: .,Pneuma
• ISO 7870-1:200740146,IS,,ISO 7870-1:2007,Control charts — Part 1: General guidelines,Cartes de contrôle — Partie 1: Lignes directrices générales,2007-09-19,1,['03.120.30'],ISO/TC 69/SC 4,9599,[14
• ISO 7870-1:201462649,IS,,ISO 7870-1:2014,Control charts — Part 1: General guidelines,Cartes de contrôle — Partie 1: Lignes directrices générales,2014-01-22,2,['03.120.30'],ISO/TC 69/SC 4,9599,[40
• ISO 7870-2:201340174,IS,,ISO 7870-2:2013,Control charts — Part 2: Shewhart control charts,Cartes de contrôle — Partie 2: Cartes de contrôle de Shewhart,2013-03-25,1,['03.120.30'],ISO/TC 69/SC 4,9
• ISO 7870-3:201240175,IS,,ISO 7870-3:2012,Control charts — Part 3: Acceptance control charts,Cartes de contrôle — Partie 3: Cartes de contrôle pour acceptation,2012-02-22,1,['03.120.30'],ISO/TC 69
• ISO 7870-4:201140176,IS,,ISO 7870-4:2011,Control charts — Part 4: Cumulative sum charts,Cartes de contrôle — Partie 4: Cartes de contrôle de l'ajustement de processus,2011-06-29,1,['03.120.30'],I
• ISO 7870-6:201640173,IS,,ISO 7870-6:2016,Control charts — Part 6: EWMA control charts,Cartes de contrôle — Partie 6: Cartes de contrôle de EWMA,2016-02-15,1,['03.120.30'],ISO/TC 69/SC 4,9599,,[83
• ISO 7870:199314803,IS,,ISO 7870:1993,Control charts — General guide and introduction,Cartes de contrôle — Principes généraux et introduction à l'emploi,1993-12-23,1,['03.120.30'],ISO/TC 69/SC 4
• ISO 7875-1:198414808,IS,,ISO 7875-1:1984,Water quality — Determination of surfactants — Part 1: Determination of anionic surfactants by the methylene blue spectrometric method,Qualité de l'eau —
• ISO 7876-1:198414810,IS,,ISO 7876-1:1984,Fuel injection equipment — Vocabulary — Part 1: Fuel injection pumps,Équipement d'injection de combustible — Vocabulaire — Partie 1: Pompes d'injection de
• ISO 7876-4:199420838,IS,,ISO 7876-4:1994,Fuel injection equipment — Vocabulary — Part 4: High-pressure pipes and end-connections,Équipement d'injection de combustible — Vocabulaire — Partie 4: Tu
• ISO 7876-5:200434828,IS,,ISO 7876-5:2004,Fuel injection equipment — Vocabulary — Part 5: Common rail fuel injection system,Équipement d'injection de combustible — Vocabulaire — Partie 5: Système
• ISO 7879:198314819,IS,,ISO 7879:1983,Road vehicles — Cradle-mounted in-line fuel injection pumps — Mounting dimensions,Véhicules routiers — Pompes d'injection en ligne avec fixation par berceau
• ISO 7879:199014820,IS,,ISO 7879:1990,Road vehicles — Cradle-mounted in-line fuel injection pumps — Mounting dimensions,Véhicules routiers — Pompes d'injection en ligne avec fixation par berceau
• ISO 7885:199614833,IS,,ISO 7885:1996,"Sterile, single-use dental injection needles","Aiguilles dentaires stériles pour injection, non réutilisables",1996-08-22,1,"['11.040.20','11.060.20']",ISO
• ISO 7885:200030575,IS,,ISO 7885:2000,Sterile dental injection needles for single use,"Aiguilles dentaires stériles pour injection, non réutilisables",2000-12-21,2,"['11.040.25','11.060.20']",IS
• ISO 7886-1:199314835,IS,,ISO 7886-1:1993,Sterile hypodermic syringes for single use — Part 1: Syringes for manual use,"Seringues hypodermiques stériles, non réutilisables — Partie 1: Seringues po
• ISO 7886-1:1993/Cor 1:199526290,IS,Cor,ISO 7886-1:1993/Cor 1:1995,Sterile hypodermic syringes for single use — Part 1: Syringes for manual use — Technical Corrigendum 1,"Seringues hypodermiques stériles, no
• ISO 7886-2:199621017,IS,,ISO 7886-2:1996,Sterile hypodermic syringes for single use — Part 2: Syringes for use with power-driven syringe pumps,"Seringues hypodermiques stériles, non réutilisables
• ISO 7886-3:200536742,IS,,ISO 7886-3:2005,Sterile hypodermic syringes for single use — Part 3: Auto-disable syringes for fixed-dose immunization,"Seringues hypodermiques stériles, non réutilisable
• ISO 7886-4:200638024,IS,,ISO 7886-4:2006,Sterile hypodermic syringes for single use — Part 4: Syringes with re-use prevention feature,"Seringues hypodermiques stériles, non réutilisables — Partie
• ISO 7886:198414834,IS,,ISO 7886:1984,Sterile hypodermic syringes for single use,"Seringues hypodermiques stériles, non réutilisables",1984-09-01,1,['11.040.20'],ISO/TC 84,9599,,"[21017,14835]",
• ISO 7887:198514836,IS,,ISO 7887:1985,Water quality — Examination and determination of colour,Qualité de l'eau — Examen et détermination de la couleur,1985-02-14,1,['13.060.01'],ISO/TC 147/SC 2,
• ISO 7887:199414837,IS,,ISO 7887:1994,Water quality — Examination and determination of colour,Qualité de l'eau — Examen et détermination de la couleur,1994-08-25,2,['13.060.60'],ISO/TC 147/SC 2,
• ISO 7889:200331880,IS,,ISO 7889:2003,Yogurt — Enumeration of characteristic microorganisms — Colony-count technique at 37 degrees C,Yaourt — Dénombrement des micro-organismes caractéristiques —
• ISO 7899-1:198414851,IS,,ISO 7899-1:1984,Water quality — Detection and enumeration of faecal streptococci — Part 1: Method by enrichment in a liquid medium,Qualité de l'eau — Recherche et dénombr
• ISO 7899-2:198414853,IS,,ISO 7899-2:1984,Water quality — Detection and enumeration of faecal streptococci — Part 2: Method by membrane filtration,Qualité de l'eau — Recherche et dénombrement des
• ISO 7900:198814855,IS,,ISO 7900:1988,Zinc-coated steel wire for fencing,Fil en acier galvanisé pour clôtures,1988-11-24,1,"['91.090','77.140.65']",ISO/TC 17/SC 17,9599,,[39138],"['en','fr']",3
• ISO 7902-1:199814857,IS,,ISO 7902-1:1998,Hydrodynamic plain journal bearings under steady-state conditions — Circular cylindrical bearings — Part 1: Calculation procedure,Paliers lisses hydrodyna
• ISO 7902-1:201363679,IS,,ISO 7902-1:2013,Hydrodynamic plain journal bearings under steady-state conditions — Circular cylindrical bearings — Part 1: Calculation procedure,Paliers lisses hydrodyna
• ISO 7902-1:202078987,IS,,ISO 7902-1:2020,Hydrodynamic plain journal bearings under steady-state conditions — Circular cylindrical bearings — Part 1: Calculation procedure,Paliers lisses hydrodyna
• ISO 7902-2:199814858,IS,,ISO 7902-2:1998,Hydrodynamic plain journal bearings under steady-state conditions — Circular cylindrical bearings — Part 2: Functions used in the calculation procedure,Pa
• ISO 7902-3:199814859,IS,,ISO 7902-3:1998,Hydrodynamic plain journal bearings under steady-state conditions — Circular cylindrical bearings — Part 3: Permissible operational parameters,Paliers lis
• ISO 7902-3:202077158,IS,,ISO 7902-3:2020,Hydrodynamic plain journal bearings under steady-state conditions — Circular cylindrical bearings — Part 3: Permissible operational parameters,Paliers lis
• ISO 7904-1:199514862,IS,,ISO 7904-1:1995,Plain bearings — Symbols — Part 1: Basic symbols,Paliers lisses — Symboles — Partie 1: Symboles de base,1995-01-19,1,['21.100.10'],ISO/TC 123/SC 6,9599,,[

← records 8,801–9,200 · All of Withdrawn and superseded ISO standards · records 9,601 on →