Records 22,801–23,200 — Withdrawn and superseded ISO standards

Records 22,801 to 23,200 of 24,640. Each links to its own page, which carries the source URL and the quoted line that states the value.

• ISO/TR 12960:19981431,TR,,ISO/TR 12960:1998,Geotextiles and geotextile-related products — Screening test method for determining the resistance to liquids,Géotextiles et produits apparentés — Méthod
• ISO/TR 13086-4:201970372,TR,,ISO/TR 13086-4:2019,Gas cylinders — Guidance for design of composite cylinders — Part 4: Cyclic fatigue of fibres and liners,Bouteilles à gaz — Recommandations pour la co
• ISO/TR 13154:200951236,TR,,ISO/TR 13154:2009,"Medical electrical equipment — Deployment, implementation and operational guidelines for identifying febrile humans using a screening thermograph","Équ
• ISO/TR 13298:199828309,TR,,ISO/TR 13298:1998,Ships and marine technology — Vocabulary of general terms,Navires et technologie maritime — Vocabulaire de termes généraux,1998-12-20,1,"['01.040.47','4
• ISO/TR 13329:201253705,TR,,ISO/TR 13329:2012,Nanomaterials — Preparation of material safety data sheet (MSDS),Nanomatériaux — Préparation des feuilles de données de sécurité des matériaux (MSDS),20
• ISO/TR 13345:199421748,TR,,ISO/TR 13345:1994,Industrial automation systems — Specification of subsets of the protocol for ISO/IEC 9506,Systèmes d'automation industrielle — Spécification de sous-ens
• ISO/TR 13353:199421763,TR,,ISO/TR 13353:1994,Diesel fuel and petrol filters for internal combustion engines — Initial efficiency by particule counting retention capacity and gravimetric efficiency,
• ISO/TR 13409:199621926,TR,,ISO/TR 13409:1996,Sterilization of health care products — Radiation sterilization — Substantiation of 25 kGy as a sterilization dose for small or infrequent production ba
• ISO/TR 13425:199521990,TR,,ISO/TR 13425:1995,Guide for the selection of statistical methods in standardization and specification,Guide pour la sélection des méthodes statistiques en normalisation e
• ISO/TR 13425:200338715,TR,,ISO/TR 13425:2003,Guidelines for the selection of statistical methods in standardization and specification,Lignes directrices pour la sélection des méthodes statistiques
• ISO/TR 13434:199825120,TR,,ISO/TR 13434:1998,Geotextiles and geotextile-related products — Guidelines on durability,Géotextiles et produits apparentés — Lignes directrices concernant la durabilité,
• ISO/TR 13438:199922003,TR,,ISO/TR 13438:1999,Geotextiles and geotextile-related products— Screening test method for determining the resistance to oxidation at elevated oxygen pressure,Géotextiles e
• ISO/TR 13499:199822129,TR,,ISO/TR 13499:1998,Road vehicles — Data exchange format for impact tests,Véhicules routiers — Format d'échange de données pour les essais de choc,1998-12-17,1,['43.020'],I
• ISO/TR 13530:199722170,TR,,ISO/TR 13530:1997,Water quality — Guide to analytical quality control for water analysis,Qualité de l'eau — Guide de contrôle qualité analytique pour l'analyse de l'eau,1
• ISO/TR 13569:199622286,TR,,ISO/TR 13569:1996,"Banking, securities and other financial services — Information security guidelines","Banque, valeurs mobilières et autres services financiers — Lignes
• ISO/TR 13569:199729380,TR,,ISO/TR 13569:1997,Banking and related financial services — Information security guidelines,Banque et services financiers liés aux opérations bancaires — Lignes directrice
• ISO/TR 13569:1997/Amd 1:199831315,TR,Amd,ISO/TR 13569:1997/Amd 1:1998,Banking and related financial services — Information security guidelines — Amendment 1,Banque et services financiers liés aux opérations b
• ISO/TR 13570:200134602,TR,,ISO/TR 13570:2001,Guidelines for the application of the ISO 7176 series on wheelchairs,Lignes directrices pour l'application de la série ISO 7176 sur les fauteuils roulan
• ISO/TR 13618:199322403,TR,,ISO/TR 13618:1993,Code of practice for the safe operation of work-holding chucks used on lathes,Lignes directrices pour l'utilisation sûre des mandrins porte-pièce de tou
• ISO/TR 13637:199723798,TR,,ISO/TR 13637:1997,Petroleum and natural gas industries — Mooring of mobile offshore drilling units (MODUS) — Design and analysis,Industries du pétrole et du gaz naturel
• ISO/TR 13739:199822336,TR,,ISO/TR 13739:1998,Petroleum products — Methods for specifying practical procedures for the transfer of bunker fuels to ships,Produits pétroliers — Méthode pour spécifier
• ISO/TR 13763:199422844,TR,,ISO/TR 13763:1994,Safety and performance criteria for seamless gas cylinders,Critères de performance et de sécurité pour les bouteilles à gaz sans soudures,1994-07-21,1,[
• ISO/TR 13763:1994/Cor 1:199627207,TR,Cor,ISO/TR 13763:1994/Cor 1:1996,Safety and performance criteria for seamless gas cylinders — Technical Corrigendum 1,Critères de performance et de sécurité pour les boute
• ISO/TR 13843:200022599,TR,,ISO/TR 13843:2000,Water quality — Guidance on validation of microbiological methods,Qualité de l'eau — Lignes directrices pour la validation des méthodes microbiologiques
• ISO/TR 13950:199723414,TR,,ISO/TR 13950:1997,Plastics pipes and fittings — Automatic recognition systems for electrofusion,Tubes et raccords en matières plastiques — Procédés de reconnaissance auto
• ISO/TR 13989-2:200023576,TR,,ISO/TR 13989-2:2000,"Calculation of scuffing load capacity of cylindrical, bevel and hypoid gears — Part 2: Integral temperature method","Calcul de la capacité de charge
• ISO/TR 14025:200026956,TR,,ISO/TR 14025:2000,Environmental labels and declarations — Type III environmental declarations,Marquage et déclarations environnementaux — Déclarations environnementales d
• ISO/TR 14032:199923150,TR,,ISO/TR 14032:1999,Environmental management — Examples of environmental performance evaluation (EPE),Management environnemental — Exemples d'évaluation de la performance e
• ISO/TR 14047:200331026,TR,,ISO/TR 14047:2003,Environmental management — Life cycle impact assessment — Examples of application of ISO 14042,Management environnemental — Evaluation de l'impact du cy
• ISO/TR 14049:200029834,TR,,ISO/TR 14049:2000,Environmental management — Life cycle assessment — Examples of application of ISO 14041 to goal and scope definition and inventory analysis,Management
• ISO/TR 14069:201343280,TR,,ISO/TR 14069:2013,Greenhouse gases — Quantification and reporting of greenhouse gas emissions for organizations — Guidance for the application of ISO 14064-1,Gaz à effet
• ISO/TR 14073:201661116,TR,,ISO/TR 14073:2016,Environmental management — Water footprint — Illustrative examples on how to apply ISO 14046,Management environnemental — Empreinte eau — Exemples illus
• ISO/TR 14105:200135607,TR,,ISO/TR 14105:2001,Electronic imaging — Human and organizational issues for successful Electronic Image Management (EIM) implementation,Imagerie électronique — Aspects hum
• ISO/TR 14121-2:200742712,TR,,ISO/TR 14121-2:2007,Safety of machinery — Risk assessment — Part 2: Practical guidance and examples of methods,Sécurité des machines — Appréciation du risque — Partie 2:
• ISO/TR 14187:201154487,TR,,ISO/TR 14187:2011,Surface chemical analysis — Characterization of nanostructured materials,Analyse chimique des surfaces - Caractérisation des matériaux nanostructurés,20
• ISO/TR 14283:199524059,TR,,ISO/TR 14283:1995,Implants for surgery — Fundamental principles,Implants chirurgicaux — Principes fondamentaux,1995-03-16,1,['11.040.40'],ISO/TC 150,9599,,[37620],"['en',
• ISO/TR 14283:200437620,TR,,ISO/TR 14283:2004,Implants for surgery — Fundamental principles,Implants chirurgicaux — Principes fondamentaux,2004-07-08,2,['11.040.40'],ISO/TC 150,9599,[24059],[68007],
• ISO/TR 14396:199624196,TR,,ISO/TR 14396:1996,Reciprocating internal combustion engines — Determination and method for the measurement of engine power,Moteurs à combustion interne — Détermination et
• ISO/TR 14521:201051227,TR,,ISO/TR 14521:2010,Gears — Calculation of load capacity of wormgears,Engrenages — Calcul de la capacité de charge des engrenages à vis,2010-11-11,1,['21.200'],ISO/TC 60/S
• ISO/TR 14577:199524844,TR,,ISO/TR 14577:1995,Metallic materials — Hardness test — Universal test,Matériaux métalliques — Essai de dureté — Essai universel,1995-12-07,1,['77.040.10'],ISO/TC 164/SC 3
• ISO/TR 14638:199525016,TR,,ISO/TR 14638:1995,Geometrical product specification (GPS) — Masterplan,Spécification géométrique des produits (GPS) — Schéma directeur,1995-11-30,1,['17.040.01'],ISO/TC 2
• ISO/TR 14645:199825054,TR,,ISO/TR 14645:1998,Road vehicles — Test procedures for evaluating child restraint system interactions with deploying air bags,Véhicules routiers — Méthodes d'essais pour l
• ISO/TR 14696:199924190,TR,,ISO/TR 14696:1999,"Reaction to fire tests — Determination of fire parameters of materials, products and assemblies using an intermediate-scale heat release calorimeter (I
• ISO/TR 14697:199724932,TR,,ISO/TR 14697:1997,Fire tests — Guidance on the choice of substrates for building products,Essais au feu — Lignes directrices sur le choix de subjectiles pour les produits
• ISO/TR 14742:201054951,TR,,ISO/TR 14742:2010,Financial services — Recommendations on cryptographic algorithms and their use,Services financiers — Recommandations sur les algorithmes cryptographique
• ISO/TR 14799-1:200538707,TR,,ISO/TR 14799-1:2005,Comparison of worldwide escalator and moving walk safety standards — Part 1: Rule by rule comparison,Comparaison des normes mondiales de sécurité des
• ISO/TR 14799-1:201562545,TR,,ISO/TR 14799-1:2015,Comparison of worldwide escalator and moving walk safety standards — Part 1: Rule by rule comparison,Comparaison des normes mondiales de sécurité des
• ISO/TR 14799-2:200538762,TR,,ISO/TR 14799-2:2005,Comparison of worldwide escalator and moving walk safety standards — Part 2: Abbreviated comparison and comments,Comparaison des normes mondiales de s
• ISO/TR 14799-2:201553959,TR,,ISO/TR 14799-2:2015,Comparison of worldwide escalator and moving walk safety standards — Part 2: Abbreviated comparison and comments,Comparaison des normes mondiales de s
• ISO/TR 14813-1:199929533,TR,,ISO/TR 14813-1:1999,Transport information and control systems — Reference model architecture(s) for the TICS sector — Part 1: TICS fundamental services,Systèmes de comman
• ISO/TR 14813-5:199929535,TR,,ISO/TR 14813-5:1999,Transport information and control systems — Reference model architecture(s) for the TICS sector — Part 5: Requirements for architecture description in
• ISO/TR 14813-6:200030622,TR,,ISO/TR 14813-6:2000,Transport information and control systems — Reference model architecture(s) for the TICS sector — Part 6: Data presentation in ASN.1,Systèmes de comma
• ISO/TR 14825:199625627,TR,,ISO/TR 14825:1996,Geographic Data Files (GDF),Fichiers de données géographiques,1996-12-12,1,"['35.240.70','03.220.01']",ISO/TC 204,9599,,[30763],['en'],440
• ISO/TR 14872:201965714,TR,,ISO/TR 14872:2019,Health informatics — Identification of medicinal products — Core principles for maintenance of identifiers and terms,Informatique de santé — Identificat
• ISO/TR 14904:199725215,TR,,ISO/TR 14904:1997,Road transport and traffic telematics — Automatic fee collection (AFC) — Interface specification for clearing between operators,Transport routier et tél
• ISO/TR 14906:199825217,TR,,ISO/TR 14906:1998,Road Transport and Traffic Telematics (RTTT) — Electronic Fee Collection (EFC) — Application interface definition for dedicated short range communicatio
• ISO/TR 14933:200125965,TR,,ISO/TR 14933:2001,Road vehicles — Test procedures for evaluating occupant interactions with deploying side impact airbags,Véhicules routiers — Méthodes d'essai pour évalu
• ISO/TR 14999-2:200539933,TR,,ISO/TR 14999-2:2005,Optics and photonics — Interferometric measurement of optical elements and optical systems — Part 2: Measurement and evaluation techniques,Optique et
• ISO/TR 15031-2:200438939,TR,,ISO/TR 15031-2:2004,"Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 2: Terms, definitions, abbreviations an
• ISO/TR 15069:199726366,TR,,ISO/TR 15069:1997,Series 1 freight containers — Handling and securing — Rationale for ISO 3874 Annex A,Conteneurs de la série 1 — Manutention et fixation — Complément à l
• ISO/TR 15144-1:201041163,TR,,ISO/TR 15144-1:2010,Calculation of micropitting load capacity of cylindrical spur and helical gears — Part 1: Introduction and basic principles,Calcul de la capacité de c
• ISO/TR 15144-1:201464038,TR,,ISO/TR 15144-1:2014,Calculation of micropitting load capacity of cylindrical spur and helical gears — Part 1: Introduction and basic principles,Calcul de la capacité de c
• ISO/TR 15144-2:201455370,TR,,ISO/TR 15144-2:2014,Calculation of micropitting load capacity of cylindrical spur and helical gears — Part 2: Examples of calculation for micropitting,Calcul de la capaci
• ISO/TR 15155:200539353,TR,,ISO/TR 15155:2005,Test facilities for agricultural irrigation equipment,Installations d'essais pour le matériel agricole d'irrigation,2005-05-11,1,['65.060.35'],ISO/TC 23
• ISO/TR 15223:199826496,TR,,ISO/TR 15223:1998,"Medical devices — Symbols to be used with medical device labels, labelling and information to be supplied","Dispositifs médicaux — Symboles à utiliser
• ISO/TR 15377:199827448,TR,,ISO/TR 15377:1998,Measurement of fluid flow by means of pressure-differential devices — Guidelines for the specification of nozzles and orifice plates beyond the scope of
• ISO/TR 15377:1998/Cor 1:199932379,TR,Cor,ISO/TR 15377:1998/Cor 1:1999,Measurement of fluid flow by means of pressure-differential devices — Guidelines for the specification of nozzles and orifice plates beyon
• ISO/TR 15377:200740029,TR,,ISO/TR 15377:2007,"Measurement of fluid flow by means of pressure-differential devices — Guidelines for the specification of orifice plates, nozzles and Venturi tubes bey
• ISO/TR 15377:201868740,TR,,ISO/TR 15377:2018,"Measurement of fluid flow by means of pressure-differential devices — Guidelines for the specification of orifice plates, nozzles and Venturi tubes bey
• ISO/TR 15462:199727046,TR,,ISO/TR 15462:1997,Water quality — Selection of tests for biodegradability,Qualité de l'eau — Sélection d'essais de biodégradabilité,1997-09-25,1,['13.060.70'],ISO/TC 147/
• ISO/TR 15489-2:200135845,TR,,ISO/TR 15489-2:2001,Information and documentation — Records management — Part 2: Guidelines,Information et documentation — << Records Management >> — Partie 2: Guide prat
• ISO/TR 15499:201255441,TR,,ISO/TR 15499:2012,Biological evaluation of medical devices — Guidance on the conduct of biological evaluation within a risk management process,Évaluation biologique des d
• ISO/TR 15510:199727298,TR,,ISO/TR 15510:1997,Stainless steels — Chemical composition,Aciers inoxydables — Composition chimique,1997-10-23,1,['77.140.20'],ISO/TC 17/SC 4,9599,,[33025],"['en','fr']",
• ISO/TR 15608:200028389,TR,,ISO/TR 15608:2000,Welding — Guidelines for a metallic materials grouping system,Soudage — Lignes directrices pour un système de groupement des matériaux métalliques,2000-
• ISO/TR 15608:200539109,TR,,ISO/TR 15608:2005,Welding — Guidelines for a metallic materials grouping system,Soudage — Lignes directrices pour un système de groupement des matériaux métalliques,2005-
• ISO/TR 15608:201357925,TR,,ISO/TR 15608:2013,Welding — Guidelines for a metallic materials grouping system,Soudage — Lignes directrices pour un système de groupement des matériaux métalliques,2013-
• ISO/TR 15608:201765667,TR,,ISO/TR 15608:2017,Welding — Guidelines for a metallic materials grouping system,Soudage — Lignes directrices pour un système de groupement des matériaux métalliques,2017-
• ISO/TR 15655:200337516,TR,,ISO/TR 15655:2003,Fire resistance — Tests for thermo-physical and mechanical properties of structural materials at elevated temperatures for fire engineering design,Résis
• ISO/TR 15801:200429093,TR,,ISO/TR 15801:2004,Electronic imaging — Information stored electronically — Recommendations for trustworthiness and reliability,Images électroniques — Stockage électroniqu
• ISO/TR 15801:200950499,TR,,ISO/TR 15801:2009,Document management — Information stored electronically — Recommendations for trustworthiness and reliability,Images électroniques — Stockage électroniq
• ISO/TR 15801:201766856,TR,,ISO/TR 15801:2017,Document management — Electronically stored information — Recommendations for trustworthiness and reliability,Gestion de document — Information stockée
• ISO/TR 15855:200128832,TR,,ISO/TR 15855:2001,"Copper, lead and zinc sulfide concentrates — Step-by-step procedure for the testing of static scales","Concentrés sulfurés de cuivre, de plomb et de zi
• ISO/TR 15916:200429145,TR,,ISO/TR 15916:2004,Basic considerations for the safety of hydrogen systems,Considérations fondamentales pour la sécurité des systèmes à l'hydrogène,2004-02-11,1,"['71.020'
• ISO/TR 15916:201556546,TR,,ISO/TR 15916:2015,Basic considerations for the safety of hydrogen systems,Considérations fondamentales pour la sécurité des systèmes à l'hydrogène,2015-12-03,2,"['71.020'
• ISO/TR 15969:200128872,TR,,ISO/TR 15969:2001,Surface chemical analysis — Depth profiling — Measurement of sputtered depth,Analyse chimique des surfaces — Profilage d'épaisseur — Mesurage de l'épais
• ISO/TR 16142:199930163,TR,,ISO/TR 16142:1999,Medical devices — Guidance on the selection of standards in support of recognized essential principles of safety and performance of medical devices,Disp
• ISO/TR 16142:200638401,TR,,ISO/TR 16142:2006,Medical devices — Guidance on the selection of standards in support of recognized essential principles of safety and performance of medical devices,Disp
• ISO/TR 16153:200437767,TR,,ISO/TR 16153:2004,Piston-operated volumetric instruments — Determination of uncertainty for volume measurements made using the photometric method,Instruments volumétrique
• ISO/TR 16158:201355739,TR,,ISO/TR 16158:2013,Space systems — Avoiding collisions with orbiting objects,Systèmes spatiaux — Évitement des collisions avec les objets en orbite,2013-11-26,1,['49.140']
• ISO/TR 16178:201055801,TR,,ISO/TR 16178:2010,Footwear — Critical substances potentially present in footwear and footwear components,Chaussures — Substances critiques potentiellement présentes dans
• ISO/TR 16178:201257945,TR,,ISO/TR 16178:2012,Footwear — Critical substances potentially present in footwear and footwear components,Chaussures — Substances critiques potentiellement présentes dans
• ISO/TR 16203:201655857,TR,,ISO/TR 16203:2016,Corrosion of metals and alloys — Guidelines for the selection of methods for particle-free erosion corrosion testing in flowing liquids,Corrosion des mé
• ISO/TR 16219:202076632,TR,,ISO/TR 16219:2020,Fans — System effects and system effect factors,Ventilateurs — Effet système et facteurs d’effet système,2020-09-07,1,['23.120'],ISO/TC 117,9599,,[87617
• ISO/TR 16224:201255922,TR,,ISO/TR 16224:2012,Technical aspects of nut design,Aspects techniques de conception des écrous,2012-03-29,1,['21.060.20'],ISO/TC 2/SC 12,9599,,[84884],['en'],15
• ISO/TR 16312-2:200742993,TR,,ISO/TR 16312-2:2007,Guidance for assessing the validity of physical fire models for obtaining fire effluent toxicity data for fire hazard and risk assessment — Part 2: Ev
• ISO/TR 16344:201256225,TR,,ISO/TR 16344:2012,"Energy performance of buildings — Common terms, definitions and symbols for the overall energy performance rating and certification","Performance énerg
• ISO/TR 16386:199930945,TR,,ISO/TR 16386:1999,Impact of changes in ISO fluid power particle counting — Contamination control and filter test standards,Conséquences des changements survenus dans les
• ISO/TR 16475:201156814,TR,,ISO/TR 16475:2011,Guidelines for the repair of water-leakage cracks in concrete structures,Lignes directrices pour la réparation des fissures dues à l'eau dans les struct
• ISO/TR 16765:200330442,TR,,ISO/TR 16765:2003,Comparison of worldwide safety standards on lifts for firefighters,Comparaison des normes de sécurité sur le plan mondial relatives à la lutte contre l'
• ISO/TR 16765:2003/Cor 1:200338891,TR,Cor,ISO/TR 16765:2003/Cor 1:2003,Comparison of worldwide safety standards on lifts for firefighters — Technical Corrigendum 1,Comparaison des normes de sécurité sur le pla
• ISO/TR 16922:201357082,TR,,ISO/TR 16922:2013,Natural gas — Odorization,Gaz naturel — Odorisation,2013-11-06,1,['75.060'],ISO/TC 193,9599,[31135],"[80964,83835]","['en','fr']",10
• ISO/TR 17068:201258087,TR,,ISO/TR 17068:2012,Information and documentation - Trusted third party repository for digital records,Information et documentation — Référentiel tiers de confiance pour le
• ISO/TR 17165-2:200635535,TR,,ISO/TR 17165-2:2006,Hydraulic fluid power — Hose assemblies — Part 2: Recommended practices for hydraulic hose assemblies,Transmissions hydrauliques — Flexibles de raccor
• ISO/TR 17252:200844692,TR,,ISO/TR 17252:2008,Fire tests — Applicability of reaction to fire tests to fire modelling and fire safety engineering,Essais au feu — Applicabilité des résultats de l'essa
• ISO/TR 17400:200333037,TR,,ISO/TR 17400:2003,"Space systems — Space launch complexes, integration sites and other facilities — General testing guidelines","Systèmes spatiaux — Complexes de lancemen
• ISO/TR 17663:200130003,TR,,ISO/TR 17663:2001,Welding — Guidelines for quality requirements for heat treatment in connection with welding and allied processes,Soudage — Lignes directrices concernant
• ISO/TR 17737:200744080,TR,,ISO/TR 17737:2007,Workplace air — Guidelines for selecting analytical methods for sampling and analysing isocyanates in air,Atmosphères des lieux de travail — Lignes dire
• ISO/TR 18128:201461521,TR,,ISO/TR 18128:2014,Information and documentation — Risk assessment for records processes and systems,Information et documentation — Evaluation du risque pour les processus
• ISO/TR 18146:201561602,TR,,ISO/TR 18146:2015,Space systems — Space debris mitigation design and operation guidelines for spacecraft,Systèmes spatiaux — Conception de mitigation des débris spatiaux
• ISO/TR 18394:200638675,TR,,ISO/TR 18394:2006,Surface chemical analysis — Auger electron spectroscopy — Derivation of chemical information,Analyse chimique des surfaces — Spectroscopie des électrons
• ISO/TR 18486:201662582,TR,,ISO/TR 18486:2016,Plastics — Parameters comparing the spectral irradiance of a laboratory light source for weathering applications to a reference solar spectral irradianc
• ISO/TR 18491:201562612,TR,,ISO/TR 18491:2015,Welding and allied processes — Guidelines for measurement of welding energies,Soudage et techniques connexes — Lignes directrices pour le mesurage des é
• ISO/TR 18529:200033499,TR,,ISO/TR 18529:2000,Ergonomics — Ergonomics of human-system interaction — Human-centred lifecycle process descriptions,Ergonomie — Ergonomie de l'interaction homme/système
• ISO/TR 18690:200633579,TR,,ISO/TR 18690:2006,"Guidance for the selection, use and maintenance of safety, protective and occupational footwear","Lignes directrices pour la sélection, l'utilisation e
• ISO/TR 18845:201763558,TR,,ISO/TR 18845:2017,Dentistry — Test methods for machining accuracy of computer-aided milling machines,Médecine bucco-dentaire — Méthodes d'essai pour l'exactitude d'usinag
• ISO/TR 18930:200131955,TR,,ISO/TR 18930:2001,Imaging materials — Protocols for outdoor weathering experiments,Matériaux pour l'image — Protocoles pour expériences de temps en extérieur,2001-05-31,1
• ISO/TR 19032:200638947,TR,,ISO/TR 19032:2006,Plastics — Use of polyethylene reference specimens (PERS) for monitoring laboratory and outdoor weathering conditions,Plastiques — Utilisation d'éprouve
• ISO/TR 19032:201977355,TR,,ISO/TR 19032:2019,Plastics — Use of polyethylene reference specimens (PERS) for monitoring laboratory and outdoor weathering conditions,Plastiques — Utilisation d'éprouve
• ISO/TR 19234:201664074,TR,,ISO/TR 19234:2016,Hydrometry — Low cost baffle solution to aid fish passage at triangular profile weirs that conform to ISO 4360,Hydrométrie — Projet de chicane à faible
• ISO/TR 19319:200333784,TR,,ISO/TR 19319:2003,"Surface chemical analysis — Auger electron spectroscopy and X-ray photoelectron spectroscopy — Determination of lateral resolution, analysis area, and
• ISO/TR 19961:200539185,TR,,ISO/TR 19961:2005,Cranes — Safety code on mobile cranes,Appareils de levage à charge suspendue — Code de sécurité sur les grues mobiles,2005-09-21,1,['53.020.20'],ISO/TC
• ISO/TR 20078-4:201976687,TR,,ISO/TR 20078-4:2019,Road vehicles — Extended vehicle (ExVe) web services — Part 4: Control,Véhicule routiers — Web services du véhicule étendu (ExVe) — Partie 4: Contrôle
• ISO/TR 20172:200639261,TR,,ISO/TR 20172:2006,Welding — Grouping systems for materials — European materials,Soudage — Systèmes de groupement des matériaux — Matériaux européens,2006-01-27,1,['25.160
• ISO/TR 20172:200950640,TR,,ISO/TR 20172:2009,Welding — Grouping systems for materials — European materials,Soudage — Systèmes de groupement des matériaux — Matériaux européens,2009-06-15,2,['25.160
• ISO/TR 20173:200539262,TR,,ISO/TR 20173:2005,Welding — Grouping systems for materials — American materials,Soudage — Systèmes de groupement des matériaux — Matériaux américains,2005-12-05,1,['25.16
• ISO/TR 20173:200951793,TR,,ISO/TR 20173:2009,Welding — Grouping systems for materials — American materials,Soudage — Systèmes de groupement des matériaux — Matériaux américains,2009-09-29,2,['25.16
• ISO/TR 20174:200539263,TR,,ISO/TR 20174:2005,Welding — Grouping systems for materials — Japanese materials,Soudage — Systèmes de groupement des matériaux — Matériaux japonais,2005-12-07,1,['25.160.
• ISO/TR 20432:200739423,TR,,ISO/TR 20432:2007,Guidelines for the determination of the long-term strength of geosynthetics for soil reinforcement,Lignes directrices pour la détermination de la résist
• ISO/TR 20432:2007/Cor 1:200852742,TR,Cor,ISO/TR 20432:2007/Cor 1:2008,Guidelines for the determination of the long-term strength of geosynthetics for soil reinforcement — Technical Corrigendum 1,Lignes direct
• ISO/TR 20461:200034183,TR,,ISO/TR 20461:2000,Determination of uncertainty for volume measurements made using the gravimetric method,Détermination de l'incertitude de mesure pour les mesurages volum
• ISO/TR 20461:2000/Cor 1:200852847,TR,Cor,ISO/TR 20461:2000/Cor 1:2008,Determination of uncertainty for volume measurements made using the gravimetric method — Technical Corrigendum 1,Détermination de l'incert
• ISO/TR 20572:200739560,TR,,ISO/TR 20572:2007,Footwear — Performance requirements for components for footwear — Accessories,Chaussures — Exigences de performance pour les composants des chaussures —
• ISO/TR 20590:201768467,TR,,ISO/TR 20590:2017,Space systems - Debris mitigation design and operation manual for launch vehicle orbital stages,Systèmes spatiaux - Conception pour l'attenuation des dé
• ISO/TR 20879:200743963,TR,,ISO/TR 20879:2007,Footwear — Performance requirements for components for footwear — Uppers,Chaussures — Exigences de performance pour les composants des chaussures — Tige
• ISO/TR 20880:200743964,TR,,ISO/TR 20880:2007,Footwear — Performance requirements for components for footwear — Outsoles,Chaussures — Exigences de performance pour les composants des chaussures — Se
• ISO/TR 20881:200743965,TR,,ISO/TR 20881:2007,Footwear — Performance requirements for components for footwear — Insoles,Chaussures — Exigences de performance pour les composants des chaussures — Pre
• ISO/TR 20882:200743966,TR,,ISO/TR 20882:2007,Footwear — Performance requirements for components for footwear — Lining and insocks,Chaussures — Exigences de performance pour les composants des chaus
• ISO/TR 20883:200743967,TR,,ISO/TR 20883:2007,Footwear — Performance requirements for components for footwear — Shanks,Chaussures — Exigences de performance pour les composants des chaussures — Camb
• ISO/TR 20983:200334359,TR,,ISO/TR 20983:2003,Information and documentation — Performance indicators for electronic library services,Information et documentation — Indicateurs de performance pour le
• ISO/TR 21089:200435645,TR,,ISO/TR 21089:2004,Health informatics — Trusted end-to-end information flows,Informatique de santé — Flux d'informations 'trusted end-to-end',2004-06-15,1,['35.240.80'],IS
• ISO/TR 21102:201354859,TR,,ISO/TR 21102:2013,Adventure tourism — Leaders — Personnel competence,Tourisme d'aventure — Leaders — Compétence du personnel,2013-08-21,1,"['03.200.10','03.080.30']",ISO/
• ISO/TR 21245-1:201670230,TR,,ISO/TR 21245-1:2016,Railway applications — Rail project planning process — Part 1: Stakeholders and their needs/interests,Applications ferroviaires - Processus de planifi
• ISO/TR 21245-2:201670251,TR,,ISO/TR 21245-2:2016,Railway applications — Rail project planning process — Part 2: Conditions,Applications ferroviaires - Processus de planification de projets ferroviair
• ISO/TR 21506:201861519,TR,,ISO/TR 21506:2018,"Project, programme and portfolio management — Vocabulary","Gestion de projet, programme et portefeuille — Vocabulaire",2018-12-03,1,"['03.100.40','01.0
• ISO/TR 21718:201771475,TR,,ISO/TR 21718:2017,Intelligent transport systems — Spatio-temporal data dictionary for cooperative ITS and automated driving systems,Systèmes de transport intelligents — D
• ISO/TR 21730:200540398,TR,,ISO/TR 21730:2005,Health informatics — Use of mobile wireless communication and computing technology in healthcare facilities — Recommendations for the management of unin
• ISO/TR 21808:200940444,TR,,ISO/TR 21808:2009,"Guidance on the selection, use, care and maintenance of personal protective equipment (PPE) designed to provide protection for firefighters","Guidage s
• ISO/TR 21808:202173744,TR,,ISO/TR 21808:2021,"Guidance on the selection, use, care and maintenance of personal protective equipment (PPE) designed to provide protection for firefighters","Lignes di
• ISO/TR 21959-1:201873927,TR,,ISO/TR 21959-1:2018,Road vehicles — Human performance and state in the context of automated driving — Part 1: Common underlying concepts,Titre manque — Partie 1: Titre ma
• ISO/TR 22100-1:201563159,TR,,ISO/TR 22100-1:2015,Safety of machinery — Relationship with ISO 12100 — Part 1: How ISO 12100 relates to type-B and type-C standards,Sécurité des machines — Relation avec
• ISO/TR 22131:201872645,TR,,ISO/TR 22131:2018,Railway applications — Railway braking — Country specific applications for ISO 20138-1,Applications ferroviaires — Freinage ferroviaire — Applications n
• ISO/TR 22201-3:201354094,TR,,ISO/TR 22201-3:2013,"Lifts (elevators), escalators and moving walks — Programmable electronic systems in safety related applications — Part 3: Life cycle guideline for pr
• ISO/TR 22221:200640783,TR,,ISO/TR 22221:2006,Health informatics - Good principles and practices for a clinical data warehouse,Informatique de santé — Principes et indications d'exploitation d'un en
• ISO/TR 22312:201156897,TR,,ISO/TR 22312:2011,Societal security — Technological capabilities,Sécurité sociétale — Capacités technologiques,2011-07-01,1,['03.100.01'],ISO/TC 292,9599,,[50049],"['en',
• ISO/TR 22411:200840933,TR,,ISO/TR 22411:2008,Ergonomics data and guidelines for the application of ISO/IEC Guide 71 to products and services to address the needs of older persons and persons with d
• ISO/TR 22514-4:200746532,TR,,ISO/TR 22514-4:2007,Statistical methods in process management — Capability and performance — Part 4: Process capability estimates and performance measures,Méthodes statis
• ISO/TR 22648:200743968,TR,,ISO/TR 22648:2007,Footwear — Performance requirements for components for footwear — Stiffeners and toepuffs,Chaussures — Exigences de performance pour les composants des
• ISO/TR 22824:200335134,TR,,ISO/TR 22824:2003,Welding consumables — Predicted and measured FN in specifications — A position statement of the experts of IIW Commission IX,Produits consommables de so
• ISO/TR 22899-2:201356733,TR,,ISO/TR 22899-2:2013,Determination of the resistance to jet fires of passive fire protection — Part 2: Guidance on classification and implementation methods,Détermination
• ISO/TR 22957:200936564,TR,,ISO/TR 22957:2009,"Document management — Analysis, selection and implementation of electronic document management systems (EDMS)","Gestion de documents — Analyse, choix e
• ISO/TR 22979:200639558,TR,,ISO/TR 22979:2006,Ophthalmic implants — Intraocular lenses — Guidance on assessment of the need for clinical investigation of intraocular lens design modifications,Implan
• ISO/TR 23107:201974571,TR,,ISO/TR 23107:2019,Criteria for assessment of new extinguishants for inclusion in the ISO 14520 series,Critères pour l'évaluation de nouveaux agents extincteurs destinés à
• ISO/TR 23107:202179442,TR,,ISO/TR 23107:2021,Criteria for assessment of new extinguishants for inclusion in the ISO 14520 series,Critères pour l'évaluation de nouveaux agents extincteurs destinés à
• ISO/TR 23462:200741519,TR,,ISO/TR 23462:2007,Space systems — Guidelines to define the management framework for a space project,Systèmes spatiaux — Lignes directrices pour définir le cadre de manage
• ISO/TR 23605:200941705,TR,,ISO/TR 23605:2009,Technical product specification (TPS) — Application guidance — International model for national implementation,Spécification technique de produits (TPS)
• ISO/TR 23975:201977493,TR,,ISO/TR 23975:2019,Traditional Chinese medicine — Priority list of single herbal medicines for developing standards,Médecine traditionnelle chinoise — Liste prioritaire de
• ISO/TR 24098:200742015,TR,,ISO/TR 24098:2007,"Intelligent transport systems — System architecture, taxonomy and terminology — Procedures for developing ITS deployment plans utilizing ITS system arc
• ISO/TR 24156:200842040,TR,,ISO/TR 24156:2008,Guidelines for using UML notation in terminology work,Lignes directrices pour l'application de la notation UML dans le travail terminologique,2008-10-30
• ISO/TR 24188:202278035,TR,,ISO/TR 24188:2022,Large outdoor fires and the built environment — Global overview of different approaches to standardization,Titre manque,2022-06-13,1,['13.220.01'],ISO/T
• ISO/TR 24464:202078836,TR,,ISO/TR 24464:2020,Automation systems and integration — Industrial data — Visualization elements of digital twins,Titre manque,2020-11-10,1,"['35.240.50','25.040.40']",ISO
• ISO/TR 24496:201261980,TR,,ISO/TR 24496:2012,Office furniture — Office work chairs — Methods for the determination of dimensions,Mobilier de bureau — Sièges de travail pour bureau — Méthodes pour d
• ISO/TR 24498:200642268,TR,,ISO/TR 24498:2006,"Paper, board and pulps — Estimation of uncertainty for test methods","Papiers, cartons et pâtes — Estimation de l'incertitude pour les méthodes d'essai
• ISO/TR 24498:201966539,TR,,ISO/TR 24498:2019,"Paper, board and pulps — Estimation of uncertainty for test methods by interlaboratory comparisons","Papiers, cartons et pâtes — Estimation de l'incert
• ISO/TR 24578:201242320,TR,,ISO/TR 24578:2012,Hydrometry — Acoustic Doppler profiler — Method and application for measurement of flow in open channels,Hydrométrie — Profils Doppler acoustiques — Mé
• ISO/TR 24666:202279332,TR,,ISO/TR 24666:2022,Sports and recreational facilities — Probes for entrapment/entanglement on playground equipment — Collection of data,Installations sportives et récréati
• ISO/TR 24971:201359587,TR,,ISO/TR 24971:2013,Medical devices — Guidance on the application of ISO 14971,Dispositifs médicaux — Directives relatives à l'ISO 14971,2013-06-19,1,['11.040.01'],ISO/TC 2
• ISO/TR 25100:200842741,TR,,ISO/TR 25100:2008,Intelligent transport systems — Systems architecture — Harmonization of ITS data concepts,Systèmes intelligents de transport — Architecture des systèmes
• ISO/TR 25107:200641958,TR,,ISO/TR 25107:2006,Non-destructive testing — Guidelines for NDT training syllabuses,Essais non destructifs — Lignes directrices pour les programmes de formation en END,200
• ISO/TR 25108:200641959,TR,,ISO/TR 25108:2006,Non-destructive testing — Guidelines for NDT personnel training organizations,Essais non destructifs — Lignes directrices pour les organismes de formati
• ISO/TR 25257:200945555,TR,,ISO/TR 25257:2009,Health informatics — Business requirements for an international coding system for medicinal products,Informatique de santé — Exigences d'affaire pour un
• ISO/TR 25679:200543056,TR,,ISO/TR 25679:2005,Mechanical testing of metals — Symbols and definitions in published standards,Essais mécaniques des métaux — Symboles et définitions figurant dans les n
• ISO/TR 25741:200843199,TR,,ISO/TR 25741:2008,Lifts and escalators subject to seismic conditions — Compilation report,Ascenseurs et escaliers mécaniques soumis aux conditions sismiques — Rapport de
• ISO/TR 25901:200743307,TR,,ISO/TR 25901:2007,Welding and related processes — Vocabulary,Soudage et techniques connexes — Vocabulaire,2007-07-03,1,"['25.160.10','01.040.25']",ISO/TC 44/SC 7,9599,,"[
• ISO/TR 26762:200843748,TR,,ISO/TR 26762:2008,Natural gas — Upstream area — Allocation of gas and condensate,Gaz naturel — Zone amont — Allocation du gaz et du condensat,2008-07-07,1,['75.060'],ISO/
• ISO/TR 27507:201035131,TR,,ISO/TR 27507:2010,Plain bearings — Recommendations for automotive crankshaft bearing environments,Paliers lisses — Recommendations pour les environnements des paliers de
• ISO/TR 27929:202467281,TR,,ISO/TR 27929:2024,Transportation of CO2 by ship,Transport de CO2 par bateau,2024-10-28,1,"['03.220.40','13.020.99']",ISO/TC 265,9599,,[91755],['en'],26
• ISO/TR 27957:200844444,TR,,ISO/TR 27957:2008,Road vehicles — Temperature measurement in anthropomorphic test devices — Definition of the temperature sensor locations,Véhicules routiers — Mesure de
• ISO/TR 28642:201144846,TR,,ISO/TR 28642:2011,Dentistry — Guidance on colour measurement,Médecine bucco-dentaire — Directives relatives au mesurage de la couleur,2011-07-01,1,['11.060.10'],ISO/TC 10
• ISO/TR 29662:200945623,TR,,ISO/TR 29662:2009,Petroleum products and other liquids — Guidance for flash point testing,Produits pétroliers et autres liquides — Lignes directrices pour la déterminatio
• ISO/TR 31700-2:202384978,TR,,ISO/TR 31700-2:2023,Consumer protection — Privacy by design for consumer goods and services — Part 2: Use cases,Protection des consommateurs — Respect de la vie privée as
• ISO/TS 210:201465538,TS,,ISO/TS 210:2014,"Essential oils — General rules for packaging, conditioning and storage","Huiles essentielles — Règles générales d'emballage, de conditionnement et de sto
• ISO/TS 211:201465539,TS,,ISO/TS 211:2014,Essential oils — General rules for labelling and marking of containers,Huiles essentielles — Règles générales d'étiquetage et de marquage des récipients,2
• ISO/TS 3567:200540194,TS,,ISO/TS 3567:2005,Vacuum gauges — Calibration by direct comparison with a reference gauge,Manomètres — Étalonnage par comparaison directe avec un manomètre de référence,20
• ISO/TS 3632-1:200339213,TS,,ISO/TS 3632-1:2003,Saffron (Crocus sativus L.) — Part 1: Specification,Safran (Crocus sativus L.) — Partie 1: Spécifications,2003-11-11,1,['67.220.10'],ISO/TC 34/SC 7,959
• ISO/TS 3632-2:200339214,TS,,ISO/TS 3632-2:2003,Saffron (Crocus sativus L.) — Part 2: Test methods,Safran (Crocus sativus L.) — Partie 2: Méthodes d'essai,2003-11-11,1,['67.220.10'],ISO/TC 34/SC 7,95
• ISO/TS 3669-2:200740193,TS,,ISO/TS 3669-2:2007,Vacuum technology — Bakable flanges — Part 2: Dimensions of knife-edge flanges,Technique du vide — Brides étuvables — Partie 2: Dimensions des brides à
• ISO/TS 3691-8:201250888,TS,,ISO/TS 3691-8:2012,Industrial trucks — Safety requirements and verification — Part 8: Regional requirements for countries outside the European Community,Chariots de manut
• ISO/TS 3716:200642863,TS,,ISO/TS 3716:2006,Hydrometry — Functional requirements and characteristics of suspended-sediment samplers,Hydrométrie — Spécifications de fonctionnement et caractéristique
• ISO/TS 4949:200337676,TS,,ISO/TS 4949:2003,Steel names based on letter symbols,Désignations des aciers fondées sur des lettres symboles,2003-06-17,1,['77.080.20'],ISO/TC 17,9599,[10965],[67751],"[
• ISO/TS 6336-20:201773529,TS,,ISO/TS 6336-20:2017,Calculation of load capacity of spur and helical gears — Part 20: Calculation of scuffing load capacity (also applicable to bevel and hypoid gears) —
• ISO/TS 6336-21:201773530,TS,,ISO/TS 6336-21:2017,Calculation of load capacity of spur and helical gears — Part 21: Calculation of scuffing load capacity (also applicable to bevel and hypoid gears) —
• ISO/TS 7240-9:200641145,TS,,ISO/TS 7240-9:2006,Fire detection and alarm systems — Part 9: Test fires for fire detectors,Systèmes de détection et d'alarme d'incendie — Partie 9: Essais sur foyers pou
• ISO/TS 7240-9:201255318,TS,,ISO/TS 7240-9:2012,Fire detection and alarm systems — Part 9: Test fires for fire detectors,Systèmes de détection et d'alarme d'incendie — Partie 9: Essais sur foyers pou
• ISO/TS 7240-29:201772262,TS,,ISO/TS 7240-29:2017,Fire detection and alarm systems — Part 29: Video fire detectors,Systèmes de détection et d'alarme d'incendie — Partie 29: Détecteurs de fumée vidéo,2
• ISO/TS 8000-1:201150798,TS,,ISO/TS 8000-1:2011,Data quality — Part 1: Overview,Qualité des données — Partie 1: Aperçu,2011-12-09,1,['25.040.40'],ISO/TC 184/SC 4,9599,,[81745],['en'],1
• ISO/TS 8000-100:200952129,TS,,ISO/TS 8000-100:2009,Data quality — Part 100: Master data: Overview,Qualité des données — Partie 100: Données permanentes: Aperçu général,2009-07-23,1,['25.040.40'],ISO/T
• ISO/TS 8000-110:200850800,TS,,ISO/TS 8000-110:2008,"Data quality — Part 110: Master data: Exchange of characteristic data: Syntax, semantic encoding, and conformance to data specification","Qualité de
• ISO/TS 8000-120:200950801,TS,,ISO/TS 8000-120:2009,Data quality — Part 120: Master data: Exchange of characteristic data: Provenance,Qualité des données — Partie 120: Données permanentes: Échange des
• ISO/TS 8000-130:200950802,TS,,ISO/TS 8000-130:2009,Data quality — Part 130: Master data: Exchange of characteristic data: Accuracy,Qualité des données — Partie 130: Données permanentes: Échange de don
• ISO/TS 8000-140:200953589,TS,,ISO/TS 8000-140:2009,Data quality — Part 140: Master data: Exchange of characteristic data: Completeness,Qualité des données — Partie 140: Données permanentes: Échange de
• ISO/TS 8000-150:201154579,TS,,ISO/TS 8000-150:2011,Data quality — Part 150: Master data: Quality management framework,Qualité des données — Partie 150: Données permanentes: Cadre de management de la q
• ISO/TS 8611-2:200534398,TS,,ISO/TS 8611-2:2005,Pallets for materials handling — Flat pallets — Part 2: Performance requirements and selection of tests,Palettes pour la manutention — Palettes plates
• ISO/TS 8611-3:200534144,TS,,ISO/TS 8611-3:2005,Pallets for materials handling — Flat pallets — Part 3: Maximum working loads,Palettes pour la manutention — Palettes plates — Partie 3: Charges maxima
• ISO/TS 9250-1:200435097,TS,,ISO/TS 9250-1:2004,Earth-moving machinery — Multilingual listing of equivalent terms — Part 1: General,Engins de terrassement — Liste multilingue de termes équivalents —
• ISO/TS 9250-2:200435098,TS,,ISO/TS 9250-2:2004,Earth-moving machinery — Multilingual listing of equivalent terms — Part 2: Performance and dimensions,Engins de terrassement — Liste multilingue de te
• ISO/TS 9491-1:202383516,TS,,ISO/TS 9491-1:2023,"Biotechnology — Predictive computational models in personalized medicine research — Part 1: Constructing, verifying and validating models","Biotechnol
• ISO/TS 9516-2:202466473,TS,,ISO/TS 9516-2:2024,Iron ores — Determination of various elements by X-ray fluorescence spectrometry — Part 2: Single element calibration procedure,Titre manque — Partie 2
• ISO/TS 9941:200337698,TS,,ISO/TS 9941:2003,Milk and canned evaporated milk — Determination of tin content — Spectrometric method,Lait et lait concentré non sucré en boîte — Détermination de la ten
• ISO/TS 10004:201038063,TS,,ISO/TS 10004:2010,Quality management — Customer satisfaction — Guidelines for monitoring and measuring,Management de la qualité — Satisfaction du client — Lignes directri
• ISO/TS 10128:200945831,TS,,ISO/TS 10128:2009,Graphic technology — Methods of adjustment of the colour reproduction of a printing system to match a set of characterization data,Technologie graphique
• ISO/TS 10272-2:200637092,TS,,ISO/TS 10272-2:2006,Microbiology of food and animal feeding stuffs — Horizontal method for detection and enumeration of Campylobacter spp. — Part 2: Colony-count techniqu
• ISO/TS 10303-15:202177289,TS,,ISO/TS 10303-15:2021,Industrial automation systems and integration — Product data representation and exchange — Part 15: Description methods: SysML XMI to XSD transformat
• ISO/TS 10303-28:200334535,TS,,ISO/TS 10303-28:2003,Industrial automation systems and integration — Product data representation and exchange — Part 28: Implementation methods: XML representations of EX
• ISO/TS 10303-203:200539522,TS,,ISO/TS 10303-203:2005,Industrial automation systems and integration — Product data representation and exchange — Part 203: Application protocol: Configuration controlled
• ISO/TS 10303-324:199933028,TS,,ISO/TS 10303-324:1999,Industrial automation systems and integration — Product data representation and exchange — Part 324: Abstract test suite: Mechanical product definit
• ISO/TS 10303-400:202383846,TS,,ISO/TS 10303-400:2023,Industrial automation systems and integration — Product data representation and exchange — Part 400: Reference schema for SysML mapping,Systèmes d'a
• ISO/TS 10303-400:202489542,TS,,ISO/TS 10303-400:2024,Industrial automation systems and integration — Product data representation and exchange — Part 400: Reference schema for SysML mapping,Systèmes d'a
• ISO/TS 10303-403:200539521,TS,,ISO/TS 10303-403:2005,Industrial automation systems and integration — Product data representation and exchange — Part 403: Application module: AP203 Configuration control
• ISO/TS 10303-403:200852599,TS,,ISO/TS 10303-403:2008,Industrial automation systems and integration — Product data representation and exchange — Part 403: Application module: AP203 configuration control
• ISO/TS 10303-409:201463193,TS,,ISO/TS 10303-409:2014,Industrial automation systems and integration — Product data representation and exchange — Part 409: Application module: AP209 multidisciplinary ana
• ISO/TS 10303-410:200642391,TS,,ISO/TS 10303-410:2006,Industrial automation systems and integration — Product data representation and exchange — Part 410: Application module: AP210 electronic assembly i
• ISO/TS 10303-410:201056278,TS,,ISO/TS 10303-410:2010,Industrial automation systems and integration — Product data representation and exchange — Part 410: Application module: AP210 electronic assembly i
• ISO/TS 10303-410:201464296,TS,,ISO/TS 10303-410:2014,Industrial automation systems and integration — Product data representation and exchange — Part 410: Application module: AP210 electronic assembly i
• ISO/TS 10303-410:201876137,TS,,ISO/TS 10303-410:2018,Industrial automation systems and integration — Product data representation and exchange — Part 410: Application module: AP210 electronic assembly i
• ISO/TS 10303-410:201978592,TS,,ISO/TS 10303-410:2019,Industrial automation systems and integration — Product data representation and exchange — Part 410: Application module: AP210 electronic assembly i
• ISO/TS 10303-410:202284666,TS,,ISO/TS 10303-410:2022,Industrial automation systems and integration — Product data representation and exchange — Part 410: Application module: AP210 electronic assembly i
• ISO/TS 10303-433:201050849,TS,,ISO/TS 10303-433:2010,Industrial automation systems and integration — Product data representation and exchange — Part 433: Application module: AP233 systems engineering,S
• ISO/TS 10303-439:200539364,TS,,ISO/TS 10303-439:2005,Industrial automation systems and integration — Product data representation and exchange — Part 439: Application module: AP239 product life cycle su
• ISO/TS 10303-439:201057008,TS,,ISO/TS 10303-439:2010,Industrial automation systems and integration — Product data representation and exchange — Part 439: AP239 product life cycle support,Systèmes d'aut
• ISO/TS 10303-439:201160675,TS,,ISO/TS 10303-439:2011,Industrial automation systems and integration — Product data representation and exchange — Part 439: Application module: AP239 product life cycle su
• ISO/TS 10303-439:202387152,TS,,ISO/TS 10303-439:2023,Industrial automation systems and integration — Product data representation and exchange — Part 439: Application module: AP239 product life cycle su
• ISO/TS 10303-442:201464503,TS,,ISO/TS 10303-442:2014,Industrial automation systems and integration — Product data representation and exchange — Part 442: Application module: AP242 managed model based 3
• ISO/TS 10303-442:201876138,TS,,ISO/TS 10303-442:2018,Industrial automation systems and integration — Product data representation and exchange — Part 442: Application module: AP242 managed model based 3
• ISO/TS 10303-442:201978593,TS,,ISO/TS 10303-442:2019,Industrial automation systems and integration — Product data representation and exchange — Part 442: Application module: AP242 managed model based 3
• ISO/TS 10303-442:202284681,TS,,ISO/TS 10303-442:2022,Industrial automation systems and integration — Product data representation and exchange — Part 442: Application module: AP242 managed model based 3
• ISO/TS 10303-442:202387074,TS,,ISO/TS 10303-442:2023,Industrial automation systems and integration — Product data representation and exchange — Part 442: Application module: AP242 managed model based 3
• ISO/TS 10303-442:202489543,TS,,ISO/TS 10303-442:2024,Industrial automation systems and integration — Product data representation and exchange — Part 442: Application module: AP242 managed model based 3
• ISO/TS 10303-1001:200133602,TS,,ISO/TS 10303-1001:2001,Industrial automation systems and integration — Product data representation and exchange — Part 1001: Application module: Appearence assignment,Sys
• ISO/TS 10303-1001:200439878,TS,,ISO/TS 10303-1001:2004,Industrial automation systems and integration — Product data representation and exchange — Part 1001: Application module: Appearance assignment,Sys
• ISO/TS 10303-1001:200644785,TS,,ISO/TS 10303-1001:2006,Industrial automation systems and integration — Product data representation and exchange — Part 1001: Application module: Appearance assignment,Sys
• ISO/TS 10303-1001:200852540,TS,,ISO/TS 10303-1001:2008,Industrial automation systems and integration — Product data representation and exchange — Part 1001: Application module: Appearance assignment,Sys
• ISO/TS 10303-1001:201056825,TS,,ISO/TS 10303-1001:2010,Industrial automation systems and integration — Product data representation and exchange — Part 1001: Application module: Appearance assignment,Sys
• ISO/TS 10303-1001:201464301,TS,,ISO/TS 10303-1001:2014,Industrial automation systems and integration — Product data representation and exchange — Part 1001: Application module: Appearance assignment,Sys
• ISO/TS 10303-1001:201876141,TS,,ISO/TS 10303-1001:2018,Industrial automation systems and integration — Product data representation and exchange — Part 1001: Application module: Appearance assignment,Sys
• ISO/TS 10303-1001:201978596,TS,,ISO/TS 10303-1001:2019,Industrial automation systems and integration — Product data representation and exchange — Part 1001: Application module: Appearance assignment,Sys
• ISO/TS 10303-1002:200133603,TS,,ISO/TS 10303-1002:2001,Industrial automation systems and integration — Product data representation and exchange — Part 1002: Application module: Colour,Systèmes d'automat
• ISO/TS 10303-1002:200644786,TS,,ISO/TS 10303-1002:2006,Industrial automation systems and integration — Product data representation and exchange — Part 1002: Application module: Colour,Systèmes d'automat
• ISO/TS 10303-1003:200133604,TS,,ISO/TS 10303-1003:2001,Industrial automation systems and integration — Product data representation and exchange — Part 1003: Application module: Curve appearance,Systèmes
• ISO/TS 10303-1003:200644787,TS,,ISO/TS 10303-1003:2006,Industrial automation systems and integration — Product data representation and exchange — Part 1003: Application module: Curve appearance,Systèmes
• ISO/TS 10303-1003:200852541,TS,,ISO/TS 10303-1003:2008,Industrial automation systems and integration — Product data representation and exchange — Part 1003: Application module: Curve appearance,Systèmes
• ISO/TS 10303-1003:201056923,TS,,ISO/TS 10303-1003:2010,Industrial automation systems and integration — Product data representation and exchange — Part 1003: Application module: Curve appearance,Systèmes
• ISO/TS 10303-1003:201464303,TS,,ISO/TS 10303-1003:2014,Industrial automation systems and integration — Product data representation and exchange — Part 1003: Application module: Curve appearance,Systèmes
• ISO/TS 10303-1004:200133608,TS,,ISO/TS 10303-1004:2001,Industrial automation systems and integration — Product data representation and exchange — Part 1004: Application module: Elemental geometric shape
• ISO/TS 10303-1004:200437817,TS,,ISO/TS 10303-1004:2004,Industrial automation systems and integration — Product data representation and exchange — Part 1004: Application module: Elemental geometric shape
• ISO/TS 10303-1004:200644788,TS,,ISO/TS 10303-1004:2006,Industrial automation systems and integration — Product data representation and exchange — Part 1004: Application module: Elemental geometric shape
• ISO/TS 10303-1004:200852542,TS,,ISO/TS 10303-1004:2008,Industrial automation systems and integration — Product data representation and exchange — Part 1004: Application module: Elemental geometric shape
• ISO/TS 10303-1004:201056924,TS,,ISO/TS 10303-1004:2010,Industrial automation systems and integration — Product data representation and exchange — Part 1004: Application module: Elemental geometric shape
• ISO/TS 10303-1004:201160621,TS,,ISO/TS 10303-1004:2011,Industrial automation systems and integration — Product data representation and exchange — Part 1004: Application module: Elemental geometric shape
• ISO/TS 10303-1004:201463285,TS,,ISO/TS 10303-1004:2014,Industrial automation systems and integration — Product data representation and exchange — Part 1004: Application module: Elemental geometric shape
• ISO/TS 10303-1004:201876142,TS,,ISO/TS 10303-1004:2018,Industrial automation systems and integration — Product data representation and exchange — Part 1004: Application module: Elemental geometric shape
• ISO/TS 10303-1004:201978598,TS,,ISO/TS 10303-1004:2019,Industrial automation systems and integration — Product data representation and exchange — Part 1004: Application module: Elemental geometric shape
• ISO/TS 10303-1004:202284683,TS,,ISO/TS 10303-1004:2022,Industrial automation systems and integration — Product data representation and exchange — Part 1004: Application module: Elemental geometric shape
• ISO/TS 10303-1005:200133609,TS,,ISO/TS 10303-1005:2001,Industrial automation systems and integration — Product data representation and exchange — Part 1005: Application module: Elemental topology,Systèm
• ISO/TS 10303-1005:201056925,TS,,ISO/TS 10303-1005:2010,Industrial automation systems and integration — Product data representation and exchange — Part 1005: Application module: Elemental topology,Systèm
• ISO/TS 10303-1005:201464304,TS,,ISO/TS 10303-1005:2014,Industrial automation systems and integration — Product data representation and exchange — Part 1005: Application module: Elemental topology,Systèm
• ISO/TS 10303-1005:201876143,TS,,ISO/TS 10303-1005:2018,Industrial automation systems and integration — Product data representation and exchange — Part 1005: Application module: Elemental topology,Systèm
• ISO/TS 10303-1005:201979335,TS,,ISO/TS 10303-1005:2019,Industrial automation systems and integration — Product data representation and exchange — Part 1005: Application module: Elemental topology,Systèm
• ISO/TS 10303-1005:202284684,TS,,ISO/TS 10303-1005:2022,Industrial automation systems and integration — Product data representation and exchange — Part 1005: Application module: Elemental topology,Systèm
• ISO/TS 10303-1006:200133610,TS,,ISO/TS 10303-1006:2001,Industrial automation systems and integration — Product data representation and exchange — Part 1006: Application module: Foundation representation
• ISO/TS 10303-1006:200437816,TS,,ISO/TS 10303-1006:2004,Industrial automation systems and integration — Product data representation and exchange — Part 1006: Application module: Foundation representation
• ISO/TS 10303-1006:200644818,TS,,ISO/TS 10303-1006:2006,Industrial automation systems and integration — Product data representation and exchange — Part 1006: Application module: Foundation representation
• ISO/TS 10303-1006:201056926,TS,,ISO/TS 10303-1006:2010,Industrial automation systems and integration — Product data representation and exchange — Part 1006: Application module: Foundation representation
• ISO/TS 10303-1006:201978599,TS,,ISO/TS 10303-1006:2019,Industrial automation systems and integration — Product data representation and exchange — Part 1006: Application module: Foundation representation
• ISO/TS 10303-1007:200133611,TS,,ISO/TS 10303-1007:2001,Industrial automation systems and integration — Product data representation and exchange — Part 1007: Application module: General surface appearanc
• ISO/TS 10303-1007:200852543,TS,,ISO/TS 10303-1007:2008,Industrial automation systems and integration — Product data representation and exchange — Part 1007: Application module: General surface appearanc
• ISO/TS 10303-1008:200133612,TS,,ISO/TS 10303-1008:2001,Industrial automation systems and integration — Product data representation and exchange — Part 1008: Application module: Layer assignment,Systèmes
• ISO/TS 10303-1008:200852544,TS,,ISO/TS 10303-1008:2008,Industrial automation systems and integration — Product data representation and exchange — Part 1008: Application module: Layer assignment,Systèmes
• ISO/TS 10303-1009:200133613,TS,,ISO/TS 10303-1009:2001,Industrial automation systems and integration — Product data representation and exchange — Part 1009: Application module: Shape appearance and laye
• ISO/TS 10303-1009:200852545,TS,,ISO/TS 10303-1009:2008,Industrial automation systems and integration — Product data representation and exchange — Part 1009: Application module: Shape appearance layers,S
• ISO/TS 10303-1010:200437902,TS,,ISO/TS 10303-1010:2004,Industrial automation systems and integration — Product data representation and exchange — Part 1010: Application module: Date time,Systèmes d'auto
• ISO/TS 10303-1011:200437903,TS,,ISO/TS 10303-1011:2004,Industrial automation systems and integration — Product data representation and exchange — Part 1011: Application module: Person organization,Systè
• ISO/TS 10303-1012:200437904,TS,,ISO/TS 10303-1012:2004,Industrial automation systems and integration — Product data representation and exchange — Part 1012: Application module: Approval,Systèmes d'autom
• ISO/TS 10303-1012:200852546,TS,,ISO/TS 10303-1012:2008,Industrial automation systems and integration — Product data representation and exchange — Part 1012: Application module: Approval,Systèmes d'autom
• ISO/TS 10303-1012:201056250,TS,,ISO/TS 10303-1012:2010,Industrial automation systems and integration — Product data representation and exchange — Part 1012: Application module: Approval,Systèmes d'autom
• ISO/TS 10303-1012:201876144,TS,,ISO/TS 10303-1012:2018,Industrial automation systems and integration — Product data representation and exchange — Part 1012: Application module: Approval,Systèmes d'autom
• ISO/TS 10303-1012:202387075,TS,,ISO/TS 10303-1012:2023,Industrial automation systems and integration — Product data representation and exchange — Part 1012: Application module: Approval,Systèmes d'autom
• ISO/TS 10303-1013:200437905,TS,,ISO/TS 10303-1013:2004,Industrial automation systems and integration — Product data representation and exchange — Part 1013: Application module: Person organization assig
• ISO/TS 10303-1013:201160622,TS,,ISO/TS 10303-1013:2011,Industrial automation systems and integration — Product data representation and exchange — Part 1013: Application module: Person organization assig
• ISO/TS 10303-1014:200437906,TS,,ISO/TS 10303-1014:2004,Industrial automation systems and integration — Product data representation and exchange — Part 1014: Application module: Date time assignment,Syst
• ISO/TS 10303-1016:200437908,TS,,ISO/TS 10303-1016:2004,Industrial automation systems and integration — Product data representation and exchange — Part 1016: Application module: Product categorization,Sy
• ISO/TS 10303-1017:200437909,TS,,ISO/TS 10303-1017:2004,Industrial automation systems and integration — Product data representation and exchange — Part 1017: Application module: Product identification,Sy
• ISO/TS 10303-1019:200437911,TS,,ISO/TS 10303-1019:2004,Industrial automation systems and integration — Product data representation and exchange — Part 1019: Application module: Product view definition,S
• ISO/TS 10303-1019:200644819,TS,,ISO/TS 10303-1019:2006,Industrial automation systems and integration — Product data representation and exchange — Part 1019: Application module: Product view definition,S
• ISO/TS 10303-1019:201876145,TS,,ISO/TS 10303-1019:2018,Industrial automation systems and integration — Product data representation and exchange — Part 1019: Application module: Product view definition,S
• ISO/TS 10303-1019:201978600,TS,,ISO/TS 10303-1019:2019,Industrial automation systems and integration — Product data representation and exchange — Part 1019: Application module: Product view definition,S
• ISO/TS 10303-1019:202387082,TS,,ISO/TS 10303-1019:2023,Industrial automation systems and integration — Product data representation and exchange — Part 1019: Application module: Product view definition,S
• ISO/TS 10303-1019:202489561,TS,,ISO/TS 10303-1019:2024,Industrial automation systems and integration — Product data representation and exchange — Part 1019: Application module: Product view definition,S
• ISO/TS 10303-1020:200437918,TS,,ISO/TS 10303-1020:2004,Industrial automation systems and integration — Product data representation and exchange — Part 1020: Application module: Product version relations
• ISO/TS 10303-1021:200437912,TS,,ISO/TS 10303-1021:2004,Industrial automation systems and integration — Product data representation and exchange — Part 1021: Application module: Identification assignment
• ISO/TS 10303-1022:200437913,TS,,ISO/TS 10303-1022:2004,Industrial automation systems and integration — Product data representation and exchange — Part 1022: Application module: Part and version identifi
• ISO/TS 10303-1022:200852947,TS,,ISO/TS 10303-1022:2008,Industrial automation systems and integration — Product data representation and exchange — Part 1022: Application module: Part and version identifi
• ISO/TS 10303-1022:201056361,TS,,ISO/TS 10303-1022:2010,Industrial automation systems and integration — Product data representation and exchange — Part 1022: Application module: Part and version identifi
• ISO/TS 10303-1023:200437914,TS,,ISO/TS 10303-1023:2004,Industrial automation systems and integration — Product data representation and exchange — Part 1023: Application module: Part view definition,Syst
• ISO/TS 10303-1023:201464308,TS,,ISO/TS 10303-1023:2014,Industrial automation systems and integration — Product data representation and exchange — Part 1023: Application module: Part view definition,Syst
• ISO/TS 10303-1025:200437915,TS,,ISO/TS 10303-1025:2004,Industrial automation systems and integration — Product data representation and exchange — Part 1025: Application module: Alias identification,Syst
• ISO/TS 10303-1025:200852547,TS,,ISO/TS 10303-1025:2008,Industrial automation systems and integration — Product data representation and exchange — Part 1025: Application module: Alias identification,Syst
• ISO/TS 10303-1025:201160757,TS,,ISO/TS 10303-1025:2011,Industrial automation systems and integration — Product data representation and exchange — Part 1025: Application module: Alias identification,Syst
• ISO/TS 10303-1026:200437920,TS,,ISO/TS 10303-1026:2004,Industrial automation systems and integration — Product data representation and exchange — Part 1026: Application module: Assembly structure,Systèm
• ISO/TS 10303-1026:200852548,TS,,ISO/TS 10303-1026:2008,Industrial automation systems and integration — Product data representation and exchange — Part 1026: Application module: Assembly structure,Systèm
• ISO/TS 10303-1026:201056251,TS,,ISO/TS 10303-1026:2010,Industrial automation systems and integration — Product data representation and exchange — Part 1026: Application module: Assembly structure,Systèm
• ISO/TS 10303-1026:201464309,TS,,ISO/TS 10303-1026:2014,Industrial automation systems and integration — Product data representation and exchange — Part 1026: Application module: Assembly structure,Systèm
• ISO/TS 10303-1026:201876147,TS,,ISO/TS 10303-1026:2018,Industrial automation systems and integration — Product data representation and exchange — Part 1026: Application module: Assembly structure,Systèm
• ISO/TS 10303-1026:201978602,TS,,ISO/TS 10303-1026:2019,Industrial automation systems and integration — Product data representation and exchange — Part 1026: Application module: Assembly structure,Systèm
• ISO/TS 10303-1027:200437921,TS,,ISO/TS 10303-1027:2004,Industrial automation systems and integration — Product data representation and exchange — Part 1027: Application module: Contextual shape position
• ISO/TS 10303-1027:200644821,TS,,ISO/TS 10303-1027:2006,Industrial automation systems and integration — Product data representation and exchange — Part 1027: Application module: Contextual shape position
• ISO/TS 10303-1027:200852553,TS,,ISO/TS 10303-1027:2008,Industrial automation systems and integration — Product data representation and exchange — Part 1027: Application module: Contextual shape position
• ISO/TS 10303-1027:201056930,TS,,ISO/TS 10303-1027:2010,Industrial automation systems and integration — Product data representation and exchange — Part 1027: Application module: Contextual shape position
• ISO/TS 10303-1027:201464310,TS,,ISO/TS 10303-1027:2014,Industrial automation systems and integration — Product data representation and exchange — Part 1027: Application module: Contextual shape position
• ISO/TS 10303-1027:201876148,TS,,ISO/TS 10303-1027:2018,Industrial automation systems and integration — Product data representation and exchange — Part 1027: Application module: Contextual shape position
• ISO/TS 10303-1027:201978603,TS,,ISO/TS 10303-1027:2019,Industrial automation systems and integration — Product data representation and exchange — Part 1027: Application module: Contextual shape position
• ISO/TS 10303-1030:200437944,TS,,ISO/TS 10303-1030:2004,Industrial automation systems and integration — Product data representation and exchange — Part 1030: Application module: Property assignment,Systè
• ISO/TS 10303-1030:200644822,TS,,ISO/TS 10303-1030:2006,Industrial automation systems and integration — Product data representation and exchange — Part 1030: Application module: Property assignment,Systè
• ISO/TS 10303-1030:201464311,TS,,ISO/TS 10303-1030:2014,Industrial automation systems and integration — Product data representation and exchange — Part 1030: Application module: Property assignment,Systè
• ISO/TS 10303-1030:201978604,TS,,ISO/TS 10303-1030:2019,Industrial automation systems and integration — Product data representation and exchange — Part 1030: Application module: Property assignment,Systè
• ISO/TS 10303-1032:200437945,TS,,ISO/TS 10303-1032:2004,Industrial automation systems and integration — Product data representation and exchange — Part 1032: Application module: Shape property assignment
• ISO/TS 10303-1032:200644823,TS,,ISO/TS 10303-1032:2006,Industrial automation systems and integration — Product data representation and exchange — Part 1032: Application module: Shape property assignment
• ISO/TS 10303-1032:200852554,TS,,ISO/TS 10303-1032:2008,Industrial automation systems and integration — Product data representation and exchange — Part 1032: Application module: Shape property assignment
• ISO/TS 10303-1032:201056931,TS,,ISO/TS 10303-1032:2010,Industrial automation systems and integration — Product data representation and exchange — Part 1032: Application module: Shape property assignment
• ISO/TS 10303-1032:201464312,TS,,ISO/TS 10303-1032:2014,Industrial automation systems and integration — Product data representation and exchange — Part 1032: Application module: Shape property assignment
• ISO/TS 10303-1032:201876149,TS,,ISO/TS 10303-1032:2018,Industrial automation systems and integration — Product data representation and exchange — Part 1032: Application module: Shape property assignment
• ISO/TS 10303-1032:201978605,TS,,ISO/TS 10303-1032:2019,Industrial automation systems and integration — Product data representation and exchange — Part 1032: Application module: Shape property assignment
• ISO/TS 10303-1032:202387084,TS,,ISO/TS 10303-1032:2023,Industrial automation systems and integration — Product data representation and exchange — Part 1032: Application module: Shape property assignment
• ISO/TS 10303-1033:200437952,TS,,ISO/TS 10303-1033:2004,Industrial automation systems and integration — Product data representation and exchange — Part 1033: Application module: External model,Systèmes d
• ISO/TS 10303-1034:200437946,TS,,ISO/TS 10303-1034:2004,Industrial automation systems and integration — Product data representation and exchange — Part 1034: Application module: Product view definition p
• ISO/TS 10303-1038:200437948,TS,,ISO/TS 10303-1038:2004,Industrial automation systems and integration — Product data representation and exchange — Part 1038: Application module: Independent property repr
• ISO/TS 10303-1040:200437949,TS,,ISO/TS 10303-1040:2004,Industrial automation systems and integration — Product data representation and exchange — Part 1040: Application module: Process property assignme
• ISO/TS 10303-1041:200437922,TS,,ISO/TS 10303-1041:2004,Industrial automation systems and integration — Product data representation and exchange — Part 1041: Application module: Product view definition r
• ISO/TS 10303-1041:201464315,TS,,ISO/TS 10303-1041:2014,Industrial automation systems and integration — Product data representation and exchange — Part 1041: Application module: Product view definition r
• ISO/TS 10303-1042:200437926,TS,,ISO/TS 10303-1042:2004,Industrial automation systems and integration — Product data representation and exchange — Part 1042: Application module: Work request,Systèmes d'a
• ISO/TS 10303-1042:201464316,TS,,ISO/TS 10303-1042:2014,Industrial automation systems and integration — Product data representation and exchange — Part 1042: Application module: Work request,Systèmes d'a
• ISO/TS 10303-1043:200437927,TS,,ISO/TS 10303-1043:2004,Industrial automation systems and integration — Product data representation and exchange — Part 1043: Application module: Work order,Systèmes d'aut
• ISO/TS 10303-1043:201464317,TS,,ISO/TS 10303-1043:2014,Industrial automation systems and integration — Product data representation and exchange — Part 1043: Application module: Work order,Systèmes d'aut
• ISO/TS 10303-1046:200437924,TS,,ISO/TS 10303-1046:2004,Industrial automation systems and integration — Product data representation and exchange — Part 1046: Application module: Product replacement,Systè
• ISO/TS 10303-1047:200437928,TS,,ISO/TS 10303-1047:2004,Industrial automation systems and integration — Product data representation and exchange — Part 1047: Application module: Activity,Systèmes d'autom
• ISO/TS 10303-1047:201056932,TS,,ISO/TS 10303-1047:2010,Industrial automation systems and integration — Product data representation and exchange — Part 1047: Application module: Activity,Systèmes d'autom
• ISO/TS 10303-1049:200437929,TS,,ISO/TS 10303-1049:2004,Industrial automation systems and integration — Product data representation and exchange — Part 1049: Application module: Activity method,Systèmes
• ISO/TS 10303-1050:200539463,TS,,ISO/TS 10303-1050:2005,Industrial automation systems and integration — Product data representation and exchange — Part 1050: Application module: Dimension tolerance,Systè
• ISO/TS 10303-1050:200645038,TS,,ISO/TS 10303-1050:2006,Industrial automation systems and integration — Product data representation and exchange — Part 1050: Application module: Dimension tolerance,Systè
• ISO/TS 10303-1050:201056933,TS,,ISO/TS 10303-1050:2010,Industrial automation systems and integration — Product data representation and exchange — Part 1050: Application module: Dimension tolerance,Systè
• ISO/TS 10303-1050:201464320,TS,,ISO/TS 10303-1050:2014,Industrial automation systems and integration — Product data representation and exchange — Part 1050: Application module: Dimension tolerance,Systè
• ISO/TS 10303-1050:201876160,TS,,ISO/TS 10303-1050:2018,Industrial automation systems and integration — Product data representation and exchange — Part 1050: Application module: Dimension tolerance,Systè
• ISO/TS 10303-1050:201978607,TS,,ISO/TS 10303-1050:2019,Industrial automation systems and integration — Product data representation and exchange — Part 1050: Application module: Dimension tolerance,Systè
• ISO/TS 10303-1050:202489603,TS,,ISO/TS 10303-1050:2024,Industrial automation systems and integration — Product data representation and exchange — Part 1050: Application module: Dimension tolerance,Systè
• ISO/TS 10303-1051:200539466,TS,,ISO/TS 10303-1051:2005,Industrial automation systems and integration — Product data representation and exchange — Part 1051: Application module: Geometric tolerance,Systè
• ISO/TS 10303-1051:200645039,TS,,ISO/TS 10303-1051:2006,Industrial automation systems and integration — Product data representation and exchange — Part 1051: Application module: Geometric tolerance,Systè
• ISO/TS 10303-1051:201056934,TS,,ISO/TS 10303-1051:2010,Industrial automation systems and integration — Product data representation and exchange — Part 1051: Application module: Geometric tolerance,Systè
• ISO/TS 10303-1051:201467918,TS,,ISO/TS 10303-1051:2014,Industrial automation systems and integration — Product data representation and exchange — Part 1051: Application module: Geometric tolerance,Systè
• ISO/TS 10303-1051:201876161,TS,,ISO/TS 10303-1051:2018,Industrial automation systems and integration — Product data representation and exchange — Part 1051: Application module: Geometric tolerance,Systè
• ISO/TS 10303-1051:201978608,TS,,ISO/TS 10303-1051:2019,Industrial automation systems and integration — Product data representation and exchange — Part 1051: Application module: Geometric tolerance,Systè
• ISO/TS 10303-1051:202489604,TS,,ISO/TS 10303-1051:2024,Industrial automation systems and integration — Product data representation and exchange — Part 1051: Application module: Geometric tolerance,Systè
• ISO/TS 10303-1052:200539467,TS,,ISO/TS 10303-1052:2005,Industrial automation systems and integration — Product data representation and exchange — Part 1052: Application module: Default tolerance,Système
• ISO/TS 10303-1052:200750850,TS,,ISO/TS 10303-1052:2007,Industrial automation systems and integration — Product data representation and exchange — Part 1052: Application module: Default tolerance,Système
• ISO/TS 10303-1054:200437950,TS,,ISO/TS 10303-1054:2004,Industrial automation systems and integration — Product data representation and exchange — Part 1054: Application module: Value with unit,Systèmes
• ISO/TS 10303-1054:201464323,TS,,ISO/TS 10303-1054:2014,Industrial automation systems and integration — Product data representation and exchange — Part 1054: Application module: Value with unit,Systèmes
• ISO/TS 10303-1054:201876162,TS,,ISO/TS 10303-1054:2018,Industrial automation systems and integration — Product data representation and exchange — Part 1054: Application module: Value with unit,Systèmes
• ISO/TS 10303-1055:200437925,TS,,ISO/TS 10303-1055:2004,Industrial automation systems and integration — Product data representation and exchange — Part 1055: Application module: Part definition relations
• ISO/TS 10303-1055:201876163,TS,,ISO/TS 10303-1055:2018,Industrial automation systems and integration — Product data representation and exchange — Part 1055: Application module: Part definition relations
• ISO/TS 10303-1056:200437930,TS,,ISO/TS 10303-1056:2004,Industrial automation systems and integration — Product data representation and exchange — Part 1056: Application module: Configuration item,Systèm
• ISO/TS 10303-1057:200437931,TS,,ISO/TS 10303-1057:2004,Industrial automation systems and integration — Product data representation and exchange — Part 1057: Application module: Effectivity,Systèmes d'au
• ISO/TS 10303-1058:200437932,TS,,ISO/TS 10303-1058:2004,Industrial automation systems and integration — Product data representation and exchange — Part 1058: Application module: Configuration effectivity
• ISO/TS 10303-1058:201056262,TS,,ISO/TS 10303-1058:2010,Industrial automation systems and integration — Product data representation and exchange — Part 1058: Application module: Configuration effectivity
• ISO/TS 10303-1059:200437933,TS,,ISO/TS 10303-1059:2004,Industrial automation systems and integration — Product data representation and exchange — Part 1059: Application module: Effectivity application,S
• ISO/TS 10303-1061:200437916,TS,,ISO/TS 10303-1061:2004,Industrial automation systems and integration — Product data representation and exchange — Part 1061: Application module: Project,Systèmes d'automa
• ISO/TS 10303-1061:200644827,TS,,ISO/TS 10303-1061:2006,Industrial automation systems and integration — Product data representation and exchange — Part 1061: Application module: Project,Systèmes d'automa
• ISO/TS 10303-1062:200437917,TS,,ISO/TS 10303-1062:2004,Industrial automation systems and integration — Product data representation and exchange — Part 1062: Application module: Contract,Systèmes d'autom
• ISO/TS 10303-1062:201056266,TS,,ISO/TS 10303-1062:2010,Industrial automation systems and integration — Product data representation and exchange — Part 1062: Application module: Contract,Systèmes d'autom
• ISO/TS 10303-1063:200539952,TS,,ISO/TS 10303-1063:2005,Industrial automation systems and integration — Product data representation and exchange — Part 1063: Application module: Product occurrence,Systèm
• ISO/TS 10303-1063:200644828,TS,,ISO/TS 10303-1063:2006,Industrial automation systems and integration — Product data representation and exchange — Part 1063: Application module: Product occurrence,Systèm
• ISO/TS 10303-1063:201464327,TS,,ISO/TS 10303-1063:2014,Industrial automation systems and integration — Product data representation and exchange — Part 1063: Application module: Product occurrence,Systèm
• ISO/TS 10303-1063:201876164,TS,,ISO/TS 10303-1063:2018,Industrial automation systems and integration — Product data representation and exchange — Part 1063: Application module: Product occurrence,Systèm
• ISO/TS 10303-1064:200437935,TS,,ISO/TS 10303-1064:2004,Industrial automation systems and integration — Product data representation and exchange — Part 1064: Application module: Event,Systèmes d'automati
• ISO/TS 10303-1068:200437954,TS,,ISO/TS 10303-1068:2004,Industrial automation systems and integration — Product data representation and exchange — Part 1068: Application module: Constructive solid geomet
• ISO/TS 10303-1068:201056935,TS,,ISO/TS 10303-1068:2010,Industrial automation systems and integration — Product data representation and exchange — Part 1068: Application module: Constructive solid geomet
• ISO/TS 10303-1068:201464328,TS,,ISO/TS 10303-1068:2014,Industrial automation systems and integration — Product data representation and exchange — Part 1068: Application module: Constructive solid geomet
• ISO/TS 10303-1070:200438460,TS,,ISO/TS 10303-1070:2004,Industrial automation systems and integration — Product data representation and exchange — Part 1070: Application module: Class,Systèmes d'automati
• ISO/TS 10303-1091:200539456,TS,,ISO/TS 10303-1091:2005,Industrial automation systems and integration — Product data representation and exchange — Part 1091: Application module: Maths space,Systèmes d'au
• ISO/TS 10303-1092:200539455,TS,,ISO/TS 10303-1092:2005,Industrial automation systems and integration — Product data representation and exchange — Part 1092: Application module: Maths value,Systèmes d'au
• ISO/TS 10303-1103:200539951,TS,,ISO/TS 10303-1103:2005,Industrial automation systems and integration — Product data representation and exchange — Part 1103: Application module: Product class,Systèmes d'
• ISO/TS 10303-1103:200852556,TS,,ISO/TS 10303-1103:2008,Industrial automation systems and integration — Product data representation and exchange — Part 1103: Application module: Product class,Systèmes d'
• ISO/TS 10303-1103:201056393,TS,,ISO/TS 10303-1103:2010,Industrial automation systems and integration — Product data representation and exchange — Part 1103: Application module: Product class,Systèmes d'

← records 22,401–22,800 · All of Withdrawn and superseded ISO standards · records 23,201 on →