Records 10,801–11,200 — Withdrawn and superseded ISO standards

Records 10,801 to 11,200 of 24,640. Each links to its own page, which carries the source URL and the quoted line that states the value.

• ISO 8835-5:200435203,IS,,ISO 8835-5:2004,Inhalational anaesthesia systems — Part 5: Anaesthetic ventilators,Systèmes d'anesthésie par inhalation — Partie 5: Ventilateurs d'anesthésie,2004-05-12,1
• ISO 8836:198816314,IS,,ISO 8836:1988,Suction catheters for use in respiratory tract,Sondes d'aspiration pour les voies respiratoires,1988-12-15,1,['11.040.10'],ISO/TC 121/SC 2,9599,,[23578],"['
• ISO 8836:199723578,IS,,ISO 8836:1997,Suction catheters for use in the respiratory tract,Sondes d'aspiration pour les voies respiratoires,1997-11-06,2,['11.040.10'],ISO/TC 121/SC 2,9599,[16314],
• ISO 8836:200743013,IS,,ISO 8836:2007,Suction catheters for use in the respiratory tract,Sondes d'aspiration pour les voies respiratoires,2007-08-29,3,"['11.040.10','11.040.25']",ISO/TC 121/SC 2
• ISO 8836:201459236,IS,,ISO 8836:2014,Suction catheters for use in the respiratory tract,Sondes d'aspiration pour les voies respiratoires,2014-10-15,4,"['11.040.10','11.040.25']",ISO/TC 121/SC 2
• ISO 8839:198616316,IS,,ISO 8839:1986,"Mechanical properties of fasteners — Bolts, screws, studs and nuts made of non-ferrous metals","Caractéristiques mécaniques des éléments de fixation — Vis,
• ISO 8840:198716317,IS,,ISO 8840:1987,Refractory materials — Determination of bulk density of granular materials (grain density),Matériaux réfractaires — Détermination de la masse volumique appa
• ISO 8843:199116320,IS,,ISO 8843:1991,Aircraft — Crimp-removable contacts for electrical connectors — Identification system,Aéronefs — Contacts à sertir amovibles pour connecteurs électriques —
• ISO 8846:199016323,IS,,ISO 8846:1990,Small craft — Electrical devices — Protection against ignition of surrounding flammable gases,Navires de plaisance — Équipements électriques — Protection co
• ISO 8847:198716324,IS,,ISO 8847:1987,Small craft — Steering gear — Wire rope and pulley systems,Navires de plaisance — Appareils à gouverner — Systèmes à drosses et réas,1987-10-15,1,['47.080']
• ISO 8847:200438439,IS,,ISO 8847:2004,Small craft — Steering gear — Cable and pulley systems,Petits navires — Appareils à gouverner — Systèmes à drosses et réas,2004-04-30,2,['47.080'],ISO/TC 1
• ISO 8848:199016325,IS,,ISO 8848:1990,Small craft — Remote steering systems,Navires de plaisance — Appareils à gouverner commandés à distance,1990-12-20,1,['47.080'],ISO/TC 188,9599,,"[75540,754
• ISO 8848:202075540,IS,,ISO 8848:2020,Small craft — Remote mechanical steering systems,Petits navires — Appareils à gouverner commandés à distance,2020-12-14,2,['47.080'],ISO/TC 188,9599,"[16325
• ISO 8849:199016326,IS,,ISO 8849:1990,Small craft — Electrically operated bilge-pumps,Navires de plaisance — Pompes de cale à moteur électrique,1990-12-13,1,['47.080'],ISO/TC 188,9599,,[34174],"
• ISO 8849:200334174,IS,,ISO 8849:2003,Small craft — Electrically operated direct-current bilge pumps,Petits navires — Pompes de cale à moteur électrique en courant continu,2003-10-14,2,['47.080'
• ISO 8854:198816331,IS,,ISO 8854:1988,Road vehicles — Alternators with regulators — Test methods and general requirements,Véhicules routiers — Alternateurs avec régulateur — Méthodes d'essai et
• ISO 8855:199116332,IS,,ISO 8855:1991,Road vehicles — Vehicle dynamics and road-holding ability — Vocabulary,Véhicules routiers — Dynamique des véhicules et tenue de route — Vocabulaire,1991-12-
• ISO 8855:1991/Add 1:199216333,IS,Add,ISO 8855:1991/Add 1:1992,Road vehicles — Vehicle dynamics and road-holding ability — Vocabulary — Addendum 1: Russian language version,Véhicules routiers — Dynamique d
• ISO 8856:198816334,IS,,ISO 8856:1988,Road vehicles — Starter motors — Test methods and general requirements,Véhicules routiers — Démarreurs — Méthodes d'essai et conditions générales,1988-01-21
• ISO 8856:199516335,IS,,ISO 8856:1995,Road vehicles — Electrical performance of starter motors — Test methods and general requirements,Véhicules routiers — Caractéristiques électriques des démar
• ISO 8856:1995/Amd 1:199728431,IS,Amd,ISO 8856:1995/Amd 1:1997,Road vehicles — Electrical performance of starter motors — Test methods and general requirements — Amendment 1,Véhicules routiers — Caractéris
• ISO 8858-1:199016337,IS,,ISO 8858-1:1990,Hard coal — Froth flotation testing — Part 1: Laboratory procedure,Houille — Essais de flottation — Partie 1: Méthode de laboratoire,1990-08-30,1,['73.040
• ISO 8858-1:1990/Cor 1:200134889,IS,Cor,ISO 8858-1:1990/Cor 1:2001,Hard coal — Froth flotation testing — Part 1: Laboratory procedure — Technical Corrigendum 1,Houille — Essais de flottation — Partie 1: Méth
• ISO 8858-2:200434310,IS,,ISO 8858-2:2004,Hard coal — Froth flotation testing — Part 2: Sequential evaluation,Houille — Essais de flottation — Partie 2: Évaluation séquentielle,2004-08-05,1,['73.0
• ISO 8858-3:200434311,IS,,ISO 8858-3:2004,Hard coal — Froth flotation testing — Part 3: Release evaluation,Houille — Essais de flottation — Partie 3: Évaluation des émissions,2004-08-09,1,['73.040
• ISO 8859-1:198716338,IS,,ISO 8859-1:1987,Information processing — 8-bit single-byte coded graphic character sets — Part 1: Latin alphabet No. 1,Traitement de l'information — Jeux de caractères gr
• ISO 8859-2:198716339,IS,,ISO 8859-2:1987,Information processing — 8-bit single byte coded graphic character sets — Part 2: Latin alphabet No. 2,Traitement de l'information — Jeux de caractères gr
• ISO 8859-3:198816340,IS,,ISO 8859-3:1988,Information processing — 8-bit single-byte coded graphic character sets — Part 3: Latin alphabet No. 3,Traitement de l'information — Jeux de caractères gr
• ISO 8859-4:198816341,IS,,ISO 8859-4:1988,Information processing — 8-bit single-byte coded graphic character sets — Part 4: Latin alphabet No. 4,Traitement de l'information — Jeux de caractères gr
• ISO 8859-6:198716343,IS,,ISO 8859-6:1987,Information processing — 8-Bit single-byte coded graphic character sets — Part 6: Latin/Arabic alphabet,Traitement de l'information — Jeux de caractères g
• ISO 8859-7:198716344,IS,,ISO 8859-7:1987,Information processing — 8-bit single-byte coded graphic character sets — Part 7: Latin/Greek alphabet,Traitement de l'information — Jeux de caractères gr
• ISO 8859-8:198816345,IS,,ISO 8859-8:1988,Information processing — 8-bit single-byte coded graphic character sets — Part 8: Latin/Hebrew alphabet,Traitement de l'information — Jeux de caractères g
• ISO 8861:198816352,IS,,ISO 8861:1988,Shipbuilding — Engine-room ventilation in diesel-engined ships — Design requirements and basis of calculations,Construction navale — Ventilation du comparti
• ISO 8862:198716353,IS,,ISO 8862:1987,Air-conditioning and ventilation of machinery control-rooms on board ships — Design conditions and basis of calculations,Conditionnement d'air et ventilatio
• ISO 8863:198716354,IS,,ISO 8863:1987,Ship's wheelhouse windows — Heating by hot air of glass panes,Fenêtres de la timonerie des navires — Chauffage à l'air chaud des vitrages,1987-03-19,1,['47.
• ISO 8864:198716355,IS,,ISO 8864:1987,Air-conditioning and ventilation of wheelhouse on board ships — Design conditions and basis of calculations,Conditionnement d'air et ventilation de la timon
• ISO 8871-2:200328945,IS,,ISO 8871-2:2003,Elastomeric parts for parenterals and for devices for pharmaceutical use — Part 2: Identification and characterization,Éléments en élastomère pour adminis
• ISO 8871-2:2003/Amd 1:200539803,IS,Amd,ISO 8871-2:2003/Amd 1:2005,Elastomeric parts for parenterals and for devices for pharmaceutical use — Part 2: Identification and characterization — Amendment 1,Élément
• ISO 8871-5:200538107,IS,,ISO 8871-5:2005,Elastomeric parts for parenterals and for devices for pharmaceutical use — Part 5: Functional requirements and testing,Éléments en élastomère pour adminis
• ISO 8871-5:201668560,IS,,ISO 8871-5:2016,Elastomeric parts for parenterals and for devices for pharmaceutical use — Part 5: Functional requirements and testing,Éléments en élastomère pour adminis
• ISO 8871:198816366,IS,,ISO 8871:1988,Elastomeric parts for aqueous parenteral preparations,Éléments en élastomère pour préparations aqueuses parentérales,1988-11-10,1,['11.040.20'],ISO/TC 76,95
• ISO 8871:199016367,IS,,ISO 8871:1990,Elastomeric parts for aqueous parenteral preparations,Éléments en élastomère pour préparations aqueuses parentérales,1990-08-23,2,['11.040.20'],ISO/TC 76,95
• ISO 8871:1990/Amd 1:199523039,IS,Amd,ISO 8871:1990/Amd 1:1995,Elastomeric parts for aqueous parenteral preparations — Amendment 1,Éléments en élastomère pour préparations aqueuses parentérales — Amendemen
• ISO 8872:198816368,IS,,ISO 8872:1988,"Aluminium caps for transfusion, infusion and injection bottles — General requirements and test methods","Capsules en aluminium pour flacons de transfusion,
• ISO 8872:200335060,IS,,ISO 8872:2003,"Aluminium caps for transfusion, infusion and injection bottles — General requirements and test methods","Capsules en aluminium pour flacons de transfusion,
• ISO 8873-3:200739407,IS,,ISO 8873-3:2007,Rigid cellular plastics — Spray-applied polyurethane foam for thermal insulation — Part 3: Test methods,Plastiques alvéolaires rigides — Mousse de polyuré
• ISO 8873:198716369,IS,,ISO 8873:1987,"Cellular plastics, rigid — Spray-applied polyurethane foam for thermal insulation of buildings — Specification",Plastiques alvéolaires rigides — Mousse de
• ISO 8875:198816371,IS,,ISO 8875:1988,Fluorspar — Determination of moisture content of a lot,Spaths fluor — Détermination de l'humidité d'un lot,1988-12-01,1,['73.080'],ISO/TC 175,9599,,[16372],
• ISO 8877:198716375,IS,,ISO 8877:1987,Information processing systems — Interface connector and contact assignments for ISDN basic access interface located at reference points S and T,Systèmes de
• ISO 8877:1987/Amd 1:199116376,IS,Amd,ISO 8877:1987/Amd 1:1991,Information processing systems — Interface connector and contact assignments for ISDN basic access interface located at reference points S and
• ISO 8878:198716377,IS,,ISO 8878:1987,Information processing systems — Data communications — Use of X.25 to provide the OSI connection-mode network service,Systèmes de traitement de l'informatio
• ISO 8878:1987/Add 2:199016379,IS,Add,ISO 8878:1987/Add 2:1990,Information processing systems — Data communications — Use of X.25 to provide the OSI connection-mode network service — Addendum 2,Systèmes de
• ISO 8878:1987/Amd 3:199116380,IS,Amd,ISO 8878:1987/Amd 3:1991,Information processing systems — Data communications — Use of X.25 to provide the OSI connection-mode network service — Amendment 3,Systèmes d
• ISO 8878:1987/Cor 1:199016381,IS,Cor,ISO 8878:1987/Cor 1:1990,Information processing systems — Data communications — Use of X.25 to provide the OSI connection-mode network service — Technical Corrigendum
• ISO 8878:1987/Cor 1:199116386,IS,Cor,ISO 8878:1987/Cor 1:1991,Information processing systems — Data communications — Use of X.25 to provide the OSI connection-mode network service — Technical Corrigendum
• ISO 8878:1987/Cor 2:199016382,IS,Cor,ISO 8878:1987/Cor 2:1990,Information processing systems — Data communications — Use of X.25 to provide the OSI connection-mode network service — Technical Corrigendum
• ISO 8878:1987/Cor 3:199016383,IS,Cor,ISO 8878:1987/Cor 3:1990,Information processing systems — Data communications — Use of X.25 to provide the OSI connection-mode network service — Technical Corrigendum
• ISO 8878:1987/Cor 4:199116384,IS,Cor,ISO 8878:1987/Cor 4:1991,Information processing systems — Data communications — Use of X.25 to provide the OSI connection-mode network service — Technical Corrigendum
• ISO 8884:198916403,IS,,ISO 8884:1989,Information processing — Text and office systems — Keyboards for multiple Latin-alphabet languages — Layout and operation,Traitement de l'information — Syst
• ISO 8885:198716404,IS,,ISO 8885:1987,Information processing systems — Data communication — High-level data link control procedures — General purpose XID frame information field content and form
• ISO 8891:199016417,IS,,ISO 8891:1990,Dental casting alloys with noble metal content of 25 % up to but not including 75 %,Alliages dentaires à couler avec une teneur en métaux précieux comprise
• ISO 8891:199320962,IS,,ISO 8891:1993,Dental casting alloys with noble metal content of 25 % up to but not including 75 %,Alliages dentaires à couler avec une teneur en métaux précieux comprise
• ISO 8891:199824817,IS,,ISO 8891:1998,Dental casting alloys with noble metal content of at least 25 % but less than 75 %,Alliages dentaires à couler avec une teneur en métaux précieux supérieure
• ISO 8893:198916419,IS,,ISO 8893:1989,Forestry machinery — Portable brush-saws — Engine performance and fuel consumption,Machines forestières — Débroussailleuses portatives — Puissance et consom
• ISO 8893:199725974,IS,,ISO 8893:1997,Forestry machinery — Portable brush-cutters and grass-trimmers — Engine performance and fuel consumption,Machines forestières — Débroussailleuses et coupe-h
• ISO 8893:202179636,IS,,ISO 8893:2021,Forestry machinery — Portable brush-cutters and grass-trimmers — Engine performance and fuel consumption,Machines forestières — Débroussailleuses et coupe-h
• ISO 8894-1:198716420,IS,,ISO 8894-1:1987,Refractory materials — Determination of thermal conductivity — Part 1: Hot-wire method (cross-array),Matériaux réfractaires — Détermination de la conducti
• ISO 8894-2:199016421,IS,,ISO 8894-2:1990,Refractory materials — Determination of thermal conductivity — Part 2: Hot-wire method (parallel),Matériaux réfractaires — Détermination de la conductivit
• ISO 8895:198616422,IS,,ISO 8895:1986,Shaped insulating refractory products — Determination of cold crushing strength,Produits réfractaires isolants façonnés — Détermination de la résistance à l
• ISO 8896:198716423,IS,,ISO 8896:1987,Oil of caraway (Carum carvi Linnaeus),Huile essentielle de carvi (Carum carvi Linnaeus),1987-06-18,1,['71.100.60'],ISO/TC 54,9599,,"[66253,53438]","['en','f
• ISO 8897:199116424,IS,,ISO 8897:1991,Oil of juniper berry (Juniperus communis Linnaeus),Huile essentielle de baies de genévrier (Juniperus communis Linnaeus),1991-10-17,1,['71.100.60'],ISO/TC 5
• ISO 8899:199116426,IS,,ISO 8899:1991,Oil of lemon petitgrain [Citrus limon (Linnaeus) N.L.Burman],Huile essentielle de petitgrain citronnier [Citrus limon (Linnaeus) N.L.Burman],1991-06-20,1,['
• ISO 8900:198716427,IS,,ISO 8900:1987,Oil of bergamot petitgrain (Citrus aurantium (Linnaeus) ssp. bergamia (Wight et Arnott) Engler),Huile essentielle de petitgrain bergamotier (Citrus aurantiu
• ISO 8901:198716428,IS,,ISO 8901:1987,Oil of bitter orange petitgrain (Citrus aurantium Linnaeus ssp. aurantium),Huile essentielle de petitgrain bigaradier (Citrus aurantium Linnaeus ssp. aurant
• ISO 8902:198716429,IS,,ISO 8902:1987,Oil of lavandin grosso (Lavandula angustifolia P. Miller x Lavandula latifolia (Linnaeus f.) Medikus),Huile essentielle de lavandin grosso (Lavandula angust
• ISO 8902:199924651,IS,,ISO 8902:1999,"Oil of lavandin Grosso (Lavandula angustifolia Miller x Lavandula latifolia (L.f.) Medikus), French type","Huile essentielle de lavandin Grosso (Lavandula
• ISO 8902:200945332,IS,,ISO 8902:2009,"Oil of lavandin Grosso (Lavandula angustifolia Mill. x Lavandula latifolia Medik.), French type","Huile essentielle de lavandin Grosso (Lavandula angustifo
• ISO 8903:199416430,IS,,ISO 8903:1994,Broadleaved sawn timber — Nominal sizes,Sciages de bois feuillus — Dimensions nominales,1994-10-20,1,['79.040'],ISO/TC 218,9599,,[62871],"['en','fr']",1
• ISO 8905:198816432,IS,,ISO 8905:1988,Sawn timber — Test methods — Determination of ultimate strength in shearing parallel to grain,Bois sciés — Méthodes d'essai — Détermination de la contrainte
• ISO 8909-1:199416436,IS,,ISO 8909-1:1994,Forage harvesters — Part 1: Vocabulary,Récolteuses-hacheuses-chargeuses de fourrage — Partie 1: Vocabulaire,1994-03-03,1,"['01.040.65','65.060.50']",ISO/T
• ISO 8909-2:199422380,IS,,ISO 8909-2:1994,Forage harvesters — Part 2: Specification of characteristics and performance,Récolteuses-hacheuses-chargeuses de fourrage — Partie 2: Spécification des ca
• ISO 8909-3:199416437,IS,,ISO 8909-3:1994,Forage harvesters — Part 3: Test methods,Récolteuses-hacheuses-chargeuses de fourrage — Partie 3: Méthodes d'essai,1994-03-03,1,['65.060.50'],ISO/TC 23/SC
• ISO 8910:198716438,IS,,ISO 8910:1987,Machinery and equipment for working the soil — Mouldboard ploughs — Working elements — Vocabulary,Matériel de travail du sol — Charrues à socs — Pièces trav
• ISO 8913:198916441,IS,,ISO 8913:1989,"Aerospace — Lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 204 degrees C/21 000 kPa — Procurement specification","Aéronautique
• ISO 8913:1989/Cor 1:199016443,IS,Cor,ISO 8913:1989/Cor 1:1990,"Aerospace — Lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 204 degrees C/21 000 kPa — Procurement specification —
• ISO 8913:199416442,IS,,ISO 8913:1994,"Aerospace — Lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 204 degrees C/21 000 kPa — Procurement specification","Aéronautique
• ISO 8930:198716459,IS,,ISO 8930:1987,General principles on reliability for structures — List of equivalent terms,Principes généraux de la fiabilité des constructions — Liste de termes équivalen
• ISO 8936:198816461,IS,,ISO 8936:1988,Caravan awnings — Safety requirements,Auvents de caravane — Exigences de sécurité,1988-08-18,1,"['97.200.30','43.100']",ISO/TC 83,9599,,[34790],"['en','fr']
• ISO 8936:200334790,IS,,ISO 8936:2003,Caravan awnings — Safety requirements,Auvents de caravane — Exigences de sécurité,2003-01-30,2,"['97.200.30','43.100']",ISO/TC 83,9599,[16461],[39981],"['en
• ISO 8936:200739981,IS,,ISO 8936:2007,Awnings for leisure accommodation vehicles — Requirements and test methods,Auvents pour véhicules de loisirs habitables — Exigences et méthodes d'essai,2007
• ISO 8937:199116462,IS,,ISO 8937:1991,Caravan awnings — Functional requirements and test methods,Auvents de caravane — Exigences de fonctionnement et méthodes d'essai,1991-10-31,1,"['97.200.30',
• ISO 8937:200029737,IS,,ISO 8937:2000,Caravan awnings — Functional requirements and test methods,Auvents de caravane — Exigences de fonctionnement et méthodes d'essai,2000-02-10,2,"['97.200.30',
• ISO 8940:198816464,IS,,ISO 8940:1988,"Aerospace — Nuts, anchor, self-locking, sealing, floating, two-lug, with counterbore, classifications 900 MPa/120 degrees C, 900 MPa/175 degrees C and 900
• ISO 8943:199116467,IS,,ISO 8943:1991,Refrigerated light hydrocarbon fluids — Sampling of liquefied natural gas — Continuous method,Hydrocarbures liquides légers réfrigérés — Échantillonnage de
• ISO 8943:200741508,IS,,ISO 8943:2007,Refrigerated light hydrocarbon fluids — Sampling of liquefied natural gas — Continuous and intermittent methods,Hydrocarbures liquides légers réfrigérés — É
• ISO 8960:199116484,IS,,ISO 8960:1991,"Refrigerators, frozen-food storage cabinets and food freezers for household and similar use — Measurement of emission of airborne acoustical noise","Réfrig
• ISO 8962:198716485,IS,,ISO 8962:1987,Plastics — Polymer dispersions — Determination of density,Plastiques — Dispersions de polymères — Détermination de la masse volumique,1987-10-08,1,['83.080.
• ISO 8965:198716488,IS,,ISO 8965:1987,Logging industry — Technology — Terms and definitions,Exploitation forestière — Techniques — Termes et définitions,1987-11-05,1,"['79.020','01.040.79']",ISO
• ISO 8965:201352488,IS,,ISO 8965:2013,Logging industry — Technology — Terms and definitions,Exploitation forestière — Techniques — Termes et définitions,2013-10-15,2,"['79.020','01.040.79']",ISO
• ISO 8966:198716489,IS,,ISO 8966:1987,Logging industry — Products — Terms and definitions,Exploitation forestière — Produits — Termes et définitions,1987-10-29,1,"['79.020','01.040.79']",ISO/TC
• ISO 8967:199216490,IS,,ISO 8967:1992,Dried milk and dried milk products — Determination of bulk density,Lait sec et produits laitiers en poudre — Détermination de la masse volumique,1992-01-23,
• ISO 8968-1:200135120,IS,,ISO 8968-1:2001,Milk — Determination of nitrogen content — Part 1: Kjeldahl method,Lait — Détermination de la teneur en azote — Partie 1: Méthode Kjeldahl,2001-12-20,1,['
• ISO 8968-2:200135121,IS,,ISO 8968-2:2001,Milk — Determination of nitrogen content — Part 2: Block-digestion method (Macro method),Lait — Détermination de la teneur en azote — Partie 2: Méthode de
• ISO 8968-4:200135122,IS,,ISO 8968-4:2001,Milk — Determination of nitrogen content — Part 4: Determination of non-protein-nitrogen content,Lait — Détermination de la teneur en azote — Partie 4: Dé
• ISO 8968-4:2001/Cor 1:201160537,IS,Cor,ISO 8968-4:2001/Cor 1:2011,Milk — Determination of nitrogen content — Part 4: Determination of non-protein-nitrogen content — Technical Corrigendum 1,Lait — Déterminat
• ISO 8968-5:200135123,IS,,ISO 8968-5:2001,Milk — Determination of nitrogen content — Part 5: Determination of protein-nitrogen content,Lait — Détermination de la teneur en azote — Partie 5: Déterm
• ISO 8969:199016492,IS,,ISO 8969:1990,Timber structures — Testing of unilateral punched metal plate fasterners and joints,Structures en bois — Essai des connecteurs métalliques de fixation à den
• ISO 8970:198916493,IS,,ISO 8970:1989,Timber structures — Testing of joints made with mechanical fasteners — Requirements for wood density,Structures en bois — Essai des assemblages réalisés par
• ISO 8970:201050689,IS,,ISO 8970:2010,Timber structures — Testing of joints made with mechanical fasteners — Requirements for wood density,Structures en bois — Essai des assemblages réalisés par
• ISO 8974:198816497,IS,,ISO 8974:1988,Plastics — Phenolic resins — Determination of residual phenol content by gas chromatography,Plastiques — Résines phénoliques — Dosage du phénol résiduel par
• ISO 8974:199724124,IS,,ISO 8974:1997,Plastics — Phenolic resins — Determination of residual phenol content by gas chromatography,Plastiques — Résines phénoliques — Dosage du phénol résiduel par
• ISO 8976:198816499,IS,,ISO 8976:1988,Pliers and nippers — Multiple slip joint pliers — Dimensions and test values,Pinces et tenailles — Pinces multiprises — Dimensions et valeurs d'essai,1988-0
• ISO 8976:200433645,IS,,ISO 8976:2004,Pliers and nippers — Multiple slip joint pliers — Dimensions and test values,Pinces et tenailles — Pinces multiprises — Dimensions et valeurs d'essai,2004-0
• ISO 8977:198716500,IS,,ISO 8977:1987,Tools for pressing — Round matrixes,Outillage de presse — Matrices rondes,1987-10-08,1,['25.120.10'],ISO/TC 29/SC 8,9599,,[30348],"['en','fr']",2
• ISO 8978:198716501,IS,,ISO 8978:1987,Tools for pressing — Guides for round punches,Outillage de presse —Guides pour poinçons ronds,1987-10-01,1,['25.120.10'],ISO/TC 29/SC 8,9599,,[30349],"['en'
• ISO 8979:198816502,IS,,ISO 8979:1988,Pliers and nippers for electronics — Nomenclature,Pinces pour l'électronique — Nomenclature,1988-10-20,1,"['25.140.30','01.040.25']",ISO/TC 29/SC 10,9599,,[
• ISO 8980-1:199216503,IS,,ISO 8980-1:1992,Ophthalmic optics — Finished single-vision corrective lenses — Part 1: General requirements,Optique ophtalmique — Verres correcteurs unifocaux finis — Par
• ISO 8980-1:199622504,IS,,ISO 8980-1:1996,Ophthalmic optics — Uncut finished spectacle lenses — Part 1: Specifications for single-vision and multifocal lenses,Optique ophtalmique — Verres de lunet
• ISO 8980-1:200434274,IS,,ISO 8980-1:2004,Ophthalmic optics — Uncut finished spectacle lenses — Part 1: Specifications for single-vision and multifocal lenses,Optique ophtalmique — Verres de lunet
• ISO 8980-1:2004/Cor 1:200644516,IS,Cor,ISO 8980-1:2004/Cor 1:2006,Ophthalmic optics — Uncut finished spectacle lenses — Part 1: Specifications for single-vision and multifocal lenses — Technical Corrigendum
• ISO 8980-2:199622505,IS,,ISO 8980-2:1996,Ophthalmic optics — Uncut finished spectacle lenses — Part 2: Specifications for progressive power lenses,Optique ophtalmique — Verres de lunettes finis n
• ISO 8980-2:200434275,IS,,ISO 8980-2:2004,Ophthalmic optics — Uncut finished spectacle lenses — Part 2: Specifications for progressive power lenses,Optique ophtalmique — Verres de lunettes finis n
• ISO 8980-2:2004/Cor 1:200644517,IS,Cor,ISO 8980-2:2004/Cor 1:2006,Ophthalmic optics — Uncut finished spectacle lenses — Part 2: Specifications for progressive power lenses — Technical Corrigendum 1,Optique
• ISO 8980-3:199916505,IS,,ISO 8980-3:1999,Ophthalmic optics — Uncut finished spectacle lenses — Part 3: Transmittance specifications and test methods,Optique ophtalmique — Verres de lunettes finis
• ISO 8980-3:200335227,IS,,ISO 8980-3:2003,Ophthalmic optics — Uncut finished spectacle lenses — Part 3: Transmittance specifications and test methods,Optique ophtalmique — Verres de lunettes finis
• ISO 8980-3:201351052,IS,,ISO 8980-3:2013,Ophthalmic optics — Uncut finished spectacle lenses — Part 3: Transmittance specifications and test methods,Optique ophtalmique — Verres de lunettes finis
• ISO 8980-4:200027465,IS,,ISO 8980-4:2000,Ophthalmic optics — Uncut finished spectacle lenses — Part 4: Specifications and test methods for anti-reflective coatings,Optique ophtalmique — Verres de
• ISO 8980-4:200640122,IS,,ISO 8980-4:2006,Ophthalmic optics — Uncut finished spectacle lenses — Part 4: Specifications and test methods for anti-reflective coatings,Optique ophtalmique — Verres de
• ISO 8984-1:198716510,IS,,ISO 8984-1:1987,Road vehicles — Testing of fuel injectors for compression-ignition engines — Part 1: Hand-lever-operated testing and setting apparatus,Véhicules routiers
• ISO 8984-2:198716512,IS,,ISO 8984-2:1987,Road vehicles — Testing of fuel injectors for compression-ignition engines — Part 2: Test procedures,Véhicules routiers — Essais des injecteurs de combust
• ISO 8985:198916514,IS,,ISO 8985:1989,Plastics — Ethylene/vinyl acetate copolymer (E/VAC) thermoplastics — Determination of vinyl acetate content,Plastiques — Copolymères éthylène/acétate de vin
• ISO 8985:199826813,IS,,ISO 8985:1998,Plastics — Ethylene/vinyl acetate copolymer (EVAC) thermoplastics — Determination of vinyl acetate content,Plastiques — Copolymères éthylène/acétate de viny
• ISO 8986-1:199316515,IS,,ISO 8986-1:1993,Plastics — Polybutene (PB) moulding and extrusion materials — Part 1: Designation system and basis for specifications,Plastiques — Matériaux à base de pol
• ISO 8986-1:200945084,IS,,ISO 8986-1:2009,Plastics — Polybutene-1 (PB-1) moulding and extrusion materials — Part 1: Designation system and basis for specifications,Plastiques — Matériaux à base de
• ISO 8986-2:199521109,IS,,ISO 8986-2:1995,Plastics — Polybutene (PB) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties,Plastiques — Polybutèn
• ISO 8986-2:1995/Amd 1:200031648,IS,Amd,ISO 8986-2:1995/Amd 1:2000,Plastics — Polybutene (PB) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties — Amendm
• ISO 8986-2:200945085,IS,,ISO 8986-2:2009,Plastics — Polybutene-1 (PB-1) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties,Plastiques — Matér
• ISO 8987:198816516,IS,,ISO 8987:1988,Plastics — Phenolic resins — Determination of reactivity on a B-transformation test plate,Plastiques — Résines phénoliques — Méthode d'évaluation de la réac
• ISO 8987:199524004,IS,,ISO 8987:1995,Plastics — Phenolic resins — Determination of reactivity on a B-transformation test plate,Plastiques — Résines phénoliques — Méthode d'évaluation de la réac
• ISO 8988:198916517,IS,,ISO 8988:1989,Plastics — Phenolic resins — Determination of hexamethylenetetramine content,Plastiques — Résines phénoliques — Dosage de l'hexaméthylènetétramine,1989-03-0
• ISO 8988:199525124,IS,,ISO 8988:1995,Plastics — Phenolic resins — Determination of hexamethylenetetramine content — Kjeldahl method and perchloric acid method,Plastiques — Résines phénoliques —
• ISO 8989:198816518,IS,,ISO 8989:1988,Plastics — Liquid phenolic resins — Determination of water miscibility,Plastiques — Résines phénoliques liquides — Détermination de la tolérance à l'eau,198
• ISO 8992:198616521,IS,,ISO 8992:1986,"Fasteners — General requirements for bolts, screws, studs and nuts","Éléments de fixation — Prescriptions générales relatives aux vis, goujons et écrous",1
• ISO 8993:198916522,IS,,ISO 8993:1989,Anodized aluminium and aluminium alloys — Rating system for the evaluation of pitting corrosion — Chart method,Aluminium et alliages d'aluminium anodisés —
• ISO 8993:201051498,IS,,ISO 8993:2010,Anodizing of aluminium and its alloys — Rating system for the evaluation of pitting corrosion — Chart method,Anodisation de l'aluminium et de ses alliages —
• ISO 8994:198916523,IS,,ISO 8994:1989,Anodized aluminium and aluminium alloys — Rating system for the evaluation of pitting corrosion — Grid method,Aluminium et alliages d'aluminium anodisés — S
• ISO 8994:201151497,IS,,ISO 8994:2011,Anodizing of aluminium and its alloys — Rating system for the evaluation of pitting corrosion — Grid method,Anodisation de l'aluminium et de ses alliages —
• ISO 8995-1:200228857,IS,,ISO 8995-1:2002,Lighting of work places — Part 1: Indoor,Éclairage des lieux de travail — Partie 1: Intérieur,2002-06-13,1,"['13.180','91.160.10']",ISO/TC 274,9599,[16524
• ISO 8995-1:2002/Cor 1:200543196,IS,Cor,ISO 8995-1:2002/Cor 1:2005,Lighting of work places — Part 1: Indoor — Technical Corrigendum 1,Éclairage des lieux de travail — Partie 1: Intérieur — Rectificatif techn
• ISO 8995-3:200644630,IS,,ISO 8995-3:2006,Lighting of work places — Part 3: Lighting requirements for safety and security of outdoor work places,Éclairage des lieux de travail — Partie 3: Exigence
• ISO 8995:198916524,IS,,ISO 8995:1989,Principles of visual ergonomics — The lighting of indoor work systems,Principes d'ergonomie visuelle — L'éclairage des systèmes de travail intérieurs,1989-0
• ISO 8996:199016525,IS,,ISO 8996:1990,Ergonomics — Determination of metabolic heat production,Ergonomie — Détermination de la production de chaleur métabolique,1990-12-20,1,['13.180'],ISO/TC 159
• ISO 8996:200434251,IS,,ISO 8996:2004,Ergonomics of the thermal environment — Determination of metabolic rate,Ergonomie de l'environnement thermique — Détermination du métabolisme énergétique,20
• ISO 8999:199316528,IS,,ISO 8999:1993,Reciprocating internal combustion engines — Graphical symbols,Moteurs alternatifs à combustion interne — Symboles graphiques,1993-05-20,1,"['27.020','01.080
• ISO 9000-1:199416530,IS,,ISO 9000-1:1994,Quality management and quality assurance standards — Part 1: Guidelines for selection and use,Normes pour le management de la qualité et l'assurance de la
• ISO 9000-2:199316531,IS,,ISO 9000-2:1993,"Quality management and quality assurance standards — Part 2: Generic guidelines for the application of ISO 9001, ISO 9002 and ISO 9003","Normes pour le m
• ISO 9000-3:199116532,IS,,ISO 9000-3:1991,"Quality management and quality assurance standards — Part 3: Guidelines for the application of ISO 9001 to the development, supply and maintenance of sof
• ISO 9000-3:199726364,IS,,ISO 9000-3:1997,"Quality management and quality assurance standards — Part 3: Guidelines for the application of ISO 9001:1994 to the development, supply, installation an
• ISO 9000:198716529,IS,,ISO 9000:1987,Quality management and quality assurance standards — Guidelines for selection and use,Normes pour la gestion de la qualité et l'assurance de la qualité — Li
• ISO 9000:200029280,IS,,ISO 9000:2000,Quality management systems — Fundamentals and vocabulary,Systèmes de management de la qualité — Principes essentiels et vocabulaire,2000-12-08,2,"['03.120.1
• ISO 9000:200542180,IS,,ISO 9000:2005,Quality management systems — Fundamentals and vocabulary,Systèmes de management de la qualité — Principes essentiels et vocabulaire,2005-09-20,3,"['03.120.1
• ISO 9000:201545481,IS,,ISO 9000:2015,Quality management systems — Fundamentals and vocabulary,Systèmes de management de la qualité — Principes essentiels et vocabulaire,2015-09-22,4,"['03.120.1
• ISO 9001:198716533,IS,,ISO 9001:1987,"Quality systems — Model for quality assurance in design/development, production, installation and servicing","Systèmes qualité — Modèle pour l'assurance de
• ISO 9001:199416534,IS,,ISO 9001:1994,"Quality systems — Model for quality assurance in design, development, production, installation and servicing","Systèmes qualité — Modèle pour l'assurance d
• ISO 9001:1994/Cor 1:199525946,IS,Cor,ISO 9001:1994/Cor 1:1995,"Quality systems — Model for quality assurance in design, development, production, installation and servicing — Technical Corrigendum 1","Syst
• ISO 9001:200021823,IS,,ISO 9001:2000,Quality management systems — Requirements,Systèmes de management de la qualité — Exigences,2000-12-08,3,"['03.120.10','03.100.70']",ISO/TC 176/SC 2,9599,"[2
• ISO 9001:200846486,IS,,ISO 9001:2008,Quality management systems — Requirements,Systèmes de management de la qualité — Exigences,2008-11-13,4,"['03.120.10','03.100.70']",ISO/TC 176/SC 2,9599,[21
• ISO 9001:2008/Cor 1:200954538,IS,Cor,ISO 9001:2008/Cor 1:2009,Quality management systems — Requirements — Technical Corrigendum 1,Systèmes de management de la qualité — Exigences — Rectificatif technique
• ISO 9001:201562085,IS,,ISO 9001:2015,Quality management systems — Requirements,Systèmes de management de la qualité — Exigences,2015-09-22,5,"['03.120.10','03.100.70']",ISO/TC 176/SC 2,9599,"[4
• ISO 9001:2015/Amd 1:202488431,IS,Amd,ISO 9001:2015/Amd 1:2024,Quality management systems — Requirements — Amendment 1: Climate action changes,Systèmes de management de la qualité — Exigences — Amendement
• ISO 9002:198716536,IS,,ISO 9002:1987,Quality systems — Model for quality assurance in production and installation,Systèmes qualité — Modèle pour l'assurance de la qualité en production et insta
• ISO 9002:199416537,IS,,ISO 9002:1994,"Quality systems — Model for quality assurance in production, installation and servicing","Systèmes qualité — Modèle pour l'assurance de la qualité en produ
• ISO 9002:1994/Cor 1:199525947,IS,Cor,ISO 9002:1994/Cor 1:1995,"Quality systems — Model for quality assurance in production, installation and servicing — Technical Corrigendum 1","Systèmes qualité — Modèle
• ISO 9003:198716538,IS,,ISO 9003:1987,Quality systems — Model for quality assurance in final inspection and test,Systèmes qualité — Modèle pour l'assurance de la qualité en contrôle et essais fi
• ISO 9003:199416539,IS,,ISO 9003:1994,Quality systems — Model for quality assurance in final inspection and test,Systèmes qualité — Modèle pour l'assurance de la qualité en contrôle et essais fi
• ISO 9003:1994/Cor 1:199424812,IS,Cor,ISO 9003:1994/Cor 1:1994,Quality systems — Model for quality assurance in final inspection and test — Technical Corrigendum 1,Systèmes qualité — Modèle pour l'assuranc
• ISO 9003:1994/Cor 2:199525948,IS,Cor,ISO 9003:1994/Cor 2:1995,Quality systems — Model for quality assurance in final inspection and test — Technical Corrigendum 2,Systèmes qualité — Modèle pour l'assuranc
• ISO 9004-1:199416541,IS,,ISO 9004-1:1994,Quality management and quality system elements — Part 1: Guidelines,Management de la qualité et éléments de système qualité — Partie 1: Lignes directrices
• ISO 9004:198716540,IS,,ISO 9004:1987,Quality management and quality system elements — Guidelines,Gestion de la qualité et éléments de système qualité — Lignes directrices,1987-03-19,1,"['03.120
• ISO 9004:200028692,IS,,ISO 9004:2000,Quality management systems — Guidelines for performance improvements,Systèmes de management de la qualité — Lignes directrices pour l'amélioration des perfo
• ISO 9004:200941014,IS,,ISO 9004:2009,Managing for the sustained success of an organization — A quality management approach,Gestion des performances durables d'un organisme — Approche de managem
• ISO 9005:199416547,IS,,ISO 9005:1994,Uranium dioxide powder and sintered pellets — Determination of oxygen/uranium atomic ratio — Amperometric method,Poudre et pastilles frittées de dioxyde d'u
• ISO 9010:198716552,IS,,ISO 9010:1987,Synchronous belt drives — Automotive belts,Transmissions synchrones par courroies — Courroies pour la construction automobile,1987-12-17,1,['43.060.10'],ISO
• ISO 9010:199721431,IS,,ISO 9010:1997,Synchronous belt drives — Automotive belts,Transmissions synchrones par courroies — Courroies pour la construction automobile,1997-04-10,2,['43.060.10'],ISO
• ISO 9011:198716554,IS,,ISO 9011:1987,Synchronous belt drives — Automotive pulleys,Transmissions synchrones par courroies — Poulies pour la construction automobile,1987-12-17,1,['43.060.10'],ISO
• ISO 9011:199721432,IS,,ISO 9011:1997,Synchronous belt drives — Automotive pulleys,Transmissions synchrones par courroies — Poulies pour la construction automobile,1997-04-10,2,['43.060.10'],ISO
• ISO 9012:198816556,IS,,ISO 9012:1988,Air-aspirated hand blowpipes — Specifications,Chalumeaux manuels aéro-gaz à air aspiré — Spécifications,1988-04-07,1,['25.160.30'],ISO/TC 44/SC 8,9599,,[286
• ISO 9012:199828605,IS,,ISO 9012:1998,Gas welding equipment — Air-aspirated hand blowpipes — Specifications and tests,Équipement de soudage aux gaz — Chalumeaux manuels aéro-gaz à air aspiré — S
• ISO 9012:200840645,IS,,ISO 9012:2008,Gas welding equipment — Air-aspirated hand blowpipes — Specifications and tests,Équipement de soudage aux gaz — Chalumeaux manuels aéro-gaz à air aspiré — S
• ISO 9013:199216557,IS,,ISO 9013:1992,Welding and allied processes — Quality classification and dimensional tolerances of thermally cut (oxygen/fuel gas flame) surfaces,Soudage et techniques con
• ISO 9013:200229998,IS,,ISO 9013:2002,Thermal cutting — Classification of thermal cuts — Geometrical product specification and quality tolerances,Coupage thermique — Classification des coupes th
• ISO 9015-2:200329987,IS,,ISO 9015-2:2003,Destructive tests on welds in metallic materials — Hardness testing — Part 2: Microhardness testing of welded joints,Essais destructifs des soudures sur m
• ISO 9016:200132825,IS,,ISO 9016:2001,"Destructive tests on welds in metallic materials — Impact tests — Test specimen location, notch orientation and examination","Essais destructifs des soudur
• ISO 9016:201262318,IS,,ISO 9016:2012,"Destructive tests on welds in metallic materials — Impact tests — Test specimen location, notch orientation and examination","Essais destructifs des soudur
• ISO 9017:200132826,IS,,ISO 9017:2001,Destructive tests on welds in metallic materials — Fracture test,Essais destructifs des soudures sur matériaux métalliques — Essai de texture,2001-04-12,1,[
• ISO 9018:200332827,IS,,ISO 9018:2003,Destructive tests on welds in metallic materials — Tensile test on cruciform and lapped joints,Essais destructifs des soudures sur matériaux métalliques — E
• ISO 9019:198716563,IS,,ISO 9019:1987,Securities — Numbering of certificates,Valeurs mobilières — Numérotation des titres/certificats,1987-09-10,1,['03.060'],ISO/TC 68,9599,,[22737],"['en','fr']
• ISO 9020:199416564,IS,,ISO 9020:1994,Binders for paints and varnishes — Determination of free-formaldehyde content of amino resins — Sodium sulfite titrimetric method,Liants pour peintures et v
• ISO 9020:1994/Cor 1:199626624,IS,Cor,ISO 9020:1994/Cor 1:1996,Binders for paints and varnishes — Determination of free-formaldehyde content of amino resins — Sodium sulfite titrimetric method — Technical
• ISO 9021:198816565,IS,,ISO 9021:1988,"Motorcycles — Controls — Types, positions and functions","Motocycles — Commandes — Types, positions et fonctions",1988-09-08,1,['43.140'],ISO/TC 22/SC 38,9
• ISO 9022-1:199416566,IS,,ISO 9022-1:1994,"Optics and optical instruments — Environmental test methods — Part 1: Definitions, extent of testing","Optique et instruments d'optique — Méthodes d'essa
• ISO 9022-1:201255767,IS,,ISO 9022-1:2012,"Optics and photonics — Environmental test methods — Part 1: Definitions, extent of testing","Optique et photonique — Méthodes d'essais d'environnement —
• ISO 9022-2:199416567,IS,,ISO 9022-2:1994,"Optics and optical instruments — Environmental test methods — Part 2: Cold, heat, humidity","Optique et instruments d'optique — Méthodes d'essais d'envir
• ISO 9022-2:200234057,IS,,ISO 9022-2:2002,"Optics and optical instruments — Environmental test methods — Part 2: Cold, heat and humidity","Optique et instruments d'optique — Méthodes d'essais d'en
• ISO 9022-3:199416568,IS,,ISO 9022-3:1994,Optics and optical instruments — Environmental test methods — Part 3: Mechanical stress,Optique et instruments d'optique — Méthodes d'essais d'environneme
• ISO 9022-3:199826910,IS,,ISO 9022-3:1998,Optics and optical instruments — Environmental test methods — Part 3: Mechanical stress,Optique et instruments d'optique — Méthodes d'essais d'environneme
• ISO 9022-3:201567342,IS,,ISO 9022-3:2015,Optics and photonics — Environmental test methods — Part 3: Mechanical stress,Optique et photonique — Méthodes d'essais d'environnement — Partie 3: Contra
• ISO 9022-3:2015/Amd 1:202075820,IS,Amd,ISO 9022-3:2015/Amd 1:2020,Optics and photonics — Environmental test methods — Part 3: Mechanical stress — Amendment 1,Optique et photonique — Méthodes d'essais d'envi
• ISO 9022-4:199416569,IS,,ISO 9022-4:1994,Optics and optical instruments — Environmental test methods — Part 4: Salt mist,Optique et instruments d'optique — Méthodes d'essais d'environnement — Par
• ISO 9022-4:200234058,IS,,ISO 9022-4:2002,Optics and optical instruments — Environmental test methods — Part 4: Salt mist,Optique et instruments d'optique — Méthodes d'essais d'environnement — Par
• ISO 9022-5:199416570,IS,,ISO 9022-5:1994,"Optics and optical instruments — Environmental test methods — Part 5: Combined cold, low air pressure",Optique et instruments d'optique — Méthodes d'essa
• ISO 9022-6:199416571,IS,,ISO 9022-6:1994,Optics and optical instruments — Environmental test methods — Part 6: Dust,Optique et instruments d'optique — Méthodes d'essais d'environnement — Partie 6
• ISO 9022-7:199416572,IS,,ISO 9022-7:1994,"Optics and optical instruments — Environmental test methods — Part 7: Drip, rain","Optique et instruments d'optique — Méthodes d'essais d'environnement —
• ISO 9022-7:1994/Cor 1:200133549,IS,Cor,ISO 9022-7:1994/Cor 1:2001,"Optics and optical instruments — Environmental test methods — Part 7: Drip, rain — Technical Corrigendum 1","Optique et instruments d'optiq
• ISO 9022-7:200540749,IS,,ISO 9022-7:2005,Optics and photonics — Environmental test methods — Part 7: Resistance to drip or rain,Optique et photonique — Méthodes d'essais environnementales — Parti
• ISO 9022-8:199416573,IS,,ISO 9022-8:1994,"Optics and optical instruments — Environmental test methods — Part 8: High pressure, low pressure, immersion","Optique et instruments d'optique — Méthode
• ISO 9022-9:199416574,IS,,ISO 9022-9:1994,Optics and optical instruments — Environmental test methods — Part 9: Solar radiation,Optique et instruments d'optique — Méthodes d'essais d'environnement
• ISO 9022-10:199416575,IS,,ISO 9022-10:1994,"Optics and optical instruments — Environmental test methods — Part 10: Combined sinusoidal vibration, dry heat or cold",Optique et instruments d'optique
• ISO 9022-10:199826911,IS,,ISO 9022-10:1998,Optics and optical instruments — Environmental test methods — Part 10: Combined sinusoidal vibration and dry heat or cold,Optique et instruments d'optiqu
• ISO 9022-11:199416576,IS,,ISO 9022-11:1994,Optics and optical instruments — Environmental test methods — Part 11: Mould growth,Optique et instruments d'optique — Méthodes d'essais d'environnement
• ISO 9022-12:199416577,IS,,ISO 9022-12:1994,Optics and optical instruments — Environmental test methods — Part 12: Contamination,Optique et instruments d'optique — Méthodes d'essais d'environnement
• ISO 9022-13:199416578,IS,,ISO 9022-13:1994,"Optics and optical instruments — Environmental test methods — Part 13: Combined shock, bump or free fall, dry heat or cold","Optique et instruments d'op
• ISO 9022-13:199826912,IS,,ISO 9022-13:1998,"Optics and optical instruments — Environmental test methods — Part 13: Combined shock, bump or free fall and dry heat or cold","Optique et instruments d
• ISO 9022-14:199416579,IS,,ISO 9022-14:1994,"Optics and optical instruments — Environmental test methods — Part 14: Dew, hoarfrost, ice","Optiques et instruments d'optique — Méthodes d'essais d'env
• ISO 9022-15:199416580,IS,,ISO 9022-15:1994,"Optics and optical instruments — Environmental test methods — Part 15: Combined random vibration wide band: reproducibility medium, in dry heat or cold"
• ISO 9022-15:199826913,IS,,ISO 9022-15:1998,Optics and optical instruments — Environmental test methods — Part 15: Combined digitally controlled broad-band random vibration and dry heat or cold,Opt
• ISO 9022-16:199416581,IS,,ISO 9022-16:1994,"Optics and optical instruments — Environmental test methods — Part 16: Combined bounce or steady-state acceleration, in dry heat or cold",Optique et ins
• ISO 9022-16:199826914,IS,,ISO 9022-16:1998,Optics and optical instruments — Environmental test methods — Part 16: Combined bounce or steady-state acceleration and dry heat or cold,Optique et instr
• ISO 9022-17:199416582,IS,,ISO 9022-17:1994,"Optics and optical instruments — Environmental test methods — Part 17: Combined contamination, solar radiation",Optique et instruments d'optique — Métho
• ISO 9022-18:199416583,IS,,ISO 9022-18:1994,Optics and optical instruments — Environmental test methods — Part 18: Combined damp heat and low internal pressure,Optique et instruments d'optique — Mé
• ISO 9022-19:199416584,IS,,ISO 9022-19:1994,Optics and optical instruments — Environmental test methods — Part 19: Temperature cycles combined with sinusoidal or random vibration,Optique et instrum
• ISO 9022-20:199722462,IS,,ISO 9022-20:1997,Optics and optical instruments — Environmental test methods — Part 20: Humid atmosphere containing sulfur dioxide or hydrogen sulfide,Optique et instrume
• ISO 9022-21:199826915,IS,,ISO 9022-21:1998,Optics and optical instruments — Environmental test methods — Part 21: Combined low pressure and ambient temperature or dry heat,Optique et instruments d
• ISO 9022-23:201363138,IS,,ISO 9022-23:2013,"Optics and photonics — Environmental test methods — Part 23: Low pressure combined with cold, ambient temperature and dry and damp heat","Optique et pho
• ISO 9022-23:201669939,IS,,ISO 9022-23:2016,"Optics and photonics — Environmental test methods — Part 23: Low pressure combined with cold, ambient temperature and dry or damp heat",Optique et photo
• ISO 9026:199116588,IS,,ISO 9026:1991,Raw rubber or unvulcanized compounds — Determination of green strength,Caoutchouc brut ou mélanges de caoutchoucs non vulcanisés — Détermination de la cohés
• ISO 9026:200745390,IS,,ISO 9026:2007,Raw rubber or unvulcanized compounds — Determination of green strength,Caoutchouc brut ou mélanges de caoutchoucs non vulcanisés — Détermination de la cohés
• ISO 9028:198916589,IS,,ISO 9028:1989,Rubber — Dissolution by acid digestion,Caoutchouc — Dissolution par attaque acide,1989-07-13,1,['83.060'],ISO/TC 45/SC 2,9599,,[43686],"['en','fr']",2
• ISO 9038:200226988,IS,,ISO 9038:2002,Test for sustained combustibility of liquids,Essai de combustion entretenue de liquides,2002-10-24,1,"['13.220.40','87.040']",ISO/TC 35/SC 9,9599,[16599],[5
• ISO 9038:201350182,IS,,ISO 9038:2013,Determination of sustained combustibility of liquids,Détermination de la combustion entretenue des liquides,2013-07-04,2,"['13.220.40','75.080','87.040']",I
• ISO 9038:202177086,IS,,ISO 9038:2021,Determination of sustained combustibility of liquids,Essai de combustion entretenue de liquides,2021-04-23,3,"['13.220.40','75.080','87.040']",ISO/TC 28,959
• ISO 9039:199416600,IS,,ISO 9039:1994,Optics and optical instruments — Quality evaluation of optical systems — Determination of distortion,Optique et instruments d'optique — Évaluation de la qua
• ISO 9039:1994/Cor 1:200440738,IS,Cor,ISO 9039:1994/Cor 1:2004,Optics and optical instruments — Quality evaluation of optical systems — Determination of distortion — Technical Corrigendum 1,Optique et inst
• ISO 9040:199016601,IS,,ISO 9040:1990,Information technology — Open Systems Interconnection — Virtual Terminal Basic Class Service,Technologies de l'information — Interconnexion des systèmes ouv
• ISO 9040:1990/Amd 2:199216603,IS,Amd,ISO 9040:1990/Amd 2:1992,Information technology — Open Systems Interconnection — Virtual Terminal Basic Class Service — Amendment 2,Technologies de l'information — Int
• ISO 9040:1990/Cor 1:199116604,IS,Cor,ISO 9040:1990/Cor 1:1991,Information technology — Open Systems Interconnection — Virtual Terminal Basic Class Service — Technical Corrigendum 1,Technologies de l'infor
• ISO 9040:1990/Cor 2:199221419,IS,Cor,ISO 9040:1990/Cor 2:1992,Information technology — Open Systems Interconnection — Virtual Terminal Basic Class Service — Technical Corrigendum 2,Technologies de l'infor
• ISO 9040:1990/Cor 3:199322674,IS,Cor,ISO 9040:1990/Cor 3:1993,Information technology — Open Systems Interconnection — Virtual Terminal Basic Class Service — Technical Corrigendum 3,Technologies de l'infor
• ISO 9041-1:199016606,IS,,ISO 9041-1:1990,Information technology — Open Systems Interconnection — Virtual Terminal Basic Class Protocol — Part 1: Specification,Technologies de l'information — Inte
• ISO 9041-1:1990/Amd 2:199216607,IS,Amd,ISO 9041-1:1990/Amd 2:1992,Information technology — Open Systems Interconnection — Virtual Terminal Basic Class Protocol — Part 1: Specification — Amendment 2,Technolo
• ISO 9041-1:1990/Cor 1:199221418,IS,Cor,ISO 9041-1:1990/Cor 1:1992,Information technology — Open Systems Interconnection — Virtual Terminal Basic Class Protocol — Part 1: Specification — Technical Corrigendu
• ISO 9041-1:1990/Cor 2:199322673,IS,Cor,ISO 9041-1:1990/Cor 2:1993,Information technology — Open Systems Interconnection — Virtual Terminal Basic Class Protocol — Part 1: Specification — Technical Corrigendu
• ISO 9042:198816609,IS,,ISO 9042:1988,Steels — Manual point counting method for statistically estimating the volume fraction of a constituent with a point grid,Aciers — Méthode manuelle d'estima
• ISO 9043:199116610,IS,,ISO 9043:1991,Mopeds — Measurement method for moments of inertia,Cyclomoteurs — Méthode de mesure des moments d'inertie,1991-10-24,1,['43.140'],ISO/TC 22,9599,,[45396],"[
• ISO 9044:199016611,IS,,ISO 9044:1990,Industrial woven wire cloth — Technical requirements and testing,Tissus métalliques industriels — Exigences techniques et vérifications,1990-09-13,1,['73.12
• ISO 9044:199928424,IS,,ISO 9044:1999,Industrial woven wire cloth — Technical requirements and tests,Tissus métalliques industriels — Exigences techniques et vérifications,1999-08-26,2,['73.120'
• ISO 9046:198716613,IS,,ISO 9046:1987,Building construction — Sealants — Determination of adhesion/cohesion properties at constant temperature,Construction immobilière — Mastics — Déterminaion d
• ISO 9046:200233679,IS,,ISO 9046:2002,Building construction — Jointing products — Determination of adhesion/cohesion properties of sealants at constant temperature,Construction immobilière — Pro
• ISO 9047:198916614,IS,,ISO 9047:1989,Building construction — Sealants — Determination of adhesion/cohesion properties at variable temperatures,Construction immobilière — Mastics — Détermination
• ISO 9050:199016617,IS,,ISO 9050:1990,"Glass in building — Determination of light transmittance, solar direct transmittance, total solar energy transmittance and ultraviolet transmittance, and r
• ISO 9050:200335062,IS,,ISO 9050:2003,"Glass in building — Determination of light transmittance, solar direct transmittance, total solar energy transmittance, ultraviolet transmittance and relat
• ISO 9051:199016618,IS,,ISO 9051:1990,"Glass in building — Glazed assemblies containing fire-resistant transparent or translucent glass, for use in building","Verre dans la construction — Ensemb
• ISO 9053-1:201869869,IS,,ISO 9053-1:2018,Acoustics — Determination of airflow resistance — Part 1: Static airflow method,Acoustique — Détermination de la résistance à l'écoulement de l'air — Part
• ISO 9053:199116622,IS,,ISO 9053:1991,Acoustics — Materials for acoustical applications — Determination of airflow resistance,Acoustique — Matériaux pour applications acoustiques — Détermination
• ISO 9058:199216627,IS,,ISO 9058:1992,Glass containers — Tolerances,Récipients en verre — Tolérances,1992-09-09,1,['55.100'],ISO/TC 63,9599,,[41965],"['en','fr']",2
• ISO 9059:199016628,IS,,ISO 9059:1990,Solar energy — Calibration of field pyrheliometers by comparison to a reference pyrheliometer,Énergie solaire — Étalonnage des pyrhéliomètres de terrain par
• ISO 9060:199016629,IS,,ISO 9060:1990,Solar energy — Specification and classification of instruments for measuring hemispherical solar and direct solar radiation,Énergie solaire — Spécification
• ISO 9061:198816630,IS,,ISO 9061:1988,"Acid-grade and ceramic-grade fluorspar — Determination of iron content — 1,10-Phenanthroline spectrometric method","Spaths fluor pour la fabrication de l'a
• ISO 9062:198916632,IS,,ISO 9062:1989,Acid-grade and ceramic-grade fluorspar — Determination of manganese content — Periodate spectrometric method,Spaths fluor pour la fabrication de l'acide flu
• ISO 9070:199016644,IS,,ISO 9070:1990,Information processing — SGML support facilities — Registration procedures for public text owner identifiers,Traitement de l'information — Facilités de supp
• ISO 9073-1:198916650,IS,,ISO 9073-1:1989,Textiles — Test methods for nonwovens — Part 1: Determination of mass per unit area,Textiles — Méthodes d'essai pour nontissés — Partie 1: Détermination d
• ISO 9073-2:198916651,IS,,ISO 9073-2:1989,Textiles — Test methods for nonwovens — Part 2: Determination of thickness,Textiles — Méthodes d'essai pour nontissés — Partie 2: Détermination de l'épais
• ISO 9073-3:198916653,IS,,ISO 9073-3:1989,Textiles — Test methods for nonwovens — Part 3: Determination of tensile strength and elongation,Textiles — Méthodes d'essai pour nontissés — Partie 3: Dé
• ISO 9073-4:198916654,IS,,ISO 9073-4:1989,Textiles — Test methods for nonwovens — Part 4: Determination of tear resistance,Textiles — Méthodes d'essai pour nontissés — Partie 4: Détermination de l
• ISO 9073-4:199724985,IS,,ISO 9073-4:1997,Textiles — Test methods for nonwovens — Part 4: Determination of tear resistance,Textiles — Méthodes d'essai pour nontissés — Partie 4: Détermination de l
• ISO 9073-5:200844285,IS,,ISO 9073-5:2008,Textiles — Test methods for nonwovens — Part 5: Determination of resistance to mechanical penetration (ball burst procedure),Textiles — Méthodes d'essai p
• ISO 9073-6:200033748,IS,,ISO 9073-6:2000,Textiles — Test methods for nonwovens — Part 6: Absorption,Textiles — Méthodes d'essai pour nontissés — Partie 6: Absorption,2000-12-07,1,['59.080.30'],IS
• ISO 9073-7:199516657,IS,,ISO 9073-7:1995,Textiles — Test methods for nonwovens — Part 7: Determination of bending length,Textiles — Méthodes d'essai pour nontissés — Partie 7: Détermination de la
• ISO 9073-8:199516658,IS,,ISO 9073-8:1995,Textiles — Test methods for nonwovens — Part 8: Determination of liquid strike-through time (simulated urine),Textiles — Méthodes d'essai pour nontissés —
• ISO 9073-9:199523471,IS,,ISO 9073-9:1995,Textiles — Test methods for nonwovens — Part 9: Determination of drape coefficient,Textiles — Méthodes d'essai pour nontissés — Partie 9: Détermination du
• ISO 9073-11:200230168,IS,,ISO 9073-11:2002,Textiles — Test methods for nonwovens — Part 11: Run-off,Textiles — Méthodes d'essai pour nontissés — Partie 11: Écoulement sur plan incliné,2002-10-30,1
• ISO 9073-13:200639393,IS,,ISO 9073-13:2006,Textiles — Test methods for nonwovens — Part 13: Repeated liquid strike-through time,Textiles — Méthodes d'essai pour nontissés — Partie 13: Temps de tra
• ISO 9073-14:200639394,IS,,ISO 9073-14:2006,Textiles — Test methods for nonwovens — Part 14: Coverstock wetback,Textiles — Méthodes d'essai pour nontissés — Partie 14: Remouillage de l'enveloppe,20
• ISO 9073-18:200742096,IS,,ISO 9073-18:2007,Textiles — Test methods for nonwovens — Part 18: Determination of breaking strength and elongation of nonwoven materials using the grab tensile test,Text
• ISO 9074:198916659,IS,,ISO 9074:1989,Information processing systems — Open Systems Interconnection — Estelle: A formal description technique based on an extended state transition model,Systèmes
• ISO 9074:1989/Amd 1:199316660,IS,Amd,ISO 9074:1989/Amd 1:1993,Information processing systems — Open Systems Interconnection — Estelle: A formal description technique based on an extended state transition
• ISO 9075:198716661,IS,,ISO 9075:1987,Information processing systems — Database language — SQL,Titre manque,1987-06-25,1,['35.060'],ISO/IEC JTC 1,9599,,[16662],,
• ISO 9076-2:200845810,IS,,ISO 9076-2:2008,Thermal insulation — Mineral-wool loose-fill for horizontal applications in ventilated roof spaces — Part 2: Principal responsibilities of installers,Isol
• ISO 9080:200328314,IS,,ISO 9080:2003,Plastics piping and ducting systems — Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation,Systèmes
• ISO 9086-1:198716673,IS,,ISO 9086-1:1987,Wood — Methods of physical and mechanical testing — Vocabulary — Part 1: General concepts and macrostructure,Bois — Méthodes d'essais physiques et mécaniq
• ISO 9089:198916677,IS,,ISO 9089:1989,Marine structures — Mobile offshore units — Anchor winches,Structures maritimes — Unités mobiles au large — Treuils d'ancrage,1989-11-16,1,['47.020.50'],ISO
• ISO 9090:198916678,IS,,ISO 9090:1989,Gas tightness of equipment for gas welding and allied processes,Étanchéité aux gaz des appareils pour soudage aux gaz et techniques connexes,1989-04-20,1,['
• ISO 9092:198816681,IS,,ISO 9092:1988,Textiles — Nonwovens — Definition,Textiles — Nontissés — Définition,1988-04-21,1,"['59.080.30','01.040.59']",ISO/TC 38,9599,,[50397],"['en','fr']",2
• ISO 9092:201150397,IS,,ISO 9092:2011,Textiles — Nonwovens — Definition,Textiles — Nontissés — Définition,2011-09-29,2,"['59.080.30','01.040.59']",ISO/TC 38,9599,[16681],[71369],"['en','fr']",1
• ISO 9092:201971369,IS,,ISO 9092:2019,Nonwovens — Vocabulary,Nontissés — Vocabulaire,2019-03-15,3,"['59.080.30','01.040.59']",ISO/TC 38,9599,[50397],[90537],"['en','fr']",3
• ISO 9093-1:199416682,IS,,ISO 9093-1:1994,Small craft — Seacocks and through-hull fittings — Part 1: Metallic,Navires de plaisance — Vannes de coque et passe-coques — Partie 1: Construction métall
• ISO 9093-2:200234494,IS,,ISO 9093-2:2002,Small craft — Seacocks and through-hull fittings — Part 2: Non-metallic,Petits navires — Vannes de coque et passe-coques — Partie 2: Construction non méta
• ISO 9094-1:200334497,IS,,ISO 9094-1:2003,Small craft — Fire protection — Part 1: Craft with a hull length of up to and including 15 m,Petits navires — Protection contre l'incendie — Partie 1: Bat
• ISO 9094-2:200234495,IS,,ISO 9094-2:2002,Small craft — Fire protection — Part 2: Craft with a hull length of over 15 m,Petits navires — Protection contre l'incendie — Partie 2: Bateaux d'une long
• ISO 9094:201561729,IS,,ISO 9094:2015,Small craft — Fire protection,Petits navires — Protection contre l'incendie,2015-11-13,1,['47.080'],ISO/TC 188,9599,"[34497,34495]",[78242],"['en','fr']",28
• ISO 9096:199216690,IS,,ISO 9096:1992,Stationary source emissions — Determination of concentration and mass flow rate of particulate material in gas-carrying ducts — Manual gravimetric method,Ém
• ISO 9096:200329717,IS,,ISO 9096:2003,Stationary source emissions — Manual determination of mass concentration of particulate matter,Émissions de sources fixes — Détermination manuelle de la con
• ISO 9096:2003/Cor 1:200645336,IS,Cor,ISO 9096:2003/Cor 1:2006,Stationary source emissions — Manual determination of mass concentration of particulate matter — Technical Corrigendum 1,Émissions de sources
• ISO 9098-1:199416692,IS,,ISO 9098-1:1994,Bunk beds for domestic use — Safety requirements and tests — Part 1: Safety requirements,Lits superposés pour usage domestique — Spécifications de sécurit
• ISO 9098-2:199416693,IS,,ISO 9098-2:1994,Bunk beds for domestic use — Safety requirements and tests — Part 2: Test methods,Lits superposés pour usage domestique — Spécifications de sécurité et es
• ISO 9099:198716694,IS,,ISO 9099:1987,Air-conditioning and ventilation of dry provision rooms on board ships — Design conditions and basis of calculations,Conditionnement d'air et ventilation de
• ISO 9100:199216695,IS,,ISO 9100:1992,Wide-mouth glass containers — Vacuum lug finishes — Dimensions,Récipients en verre à col large — Bagues à crans (bouchage sous vide) — Dimensions,1992-11-12
• ISO 9102:199016697,IS,,ISO 9102:1990,"Road vehicles — Compression-ignition engines — Screw-in injection nozzle holders, types 24, 25 and 26","Véhicules routiers — Moteurs à combustion interne à
• ISO 9104:199116699,IS,,ISO 9104:1991,Measurement of fluid flow in closed conduits — Methods of evaluating the performance of electromagnetic flow-meters for liquids,Mesure de débit des fluides
• ISO 9110-1:199016704,IS,,ISO 9110-1:1990,Hydraulic fluid power — Measurement techniques — Part 1: General measurement principles,Transmissions hydrauliques — Techniques de mesurage — Partie 1: Pr
• ISO 9110-2:199016705,IS,,ISO 9110-2:1990,Hydraulic fluid power — Measurement techniques — Part 2: Measurement of average steady-state pressure in a closed conduit,Transmissions hydrauliques — Tec
• ISO 9112:199116706,IS,,ISO 9112:1991,Truck and bus tyres — Method of measuring tyre rolling circumference — Loaded new tyres,Pneumatiques pour véhicules utilitaires et autobus — Méthode de mesu
• ISO 9113:198616708,IS,,ISO 9113:1986,Plastics — Polypropylene (PP) and propylene-copolymer thermoplastics — Determination of isotactic index,Plastiques — Thermoplastiques à base de polypropylèn
• ISO 9116:199216711,IS,,ISO 9116:1992,Green coffee — Guidance on methods of specification,Café vert — Guide sur les méthodes de spécification,1992-04-09,1,['67.140.20'],ISO/TC 34/SC 15,9599,,[39
• ISO 9116:200439373,IS,,ISO 9116:2004,Green coffee — Guidelines on methods of specification,Café vert — Lignes directrices sur les méthodes de spécification,2004-11-23,2,['67.140.20'],ISO/TC 34/
• ISO 9117:199016712,IS,,ISO 9117:1990,Paints and varnishes — Determination of through-dry state and through-dry time — Method of test,Peintures et vernis — Détermination du séchage à coeur et du
• ISO 9123:200129455,IS,,ISO 9123:2001,Measurement of liquid flow in open channels — Stage-fall-discharge relationships,Mesure de débit des liquides dans les canaux découverts — Relations hauteur
• ISO 9125:199016721,IS,,ISO 9125:1990,Fibre-cement slates and fittings,Ardoises et leurs accessoires en fibres-ciment,1990-11-29,1,['91.100.40'],ISO/TC 77,9599,,[45792],"['en','fr']",9
• ISO 9125:1990/Amd 1:200437631,IS,Amd,ISO 9125:1990/Amd 1:2004,Fibre-cement slates and fittings — Amendment 1,Ardoises et leurs accessoires en fibres-ciment — Amendement 1,2004-08-23,1,['91.100.40'],ISO/TC
• ISO 9125:1990/Cor 1:199321828,IS,Cor,ISO 9125:1990/Cor 1:1993,Fibre-cement slates and fittings — Technical Corrigendum 1,Ardoises et leurs accessoires en fibres-ciment — Rectificatif technique 1,1993-02-1
• ISO 9125:1990/Cor 2:200542282,IS,Cor,ISO 9125:1990/Cor 2:2005,Fibre-cement slates and fittings — Technical Corrigendum 2,Ardoises et leurs accessoires en fibres-ciment — Rectificatif technique 2,2005-06-0
• ISO 9127:198816723,IS,,ISO 9127:1988,Information processing systems — User documentation and cover information for consumer software packages,Systèmes de traitement de l'information — Documenta
• ISO 9128:198716724,IS,,ISO 9128:1987,Road vehicles — Graphical symbols to designate brake fluid types,Véhicules routiers — Symboles graphiques pour la désignation des types de liquides de frein
• ISO 9129:198816725,IS,,ISO 9129:1988,Motorcycles — Measurement methods for moments of inertia,Motocycles — Méthodes de mesure des moments d'inertie,1988-12-29,1,['43.140'],ISO/TC 22,9599,,"[429
• ISO 9130:198916726,IS,,ISO 9130:1989,Motorcycles — Measurement method for location of centre of gravity,Motocycles — Méthode de mesure de l'emplacement du centre de gravité,1989-05-18,1,['43.14
• ISO 9136:198916732,IS,,ISO 9136:1989,Abrasive macrograins — Determination of bulk density,Macrograins abrasifs — Détermination de la masse volumique apparente,1989-11-30,1,['25.100.70'],ISO/TC
• ISO 9138:199316734,IS,,ISO 9138:1993,Abrasive grains — Sampling and splitting,Grains abrasifs — Échantillonnage et division,1993-01-28,1,['25.100.70'],ISO/TC 29/SC 5,9599,,"[33698,60012]","['en
• ISO 9139:199816735,IS,,ISO 9139:1998,"Aerospace — Nuts, plain or slotted (castellated) — Procurement specification",Aéronautique et espace — Écrous ordinaires ou à créneaux — Spécification d'ap
• ISO 9142:199016739,IS,,ISO 9142:1990,Adhesives — Guide to the selection of standard laboratory ageing conditions for testing bonded joints,Adhésifs — Guide pour la sélection de conditions norma
• ISO 9142:1990/Cor 1:199526714,IS,Cor,ISO 9142:1990/Cor 1:1995,Adhesives — Guide to the selection of standard laboratory ageing conditions for testing bonded joints — Technical Corrigendum 1,Adhésifs — Gui
• ISO 9148:198716745,IS,,ISO 9148:1987,Composition cork in rolls for decoration — Test methods,Rouleaux d'aggloméré composé de liège pour décoration — Méthodes d'essai,1987-10-08,1,['79.100'],ISO
• ISO 9149:198716746,IS,,ISO 9149:1987,Composition cork in rolls for decoration — Specifications,Rouleaux d'aggloméré composé de liège pour décoration — Spécifications,1987-08-27,1,['79.100'],ISO
• ISO 9151:199516748,IS,,ISO 9151:1995,Protective clothing against heat and flame — Determination of heat transmission on exposure to flame,Vêtements de protection contre la chaleur et les flamme
• ISO 9154:199916751,IS,,ISO 9154:1999,"Aerospace — Bolts, with MJ threads, made of heat-resistant nickel-based alloy, strength class 1 550 MPa — Procurement specification","Aéronautique et espac
• ISO 9156:198916753,IS,,ISO 9156:1989,"Aerospace — Nuts, anchor, self-locking, fixed, 90 degrees corner, reduced series, with counterbore, with MJ threads, coated or uncoated, classification 1 1
• ISO 9157:198816754,IS,,ISO 9157:1988,"Aerospace — Nuts, spline-drive, self-locking, with MJ threads, coated or uncoated, classification 1 100 MPa/650 degrees C, 1 250 MPa/760 degrees C, 1 550 M
• ISO 9161:200431742,IS,,ISO 9161:2004,Uranium dioxide powder — Determination of apparent density and tap density,Poudre de dioxyde d'uranium — Détermination de la masse volumique apparente et de
• ISO 9162:198916759,IS,,ISO 9162:1989,Petroleum products — Fuels (class F) — Liquefied petroleum gases — Specifications,Produits pétroliers — Combustibles (classe F) — Gaz de pétrole liquéfiés —
• ISO 9163:199616760,IS,,ISO 9163:1996,Textile glass — Rovings — Manufacture of test specimens and determination of tensile strength of impregnated rovings,Verre textile — Stratifils — Fabricatio
• ISO 9167-1:199216763,IS,,ISO 9167-1:1992,Rapeseed — Determination of glucosinolates content — Part 1: Method using high-performance liquid chromatography,Graines de colza — Dosage des glucosinola
• ISO 9167-1:1992/Amd 1:201361350,IS,Amd,ISO 9167-1:1992/Amd 1:2013,Rapeseed — Determination of glucosinolates content — Part 1: Method using high-performance liquid chromatography — Amendment 1,Graines de co
• ISO 9168:198816765,IS,,ISO 9168:1988,Dental handpieces — Hose connectors,Pièces à main dentaires — Connexions,1988-03-24,1,['11.060.20'],ISO/TC 106/SC 4,9599,,[16766],,
• ISO 9168:199116766,IS,,ISO 9168:1991,Dental handpieces — Hose connectors,Pièces à main dentaires — Connexions,1991-08-29,2,['11.060.20'],ISO/TC 106/SC 4,9599,[16765],[46572],"['en','fr']",6
• ISO 9169:199416767,IS,,ISO 9169:1994,Air quality — Determination of performance characteristics of measurement methods,Qualité de l'air — Détermination des caractéristiques de performance des m
• ISO 9170-1:199926351,IS,,ISO 9170-1:1999,Terminal units for medical gas pipeline systems — Part 1: Terminal units for use with compressed medical gases and vacuum,Prises murales pour réseaux de d
• ISO 9170-1:200842055,IS,,ISO 9170-1:2008,Terminal units for medical gas pipeline systems — Part 1: Terminal units for use with compressed medical gases and vacuum,Prises murales pour systèmes de
• ISO 9170-2:199927252,IS,,ISO 9170-2:1999,Terminal units for medical gas pipeline systems — Part 2: Terminal units for anaesthetic gas scavenging systems,Prises murales pour réseaux de distributio
• ISO 9170:199016768,IS,,ISO 9170:1990,Terminal units for use in medical gas pipeline systems,Prises murales utilisées dans des réseaux de distribution de gaz médicaux,1990-10-11,1,['11.040.10'],
• ISO 9173-1:199116775,IS,,ISO 9173-1:1991,Dental extraction forceps — Part 1: Screw and pin joint types,Daviers à usage dentaire — Partie 1: Types d'articulations à vis ou à tourillon,1991-07-11,1
• ISO 9173-1:200634694,IS,,ISO 9173-1:2006,Dentistry — Extraction forceps — Part 1: General requirements and test methods,Art dentaire — Daviers — Partie 1: Exigences générales et méthodes d'essai,
• ISO 9174:199016777,IS,,ISO 9174:1990,Water quality — Determination of total chromium — Atomic absorption spectrometric methods,Qualité de l'eau — Dosage du chrome total — Méthodes par spectromé
• ISO 9177-1:198916781,IS,,ISO 9177-1:1989,"Mechanical pencils — Part 1: Classification, dimensions, performance requirements and testing","Porte-mine — Partie 1: Classification, dimensions, caract
• ISO 9177-1:201157586,IS,,ISO 9177-1:2011,"Mechanical pencils — Part 1: Classification, dimensions, performance requirements and testing","Porte-mine — Partie 1: Classification, dimensions, caract
• ISO 9177-2:198916782,IS,,ISO 9177-2:1989,Mechanical pencils — Part 2: Black leads — Classification and dimensions,Porte-mine — Partie 2: Mines graphite — Classification et dimensions,1989-03-16,1
• ISO 9177-3:199420426,IS,,ISO 9177-3:1994,Mechanical pencils — Part 3: Black leads — Bending strengths of HB leads,Porte-mine — Partie 3: Mines graphite — Résistance à la flexion des mines HB,1994
• ISO 9181:199016788,IS,,ISO 9181:1990,Tools for pressing — Round punches with 60 degrees conical head and reduced shank,Outillage de presse — Poinçons ronds à tête conique à 60 degrés et à corps
• ISO 9182-1:199216789,IS,,ISO 9182-1:1992,Tools for pressing — Guide pillars — Part 1: Types,Outillage de presse — Colonnes de guidage — Partie 1: Types,1992-06-18,1,['25.120.10'],ISO/TC 29/SC 8,9
• ISO 9182-1:201360718,IS,,ISO 9182-1:2013,Tools for pressing — Guide pillars — Part 1: Types,Outillage de presse — Colonnes de guidage — Partie 1: Types,2013-12-11,2,['25.120.10'],ISO/TC 29/SC 8,9
• ISO 9182-2:199216790,IS,,ISO 9182-2:1992,"Tools for pressing — Guide pillars — Part 2: Type A, straight pillars","Outillage de presse — Colonnes de guidage — Partie 2: Type A, colonnes droites",1
• ISO 9182-2:201360719,IS,,ISO 9182-2:2013,"Tools for pressing — Guide pillars — Part 2: Type A, straight pillars","Outillage de presse — Colonnes de guidage — Partie 2: Type A, colonnes droites",2
• ISO 9182-3:199216791,IS,,ISO 9182-3:1992,"Tools for pressing — Guide pillars — Part 3: Type B, end-locking pillars","Outillage de presse — Colonnes de guidage — Partie 3: Type B, colonnes à reten
• ISO 9182-3:201360720,IS,,ISO 9182-3:2013,"Tools for pressing — Guide pillars — Part 3: Type B, end-locking pillars","Outillage de presse — Colonnes de guidage — Partie 3: Type B, colonnes à reten
• ISO 9182-3:202079118,IS,,ISO 9182-3:2020,"Tools for pressing — Guide pillars — Part 3: Type B, end-locking pillars","Outillage de presse — Colonnes de guidage — Partie 3: Type B, colonnes à reten
• ISO 9182-4:199216792,IS,,ISO 9182-4:1992,"Tools for pressing — Guide pillars — Part 4: Type C, pillars with taper lead and bush","Outillage de presse — Colonnes de guidage — Partie 4: Type C, col
• ISO 9182-4:201360721,IS,,ISO 9182-4:2013,"Tools for pressing — Guide pillars — Part 4: Type C, pillars with taper lead and bush","Outillage de presse — Colonnes de guidage — Partie 4: Type C, col
• ISO 9182-4:202079119,IS,,ISO 9182-4:2020,"Tools for pressing — Guide pillars — Part 4: Type C, pillars with taper lead and bush","Outillage de presse — Colonnes de guidage — Partie 4: Type C, col
• ISO 9182-5:199216793,IS,,ISO 9182-5:1992,"Tools for pressing — Guide pillars — Part 5: Type D, end-locking pillars with flange","Outillage de presse — Colonnes de guidage — Partie 5: Type D, colo
• ISO 9182-5:201360722,IS,,ISO 9182-5:2013,"Tools for pressing — Guide pillars — Part 5: Type D, end-locking pillars with flange","Outillage de presse — Colonnes de guidage — Partie 5: Type D, colo
• ISO 9182-5:202079120,IS,,ISO 9182-5:2020,"Tools for pressing — Guide pillars — Part 5: Type D, end-locking pillars with flange","Outillage de presse — Colonnes de guidage — Partie 5: Type D, colo
• ISO 9183-1:199016800,IS,,ISO 9183-1:1990,Tools for pressing — Wear plates for press dies — Part 1: Type A,Outillage de presse — Plaques de frottement — Partie 1: Type A,1990-11-22,1,['25.120.10']
• ISO 9183-2:199316801,IS,,ISO 9183-2:1993,Tools for pressing — Wear plates for press dies — Part 2: Type B,Outillage de presse — Plaques de frottement — Partie 2: Type B,1993-07-22,1,['25.120.10']
• ISO 9184-1:199016802,IS,,ISO 9184-1:1990,"Paper, board and pulps — Fibre furnish analysis — Part 1: General method","Papier, carton et pâtes — Détermination de la composition fibreuse — Partie 1:
• ISO 9185:199016809,IS,,ISO 9185:1990,Protective clothing — Assessment of resistance of materials to molten metal splash,Vêtements de protection — Évaluation de la résistance des matériaux à la
• ISO 9185:200741479,IS,,ISO 9185:2007,Protective clothing — Assessment of resistance of materials to molten metal splash,Vêtements de protection — Évaluation de la résistance des matériaux aux p
• ISO 9186-1:200741090,IS,,ISO 9186-1:2007,Graphical symbols — Test methods — Part 1: Methods for testing comprehensibility,Symboles graphiques — Méthodes d'essai — Partie 1: Méthodes de vérificati
• ISO 9186:198916810,IS,,ISO 9186:1989,Procedures for the development and testing of public information symbols,Procédures pour le développement et les essais des symboles destinés à l'informatio
• ISO 9186:200123669,IS,,ISO 9186:2001,Graphical symbols — Test methods for judged comprehensibility and for comprehension,Symboles graphiques — Méthodes d'essai pour la compréhensibilité estimée
• ISO 9187-1:199116811,IS,,ISO 9187-1:1991,Injection equipment for medical use — Part 1: Ampoules for injectables,Matériel d'injection à usage médical — Partie 1: Ampoules pour produits injectables
• ISO 9187-1:200028349,IS,,ISO 9187-1:2000,Injection equipment for medical use — Part 1: Ampoules for injectables,Matériel d'injection à usage médical — Partie 1: Ampoules pour produits injectables
• ISO 9187-1:200643593,IS,,ISO 9187-1:2006,Injection equipment for medical use — Part 1: Ampoules for injectables,Matériel d'injection à usage médical — Partie 1: Ampoules pour produits injectables
• ISO 9187-2:199316812,IS,,ISO 9187-2:1993,Injection equipment for medical use — Part 2: One-point-cut (OPC) ampoules,Matériel d'injection à usage médical — Partie 2: Ampoules à un seul point de ca
• ISO 9197-1:198916822,IS,,ISO 9197-1:1989,"Paper, board and pulps — Determination of water-soluble chlorides — Part 1: General method","Papiers, cartons et pâtes — Détermination des chlorures solu
• ISO 9197-2:199016823,IS,,ISO 9197-2:1990,"Paper, board and pulps — Determination of water-soluble chlorides — Part 2: Method for high purity products","Papiers, cartons et pâtes — Détermination d
• ISO 9197:199827981,IS,,ISO 9197:1998,"Paper, board and pulps — Determination of water-soluble chlorides","Papier, carton et pâtes — Détermination des chlorures solubles dans l'eau",1998-11-19,1
• ISO 9197:200639772,IS,,ISO 9197:2006,"Paper, board and pulps — Determination of water-soluble chlorides","Papier, carton et pâtes — Détermination des chlorures solubles dans l'eau",2006-04-27,2
• ISO 9198:198916824,IS,,ISO 9198:1989,"Paper, board and pulps — Determination of water-soluble sulfates — Titrimetric method","Papiers, cartons et pâtes — Détermination des sulfates solubles dan
• ISO 9198:200131629,IS,,ISO 9198:2001,"Paper, board and pulp — Determination of water-soluble sulfates","Papier, carton et pâte — Détermination des sulfates solubles dans l'eau",2001-05-24,2,"['
• ISO 9199:198716825,IS,,ISO 9199:1987,"Aerospace — Self-locking bihexagonal nuts, classifications 1 100 MPa/650 degrees C, 1 250 MPa/760 degrees C, 1 550 MPa/235 degrees C and 1 550 MPa/650 degr
• ISO 9200:199316826,IS,,ISO 9200:1993,Crude petroleum and liquid petroleum products — Volumetric metering of viscous hydrocarbons,Pétrole brut et produits pétroliers liquides — Mesurage volumétr
• ISO 9202:199116828,IS,,ISO 9202:1991,Jewellery — Fineness of precious metal alloys,Joaillerie — Titre des alliages de métaux précieux,1991-09-12,1,['39.060'],ISO/TC 174,9599,,[57656],"['en','fr
• ISO 9202:201457656,IS,,ISO 9202:2014,Jewellery — Fineness of precious metal alloys,"Joaillerie, bijouterie — Titre des alliages de métaux précieux",2014-11-20,2,['39.060'],ISO/TC 174,9599,[1682
• ISO 9202:201975692,IS,,ISO 9202:2019,Jewellery and precious metals — Fineness of precious metal alloys,"Joaillerie, bijouterie et métaux précieux — Titre des alliages de métaux précieux",2019-0
• ISO 9206:199016833,IS,,ISO 9206:1990,Aerospace — Constant displacement hydraulic motors — General specifications,Aéronautique et espace — Moteurs hydrauliques à cylindrée fixe — Spécifications
• ISO 9206:201661655,IS,,ISO 9206:2016,Aerospace series — Constant displacement hydraulic motors — General specifications,Série aérospatiale — Moteurs hydrauliques à cylindrée fixe — Spécificatio
• ISO 9207:199516834,IS,,ISO 9207:1995,Manually portable chain-saws with internal combustion engine — Determination of sound power levels — Engineering method (grade 2),Scies à chaîne portatives
• ISO 9211-1:199416838,IS,,ISO 9211-1:1994,Optics and optical instruments — Optical coatings — Part 1: Definitions,Optique et instruments d'optique — Traitements optiques — Partie 1: Définitions,19
• ISO 9211-1:201045849,IS,,ISO 9211-1:2010,Optics and photonics — Optical coatings — Part 1: Definitions,Optique et photonique — Traitements optiques — Partie 1: Définitions,2010-03-11,2,"['37.020'
• ISO 9211-1:201870345,IS,,ISO 9211-1:2018,Optics and photonics — Optical coatings — Part 1: Vocabulary,Optique et photonique — Traitements optiques — Partie 1: Vocabulaire,2018-09-26,3,"['37.020',
• ISO 9211-2:199421501,IS,,ISO 9211-2:1994,Optics and optical instruments — Optical coatings — Part 2: Optical properties,Optique et instruments d'optique — Traitements optiques — Partie 2: Proprié
• ISO 9211-2:201045850,IS,,ISO 9211-2:2010,Optics and photonics — Optical coatings — Part 2: Optical properties,Optique et photonique — Traitements optiques — Partie 2: Propriétés optiques,2010-03-

← records 10,401–10,800 · All of Withdrawn and superseded ISO standards · records 11,201 on →