Records 11,201–11,600 — Withdrawn and superseded ISO standards

Records 11,201 to 11,600 of 24,640. Each links to its own page, which carries the source URL and the quoted line that states the value.

• ISO 9211-3:199421502,IS,,ISO 9211-3:1994,Optics and optical instruments — Optical coatings — Part 3: Environmental durability,Optique et instruments d'optique — Traitements optiques — Partie 3: C
• ISO 9211-3:200844241,IS,,ISO 9211-3:2008,Optics and photonics — Optical coatings — Part 3: Environmental durability,Optique et photonique — Traitements optiques — Partie 3: Durabilité environneme
• ISO 9211-4:199622560,IS,,ISO 9211-4:1996,Optics and optical instruments — Optical coatings — Part 4: Specific test methods,Optique et instruments d'optique — Traitements optiques — Partie 4: Méth
• ISO 9211-4:200640931,IS,,ISO 9211-4:2006,Optics and optical instruments — Optical coatings — Part 4: Specific test methods,Optique et instruments d'optique — Traitements optiques — Partie 4: Méth
• ISO 9211-4:201256077,IS,,ISO 9211-4:2012,Optics and photonics — Optical coatings — Part 4: Specific test methods,Optique et photonique — Traitements optiques — Partie 4: Méthodes d'essai spécifiq
• ISO 9211-7:201869400,IS,,ISO 9211-7:2018,Optics and photonics — Optical coatings — Part 7: Minimum requirements for neutral beam splitter coatings,Optique et photonique — Traitements optiques — P
• ISO 9213:199216841,IS,,ISO 9213:1992,Measurement of total discharge in open channels — Electromagnetic method using a full-channel-width coil,Mesurage du débit total dans les canaux découverts
• ISO 9220:198816849,IS,,ISO 9220:1988,Metallic coatings — Measurement of coating thickness — Scanning electron microscope method,Revêtements métalliques — Mesurage de l'épaisseur de revêtement —
• ISO 9221-1:199216850,IS,,ISO 9221-1:1992,Furniture — Children's high chairs — Part 1: Safety requirements,Ameublement — Chaises hautes pour enfants — Partie 1: Prescriptions de sécurité,1992-06-1
• ISO 9221-1:201566795,IS,,ISO 9221-1:2015,Furniture — Children's high chairs — Part 1: Safety requirements,Ameublement — Chaises hautes pour enfants — Partie 1: Prescriptions de sécurité,2015-11-0
• ISO 9221-2:199216851,IS,,ISO 9221-2:1992,Furniture — Children's high chairs — Part 2: Test methods,Ameublement — Chaises hautes pour enfants — Partie 2: Méthodes d'essai,1992-06-18,1,['97.140'],I
• ISO 9221-2:201566798,IS,,ISO 9221-2:2015,Furniture — Children's high chairs — Part 2: Test methods,Ameublement — Chaises hautes pour enfants — Partie 2: Méthodes d'essai,2015-11-03,2,['97.140'],I
• ISO 9223:199216855,IS,,ISO 9223:1992,Corrosion of metals and alloys — Corrosivity of atmospheres — Classification,Corrosion des métaux et alliages — Corrosivité des atmosphères — Classification
• ISO 9224:199216856,IS,,ISO 9224:1992,Corrosion of metals and alloys — Corrosivity of atmospheres — Guiding values for the corrosivity categories,Corrosion des métaux et alliages — Corrosivité d
• ISO 9225:199216857,IS,,ISO 9225:1992,Corrosion of metals and alloys — Corrosivity of atmospheres — Measurement of pollution,Corrosion des métaux et alliages — Corrosivité des atmosphères — Mesu
• ISO 9226:199216858,IS,,ISO 9226:1992,Corrosion of metals and alloys — Corrosivity of atmospheres — Determination of corrosion rate of standard specimens for the evaluation of corrosivity,Corros
• ISO 9227:199016859,IS,,ISO 9227:1990,Corrosion tests in artificial atmospheres — Salt spray tests,Essais de corrosion en atmosphères artificielles — Essais aux brouillards salins,1990-12-13,1,[
• ISO 9227:200633276,IS,,ISO 9227:2006,Corrosion tests in artificial atmospheres — Salt spray tests,Essais de corrosion en atmosphères artificielles — Essais aux brouillards salins,2006-07-06,2,[
• ISO 9227:201260000,IS,,ISO 9227:2012,Corrosion tests in artificial atmospheres — Salt spray tests,Essais de corrosion en atmosphères artificielles — Essais aux brouillards salins,2012-05-15,3,[
• ISO 9227:201763543,IS,,ISO 9227:2017,Corrosion tests in artificial atmospheres — Salt spray tests,Essais de corrosion en atmosphères artificielles — Essais aux brouillards salins,2017-03-17,4,[
• ISO 9229:199116861,IS,,ISO 9229:1991,"Thermal insulation — Materials, products and systems — Vocabulary",Isolation thermique — Vocabulaire,1991-10-17,1,"['01.040.27','27.220']",ISO/TC 163,9599,
• ISO 9229:200741496,IS,,ISO 9229:2007,Thermal insulation — Vocabulary,Isolation thermique — Vocabulaire,2007-07-02,2,"['01.040.27','27.220']",ISO/TC 163,9599,[16861],[73303],"['de','en','fr']",3
• ISO 9230:199116862,IS,,ISO 9230:1991,Information and documentation — Determination of price indexes for books and serials purchased by libraries,Information et documentation — Détermination des
• ISO 9233-1:200740105,IS,,ISO 9233-1:2007,"Cheese, cheese rind and processed cheese — Determination of natamycin content — Part 1: Molecular absorption spectrometric method for cheese rind","Froma
• ISO 9233-1:2007/Amd 1:201257059,IS,Amd,ISO 9233-1:2007/Amd 1:2012,"Cheese, cheese rind and processed cheese — Determination of natamycin content — Part 1: Molecular absorption spectrometric method for chees
• ISO 9233-2:200740106,IS,,ISO 9233-2:2007,"Cheese, cheese rind and processed cheese — Determination of natamycin content — Part 2: High-performance liquid chromatographic method for cheese, cheese
• ISO 9233-2:2007/Amd 1:201257060,IS,Amd,ISO 9233-2:2007/Amd 1:2012,"Cheese, cheese rind and processed cheese — Determination of natamycin content — Part 2: High-performance liquid chromatographic method for
• ISO 9233:199116865,IS,,ISO 9233:1991,Cheese and cheese rind — Determination of natamycin content — Method by molecular absorption spectrometry and by high-performance liquid chromatography,From
• ISO 9235:199716866,IS,,ISO 9235:1997,Aromatic natural raw materials — Vocabulary,Matières premières aromatiques d'origine naturelle — Vocabulaire,1997-04-10,1,"['71.100.60','01.040.71']",ISO/TC
• ISO 9235:201351017,IS,,ISO 9235:2013,Aromatic natural raw materials — Vocabulary,Matières premières aromatiques naturelles — Vocabulaire,2013-12-02,2,"['71.100.60','01.040.71']",ISO/TC 54,9599,
• ISO 9235:2013/Cor 1:201466365,IS,Cor,ISO 9235:2013/Cor 1:2014,Aromatic natural raw materials — Vocabulary — Technical Corrigendum 1,Matières premières aromatiques naturelles — Vocabulaire — Rectificatif t
• ISO 9236-1:199616867,IS,,ISO 9236-1:1996,"Photography — Sensitometry of screen/film systems for medical radiography — Part 1: Determination of sensitometric curve shape, speed and average gradien
• ISO 9239-1:199716871,IS,,ISO 9239-1:1997,Reaction to fire tests — Horizontal surface spread of flame on floor-covering systems — Part 1: Flame spread using a radiant heat ignition source,Essais d
• ISO 9239-1:1997/Cor 1:199729555,IS,Cor,ISO 9239-1:1997/Cor 1:1997,Reaction to fire tests — Horizontal surface spread of flame on floor-covering systems — Part 1: Flame spread using a radiant heat ignition s
• ISO 9239-1:1997/Cor 2:199830334,IS,Cor,ISO 9239-1:1997/Cor 2:1998,Reaction to fire tests — Horizontal surface spread of flame on floor-covering systems — Part 1: Flame spread using a radiant heat ignition s
• ISO 9239-1:200225600,IS,,ISO 9239-1:2002,Reaction to fire tests for floorings — Part 1: Determination of the burning behaviour using a radiant heat source,Essais de réaction au feu des revêtement
• ISO 9239-1:201045781,IS,,ISO 9239-1:2010,Reaction to fire tests for floorings — Part 1: Determination of the burning behaviour using a radiant heat source,Essais de réaction au feu des revêtement
• ISO 9241-1:199216873,IS,,ISO 9241-1:1992,Ergonomic requirements for office work with visual display terminals (VDTs) — Part 1: General introduction,Exigences ergonomiques pour travail de bureau a
• ISO 9241-3:199216875,IS,,ISO 9241-3:1992,Ergonomic requirements for office work with visual display terminals (VDTs) — Part 3: Visual display requirements,Exigences ergonomiques pour travail de b
• ISO 9241-3:1992/Amd 1:200028934,IS,Amd,ISO 9241-3:1992/Amd 1:2000,Ergonomic requirements for office work with visual display terminals (VDTs) — Part 3: Visual display requirements — Amendment 1: .,Exigences
• ISO 9241-4:199816876,IS,,ISO 9241-4:1998,Ergonomic requirements for office work with visual display terminals (VDTs) — Part 4: Keyboard requirements,Exigences ergonomiques pour travail de bureau
• ISO 9241-4:1998/Cor 1:200034603,IS,Cor,ISO 9241-4:1998/Cor 1:2000,Ergonomic requirements for office work with visual display terminals (VDTs) — Part 4: Keyboard requirements — Technical Corrigendum 1,Exigen
• ISO 9241-5:199816877,IS,,ISO 9241-5:1998,Ergonomic requirements for office work with visual display terminals (VDTs) — Part 5: Workstation layout and postural requirements,Exigences ergonomiques
• ISO 9241-7:199816879,IS,,ISO 9241-7:1998,Ergonomic requirements for office work with visual display terminals (VDTs) — Part 7: Requirements for display with reflections,Exigences ergonomiques pou
• ISO 9241-8:199716880,IS,,ISO 9241-8:1997,Ergonomic requirements for office work with visual display terminals (VDTs) — Part 8: Requirements for displayed colours,Exigences ergonomiques pour trava
• ISO 9241-9:200030030,IS,,ISO 9241-9:2000,Ergonomic requirements for office work with visual display terminals (VDTs) — Part 9: Requirements for non-keyboard input devices,Exigences ergonomiques p
• ISO 9241-10:199616882,IS,,ISO 9241-10:1996,Ergonomic requirements for office work with visual display terminals (VDTs) — Part 10: Dialogue principles,Exigences ergonomiques pour travail de bureau
• ISO 9241-11:199816883,IS,,ISO 9241-11:1998,Ergonomic requirements for office work with visual display terminals (VDTs) — Part 11: Guidance on usability,Exigences ergonomiques pour travail de burea
• ISO 9241-12:199816884,IS,,ISO 9241-12:1998,Ergonomic requirements for office work with visual display terminals (VDTs) — Part 12: Presentation of information,Exigences ergonomiques pour travail de
• ISO 9241-17:199816889,IS,,ISO 9241-17:1998,Ergonomic requirements for office work with visual display terminals (VDTs) — Part 17: Form filling dialogues,Exigences ergonomiques pour travail de bure
• ISO 9241-20:200840727,IS,,ISO 9241-20:2008,Ergonomics of human-system interaction — Part 20: Accessibility guidelines for information/communication technology (ICT) equipment and services,Ergonomi
• ISO 9241-110:200638009,IS,,ISO 9241-110:2006,Ergonomics of human-system interaction — Part 110: Dialogue principles,Ergonomie de l'interaction homme-système — Partie 110: Principes de dialogue,2006
• ISO 9241-112:201764840,IS,,ISO 9241-112:2017,Ergonomics of human-system interaction — Part 112: Principles for the presentation of information,Ergonomie de l'interaction homme-système — Partie 112:
• ISO 9241-161:201660476,IS,,ISO 9241-161:2016,Ergonomics of human-system interaction — Part 161: Guidance on visual user-interface elements,Ergonomie de l'interaction homme-système — Partie 161: Élé
• ISO 9241-171:200839080,IS,,ISO 9241-171:2008,Ergonomics of human-system interaction — Part 171: Guidance on software accessibility,Ergonomie de l'interaction homme-système — Partie 171: Lignes dire
• ISO 9241-210:201052075,IS,,ISO 9241-210:2010,Ergonomics of human-system interaction — Part 210: Human-centred design for interactive systems,Ergonomie de l'interaction homme-système — Partie 210: C
• ISO 9241-303:200840098,IS,,ISO 9241-303:2008,Ergonomics of human-system interaction — Part 303: Requirements for electronic visual displays,Ergonomie de l'interaction homme-système — Partie 303: Ex
• ISO 9241-306:200840101,IS,,ISO 9241-306:2008,Ergonomics of human-system interaction — Part 306: Field assessment methods for electronic visual displays,Ergonomie de l'interaction homme-système — Pa
• ISO 9241-920:200942904,IS,,ISO 9241-920:2009,Ergonomics of human-system interaction — Part 920: Guidance on tactile and haptic interactions,Ergonomie de l'interaction homme-système — Partie 920: Li
• ISO 9244:199516894,IS,,ISO 9244:1995,Earth-moving machinery — Safety signs and hazard pictorials — General principles,Engins de terrassement — Signaux de sécurité et de danger — Principes génér
• ISO 9249:198916899,IS,,ISO 9249:1989,Earth-moving machinery — Engine test code — Net power,Engins de terrassement — Code d'essai des moteurs — Puissance nette,1989-11-23,1,['53.100'],ISO/TC 127
• ISO 9249:199724929,IS,,ISO 9249:1997,Earth-moving machinery — Engine test code — Net power,Engins de terrassement — Code d'essai des moteurs — Puissance nette,1997-08-21,2,['53.100'],ISO/TC 127
• ISO 9249:1997/Cor 1:199929725,IS,Cor,ISO 9249:1997/Cor 1:1999,Earth-moving machinery — Engine test code — Net power — Technical Corrigendum 1,Engins de terrassement — Code d'essai des moteurs — Puissance
• ISO 9255:199316905,IS,,ISO 9255:1993,"Aerospace — Bolts, normal spline head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than o
• ISO 9260:199116910,IS,,ISO 9260:1991,Agricultural irrigation equipment — Emitters — Specification and test methods,Matériel agricole d'irrigation — Goutteurs — Spécifications et méthodes d'essa
• ISO 9261:199116911,IS,,ISO 9261:1991,Agricultural irrigation equipment — Emitting-pipe systems — Specification and test methods,Matériel agricole d'irrigation — Gaines de micro-irrigation — Spé
• ISO 9270:199216920,IS,,ISO 9270:1992,7/24 tapers for tool shanks for automatic changing — Tapers for spindle noses,Cônes d'emmanchement d'outils à conicité 7/24 pour changement automatique — Cô
• ISO 9271:199216921,IS,,ISO 9271:1992,Decontamination of radioactively contaminated surfaces — Testing of decontamination agents for textiles,Décontamination des surfaces contaminées par la radi
• ISO 9276-1:199016926,IS,,ISO 9276-1:1990,Representation of results of particle size analysis — Part 1: Graphical representation,Représentation de données obtenues par analyse granulométrique — Pa
• ISO 9276-1:199825860,IS,,ISO 9276-1:1998,Representation of results of particle size analysis — Part 1: Graphical representation,Représentation de données obtenues par analyse granulométrique — Pa
• ISO 9276-1:1998/Cor 1:200439860,IS,Cor,ISO 9276-1:1998/Cor 1:2004,Representation of results of particle size analysis — Part 1: Graphical representation — Technical Corrigendum 1,Représentation de données o
• ISO 9276-2:200133997,IS,,ISO 9276-2:2001,Representation of results of particle size analysis — Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions
• ISO 9277:199516928,IS,,ISO 9277:1995,Determination of the specific surface area of solids by gas adsorption using the BET method,Détermination de l'aire massique (surface spécifique) des solide
• ISO 9277:201044941,IS,,ISO 9277:2010,Determination of the specific surface area of solids by gas adsorption — BET method,Détermination de l'aire massique (surface spécifique) des solides par ad
• ISO 9278:199216929,IS,,ISO 9278:1992,Uranium dioxide pellets — Determination of density and amount of open and closed porosity — Boiling water method and penetration immersion method,Pastilles
• ISO 9283:199016937,IS,,ISO 9283:1990,Manipulating industrial robots — Performance criteria and related test methods,Robots manipulateurs industriels — Critères de performance et méthodes d'essa
• ISO 9283:1990/Amd 1:199116938,IS,Amd,ISO 9283:1990/Amd 1:1991,Manipulating industrial robots — Performance criteria and related test methods — Amendment 1: Guide for selection of performance criteria for
• ISO 9284:199216939,IS,,ISO 9284:1992,Abrasive grains — Test-sieving machines,Grains abrasifs — Machine à tamiser de contrôle,1992-06-25,1,"['25.100.70','19.120']",ISO/TC 29/SC 5,9599,,"[60014,3
• ISO 9286:199716941,IS,,ISO 9286:1997,Abrasive grains and crude — Chemical analysis of silicon carbide,Abrasifs en grains ou en roche — Analyse chimique du carbure de silicium,1997-01-22,1,['25.
• ISO 9288:198916943,IS,,ISO 9288:1989,Thermal insulation — Heat transfer by radiation — Physical quantities and definitions,Isolation thermique — Transfert de chaleur par rayonnement — Grandeurs
• ISO 9290:199016945,IS,,ISO 9290:1990,Textiles — Woven fabrics — Determination of tear resistance by the falling pendulum method,Textiles — Tissus — Détermination de la résistance au déchirement
• ISO 9291:199616946,IS,,ISO 9291:1996,Textile-glass-reinforced plastics — Rovings — Preparation of unidirectional plates by winding,Plastiques renforcés de verre textile — Stratifils — Préparati
• ISO 9293:198716948,IS,,ISO 9293:1987,Information processing — Volume and file structure of flexible disk cartridges for information interchange,Traitement de l'information — Volume et structure
• ISO 9295:198816950,IS,,ISO 9295:1988,Acoustics — Measurement of high-frequency noise emitted by computer and business equipment,Acoustique — Mesurage du bruit à haute fréquence émis par les mat
• ISO 9296:198816951,IS,,ISO 9296:1988,Acoustics — Declared noise emission values of computer and business equipment,Acoustique — Valeurs déclarées d'émission acoustique des matériels informatiqu
• ISO 9298:199516953,IS,,ISO 9298:1995,Rubber compounding ingredients — Zinc oxide — Test methods,Ingrédients de mélange du caoutchouc — Oxyde de zinc — Méthodes d'essai,1995-11-23,1,['83.040.20'
• ISO 9300:199016956,IS,,ISO 9300:1990,Measurement of gas flow by means of critical flow Venturi nozzles,Mesure de débit de gaz au moyen de Venturi-tuyères en régime critique,1990-07-24,1,['17.12
• ISO 9300:200534272,IS,,ISO 9300:2005,Measurement of gas flow by means of critical flow Venturi nozzles,Mesure de débit de gaz au moyen de Venturi-tuyères en régime critique,2005-08-19,2,['17.12
• ISO 9302:198916958,IS,,ISO 9302:1989,Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes — Electromagnetic testing for verification of hydraulic leak-tightness,T
• ISO 9302:199416959,IS,,ISO 9302:1994,Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes — Electromagnetic testing for verification of hydraulic leak-tightness,T
• ISO 9303:198916960,IS,,ISO 9303:1989,Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes — Full peripheral ultrasonic testing for the detection of longitudinal i
• ISO 9304:198916961,IS,,ISO 9304:1989,Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes — Eddy current testing for the detection of imperfections,Tubes en acier
• ISO 9305:198916962,IS,,ISO 9305:1989,Seamless steel tubes for pressure purposes — Full peripheral ultrasonic testing for the detection of transverse imperfections,Tubes en acier sans soudure po
• ISO 9308-1:199016966,IS,,ISO 9308-1:1990,"Water quality — Detection and enumeration of coliform organisms, thermotolerant coliform organisms and presumptive Escherichia coli — Part 1: Membrane fi
• ISO 9308-1:200026404,IS,,ISO 9308-1:2000,Water quality — Detection and enumeration of Escherichia coli and coliform bacteria — Part 1: Membrane filtration method,Qualité de l'eau — Recherche et d
• ISO 9308-1:2000/Cor 1:200745799,IS,Cor,ISO 9308-1:2000/Cor 1:2007,Water quality — Detection and enumeration of Escherichia coli and coliform bacteria — Part 1: Membrane filtration method — Technical Corrige
• ISO 9308-2:199016967,IS,,ISO 9308-2:1990,"Water quality — Detection and enumeration of coliform organisms, thermotolerant coliform organisms and presumptive Escherichia coli — Part 2: Multiple tu
• ISO 9309:198916968,IS,,ISO 9309:1989,Refrigerant compressors — Presentation of performance data,Compresseurs pour fluides frigorigènes — Présentation des performances,1989-06-08,1,['27.200'],IS
• ISO 9311-2:200234449,IS,,ISO 9311-2:2002,Adhesives for thermoplastic piping systems — Part 2: Determination of shear strength,Adhésifs pour réseaux de tuyauteries en matières thermoplastiques — P
• ISO 9312:199016971,IS,,ISO 9312:1990,Resistance welding equipment — Insulated pins for use in electrode back-ups,Équipement de soudage par résistance — Fiches isolées utilisées dans les contre-
• ISO 9316:198916980,IS,,ISO 9316:1989,Information processing systems — Small Computer System Interface (SCSI),Systèmes de traitement de l'information — Interface système pour petits ordinateurs
• ISO 9328-1:199116999,IS,,ISO 9328-1:1991,Steel plates and strips for pressure purposes — Technical delivery conditions — Part 1: General requirements,Tôles et bandes en acier pour service sous pr
• ISO 9328-1:200334983,IS,,ISO 9328-1:2003,Steel flat products for pressure purposes — Technical delivery conditions — Part 1: General requirements,Produits plats en acier pour service sous pressio
• ISO 9328-1:201151718,IS,,ISO 9328-1:2011,Steel flat products for pressure purposes — Technical delivery conditions — Part 1: General requirements,Produits plats en acier pour service sous pressio
• ISO 9328-2:199117000,IS,,ISO 9328-2:1991,Steel plates and strips for pressure purposes — Technical delivery conditions — Part 2: Unalloyed and low-alloyed steels with specified room temperature a
• ISO 9328-2:200434984,IS,,ISO 9328-2:2004,Steel flat products for pressure purposes — Technical delivery conditions — Part 2: Non-alloy and alloy steels with specified elevated temperature propert
• ISO 9328-2:201153419,IS,,ISO 9328-2:2011,Steel flat products for pressure purposes — Technical delivery conditions — Part 2: Non-alloy and alloy steels with specified elevated temperature propert
• ISO 9328-3:199117001,IS,,ISO 9328-3:1991,Steel plates and strips for pressure purposes — Technical delivery conditions — Part 3: Nickel-alloyed steels with specified low temperature properties,Tô
• ISO 9328-3:200434985,IS,,ISO 9328-3:2004,"Steel flat products for pressure purposes — Technical delivery conditions — Part 3: Weldable fine grain steels, normalized","Produits plats en acier pour
• ISO 9328-3:201157549,IS,,ISO 9328-3:2011,"Steel flat products for pressure purposes — Technical delivery conditions — Part 3: Weldable fine grain steels, normalized","Produits plats en acier pour
• ISO 9328-4:199117002,IS,,ISO 9328-4:1991,Steel plates and strips for pressure purposes — Technical delivery conditions — Part 4: Weldable fine grain steels with high proof stress supplied in the
• ISO 9328-4:200434986,IS,,ISO 9328-4:2004,Steel flat products for pressure purposes — Technical delivery conditions — Part 4: Nickel-alloy steels with specified low temperature properties,Produits
• ISO 9328-4:201157550,IS,,ISO 9328-4:2011,Steel flat products for pressure purposes — Technical delivery conditions — Part 4: Nickel-alloy steels with specified low temperature properties,Produits
• ISO 9328-5:199117003,IS,,ISO 9328-5:1991,Steel plates and strips for pressure purposes — Technical delivery conditions — Part 5: Austenitic steels,Tôles et bandes en acier pour service sous press
• ISO 9328-5:200434987,IS,,ISO 9328-5:2004,"Steel flat products for pressure purposes — Technical delivery conditions — Part 5: Weldable fine grain steels, thermomechanically rolled","Produits plat
• ISO 9328-5:201157551,IS,,ISO 9328-5:2011,"Steel flat products for pressure purposes — Technical delivery conditions — Part 5: Weldable fine grain steels, thermomechanically rolled","Produits plat
• ISO 9328-6:200434218,IS,,ISO 9328-6:2004,"Steel flat products for pressure purposes — Technical delivery conditions — Part 6: Weldable fine grain steels, quenched and tempered","Produits plats en
• ISO 9328-6:201157552,IS,,ISO 9328-6:2011,"Steel flat products for pressure purposes — Technical delivery conditions — Part 6: Weldable fine grain steels, quenched and tempered","Produits plats en
• ISO 9328-7:200434219,IS,,ISO 9328-7:2004,Steel flat products for pressure purposes — Technical delivery conditions — Part 7: Stainless steels,Produits plats en acier pour service sous pression —
• ISO 9328-7:201151726,IS,,ISO 9328-7:2011,Steel flat products for pressure purposes — Technical delivery conditions — Part 7: Stainless steels,Produits plats en acier pour service sous pression —
• ISO 9333:199017015,IS,,ISO 9333:1990,Dentistry -Brazing materials,Art dentaire - Produits pour brasage,1990-05-24,1,['11.060.10'],ISO/TC 106/SC 2,9599,,"[36589,40139]","['en','fr']",4
• ISO 9333:200640139,IS,,ISO 9333:2006,Dentistry — Brazing materials,Art dentaire — Produits pour brasage,2006-07-12,2,['11.060.10'],ISO/TC 106/SC 2,9599,[17015],[78377],"['en','fr']",8
• ISO 9334:199517016,IS,,ISO 9334:1995,Optics and optical instruments — Optical transfer function — Definitions and mathematical relationships,Optique et instruments d'optique — Fonction de trans
• ISO 9334:200744594,IS,,ISO 9334:2007,Optics and photonics — Optical transfer function — Definitions and mathematical relationships,Optique et photonique — Fonction de transfert optique — Défini
• ISO 9335:199517017,IS,,ISO 9335:1995,Optics and photonics — Optical transfer function — Principles and procedures of measurement,Optique et photonique — Fonction de transfert optique — Principe
• ISO 9335:1995/Cor 1:200543233,IS,Cor,ISO 9335:1995/Cor 1:2005,Optics and photonics — Optical transfer function — Principles and procedures of measurement — Technical Corrigendum 1,Optique et photonique —
• ISO 9335:201257565,IS,,ISO 9335:2012,Optics and photonics — Optical transfer function — Principles and procedures of measurement,Optique et photonique — Fonction de transfert optique — Principe
• ISO 9336-1:199417018,IS,,ISO 9336-1:1994,Optics and optical instruments — Optical transfer function — Application — Part 1: Interchangeable lenses for 35 mm still cameras,Optique et instruments d
• ISO 9336-3:199417020,IS,,ISO 9336-3:1994,Optics and optical instruments — Optical transfer function — Application — Part 3: Telescopes,Optique et instruments d'optique — Fonction de transfert opt
• ISO 9337-1:199917021,IS,,ISO 9337-1:1999,Contact lenses — Determination of back vertex power — Part 1: Method using focimeter with manual focusing,Lentilles de contact — Détermination de la puiss
• ISO 9337-2:200427467,IS,,ISO 9337-2:2004,Contact lenses — Determination of back vertex power — Part 2: Measurement of contact lenses immersed in saline,Lentilles de contact — Détermination de la
• ISO 9338:199617022,IS,,ISO 9338:1996,Optics and optical instruments — Contact lenses — Determination of the diameters,Optique et instruments d'optique — Lentilles de contact — Détermination des
• ISO 9339-1:199617023,IS,,ISO 9339-1:1996,Optics and optical instruments — Contact lenses — Determination of the thickness — Part 1: Rigid contact lenses,Optique et instruments d'optique — Lentill
• ISO 9339-2:199825850,IS,,ISO 9339-2:1998,Optics and optical instruments — Contact lenses — Determination of thickness — Part 2: Hydrogel contact lenses,Optique et instruments d'optique — Lentille
• ISO 9339-2:1998/Cor 1:200033790,IS,Cor,ISO 9339-2:1998/Cor 1:2000,Optics and optical instruments — Contact lenses — Determination of thickness — Part 2: Hydrogel contact lenses — Technical Corrigendum 1,Opt
• ISO 9341:199617025,IS,,ISO 9341:1996,Optics and optical instruments — Contact lenses — Determination of inclusions and surface imperfections for rigid contact lenses,Optique et instruments d'op
• ISO 9342-1:200536374,IS,,ISO 9342-1:2005,Optics and optical instruments — Test lenses for calibration of focimeters — Part 1: Test lenses for focimeters used for measuring spectacle lenses,Optiqu
• ISO 9342:199617026,IS,,ISO 9342:1996,Optics and optical instruments — Test lenses for calibration of focimeters,Optique et instruments d'optique — Verres étalons pour l'étalonnage des frontofoc
• ISO 9343:198817027,IS,,ISO 9343:1988,Pliers and nippers — Slip joint pliers — Dimensions and test values,Pinces et tenailles — Pinces réglables à deux positions — Dimensions et valeurs d'essai,
• ISO 9343:200433647,IS,,ISO 9343:2004,Pliers and nippers — Slip joint pliers — Dimensions and test values,Pinces et tenailles — Pinces réglables à deux positions — Dimensions et valeurs d'essai,
• ISO 9344:199617028,IS,,ISO 9344:1996,Optics and optical instruments — Microscopes — Graticules for eyepieces,Optique et instruments d'optique — Microscopes — Réticules pour oculaires,1996-12-05
• ISO 9344:201151307,IS,,ISO 9344:2011,Microscopes — Graticules for eyepieces,Microscopes — Réticules pour oculaires,2011-08-04,2,['37.020'],ISO/TC 172/SC 5,9599,[17028],[67549],['en'],3
• ISO 9345-1:199617029,IS,,ISO 9345-1:1996,Optics and optical instruments — Microscopes — Imaging distances related to mechanical reference planes — Part 1: Tube length 160 mm,Optique et instrument
• ISO 9345-1:201261065,IS,,ISO 9345-1:2012,Microscopes — Imaging distances related to mechanical reference planes — Part 1: Tube length 160 mm,Microscopes — Tirages mécaniques en fonction des plans
• ISO 9345-2:200330229,IS,,ISO 9345-2:2003,Optics and optical instruments — Microscopes: Imaging distances related to mechanical reference planes — Part 2: Infinity-corrected optical systems,Optiqu
• ISO 9345-2:201464986,IS,,ISO 9345-2:2014,Microscopes — Imaging distances related to mechanical reference planes — Part 2: Infinity-corrected optical systems,Microscopes — Tirages mécaniques en fo
• ISO 9346:198717030,IS,,ISO 9346:1987,Thermal insulation — Mass transfer — Physical quantities and definitions,Isolation thermique — Transfert de masse — Grandeurs physiques et définitions,1987-
• ISO 9346:1987/Amd 1:199621537,IS,Amd,ISO 9346:1987/Amd 1:1996,Thermal insulation — Mass transfer — Physical quantities and definitions — Amendment 1,Isolation thermique — Transfert de masse — Grandeurs ph
• ISO 9349:199117032,IS,,ISO 9349:1991,Preinsulated ductile iron pipeline systems,Systèmes de canalisations préisolées en fonte ductile,1991-05-23,1,"['93.025','77.140.75']",ISO/TC 5/SC 2,9599,,[
• ISO 9349:200436709,IS,,ISO 9349:2004,Preinsulated ductile iron pipeline systems,Systèmes de canalisations préisolées en fonte ductile,2004-06-17,2,"['93.025','77.140.75']",ISO/TC 5/SC 2,9599,[1
• ISO 9352:198917036,IS,,ISO 9352:1989,Plastics — Determination of resistance to wear by abrasive wheels,Plastiques — Détermination de la résistance à l'usure par galets abrasifs,1989-10-12,1,['8
• ISO 9352:199525171,IS,,ISO 9352:1995,Plastics — Determination of resistance to wear by abrasive wheels,Plastiques — Détermination de la résistance à l'usure par galets abrasifs,1995-10-26,2,['8
• ISO 9353:199117037,IS,,ISO 9353:1991,Glass-reinforced plastics — Preparation of plates with unidirectional reinforcements by bag moulding,Plastiques renforcés au verre textile — Préparation des
• ISO 9356:198917040,IS,,ISO 9356:1989,Polyolefin pipe assemblies with or without jointed fittings — Resistance to internal pressure — Test method,Assemblages de tubes en polyoléfines comportant
• ISO 9360:199217044,IS,,ISO 9360:1992,Anaesthetic and respiratory equipment — Heat and moisture exchangers for use in humidifying respired gases in humans,Matériel d'anesthésie et de réanimation
• ISO 9361-1:199117045,IS,,ISO 9361-1:1991,Indexable inserts for cutting tools — Ceramic inserts with rounded corners — Part 1: Dimensions of inserts without fixing hole,Plaquettes amovibles pour o
• ISO 9361-2:199117046,IS,,ISO 9361-2:1991,Indexable inserts for cutting tools — Ceramic inserts with rounded corners — Part 2: Dimensions of inserts with cylindrical fixing hole,Plaquettes amovibl
• ISO 9362:198717047,IS,,ISO 9362:1987,Banking — Banking telecommunication messages — Bank identifier codes,Banque — Messages bancaires télétransmis — Code d'identification des banques,1987-10-22
• ISO 9362:199422738,IS,,ISO 9362:1994,Banking — Banking telecommunication messages — Bank identifier codes,Banque — Messages bancaires télétransmis — Code d'identification des banques,1994-12-22
• ISO 9362:200952017,IS,,ISO 9362:2009,Banking — Banking telecommunication messages — Business identifier code (BIC),Banque — Messages bancaires télétransmis — Code d'identification des entrepris
• ISO 9362:201460390,IS,,ISO 9362:2014,Banking — Banking telecommunication messages — Business identifier code (BIC),Banque — Messages bancaires télétransmis — Code d'identification des entrepris
• ISO 9363-1:199417048,IS,,ISO 9363-1:1994,Optics and optical instruments — Contact lenses — Determination of cytotoxicity of contact lens material — Part 1: Agar overlay test and growth inhibition
• ISO 9364:199117049,IS,,ISO 9364:1991,"Continuous hot-dip aluminium/zinc-coated steel sheet of commercial, lock-forming and structural qualities","Tôles en acier revêtues en continu par immersio
• ISO 9364:200127962,IS,,ISO 9364:2001,"Continuous hot-dip aluminium/zinc-coated steel sheet of commercial, drawing and structural qualities","Tôles en acier revêtues en continu par immersion à c
• ISO 9364:200637775,IS,,ISO 9364:2006,"Continuous hot-dip aluminium/zinc-coated steel sheet of commercial, drawing and structural qualities","Tôles en acier revêtues en continu par immersion à c
• ISO 9364:201155863,IS,,ISO 9364:2011,"Continuous hot-dip 55 % aluminium/zinc alloy-coated steel sheet of commercial, drawing and structural qualities","Tôles en acier revêtues en continu par im
• ISO 9366:199017051,IS,,ISO 9366:1990,Composition cork floor tiles — Determination and control of squareness and straightness of edges,Dalles d'aggloméré composé de liège pour revêtements des so
• ISO 9369:199725518,IS,,ISO 9369:1997,Plastics — Basic materials for polyurethanes — Pure isocyanates — Analysis of isocyanate groups,Plastiques — Matières de base pour polyuréthannes — Isocyana
• ISO 9370:199717057,IS,,ISO 9370:1997,Plastics — Instrumental determination of radiant exposure in weathering tests — General guidance and basic test method,Plastiques — Détermination au moyen d
• ISO 9370:200941858,IS,,ISO 9370:2009,Plastics — Instrumental determination of radiant exposure in weathering tests — General guidance and basic test method,Plastiques — Détermination au moyen d
• ISO 9371:199017058,IS,,ISO 9371:1990,Plastics — Phenolic resins in the liquid state or in solution — Determination of viscosity,Plastiques — Résines phénoliques liquides ou en solution — Déterm
• ISO 9374-1:198917061,IS,,ISO 9374-1:1989,Cranes — Information to be provided — Part 1: General,Appareils de levage à charge suspendue — Informations à fournir — Partie 1: Généralités,1989-11-09,1
• ISO 9374-3:200234675,IS,,ISO 9374-3:2002,"Cranes — Information to be provided for enquiries, orders, offers and supply — Part 3: Tower cranes","Appareils de levage à charge suspendue — Informatio
• ISO 9374-4:198917064,IS,,ISO 9374-4:1989,Cranes — Information to be provided — Part 4: Jib cranes,Appareils de levage à charge suspendue — Informations à fournir — Partie 4: Grues à flèche,1989-1
• ISO 9374-5:199117065,IS,,ISO 9374-5:1991,Cranes — Information to be provided — Part 5: Overhead travelling cranes and portal bridge cranes,Appareils de levage à charge suspendue — Informations à
• ISO 9379:198917071,IS,,ISO 9379:1989,Doorsets — Repeated opening and closing test,Blocs-portes — Essai de fonctionnement répété,1989-12-07,1,['91.060.50'],ISO/TC 162,9599,,[42861],"['en','fr']"
• ISO 9381:198917073,IS,,ISO 9381:1989,Doorsets — Static torsion test,Blocs-portes — Essai de torsion statique,1989-09-28,1,['91.060.50'],ISO/TC 162,9599,,[42862],"['en','fr']",2
• ISO 9383:199517075,IS,,ISO 9383:1995,Products in fibre-reinforced cement — Short corrugated or asymmetrical section sheets and fittings for roofing,Produits en ciment renforcé par des fibres —
• ISO 9383:1995/Amd 1:200437632,IS,Amd,ISO 9383:1995/Amd 1:2004,Products in fibre-reinforced cement — Short corrugated or asymmetrical section sheets and fittings for roofing — Amendment 1,Produits en cimen
• ISO 9383:1995/Cor 1:200542284,IS,Cor,ISO 9383:1995/Cor 1:2005,Products in fibre-reinforced cement — Short corrugated or asymmetrical section sheets and fittings for roofing — Technical Corrigendum 1,Produ
• ISO 9384:199117076,IS,,ISO 9384:1991,Fibre-cement siding shingles,Bardeaux en fibres-ciment,1991-06-20,1,['91.100.40'],ISO/TC 77,9599,,"[45792,45793,46368]","['en','fr']",9
• ISO 9384:1991/Amd 1:200437633,IS,Amd,ISO 9384:1991/Amd 1:2004,Fibre-cement siding shingles — Amendment 1,Bardeaux en fibres-ciment — Amendement 1,2004-09-13,1,['91.100.40'],ISO/TC 77,9599,,"[45792,45793,4
• ISO 9384:1991/Cor 1:200542286,IS,Cor,ISO 9384:1991/Cor 1:2005,Fibre-cement siding shingles — Technical Corrigendum 1,Bardeaux en fibres-ciment — Rectificatif technique 1,2005-06-02,1,['91.100.40'],ISO/TC
• ISO 9391:199317083,IS,,ISO 9391:1993,"Water quality — Sampling in deep waters for macro-invertebrates — Guidance on the use of colonization, qualitative and quantitative samplers","Qualité de l
• ISO 9393-1:199417085,IS,,ISO 9393-1:1994,Thermoplastics valves — Pressure test methods and requirements — Part 1: General,Robinets en matériaux thermoplastiques — Méthodes d'essai de pression hyd
• ISO 9393-2:199717086,IS,,ISO 9393-2:1997,"Thermoplastics valves — Pressure test methods and requirements — Part 2: Test conditions and basic requirements for PE, PP, PVC-U and PVDF valves","Robin
• ISO 9393-2:1997/Cor 1:199729760,IS,Cor,ISO 9393-2:1997/Cor 1:1997,"Thermoplastics valves — Pressure test methods and requirements — Part 2: Test conditions and basic requirements for PE, PP, PVC-U and PVDF
• ISO 9394:199417087,IS,,ISO 9394:1994,Optics and optical instruments — Determination of biological compatibility of contact lens material — Testing of the contact lens system by ocular study wit
• ISO 9394:199827463,IS,,ISO 9394:1998,Ophthalmic optics — Contact lenses and contact lens care products — Determination of biocompatibility by ocular study using rabbit eyes,Optique ophtalmique
• ISO 9396:198917089,IS,,ISO 9396:1989,Plastics — Phenolic resins — Determination of the gel time at a given temperature using automatic apparatus,Plastiques — Résines phénoliques — Détermination
• ISO 9397:198917090,IS,,ISO 9397:1989,Plastics — Phenolic resins — Determination of free formaldehyde content,Plastiques — Résines phénoliques — Dosage du formaldéhyde libre,1989-03-09,1,['83.08
• ISO 9397:199525123,IS,,ISO 9397:1995,Plastics — Phenolic resins — Determination of free-formaldehyde content — Hydroxylamine hydrochloride method,Plastiques — Résines phénoliques — Dosage du fo
• ISO 9398-1:199317092,IS,,ISO 9398-1:1993,Specifications for industrial laundry machines — Definitions and testing of capacity and consumption characteristics — Part 1: Flatwork ironing machines,S
• ISO 9398-2:199317094,IS,,ISO 9398-2:1993,Specifications for industrial laundry machines — Definitions and testing of capacity and consumption characteristics — Part 2: Batch drying tumblers,Spéci
• ISO 9398-3:199317095,IS,,ISO 9398-3:1993,Specifications for industrial laundry machines — Definitions and testing of capacity and consumption characteristics — Part 3: Washing tunnels,Spécificati
• ISO 9398-4:199317096,IS,,ISO 9398-4:1993,Specifications for industrial laundry machines — Definitions and testing of capacity and consumption characteristics — Part 4: Washer-extractors,Spécifica
• ISO 9401:199117099,IS,,ISO 9401:1991,Machine tools — Jaw mountings on power chucks,Machines-outils — Dentelures pour mors de mandrins,1991-07-11,1,['25.060.20'],ISO/TC 39/SC 8,9599,,"[32137,396
• ISO 9402:198917100,IS,,ISO 9402:1989,Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes — Full peripheral magnetic transducer/flux leakage testing of ferromagne
• ISO 9405:200126836,IS,,ISO 9405:2001,Textile floor coverings — Assessment of changes in appearance,Revêtements de sol textiles — Évaluation des changements d'aspect,2001-03-15,1,['97.150'],ISO/
• ISO 9406:198817105,IS,,ISO 9406:1988,Carbonaceous materials for the production of aluminium — Green coke — Determination of volatile matter content by gravimetric analysis,Produits carbonés uti
• ISO 9407:199117106,IS,,ISO 9407:1991,Shoe sizes — Mondopoint system of sizing and marking,Pointure des chaussures — Système Mondopoint de mesure et de marquage,1991-10-24,1,['61.060'],ISO/TC 13
• ISO 9408:199117107,IS,,ISO 9408:1991,Water quality — Evaluation in an aqueous medium of the 'ultimate' aerobic biodegradability of organic compounds — Method by determining the oxygen demand in
• ISO 9408:1991/Cor 1:199221003,IS,Cor,ISO 9408:1991/Cor 1:1992,Water quality — Evaluation in an aqueous medium of the 'ultimate' aerobic biodegradability of organic compounds — Method by determining the ox
• ISO 9409-1:198817108,IS,,ISO 9409-1:1988,Manipulating industrial robots — Mechanical interfaces — Part 1: Circular (form A),Robots manipulateurs industriels — Interfaces mécaniques — Partie 1: In
• ISO 9409-1:199620624,IS,,ISO 9409-1:1996,Manipulating industrial robots — Mechanical interfaces — Part 1: Plates (form A),Robots manipulateurs industriels — Interfaces mécaniques — Partie 1: Inte
• ISO 9409-1:1996/Cor 1:199830479,IS,Cor,ISO 9409-1:1996/Cor 1:1998,Manipulating industrial robots — Mechanical interfaces — Part 1: Plates (form A) — Technical Corrigendum 1,Robots manipulateurs industriels
• ISO 9409-2:199620625,IS,,ISO 9409-2:1996,Manipulating industrial robots — Mechanical interfaces — Part 2: Shafts (form A),Robots manipulateurs industriels — Interfaces mécaniques — Partie 2: Inte
• ISO 9411-1:199417110,IS,,ISO 9411-1:1994,Solid mineral fuels — Mechanical sampling from moving streams — Part 1: Coal,Combustibles minéraux solides — Échantillonnage mécanique sur minéraux en mou
• ISO 9411-2:199317111,IS,,ISO 9411-2:1993,Solid mineral fuels — Mechanical sampling from moving streams — Part 2: Coke,Combustibles minéraux solides — Échantillonnage mécanique sur minéraux en mou
• ISO 9413:199817113,IS,,ISO 9413:1998,Tyre valves — Dimensions and designation,Valves pour pneumatiques — Dimensions et désignation,1998-12-20,1,['83.160.01'],ISO/TC 31/SC 9,9599,[18542],[46219]
• ISO 9413:1998/Amd 1:200126090,IS,Amd,ISO 9413:1998/Amd 1:2001,Tyre valves — Dimensions and designation — Amendment 1: Addition of valves using ISO core chamber No.3,Valves pour pneumatiques — Dimensions e
• ISO 9413:1998/Amd 2:200436623,IS,Amd,ISO 9413:1998/Amd 2:2004,Tyre valves — Dimensions and designation — Amendment 2,Valves pour pneumatiques — Dimensions et désignation — Amendement 2,2004-10-14,1,['83.1
• ISO 9413:201246219,IS,,ISO 9413:2012,Tyre valves — Dimensions and designation,Valves pour pneumatiques — Dimensions et désignation,2012-02-22,2,['83.160.01'],ISO/TC 31/SC 9,9599,"[26090,36623,1
• ISO 9413:2012/Amd 1:201261850,IS,Amd,ISO 9413:2012/Amd 1:2012,Tyre valves — Dimensions and designation — Amendment 1,Valves pour pneumatiques — Dimensions et désignation — Amendement 1,2012-09-24,2,['83.1
• ISO 9416:199817117,IS,,ISO 9416:1998,Paper — Determination of light scattering and absorption coefficients (using Kubelka-Munk theory),Papier — Détermination des coefficients de diffusion et d'
• ISO 9416:200939773,IS,,ISO 9416:2009,Paper — Determination of light scattering and absorption coefficients (using Kubelka-Munk theory),Papier — Détermination des coefficients de diffusion et d'
• ISO 9424:198917125,IS,,ISO 9424:1989,Wood-based panels — Determination of dimensions of test pieces,Panneaux à base de bois — Détermination des dimensions des éprouvettes,1989-10-05,1,['79.060.
• ISO 9425:198917126,IS,,ISO 9425:1989,Wood-based panels — Determination of moisture content,Panneaux à base de bois — Détermination de l'humidité,1989-09-28,1,['79.060.01'],ISO/TC 89,9599,"[5046
• ISO 9426-1:198917127,IS,,ISO 9426-1:1989,"Wood-based panels — Determination of dimensions — Part 1: Determination of thickness, width and length","Panneaux à base de bois — Détermination des dime
• ISO 9427:198917129,IS,,ISO 9427:1989,Wood-based panels — Determination of density,Panneaux à base de bois — Détermination de la masse volumique,1989-10-26,1,['79.060.01'],ISO/TC 89,9599,"[9340,
• ISO 9438:198917140,IS,,ISO 9438:1989,Metallurgical-grade fluorspar — Determination of total phosphorus content — Reduced molybdophosphate spectrometric method,Spaths fluor utilisables dans l'in
• ISO 9439:199017142,IS,,ISO 9439:1990,Water quality — Evaluation in an aqueous medium of the 'ultimate' aerobic biodegradability of organic compounds — Method by analysis of released carbon diox
• ISO 9439:1990/Cor 1:199221002,IS,Cor,ISO 9439:1990/Cor 1:1992,Water quality — Evaluation in an aqueous medium of the 'ultimate' aerobic biodegradability of organic compounds — Method by analysis of releas
• ISO 9441:198817144,IS,,ISO 9441:1988,Steel — Determination of niobium content — PAR spectrophotometric method,Aciers — Dosage du niobium — Méthode spectrophotométrique au PAR,1988-12-08,1,['77.
• ISO 9443:199117146,IS,,ISO 9443:1991,Heat-treatable and alloy steels — Surface quality classes for hot-rolled round bars and wire rods — Technical delivery conditions,Aciers pour traitements th
• ISO 9444:199017147,IS,,ISO 9444:1990,Hot-rolled stainless steel wide strip and sheet — Tolerances on dimensions and form,Larges bandes et tôles en acier inoxydable laminées à chaud — Tolérances
• ISO 9444:200226687,IS,,ISO 9444:2002,"Continuously hot-rolled stainless steel strip, plate/sheet and cut lengths — Tolerances on dimensions and form","Bandes, tôles et feuillards coupés à longu
• ISO 9445:199017148,IS,,ISO 9445:1990,Cold-rolled stainless steel wide strip and sheet — Tolerances on dimensions and form,Larges bandes et tôles en acier inoxydable laminées à froid — Tolérance
• ISO 9445:200226688,IS,,ISO 9445:2002,"Continuously cold-rolled stainless steel narrow strip, wide strip, plate/sheet and cut lengths — Tolerances on dimensions and form","Feuillards, larges ban
• ISO 9446:199017149,IS,,ISO 9446:1990,Hot-rolled stainless steel narrow strip — Tolerances on dimensions and form,Feuillards en acier inoxydable laminés à chaud — Tolérances sur dimensions et fo
• ISO 9447:199017150,IS,,ISO 9447:1990,Cold-rolled stainless steel narrow strip — Tolerances on dimensions and form,Feuillards en acier inoxydable laminés à froid — Tolérances sur dimensions et f
• ISO 9448-1:199117151,IS,,ISO 9448-1:1991,Tools for pressing — Guide bushes — Part 1: Forms,Outillage de presse — Bagues de guidage — Partie 1: Formes,1991-10-24,1,['25.120.10'],ISO/TC 29/SC 8,959
• ISO 9448-2:199117152,IS,,ISO 9448-2:1991,"Tools for pressing — Guide bushes — Part 2: Form A, gliding bushes, plain, type 1","Outillage de presse — Bagues de guidage — Partie 2: Forme A, bagues l
• ISO 9448-3:199117153,IS,,ISO 9448-3:1991,"Tools for pressing — Guide bushes — Part 3: Form B, ball cage bushes, plain, type 1","Outillage de presse — Bagues de guidage — Partie 3: Forme B, bagues
• ISO 9448-4:199117154,IS,,ISO 9448-4:1991,"Tools for pressing — Guide bushes — Part 4: Form C, gliding bushes, headed, type 1","Outillage de presse — Bagues de guidage — Partie 4: Forme C, bagues
• ISO 9448-5:199117155,IS,,ISO 9448-5:1991,"Tools for pressing — Guide bushes — Part 5: Form D, ball cage bushes, headed, type 1","Outillage de presse — Bagues de guidage — Partie 5: Forme D, bague
• ISO 9448-6:199117156,IS,,ISO 9448-6:1991,"Tools for pressing — Guide bushes — Part 6: Form E, gliding bushes, flanged, type 1","Outillage de presse — Bagues de guidage — Partie 6: Forme E, bagues
• ISO 9448-7:199117157,IS,,ISO 9448-7:1991,"Tools for pressing — Guide bushes — Part 7: Form F, ball cage bushes, flanged, type 1","Outillage de presse — Bagues de guidage — Partie 7: Forme F, bagu
• ISO 9448-8:199117158,IS,,ISO 9448-8:1991,"Tools for pressing — Guide bushes — Part 8: Form G, gliding bushes, stepped, type 1","Outillage de presse — Bagues de guidage — Partie 8: Forme G, bagues
• ISO 9448-9:199217159,IS,,ISO 9448-9:1992,"Tools for pressing — Guide bushes — Part 9: Form B, ball cage bushes, plain, type 2","Outillage de presse — Bagues de guidage — Partie 9: Forme B, bagues
• ISO 9448-10:199217160,IS,,ISO 9448-10:1992,"Tools for pressing — Guide bushes — Part 10: Form E, gliding bushes, flanged, type 2","Outillage de presse — Bagues de guidage — Partie 10: Forme E, bag
• ISO 9448-11:199217161,IS,,ISO 9448-11:1992,"Tools for pressing — Guide bushes — Part 11: Form F, ball cage bushes, flanged, type 2","Outillage de presse — Bagues de guidage — Partie 11: Forme F, b
• ISO 9449:199017162,IS,,ISO 9449:1990,Tools for moulding — Centring sleeves,Outillage de moulage — Douilles de centrage,1990-11-29,1,['25.120.30'],ISO/TC 29/SC 8,9599,,[44035],"['en','fr']",2
• ISO 9453:199017166,IS,,ISO 9453:1990,Soft solder alloys — Chemical compositions and forms,Alliages de brasage tendre — Composition chimique et formes,1990-11-15,1,['25.160.50'],ISO/TC 44/SC 12,
• ISO 9453:200641923,IS,,ISO 9453:2006,Soft solder alloys — Chemical compositions and forms,Alliages de brasage tendre — Compositions chimiques et formes,2006-09-22,2,['25.160.50'],ISO/TC 44/SC 1
• ISO 9453:201459299,IS,,ISO 9453:2014,Soft solder alloys — Chemical compositions and forms,Alliages de brasage tendre — Compositions chimiques et formes,2014-08-18,3,['25.160.50'],ISO/TC 44/SC 1
• ISO 9454-1:199017167,IS,,ISO 9454-1:1990,"Soft soldering fluxes — Classification and requirements — Part 1: Classification, labelling and packaging","Flux de brasage tendre — Classification et ca
• ISO 9454-2:19982386,IS,,ISO 9454-2:1998,Soft soldering fluxes — Classification and requirements — Part 2: Performance requirements,Flux de brasage tendre — Classification et caractéristiques — Pa
• ISO 9455-1:199017168,IS,,ISO 9455-1:1990,"Soft soldering fluxes — Test methods — Part 1: Determination of non-volatile matter, gravimetric method",Flux de brasage tendre — Méthodes d'essai — Part
• ISO 9455-3:199217170,IS,,ISO 9455-3:1992,"Soft soldering fluxes — Test methods — Part 3: Determination of acid value, potentiometric and visual titration methods",Flux de brasage tendre — Méthode
• ISO 9455-5:199217172,IS,,ISO 9455-5:1992,Soft soldering fluxes — Test methods — Part 5: Copper mirror test,Flux de brasage tendre — Méthodes d'essai — Partie 5: Essai au miroir de cuivre,1992-04-
• ISO 9455-5:201459300,IS,,ISO 9455-5:2014,Soft soldering fluxes — Test methods — Part 5: Copper mirror test,Flux de brasage tendre — Méthodes d'essai — Partie 5: Essai au miroir de cuivre,2014-06-
• ISO 9455-6:199517173,IS,,ISO 9455-6:1995,Soft soldering fluxes — Test methods — Part 6: Determination and detection of halide (excluding fluoride) content,Flux de brasage tendre — Méthodes d'essa
• ISO 9455-9:199317176,IS,,ISO 9455-9:1993,Soft soldering fluxes — Test methods — Part 9: Determination of ammonia content,Flux de brasage tendre — Méthodes d'essai — Partie 9: Dosage de l'ammoniac
• ISO 9455-10:199817177,IS,,ISO 9455-10:1998,"Soft soldering fluxes — Test methods — Part 10: Flux efficacy tests, solder spread method","Flux de brasage tendre — Méthodes d'essai — Partie 10: Essai
• ISO 9455-11:199117178,IS,,ISO 9455-11:1991,Soft soldering fluxes — Test methods — Part 11: Solubility of flux residues,Flux de brasage tendre — Méthodes d'essai — Partie 11: Solubilité des résidus
• ISO 9455-13:199617180,IS,,ISO 9455-13:1996,Soft soldering fluxes — Test methods — Part 13: Determination of flux spattering,Flux de brasage tendre — Méthodes d'essai — Partie 13: Détermination des
• ISO 9455-14:199117181,IS,,ISO 9455-14:1991,Soft soldering fluxes — Test methods — Part 14: Assessment of tackiness of flux residues,Flux de brasage tendre — Méthodes d'essai — Partie 14: Détermina
• ISO 9455-15:19962394,IS,,ISO 9455-15:1996,Soft soldering fluxes — Test methods — Part 15: Copper corrosion test,Flux de brasage tendre — Méthodes d'essai — Partie 15: Essai de corrosion du cuivre,
• ISO 9455-16:199817182,IS,,ISO 9455-16:1998,"Soft soldering fluxes — Test methods — Part 16: Flux efficacy tests, wetting balance method","Flux de brasage tendre — Méthodes d'essai — Partie 16: Ess
• ISO 9455-16:201354323,IS,,ISO 9455-16:2013,"Soft soldering fluxes — Test methods — Part 16: Flux efficacy test, wetting balance method","Flux de brasage tendre — Méthodes d'essai — Partie 16: Essa
• ISO 9455-17:200232830,IS,,ISO 9455-17:2002,Soft soldering fluxes — Test methods — Part 17: Surface insulation resistance comb test and electrochemical migration test of flux residues,Flux de brasa
• ISO 9456:199117183,IS,,ISO 9456:1991,Optics and optical instruments — Ophthalmic optics — Marking of spectacle frames,Optique et instruments d'optique — Optique ophtalmique — Marquage des montu
• ISO 9462:198817191,IS,,ISO 9462:1988,Alpine ski-bindings — Safety requirements and test methods,Fixations de skis alpins — Exigences de sécurité et méthodes d'essai,1988-07-07,1,['97.220.20'],I
• ISO 9462:199317192,IS,,ISO 9462:1993,Alpine ski-bindings — Safety requirements and test methods,Fixations de skis alpins — Prescriptions de sécurité et méthodes d'essai,1993-05-13,2,['97.220.20
• ISO 9462:1993/Amd 1:200224478,IS,Amd,ISO 9462:1993/Amd 1:2002,Alpine ski-bindings — Safety requirements and test methods — Amendment 1,Fixations de skis alpins — Prescriptions de sécurité et méthodes d'es
• ISO 9462:1993/Cor 1:199322600,IS,Cor,ISO 9462:1993/Cor 1:1993,Alpine ski-bindings — Safety requirements and test methods — Technical Corrigendum 1,Fixations de skis alpins — Prescriptions de sécurité et m
• ISO 9462:200638625,IS,,ISO 9462:2006,Alpine ski-bindings — Requirements and test methods,Fixations de skis alpins — Exigences et méthodes d'essai,2006-02-15,3,['97.220.20'],ISO/TC 83/SC 4,9599,
• ISO 9462:2006/Amd 1:200952109,IS,Amd,ISO 9462:2006/Amd 1:2009,Alpine ski-bindings — Requirements and test methods — Amendment 1,Fixations de skis alpins — Exigences et méthodes d'essai — Amendement 1,2009
• ISO 9462:201456106,IS,,ISO 9462:2014,Alpine ski-bindings — Requirements and test methods,Fixations de skis alpins — Exigences et méthodes d'essai,2014-10-16,4,['97.220.20'],ISO/TC 83/SC 4,9599,
• ISO 9463:199017193,IS,,ISO 9463:1990,Nitric acid feed solutions from reprocessing plants — Spectrophotometric determination of plutonium after oxidation to plutonium(VI),Solutions nitriques d'e
• ISO 9463:200944276,IS,,ISO 9463:2009,Nuclear energy — Nuclear fuel technology — Determination of plutonium in nitric acid solutions by spectrophotometry,Énergie nucléaire — Technologie du combu
• ISO 9465:199117195,IS,,ISO 9465:1991,Alpine ski-bindings — Lateral release under impact loading — Test method,Fixations de skis alpins — Déclenchement latéral sous choc — Méthode d'essai,1991-1
• ISO 9467:199317197,IS,,ISO 9467:1993,Forestry machinery — Portable chain-saws and brush-cutters — Exhaust system-caused fire risk,Matériel forestier — Scies à chaîne et débroussailleuses portat
• ISO 9473:198817202,IS,,ISO 9473:1988,Textile machinery and accessories — Strip steel for dents of reeds,Matériel pour l'industrie textile — Fils plats en acier pour dents de peignes,1988-11-24,
• ISO 9477:199217206,IS,,ISO 9477:1992,High strength cast steels for general engineering and structural purposes,Aciers moulés à haute résistance pour construction mécanique et construction métal
• ISO 9477:201559269,IS,,ISO 9477:2015,High strength cast steels for general engineering and structural purposes,Aciers moulés à haute résistance pour construction mécanique et construction métal
• ISO 9488:199917217,IS,,ISO 9488:1999,Solar energy — Vocabulary,Énergie solaire — Vocabulaire,1999-10-14,1,"['01.040.27','27.160']",ISO/TC 180,9599,,"[53735,74269]","['en','fr']",47
• ISO 9502:198917229,IS,,ISO 9502:1989,Metallurgical-grade fluorspar — Determination of silica content — Reduced-molybdosilicate spectrometric method,Spaths fluor utilisables dans l'industrie mét
• ISO 9504:199017232,IS,,ISO 9504:1990,Metallurgical-grade fluorspar — Determination of antimony content — Solvent extraction atomic absorption spectrometric method,Spaths fluor utilisables dans
• ISO 9506-1:200028059,IS,,ISO 9506-1:2000,Industrial automation systems — Manufacturing Message Specification — Part 1: Service definition,Systèmes d'automatisation industrielle — Spécification de
• ISO 9506-2:200028061,IS,,ISO 9506-2:2000,Industrial automation systems — Manufacturing Message Specification — Part 2: Protocol specification,Systèmes d'automatisation industrielle — Spécificatio
• ISO 9507:199017239,IS,,ISO 9507:1990,Iron ores — Determination of total iron content — Titanium(III) chloride reduction methods,Minerais de fer — Dosage du fer total — Méthodes par réduction au
• ISO 9509:198917241,IS,,ISO 9509:1989,Water quality — Method for assessing the inhibition of nitrification of activated sludge micro-organisms by chemicals and waste waters,Qualité de l'eau — Mé
• ISO 9512:199317244,IS,,ISO 9512:1993,Cigarettes — Determination of ventilation — Definitions and measurement principles,Cigarettes — Détermination du taux de ventilation — Définitions et princi
• ISO 9512:200231175,IS,,ISO 9512:2002,Cigarettes — Determination of ventilation — Definitions and measurement principles,Cigarettes — Détermination du taux de ventilation — Définitions et princi
• ISO 9513:198917245,IS,,ISO 9513:1989,Metallic materials — Verification of extensometers used in uniaxial testing,Matériaux métalliques — Vérification des extensomètres utilisés lors d'essais un
• ISO 9513:199926859,IS,,ISO 9513:1999,Metallic materials — Calibration of extensometers used in uniaxial testing,Matériaux métalliques — Étalonnage des extensomètres utilisés lors d'essais uniax
• ISO 9513:1999/Cor 1:200034163,IS,Cor,ISO 9513:1999/Cor 1:2000,Metallic materials — Calibration of extensometers used in uniaxial testing — Technical Corrigendum 1,Matériaux métalliques — Étalonnage des ex
• ISO 9514:199217246,IS,,ISO 9514:1992,Paints and varnishes — Determination of the pot-life of liquid systems — Preparation and conditioning of samples and guidelines for testing,Peintures et ver
• ISO 9514:200537490,IS,,ISO 9514:2005,Paints and varnishes — Determination of the pot life of multicomponent coating systems — Preparation and conditioning of samples and guidelines for testing,
• ISO 9517:198917249,IS,,ISO 9517:1989,Iron ores — Determination of water soluble chloride content — Ion-selective electrode method,Minerais de fer — Dosage des chlorures solubles dans l'eau — Mé
• ISO 9518:199217250,IS,,ISO 9518:1992,Forestry machinery — Portable chain-saws — Kickback test,Matériel forestier — Scies à chaîne portatives — Essai de rebond,1992-06-18,1,['65.060.80'],ISO/TC
• ISO 9518:199824188,IS,,ISO 9518:1998,Forestry machinery — Portable chain-saws — Kickback test,Matériel forestier — Scies à chaîne portatives — Essai de rebond,1998-10-01,2,['65.060.80'],ISO/TC
• ISO 9519:199017252,IS,,ISO 9519:1990,Shipbuilding and marine structures — Rungs for dog-step ladders,Construction navale et structures maritimes — Échelons pour marchepieds,1990-10-11,1,['47.02
• ISO 9523:199017256,IS,,ISO 9523:1990,Touring ski-boots for adults — Interface with ski-binding,Chaussures de ski de randonnée pour adultes — Zones de jonction avec les fixations de skis,1990-06
• ISO 9523:200845842,IS,,ISO 9523:2008,Touring ski-boots for adults — Interface with touring ski-bindings — Requirements and test methods,Chaussures de ski de randonnée pour adultes — Zone de con
• ISO 9523:201563099,IS,,ISO 9523:2015,Touring ski-boots for adults — Interface with touring ski-bindings — Requirements and test methods,Chaussures de ski de randonnée pour adultes — Zone de con
• ISO 9523:201974869,IS,,ISO 9523:2019,Touring ski-boots for adults — Interface with touring ski-bindings — Requirements and test methods,Chaussures de ski de randonnée pour adultes — Zone de con
• ISO 9528:198917260,IS,,ISO 9528:1989,"Aerospace — Standard-weight polytetrafluoroethylene (PTFE) hose assemblies, classification 204 degrees C/21 000 kPa — Procurement specification","Aéronauti
• ISO 9528:1989/Cor 1:199017262,IS,Cor,ISO 9528:1989/Cor 1:1990,"Aerospace — Standard-weight polytetrafluoroethylene (PTFE) hose assemblies, classification 204 degrees C/21 000 kPa — Procurement specificati
• ISO 9528:199417261,IS,,ISO 9528:1994,"Aerospace — Standard-weight polytetrafluoroethylene (PTFE) hose assemblies, classification 204 degrees C/21 000 kPa — Procurement specification","Aéronauti
• ISO 9533:198917269,IS,,ISO 9533:1989,Earth-moving machinery — Machine-mounted forward and reverse audible warning alarm — Sound test method,Engins de terrassement — Avertisseurs sonores de marc
• ISO 9538:199617274,IS,,ISO 9538:1996,Aerospace — Hydraulic tubing joints and fittings — Planar flexure test,Aéronautique et espace — Joints et raccords des tuyauteries hydrauliques — Essai de f
• ISO 9538:201766049,IS,,ISO 9538:2017,Aerospace series — Hydraulic tubing joints and fittings — Planar flexure test,Série aérospatiale — Joints et raccords des tuyauteries hydrauliques — Essai d
• ISO 9539:198817275,IS,,ISO 9539:1988,"Materials for equipment used in gas welding, cutting and allied processes","Matériaux utilisés pour les matériels de soudage aux gaz, coupage et techniques
• ISO 9554:199117300,IS,,ISO 9554:1991,Fibre ropes — General specification,Cordages — Spécifications générales,1991-04-25,1,['59.080.50'],ISO/TC 38,9599,,[36585],"['en','fr']",5
• ISO 9554:200536585,IS,,ISO 9554:2005,Fibre ropes — General specifications,Cordages en fibres — Spécifications générales,2005-01-04,2,['59.080.50'],ISO/TC 38,9599,[17300],[52378],"['en','fr']",1
• ISO 9554:201052378,IS,,ISO 9554:2010,Fibre ropes — General specifications,Cordages en fibres — Spécifications générales,2010-08-02,3,['59.080.50'],ISO/TC 38,9599,[36585],[72077],"['en','fr']",2
• ISO 9555-2:19924641,IS,,ISO 9555-2:1992,Measurement of liquid flow in open channels — Tracer dilution methods for the measurement of steady flow — Part 2: Radioactive tracers,Mesure de débit des
• ISO 9556:198917302,IS,,ISO 9556:1989,Steel and iron — Determination of total carbon content — Infrared absorption method after combustion in an induction furnace,Aciers et fontes — Dosage du ca
• ISO 9562:198917307,IS,,ISO 9562:1989,Water quality — Determination of adsorbable organic halogens (AOX),Qualité de l'eau — Dosage des halogènes des composés organiques adsorbables (AOX),1989-09
• ISO 9562:199828634,IS,,ISO 9562:1998,Water quality — Determination of adsorbable organically bound halogens (AOX),Qualité de l'eau — Dosage des halogènes adsorbables organiquement liés (AOX),19
• ISO 9563:199017308,IS,,ISO 9563:1990,Belt drives — Electrical conductivity of antistatic endless synchronous belts — Characteristics and test method,"Transmissions par courroies — Conductibilit
• ISO 9564-1:199117309,IS,,ISO 9564-1:1991,Banking — Personal Identification Number management and security — Part 1: PIN protection principles and techniques,Banque — Gestion et sécurité du numéro
• ISO 9564-1:200229374,IS,,ISO 9564-1:2002,Banking — Personal Identification Number (PIN) management and security — Part 1: Basic principles and requirements for online PIN handling in ATM and POS
• ISO 9564-1:201154083,IS,,ISO 9564-1:2011,Financial services — Personal Identification Number (PIN) management and security — Part 1: Basic principles and requirements for PINs in card-based syste
• ISO 9564-1:2011/Amd 1:201561447,IS,Amd,ISO 9564-1:2011/Amd 1:2015,Financial services — Personal Identification Number (PIN) management and security — Part 1: Basic principles and requirements for PINs in ca
• ISO 9564-2:199117310,IS,,ISO 9564-2:1991,Banking — Personal Identification Number management and security — Part 2: Approved algorithm(s) for PIN encipherment,Banque — Gestion et sécurité du numé
• ISO 9564-2:200536289,IS,,ISO 9564-2:2005,Banking — Personal Identification Number management and security — Part 2: Approved algorithms for PIN encipherment,Banque — Gestion et sécurité du numéro
• ISO 9564-2:201461448,IS,,ISO 9564-2:2014,Financial services — Personal Identification Number (PIN) management and security — Part 2: Approved algorithms for PIN encipherment,Services financiers —
• ISO 9564-3:200335124,IS,,ISO 9564-3:2003,Banking — Personal Identification Number management and security — Part 3: Requirements for offline PIN handling in ATM and POS systems,Banque — Gestion e
• ISO 9584:199317350,IS,,ISO 9584:1993,Implants for surgery — Non-destructive testing — Radiographic examination of cast metallic surgical implants,Implants chirurgicaux — Essais non destructifs
• ISO 9587:199917353,IS,,ISO 9587:1999,Metallic and other inorganic coatings — Pretreatments of iron or steel to reduce the risk of hydrogen embrittlement,Revêtements métalliques et autres revête
• ISO 9587:200745971,IS,,ISO 9587:2007,Metallic and other inorganic coatings — Pretreatment of iron or steel to reduce the risk of hydrogen embrittlement,Revêtements métalliques et autres revêtem
• ISO 9588:199917354,IS,,ISO 9588:1999,Metallic and other inorganic coatings — Post-coating treatments of iron or steel to reduce the risk of hydrogen embrittlement,Revêtements métalliques et aut
• ISO 9588:200745972,IS,,ISO 9588:2007,Metallic and other inorganic coatings — Post-coating treatments of iron or steel to reduce the risk of hydrogen embrittlement,Revêtements métalliques et aut
• ISO 9591:199217357,IS,,ISO 9591:1992,Corrosion of aluminium alloys — Determination of resistance to stress corrosion cracking,Corrosion des alliages d'aluminium — Détermination de la résistance
• ISO 9597:198917409,IS,,ISO 9597:1989,Cements — Test methods — Determination of setting time and soundness,Ciments — Méthodes d'essai — Détermination du temps de prise et de la stabilité,1989-08
• ISO 9598:198917410,IS,,ISO 9598:1989,Seamless steel tubes for pressure purposes — Full peripheral magnetic transducer/flux leakage testing of ferromagnetic steel tubes for the detection of tran
• ISO 9599:199117411,IS,,ISO 9599:1991,"Copper, lead and zinc sulfide concentrates — Determination of hygroscopic moisture in the analysis sample — Gravimetric method","Concentrés sulfurés de cui
• ISO 9606-1:199417418,IS,,ISO 9606-1:1994,Approval testing of welders — Fusion welding — Part 1: Steels,Qualification des soudeurs — Soudage par fusion — Partie 1: Aciers,1994-08-04,1,['25.160.01'
• ISO 9606-1:1994/Amd 1:199828046,IS,Amd,ISO 9606-1:1994/Amd 1:1998,Approval testing of welders — Fusion welding — Part 1: Steels — Amendment 1,Qualification des soudeurs — Soudage par fusion — Partie 1: Acie
• ISO 9606-2:199417419,IS,,ISO 9606-2:1994,Approval testing of welders — Fusion welding — Part 2: Aluminium and aluminium alloys,Qualification des soudeurs — Soudage par fusion — Partie 2: Aluminiu
• ISO 9606-2:1994/Amd 1:199828060,IS,Amd,ISO 9606-2:1994/Amd 1:1998,Approval testing of welders — Fusion welding — Part 2: Aluminium and aluminium alloys — Amendment 1,Qualification des soudeurs — Soudage par
• ISO 9608:198817421,IS,,ISO 9608:1988,V-belts — Uniformity of belts — Centre distance variation — Specifications and test method,Courroies trapézoïdales — Uniformité des courroies — Variations d
• ISO 9608:199422746,IS,,ISO 9608:1994,V-belts — Uniformity of belts — Test method for determination of centre distance variation,Courroies trapézoïdales — Uniformité des courroies — Méthode d'es
• ISO 9609:199617422,IS,,ISO 9609:1996,"Aerospace — Nuts, hexagonal, plain, reduced height, normal across flats, with MJ threads, classifications: 450 MPa (at ambient temperature) /120 degrees C,
• ISO 9612:199717425,IS,,ISO 9612:1997,Acoustics — Guidelines for the measurement and assessment of exposure to noise in a working environment,Acoustique — Guide pour le mesurage et l'évaluation
• ISO 9612:200941718,IS,,ISO 9612:2009,Acoustics — Determination of occupational noise exposure — Engineering method,Acoustique — Détermination de l'exposition au bruit en milieu de travail — Mét
• ISO 9613-2:199620649,IS,,ISO 9613-2:1996,Acoustics — Attenuation of sound during propagation outdoors — Part 2: General method of calculation,Acoustique — Atténuation du son lors de sa propagatio
• ISO 9618:199617431,IS,,ISO 9618:1996,"Aerospace — Nuts, hexagonal, slotted (castellated), reduced height, normal across flats, with MJ threads, classifications: 450 MPa (at ambient temperature)
• ISO 9622:199917436,IS,,ISO 9622:1999,"Whole milk — Determination of milkfat, protein and lactose content — Guidance on the operation of mid-infrared instruments","Lait entier — Détermination de
• ISO 9624:199717438,IS,,ISO 9624:1997,Thermoplastics pipes for fluids under pressure — Mating dimensions of flange adapters and loose backing flanges,Tubes en matières thermoplastiques destinés
• ISO 9626:199117440,IS,,ISO 9626:1991,Stainless steel needle tubing for the manufacture of medical devices,Tubes d'aiguilles en acier inoxydable pour la fabrication de matériel médical,1991-08-2
• ISO 9626:1991/Amd 1:200130434,IS,Amd,ISO 9626:1991/Amd 1:2001,Stainless steel needle tubing for the manufacture of medical devices — Amendment 1,Tubes d'aiguilles en acier inoxydable pour la fabrication d
• ISO 9628:199217442,IS,,ISO 9628:1992,Rolling bearings — Insert bearings and eccentric locking collars,Roulements — Roulements 'insert' et bagues de blocage excentriques,1992-12-30,1,['21.100.20
• ISO 9628:200640244,IS,,ISO 9628:2006,Rolling bearings — Insert bearings and eccentric locking collars — Boundary dimensions and tolerances,Roulements — Roulements 'insert' et bagues de blocage
• ISO 9628:2006/Amd 1:201151591,IS,Amd,ISO 9628:2006/Amd 1:2011,Rolling bearings — Insert bearings and eccentric locking collars — Boundary dimensions and tolerances — Amendment 1: Diameter series 3,Rouleme
• ISO 9631:199117445,IS,,ISO 9631:1991,Rubber seals — Joint rings for hot water supply pipelines up to 110 degrees C — Specification for the material,Joints étanches en caoutchouc — Garnitures d'
• ISO 9631:200337163,IS,,ISO 9631:2003,Rubber seals — Joint rings for pipelines for hot-water supply up to 110 degrees C — Specification for the material,Joints étanches en caoutchouc — Garniture
• ISO 9633:199217447,IS,,ISO 9633:1992,Cycle chains — Characteristics and test methods,Chaînes pour cycles — Caractéristiques et méthodes de contrôle,1992-07-09,1,['43.150'],ISO/TC 100,9599,,[235
• ISO 9635-1:200639764,IS,,ISO 9635-1:2006,Agricultural irrigation equipment — Irrigation valves — Part 1: General requirements,Matériel agricole d'irrigation — Vannes d'irrigation — Partie 1: Exig
• ISO 9635-2:200641119,IS,,ISO 9635-2:2006,Agricultural irrigation equipment — Irrigation valves — Part 2: Isolating valves,Matériel agricole d'irrigation — Vannes d'irrigation — Partie 2: Vannes d
• ISO 9635-3:200641123,IS,,ISO 9635-3:2006,Agricultural irrigation equipment — Irrigation valves — Part 3: Check valves,Matériel agricole d'irrigation — Vannes d'irrigation — Partie 3: Clapets anti
• ISO 9635-4:200641121,IS,,ISO 9635-4:2006,Agricultural irrigation equipment — Irrigation valves — Part 4: Air valves,Matériel agricole d'irrigation — Vannes d'irrigation — Partie 4: Vannes de purg
• ISO 9635-5:200641122,IS,,ISO 9635-5:2006,Agricultural irrigation equipment — Irrigation valves — Part 5: Control valves,Matériel agricole d'irrigation — Vannes d'irrigation — Partie 5: Vannes de
• ISO 9635:199017449,IS,,ISO 9635:1990,Irrigation equipment — Hydraulically operated irrigation valves,Matériel d'irrigation — Vannes à commande hydraulique,1990-11-22,1,['65.060.35'],ISO/TC 23/S
• ISO 9642:199317469,IS,,ISO 9642:1993,"Cinematography — Time and control code for 24, 25 and 30 frames per second motion-picture systems — Specifications","Cinématographie — Code de chronométrag
• ISO 9644:199317470,IS,,ISO 9644:1993,Agricultural irrigation equipment — Pressure losses in irrigation valves — Test method,Matériel agricole d'irrigation — Pertes de pression dans les vannes d
• ISO 9644:1993/Amd 1:199826519,IS,Amd,ISO 9644:1993/Amd 1:1998,Agricultural irrigation equipment — Pressure losses in irrigation valves — Test method — Amendment 1,Matériel agricole d'irrigation — Pertes d
• ISO 9644:200843992,IS,,ISO 9644:2008,Agricultural irrigation equipment — Pressure losses in irrigation valves — Test method,Matériel agricole d'irrigation — Pertes de pression dans les vannes d
• ISO 9647:198917486,IS,,ISO 9647:1989,Steel and iron — Determination of vanadium content — Flame atomic absorption spectrometric method,Aciers et fontes — Dosage du vanadium — Méthode par spectr
• ISO 9649:199017488,IS,,ISO 9649:1990,Metallic materials — Wire — Reverse torsion test,Matériaux métalliques — Fils — Essai de torsion alternée,1990-02-22,1,['77.040.10'],ISO/TC 164/SC 2,9599,,[
• ISO 9649:201661814,IS,,ISO 9649:2016,Metallic materials — Wire — Reverse torsion test,Matériaux métalliques — Fils — Essai de torsion alternée,2016-05-03,2,['77.040.10'],ISO/TC 164/SC 2,9599,[1
• ISO 9650-1:200537478,IS,,ISO 9650-1:2005,Small craft — Inflatable liferafts — Part 1: Type I,Petits navires — Radeaux de survie gonflables — Partie 1: Type I,2005-03-02,1,['47.080'],ISO/TC 188,95
• ISO 9650-2:200537479,IS,,ISO 9650-2:2005,Small craft — Inflatable liferafts — Part 2: Type II,Petits navires — Radeaux de survie gonflables — Partie 2: Type II,2005-03-02,1,['47.080'],ISO/TC 188,
• ISO 9650-3:200537480,IS,,ISO 9650-3:2005,Small craft — Inflatable liferafts — Part 3: Material,Petits navires — Radeaux de survie gonflables — Partie 3: Matériaux,2005-03-02,1,['47.080'],ISO/TC 1
• ISO 9653:199117498,IS,,ISO 9653:1991,Adhesives — Test method for shear impact strength of adhesive bonds,Adhésifs — Essai de tenue au choc par cisaillement du joint adhésif,1991-12-12,1,['83.18
• ISO 9654:198917499,IS,,ISO 9654:1989,Pliers and nippers for electronics — Single-purpose nippers — Cutting nippers,Pinces pour l'électronique — Pinces unifonction — Pinces coupantes,1989-12-07,
• ISO 9655:198917500,IS,,ISO 9655:1989,Pliers and nippers for electronics — Single-purpose pliers — Pliers for gripping and manipulating,Pinces pour l'électronique — Pinces unifonction — Pinces d
• ISO 9656:198917501,IS,,ISO 9656:1989,Pliers and nippers for electronics — Test methods,Pinces pour l'électronique — Méthodes d'essai,1989-11-16,1,['25.140.30'],ISO/TC 29/SC 10,9599,,[33650],"['
• ISO 9657:198917502,IS,,ISO 9657:1989,Pliers and nippers for electronics — General technical requirements,Pinces pour l'électronique — Spécifications techniques générales,1989-12-14,1,['25.140.3
• ISO 9658:199017503,IS,,ISO 9658:1990,Steel — Determination of aluminium content — Flame atomic absorption spectrometric method,Aciers — Dosage de l'aluminium — Méthode par spectrométrie d'absor
• ISO 9660:198817505,IS,,ISO 9660:1988,Information processing — Volume and file structure of CD-ROM for information interchange,Traitement de l'information — Structure de volume et de fichier des
• ISO 9660:1988/Amd 1:201361625,IS,Amd,ISO 9660:1988/Amd 1:2013,Information processing — Volume and file structure of CD-ROM for information interchange — Amendment 1,Traitement de l'information — Structure
• ISO 9660:1988/Amd 2:202078259,IS,Amd,ISO 9660:1988/Amd 2:2020,Information processing — Volume and file structure of CD-ROM for information interchange — Amendment 2,Traitement de l'information — Structure
• ISO 9661:198817506,IS,,ISO 9661:1988,"Information processing — Data interchange on 12,7 mm (0.5 in) magnetic tape cartridges — 18 tracks, 1 491 data bytes per millimetre (37 871 data bytes per
• ISO 9661:1988/Cor 1:199017507,IS,Cor,ISO 9661:1988/Cor 1:1990,"Information processing — Data interchange on 12,7 mm (0.5 in) magnetic tape cartridges — 18 tracks, 1 491 data bytes per millimetre (37 871 d
• ISO 9661:1988/Cor 2:199220547,IS,Cor,ISO 9661:1988/Cor 2:1992,"Information processing — Data interchange on 12,7 mm (0.5 in) magnetic tape cartridges — 18 tracks, 1 491 data bytes per millimetre (37 871 d
• ISO 9665:199317511,IS,,ISO 9665:1993,Adhesives — Animal glues — Methods for sampling and testing,Adhésifs — Colles d'origine animale — Méthodes d'échantillonnage et d'essai,1993-03-04,1,['83.18
• ISO 9667:199817514,IS,,ISO 9667:1998,Aircraft ground support equipment — Tow bars,Équipement au sol pour aéronefs — Barres de tractage,1998-12-17,1,['49.100'],ISO/TC 20/SC 9,9599,,[66248],"['en
• ISO 9667:201666248,IS,,ISO 9667:2016,Aircraft ground support equipment — Tow bars,Équipement au sol pour aéronefs — Barres de tractage,2016-01-07,2,['49.100'],ISO/TC 20/SC 9,9599,[17514],[71493
• ISO 9668:199017515,IS,,ISO 9668:1990,Pulps — Determination of magnesium content — Flame atomic absorption spectrometric method,Pâtes — Détermination de la teneur en magnésium — Méthode par spec
• ISO 9680:199317535,IS,,ISO 9680:1993,Dental operating light,Appareil d'éclairage opératoire dentaire,1993-10-07,1,['11.060.20'],ISO/TC 106/SC 6,9599,,"[23004,39276]","['en','fr']",11
• ISO 9680:1993/Cor 1:199525195,IS,Cor,ISO 9680:1993/Cor 1:1995,Dental operating light — Technical Corrigendum 1,Appareil d'éclairage opératoire dentaire — Rectificatif technique 1,1995-03-02,1,['11.060.20'
• ISO 9680:200739276,IS,,ISO 9680:2007,Dentistry — Operating lights,Art dentaire — Appareils d'éclairage,2007-06-14,2,['11.060.20'],ISO/TC 106/SC 6,9599,"[25195,17535]",[57944],"['en','fr']",18
• ISO 9680:201457944,IS,,ISO 9680:2014,Dentistry — Operating lights,Médecine bucco-dentaire — Appareils d'éclairage,2014-10-15,3,['11.060.20'],ISO/TC 106/SC 6,9599,[39276],[74496],"['en','fr']",1
• ISO 9680:202174496,IS,,ISO 9680:2021,Dentistry — Operating lights,Médecine bucco-dentaire — Luminaires opératoires,2021-11-12,4,['11.060.20'],ISO/TC 106/SC 6,9599,[57944],[85762],"['en','fr']",
• ISO 9682-1:199117537,IS,,ISO 9682-1:1991,Iron ores — Determination of manganese content — Part 1: Flame atomic absorption spectrometric method,Minerais de fer — Dosage du manganèse — Partie 1: Mé
• ISO 9683:199117538,IS,,ISO 9683:1991,Iron ores — Determination of vanadium content — BPHA spectrophotometric method,Minerais de fer — Dosage du vanadium — Méthode spectrophotométrique à la BPHA
• ISO 9684:199117539,IS,,ISO 9684:1991,Iron ores — Determination of vanadium content — Flame atomic absorption spectrometric methods,Minerais de fer — Détermination du vanadium — Méthodes par spe
• ISO 9686:199217541,IS,,ISO 9686:1992,Direct reduced iron — Determination of carbon and/or sulfur content — High frequency combustion method with infrared measurement,Minerais de fer préréduits
• ISO 9686:200639728,IS,,ISO 9686:2006,Direct reduced iron — Determination of carbon and/or sulfur — High-frequency combustion method with infrared measurement,Minerais de fer préréduits — Dosage
• ISO 9687:199317542,IS,,ISO 9687:1993,Dental equipment — Graphical symbols,Matériel dentaire — Symboles graphiques,1993-02-04,1,"['01.080.20','11.060.20']",ISO/TC 106/SC 6,9599,,[59876],"['en','
• ISO 9689:199017544,IS,,ISO 9689:1990,Raw optical glass — Resistance to attack by aqueous alkaline phosphate-containing detergent solutions at 50 degrees C — Testing and classification,Verre d'o
• ISO 9692-1:200333254,IS,,ISO 9692-1:2003,"Welding and allied processes — Recommendations for joint preparation — Part 1: Manual metal-arc welding, gas-shielded metal-arc welding, gas welding, TI
• ISO 9692-2:199821036,IS,,ISO 9692-2:1998,Welding and allied processes — Joint preparation — Part 2: Submerged arc welding of steels,Soudage et techniques connexes — Préparation de joints — Partie
• ISO 9692-3:200027208,IS,,ISO 9692-3:2000,Welding and allied processes — Recommendations for joint preparation — Part 3: Metal inert gas welding and tungsten inert gas welding of aluminium and its
• ISO 9692:199217547,IS,,ISO 9692:1992,"Metal-arc welding with covered electrode, gas-shielded metal-arc welding and gas welding — Joint preparations for steel","Soudage à l'arc avec électrode en

← records 10,801–11,200 · All of Withdrawn and superseded ISO standards · records 11,601 on →