Records 16,401–16,800 — Withdrawn and superseded ISO standards

Records 16,401 to 16,800 of 24,640. Each links to its own page, which carries the source URL and the quoted line that states the value.

• ISO 16001:200839664,IS,,ISO 16001:2008,Earth-moving machinery — Hazard detection systems and visual aids — Performance requirements and tests,Engins de terrassement — Dispositifs de détection de
• ISO 16004:200541107,IS,,ISO 16004:2005,Aircraft ground equipment — Passenger boarding bridge or transfer vehicle — Requirements for interface with aircraft doors,Matériel au sol pour aéronefs —
• ISO 16010:200540110,IS,,ISO 16010:2005,Elastomeric seals — Material requirements for seals used in pipes and fittings carrying gaseous fuels and hydrocarbon fluids,Garnitures d'étanchéité en éla
• ISO 16012:200428687,IS,,ISO 16012:2004,Plastics — Determination of linear dimensions of test specimens,Plastiques — Détermination des dimensions linéaires des éprouvettes,2004-07-08,1,['83.080.0
• ISO 16012:2004/Cor 1:200543553,IS,Cor,ISO 16012:2004/Cor 1:2005,Plastics — Determination of linear dimensions of test specimens — Technical Corrigendum 1,Plastiques — Détermination des dimensions linéaires
• ISO 16014-1:200328935,IS,,ISO 16014-1:2003,Plastics — Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography — Part 1: General prin
• ISO 16014-1:2003/Cor 1:200543283,IS,Cor,ISO 16014-1:2003/Cor 1:2005,Plastics — Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography — Part 1
• ISO 16014-1:201252892,IS,,ISO 16014-1:2012,Plastics — Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography — Part 1: General prin
• ISO 16014-2:200333332,IS,,ISO 16014-2:2003,Plastics — Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography — Part 2: Universal ca
• ISO 16014-2:201252893,IS,,ISO 16014-2:2012,Plastics — Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography — Part 2: Universal ca
• ISO 16014-3:200329803,IS,,ISO 16014-3:2003,Plastics — Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography — Part 3: Low-temperat
• ISO 16014-3:201252894,IS,,ISO 16014-3:2012,Plastics — Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography — Part 3: Low-temperat
• ISO 16014-4:200329802,IS,,ISO 16014-4:2003,Plastics — Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography — Part 4: High-tempera
• ISO 16014-4:201252895,IS,,ISO 16014-4:2012,Plastics — Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography — Part 4: High-tempera
• ISO 16014-5:201252335,IS,,ISO 16014-5:2012,Plastics — Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography — Part 5: Method using
• ISO 16016:200028850,IS,,ISO 16016:2000,Technical product documentation — Protection notices for restricting the use of documents and products,Documentation technique de produits — Symboles et cl
• ISO 16021:200029832,IS,,ISO 16021:2000,Urine-absorbing aids — Basic principles for evaluation of single-use adult-incontinence-absorbing aids from the perspective of users and caregivers,Aides p
• ISO 16028:199929852,IS,,ISO 16028:1999,"Hydraulic fluid power — Flush-face type, quick-action couplings for use at pressures of 20 MPa (200 bar) to 31,5 MPa (315 bar) — Specifications","Transmis
• ISO 16028:1999/Amd 1:200641713,IS,Amd,ISO 16028:1999/Amd 1:2006,"Hydraulic fluid power — Flush-face type, quick-action couplings for use at pressures of 20 MPa (200 bar) to 31,5 MPa (315 bar) — Specificati
• ISO 16030:200129554,IS,,ISO 16030:2001,Pneumatic fluid power — Connections — Ports and stud ends,Transmissions pneumatiques — Raccordements — Orifices et éléments mâles,2001-12-20,1,['23.100.40'
• ISO 16030:2001/Amd 1:200540208,IS,Amd,ISO 16030:2001/Amd 1:2005,Pneumatic fluid power — Connections — Ports and stud ends — Amendment 1,Transmissions pneumatiques — Raccordements — Orifices et éléments mâl
• ISO 16032:200429867,IS,,ISO 16032:2004,Acoustics — Measurement of sound pressure level from service equipment in buildings — Engineering method,Acoustique — Mesurage du niveau de pression acoust
• ISO 16038:200537078,IS,,ISO 16038:2005,Rubber condoms — Guidance on the use of ISO 4074 in the quality management of natural rubber latex condoms,Préservatifs en caoutchouc — Directives sur l'ut
• ISO 16049-1:200130033,IS,,ISO 16049-1:2001,Air cargo equipment — Restraint straps — Part 1: Design criteria and testing methods,Équipement pour le fret aérien — Sangles d'arrimage — Partie 1: Crit
• ISO 16049-1:201353817,IS,,ISO 16049-1:2013,Air cargo equipment — Restraint straps — Part 1: Design criteria and testing methods,Équipement pour le fret aérien — Sangles d'arrimage — Partie 1: Crit
• ISO 16049-2:200533731,IS,,ISO 16049-2:2005,Air cargo equipment — Restraint straps — Part 2: Utilization guidelines and lashing calculations,Équipement de fret aérien — Sangles d'arrimage — Partie
• ISO 16049-2:201354922,IS,,ISO 16049-2:2013,Air cargo equipment — Restraint straps — Part 2: Utilization guidelines and lashing calculations,Équipement de fret aérien — Sangles d'arrimage — Partie
• ISO 16053:200429494,IS,,ISO 16053:2004,Paints and varnishes — Coating materials and coating systems for exterior wood — Natural weathering test,Peintures et vernis — Produits de peinture et syst
• ISO 16053:201050492,IS,,ISO 16053:2010,Paints and varnishes — Coating materials and coating systems for exterior wood — Natural weathering test,Peintures et vernis — Produits de peinture et syst
• ISO 16053:201870859,IS,,ISO 16053:2018,Paints and varnishes — Coating materials and coating systems for exterior wood — Natural weathering test,Peintures et vernis — Produits de peinture et syst
• ISO 16054:200030045,IS,,ISO 16054:2000,Implants for surgery — Minimum data sets for surgical implants,Implants chirurgicaux — Ensembles minimaux de données relatives aux implants chirurgicaux,20
• ISO 16055:200329553,IS,,ISO 16055:2003,Tobacco and tobacco products — Monitor test piece — Requirements and use,Tabac et produits du tabac — Éprouvette de contrôle — Exigences et utilisation,200
• ISO 16055:201256766,IS,,ISO 16055:2012,Tobacco and tobacco products — Monitor test piece — Requirements and use,Tabac et produits du tabac — Éprouvette de contrôle — Exigences et utilisation,201
• ISO 16055:201975604,IS,,ISO 16055:2019,Tobacco and tobacco products — Monitor test piece — Requirements and use,Tabac et produits du tabac — Éprouvette de contrôle — Exigences et utilisation,201
• ISO 16061:200030842,IS,,ISO 16061:2000,Instrumentation for use in association with non-active surgical implants — General requirements,Instrumentation à utiliser en association avec les implants
• ISO 16061:200844996,IS,,ISO 16061:2008,Instrumentation for use in association with non-active surgical implants — General requirements,Instrumentation à utiliser en association avec les implants
• ISO 16061:201562113,IS,,ISO 16061:2015,Instrumentation for use in association with non-active surgical implants — General requirements,Instrumentation à utiliser en association avec les implants
• ISO 16065-1:200130113,IS,,ISO 16065-1:2001,Pulps — Determination of fibre length by automated optical analysis — Part 1: Polarized light method,Pâtes — Détermination de la longueur de fibre par an
• ISO 16065-2:200732892,IS,,ISO 16065-2:2007,Pulps — Determination of fibre length by automated optical analysis — Part 2: Unpolarized light method,Pâtes — Détermination de la longueur de fibre par
• ISO 16069:200430124,IS,,ISO 16069:2004,Graphical symbols — Safety signs — Safety way guidance systems (SWGS),Symboles graphiques — Signaux de sécurité — Systèmes de guidage pour cheminement d'év
• ISO 16070:200130856,IS,,ISO 16070:2001,Petroleum and natural gas industries — Downhole equipment — Lock mandrels and landing nipples,Industries du pétrole et du gaz naturel — Équipement de fond
• ISO 16073:201137696,IS,,ISO 16073:2011,Wildland firefighting personal protective equipment — Requirements and test methods,Équipement de protection individuelle pour la lutte contre les feux d'e
• ISO 16075-1:201562756,IS,,ISO 16075-1:2015,Guidelines for treated wastewater use for irrigation projects — Part 1: The basis of a reuse project for irrigation,Lignes directrices pour l'utilisation
• ISO 16075-2:201562758,IS,,ISO 16075-2:2015,Guidelines for treated wastewater use for irrigation projects — Part 2: Development of the project,Lignes directrices pour l'utilisation des eaux usées t
• ISO 16075-3:201562759,IS,,ISO 16075-3:2015,Guidelines for treated wastewater use for irrigation projects — Part 3: Components of a reuse project for irrigation,Lignes directrices pour l'utilisatio
• ISO 16075-4:201662760,IS,,ISO 16075-4:2016,Guidelines for treated wastewater use for irrigation projects — Part 4: Monitoring,Lignes directrices pour l'utilisation des eaux usées traitées en irrig
• ISO 16079-1:201755634,IS,,ISO 16079-1:2017,Condition monitoring and diagnostics of wind turbines — Part 1: General guidelines,Surveillance et diagnostic d'état des éoliennes de production d'électr
• ISO 16089:201555665,IS,,ISO 16089:2015,Machine tools — Safety — Stationary grinding machines,Machines-outils — Sécurité — Machines à meuler fixes,2015-11-16,1,['25.080.01'],ISO/TC 39/SC 10,9599,
• ISO 16090-1:201755666,IS,,ISO 16090-1:2017,"Machine tools safety — Machining centres, Milling machines, Transfer machines — Part 1: Safety requirements","Sécurité des machines-outils — Centres d'u
• ISO 16091:200230863,IS,,ISO 16091:2002,Space systems — Integrated logistic support,Systèmes spatiaux — Soutien logistique intégré,2002-11-27,1,['49.140'],ISO/TC 20/SC 14,9599,,[72937],"['en','fr
• ISO 16100-1:200235156,IS,,ISO 16100-1:2002,Industrial automation systems and integration — Manufacturing software capability profiling for interoperability — Part 1: Framework,Systèmes d'automatis
• ISO 16100-6:201155213,IS,,ISO 16100-6:2011,Industrial automation systems and integration — Manufacturing software capability profiling for interoperability — Part 6: Interface services and protoco
• ISO 16101:200430131,IS,,ISO 16101:2004,Packaging — Transport packaging for dangerous goods — Plastics compatibility testing,Emballages — Emballages pour le transport des marchandises dangereuses
• ISO 16104:200330134,IS,,ISO 16104:2003,Packaging — Transport packaging for dangerous goods — Test methods,Emballage — Emballage de transport pour marchandises dangereuses — Méthodes d'essai,2003
• ISO 16106:200639762,IS,,ISO 16106:2006,"Packaging — Transport packages for dangerous goods — Dangerous goods packagings, intermediate bulk containers (IBCs) and large packagings — Guidelines for
• ISO 16107:199930138,IS,,ISO 16107:1999,Workplace atmospheres — Protocol for evaluating the performance of diffusive samplers,Air des lieux de travail — Protocole pour l'évaluation de la performa
• ISO 16111:200850366,IS,,ISO 16111:2008,Transportable gas storage devices — Hydrogen absorbed in reversible metal hydride,Appareils de stockage de gaz transportables — Hydrogène absorbé dans un h
• ISO 16112:200637724,IS,,ISO 16112:2006,Compacted (vermicular) graphite cast irons — Classification,Fontes à graphite vermiculaire (compacté) — Classification,2006-08-07,1,['77.080.10'],ISO/TC 25
• ISO 16120-1:200130150,IS,,ISO 16120-1:2001,Non-alloy steel wire rod for conversion to wire — Part 1: General requirements,Fil-machine en acier non allié destiné à la fabrication de fils — Partie 1
• ISO 16120-1:201145631,IS,,ISO 16120-1:2011,Non-alloy steel wire rod for conversion to wire — Part 1: General requirements,Fil-machine en acier non allié destiné à la fabrication de fils — Partie 1
• ISO 16120-2:200130151,IS,,ISO 16120-2:2001,Non-alloy steel wire rod for conversion to wire — Part 2: Specific requirements for general purpose wire rod,Fil-machine en acier non allié destiné à la
• ISO 16120-2:201145632,IS,,ISO 16120-2:2011,Non-alloy steel wire rod for conversion to wire — Part 2: Specific requirements for general-purpose wire rod,Fil-machine en acier non allié destiné à la
• ISO 16120-3:200130152,IS,,ISO 16120-3:2001,"Non-alloy steel wire rod for conversion to wire — Part 3: Specific requirements for rimmed and rimmed-substitute, low-carbon steel wire rod",Fil-machine
• ISO 16120-4:200130153,IS,,ISO 16120-4:2001,Non-alloy steel wire rod for conversion to wire — Part 4: Specific requirements for wire rod for special applications,Fil-machine en acier non allié dest
• ISO 16120-4:201145634,IS,,ISO 16120-4:2011,Non-alloy steel wire rod for conversion to wire — Part 4: Specific requirements for wire rod for special applications,Fil-machine en acier non allié dest
• ISO 16121-1:200539118,IS,,ISO 16121-1:2005,"Road vehicles — Ergonomic requirements for the driver's workplace in line-service buses — Part 1: General description, basic requirements","Véhicules ro
• ISO 16121-2:200539119,IS,,ISO 16121-2:2005,Road vehicles — Ergonomic requirements for the driver's workplace in line-service buses — Part 2: Visibility,Véhicules routiers — Exigences ergonomiques
• ISO 16121-3:200539120,IS,,ISO 16121-3:2005,Road vehicles — Ergonomic requirements for the driver's workplace in line-service buses — Part 3: Information devices and controls,Véhicules routiers — E
• ISO 16121-4:200539121,IS,,ISO 16121-4:2005,Road vehicles — Ergonomic requirements for the driver's workplace in line-service buses — Part 4: Cabin environment,Véhicules routiers — Exigences ergono
• ISO 16122-1:201556721,IS,,ISO 16122-1:2015,Agricultural and forestry machinery — Inspection of sprayers in use — Part 1: General,Matériel agricole et forestier — Contrôle des pulvérisateurs en ser
• ISO 16122-2:201555708,IS,,ISO 16122-2:2015,Agricultural and forestry machinery — Inspection of sprayers in use — Part 2: Horizontal boom sprayers,Matériel agricole et forestier — Contrôle des pulv
• ISO 16122-3:201555709,IS,,ISO 16122-3:2015,Agricultural and forestry machinery — Inspection of sprayers in use — Part 3: Sprayers for bush and tree crops,Matériel agricole et forestier — Contrôle
• ISO 16122-4:201557415,IS,,ISO 16122-4:2015,Agricultural and forestry machines — Inspection of sprayers in use — Part 4: Fixed and semi-mobile sprayers,Matériel agricole et forestier — Contrôle des
• ISO 16124:200436074,IS,,ISO 16124:2004,Steel wire rod — Dimensions and tolerances,Fil machine en acier — Dimensions et tolérances,2004-09-13,1,['77.140.65'],ISO/TC 17/SC 17,9599,[15646],[59563],
• ISO 16126:201455720,IS,,ISO 16126:2014,Space systems — Assessment of survivability of unmanned spacecraft against space debris and meteoroid impacts to ensure successful post-mission disposal,Sy
• ISO 16127:201455721,IS,,ISO 16127:2014,Space systems — Prevention of break-up of unmanned spacecraft,Systèmes spatiaux — Prévention de l'éclatement des navettes sans pilote,2014-02-13,1,['49.140
• ISO 16129:201255727,IS,,ISO 16129:2012,Surface chemical analysis — X-ray photoelectron spectroscopy — Procedures for assessing the day-to-day performance of an X-ray photoelectron spectrometer,A
• ISO 16132:200429385,IS,,ISO 16132:2004,Ductile iron pipes and fittings — Seal coats for cement mortar linings,Tuyaux et raccords en fonte ductile — Seal coats pour les revêtements de mortier de
• ISO 16132:201665495,IS,,ISO 16132:2016,Ductile iron pipes and fittings — Seal coats for cement mortar linings,Tuyaux et raccords en fonte ductile — Seal coats pour les revêtements de mortier de
• ISO 16133:200430868,IS,,ISO 16133:2004,Soil quality — Guidance on the establishment and maintenance of monitoring programmes,Qualité du sol — Lignes directrices pour l'établissement et l'entreti
• ISO 16134:200640651,IS,,ISO 16134:2006,Earthquake- and subsidence-resistant design of ductile iron pipelines,Conceptions de canalisations en fonte ductile résistant aux tremblements de terre et
• ISO 16140:200330158,IS,,ISO 16140:2003,Microbiology of food and animal feeding stuffs — Protocol for the validation of alternative methods,Microbiologie des aliments — Protocole pour la validati
• ISO 16140:2003/Amd 1:201153526,IS,Amd,ISO 16140:2003/Amd 1:2011,Microbiology of food and animal feeding stuffs — Protocol for the validation of alternative methods — Amendment 1,Microbiologie des aliments
• ISO 16143-1:200430166,IS,,ISO 16143-1:2004,Stainless steels for general purposes — Part 1: Flat products,Aciers inoxydables pour usage général — Partie 1: Produits plats,2004-04-30,1,['77.140.20']
• ISO 16143-2:200429492,IS,,ISO 16143-2:2004,"Stainless steels for general purposes — Part 2: Semi-finished products, bars, rods and sections","Aciers inoxydables pour usage général — Partie 2: Demi
• ISO 16143-3:200531833,IS,,ISO 16143-3:2005,Stainless steels for general purposes — Part 3: Wire,Aciers inoxydables pour usage général — Partie 3: Fil,2005-04-06,1,"['77.140.65','77.140.20']",ISO/T
• ISO 16147:200230878,IS,,ISO 16147:2002,Small craft — Inboard diesel engines — Engine-mounted fuel and electrical components,Petits navires — Moteurs intérieurs diesels — Éléments des circuits d'
• ISO 16147:2002/Amd 1:201361253,IS,Amd,ISO 16147:2002/Amd 1:2013,Small craft — Inboard diesel engines — Engine-mounted fuel and electrical components — Amendment 1,Petits navires — Moteurs intérieurs diesel
• ISO 16147:201870391,IS,,ISO 16147:2018,"Small craft — Inboard diesel engines — Engine-mounted fuel, oil and electrical components","Petits navires — Moteurs intérieurs diesels — Éléments des cir
• ISO 16148:200632123,IS,,ISO 16148:2006,Gas cylinders — Refillable seamless steel gas cylinders — Acoustic emission testing (AT) for periodic inspection,Bouteilles à gaz — Bouteilles à gaz rechar
• ISO 16151:200532126,IS,,ISO 16151:2005,"Corrosion of metals and alloys — Accelerated cyclic tests with exposure to acidified salt spray, 'dry' and 'wet' conditions","Corrosion des métaux et all
• ISO 16152:200532127,IS,,ISO 16152:2005,Plastics — Determination of xylene-soluble matter in polypropylene,Plastiques — Détermination des matières présentes dans le polypropylène solubles dans le
• ISO 16159:201255740,IS,,ISO 16159:2012,"Space systems — Launch pad and integration site — Facility, system and equipment failure analysis","Systèmes spatiaux — Aire de lancement et site d'intégr
• ISO 16160:200029477,IS,,ISO 16160:2000,Continuously hot-rolled steel sheet products — Dimensional and shape tolerances,Tôles en acier laminées à chaud en continu — Tolérances sur dimensions et
• ISO 16160:200537197,IS,,ISO 16160:2005,Continuously hot-rolled steel sheet products — Dimensional and shape tolerances,Tôles en acier laminées à chaud en continu — Tolérances sur dimensions et
• ISO 16160:201153485,IS,,ISO 16160:2011,Continuously hot-rolled steel sheet products — Dimensional and shape tolerances,Tôles en acier laminées à chaud en continu — Tolérances sur dimensions et f
• ISO 16162:200029478,IS,,ISO 16162:2000,Continuously cold-rolled steel sheet products — Dimensional and shape tolerances,Tôles en acier laminées à froid en continu — Tolérances sur dimensions et
• ISO 16162:200537198,IS,,ISO 16162:2005,Continuously cold-rolled steel sheet products — Dimensional and shape tolerances,Tôles en acier laminées à froid en continu — Tolérances sur dimensions et
• ISO 16162:201053487,IS,,ISO 16162:2010,Continuously cold-rolled steel sheet products — Dimensional and shape tolerances,Tôles en acier laminées à froid en continu — Tolérances sur dimensions et
• ISO 16163:200029479,IS,,ISO 16163:2000,Continuously hot-dipped coated steel sheet products — Dimensional and shape tolerances,Tôles en acier revêtues en continu par immersion à chaud — Tolérance
• ISO 16163:200537199,IS,,ISO 16163:2005,Continuously hot-dipped coated steel sheet products — Dimensional and shape tolerances,Tôles en acier revêtues en continu par immersion à chaud — Tolérance
• ISO 16163:201053488,IS,,ISO 16163:2010,Continuously hot-dipped coated steel sheet products — Dimensional and shape tolerances,Tôles en acier revêtues en continu par immersion à chaud — Tolérance
• ISO 16164:201555741,IS,,ISO 16164:2015,Space systems — Disposal of satellites operating in or crossing Low Earth Orbit,Systèmes spatiaux — Disposition des satellites opérant dans ou à cheval de
• ISO 16165:200130880,IS,,ISO 16165:2001,Ships and marine technology — Marine environment protection — Terminology relating to oil spill response,Navires et technologie maritime — Protection de l'
• ISO 16165:201359294,IS,,ISO 16165:2013,Ships and marine technology — Marine environment protection — Terminology relating to oil spill response,Navires et technologie maritime — Protection de l'
• ISO 16172:200637773,IS,,ISO 16172:2006,Continuous hot-dip metallic-coated steel sheet for corrugated steel pipe,Tôles en acier revêtues en continu par immersion à chaud pour tuyaux d'acier strié
• ISO 16172:201155771,IS,,ISO 16172:2011,Continuous hot-dip metallic-coated steel sheet for corrugated steel pipe,Tôles en acier revêtues en continu par immersion à chaud pour tuyaux d'acier strié
• ISO 16175-1:201055790,IS,,ISO 16175-1:2010,Information and documentation — Principles and functional requirements for records in electronic office environments — Part 1: Overview and statement of
• ISO 16175-2:201155791,IS,,ISO 16175-2:2011,Information and documentation — Principles and functional requirements for records in electronic office environments — Part 2: Guidelines and functional
• ISO 16175-3:201055792,IS,,ISO 16175-3:2010,Information and documentation — Principles and functional requirements for records in electronic office environments — Part 3: Guidelines and functional
• ISO 16187:201355805,IS,,ISO 16187:2013,Footwear and footwear components — Test method to assess antibacterial activity,Chaussure et composants de chaussure — Méthode d'essai pour évaluer l'activ
• ISO 16192:201055887,IS,,ISO 16192:2010,Space systems — Experience gained in space projects (Lessons learned) — Principles and guidelines,Systèmes spatiaux — Évaluation de la connaissance pratiqu
• ISO 16192:201770635,IS,,ISO 16192:2017,Space systems — Experience gained in space projects (lessons learned) — Principles and guidelines,Systèmes spatiaux — Évaluation de la connaissance pratiqu
• ISO 16201:200632156,IS,,ISO 16201:2006,Technical aids for persons with disability — Environmental control systems for daily living,Aides techniques pour personnes avec un handicap — Systèmes de
• ISO 16212:200837783,IS,,ISO 16212:2008,Cosmetics — Microbiology — Enumeration of yeast and mould,Cosmétiques — Microbiologie — Dénombrement des levures et des moisissures,2008-10-07,1,['07.100.4
• ISO 16220:200028573,IS,,ISO 16220:2000,Magnesium and magnesium alloys — Magnesium alloy ingots and castings,Magnésium et alliages de magnésium — Lingots et pièces moulées en alliages de magnésiu
• ISO 16220:2000/Cor 1:200034877,IS,Cor,ISO 16220:2000/Cor 1:2000,Magnesium and magnesium alloys — Magnesium alloy ingots and castings — Technical Corrigendum 1,Magnésium et alliages de magnésium — Lingots e
• ISO 16220:200538606,IS,,ISO 16220:2005,Magnesium and magnesium alloys — Magnesium alloy ingots and castings,Magnésium et alliages de magnésium — Lingots et pièces moulées en alliage de magnésium
• ISO 16220:2005/Amd 1:200742804,IS,Amd,ISO 16220:2005/Amd 1:2007,Magnesium and magnesium alloys — Magnesium alloy ingots and castings — Amendment 1: Additional alloys,Magnésium et alliages de magnésium — Li
• ISO 16232-1:200739230,IS,,ISO 16232-1:2007,Road vehicles — Cleanliness of components of fluid circuits — Part 1: Vocabulary,Véhicules routiers — Propreté des composants des circuits de fluide — Pa
• ISO 16232-2:200739231,IS,,ISO 16232-2:2007,Road vehicles — Cleanliness of components of fluid circuits — Part 2: Method of extraction of contaminants by agitation,Véhicules routiers — Propreté des
• ISO 16232-3:200739232,IS,,ISO 16232-3:2007,Road vehicles — Cleanliness of components of fluid circuits — Part 3: Method of extraction of contaminants by pressure rinsing,Véhicules routiers — Propr
• ISO 16232-4:200739233,IS,,ISO 16232-4:2007,Road vehicles — Cleanliness of components of fluid circuits — Part 4: Method of extraction of contaminants by ultrasonic techniques,Véhicules routiers —
• ISO 16232-5:200739234,IS,,ISO 16232-5:2007,Road vehicles — Cleanliness of components of fluid circuits — Part 5: Method of extraction of contaminants on functional test bench,Véhicules routiers —
• ISO 16232-6:200739235,IS,,ISO 16232-6:2007,Road vehicles — Cleanliness of components of fluid circuits — Part 6: Particle mass determination by gravimetric analysis,Véhicules routiers — Propreté d
• ISO 16232-7:200739236,IS,,ISO 16232-7:2007,Road vehicles — Cleanliness of components of fluid circuits — Part 7: Particle sizing and counting by microscopic analysis,Véhicules routiers — Propreté
• ISO 16232-8:200739237,IS,,ISO 16232-8:2007,Road vehicles — Cleanliness of components of fluid circuits — Part 8: Particle nature determination by microscopic analysis,Véhicules routiers — Propreté
• ISO 16232-9:200739238,IS,,ISO 16232-9:2007,Road vehicles — Cleanliness of components of fluid circuits — Part 9: Particle sizing and counting by automatic light extinction particle counter,Véhicul
• ISO 16232-10:200739239,IS,,ISO 16232-10:2007,Road vehicles — Cleanliness of components of fluid circuits — Part 10: Expression of results,Véhicules routiers — Propreté des composants des circuits d
• ISO 16245:200945988,IS,,ISO 16245:2009,"Information and documentation — Boxes, file covers and other enclosures, made from cellulosic materials, for storage of paper and parchment documents","In
• ISO 16253:200737811,IS,,ISO 16253:2007,Watch-cases and accessories — Vapour phase deposited coatings,Boîtes de montres et leurs accessoires — Revêtements déposés en phase vapeur,2007-10-15,1,['3
• ISO 16254:201656019,IS,,ISO 16254:2016,Acoustics — Measurement of sound emitted by road vehicles of category M and N at standstill and low speed operation — Engineering method,Acoustique — Mesur
• ISO 16256:201256027,IS,,ISO 16256:2012,Clinical laboratory testing and in vitro diagnostic test systems — Reference method for testing the in vitro activity of antimicrobial agents against yeast
• ISO 16260:201656038,IS,,ISO 16260:2016,Paper and board — Determination of internal bond strength,Papier et carton — Détermination de la force de cohésion interne,2016-05-25,1,['85.060'],ISO/TC 6
• ISO 16269-6:200538772,IS,,ISO 16269-6:2005,Statistical interpretation of data — Part 6: Determination of statistical tolerance intervals,Interprétation statistique des données — Partie 6: Détermin
• ISO 16273:200330922,IS,,ISO 16273:2003,"Ships and marine technology — Night vision equipment for high-speed craft — Operational and performance requirements, methods of testing and required test
• ISO 16276-1:200737829,IS,,ISO 16276-1:2007,"Corrosion protection of steel structures by protective paint systems — Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture stren
• ISO 16276-2:200737830,IS,,ISO 16276-2:2007,"Corrosion protection of steel structures by protective paint systems — Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture stren
• ISO 16283-2:201559747,IS,,ISO 16283-2:2015,Acoustics — Field measurement of sound insulation in buildings and of building elements — Part 2: Impact sound insulation,Acoustique — Mesurage in situ d
• ISO 16283-2:201873929,IS,,ISO 16283-2:2018,Acoustics — Field measurement of sound insulation in buildings and of building elements — Part 2: Impact sound insulation,Acoustique — Mesurage in situ d
• ISO 16284:200129795,IS,,ISO 16284:2001,Ophthalmic optics — Information interchange for ophthalmic optical equipment,Optique ophtalmique — Échange d'informations pour l'équipement d'optique ophta
• ISO 16284:200640120,IS,,ISO 16284:2006,Ophthalmic optics — Information interchange for ophthalmic optical equipment,Optique ophtalmique — Échange d'informations pour l'équipement d'optique ophta
• ISO 16287:200530238,IS,,ISO 16287:2005,Plain bearings — Thermoplastic bushes — Dimensions and tolerances,Paliers lisses — Bagues thermoplastiques — Dimensions et tolérances,2005-03-04,1,['21.100
• ISO 16293-2:201755513,IS,,ISO 16293-2:2017,Glass in building — Basic soda lime silicate glass products — Part 2: Float glass,Verre dans la construction — Verre de silicate sodocalcique — Partie 2:
• ISO 16297:201356110,IS,,ISO 16297:2013,Milk — Bacterial count — Protocol for the evaluation of alternative methods,Lait — Dénombrement bactérien — Protocole pour l'évaluation des méthodes altern
• ISO 16304:201356129,IS,,ISO 16304:2013,Ships and marine technology — Marine environment protection — Arrangement and management of port waste reception facilities,Navires et technologie maritime
• ISO 16311-1:201456144,IS,,ISO 16311-1:2014,Maintenance and repair of concrete structures — Part 1: General principles,Entretien et réparation des structures en béton — Partie 1: Principes généraux
• ISO 16311-2:201456499,IS,,ISO 16311-2:2014,Maintenance and repair of concrete structures — Part 2: Assessment of existing concrete structures,Entretien et réparation des structures en béton — Part
• ISO 16311-3:201456500,IS,,ISO 16311-3:2014,Maintenance and repair of concrete structures — Part 3: Design of repairs and prevention,Entretien et réparation des structures en béton — Partie 3: Conc
• ISO 16311-4:201456501,IS,,ISO 16311-4:2014,Maintenance and repair of concrete structures — Part 4: Execution of repairs and prevention,Entretien et réparation des structures en béton — Partie 4: E
• ISO 16312-1:200641093,IS,,ISO 16312-1:2006,Guidance for assessing the validity of physical fire models for obtaining fire effluent toxicity data for fire hazard and risk assessment — Part 1: Crite
• ISO 16312-1:201054924,IS,,ISO 16312-1:2010,Guidance for assessing the validity of physical fire models for obtaining fire effluent toxicity data for fire hazard and risk assessment — Part 1: Crite
• ISO 16315:201656158,IS,,ISO 16315:2016,Small craft — Electric propulsion system,Petits navires — Système de propulsion électrique,2016-03-16,1,['47.080'],ISO/TC 188,9599,,[84203],"['en','fr']",2
• ISO 16322-2:200532188,IS,,ISO 16322-2:2005,Textiles — Determination of spirality after laundering — Part 2: Woven and knitted fabrics,Textiles — Détermination du vrillage après lavage — Partie 2:
• ISO 16322-2:2005/Cor 1:200746119,IS,Cor,ISO 16322-2:2005/Cor 1:2007,Textiles — Determination of spirality after laundering — Part 2: Woven and knitted fabrics — Technical Corrigendum 1,Textiles — Déterminati
• ISO 16322-3:200534471,IS,,ISO 16322-3:2005,Textiles — Determination of spirality after laundering — Part 3: Woven and knitted garments,Textiles — Détermination du vrillage après lavage — Partie 3:
• ISO 16328:200130255,IS,,ISO 16328:2001,Ships and marine technology — Gyro-compasses for high-speed craft,Navires et technologie maritime — Compas gyroscopiques pour navires à grande vitesse,2001
• ISO 16331-1:201256176,IS,,ISO 16331-1:2012,Optics and optical instruments — Laboratory procedures for testing surveying and construction instruments — Part 1: Performance of handheld laser distanc
• ISO 16333:200437857,IS,,ISO 16333:2004,Heavy commercial vehicles and buses — Steady-state rollover threshold — Tilt-table test method,Véhicules utilitaires lourds et autobus — Seuil statique de
• ISO 16338:201356187,IS,,ISO 16338:2013,Welding for aerospace applications — Resistance spot and seam welding,Soudage pour applications aérospatiales — Soudage par résistance par points et à la m
• ISO 16343:201356224,IS,,ISO 16343:2013,Energy performance of buildings — Methods for expressing energy performance and for energy certification of buildings,Performance énergétique des bâtiments
• ISO 16346:201356226,IS,,ISO 16346:2013,Energy performance of buildings — Assessment of overall energy performance,Performance énergétique des bâtiments — Evaluation de la performance énergétique
• ISO 16355-1:201562626,IS,,ISO 16355-1:2015,Application of statistical and related methods to new technology and product development process — Part 1: General principles and perspectives of Quality
• ISO 16355-3:201970662,IS,,ISO 16355-3:2019,Applications of statistical and related methods to new technology and product development process — Part 3: Quantitative approaches for the acquisition o
• ISO 16363:201256510,IS,,ISO 16363:2012,Space data and information transfer systems — Audit and certification of trustworthy digital repositories,Systèmes de transfert des informations et données
• ISO 16365-1:201456513,IS,,ISO 16365-1:2014,Plastics — Thermoplastic polyurethanes for moulding and extrusion — Part 1: Designation system and basis for specifications,Plastiques — Polyuréthannes t
• ISO 16366:200128197,IS,,ISO 16366:2001,Tools for pressing — L-shaped guides,Outillage de presse — Glissières de guidage en L,2001-03-29,1,['25.120.10'],ISO/TC 29/SC 8,9599,,[41578],"['en','fr']"
• ISO 16367:200128196,IS,,ISO 16367:2001,Tools for pressing — Guide plates — U- and V-blocks,Outillage de presse — Plaques de guidage — Blocs en U et en V,2001-03-29,1,['25.120.10'],ISO/TC 29/SC 8
• ISO 16367:200841579,IS,,ISO 16367:2008,Tools for pressing — Guide plates — U- and V-blocks,Outillage de presse — Plaques de guidage — Blocs en U et en V,2008-03-03,2,['25.120.10'],ISO/TC 29/SC 8
• ISO 16368:200329528,IS,,ISO 16368:2003,"Mobile elevating work platforms — Design calculations, safety requirements and test methods","Plates-formes élévatrices mobiles de personnel — Calculs de
• ISO 16368:201043055,IS,,ISO 16368:2010,"Mobile elevating work platforms — Design, calculations, safety requirements and test methods","Plates-formes élévatrices mobiles de personnel — Conception
• ISO 16369:200029529,IS,,ISO 16369:2000,Elevating work platforms — Mast-climbing work platforms,Matériels de mise à niveau — Plates-formes de travail se déplaçant le long de mât(s),2000-04-06,1,[
• ISO 16378:201356558,IS,,ISO 16378:2013,Space systems — Measurements of thermo-optical properties of thermal control materials,Systèmes spatiaux — Mesures des propriétés thermo-optiques des matér
• ISO 16387:200430946,IS,,ISO 16387:2004,Soil quality — Effects of pollutants on Enchytraeidae (Enchytraeus sp.) — Determination of effects on reproduction and survival,Qualité du sol — Effets des
• ISO 16387:201457067,IS,,ISO 16387:2014,Soil quality — Effects of contaminants on Enchytraeidae (Enchytraeus sp.) — Determination of effects on reproduction,Qualité du sol — Effets des contaminan
• ISO 16392:200737863,IS,,ISO 16392:2007,Tyres — Electrical resistance — Test method for measuring electrical resistance of tyres on a test rig,Pneumatiques — Résistance électrique — Méthode d'ess
• ISO 16396-1:201556516,IS,,ISO 16396-1:2015,"Plastics — Polyamide (PA) moulding and extrusion materials — Part 1: Designation system, marking of products and basis for specifications","Plastiques —
• ISO 16396-2:201767792,IS,,ISO 16396-2:2017,Plastics — Polyamide (PA) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties,Plastiques — Matériaux
• ISO 16399:201456660,IS,,ISO 16399:2014,Meters for irrigation water,Compteurs pour l'eau d'irrigation,2014-05-07,1,['65.060.35'],ISO/TC 23/SC 18,9599,"[56753,56720]",[80103],['en'],47
• ISO 16404:201356691,IS,,ISO 16404:2013,Space systems — Programme management — Requirements management,Systèmes spatiaux - Management de programme - Programme management - Management des Exigence
• ISO 16408:200430271,IS,,ISO 16408:2004,Dentistry — Oral hygiene products — Oral rinses,Art dentaire — Produits d'hygiène buccale — Bains de bouche,2004-04-19,1,['97.170'],ISO/TC 106/SC 7,9599,,[
• ISO 16408:201565257,IS,,ISO 16408:2015,Dentistry — Oral care products — Oral rinses,Médecine bucco-dentaire — Produits d'hygiène bucco-dentaires — Bains de bouche,2015-08-17,2,['97.170'],ISO/TC
• ISO 16409:200641012,IS,,ISO 16409:2006,Dentistry — Oral hygiene products — Manual interdental brushes,Art dentaire — Produits d'hygiène bucco-dentaire — Brosses interdentaires manuelles,2006-10-
• ISO 16409:2006/Amd 1:201052950,IS,Amd,ISO 16409:2006/Amd 1:2010,Dentistry — Oral hygiene products — Manual interdental brushes — Amendment 1,Art dentaire — Produits d'hygiène bucco-dentaire — Brosses inter
• ISO 16413:201356703,IS,,ISO 16413:2013,"Evaluation of thickness, density and interface width of thin films by X-ray reflectometry — Instrumental requirements, alignment and positioning, data col
• ISO 16422:200632215,IS,,ISO 16422:2006,Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure — Specifications,Tubes et assemblag
• ISO 16422:201455393,IS,,ISO 16422:2014,Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure — Specifications,Tubes et assemblag
• ISO 16425:201356739,IS,,ISO 16425:2013,Ships and marine technology — Guidelines for the installation of ship communication networks for shipboard equipment and systems,Navires et technologie mar
• ISO 16438:201256749,IS,,ISO 16438:2012,Agricultural irrigation equipment — Thermoplastic collapsible hoses for irrigation — Specifications and test methods,Matériel agricole d'irrigation — Tuyau
• ISO 16446:200230978,IS,,ISO 16446:2002,Ships and marine technology — Marine environmental protection — Adaptor for joining dissimilar boom connectors,Navires et technologie maritime — Protection
• ISO 16454:200741026,IS,,ISO 16454:2007,Space systems — Structural design — Stress analysis requirements,Systèmes spatiaux — Conception des structures — Exigences relatives à l'analyse des contra
• ISO 16457:201461556,IS,,ISO 16457:2014,Space systems — Space environment (natural and artificial) — The Earth's ionosphere model: international reference ionosphere (IRI) model and extensions to
• ISO 16462:200432220,IS,,ISO 16462:2004,"Cubic boron nitride inserts, tipped or solid — Dimensions, types","Plaquettes en nitrure de bore cubique, brasées ou monobloc — Dimensions, types",2004-06
• ISO 16463:200432222,IS,,ISO 16463:2004,"Polycristalline diamond inserts, tipped — Dimensions, types","Plaquettes brasées en diamant polycristallin — Dimensions, types",2004-06-15,1,['25.100.01']
• ISO 16467:200330990,IS,,ISO 16467:2003,Packaging — Transport packages for dangerous goods — Test methods for IBCs,Emballage — Emballages d'expédition de marchandises dangereuses — Méthodes d'ess
• ISO 16468:200530306,IS,,ISO 16468:2005,"Investment castings (steel, nickel alloys and cobalt alloys) — General technical requirements","Moulages à la cire perdue (acier, alliages de nickel et a
• ISO 16468:201559278,IS,,ISO 16468:2015,"Investment castings (steel, nickel alloys and cobalt alloys) — General technical requirements","Pièces moulées en cire perdue (acier, alliages de nickel
• ISO 16474-3:201356831,IS,,ISO 16474-3:2013,Paints and varnishes — Methods of exposure to laboratory light sources — Part 3: Fluorescent UV lamps,Peintures et vernis — Méthodes d'exposition à des s
• ISO 16484-1:201037300,IS,,ISO 16484-1:2010,Building automation and control systems (BACS) — Part 1: Project specification and implementation,Systèmes de gestion technique du bâtiment (SGTB) — Part
• ISO 16484-2:200429682,IS,,ISO 16484-2:2004,Building automation and control systems (BACS) — Part 2: Hardware,Systèmes de gestion technique du bâtiment — Partie 2: Équipement,2004-07-30,1,"['35.240
• ISO 16484-5:200337298,IS,,ISO 16484-5:2003,Building automation and control systems — Part 5: Data communication protocol,Systèmes d'automatisation et de gestion technique du bâtiment — Partie 5: P
• ISO 16484-5:200744998,IS,,ISO 16484-5:2007,Building automation and control systems — Part 5: Data communication protocol,Systèmes d'automatisation et de gestion technique du bâtiment — Partie 5: P
• ISO 16484-5:2007/Amd 1:200951375,IS,Amd,ISO 16484-5:2007/Amd 1:2009,Building automation and control systems — Part 5: Data communication protocol — Amendment 1,Systèmes d'automatisation et de gestion techniq
• ISO 16484-5:201055404,IS,,ISO 16484-5:2010,Building automation and control systems — Part 5: Data communication protocol,Systèmes d'automatisation et de gestion technique du bâtiment — Partie 5: P
• ISO 16484-5:201260689,IS,,ISO 16484-5:2012,Building automation and control systems — Part 5: Data communication protocol,Systèmes d'automatisation et de gestion technique du bâtiment — Partie 5: P
• ISO 16484-5:201463753,IS,,ISO 16484-5:2014,Building automation and control systems (BACS) — Part 5: Data communication protocol,Systèmes d'automatisation et de gestion technique du bâtiment — Part
• ISO 16484-5:201771935,IS,,ISO 16484-5:2017,Building automation and control systems (BACS) — Part 5: Data communication protocol,Systèmes d'automatisation et de gestion technique du bâtiment — Part
• ISO 16484-5:2017/Amd 1:202079629,IS,Amd,ISO 16484-5:2017/Amd 1:2020,Building automation and control systems (BACS) — Part 5: Data communication protocol — Amendment 1,Systèmes d'automatisation et de gestion
• ISO 16484-5:202284964,IS,,ISO 16484-5:2022,Building automation and control systems (BACS) — Part 5: Data communication protocol,Systèmes de contrôle et d'automatisation des bâtiments (BACS) — Part
• ISO 16484-6:200537299,IS,,ISO 16484-6:2005,Building automation and control systems (BACS) — Part 6: Data communication conformance testing,Systèmes d'automatisation et de gestion technique du bâti
• ISO 16484-6:200952149,IS,,ISO 16484-6:2009,Building automation and control systems (BACS) — Part 6: Data communication conformance testing,Systèmes d'automatisation et de gestion technique du bâti
• ISO 16484-6:201463754,IS,,ISO 16484-6:2014,Building automation and control systems (BACS) — Part 6: Data communication conformance testing,Systèmes d'automatisation et de gestion technique du bâti
• ISO 16484-6:202079630,IS,,ISO 16484-6:2020,Building automation and control systems (BACS) — Part 6: Data communication conformance testing,Systèmes d'automatisation et de gestion technique du bâti
• ISO 16484-6:202490218,IS,,ISO 16484-6:2024,Building automation and control systems (BACS) — Part 6: Data communication conformance testing,Systèmes d'automatisation et de gestion technique du bâti
• ISO 16486-1:201256837,IS,,ISO 16486-1:2012,Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Pa
• ISO 16486-1:2012/Amd 1:201465074,IS,Amd,ISO 16486-1:2012/Amd 1:2014,Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical
• ISO 16486-1:202074158,IS,,ISO 16486-1:2020,Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Pa
• ISO 16486-2:201256838,IS,,ISO 16486-2:2012,Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Pa
• ISO 16486-2:2012/Amd 1:201465075,IS,Amd,ISO 16486-2:2012/Amd 1:2014,Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical
• ISO 16486-2:202074159,IS,,ISO 16486-2:2020,Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Pa
• ISO 16486-3:201256839,IS,,ISO 16486-3:2012,Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Pa
• ISO 16486-3:2012/Amd 1:201465076,IS,Amd,ISO 16486-3:2012/Amd 1:2014,Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical
• ISO 16486-3:202074160,IS,,ISO 16486-3:2020,Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Pa
• ISO 16486-4:201665195,IS,,ISO 16486-4:2016,Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Pa
• ISO 16486-4:202278883,IS,,ISO 16486-4:2022,Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Pa
• ISO 16486-5:201256840,IS,,ISO 16486-5:2012,Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Pa
• ISO 16486-6:201256841,IS,,ISO 16486-6:2012,"Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — P
• ISO 16494:201456867,IS,,ISO 16494:2014,Heat recovery ventilators and energy recovery ventilators — Method of test for performance,Ventilateurs-récupérateurs de chaleur et ventilateurs-récupérate
• ISO 16495:201356877,IS,,ISO 16495:2013,Packaging — Transport packaging for dangerous goods — Test methods,Emballages — Emballages de transport pour marchandises dangereuses — Méthodes d'essai,20
• ISO 16505:201556896,IS,,ISO 16505:2015,Road vehicles — Ergonomic and performance aspects of Camera Monitor Systems — Requirements and test procedures,Véhicules routiers — Aspects ergonomiques et
• ISO 16531:201357058,IS,,ISO 16531:2013,Surface chemical analysis — Depth profiling — Methods for ion beam alignment and the associated measurement of current or current density for depth profili
• ISO 16534:201257062,IS,,ISO 16534:2012,Thermal insulating products for building applications — Determination of compressive creep,Produits isolants thermiques destinés aux applications du bâtime
• ISO 16535:201257063,IS,,ISO 16535:2012,Thermal insulating products for building applications — Determination of long-term water absorption by immersion,Produits isolants thermiques destinés aux
• ISO 16536:201257064,IS,,ISO 16536:2012,Thermal insulating products for building applications — Determination of long-term water absorption by diffusion,Produits isolants thermiques destinés aux
• ISO 16546:201257076,IS,,ISO 16546:2012,Thermal insulating products for building applications — Determination of freeze-thaw resistance,Produits isolants thermiques destinés aux applications du b
• ISO 16549:200430371,IS,,ISO 16549:2004,Textiles — Unevenness of textile strands — Capacitance method,Textiles — Irrégularité des fils textiles — Méthode capacitive,2004-05-26,1,['59.060.01'],ISO
• ISO 16559:201457111,IS,,ISO 16559:2014,"Solid biofuels — Terminology, definitions and descriptions","Biocombustibles solides — Terminologie, définitions et descriptions",2014-07-07,1,"['27.190',
• ISO 16565:200232312,IS,,ISO 16565:2002,Rubber — Determination of 5-ethylidenenorbornene (ENB) or dicyclopentadiene (DCPD) in ethylene-propylene-diene (EPDM) terpolymers,Caoutchouc — Déterminatio
• ISO 16565:200851196,IS,,ISO 16565:2008,Rubber — Determination of 5-ethylidenenorbornene (ENB) or dicyclopentadiene (DCPD) in ethylene-propylene-diene (EPDM) terpolymers,Caoutchouc — Déterminatio
• ISO 16571:201457119,IS,,ISO 16571:2014,Systems for evacuation of plume generated by medical devices,Systèmes de gaz médicaux — Systemes d'évacuation des effluents gazeux générés par l'utilisatio
• ISO 16573:201557128,IS,,ISO 16573:2015,Steel — Measurement method for the evaluation of hydrogen embrittlement resistance of high strength steels,Acier — Méthode de mesure pour l'évaluation de l
• ISO 16577:201657184,IS,,ISO 16577:2016,Molecular biomarker analysis — Terms and definitions,Analyse moléculaire de biomarqueurs — Termes et définitions,2016-03-16,1,['67.050'],ISO/TC 34/SC 16,95
• ISO 16578:201357185,IS,,ISO 16578:2013,Molecular biomarker analysis — General definitions and requirements for microarray detection of specific nucleic acid sequences,Analyse moléculaire des bi
• ISO 16589-1:200129129,IS,,ISO 16589-1:2001,Rotary shaft lip-type seals incorporating thermoplastic sealing elements — Part 1: Nominal dimensions and tolerances,Bagues d'étanchéité à lèvres pour ar
• ISO 16589-2:200129130,IS,,ISO 16589-2:2001,Rotary shaft lip-type seals incorporating thermoplastic sealing elements — Part 2: Vocabulary,Bagues d'étanchéité à lèvres pour arbres tournants incorpor
• ISO 16589-3:200129131,IS,,ISO 16589-3:2001,"Rotary shaft lip-type seals incorporating thermoplastic sealing elements — Part 3: Storage, handling and installation","Bagues d'étanchéité à lèvres pou
• ISO 16589-4:200129132,IS,,ISO 16589-4:2001,Rotary shaft lip-type seals incorporating thermoplastic sealing elements — Part 4: Performance test procedures,Bagues d'étanchéité à lèvres pour arbres t
• ISO 16589-5:200129133,IS,,ISO 16589-5:2001,Rotary shaft lip-type seals incorporating thermoplastic sealing elements — Part 5: Identification of visual imperfections,Bagues d'étanchéité à lèvres po
• ISO 16590:200031031,IS,,ISO 16590:2000,Water quality — Determination of mercury — Methods involving enrichment by amalgamation,Qualité de l'eau — Dosage du mercure — Méthodes après enrichissemen
• ISO 16592:200638011,IS,,ISO 16592:2006,Microbeam analysis — Electron probe microanalysis — Guidelines for determining the carbon content of steels using a calibration curve method,Analyse par mi
• ISO 16609:200430381,IS,,ISO 16609:2004,Banking — Requirements for message authentication using symmetric techniques,Banque — Exigences pour authentification des messages utilisant des techniques
• ISO 16609:201255225,IS,,ISO 16609:2012,Financial services — Requirements for message authentication using symmetric techniques,Services financiers — Exigences pour l'authentification des message
• ISO 16610-21:201150176,IS,,ISO 16610-21:2011,Geometrical product specifications (GPS) — Filtration — Part 21: Linear profile filters: Gaussian filters,Spécification géométrique des produits (GPS) —
• ISO 16610-22:201561377,IS,,ISO 16610-22:2015,Geometrical product specifications (GPS) — Filtration — Part 22: Linear profile filters: Spline filters,Spécification géométrique des produits (GPS) — F
• ISO 16610-29:201561378,IS,,ISO 16610-29:2015,Geometrical product specifications (GPS) — Filtration — Part 29: Linear profile filters: Spline wavelets,Spécification géométrique des produits (GPS) —
• ISO 16610-31:201666242,IS,,ISO 16610-31:2016,Geometrical product specifications (GPS) — Filtration — Part 31: Robust profile filters: Gaussian regression filters,Spécification géométrique des produ
• ISO 16611:201765107,IS,,ISO 16611:2017,"Plastics piping systems for drainage and sewerage without pressure — Non-circular pipes and joints made of glass-reinforced thermosetting plastics (GRP) b
• ISO 16620-2:201563767,IS,,ISO 16620-2:2015,Plastics — Biobased content — Part 2: Determination of biobased carbon content,Plastiques — Teneur biosourcée — Partie 2: Détermination de la teneur en c
• ISO 16620-4:201663817,IS,,ISO 16620-4:2016,Plastics — Biobased content — Part 4: Determination of biobased mass content,Plastiques — Teneur biosourcée — Partie 4: Détermination de la teneur en mas
• ISO 16625:201357301,IS,,ISO 16625:2013,"Cranes and hoists — Selection of wire ropes, drums and sheaves","Appareils de levage à charge suspendue et treuils — Choix des câbles, tambours et poulies
• ISO 16628:200844167,IS,,ISO 16628:2008,Tracheobronchial tubes — Sizing and marking,Sondes trachéo-bronchiques — Dimensionnement et marquage,2008-11-05,1,['11.040.10'],ISO/TC 121/SC 2,9599,[31034
• ISO 16630:200942813,IS,,ISO 16630:2009,Metallic materials — Sheet and strip — Hole expanding test,Matériaux métalliques — Tôles et bandes — Essai d'expansion de trou,2009-07-02,1,['77.040.10'],I
• ISO 16630:201769771,IS,,ISO 16630:2017,Metallic materials — Sheet and strip — Hole expanding test,Matériaux métalliques — Tôles et bandes — Essai d'expansion de trou,2017-10-02,2,['77.040.10'],I
• ISO 16632:200330396,IS,,ISO 16632:2003,Tobacco and tobacco products — Determination of water content — Gas-chromatographic method,Tabac et produits du tabac — Détermination de la teneur en eau —
• ISO 16632:201355734,IS,,ISO 16632:2013,Tobacco and tobacco products — Determination of water content — Gas-chromatographic method,Tabac et produits du tabac — Détermination de la teneur en eau —
• ISO 16642:200332347,IS,,ISO 16642:2003,Computer applications in terminology — Terminological markup framework,Applications informatiques en terminologie — Plate-forme pour le balisage de termino
• ISO 16642:201756063,IS,,ISO 16642:2017,Computer applications in terminology — Terminological markup framework,Applications informatiques en terminologie — Plate-forme pour le balisage de termino
• ISO 16649-1:200129823,IS,,ISO 16649-1:2001,Microbiology of food and animal feeding stuffs — Horizontal method for the enumeration of beta-glucuronidase-positive Escherichia coli — Part 1: Colony-c
• ISO 16650:200430400,IS,,ISO 16650:2004,Bead wire,Fil d'acier pour tringle,2004-06-17,1,['77.140.65'],ISO/TC 17/SC 17,9599,,"[59565,86828]","['en','fr']",9
• ISO 16653-2:200939104,IS,,ISO 16653-2:2009,"Mobile elevating work platforms — Design, calculations, safety requirements and test methods relative to special features — Part 2: MEWPs with non-condu
• ISO 16656:200429748,IS,,ISO 16656:2004,"Hydraulic fluid power — Single rod, short-stroke cylinders with bores from 32 mm to 100 mm for use at 10 MPa (100 bar) — Mounting dimensions","Transmissio
• ISO 16657:200638031,IS,,ISO 16657:2006,Sensory analysis — Apparatus — Olive oil tasting glass,Analyse sensorielle — Appareillage — Verre pour la dégustation de l'huile d'olive,2006-07-06,1,"['67
• ISO 16663-1:200330416,IS,,ISO 16663-1:2003,Fishing nets — Method of test for the determination of mesh size — Part 1: Opening of mesh,Filets de pêche — Méthode d'essai pour la détermination des di
• ISO 16664:200430417,IS,,ISO 16664:2004,Gas analysis — Handling of calibration gases and gas mixtures — Guidelines,Analyse des gaz — Manutention des gaz et des mélanges de gaz pour étalonnage — L
• ISO 16665:200532348,IS,,ISO 16665:2005,Water quality — Guidelines for quantitative sampling and sample processing of marine soft-bottom macrofauna,Qualité de l'eau — Lignes directrices pour l'éc
• ISO 16671:200332351,IS,,ISO 16671:2003,Ophthalmic implants — Irrigating solutions for ophthalmic surgery,Implants ophtalmiques — Solutions d'irrigation pour la chirurgie ophtalmique,2003-05-08,1
• ISO 16671:201565166,IS,,ISO 16671:2015,Ophthalmic implants — Irrigating solutions for ophthalmic surgery,Implants ophtalmiques — Solutions d'irrigation pour la chirurgie ophtalmique,2015-08-07,2
• ISO 16671:2015/Amd 1:201772615,IS,Amd,ISO 16671:2015/Amd 1:2017,Ophthalmic implants — Irrigating solutions for ophthalmic surgery — Amendment 1,Implants ophtalmiques — Solutions d'irrigation pour la chirur
• ISO 16672:200332352,IS,,ISO 16672:2003,Ophthalmic implants — Ocular endotamponades,Implants ophtalmiques — Produits de tamponnement endoculaires,2003-01-27,1,['11.040.70'],ISO/TC 172/SC 7,9599,,
• ISO 16672:201565164,IS,,ISO 16672:2015,Ophthalmic implants — Ocular endotamponades,Implants ophtalmiques — Produits de tamponnement endoculaires,2015-08-07,2,['11.040.70'],ISO/TC 172/SC 7,9599,[
• ISO 16673:200738035,IS,,ISO 16673:2007,Road vehicles — Ergonomic aspects of transport information and control systems — Occlusion method to assess visual demand due to the use of in-vehicle syst
• ISO 16678:201457391,IS,,ISO 16678:2014,Guidelines for interoperable object identification and related authentication systems to deter counterfeiting and illicit trade,Lignes directrices pour l'i
• ISO 16684-1:201257421,IS,,ISO 16684-1:2012,"Graphic technology — Extensible metadata platform (XMP) specification — Part 1: Data model, serialization and core properties","Technologie graphique —
• ISO 16694:201557447,IS,,ISO 16694:2015,Space systems — The measured parameters at firing bench and flight tests of liquid rocket engines,Systèmes spatiaux — Paramètres mesurés au banc d'allumage
• ISO 16698:201357451,IS,,ISO 16698:2013,Space environment (natural and artificial) — Methods for estimation of future geomagnetic activity,Environnement spatial (naturel et artificiel) — Méthodes
• ISO 16700:200430420,IS,,ISO 16700:2004,Microbeam analysis — Scanning electron microscopy — Guidelines for calibrating image magnification,Analyse par microfaisceaux — Microscopie électronique à
• ISO 16701:200329388,IS,,ISO 16701:2003,Corrosion of metals and alloys — Corrosion in artificial atmosphere — Accelerated corrosion test involving exposure under controlled conditions of humidity
• ISO 16701:201554460,IS,,ISO 16701:2015,Corrosion of metals and alloys — Corrosion in artificial atmosphere — Accelerated corrosion test involving exposure under controlled conditions of humidity
• ISO 16702:200130421,IS,,ISO 16702:2001,Workplace air quality — Determination of total isocyanate groups in air using 2-(1-methoxyphenyl)piperazine and liquid chromatography,Qualité de l'air des
• ISO 16702:200742007,IS,,ISO 16702:2007,Workplace air quality — Determination of total organic isocyanate groups in air using 1-(2-methoxyphenyl)piperazine and liquid chromatography,Qualité de l'
• ISO 16711:201561113,IS,,ISO 16711:2015,Seismic assessment and retrofit of concrete structures,Évaluation sismique et réhabilitation de structures en béton,2015-05-08,1,['91.100.30'],ISO/TC 71/SC
• ISO 16730:200840974,IS,,ISO 16730:2008,"Fire safety engineering — Assessment, verification and validation of calculation methods","Ingénierie de la sécurité incendie — Évaluation, vérification e
• ISO 16733-1:201563140,IS,,ISO 16733-1:2015,Fire safety engineering — Selection of design fire scenarios and design fires — Part 1: Selection of design fire scenarios,Ingénierie de la sécurité ince
• ISO 16734:200637656,IS,,ISO 16734:2006,Fire safety engineering — Requirements governing algebraic equations — Fire plumes,Ingénierie de la sécurité incendie — Exigences régissant les équations a
• ISO 16735:200637657,IS,,ISO 16735:2006,Fire safety engineering — Requirements governing algebraic equations — Smoke layers,Ingénierie de la sécurité incendie — Exigences régissant les équations
• ISO 16736:200637658,IS,,ISO 16736:2006,Fire safety engineering — Requirements governing algebraic equations — Ceiling jet flows,Ingénierie de la sécurité incendie — Exigences régissant les équat
• ISO 16737:200637659,IS,,ISO 16737:2006,Fire safety engineering — Requirements governing algebraic equations — Vent flows,Ingénierie de la sécurité incendie — Exigences régissant les équations al
• ISO 16737:201251599,IS,,ISO 16737:2012,Fire safety engineering — Requirements governing algebraic equations — Vent flows,Ingénierie de la sécurité incendie — Exigences régissant les équations al
• ISO 16739-1:201870303,IS,,ISO 16739-1:2018,Industry Foundation Classes (IFC) for data sharing in the construction and facility management industries — Part 1: Data schema,Classes IFC pour le parta
• ISO 16739:201351622,IS,,ISO 16739:2013,Industry Foundation Classes (IFC) for data sharing in the construction and facility management industries,Classes de fondation d'industrie (IFC) pour le pa
• ISO 16744:200330433,IS,,ISO 16744:2003,Dentistry — Base metal materials for fixed dental restorations,Art dentaire — Matériaux métalliques pour les restaurations fixes,2003-12-10,1,['11.060.10']
• ISO 16745:201557576,IS,,ISO 16745:2015,Environmental performance of buildings — Carbon metric of a building — Use stage,Performance environnementale des bâtiments — Métrique du carbone des bâtim
• ISO 16750-1:200335573,IS,,ISO 16750-1:2003,Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 1: General,Véhicules routiers — Spécifications d'envi
• ISO 16750-1:200639008,IS,,ISO 16750-1:2006,Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 1: General,Véhicules routiers — Spécifications d'envi
• ISO 16750-1:201869568,IS,,ISO 16750-1:2018,Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 1: General,Véhicules routiers — Spécifications d'envi
• ISO 16750-2:200335574,IS,,ISO 16750-2:2003,Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 2: Electrical loads,Véhicules routiers — Spécificatio
• ISO 16750-2:200639009,IS,,ISO 16750-2:2006,Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 2: Electrical loads,Véhicules routiers — Spécificatio
• ISO 16750-2:201046044,IS,,ISO 16750-2:2010,Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 2: Electrical loads,Véhicules routiers — Spécificatio
• ISO 16750-2:201261280,IS,,ISO 16750-2:2012,Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 2: Electrical loads,Véhicules routiers — Spécificatio
• ISO 16750-3:200335575,IS,,ISO 16750-3:2003,Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 3: Mechanical loads,Véhicules routiers — Spécificatio
• ISO 16750-3:200739010,IS,,ISO 16750-3:2007,Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 3: Mechanical loads,Véhicules routiers — Spécificatio
• ISO 16750-3:201258049,IS,,ISO 16750-3:2012,Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 3: Mechanical loads,Véhicules routiers — Spécificatio
• ISO 16750-4:200335576,IS,,ISO 16750-4:2003,Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 4: Climatic loads,Véhicules routiers — Spécifications
• ISO 16750-4:200639011,IS,,ISO 16750-4:2006,Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 4: Climatic loads,Véhicules routiers — Spécifications
• ISO 16750-4:201046043,IS,,ISO 16750-4:2010,Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 4: Climatic loads,Véhicules routiers — Spécifications
• ISO 16750-5:200335577,IS,,ISO 16750-5:2003,Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 5: Chemical loads,Véhicules routiers — Spécifications
• ISO 16750-5:201046042,IS,,ISO 16750-5:2010,Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 5: Chemical loads,Véhicules routiers — Spécifications
• ISO 16770:200431061,IS,,ISO 16770:2004,Plastics — Determination of environmental stress cracking (ESC) of polyethylene — Full-notch creep test (FNCT),Plastiques — Détermination de la fissuration
• ISO 16773-1:200738087,IS,,ISO 16773-1:2007,Paints and varnishes — Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens — Part 1: Terms and definitions,Peintures et verni
• ISO 16773-2:200738088,IS,,ISO 16773-2:2007,Paints and varnishes — Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens — Part 2: Collection of data,Peintures et vernis —
• ISO 16773-3:200942045,IS,,ISO 16773-3:2009,Paints and varnishes — Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens — Part 3: Processing and analysis of data from dum
• ISO 16773-4:200942046,IS,,ISO 16773-4:2009,Paints and varnishes — Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens — Part 4: Examples of spectra of polymer-coated sp
• ISO 16781:201357702,IS,,ISO 16781:2013,Space systems — Simulation requirements for control system,Systèmes spatiaux — Exigences de simulation pour le système de contrôle,2013-11-19,1,['49.140'],
• ISO 16784-1:200639604,IS,,ISO 16784-1:2006,Corrosion of metals and alloys — Corrosion and fouling in industrial cooling water systems — Part 1: Guidelines for conducting pilot-scale evaluation of
• ISO 16784-2:200629612,IS,,ISO 16784-2:2006,Corrosion of metals and alloys — Corrosion and fouling in industrial cooling water systems — Part 2: Evaluation of the performance of cooling water trea
• ISO 16787:201663626,IS,,ISO 16787:2016,Intelligent transport systems — Assisted Parking System (APS) — Performance requirements and test procedures,Systèmes intelligents de transport — Système d
• ISO 16790:200541632,IS,,ISO 16790:2005,Plastics — Determination of drawing characteristics of thermoplastics in the molten state,Plastiques — Détermination des caractéristiques d'étirage des the
• ISO 16792:200631065,IS,,ISO 16792:2006,Technical product documentation — Digital product definition data practices,Documentation technique de produits — Données de définition d'un produit,2006-1
• ISO 16792:201556865,IS,,ISO 16792:2015,Technical product documentation — Digital product definition data practices,Documentation technique de produits — Données de définition d'un produit,2015-1
• ISO 16793:200539217,IS,,ISO 16793:2005,Nuclear fuel technology — Guide for ceramographic preparation of UO2 sintered pellets for microstructure examination,Technologie du combustible nucléaire —
• ISO 16795:200431068,IS,,ISO 16795:2004,Nuclear energy — Determination of Gd2O3 content of gadolinium fuel pellets by X-ray fluorescence spectrometry,Énergie nucléaire — Dosage de Gd2O3 dans des
• ISO 16796:200440243,IS,,ISO 16796:2004,Nuclear energy — Determination of Gd2O3 content in gadolinium fuel blends and gadolinium fuel pellets by atomic emission spectrometry using an inductively
• ISO 16808:201457777,IS,,ISO 16808:2014,Metallic materials — Sheet and strip — Determination of biaxial stress-strain curve by means of bulge test with optical measuring systems,Matériaux métalli
• ISO 16809:201257780,IS,,ISO 16809:2012,Non-destructive testing — Ultrasonic thickness measurement,Essais non destructifs — Mesurage de l'épaisseur par ultrasons,2012-11-13,1,['19.100'],ISO/TC 13
• ISO 16809:201772430,IS,,ISO 16809:2017,Non-destructive testing — Ultrasonic thickness measurement,Essais non destructifs — Mesurage de l'épaisseur par ultrasons,2017-11-28,2,['19.100'],ISO/TC 13
• ISO 16810:201257781,IS,,ISO 16810:2012,Non-destructive testing — Ultrasonic testing — General principles,Essais non destructifs — Contrôle par ultrasons — Principes généraux,2012-03-23,1,['19.10
• ISO 16811:201257782,IS,,ISO 16811:2012,Non-destructive testing — Ultrasonic testing — Sensitivity and range setting,Essais non destructifs — Contrôle par ultrasons — Réglage de la sensibilité et
• ISO 16812:200232432,IS,,ISO 16812:2002,Petroleum and natural gas industries — Shell-and-tube heat exchangers,Industries du pétrole et du gaz naturel — Échangeurs de chaleur à faisceaux,2002-07-1
• ISO 16812:200738661,IS,,ISO 16812:2007,"Petroleum, petrochemical and natural gas industries — Shell-and-tube heat exchangers","Industries du pétrole, de la pétrochimie et du gaz naturel — Échang
• ISO 16813:200641300,IS,,ISO 16813:2006,Building environment design — Indoor environment — General principles,Conception de l'environnement des bâtiments — Environnement intérieur — Principes gén
• ISO 16817:201250479,IS,,ISO 16817:2012,Building environment design — Indoor environment — Design process for visual environment,Conception de l'environnement des bâtiments — Environnement intéri
• ISO 16820:200431085,IS,,ISO 16820:2004,Sensory analysis — Methodology — Sequential analysis,Analyse sensorielle — Méthodologie — Analyse séquentielle,2004-06-23,1,['67.240'],ISO/TC 34/SC 12,9599
• ISO 16823:201257783,IS,,ISO 16823:2012,Non-destructive testing — Ultrasonic testing — Transmission technique,Essais non destructifs — Contrôle par ultrasons — Technique par transmission,2012-03-
• ISO 16826:201257784,IS,,ISO 16826:2012,Non-destructive testing — Ultrasonic testing — Examination for discontinuities perpendicular to the surface,Essais non destructifs — Contrôle par ultrasons
• ISO 16827:201257785,IS,,ISO 16827:2012,Non-destructive testing — Ultrasonic testing — Characterization and sizing of discontinuities,Essais non destructifs — Contrôle par ultrasons — Caractérisa
• ISO 16828:201257786,IS,,ISO 16828:2012,Non-destructive testing — Ultrasonic testing — Time-of-flight diffraction technique as a method for detection and sizing of discontinuities,Essais non dest
• ISO 16831:201257789,IS,,ISO 16831:2012,Non-destructive testing — Ultrasonic testing — Characterization and verification of ultrasonic thickness measuring equipment,Essais non destructifs — Contr
• ISO 16834:200638132,IS,,ISO 16834:2006,"Welding consumables — Wire electrodes, wires, rods and deposits for gas-shielded arc welding of high strength steels — Classification","Produits consommab
• ISO 16834:201257189,IS,,ISO 16834:2012,"Welding consumables — Wire electrodes, wires, rods and deposits for gas shielded arc welding of high strength steels — Classification","Produits consommab
• ISO 16840-2:200740980,IS,,ISO 16840-2:2007,Wheelchair seating — Part 2: Determination of physical and mechanical characteristics of devices intended to manage tissue integrity — Seat cushions,Sièg
• ISO 16840-3:200642116,IS,,ISO 16840-3:2006,"Wheelchair seating — Part 3: Determination of static, impact and repetitive load strengths for postural support devices","Sièges de fauteuils roulants —
• ISO 16840-3:201461349,IS,,ISO 16840-3:2014,"Wheelchair seating — Part 3: Determination of static, impact and repetitive load strengths for postural support devices","Sièges de fauteuils roulants —
• ISO 16840-6:201550420,IS,,ISO 16840-6:2015,Wheelchair seating — Part 6: Simulated use and determination of the changes in properties of seat cushions,Sièges de fauteuils roulants — Partie 6: Simul
• ISO 16840-10:201457578,IS,,ISO 16840-10:2014,Wheelchairs — Resistance to ignition of non-integrated seat and back support cushions — Part 10: Requirements and test methods,Fauteuils roulants — Rési
• ISO 16842:201457812,IS,,ISO 16842:2014,Metallic materials — Sheet and strip — Biaxial tensile testing method using a cruciform test piece,Matériaux métalliques — Tôles et bandes — Méthode d'essa
• ISO 16844-1:200133654,IS,,ISO 16844-1:2001,Road vehicles — Tachograph systems — Part 1: Electrical connectors,Véhicules routiers — Systèmes tachygraphes — Partie 1: Connecteurs électriques,2001-09
• ISO 16844-1:2001/Cor 1:200541342,IS,Cor,ISO 16844-1:2001/Cor 1:2005,Road vehicles — Tachograph systems — Part 1: Electrical connectors — Technical Corrigendum 1,Véhicules routiers — Systèmes tachygraphes — P
• ISO 16844-1:201355436,IS,,ISO 16844-1:2013,Road vehicles — Tachograph systems — Part 1: Electrical connectors,Véhicules routiers — Systèmes tachygraphes — Partie 1: Connecteurs électriques,2013-02
• ISO 16844-2:200433655,IS,,ISO 16844-2:2004,"Road vehicles — Tachograph systems — Part 2: Recording unit, electrical interface","Véhicules routiers — Systèmes tachygraphes — Partie 2: Unité d'enreg
• ISO 16844-2:201152371,IS,,ISO 16844-2:2011,Road vehicles — Tachograph systems — Part 2: Electrical interface with recording unit,Véhicules routiers — Systèmes tachygraphes — Partie 2: Interface él
• ISO 16844-3:200433656,IS,,ISO 16844-3:2004,Road vehicles — Tachograph systems — Part 3: Motion sensor interface,Véhicules routiers — Systèmes tachygraphes — Partie 3: Interface de capteur de mouve
• ISO 16844-3:2004/Cor 1:200643938,IS,Cor,ISO 16844-3:2004/Cor 1:2006,Road vehicles — Tachograph systems — Part 3: Motion sensor interface — Technical Corrigendum 1,Véhicules routiers — Systèmes tachygraphes —
• ISO 16844-4:200433657,IS,,ISO 16844-4:2004,Road vehicles — Tachograph systems — Part 4: CAN interface,Véhicules routiers — Systèmes tachygraphes — Partie 4: Interface CAN,2004-09-07,1,['43.040.10'
• ISO 16844-4:201557314,IS,,ISO 16844-4:2015,Road vehicles — Tachograph systems — Part 4: CAN interface,Véhicules routiers — Systèmes tachygraphes — Partie 4: Interface CAN,2015-01-13,2,['43.040.10'
• ISO 16844-6:200433659,IS,,ISO 16844-6:2004,Road vehicles — Tachograph systems — Part 6: Diagnostics,Véhicules routiers — Systèmes tachygraphes — Partie 6: Diagnostic,2004-08-17,1,['43.040.10'],ISO
• ISO 16844-6:201559683,IS,,ISO 16844-6:2015,Road vehicles — Tachograph systems — Part 6: Diagnostics,Véhicules routiers — Systèmes tachygraphes — Partie 6: Diagnostic,2015-01-13,2,['43.040.10'],ISO
• ISO 16844-7:200433660,IS,,ISO 16844-7:2004,Road vehicles — Tachograph systems — Part 7: Parameters,Véhicules routiers — Systèmes tachygraphes — Partie 7: Paramètres,2004-08-17,1,['43.040.10'],ISO/
• ISO 16844-7:201557315,IS,,ISO 16844-7:2015,Road vehicles — Tachograph systems — Part 7: Parameters,Véhicules routiers — Systèmes tachygraphes — Partie 7: Paramètres,2015-01-13,2,['43.040.10'],ISO/
• ISO 16845-2:201459504,IS,,ISO 16845-2:2014,Road vehicles — Controller area network (CAN) conformance test plan — Part 2: High-speed medium access unit with selective wake-up functionality,Véhicule
• ISO 16845:200430478,IS,,ISO 16845:2004,Road vehicles — Controller area network (CAN) — Conformance test plan,Véhicules routiers — Gestionnaire de réseau de communication (CAN) — Plan d'essai de
• ISO 16847:201657817,IS,,ISO 16847:2016,Textiles — Test method for assessing the matting appearance of napped fabrics after cleansing,Textiles — Méthode d'essai pour l'évaluation de l'aspect du m
• ISO 16851:200430484,IS,,ISO 16851:2004,Textile conveyor belts — Determination of the net length of an endless (spliced) conveyor belt,Courroies transporteuses à carcasse textile — Méthode de mes
• ISO 16852:200838139,IS,,ISO 16852:2008,"Flame arresters — Performance requirements, test methods and limits for use","Arrête-flammes — Exigences de performance, méthodes d'essai et limites d'uti
• ISO 16852:2008/Cor 1:200853017,IS,Cor,ISO 16852:2008/Cor 1:2008,"Flame arresters — Performance requirements, test methods and limits for use — Technical Corrigendum 1","Arrête-flammes — Exigences de perfor
• ISO 16852:2008/Cor 2:200954706,IS,Cor,ISO 16852:2008/Cor 2:2009,"Flame arresters — Performance requirements, test methods and limits for use — Technical Corrigendum 2","Arrête-flammes — Exigences de perfor
• ISO 16852:201661649,IS,,ISO 16852:2016,"Flame arresters — Performance requirements, test methods and limits for use","Arrête-flammes — Exigences de performance, méthodes d'essai et limites d'uti
• ISO 16853:200332463,IS,,ISO 16853:2003,"Textile machinery — Sliver cans, rectangular — Main dimensions and tolerances","Matériel pour l'industrie textile — Pots pour rubans, rectangulaires — Di
• ISO 16869:200130485,IS,,ISO 16869:2001,Plastics — Assessment of the effectiveness of fungistatic compounds in plastics formulations,Plastiques — Évaluation de l'efficacité des composés fongistat
• ISO 16872:200840423,IS,,ISO 16872:2008,"Short link chains for lifting purposes — Grade VH, fine tolerance for manually operated chain hoists","Chaînes de levage à maillons courts — Classe VH, to
• ISO 16873:200230489,IS,,ISO 16873:2002,Hydraulic fluid power — Pressure switches — Mounting surfaces,Transmissions hydrauliques — Pressostats — Plans de pose,2002-04-25,1,['23.100.50'],ISO/TC 13
• ISO 16873:2002/Amd 1:200540309,IS,Amd,ISO 16873:2002/Amd 1:2005,Hydraulic fluid power — Pressure switches — Mounting surfaces — Amendment 1,Transmissions hydrauliques — Pressostats — Plans de pose — Amende
• ISO 16877:200840424,IS,,ISO 16877:2008,"Short link chains for lifting purposes — Grade TH, fine tolerance for manually operated chain hoists","Chaînes de levage à maillons courts — Classe TH, to
• ISO 16881-1:200538151,IS,,ISO 16881-1:2005,Cranes — Design calculation for rail wheels and associated trolley track supporting structure — Part 1: General,Appareils de levage à charge suspendue —
• ISO 16889:199910495,IS,,ISO 16889:1999,Hydraulic fluid power filters — Multi-pass method for evaluating filtration performance of a filter element,Filtres pour transmissions hydrauliques — Évalu
• ISO 16889:200844870,IS,,ISO 16889:2008,Hydraulic fluid power — Filters — Multi-pass method for evaluating filtration performance of a filter element,Transmissions hydrauliques — Filtres — Évalua
• ISO 16889:2008/Amd 1:201874774,IS,Amd,ISO 16889:2008/Amd 1:2018,Hydraulic fluid power — Filters — Multi-pass method for evaluating filtration performance of a filter element — Amendment 1,Transmissions hyd
• ISO 16890-2:201657865,IS,,ISO 16890-2:2016,Air filters for general ventilation — Part 2: Measurement of fractional efficiency and air flow resistance,Filtres à air de ventilation générale — Partie
• ISO 16890-3:201657866,IS,,ISO 16890-3:2016,Air filters for general ventilation — Part 3: Determination of the gravimetric efficiency and the air flow resistance versus the mass of test dust captur
• ISO 16890-4:201657867,IS,,ISO 16890-4:2016,Air filters for general ventilation — Part 4: Conditioning method to determine the minimum fractional test efficiency,Filtres à air de ventilation généra
• ISO 16893-1:200832474,IS,,ISO 16893-1:2008,Wood-based panels — Particleboard — Part 1: Classifications,Panneaux à base de bois — Panneaux de particules — Partie 1: Classifications,2008-03-04,1,['7
• ISO 16893-2:201032479,IS,,ISO 16893-2:2010,Wood-based panels — Particleboard — Part 2: Requirements,Panneaux à base de bois — Panneaux de particules — Partie 2: Exigences,2010-10-28,1,['79.060.20'
• ISO 16895-1:200832476,IS,,ISO 16895-1:2008,Wood-based panels — Dry-process fibreboard — Part 1: Classifications,Panneaux à base de bois — Panneaux de fibres obtenus par procédé à sec — Partie 1: C
• ISO 16895-2:201032485,IS,,ISO 16895-2:2010,Wood-based panels — Dry-process fibreboard — Part 2: Requirements,Panneaux à base de bois — Panneaux de fibres obtenus par procédé à sec — Partie 2: Exig
• ISO 16900-1:201438803,IS,,ISO 16900-1:2014,Respiratory protective devices — Methods of test and test equipment — Part 1: Determination of inward leakage,Appareils de protection respiratoire — Méth
• ISO 16900-2:200938875,IS,,ISO 16900-2:2009,Respiratory protective devices — Methods of test and test equipment — Part 2: Determination of breathing resistance,Appareils de protection respiratoire
• ISO 16900-6:201552479,IS,,ISO 16900-6:2015,Respiratory protective devices — Methods of test and test equipment — Part 6: Mechanical resistance/strength of components and connections,Appareils de
• ISO 16900-7:201552480,IS,,ISO 16900-7:2015,Respiratory protective devices — Methods of test and test equipment — Part 7: Practical performance test methods,Appareils de protection respiratoire — M
• ISO 16900-11:201352484,IS,,ISO 16900-11:2013,Respiratory protective devices — Methods of test and test equipment — Part 11: Determination of field of vision,Appareils de protection respiratoire — M
• ISO 16900-14:201563137,IS,,ISO 16900-14:2015,Respiratory protective devices — Methods of test and test equipment — Part 14: Measurement of sound level,Appareils de protection respiratoire — Méthode
• ISO 16916:200432499,IS,,ISO 16916:2004,Tools for moulding — Tool specification sheet for injection moulds,Outillage de moulage — Formulaire de spécifications d'outils pour moules d'injection,200

← records 16,001–16,400 · All of Withdrawn and superseded ISO standards · records 16,801 on →