Records 5,201–5,600 — Withdrawn and superseded ISO standards

Records 5,201 to 5,600 of 24,640. Each links to its own page, which carries the source URL and the quoted line that states the value.

• ISO 4094:200541363,IS,,ISO 4094:2005,"Paper, board and pulps — International calibration of testing apparatus — Nomination and acceptance of standardizing and authorized laboratories","Papiers,
• ISO 4095:19789832,IS,,ISO 4095:1978,Fasteners for aerospace construction — Bi-hexagonal wrenching configuration,Éléments de fixation pour constructions aérospatiales — Entraînement bihexagonal,
• ISO 4097:19809835,IS,,ISO 4097:1980,"Rubber, ethylene-propylene-diene (EPDM) — Non-oil extended raw general purpose types — Evaluation procedures",Caoutchouc éthylène-propylène-diène (EPDM) — T
• ISO 4097:19889836,IS,,ISO 4097:1988,"Rubber, ethylene-propylene-diene (EPDM) — Non-oil-extended general purpose types — Evaluation procedure",Caoutchouc éthylène-propylène-diène (EPDM) — Types
• ISO 4097:19919837,IS,,ISO 4097:1991,"Rubber, ethylene-propylene-diene (EPDM) — General purpose types — Evaluation procedure",Caoutchouc éthylène-propylène-diène (EPDM) — Types à usage général —
• ISO 4097:200029381,IS,,ISO 4097:2000,"Rubber, ethylene-propylene-diene (EPDM) — Evaluation procedure",Caoutchouc éthylène-propylène-diène (EPDM) — Méthode d'évaluation,2000-12-21,4,['83.060'],I
• ISO 4097:200744306,IS,,ISO 4097:2007,"Rubber, ethylene-propylene-diene (EPDM) — Evaluation procedure",Caoutchouc éthylène-propylène-diène (EPDM) — Méthode d'évaluation,2007-07-10,5,['83.060'],I
• ISO 4097:201461853,IS,,ISO 4097:2014,"Rubber, ethylene-propylene-diene (EPDM) — Evaluation procedure",Caoutchouc éthylène-propylène-diène (EPDM) — Méthode d'évaluation,2014-09-22,6,['83.060'],I
• ISO 4098:200631307,IS,,ISO 4098:2006,"Leather — Chemical tests — Determination of water-soluble matter, water-soluble inorganic matter and water-soluble organic matter","Cuir — Essais chimiques
• ISO 4099:19789839,IS,,ISO 4099:1978,Cheese — Determination of nitrate and nitrite contents — Method by cadmium reduction and photometry,Fromages — Détermination des teneurs en nitrates et en ni
• ISO 4099:19849840,IS,,ISO 4099:1984,Cheese — Determination of nitrate and nitrite contents — Method by cadmium reduction and photometry,Fromages — Détermination des teneurs en nitrates et en ni
• ISO 4104:19849845,IS,,ISO 4104:1984,Dental zinc polycarboxylate cements,Ciments dentaires au polycarboxylate de zinc,1984-10-01,1,['11.060.10'],ISO/TC 106/SC 1,9599,,[17800],"['en','fr']",9
• ISO 4106:19789847,IS,,ISO 4106:1978,Road vehicles — Motorcycles — Engine test code — Net power,Véhicules routiers — Motocycles — Code d'essai des moteurs — Puissance nette,1978-09-01,1,['43.140
• ISO 4106:19939848,IS,,ISO 4106:1993,Motorcycles — Engine test code — Net power,Motocycles — Code d'essai des moteurs — Puissance nette,1993-05-13,2,['43.140'],ISO/TC 22,9599,[9847],[31406],"['e
• ISO 4106:200431406,IS,,ISO 4106:2004,Motorcycles — Engine test code — Net power,Motocycles — Code d'essai des moteurs — Puissance nette,2004-08-09,3,['43.140'],ISO/TC 22,9599,[9848],[55363],['e
• ISO 4106:201255363,IS,,ISO 4106:2012,Motorcycles — Engine test code — Net power,Motocycles — Code d'essai des moteurs — Puissance nette,2012-05-21,4,['43.140'],ISO/TC 22/SC 38,9599,[31406],[899
• ISO 4107:19799849,IS,,ISO 4107:1979,Road vehicles — Wheels for commercial vehicles — Dimensional characteristics of attachment on hub,Véhicules routiers — Roues pour véhicules utilitaires — Car
• ISO 4107:19959850,IS,,ISO 4107:1995,Commercial vehicles — Wheel hub attachment dimensions,Véhicules utilitaires — Caractéristiques dimensionnelles de la fixation de la roue sur le moyeu,1995-02
• ISO 4107:199825757,IS,,ISO 4107:1998,Commercial vehicles — Wheel hub attachment dimensions,Véhicules utilitaires — Caractéristiques dimensionnelles de la fixation de la roue sur le moyeu,1998-0
• ISO 4107:201051392,IS,,ISO 4107:2010,Commercial vehicles — Wheel-hub attachment dimensions,Véhicules utilitaires — Caractéristiques dimensionnelles de la fixation de la roue sur le moyeu,2010-0
• ISO 4108:19809851,IS,,ISO 4108:1980,Concrete — Determination of tensile splitting strength of test specimens,Béton — Détermination de la résistance à la traction par fendage des éprouvettes,198
• ISO 4109:19809852,IS,,ISO 4109:1980,Fresh concrete — Determination of the consistency — Slump test,Béton frais — Détermination de la consistance — Essai d'affaissement,1980-02-01,1,['91.100.30'
• ISO 4110:19799853,IS,,ISO 4110:1979,Fresh concrete — Determination of the consistency — Vebe test,Béton frais — Détermination de la consistance — Essai Vébé,1979-12-01,1,['91.100.30'],ISO/TC 71
• ISO 4111:19799854,IS,,ISO 4111:1979,Fresh concrete — Determination of consistency — Degree of compactibility (Compaction index),Béton frais — Détermination de la consistance — Degré de compacta
• ISO 4112:19799855,IS,,ISO 4112:1979,Cereals and pulses — Measurement of the temperature of grain stored in silos,Céréales et légumineuses — Mesurage de la température des grains entreposés en s
• ISO 4112:19909856,IS,,ISO 4112:1990,Cereals and pulses — Guidance on measurement of the temperature of grain stored in bulk,Céréales et légumineuses — Directives générales pour le mesurage de l
• ISO 4113:19889858,IS,,ISO 4113:1988,Road vehicles — Calibration fluid for diesel injection equipment,Véhicules routiers — Fluide d'essai pour équipements d'injection à gazole,1988-11-10,2,['43.
• ISO 4115:19809861,IS,,ISO 4115:1980,Air-land cargo pallet nets — Specification and testing,Filets de palettes pour le transport aérien et de surface — Spécification et essais,1980-10-01,1,['55.
• ISO 4115:19879862,IS,,ISO 4115:1987,Air cargo equipment — Air/land pallet nets,Équipement pour le fret aérien — Filets de palettes pour transport aérien et de surface,1987-05-14,2,['55.180.30']
• ISO 4116:19809863,IS,,ISO 4116:1980,Ground equipment requirements for compatibility with aircraft unit load devices,Caractéristiques de l'équipement au sol en vue d'assurer sa compatibilité ave
• ISO 4117:19809865,IS,,ISO 4117:1980,Air and air-land cargo pallets — Specification and testing,Palettes pour le transport aérien et de surface — Spécification et essais,1980-10-01,1,['55.180.30
• ISO 4118:19809867,IS,,ISO 4118:1980,Non-certified lower deck containers for air transport — Specification and testing,Conteneurs non certifiés de soutes inférieures d'aéronefs de grande capacit
• ISO 4118:19969868,IS,,ISO 4118:1996,Non-certified lower-deck containers for air transport — Specification and testing,Conteneurs non certifiés de pont inférieur d'aéronefs — Spécification et es
• ISO 4118:1996/Cor 1:199931672,IS,Cor,ISO 4118:1996/Cor 1:1999,Non-certified lower-deck containers for air transport — Specification and testing — Technical Corrigendum 1,Conteneurs non certifiés de pont i
• ISO 4118:200537209,IS,,ISO 4118:2005,Air cargo — Non-certified containers for the lower deck of large-capacity aircraft — Specification and testing,Fret aérien — Conteneurs non certifiés de pon
• ISO 4119:19789869,IS,,ISO 4119:1978,Pulps — Determination of stock concentration (Rapid method),Pâtes — Détermination de la concentration en pâte (Méthode rapide),1978-11-01,1,['85.040'],ISO/TC
• ISO 4120:19839870,IS,,ISO 4120:1983,Sensory analysis — Methodology — Triangular test,Analyse sensorielle — Méthodologie — Essai triangulaire,1983-11-01,1,['67.240'],ISO/TC 34/SC 12,9599,,"[2131
• ISO 4120:200433495,IS,,ISO 4120:2004,Sensory analysis — Methodology — Triangle test,Analyse sensorielle — Méthodologie — Essai triangulaire,2004-06-23,2,['67.240'],ISO/TC 34/SC 12,9599,[9870],[
• ISO 4121:19879871,IS,,ISO 4121:1987,Sensory analysis — Methodology — Evaluation of food products by methods using scales,Analyse sensorielle — Méthodologie — Évaluation des produits alimentaire
• ISO 4125:19799876,IS,,ISO 4125:1979,Dry fruits and dried fruits — Definitions and nomenclature,Fruits secs et fruits déshydratés — Définitions et nomenclature,1979-12-01,1,"['67.080.10','01.040
• ISO 4126-1:19919879,IS,,ISO 4126-1:1991,Safety valves — Part 1: General requirements,Soupapes de sûreté — Partie 1: Prescriptions générales,1991-12-12,1,['13.240'],ISO/TC 185,9599,[9878],"[35889,
• ISO 4126-1:200435889,IS,,ISO 4126-1:2004,Safety devices for protection against excessive pressure — Part 1: Safety valves,Dispositifs de sécurité pour protection contre les pressions excessives —
• ISO 4126-1:2004/Cor 1:200746467,IS,Cor,ISO 4126-1:2004/Cor 1:2007,Safety devices for protection against excessive pressure — Part 1: Safety valves — Technical Corrigendum 1,Dispositifs de sécurité pour prot
• ISO 4126-2:200334605,IS,,ISO 4126-2:2003,Safety devices for protection against excessive pressure — Part 2: Bursting disc safety devices,Dispositifs de sécurité pour protection contre les pressio
• ISO 4126-3:200634203,IS,,ISO 4126-3:2006,Safety devices for protection against excessive pressure — Part 3: Safety valves and bursting disc safety devices in combination,Dispositifs de sécurité p
• ISO 4126-4:200435405,IS,,ISO 4126-4:2004,Safety devices for protection against excessive pressure — Part 4: Pilot-operated safety valves,Dispositifs de sécurité pour protection contre les pressio
• ISO 4126-4:2004/Cor 1:200746466,IS,Cor,ISO 4126-4:2004/Cor 1:2007,Safety devices for protection against excessive pressure — Part 4: Pilot-operated safety valves — Technical Corrigendum 1,Dispositifs de séc
• ISO 4126-5:200434204,IS,,ISO 4126-5:2004,Safety devices for protection against excessive pressure — Part 5: Controlled safety pressure relief systems (CSPRS),Dispositifs de sécurité pour protecti
• ISO 4126-5:2004/Cor 1:200644813,IS,Cor,ISO 4126-5:2004/Cor 1:2006,Safety devices for protection against excessive pressure — Part 5: Controlled safety pressure relief systems (CSPRS) — Technical Corrigendum
• ISO 4126-5:2004/Cor 2:200746465,IS,Cor,ISO 4126-5:2004/Cor 2:2007,Safety devices for protection against excessive pressure — Part 5: Controlled safety pressure relief systems (CSPRS) — Technical Corrigendum
• ISO 4126-6:200334205,IS,,ISO 4126-6:2003,"Safety devices for protection against excessive pressure — Part 6: Application, selection and installation of bursting disc safety devices","Dispositifs
• ISO 4126-7:200434206,IS,,ISO 4126-7:2004,Safety devices for protection against excessive pressure — Part 7: Common data,Dispositifs de sécurité pour protection contre les pressions excessives — P
• ISO 4126-7:2004/Cor 1:200644814,IS,Cor,ISO 4126-7:2004/Cor 1:2006,Safety devices for protection against excessive pressure — Part 7: Common data — Technical Corrigendum 1,Dispositifs de sécurité pour protec
• ISO 4126-10:201045959,IS,,ISO 4126-10:2010,Safety devices for protection against excessive pressure — Part 10: Sizing of safety valves for gas/liquid two-phase flow,Dispositifs de sécurité pour pr
• ISO 4126:19819878,IS,,ISO 4126:1981,Safety valves — General requirements,Soupapes de sûreté — Prescriptions générales,1981-04-01,2,['13.240'],ISO/TC 153,9599,,[9879],"['en','fr']",9
• ISO 4129:19789884,IS,,ISO 4129:1978,"Road vehicles — Mopeds — Symbols for controls, indicators and tell-tales","Véhicules routiers — Cyclomoteurs — Symboles pour les commandes, indicateurs et t
• ISO 4129:19909885,IS,,ISO 4129:1990,"Mopeds — Symbols for controls, indicators and tell-tales","Cyclomoteurs — Symboles pour les commandes, indicateurs et témoins",1990-09-20,2,"['43.140','01.0
• ISO 4134:19789890,IS,,ISO 4134:1978,Meat and meat products — Determination of L-(+)- glutamic acid content — Reference method,Viandes et produits à base de viande — Détermination de la teneur e
• ISO 4134:199924603,IS,,ISO 4134:1999,Meat and meat products — Determination of L-(+)- glutamic acid content — Reference method,Viande et produits à base de viande — Détermination de la teneur e
• ISO 4135:19799891,IS,,ISO 4135:1979,Anaesthesiology — Vocabulary,Anesthésie — Vocabulaire,1979-09-01,1,"['11.040.10','01.040.11']",ISO/TC 121/SC 4,9599,,[9892],"['en','fr']",17
• ISO 4135:1979/Amd 1:19869893,IS,Amd,ISO 4135:1979/Amd 1:1986,Anaesthesiology — Vocabulary — Amendment 1,Anesthésie — Vocabulaire — Amendement 1,1986-02-06,1,"['11.040.10','01.040.11']",ISO/TC 121/SC 4,959
• ISO 4135:19959892,IS,,ISO 4135:1995,Anaesthesiology — Vocabulary,Anesthésie — Vocabulaire,1995-07-13,2,"['11.040.10','01.040.11']",ISO/TC 121/SC 4,9599,"[9893,9891]",[27375],"['en','fr']",51
• ISO 4135:200127375,IS,,ISO 4135:2001,Anaesthetic and respiratory equipment — Vocabulary,Matériel d'anesthésie et de réanimation respiratoire — Vocabulaire,2001-08-02,3,"['11.040.10','01.040.11'
• ISO 4136:19899894,IS,,ISO 4136:1989,Fusion-welded butt joints in steel — Transverse tensile test,Joints soudés bout à bout par fusion dans l'acier — Essai de traction transversale,1989-07-20,1,
• ISO 4136:200132828,IS,,ISO 4136:2001,Destructive tests on welds in metallic materials — Transverse tensile test,Essais destructifs des soudures sur matériaux métalliques — Essai de traction tra
• ISO 4136:201262317,IS,,ISO 4136:2012,Destructive tests on welds in metallic materials — Transverse tensile test,Essais destructifs des soudures sur matériaux métalliques — Essai de traction tra
• ISO 4138:19829897,IS,,ISO 4138:1982,Road vehicles — Steady-state circular test procedure,Véhicules routiers — Méthode d'essai en régime permanent sur trajectoire circulaire,1982-08-01,1,['43.02
• ISO 4138:199621461,IS,,ISO 4138:1996,Passenger cars — Steady-state circular driving behaviour — Open-loop test procedure,Voitures particulières — Tenue de route en régime permanent sur trajecto
• ISO 4138:200430084,IS,,ISO 4138:2004,Passenger cars — Steady-state circular driving behaviour — Open-loop test methods,Voitures particulières — Tenue de route en régime permanent sur trajectoir
• ISO 4138:201254143,IS,,ISO 4138:2012,Passenger cars — Steady-state circular driving behaviour — Open-loop test methods,Voitures particulières — Tenue de route en régime permanent sur trajectoir
• ISO 4141-1:199825756,IS,,ISO 4141-1:1998,Road vehicles — Multi-core connecting cables — Part 1: Test methods and requirements for basic performance sheathed cables,Véhicules routiers — Câbles de
• ISO 4141-1:200536606,IS,,ISO 4141-1:2005,Road vehicles — Multi-core connecting cables — Part 1: Test methods and requirements for basic performance sheathed cables,Véhicules routiers — Câbles de
• ISO 4141-2:199825755,IS,,ISO 4141-2:1998,Road vehicles — Multi-core connecting cables — Part 2: Test methods and requirements for high performance sheathed cables,Véhicules routiers — Câbles de r
• ISO 4141-2:200639514,IS,,ISO 4141-2:2006,Road vehicles — Multi-core connecting cables — Part 2: Test methods and requirements for high performance sheathed cables,Véhicules routiers — Câbles de r
• ISO 4141-3:199825754,IS,,ISO 4141-3:1998,"Road vehicles — Multi-core connecting cables — Part 3: Construction, dimensions and marking of unscreened sheathed low-voltage cables","Véhicules routier
• ISO 4141-3:1998/Cor 1:199930770,IS,Cor,ISO 4141-3:1998/Cor 1:1999,"Road vehicles — Multi-core connecting cables — Part 3: Construction, dimensions and marking of unscreened sheathed low-voltage cables — Tec
• ISO 4141-3:200639515,IS,,ISO 4141-3:2006,"Road vehicles — Multi-core connecting cables — Part 3: Construction, dimensions and marking of unscreened sheathed low-voltage cables","Véhicules routier
• ISO 4141-4:200129887,IS,,ISO 4141-4:2001,Road vehicles — Multi-core connecting cables — Part 4: Articulation test method and requirements for coiled cable assemblies,Véhicules routiers — Câbles d
• ISO 4141:19789900,IS,,ISO 4141:1978,Road vehicles — Seven-core connecting cable,Véhicules routiers — Câble de jonction à sept conducteurs,1978-12-01,1,['43.040.10'],ISO/TC 22,9599,,[9901],"['en
• ISO 4141:19889901,IS,,ISO 4141:1988,Road vehicles — Seven-core connecting cables,Véhicules routiers — Câbles de jonction à sept conducteurs,1988-01-21,2,['43.040.10'],ISO/TC 22,9599,[9900],"[25
• ISO 4142:19979902,IS,,ISO 4142:1997,Laboratory glassware — Test tubes and culture tubes,Verrerie de laboratoire — Tubes à essais et tubes à culture,1997-01-30,1,['71.040.20'],ISO/TC 48,9599,,[3
• ISO 4144:19799904,IS,,ISO 4144:1979,Stainless steel fittings threaded to with ISO 7-1,"Raccords en acier inoxydable, filetés suivant à l'ISO 7-1",1979-09-01,1,['23.040.40'],ISO/TC 5/SC 5,9599,,
• ISO 4145:19799905,IS,,ISO 4145:1979,Non-alloy steel fittings threaded to ISO 7/1,"Raccords en acier non allié, filetés suivant ISO 7/1",1979-09-01,1,['23.040.40'],ISO/TC 5,9599,,[9906],"['en','
• ISO 4146:19809907,IS,,ISO 4146:1980,Shipbuilding — Inland vessels — Manholes,Construction navale — Bateaux de navigation intérieure — Trous d'homme,1980-05-01,1,['47.060'],ISO/TC 8/SC 7,9599,,[
• ISO 4147:19839908,IS,,ISO 4147:1983,Metric fasteners for aerospace construction — Hexagon slotted (castellated) nuts — Strength classification 1 100 MPa — Maximum operating temperature 235 degr
• ISO 4148:19789910,IS,,ISO 4148:1978,Road vehicles — Special warning lights — Dimensions,Véhicules routiers — Feux spéciaux d'alarme — Dimensions,1978-11-01,1,['43.040.20'],ISO/TC 22,9599,,[9911
• ISO 4148:19889911,IS,,ISO 4148:1988,Road vehicles — Special warning lamps — Dimensions,Véhicules routiers — Feux spéciaux d'avertissement — Dimensions,1988-10-27,2,['43.040.20'],ISO/TC 22,9599,
• ISO 4148:199823864,IS,,ISO 4148:1998,Road vehicles — Special warning lamps — Dimensions,Véhicules routiers — Feux spéciaux d'avertissement — Dimensions,1998-04-02,3,['43.040.20'],ISO/TC 22,9599
• ISO 4149:19809912,IS,,ISO 4149:1980,Green coffee — Olfactory and visual examination and determination of foreign matter and defects,"Café vert — Examens olfactif et visuel, et détermination des
• ISO 4149:200535894,IS,,ISO 4149:2005,Green coffee — Olfactory and visual examination and determination of foreign matter and defects,"Café vert — Examens olfactif et visuel, et détermination de
• ISO 4150:19809913,IS,,ISO 4150:1980,Green coffee — Size analysis — Manual sieving,Café vert — Analyse granulométrique — Tamisage manuel,1980-08-01,1,['67.140.20'],ISO/TC 34/SC 15,9599,,[9914],
• ISO 4150:19919914,IS,,ISO 4150:1991,Green coffee — Size analysis — Manual sieving,Café vert — Analyse granulométrique — Tamisage manuel,1991-06-27,2,['67.140.20'],ISO/TC 34/SC 15,9599,[9913],"[
• ISO 4151:19789915,IS,,ISO 4151:1978,"Road vehicles — Mopeds — Type, location and functions of controls","Véhicules routiers — Cyclomoteurs — Type, positionnement des commandes et leurs fonction
• ISO 4156-1:200536497,IS,,ISO 4156-1:2005,"Straight cylindrical involute splines — Metric module, side fit — Part 1: Generalities","Cannelures cylindriques droites à flancs en développante — Modul
• ISO 4156-2:200536498,IS,,ISO 4156-2:2005,"Straight cylindrical involute splines — Metric module, side fit — Part 2: Dimensions","Cannelures cylindriques droites à flancs en développante — Module
• ISO 4156-2:2005/Cor 1:201158000,IS,Cor,ISO 4156-2:2005/Cor 1:2011,"Straight cylindrical involute splines — Metric module, side fit — Part 2: Dimensions — Technical Corrigendum 1","Cannelures cylindriques dr
• ISO 4156-3:200536499,IS,,ISO 4156-3:2005,"Straight cylindrical involute splines — Metric module, side fit — Part 3: Inspection","Cannelures cylindriques droites à flancs en développante — Module
• ISO 4156:19819921,IS,,ISO 4156:1981,"Straight cylindrical involute splines — Metric module, side fit — Generalities, dimensions and inspection","Cannelures cylindriques droites à flancs en déve
• ISO 4156:1981/Amd 1:19929922,IS,Amd,ISO 4156:1981/Amd 1:1992,"Straight cylindrical involute splines — Metric module, side fit — Generalities, dimensions and inspection — Amendment 1: Section three: Inspec
• ISO 4157-1:19809923,IS,,ISO 4157-1:1980,Building drawings — Part 1: Designation of buildings and parts of buildings,Dessins de bâtiment — Partie 1: Désignation des bâtiments et parties de bâtimen
• ISO 4157-2:19829924,IS,,ISO 4157-2:1982,Technical drawings — Construction drawings — Designation of buildings and parts of buildings — Part 2: Designation of rooms and other areas,Dessins techniq
• ISO 4161:19839928,IS,,ISO 4161:1983,Hexagon nuts with flange — Product grade A,Écrous hexagonaux à embase cylindro-tronconique — Grade A,1983-10-01,1,['21.060.20'],ISO/TC 2,9599,,[9929],"['en',
• ISO 4161:19999929,IS,,ISO 4161:1999,Hexagon nuts with flange — Coarse thread,Écrous hexagonaux à embase cylindro-tronconique — Filetage à pas gros,1999-03-18,2,['21.060.20'],ISO/TC 2/SC 12,9599
• ISO 4162:19909930,IS,,ISO 4162:1990,Hexagon flange bolts — Small series,Vis à tête hexagonale à embase cylindro-tronconique — Série étroite,1990-05-17,1,['21.060.10'],ISO/TC 2/SC 11,9599,,"[564
• ISO 4164:19789932,IS,,ISO 4164:1978,Road vehicles — Mopeds — Engine test code — Net power,Véhicules routiers — Cyclomoteurs — Code d'essai des moteurs — Puissance nette,1978-12-01,1,['43.140'],
• ISO 4165:19799933,IS,,ISO 4165:1979,Road vehicles — Electrical connections — Double-pole connector,Véhicules routiers — Connexions électriques — Prise bipolaire,1979-07-01,1,['43.040.10'],ISO/T
• ISO 4167:19799935,IS,,ISO 4167:1979,Ropes and cordage — Polyolefin agricultural twines,Ficelles agricoles en polyoléfine,1979-10-01,1,['59.080.50'],ISO/TC 38,9599,,[33975],"['en','fr']",5
• ISO 4168:19799936,IS,,ISO 4168:1979,Time measurement instruments — Conditions for carrying out checks on radioluminescent deposits,Instruments horaires — Conditions d'exécution des contrôles de
• ISO 4169:19799937,IS,,ISO 4169:1979,Office machines — Keyboards — Key numbering system and layout charts,Machines de bureau — Claviers — Système de numérotation des touches et grilles de repéra
• ISO 4170:19809938,IS,,ISO 4170:1980,Interline air cargo pallet nets,Filets de palettes pour le transport aérien,1980-10-01,1,['55.180.30'],ISO/TC 20/SC 9,9599,,[9939],"['en','fr']",3
• ISO 4170:19879939,IS,,ISO 4170:1987,Air cargo equipment — Interline pallet nets,Équipement pour le fret aérien — Filets de palettes pour transport aérien,1987-05-07,2,['55.180.30'],ISO/TC 20/SC
• ISO 4171:19809940,IS,,ISO 4171:1980,Interline air cargo pallets,Palettes pour le transport aérien,1980-10-01,1,['55.180.30'],ISO/TC 20/SC 9,9599,,[9941],"['en','fr']",8
• ISO 4172:19819942,IS,,ISO 4172:1981,Building and civil engineering drawings — Drawings for the assembly of prefabricated structures,Dessins de bâtiment et de génie civil — Dessins d'assemblage
• ISO 4172:19919943,IS,,ISO 4172:1991,Technical drawings — Construction drawings — Drawings for the assembly of prefabricated structures,Dessins techniques — Dessins de construction — Dessins d'a
• ISO 4174:19809945,IS,,ISO 4174:1980,Cereals and pulses — Measurement of unit pressure losses due to single-dimension air flow through a batch of grain,Céréales et légumineuses — Mesurage des pe
• ISO 4179:19809949,IS,,ISO 4179:1980,Ductile iron pipes for pressure pipelines — Centrifugal cement mortar lining — General requirements,Tuyaux en fonte ductile pour canalisations avec pression
• ISO 4179:19859950,IS,,ISO 4179:1985,Ductile iron pipes for pressure and non-pressure pipelines — Centrifugal cement mortar lining — General requirements,Tuyaux en fonte ductile pour canalisatio
• ISO 4179:200535244,IS,,ISO 4179:2005,Ductile iron pipes and fittings for pressure and non-pressure pipelines — Cement mortar lining,Tuyaux et raccords en fonte ductile pour canalisations avec e
• ISO 4180-1:19809951,IS,,ISO 4180-1:1980,"Complete, filled transport packages — General rules for the compilation of performance test schedules — Part 1: General principles",Emballages d'expéditio
• ISO 4180-2:19809952,IS,,ISO 4180-2:1980,"Complete, filled transport packages — General rules for the compilation of performance test schedules — Part 2: Quantitative data",Emballages d'expédition
• ISO 4180:200946598,IS,,ISO 4180:2009,"Packaging — Complete, filled transport packages — General rules for the compilation of performance test schedules",Emballages — Emballages d'expédition com
• ISO 4182:19799953,IS,,ISO 4182:1979,Road vehicles — Motor vehicles — Measurement of variation of passing beam inclination as a function of load,Vehicules routiers — Automobiles — Mesurage des v
• ISO 4182:19869954,IS,,ISO 4182:1986,Motor vehicles — Measurement of variations in dipped-beam headlamp angle as a function of load,Automobiles — Mesurage des variations d'inclinaison du faiscea
• ISO 4183:19809955,IS,,ISO 4183:1980,Grooved pulleys for classical and narrow V-belts,Poulies à gorges pour courroies trapézoïdales classiques et étroites,1980-09-01,1,['21.220.10'],ISO/TC 41,95
• ISO 4183:19899956,IS,,ISO 4183:1989,Belt drives — Classical and narrow V-belts — Grooved pulleys (system based on datum width),Transmissions par courroies — Courroies trapézoïdales classiques e
• ISO 4183:199525817,IS,,ISO 4183:1995,Belt drives — Classical and narrow V-belts — Grooved pulleys (system based on datum width),Transmissions par courroies — Courroies trapézoïdales classiques
• ISO 4184:19809957,IS,,ISO 4184:1980,Classical and narrow V-belts — Lengths,Transmissions par courroies — Longueurs,1980-09-01,1,['21.220.10'],ISO/TC 41,9599,"[4447,4485,4722]",[9958],"['en','fr
• ISO 4184:19929958,IS,,ISO 4184:1992,Belt drives — Classical and narrow V-belts — Lengths in datum system,Transmissions par courroies — Courroies trapézoïdales classiques et étroites — Longueurs
• ISO 4190-1:19809962,IS,,ISO 4190-1:1980,"Passenger lift installation — Part 1: Lifts of classes I, II and III","Installation d'ascenseurs — Partie 1: Ascenseurs des classes I, II et III",1980-07-
• ISO 4190-1:19909963,IS,,ISO 4190-1:1990,"Lift installation — Part 1: Lifts of classes I, II and III","Installation d'ascenseurs — Partie 1: Ascenseurs des classes I, II et III",1990-09-20,2,['91.
• ISO 4190-1:19999964,IS,,ISO 4190-1:1999,"Lift (US: Elevator) installation — Part 1: Class I, II, III and VI lifts","Installation d'ascenseurs — Partie 1: Ascenseurs de classes I, II, III et VI",1
• ISO 4190-1:201043194,IS,,ISO 4190-1:2010,"Lift (Elevator) installation — Part 1: Class I, II, III and VI lifts","Installation d'ascenseurs — Partie 1: Ascenseurs des classes I, II, III et VI",201
• ISO 4190-1:2010/Cor 1:201160446,IS,Cor,ISO 4190-1:2010/Cor 1:2011,"Lift (Elevator) installation — Part 1: Class I, II, III and VI lifts — Technical Corrigendum 1","Installation d'ascenseurs — Partie 1: Asce
• ISO 4190-2:19829967,IS,,ISO 4190-2:1982,Passenger lifts and service lifts — Part 2: Lifts of class IV,Ascenseurs et monte-charge — Partie 2: Ascenseurs de classe IV,1982-12-01,1,['91.140.90'],ISO
• ISO 4190-5:19829970,IS,,ISO 4190-5:1982,"Passenger lifts and service lifts — Part 5: Control devices, signals and additional fittings",Ascenseurs et monte-charge — Partie 5: Dispositifs de comman
• ISO 4190-5:19879971,IS,,ISO 4190-5:1987,"Lifts and service lifts (USA: Elevators and dumbwaiters) — Part 5: Control devices, signals and additional fittings",Ascenseurs et monte-charge — Partie 5
• ISO 4190-6:19849972,IS,,ISO 4190-6:1984,Lifts and service lifts (USA : elevators and dumbwaiters) — Part 6: Passenger lifts to be installed in residential buildings — Planning and selection,Ascen
• ISO 4195-1:19879977,IS,,ISO 4195-1:1987,Conveyor belts — Heat resistance — Part 1: Test method,Courroies transporteuses — Résistance à la chaleur — Partie 1: Méthode d'essai,1987-07-30,1,['53.040
• ISO 4195-2:19889978,IS,,ISO 4195-2:1988,Conveyor belts — Heat resistance — Part 2: Specifications,Courroies transporteuses — Résistance à la chaleur — Partie 2: Spécifications,1988-04-14,1,['53.0
• ISO 4195:200738398,IS,,ISO 4195:2007,Conveyor belts with heat-resistant rubber covers — Heat resistance of covers — Requirements and test methods,Courroies transporteuses avec revêtements caout
• ISO 4195:2007/Cor 1:200850981,IS,Cor,ISO 4195:2007/Cor 1:2008,Conveyor belts with heat-resistant rubber covers — Heat resistance of covers — Requirements and test methods — Technical Corrigendum 1,Courroi
• ISO 4195:201261043,IS,,ISO 4195:2012,Conveyor belts with heat-resistant rubber covers — Heat resistance of covers — Requirements and test methods,Courroies transporteuses avec revêtements caout
• ISO 4196:19849979,IS,,ISO 4196:1984,Graphical symbols — Use of arrows,Symboles graphiques — Utilisation des flèches,1984-07-01,1,['01.080.01'],ISO/TC 145,9599,,"[23667,33084]","['en','fr']",5
• ISO 4197:19819980,IS,,ISO 4197:1981,Equipment for working the soil — Hoe blades — Fixing dimensions,Matériel de travail du sol — Lames de bineuse — Dimensions de fixation,1981-05-01,1,['65.060.
• ISO 4200:19859984,IS,,ISO 4200:1985,"Plain end steel tubes, welded and seamless — General tables of dimensions and masses per unit length","Tubes lisses en acier, soudés et sans soudure — Table
• ISO 4202:19789987,IS,,ISO 4202:1978,Reduction sleeves with external 7/24 taper for tools with Morse taper shanks,Douilles de réduction au cône extérieur 7/24 pour outils à queue cône Morse,1978
• ISO 4204:19779989,IS,,ISO 4204:1977,"Countersinks, 90 degrees, with Morse taper shanks and detachable pilots","Outils à chanfreiner à 90 degrés, à queue cône Morse et pilote amovible",1977-02-0
• ISO 4205:19779990,IS,,ISO 4205:1977,"Countersinks, 90 degrees, with parallel shanks and solid pilot","Outils à chanfreiner à 90 degrés, à queue cylindrique et pilote fixe",1977-02-01,1,['25.100
• ISO 4205:19919991,IS,,ISO 4205:1991,"Countersinks, 90 degrees, with parallel shanks and solid pilots","Outils à chanfreiner à 90 degrés, à queue cylindrique et pilote fixe",1991-12-16,2,['25.10
• ISO 4206:19779992,IS,,ISO 4206:1977,Counterbores with parallel shanks and solid pilots,"Outils à lamer, à queue cylindrique et pilote fixe",1977-02-01,1,['25.100.30'],ISO/TC 29,9599,,[9993],"['
• ISO 4206:19919993,IS,,ISO 4206:1991,Counterbores with parallel shanks and solid pilots,"Outils à lamer, à queue cylindrique et pilote fixe",1991-12-16,2,['25.100.30'],ISO/TC 29/SC 9,9599,[9992]
• ISO 4207:19779994,IS,,ISO 4207:1977,Counterbores with Morse taper shanks and detachable pilots,Outils à lamer à queue cône Morse et pilote amovible,1977-02-01,1,['25.060.20'],ISO/TC 29/SC 9,959
• ISO 4209-1:19869996,IS,,ISO 4209-1:1986,Truck and bus tyres and rims (metric series) — Part 1: Tyres,Pneumatiques et jantes pour véhicules utilitaires (séries millimétriques) — Partie 1: Pneumati
• ISO 4209-1:19889997,IS,,ISO 4209-1:1988,Truck and bus tyres and rims (metric series) — Part 1: Tyres,Pneumatiques et jantes pour véhicules utilitaires (séries millimétriques) — Partie 1: Pneumati
• ISO 4209-1:19939998,IS,,ISO 4209-1:1993,Truck and bus tyres and rims (metric series) — Part 1: Tyres,Pneumatiques et jantes (séries millimétriques) pour camions et autobus — Partie 1: Pneumatique
• ISO 4209-2:198710000,IS,,ISO 4209-2:1987,Truck and bus tyres and rims (metric series) — Part 2: Rims,Pneumatiques et jantes pour véhicules utilitaires (séries millimétriques) — Partie 2: Jantes,1
• ISO 4209-2:199310001,IS,,ISO 4209-2:1993,Truck and bus tyres and rims (metric series) — Part 2: Rims,Pneumatiques et jantes (séries millimétriques) pour camions et autobus — Partie 2: Jantes,1993
• ISO 4209-2:200133139,IS,,ISO 4209-2:2001,Truck and bus tyres and rims (metric series) — Part 2: Rims,Pneumatiques et jantes (séries millimétriques) pour camions et autobus — Partie 2: Jantes,2001
• ISO 4209-2:201251503,IS,,ISO 4209-2:2012,Truck and bus tyres and rims (metric series) — Part 2: Rims,Pneumatiques et jantes (séries millimétriques) pour camions et autobus — Partie 2: Jantes,2012
• ISO 4210-1:201459908,IS,,ISO 4210-1:2014,Cycles — Safety requirements for bicycles — Part 1: Terms and definitions,Cycles — Exigences de sécurité des bicyclettes — Partie 1: Termes et définitions
• ISO 4210-2:201459909,IS,,ISO 4210-2:2014,"Cycles — Safety requirements for bicycles — Part 2: Requirements for city and trekking, young adult, mountain and racing bicycles","Cycles — Exigences de
• ISO 4210-2:201568260,IS,,ISO 4210-2:2015,"Cycles — Safety requirements for bicycles — Part 2: Requirements for city and trekking, young adult, mountain and racing bicycles","Cycles — Exigences de
• ISO 4210-3:201459910,IS,,ISO 4210-3:2014,Cycles — Safety requirements for bicycles — Part 3: Common test methods,Cycles — Exigences de sécurité pour les bicyclettes — Partie 3: Méthodes d'essai c
• ISO 4210-4:201459911,IS,,ISO 4210-4:2014,Cycles — Safety requirements for bicycles — Part 4: Braking test methods,Cycles — Exigences de sécurité des bicyclettes — Partie 4: Méthodes d'essai de fr
• ISO 4210-5:201459912,IS,,ISO 4210-5:2014,Cycles — Safety requirements for bicycles — Part 5: Steering test methods,Cycles — Exigences de sécurité des bicyclettes — Partie 5: Méthodes d'essai de g
• ISO 4210-6:201459913,IS,,ISO 4210-6:2014,Cycles — Safety requirements for bicycles — Part 6: Frame and fork test methods,Cycles — Exigences de sécurité des bicyclettes — Partie 6: Méthodes d'essa
• ISO 4210-6:201568261,IS,,ISO 4210-6:2015,Cycles — Safety requirements for bicycles — Part 6: Frame and fork test methods,Cycles — Exigences de sécurité des bicyclettes — Partie 6: Méthodes d'essa
• ISO 4210-7:201459914,IS,,ISO 4210-7:2014,Cycles — Safety requirements for bicycles — Part 7: Wheels and rims test methods,Cycles — Exigences de sécurité des bicyclettes — Partie 7: Méthodes d'ess
• ISO 4210-8:201459915,IS,,ISO 4210-8:2014,Cycles — Safety requirements for bicycles — Part 8: Pedal and drive system test methods,Cycles — Exigences de sécurité des bicyclettes — Partie 8: Méthode
• ISO 4210-9:201459916,IS,,ISO 4210-9:2014,Cycles — Safety requirements for bicycles — Part 9: Saddles and seat-post test methods,Cycles — Exigences de sécurité des bicyclettes — Partie 9: Méthodes
• ISO 4210:198210002,IS,,ISO 4210:1982,Cycles — Safety requirements of bicycles,Cycles — Conditions de sécurité des bicyclettes,1982-01-01,2,['43.150'],ISO/TC 149/SC 1,9599,,"[10004,10003]","['en
• ISO 4210:1982/Amd 1:198410005,IS,Amd,ISO 4210:1982/Amd 1:1984,Cycles — Safety requirements of bicycles — Amendment 1,Cycles — Conditions de sécurité des bicyclettes — Amendement 1,1984-11-01,2,['43.150'],
• ISO 4210:198910003,IS,,ISO 4210:1989,Cycles — Safety requirements of bicycles,Cycles — Conditions de sécurité des bicyclettes,1989-09-28,3,['43.150'],ISO/TC 149/SC 1,9599,"[10005,10002]",[10004
• ISO 4210:199610004,IS,,ISO 4210:1996,Cycles — Safety requirements for bicycles,Cycles — Exigences de sécurité des bicyclettes,1996-11-07,4,['43.150'],ISO/TC 149/SC 1,9599,"[10005,10002,10003]",
• ISO 4211-2:199310007,IS,,ISO 4211-2:1993,Furniture — Tests for surfaces — Part 2: Assessment of resistance to wet heat,Ameublement — Essais des finitions de surface — Partie 2: Évaluation de la r
• ISO 4211-3:199310008,IS,,ISO 4211-3:1993,Furniture — Tests for surface finishes — Part 3: Assessment of resistance to dry heat,Ameublement — Essais des finitions de surface — Partie 3: Évaluation
• ISO 4211:197910006,IS,,ISO 4211:1979,Furniture — Assessment of surface resistance to cold liquids,Ameublement — Évaluation de la résistance des surfaces aux liquides froids,1979-09-01,1,['97.14
• ISO 4217:198710010,IS,,ISO 4217:1987,Codes for the representation of currencies and funds,Codes pour la représentation des monnaies et types de fonds,1987-07-16,3,"['03.060','01.140.30']",ISO/T
• ISO 4217:199010011,IS,,ISO 4217:1990,Codes for the representation of currencies and funds,Codes pour la représentation des monnaies et types des fonds,1990-02-15,4,"['03.060','01.140.30']",ISO/
• ISO 4217:199523132,IS,,ISO 4217:1995,Codes for the representation of currencies and funds,Codes pour la représentation des monnaies et types de fonds,1995-12-27,5,"['03.060','01.140.30']",ISO/T
• ISO 4217:200134749,IS,,ISO 4217:2001,Codes for the representation of currencies and funds,Codes pour la représentation des monnaies et types de fonds,2001-08-30,6,"['03.060','01.140.30']",ISO/T
• ISO 4217:2001/Cor 1:200441270,IS,Cor,ISO 4217:2001/Cor 1:2004,Codes for the representation of currencies and funds — Technical Corrigendum 1,Codes pour la représentation des monnaies et types de fonds — R
• ISO 4217:200846121,IS,,ISO 4217:2008,Codes for the representation of currencies and funds,Codes pour la représentation des monnaies et types de fonds,2008-07-07,7,"['03.060','01.140.30']",ISO/T
• ISO 4217:2008/Cor 1:200852600,IS,Cor,ISO 4217:2008/Cor 1:2008,Codes for the representation of currencies and funds — Technical Corrigendum 1,Codes pour la représentation des monnaies et types de fonds — R
• ISO 4223-1:197810017,IS,,ISO 4223-1:1978,Definitions of some terms used in the tyre industry — Part 1: Pneumatic tyres,Définitions de certains termes utilisés dans l'industrie du pneumatique — Pa
• ISO 4223-1:1978/Amd 1:198210019,IS,Amd,ISO 4223-1:1978/Amd 1:1982,Definitions of some terms used in the tyre industry — Part 1: Pneumatic tyres — Amendment 1,Définitions de certains termes utilisés dans l'i
• ISO 4223-1:198910018,IS,,ISO 4223-1:1989,Definitions of some terms used in the tyre industry — Part 1: Pneumatic tyres,Définitions de certains termes utilisés dans l'industrie du pneumatique — Pa
• ISO 4223-1:1989/Amd 1:199210020,IS,Amd,ISO 4223-1:1989/Amd 1:1992,Definitions of some terms used in the tyre industry — Part 1: Pneumatic tyres — Amendment 1,Définitions de certains termes utilisés dans l'i
• ISO 4223-1:200226928,IS,,ISO 4223-1:2002,Definitions of some terms used in the tyre industry — Part 1: Pneumatic tyres,Définitions de certains termes utilisés dans l'industrie du pneumatique — Pa
• ISO 4223-1:2002/Amd 1:201151115,IS,Amd,ISO 4223-1:2002/Amd 1:2011,Definitions of some terms used in the tyre industry — Part 1: Pneumatic tyres — Amendment 1,Définitions de certains termes utilisés dans l'i
• ISO 4223-2:198310021,IS,,ISO 4223-2:1983,Definitions of some terms used in the tyre industry — Part 2: Solid tyres,Définitions de certains termes utilisés dans l'industrie du pneumatique — Partie
• ISO 4225:198010024,IS,,ISO 4225:1980,Air quality — General aspects — Vocabulary,Qualité de l'air — Aspects généraux — Vocabulaire,1980-12-01,1,"['13.040.01','01.040.13']",ISO/TC 146/SC 4,9599,,
• ISO 4225:199410025,IS,,ISO 4225:1994,Air quality — General aspects — Vocabulary,Qualité de l'air — Aspects généraux — Vocabulaire,1994-03-17,2,"['13.040.01','01.040.13']",ISO/TC 146/SC 4,9599,[
• ISO 4226:198010026,IS,,ISO 4226:1980,Air quality — General aspects — Units of measurement,Qualité de l'air — Aspects généraux — Unités de mesure,1980-02-01,1,"['01.060','13.040.01']",ISO/TC 146
• ISO 4226:199310027,IS,,ISO 4226:1993,Air quality — General aspects — Units of measurement,Qualité de l'air — Aspects généraux — Unités de mesurage,1993-12-02,2,"['01.060','13.040.01']",ISO/TC 1
• ISO 4226:200744994,IS,,ISO 4226:2007,Air quality — General aspects — Units of measurement,Qualité de l'air — Aspects généraux — Unités de mesurage,2007-11-29,3,"['01.060','13.040.01']",ISO/TC 1
• ISO 4229:197710030,IS,,ISO 4229:1977,Assembly tools for screws and nuts — Single-head engineer's wrenches — Gaps from 50 to 120 mm,Outils de manoeuvre pour vis et écrous — Clés à fourche simple
• ISO 4229:200944751,IS,,ISO 4229:2009,Assembly tools for screws and nuts — Single-head engineer's wrenches for lower torque applications — Maximum outside dimensions of heads and test torques,Ou
• ISO 4230:197710031,IS,,ISO 4230:1977,Hand- and machine-operated circular screwing dies for taper pipe threads — R series,"Filières rondes de filetage, à main et à machine, pour filetages gaz co
• ISO 4230:198710032,IS,,ISO 4230:1987,Hand- and machine-operated circular screwing dies for taper pipe threads — R series,"Filières rondes de filetage, à main et à machine, pour filetages coniqu
• ISO 4231:197710033,IS,,ISO 4231:1977,Hand- and machine-operated circular screwing dies for parallel pipe threads — G series,"Filières rondes de filetage, à main et à machine, pour filetages gaz
• ISO 4231:198710034,IS,,ISO 4231:1987,Hand- and machine-operated circular screwing dies for parallel pipe threads - G series,"Filières rondes de filetage, à main et à machine, pour filetages cyl
• ISO 4241:197810039,IS,,ISO 4241:1978,Cinematography — Leaders and run-out trailers for 35 mm and 16 mm release prints — Specifications,Cinématographie — Amorces pour copies d'exploitation de 35
• ISO 4241:198710040,IS,,ISO 4241:1987,Cinematography — Leaders and run-out trailers for 35 mm and 16 mm release prints — Specifications,Cinématographie — Amorces pour copies d'exploitation de 35
• ISO 4241:200134355,IS,,ISO 4241:2001,"Cinematography — Theatre projection leader, trailer and cue marks — Specifications","Cinématographie — Amorces, <<trailer>> et <<cue marks>> pour projecti
• ISO 4241:201363387,IS,,ISO 4241:2013,"Cinematography — Projection leader (time-based), trailer and cue marks — Specifications","Cinématographie — Amorces, <<trailer>> et <<cue marks>> pour pro
• ISO 4246:198410044,IS,,ISO 4246:1984,Cinematography — Vocabulary,Cinématographie — Vocabulaire,1984-02-01,1,"['01.040.37','37.060']",ISO/TC 36,9599,,[10045],"['en','fr','ru']",80
• ISO 4247:197710046,IS,,ISO 4247:1977,Jig bushes and accessories for drilling purposes — Dimensions,Guides de perçage et accessoires — Dimensions,1977-12-01,1,['25.060.20'],ISO/TC 29,9599,,[5088
• ISO 4249-1:197810048,IS,,ISO 4249-1:1978,Motorcycle tyres and rims (Existing series) — Part 1: Tyres,Pneumatiques et jantes pour motocycles (Séries actuelles) — Partie 1: Pneumatiques,1978-03-01,
• ISO 4249-1:1978/Amd 1:198210050,IS,Amd,ISO 4249-1:1978/Amd 1:1982,Motorcycle tyres and rims (Existing series) — Part 1: Tyres — Amendment 1,Pneumatiques et jantes pour motocycles (Séries actuelles) — Partie
• ISO 4249-2:198310051,IS,,ISO 4249-2:1983,Motorcycles tyres and rims (code designated series) — Part 2: Tyre load ratings,Pneumatiques et jantes pour motocycles (Séries dont les dimensions sont dé
• ISO 4249-2:1983/Amd 1:198410053,IS,Amd,ISO 4249-2:1983/Amd 1:1984,Motorcycles tyres and rims (code designated series) — Part 2: Tyre load ratings — Amendment 1,Pneumatiques et jantes pour motocycles (Séries
• ISO 4249-3:198610054,IS,,ISO 4249-3:1986,Motorcycle tyres and rims (Code-designated series) — Part 3: Rims,Pneumatiques et jantes pour motocycles (Séries dont les dimensions sont désignées par de
• ISO 4249-3:1986/Amd 1:198210056,IS,Amd,ISO 4249-3:1986/Amd 1:1982,Motorcycle tyres and rims (Code-designated series) — Part 3: Rims — Amendment 1,Pneumatiques et jantes pour motocycles (Séries dont les dime
• ISO 4249-3:199010055,IS,,ISO 4249-3:1990,Motorcycle tyres and rims (Code-designated series) — Part 3: Rims,Pneumatiques et jantes pour motocycles (Séries dont les dimensions sont désignées par de
• ISO 4249-3:199710057,IS,,ISO 4249-3:1997,Motorcycle tyres and rims (code-designated series) — Part 3: Rims,Pneumatiques et jantes pour motocycles (séries dont les dimensions sont désignées par de
• ISO 4249-3:1997/Amd 1:200134475,IS,Amd,ISO 4249-3:1997/Amd 1:2001,Motorcycle tyres and rims (code-designated series) — Part 3: Rims — Amendment 1,Pneumatiques et jantes pour motocycles (séries dont les dime
• ISO 4249-3:200437789,IS,,ISO 4249-3:2004,Motorcycle tyres and rims (code-designated series) — Part 3: Rims,Pneumatiques et jantes pour motocycles (séries dont les dimensions sont désignées par de
• ISO 4250-1:198810059,IS,,ISO 4250-1:1988,Narrow and wide base off-road tyres and rims — Part 1: Tyre designation and dimensions,Pneumatiques et jantes à base étroite et à base large pour engins d
• ISO 4250-1:1988/Amd 1:199010060,IS,Amd,ISO 4250-1:1988/Amd 1:1990,Narrow and wide base off-road tyres and rims — Part 1: Tyre designation and dimensions — Amendment 1,Pneumatiques et jantes à base étroite e
• ISO 4250-1:199420800,IS,,ISO 4250-1:1994,Earth-mover tyres and rims — Part 1: Tyre designation and dimensions,Pneumatiques et jantes pour engins de terrassement — Partie 1: Désignation et cotes d
• ISO 4250-1:199623722,IS,,ISO 4250-1:1996,Earth-mover tyres and rims — Part 1: Tyre designation and dimensions,Pneumatiques et jantes pour engins de terrassement — Partie 1: Désignation et cotes d
• ISO 4250-1:200639245,IS,,ISO 4250-1:2006,Earth-mover tyres and rims — Part 1: Tyre designation and dimensions,Pneumatiques et jantes pour engins de terrassement — Partie 1: Désignation et cotes d
• ISO 4250-1:201459951,IS,,ISO 4250-1:2014,Earth-mover tyres and rims — Part 1: Tyre designation and dimensions,Pneumatiques et jantes pour engins de terrassement — Partie 1: Désignation et cotes d
• ISO 4250-1:201769614,IS,,ISO 4250-1:2017,Earth-mover tyres and rims — Part 1: Tyre designation and dimensions,Pneumatiques et jantes pour engins de terrassement — Partie 1: Désignation et cotes d
• ISO 4250-2:198710061,IS,,ISO 4250-2:1987,Narrow and wide base off-road tyres and rims — Part 2: Loads and inflation pressures,Pneumatiques et jantes à base étroite et à base large pour engins de
• ISO 4250-2:199110062,IS,,ISO 4250-2:1991,Narrow and wide base off-road tyres and rims — Part 2: Loads and inflation pressures,Pneumatiques et jantes à base étroite et à base large pour engins de
• ISO 4250-2:199520656,IS,,ISO 4250-2:1995,Earth-mover tyres and rims — Part 2: Loads and inflation pressures,Pneumatiques et jantes pour engins de terrassement — Partie 2: Charges et pressions de
• ISO 4250-2:1995/Amd 1:199726722,IS,Amd,ISO 4250-2:1995/Amd 1:1997,Earth-mover tyres and rims — Part 2: Loads and inflation pressures — Amendment 1: Loads and inflation pressures,Pneumatiques et jantes pour
• ISO 4250-2:200639244,IS,,ISO 4250-2:2006,Earth-mover tyres and rims — Part 2: Loads and inflation pressures,Pneumatiques et jantes pour engins de terrassement — Partie 2: Charges et pressions de
• ISO 4250-2:201459950,IS,,ISO 4250-2:2014,Earth-mover tyres and rims — Part 2: Loads and inflation pressures,Pneumatiques et jantes pour engins de terrassement — Partie 2: Charges et pressions de
• ISO 4250-2:201769615,IS,,ISO 4250-2:2017,Earth-mover tyres and rims — Part 2: Loads and inflation pressures,Pneumatiques et jantes pour engins de terrassement — Partie 2: Charges et pressions de
• ISO 4250-3:198710063,IS,,ISO 4250-3:1987,Narrow and wide base off-road tyres and rims — Part 3: Rims,Pneumatiques et jantes à base étroite et à base large pour engins de génie civil — Partie 3: J
• ISO 4250-3:199720655,IS,,ISO 4250-3:1997,Earth-mover tyres and rims — Part 3: Rims,Pneumatiques et jantes pour engins de terrassement — Partie 3: Jantes,1997-10-16,2,['53.100'],ISO/TC 31/SC 6,959
• ISO 4250-3:200639243,IS,,ISO 4250-3:2006,Earth-mover tyres and rims — Part 3: Rims,Pneumatiques et jantes pour engins de terrassement — Partie 3: Jantes,2006-08-16,3,['53.100'],ISO/TC 31/SC 6,959
• ISO 4250-3:201154744,IS,,ISO 4250-3:2011,Earth-mover tyres and rims — Part 3: Rims,Pneumatiques et jantes pour engins de terrassement — Partie 3: Jantes,2011-04-28,4,['53.100'],ISO/TC 31/SC 6,959
• ISO 4251-1:198410064,IS,,ISO 4251-1:1984,Tyres and rims (existing series) for agricultural tractors and machines — Part 1: Tyre designation and dimensions,Pneus et jantes (séries existantes) pour
• ISO 4251-1:198810065,IS,,ISO 4251-1:1988,Tyres and rims (existing series) for agricultural tractors and machines — Part 1: Tyre designation and dimensions,Pneus et jantes (séries existantes) pour
• ISO 4251-1:199210066,IS,,ISO 4251-1:1992,Tyres (ply rating marked series) and rims for agricultural tractors and machines — Part 1: Tyre designation and dimensions,Pneumatiques (série à marquage
• ISO 4251-1:199821444,IS,,ISO 4251-1:1998,"Tyres (ply rating marked series) and rims for agricultural tractors and machines — Part 1: Tyre designation and dimensions, and approved rim contours","P
• ISO 4251-1:200539036,IS,,ISO 4251-1:2005,"Tyres (ply rating marked series) and rims for agricultural tractors and machines — Part 1: Tyre designation and dimensions, and approved rim contours",Pn
• ISO 4251-1:2005/Amd 1:201246489,IS,Amd,ISO 4251-1:2005/Amd 1:2012,"Tyres (ply rating marked series) and rims for agricultural tractors and machines — Part 1: Tyre designation and dimensions, and approved ri
• ISO 4251-1:201763452,IS,,ISO 4251-1:2017,"Tyres (ply rating marked series) and rims for agricultural tractors and machines — Part 1: Tyre designation and dimensions, and approved rim contours",Pn
• ISO 4251-2:198053461,IS,,ISO 4251-2:1980,Tyres and rims (existing series) for agricultural tractors and machines — Part 2: Tyre load ratings,Pneus et jantes (séries existantes) pour tracteurs et
• ISO 4251-2:1980/Add 1:198110069,IS,Add,ISO 4251-2:1980/Add 1:1981,Tyres and rims (existing series) for agricultural tractors and machines — Part 2: Tyre load ratings — Addendum 1,Pneus et jantes (séries exi
• ISO 4251-2:1980/Add 2:198210070,IS,Add,ISO 4251-2:1980/Add 2:1982,Tyres and rims (existing series) for agricultural tractors and machines — Part 2: Tyre load ratings — Addendum 2,Pneus et jantes (séries exi
• ISO 4251-2:198410067,IS,,ISO 4251-2:1984,Tyres and rims (existing series) for agricultural tractors and machines — Part 2: Tyre load ratings,Pneus et jantes (séries existantes) pour tracteurs et
• ISO 4251-2:198710068,IS,,ISO 4251-2:1987,Tyres and rims (existing series) for agricultural tractors and machines — Part 2: Tyre load ratings,Pneus et jantes (séries existantes) pour tracteurs et
• ISO 4251-2:199210071,IS,,ISO 4251-2:1992,Tyres (ply rating marked series) and rims for agricultural tractors and machines — Part 2: Tyre load ratings,Pneumatiques (série à marquage 'ply rating')
• ISO 4251-2:199823123,IS,,ISO 4251-2:1998,Tyres (ply rating marked series) and rims for agricultural tractors and machines — Part 2: Tyre load ratings,Pneumatiques (série à marquage équivalent nap
• ISO 4251-2:200539037,IS,,ISO 4251-2:2005,Tyres (ply rating marked series) and rims for agricultural tractors and machines — Part 2: Tyre load ratings,Pneumatiques (série à marquage 'équivalent na
• ISO 4251-2:2005/Amd 1:201157263,IS,Amd,ISO 4251-2:2005/Amd 1:2011,Tyres (ply rating marked series) and rims for agricultural tractors and machines — Part 2: Tyre load ratings — Amendment 1,Pneumatiques (sér
• ISO 4251-2:201763453,IS,,ISO 4251-2:2017,Tyres (ply rating marked series) and rims for agricultural tractors and machines — Part 2: Tyre load ratings,Pneumatiques (série à marquage équivalent nap
• ISO 4251-3:198010072,IS,,ISO 4251-3:1980,Tyres and rims (Existing series) for agricultural tractors and machines — Part 3: Rims,Pneus et jantes (Séries existantes) pour tracteurs et machines agri
• ISO 4251-3:1980/Amd 1:198210075,IS,Amd,ISO 4251-3:1980/Amd 1:1982,Tyres and rims (Existing series) for agricultural tractors and machines — Part 3: Rims — Amendment 1,Pneus et jantes (Séries existantes) pou
• ISO 4251-3:198510073,IS,,ISO 4251-3:1985,Tyres and rims (existing series) for agricultural tractors and machines — Part 3: Rims,Pneus et jantes (séries existantes) pour tracteurs et machines agri
• ISO 4251-3:199410076,IS,,ISO 4251-3:1994,Tyres (ply rating marked series) and rims for agricultural tractors and machines — Part 3: Rims,Pneumatiques (série à marquage 'ply rating') et jantes pou
• ISO 4251-3:200639038,IS,,ISO 4251-3:2006,Tyres (ply rating marked series) and rims for agricultural tractors and machines — Part 3: Rims,Pneumatiques (série à marquage 'équivalent nappes') et jan
• ISO 4251-4:198010077,IS,,ISO 4251-4:1980,Tyres and rims (Existing series) for agricultural tractors and machines — Part 4: Tyres classification and nomenclature,Pneus et jantes (séries existantes
• ISO 4251-4:199210078,IS,,ISO 4251-4:1992,Tyres (ply rating marked series) and rims for agricultural tractors and machines — Part 4: Tyre classification and nomenclature,Pneumatiques (série à marq
• ISO 4251-5:198810079,IS,,ISO 4251-5:1988,Tyres and rims (existing series) for agricultural tractors and machines — Part 5: Log skidder tyres,Pneus et jantes (séries existantes) pour tracteurs et
• ISO 4251-5:199210080,IS,,ISO 4251-5:1992,Tyres (ply rating marked series) and rims for agricultural tractors and machines — Part 5: Logging and forestry service tyres,Pneumatiques (série à marqua
• ISO 4251-5:1992/Amd 1:199826795,IS,Amd,ISO 4251-5:1992/Amd 1:1998,Tyres (ply rating marked series) and rims for agricultural tractors and machines — Part 5: Logging and forestry service tyres — Amendment 1,
• ISO 4252:198310081,IS,,ISO 4252:1983,"Agricultural tractors — Access, exit and the operator's workplace — Dimensions","Tracteurs agricoles — Accès, sortie et poste de travail du conducteur — Di
• ISO 4252:199210082,IS,,ISO 4252:1992,"Agricultural tractors — Operator's workplace, access and exit — Dimensions","Tracteurs agricoles — Poste de travail de l'opérateur, accès et sortie — Dimen
• ISO 4253:197710083,IS,,ISO 4253:1977,Agricultural tractors — Operator's seating accommodation — Dimensions,Tracteurs agricoles — Poste de conduite pour conducteur assis — Dimensions,1977-07-01,
• ISO 4254-1:198510086,IS,,ISO 4254-1:1985,Tractors and machinery for agriculture and forestry — Technical means for ensuring safety — Part 1: General,Tracteurs et matériels agricoles et forestiers
• ISO 4254-1:198910087,IS,,ISO 4254-1:1989,Tractors and machinery for agriculture and forestry — Technical means for ensuring safety — Part 1: General,Tracteurs et matériels agricoles et forestiers
• ISO 4254-1:1989/Amd 1:199826862,IS,Amd,ISO 4254-1:1989/Amd 1:1998,Tractors and machinery for agriculture and forestry — Technical means for ensuring safety — Part 1: General — Amendment 1,Tracteurs et matér
• ISO 4254-1:200536421,IS,,ISO 4254-1:2005,Agricultural machinery — Safety — Part 1: General requirements,Matériel agricole — Sécurité — Partie 1: Exigences générales,2005-07-27,3,['65.060.01'],ISO
• ISO 4254-1:200850703,IS,,ISO 4254-1:2008,Agricultural machinery — Safety — Part 1: General requirements,Matériel agricole — Sécurité — Partie 1: Exigences générales,2008-04-16,4,['65.060.01'],ISO
• ISO 4254-3:199210089,IS,,ISO 4254-3:1992,Tractors and machinery for agriculture and forestry — Technical means for ensuring safety — Part 3: Tractors,Tracteurs et matériels agricoles et forestier
• ISO 4254-4:199010090,IS,,ISO 4254-4:1990,Tractors and machinery for agriculture and forestry — Technical means for ensuring safety — Part 4: Forestry winches,Tracteurs et matériels agricoles et f
• ISO 4254-5:199210091,IS,,ISO 4254-5:1992,Tractors and machinery for agriculture and forestry — Technical means for ensuring safety — Part 5: Power-driven soil-working equipment,Tracteurs et matér
• ISO 4254-5:200838005,IS,,ISO 4254-5:2008,Agricultural machinery — Safety — Part 5: Power-driven soil-working machines,Matériel agricole — Sécurité — Partie 5: Machines de travail du sol à outils
• ISO 4254-6:199510092,IS,,ISO 4254-6:1995,Tractors and machinery for agriculture and forestry — Technical means for ensuring safety — Part 6: Equipment for crop protection,Tracteurs et matériels a
• ISO 4254-6:200938060,IS,,ISO 4254-6:2009,Agricultural machinery — Safety — Part 6: Sprayers and liquid fertilizer distributors,Matériel agricole — Sécurité — Partie 6: Pulvérisateurs et distribu
• ISO 4254-7:199510093,IS,,ISO 4254-7:1995,"Tractors and machinery for agriculture and forestry — Technical means for ensuring safety — Part 7: Combine harvesters, forage and cotton harvesters","Tr
• ISO 4254-7:200835162,IS,,ISO 4254-7:2008,"Agricultural machinery — Safety — Part 7: Combine harvesters, forage harvesters and cotton harvesters","Matériel agricole — Sécurité — Partie 7: Moissonn
• ISO 4254-8:200944446,IS,,ISO 4254-8:2009,Agricultural machinery — Safety — Part 8: Solid fertilizer distributors,Matériel agricole — Sécurité — Partie 8: Distributeurs d'engrais solides,2009-07-3
• ISO 4254-9:199210095,IS,,ISO 4254-9:1992,"Tractors and machinery for agriculture and forestry — Technical means for ensuring safety — Part 9: Equipment for sowing, planting and distributing ferti
• ISO 4254-9:200844448,IS,,ISO 4254-9:2008,Agricultural machinery — Safety — Part 9: Seed drills,Matériel agricole — Sécurité — Partie 9: Semoirs,2008-10-22,2,['65.060.30'],ISO/TC 23/SC 3,9599,[100
• ISO 4254-13:201253704,IS,,ISO 4254-13:2012,Agricultural machinery — Safety — Part 13: Large rotary mowers,Matériel agricole — Sécurité — Partie 13: Grandes faucheuses rotatives,2012-08-08,1,['65.0
• ISO 4256:197810096,IS,,ISO 4256:1978,Liquefied petroleum gases — Determination of vapour pressure — LPG method,Gaz de pétrole liquéfiés — Détermination de la pression de vapeur — Méthode GPL,19
• ISO 4257:198810097,IS,,ISO 4257:1988,Liquefied petroleum gases — Method of sampling,Gaz de pétrole liquéfiés — Méthode d'échantillonnage,1988-12-29,1,['75.160.30'],ISO/TC 28/SC 2,9599,,[23699],
• ISO 4259-1:201765236,IS,,ISO 4259-1:2017,Petroleum and related products — Precision of measurement methods and results — Part 1: Determination of precision data in relation to methods of test,Pro
• ISO 4259-1:2017/Amd 1:201976099,IS,Amd,ISO 4259-1:2017/Amd 1:2019,Petroleum and related products — Precision of measurement methods and results — Part 1: Determination of precision data in relation to metho
• ISO 4259-1:2017/Amd 2:202080009,IS,Amd,ISO 4259-1:2017/Amd 2:2020,Petroleum and related products — Precision of measurement methods and results — Part 1: Determination of precision data in relation to metho
• ISO 4259-2:201765237,IS,,ISO 4259-2:2017,Petroleum and related products — Precision of measurement methods and results — Part 2: Interpretation and application of precision data in relation to me
• ISO 4259-2:2017/Amd 1:201976399,IS,Amd,ISO 4259-2:2017/Amd 1:2019,Petroleum and related products — Precision of measurement methods and results — Part 2: Interpretation and application of precision data in
• ISO 4259:197910099,IS,,ISO 4259:1979,Petroleum products — Determination and application of precision data in relation to methods of test,Produits pétroliers — Détermination et application des v
• ISO 4259:199210100,IS,,ISO 4259:1992,Petroleum products — Determination and application of precision data in relation to methods of test,Produits pétroliers — Détermination et application des v
• ISO 4259:1992/Cor 1:199322130,IS,Cor,ISO 4259:1992/Cor 1:1993,Petroleum products — Determination and application of precision data in relation to methods of test — Technical Corrigendum 1,Produits pétroli
• ISO 4259:200638211,IS,,ISO 4259:2006,Petroleum products — Determination and application of precision data in relation to methods of test,Produits pétroliers — Détermination et application des v
• ISO 4261:199310102,IS,,ISO 4261:1993,Petroleum products — Fuels (class F) — Specifications of gas turbine fuels for industrial and marine applications,Produits pétroliers — Combustibles (classe
• ISO 4262:197810103,IS,,ISO 4262:1978,Petroleum products — Determination of carbon residue — Ramsbottom method,Produits pétroliers — Détermination du carbone résiduel — Méthode 'Ramsbottom',1978
• ISO 4263-3:200636954,IS,,ISO 4263-3:2006,Petroleum and related products — Determination of the ageing behaviour of inhibited oils and fluids — TOST test — Part 3: Anhydrous procedure for syntheti
• ISO 4263-3:201055896,IS,,ISO 4263-3:2010,Petroleum and related products — Determination of the ageing behaviour of inhibited oils and fluids using the TOST test — Part 3: Anhydrous procedure for
• ISO 4263:198610104,IS,,ISO 4263:1986,Petroleum products — Inhibited mineral oils — Determination of oxidation characteristics,Produits pétroliers — Huiles minérales inhibées — Détermination des
• ISO 4264:199510105,IS,,ISO 4264:1995,Petroleum products — Calculation of cetane index of middle-distillate fuels by the four-variable equation,Produits pétroliers — Calcul de l'indice de cétane
• ISO 4264:200745627,IS,,ISO 4264:2007,Petroleum products — Calculation of cetane index of middle-distillate fuels by the four-variable equation,Produits pétroliers — Calcul de l'indice de cétane
• ISO 4264:2007/Amd 1:201357695,IS,Amd,ISO 4264:2007/Amd 1:2013,Petroleum products — Calculation of cetane index of middle-distillate fuels by the four-variable equation — Amendment 1,Produits pétroliers —
• ISO 4266-1:200227584,IS,,ISO 4266-1:2002,Petroleum and liquid petroleum products — Measurement of level and temperature in storage tanks by automatic methods — Part 1: Measurement of level in atm
• ISO 4266-2:200227585,IS,,ISO 4266-2:2002,Petroleum and liquid petroleum products — Measurement of level and temperature in storage tanks by automatic methods — Part 2: Measurement of level in mar
• ISO 4266-3:200227586,IS,,ISO 4266-3:2002,Petroleum and liquid petroleum products — Measurement of level and temperature in storage tanks by automatic methods — Part 3: Measurement of level in pre
• ISO 4266-4:200227587,IS,,ISO 4266-4:2002,Petroleum and liquid petroleum products — Measurement of level and temperature in storage tanks by automatic methods — Part 4: Measurement of temperature
• ISO 4266-5:200227588,IS,,ISO 4266-5:2002,Petroleum and liquid petroleum products — Measurement of level and temperature in storage tanks by automatic methods — Part 5: Measurement of temperature
• ISO 4266-6:200227589,IS,,ISO 4266-6:2002,Petroleum and liquid petroleum products — Measurement of level and temperature in storage tanks by automatic methods — Part 6: Measurement of temperature
• ISO 4266:199410107,IS,,ISO 4266:1994,Petroleum and liquid petroleum products — Measurement of temperature and level in storage tanks — Automatic methods,Pétrole et produits pétroliers liquides
• ISO 4282:197710122,IS,,ISO 4282:1977,Acid-grade fluorspar — Determination of loss in mass at 105 degrees C,Spaths fluor pour la fabrication de l'acide fluorhydrique — Détermination de la perte
• ISO 4283:197810124,IS,,ISO 4283:1978,Acid-grade fluorspar — Determination of carbonate content — Titrimetric method,Spaths fluor pour la fabrication de l'acide fluorhydrique — Dosage des carbon
• ISO 4283:199010125,IS,,ISO 4283:1990,All grades of fluorspar — Determination of carbonate content — Titrimetric method,Tous les spaths fluor — Dosage des carbonates — Méthode titrimétrique,1990
• ISO 4284:197810127,IS,,ISO 4284:1978,Acid-grade fluorspar — Determination of sulphide content — Iodometric method,Spaths fluor pour la fabrication de l'acide fluorhydrique — Dosage des sulfures
• ISO 4284:198810128,IS,,ISO 4284:1988,Acid-grade and ceramic-grade fluorspar — Determination of sulfide content — Iodometric method,Spaths fluor pour la fabrication de l'acide fluorhydrique et s
• ISO 4287-1:198410131,IS,,ISO 4287-1:1984,Surface roughness — Terminology — Part 1: Surface and its parameters,Rugosité de surface — Terminologie — Partie 1: Surface et ses paramètres,1984-12-01,1
• ISO 4287:199710132,IS,,ISO 4287:1997,"Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters","Spécification géométrique
• ISO 4287:1997/Amd 1:200944475,IS,Amd,ISO 4287:1997/Amd 1:2009,"Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters — Amendment 1:
• ISO 4287:1997/Cor 1:199829874,IS,Cor,ISO 4287:1997/Cor 1:1998,"Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters — Technical Co
• ISO 4287:1997/Cor 2:200541861,IS,Cor,ISO 4287:1997/Cor 2:2005,"Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters — Technical Co
• ISO 4288:198510134,IS,,ISO 4288:1985,Rules and procedures for the measurement of surface roughness using stylus instruments,Règles et procédures pour le mesurage de la rugosité de surface avec
• ISO 4288:19962096,IS,,ISO 4288:1996,Geometrical Product Specifications (GPS) — Surface texture: Profile method — Rules and procedures for the assessment of surface texture,Spécification géométr
• ISO 4288:1996/Cor 1:199829875,IS,Cor,ISO 4288:1996/Cor 1:1998,Geometrical Product Specifications (GPS) — Surface texture: Profile method — Rules and procedures for the assessment of surface texture — Tech
• ISO 4291:198510135,IS,,ISO 4291:1985,Methods for the assessement of departure from roundness — Measurement of variations in radius,Méthodes d'évaluation des écarts de circularité — Mesurage des
• ISO 4292:198510136,IS,,ISO 4292:1985,Methods for the assessment of departure from roundness — Measurement by two- and three-point methods,Méthodes d'évaluation des écarts de circularité — Mesur
• ISO 4294:197810138,IS,,ISO 4294:1978,Manganese ores and concentrates — Determination of copper content — Extraction-photometric and photometric methods,Minerais et concentrés de manganèse — Dos
• ISO 4294:198410139,IS,,ISO 4294:1984,Manganese ores and concentrates — Determination of copper content — Extraction-spectrometric and spectrometric methods,Minerais et concentrés de manganèse —
• ISO 4295:197910140,IS,,ISO 4295:1979,Manganese ores and concentrates — Determination of aluminium content — Photometric and gravimetric methods,Minerais et concentrés de manganèse — Dosage de l
• ISO 4298:197810145,IS,,ISO 4298:1978,Manganese ores and concentrates — Determination of manganese content — Potentiometric method,Minerais et concentrés de manganèse — Dosage du manganèse — Mét
• ISO 4298:198410146,IS,,ISO 4298:1984,Manganese ores and concentrates — Determination of manganese content — Potentiometric method,Minerais et concentrés de manganèse — Dosage du manganèse — Mét
• ISO 4299:198010147,IS,,ISO 4299:1980,Manganese ores — Determination of moisture content,Minerais de manganèse — Détermination de l'humidité,1980-04-01,1,['73.060.20'],ISO/TC 65,9599,,[10148],"[
• ISO 4301-1:198610151,IS,,ISO 4301-1:1986,Cranes and lifting appliances — Classification — Part 1: General,Grues et appareils de levage — Classification — Partie 1: Généralités,1986-06-26,2,['53.0
• ISO 4301-2:198510152,IS,,ISO 4301-2:1985,Lifting appliances — Classification — Part 2: Mobile cranes,Appareils de levage — Classification — Partie 2: Grues mobiles,1985-08-15,1,['53.020.20'],ISO/
• ISO 4301-2:200944187,IS,,ISO 4301-2:2009,Cranes — Classification — Part 2: Mobile cranes,Appareils de levage à charge suspendue — Classification — Partie 2: Grues mobiles,2009-04-21,2,['53.020.20
• ISO 4301-3:199310153,IS,,ISO 4301-3:1993,Cranes — Classification — Part 3: Tower cranes,Appareils de levage à charge suspendue — Classification — Partie 3: Grues à tour,1993-12-09,1,['53.020.20']
• ISO 4301-4:198910154,IS,,ISO 4301-4:1989,Cranes and related equipment — Classification — Part 4: Jib cranes,Grues et équipements correspondants — Classification — Partie 4: Grues à flèche,1989-08
• ISO 4301-5:199110155,IS,,ISO 4301-5:1991,Cranes — Classification — Part 5: Overhead travelling and portal bridge cranes,Appareils de levage à charge suspendue — Classification — Partie 5: Ponts r
• ISO 4301:198010150,IS,,ISO 4301:1980,Lifting appliances — Classification,Appareils de levage — Classification,1980-12-01,1,['53.020.20'],ISO/TC 96,9599,,[10151],"['en','fr']",4
• ISO 4302:198110156,IS,,ISO 4302:1981,Cranes — Wind load assessment,Appareils de levage à charge suspendue - Evaluation des charges dues au vent,1981-05-01,1,['53.020.20'],ISO/TC 96/SC 10,9599,,
• ISO 4305:198110159,IS,,ISO 4305:1981,Mobile cranes — Determination of stability,Grues mobiles — Détermination de la stabilité,1981-05-01,1,['53.020.20'],ISO/TC 96,9599,,[10160],['en'],4
• ISO 4305:199110160,IS,,ISO 4305:1991,Mobile cranes — Determination of stability,Grues mobiles — Détermination de la stabilité,1991-05-09,2,['53.020.20'],ISO/TC 96/SC 6,9599,[10159],[57220],"['e
• ISO 4306-1:198510161,IS,,ISO 4306-1:1985,Lifting appliances — Vocabulary — Part 1: General,Appareils de levage — Vocabulaire — Partie 1: Généralités,1985-05-30,2,"['53.020.20','01.040.53']",ISO/T
• ISO 4306-1:1985/Add 1:198810163,IS,Add,ISO 4306-1:1985/Add 1:1988,Lifting appliances — Vocabulary — Part 1: General — Addendum 1,Appareils de levage — Vocabulaire — Partie 1: Généralités — Additif 1,1988-01
• ISO 4306-1:199010162,IS,,ISO 4306-1:1990,Cranes — Vocabulary — Part 1: General,Appareils de levage à charge suspendue — Vocabulaire — Partie 1: Généralités,1990-03-15,3,"['53.020.20','01.040.53']
• ISO 4306-1:200732457,IS,,ISO 4306-1:2007,Cranes — Vocabulary — Part 1: General,Appareils de levage à charge suspendue — Vocabulaire — Partie 1: Généralités,2007-10-22,4,"['53.020.20','01.040.53']
• ISO 4306-2:198310164,IS,,ISO 4306-2:1983,Lifting appliances — Vocabulary — Part 2: Parameters,Appareils de levage — Vocabulaire — Partie 2: Paramètres,1983-09-01,1,"['53.020.20','01.040.53']",ISO
• ISO 4306-2:198510165,IS,,ISO 4306-2:1985,Lifting appliances — Vocabulary — Part 2: Mobile cranes,Appareils de levage — Vocabulaire — Partie 2: Grues mobiles,1985-05-16,2,"['53.020.20','01.040.53'
• ISO 4306-2:199410166,IS,,ISO 4306-2:1994,Cranes — Vocabulary — Part 2: Mobile cranes,Appareils de levage à charge suspendue — Vocabulaire — Partie 2: Grues mobiles,1994-10-13,3,"['53.020.20','01.
• ISO 4306-3:198310167,IS,,ISO 4306-3:1983,Lifting appliances — Vocabulary — Part 3: General concepts,Appareils de levage — Vocabulaire — Partie 3: Généralités,1983-07-01,1,"['53.020.20','01.040.53
• ISO 4306-3:199110168,IS,,ISO 4306-3:1991,Cranes — Vocabulary — Part 3: Tower cranes,Appareils de levage à charge suspendue — Vocabulaire — Partie 3: Grues à tour,1991-02-14,2,"['53.020.20','01.04
• ISO 4306-3:200326130,IS,,ISO 4306-3:2003,Cranes — Vocabulary — Part 3: Tower cranes,Appareils de levage à charge suspendue — Vocabulaire — Partie 3: Grues à tour,2003-11-27,3,"['53.020.20','01.04
• ISO 4306-3:2003/Amd 1:201155490,IS,Amd,ISO 4306-3:2003/Amd 1:2011,Cranes — Vocabulary — Part 3: Tower cranes — Amendment 1,Appareils de levage à charge suspendue — Vocabulaire — Partie 3: Grues à tour — Ame
• ISO 4308-1:198610172,IS,,ISO 4308-1:1986,Cranes and lifting appliances — Selection of wire ropes — Part 1: General,Grues et appareils de levage — Choix des câbles — Partie 1: Généralités,1986-05-
• ISO 4308-1:200337643,IS,,ISO 4308-1:2003,Cranes and lifting appliances — Selection of wire ropes — Part 1: General,Grues et appareils de levage — Choix des câbles — Partie 1: Généralités,2003-05-
• ISO 4308-2:198810173,IS,,ISO 4308-2:1988,Cranes and lifting appliances — Selection of wire ropes — Part 2: Mobile cranes — Coefficient of utilization,Grues et appareils de levage — Choix des câbl
• ISO 4308:198110171,IS,,ISO 4308:1981,Cranes — Selection of wire ropes,Appareils de levage — Choix des câbles,1981-11-01,1,['53.020.20'],ISO/TC 96,9599,,"[10172,10173]","['en','fr']",6
• ISO 4309:198110174,IS,,ISO 4309:1981,Wire rope for lifting appliances — Code of practice for examination and discard,Câble pour appareils de levage — Critères d'examen et de dépose des câbles,1
• ISO 4309:199010175,IS,,ISO 4309:1990,Cranes — Wire ropes — Code of practice for examination and discard,Appareils de levage à charge suspendue — Câbles — Critères d'examen et de dépose,1990-08-
• ISO 4309:200435095,IS,,ISO 4309:2004,"Cranes — Wire ropes — Care, maintenance, installation, examination and discard","Appareils de levage à charge suspendue — Câbles — Entretien, maintenance,
• ISO 4309:2004/Amd 1:200843598,IS,Amd,ISO 4309:2004/Amd 1:2008,"Cranes — Wire ropes — Care, maintenance, installation, examination and discard — Amendment 1","Appareils de levage à charge suspendue — Câbl
• ISO 4309:201043597,IS,,ISO 4309:2010,"Cranes — Wire ropes — Care and maintenance, inspection and discard","Appareils de levage à charge suspendue — Câbles — Entretien et maintenance, inspection
• ISO 4310:198110176,IS,,ISO 4310:1981,Cranes — Test code and procedures,Appareils de levage — Code et méthodes d'essai,1981-05-01,1,['53.020.20'],ISO/TC 96/SC 4,9599,,"[44279,37000]","['en','fr'
• ISO 4312:197910179,IS,,ISO 4312:1979,Surface active agents — Evaluation of certain effects of laundering — Methods of analysis and test for unsoiled cotton control cloth,Agents de surface — Con
• ISO 4317:197710186,IS,,ISO 4317:1977,Surface active agents — Determination of water content — Karl Fischer method,Agents de surface — Détermination de la teneur en eau — Méthode de Karl Fischer
• ISO 4317:199110187,IS,,ISO 4317:1991,Surface-active agents and detergents — Determination of water content — Karl Fischer method,Agents de surface et détergents — Détermination de la teneur en
• ISO 4318:197810188,IS,,ISO 4318:1978,Surface active agents and soaps — Determination of water content — Azeotropic distillation method,Agents de surface et savons — Détermination de la teneur e
• ISO 4323:197710195,IS,,ISO 4323:1977,Soaps — Determination of chlorides content — Potentiometric method,Savons — Dosage des chlorures — Méthode potentiométrique,1977-09-01,1,['71.100.40'],ISO/T
• ISO 4323:201869740,IS,,ISO 4323:2018,Soaps — Determination of chloride content — Potentiometric method,Savons — Dosage des chlorures — Méthode potentiométrique,2018-12-07,2,['71.100.40'],ISO/TC
• ISO 4325:197710197,IS,,ISO 4325:1977,Soaps and detergents — Determination of EDTA content (sequestering agent) — Titrimetric method,Savons et détergents — Dosage de l'EDTA (agent séquestrant) —
• ISO 4330:197910204,IS,,ISO 4330:1979,Photography — Determination of the curl of photographic film,Photographie — Détermination de l'incurvation des films photographiques,1979-04-01,1,['37.040.2
• ISO 4330:198710205,IS,,ISO 4330:1987,Photography — Determination of the curl of photographic film,Photographie — Détermination de l'incurvation des films photographiques,1987-10-15,2,['37.040.2
• ISO 4330:199420058,IS,,ISO 4330:1994,Photography — Determination of the curl of photographic film and paper,Photographie — Détermination de l'incurvation des films et papiers photographiques,19
• ISO 4331:197710206,IS,,ISO 4331:1977,Photography — Processed photographic film for archival records — Silver-gelatin type on cellulose ester base — Specifications,Photographie — Film photograph
• ISO 4331:198610207,IS,,ISO 4331:1986,Photography — Processed photographic black-and-white film for archival records — Silver-gelatin type on cellulose ester base — Specifications,Photographie —
• ISO 4332:197710208,IS,,ISO 4332:1977,Photography — Processed photographic film for archival records — Silver-gelatin type on poly(ethylene terephthalate) base — Specifications,Photographie — Fi
• ISO 4332:198610209,IS,,ISO 4332:1986,Photography — Processed photographic black-and-white film for archival records — Silver-gelatin type on poly(ethylene terephthalate) base — Specifications,P
• ISO 4335:197953459,IS,,ISO 4335:1979,Information processing systems — Data communication — High-level data link control elements of procedures,Systèmes de traitement de l'information — Communic
• ISO 4335:1979/Add 1:197910212,IS,Add,ISO 4335:1979/Add 1:1979,Information processing systems — Data communication — High-level data link control elements of procedures — Addendum 1,Systèmes de traitement
• ISO 4335:1979/Add 2:198210213,IS,Add,ISO 4335:1979/Add 2:1982,Information processing systems — Data communication — High-level data link control elements of procedures — Addendum 2,Systèmes de traitement
• ISO 4335:198453460,IS,,ISO 4335:1984,Information processing systems — Data communication — High-level data link control elements of procedures,Systèmes de traitement de l'information — Communic
• ISO 4335:198710210,IS,,ISO 4335:1987,Information processing systems — Data communication — High-level data link control elements of procedures,Systèmes de traitement de l'information — Communic
• ISO 4335:1987/Amd 4:199110216,IS,Amd,ISO 4335:1987/Amd 4:1991,Information processing systems — Data communication — High-level data link control elements of procedures — Amendment 4,Systèmes de traitement
• ISO 4343:197810221,IS,,ISO 4343:1978,Numerical control of machines — NC processor output — Minor elements of 2000- type records (Post-processor commands),Commande numérique des machines — Infor
• ISO 4344:198310222,IS,,ISO 4344:1983,Steel wire ropes for lifts,Câbles en acier pour ascenseurs,1983-12-01,1,"['77.140.65','91.140.90']",ISO/TC 105,9599,,[31563],"['en','fr']",4
• ISO 4344:200431563,IS,,ISO 4344:2004,Steel wire ropes for lifts — Minimum requirements,Câbles en acier pour ascenseurs — Exigences minimales,2004-01-19,2,"['77.140.65','91.140.90']",ISO/TC 105,
• ISO 4345:197710223,IS,,ISO 4345:1977,Steel wire ropes — Fibre main cores — Specifications,Câbles en acier — Âmes centrales en textile — Spécifications,1977-08-01,1,['77.140.65'],ISO/TC 105,9599
• ISO 4345:198810224,IS,,ISO 4345:1988,Steel wire ropes — Fibre main cores — Specification,Câbles en acier — Âmes centrales en textile — Spécifications,1988-06-16,2,['77.140.65'],ISO/TC 105,9599,
• ISO 4347:197710226,IS,,ISO 4347:1977,"Leaf chains, clevises and sheaves","Chaînes de levage à mailles jointives, chapes et tourteaux de renvoi",1977-09-01,1,['21.220.30'],ISO/TC 100,9599,,"[102
• ISO 4347:198510227,IS,,ISO 4347:1985,"Leaf chains, clevises and sheaves","Chaînes de levage à mailles jointives, chapes et tourteaux de renvoi",1985-11-21,2,['21.220.30'],ISO/TC 100,9599,[10226
• ISO 4347:199210228,IS,,ISO 4347:1992,"Leaf chains, clevises and sheaves","Chaînes de levage à mailles jointives, chapes et galets de renvoi",1992-08-12,3,['21.220.30'],ISO/TC 100,9599,"[10226,1
• ISO 4347:200435932,IS,,ISO 4347:2004,"Leaf chains, clevises and sheaves — Dimensions, measuring forces and tensile strengths","Chaînes de levage à mailles jointives, chapes et galets de renvoi
• ISO 4354:199710231,IS,,ISO 4354:1997,Wind actions on structures,Actions du vent sur les structures,1997-06-26,1,['91.080.01'],ISO/TC 98/SC 3,9599,,[38882],"['en','fr']",46
• ISO 4355:198110232,IS,,ISO 4355:1981,Bases for design of structures — Determination of snow loads on roofs,Bases du calcul des constructions — Détermination de la charge de neige sur les toitur
• ISO 4355:199820965,IS,,ISO 4355:1998,Bases for design of structures — Determination of snow loads on roofs,Bases du calcul des constructions — Détermination de la charge de neige sur les toitur
• ISO 4356:197710233,IS,,ISO 4356:1977,Bases for the design of structures — Deformations of buildings at the serviceability limit states,Bases du calcul des constructions — Déformations des bâtim
• ISO 4359:198310235,IS,,ISO 4359:1983,"Liquid flow measurement in open channels — Rectangular, trapezoidal and U-shaped flumes","Mesure de débit des liquides dans les canaux découverts — Canaux
• ISO 4359:1983/Cor 1:199932890,IS,Cor,ISO 4359:1983/Cor 1:1999,"Liquid flow measurement in open channels — Rectangular, trapezoidal and U-shaped flumes — Technical Corrigendum 1","Mesure de débit des liqui
• ISO 4359:201351417,IS,,ISO 4359:2013,"Flow measurement structures — Rectangular, trapezoidal and U-shaped flumes","Structures de mesure du débit — Canaux jaugeurs à col rectangulaire, à col tra
• ISO 4359:2013/Amd 1:201771169,IS,Amd,ISO 4359:2013/Amd 1:2017,"Flow measurement structures — Rectangular, trapezoidal and U-shaped flumes — Amendment 1","Structures de mesure du débit — Canaux jaugeurs à
• ISO 4360:197910236,IS,,ISO 4360:1979,Liquid flow measurement in open channels by weirs and flumes — Triangular profile weirs,Mesure de débit des liquides dans les canaux découverts au moyen de
• ISO 4360:198410237,IS,,ISO 4360:1984,Liquid flow measurement in open channels by weirs and flumes — Triangular profile weirs,Mesure de débit des liquides dans les canaux découverts au moyen de

← records 4,801–5,200 · All of Withdrawn and superseded ISO standards · records 5,601 on →