Records 1–400 — Withdrawn and superseded ISO standards

Records 1 to 400 of 24,640. Each links to its own page, which carries the source URL and the quoted line that states the value.

• IEC 559:198219695,IS,,IEC 559:1982,Binary floating point arithmetic for microprocessor systems,Arithmétique binaire en virgule flottante pour systèmes à microprocesseurs,1982-06-01,1,['35.160'
• IEC 559:198919706,IS,,IEC 559:1989,Binary floating-point arithmetic for microprocessor systems,Arithmétique binaire en virgule flottante pour systèmes à microprocesseurs,1989-02-01,2,['35.160'
• IEC 796-1:19905132,IS,,IEC 796-1:1990,Microprocessor system bus — 8-bit and 16-bit data (MULTIBUS I) — Part 1: Functional description with electrical and timing specifications,Bus système à micr
• IEC 796-2:19905133,IS,,IEC 796-2:1990,"Microprocessor system bus — 8-bit and 16-bit data (MULTIBUS I) — Part 2: Mechanical and pin descriptions for the system bus configuration, with edge connec
• IEC 796-3:19905134,IS,,IEC 796-3:1990,"Microprocessor system BUS I, 8-bit and 16-bit data (MULTIBUS I) — Part 3: Mechanical and pin descriptions for the Eurocard configuration with pin and socke
• IEC 821:19875174,IS,,IEC 821:1987,Bus — Microprocessor system bus for 1 to 4 byte data,Bus système à microprocesseurs pour données de 1 à 4 octets,1987-06-01,1,['35.160'],ISO/IEC JTC 1,9599,,[
• IEC 821:19915175,IS,,IEC 821:1991,IEC 821 VMEbus — Microprocessor system bus for 1 byte to 4 byte data,Bus CEI 821 VMEbus — Bus système à microprocesseurs pour données de 1 octet à 4 octets,19
• IEC 822:19885177,IS,,IEC 822:1988,Parallel Sub-system Bus of the IEC 821 VME bus,CEI 822 VSB. Bus parallèle de sous-système du bus CEI 821 VMEbus,1988-06-01,1,['35.160'],ISO/IEC JTC 1/SC 25,95
• IEC 823:19905179,IS,,IEC 823:1990,Microprocessor system bus (VMSbus) — Serial sub-system bus of the IEC 821 Bus (VMEbus),Bus système à microprocesseurs (VMSbus) — Bus sous-système série du Bus
• IEC 824:198819699,IS,,IEC 824:1988,Terminology related to microprocessors,Terminologie relative aux microprocesseurs,1988-03-01,1,"['01.040.35','35.160']",ISO/IEC JTC 1/SC 25,9599,,[82001],"['
• IEC 847:19885221,IS,,IEC 847:1988,Characteristics of local area networks (LAN),Caractéristiques des réseaux locaux (LAN),1988-06-01,1,['35.110'],ISO/IEC JTC 1/SC 25,9599,,[19711],"['en','fr']"
• IEC 948:198819697,IS,,IEC 948:1988,Numeric keyboard for home electronic systems (HES),Clavier numérique pour systèmes électroniques domestiques (SED),1988-06-01,1,"['35.180','35.240.99']",ISO/
• IEC 31010:200951073,IS,,IEC 31010:2009,Risk management — Risk assessment techniques,Gestion des risques — Techniques d'évaluation des risques,2009-12-01,1,['03.100.01'],ISO/TC 262,9599,,[72140],
• IEC 60086-3:201138962,IS,,IEC 60086-3:2011,Primary batteries — Part 3: Watch batteries,Piles électriques — Partie 3: Piles pour montres,2011-01-31,2,"['39.040.10','29.220.10']",ISO/TC 114,9599,,[7
• IEC 60086-3:201671856,IS,,IEC 60086-3:2016,Primary batteries — Part 3: Watch batteries,Piles électriques — Partie 3: Piles pour montres,2016-08-26,3,"['39.040.10','29.220.10']",ISO/TC 114,9599,[38
• IEC 60601-1-8:200337404,IS,,IEC 60601-1-8:2003,"Medical electrical equipment — Part 1-8: General requirements for safety — Collateral standard: General requirements, tests and guidance for alarm sys
• IEC 60601-1-8:2003/Amd 1:200642733,IS,Amd,IEC 60601-1-8:2003/Amd 1:2006,"Medical electrical equipment — Part 1-8: General requirements for safety — Collateral standard: General requirements, tests and guidance
• IEC 60601-1-11:201045605,IS,,IEC 60601-1-11:2010,Medical electrical equipment — Part 1-11: General requirements for basic safety and essential performance — Collateral standard: Requirements for medi
• IEC 60601-1-11:2010/Cor 1:201159719,IS,Cor,IEC 60601-1-11:2010/Cor 1:2011,Medical electrical equipment — Part 1-11: General requirements for basic safety and essential performance — Collateral standard: Require
• IEC 60601-2-12:200123914,IS,,IEC 60601-2-12:2001,Medical electrical equipment — Part 2-12: Particular requirements for the safety of lung ventilators — Critical care ventilators,Appareils électromédi
• IEC 60601-2-13:199816311,IS,,IEC 60601-2-13:1998,Medical electrical equipment — Part 2-13: Particular requirements for the safety of anaesthetic workstations,Appareils électromédicaux — Partie 2-13:
• IEC 60601-2-13:200331657,IS,,IEC 60601-2-13:2003,Medical electrical equipment — Part 2-13: Particular requirements for the safety and essential performance of anaesthetic systems,Appareils électroméd
• IEC 60601-2-13:2003/Amd 1:200643235,IS,Amd,IEC 60601-2-13:2003/Amd 1:2006,Medical electrical equipment — Part 2-13: Particular requirements for the safety and essential performance of anaesthetic systems — Amen
• IEC 60601-2-52:200936067,IS,,IEC 60601-2-52:2009,Medical electrical equipment — Part 2-52: Particular requirements for the basic safety and essential performance of medical beds,Appareils électromédi
• IEC 60601-2-52:2009/Amd 1:201568756,IS,Amd,IEC 60601-2-52:2009/Amd 1:2015,Medical electrical equipment — Part 2-52: Particular requirements for the basic safety and essential performance of medical beds — Amend
• IEC 60601-2-52:2009/Cor 1:201057400,IS,Cor,IEC 60601-2-52:2009/Cor 1:2010,Medical electrical equipment — Part 2-52: Particular requirements for the basic safety and essential performance of medical beds — Techn
• IEC 61340-4-4:200542806,IS,,IEC 61340-4-4:2005,Electrostatics — Part 4-4: Standard test methods for specific applications - Electrostatic classification of flexible intermediate bulk containers (FIB
• IEC 61400-4:201244298,IS,,IEC 61400-4:2012,Wind turbines — Part 4: Design requirements for wind turbine gearboxes,Aérogénérateurs — Partie 4: Exigences de conception des boîtes de vitesses d'aérog
• IEC 62264-1:200335480,IS,,IEC 62264-1:2003,Enterprise-control system integration — Part 1: Models and terminology,Intégration du système de conduite d'entreprise — Partie 1: Modèle et terminologie
• IEC 62264-2:200437892,IS,,IEC 62264-2:2004,Enterprise-control system integration — Part 2: Model object attributes,Intégration des systèmes entreprise-contrôle — Partie 2: Attributs des modèles d'
• IEC 62264-2:201557310,IS,,IEC 62264-2:2015,Enterprise-control system integration — Part 2: Objects and attributes for enterprise-control system integration,Intégration des systèmes entreprise-cont
• IEC 62264-3:200740949,IS,,IEC 62264-3:2007,Enterprise-control system integration — Part 3: Activity models of manufacturing operations management,Intégration du système de commande d'entreprise —
• IEC 62366:200738594,IS,,IEC 62366:2007,Medical devices — Application of usability engineering to medical devices,Dispositifs médicaux — Application de l'ingénierie de l'aptitude à l'utilisation
• IEC 62366:2007/Amd 1:201462780,IS,Amd,IEC 62366:2007/Amd 1:2014,Medical devices — Application of usability engineering to medical devices — Amendment 1,Dispositifs médicaux — Application de l'ingénierie de
• IEC 80000-6:200831891,IS,,IEC 80000-6:2008,Quantities and units — Part 6: Electromagnetism,Grandeurs et unités — Partie 6: Électromagnétisme,2008-04-01,1,['01.060'],ISO/TC 12,9599,"[28977,3635]",[
• IEC 80000-13:200831898,IS,,IEC 80000-13:2008,Quantities and units — Part 13: Information science and technology,Grandeurs et unités — Partie 13: Science et technologies de l'information,2008-04-01,
• IEC 80000-14:200843012,IS,,IEC 80000-14:2008,Quantities and units — Part 14: Telebiometrics related to human physiology,Grandeurs et unités — Partie 14: Télébiométrique relative à la physiologie hu
• IEC 80001-1:201044863,IS,,IEC 80001-1:2010,"Application of risk management for IT-networks incorporating medical devices — Part 1: Roles, responsibilities and activities","Application du managemen
• IEC 80416-1:200133083,IS,,IEC 80416-1:2001,Basic principles for graphical symbols for use on equipment — Part 1: Creation of symbol originals,Principes de base pour les symboles graphiques utilisa
• IEC 80601-2-30:200944105,IS,,IEC 80601-2-30:2009,Medical electrical equipment — Part 2-30: Particular requirements for basic safety and essential performance of automated non-invasive sphygmomanomete
• IEC 80601-2-30:2009/Amd 1:201356661,IS,Amd,IEC 80601-2-30:2009/Amd 1:2013,Medical electrical equipment — Part 2-30: Particular requirements for basic safety and essential performance of automated non-invasive s
• IEC 80601-2-58:200845648,IS,,IEC 80601-2-58:2008,Medical electrical equipment — Part 2-58: Particular requirements for basic safety and essential performance of lens removal devices and vitrectomy de
• IEC 80601-2-58:201462689,IS,,IEC 80601-2-58:2014,Medical electrical equipment — Part 2-58: Particular requirements for basic safety and essential performance of lens removal devices and vitrectomy de
• IEC 80601-2-58:2014/Amd 1:201669469,IS,Amd,IEC 80601-2-58:2014/Amd 1:2016,Medical electrical equipment — Part 2-58: Particular requirements for basic safety and essential performance of lens removal devices and
• IEC 80601-2-59:200846545,IS,,IEC 80601-2-59:2008,Medical electrical equipment — Part 2-59: Particular requirements for basic safety and essential performance of screening thermographs for human febri
• IEC 80601-2-60:201251401,IS,,IEC 80601-2-60:2012,Medical electrical equipment — Part 2-60: Particular requirements for basic safety and essential performance of dental equipment,Appareils électromédi
• IEC 80601-2-71:201561105,IS,,IEC 80601-2-71:2015,Medical electrical equipment — Part 2-71: Particular requirements for the basic safety and essential performance of functional Near-Infrared Spectrosc
• IEC 81346-1:200950857,IS,,IEC 81346-1:2009,"Industrial systems, installations and equipment and industrial products — Structuring principles and reference designations — Part 1: Basic rules","Syst
• IEC 81346-2:200950858,IS,,IEC 81346-2:2009,"Industrial systems, installations and equipment and industrial products — Structuring principles and reference designations — Part 2: Classification of
• IEC 81714-2:199833279,IS,,IEC 81714-2:1998,"Design of graphical symbols for use in the technical documentation of products — Part 2: Specification for graphical symbols in a computer sensible form
• IEC 81714-3:199833281,IS,,IEC 81714-3:1998,"Design of graphical symbols for use in the technical documentation of products — Part 3: Classification of connect nodes, networks and their encoding",C
• IEC 82079-1:201255833,IS,,IEC 82079-1:2012,"Preparation of instructions for use — Structuring, content and presentation — Part 1: General principles and detailed requirements","Établissement des i
• IEC/PAS 60092-510:200953587,PAS,,IEC/PAS 60092-510:2009,Electrical installations in ships — Special features — High Voltage Shore Connection Systems (HVSC-Systems) — Part 510:,Titre manque — Partie 510:
• IEC/PAS 80005-3:201464718,PAS,,IEC/PAS 80005-3:2014,Utility connections in port — Part 3: Low Voltage Shore Connection (LVSC) Systems — General requirements,Alimentation des navires à quai — Partie 3:
• IEC/TR 828:19885187,TR,,IEC/TR 828:1988,Pin allocations for future microprocessor systems using the IEC 603-2 connector,Allocation des broches de connecteurs pour les systèmes à microprocesseurs
• IEC/TR 907:198919696,TR,,IEC/TR 907:1989,Local area networks CSMA/CD 10 Mbit/s baseband planning and installation guide,Guide d'étude et d'installation des réseaux locaux du type CSMA/CD à bande
• IEC/TR 80001-2-2:201257939,TR,,IEC/TR 80001-2-2:2012,"Application of risk management for IT-networks incorporating medical devices — Part 2-2: Guidance for the communication of medical device security
• IEC/TR 80001-2-8:201664635,TR,,IEC/TR 80001-2-8:2016,Application of risk management for IT-networks incorporating medical devices — Part 2-8: Application guidance — Guidance on standards for establishi
• ISO 1:19753561,IS,,ISO 1:1975,Standard reference temperature for industrial length measurements,Température normale de référence des mesures industrielles de longueur,1975-04-01,1,['17.040.1
• ISO 1:200228086,IS,,ISO 1:2002,Geometrical Product Specifications (GPS) — Standard reference temperature for geometrical product specification and verification,Spécification géométrique des
• ISO 1:201667630,IS,,ISO 1:2016,Geometrical product specifications (GPS) — Standard reference temperature for the specification of geometrical and dimensional properties,Spécification géométr
• ISO 4:19723567,IS,,ISO 4:1972,Documentation — International code for the abbreviation of titles of periodicals,Documentation — Code international pour l'abréviation des titres de périodiques
• ISO 4:19843568,IS,,ISO 4:1984,Documentation — Rules for the abbreviation of title words and titles of publications,Documentation — Règles pour l'abréviation des mots dans les titres et des t
• ISO 5-1:19843573,IS,,ISO 5-1:1984,"Photography — Density measurements — Part 1: Terms, symbols and notations","Photographie — Mesurage des densités — Partie 1: Termes, symboles et notations",1
• ISO 5-2:19853574,IS,,ISO 5-2:1985,Photography — Density measurements — Part 2: Geometric conditions for transmission density,Photographie — Mesurage des densités — Partie 2: Conditions géométr
• ISO 5-2:199120037,IS,,ISO 5-2:1991,Photography — Density measurements — Part 2: Geometric conditions for transmission density,Photographie — Mesurage des densités — Partie 2: Conditions géomét
• ISO 5-2:200128004,IS,,ISO 5-2:2001,Photography — Density measurements — Part 2: Geometric conditions for transmission density,Photographie — Mesurage des densités — Partie 2: Conditions géomét
• ISO 5-3:198420101,IS,,ISO 5-3:1984,Photography — Density measurements — Part 3: Spectral conditions,Photographie — Mesurage des densités — Partie 3: Conditions spectrales,1984-08-16,1,['37.040
• ISO 5-3:199520036,IS,,ISO 5-3:1995,Photography — Density measurements — Part 3: Spectral conditions,Photographie — Mesurage des densités — Partie 3: Conditions spectrales,1995-11-09,2,['37.040
• ISO 5-4:19833578,IS,,ISO 5-4:1983,Photography — Density measurements — Part 4: Geometric conditions for reflection density,Photographie — Mesurage des densités — Partie 4: Conditions géométriq
• ISO 5-4:199520051,IS,,ISO 5-4:1995,Photography — Density measurements — Part 4: Geometric conditions for reflection density,Photographie — Mesurage des densités — Partie 4: Conditions géométri
• ISO 5:19743571,IS,,ISO 5:1974,Photography — Determination of diffuse transmission density,Photographie — Détermination de la densité optique en lumière diffuse,1974-10-01,1,['37.040.20'],ISO
• ISO 6:19743579,IS,,ISO 6:1974,"Photography — Determination of ISO speed of monochrome (black-and-white), continuous-tone photographic negative materials for still photography","Photographie
• ISO 7-1:19823583,IS,,ISO 7-1:1982,"Pipe threads where pressure-tight joints are made on the threads — Part 1: Designation, dimensions and tolerances","Filetages de tuyauterie pour raccordement
• ISO 7-2:19823584,IS,,ISO 7-2:1982,Pipe threads where pressure-tight joints are made on the threads — Part 2: Verification by means of limit gauges,Filetages de tuyauterie pour raccordement ave
• ISO 8:19773585,IS,,ISO 8:1977,Documentation — Presentation of periodicals,Documentation — Présentation des périodiques,1977-09-01,1,['01.140.40'],ISO/TC 46,9599,,"[67723,25439]","['en','fr']
• ISO 9:19863588,IS,,ISO 9:1986,Documentation — Transliteration of Slavic Cyrillic characters into Latin characters,Documentation — Translittération des caractères cyrilliques slaves en caract
• ISO 11:19803591,IS,,ISO 11:1980,Aircraft — Pressure cabin ground test connections,Aéronefs — Raccord pour essai au sol de pressurisation de la cabine des aéronefs,1980-03-01,1,"['49.100','49.
• ISO 12:19763593,IS,,ISO 12:1976,Aerospace — Pipelines — Identification scheme,Aéronefs — Tuyauteries — Procédé d'identification,1976-11-01,1,['49.080'],ISO/TC 20/SC 10,9599,,[3594],"['en','fr
• ISO 15:19813597,IS,,ISO 15:1981,Rolling bearings — Radial bearings — Boundary dimensions — General plan,Roulements — Roulements radiaux — Dimensions d'encombrement — Plan général,1981-12-01,1
• ISO 15:1981/Add 1:19853598,IS,Add,ISO 15:1981/Add 1:1985,Rolling bearings — Radial bearings — Boundary dimensions — General plan — Addendum 1: Diameter series 7 (d greater than or equal to 12 mm and les
• ISO 15:199820513,IS,,ISO 15:1998,"Rolling bearings — Radial bearings — Boundary dimensions, general plan","Roulements — Roulements radiaux — Dimensions d'encombrement, plan général",1998-04-2
• ISO 15:201155216,IS,,ISO 15:2011,"Rolling bearings — Radial bearings — Boundary dimensions, general plan","Roulements — Roulements radiaux — Dimensions d'encombrement, plan général",2011-03-0
• ISO 21:19833606,IS,,ISO 21:1983,Shipbuilding — Inland navigation — Cable-lifters for stud-link anchor chains,Construction navale — Navigation intérieure — Barbotins pour les chaînes d'ancre é
• ISO 22:19753608,IS,,ISO 22:1975,Flat transmission belts and corresponding pulleys — Widths,Courroies plates de transmission et poulies correspondantes — Largeurs,1975-05-01,1,['21.220.10'],IS
• ISO 23:19763610,IS,,ISO 23:1976,Cinematography — Camera usage of 35 mm motion- picture film — Specifications,Cinématographie — Position du film cinématographique de 35 mm dans le couloir de l
• ISO 25:19763612,IS,,ISO 25:1976,Cinematography — Camera usage of 16 mm motion-picture film — Specifications,Cinématographie — Emploi du film cinématographique 16 mm dans la caméra — Spécifica
• ISO 26:19773613,IS,,ISO 26:1977,Cinematography — Projector usage of 16 mm motion-picture films for direct front projection — Specifications,Cinématographie — Utilisation du film 16 mm dans le
• ISO 26:19853614,IS,,ISO 26:1985,Cinematography — Projector usage of 16 mm motion-picture films for direct front projection — Specifications,Cinématographie — Utilisation du film 16 mm dans le
• ISO 31-0:19813620,IS,,ISO 31-0:1981,"General principles concerning quantities, units and symbols","Principes généraux concernant les grandeurs, les unités et les symboles",1981-07-01,2,['01.060
• ISO 31-0:19923621,IS,,ISO 31-0:1992,Quantities and units — Part 0: General principles,Grandeurs et unités — Partie 0: Principes généraux,1992-07-23,3,['01.060'],ISO/TC 12,9599,[3620],[30669],"[
• ISO 31-0:1992/Amd 1:199828988,IS,Amd,ISO 31-0:1992/Amd 1:1998,Quantities and units — Part 0: General principles — Amendment 1,Grandeurs et unités — Partie 0: Principes généraux — Amendement 1,1998-12-20,3
• ISO 31-0:1992/Amd 2:200540910,IS,Amd,ISO 31-0:1992/Amd 2:2005,Quantities and units — Part 0: General principles — Amendment 2,Grandeurs et unités — Partie 0: Principes généraux — Amendement 2,2005-10-05,3
• ISO 31-1:19783622,IS,,ISO 31-1:1978,Quantities and units of space and time,Grandeurs et unités d'espace et de temps,1978-03-01,1,['01.060'],ISO/TC 12,9599,,[3623],['en'],13
• ISO 31-1:1978/Amd 1:19853624,IS,Amd,ISO 31-1:1978/Amd 1:1985,Quantities and units of space and time — Amendment 1,Grandeurs et unités d'espace et de temps — Amendement 1,1985-08-08,1,['01.060'],ISO/TC 12,
• ISO 31-1:19923623,IS,,ISO 31-1:1992,Quantities and units — Part 1: Space and time,Grandeurs et unités — Partie 1: Espace et temps,1992-08-27,2,['01.060'],ISO/TC 12,9599,"[3624,3622]",[31888],"[
• ISO 31-1:1992/Amd 1:199828973,IS,Amd,ISO 31-1:1992/Amd 1:1998,Quantities and units — Part 1: Space and time — Amendment 1,Grandeurs et unités — Partie 1: Espace et temps — Amendement 1,1998-12-20,2,['01.0
• ISO 31-2:19783625,IS,,ISO 31-2:1978,Quantities and units of periodic and related phenomena,Grandeurs et unités de phénomènes périodiques et connexes,1978-03-01,1,['01.060'],ISO/TC 12,9599,,[362
• ISO 31-2:1978/Amd 1:19853627,IS,Amd,ISO 31-2:1978/Amd 1:1985,Quantities and units of periodic and related phenomena — Amendment 1,Grandeurs et unités de phénomènes périodiques et connexes — Amendement 1,1
• ISO 31-2:19923626,IS,,ISO 31-2:1992,Quantities and units — Part 2: Periodic and related phenomena,Grandeurs et unités — Partie 2: Phénomènes périodiques et connexes,1992-08-27,2,['01.060'],ISO/
• ISO 31-2:1992/Amd 1:199828974,IS,Amd,ISO 31-2:1992/Amd 1:1998,Quantities and units — Part 2: Periodic and related phenomena — Amendment 1,Grandeurs et unités — Partie 2: Phénomènes périodiques et connexes
• ISO 31-3:19783628,IS,,ISO 31-3:1978,Quantities and units of mechanics,Grandeurs et unités de mécanique,1978-03-01,1,['01.060'],ISO/TC 12,9599,,[3629],"['en','fr']",18
• ISO 31-3:1978/Amd 1:19853630,IS,Amd,ISO 31-3:1978/Amd 1:1985,Quantities and units of mechanics — Amendment 1,Grandeurs et unités de mécanique — Amendement 1,1985-08-08,1,['01.060'],ISO/TC 12,9599,,[3629],
• ISO 31-3:19923629,IS,,ISO 31-3:1992,Quantities and units — Part 3: Mechanics,Grandeurs et unités — Partie 3: Mécanique,1992-08-27,2,['01.060'],ISO/TC 12,9599,"[3628,3630]",[31889],"['en','fr']"
• ISO 31-3:1992/Amd 1:199828975,IS,Amd,ISO 31-3:1992/Amd 1:1998,Quantities and units — Part 3: Mechanics — Amendment 1,Grandeurs et unités — Partie 3: Mécanique — Amendement 1,1998-12-20,2,['01.060'],ISO/TC
• ISO 31-4:19783631,IS,,ISO 31-4:1978,Quantities and units of heat,Grandeurs et unités de chaleur,1978-03-01,1,['01.060'],ISO/TC 12,9599,,[3632],"['en','fr']",14
• ISO 31-4:1978/Amd 1:19853633,IS,Amd,ISO 31-4:1978/Amd 1:1985,Quantities and units of heat — Amendment 1,Grandeurs et unités de chaleur — Amendement 1,1985-08-08,1,['01.060'],ISO/TC 12,9599,,[3632],['en'],
• ISO 31-4:19923632,IS,,ISO 31-4:1992,Quantities and units — Part 4: Heat,Grandeurs et unités — Partie 4: Chaleur,1992-08-27,2,['01.060'],ISO/TC 12,9599,"[3631,3633]",[31890],"['en','fr']",15
• ISO 31-4:1992/Amd 1:199828976,IS,Amd,ISO 31-4:1992/Amd 1:1998,Quantities and units — Part 4: Heat — Amendment 1,Grandeurs et unités — Partie 4: Chaleur — Amendement 1,1998-12-20,2,['01.060'],ISO/TC 12,959
• ISO 31-5:19793634,IS,,ISO 31-5:1979,Quantities and units of electricity and magnetism,Grandeurs et unités d'électricité et de magnétisme,1979-02-01,1,['01.060'],ISO/TC 12,9599,,[3635],"['en','f
• ISO 31-5:1979/Amd 1:19853636,IS,Amd,ISO 31-5:1979/Amd 1:1985,Quantities and units of electricity and magnetism — Amendment 1,Grandeurs et unités d'électricité et de magnétisme — Amendement 1,1985-08-08,1,
• ISO 31-5:19923635,IS,,ISO 31-5:1992,Quantities and units — Part 5: Electricity and magnetism,Grandeurs et unités — Partie 5: Électricité et magnétisme,1992-11-12,2,['01.060'],ISO/TC 12,9599,"[3
• ISO 31-5:1992/Amd 1:199828977,IS,Amd,ISO 31-5:1992/Amd 1:1998,Quantities and units — Part 5: Electricity and magnetism — Amendment 1,Grandeurs et unités — Partie 5: Électricité et magnétisme — Amendement
• ISO 31-6:19803637,IS,,ISO 31-6:1980,Quantities and units of light and related electromagnetic radiations,Grandeurs et unités de lumière et de rayonnements électromagnétiques connexes,1980-12-01
• ISO 31-6:1980/Amd 1:19853639,IS,Amd,ISO 31-6:1980/Amd 1:1985,Quantities and units of light and related electromagnetic radiations — Amendment 1,Grandeurs et unités de lumière et de rayonnements électromag
• ISO 31-6:19923638,IS,,ISO 31-6:1992,Quantities and units — Part 6: Light and related electromagnetic radiations,Grandeurs et unités — Partie 6: Lumière et rayonnements électromagnétiques connex
• ISO 31-6:1992/Amd 1:199828978,IS,Amd,ISO 31-6:1992/Amd 1:1998,Quantities and units — Part 6: Light and related electromagnetic radiations — Amendment 1,Grandeurs et unités — Partie 6: Lumière et rayonneme
• ISO 31-7:19783640,IS,,ISO 31-7:1978,Quantities and units of acoustics,Grandeurs et unités d'acoustique,1978-03-01,1,['01.060'],ISO/TC 12,9599,,[3641],"['en','fr']",13
• ISO 31-7:1978/Amd 1:19853642,IS,Amd,ISO 31-7:1978/Amd 1:1985,Quantities and units of acoustics — Amendment 1,Grandeurs et unités d'acoustique — Amendement 1,1985-08-08,1,['01.060'],ISO/TC 12,9599,,[3641],
• ISO 31-7:19923641,IS,,ISO 31-7:1992,Quantities and units — Part 7: Acoustics,Grandeurs et unités — Partie 7: Acoustique,1992-08-27,2,['01.060'],ISO/TC 12,9599,"[3642,3640]","[40669,31893]","['e
• ISO 31-7:1992/Amd 1:199828979,IS,Amd,ISO 31-7:1992/Amd 1:1998,Quantities and units — Part 7: Acoustics — Amendment 1,Grandeurs et unités — Partie 7: Acoustique — Amendement 1,1998-12-20,2,['01.060'],ISO/T
• ISO 31-8:19803643,IS,,ISO 31-8:1980,Quantities and units of physical chemistry and molecular physics,Grandeurs et unités de chimie physique et de physique moléculaire,1980-12-01,2,['01.060'],IS
• ISO 31-8:1980/Amd 1:19853645,IS,Amd,ISO 31-8:1980/Amd 1:1985,Quantities and units of physical chemistry and molecular physics — Amendment 1,Grandeurs et unités de chimie physique et de physique moléculair
• ISO 31-8:19923644,IS,,ISO 31-8:1992,Quantities and units — Part 8: Physical chemistry and molecular physics,Grandeurs et unités — Partie 8: Chimie physique et physique moléculaire,1992-12-17,3,
• ISO 31-8:1992/Amd 1:199828980,IS,Amd,ISO 31-8:1992/Amd 1:1998,Quantities and units — Part 8: Physical chemistry and molecular physics — Amendment 1,Grandeurs et unités — Partie 8: Chimie physique et physi
• ISO 31-9:19803646,IS,,ISO 31-9:1980,Quantities and units of atomic and nuclear physics,Grandeurs et unités de physique atomique et nucléaire,1980-12-01,2,['01.060'],ISO/TC 12,9599,,[3647],"['en
• ISO 31-9:1980/Amd 1:19853648,IS,Amd,ISO 31-9:1980/Amd 1:1985,Quantities and units of atomic and nuclear physics — Amendment 1,Grandeurs et unités de physique atomique et nucléaire — Amendement 1,1985-08-0
• ISO 31-9:19923647,IS,,ISO 31-9:1992,Quantities and units — Part 9: Atomic and nuclear physics,Grandeurs et unités — Partie 9: Physique atomique et nucléaire,1992-08-27,3,['01.060'],ISO/TC 12,95
• ISO 31-9:1992/Amd 1:199828981,IS,Amd,ISO 31-9:1992/Amd 1:1998,Quantities and units — Part 9: Atomic and nuclear physics — Amendment 1,Grandeurs et unités — Partie 9: Physique atomique et nucléaire — Amend
• ISO 31-10:19803649,IS,,ISO 31-10:1980,Quantities and units of nuclear reactions and ionizing radiations,Grandeurs et unités de réactions nucléaires et rayonnements ionisants,1980-12-01,2,['01.06
• ISO 31-10:1980/Amd 1:19853651,IS,Amd,ISO 31-10:1980/Amd 1:1985,Quantities and units of nuclear reactions and ionizing radiations — Amendment 1,Grandeurs et unités de réactions nucléaires et rayonnements io
• ISO 31-10:19923650,IS,,ISO 31-10:1992,Quantities and units — Part 10: Nuclear reactions and ionizing radiations,Grandeurs et unités — Partie 10: Réactions nucléaires et rayonnements ionisants,19
• ISO 31-10:1992/Amd 1:199828982,IS,Amd,ISO 31-10:1992/Amd 1:1998,Quantities and units — Part 10: Nuclear reactions and ionizing radiations — Amendment 1,Grandeurs et unités — Partie 10: Réactions nucléaires
• ISO 31-11:19783652,IS,,ISO 31-11:1978,Mathematical signs and symbols for use in the physical sciences and technology,Signes et symboles mathématiques à employer dans les sciences physiques et da
• ISO 31-11:19923653,IS,,ISO 31-11:1992,Quantities and units — Part 11: Mathematical signs and symbols for use in the physical sciences and technology,Grandeurs et unités — Partie 11: Signes et sy
• ISO 31-12:19813654,IS,,ISO 31-12:1981,Dimensionless parameters,Paramètres sans dimension,1981-07-01,2,['01.060'],ISO/TC 12,9599,,[3655],"['en','fr']",6
• ISO 31-12:19923655,IS,,ISO 31-12:1992,Quantities and units — Part 12: Characteristic numbers,Grandeurs et unités — Partie 12: Nombres caractéristiques,1992-08-27,3,['01.060'],ISO/TC 12,9599,[365
• ISO 31-12:1992/Amd 1:199828983,IS,Amd,ISO 31-12:1992/Amd 1:1998,Quantities and units — Part 12: Characteristic numbers — Amendment 1,Grandeurs et unités — Partie 12: Nombres caractéristiques — Amendement 1
• ISO 31-13:19813656,IS,,ISO 31-13:1981,Quantities and units of solid state physics,Grandeurs et unités de la physique de l'état solide,1981-07-01,2,['01.060'],ISO/TC 12,9599,,[3657],"['en','fr']"
• ISO 31-13:1981/Amd 1:19853658,IS,Amd,ISO 31-13:1981/Amd 1:1985,Quantities and units of solid state physics — Amendment 1,Grandeurs et unités de la physique de l'état solide — Amendement 1,1985-08-08,2,['01
• ISO 31-13:19923657,IS,,ISO 31-13:1992,Quantities and units — Part 13: Solid state physics,Grandeurs et unités — Partie 13: Physique de l'état solide,1992-08-27,3,['01.060'],ISO/TC 12,9599,"[3656
• ISO 31-13:1992/Amd 1:199828984,IS,Amd,ISO 31-13:1992/Amd 1:1998,Quantities and units — Part 13: Solid state physics — Amendment 1,Grandeurs et unités — Partie 13: Physique de l'état solide — Amendement 1,1
• ISO 34-1:19943662,IS,,ISO 34-1:1994,"Rubber, vulcanized or thermoplastic — Determination of tear strength — Part 1: Trouser, angle and crescent test pieces","Caoutchouc vulcanisé ou thermoplast
• ISO 34-1:1994/Cor 1:199931350,IS,Cor,ISO 34-1:1994/Cor 1:1999,"Rubber, vulcanized or thermoplastic — Determination of tear strength — Part 1: Trouser, angle and crescent test pieces — Technical Corrigendu
• ISO 34-1:200438943,IS,,ISO 34-1:2004,"Rubber, vulcanized or thermoplastic — Determination of tear strength — Part 1: Trouser, angle and crescent test pieces","Caoutchouc vulcanisé ou thermoplas
• ISO 34-1:201050751,IS,,ISO 34-1:2010,"Rubber, vulcanized or thermoplastic — Determination of tear strength — Part 1: Trouser, angle and crescent test pieces","Caoutchouc vulcanisé ou thermoplas
• ISO 34-1:201565926,IS,,ISO 34-1:2015,"Rubber, vulcanized or thermoplastic — Determination of tear strength — Part 1: Trouser, angle and crescent test pieces","Caoutchouc vulcanisé ou thermoplas
• ISO 34-2:19962194,IS,,ISO 34-2:1996,"Rubber, vulcanized or thermoplastic — Determination of tear strength — Part 2: Small (Delft) test pieces",Caoutchouc vulcanisé ou thermoplastique — Détermin
• ISO 34-2:200745383,IS,,ISO 34-2:2007,"Rubber, vulcanized or thermoplastic — Determination of tear strength — Part 2: Small (Delft) test pieces",Caoutchouc vulcanisé ou thermoplastique — Détermi
• ISO 34-2:201157719,IS,,ISO 34-2:2011,"Rubber, vulcanized or thermoplastic — Determination of tear strength — Part 2: Small (Delft) test pieces",Caoutchouc vulcanisé ou thermoplastique — Détermi
• ISO 34-2:201565927,IS,,ISO 34-2:2015,"Rubber, vulcanized or thermoplastic — Determination of tear strength — Part 2: Small (Delft) test pieces",Caoutchouc vulcanisé ou thermoplastique — Détermi
• ISO 34:19793661,IS,,ISO 34:1979,"Rubber, vulcanized — Determination of tear strength (trouser, angle and crescent test pieces)","Caoutchouc vulcanisé — Détermination de la résistance au déchi
• ISO 35:19823663,IS,,ISO 35:1982,"Rubber latex, natural — Determination of mechanical stability",Latex de caoutchouc — Détermination de la stabilité mécanique,1982-04-01,2,['83.040.10'],ISO/TC
• ISO 35:19893664,IS,,ISO 35:1989,Natural rubber latex concentrate — Determination of mechanical stability,Latex de caoutchouc naturel concentré — Détermination de la stabilité mécanique,1989-0
• ISO 35:199525529,IS,,ISO 35:1995,"Latex rubber, natural, concentrate — Determination of mechanical stability",Latex de caoutchouc naturel concentré — Détermination de la stabilité mécanique,1
• ISO 36:19853666,IS,,ISO 36:1985,"Rubber, vulcanized — Determination of adhesion to textile fabric",Caoutchouc vulcanisé — Détermination de l'adhérence aux textiles,1985-12-12,1,['83.060'],ISO
• ISO 36:19933667,IS,,ISO 36:1993,"Rubber, vulcanized or thermoplastic — Determination of adhesion to textile fabric",Caoutchouc vulcanisé ou thermoplastique — Détermination de l'adhérence aux
• ISO 36:199928592,IS,,ISO 36:1999,"Rubber, vulcanized or thermoplastic — Determination of adhesion to textile fabric",Caoutchouc vulcanisé ou thermoplastique — Détermination de l'adhérence aux
• ISO 36:200541454,IS,,ISO 36:2005,"Rubber, vulcanized or thermoplastic — Determination of adhesion to textile fabrics",Caoutchouc vulcanisé ou thermoplastique — Détermination de l'adhérence au
• ISO 36:201153022,IS,,ISO 36:2011,"Rubber, vulcanized or thermoplastic — Determination of adhesion to textile fabrics",Caoutchouc vulcanisé ou thermoplastique — Détermination de l'adhérence au
• ISO 36:201772773,IS,,ISO 36:2017,"Rubber, vulcanized or thermoplastic — Determination of adhesion to textile fabrics",Caoutchouc vulcanisé ou thermoplastique — Détermination de l'adhérence au
• ISO 37:19773668,IS,,ISO 37:1977,"Rubber, vulcanized — Determination of tensile stress-strain properties",Caoutchouc vulcanisé — Essai de traction-allongement,1977-10-01,2,['83.060'],ISO/TC 45
• ISO 37:19943669,IS,,ISO 37:1994,"Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties",Caoutchouc vulcanisé ou thermoplastique — Détermination des caractéri
• ISO 37:200540200,IS,,ISO 37:2005,"Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties",Caoutchouc vulcanisé ou thermoplastique — Détermination des caractér
• ISO 37:2005/Cor 1:200850930,IS,Cor,ISO 37:2005/Cor 1:2008,"Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties — Technical Corrigendum 1",Caoutchouc vulcanisé ou ther
• ISO 37:201153023,IS,,ISO 37:2011,"Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties",Caoutchouc vulcanisé ou thermoplastique — Détermination des caractér
• ISO 37:201768116,IS,,ISO 37:2017,"Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties",Caoutchouc vulcanisé ou thermoplastique — Détermination des caractér
• ISO 43:19763675,IS,,ISO 43:1976,Aircraft — Jacking pads,Aéronefs — Points d'appui du vérin de levage,1976-07-01,1,['49.100'],ISO/TC 20/SC 9,9599,,[65980],"['en','fr']",4
• ISO 45:19803677,IS,,ISO 45:1980,Aircraft — Pressure refuelling connections,Aéronefs — Raccords de remplissage sous pression en combustible à bord des aéronefs,1980-05-01,1,"['49.100','49.050'
• ISO 48:19793682,IS,,ISO 48:1979,Vulcanized rubbers — Determination of hardness (Hardness between 30 and 85 IRHD),Élastomères vulcanisés — Détermination de la dureté (Dureté comprise entre 30
• ISO 48:19943683,IS,,ISO 48:1994,"Rubber, vulcanized or thermoplastic — Determination of hardness (hardness between 10 IRHD and 100 IRHD)",Caoutchouc vulcanisé ou thermoplastique — Déterminati
• ISO 48:1994/Amd 1:199927003,IS,Amd,ISO 48:1994/Amd 1:1999,"Rubber, vulcanized or thermoplastic — Determination of hardness (hardness between 10 IRHD and 100 IRHD) — Amendment 1",Caoutchouc vulcanisé ou
• ISO 48:200741455,IS,,ISO 48:2007,"Rubber, vulcanized or thermoplastic — Determination of hardness (hardness between 10 IRHD and 100 IRHD)",Caoutchouc vulcanisé ou thermoplastique — Déterminat
• ISO 48:2007/Cor 1:200953497,IS,Cor,ISO 48:2007/Cor 1:2009,"Rubber, vulcanized or thermoplastic — Determination of hardness (hardness between 10 IRHD and 100 IRHD) — Technical Corrigendum 1",Caoutchouc v
• ISO 48:201054100,IS,,ISO 48:2010,"Rubber, vulcanized or thermoplastic — Determination of hardness (hardness between 10 IRHD and 100 IRHD)",Caoutchouc vulcanisé ou thermoplastique — Déterminat
• ISO 49:19833684,IS,,ISO 49:1983,Malleable cast iron fittings threaded to ISO 7/1,Raccords en fonte malléable filetés selon l'ISO 7/1,1983-05-01,1,['23.040.40'],ISO/TC 5/SC 5,9599,,[3686],"['e
• ISO 53:19743690,IS,,ISO 53:1974,Cylindrical gears for general and heavy engineering — Basic rack,Engrenages cylindriques de mécanique générale et de grosse mécanique — Crémaillère de référenc
• ISO 54:19773691,IS,,ISO 54:1977,Cylindrical gears for general engineering and for heavy engineering — Modules and diametral pitches,Engrenages cylindriques de mécanique générale et de grosse
• ISO 60:19773698,IS,,ISO 60:1977,Plastics — Determination of apparent density of material that can be poured from a specified funnel,Plastiques — Détermination de la masse volumique apparente
• ISO 61:19763699,IS,,ISO 61:1976,Plastics — Determination of apparent density of moulding material that cannot be poured from a specified funnel,Matières plastiques — Détermination de la masse
• ISO 62:19803700,IS,,ISO 62:1980,Plastics — Determination of water absorption,Plastiques — Détermination de l'absorption d'eau,1980-09-01,1,['83.080.01'],ISO/TC 61/SC 6,9599,[3919],[25542],"['
• ISO 62:199925542,IS,,ISO 62:1999,Plastics — Determination of water absorption,Plastiques — Détermination de l'absorption d'eau,1999-02-04,2,['83.080.01'],ISO/TC 61/SC 6,9599,[3700],"[38239,41
• ISO 63:19753701,IS,,ISO 63:1975,Flat transmission belts — Lengths,Courroies plates de transmission — Longueurs,1975-05-01,1,['21.220.10'],ISO/TC 41,9599,,[3609],"['en','fr']",1
• ISO 64:19743702,IS,,ISO 64:1974,Withdrawal of ISO 64-1974,Annulation de l'ISO 64-1974,1974-05-01,1,['23.040.10'],ISO/TC 5,9599,,[9985],['en'],1
• ISO 68-1:19983707,IS,,ISO 68-1:1998,ISO general purpose screw threads — Basic profile — Part 1: Metric screw threads,Filetages ISO pour usages généraux — Profil de base — Partie 1: Filetages mé
• ISO 68-1:1998/Amd 1:202078731,IS,Amd,ISO 68-1:1998/Amd 1:2020,ISO general purpose screw threads — Basic profile — Part 1: Metric screw threads — Amendment 1,Filetages ISO pour usages généraux — Profil de
• ISO 68-2:199827137,IS,,ISO 68-2:1998,ISO general purpose screw threads — Basic profile — Part 2: Inch screw threads,Filetages ISO pour usages généraux — Profil de base — Partie 2: Filetages en
• ISO 68-2:1998/Amd 1:202078730,IS,Amd,ISO 68-2:1998/Amd 1:2020,ISO general-purpose screw threads — Basic profile — Part 2: Inch screw threads — Amendment 1: The dimensions of basic profile,Filetages ISO po
• ISO 68:19733706,IS,,ISO 68:1973,ISO general purpose screw threads — Basic profile,Filetages ISO pour usages généraux — Profil de base,1973-05-01,1,['21.040.01'],ISO/TC 1,9599,,"[27137,3707]",
• ISO 69:19723708,IS,,ISO 69:1972,Cinematography — 16 mm motion-picture raw stock film — Cutting and perforating dimensions,Cinématographie — Films cinématographiques de 16 mm vierges — Dimensi
• ISO 69:19903709,IS,,ISO 69:1990,Cinematography — 16 mm motion-picture and magnetic film — Cutting and perforating dimensions,Cinématographie — Films cinématographiques et magnétiques 16 mm —
• ISO 71:19773711,IS,,ISO 71:1977,"Cinematography — 16 mm negative photographic sound record on 16 mm, 35/16 mm and 35/32 mm motion-picture film — Positions and dimensions","Cinématographie — E
• ISO 75-1:19933717,IS,,ISO 75-1:1993,Plastics — Determination of temperature of deflection under load — Part 1: General test method,Plastiques — Détermination de la température de fléchissement
• ISO 75-1:200431255,IS,,ISO 75-1:2004,Plastics — Determination of temperature of deflection under load — Part 1: General test method,Plastiques — Détermination de la température de fléchissement
• ISO 75-1:201357703,IS,,ISO 75-1:2013,Plastics — Determination of temperature of deflection under load — Part 1: General test method,Plastiques — Détermination de la température de fléchissement
• ISO 75-2:19933718,IS,,ISO 75-2:1993,Plastics — Determination of temperature of deflection under load — Part 2: Plastics and ebonite,Plastiques — Détermination de la température de fléchissement
• ISO 75-2:200431256,IS,,ISO 75-2:2004,Plastics — Determination of temperature of deflection under load — Part 2: Plastics and ebonite,Plastiques — Détermination de la température de fléchissemen
• ISO 75-3:19933719,IS,,ISO 75-3:1993,Plastics — Determination of temperature of deflection under load — Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics,Plastique
• ISO 75-3:200431257,IS,,ISO 75-3:2004,Plastics — Determination of temperature of deflection under load — Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics,Plastiqu
• ISO 75:19743715,IS,,ISO 75:1974,Plastics and ebonite — Determination of temperature of deflection under load,Matières plastiques et ébonite — Détermination de la température de fléchissement
• ISO 75:19873716,IS,,ISO 75:1987,Plastics and ebonite — Determination of temperature of deflection under load,Plastiques et ébonite — Détermination de la température de fléchissement sous char
• ISO 76:19783720,IS,,ISO 76:1978,Rolling bearings — Static load ratings,Roulements — Charges statiques de base,1978-06-01,1,['21.100.20'],ISO/TC 4,9599,,[3721],"['en','fr']",4
• ISO 76:19873721,IS,,ISO 76:1987,Rolling bearings — Static load ratings,Roulements — Charges statiques de base,1987-02-05,2,['21.100.20'],ISO/TC 4/SC 8,9599,[3720],[38101],"['en','fr']",5
• ISO 76:1987/Amd 1:199929762,IS,Amd,ISO 76:1987/Amd 1:1999,Rolling bearings — Static load ratings — Amendment 1: Annex A (informative) — Discontinuities in the calculation of basic static load ratings,Ro
• ISO 78-2:19823725,IS,,ISO 78-2:1982,Layouts for standards — Part 2: Standard for chemical analysis,Plans de normes — Partie 2: Norme d'analyse chimique,1982-04-01,1,['71.040.40'],ISO/TC 47,9599
• ISO 78-4:19833728,IS,,ISO 78-4:1983,Layouts for standards — Part 4: Standard for atomic absorption spectrometric analysis,Plans de normes — Partie 4: Norme d'analyse par spectrométrie d'absorpt
• ISO 82:19743732,IS,,ISO 82:1974,Steel — Tensile testing,Acier — Essai de traction,1974-08-01,1,['77.040.10'],ISO/TC 164/SC 1,9599,,[13414],"['en','fr']",14
• ISO 83:19763733,IS,,ISO 83:1976,Steel — Charpy impact test (U-notch),Acier — Essai de résilience Charpy (entaille en U),1976-11-01,1,['77.040.10'],ISO/TC 164/SC 4,9599,,[35183],"['en','fr']",
• ISO 86:19743736,IS,,ISO 86:1974,"Steel — Tensile testing of sheet and strip less than 3 mm and not less than 0,5 mm thick","Acier — Essai de traction des tôles et feuillards d'épaisseur infér
• ISO 89:19743739,IS,,ISO 89:1974,Steel — Tensile testing of wire,Acier — Essai de traction des fils,1974-08-01,1,"['77.140.65','77.040.10']",ISO/TC 164/SC 1,9599,,[13414],"['en','fr']",6
• ISO 90-1:19863741,IS,,ISO 90-1:1986,Light gauge metal containers — Definitions and determination methods for dimensions and capacities — Part 1: Open-top cans,Récipients métalliques légers — Dé
• ISO 90-2:19863742,IS,,ISO 90-2:1986,Light gauge metal containers — Definitions and determination methods for dimensions and capacities — Part 2: General use containers,Récipients métalliques lé
• ISO 90-3:19863744,IS,,ISO 90-3:1986,Light gauge metal containers — Definitions and determination methods for dimensions and capacities — Part 3: Aerosol cans,Récipients métalliques légers — Déf
• ISO 90-3:1986/Amd 1:19943745,IS,Amd,ISO 90-3:1986/Amd 1:1994,Light gauge metal containers — Definitions and determination methods for dimensions and capacities — Part 3: Aerosol cans — Amendment 1: Dimens
• ISO 90:19773740,IS,,ISO 90:1977,Hermetically sealed metal cans for food and drinks — Specifications,Récipients métalliques étanches pour denrées alimentaires et boissons — Spécifications,1977
• ISO 91-1:19823748,IS,,ISO 91-1:1982,Petroleum measurement tables — Part 1: Tables based on reference temperatures of 15 degrees C and 60 degrees F,Tables de mesure du pétrole — Partie 1: Tables
• ISO 91-1:19923749,IS,,ISO 91-1:1992,Petroleum measurement tables — Part 1: Tables based on reference temperatures of 15 degrees C and 60 degrees F,Tables de mesure du pétrole — Partie 1: Tables
• ISO 91-2:19913750,IS,,ISO 91-2:1991,Petroleum measurement tables — Part 2: Tables based on a reference temperature of 20 degrees C,Tables de mesurage du pétrole — Partie 2: Tables basées sur la
• ISO 93-1:19823753,IS,,ISO 93-1:1982,Textile machinery and accessories — Cylindrical sliver cans — Part 1: Main dimensions,Matériel pour l'industrie textile — Pots cylindriques pour rubans — Par
• ISO 93-1:199825718,IS,,ISO 93-1:1998,Textile machinery and accessories — Cylindrical sliver cans — Part 1: Main dimensions,Matériel pour l'industrie textile — Pots cylindriques pour rubans — Pa
• ISO 93-2:19783755,IS,,ISO 93-2:1978,Textile machinery and accessories — Cylindrical sliver cans — Part 2: Spring bottoms,Matériel pour l'industrie textile — Pots cylindriques pour rubans — Part
• ISO 93-2:199924055,IS,,ISO 93-2:1999,Textile machinery and accessories — Cylindrical sliver cans — Part 2: Spring bottoms,Matériel pour l'industrie textile — Pots cylindriques pour rubans — Par
• ISO 96-1:19923762,IS,,ISO 96-1:1992,Textile machinery and accessories — Rings and travellers for ring spinning and ring doubling frames — Part 1: T-rings and their appropriate travellers,Matéri
• ISO 96-1:200943450,IS,,ISO 96-1:2009,Textile machinery and accessories — Rings and travellers for ring spinning and ring twisting frames — Part 1: Flange rings T and SF and their travellers,Mat
• ISO 96-2:19923763,IS,,ISO 96-2:1992,"Textile machinery and accessories — Rings and travellers for ring spinning and ring doubling frames — Part 2: HZCH-, HZ- and J-rings and their appropriate t
• ISO 96:19813761,IS,,ISO 96:1981,Textile machinery and accessories — Rings for ring-spinning and ring-doubling frames for 'C' and 'EL' travellers — Principal dimensions,Matériel pour l'industr
• ISO 97:19753764,IS,,ISO 97:1975,"Textile machinery and accessories — Rings for spinning, doubling and twisting for ear-shaped travellers",Matériel pour l'industrie textile — Anneaux à filer e
• ISO 98:19773765,IS,,ISO 98:1977,Textile machinery and accessories — Spinning preparatory and spinning machinery — Covering characteristics of top rollers,Matériel pour l'industrie textile — M
• ISO 99:19753766,IS,,ISO 99:1975,Pulleys for flat transmission belts — Diameters,Poulies pour courroies plates de transmission — Diamètres,1975-05-01,1,['21.220.10'],ISO/TC 41,9599,,[3609],"['
• ISO 100:19753767,IS,,ISO 100:1975,Pulleys for flat transmission belts — Crowns,Poulies pour courroies plates de transmission — Bombement,1975-05-01,1,['21.220.10'],ISO/TC 41,9599,,[3768],"['en
• ISO 100:19843768,IS,,ISO 100:1984,Pulleys for flat transmission belts — Crowns,Poulies pour courroies plates de transmission — Bombement,1984-04-01,2,['21.220.10'],ISO/TC 41/SC 1,9599,[3767],[
• ISO 102:19763770,IS,,ISO 102:1976,Aircraft — Gravity filling orifices,Aéronefs — Orifices de remplissage par gravité,1976-04-01,1,['49.080'],ISO/TC 20/SC 10,9599,,[3771],"['en','fr']",1
• ISO 104:19793773,IS,,ISO 104:1979,Rolling bearings — Thrust bearings with flat back faces — Boundary dimensions,Roulements — Butées à rondelles plates — Dimensions d'encombrement,1979-12-01,1,
• ISO 104:199420518,IS,,ISO 104:1994,"Rolling bearings — Thrust bearings — Boundary dimensions, general plan","Roulements — Butées — Dimensions d'encombrement, plan général",1994-12-22,2,['21.10
• ISO 104:200233398,IS,,ISO 104:2002,"Rolling bearings — Thrust bearings — Boundary dimensions, general plan","Roulements — Butées — Dimensions d'encombrement, plan général",2002-02-28,3,['21.10
• ISO 105-A01:19873782,IS,,ISO 105-A01:1987,Textiles — Tests for colour fastness — Part A01: General principles of testing,Textiles — Essais de solidité des teintures — Partie A01: Principes générau
• ISO 105-A01:19893783,IS,,ISO 105-A01:1989,Textiles — Tests for colour fastness — Part A01: General principles of testing,Textiles — Essais de solidité des teintures — Partie A01: Principes générau
• ISO 105-A01:199421985,IS,,ISO 105-A01:1994,Textiles — Tests for colour fastness — Part A01: General principles of testing,Textiles — Essais de solidité des teintures — Partie A01: Principes généra
• ISO 105-A02:19873784,IS,,ISO 105-A02:1987,Textiles — Tests for colour fastness — Part A02: Grey scale for assessing change in colour,Textiles — Essais de solidité des teintures — Partie A02: Échel
• ISO 105-A03:19873786,IS,,ISO 105-A03:1987,Textiles — Tests for colour fastness — Part A03: Grey scale for assessing staining,Textiles — Essais de solidité des teintures — Partie A03: Échelle de gr
• ISO 105-A03:19933787,IS,,ISO 105-A03:1993,Textiles — Tests for colour fastness — Part A03: Grey scale for assessing staining,Textiles — Essais de solidité des teintures — Partie A03: Échelle de gr
• ISO 105-A03:1993/Cor 1:199727966,IS,Cor,ISO 105-A03:1993/Cor 1:1997,Textiles — Tests for colour fastness — Part A03: Grey scale for assessing staining — Technical Corrigendum 1: (Applies to French version on
• ISO 105-A03:1993/Cor 2:200542127,IS,Cor,ISO 105-A03:1993/Cor 2:2005,Textiles — Tests for colour fastness — Part A03: Grey scale for assessing staining — Technical Corrigendum 2,Textiles — Essais de solidité
• ISO 105-A:19843781,IS,,ISO 105-A:1984,Textiles — Tests for colour fastness — Part A: General principles,Textiles — Essais de solidité des teintures — Partie A: Principes généraux,1984-11-01,2,['
• ISO 105-B01:19883792,IS,,ISO 105-B01:1988,Textiles — Tests for colour fastness — Part B01: Colour fastness to light : Daylight,Textiles — Essais de solidité des teintures — Partie B01: Solidité de
• ISO 105-B01:19893793,IS,,ISO 105-B01:1989,Textiles — Tests for colour fastness — Part B01: Colour fastness to light: Daylight,Textiles — Essais de solidité des teintures — Partie B01: Solidité des
• ISO 105-B01:199420022,IS,,ISO 105-B01:1994,Textiles — Tests for colour fastness — Part B01: Colour fastness to light: Daylight,Textiles — Essais de solidité des teintures — Partie B01: Solidité de
• ISO 105-B01:1994/Amd 1:199826491,IS,Amd,ISO 105-B01:1994/Amd 1:1998,Textiles — Tests for colour fastness — Part B01: Colour fastness to light: Daylight — Amendment 1,Textiles — Essais de solidité des teintur
• ISO 105-B02:19883794,IS,,ISO 105-B02:1988,Textiles — Tests for colour fastness — Part B02: Colour fastness to artificial light : Xenon arc fading lamp test,Textiles — Essais de solidité des teintu
• ISO 105-B02:199420023,IS,,ISO 105-B02:1994,Textiles — Tests for colour fastness — Part B02: Colour fastness to artificial light: Xenon arc fading lamp test,Textiles — Essais de solidité des teintu
• ISO 105-B02:1994/Amd 1:199826492,IS,Amd,ISO 105-B02:1994/Amd 1:1998,Textiles — Tests for colour fastness — Part B02: Colour fastness to artificial light: Xenon arc fading lamp test — Amendment 1,Textiles — E
• ISO 105-B02:1994/Amd 2:200032091,IS,Amd,ISO 105-B02:1994/Amd 2:2000,Textiles — Tests for colour fastness — Part B02: Colour fastness to artificial light: Xenon arc fading lamp test — Amendment 2: .,Textiles
• ISO 105-B02:201341372,IS,,ISO 105-B02:2013,Textiles — Tests for colour fastness — Part B02: Colour fastness to artificial light: Xenon arc fading lamp test,Textiles — Essais de solidité des teintu
• ISO 105-B03:19883795,IS,,ISO 105-B03:1988,Textiles — Tests for colour fastness — Part B03: Colour fastness to weathering: Outdoor exposure,Textiles — Essais de solidité des teintures — Partie B03:
• ISO 105-B03:199420024,IS,,ISO 105-B03:1994,Textiles — Tests for colour fastness — Part B03: Colour fastness to weathering: Outdoor exposure,Textiles — Essais de solidité des teintures — Partie B03
• ISO 105-B04:19883796,IS,,ISO 105-B04:1988,Textiles — Tests for colour fastness — Part B04: Colour fastness to weathering : Xenon arc,Textiles — Essais de solidité des teintures — Partie B04: Solid
• ISO 105-B04:199420025,IS,,ISO 105-B04:1994,Textiles — Tests for colour fastness — Part B04: Colour fastness to artificial weathering: Xenon arc fading lamp test,Textiles — Essais de solidité des t
• ISO 105-B05:19883797,IS,,ISO 105-B05:1988,Textiles — Tests for colour fastness — Part B05: Detection and assessment of photochromism,Textiles — Essais de solidité des teintures — Partie B05: Détec
• ISO 105-B06:19923798,IS,,ISO 105-B06:1992,Textiles — Tests for colour fastness — Part B06: Colour fastness to artificial light at high temperatures: Xenon arc fading lamp test,Textiles — Essais de
• ISO 105-B06:199826493,IS,,ISO 105-B06:1998,Textiles — Tests for colour fastness — Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test,Textiles
• ISO 105-B06:1998/Amd 1:200233048,IS,Amd,ISO 105-B06:1998/Amd 1:2002,Textiles — Tests for colour fastness — Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp
• ISO 105-B:19843791,IS,,ISO 105-B:1984,Textiles — Tests for colour fastness — Part B: Colour fastness to light and weathering,Textiles — Essais de solidité des teintures — Partie B: Solidité des
• ISO 105-C01:19873800,IS,,ISO 105-C01:1987,Textiles — Tests for colour fastness — Part C01: Colour fastness to washing: Test 1,Textiles — Essais de solidité des teintures — Partie C01: Solidité des
• ISO 105-C01:19893801,IS,,ISO 105-C01:1989,Textiles — Tests for colour fastness — Part C01: Colour fastness to washing: Test 1,Textiles — Essais de solidité des teintures — Partie C01: Solidité des
• ISO 105-C02:19873802,IS,,ISO 105-C02:1987,Textiles — Tests for colour fastness — Part C02: Colour fastness to washing : Test 2,Textiles — Essais de solidité des teintures — Partie C02: Solidité de
• ISO 105-C02:19893803,IS,,ISO 105-C02:1989,Textiles — Tests for colour fastness — Part C02: Colour fastness to washing: Test 2,Textiles — Essais de solidité des teintures — Partie C02: Solidité des
• ISO 105-C03:19873804,IS,,ISO 105-C03:1987,Textiles — Tests for colour fastness — Part C03: Colour fastness to washing: Test 3,Textiles — Essais de solidité des teintures — Partie C03: Solidité des
• ISO 105-C03:19893805,IS,,ISO 105-C03:1989,Textiles — Tests for colour fastness — Part C03: Colour fastness to washing: Test 3,Textiles — Essais de solidité des teintures — Partie C03: Solidité des
• ISO 105-C04:19873806,IS,,ISO 105-C04:1987,Textiles — Tests for colour fastness — Part C04: Colour fastness to washing : Test 4,Textiles — Essais de solidité des teintures — Partie C04: Solidité de
• ISO 105-C04:19893807,IS,,ISO 105-C04:1989,Textiles — Tests for colour fastness — Part C04: Colour fastness to washing: Test 4,Textiles — Essais de solidité des teintures — Partie C04: Solidité des
• ISO 105-C05:19873808,IS,,ISO 105-C05:1987,Textiles — Tests for colour fastness — Part C05: Colour fastness to washing : Test 5,Textiles — Essais de solidité des teintures — Partie C05: Solidité de
• ISO 105-C05:19893809,IS,,ISO 105-C05:1989,Textiles — Tests for colour fastness — Part C05: Colour fastness to washing: Test 5,Textiles — Essais de solidité des teintures — Partie C05: Solidité des
• ISO 105-C06:19873810,IS,,ISO 105-C06:1987,Textiles — Tests for colour fastness — Part C06: Colour fastness to domestic and commercial laundering,Textiles — Essais de solidité des teintures — Parti
• ISO 105-C06:199421983,IS,,ISO 105-C06:1994,Textiles — Tests for colour fastness — Part C06: Colour fastness to domestic and commercial laundering,Textiles — Essais de solidité des teintures — Part
• ISO 105-C06:1994/Cor 1:200236373,IS,Cor,ISO 105-C06:1994/Cor 1:2002,Textiles — Tests for colour fastness — Part C06: Colour fastness to domestic and commercial laundering — Technical Corrigendum 1,Textiles —
• ISO 105-C06:1994/Cor 2:200237111,IS,Cor,ISO 105-C06:1994/Cor 2:2002,Textiles — Tests for colour fastness — Part C06: Colour fastness to domestic and commercial laundering — Technical Corrigendum 2,Textiles —
• ISO 105-C08:200130482,IS,,ISO 105-C08:2001,Textiles — Tests for colour fastness — Part C08: Colour fastness to domestic and commercial laundering using a non-phosphate reference detergent incorpor
• ISO 105-C08:2001/Amd 1:200641613,IS,Amd,ISO 105-C08:2001/Amd 1:2006,Textiles — Tests for colour fastness — Part C08: Colour fastness to domestic and commercial laundering using a non-phosphate reference dete
• ISO 105-C08:2001/Cor 1:200237177,IS,Cor,ISO 105-C08:2001/Cor 1:2002,Textiles — Tests for colour fastness — Part C08: Colour fastness to domestic and commercial laundering using a non-phosphate reference dete
• ISO 105-C09:2001/Cor 1:200237178,IS,Cor,ISO 105-C09:2001/Cor 1:2002,Textiles — Tests for colour fastness — Part C09: Colour fastness to domestic and commercial laundering — Oxidative bleach response using a
• ISO 105-C12:200437645,IS,,ISO 105-C12:2004,Textiles - Tests for colour fastness — Part C12: Colour fastness to industrial laundering,Textiles - Essais de solidité des teintures — Partie C12: Solid
• ISO 105-C12:2004/Cor 1:200745730,IS,Cor,ISO 105-C12:2004/Cor 1:2007,Textiles - Tests for colour fastness — Part C12: Colour fastness to industrial laundering — Technical Corrigendum 1,Textiles - Essais de so
• ISO 105-C:19823799,IS,,ISO 105-C:1982,Textiles — Tests for colour fastness — Part C: Colour fastness to washing and laundering,Textiles — Essais de solidité des teintures — Partie C: Solidité de
• ISO 105-D01:19873812,IS,,ISO 105-D01:1987,Textiles — Tests for colour fastness — Part D01: Colour fastness to dry cleaning,Textiles — Essais de solidité des teintures — Partie D01: Solidité des te
• ISO 105-D01:199322233,IS,,ISO 105-D01:1993,Textiles — Tests for colour fastness — Part D01: Colour fastness to dry cleaning,Textiles — Essais de solidité des teintures — Partie D01: Solidité des t
• ISO 105-D02:19873813,IS,,ISO 105-D02:1987,Textiles — Tests for colour fastness — Part D02: Colour fastness to rubbing: Organic solvents,Textiles — Essais de solidité des teintures — Partie D02: So
• ISO 105-D02:199322234,IS,,ISO 105-D02:1993,Textiles — Tests for colour fastness — Part D02: Colour fastness to rubbing: Organic solvents,Textiles — Essais de solidité des teintures — Partie D02: S
• ISO 105-D:19823811,IS,,ISO 105-D:1982,Textiles — Tests for colour fastness — Part D: Colour fastness to dry cleaning,Textiles — Essais de solidité des teintures — Partie D: Solidité des couleurs
• ISO 105-E01:19873815,IS,,ISO 105-E01:1987,Textiles — Tests for colour fastness — Part E01: Colour fastness to water,Textiles — Essais de solidité des teintures — Partie E01: Solidité des teintures
• ISO 105-E01:19893816,IS,,ISO 105-E01:1989,Textiles — Tests for colour fastness — Part E01: Colour fastness to water,Textiles — Essais de solidité des teintures — Partie E01: Solidité des teintures
• ISO 105-E01:199421986,IS,,ISO 105-E01:1994,Textiles — Tests for colour fastness — Part E01: Colour fastness to water,Textiles — Essais de solidité des teintures — Partie E01: Solidité des teinture
• ISO 105-E01:1994/Cor 1:200236371,IS,Cor,ISO 105-E01:1994/Cor 1:2002,Textiles — Tests for colour fastness — Part E01: Colour fastness to water — Technical Corrigendum 1,Textiles — Essais de solidité des teint
• ISO 105-E01:201052230,IS,,ISO 105-E01:2010,Textiles — Tests for colour fastness — Part E01: Colour fastness to water,Textiles — Essais de solidité des coloris — Partie E01: Solidité des coloris à
• ISO 105-E02:19873818,IS,,ISO 105-E02:1987,Textiles — Tests for colour fastness — Part E02: Colour fastness to sea water,Textiles — Essais de solidité des teintures — Partie E02: Solidité des teint
• ISO 105-E02:19893819,IS,,ISO 105-E02:1989,Textiles — Tests for colour fastness — Part E02: Colour fastness to sea water,Textiles — Essais de solidité des teintures — Partie E02: Solidité des teint
• ISO 105-E02:199421987,IS,,ISO 105-E02:1994,Textiles — Tests for colour fastness — Part E02: Colour fastness to sea water,Textiles — Essais de solidité des teintures — Partie E02: Solidité des tein
• ISO 105-E02:1994/Cor 1:200236370,IS,Cor,ISO 105-E02:1994/Cor 1:2002,Textiles — Tests for colour fastness — Part E02: Colour fastness to sea water — Technical Corrigendum 1,Textiles — Essais de solidité des t
• ISO 105-E03:19873820,IS,,ISO 105-E03:1987,Textiles — Tests for colour fastness — Part E03: Colour fastness to chlorinated water (swimming-bath water),Textiles — Essais de solidité des teintures —
• ISO 105-E03:199421980,IS,,ISO 105-E03:1994,Textiles — Tests for colour fastness — Part E03: Colour fastness to chlorinated water (swimming-pool water),Textiles — Essais de solidité des teintures —
• ISO 105-E04:19873821,IS,,ISO 105-E04:1987,Textiles — Tests for colour fastness — Part E04: Colour fastness to perspiration,Textiles — Essais de solidité des teintures — Partie E04: Solidité des te
• ISO 105-E04:19893822,IS,,ISO 105-E04:1989,Textiles — Tests for colour fastness — Part E04: Colour fastness to perspiration,Textiles — Essais de solidité des teintures — Partie E04: Solidité des te
• ISO 105-E04:199421988,IS,,ISO 105-E04:1994,Textiles — Tests for colour fastness — Part E04: Colour fastness to perspiration,Textiles — Essais de solidité des teintures — Partie E04: Solidité des t
• ISO 105-E04:1994/Cor 1:200236372,IS,Cor,ISO 105-E04:1994/Cor 1:2002,Textiles — Tests for colour fastness — Part E04: Colour fastness to perspiration — Technical Corrigendum 1,Textiles — Essais de solidité de
• ISO 105-E04:200841374,IS,,ISO 105-E04:2008,Textiles — Tests for colour fastness — Part E04: Colour fastness to perspiration,Textiles — Essais de solidité des teintures — Partie E04: Solidité des t
• ISO 105-E05:19873824,IS,,ISO 105-E05:1987,Textiles — Tests for colour fastness — Part E05: Colour fastness to spotting : Acid,Textiles — Essais de solidité des teintures — Partie E05: Solidité des
• ISO 105-E05:19893825,IS,,ISO 105-E05:1989,Textiles — Tests for colour fastness — Part E05: Colour fastness to spotting: Acid,Textiles — Essais de solidité des teintures — Partie E05: Solidité des
• ISO 105-E05:1989/Cor 1:200236358,IS,Cor,ISO 105-E05:1989/Cor 1:2002,Textiles — Tests for colour fastness — Part E05: Colour fastness to spotting: Acid — Technical Corrigendum 1,Textiles — Essais de solidité
• ISO 105-E05:200640851,IS,,ISO 105-E05:2006,Textiles — Tests for colour fastness — Part E05: Colour fastness to spotting: Acid,Textiles — Essais de solidité des teintures — Partie E05: Solidité des
• ISO 105-E06:19873826,IS,,ISO 105-E06:1987,Textiles — Tests for colour fastness — Part E06: Colour fastness to spotting : Alkali,Textiles — Essais de solidité des teintures — Partie E06: Solidité d
• ISO 105-E06:19893827,IS,,ISO 105-E06:1989,Textiles — Tests for colour fastness — Part E06: Colour fastness to spotting: Alkali,Textiles — Essais de solidité des teintures — Partie E06: Solidité de
• ISO 105-E06:1989/Cor 1:200236366,IS,Cor,ISO 105-E06:1989/Cor 1:2002,Textiles — Tests for colour fastness — Part E06: Colour fastness to spotting: Alkali — Technical Corrigendum 1,Textiles — Essais de solidit
• ISO 105-E07:19873828,IS,,ISO 105-E07:1987,Textiles — Tests for colour fastness — Part E07: Colour fastness to spotting : Water,Textiles — Essais de solidité des teintures — Partie E07: Solidité de
• ISO 105-E07:19893829,IS,,ISO 105-E07:1989,Textiles — Tests for colour fastness — Part E07: Colour fastness to spotting: Water,Textiles — Essais de solidité des teintures — Partie E07: Solidité des
• ISO 105-E07:1989/Cor 1:200236367,IS,Cor,ISO 105-E07:1989/Cor 1:2002,Textiles — Tests for colour fastness — Part E07: Colour fastness to spotting: Water — Technical Corrigendum 1,Textiles — Essais de solidité
• ISO 105-E08:19873830,IS,,ISO 105-E08:1987,Textiles — Tests for colour fastness — Part E08: Colour fastness to water : Hot water,Textiles — Essais de soliité des teintures — Partie E08: Solidité de
• ISO 105-E09:19873831,IS,,ISO 105-E09:1987,Textiles — Tests for colour fastness — Part E09: Colour fastness to potting,Textiles — Essais de solidité des teintures — Partie E09: Solidité des teintur
• ISO 105-E09:19893832,IS,,ISO 105-E09:1989,Textiles — Tests for colour fastness — Part E09: Colour fastness to potting,Textiles — Essais de solidité des teintures — Partie E09: Solidité des teintur
• ISO 105-E09:1989/Cor 1:200236368,IS,Cor,ISO 105-E09:1989/Cor 1:2002,Textiles — Tests for colour fastness — Part E09: Colour fastness to potting — Technical Corrigendum 1,Textiles — Essais de solidité des tei
• ISO 105-E10:19873833,IS,,ISO 105-E10:1987,Textiles — Tests for colour fastness — Part E10: Colour fastness to decatizing,Textiles — Essais de solidité des teintures — Partie E10: Solidité des tein
• ISO 105-E11:19873834,IS,,ISO 105-E11:1987,Textiles — Tests for colour fastness — Part E11: Colour fastness to steaming,Textiles — Essais de solidité des teintures — Partie E11: Solidité des teintu
• ISO 105-E12:19873835,IS,,ISO 105-E12:1987,Textiles — Tests for colour fastness — Part E12: Colour fastness to milling : Alkaline milling,Textiles — Essais de solidité des teintures — Partie E12: S
• ISO 105-E12:19893836,IS,,ISO 105-E12:1989,Textiles — Tests for colour fastness — Part E12: Colour fastness to milling: Alkaline milling,Textiles — Essais de solidité des teintures — Partie E12: So
• ISO 105-E12:1989/Amd 1:200235282,IS,Amd,ISO 105-E12:1989/Amd 1:2002,Textiles — Tests for colour fastness — Part E12: Colour fastness to milling: Alkaline milling — Amendment 1,Textiles — Essais de solidité d
• ISO 105-E12:1989/Cor 1:200236369,IS,Cor,ISO 105-E12:1989/Cor 1:2002,Textiles — Tests for colour fastness — Part E12: Colour fastness to milling: Alkaline milling — Technical Corrigendum 1,Textiles — Essais d
• ISO 105-E13:19873837,IS,,ISO 105-E13:1987,Textiles — Tests for colour fastness — Part E13: Colour fastness to acid-felting : Severe,Textiles — Essais de solidité des teintures — Partie E13: Solidi
• ISO 105-E14:19873838,IS,,ISO 105-E14:1987,Textiles — Tests for colour fastness — Part E14: Colour fastness to acid-felting: Mild,Textiles — Essais de solidité des teintures — Partie E14: Solidité
• ISO 105-E:19783814,IS,,ISO 105-E:1978,Textiles — Tests for colour fastness — Part E: Colour fastness to aqueous agencies,Textiles — Essais de solidité des teintures — Partie E: Solidité des tein
• ISO 105-F:19823839,IS,,ISO 105-F:1982,Textiles — Tests for colour fastness — Part F: Standard adjacent fabrics,Textiles — Essais de solidité des teintures — Partie F: Tissus témoins,1982-09-01,2
• ISO 105-F:19853840,IS,,ISO 105-F:1985,Textiles — Tests for colour fastness — Part F: Standard adjacent fabrics,Textiles — Essais de solidité des teintures — Partie F: Tissus témoins,1985-10-24,3
• ISO 105-G01:199320026,IS,,ISO 105-G01:1993,Textiles — Tests for colour fastness — Part G01: Colour fastness to nitrogen oxides,Textiles — Essais de solidité des teintures — Partie G01: Solidité de
• ISO 105-G01:1993/Cor 1:199526419,IS,Cor,ISO 105-G01:1993/Cor 1:1995,Textiles — Tests for colour fastness — Part G01: Colour fastness to nitrogen oxides — Technical Corrigendum 1,Textiles — Essais de solidité
• ISO 105-G04:19893858,IS,,ISO 105-G04:1989,Textiles — Tests for colour fastness — Part G04: Colour fastness to oxides of nitrogen in the atmosphere at high humidities,Textiles — Essais de solidité
• ISO 105-G:19783854,IS,,ISO 105-G:1978,Textiles — Tests for colour fastness — Part G: Colour fastness to atmospheric contaminants,Textiles — Essais de solidité des teintures — Partie G: Solidité
• ISO 105-J01:19873860,IS,,ISO 105-J01:1987,Textiles — Tests for colour fastness — Part J01: Method for the measurement of colour and colour differences,Textiles — Essais de solidité des teintures —
• ISO 105-J01:19893861,IS,,ISO 105-J01:1989,Textiles — Tests for colour fastness — Part J01: Measurement of colour and colour differences,Textiles — Essais de solidité des teintures — Partie J01: Mé
• ISO 105-J02:19873863,IS,,ISO 105-J02:1987,Textiles — Tests for colour fastness — Part J02: Method for the instrumental assessment of whiteness,Textiles — Essais de solidité des teintures — Partie
• ISO 105-J03:199522751,IS,,ISO 105-J03:1995,Textiles — Tests for colour fastness — Part J03: Calculation of colour differences,Textiles — Essais de solidité des teintures — Partie J03: Calcul des é
• ISO 105-J03:1995/Cor 1:199627268,IS,Cor,ISO 105-J03:1995/Cor 1:1996,Textiles — Tests for colour fastness — Part J03: Calculation of colour differences — Technical Corrigendum 1,Textiles — Essais de solidité
• ISO 105-J03:1995/Cor 2:200644088,IS,Cor,ISO 105-J03:1995/Cor 2:2006,Textiles — Tests for colour fastness — Part J03: Calculation of colour differences — Technical Corrigendum 2,Textiles — Essais de solidité
• ISO 105-J:19823859,IS,,ISO 105-J:1982,Textiles — Tests for colour fastness — Part J: Measurement of colour and colour differences,Textiles — Essais de solidité des teintures — Partie J: Mesurage
• ISO 105-N:19783864,IS,,ISO 105-N:1978,Textiles — Tests for colour fastness — Part N: Colour fastness to bleaching agencies,Textiles — Essais de solidité des teintures — Partie N: Solidité des te
• ISO 105-P02:19933872,IS,,ISO 105-P02:1993,Textiles — Tests for colour fastness — Part P02: Colour fastness to pleating: Steam pleating,Textiles — Essais de solidité des teintures — Partie P02: Sol
• ISO 105-P02:1993/Cor 1:199931912,IS,Cor,ISO 105-P02:1993/Cor 1:1999,Textiles — Tests for colour fastness — Part P02: Colour fastness to pleating: Steam pleating — Technical Corrigendum 1,Textiles — Essais de
• ISO 105-P:19783870,IS,,ISO 105-P:1978,Textiles — Tests for colour fastness — Part P: Colour fastness to heat treatments,Textiles — Essais de solidité des teintures — Partie P: Solidité des teint
• ISO 105-S:19783873,IS,,ISO 105-S:1978,Textiles — Tests for colour fastness — Part S: Colour fastness to vulcanizing,Textiles — Essais de solidité des teintures — Partie S: Solidité des teintures
• ISO 105-X01:19873878,IS,,ISO 105-X01:1987,Textiles — Tests for colour fastness — Part X01: Colour fastness to carbonizing : Aluminium chloride,Textiles — Essais de solidité des teintures — Partie
• ISO 105-X02:19873879,IS,,ISO 105-X02:1987,Textiles — Tests for colour fastness — Part X02: Colour fastness to carbonizing: Sulphuric acid,Textiles — Essais de solidité des teintures — Partie X02:
• ISO 105-X04:19873881,IS,,ISO 105-X04:1987,Textiles — Tests for colour fastness — Part X04: Colour fastness to mercerizing,Textiles — Essais de solidité des teintures — Partie X04: Solidité des tei
• ISO 105-X05:19873882,IS,,ISO 105-X05:1987,Textiles — Tests for colour fastness — Part X05: Colour fastness to organic solvents,Textiles — Essais de solidité des teintures — Partie X05: Solidité de
• ISO 105-X06:19873883,IS,,ISO 105-X06:1987,Textiles — Tests for colour fastness — Part X06: Colour fastness to soda boiling,Textiles — Essais de solidité des teintures — Partie X06: Solidité des te
• ISO 105-X07:19873884,IS,,ISO 105-X07:1987,Textiles — Tests for colour fastness — Part X07: Colour fastness to cross-dyeing : Wool,Textiles — Essais de solidité des teintures — Partie X07: Solidité
• ISO 105-X08:19873885,IS,,ISO 105-X08:1987,Textiles — Tests for colour fastness — Part X08: Colour fastness to degumming,Textiles — Essais de solidité des teintures — Partie X08: Solidité des teint
• ISO 105-X09:19873886,IS,,ISO 105-X09:1987,Textiles — Tests for colour fastness — Part X09: Colour fastness to formaldehyde,Textiles — Essais de solidité des teintures — Partie X09: Solidité des te
• ISO 105-X10:19873887,IS,,ISO 105-X10:1987,Textiles — Tests for colour fastness — Part X10: Assessment of migration of textile colours into polyvinyl chloride coatings,Textiles — Essais de solidité
• ISO 105-X11:19873888,IS,,ISO 105-X11:1987,Textiles — Tests for colour fastness — Part X11: Colour fastness to hot pressing,Textiles — Essais de solidité des teintures — Partie X11: Solidité des te
• ISO 105-X11:199421307,IS,,ISO 105-X11:1994,Textiles — Tests for colour fastness — Part X11: Colour fastness to hot pressing,Textiles — Essais de solidité des teintures — Partie X11: Solidité des t
• ISO 105-X12:19873889,IS,,ISO 105-X12:1987,Textiles — Tests for colour fastness — Part X12: Colour fastness to rubbing,Textiles — Essais de solidité des teintures — Partie X12: Solidité des teintur
• ISO 105-X12:199320029,IS,,ISO 105-X12:1993,Textiles — Tests for colour fastness — Part X12: Colour fastness to rubbing,Textiles — Essais de solidité des teintures — Partie X12: Solidité des teintu
• ISO 105-X12:200132339,IS,,ISO 105-X12:2001,Textiles — Tests for colour fastness — Part X12: Colour fastness to rubbing,Textiles — Essais de solidité des teintures — Partie X12: Solidité des teintu
• ISO 105-X13:19873891,IS,,ISO 105-X13:1987,"Textiles — Tests for colour fastness — Part X13: Colour fastness of wool dyes to processes using chemical means for creasing, pleating and setting",Texti
• ISO 105-X14:19873892,IS,,ISO 105-X14:1987,Textiles — Tests for colour fastness — Part X14: Colour fastness to acid chlorination of wool : Sodium dichloroisocyanurate,Textiles — Essais de solidité
• ISO 105-X16:200132343,IS,,ISO 105-X16:2001,Textiles — Tests for colour fastness — Part X16: Colour fastness to rubbing — Small areas,Textiles — Essais de solidité des teintures — Partie X16: Solid
• ISO 105-X:19843877,IS,,ISO 105-X:1984,Textiles — Tests for colour fastness — Part X: Tests not included in parts A to S or part Z,Textiles — Essais de solidité des teintures — Partie X: Solidité
• ISO 105-Z:19783894,IS,,ISO 105-Z:1978,Textiles — Tests for colour fastness — Part Z: Colorant characteristics,Textiles — Essais de solidité des teintures — Partie Z: Caractéristiques des coloran
• ISO 111:19783911,IS,,ISO 111:1978,Textile machinery and accessories — Cones for yarn winding (cross wound) — Half angle of the cone 4 degrees 20',Matériel pour l'industrie textile — Cônes pour
• ISO 112:19833912,IS,,ISO 112:1983,Textile machinery and accessories — Cones for yarn winding (cross wound) — Half angle of the cone 3 degrees 30',Matériel pour l'industrie textile — Cônes pour
• ISO 113-1:19793913,IS,,ISO 113-1:1979,Rolling bearing accessories — Part 1: Tapered sleeves,Accessoires de roulements — Partie 1: Manchons coniques,1979-04-01,1,['21.100.20'],ISO/TC 4,9599,,"[20
• ISO 113-2:19793914,IS,,ISO 113-2:1979,Rolling bearing accessories — Part 2: Plummer block housings,Accessoires de roulements — Partie 2: Paliers,1979-02-01,1,['21.100.20'],ISO/TC 4,9599,,[20520]
• ISO 113:199420520,IS,,ISO 113:1994,Rolling bearings — Plummer block housings — Boundary dimensions,Roulements — Paliers — Dimensions d'encombrement,1994-12-15,1,['21.100.20'],ISO/TC 4,9599,"[3
• ISO 113:199926511,IS,,ISO 113:1999,Rolling bearings — Plummer block housings — Boundary dimensions,Roulements — Paliers — Dimensions d'encombrement,1999-03-18,2,['21.100.20'],ISO/TC 4,9599,[20
• ISO 114:19803915,IS,,ISO 114:1980,99.8 Unalloyed magnesium ingots — Chemical composition,"Lingots en magnésium non allié 99,8 — Composition chimique",1980-06-01,1,['77.120.20'],ISO/TC 79/SC 5,
• ISO 115:200334681,IS,,ISO 115:2003,Unalloyed aluminium ingots for remelting — Classification and composition,Aluminium non allié en lingots pour refusion — Classification et composition,2003-1
• ISO 121:19803923,IS,,ISO 121:1980,Magnesium-aluminium-zinc alloy ingots and alloy castings — Chemical composition and mechanical properties of sand cast reference test bars,Lingots et pièces m
• ISO 123:19743925,IS,,ISO 123:1974,Rubber latex — Sampling,Latex d'élastomère — Échantillonnage,1974-01-01,1,['83.040.10'],ISO/TC 45,9599,,[3926],"['en','fr']",2
• ISO 123:19853926,IS,,ISO 123:1985,Rubber latex — Sampling,Latex de caoutchouc — Échantillonnage,1985-08-01,2,['83.040.10'],ISO/TC 45/SC 3,9599,[3925],[23281],"['en','fr']",4
• ISO 124:19743927,IS,,ISO 124:1974,Rubber latices — Determination of total solids content,Latex d'élastomère — Détermination des matières solides totales,1974-04-01,1,['83.040.10'],ISO/TC 45,95
• ISO 124:19853928,IS,,ISO 124:1985,Rubber latices — Determination of total solids content,Latex de caoutchouc — Détermination des matières solides totales,1985-10-31,2,['83.040.10'],ISO/TC 45/S
• ISO 124:19923929,IS,,ISO 124:1992,Rubber latices — Determination of total solids content,Latex de caoutchouc — Détermination des matières solides totales,1992-03-05,3,['83.040.10'],ISO/TC 45/S
• ISO 124:199723842,IS,,ISO 124:1997,"Latex, rubber — Determination of total solids content",Latex de caoutchouc — Détermination des matières solides totales,1997-06-05,4,['83.040.10'],ISO/TC 45
• ISO 124:1997/Amd 1:200642824,IS,Amd,ISO 124:1997/Amd 1:2006,"Latex, rubber — Determination of total solids content — Amendment 1: Precision data",Latex de caoutchouc — Détermination des matières solides
• ISO 124:1997/Amd 2:200843711,IS,Amd,ISO 124:1997/Amd 2:2008,"Latex, rubber — Determination of total solids content — Amendment 2: Determination at temperatures higher than 105 degrees C",Latex de caoutch
• ISO 124:200851088,IS,,ISO 124:2008,"Latex, rubber — Determination of total solids content",Latex de caoutchouc — Détermination des matières solides totales,2008-09-10,5,['83.040.10'],ISO/TC 45
• ISO 124:201159264,IS,,ISO 124:2011,"Latex, rubber — Determination of total solids content",Latex de caoutchouc — Détermination des matières solides totales,2011-11-10,6,['83.040.10'],ISO/TC 45
• ISO 125:19833930,IS,,ISO 125:1983,"Rubber latex, natural — Determination of alkalinity",Latex de caoutchouc — Détermination de l'alcalinité,1983-12-01,3,['83.040.10'],ISO/TC 45/SC 3,9599,,[393
• ISO 125:19903931,IS,,ISO 125:1990,Natural rubber latex concentrate — Determination of alkalinity,Latex concentré de caoutchouc naturel — Détermination de l'alcalinité,1990-01-18,4,['83.040.10'
• ISO 125:200327006,IS,,ISO 125:2003,Natural rubber latex concentrate — Determination of alkalinity,Concentré de latex de caoutchouc naturel — Détermination de l'alcalinité,2003-07-29,5,['83.040
• ISO 125:201159265,IS,,ISO 125:2011,Natural rubber latex concentrate — Determination of alkalinity,Latex concentré de caoutchouc naturel — Détermination de l'alcalinité,2011-11-10,6,['83.040.10
• ISO 126:19823932,IS,,ISO 126:1982,"Rubber latex, natural — Determination of dry rubber content",Latex de caoutchouc — Détermination de la teneur en caoutchouc sec,1982-05-01,2,['83.040.10'],IS
• ISO 126:19893933,IS,,ISO 126:1989,Natural rubber latex concentrate — Determination of dry rubber content,Latex de caoutchouc naturel concentré — Détermination de la teneur en caoutchouc sec,19
• ISO 126:1989/Cor 1:199220885,IS,Cor,ISO 126:1989/Cor 1:1992,Natural rubber latex concentrate — Determination of dry rubber content — Technical Corrigendum 1,Latex de caoutchouc naturel concentré — Déterm
• ISO 126:199525530,IS,,ISO 126:1995,"Latex, rubber, natural concentrate — Determination of dry rubber content",Latex de caoutchouc naturel concentré — Détermination de la teneur en caoutchouc s
• ISO 127:19723934,IS,,ISO 127:1972,Natural rubber latex — Determination of KOH number,Latex de caoutchouc — Détermination de l'indice de potasse,1972-08-01,1,['83.040.10'],ISO/TC 45,9599,,"[393
• ISO 127:19843935,IS,,ISO 127:1984,"Rubber latex, natural — Determination of KOH number",Latex de caoutchouc naturel — Détermination de l'indice de potasse,1984-04-01,2,['83.040.10'],ISO/TC 45/
• ISO 127:19953936,IS,,ISO 127:1995,"Rubber, natural latex concentrate — Determination of KOH number",Latex concentré de caoutchouc naturel — Détermination de l'indice de potasse,1995-11-23,3,['
• ISO 127:1995/Amd 1:200642826,IS,Amd,ISO 127:1995/Amd 1:2006,"Rubber, natural latex concentrate — Determination of KOH number — Amendment 1: Precision data",Latex concentré de caoutchouc naturel — Détermi
• ISO 127:201257896,IS,,ISO 127:2012,"Rubber, natural latex concentrate — Determination of KOH number",Latex concentré de caoutchouc naturel — Détermination de l'indice de potasse,2012-04-04,4,[
• ISO 128-1:200332462,IS,,ISO 128-1:2003,Technical drawings — General principles of presentation — Part 1: Introduction and index,Dessins techniques — Principes généraux de représentation — Partie
• ISO 128-2:202069129,IS,,ISO 128-2:2020,Technical product documentation (TPD) — General principles of representation — Part 2: Basic conventions for lines,Documentation technique de produits (TPD
• ISO 128-3:202069130,IS,,ISO 128-3:2020,"Technical product documentation (TPD) — General principles of representation — Part 3: Views, sections and cuts","Documentation technique de produits (TPD
• ISO 128-20:19961408,IS,,ISO 128-20:1996,Technical drawings — General principles of presentation — Part 20: Basic conventions for lines,Dessins techniques — Principes généraux de représentation —

All of Withdrawn and superseded ISO standards · records 401 on →