Records 14,001–14,400 — Withdrawn and superseded ISO standards

Records 14,001 to 14,400 of 24,640. Each links to its own page, which carries the source URL and the quoted line that states the value.

• ISO 11997-1:201764859,IS,,ISO 11997-1:2017,Paints and varnishes — Determination of resistance to cyclic corrosion conditions — Part 1: Wet (salt fog)/dry/humid,Peintures et vernis — Détermination
• ISO 11997-2:200028784,IS,,ISO 11997-2:2000,Paints and varnishes — Determination of resistance to cyclic corrosion conditions — Part 2: Wet (salt fog)/dry/humidity/UV light,Peintures et vernis — Dé
• ISO 11997-2:201356808,IS,,ISO 11997-2:2013,Paints and varnishes — Determination of resistance to cyclic corrosion conditions — Part 2: Wet (salt fog)/dry/humidity/UV light,Peintures et vernis — Dé
• ISO 11998:199820631,IS,,ISO 11998:1998,Paints and varnishes — Determination of wet-scrub resistance and cleanability of coatings,Peintures et vernis — Détermination de la résistance au frottemen
• ISO 11999-1:201564017,IS,,ISO 11999-1:2015,PPE for firefighters — Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while f
• ISO 11999-3:201564019,IS,,ISO 11999-3:2015,PPE for firefighters — Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while f
• ISO 11999-4:201564020,IS,,ISO 11999-4:2015,PPE for firefighters — Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while f
• ISO 11999-5:201560192,IS,,ISO 11999-5:2015,PPE for firefighters — Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while f
• ISO 11999-6:201660193,IS,,ISO 11999-6:2016,PPE for firefighters — Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while f
• ISO 11999-9:201660196,IS,,ISO 11999-9:2016,PPE for firefighters — Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while f
• ISO 12000:199619692,IS,,ISO 12000:1996,Plastics/rubber — Polymer dispersions and rubber latices (natural and synthetic) — Definitions and review of test methods,Plastiques/caoutchouc — Dispersio
• ISO 12000:200032866,IS,,ISO 12000:2000,Plastics/rubber — Polymer dispersions and rubber latices (natural and synthetic) — Definitions and review of test methods,Plastiques/caoutchouc — Dispersio
• ISO 12003-1:200227783,IS,,ISO 12003-1:2002,Agricultural and forestry tractors — Narrow-track wheeled tractors — Part 1: Front-mounted roll-over protective structures,Tracteurs agricoles et foresti
• ISO 12003-1:200842459,IS,,ISO 12003-1:2008,Agricultural and forestry tractors — Roll-over protective structures on narrow-track wheeled tractors — Part 1: Front-mounted ROPS,Tracteurs agricoles et
• ISO 12003-2:200227784,IS,,ISO 12003-2:2002,Agricultural and forestry tractors — Narrow-track wheeled tractors — Part 2: Rear-mounted roll-over protective structures,Tracteurs agricoles et forestie
• ISO 12003-2:200842157,IS,,ISO 12003-2:2008,Agricultural and forestry tractors — Roll-over protective structures on narrow-track wheeled tractors — Part 2: Rear-mounted ROPS,Tracteurs agricoles et
• ISO 12004-1:200838369,IS,,ISO 12004-1:2008,Metallic materials — Sheet and strip — Determination of forming-limit curves — Part 1: Measurement and application of forming-limit diagrams in the press
• ISO 12004-2:200843621,IS,,ISO 12004-2:2008,Metallic materials — Sheet and strip — Determination of forming-limit curves — Part 2: Determination of forming-limit curves in the laboratory,Matériaux
• ISO 12004:19973140,IS,,ISO 12004:1997,Metallic materials — Guidelines for the determination of forming-limit diagrams,Matériaux métalliques — Lignes directrices pour la détermination de diagram
• ISO 12005:199920633,IS,,ISO 12005:1999,Lasers and laser-related equipment — Test methods for laser beam parameters — Polarization,Lasers et équipements associés aux lasers — Méthodes d'essai des
• ISO 12005:200331277,IS,,ISO 12005:2003,Lasers and laser-related equipment — Test methods for laser beam parameters — Polarization,Lasers et équipements associés aux lasers — Méthodes d'essai des
• ISO 12006-2:200135333,IS,,ISO 12006-2:2001,Building construction — Organization of information about construction works — Part 2: Framework for classification of information,Construction immobiliè
• ISO 12006-3:200738706,IS,,ISO 12006-3:2007,Building construction — Organization of information about construction works — Part 3: Framework for object-oriented information,Construction immobilière
• ISO 12010:201251124,IS,,ISO 12010:2012,Water quality — Determination of short-chain polychlorinated alkanes (SCCPs) in water — Method using gas chromatography-mass spectrometry (GC-MS) and negat
• ISO 12017:199520761,IS,,ISO 12017:1995,Plastics — Poly(methyl methacrylate) double- and triple-skin sheets — Test methods,Plastiques — Plaques de poly(méthacrylate de méthyle) à double et triple
• ISO 12021-1:19961063,IS,,ISO 12021-1:1996,Road vehicles — Sensitivity to lateral wind — Part 1: Open-loop test method using wind generator input,Véhicules routiers — Sensibilité au vent latéral —
• ISO 12039:200120797,IS,,ISO 12039:2001,"Stationary source emissions — Determination of the mass concentration of carbon monoxide, carbon dioxide and oxygen in flue gas — Performance characterist
• ISO 12043:199520913,IS,,ISO 12043:1995,Rolling bearings — Single-row cylindrical roller bearings — Chamfer dimensions for loose rib and non-rib sides,Roulements — Roulements à rouleaux cylindriq
• ISO 12044:199520914,IS,,ISO 12044:1995,Rolling bearings — Single-row angular contact ball bearings — Chamfer dimensions for outer ring non-thrust side,Roulements — Roulements à billes à contact
• ISO 12046:199520804,IS,,ISO 12046:1995,Synchronous belt drives — Automotive belts — Determination of physical properties,Transmissions synchrones par courroies — Courroies pour la construction a
• ISO 12046:201241585,IS,,ISO 12046:2012,Synchronous belt drives — Automotive belts — Determination of physical properties,Transmissions synchrones par courroies — Courroies pour la construction a
• ISO 12052:200643218,IS,,ISO 12052:2006,Health informatics — Digital imaging and communication in medicine (DICOM) including workflow and data management,Informatique de santé — Imagerie numériqu
• ISO 12052:201772941,IS,,ISO 12052:2017,Health informatics — Digital imaging and communication in medicine (DICOM) including workflow and data management,Informatique de santé — Imagerie numériqu
• ISO 12058-1:199720843,IS,,ISO 12058-1:1997,Plastics — Determination of viscosity using a falling-ball viscometer — Part 1: Inclined-tube method,Plastiques — Détermination de la viscosité au moyen
• ISO 12080-1:200033051,IS,,ISO 12080-1:2000,Dried skimmed milk — Determination of vitamin A content — Part 1: Colorimetric method,Lait écrémé en poudre — Détermination de la teneur en vitamine A —
• ISO 12080-2:200028812,IS,,ISO 12080-2:2000,Dried skimmed milk — Determination of vitamin A content — Part 2: Method using high-performance liquid chromatography,Lait écrémé en poudre — Déterminati
• ISO 12081:199820877,IS,,ISO 12081:1998,Milk — Determination of calcium content — Titrimetric method,Lait — Détermination de la teneur en calcium — Méthode titrimétrique,1998-12-20,1,['67.100.10'
• ISO 12082:199720862,IS,,ISO 12082:1997,"Processed cheese and processed cheese products — Calculation of the content of added citrate emulsifying agents and acidifiers/pH-controlling agents, expr
• ISO 12086-1:19951997,IS,,ISO 12086-1:1995,Plastics — Fluoropolymer dispersions and moulding and extrusion materials — Part 1: Designation system and basis for specifications,Plastiques — Polymères
• ISO 12086-1:200637662,IS,,ISO 12086-1:2006,Plastics — Fluoropolymer dispersions and moulding and extrusion materials — Part 1: Designation system and basis for specifications,Plastiques — Polymère
• ISO 12086-1:2006/Cor 1:200644486,IS,Cor,ISO 12086-1:2006/Cor 1:2006,Plastics — Fluoropolymer dispersions and moulding and extrusion materials — Part 1: Designation system and basis for specifications — Techn
• ISO 12086-2:199521016,IS,,ISO 12086-2:1995,Plastics — Fluoropolymer dispersions and moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties,Plastiq
• ISO 12086-2:200637663,IS,,ISO 12086-2:2006,Plastics — Fluoropolymer dispersions and moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties,Plastiq
• ISO 12086-2:2006/Cor 1:200644487,IS,Cor,ISO 12086-2:2006/Cor 1:2006,Plastics — Fluoropolymer dispersions and moulding and extrusion materials — Part 2: Preparation of test specimens and determination of prop
• ISO 12092:200023581,IS,,ISO 12092:2000,"Fittings, valves and other piping system components made of unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C), acrylon
• ISO 12094:19941336,IS,,ISO 12094:1994,Welded steel tubes for pressure purposes — Ultrasonic testing for the detection of laminar imperfections in strips/plates used in the manufacture of welded
• ISO 12095:19941300,IS,,ISO 12095:1994,Seamless and welded steel tubes for pressure purposes — Liquid penetrant testing,Tubes en acier sans soudure et soudés pour service sous pression — Contrôle
• ISO 12096:199621552,IS,,ISO 12096:1996,Submerged arc-welded steel tubes for pressure purposes — Radiographic testing of the weld seam for the detection of imperfections,Tubes en acier soudés à l
• ISO 12098:199421687,IS,,ISO 12098:1994,Commercial vehicles with 24 V systems — 15-pole connectors between towing vehicles and trailers — Dimensions and contact allocation,Véhicules utilitaires é
• ISO 12098:1994/Cor 1:200134996,IS,Cor,ISO 12098:1994/Cor 1:2001,Commercial vehicles with 24 V systems — 15-pole connectors between towing vehicles and trailers — Dimensions and contact allocation — Technic
• ISO 12098:200430203,IS,,ISO 12098:2004,Road vehicles — Connectors for the electrical connection of towing and towed vehicles — 15-pole connector for vehicles with 24 V nominal supply voltage,Véh
• ISO 12099:201051197,IS,,ISO 12099:2010,"Animal feeding stuffs, cereals and milled cereal products — Guidelines for the application of near infrared spectrometry","Aliments des animaux, céréales
• ISO 12100-1:200327239,IS,,ISO 12100-1:2003,"Safety of machinery — Basic concepts, general principles for design — Part 1: Basic terminology, methodology","Sécurité des machines — Notions fondament
• ISO 12100-1:2003/Amd 1:200946576,IS,Amd,ISO 12100-1:2003/Amd 1:2009,"Safety of machinery — Basic concepts, general principles for design — Part 1: Basic terminology, methodology — Amendment 1","Sécurité des
• ISO 12100-2:200327240,IS,,ISO 12100-2:2003,"Safety of machinery — Basic concepts, general principles for design — Part 2: Technical principles","Sécurité des machines — Notions fondamentales, prin
• ISO 12100-2:2003/Amd 1:200946575,IS,Amd,ISO 12100-2:2003/Amd 1:2009,"Safety of machinery — Basic concepts, general principles for design — Part 2: Technical principles — Amendment 1","Sécurité des machines —
• ISO 12103-1:199727059,IS,,ISO 12103-1:1997,Road vehicles — Test dust for filter evaluation — Part 1: Arizona test dust,Véhicules routiers — Poussière pour l'essai des filtres — Partie 1: Poussière
• ISO 12103-1:201663386,IS,,ISO 12103-1:2016,Road vehicles — Test contaminants for filter evaluation — Part 1: Arizona test dust,Véhicules routiers — Poussière pour l'essai des filtres — Partie 1: P
• ISO 12106:200332452,IS,,ISO 12106:2003,Metallic materials — Fatigue testing — Axial-strain-controlled method,Matériaux métalliques — Essais de fatigue — Méthode par déformation axiale contrôlée,
• ISO 12107:200332453,IS,,ISO 12107:2003,Metallic materials — Fatigue testing — Statistical planning and analysis of data,Matériaux métalliques — Essais de fatigue — Programmation et analyse stati
• ISO 12108:200232834,IS,,ISO 12108:2002,Metallic materials — Fatigue testing — Fatigue crack growth method,Matériaux métalliques — Essais de fatigue — Méthode d'essai de propagation de fissure en
• ISO 12108:201242815,IS,,ISO 12108:2012,Metallic materials — Fatigue testing — Fatigue crack growth method,Matériaux métalliques — Essais de fatigue — Méthode d'essai de propagation de fissure en
• ISO 12123:19962416,IS,,ISO 12123:1996,Raw optical glass in bulk and preshaped forms — Bubbles and other inclusions — Test method and classification,Verre d'optique brut sous forme de bloc et pré
• ISO 12123:1996/Amd 1:200538781,IS,Amd,ISO 12123:1996/Amd 1:2005,Raw optical glass in bulk and preshaped forms — Bubbles and other inclusions — Test method and classification — Amendment 1,Verre d'optique b
• ISO 12123:201045848,IS,,ISO 12123:2010,Optics and photonics — Specification of raw optical glass,Optique et photonique — Spécification d'un verre d'optique brut,2010-03-15,2,['81.040.10'],ISO/TC
• ISO 12125:199721024,IS,,ISO 12125:1997,Prevailing torque type hexagon nuts with flange (with non-metallic insert) with metric fine pitch thread — Product grades A and B,"Écrous hexagonaux à emba
• ISO 12126:199721025,IS,,ISO 12126:1997,Prevailing torque type all-metal hexagon nuts with flange with metric fine pitch thread — Product grades A and B,"Écrous hexagonaux à embase, autofreinés,
• ISO 12127-1:200745865,IS,,ISO 12127-1:2007,Clothing for protection against heat and flame — Determination of contact heat transmission through protective clothing or constituent materials — Part 1
• ISO 12127:19962500,IS,,ISO 12127:1996,Clothing for protection against heat and flame — Determination of contact heat transmission through protective clothing or constituent materials,Vêtements d
• ISO 12128:199520995,IS,,ISO 12128:1995,"Plain bearings — Lubrication holes, grooves and pockets — Dimensions, types, designation and their application to bearing bushes","Paliers lisses — Trous,
• ISO 12128:200134774,IS,,ISO 12128:2001,"Plain bearings — Lubrication holes, grooves and pockets — Dimensions, types, designation and their application to bearing bushes","Paliers lisses — Trous,
• ISO 12129-1:199520996,IS,,ISO 12129-1:1995,Plain bearings — Part 1: Fits,Paliers lisses — Partie 1: Ajustements,1995-03-30,1,['21.100.10'],ISO/TC 123/SC 3,9599,,[75926],"['en','fr']",4
• ISO 12129-1:201975926,IS,,ISO 12129-1:2019,Plain bearings — Tolerances — Part 1: Fits,Paliers lisses — Tolérances — Partie 1: Ajustements,2019-03-20,2,['21.100.10'],ISO/TC 123/SC 3,9599,[20996],[8
• ISO 12129-2:199521337,IS,,ISO 12129-2:1995,"Plain bearings — Part 2: Tolerances on form and position and surface roughness for shafts, flanges and thrust collars","Paliers lisses — Partie 2: Tolér
• ISO 12130-1:200135256,IS,,ISO 12130-1:2001,Plain bearings — Hydrodynamic plain tilting pad thrust bearings under steady-state conditions — Part 1: Calculation of tilting pad thrust bearings,Palier
• ISO 12130-2:200126865,IS,,ISO 12130-2:2001,Plain bearings — Hydrodynamic plain tilting pad thrust bearings under steady-state conditions — Part 2: Functions for calculation of tilting pad thrust b
• ISO 12130-2:201363680,IS,,ISO 12130-2:2013,Plain bearings — Hydrodynamic plain tilting pad thrust bearings under steady-state conditions — Part 2: Functions for calculation of tilting pad thrust b
• ISO 12130-3:200126866,IS,,ISO 12130-3:2001,Plain bearings — Hydrodynamic plain tilting pad thrust bearings under steady-state conditions — Part 3: Guide values for the calculation of tilting pad t
• ISO 12131-1:200120999,IS,,ISO 12131-1:2001,Plain bearings — Hydrodynamic plain thrust pad bearings under steady-state conditions — Part 1: Calculation of thrust pad bearings,Paliers lisses — Butée
• ISO 12131-2:200126867,IS,,ISO 12131-2:2001,Plain bearings — Hydrodynamic plain thrust pad bearings under steady-state conditions — Part 2: Functions for the calculation of thrust pad bearings,Pali
• ISO 12131-2:201670385,IS,,ISO 12131-2:2016,Plain bearings — Hydrodynamic plain thrust pad bearings under steady-state conditions — Part 2: Functions for the calculation of thrust pad bearings,Pali
• ISO 12131-3:200126868,IS,,ISO 12131-3:2001,Plain bearings — Hydrodynamic plain thrust pad bearings under steady-state conditions — Part 3: Guide values for the calculation of thrust pad bearings,P
• ISO 12132:199920998,IS,,ISO 12132:1999,Plain bearings — Quality assurance of thin- walled half bearings — Design FMEA,Paliers lisses — Assurance qualité des demi-coussinets minces — AMDE à la c
• ISO 12133:201151225,IS,,ISO 12133:2011,Small craft — Carbon monoxide (CO) detection systems,Petits navires — Systèmes de détection de monoxyde de carbone (CO),2011-12-06,1,['47.080'],ISO/TC 188,
• ISO 12135:200235554,IS,,ISO 12135:2002,Metallic materials — Unified method of test for the determination of quasistatic fracture toughness,Matériaux métalliques — Méthode unifiée d'essai pour la
• ISO 12135:2002/Cor 1:200851353,IS,Cor,ISO 12135:2002/Cor 1:2008,Metallic materials — Unified method of test for the determination of quasistatic fracture toughness — Technical Corrigendum 1,Matériaux métal
• ISO 12135:201660891,IS,,ISO 12135:2016,Metallic materials — Unified method of test for the determination of quasistatic fracture toughness,Matériaux métalliques — Méthode unifiée d'essai pour la
• ISO 12137-1:199720462,IS,,ISO 12137-1:1997,Paints and varnishes — Determination of mar resistance — Part 1: Method using a curved stylus,Peintures et vernis — Détermination de la résistance à la d
• ISO 12137-1:1997/Cor 1:199831309,IS,Cor,ISO 12137-1:1997/Cor 1:1998,Paints and varnishes — Determination of mar resistance — Part 1: Method using a curved stylus — Technical Corrigendum 1,Peintures et vernis
• ISO 12137-2:199723681,IS,,ISO 12137-2:1997,Paints and varnishes — Determination of mar resistance — Part 2: Method using a pointed stylus,Peintures et vernis — Détermination de la résistance à la
• ISO 12138:199621012,IS,,ISO 12138:1996,Textiles — Domestic laundering procedures for textile fabrics prior to flammability testing,Textiles — Méthodes de lavage domestique des étoffes en vue des
• ISO 12140:19981644,IS,,ISO 12140:1998,Agricultural machinery — Agricultural trailers and trailed equipment — Drawbar jacks,Matériel agricole — Remorques agricoles et matériel traîné — Béquilles
• ISO 12140:201356210,IS,,ISO 12140:2013,Agricultural machinery — Agricultural trailers and trailed equipment — Drawbar jacks,Matériel agricole — Remorques agricoles et matériel traîné — Béquilles
• ISO 12141:200221011,IS,,ISO 12141:2002,Stationary source emissions — Determination of mass concentration of particulate matter (dust) at low concentrations — Manual gravimetric method,Émissions
• ISO 12145:199821041,IS,,ISO 12145:1998,Resistance welding equipment — Angles for mounting spot welding electrodes,Équipement de soudage par résistance — Angles utilisés pour le montage d'électro
• ISO 12151-1:199921026,IS,,ISO 12151-1:1999,Connections for hydraulic fluid power and general use — Hose fittings — Part 1: Hose fittings with ISO 8434-3 O-ring face seal ends,Raccordements pour tr
• ISO 12151-2:200334963,IS,,ISO 12151-2:2003,Connections for hydraulic fluid power and general use — Hose fittings — Part 2: Hose fittings with ISO 8434-1 and ISO 8434-4 24 degree cone connector end
• ISO 12151-3:199924694,IS,,ISO 12151-3:1999,Connections for hydraulic fluid power and general use — Hose fittings — Part 3: Hose fittings with ISO 6162 flange ends,Raccordements pour transmissions
• ISO 12151-3:201041896,IS,,ISO 12151-3:2010,Connections for hydraulic fluid power and general use — Hose fittings — Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends,Raccordements pou
• ISO 12153:201151250,IS,,ISO 12153:2011,Welding consumables — Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of nickel and nickel alloys — Classification,Produit
• ISO 12156-1:199720647,IS,,ISO 12156-1:1997,Diesel fuel — Assessment of lubricity using the high-frequency reciprocating rig (HFRR) — Part 1: Test method,Carburant diesel — Évaluation du pouvoir lu
• ISO 12156-1:1997/Cor 1:199830384,IS,Cor,ISO 12156-1:1997/Cor 1:1998,Diesel fuel — Assessment of lubricity using the high-frequency reciprocating rig (HFRR) — Part 1: Test method — Technical Corrigendum 1,Car
• ISO 12156-1:200639783,IS,,ISO 12156-1:2006,Diesel fuel — Assessment of lubricity using the high-frequency reciprocating rig (HFRR) — Part 1: Test method,Carburant diesel — Évaluation du pouvoir lu
• ISO 12156-1:201665227,IS,,ISO 12156-1:2016,Diesel fuel — Assessment of lubricity using the high-frequency reciprocating rig (HFRR) — Part 1: Test method,Carburant diesel — Évaluation du pouvoir lu
• ISO 12156-1:201872481,IS,,ISO 12156-1:2018,Diesel fuel — Assessment of lubricity using the high-frequency reciprocating rig (HFRR) — Part 1: Test method,Carburant diesel — Évaluation du pouvoir lu
• ISO 12156-2:199825891,IS,,ISO 12156-2:1998,Diesel fuel — Assessment of lubricity using the high-frequency reciprocating rig (HFRR) — Part 2: Limit,Carburant diesel — Évaluation du pouvoir lubrifia
• ISO 12156-2:200739784,IS,,ISO 12156-2:2007,Diesel fuel — Assessment of lubricity using the high-frequency reciprocating rig (HFRR) — Part 2: Limit,Carburant diesel — Évaluation du pouvoir lubrifia
• ISO 12162:199521062,IS,,ISO 12162:1995,Thermoplastics materials for pipes and fittings for pressure applications — Classification and designation — Overall service (design) coefficient,Matières
• ISO 12163:199921058,IS,,ISO 12163:1999,Dental baseplate/modelling wax,Cires dentaires à modeler,1999-05-13,1,['11.060.10'],ISO/TC 106/SC 2,9599,,[37635],"['en','fr']",9
• ISO 12164-1:200133040,IS,,ISO 12164-1:2001,Hollow taper interface with flange contact surface — Part 1: Shanks — Dimensions,Interfaces à cône creux-face — Partie 1: Queues — Dimensions,2001-12-20,
• ISO 12164-2:200130047,IS,,ISO 12164-2:2001,Hollow taper interface with flange contact surface — Part 2: Receivers — Dimensions,Interfaces à cône creux-face — Partie 2: Nez de broche — Dimensions,2
• ISO 12164-3:200841999,IS,,ISO 12164-3:2008,Hollow taper interface with flange contact surface — Part 3: Dimensions of shanks for stationary tools,Interfaces à cône creux-face — Partie 3: Dimension
• ISO 12164-3:201460399,IS,,ISO 12164-3:2014,Hollow taper interface with flange contact surface — Part 3: Dimensions of shanks for stationary tools,Interfaces à cône creux-face — Partie 3: Dimension
• ISO 12164-4:200842001,IS,,ISO 12164-4:2008,Hollow taper interface with flange contact surface — Part 4: Dimensions of receivers for stationary tools,Interfaces à cône creux-face — Partie 4: Dimens
• ISO 12164-4:201460400,IS,,ISO 12164-4:2014,Hollow taper interface with flange contact surface — Part 4: Dimensions of receivers for stationary tools,Interfaces à cône creux-face — Partie 4: Dimens
• ISO 12165:200021059,IS,,ISO 12165:2000,Tools for moulding — Components of compression and injection moulds and diecasting dies — Terms and symbols,"Outillage de moulage — Composants des moulages
• ISO 12167-1:200135257,IS,,ISO 12167-1:2001,Plain bearings — Hydrostatic plain journal bearings with drainage grooves under steady-state conditions — Part 1: Calculation of oil-lubricated plain jou
• ISO 12167-1:201670384,IS,,ISO 12167-1:2016,Plain bearings — Hydrostatic plain journal bearings with drainage grooves under steady-state conditions — Part 1: Calculation of oil-lubricated plain jou
• ISO 12167-2:200126869,IS,,ISO 12167-2:2001,Plain bearings — Hydrostatic plain journal bearings with drainage grooves under steady-state conditions — Part 2: Characteristic values for the calculati
• ISO 12168-1:200135258,IS,,ISO 12168-1:2001,Plain bearings — Hydrostatic plain journal bearings without drainage grooves under steady-state conditions — Part 1: Calculation of oil-lubricated plain
• ISO 12168-2:200126870,IS,,ISO 12168-2:2001,Plain bearings — Hydrostatic plain journal bearings without drainage grooves under steady-state conditions — Part 2: Characteristic values for the calcul
• ISO 12171:199821114,IS,,ISO 12171:1998,Space data and information transfer systems — Telecommand — Channel service — Architectural specification,Systèmes de transfert des informations et données
• ISO 12172:199821115,IS,,ISO 12172:1998,Space data and information transfer systems — Telecommand — Data routing service,Systèmes de transfert des informations et données spatiales — Télécommande
• ISO 12173:199821116,IS,,ISO 12173:1998,Space data and information transfer systems — Telecommand — Command operation procedures,Systèmes de transfert des informations et données spatiales — Télé
• ISO 12174:199821117,IS,,ISO 12174:1998,Space data and information transfer systems — Telecommand — Data management service — Architectural specification,Systèmes de transfert des informations et
• ISO 12176-1:199821102,IS,,ISO 12176-1:1998,Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 1: Butt fusion,Tubes et raccords en matières plastiques — Apparei
• ISO 12176-1:200640982,IS,,ISO 12176-1:2006,Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 1: Butt fusion,Tubes et raccords en matières plastiques — Apparei
• ISO 12176-1:201256547,IS,,ISO 12176-1:2012,Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 1: Butt fusion,Tubes et raccords en matières plastiques — Apparei
• ISO 12176-2:200021103,IS,,ISO 12176-2:2000,Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 2: Electrofusion,Tubes et raccords en matières plastiques — Appar
• ISO 12176-2:200846114,IS,,ISO 12176-2:2008,Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 2: Electrofusion,Tubes et raccords en matières plastiques — Appar
• ISO 12176-2:2008/Amd 1:202179720,IS,Amd,ISO 12176-2:2008/Amd 1:2021,Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 2: Electrofusion — Amendment 1,Tubes et raccords en
• ISO 12176-3:200127201,IS,,ISO 12176-3:2001,Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 3: Operator's badge,Tubes et raccords en matières plastiques — Ap
• ISO 12176-3:200641791,IS,,ISO 12176-3:2006,Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 3: Operator's badge,Tubes et raccords en matières plastiques — Ap
• ISO 12179:200021119,IS,,ISO 12179:2000,Geometrical Product Specifications (GPS) — Surface texture: Profile method — Calibration of contact (stylus) instruments,Spécification géométrique des prod
• ISO 12179:2000/Cor 1:200339419,IS,Cor,ISO 12179:2000/Cor 1:2003,Geometrical Product Specifications (GPS) — Surface texture: Profile method — Calibration of contact (stylus) instruments — Technical Corrigen
• ISO 12179:202172758,IS,,ISO 12179:2021,Geometrical product specifications (GPS) — Surface texture: Profile method — Calibration of contact (stylus) instruments,Spécification géométrique des prod
• ISO 12183:19953177,IS,,ISO 12183:1995,Controlled-potential coulometric assay of plutonium,Dosage du plutonium par coulométrie à potentiel imposé,1995-04-27,1,['27.120.30'],ISO/TC 85/SC 5,9599,,[
• ISO 12183:200537592,IS,,ISO 12183:2005,Nuclear fuel technology — Controlled-potential coulometric assay of plutonium,Technologie du combustible nucléaire — Dosage du plutonium par coulométrie à
• ISO 12183:201666168,IS,,ISO 12183:2016,Nuclear fuel technology — Controlled-potential coulometric assay of plutonium,Technologie du combustible nucléaire — Dosage du plutonium par coulométrie à
• ISO 12184:19943141,IS,,ISO 12184:1994,"Determination of solubility in nitric acid of plutonium in unirradiated mixed oxide fuel pellets (U,Pu)O2","Détermination de la solubilité dans l'acide nit
• ISO 12185:199621124,IS,,ISO 12185:1996,Crude petroleum and petroleum products — Determination of density — Oscillating U-tube method,Pétroles bruts et produits pétroliers — Détermination de la m
• ISO 12185:1996/Cor 1:200135866,IS,Cor,ISO 12185:1996/Cor 1:2001,Crude petroleum and petroleum products — Determination of density — Oscillating U-tube method — Technical Corrigendum 1,Pétroles bruts et pro
• ISO 12192:200236774,IS,,ISO 12192:2002,Paper and board — Compressive strength — Ring crush method,Papier et carton — Résistance à la compression — Méthode d'écrasement avec anneau,2002-11-13,1,[
• ISO 12193:199418264,IS,,ISO 12193:1994,Animal and vegetable fats and oils — Determination of lead content — Graphite furnace atomic absorption method,Corps gras d'origines animale et végétale —
• ISO 12197:19962680,IS,,ISO 12197:1996,Woodruff keaseat cutters — Dimensions,Fraises pour logement de clavettes-disques — Dimensions,1996-12-12,1,['25.100.20'],ISO/TC 29/SC 9,9599,,[64208],"['en'
• ISO 12199:200033300,IS,,ISO 12199:2000,Alphabetical ordering of multilingual terminological and lexicographical data represented in the Latin alphabet,Mise en ordre alphabétique des données lexi
• ISO 12206:199521203,IS,,ISO 12206:1995,Photography — Methods for the evaluation of the effectiveness of chemical conversion of silver images against oxidation,Photographie — Méthodes d'évaluatio
• ISO 12209-1:20002078,IS,,ISO 12209-1:2000,Gas cylinders — Outlet connections for gas cylinder valves for compressed breathable air — Part 1: Yoke type connections,Bouteilles à gaz — Raccords de so
• ISO 12209-2:200021213,IS,,ISO 12209-2:2000,Gas cylinders — Outlet connections for gas cylinder valves for compressed breathable air — Part 2: Threaded connections,Bouteilles à gaz — Raccords de so
• ISO 12209-3:200021214,IS,,ISO 12209-3:2000,Gas cylinders — Outlet connections for gas cylinder valves for compressed breathable air — Part 3: Adaptor for 230 bar valves,Bouteilles à gaz — Raccords
• ISO 12210-1:19982636,IS,,ISO 12210-1:1998,Cranes — Anchoring devices for in-service and out-of-service conditions — Part 1: General,Appareils de levage à charge suspendue — Dispositifs d'ancrage d
• ISO 12210-4:19982640,IS,,ISO 12210-4:1998,Cranes — Anchoring devices for in-service and out-of-service conditions — Part 4: Jib cranes,Appareils de levage à charge suspendue — Dispositifs d'ancrag
• ISO 12210-4:1998/Cor 1:200034046,IS,Cor,ISO 12210-4:1998/Cor 1:2000,Cranes — Anchoring devices for in-service and out-of-service conditions — Part 4: Jib cranes — Technical Corrigendum 1,Appareils de levage
• ISO 12213-1:19971236,IS,,ISO 12213-1:1997,Natural gas — Calculation of compression factor — Part 1: Introduction and guidelines,Gaz naturel — Calcul du facteur de compression — Partie 1: Introduct
• ISO 12213-2:199724465,IS,,ISO 12213-2:1997,Natural gas — Calculation of compression factor — Part 2: Calculation using molar-composition analysis,Gaz naturel — Calcul du facteur de compression — P
• ISO 12213-3:199724466,IS,,ISO 12213-3:1997,Natural gas — Calculation of compression factor — Part 3: Calculation using physical properties,Gaz naturel — Calcul du facteur de compression — Partie 3
• ISO 12214:200220309,IS,,ISO 12214:2002,Road vehicles — Direction-of-motion stereotypes for automotive hand controls,Véhicules routiers — Stéréotypes de sens d'action sur les commandes manuelles
• ISO 12214:201055066,IS,,ISO 12214:2010,Road vehicles — Direction-of-motion stereotypes for automotive hand controls,Véhicules routiers — Stéréotypes de sens d'action sur les commandes manuelles
• ISO 12215-5:200840210,IS,,ISO 12215-5:2008,"Small craft — Hull construction and scantlings — Part 5: Design pressures for monohulls, design stresses, scantlings determination","Petits navires — Co
• ISO 12215-5:2008/Amd 1:201461193,IS,Amd,ISO 12215-5:2008/Amd 1:2014,"Small craft — Hull construction and scantlings — Part 5: Design pressures for monohulls, design stresses, scantlings determination — Amend
• ISO 12215-9:201255339,IS,,ISO 12215-9:2012,Small craft — Hull construction and scantlings — Part 9: Sailing craft appendages,Petits navires — Construction de coques et échantillonnage — Partie 9:
• ISO 12216:200233661,IS,,ISO 12216:2002,"Small craft — Windows, portlights, hatches, deadlights and doors — Strength and watertightness requirements","Petits navires — Fenêtres, hublots, panneaux
• ISO 12217-1:200233073,IS,,ISO 12217-1:2002,Small craft — Stability and buoyancy assessment and categorization — Part 1: Non-sailing boats of hull length greater than or equal to 6 m,Petits navires
• ISO 12217-1:2002/Amd 1:200946451,IS,Amd,ISO 12217-1:2002/Amd 1:2009,Small craft — Stability and buoyancy assessment and categorization — Part 1: Non-sailing boats of hull length greater than or equal to 6 m
• ISO 12217-1:201355957,IS,,ISO 12217-1:2013,Small craft — Stability and buoyancy assessment and categorization — Part 1: Non-sailing boats of hull length greater than or equal to 6 m,Petits navires
• ISO 12217-1:201568140,IS,,ISO 12217-1:2015,Small craft — Stability and buoyancy assessment and categorization — Part 1: Non-sailing boats of hull length greater than or equal to 6 m,Petits navires
• ISO 12217-2:200223259,IS,,ISO 12217-2:2002,Small craft — Stability and buoyancy assessment and categorization — Part 2: Sailing boats of hull length greater than or equal to 6 m,Petits navires — É
• ISO 12217-2:201355958,IS,,ISO 12217-2:2013,Small craft — Stability and buoyancy assessment and categorization — Part 2: Sailing boats of hull length greater than or equal to 6 m,Petits navires — É
• ISO 12217-2:201568141,IS,,ISO 12217-2:2015,Small craft — Stability and buoyancy assessment and categorization — Part 2: Sailing boats of hull length greater than or equal to 6 m,Petits navires — É
• ISO 12217-3:200228594,IS,,ISO 12217-3:2002,Small craft — Stability and buoyancy assessment and categorization — Part 3: Boats of hull length less than 6 m,Petits navires — Évaluation de la stabili
• ISO 12217-3:2002/Amd 1:200946452,IS,Amd,ISO 12217-3:2002/Amd 1:2009,Small craft — Stability and buoyancy assessment and categorization — Part 3: Boats of hull length less than 6 m — Amendment 1,Petits navire
• ISO 12217-3:201355959,IS,,ISO 12217-3:2013,Small craft — Stability and buoyancy assessment and categorization — Part 3: Boats of hull length less than 6 m,Petits navires — Évaluation et catégorisa
• ISO 12217-3:201568142,IS,,ISO 12217-3:2015,Small craft — Stability and buoyancy assessment and categorization — Part 3: Boats of hull length less than 6 m,Petits navires — Évaluation et catégorisa
• ISO 12219-1:201250019,IS,,ISO 12219-1:2012,Interior air of road vehicles — Part 1: Whole vehicle test chamber — Specification and method for the determination of volatile organic compounds in cabi
• ISO 12222:19963103,IS,,ISO 12222:1996,"Cinematography — Manufacturer-printed, latent image identification on 16 mm, 35 mm and 65 mm motion-picture film — Specifications and dimensions","Cinémato
• ISO 12222:199829930,IS,,ISO 12222:1998,"Cinematography — Manufacturer-printed, latent image identification on 16 mm, 35 mm and 65 mm motion-picture film — Specifications and dimensions","Cinémat
• ISO 12222:200032994,IS,,ISO 12222:2000,"Cinematography — Manufacturer-printed, latent image identification on 16 mm, 35 mm and 65 mm motion-picture film — Specifications and dimensions","Cinémat
• ISO 12222:2000/Cor 1:200439887,IS,Cor,ISO 12222:2000/Cor 1:2004,"Cinematography — Manufacturer-printed, latent image identification on 16 mm, 35 mm and 65 mm motion-picture film — Specifications and dimens
• ISO 12224-1:199721280,IS,,ISO 12224-1:1997,"Solder wire, solid and flux cored — Specification and test methods — Part 1: Classification and performance requirements","Fils d'apport de brasage, ple
• ISO 12224-2:199721281,IS,,ISO 12224-2:1997,Flux cored solder wire — Specification and test methods — Part 2: Determination of flux content,"Fils d'apport de brasage, pleins et à flux incorporé — S
• ISO 12228:199921319,IS,,ISO 12228:1999,Animal and vegetable fats and oils — Determination of individual and total sterols contents — Gas chromatographic method,Corps gras d'origines animale et v
• ISO 12230:199621321,IS,,ISO 12230:1996,Polybutene (PB) pipes — Effect of time and temperature on the expected strength,Tubes en polybutène (PB) — Influence du temps et de la température sur la r
• ISO 12231-1:202077079,IS,,ISO 12231-1:2020,Photography — Electronic still picture imaging terminology — Part 1: Supplemental vocabulary,Photographie — Terminologie des prises de vue électroniques
• ISO 12231:199721019,IS,,ISO 12231:1997,Photography — Electronic still-picture cameras — Terminology,Photographie — Caméras de prises de vue électroniques — Terminologie,1997-06-12,1,"['37.040.10
• ISO 12231:200536062,IS,,ISO 12231:2005,Photography — Electronic still picture imaging — Vocabulary,Photographie — Prises de vue électroniques — Vocabulaire,2005-02-03,2,"['37.040.10','01.040.37'
• ISO 12231:201253614,IS,,ISO 12231:2012,Photography — Electronic still picture imaging — Vocabulary,Photographie — Prises de vue électroniques — Vocabulaire,2012-01-23,3,"['37.040.10','01.040.37'
• ISO 12232:199821020,IS,,ISO 12232:1998,Photography — Electronic still-picture cameras — Determination of ISO speed,Photographie — Appareils de prises de vue électroniques — Détermination de la s
• ISO 12232:200637777,IS,,ISO 12232:2006,"Photography — Digital still cameras — Determination of exposure index, ISO speed ratings, standard output sensitivity, and recommended exposure index","Ph
• ISO 12233:200033715,IS,,ISO 12233:2000,Photography — Electronic still-picture cameras — Resolution measurements,Photographie — Appareils de prises de vue électroniques — Mesurages de la résoluti
• ISO 12233:201459419,IS,,ISO 12233:2014,Photography — Electronic still picture imaging — Resolution and spatial frequency responses,Photographie — Imagerie des prises de vues électroniques — Réso
• ISO 12233:201771696,IS,,ISO 12233:2017,Photography — Electronic still picture imaging — Resolution and spatial frequency responses,Photographie — Imagerie des prises de vues électroniques — Réso
• ISO 12233:202379169,IS,,ISO 12233:2023,Photography — Electronic still picture imaging — Resolution and spatial frequency responses,Photographie — Imagerie des prises de vues électroniques — Réso
• ISO 12234-1:200129376,IS,,ISO 12234-1:2001,Electronic still-picture imaging - Removable memory — Part 1: Basic removable-memory module,Imagerie de prises de vue électroniques — Mémoire mobile — P
• ISO 12234-1:200742294,IS,,ISO 12234-1:2007,Electronic still-picture imaging — Removable memory — Part 1: Basic removable-memory model,Imagerie de prises de vue électroniques — Mémoire mobile — Par
• ISO 12234-1:201253651,IS,,ISO 12234-1:2012,Electronic still-picture imaging — Removable memory — Part 1: Basic removable-memory model,Imagerie de prises de vue électroniques — Mémoire amovible — P
• ISO 12236:199621332,IS,,ISO 12236:1996,Geotextiles and geotextile-related products — Static puncture test (CBR test),Géotextiles et produits apparentés — Essai de poinçonnement statique (essai C
• ISO 12236:200640762,IS,,ISO 12236:2006,Geosynthetics — Static puncture test (CBR test),Géosynthétiques — Essai de poinçonnement statique (essai CBR),2006-08-25,2,['59.080.70'],ISO/TC 221,9599,[2
• ISO 12238:200120887,IS,,ISO 12238:2001,Pneumatic fluid power — Directional control valves — Measurement of shifting time,Transmissions pneumatiques — Distributeurs de commande directionnels — Me
• ISO 12239:200336866,IS,,ISO 12239:2003,Fire detection and fire alarm systems — Smoke alarms,Systèmes de détection d'incendie et d'alarme — Détecteurs de fumée,2003-12-11,1,['13.220.20'],ISO/TC 2
• ISO 12239:201055265,IS,,ISO 12239:2010,"Smoke alarms using scattered light, transmitted light or ionization","Détecteurs de fumée à lumière dispersée, lumière transmise ou ionisation",2010-12-14
• ISO 12241:199821345,IS,,ISO 12241:1998,Thermal insulation for building equipment and industrial installations — Calculation rules,Isolation thermique des équipements du bâtiment et des installat
• ISO 12241:200841703,IS,,ISO 12241:2008,Thermal insulation for building equipment and industrial installations — Calculation rules,Isolation thermique des équipements de bâtiments et des installa
• ISO 12244:199720925,IS,,ISO 12244:1997,"Rubber, vulcanized or thermoplastic — Determination of elongation, creep and tension set at constant load","Caoutchouc vulcanisé ou thermoplastique — Déte
• ISO 12251:201151294,IS,,ISO 12251:2011,Diesel engines — Clamp mounted CR fuel injectors — Mounting dimensions,Moteurs diesels — Injecteurs de combustible pour rampe commune fixés par patte — Dim
• ISO 12251:201770132,IS,,ISO 12251:2017,Diesel engines — Clamp mounted CR fuel injectors — Mounting dimensions,Moteurs diesels — Injecteurs de combustible pour rampe commune fixée par patte — Dim
• ISO 12260:19961828,IS,,ISO 12260:1996,"Aerospace — Screws, pan head, internal offset cruciform ribbed or unribbed drive, stepped shank, short or medium length MJ threads, metallic material, coat
• ISO 12261:19961900,IS,,ISO 12261:1996,"Aerospace — Screws, pan head, internal offset cruciform ribbed or unribbed drive, pitch diameter shank, long length MJ threads, metallic material, coated o
• ISO 12261:201666322,IS,,ISO 12261:2016,"Aerospace — Screws, pan head, internal offset cruciform ribbed or unribbed drive, pitch diameter shank, long length MJ threads, metallic material, coated
• ISO 12273:19971837,IS,,ISO 12273:1997,"Aerospace — Nuts, anchor, self-locking, floating, self-aligning, two lug, with MJ threads, classifications: 900 MPa (at ambient temperature)/235 degrees C,
• ISO 12289:200336989,IS,,ISO 12289:2003,"Aerospace — Rivets, solid, in corrosion-resisting steel — Procurement specification","Aéronautique et espace — Rivets ordinaires, en acier résistant à la
• ISO 12297:201251323,IS,,ISO 12297:2012,Rolling bearings — Steel cylindrical rollers — Dimensions and tolerances,Roulements — Rouleaux cylindriques en acier — Dimensions et tolérances,2012-03-15,
• ISO 12301:199215367,IS,,ISO 12301:1992,Plain bearings — Quality control techniques and inspection of geometrical and material quality characteristics,Paliers lisses — Techniques de contrôle de l
• ISO 12301:1992/Cor 1:199525064,IS,Cor,ISO 12301:1992/Cor 1:1995,Plain bearings — Quality control techniques and inspection of geometrical and material quality characteristics — Technical Corrigendum 1,Pali
• ISO 12302:199315368,IS,,ISO 12302:1993,Plain bearings — Quality characteristics — Statistical process control (SPC),Paliers lisses — Caractéristiques de qualité — Contrôle statistique du procédé
• ISO 12306:199417783,IS,,ISO 12306:1994,Plain bearings — Measurement of wall thickness of thin-walled half-bearings and thin-walled bushes,Paliers lisses — Mesurage de l'épaisseur de paroi des de
• ISO 12307-1:199415403,IS,,ISO 12307-1:1994,Plain bearings — Wrapped bushes — Part 1: Checking the outside diameter,Paliers lisses — Bagues roulées — Partie 1: Contrôle du diamètre extérieur,1994-1
• ISO 12307-2:200022284,IS,,ISO 12307-2:2000,Plain bearings — Checking of wrapped bushes — Part 2: Checking the inside diameter,Paliers lisses — Contrôle des bagues roulées — Partie 2: Contrôle du d
• ISO 12308:199421090,IS,,ISO 12308:1994,"Plain bearings — Quality assurance — Sample types — Definitions, applications and testing","Paliers lisses — Assurance de la qualité — Types d'échantillon
• ISO 12311:201351350,IS,,ISO 12311:2013,Personal protective equipment — Test methods for sunglasses and related eyewear,Équipement de protection individuelle — Méthodes d'essai pour lunettes de s
• ISO 12312-1:201351351,IS,,ISO 12312-1:2013,Eye and face protection — Sunglasses and related eyewear — Part 1: Sunglasses for general use,Protection des yeux et du visage — Lunettes de soleil et ar
• ISO 12312-1:2013/Amd 1:201567151,IS,Amd,ISO 12312-1:2013/Amd 1:2015,Eye and face protection — Sunglasses and related eyewear — Part 1: Sunglasses for general use — Amendment 1,Protection des yeux et du visag
• ISO 12333:200032253,IS,,ISO 12333:2000,Aerospace — Constant displacement hydraulic motors — General specifications for 35 000 kPa systems,Aéronautique et espace — Moteurs hydrauliques à cylindré
• ISO 12334:20001999,IS,,ISO 12334:2000,"Aerospace — Hydraulic, pressure-compensated, variable delivery pumps — General requirement for 35 000 kPa systems",Aéronautique et espace — Pompes hydrauli
• ISO 12344:201051391,IS,,ISO 12344:2010,Thermal insulating products for building applications — Determination of bending behaviour,Produits isolants thermiques destinés aux applications du bâtime
• ISO 12345:200235484,IS,,ISO 12345:2002,Diesel engines — Cleanliness assessment of fuel injection equipment,Moteurs diesels — Évaluation de la propreté de l'équipement d'injection,2002-11-19,1,['
• ISO 12345:201352966,IS,,ISO 12345:2013,Diesel engines — Cleanliness assessment of fuel injection equipment,Moteurs diesels — Évaluation de propreté pour équipement d'injection de combustible,201
• ISO 12353-1:200234353,IS,,ISO 12353-1:2002,Road vehicles — Traffic accident analysis — Part 1: Vocabulary,Véhicules routiers — Analyse des accidents de la circulation — Partie 1: Vocabulaire,2002-
• ISO 12401:200435358,IS,,ISO 12401:2004,Small craft — Deck safety harness and safety line for use on recreational craft — Safety requirements and test methods,Petits navires — Harnais de sécurité
• ISO 12402-1:200541378,IS,,ISO 12402-1:2005,Personal flotation devices — Part 1: Lifejackets for seagoing ships — Safety requirements,Équipements individuels de flottabilité — Partie 1: Gilets de s
• ISO 12402-2:200641379,IS,,ISO 12402-2:2006,"Personal flotation devices — Part 2: Lifejackets, performance level 275 — Safety requirements","Équipements individuels de flottabilité — Partie 2: Gile
• ISO 12402-2:2006/Amd 1:201051023,IS,Amd,ISO 12402-2:2006/Amd 1:2010,"Personal flotation devices — Part 2: Lifejackets, performance level 275 — Safety requirements — Amendment 1","Équipements individuels de f
• ISO 12402-3:200641380,IS,,ISO 12402-3:2006,"Personal flotation devices — Part 3: Lifejackets, performance level 150 — Safety requirements","Équipements individuels de flottabilité — Partie 3: Gile
• ISO 12402-3:2006/Amd 1:201051215,IS,Amd,ISO 12402-3:2006/Amd 1:2010,"Personal flotation devices — Part 3: Lifejackets, performance level 150 — Safety requirements — Amendment 1","Équipements individuels de f
• ISO 12402-4:200641381,IS,,ISO 12402-4:2006,"Personal flotation devices — Part 4: Lifejackets, performance level 100 — Safety requirements","Équipements individuels de flottabilité — Partie 4: Gil
• ISO 12402-4:2006/Amd 1:201051216,IS,Amd,ISO 12402-4:2006/Amd 1:2010,"Personal flotation devices — Part 4: Lifejackets, performance level 100 — Safety requirements — Amendment 1","Équipements individuels de
• ISO 12402-5:200641382,IS,,ISO 12402-5:2006,Personal flotation devices — Part 5: Buoyancy aids (level 50) — Safety requirements,Équipements individuels de flottabilité — Partie 5: Aides à la flotta
• ISO 12402-5:2006/Amd 1:201051217,IS,Amd,ISO 12402-5:2006/Amd 1:2010,Personal flotation devices — Part 5: Buoyancy aids (level 50) — Safety requirements — Amendment 1,Équipements individuels de flottabilité —
• ISO 12402-5:2006/Cor 1:200645338,IS,Cor,ISO 12402-5:2006/Cor 1:2006,Personal flotation devices — Part 5: Buoyancy aids (level 50) — Safety requirements — Technical Corrigendum 1,Équipements individuels de fl
• ISO 12402-6:200640776,IS,,ISO 12402-6:2006,Personal flotation devices — Part 6: Special purpose lifejackets and buoyancy aids — Safety requirements and additional test methods,Équipements individu
• ISO 12402-6:2006/Amd 1:201051218,IS,Amd,ISO 12402-6:2006/Amd 1:2010,Personal flotation devices — Part 6: Special purpose lifejackets and buoyancy aids — Safety requirements and additional test methods — Amen
• ISO 12402-7:200640716,IS,,ISO 12402-7:2006,Personal flotation devices — Part 7: Materials and components — Safety requirements and test methods,Équipements individuels de flottabilité — Partie 7:
• ISO 12402-7:2006/Amd 1:201151219,IS,Amd,ISO 12402-7:2006/Amd 1:2011,Personal flotation devices — Part 7: Materials and components — Safety requirements and test methods — Amendment 1,Équipements individuels
• ISO 12402-8:200641383,IS,,ISO 12402-8:2006,Personal flotation devices — Part 8: Accessories — Safety requirements and test methods,Équipements individuels de flottabilité — Partie 8: Accessoires
• ISO 12402-8:2006/Amd 1:201151220,IS,Amd,ISO 12402-8:2006/Amd 1:2011,Personal flotation devices — Part 8: Accessories — Safety requirements and test methods — Amendment 1,Équipements individuels de flottabil
• ISO 12402-9:200641987,IS,,ISO 12402-9:2006,Personal flotation devices — Part 9: Test methods,Équipements individuels de flottabilité — Partie 9: Méthodes d'essai,2006-08-24,1,['13.340.70'],ISO/TC
• ISO 12402-9:2006/Amd 1:201151221,IS,Amd,ISO 12402-9:2006/Amd 1:2011,Personal flotation devices — Part 9: Test methods — Amendment 1,Équipements individuels de flottabilité — Partie 9: Méthodes d'essai — Amen
• ISO 12402-10:200640773,IS,,ISO 12402-10:2006,Personal flotation devices — Part 10: Selection and application of personal flotation devices and other relevant devices,Équipements individuels de flot
• ISO 12404:201151407,IS,,ISO 12404:2011,Soil quality — Guidance on the selection and application of screening methods,Qualité du sol — Lignes directrices pour la sélection et l'application des mé
• ISO 12405-1:201151414,IS,,ISO 12405-1:2011,Electrically propelled road vehicles — Test specification for lithium-ion traction battery packs and systems — Part 1: High-power applications,Véhicules
• ISO 12405-2:201255854,IS,,ISO 12405-2:2012,Electrically propelled road vehicles — Test specification for lithium-ion traction battery packs and systems — Part 2: High-energy applications,Véhicules
• ISO 12405-3:201459224,IS,,ISO 12405-3:2014,Electrically propelled road vehicles — Test specification for lithium-ion traction battery packs and systems — Part 3: Safety performance requirements,Vé
• ISO 12417-1:201557697,IS,,ISO 12417-1:2015,Cardiovascular implants and extracorporeal systems — Vascular device-drug combination products — Part 1: General requirements,Implants cardiovasculaires
• ISO 12439:201050309,IS,,ISO 12439:2010,Mixing water for concrete,Eau de gâchage pour béton,2010-01-19,1,['91.100.30'],ISO/TC 71/SC 3,9599,,[83066],['en'],14
• ISO 12460-2:201864064,IS,,ISO 12460-2:2018,Wood-based panels — Determination of formaldehyde release — Part 2: Small-scale chamber method,Panneaux à base de bois — Détermination du dégagement de f
• ISO 12460-3:200842255,IS,,ISO 12460-3:2008,Wood-based panels — Determination of formaldehyde release — Part 3: Gas analysis method,Panneaux à base de bois — Détermination du dégagement de formaldé
• ISO 12460-3:201563065,IS,,ISO 12460-3:2015,Wood-based panels — Determination of formaldehyde release — Part 3: Gas analysis method,Panneaux à base de bois — Détermination du dégagement de formaldé
• ISO 12460-3:202075055,IS,,ISO 12460-3:2020,Wood-based panels — Determination of formaldehyde release — Part 3: Gas analysis method,Panneaux à base de bois — Détermination du dégagement de formaldé
• ISO 12460-4:200842256,IS,,ISO 12460-4:2008,Wood-based panels — Determination of formaldehyde release — Part 4: Desiccator method,Panneaux à base de bois — Détermination du dégagement de formaldéhy
• ISO 12460-4:2008/Amd 1:201157878,IS,Amd,ISO 12460-4:2008/Amd 1:2011,Wood-based panels — Determination of formaldehyde release — Part 4: Desiccator method — Amendment 1,Panneaux à base de bois — Détermination
• ISO 12460-5:201151349,IS,,ISO 12460-5:2011,Wood-based panels — Determination of formaldehyde release — Part 5: Extraction method (called the perforator method),Panneaux à base de bois — Déterminat
• ISO 12466-1:19992486,IS,,ISO 12466-1:1999,Plywood — Bonding quality — Part 1: Test methods,Contreplaqué — Qualité du collage — Partie 1: Méthodes d'essai,1999-10-21,1,['79.060.10'],ISO/TC 89/SC 3,
• ISO 12466-2:199923241,IS,,ISO 12466-2:1999,Plywood — Bonding quality — Part 2: Requirements,Contreplaqué — Qualité du collage — Partie 2: Exigences,1999-10-14,1,['79.060.10'],ISO/TC 89/SC 3,9599,,
• ISO 12468-1:200335093,IS,,ISO 12468-1:2003,External exposure of roofs to fire — Part 1: Test method,Exposition des toitures à un feu extérieur — Partie 1: Méthode d'essais,2003-03-19,1,"['91.060.2
• ISO 12468-2:200535094,IS,,ISO 12468-2:2005,External fire exposure to roofs — Part 2: Classification of roofs,Exposition des toitures à un feu extérieur — Partie 2: Classification des toitures,2005
• ISO 12473:200639861,IS,,ISO 12473:2006,General principles of cathodic protection in sea water,Principes généraux de la protection cathodique en eau de mer,2006-03-29,1,['77.060'],ISO/TC 156,9599
• ISO 12480-1:19972534,IS,,ISO 12480-1:1997,Cranes — Safe use — Part 1: General,Appareils de levage à charge suspendue — Sécurité d'emploi — Partie 1: Généralités,1997-03-06,1,['53.020.20'],ISO/TC 9
• ISO 12480-3:200534029,IS,,ISO 12480-3:2005,Cranes — Safe use — Part 3: Tower cranes,Appareils de levage à charge suspendue — Sécurité d'emploi — Partie 3: Grues à tour,2005-04-13,1,['53.020.20'],I
• ISO 12480-3:201670316,IS,,ISO 12480-3:2016,Cranes — Safe use — Part 3: Tower cranes,Appareils de levage à charge suspendue — Sécurité d'emploi — Partie 3: Grues à tour,2016-08-10,2,['53.020.20'],I
• ISO 12482-1:19952550,IS,,ISO 12482-1:1995,Cranes — Condition monitoring — Part 1: General,Appareils de levage à charge suspendue — Surveillance — Partie 1: Généralités,1995-11-16,1,['53.020.20'],I
• ISO 12485:19982664,IS,,ISO 12485:1998,Tower cranes — Stability requirements,Grues à tour — Exigences relatives à la stabilité,1998-10-29,1,['53.020.20'],ISO/TC 96/SC 7,9599,,"[66765,62531]","['e
• ISO 12488-1:200534547,IS,,ISO 12488-1:2005,Cranes — Tolerances for wheels and travel and traversing tracks — Part 1: General,Appareils de levage à charge suspendue — Tolérances des roues et des vo
• ISO 12488-1:2005/Cor 1:200852476,IS,Cor,ISO 12488-1:2005/Cor 1:2008,Cranes — Tolerances for wheels and travel and traversing tracks — Part 1: General — Technical Corrigendum 1,Appareils de levage à charge su
• ISO 12492:201251473,IS,,ISO 12492:2012,"Rubber, raw — Determination of water content by Karl Fischer method",Caoutchouc brut — Détermination de la teneur en eau par la méthode de Karl Fischer,20
• ISO 12493:201151474,IS,,ISO 12493:2011,"Rubber, vulcanized — Determination of stress in tension upon heating",Caoutchouc vulcanisé — Détermination de la contrainte en traction lors du chauffage,
• ISO 12493:201772785,IS,,ISO 12493:2017,"Rubber, vulcanized — Determination of stress in tension upon heating",Caoutchouc vulcanisé — Détermination de la contrainte en traction lors du chauffage,
• ISO 12494:200132823,IS,,ISO 12494:2001,Atmospheric icing of structures,Charges sur les structures dues à la glace,2001-08-30,1,['91.080.01'],ISO/TC 98/SC 3,9599,,[72443],['en'],56
• ISO 12509:19951845,IS,,ISO 12509:1995,"Earth-moving machinery — Lighting, signalling and marking lights, and reflex-reflector devices","Engins de terrassement — Feux d'éclairage, de signalisatio
• ISO 12509:200440330,IS,,ISO 12509:2004,"Earth-moving machinery — Lighting, signalling and marking lights, and reflex-reflector devices","Engins de terrassement — Feux d'éclairage, de signalisati
• ISO 12543-1:19981705,IS,,ISO 12543-1:1998,Glass in building — Laminated glass and laminated safety glass — Part 1: Definitions and description of component parts,Verre dans la construction — Verre
• ISO 12543-1:201146375,IS,,ISO 12543-1:2011,Glass in building — Laminated glass and laminated safety glass — Part 1: Definitions and description of component parts,Verre dans la construction — Verr
• ISO 12543-2:200438329,IS,,ISO 12543-2:2004,Glass in building — Laminated glass and laminated safety glass — Part 2: Laminated safety glass,Verre dans la construction — Verre feuilleté et verre feu
• ISO 12543-2:201146376,IS,,ISO 12543-2:2011,Glass in building — Laminated glass and laminated safety glass — Part 2: Laminated safety glass,Verre dans la construction — Verre feuilleté et verre feu
• ISO 12543-3:199825257,IS,,ISO 12543-3:1998,Glass in building — Laminated glass and laminated safety glass — Part 3: Laminated glass,Verre dans la construction — Verre feuilleté et verre feuilleté
• ISO 12543-3:201146377,IS,,ISO 12543-3:2011,Glass in building — Laminated glass and laminated safety glass — Part 3: Laminated glass,Verre dans la construction — Verre feuilleté et verre feuilleté
• ISO 12543-4:199825258,IS,,ISO 12543-4:1998,Glass in building — Laminated glass and laminated safety glass — Part 4: Test methods for durability,Verre dans la construction — Verre feuilleté et verr
• ISO 12543-4:201146378,IS,,ISO 12543-4:2011,Glass in building — Laminated glass and laminated safety glass — Part 4: Test methods for durability,Verre dans la construction — Verre feuilleté et verr
• ISO 12543-5:199825259,IS,,ISO 12543-5:1998,Glass in building — Laminated glass and laminated safety glass — Part 5: Dimensions and edge finishing,Verre dans la construction — Verre feuilleté et ve
• ISO 12543-5:201146379,IS,,ISO 12543-5:2011,Glass in building — Laminated glass and laminated safety glass — Part 5: Dimensions and edge finishing,Verre dans la construction — Verre feuilleté et ve
• ISO 12543-6:199825265,IS,,ISO 12543-6:1998,Glass in building — Laminated glass and laminated safety glass — Part 6: Appearance,Verre dans la construction — Verre feuilleté et verre feuilleté de sé
• ISO 12543-6:201146380,IS,,ISO 12543-6:2011,Glass in building — Laminated glass and laminated safety glass — Part 6: Appearance,Verre dans la construction — Verre feuilleté et verre feuilleté de sé
• ISO 12543-6:2011/Cor 1:201261531,IS,Cor,ISO 12543-6:2011/Cor 1:2012,Glass in building — Laminated glass and laminated safety glass — Part 6: Appearance — Technical Corrigendum 1,Verre dans la construction —
• ISO 12567-1:20002533,IS,,ISO 12567-1:2000,Thermal performance of windows and doors — Determination of thermal transmittance by hot box method — Part 1: Complete windows and doors,Isolation thermiq
• ISO 12569:200033382,IS,,ISO 12569:2000,Thermal performance of buildings — Determination of air change in buildings — Tracer gas dilution method,Performances thermiques des bâtiments — Déterminat
• ISO 12569:201256470,IS,,ISO 12569:2012,Thermal performance of buildings and materials — Determination of specific airflow rate in buildings — Tracer gas dilution method,Performance thermique des
• ISO 12571:20002408,IS,,ISO 12571:2000,Hygrothermal performance of building materials and products — Determination of hygroscopic sorption properties,Performance hygrothermique des matériaux et p
• ISO 12571:201361388,IS,,ISO 12571:2013,Hygrothermal performance of building materials and products — Determination of hygroscopic sorption properties,Performance hygrothermique des matériaux et
• ISO 12572:200134000,IS,,ISO 12572:2001,Hygrothermal performance of building materials and products — Determination of water vapour transmission properties,Performance hygrothermique des matériau
• ISO 12578:200840959,IS,,ISO 12578:2008,Timber structures — Glued laminated timber — Component performance and production requirements,Structures en bois — Bois lamellé-collé — Performance des co
• ISO 12609-1:201351550,IS,,ISO 12609-1:2013,Eyewear for protection against intense light sources used on humans and animals for cosmetic and medical applications — Part 1: Specification for product
• ISO 12611:19972483,IS,,ISO 12611:1997,Cinematography — Audio head tones for use in international exchange of 35 mm magnetic film masters — Specifications and location,Cinématographie — 'Audio he
• ISO 12612:19972499,IS,,ISO 12612:1997,Cinematography — Interchange of post-production materials,Cinématographie — Échange de matériaux post-production,1997-06-12,1,['37.060.20'],ISO/TC 36,9599,,
• ISO 12614-1:201457661,IS,,ISO 12614-1:2014,Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 1: General requirements and definitions,Véhicules routiers — Équipements pour v
• ISO 12614-2:201457662,IS,,ISO 12614-2:2014,Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 2: Performance and general test methods,Véhicules routiers — Équipements pour v
• ISO 12614-3:201457663,IS,,ISO 12614-3:2014,Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 3: Check valve,Véhicules routiers — Équipements pour véhicules utilisant le gaz
• ISO 12614-4:201457664,IS,,ISO 12614-4:2014,Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 4: Manual valve,Véhicules routiers — Équipements pour véhicules utilisant le ga
• ISO 12614-5:201457667,IS,,ISO 12614-5:2014,Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 5: Tank pressure gauge,Véhicules routiers — Équipements pour véhicules utilisan
• ISO 12614-6:201457668,IS,,ISO 12614-6:2014,Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 6: Pressure regulator,Véhicules routiers — Équipements pour véhicules utilisant
• ISO 12614-7:201457671,IS,,ISO 12614-7:2014,Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 7: Pressure relief valve,Véhicules routiers — Équipements pour véhicules utilis
• ISO 12614-8:201457673,IS,,ISO 12614-8:2014,Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 8: Excess flow valve,Véhicules routiers — Équipements pour véhicules utilisant
• ISO 12614-9:201457674,IS,,ISO 12614-9:2014,Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 9: Gas-tight housing and ventilation hose,Véhicules routiers — Équipements pour
• ISO 12614-10:201457675,IS,,ISO 12614-10:2014,Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 10: Rigid fuel line in stainless steel,Véhicules routiers — Équipements pour v
• ISO 12614-11:201457678,IS,,ISO 12614-11:2014,Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 11: Fittings,Véhicules routiers — Équipements pour véhicules utilisant le gaz
• ISO 12614-12:201457679,IS,,ISO 12614-12:2014,Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 12: Rigid fuel line in copper and its alloys,Véhicules routiers — Équipements
• ISO 12614-13:201457680,IS,,ISO 12614-13:2014,Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 13: Tank pressure control regulator,Véhicules routiers — Équipements pour véhi
• ISO 12614-14:201457681,IS,,ISO 12614-14:2014,Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 14: Differential pressure fuel content gauge,Véhicules routiers — Équipements
• ISO 12614-15:201457682,IS,,ISO 12614-15:2014,Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 15: Capacitance fuel content gauge,Véhicules routiers — Équipements pour véhic
• ISO 12614-16:201457683,IS,,ISO 12614-16:2014,Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 16: Heat exchanger - vaporizer,Véhicules routiers — Équipements pour véhicules
• ISO 12614-17:201457684,IS,,ISO 12614-17:2014,Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 17: Natural gas detector,Véhicules routiers — Équipements pour véhicules utili
• ISO 12614-18:201457685,IS,,ISO 12614-18:2014,Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 18: Gas temperature sensor,Véhicules routiers — Équipements pour véhicules uti
• ISO 12614-19:201768462,IS,,ISO 12614-19:2017,Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 19: Automatic valve,Véhicules routiers — Composants des systèmes d'alimentatio
• ISO 12616:200235360,IS,,ISO 12616:2002,Translation-oriented terminography,Terminographie axée sur la traduction,2002-03-21,1,['01.120'],ISO/TC 37/SC 2,9599,,"[67160,72308]","['en','fr']",27
• ISO 12620:19992517,IS,,ISO 12620:1999,Computer applications in terminology — Data categories,Aides informatiques en terminologie — Catégories de données,1999-10-21,1,"['35.240.30','01.020']",ISO
• ISO 12620:200937243,IS,,ISO 12620:2009,Terminology and other language and content resources — Specification of data categories and management of a Data Category Registry for language resources,T
• ISO 12620:201969550,IS,,ISO 12620:2019,Management of terminology resources — Data category specifications,Gestion des ressources terminologiques — Spécifications des catégories de données,2019-0
• ISO 12623:201151601,IS,,ISO 12623:2011,Thermal insulating products for building equipment and industrial installations — Determination of short-term water absorption by partial immersion of pref
• ISO 12624:201151602,IS,,ISO 12624:2011,"Thermal insulating products for building equipment and industrial installations — Determination of trace quantities of water soluble chloride, fluoride, s
• ISO 12625-1:200538312,IS,,ISO 12625-1:2005,Tissue paper and tissue products — Part 1: General guidance on terms,Papier tissue et produits tissues — Partie 1: Lignes directrices générales relatives
• ISO 12625-1:201153422,IS,,ISO 12625-1:2011,Tissue paper and tissue products — Part 1: General guidance on terms,Papier tissue et produits tissues — Partie 1: Lignes directrices générales relatives
• ISO 12625-3:200538313,IS,,ISO 12625-3:2005,"Tissue paper and tissue products — Part 3: Determination of thickness, bulking thickness and apparent bulk density","Papier tissue et produits tissues —
• ISO 12625-4:200538314,IS,,ISO 12625-4:2005,"Tissue paper and tissue products — Part 4: Determination of tensile strength, stretch at break and tensile energy absorption","Papier tissue et produits
• ISO 12625-4:201666469,IS,,ISO 12625-4:2016,"Tissue paper and tissue products — Part 4: Determination of tensile strength, stretch at maximum force and tensile energy absorption","Papier tissue et
• ISO 12625-5:200538315,IS,,ISO 12625-5:2005,Tissue paper and tissue products — Part 5: Determination of wet tensile strength,Papier tissue et produits tissues — Partie 5: Détermination de la résist
• ISO 12625-5:201666471,IS,,ISO 12625-5:2016,Tissue paper and tissue products — Part 5: Determination of wet tensile strength,Papier tissue et produits tissue — Partie 5: Détermination de la résista
• ISO 12625-6:200538316,IS,,ISO 12625-6:2005,Tissue paper and tissue products — Part 6: Determination of grammage,Papier tissue et produits tissues — Partie 6: Détermination du grammage,2005-01-04,1
• ISO 12625-7:200738320,IS,,ISO 12625-7:2007,Tissue paper and tissue products — Part 7: Determination of optical properties,Papier tissue et produits tissues — Partie 7: Détermination des propriétés
• ISO 12625-7:201457834,IS,,ISO 12625-7:2014,Tissue paper and tissue products — Part 7: Determination of optical properties — Measurement of brightness and colour with D65/10° (outdoor daylight),Pap
• ISO 12625-8:200640277,IS,,ISO 12625-8:2006,"Tissue paper and tissue products — Part 8: Water-absorption time and water-absorption capacity, basket- immersion test method","Papier tissue et produit
• ISO 12625-9:200538317,IS,,ISO 12625-9:2005,Tissue paper and tissue products — Part 9: Determination of ball burst strength,"Papier tissue et produits tissues — Partie 9: Détermination de la résist
• ISO 12625-11:201257924,IS,,ISO 12625-11:2012,Tissue paper and tissue products — Part 11: Determination of wet ball burst strength,"Papier tissue et produits tissues — Partie 11: Détermination de la
• ISO 12625-12:201045620,IS,,ISO 12625-12:2010,Tissue paper and tissue products — Part 12: Determination of tensile strength of perforated lines — Calculation of perforation efficiency,Papier tissue
• ISO 12625-15:201563393,IS,,ISO 12625-15:2015,Tissue paper and tissue products — Part 15: Determination of optical properties — Measurement of brightness and colour with C/2° (indoor daylight) illum
• ISO 12625-16:201563398,IS,,ISO 12625-16:2015,Tissue paper and tissue products — Part 16: Determination of optical properties — Opacity (paper backing) — Diffuse reflectance method,Papier tissue et
• ISO 12628:201151603,IS,,ISO 12628:2011,"Thermal insulating products for building equipment and industrial installations — Determination of dimensions, squareness and linearity of preformed pipe
• ISO 12629:201151604,IS,,ISO 12629:2011,Thermal insulating products for building equipment and industrial installations — Determination of water vapour transmission properties of preformed pipe i
• ISO 12631:201251613,IS,,ISO 12631:2012,Thermal performance of curtain walling — Calculation of thermal transmittance,Performance thermique des façades-rideaux — Calcul du coefficient de transmis
• ISO 12634:19962153,IS,,ISO 12634:1996,Graphic technology — Determination of tack of paste inks and vehicles by a rotary tackmeter,"Technologie graphique — Détermination de la consistance des enc
• ISO 12635:19962161,IS,,ISO 12635:1996,Graphic technology — Plates for offset printing — Dimensions,Technologie graphique — Plaques pour impression offset — Dimensions,1996-06-20,1,['37.100.10'],
• ISO 12635:200843886,IS,,ISO 12635:2008,Graphic technology — Plates for offset printing — Dimensions,Technologie graphique — Plaques pour impression offset — Dimensions,2008-11-20,2,['37.100.10']
• ISO 12636:199820569,IS,,ISO 12636:1998,Graphic technology — Blankets for offset printing,Technologie graphique — Blanchets pour impression offset,1998-07-09,1,['37.100.10'],ISO/TC 130,9599,,"[60
• ISO 12637-2:199723391,IS,,ISO 12637-2:1997,Graphic technology — Multilingual terminology of printing arts — Part 2: Screen printing terms,Technologie graphique — Terminologie multilingue des arts
• ISO 12637-5:200135503,IS,,ISO 12637-5:2001,Graphic technology — Multilingual terminology of printing arts — Part 5: Screen printing terms,Technologie graphique — Terminologie multilingue des arts
• ISO 12639:19982181,IS,,ISO 12639:1998,Graphic technology — Prepress digital data exchange — Tag image file format for image technology (TIFF/IT),Technologie graphique — Échange de données numéri
• ISO 12640-3:200735110,IS,,ISO 12640-3:2007,Graphic technology — Prepress digital data exchange — Part 3: CIELAB standard colour image data (CIELAB/SCID),Technologie graphique — Échange de données
• ISO 12641-1:201668807,IS,,ISO 12641-1:2016,Graphic technology — Prepress digital data exchange — Colour targets for input scanner calibration — Part 1: Colour targets for input scanner calibration
• ISO 12641:19972079,IS,,ISO 12641:1997,Graphic technology — Prepress digital data exchange — Colour targets for input scanner calibration,Technologie graphique — Échange de données numériques de
• ISO 12642-1:19961611,IS,,ISO 12642-1:1996,Graphic technology — Input data for characterization of 4-colour process printing — Part 1: Initial data set,Technologie graphique — Données d'entrée pour
• ISO 12642-1:1996/Cor 1:200542296,IS,Cor,ISO 12642-1:1996/Cor 1:2005,Graphic technology — Input data for characterization of 4-colour process printing — Part 1: Initial data set — Technical Corrigendum 1,Tech
• ISO 12643-1:200741289,IS,,ISO 12643-1:2007,Graphic technology — Safety requirements for graphic technology equipment and systems — Part 1: General requirements,Technologie graphique — Exigences de
• ISO 12643-1:200951711,IS,,ISO 12643-1:2009,Graphic technology — Safety requirements for graphic technology equipment and systems — Part 1: General requirements,Technologie graphique — Exigences de
• ISO 12643-2:200741290,IS,,ISO 12643-2:2007,Graphic technology — Safety requirements for graphic technology equipment and systems — Part 2: Press equipment and systems,Technologie graphique — Exige
• ISO 12643-2:201053042,IS,,ISO 12643-2:2010,Graphic technology — Safety requirements for graphic technology equipment and systems — Part 2: Prepress and press equipment and systems,Technologie grap
• ISO 12643-3:200841291,IS,,ISO 12643-3:2008,Graphic technology — Safety requirements for graphic technology equipment and systems — Part 3: Binding and finishing equipment and systems,Technologie g
• ISO 12643-3:201053411,IS,,ISO 12643-3:2010,Graphic technology — Safety requirements for graphic technology equipment and systems — Part 3: Binding and finishing equipment and systems,Technologie g
• ISO 12643-4:201051712,IS,,ISO 12643-4:2010,Graphic technology — Safety requirements for graphic technology equipment and systems — Part 4: Converting equipment and systems,Technologie graphique —
• ISO 12643-5:201053694,IS,,ISO 12643-5:2010,Graphic technology — Safety requirements for graphic technology equipment and systems — Part 5: Stand-alone platen presses,Technologie graphique — Exigen
• ISO 12646:200440071,IS,,ISO 12646:2004,Graphic technology — Displays for colour proofing — Characteristics and viewing conditions,Technologie graphique — Affichages pour la réalisation d'épreuve
• ISO 12646:200844468,IS,,ISO 12646:2008,Graphic technology — Displays for colour proofing — Characteristics and viewing conditions,Technologie graphique — Affichages pour la réalisation d'épreuve
• ISO 12646:2008/Amd 1:201053464,IS,Amd,ISO 12646:2008/Amd 1:2010,Graphic technology — Displays for colour proofing — Characteristics and viewing conditions — Amendment 1,Technologie graphique — Affichages p
• ISO 12647-1:19961971,IS,,ISO 12647-1:1996,"Graphic technology — Process control for the manufacture of half-tone colour separations, proof and production prints — Part 1: Parameters and measuremen
• ISO 12647-1:200437801,IS,,ISO 12647-1:2004,"Graphic technology — Process control for the production of half-tone colour separations, proof and production prints — Part 1: Parameters and measuremen
• ISO 12647-2:199623392,IS,,ISO 12647-2:1996,"Graphic technology — Process control for the manufacture of half-tone colour separations, proof and production prints — Part 2: Offset lithographic proc
• ISO 12647-2:200437880,IS,,ISO 12647-2:2004,"Graphic technology — Process control for the production of half-tone colour separations, proof and production prints — Part 2: Offset lithographic proce
• ISO 12647-2:2004/Amd 1:200743977,IS,Amd,ISO 12647-2:2004/Amd 1:2007,"Graphic technology — Process control for the production of half-tone colour separations, proof and production prints — Part 2: Offset lith
• ISO 12647-3:199823393,IS,,ISO 12647-3:1998,"Graphic technology — Process control for the manufacture of half-tone colour separations, proofs and production prints — Part 3: Coldset offset lithogra
• ISO 12647-3:200539480,IS,,ISO 12647-3:2005,"Graphic technology — Process control for the production of half-tone colour separations, proofs and production prints — Part 3: Coldset offset lithograp
• ISO 12647-4:200540022,IS,,ISO 12647-4:2005,"Graphic technology — Process control for the production of half-tone colour separations, proofs and production prints — Part 4: Publication gravure prin
• ISO 12647-5:200125436,IS,,ISO 12647-5:2001,"Graphic technology — Process control for the manufacture of half-tone colour separations, proof and production prints — Part 5: Screen printing","Techn
• ISO 12647-6:200632046,IS,,ISO 12647-6:2006,"Graphic technology — Process control for the production of half-tone colour separations, proofs and production prints — Part 6: Flexographic printing","
• ISO 12647-6:201255037,IS,,ISO 12647-6:2012,"Graphic technology — Process control for the production of half-tone colour separations, proofs and production prints — Part 6: Flexographic printing","
• ISO 12647-6:2012/Amd 1:201568411,IS,Amd,ISO 12647-6:2012/Amd 1:2015,"Graphic technology — Process control for the production of half-tone colour separations, proofs and production prints — Part 6: Flexograph
• ISO 12647-7:200743428,IS,,ISO 12647-7:2007,"Graphic technology — Process control for the production of half-tone colour separations, proof and production prints — Part 7: Proofing processes workin
• ISO 12647-7:201363032,IS,,ISO 12647-7:2013,"Graphic technology — Process control for the production of half-tone colour separations, proof and production prints — Part 7: Proofing processes workin
• ISO 12647-8:201253436,IS,,ISO 12647-8:2012,"Graphic technology — Process control for the production of half-tone colour separations, proof and production prints — Part 8: Validation print processe
• ISO 12648:200331702,IS,,ISO 12648:2003,Graphic technology — Safety requirements for printing press systems,Technologie graphique — Exigences de sécurité pour systèmes de presses d'impression,20
• ISO 12648:200638032,IS,,ISO 12648:2006,Graphic technology — Safety requirements for printing press systems,Technologie graphique — Exigences de sécurité pour systèmes de presses à imprimer,2006-
• ISO 12649:200431703,IS,,ISO 12649:2004,Graphic technology — Safety requirements for binding and finishing systems and equipment,Technologie graphique — Exigences de sécurité pour les systèmes et
• ISO 12651:19991885,IS,,ISO 12651:1999,Electronic imaging — Vocabulary,Imagerie électronique — Vocabulaire,1999-12-09,1,"['01.040.37','37.080']",ISO/TC 171/SC 1,9599,,"[54755,42673,41051]","['en'
• ISO 12671:201251648,IS,,ISO 12671:2012,Thermal spraying - Thermally sprayed coatings - Symbolic representation on drawings,Projection thermique — Revêtements appliqués par projection thermique —
• ISO 12677:200336648,IS,,ISO 12677:2003,Chemical analysis of refractory products by XRF — Fused cast bead method,Analyse chimique des matériaux réfractaires par fluorescence de rayons X — Méthode
• ISO 12696:201253656,IS,,ISO 12696:2012,Cathodic protection of steel in concrete,Protection cathodique de l'acier dans le béton,2012-01-30,1,"['77.060','77.140.15']",ISO/TC 156,9599,[39863],[7113
• ISO 12696:201671133,IS,,ISO 12696:2016,Cathodic protection of steel in concrete,Protection cathodique de l'acier dans le béton,2016-11-29,2,"['77.060','77.140.15']",ISO/TC 156,9599,[53656],[7720
• ISO 12706:20001955,IS,,ISO 12706:2000,Non-destructive testing — Terminology - Terms used in penetrant testing,Essais non destructifs — Terminologie - Termes utilisés en contrôle par ressuage,200
• ISO 12715:19992323,IS,,ISO 12715:1999,Ultrasonic non-destructive testing — Reference blocks and test procedures for the characterization of contact search unit beam profiles,Contrôles non destru
• ISO 12716:200134090,IS,,ISO 12716:2001,Non-destructive testing — Acoustic emission inspection — Vocabulary,Essais non destructifs — Contrôle par émission acoustique — Vocabulaire,2001-06-21,1,"[
• ISO 12718:200843738,IS,,ISO 12718:2008,Non-destructive testing — Eddy current testing — Vocabulary,Essais non destructifs — Contrôle par courants de Foucault — Vocabulaire,2008-08-13,1,"['01.040
• ISO 12725:19971766,IS,,ISO 12725:1997,Nickel and nickel alloy castings,Pièces moulées en nickel et alliages de nickel,1997-07-17,1,['77.150.40'],ISO/TC 155,9599,,[70212],"['en','fr']",7
• ISO 12736:201451655,IS,,ISO 12736:2014,"Petroleum and natural gas industries — Wet thermal insulation coatings for pipelines, flow lines, equipment and subsea structures","Industries du pétrole
• ISO 12737:19961579,IS,,ISO 12737:1996,Metallic materials — Determination of plane-strain fracture toughness,Matériaux métalliques — Détermination du facteur d'intensité de contrainte critique,19
• ISO 12737:200540887,IS,,ISO 12737:2005,Metallic materials — Determination of plane-strain fracture toughness,Matériaux métalliques — Détermination du facteur d'intensité de contrainte critique,2
• ISO 12739:19972661,IS,,ISO 12739:1997,Zinc sulfide concentrates — Determination of zinc content — Ion-exchange/EDTA titrimetric method,Concentrés sulfurés de zinc — Dosage du zinc — Méthode par

← records 13,601–14,000 · All of Withdrawn and superseded ISO standards · records 14,401 on →