Records 14,401–14,800 — Withdrawn and superseded ISO standards

Records 14,401 to 14,800 of 24,640. Each links to its own page, which carries the source URL and the quoted line that states the value.

• ISO 12742:20002649,IS,,ISO 12742:2000,"Copper, lead and zinc sulfide concentrates — Determination of transportable moisture limits — Flow table method","Concentrés sulfurés de cuivre, de plomb e
• ISO 12742:200739285,IS,,ISO 12742:2007,"Copper, lead, and zinc sulfide concentrates — Determination of transportable moisture limits — Flow-table method","Concentrés sulfurés de cuivre, de plomb
• ISO 12743:19982655,IS,,ISO 12743:1998,"Copper, lead and zinc sulfide concentrates — Sampling procedures for determination of metal and moisture content","Concentrés sulfurés de cuivre, de plomb
• ISO 12743:200640697,IS,,ISO 12743:2006,"Copper, lead, zinc and nickel concentrates — Sampling procedures for determination of metal and moisture content","Concentrés de cuivre, de plomb, de zinc
• ISO 12743:201869467,IS,,ISO 12743:2018,"Copper, lead, zinc and nickel concentrates — Sampling procedures for determination of metal and moisture content","Concentrés de cuivre, de plomb, de zinc
• ISO 12744:199722318,IS,,ISO 12744:1997,"Copper, lead and zinc sulfide concentrates — Experimental methods for checking the precision of sampling","Concentrés sulfurés de cuivre, de plomb et de z
• ISO 12744:200641317,IS,,ISO 12744:2006,"Copper, lead, zinc and nickel concentrates — Experimental methods for checking the precision of sampling","Concentrés de cuivre, de plomb, de zinc et de n
• ISO 12745:19962651,IS,,ISO 12745:1996,"Copper, lead and zinc ores and concentrates — Precision and bias of mass measurement techniques","Minerais et concentrés de cuivre, de plomb et de zinc — J
• ISO 12749-2:201359404,IS,,ISO 12749-2:2013,"Nuclear energy, nuclear technologies, and radiological protection — Vocabulary — Part 2: Radiological protection","Énergie nucléaire, technologies nuclé
• ISO 12749-3:201561019,IS,,ISO 12749-3:2015,"Nuclear energy, nuclear technologies, and radiological protection — Vocabulary — Part 3: Nuclear fuel cycle","Énergie nucléaire, technologies nucléaires
• ISO 12749-5:201867429,IS,,ISO 12749-5:2018,"Nuclear energy, nuclear technologies, and radiological protection — Vocabulary — Part 5: Nuclear reactors","Énergie nucléaire, technologies nucléaires,
• ISO 12756:199827200,IS,,ISO 12756:1998,Drawing and writing instruments — Ball point pens and roller ball pens — Vocabulary,Instruments de dessin et d'écriture — Stylos à pointe bille et stylos r
• ISO 12756:1998/Amd 1:201154335,IS,Amd,ISO 12756:1998/Amd 1:2011,Drawing and writing instruments — Ball point pens and roller ball pens — Vocabulary — Amendment 1: Viscosity of the writing fluid,Instruments
• ISO 12757-1:19981129,IS,,ISO 12757-1:1998,Ball point pens and refills — Part 1: General use,Stylos à pointe bille et recharges — Partie 1: Utilisation générale,1998-05-14,1,['97.180'],ISO/TC 10,95
• ISO 12757-1:201669124,IS,,ISO 12757-1:2016,Ball point pens and refills — Part 1: General use,Stylos à pointe bille et recharges — Partie 1: Utilisation générale,2016-11-07,2,['97.180'],ISO/TC 10,9
• ISO 12759:201051665,IS,,ISO 12759:2010,Fans — Efficiency classification for fans,Ventilateurs — Classification du rendement des ventilateurs,2010-12-03,1,['23.120'],ISO/TC 117,9599,,"[67574,6757
• ISO 12759:2010/Amd 1:201362986,IS,Amd,ISO 12759:2010/Amd 1:2013,Fans — Efficiency classification for fans — Amendment 1,Ventilateurs — Classification du rendement des ventilateurs — Amendement 1,2013-03-25
• ISO 12789:200030215,IS,,ISO 12789:2000,Reference neutron radiations — Characteristics and methods of production of simulated workplace neutron fields,Rayonnements neutroniques de référence — Car
• ISO 12790-1:200132473,IS,,ISO 12790-1:2001,Radiation protection — Performance criteria for radiobioassay — Part 1: General principles,Radioprotection — Critères de performance pour l'analyse radio
• ISO 12800:200332142,IS,,ISO 12800:2003,Nuclear fuel technology — Guide to the measurement of the specific surface area of uranium oxide powders by the BET method,Technologie du combustible nuclé
• ISO 12807:19962496,IS,,ISO 12807:1996,Safe transport of radioactive materials — Leakage testing on packages,Sûreté des transports de matières radioactives — Contrôle de l'étanchéité des colis,19
• ISO 12809:201151778,IS,,ISO 12809:2011,Crop protection equipment — Reciprocating positive displacement pumps and centrifugal pumps — Test methods,Matériel de protection des cultures — Pompes vol
• ISO 12813:201564165,IS,,ISO 12813:2015,Electronic fee collection — Compliance check communication for autonomous systems,Perception du télépéage — Communication de contrôle de conformité pour sy
• ISO 12813:2015/Amd 1:201770033,IS,Amd,ISO 12813:2015/Amd 1:2017,Electronic fee collection — Compliance check communication for autonomous systems — Amendment 1,Perception du télépéage — Communication de co
• ISO 12813:201975833,IS,,ISO 12813:2019,Electronic fee collection — Compliance check communication for autonomous systems,Perception de télépéage — Communication de contrôle de conformité pour sy
• ISO 12815:201351805,IS,,ISO 12815:2013,Fibre-reinforced plastic composites — Determination of plain-pin bearing strength,Composites plastiques renforcés de fibres — Détermination de la résistanc
• ISO 12817:201351807,IS,,ISO 12817:2013,Fibre-reinforced plastic composites — Determination of open-hole compression strength,Composites plastiques renforcés de fibres — Détermination de la résis
• ISO 12819:19991917,IS,,ISO 12819:1999,Methods of evaluation of the battery life of a battery-powered watch,Méthodes d'évaluation de l'autonomie de fonctionnement d'une montre à pile,1999-04-29,1
• ISO 12819:1999/Cor 1:199933143,IS,Cor,ISO 12819:1999/Cor 1:1999,Methods of evaluation of the battery life of a battery-powered watch — Technical Corrigendum 1,Méthodes d'évaluation de l'autonomie de foncti
• ISO 12821:201362017,IS,,ISO 12821:2013,Glass packaging — 26 H 180 crown finish — Dimensions,Emballage en verre — Bague couronne 26 H 180 — Dimensions,2013-08-30,1,['55.100'],ISO/TC 63,9599,,[742
• ISO 12822:201562018,IS,,ISO 12822:2015,Glass packaging — 26 H 126 crown finish — Dimensions,Emballages en verre — Bague couronne 26 H 126 — Dimensions,2015-07-24,1,['55.100'],ISO/TC 63,9599,,[74
• ISO 12829:201661624,IS,,ISO 12829:2016,Hydraulic spin-on filters with finite lives — Method for verifying the rated fatigue life and the rated static burst pressure of the pressure-containing en
• ISO 12830:201151848,IS,,ISO 12830:2011,"Paper, board and pulps — Determination of acid-soluble magnesium, calcium, manganese, iron, copper, sodium and potassium","Papiers, cartons et pâtes — Dét
• ISO 12836:201251927,IS,,ISO 12836:2012,Dentistry — Digitizing devices for CAD/CAM systems for indirect dental restorations — Test methods for assessing accuracy,Médecine bucco-dentaire — Disposi
• ISO 12853:19971714,IS,,ISO 12853:1997,Optics and optical instruments — Microscopes — Information provided to the user,Optique et instruments d'optique — Microscopes — Informations délivrées à l'
• ISO 12855:201252018,IS,,ISO 12855:2012,Electronic fee collection — Information exchange between service provision and toll charging,Perception du télépéage — Échange d'informations entre la pres
• ISO 12855:2012/Cor 1:201363682,IS,Cor,ISO 12855:2012/Cor 1:2013,Electronic fee collection — Information exchange between service provision and toll charging — Technical Corrigendum 1,Perception du télépéag
• ISO 12855:201564127,IS,,ISO 12855:2015,Electronic fee collection — Information exchange between service provision and toll charging,Perception du télépéage — Échange d'informations entre la pres
• ISO 12855:202278013,IS,,ISO 12855:2022,Electronic fee collection — Information exchange between service provision and toll charging,Perception de télépéage — Échange d'informations entre la pres
• ISO 12856-1:201452034,IS,,ISO 12856-1:2014,Plastics — Plastic railway sleepers for railway applications (railroad ties) — Part 1: Material characteristics,Plastiques — Traverses en plastique pour
• ISO 12857-1:199723672,IS,,ISO 12857-1:1997,Optics and optical instruments — Geodetic instruments — Field procedures for determining accuracy — Part 1: Levels,Optique et instruments d'optique — Ins
• ISO 12857-2:199723673,IS,,ISO 12857-2:1997,Optics and optical instruments — Geodetic instruments — Field procedures for determining accuracy — Part 2: Theodolites,Optique et instruments d'optique
• ISO 12857-3:199723674,IS,,ISO 12857-3:1997,Optics and optical instruments — Geodetic instruments — Field procedures for determining accuracy — Part 3: Electro-optical distance meters (EDM instrume
• ISO 12858-1:19992038,IS,,ISO 12858-1:1999,Optics and optical instruments — Ancillary devices for geodetic instruments — Part 1: Invar levelling staffs,Optique et instruments d'optique — Equipement
• ISO 12858-2:199928718,IS,,ISO 12858-2:1999,Optics and optical instruments — Ancillary devices for geodetic instruments — Part 2: Tripods,Optique et instruments d'optique — Équipements annexes pour
• ISO 12858-2:1999/Amd 1:201357608,IS,Amd,ISO 12858-2:1999/Amd 1:2013,Optics and optical instruments — Ancillary devices for geodetic instruments — Part 2: Tripods — Amendment 1,Optique et instruments d'optiqu
• ISO 12863:201052074,IS,,ISO 12863:2010,Standard test method for assessing the ignition propensity of cigarettes,Méthode d'essai normalisée pour évaluer le potentiel incendiaire des cigarettes,20
• ISO 12863:2010/Amd 1:201669778,IS,Amd,ISO 12863:2010/Amd 1:2016,Standard test method for assessing the ignition propensity of cigarettes — Amendment 1,Méthode d'essai normalisée pour évaluer le potentiel i
• ISO 12863:2010/Cor 1:201158040,IS,Cor,ISO 12863:2010/Cor 1:2011,Standard test method for assessing the ignition propensity of cigarettes — Technical Corrigendum 1,Méthode d'essai normalisée pour évaluer le
• ISO 12865:19982575,IS,,ISO 12865:1998,Ophthalmic instruments — Retinoscopes,Instruments ophtalmiques — Rétinoscopes,1998-06-11,1,['11.040.70'],ISO/TC 172/SC 7,9599,,[39144],"['en','fr']",10
• ISO 12867:19982591,IS,,ISO 12867:1998,Ophthalmic instruments — Trial frames,Instruments ophtalmiques — Montures d'essai,1998-06-18,1,['11.040.70'],ISO/TC 172/SC 7,9599,,[54969],"['en','fr']",6
• ISO 12870:19972368,IS,,ISO 12870:1997,Ophthalmic optics — Spectacle frames — General requirements and test methods,Optique ophtalmique — Montures de lunettes — Exigences générales et méthodes d'
• ISO 12870:200429884,IS,,ISO 12870:2004,Ophthalmic optics — Spectacle frames — Requirements and test methods,Optique ophtalmique — Montures de lunettes — Exigences et méthodes d'essai,2004-07-30,
• ISO 12870:201251050,IS,,ISO 12870:2012,Ophthalmic optics — Spectacle frames — Requirements and test methods,Optique ophtalmique — Montures de lunettes — Exigences et méthodes d'essai,2012-03-26,
• ISO 12870:201668526,IS,,ISO 12870:2016,Ophthalmic optics — Spectacle frames — Requirements and test methods,Optique ophtalmique — Montures de lunettes — Exigences et méthodes d'essai,2016-10-28,
• ISO 12871:201052081,IS,,ISO 12871:2010,Olive oils and olive-pomace oils — Determination of aliphatic alcohols content by capillary gas chromatography,Huiles d'olive et huiles de grignons d'olive
• ISO 12872:201052082,IS,,ISO 12872:2010,Olive oils and olive-pomace oils — Determination of the 2-glyceryl monopalmitate content,Huiles d'olive et huiles de grignons d'olive — Détermination de la
• ISO 12891-1:199824558,IS,,ISO 12891-1:1998,Retrieval and analysis of surgical implants — Part 1: Retrieval and handling,Retrait et analyse des implants chirurgicaux — Partie 1: Retrait et manipula
• ISO 12891-1:201146113,IS,,ISO 12891-1:2011,Implants for surgery — Retrieval and analysis of surgical implants — Part 1: Retrieval and handling,Implants chirurgicaux — Retrait et analyse des implan
• ISO 12891-2:200024559,IS,,ISO 12891-2:2000,Retrieval and analysis of surgical implants — Part 2: Analysis of retrieved metallic surgical implants,Retrait et analyse des implants chirurgicaux — Par
• ISO 12891-2:201459181,IS,,ISO 12891-2:2014,Retrieval and analysis of surgical implants — Part 2: Analysis of retrieved surgical implants,Retrait et analyse des implants chirurgicaux — Partie 2: An
• ISO 12891-3:200025000,IS,,ISO 12891-3:2000,Retrieval and analysis of surgical implants — Part 3: Analysis of retrieved polymeric surgical implants,Retrait et analyse des implants chirurgicaux — Pa
• ISO 12891-4:200024999,IS,,ISO 12891-4:2000,Retrieval and analysis of surgical implants — Part 4: Analysis of retrieved ceramic surgical implants,Retrait et analyse des implants chirurgicaux — Part
• ISO 12900:19971671,IS,,ISO 12900:1997,Hard coal - Determination of abrasiveness,Houille — Détermination de l'abrasivité,1997-12-25,1,['73.040'],ISO/TC 27/SC 5,9599,,[67725],"['en','fr']",11
• ISO 12900:201567725,IS,,ISO 12900:2015,Hard coal — Determination of abrasiveness,Houille — Détermination de l'abrasivité,2015-06-03,2,['73.040'],ISO/TC 27/SC 5,9599,[1671],[75882],['en'],9
• ISO 12914:201252171,IS,,ISO 12914:2012,Soil quality — Microwave-assisted extraction of the aqua regia soluble fraction for the determination of elements,Qualité du sol — Extraction assistée par
• ISO 12917-1:200235926,IS,,ISO 12917-1:2002,Petroleum and liquid petroleum products — Calibration of horizontal cylindrical tanks — Part 1: Manual methods,Pétrole et produits pétroliers liquides —
• ISO 12917-1:2002/Cor 1:200955191,IS,Cor,ISO 12917-1:2002/Cor 1:2009,Petroleum and liquid petroleum products — Calibration of horizontal cylindrical tanks — Part 1: Manual methods — Technical Corrigendum 1,Pé
• ISO 12922:19992719,IS,,ISO 12922:1999,"Lubricants, industrial oils and related products (class L) — Family H (Hydraulic systems) — Specifications for categories HFAE, HFAS, HFB, HFC, HFDR and HF
• ISO 12922:1999/Cor 1:200135052,IS,Cor,ISO 12922:1999/Cor 1:2001,"Lubricants, industrial oils and related products (class L) — Family H (Hydraulic systems) — Specifications for categories HFAE, HFAS, HFB, H
• ISO 12922:201243284,IS,,ISO 12922:2012,"Lubricants, industrial oils and related products (class L) — Family H (Hydraulic systems) — Specifications for hydraulic fluids in categories HFAE, HFAS,
• ISO 12924:201044301,IS,,ISO 12924:2010,"Lubricants, industrial oils and related products (Class L) — Family X (Greases) — Specification","Lubrifiants, huiles industrielles et produits connexes (
• ISO 12924:2010/Cor 1:201262016,IS,Cor,ISO 12924:2010/Cor 1:2012,"Lubricants, industrial oils and related products (Class L) — Family X (Greases) — Specification — Technical Corrigendum 1","Lubrifiants, hui
• ISO 12925-1:19962744,IS,,ISO 12925-1:1996,"Lubricants, industrial oils and related products (class L) — Family C (Gears) — Part 1: Specifications for lubricants for enclosed gear systems","Lubrifi
• ISO 12925-1:1996/Cor 1:200236490,IS,Cor,ISO 12925-1:1996/Cor 1:2002,"Lubricants, industrial oils and related products (class L) — Family C (Gears) — Part 1: Specifications for lubricants for enclosed gear sy
• ISO 12925-1:201870817,IS,,ISO 12925-1:2018,"Lubricants, industrial oils and related products (class L) — Family C (gears) — Part 1: Specifications for lubricants for enclosed gear systems","Lubrif
• ISO 12925-1:2018/Amd 1:202078524,IS,Amd,ISO 12925-1:2018/Amd 1:2020,"Lubricants, industrial oils and related products (class L) — Family C (gears) — Part 1: Specifications for lubricants for enclosed gear sy
• ISO 12931:201252210,IS,,ISO 12931:2012,Performance criteria for authentication solutions used to combat counterfeiting of material goods,Critères de performance des solutions d'authentification
• ISO 12934:201352219,IS,,ISO 12934:2013,Tractors and machinery for agriculture and forestry — Basic types — Vocabulary,Tracteurs et matériels agricoles et forestiers — Principaux types — Vocabula
• ISO 12944-1:19981214,IS,,ISO 12944-1:1998,Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 1: General introduction,Peintures et vernis — Anticorro
• ISO 12944-2:199822404,IS,,ISO 12944-2:1998,Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 2: Classification of environments,Peintures et vernis
• ISO 12944-3:199822405,IS,,ISO 12944-3:1998,Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 3: Design considerations,Peintures et vernis — Anticor
• ISO 12944-4:199822406,IS,,ISO 12944-4:1998,Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 4: Types of surface and surface preparation,Peintures
• ISO 12944-5:199822407,IS,,ISO 12944-5:1998,Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 5: Protective paint systems,Peintures et vernis — Anti
• ISO 12944-5:200741862,IS,,ISO 12944-5:2007,Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 5: Protective paint systems,Peintures et vernis — Anti
• ISO 12944-5:201857319,IS,,ISO 12944-5:2018,Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 5: Protective paint systems,Peintures et vernis — Anti
• ISO 12944-6:199822408,IS,,ISO 12944-6:1998,Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 6: Laboratory performance test methods,Peintures et ve
• ISO 12944-7:199822409,IS,,ISO 12944-7:1998,Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 7: Execution and supervision of paint work,Peintures e
• ISO 12944-8:199822410,IS,,ISO 12944-8:1998,Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 8: Development of specifications for new work and main
• ISO 12945-1:200033509,IS,,ISO 12945-1:2000,Textiles — Determination of fabric propensity to surface fuzzing and to pilling — Part 1: Pilling box method,Textiles — Détermination de la propension de
• ISO 12945-2:200022776,IS,,ISO 12945-2:2000,Textiles — Determination of fabric propensity to surface fuzzing and to pilling — Part 2: Modified Martindale method,Textiles — Détermination de la prope
• ISO 12945-3:201455060,IS,,ISO 12945-3:2014,"Textiles- Determination of the fabric propensity to surface pilling, fuzzing or matting — Part 3: Random tumble pilling method",Textiles - Détermination
• ISO 12947-2:199823619,IS,,ISO 12947-2:1998,Textiles — Determination of the abrasion resistance of fabrics by the Martindale method — Part 2: Determination of specimen breakdown,Textiles — Détermin
• ISO 12947-2:1998/Cor 1:200237373,IS,Cor,ISO 12947-2:1998/Cor 1:2002,Textiles — Determination of the abrasion resistance of fabrics by the Martindale method — Part 2: Determination of specimen breakdown — Tec
• ISO 12951:19991242,IS,,ISO 12951:1999,Textile floor coverings — Determination of mass loss using the Lisson test,Revêtements de sol textiles — Détermination de la perte de masse à l'aide de la m
• ISO 12951:201561665,IS,,ISO 12951:2015,"Textile floor coverings — Determination of mass loss, fibre bind and stair nosing appearance change using the Lisson Tretrad machine","Revêtements de sol
• ISO 12952-1:19981557,IS,,ISO 12952-1:1998,Textiles — Burning behaviour of bedding items — Part 1: General test methods for the ignitability by a smouldering cigarette,Textiles — Comportement au fe
• ISO 12952-2:199822779,IS,,ISO 12952-2:1998,Textiles — Burning behaviour of bedding items — Part 2: Specific test methods for the ignitability by a smouldering cigarette,Textiles — Comportement au
• ISO 12952-3:199822780,IS,,ISO 12952-3:1998,Textiles — Burning behaviour of bedding items — Part 3: General test methods fot the ignitability by a small open flame,Textiles — Comportement au feu de
• ISO 12952-4:199822781,IS,,ISO 12952-4:1998,Textiles — Burning behaviour of bedding items — Part 4: Specific test methods for the ignitability by a small open flame,Textiles — Comportement au feu d
• ISO 12956:19991503,IS,,ISO 12956:1999,Geotextiles and geotextile-related products — Determination of the characteristic opening size,Géotextiles et produits apparentés — Détermination de l'ouver
• ISO 12956:201054544,IS,,ISO 12956:2010,Geotextiles and geotextile-related products — Determination of the characteristic opening size,Géotextiles et produits apparentés — Détermination de l'ouve
• ISO 12957-1:200536939,IS,,ISO 12957-1:2005,Geosynthetics — Determination of friction characteristics — Part 1: Direct shear test,Géosynthétiques — Détermination des caractéristiques de frottement
• ISO 12957-2:200537997,IS,,ISO 12957-2:2005,Geosynthetics — Determination of friction characteristics — Part 2: Inclined plane test,Géosynthétiques — Détermination des caractéristiques de frottemen
• ISO 12958:19991125,IS,,ISO 12958:1999,Geotextiles and geotextile-related products — Determination of water flow capacity in their plane,Géotextiles et produits apparentés — Détermination de la c
• ISO 12958:201054546,IS,,ISO 12958:2010,Geotextiles and geotextile-related products — Determination of water flow capacity in their plane,Géotextiles et produits apparentés — Détermination de la
• ISO 12966-2:201143172,IS,,ISO 12966-2:2011,Animal and vegetable fats and oils — Gas chromatography of fatty acid methyl esters — Part 2: Preparation of methyl esters of fatty acids,Corps gras d'or
• ISO 12966-3:200952289,IS,,ISO 12966-3:2009,Animal and vegetable fats and oils — Gas chromatography of fatty acid methyl esters — Part 3: Preparation of methyl esters using trimethylsulfonium hydro
• ISO 12966-4:201563503,IS,,ISO 12966-4:2015,Animal and vegetable fats and oils — Gas chromatography of fatty acid methyl esters — Part 4: Determination by capillary gas chromatography,Corps gras d'
• ISO 12967-1:200950500,IS,,ISO 12967-1:2009,Health informatics — Service architecture — Part 1: Enterprise viewpoint,Informatique de santé — Architecture de service — Partie 1: Point de vue d'entre
• ISO 12967-2:200951121,IS,,ISO 12967-2:2009,Health informatics — Service architecture — Part 2: Information viewpoint,Informatique de santé — Architecture de service — Partie 2: Point de vue d'info
• ISO 12967-3:200951122,IS,,ISO 12967-3:2009,Health informatics — Service architecture — Part 3: Computational viewpoint,Informatique de santé — Architecture de service — Partie 3: Point de vue info
• ISO 12984:200033096,IS,,ISO 12984:2000,Carbonaceous materials used in the production of aluminium — Calcined coke — Determination of particle size distribution,Produits carbonés utilisés pour la
• ISO 12985-1:200033198,IS,,ISO 12985-1:2000,Carbonaceous materials used in the production of aluminium — Baked anodes and cathode blocks — Part 1: Determination of apparent density using a dimensio
• ISO 12985-2:200033199,IS,,ISO 12985-2:2000,Carbonaceous materials used in the production of aluminium — Baked anodes and cathode blocks — Part 2: Determination of apparent density and of open poro
• ISO 12986-1:20001996,IS,,ISO 12986-1:2000,Carbonaceous materials used in the production of aluminium — Prebaked anodes and cathode blocks — Part 1: Determination of bending/shear strength by a thr
• ISO 12986-2:200529857,IS,,ISO 12986-2:2005,Carbonaceous materials used in the production of aluminium — Prebaked anodes and cathode blocks — Part 2: Determination of flexural strength by the four-
• ISO 12986-2:200952318,IS,,ISO 12986-2:2009,Carbonaceous materials used in the production of aluminium — Prebaked anodes and cathode blocks — Part 2: Determination of flexural strength by the four-
• ISO 12992:19951853,IS,,ISO 12992:1995,Plastics — Vertical flame spread determination for film and sheet,Plastiques — Détermination de la propagation verticale de la flamme sur films et feuilles,
• ISO 12999-1:201436492,IS,,ISO 12999-1:2014,Acoustics — Determination and application of measurement uncertainties in building acoustics — Part 1: Sound insulation,Acoustique — Détermination et app
• ISO 13000-1:199720476,IS,,ISO 13000-1:1997,Plastics — Polytetrafluoroethylene (PTFE) semi-finished products — Part 1: Requirements and designation,Plastiques — Semi-produits en polytétrafluoroéthy
• ISO 13000-1:200537664,IS,,ISO 13000-1:2005,Plastics — Polytetrafluoroethylene (PTFE) semi-finished products — Part 1: Requirements and designation,Plastiques — Semi-produits en polytétrafluoroéth
• ISO 13000-2:199720477,IS,,ISO 13000-2:1997,Plastics — Polytetrafluoroethylene (PTFE) semi-finished products — Part 2: Preparation of test specimens and determination of properties,Plastiques — Sem
• ISO 13000-2:200537665,IS,,ISO 13000-2:2005,Plastics — Polytetrafluoroethylene (PTFE) semi-finished products — Part 2: Preparation of test specimens and determination of properties,Plastiques — Sem
• ISO 13006:19981732,IS,,ISO 13006:1998,"Ceramic tiles — Definitions, classification, characteristics and marking","Carreaux et dalles céramiques — Définitions, classification, caractéristiques et
• ISO 13006:201251063,IS,,ISO 13006:2012,"Ceramic tiles — Definitions, classification, characteristics and marking","Carreaux et dalles céramiques — Définitions, classification, caractéristiques e
• ISO 13007-1:200434750,IS,,ISO 13007-1:2004,"Ceramic tiles — Grouts and adhesives — Part 1: Terms, definitions and specifications for adhesives","Carreaux céramiques — Mortiers de joints et colles
• ISO 13007-1:2004/Cor 1:200643874,IS,Cor,ISO 13007-1:2004/Cor 1:2006,"Ceramic tiles — Grouts and adhesives — Part 1: Terms, definitions and specifications for adhesives — Technical Corrigendum 1","Carreaux cé
• ISO 13007-1:201054597,IS,,ISO 13007-1:2010,"Ceramic tiles — Grouts and adhesives — Part 1: Terms, definitions and specifications for adhesives","Carreaux céramiques — Mortiers de joints et colles
• ISO 13007-2:200534751,IS,,ISO 13007-2:2005,Ceramic tiles — Grouts and adhesives — Part 2: Test methods for adhesives,Carreaux céramiques — Mortiers de joints et colles — Partie 2: Méthodes d'essai
• ISO 13007-2:2005/Cor 1:200750169,IS,Cor,ISO 13007-2:2005/Cor 1:2007,Ceramic tiles — Grouts and adhesives — Part 2: Test methods for adhesives — Technical Corrigendum 1,Carreaux céramiques — Mortiers de joint
• ISO 13007-2:201054599,IS,,ISO 13007-2:2010,Ceramic tiles — Grouts and adhesives — Part 2: Test methods for adhesives,Carreaux céramiques — Mortiers de joints et colles — Partie 2: Méthodes d'essai
• ISO 13007-3:200434752,IS,,ISO 13007-3:2004,"Ceramic tiles — Grouts and adhesives — Part 3: Terms, definitions and specifications for grouts","Carreaux céramiques — Mortiers de joints et colles — P
• ISO 13007-4:200534753,IS,,ISO 13007-4:2005,Ceramic tiles — Grouts and adhesives — Part 4: Test methods for grouts,Carreaux céramiques — Mortiers de joints et colles — Partie 4: Méthodes d'essai po
• ISO 13007-4:201054601,IS,,ISO 13007-4:2010,Ceramic tiles — Grouts and adhesives — Part 4: Test methods for grouts,Carreaux céramiques — Mortiers de joints et colles — Partie 4: Méthodes d'essai po
• ISO 13008:201252326,IS,,ISO 13008:2012,Information and documentation — Digital records conversion and migration process,Information et documentation — Processus de conversion et migration des do
• ISO 13012-1:200944912,IS,,ISO 13012-1:2009,Rolling bearings — Accessories for sleeve type linear ball bearings — Part 1: Boundary dimensions and tolerances for series 1 and 3,Roulements — Accessoi
• ISO 13012-2:200944913,IS,,ISO 13012-2:2009,Rolling bearings — Accessories for sleeve type linear ball bearings — Part 2: Boundary dimensions and tolerances for series 5,Roulements — Accessoires po
• ISO 13012:19981700,IS,,ISO 13012:1998,"Rolling bearings, linear motion, recirculating ball, sleeve type — Accessories","Roulements à mouvement linéaire à recirculation de billes, douilles à bill
• ISO 13012:1998/Cor 1:199931677,IS,Cor,ISO 13012:1998/Cor 1:1999,"Rolling bearings, linear motion, recirculating ball, sleeve type — Accessories — Technical Corrigendum 1","Roulements à mouvement linéaire à
• ISO 13017:201252350,IS,,ISO 13017:2012,Dentistry — Magnetic attachments,Médecine bucco-dentaire — Attaches magnétiques,2012-07-13,1,['11.060.10'],ISO/TC 106/SC 2,9599,,[73578],"['en','fr']",9
• ISO 13017:2012/Amd 1:201563938,IS,Amd,ISO 13017:2012/Amd 1:2015,Dentistry — Magnetic attachments — Amendment 1,Médecine bucco-dentaire — Attaches magnétiques — Amendement 1,2015-11-13,1,['11.060.10'],ISO/T
• ISO 13032:201252425,IS,,ISO 13032:2012,Petroleum products — Determination of low concentration of sulfur in automotive fuels — Energy-dispersive X-ray fluorescence spectrometric method,Produits
• ISO 13041-1:200434654,IS,,ISO 13041-1:2004,Test conditions for numerically controlled turning machines and turning centres — Part 1: Geometric tests for machines with a horizontal workholding spin
• ISO 13041-2:200843027,IS,,ISO 13041-2:2008,Test conditions for numerically controlled turning machines and turning centres — Part 2: Geometric tests for machines with a vertical workholding spindl
• ISO 13041-5:200634659,IS,,ISO 13041-5:2006,"Test conditions for numerically controlled turning machines and turning centres — Part 5: Accuracy of feeds, speeds and interpolations","Conditions d'es
• ISO 13041-6:200534660,IS,,ISO 13041-6:2005,Test conditions for numerically controlled turning machines and turning centres — Part 6: Accuracy of a finished test piece,Conditions d'essai des tours
• ISO 13044-2:201352451,IS,,ISO 13044-2:2013,Road vehicles — Fully automatic coupling systems 24 V (FACS) for heavy commercial vehicle combinations — Part 2: 50 mm fifth wheel couplings — Electrical
• ISO 13050:19991278,IS,,ISO 13050:1999,Curvilinear toothed synchronous belt drive systems,Transmissions par courroies synchrones à denture curviligne,1999-12-16,1,['21.220.10'],ISO/TC 41/SC 4,959
• ISO 13050:201460482,IS,,ISO 13050:2014,"Synchronous belt drives — Metric pitch, curvilinear profile systems G, H, R and S, belts and pulleys","Transmissions synchrones — Pas métrique, systèmes à
• ISO 13061-13:201660075,IS,,ISO 13061-13:2016,Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 13: Determination of radial and tangential shrinkage,Pro
• ISO 13061-14:201660076,IS,,ISO 13061-14:2016,Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 14: Determination of volumetric shrinkage,Propriétés phy
• ISO 13061-15:201760077,IS,,ISO 13061-15:2017,Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 15: Determination of radial and tangential swelling,Prop
• ISO 13061-16:201760078,IS,,ISO 13061-16:2017,Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 16: Determination of volumetric swelling,Propriétés phys
• ISO 13063:201252522,IS,,ISO 13063:2012,Electrically propelled mopeds and motorcycles — Safety specifications,Cyclomoteurs et motocycles à propulsion électrique — Spécifications de sécurité,2012-
• ISO 13067:201152535,IS,,ISO 13067:2011,Microbeam analysis — Electron backscatter diffraction — Measurement of average grain size,Analyse par microfaisceaux — Diffraction d'électrons rétrodiffusé
• ISO 13076:201255361,IS,,ISO 13076:2012,Paints and varnishes — Lighting and procedure for visual assessments of coatings,Peintures et vernis — Éclairage et mode opératoire pour évaluations visuel
• ISO 13084:201152695,IS,,ISO 13084:2011,Surface chemical analysis — Secondary-ion mass spectrometry — Calibration of the mass scale for a time-of-flight secondary-ion mass spectrometer,Analyse ch
• ISO 13084:201873133,IS,,ISO 13084:2018,Surface chemical analysis — Secondary ion mass spectrometry — Calibration of the mass scale for a time-of-flight secondary ion mass spectrometer,Analyse ch
• ISO 13091-2:200327716,IS,,ISO 13091-2:2003,Mechanical vibration — Vibrotactile perception thresholds for the assessment of nerve dysfunction — Part 2: Analysis and interpretation of measurements a
• ISO 13099-2:201252832,IS,,ISO 13099-2:2012,Colloidal systems — Methods for zeta-potential determination — Part 2: Optical methods,Systèmes colloïdaux — Méthodes de détermination du potentiel zêta
• ISO 13105-1:201457236,IS,,ISO 13105-1:2014,Building construction machinery and equipment — Machinery for concrete surface floating and finishing — Part 1: Terms and commercial specifications,Machi
• ISO 13105-2:201462285,IS,,ISO 13105-2:2014,Building construction machinery and equipment — Machinery for concrete surface floating and finishing — Part 2: Safety requirements and verification,Mach
• ISO 13105-2:2014/Amd 1:201772561,IS,Amd,ISO 13105-2:2014/Amd 1:2017,Building construction machinery and equipment — Machinery for concrete surface floating and finishing — Part 2: Safety requirements and ver
• ISO 13110:201252898,IS,,ISO 13110:2012,Cigarettes — Determination of menthol in smoke condensates — Gas-chromatographic method,Cigarettes — Dosage du menthol dans les condensats de fumée — Métho
• ISO 13119:201252951,IS,,ISO 13119:2012,Health informatics — Clinical knowledge resources — Metadata,Informatique de santé — Ressources des connaissances cliniques — Métadonnées,2012-10-26,1,['35
• ISO 13120:201352952,IS,,ISO 13120:2013,Health informatics — Syntax to represent the content of healthcare classification systems — Classification Markup Language (ClaML),Informatique de santé —
• ISO 13132:201153054,IS,,ISO 13132:2011,Laboratory glassware — Petri dishes,Verrerie de laboratoire — Boîtes de Petri,2011-07-06,1,"['11.100.01','71.040.20']",ISO/TC 48,9599,,"[82979,74929]","['e
• ISO 13137:201353330,IS,,ISO 13137:2013,Workplace atmospheres — Pumps for personal sampling of chemical and biological agents — Requirements and test methods,Air des lieux de travail — Pompes pou
• ISO 13140-1:201668245,IS,,ISO 13140-1:2016,Electronic fee collection — Evaluation of on-board and roadside equipment for conformity to ISO 13141 — Part 1: Test suite structure and test purposes,Pe
• ISO 13141:201564166,IS,,ISO 13141:2015,Electronic fee collection — Localisation augmentation communication for autonomous systems,Perception de télépéage — Communications d'augmentation de local
• ISO 13141:2015/Amd 1:201770034,IS,Amd,ISO 13141:2015/Amd 1:2017,Electronic fee collection — Localisation augmentation communication for autonomous systems — Amendment 1,Perception de télépéage — Communicat
• ISO 13142:201553362,IS,,ISO 13142:2015,Electro-optical systems — Cavity ring-down technique for high-reflectance measurement,Systèmes électro-optiques — Technique d'alternance de la cavité pour
• ISO 13143-1:201668246,IS,,ISO 13143-1:2016,Electronic fee collection — Evaluation of on-board and roadside equipment for conformity to ISO 12813 — Part 1: Test suite structure and test purposes,Pe
• ISO 13143-1:202078354,IS,,ISO 13143-1:2020,Electronic fee collection — Evaluation of on-board and roadside equipment for conformity to ISO 12813 — Part 1: Test suite structure and test purposes,Pe
• ISO 13145:201253389,IS,,ISO 13145:2012,Rubber — Determination of viscosity and stress relaxation using a rotorless sealed shear rheometer,Caoutchouc — Détermination de la viscosité et de la rela
• ISO 13160:201253332,IS,,ISO 13160:2012,Water quality — Strontium 90 and strontium 89 — Test methods using liquid scintillation counting or proportional counting,Qualité de l'eau — Strontium 90 e
• ISO 13161:201153402,IS,,ISO 13161:2011,Water quality — Measurement of polonium 210 activity concentration in water by alpha spectrometry,Qualité de l'eau — Mesurage de l'activité du polonium 210
• ISO 13162:201153403,IS,,ISO 13162:2011,Water quality — Determination of carbon 14 activity — Liquid scintillation counting method,Qualité de l'eau — Détermination de l'activité volumique du carb
• ISO 13163:201356463,IS,,ISO 13163:2013,Water quality — Lead-210 — Test method using liquid scintillation counting,Qualité de l'eau — Plomb 210 — Méthode d'essai par comptage des scintillations e
• ISO 13164-4:201562424,IS,,ISO 13164-4:2015,Water quality — Radon-222 — Part 4: Test method using two-phase liquid scintillation counting,Qualité de l'eau — Radon 222 — Partie 4: Méthode d'essai pa
• ISO 13165-1:201356464,IS,,ISO 13165-1:2013,Water quality — Radium-226 — Part 1: Test method using liquid scintillation counting,Qualité de l'eau — Radium 226 — Partie 1: Méthode d'essai par compta
• ISO 13165-2:201453406,IS,,ISO 13165-2:2014,Water quality — Radium-226 — Part 2: Test method using emanometry,Qualité de l'eau — Radium 226 — Partie 2: Méthode d'essai par émanométrie,2014-04-17,1,
• ISO 13165-3:201660146,IS,,ISO 13165-3:2016,Water quality — Radium-226 — Part 3: Test method using coprecipitation and gamma-spectrometry,Qualité de l'eau — Radium 226 — Partie 3: Méthode d'essai p
• ISO 13166:201459209,IS,,ISO 13166:2014,Water quality — Uranium isotopes — Test method using alpha-spectrometry,Qualité de l'eau — Isotopes de l'uranium — Méthode d'essai par spectrométrie alpha,
• ISO 13167:201553408,IS,,ISO 13167:2015,"Water quality — Plutonium, americium, curium and neptunium — Test method using alpha spectrometry","Qualité de l'eau — Plutonium, americium, curium et nep
• ISO 13168:201553409,IS,,ISO 13168:2015,Water quality — Simultaneous determination of tritium and carbon 14 activities — Test method using liquid scintillation counting,Qualité de l'eau — Détermi
• ISO 13179-1:201453448,IS,,ISO 13179-1:2014,Implants for surgery — Plasma-sprayed unalloyed titanium coatings on metallic surgical implants — Part 1: General requirements,"Implants chirurgicaux — R
• ISO 13196:201353490,IS,,ISO 13196:2013,Soil quality — Screening soils for selected elements by energy-dispersive X-ray fluorescence spectrometry using a handheld or portable instrument,Qualité d
• ISO 13209-2:201253509,IS,,ISO 13209-2:2012,Road vehicles — Open Test sequence eXchange format (OTX) — Part 2: Core data model specification and requirements,Véhicules routiers — Format public d'éc
• ISO 13209-3:201255599,IS,,ISO 13209-3:2012,Road vehicles — Open Test sequence eXchange format (OTX) — Part 3: Standard extensions and requirements,Véhicules routiers — Format public d'échange de s
• ISO 13209-4:202174090,IS,,ISO 13209-4:2021,Road vehicles — Open Test sequence eXchange format (OTX) — Part 4: Expanded extensions interface definition,Véhicules routiers — Format public d'échange
• ISO 13212:199921415,IS,,ISO 13212:1999,Ophthalmic optics — Contact lens care products — Guidelines for determination of shelf-life,Optique ophtalmique — Produits d'entretien pour lentilles de c
• ISO 13212:201157207,IS,,ISO 13212:2011,Ophthalmic optics — Contact lens care products — Guidelines for determination of shelf-life,Optique ophtalmique — Produits d'entretien pour lentilles de c
• ISO 13215-2:199923261,IS,,ISO 13215-2:1999,Road vehicles — Reduction of misuse risk of child restraint systems — Part 2: Requirements and test procedures for correct installation (panel method),Vé
• ISO 13215-3:199923262,IS,,ISO 13215-3:1999,Road vehicles — Reduction of misuse risk of child restraint systems — Part 3: Prediction and assessment of misuse by Misuse Mode and Effect Analysis (MME
• ISO 13216-3:200637419,IS,,ISO 13216-3:2006,Road vehicles — Anchorages in vehicles and attachments to anchorages for child restraint systems — Part 3: Classification of child restraint dimensions a
• ISO 13226:199921450,IS,,ISO 13226:1999,Rubber — Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers,Caoutchouc — Élastomères de référence normalis
• ISO 13226:200541625,IS,,ISO 13226:2005,Rubber — Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers,Caoutchouc — Élastomères de référence normalis
• ISO 13226:2005/Cor 1:200746584,IS,Cor,ISO 13226:2005/Cor 1:2007,Rubber — Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers — Technical Corrigendum 1,Caoutc
• ISO 13226:201153034,IS,,ISO 13226:2011,Rubber — Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers,Caoutchouc — Élastomères de référence normalis
• ISO 13232-1:199624803,IS,,ISO 13232-1:1996,"Motorcycles — Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles — Part 1: Definitions, symbol
• ISO 13232-2:199624804,IS,,ISO 13232-2:1996,Motorcycles — Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles — Part 2: Definition of impact
• ISO 13232-3:199624805,IS,,ISO 13232-3:1996,Motorcycles — Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles — Part 3: Anthropometric impac
• ISO 13232-4:199624806,IS,,ISO 13232-4:1996,"Motorcycles — Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles — Part 4: Variables to be mea
• ISO 13232-5:199624807,IS,,ISO 13232-5:1996,Motorcycles — Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles — Part 5: Injury indices and r
• ISO 13232-6:199624808,IS,,ISO 13232-6:1996,Motorcycles — Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles — Part 6: Full-scale impact-te
• ISO 13232-7:199624809,IS,,ISO 13232-7:1996,Motorcycles — Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles — Part 7: Standardized procedu
• ISO 13232-8:199624810,IS,,ISO 13232-8:1996,Motorcycles — Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles — Part 8: Documentation and re
• ISO 13253:19952907,IS,,ISO 13253:1995,Ducted air-conditioners and air-to-air heat pumps — Testing and rating for performance,Climatiseurs et pompes à chaleur air/air raccordés — Essais et déterm
• ISO 13253:201154064,IS,,ISO 13253:2011,Ducted air-conditioners and air-to-air heat pumps — Testing and rating for performance,Climatiseurs et pompes à chaleur air/air raccordés — Essais et déter
• ISO 13256-1:19983330,IS,,ISO 13256-1:1998,Water-source heat pumps — Testing and rating for performance — Part 1: Water-to-air and brine-to-air heat pumps,Pompes à chaleur à eau — Essais et détermi
• ISO 13256-2:199826945,IS,,ISO 13256-2:1998,Water-source heat pumps — Testing and rating for performance — Part 2: Water-to-water and brine-to-water heat pumps,Pompes à chaleur à eau — Essais et dé
• ISO 13257:201053556,IS,,ISO 13257:2010,Thermoplastics piping systems for non-pressure applications — Test method for resistance to elevated temperature cycling,Systèmes de canalisations thermopl
• ISO 13259:201053557,IS,,ISO 13259:2010,Thermoplastics piping systems for underground non-pressure applications — Test method for leaktightness of elastomeric sealing ring type joints,Systèmes de
• ISO 13259:201869999,IS,,ISO 13259:2018,Thermoplastics piping systems for underground non-pressure applications — Test method for leaktightness of elastomeric sealing ring type joints,Systèmes de
• ISO 13265:201053562,IS,,ISO 13265:2010,Thermoplastics piping systems for non-pressure underground drainage and sewerage — Joints for buried non-pressure applications — Test method for the long-t
• ISO 13266:201053563,IS,,ISO 13266:2010,Thermoplastics piping systems for non-pressure underground drainage and sewerage — Thermoplastics shafts or risers for inspection chambers and manholes — D
• ISO 13267:201053564,IS,,ISO 13267:2010,Thermoplastics piping systems for non-pressure underground drainage and sewerage — Thermoplastics inspection chamber and manhole bases — Test methods for b
• ISO 13268:201053565,IS,,ISO 13268:2010,Thermoplastics piping systems for non-pressure underground drainage and sewerage — Thermoplastics shafts or risers for inspection chambers and manholes — D
• ISO 13272:201153583,IS,,ISO 13272:2011,"Plastics piping systems for non-pressure underground drainage and sewerage — Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP), polypropylene
• ISO 13276:199721500,IS,,ISO 13276:1997,Tobacco and tobacco products — Determination of nicotine purity — Gravimetric method using tungstosilicic acid,Tabac et produits du tabac — Détermination d
• ISO 13276:201762773,IS,,ISO 13276:2017,Tobacco and tobacco products — Determination of nicotine purity — Gravimetric method using tungstosilicic acid,Tabac et produits du tabac — Détermination d
• ISO 13284:200334067,IS,,ISO 13284:2003,Fork-lift trucks — Fork-arm extensions and telescopic fork arms — Technical characteristics and strength requirements,Chariots élévateurs à fourche — Exten
• ISO 13284:202280192,IS,,ISO 13284:2022,Industrial trucks — Fork arm extensions and telescopic fork arms — Technical characteristics and strength requirements,Chariots de manutention — Extensions
• ISO 13287:200642977,IS,,ISO 13287:2006,Personal protective equipment — Footwear — Test method for slip resistance,Équipement de protection individuelle — Chaussures — Méthode d'essai pour la rés
• ISO 13287:201250943,IS,,ISO 13287:2012,Personal protective equipment — Footwear — Test method for slip resistance,Équipement de protection individuelle — Chaussures — Méthode d'essai pour la rés
• ISO 13291:199721570,IS,,ISO 13291:1997,Zinc sulfide concentrates — Determination of zinc content — Solvent extraction and EDTA titrimetric method,Concentrés sulfurés de zinc — Dosage du zinc — M
• ISO 13292:199721571,IS,,ISO 13292:1997,"Copper, lead and zinc sulfide concentrates — Experimental methods for checking the bias of sampling","Concentrés sulfurés de cuivre, de plomb et de zinc —
• ISO 13294:199720419,IS,,ISO 13294:1997,Dental handpieces — Dental air-motors,Pièces à main dentaires — Moteurs dentaires à air,1997-04-24,1,['11.060.20'],ISO/TC 106/SC 4,9599,,[54805],"['en','fr
• ISO 13295:199421574,IS,,ISO 13295:1994,Dental rotary instruments — Mandrels,Instruments rotatifs dentaires — Mandrins,1994-12-15,1,['11.060.20'],ISO/TC 106/SC 4,9599,,[40369],"['en','fr']",3
• ISO 13296:199721602,IS,,ISO 13296:1997,Diesel engines — High-pressure fuel injection pipe assemblies — General requirements and dimensions,Moteurs diesels — Lignes assemblées d'injection de carb
• ISO 13296:1997/Cor 1:200033523,IS,Cor,ISO 13296:1997/Cor 1:2000,Diesel engines — High-pressure fuel injection pipe assemblies — General requirements and dimensions — Technical Corrigendum 1,Moteurs diesels
• ISO 13296:200536625,IS,,ISO 13296:2005,Diesel engines — High-pressure fuel injection pipe assemblies — General requirements and dimensions,Moteurs diesels — Lignes assemblées d'injection de carb
• ISO 13296:201252965,IS,,ISO 13296:2012,Diesel engines — High-pressure fuel injection pipe assemblies — General requirements and dimensions,Moteurs diesels — Lignes assemblées d'injection de carb
• ISO 13296:201669501,IS,,ISO 13296:2016,Diesel engines — High-pressure fuel injection pipe assemblies — General requirements and dimensions,Moteurs diesels — Lignes assemblées d'injection de carb
• ISO 13297:199521603,IS,,ISO 13297:1995,Small craft — Electrical systems — Alternating current installations,Navires de plaisance — Systèmes électriques — Installations de distribution de courant
• ISO 13297:200027316,IS,,ISO 13297:2000,Small craft — Electrical systems — Alternating current installations,Petits navires — Systèmes électriques — Installations de distribution de courant alter
• ISO 13297:201246477,IS,,ISO 13297:2012,Small craft — Electrical systems — Alternating current installations,Petits navires — Systèmes électriques — Installations à courant alternatif,2012-10-02,
• ISO 13297:201466210,IS,,ISO 13297:2014,Small craft — Electrical systems — Alternating current installations,Petits navires — Systèmes électriques — Installations à courant alternatif,2014-12-05,
• ISO 13299:200337227,IS,,ISO 13299:2003,Sensory analysis — Methodology — General guidance for establishing a sensory profile,Analyse sensorielle — Méthodologie — Directives générales pour l'établ
• ISO 13301:200236791,IS,,ISO 13301:2002,"Sensory analysis — Methodology — General guidance for measuring odour, flavour and taste detection thresholds by a three-alternative forced-choice (3-AFC)
• ISO 13304-1:201353662,IS,,ISO 13304-1:2013,Radiological protection — Minimum criteria for electron paramagnetic resonance (EPR) spectroscopy for retrospective dosimetry of ionizing radiation — Par
• ISO 13312:199721682,IS,,ISO 13312:1997,Iron ores — Determination of potassium content — Flame atomic absorption spectrometric method,Minerais de fer — Dosage du potassium — Méthode par spectromé
• ISO 13312:200639731,IS,,ISO 13312:2006,Iron ores — Determination of potassium —- Flame atomic absorption spectrometric method,Minerais de fer — Dosage du potassium — Méthode par spectrométrie d'
• ISO 13313:199721683,IS,,ISO 13313:1997,Iron ores — Determination of sodium content — Flame atomic absorption spectrometric method,Minerais de fer — Dosage du sodium — Méthode par spectrométrie d
• ISO 13313:200639732,IS,,ISO 13313:2006,Iron ores — Determination of sodium — Flame atomic absorption spectrometric method,Minerais de fer — Dosage du sodium — Méthode par spectrométrie d'absorp
• ISO 13315-1:201253687,IS,,ISO 13315-1:2012,Environmental management for concrete and concrete structures — Part 1: General principles,Management environnemental du béton et des structures en béton
• ISO 13315-2:201457645,IS,,ISO 13315-2:2014,Environmental management for concrete and concrete structures — Part 2: System boundary and inventory data,Management environnemental du béton et des str
• ISO 13317-1:200121703,IS,,ISO 13317-1:2001,Determination of particle size distribution by gravitational liquid sedimentation methods — Part 1: General principles and guidelines,Détermination de la
• ISO 13318-1:200121704,IS,,ISO 13318-1:2001,Determination of particle size distribution by centrifugal liquid sedimentation methods — Part 1: General principles and guidelines,Détermination de la d
• ISO 13318-2:200131502,IS,,ISO 13318-2:2001,Determination of particle size distribution by centrifugal liquid sedimentation methods — Part 2: Photocentrifuge method,Détermination de la distribution
• ISO 13319:200021705,IS,,ISO 13319:2000,Determination of particle size distributions — Electrical sensing zone method,Détermination des répartitions granulométriques — Méthode de la zone de détec
• ISO 13319:200742354,IS,,ISO 13319:2007,Determination of particle size distributions — Electrical sensing zone method,Détermination des répartitions granulométriques — Méthode de la zone de détec
• ISO 13320-1:199921706,IS,,ISO 13320-1:1999,Particle size analysis — Laser diffraction methods — Part 1: General principles,Analyse granulométrique — Méthodes par diffraction laser — Partie 1: Prin
• ISO 13320:200944929,IS,,ISO 13320:2009,Particle size analysis — Laser diffraction methods,Analyse granulométrique — Méthodes par diffraction laser,2009-09-18,1,['19.120'],ISO/TC 24/SC 4,9599,[21
• ISO 13321:199621707,IS,,ISO 13321:1996,Particle size analysis — Photon correlation spectroscopy,Analyse granulométrique — Spectroscopie par corrélation de photons,1996-07-11,1,['19.120'],ISO/TC
• ISO 13322-1:200438664,IS,,ISO 13322-1:2004,Particle size analysis — Image analysis methods — Part 1: Static image analysis methods,Analyse granulométrique — Méthodes par analyse d'images — Partie
• ISO 13322-2:200638665,IS,,ISO 13322-2:2006,Particle size analysis — Image analysis methods — Part 2: Dynamic image analysis methods,Analyse granulométrique — Méthodes par analyse d'images — Partie
• ISO 13323-1:200021709,IS,,ISO 13323-1:2000,Determination of particle size distribution — Single-particle light interaction methods — Part 1: Light interaction considerations,Détermination de la di
• ISO 13325:200335528,IS,,ISO 13325:2003,Tyres — Coast-by methods for measurement of tyre-to-road sound emission,Pneumatiques — Méthodes en roue libre pour le mesurage de l'émission acoustique iss
• ISO 13327:199821716,IS,,ISO 13327:1998,Motorcycle tyres — Method of measuring rolling resistance,Pneumatiques pour motocycles — Méthode de mesure de la résistance au roulement,1998-09-03,1,['83.
• ISO 13332:200021729,IS,,ISO 13332:2000,Reciprocating internal combustion engines — Test code for the measurement of structure-borne noise emitted from high-speed and medium-speed reciprocating i
• ISO 13337:199721734,IS,,ISO 13337:1997,"Spring-type straight pins — Slotted, light duty","Goupilles cylindriques creuses, dites goupilles élastiques — Série mince",1997-11-06,1,['21.060.50'],ISO
• ISO 13338:199521740,IS,,ISO 13338:1995,Determination of tissue corrosiveness of a gas or gas mixture,Détermination de la corrosivité des gaz ou mélanges de gaz sur les tissus,1995-11-09,1,['71.1
• ISO 13338:201765112,IS,,ISO 13338:2017,Gas cylinders — Gases and gas mixtures — Determination of tissue corrosiveness for the selection of cylinder valve outlets,Bouteilles à gaz — Gaz et mélang
• ISO 13340:200121742,IS,,ISO 13340:2001,Transportable gas cylinders — Cylinders valves for non-refillable cylinders — Specification and prototype testing,Bouteilles à gaz transportables — Robinet
• ISO 13341:199721743,IS,,ISO 13341:1997,Transportable gas cylinders — Fitting of valves to gas cylinders,Bouteilles à gaz transportables — Montage des robinets sur les bouteilles à gaz,1997-10-16
• ISO 13341:1997/Cor 1:199830563,IS,Cor,ISO 13341:1997/Cor 1:1998,Transportable gas cylinders — Fitting of valves to gas cylinders — Technical Corrigendum 1,Bouteilles à gaz transportables — Montage des robi
• ISO 13341:201050503,IS,,ISO 13341:2010,Gas cylinders — Fitting of valves to gas cylinders,Bouteilles à gaz — Montage des robinets sur les bouteilles à gaz,2010-09-30,2,['23.020.35'],ISO/TC 58,95
• ISO 13341:2010/Amd 1:201559968,IS,Amd,ISO 13341:2010/Amd 1:2015,Gas cylinders — Fitting of valves to gas cylinders — Amendment 1,Bouteilles à gaz — Montage des robinets sur les bouteilles à gaz — Amendemen
• ISO 13344:199621617,IS,,ISO 13344:1996,Determination of the lethal toxic potency of fire effluents,Détermination du pouvoir toxique létal des effluents du feu,1996-12-12,1,['13.220.99'],ISO/TC 9
• ISO 13344:200437850,IS,,ISO 13344:2004,Estimation of the lethal toxic potency of fire effluents,Détermination du pouvoir toxique létal des effluents du feu,2004-10-14,2,['13.220.99'],ISO/TC 92/S
• ISO 13347-1:200434435,IS,,ISO 13347-1:2004,Industrial fans — Determination of fan sound power levels under standardized laboratory conditions — Part 1: General overview,Ventilateurs industriels —
• ISO 13347-1:2004/Amd 1:201056775,IS,Amd,ISO 13347-1:2004/Amd 1:2010,Industrial fans — Determination of fan sound power levels under standardized laboratory conditions — Part 1: General overview — Amendment 1
• ISO 13347-1:2004/Cor 1:200644485,IS,Cor,ISO 13347-1:2004/Cor 1:2006,Industrial fans — Determination of fan sound power levels under standardized laboratory conditions — Part 1: General overview — Technical C
• ISO 13347-2:200429752,IS,,ISO 13347-2:2004,Industrial fans — Determination of fan sound power levels under standardized laboratory conditions — Part 2: Reverberant room method,Ventilateurs industr
• ISO 13347-2:2004/Cor 1:200644484,IS,Cor,ISO 13347-2:2004/Cor 1:2006,Industrial fans — Determination of fan sound power levels under standardized laboratory conditions — Part 2: Reverberant room method — Tech
• ISO 13347-3:200429753,IS,,ISO 13347-3:2004,Industrial fans — Determination of fan sound power levels under standardized laboratory conditions — Part 3: Enveloping surface methods,Ventilateurs indu
• ISO 13347-3:2004/Amd 1:201056776,IS,Amd,ISO 13347-3:2004/Amd 1:2010,Industrial fans — Determination of fan sound power levels under standardized laboratory conditions — Part 3: Enveloping surface methods — A
• ISO 13347-3:2004/Cor 1:200644121,IS,Cor,ISO 13347-3:2004/Cor 1:2006,Industrial fans — Determination of fan sound power levels under standardized laboratory conditions — Part 3: Enveloping surface methods — T
• ISO 13347-4:200429754,IS,,ISO 13347-4:2004,Industrial fans — Determination of fan sound power levels under standardized laboratory conditions — Part 4: Sound intensity method,Ventilateurs industri
• ISO 13347-4:2004/Cor 1:200644483,IS,Cor,ISO 13347-4:2004/Cor 1:2006,Industrial fans — Determination of fan sound power levels under standardized laboratory conditions — Part 4: Sound intensity method — Techn
• ISO 13348:200639161,IS,,ISO 13348:2006,"Industrial fans — Tolerances, methods of conversion and technical data presentation","Ventilateurs industriels — Tolérances, méthodes de conversion et pré
• ISO 13348:200745118,IS,,ISO 13348:2007,"Industrial fans — Tolerances, methods of conversion and technical data presentation","Ventilateurs industriels — Tolérances, méthodes de conversion et pré
• ISO 13349:199921759,IS,,ISO 13349:1999,Industrial fans — Vocabulary and definitions of categories,Ventilateurs industriels — Vocabulaire et définitions des catégories,1999-10-14,1,"['23.120','01
• ISO 13349:201046450,IS,,ISO 13349:2010,Fans — Vocabulary and definitions of categories,Ventilateurs — Vocabulaire et définitions des catégories,2010-06-22,2,"['23.120','01.040.23']",ISO/TC 117,9
• ISO 13350:199921760,IS,,ISO 13350:1999,Industrial fans — Performance testing of jet fans,Ventilateurs industriels — Essai de performance des ventilateurs accélérateurs,1999-10-14,1,['23.120'],IS
• ISO 13351:199621761,IS,,ISO 13351:1996,Industrial fans — Dimensions,Ventilateurs industriels — Dimensions,1996-06-20,1,['23.120'],ISO/TC 117,9599,,[52816],"['en','fr']",10
• ISO 13351:200952816,IS,,ISO 13351:2009,Fans — Dimensions,Ventilateurs — Dimensions,2009-11-04,2,['23.120'],ISO/TC 117,9599,"[21761,41116]","[86061,78383]","['en','fr']",13
• ISO 13355:200135211,IS,,ISO 13355:2001,"Packaging — Complete, filled transport packages and unit loads — Vertical random vibration test",Emballages — Emballages d'expédition complets et pleins e
• ISO 13356:199721234,IS,,ISO 13356:1997,Implants for surgery — Ceramic materials based on yttria-stabilized tetragonal zirconia (Y-TZP),Implants chirurgicaux — Produits céramiques à base de zirco
• ISO 13356:200840166,IS,,ISO 13356:2008,Implants for surgery — Ceramic materials based on yttria-stabilized tetragonal zirconia (Y-TZP),Implants chirurgicaux — Produits céramiques à base de zirco
• ISO 13357-1:200221051,IS,,ISO 13357-1:2002,Petroleum products — Determination of the filterability of lubricating oils — Part 1: Procedure for oils in the presence of water,Produits pétroliers — D
• ISO 13357-1:201766352,IS,,ISO 13357-1:2017,Petroleum products — Determination of the filterability of lubricating oils — Part 1: Procedure for oils in the presence of water,Produits pétroliers — D
• ISO 13357-2:199822471,IS,,ISO 13357-2:1998,Petroleum products — Determination of the filterability of lubricating oils — Part 2: Procedure for dry oils,Produits pétroliers — Détermination de la fi
• ISO 13357-2:200542258,IS,,ISO 13357-2:2005,Petroleum products — Determination of the filterability of lubricating oils — Part 2: Procedure for dry oils,Produits pétroliers — Détermination de la fi
• ISO 13357-2:201766353,IS,,ISO 13357-2:2017,Petroleum products — Determination of the filterability of lubricating oils — Part 2: Procedure for dry oils,Produits pétroliers — Détermination de la fi
• ISO 13359:19982863,IS,,ISO 13359:1998,Measurement of conductive liquid flow in closed conduits — Flanged electromagnetic flowmeters — Overall length,Mesurage du débit des liquides conducteurs da
• ISO 13363:200434469,IS,,ISO 13363:2004,Rubber and plastics hoses for marine-engine wet-exhaust systems — Specification,Tuyaux d'échappement en caoutchouc et en plastique pour moteurs de bateaux
• ISO 13363:2004/Cor 1:200851190,IS,Cor,ISO 13363:2004/Cor 1:2008,Rubber and plastics hoses for marine-engine wet-exhaust systems — Specification — Technical Corrigendum 1,Tuyaux d'échappement en caoutchouc
• ISO 13365:201153718,IS,,ISO 13365:2011,"Leather — Chemical tests — Determination of the preservative (TCMTB, PCMC, OPP, OIT) content in leather by liquid chromatography","Cuir — Essais chimiques
• ISO 13366-1:199721796,IS,,ISO 13366-1:1997,Milk — Enumeration of somatic cells — Part 1: Microscopic method,Lait — Dénombrement des cellules somatiques — Partie 1: Méthode au microscope,1997-06-12
• ISO 13366-2:199721797,IS,,ISO 13366-2:1997,Milk — Enumeration of somatic cells — Part 2: Electronic particle counter method,Lait — Dénombrement des cellules somatiques — Partie 2: Méthode au compt
• ISO 13366-3:199721798,IS,,ISO 13366-3:1997,Milk — Enumeration of somatic cells — Part 3: Fluoro-opto-electronic method,Lait — Dénombrement des cellules somatiques — Partie 3: Méthode fluoro-opto-é
• ISO 13370:199821813,IS,,ISO 13370:1998,Thermal performance of buildings — Heat transfer via the ground — Calculation methods,Performance thermique des bâtiments —Transfert de chaleur par le sol
• ISO 13370:200740965,IS,,ISO 13370:2007,Thermal performance of buildings — Heat transfer via the ground — Calculation methods,Performance thermique des bâtiments — Transfert de chaleur par le sol
• ISO 13372:200421830,IS,,ISO 13372:2004,Condition monitoring and diagnostics of machines — Vocabulary,Surveillance et diagnostic des machines — Vocabulaire,2004-05-27,1,"['01.040.17','17.160']",I
• ISO 13373-2:200533163,IS,,ISO 13373-2:2005,"Condition monitoring and diagnostics of machines — Vibration condition monitoring — Part 2: Processing, analysis and presentation of vibration data","Su
• ISO 13373-9:201762190,IS,,ISO 13373-9:2017,Condition monitoring and diagnostics of machines — Vibration condition monitoring — Part 9: Diagnostic techniques for electric motors,Surveillance et dia
• ISO 13379-1:201239836,IS,,ISO 13379-1:2012,Condition monitoring and diagnostics of machines — Data interpretation and diagnostics techniques — Part 1: General guidelines,Surveillance et diagnostic
• ISO 13379:200321839,IS,,ISO 13379:2003,Condition monitoring and diagnostics of machines — General guidelines on data interpretation and diagnostics techniques,Surveillance et diagnostic d'état d
• ISO 13380:200221840,IS,,ISO 13380:2002,Condition monitoring and diagnostics of machines — General guidelines on using performance parameters,Surveillance et diagnostic d'état des machines — Reco
• ISO 13381-1:200421841,IS,,ISO 13381-1:2004,Condition monitoring and diagnostics of machines — Prognostics — Part 1: General guidelines,Surveillance et diagnostic des machines — Pronostic — Parti
• ISO 13381-1:201551436,IS,,ISO 13381-1:2015,Condition monitoring and diagnostics of machines — Prognostics — Part 1: General guidelines,Surveillance et diagnostic des machines — Pronostic — Parti
• ISO 13385-1:201142799,IS,,ISO 13385-1:2011,Geometrical product specifications (GPS) — Dimensional measuring equipment — Part 1: Callipers; Design and metrological characteristics,Spécification géo
• ISO 13385-2:201142801,IS,,ISO 13385-2:2011,Geometrical product specifications (GPS) — Dimensional measuring equipment — Part 2: Calliper depth gauges; Design and metrological characteristics,Spéci
• ISO 13397-2:199621886,IS,,ISO 13397-2:1996,"Periodontal curettes, dental scalers and excavators — Part 2: Periodontal curettes — Gr-type","Curettes parodontales, instruments dentaires pour détartr
• ISO 13397-2:1996/Cor 1:199729881,IS,Cor,ISO 13397-2:1996/Cor 1:1997,"Periodontal curettes, dental scalers and excavators — Part 2: Periodontal curettes — Gr-type — Technical Corrigendum 1","Curettes parodont
• ISO 13397-4:199723078,IS,,ISO 13397-4:1997,"Periodontal curettes, dental scalers and excavators — Part 4: Dental excavators — Discoid-type","Curettes parodontales, instruments dentaires pour détar
• ISO 13398:199721888,IS,,ISO 13398:1997,Refrigerated light hydrocarbon fluids — Liquefied natural gas — Procedure for custody transfer on board ship,Hydrocarbures légers réfrigérés — Gaz naturels
• ISO 13400-1:201153765,IS,,ISO 13400-1:2011,Road vehicles — Diagnostic communication over Internet Protocol (DoIP) — Part 1: General information and use case definition,Véhicules routiers — Communi
• ISO 13400-2:201253766,IS,,ISO 13400-2:2012,Road vehicles - Diagnostic communication over Internet Protocol (DoIP) — Part 2: Transport protocol and network layer services,Véhicules routiers — Commu
• ISO 13400-2:201974785,IS,,ISO 13400-2:2019,Road vehicles — Diagnostic communication over Internet Protocol (DoIP) — Part 2: Transport protocol and network layer services,Véhicules routiers — Commu
• ISO 13400-2:2019/Amd 1:202384208,IS,Amd,ISO 13400-2:2019/Amd 1:2023,Road vehicles — Diagnostic communication over Internet Protocol (DoIP) — Part 2: Transport protocol and network layer services — Amendment
• ISO 13400-3:201153767,IS,,ISO 13400-3:2011,Road vehicles — Diagnostic communication over Internet Protocol (DoIP) — Part 3: Wired vehicle interface based on IEEE 802.3,Véhicules routiers — Communi
• ISO 13402:199521241,IS,,ISO 13402:1995,"Surgical and dental hand instruments — Determination of resistance against autoclaving, corrosion and thermal exposure","Instruments chirurgicaux et denta
• ISO 13404:200741480,IS,,ISO 13404:2007,Prosthetics and orthotics — Categorization and description of external orthoses and orthotic components,Prothèses et orthèses — Classification et descripti
• ISO 13405-1:199621915,IS,,ISO 13405-1:1996,Prosthetics and orthotics — Classification and description of prosthetic components — Part 1: Classification of prosthetic components,Prothèses et orthès
• ISO 13405-2:199621916,IS,,ISO 13405-2:1996,Prosthetics and orthotics — Classification and description of prosthetic components — Part 2: Description of lower-limb prosthetic components,Prothèses e
• ISO 13405-3:199621917,IS,,ISO 13405-3:1996,Prosthetics and orthotics — Classification and description of prosthetic components — Part 3: Description of upper-limb prosthetic components,Prothèses e
• ISO 13406-1:199925671,IS,,ISO 13406-1:1999,Ergonomic requirements for work with visual displays based on flat panels — Part 1: Introduction,Exigences ergonomiques pour travail sur écrans de visual
• ISO 13406-2:200125670,IS,,ISO 13406-2:2001,Ergonomic requirements for work with visual displays based on flat panels — Part 2: Ergonomic requirements for flat panel displays,Exigences ergonomiques
• ISO 13407:199921197,IS,,ISO 13407:1999,Human-centred design processes for interactive systems,Processus de conception centrée sur l'opérateur humain pour les systèmes interactifs,1999-06-10,1,['
• ISO 13408-1:199821925,IS,,ISO 13408-1:1998,Aseptic processing of health care products — Part 1: General requirements,Traitement aseptique des produits de santé — Partie 1: Exigences générales,1998
• ISO 13408-1:200837842,IS,,ISO 13408-1:2008,Aseptic processing of health care products — Part 1: General requirements,Traitement aseptique des produits de santé — Partie 1: Exigences générales,2008
• ISO 13408-1:2008/Amd 1:201359475,IS,Amd,ISO 13408-1:2008/Amd 1:2013,Aseptic processing of health care products — Part 1: General requirements — Amendment 1,Traitement aseptique des produits de santé — Partie
• ISO 13408-2:200330058,IS,,ISO 13408-2:2003,Aseptic processing of health care products — Part 2: Filtration,Traitement aseptique des produits de santé — Partie 2: Filtration,2003-03-26,1,['11.080.0
• ISO 13408-6:200539782,IS,,ISO 13408-6:2005,Aseptic processing of health care products — Part 6: Isolator systems,Traitement aseptique des produits de santé — Partie 6: Systèmes isolateurs,2005-06-
• ISO 13408-6:2005/Amd 1:201359476,IS,Amd,ISO 13408-6:2005/Amd 1:2013,Aseptic processing of health care products — Part 6: Isolator systems — Amendment 1,Traitement aseptique des produits de santé — Partie 6:
• ISO 13419:199721968,IS,,ISO 13419:1997,Space data and information transfer systems — Packet telemetry,Systèmes de transfert des informations et données spatiales — Télémesure par paquets,1997-12
• ISO 13420:199721969,IS,,ISO 13420:1997,Space data and information transfer systems — Advanced orbiting systems — Networks and data links — Architectural specification,Systèmes de transfert des i
• ISO 13426-1:200336937,IS,,ISO 13426-1:2003,Geotextiles and geotextile-related products — Strength of internal structural junctions — Part 1: Geocells,Géotextiles et produits apparentés — Résistanc
• ISO 13426-2:200536938,IS,,ISO 13426-2:2005,Geotextiles and geotextile-related products — Strength of internal structural junctions — Part 2: Geocomposites,Géotextiles et produits apparentés — Rési
• ISO 13427:199821992,IS,,ISO 13427:1998,Geotextiles and geotextile-related products — Abrasion damage simulation (sliding block test),Géotextiles et produits apparentés — Simulation de l'endommag
• ISO 13428:200536713,IS,,ISO 13428:2005,Geosynthetics — Determination of the protection efficiency of a geosynthetic against impact damage,Géosynthétiques — Détermination de l'efficacité de prote
• ISO 13431:199921996,IS,,ISO 13431:1999,Geotextiles and geotextile-related products — Determination of tensile creep and creep rupture behaviour,Géotextiles et produits apparentés — Détermination
• ISO 13433:200636718,IS,,ISO 13433:2006,Geosynthetics — Dynamic perforation test (cone drop test),Géosynthétiques — Essai de perforation dynamique (essai par chute d'un cône),2006-08-07,1,['59.08
• ISO 13437:199825121,IS,,ISO 13437:1998,"Geotextiles and geotextile-related products — Method for installing and extracting samples in soil, and testing specimens in laboratory",Géotextiles et pr
• ISO 13438:200436898,IS,,ISO 13438:2004,Geotextiles and geotextile-related products — Screening test method for determining the resistance to oxidation,Géotextiles et produits apparentés — Méthod
• ISO 13442:200437524,IS,,ISO 13442:2004,Tyres and rims for construction machines,Pneumatiques et jantes pour engins de construction,2004-03-30,1,"['91.220','83.160.99']",ISO/TC 31/SC 6,9599,,[634
• ISO 13445:199522013,IS,,ISO 13445:1995,Adhesives — Determination of shear strength of adhesive bonds between rigid substrates by the block-shear method,Adhésifs — Détermination de la résistance
• ISO 13448-1:200537429,IS,,ISO 13448-1:2005,Acceptance sampling procedures based on the allocation of priorities principle (APP) — Part 1: Guidelines for the APP approach,Règles d'échantillonnage p
• ISO 13448-2:200437430,IS,,ISO 13448-2:2004,Acceptance sampling procedures based on the allocation of priorities principle (APP) — Part 2: Coordinated single sampling plans for acceptance sampling
• ISO 13457:200022026,IS,,ISO 13457:2000,Agricultural irrigation equipment — Water-driven chemical injector pumps,Matériel agricole d'irrigation — Pompes doseuses à moteur hydraulique pour l'injec
• ISO 13457:200843993,IS,,ISO 13457:2008,Agricultural irrigation equipment — Water-driven chemical injector pumps,Matériel agricole d'irrigation — Pompes doseuses à moteur hydraulique pour l'injec
• ISO 13459:199722029,IS,,ISO 13459:1997,Earth-moving machinery — Dumpers — Trainer seat/enclosure,Engins de terrassement — Tombereaux — Enceinte/siège de l'instructeur,1997-04-03,1,['53.100'],ISO
• ISO 13460:199822032,IS,,ISO 13460:1998,Agricultural irrigation equipment — Plastics saddles for polyethylene pressure pipes,Matériel agricole d'irrigation — Selles de dérivation en matière plast
• ISO 13465:199722036,IS,,ISO 13465:1997,Determination of neptunium in nitric acid solutions by molecular absorption spectrophotometry,Détermination du neptunium dans les solutions d'acide nitriqu
• ISO 13465:200944275,IS,,ISO 13465:2009,Nuclear energy — Nuclear fuel technology — Determination of neptunium in nitric acid solutions by spectrophotometry,Énergie nucléaire — Technologie du comb
• ISO 13468-1:199622055,IS,,ISO 13468-1:1996,Plastics — Determination of the total luminous transmittance of transparent materials — Part 1: Single-beam instrument,Plastiques — Détermination du fact
• ISO 13468-2:199922056,IS,,ISO 13468-2:1999,Plastics — Determination of the total luminous transmittance of transparent materials — Part 2: Double-beam instrument,Plastiques — Détermination du fact
• ISO 13472-1:200235387,IS,,ISO 13472-1:2002,Acoustics — Measurement of sound absorption properties of road surfaces in situ — Part 1: Extended surface method,Acoustique — Mesurage in situ des propr
• ISO 13472-2:201032304,IS,,ISO 13472-2:2010,Acoustics — Measurement of sound absorption properties of road surfaces in situ — Part 2: Spot method for reflective surfaces,Acoustique — Mesurage in si
• ISO 13473-1:199725637,IS,,ISO 13473-1:1997,Characterization of pavement texture by use of surface profiles — Part 1: Determination of Mean Profile Depth,Caractérisation de la texture d'un revêteme
• ISO 13473-5:200940280,IS,,ISO 13473-5:2009,Characterization of pavement texture by use of surface profiles — Part 5: Determination of megatexture,Caractérisation de la texture d'un revêtement de c
• ISO 13477:199722076,IS,,ISO 13477:1997,Thermoplastics pipes for the conveyance of fluids — Determination of resistance to rapid crack propagation (RCP) — Small-scale steady-state test (S4 test),
• ISO 13478:199722077,IS,,ISO 13478:1997,Thermoplastics pipes for the conveyance of fluids — Determination of resistance to rapid crack propagation (RCP) — Full-scale test (FST),Tubes en matières
• ISO 13479:199722078,IS,,ISO 13479:1997,Polyolefin pipes for the conveyance of fluids — Determination of resistance to crack propagation — Test method for slow crack growth on notched pipes (notc
• ISO 13479:200945812,IS,,ISO 13479:2009,Polyolefin pipes for the conveyance of fluids — Determination of resistance to crack propagation — Test method for slow crack growth on notched pipes,Tubes
• ISO 13485:199622098,IS,,ISO 13485:1996,Quality systems — Medical devices — Particular requirements for the application of ISO 9001,Systèmes qualité — Dispositifs médicaux — Exigences particulièr
• ISO 13485:200336786,IS,,ISO 13485:2003,Medical devices — Quality management systems — Requirements for regulatory purposes,Dispositifs médicaux — Systèmes de management de la qualité — Exigences
• ISO 13485:2003/Cor 1:200954724,IS,Cor,ISO 13485:2003/Cor 1:2009,Medical devices — Quality management systems — Requirements for regulatory purposes — Technical Corrigendum 1,Dispositifs médicaux — Systèmes
• ISO 13491-1:199819521,IS,,ISO 13491-1:1998,"Banking — Secure cryptographic devices (retail) — Part 1: Concepts, requirements and evaluation methods","Banque — Dispositifs cryptographiques de sécur
• ISO 13491-1:200741214,IS,,ISO 13491-1:2007,"Banking — Secure cryptographic devices (retail) — Part 1: Concepts, requirements and evaluation methods","Banque — Dispositifs cryptographiques de sécur
• ISO 13491-1:201661137,IS,,ISO 13491-1:2016,"Financial services — Secure cryptographic devices (retail) — Part 1: Concepts, requirements and evaluation methods","Services financiers — Dispositifs c
• ISO 13491-2:200028370,IS,,ISO 13491-2:2000,Banking — Secure cryptographic devices (retail) — Part 2: Security compliance checklists for devices used in magnetic stripe card systems,Banque — Dispos
• ISO 13491-2:200539671,IS,,ISO 13491-2:2005,Banking — Secure cryptographic devices (retail) — Part 2: Security compliance checklists for devices used in financial transactions,Banque — Dispositifs
• ISO 13491-2:201661163,IS,,ISO 13491-2:2016,Financial services — Secure cryptographic devices (retail) — Part 2: Security compliance checklists for devices used in financial transactions,Services f
• ISO 13491-2:201772178,IS,,ISO 13491-2:2017,Financial services — Secure cryptographic devices (retail) — Part 2: Security compliance checklists for devices used in financial transactions,Services f
• ISO 13492:199820746,IS,,ISO 13492:1998,Banking — Key management related data element (retail),Banque — Élément de données lié à la gestion des clés (services aux particuliers),1998-05-14,1,['35.
• ISO 13492:200739668,IS,,ISO 13492:2007,Financial services — Key management related data element — Application and usage of ISO 8583 data elements 53 and 96,Services financiers — Élément de donné
• ISO 13493:199821238,IS,,ISO 13493:1998,Meat and meat products — Determination of chloramphenicol content — Method using liquid chromatography,Viande et produits à base de viande — Dosage du chlo
• ISO 13496:200021237,IS,,ISO 13496:2000,Meat and meat products — Detection of colouring agents — Method using thin-layer chromatography,Viande et produits à base de viande — Détection des agents
• ISO 13500:199822132,IS,,ISO 13500:1998,Petroleum and natural gas industries — Drilling fluid materials — Specifications and tests,Industries du pétrole et du gaz naturel — Produits pour fluides
• ISO 13500:200640032,IS,,ISO 13500:2006,Petroleum and natural gas industries — Drilling fluid materials — Specifications and tests,Industries du pétrole et du gaz naturel — Produits pour fluides
• ISO 13501:200541493,IS,,ISO 13501:2005,Petroleum and natural gas industries — Drilling fluids — Processing systems evaluation,Industries du pétrole et du gaz naturel — Fluides de forage — Évalua
• ISO 13503-1:200322135,IS,,ISO 13503-1:2003,Petroleum and natural gas industries — Completion fluids and materials — Part 1: Measurement of viscous properties of completion fluids,Industries du pét
• ISO 13503-1:2003/Cor 1:200543528,IS,Cor,ISO 13503-1:2003/Cor 1:2005,Petroleum and natural gas industries — Completion fluids and materials — Part 1: Measurement of viscous properties of completion fluids — T
• ISO 13503-2:200636976,IS,,ISO 13503-2:2006,Petroleum and natural gas industries — Completion fluids and materials — Part 2: Measurement of properties of proppants used in hydraulic fracturing and
• ISO 13503-2:2006/Amd 1:200944977,IS,Amd,ISO 13503-2:2006/Amd 1:2009,Petroleum and natural gas industries — Completion fluids and materials — Part 2: Measurement of properties of proppants used in hydraulic f
• ISO 13503-3:200539154,IS,,ISO 13503-3:2005,Petroleum and natural gas industries — Completion fluids and materials — Part 3: Testing of heavy brines,Industries du pétrole et du gaz naturel — Fluide
• ISO 13506-1:201763839,IS,,ISO 13506-1:2017,Protective clothing against heat and flame — Part 1: Test method for complete garments — Measurement of transferred energy using an instrumented manikin,
• ISO 13506-2:201763840,IS,,ISO 13506-2:2017,Protective clothing against heat and flame — Part 2: Skin burn injury prediction — Calculation requirements and test cases,Vêtements de protection contre
• ISO 13506:200841154,IS,,ISO 13506:2008,Protective clothing against heat and flame — Test method for complete garments — Prediction of burn injury using an instrumented manikin,Vêtements de prote
• ISO 13517:201353972,IS,,ISO 13517:2013,Metallic powders — Determination of flowrate by means of a calibrated funnel (Gustavsson flowmeter),Poudres métalliques — Détermination du temps d'écouleme
• ISO 13520:200220837,IS,,ISO 13520:2002,Determination of ferrite content in austenitic stainless steel castings,Détermination de la teneur en ferrite dans les pièces moulées en acier inoxydable a
• ISO 13520:201559273,IS,,ISO 13520:2015,Determination of ferrite content in austenitic stainless steel castings,Détermination du taux de ferrite des pièces moulées en acier inoxydable austénitiqu
• ISO 13521:199920836,IS,,ISO 13521:1999,Austenitic manganese steel castings,Pièces moulées en acier austénitique au manganèse,1999-12-16,1,['77.140.80'],ISO/TC 17/SC 11,9599,,[59274],"['en','fr']
• ISO 13521:201559274,IS,,ISO 13521:2015,Austenitic manganese steel castings,Pièces moulées en acier austénitique au manganèse,2015-10-01,2,['77.140.80'],ISO/TC 17/SC 11,9599,[20836],[84908],['en'

← records 14,001–14,400 · All of Withdrawn and superseded ISO standards · records 14,801 on →