Packaging specification equivalence: neck finishes, corrugated grades and pallet standards
Cross-reference of packaging specifications that procurement, packaging engineers and brand owners need when substituting materials, matching closures to bottles, or converting between regional standards. Covers three domains: (1) SPI/GPI plastic and glass neck-finish dimensions with tolerances (T, E, H, S, I) for the 400, 410 and 415 thread series; (2) corrugated board grade equivalence between Mullen burst test and ECT edge crush test ratings, with maximum weight limits from both the Fibre Box Handbook and UPS guidelines; (3) EUR/ISO pallet footprint dimensions, load ratings and regional designations. Answers questions like 'what are the T and E dimensions for a 24-410 finish', 'is 200# Mullen the same as 32 ECT', and 'what size is a EUR 2 pallet'.
Records170
Sources8
Verified
Review by
LicenceFactual compilation with source citations. Neck-finish dimensions are facts about physical measurements transcribed by vendors from GPI/SPI standards; short attributed quotes link back. Corrugated grade data is factual product information published by distributors. Pallet dimensions are widely published facts. No standard text is reproduced.
The data
| Specification ID | Specification type | Equivalence or compatibility note | Chart column headings | Units as the chart states them | T (thread diameter) | E (neck outside diameter) | H (finish height) | S (thread start) | Thread-series column used | T max (mm) | T min (mm) | E max (mm) | E min (mm) | H max (mm) | H min (mm) | S max (mm) | S min (mm) | I min (mm) | Threads per inch | Max. weight per box, Fibre Box Handbook (lbs) | Max. weight per box, UPS guidelines (lbs) | What the burst rating means | What the ECT rating means | Approximate height | Thread style | Typical use | Remarks | Footprint (L × W, mm) | Footprint (L × W, in) | Overall dimensions (L × W × H) | Construction | Weight of the empty pallet | Safe working load | Max. additional load | Loaded weight limit | Description | Length | Width | Height | Boards | Nails | Blocks | Stacking load limit on the bottom pallet | Board construction | Max. weight of box and contents (lbs) | Max. outside dimension (in, L+W+D) | Min. bursting test (lbs/sq. in.) or puncture test (in. oz./in.) | Min. combined weight of facings (lbs/1,000 sq. ft.) | Min. edge crush test (lbs/in. width) | ECT chart column heading |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 18-410 (glass) | neck_finish | 410 thread profile | Size | T (Thread Diameter) | E (Neck OD) | H (Finish Height) | S (Thread Start) | (in inches) | 0.694 ± .010 | 0.610 ± .010 | 0.513 +.013 / -.012 | 0.034 +.013 / -.012 | ||||||||||||||||||||||||||||||||||||||||||
| 20-400 | neck_finish | 1 Thread turn | MM | T | | E | | 400H | | 410H | | 415H | | S | | I | THDS/ IN. | All dimensions in mm and converted from original SPI tables. | 400H | 19.89 | 19.48 | 17.75 | 17.35 | 9.08 | 9.04 | 1.32 | 0.56 | 10.26 | 8 | |||||||||||||||||||||||||||||||||||
| 20-410 | neck_finish | 1.5 Thread turns | MM | T | | E | | 400H | | 410H | | 415H | | S | | I | THDS/ IN. | All dimensions in mm and converted from original SPI tables. | 410H | 19.89 | 19.48 | 17.75 | 17.35 | 14.45 | 13.69 | 1.32 | 0.56 | 10.26 | 8 | |||||||||||||||||||||||||||||||||||
| 20-410 (glass) | neck_finish | 410 thread profile | Size | T (Thread Diameter) | E (Neck OD) | H (Finish Height) | S (Thread Start) | (in inches) | 0.773 ± .010 | 0.689 ± .010 | 0.544 +.013 / -.012 | 0.034 +.013 / -.012 | ||||||||||||||||||||||||||||||||||||||||||
| 20-415 | neck_finish | 2 Thread turns | MM | T | | E | | 400H | | 410H | | 415H | | S | | I | THDS/ IN. | All dimensions in mm and converted from original SPI tables. | 415H | 19.89 | 19.48 | 17.75 | 17.35 | 19.23 | 18.46 | 1.32 | 0.56 | 10.26 | 8 | |||||||||||||||||||||||||||||||||||
| 22-410 (glass) | neck_finish | 410 thread profile | Size | T (Thread Diameter) | E (Neck OD) | H (Finish Height) | S (Thread Start) | (in inches) | 0.852 ± .010 | 0.768 ± .010 | 0.575 +.013 / -.012 | 0.034 +.013 / -.012 | ||||||||||||||||||||||||||||||||||||||||||
| 24-400 | neck_finish | 1 Thread turn | MM | T | | E | | 400H | | 410H | | 415H | | S | | I | THDS/ IN. | All dimensions in mm and converted from original SPI tables. | 400H | 23.87 | 23.47 | 21.74 | 21.34 | 10.54 | 9.78 | 1.55 | 0.79 | 13.10 | 8 | |||||||||||||||||||||||||||||||||||
| 24-410 | neck_finish | 1.5 Thread turns | MM | T | | E | | 400H | | 410H | | 415H | | S | | I | THDS/ IN. | All dimensions in mm and converted from original SPI tables. | 410H | 23.87 | 23.47 | 21.74 | 21.34 | 16.79 | 16.03 | 1.55 | 0.79 | 13.10 | 8 | |||||||||||||||||||||||||||||||||||
| 24-410 (glass) | neck_finish | 410 thread profile | Size | T (Thread Diameter) | E (Neck OD) | H (Finish Height) | S (Thread Start) | (in inches) | 0.930 ± .010 | 0.846 ± .010 | 0.636 +.013 / -.012 | 0.046 +.016 / -.015 | ||||||||||||||||||||||||||||||||||||||||||
| 24-415 | neck_finish | 2 Thread turns | MM | T | | E | | 400H | | 410H | | 415H | | S | | I | THDS/ IN. | All dimensions in mm and converted from original SPI tables. | 415H | 23.87 | 23.47 | 21.74 | 21.34 | 24.69 | 23.93 | 1.55 | 0.79 | 13.10 | 8 | |||||||||||||||||||||||||||||||||||
| 28-400 | neck_finish | 1 Thread turn | MM | T | | E | | 400H | | 410H | | 415H | | S | | I | THDS/ IN. | All dimensions in mm and converted from original SPI tables. | 400H | 27.64 | 27.12 | 25.25 | 24.74 | 10.47 | 9.78 | 1.55 | 0.79 | 15.60 | 6 | |||||||||||||||||||||||||||||||||||
| 28-410 | neck_finish | 1.5 Thread turns | MM | T | | E | | 400H | | 410H | | 415H | | S | | I | THDS/ IN. | All dimensions in mm and converted from original SPI tables. | 410H | 27.64 | 27.12 | 25.25 | 24.74 | 18.36 | 17.06 | 1.55 | 0.79 | 15.60 | 6 | |||||||||||||||||||||||||||||||||||
| 28-410 (glass) | neck_finish | 410 thread profile | Size | T (Thread Diameter) | E (Neck OD) | H (Finish Height) | S (Thread Start) | (in inches) | 1.076 +.012 / -.013 | 0.982 +.012 / -.013 | 0.698 +.013 / -.012 | 0.046 +.016 / -.015 | ||||||||||||||||||||||||||||||||||||||||||
| 28-415 | neck_finish | 2 Thread turns | MM | T | | E | | 400H | | 410H | | 415H | | S | | I | THDS/ IN. | All dimensions in mm and converted from original SPI tables. | 415H | 27.64 | 27.12 | 25.25 | 24.74 | 27.86 | 27.10 | 1.55 | 0.79 | 15.60 | 6 | |||||||||||||||||||||||||||||||||||
| 32 ECT Single Wall | corrugated_board | BOX STRENGTH GUIDELINES: (Maximum weight per box) | FIBRE BOX HANDBOOK | UPS GUIDELINES | 65 lbs | 30 lbs | 200# test boxes withstand 200 lbs/sq.in. of side wall pressure before bursting. | 32 ECT boxes withstand 32 lbs/linear inch of stacking weight before crushing. | ||||||||||||||||||||||||||||||||||||||||||||
| 33-400 | neck_finish | 1 Thread turn | MM | T | | E | | 400H | | 410H | | 415H | | S | | I | THDS/ IN. | All dimensions in mm and converted from original SPI tables. | 400H | 32.14 | 31.52 | 29.74 | 29.14 | 10.62 | 9.86 | 1.55 | 0.79 | 20.10 | 6 | |||||||||||||||||||||||||||||||||||
| 33-415 | neck_finish | 2 Thread turns | MM | T | | E | | 400H | | 410H | | 415H | | S | | I | THDS/ IN. | All dimensions in mm and converted from original SPI tables. | 415H | 32.14 | 31.52 | 29.74 | 29.14 | 33.00 | 32.00 | 1.55 | 0.79 | 20.10 | 6 | |||||||||||||||||||||||||||||||||||
| 38-400 | neck_finish | 1 Thread turn | MM | T | | E | | 400H | | 410H | | 415H | | S | | I | THDS/ IN. | All dimensions in mm and converted from original SPI tables. | 400H | 37.50 | 36.88 | 35.10 | 34.50 | 10.62 | 9.86 | 1.55 | 0.79 | 17.45 | 6 | |||||||||||||||||||||||||||||||||||
| 40-400 | neck_finish | 1 Thread turn | MM | T | | E | | 400H | | 410H | | 415H | | S | | I | THDS/ IN. | All dimensions in mm and converted from original SPI tables. | 400H | 40.13 | 39.37 | 37.75 | 36.00 | 10.62 | 9.86 | 1.55 | 0.79 | 27.70 | 6 | |||||||||||||||||||||||||||||||||||
| 43-400 | neck_finish | 1 Thread turn | MM | T | | E | | 400H | | 410H | | 415H | | S | | I | THDS/ IN. | All dimensions in mm and converted from original SPI tables. | 400H | 42.00 | 41.25 | 39.62 | 38.86 | 10.62 | 9.86 | 1.55 | 0.79 | 29.60 | 6 | |||||||||||||||||||||||||||||||||||
| 48-400 | neck_finish | 1 Thread turn | MM | T | | E | | 400H | | 410H | | 415H | | S | | I | THDS/ IN. | All dimensions in mm and converted from original SPI tables. | 400H | 47.50 | 46.74 | 45.11 | 44.35 | 10.62 | 9.86 | 1.55 | 0.79 | 35.10 | 6 | |||||||||||||||||||||||||||||||||||
| 51-400 | neck_finish | 1 Thread turn | MM | T | | E | | 400H | | 410H | | 415H | | S | | I | THDS/ IN. | All dimensions in mm and converted from original SPI tables. | 400H | 50.00 | 49.10 | 47.60 | 46.71 | 10.75 | 10.00 | 1.55 | 0.79 | 37.60 | 6 | |||||||||||||||||||||||||||||||||||
| 53-400 | neck_finish | 1 Thread turn | MM | T | | E | | 400H | | 410H | | 415H | | S | | I | THDS/ IN. | All dimensions in mm and converted from original SPI tables. | 400H | 52.50 | 51.61 | 50.11 | 49.23 | 10.75 | 10.00 | 1.55 | 0.79 | 40.10 | 6 | |||||||||||||||||||||||||||||||||||
| 58-400 | neck_finish | 1 Thread turn | MM | T | | E | | 400H | | 410H | | 415H | | S | | I | THDS/ IN. | All dimensions in mm and converted from original SPI tables. | 400H | 56.50 | 55.60 | 54.10 | 53.22 | 10.75 | 10.00 | 1.55 | 0.79 | 44.10 | 6 | |||||||||||||||||||||||||||||||||||
| 60-400 | neck_finish | 1 Thread turn | MM | T | | E | | 400H | | 410H | | 415H | | S | | I | THDS/ IN. | All dimensions in mm and converted from original SPI tables. | 400H | 59.50 | 58.60 | 57.10 | 56.21 | 10.75 | 10.00 | 1.55 | 0.79 | 47.00 | 6 | |||||||||||||||||||||||||||||||||||
| 63-400 | neck_finish | 1 Thread turn | MM | T | | E | | 400H | | 410H | | 415H | | S | | I | THDS/ IN. | All dimensions in mm and converted from original SPI tables. | 400H | 62.51 | 61.62 | 60.12 | 59.23 | 10.75 | 10.00 | 1.55 | 0.79 | 50.00 | 6 | |||||||||||||||||||||||||||||||||||
| 70-400 | neck_finish | 1 Thread turn | MM | T | | E | | 400H | | 410H | | 415H | | S | | I | THDS/ IN. | All dimensions in mm and converted from original SPI tables. | 400H | 69.50 | 68.60 | 67.00 | 66.22 | 10.75 | 10.00 | 1.55 | 0.79 | 57.00 | 6 | |||||||||||||||||||||||||||||||||||
| 75-400 | neck_finish | 1 Thread turn | MM | T | | E | | 400H | | 410H | | 415H | | S | | I | THDS/ IN. | All dimensions in mm and converted from original SPI tables. | 400H | 74.00 | 73.10 | 71.60 | 70.71 | 10.75 | 10.00 | 1.55 | 0.79 | 61.50 | 6 | |||||||||||||||||||||||||||||||||||
| 77-400 | neck_finish | 1 Thread turn | MM | T | | E | | 400H | | 410H | | 415H | | S | | I | THDS/ IN. | All dimensions in mm and converted from original SPI tables. | 400H | 77.10 | 76.20 | 74.70 | 73.81 | 12.75 | 12.00 | 1.90 | 1.14 | 64.70 | 6 | |||||||||||||||||||||||||||||||||||
| 83-400 | neck_finish | 1 Thread turn | MM | T | | E | | 400H | | 410H | | 415H | | S | | I | THDS/ IN. | All dimensions in mm and converted from original SPI tables. | 400H | 83.00 | 82.12 | 80.00 | 79.07 | 12.75 | 12.00 | 1.90 | 1.14 | 70.00 | 5 | |||||||||||||||||||||||||||||||||||
| 89-400 | neck_finish | 1 Thread turn | MM | T | | E | | 400H | | 410H | | 415H | | S | | I | THDS/ IN. | All dimensions in mm and converted from original SPI tables. | 400H | 89.18 | 88.30 | 86.12 | 85.24 | 14.00 | 13.20 | 1.90 | 1.14 | 74.10 | 5 | |||||||||||||||||||||||||||||||||||
| 100-400 | neck_finish | 1 Thread turn | MM | T | | E | | 400H | | 410H | | 415H | | S | | I | THDS/ IN. | All dimensions in mm and converted from original SPI tables. | 400H | 100.0 | 99.10 | 96.95 | 96.00 | 15.55 | 14.80 | 1.90 | 1.14 | 85.00 | 5 | |||||||||||||||||||||||||||||||||||
| 110-400 | neck_finish | 1 Thread turn | MM | T | | E | | 400H | | 410H | | 415H | | S | | I | THDS/ IN. | All dimensions in mm and converted from original SPI tables. | 400H | 110.0 | 109.1 | 107.0 | 106.0 | 15.55 | 14.80 | 1.90 | 1.14 | 95.00 | 5 | |||||||||||||||||||||||||||||||||||
| 120-400 | neck_finish | 1 Thread turn | MM | T | | E | | 400H | | 410H | | 415H | | S | | I | THDS/ IN. | All dimensions in mm and converted from original SPI tables. | 400H | 120.0 | 119.1 | 117.0 | 116.0 | 17.80 | 17.00 | 1.90 | 1.14 | 105.0 | 5 | |||||||||||||||||||||||||||||||||||
| 200# Double Wall | corrugated_board | BOX STRENGTH GUIDELINES: (Maximum weight per box) | FIBRE BOX HANDBOOK | UPS GUIDELINES | 80 lbs | 60 lbs | 200# test boxes withstand 200 lbs/sq.in. of side wall pressure before bursting. | 32 ECT boxes withstand 32 lbs/linear inch of stacking weight before crushing. | ||||||||||||||||||||||||||||||||||||||||||||
| 200# Single Wall | corrugated_board | BOX STRENGTH GUIDELINES: (Maximum weight per box) | FIBRE BOX HANDBOOK | UPS GUIDELINES | 65 lbs | 40 lbs | 200# test boxes withstand 200 lbs/sq.in. of side wall pressure before bursting. | 32 ECT boxes withstand 32 lbs/linear inch of stacking weight before crushing. | ||||||||||||||||||||||||||||||||||||||||||||
| 275# Double Wall | corrugated_board | BOX STRENGTH GUIDELINES: (Maximum weight per box) | FIBRE BOX HANDBOOK | UPS GUIDELINES | 100 lbs | 80 lbs | 200# test boxes withstand 200 lbs/sq.in. of side wall pressure before bursting. | 32 ECT boxes withstand 32 lbs/linear inch of stacking weight before crushing. | ||||||||||||||||||||||||||||||||||||||||||||
| 275# Single Wall | corrugated_board | BOX STRENGTH GUIDELINES: (Maximum weight per box) | FIBRE BOX HANDBOOK | UPS GUIDELINES | 95 lbs | 65 lbs | 200# test boxes withstand 200 lbs/sq.in. of side wall pressure before bursting. | 32 ECT boxes withstand 32 lbs/linear inch of stacking weight before crushing. | ||||||||||||||||||||||||||||||||||||||||||||
| 350# Double Wall | corrugated_board | BOX STRENGTH GUIDELINES: (Maximum weight per box) | FIBRE BOX HANDBOOK | UPS GUIDELINES | 120 lbs | 100 lbs | 200# test boxes withstand 200 lbs/sq.in. of side wall pressure before bursting. | 32 ECT boxes withstand 32 lbs/linear inch of stacking weight before crushing. | ||||||||||||||||||||||||||||||||||||||||||||
| 350# Single Wall | corrugated_board | BOX STRENGTH GUIDELINES: (Maximum weight per box) | FIBRE BOX HANDBOOK | UPS GUIDELINES | 120 lbs | 80 lbs | 200# test boxes withstand 200 lbs/sq.in. of side wall pressure before bursting. | 32 ECT boxes withstand 32 lbs/linear inch of stacking weight before crushing. | ||||||||||||||||||||||||||||||||||||||||||||
| 400 series | neck_finish | Finish Code | Approx. Height | Thread Style | Typical Use | Remarks | Short (standard) | Single-turn continuous thread | General-purpose screw caps | Most common finish for food, beverage, and personal care bottles. | ||||||||||||||||||||||||||||||||||||||||||||
| 410 series | neck_finish | Finish Code | Approx. Height | Thread Style | Typical Use | Remarks | Medium height | Fine thread with slightly taller finish | Dispensing closures, pumps, and flip-tops | Allows more secure engagement and improved sealing torque. | ||||||||||||||||||||||||||||||||||||||||||||
| 415 series | neck_finish | Finish Code | Approx. Height | Thread Style | Typical Use | Remarks | Tall finish | Extended thread height | Fine-mist sprayers, droppers | Provides additional room for actuator components. | ||||||||||||||||||||||||||||||||||||||||||||
| 425 series | neck_finish | Finish Code | Approx. Height | Thread Style | Typical Use | Remarks | Extra tall | Multi-thread or custom sealing bead | Pharmaceutical and laboratory bottles | Designed for precision applications needing higher neck engagement. | ||||||||||||||||||||||||||||||||||||||||||||
| 439/440 series | neck_finish | Finish Code | Approx. Height | Thread Style | Typical Use | Remarks | Deep-thread, heavy-duty | Coarse thread or modified CT | Industrial containers, thick liquids | Ensures robust sealing and durability for repeated use. | ||||||||||||||||||||||||||||||||||||||||||||
| 500# Double Wall | corrugated_board | BOX STRENGTH GUIDELINES: (Maximum weight per box) | FIBRE BOX HANDBOOK | UPS GUIDELINES | 160 lbs | 140 lbs | 200# test boxes withstand 200 lbs/sq.in. of side wall pressure before bursting. | 32 ECT boxes withstand 32 lbs/linear inch of stacking weight before crushing. | ||||||||||||||||||||||||||||||||||||||||||||
| EUR 1 | pallet | ISO1, same size as EUR | EUR-pallet type | Dimensions (L × W) | ISO pallet alternative | 800 mm × 1,200 mm | 31.50 in × 47.24 in | 800 mm × 1,200 mm × 144 mm (31.5 in × 47.2 in × 5.7 in) | a four-way pallet made of wood that is nailed with 78 special nails in a prescribed pattern | approximately 25 kg | 1,500 kg | up to 4,000 kg when stacking | up to 1,500 kg (3,300 lb) when equally loaded, otherwise, the limit is 1,000 kg (2,200 lb) | |||||||||||||||||||||||||||||||||||||||
| EUR 1 (specifications) | pallet | approx. 25 kg | 1,500 kg | The most widely-used exchange pallet in the world. It is mainly used in Europe. | 800 mm | 1,200 mm | 144 mm | 11 | 78 | 9 | max. 5.500 kg | |||||||||||||||||||||||||||||||||||||||
| EUR 2 | pallet | ISO2 | EUR-pallet type | Dimensions (L × W) | ISO pallet alternative | 1,200 mm × 1,000 mm | 47.24 in × 39.37 in | |||||||||||||||||||||||||||||||||||||||||||||
| EUR 3 | pallet | EUR-pallet type | Dimensions (L × W) | ISO pallet alternative | 1,000 mm × 1,200 mm | 39.37 in × 47.24 in | ||||||||||||||||||||||||||||||||||||||||||||||
| EUR 6 | pallet | ISO0, half the size of EUR | EUR-pallet type | Dimensions (L × W) | ISO pallet alternative | 800 mm × 600 mm | 31.50 in × 23.62 in | |||||||||||||||||||||||||||||||||||||||||||||
| GME12.01 - Glass finishes for snap-on pourer closures (so-called Verplast finishes) | neck_finish | This data sheet specifies the dimensions of the glass finish for pouring clip-on cap finish (so-called Verplast » of diameter 29 and 32 for still liquids, e.g.; oils, cordials, sauces, vinegar, …). The following finishes are detailed in this data sheet: "Verplast" ... | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME12.10 - Finish for swing stopper | neck_finish | This data sheet applies to punched neck finishes which have been developed preferably for packaging made of glass and which are provided with a swing stopper. | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME13.07 - Comparison of glass finishes for sparkling wines and other carbonated beverages | neck_finish | This data sheet gives an overview of the main available glass finishes available for sparkling wines and other carbonated beverages with a stopper made of cork or synthetic material, generally maintained in place with a wire cage, with or without the possibility of alternatively receiving a ... | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME13.01 - 26H180 Crown finish | neck_finish | Specifications and dimensions of the 26 mm tall crown finish for glass bottles containing beverages. | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME13.02 - 26H126 Crown finish | neck_finish | Specifications and dimensions of the 26 mm shallow crown finish for glass bottles containing beverages. | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME13.04 - 29mm sparkling wine finish | neck_finish | This data sheet gives dimensions and specifications of the 29 mm glass finish for bottles intended for sparkling wine produced by a closed tank method. This finish is designed to take a natural cork or synthetic cork stopper. | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME13.05 - 29mm Spumante crown finish | neck_finish | This data sheet gives dimensions and specifications of the 29 mm crown finish for glass bottles intended for Spumante-type sparkling wines. This finish is designed to take a crown closure or a cork closure in natural cork or synthetic material. | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME13.06 - 29mm cider crown finish | neck_finish | This data sheet gives dimensions and specifications of the 29 mm crown finish for glass bottles intended for cider. This finish is designed to take a crown closure or a cork closure in natural cork or synthetic material. | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME13.08 - Traditional method sparkling wine finishes (26, 29 and 36 mm) | neck_finish | This data sheet gives dimensions and specifications of the glass finishes for bottles intended for sparkling wine produced by the “Traditional method”, with a diameter of 26, 29 or 36 mm. The finish is to receive a crown cap and a cork stopper. The dimensions of the 26- and 29-mm ... | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME13.10 - 26H126 and 26H180 crown finishes - Dimensions - alternative P point | neck_finish | This data sheet provides specifications and dimensions of the crown finishes for glass bottles with an alternative "P" point. 26 H 126 mm shallow 26 H 180 mm tall This "P" point is smoother than in the original designs (ISO 12821 - GLASS ... | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME13.11 - 26H180 crown finish - Dimensions - alternative 'P' point | neck_finish | This data sheet provides specifications and dimensions of the 26 H 180 mm tall crown finish for glass bottles with a modified P point. This point is smoother than in the previous finish, in order to reduce risks of breakage. The filler must pay particular attention to the material of the crown ... | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME13.12 - 26H126 crown finish - Dimensions - alternative 'P' point | neck_finish | This data sheet provides specifications and dimensions of the 26H126 mm shallow crown finish for glass bottles with a modified 'P' point. | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME14.00 - 26H126 & 26H180 twist crown finishes - Dimensions | neck_finish | This data sheet specifies the dimensions of the twist crown finishes for glass bottles. 26 H 126 mm shallow 26 H 180 mm tall The twist crown finishes are designed to use an adapted metal crown cap (see e.g. EN 17177 - GLASS PACKAGING - CROWN CAP - 26 mm DIAMETER, 6 mm HEIGHT ... | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME14.01 - 26H180 twist crown finish | neck_finish | Specifications and dimensions of the 26 mm tall twist crown finish for glass bottles containing beverages. | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME14.02 - 26H126 twist crown finish | neck_finish | Specifications and dimensions of the 26 mm shallow twist crown finish for glass bottles containing beverages. | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME14.11 - 26H180 twist crown finish - Reduced bore | neck_finish | This data sheet provides specifications and dimensions of the 26 H 180 mm tall twist crown finish for glass bottles with a bore reduced from 19,8 mm ±0,3 mm to 19,1 mm ±0,3 mm. This finish with reduced bore should be used with prior mutual agreement ... | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME14.12 - 26 h 126 twist crown finish - Reduced bore | neck_finish | This data sheet provides specifications and dimensions of the 26 H 126 mm shallow twist crown finish for glass bottles with a bore reduced from 19,8 mm ±0,3 mm to 19,1 mm ±0,3 mm. This finish with reduced bore should be used with prior mutual ... | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME20.00.10 - Vacuum lug finish ø 27 regular | neck_finish | This data sheet specifies the dimensions of a vacuum lug finish with a nominal size of 27 mm medium for wide-mouth glass containers. | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME20.00.20 - Vacuum lug finish ø 30 and ø 33 medium | neck_finish | This data sheet specifies the dimensions of a vacuum lug finish with a nominal size of 30 et 33 mm medium for wide-mouth glass containers. | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME20.00 - Vacuum lug finish ø 33 medium | neck_finish | This data sheet specifies the dimensions of a vacuum lug finish with a nominal size of 33 mm medium for wide-mouth glass containers. | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME20.01 - Vacuum lug finish Ø 27 and Ø 38 regular | neck_finish | This data sheet specifies the dimensions of a vacuum lug finish with a nominal size of 38 mm regular for wide-mouth glass containers. | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME20.02.10 - Vacuum lug finish ø 38 medium | neck_finish | This data sheet specifies the dimensions of a vacuum lug finish with a nominal size of 38 mm medium for wide-mouth glass containers. | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME20.02 - Vacuum lug finish Ø 38 medium | neck_finish | This data sheet specifies the dimensions of a vacuum lug finish with a nominal size of 38 mm medium for wide-mouth glass containers. | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME20.03 - Vacuum lug finish Ø 43 and Ø 48 regular | neck_finish | This data sheet specifies the dimensions of vacuum lug finishes with a nominal size of 43 mm and 48 mm regular for wide-mouth glass containers. | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME20.04 - Vacuum lug finish ø 53 and ø 58 regular | neck_finish | This document specifies the dimensions of vacuum lug finishes with nominal sizes of 53 mm and 58 mm regular for wide-mouth glass containers. | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME20.05 - Vacuum lug finish Ø 58 deep | neck_finish | This document specifies the dimensions of a vacuum lug finish with a nominal size of 58 mm deep for wide-mouth glass containers. | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME20.06 - Vacuum lug finish ø 63, ø 66 ø 70 regular | neck_finish | This document specifies the dimensions of vacuum lug finishes with nominal sizes of 63, 66 and 70 mm regular for wide-mouth glass containers. | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME20.07 - Vacuum lug finish ø 63, ø 66 ø 70 deep | neck_finish | This document specifies the dimensions of vacuum lug finishes with nominal sizes of 63, 66 and 70 mm deep for wide-mouth glass containers. | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME20.08 - Vacuum lug finish Ø 77 regular | neck_finish | This document specifies the dimensions of a vacuum lug finish with a nominal size of 77 mm regular for wide-mouth glass containers. | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME20.09 - Vacuum lug finish Ø 82 regular | neck_finish | This document specifies the dimensions of a vacuum lug finish with a nominal size of 82 mm regular for wide-mouth glass containers. | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME20.10 - Vacuum lug finish Ø 89 regular | neck_finish | This document specifies the dimensions of a vacuum lug finish with a nominal size of 89 mm regular for wide-mouth glass containers. | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME20.11 - Vacuum lug finish Ø 100 regular | neck_finish | This document specifies the dimensions of a vacuum lug finish with a nominal size of 100 mm regular for wide-mouth glass containers. | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME20.12 - Vacuum lug finish Ø 110 regular | neck_finish | This document specifies the dimensions of a vacuum lug finish with a nominal size of 110 mm regular for wide-mouth glass containers. | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME21.00 - Glass neck finish - Continuous thread - ø 43 to 90 mm | neck_finish | This range of neck finishes with sizes from 43 to 90 mm have one continuous thread and are designed to fit with plastic (mainly) caps. These relatively high finishes are particularly well adapted to dry coffee content. This document is based on the British Glass GF316 data sheet. | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME21.10 - Flavlock finishes ø 26 to 38 mm | neck_finish | This range of Flavlock neck finishes with sizes from 26 to 38 are intended as RO (Roll-On) finishes with metallic caps. The D-shaped thread run-off into the transfer bead. The deep start of the thread (S) ensures a good 'top and side' sealing. Caps have a generous level of sealing ... | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME25.01 - Press-on vacuum seal finish ø 51 ø 63 ø 70 | neck_finish | This is a vacuum top and side seal finish. | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME30.06 - BVP screw finishes for non carbonated products | neck_finish | Specifications and dimensions of a series of screw finishes for the closure of beverages and other non-carbonated products. Finishes designed to take a tamper-evident closure which needs to be snapped before it can be opened, commonly known as a rolled on Pilferproof closure. The ... | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME30.10 - Bore specifications for inserts for 30, 31,5 and 35 size BVP finishes | neck_finish | This data sheet gives the specifications for bore dimensions and profile for BVP finishes according to EN 15543 - GLASS PACKAGING. FINISHES FOR BOTTLES. SCREW THREAD FINISHES FOR BOTTLES FOR NON-CARBONATED LIQUIDS for 30, 31,5 and 35, standard, deep and extra deep versions, to accept pourers or ... | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME30.11 - Finish ALSECO-ALCOA 28mm | neck_finish | This data sheet specifies the dimensions of the 28-millimetre ALSECO-ALCOA screw finish for glass containers. This finish is very close to the MCA series (See GME 32.00 - MCA FINISHES). | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME30.12 - GL finish | neck_finish | This document specifies the dimensions of GL glass container knuckle thread finishes. It applies to finishes with external screw thread, which have been developed preferably for glass packaging and are used primarily for medical or cosmetic products. | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME30.13 - Deep BVS finishes for still wines | neck_finish | Specifications and dimensions of a series of deep screw glass finishes for the closure of wines with a CO2 content below 1.2 g/l. Note: Carbonation ≥ 1,2g/l in CO2 requires an appropriate bottle and an adapted capping method agreed between the glass maker, the cap supplier and the filler. | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME30.14 - 2-start thread pilfer-proof finishes | neck_finish | This document specifies the dimensions of pilfer-proof finishes with a two-start thread, particularly dedicated to sweet liquids (liquors, etc…). The 3 sizes (28H44, 30H60, 31,5H60) are compatible with caps made for standard BVP finishes according to EN 15543 - GLASS PACKAGING. FINISHES ... | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME30.15 - BVP and BVS minimum through bore | neck_finish | This data sheet specifies the values of the minimum through bore for BVP and BVS finishes. Users of bottles need to know the minimum through bore diameter to choose the filling tube; it was therefore useful to harmonise this dimension for each finish size. | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME30.21 - PET finish 30/25H (18.5) | neck_finish | Specifications and dimensions of the 30 mm tall screw finish with three (3) thread starts for flat waters and non carbonated beverages. This finish can be used for aseptic filling and filling with introduction of nitrogen. The dimension (18.5) is the height in millimetres from the top of finish ... | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME30.22 - PET finish 30/25-16.8-3/9 | neck_finish | Specifications and dimensions of the 30 mm low neck screw finish with three (3) thread starts for flat waters and non carbonated beverages. This finish can be used for aseptic filling and filling with introduction of nitrogen. The dimension (16.8) is the height in millimetres from the top of ... | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME30.23 - PET finish 26.7/21.8-17-3/6.35 | neck_finish | Specifications and dimensions of the 26.7 mm screw finish with three (3) thread starts and a 17.07 mm height for flat waters and non carbonated beverages. This finish can be used for aseptic filling and filling with introduction of nitrogen. This finish is designed to take a tamper evident ... | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME30.24 - PET finish 26.7/21.7-16.8-3/3 | neck_finish | Specifications and dimensions of the 26.7 mm screw finish with three (3) thread starts and a 16.80 mm height for flat waters and non carbonated beverages. This finish can be used for aseptic filling and filling with introduction of nitrogen. This finish is designed to take a tamper evident ... | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME30.25 - PET finish 38/33-16,5-3/3 | neck_finish | This document provides specifications and dimensions of the 38 mm screw finish with three (3) thread starts and a 16,50 mm height for still waters and non-carbonated beverages. This finish can be used for aseptic filling and filling with introduction of nitrogen (1 bar max). This finish is ... | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME30.26 - PET finish 29/25-12,6-3/2,17 | neck_finish | Specifications and dimensions of the 29 mm screw finish with three (3) thread starts for flat waters and non carbonated beverages. This finish can be used for aseptic filling and filling with introduction of nitrogen. The dimension (12.6) is the height in millimetres from the top of finish to ... | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME30.27 - PET finish 28.3/22.5-59.5-1/3.6 | neck_finish | Specifications and dimensions of the screw PET finish BVS 30H60 for the closure of wines with CO2 content below 1.2 grams per litre. This finish is designed to take : An aluminium tamper-evident closure with an extended skirt which is reformed during application; A screw plastic ... | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME30.28 - PET finish 26/22-12-3/6.5 | neck_finish | Specifications and dimensions of the 26 mm screw finish with three (3) thread starts for flat waters and non-carbonated beverages. This finish can be used for water with or without the introduction of nitrogen (internal Overpressure should not exceed 1 bar). The dimension (12.0) ... | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME30.29 - PET finish 37/32-17,5-2/3,63 | neck_finish | Specifications and dimensions of the 38 mm screw finish with two (2) thread starts and a 17.55 mm height for flat waters and non carbonated beverages. This finish can be used for aseptic filling and filling with introduction of nitrogen (the internal overpressure should not exceed 1 bar). This ... | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME30.31 - PET finish 32/26-15,8-2/2,7-(HF) | neck_finish | This document provides specifications and dimensions of the 32 mm amorphous screw finish with two (2) thread starts for still waters and non-carbonated beverages (the internal pressure should not exceed 1 bar). This finish can be used for hot filling (HF) with a maximum temperature up to ... | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME30.32 - PET finish 26/21-8.5 for edible oil | neck_finish | This document provides specifications and dimensions of the 26 mm finish designed for a snap-on plastic closure for non-carbonated products like edible oils, vinegar and sauces, cold filled (e.g. ambient temperature) with or without introduction of nitrogen (the internal pressure should not ... | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME30.33 - PET finish 29/21-10.5 for edible oil | neck_finish | This document provides specifications and dimensions of the 29 mm snap-on finish for non-carbonated products like alimentary oils, vinegar and sauces, cold filled (ambient temperature) with or without introduction of nitrogen (the internal pressure should not exceed 1 bar). This finish is ... | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME30.34 - BVP PCO PET finish 21,4/16,7-29-1/2,5 | neck_finish | This data sheet provides specifications and dimensions of the BVS PCO 22H30 PET screw finish for wines with a maximum internal pressure of 1 bar. This finish is designed to take a plastic tamper evident closure, which is applied by screwing. | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME30.35 - BVS MCO PET bague 21,4/16-29-1/2,5 | neck_finish | This data sheet provides specifications and dimensions of the BVP MCO 22H30 PET screw finish for wines with a maximum internal pressure of 1 bar. This finish is designed to take an aluminium tamper-evident closure, which is crimped during application. The use of aluminium closure with the use ... | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME30.36 - PET finish 32/27-14.9-2/2,7 | neck_finish | This document provides specifications and dimensions of the 32 mm screw finish with two (2) thread starts for still waters and non-carbonated beverages. This finish can be used for aseptic filling and filling with introduction of nitrogen (the internal pressure should not exceed 1 bar). This ... | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME30.37 - PET finish 26/22-12,9-1/2,17 version 4,2 % vol CO2 | neck_finish | This document provides specifications and requirements of the 26/22 mm screw finish with one (1) thread start for carbonated beverages up to 8,4g CO2/l (4,2 vol % CO2) content and bottles of up to and including 2,0 l litres in capacity. Important note: This replaces previous editions foreseen ... | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME30.38 - PET finish 26/22-12-1/2,5 | neck_finish | This document provides specifications and dimensions of the 26 mm screw finish with one (1) thread start for carbonated beverages up to 7g/l CO2 content and for bottles up to 1,5 litres. The dimension (12,0) is the height in millimetres from the top of the finish to the bottom of the support ... | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME30.39 - PET finish 25/22-9,5-3/1,73 | neck_finish | This document provides specifications and dimensions of the 25 mm screw finish with three (3) thread starts for flat waters and non carbonated beverages in small package sizes with up to 1.5 l volume. This finish can be used for aseptic filling and filling with introduction of nitrogen (internal ... | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME30.40 - PET finish 26/22-15,1-1/2,3 | neck_finish | This data sheet provides specifications and requirements of the 26/22 mm screw finish with one (1) thread start for carbonated beverages, Up to 10,2g CO2/l (5,2 vol CO2) content for bottles of up to and including 2,0 litres in capacity, and up to 8,8g CO2/l (4,5 vol CO2) content and ... | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME30.41 - PET finish 26/22-13,4-1/2,3 | neck_finish | This experimental data sheet provides specifications and requirements of the 26/22 mm screw finish with one (1) thread start for carbonated beverages, Up to 10,2g CO2/l (5,2 vol CO2) content for bottles of up to and including 2,0 litres in capacity, and up to 8,8g CO2/l (4,5 vol CO2) ... | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME30.43 - PET finish 47/41-19,5-3/3,40 | neck_finish | This document provides specifications and dimensions of the 47 mm screw finish with three (3) thread starts for non-carbonated pressurised and non-pressurised beverages. This finish can be used for filling with introduction of nitrogen (internal overpressure should not exceed 1 bar). The ... | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME30.44 - Lightweight PET finish 29/25-12,6-3/2,17 | neck_finish | This document provides specifications and dimensions of the 29 mm lightweight screw finish with three (3) thread starts for flat waters and other non-carbonated beverages. This finish can be used for filling with introduction of nitrogen (internal overpressure should not exceed 1 bar). The ... | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME30.70 - PET snap-on neck finish 26/21-8,5mm | neck_finish | This document provides specifications and dimensions of the 26 mm finish designed for a snap-on plastic closure for non-pressurised and non-carbonated beverages cold-filled (e.g. ambient temperature) without the introduction of nitrogen. This finish is designed for snap-on plastic closure only, ... | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME32.01 - 28mm screw finish for bottles with internal pressure | neck_finish | Specifications and dimensions of the 28 millimetres screw finish for one-way or returnable glass containers with internal pressure designated MCA 3 finish. This document has been superseded by standard EN 17829 - GLASS PACKAGING - 28 MILLIMETRE-SCREW FINISHES (MCA RANGE) - DIMENSIONS. | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME32.02 - 28mm screw finish 7.5 RF universal for bottles with internal pressure | neck_finish | Specifications and dimensions of the 28 mm finish for glass containers for pressurised or vacuum liquids. | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME32.03 - PET PCO finish 27/22-21-1/3,18 | neck_finish | Specifications and dimensions of the single start thread 27,43 mm PET PCO screw finish for the beverage industry. This finish has vent slots and is designed to take a tamper-evident plastic closure only. During first opening, the tamper-evident band will separate from the closure shell and stay ... | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME32.04 - PET PCO finish 28/22-17-1/2.7 | neck_finish | Specifications and dimensions of the single start thread lightweight 28 mm PET PCO screw finish for the beverage industry. This finish has vent slots and is designed to take a tamper-evident plastic closure only. During first opening, the tamper-evident band will separate from the closure shell ... | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME32.05 - MCA 1 finish | neck_finish | Specifications and dimensions of the 28 millimetres screw finish for glass containers designated MCA 1 finish. | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME32.06 - MCA 7.5 R finish | neck_finish | This European Standard specifies the dimensions of the 28 mm screw finish for glass containers designated MCA 7,5 R finish for returnable glass. | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME33.02 - PET neck finish 37/32-13,5/1/4,24-1,5 turns for HPC applications | neck_finish | This document aims to fully specify a PET Neck Finish standard for HPC market with a nominal crest of thread diameter of 37 mm and denominated as 37/32-13,5/1/4,24-1,5 turns (for standard neck finish nomenclature, please refer to DT23.03 - PET FINISHES GLOSSARY AND NOMENCLATURE). It also ... | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME33.03 - PET neck finish 43/37-14,7-1/4,24-1,25 turns for HPC applications | neck_finish | This document aims to fully specify a PET Neck Finish standard for the HPC market with a nominal crest of thread diameter of 43 mm and denominated as 43/37-14,7-1/4,24-1,25 turns (for standard neck finish nomenclature, please refer to DT23.03 - PET FINISHES GLOSSARY AND NOMENCLATURE). It also ... | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME33.04 - PET neck finish 24/18-11,5-1/3,18-1,5 turns for HPC applications | neck_finish | This document aims to fully specify a PET Neck Finish standard for the HPC market with a nominal crest of thread diameter of 23,67 mm and denominated as 24/18-11,5-1/3,18-1,5 turns (for standard neck finish nomenclature, please refer to DT23.03 - PET FINISHES GLOSSARY AND NOMENCLATURE). It also ... | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME33.05 - PET neck finish 20/15-11,5-1/3,18-1,5 turns for HPC applications | neck_finish | This document aims to fully specify a PET Neck Finish standard for the HPC market with a nominal crest of thread diameter of 20mm and denominated as 20/15-11,5-1/3,18-1,5 turns (for standard neck finish nomenclature, please refer to DT23.03 - PET FINISHES GLOSSARY AND NOMENCLATURE). It also ... | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME33.50 - PET snap neck Finish 27/22-6,3 for HPC applications | neck_finish | This document aims to fully specify a PET Neck Finish standard for HPC market with a nominal crest of snap diameter of 27 mm, and denominated as 27/22-6,3 (for standard neck finish nomenclature, please refer to DT23.03 - PET FINISHES GLOSSARY AND NOMENCLATURE). It also explains the dimensions ... | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME40.25 - Flaconnage - Sustainable neck finishes - Interchangeable screw neck with additional bead | neck_finish | This data sheet specifies the dimensions of an interchangeable screw neck finish with additional bead for glass bottles dedicated to perfume and cosmetics. It applies to glass containers with a nominal diameter of the neck finish around 13, 15 or 17 mm This neck finish is part of a range of ... | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME40.30 - Flaconnage - Sustainable neck finishes - Interchangeable crimped finish with additional bead | neck_finish | This data sheet specifies the dimensions of an interchangeable crimped neck finish with additional bead for glass bottles dedicated to perfume and cosmetics. It applies to glass containers with a nominal diameter of the neck finish around 15 or 17 mm This neck finish is part of a range of ... | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME40.02 - Flaconnage - Neck finish for plug pump | neck_finish | Specifications and dimensions of a series of finishes for pump systems with internal fixation on glass bottles. | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME40.03 - Flaconnage - Neck finish for snap-in pump | neck_finish | Specifications and dimensions of a finish for pump systems with internal fixation on glass bottles. See the example of pump references in table 1. | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME40.04 - Flaconnage - Neck finish for crimpless pump | neck_finish | Specifications and dimensions of a series of neck finishes for pump systems with external fixation, without crimping, on glass bottles. This geometry is dedicated to SP7 and SP8 from Silgan. Other crimpless pumps are adapted to standard EN 14854 - GLASS PACKAGING - DIMENSIONS OF NECK FINISHES ... | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME40.05 - Dimensions of the neck finish for glass aerosol containers | neck_finish | This data sheet specifies the dimensions of the neck finish of glass aerosol containers and pumps to ensure complete tightness of valves or pumps with finishes as defined in EN 14849 - AEROSOL CONTAINERS - GLASS CONTAINERS - DIMENSIONS OF AEROSOL VALVE FERRULES. It applies to moulded glass ... | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME40.06 - Stepped FEA finish | neck_finish | This range of FEA glass neck finishes with sizes 18 and 20 are designated for aerosol dispensers. This document was established from the INE BV96037 data sheet. The step of 0,2 mm can be used for protecting the upper part of the plastic coating and integrating it under the crimped ferrule. | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME40.07 - Flaconnage - Glass finish for screw pump - CV finish | neck_finish | This data sheet is based on the INE BV95045 data sheet. It specifies the dimensions of a screw finish for glass flacons for the perfume or cosmetics industry. It applies to glass containers with a nominal diameter of the neck finish around 13, 15, 17, 18 or 20 mm. The designation is "CV ... | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME40.08 - Flaconnage - Neck finish '10,6' for snap-on pump type 'Replica ST' | neck_finish | This document specifies the dimensions of a 10,6-mm neck finish dedicated to a snap-on (crimpless) Replica ST pump from APTAR. ST stands for Seal-Tight. | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME40.09 - Clic finish | neck_finish | This document specifies dimensions for finishes for miniatures | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME40.10 - Flaconnage - Neck finish 11 mm for snap-on (Click-it) SP5-K pump | neck_finish | This document specifies the dimensions of an 11 mm neck finish dedicated to a snap-on (Click-it) 'SP5-K' pump from SILGAN. | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME40.20 - Flaconnage - Sustainable neck finishes - Screw neck without additional bead | neck_finish | This data sheet specifies dimensions of a screw neck finish without additional bead for glass bottles dedicated to perfume and cosmetics. It applies to glass containers with a nominal diameter of the neck finish around 13, 15 or 17 mm This neck finish is part of a range of neck finishes ... | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME50.02 - Glass bottle - Specifications of a neck finish with entry bore diameter 17,5mm | neck_finish | This document sets out the dimensional characteristics of a finish with a narrow entry bore (diameter 17,5 mm) for bottles containing a wine that has a carbonation not exceeding 1,2 g CO2/l with internal sealing. Note: Carbonation over 1,2 g CO2/l requires a suitable container and stopper ... | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME51.00 - Glass bottle - Bartop stopper 27, 29, or 34 mm neck finish, stopper and overcap | neck_finish | This data sheet sets out the dimensional characteristics of the finish of bottles, bartop stopper and overcap, intended for the packaging of alcohols, spirits, liquors and fortified wines and musts. Neck finishes with other external profiles than the one defined in the section 2.1 can also ... | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME305 - Pilferproof finishes for non-pressurised products supplementary series | neck_finish | Dimensions of a series of screw finishes for the closure of beverages and other non-carbonated products. | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME306 - 25 pilferproof finishes for Alpha syrup | neck_finish | Dimensions of the 25 mm pilferproof glass neck finish for Alpha syrups. | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME307 - 28 pilferproof finishes for alpha syrups | neck_finish | Dimensions of the 28 mm pilferproof glass neck finish for Alpha syrups. | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME320 - Pilferproof finish for pressured beverages | neck_finish | See detail GME33.01 - PET neck finish 27/22-13,5/1/4,24-1,5 turns for HPC applications 13/05/2019 - Latest update 22/12/2022 This document aims to fully specify a PET Neck Finish standard for the HPC market with a nominal crest of thread diameter of 27,38 mm, and denominated as 27/22-13,5/1/4,24-1,5 turns (for standard neck finish nomenclature, please refer to DT23.03 - PET FINISHES GLOSSARY AND NOMENCLATURE). It also ... | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME401 - Glass finish at 38mm standard ROPP (7 turns per inch) | neck_finish | This data sheet provides specifications and dimensions for the 38 mm standard ROPP glass finish. | ||||||||||||||||||||||||||||||||||||||||||||||||
| GME402 - Lug finish 20mm for antibiotic and freeze dry glass containers | neck_finish | See detail GME50.01 - Cork mouth finish for corks and capsules 01/04/1992 This data sheet specifies the dimensions of a cork mouth finish for corks and capsules for glass bottles, for wine that has a carbonation pressure not exceeding 2.0 g CO2/l, for use with natural corks. | ||||||||||||||||||||||||||||||||||||||||||||||||
| Item 222 Double Wall 80 lbs | corrugated_board | Max. weight of boxes and content Max. outside dimension Length, Width and Depth added (inches) Min. bursting test, Single wall, Double wall or Solid fiberboard(lbs per sq. in.) Or Min. puncture test, Triple wall board (in. oz. per in. of tear) Min. combined weight of Facing, including Center facings of Double wall and Triple wall board Or Min. combined Weight of plies, Solid Fiberboard, Excluding adhesives (lbs. per 1,000 sq. ft.) | Double Wall Corrugated Fiberboard Boxes | 80 | 85 | 200 | 92 | 42 | Min. Edge Crush Test (ECT) (labs. per in. width) | |||||||||||||||||||||||||||||||||||||||||
| Item 222 Double Wall 100 lbs | corrugated_board | Max. weight of boxes and content Max. outside dimension Length, Width and Depth added (inches) Min. bursting test, Single wall, Double wall or Solid fiberboard(lbs per sq. in.) Or Min. puncture test, Triple wall board (in. oz. per in. of tear) Min. combined weight of Facing, including Center facings of Double wall and Triple wall board Or Min. combined Weight of plies, Solid Fiberboard, Excluding adhesives (lbs. per 1,000 sq. ft.) | Double Wall Corrugated Fiberboard Boxes | 100 | 95 | 275 | 110 | 48 | Min. Edge Crush Test (ECT) (labs. per in. width) | |||||||||||||||||||||||||||||||||||||||||
| Item 222 Double Wall 120 lbs | corrugated_board | Max. weight of boxes and content Max. outside dimension Length, Width and Depth added (inches) Min. bursting test, Single wall, Double wall or Solid fiberboard(lbs per sq. in.) Or Min. puncture test, Triple wall board (in. oz. per in. of tear) Min. combined weight of Facing, including Center facings of Double wall and Triple wall board Or Min. combined Weight of plies, Solid Fiberboard, Excluding adhesives (lbs. per 1,000 sq. ft.) | Double Wall Corrugated Fiberboard Boxes | 120 | 105 | 350 | 126 | 51 | Min. Edge Crush Test (ECT) (labs. per in. width) | |||||||||||||||||||||||||||||||||||||||||
| Item 222 Double Wall 140 lbs | corrugated_board | Max. weight of boxes and content Max. outside dimension Length, Width and Depth added (inches) Min. bursting test, Single wall, Double wall or Solid fiberboard(lbs per sq. in.) Or Min. puncture test, Triple wall board (in. oz. per in. of tear) Min. combined weight of Facing, including Center facings of Double wall and Triple wall board Or Min. combined Weight of plies, Solid Fiberboard, Excluding adhesives (lbs. per 1,000 sq. ft.) | Double Wall Corrugated Fiberboard Boxes | 140 | 110 | 400 | 180 | 61 | Min. Edge Crush Test (ECT) (labs. per in. width) | |||||||||||||||||||||||||||||||||||||||||
| Item 222 Double Wall 160 lbs | corrugated_board | Max. weight of boxes and content Max. outside dimension Length, Width and Depth added (inches) Min. bursting test, Single wall, Double wall or Solid fiberboard(lbs per sq. in.) Or Min. puncture test, Triple wall board (in. oz. per in. of tear) Min. combined weight of Facing, including Center facings of Double wall and Triple wall board Or Min. combined Weight of plies, Solid Fiberboard, Excluding adhesives (lbs. per 1,000 sq. ft.) | Double Wall Corrugated Fiberboard Boxes | 160 | 115 | 500 | 222 | 71 | Min. Edge Crush Test (ECT) (labs. per in. width) | |||||||||||||||||||||||||||||||||||||||||
| Item 222 Double Wall 180 lbs | corrugated_board | Max. weight of boxes and content Max. outside dimension Length, Width and Depth added (inches) Min. bursting test, Single wall, Double wall or Solid fiberboard(lbs per sq. in.) Or Min. puncture test, Triple wall board (in. oz. per in. of tear) Min. combined weight of Facing, including Center facings of Double wall and Triple wall board Or Min. combined Weight of plies, Solid Fiberboard, Excluding adhesives (lbs. per 1,000 sq. ft.) | Double Wall Corrugated Fiberboard Boxes | 180 | 120 | 600 | 270 | 82 | Min. Edge Crush Test (ECT) (labs. per in. width) | |||||||||||||||||||||||||||||||||||||||||
| Item 222 Single Wall 20 lbs | corrugated_board | Max. weight of boxes and content Max. outside dimension Length, Width and Depth added (inches) Min. bursting test, Single wall, Double wall or Solid fiberboard(lbs per sq. in.) Or Min. puncture test, Triple wall board (in. oz. per in. of tear) Min. combined weight of Facing, including Center facings of Double wall and Triple wall board Or Min. combined Weight of plies, Solid Fiberboard, Excluding adhesives (lbs. per 1,000 sq. ft.) | Single Wall Corrugated Fiberboard Boxes | 20 | 40 | 125 | 52 | 23 | Min. Edge Crush Test (ECT) (labs. per in. width) | |||||||||||||||||||||||||||||||||||||||||
| Item 222 Single Wall 35 lbs | corrugated_board | Max. weight of boxes and content Max. outside dimension Length, Width and Depth added (inches) Min. bursting test, Single wall, Double wall or Solid fiberboard(lbs per sq. in.) Or Min. puncture test, Triple wall board (in. oz. per in. of tear) Min. combined weight of Facing, including Center facings of Double wall and Triple wall board Or Min. combined Weight of plies, Solid Fiberboard, Excluding adhesives (lbs. per 1,000 sq. ft.) | Single Wall Corrugated Fiberboard Boxes | 35 | 50 | 150 | 66 | 26 | Min. Edge Crush Test (ECT) (labs. per in. width) | |||||||||||||||||||||||||||||||||||||||||
| Item 222 Single Wall 50 lbs | corrugated_board | Max. weight of boxes and content Max. outside dimension Length, Width and Depth added (inches) Min. bursting test, Single wall, Double wall or Solid fiberboard(lbs per sq. in.) Or Min. puncture test, Triple wall board (in. oz. per in. of tear) Min. combined weight of Facing, including Center facings of Double wall and Triple wall board Or Min. combined Weight of plies, Solid Fiberboard, Excluding adhesives (lbs. per 1,000 sq. ft.) | Single Wall Corrugated Fiberboard Boxes | 50 | 60 | 175 | 75 | 29 | Min. Edge Crush Test (ECT) (labs. per in. width) | |||||||||||||||||||||||||||||||||||||||||
| Item 222 Single Wall 65 lbs | corrugated_board | Max. weight of boxes and content Max. outside dimension Length, Width and Depth added (inches) Min. bursting test, Single wall, Double wall or Solid fiberboard(lbs per sq. in.) Or Min. puncture test, Triple wall board (in. oz. per in. of tear) Min. combined weight of Facing, including Center facings of Double wall and Triple wall board Or Min. combined Weight of plies, Solid Fiberboard, Excluding adhesives (lbs. per 1,000 sq. ft.) | Single Wall Corrugated Fiberboard Boxes | 65 | 75 | 200 | 84 | 32 | Min. Edge Crush Test (ECT) (labs. per in. width) | |||||||||||||||||||||||||||||||||||||||||
| Item 222 Single Wall 80 lbs | corrugated_board | Max. weight of boxes and content Max. outside dimension Length, Width and Depth added (inches) Min. bursting test, Single wall, Double wall or Solid fiberboard(lbs per sq. in.) Or Min. puncture test, Triple wall board (in. oz. per in. of tear) Min. combined weight of Facing, including Center facings of Double wall and Triple wall board Or Min. combined Weight of plies, Solid Fiberboard, Excluding adhesives (lbs. per 1,000 sq. ft.) | Single Wall Corrugated Fiberboard Boxes | 80 | 85 | 250 | 111 | 40 | Min. Edge Crush Test (ECT) (labs. per in. width) | |||||||||||||||||||||||||||||||||||||||||
| Item 222 Single Wall 95 lbs | corrugated_board | Max. weight of boxes and content Max. outside dimension Length, Width and Depth added (inches) Min. bursting test, Single wall, Double wall or Solid fiberboard(lbs per sq. in.) Or Min. puncture test, Triple wall board (in. oz. per in. of tear) Min. combined weight of Facing, including Center facings of Double wall and Triple wall board Or Min. combined Weight of plies, Solid Fiberboard, Excluding adhesives (lbs. per 1,000 sq. ft.) | Single Wall Corrugated Fiberboard Boxes | 95 | 95 | 275 | 138 | 44 | Min. Edge Crush Test (ECT) (labs. per in. width) | |||||||||||||||||||||||||||||||||||||||||
| Item 222 Single Wall 120 lbs | corrugated_board | Max. weight of boxes and content Max. outside dimension Length, Width and Depth added (inches) Min. bursting test, Single wall, Double wall or Solid fiberboard(lbs per sq. in.) Or Min. puncture test, Triple wall board (in. oz. per in. of tear) Min. combined weight of Facing, including Center facings of Double wall and Triple wall board Or Min. combined Weight of plies, Solid Fiberboard, Excluding adhesives (lbs. per 1,000 sq. ft.) | Single Wall Corrugated Fiberboard Boxes | 120 | 105 | 350 | 180 | 55 | Min. Edge Crush Test (ECT) (labs. per in. width) | |||||||||||||||||||||||||||||||||||||||||
| Item 222 Solid Fiberboard 20 lbs | solid_fiberboard | Max. weight of boxes and content Max. outside dimension Length, Width and Depth added (inches) Min. bursting test, Single wall, Double wall or Solid fiberboard(lbs per sq. in.) Or Min. puncture test, Triple wall board (in. oz. per in. of tear) Min. combined weight of Facing, including Center facings of Double wall and Triple wall board Or Min. combined Weight of plies, Solid Fiberboard, Excluding adhesives (lbs. per 1,000 sq. ft.) | Solid Fiberboard Boxes | 20 | 40 | 125 | 114 | |||||||||||||||||||||||||||||||||||||||||||
| Item 222 Solid Fiberboard 40 lbs | solid_fiberboard | Max. weight of boxes and content Max. outside dimension Length, Width and Depth added (inches) Min. bursting test, Single wall, Double wall or Solid fiberboard(lbs per sq. in.) Or Min. puncture test, Triple wall board (in. oz. per in. of tear) Min. combined weight of Facing, including Center facings of Double wall and Triple wall board Or Min. combined Weight of plies, Solid Fiberboard, Excluding adhesives (lbs. per 1,000 sq. ft.) | Solid Fiberboard Boxes | 40 | 60 | 175 | 149 | |||||||||||||||||||||||||||||||||||||||||||
| Item 222 Solid Fiberboard 65 lbs | solid_fiberboard | Max. weight of boxes and content Max. outside dimension Length, Width and Depth added (inches) Min. bursting test, Single wall, Double wall or Solid fiberboard(lbs per sq. in.) Or Min. puncture test, Triple wall board (in. oz. per in. of tear) Min. combined weight of Facing, including Center facings of Double wall and Triple wall board Or Min. combined Weight of plies, Solid Fiberboard, Excluding adhesives (lbs. per 1,000 sq. ft.) | Solid Fiberboard Boxes | 65 | 75 | 200 | 190 | |||||||||||||||||||||||||||||||||||||||||||
| Item 222 Solid Fiberboard 90 lbs | solid_fiberboard | Max. weight of boxes and content Max. outside dimension Length, Width and Depth added (inches) Min. bursting test, Single wall, Double wall or Solid fiberboard(lbs per sq. in.) Or Min. puncture test, Triple wall board (in. oz. per in. of tear) Min. combined weight of Facing, including Center facings of Double wall and Triple wall board Or Min. combined Weight of plies, Solid Fiberboard, Excluding adhesives (lbs. per 1,000 sq. ft.) | Solid Fiberboard Boxes | 90 | 90 | 275 | 237 | |||||||||||||||||||||||||||||||||||||||||||
| Item 222 Solid Fiberboard 120 lbs | solid_fiberboard | Max. weight of boxes and content Max. outside dimension Length, Width and Depth added (inches) Min. bursting test, Single wall, Double wall or Solid fiberboard(lbs per sq. in.) Or Min. puncture test, Triple wall board (in. oz. per in. of tear) Min. combined weight of Facing, including Center facings of Double wall and Triple wall board Or Min. combined Weight of plies, Solid Fiberboard, Excluding adhesives (lbs. per 1,000 sq. ft.) | Solid Fiberboard Boxes | 120 | 100 | 350 | 283 | |||||||||||||||||||||||||||||||||||||||||||
| Item 222 Triple Wall 240 lbs | corrugated_board | Max. weight of boxes and content Max. outside dimension Length, Width and Depth added (inches) Min. bursting test, Single wall, Double wall or Solid fiberboard(lbs per sq. in.) Or Min. puncture test, Triple wall board (in. oz. per in. of tear) Min. combined weight of Facing, including Center facings of Double wall and Triple wall board Or Min. combined Weight of plies, Solid Fiberboard, Excluding adhesives (lbs. per 1,000 sq. ft.) | Triple Wall Corrugated Fiberboard Boxes | 240 | 110 | 700 | 168 | 67 | Min. Edge Crush Test (ECT) (labs. per in. width) | |||||||||||||||||||||||||||||||||||||||||
| Item 222 Triple Wall 260 lbs | corrugated_board | Max. weight of boxes and content Max. outside dimension Length, Width and Depth added (inches) Min. bursting test, Single wall, Double wall or Solid fiberboard(lbs per sq. in.) Or Min. puncture test, Triple wall board (in. oz. per in. of tear) Min. combined weight of Facing, including Center facings of Double wall and Triple wall board Or Min. combined Weight of plies, Solid Fiberboard, Excluding adhesives (lbs. per 1,000 sq. ft.) | Triple Wall Corrugated Fiberboard Boxes | 260 | 115 | 900 | 222 | 80 | Min. Edge Crush Test (ECT) (labs. per in. width) | |||||||||||||||||||||||||||||||||||||||||
| Item 222 Triple Wall 280 lbs | corrugated_board | Max. weight of boxes and content Max. outside dimension Length, Width and Depth added (inches) Min. bursting test, Single wall, Double wall or Solid fiberboard(lbs per sq. in.) Or Min. puncture test, Triple wall board (in. oz. per in. of tear) Min. combined weight of Facing, including Center facings of Double wall and Triple wall board Or Min. combined Weight of plies, Solid Fiberboard, Excluding adhesives (lbs. per 1,000 sq. ft.) | Triple Wall Corrugated Fiberboard Boxes | 280 | 120 | 1100 | 264 | 90 | Min. Edge Crush Test (ECT) (labs. per in. width) | |||||||||||||||||||||||||||||||||||||||||
| Item 222 Triple Wall 300 lbs | corrugated_board | Max. weight of boxes and content Max. outside dimension Length, Width and Depth added (inches) Min. bursting test, Single wall, Double wall or Solid fiberboard(lbs per sq. in.) Or Min. puncture test, Triple wall board (in. oz. per in. of tear) Min. combined weight of Facing, including Center facings of Double wall and Triple wall board Or Min. combined Weight of plies, Solid Fiberboard, Excluding adhesives (lbs. per 1,000 sq. ft.) | Triple Wall Corrugated Fiberboard Boxes | 300 | 125 | 1300 | 360 | 112 | Min. Edge Crush Test (ECT) (labs. per in. width) |
Where this came from
Every record above links the page it was taken from and quotes the sentence that states it. These are the 8 sources this dataset was assembled from.
- evergreenresources.comhttps://evergreenresources.com/glass-neck-finish-dimensions/
- contapack.com.auhttps://www.contapack.com.au/SPI-Neck-Finishes.html
- uline.comhttps://www.uline.com/Product/Detail/S-18339/Corrugated-Boxes-32-ECT/12-x-9-x-6-Lightweight-32-ECT-Corrugated-Boxes
- evergreenresources.comhttps://evergreenresources.com/plastic-bottle-neck-finishes/
- en.wikipedia.orghttps://en.wikipedia.org/wiki/EUR-pallet
- epal-pallets.orghttps://www.epal-pallets.org/eu-en/load-carriers/epal-euro-pallet
- cetie.orghttps://www.cetie.org/en/finish-data-sheets-gme_102.html
- ipack.comhttps://www.ipack.com/blog/corrugated-rules-and-regulations
Machine-readable
- data.jsonThe whole dataset — every record with its source URL and source quote.
- Open Knowledge Format bundleOne JSON object per line — every record's frontmatter and quoted span exactly as it is held here, in one fetch.
- data.csvThe same records as one flat table, for a spreadsheet or a dataframe. The last four columns are the source URL, the quoted sentence it was read from, the date we last checked it, and which columns are our reading rather than the page's words.
- How this is made and checkedWhat "verified against source" does and does not mean.
From your own code
Same records, same quotes, without scraping the page: refsource is on PyPI and npm. Each value comes back carrying the URL it was read from and the sentence on that page that states it — .source and .quote sit on the value itself rather than in a side channel, so the checking step is available instead of skipped.
pip install refsource
refsource lookup packaging-material-specification-equivalence specification_id="18-410 (glass)"
npx -y refsource lookup packaging-material-specification-equivalence specification_id="18-410 (glass)"Set your AI assistant up to use this
Two files and no account. Put this in .mcp.json at the root of your project — Claude Code, Cursor, Windsurf, VS Code and Codex all read that file — and your assistant can look this dataset up instead of recalling it. The server is remote, keyless and read-only.
{
"mcpServers": {
"referencesource": {
"type": "http",
"url": "https://referencesource.org/mcp"
}
}
}Add to Cursor · or, on the command line: claude mcp add --transport http referencesource https://referencesource.org/mcp --scope project
Then one line in the project's CLAUDE.md or AGENTS.md, so the assistant knows when to reach for it:
When a question needs "Packaging specification equivalence: neck finishes, corrugated grades and pallet standards", call the referencesource MCP server at https://referencesource.org/mcp (tool `search_records`, dataset_slug `packaging-material-specification-equivalence`) instead of answering from memory — every record it returns carries its source URL and a verbatim quote from that page.What each tool does, and the servers built over single registers: Connect your AI assistant.