GME30.23 - PET finish 26.7/21.8-17-3/6.35
What is the specification type for GME30.23 - PET finish 26.7/21.8-17-3/6.35?
For GME30.23 - PET finish 26.7/21.8-17-3/6.35, specification type is neck_finish, recorded from its source on 2026-09-23.
Specifications and dimensions of the 26.7 mm screw finish with three (3) thread starts and a 17.07 mm height for flat waters and non carbonated beverages. This finish can be used for aseptic filling and filling with introduction of nitrogen. This finish is designed to take a tamper evident ...
— cetie.org, retrieved 2026-09-23
- Specification ID
- GME30.23 - PET finish 26.7/21.8-17-3/6.35 our reading
- Specification type
- neck_finish our reading
- Description
- Specifications and dimensions of the 26.7 mm screw finish with three (3) thread starts and a 17.07 mm height for flat waters and non carbonated beverages. This finish can be used for aseptic filling and filling with introduction of nitrogen. This finish is designed to take a tamper evident ... verified
Values marked our reading are our classification of what the source says — the source does not print them in those words. The quote below is the evidence for each one; judge it yourself.
Where each value comes from
The value above is stated away from the sentence quoted with the answer, so the passage that states it is shown here too.
Specification ID
GME30.23 - PET finish 26.7/21.8-17-3/6.35
— all from cetie.org, retrieved 2026-09-23
Source
- cetie.orghttps://www.cetie.org/en/finish-data-sheets-gme_102.html