Reference Source

Power tool battery platform and accessory interface compatibility

Which power tool batteries, chargers, adapters and accessory interfaces work with which tools and brands, drawn from the manufacturers' own pages: Milwaukee M18, DEWALT 20V MAX/FLEXVOLT and the DCA1820 18V adapter fit table, RYOBI 18V ONE+, Makita LXT/XGT and the ADP10 charger adapter, the Bosch-led AMPShare alliance, the Metabo-led Cordless Alliance System (CAS), the Bosch/Fein Starlock oscillating multi-tool interface, and Heller's drill-bit shank interface guide. Answers 'does a FLEXVOLT battery work in a 20V MAX tool', 'which brands share the AMPShare / CAS 18V battery', 'will the DCA1820 adapter fit tool model X', and 'is a Starlock blade backward compatible with OIS tools' — questions where the wrong answer means a tool that will not run or a battery that will not charge.

Records273
Sources22
Verified
Review by
LicenceFactual compilation with source citations. Compatibility facts are taken from the manufacturers' and alliance operators' own published pages with a short attributed quote linking back; no compilation is reproduced.

2 records where two or more sources state different values. Both sides are reproduced on the record page, each with its own source and quote.

The data

ItemBrandSystem / platformModel no.Compatible withNotesNot compatible withFit verdict
DCA1820DEWALT18VDCA1820most 18V DEWALT tools
Dual chemistry chargerRYOBI18V ONE+all Ryobi® ONE+™ batteries
in-vehicle chargerRYOBI18V ONE+all past and current Ryobi® 18V ONE+™ batteries
RYOBI 18V ONE+ SystemRYOBI18V ONE+over 225 unique products
RYOBI 18V ONE+ toolsRYOBI18V ONE+all RYOBI 18V ONE+ batteries
Voltage Compatibility: 18VRYOBI18V ONE+(See manual for other voltages)
DCA1820DEWALT20VDCA1820Most DEWALT 20V batteries(Excluding 20V Max)
DCD998DEWALT20V MaxDCD998higher capacity batteriesHammer Drill with Power Detect
DCD999DEWALT20V MaxDCD999Hammer Drill with FlexVolt Advantage
FLEXVOLT ADVANTAGE™ toolsDEWALT20V MAX*all DEWALT 20V MAX* and 20V/60V MAX* FLEXVOLT® batteries
FLEXVOLT ® batteriesDEWALT20V MAX*DEWALT 20V MAX* power tools
DCA1820DEWALT20V premiumDCA1820(instead, use DCB201, DCB203, DCB203BT or up to 3.0 AH Batteries)DEWALT 20V premium batteries (DCB200, DCB204, DCB204BT, DCB205, or more than 4 AH Batteries ) in 18-Volt compact drills DC970, DC759
AAT Antriebstechnik GmbHAAT AntriebstechnikAMPShareCargoMaster CC160 Li-ion CargoMaster CC200 Li-ion
AlmiAlmiAMPShare
BEPo PowertoolsBEPoAMPShare
18V batteries and chargersBoschAMPShareBosch 18V power tools and a growing list of cordless products from AMPShare™ brands
AMPShareBoschAMPSharebased on the Professional 18V System by Bosch Professional
AMPShare battery systemBoschAMPSharemore than 35 brands and over 350 tools
AMPShare-compatible toolsBoschAMPSharethe Bosch POWER FOR ALL 18V battery system
Bosch ProfessionalBoschAMPShareComplete 18V range
Bosch Professional 18V batteries and chargersBoschAMPShareall AMPShare-compatible toolsAMPShare batteries are fully compatible with Bosch Professional 18V tools and chargers all the way back to 2008
GBA18V80BoschAMPShareBosch 18V chargers and the AMPShare™ Systemoptimized to drive Bosch PROFACTOR™ tools with BITURBO Brushless™ Technology
ProCORE18VBoschAMPSharea range of high-performance 18V batteries that deliver extreme power but in a more compact design
Bosch RexrothBosch RexrothAMPShare
brennenstuhl®brennenstuhlAMPShare360° all-round spotlight Floodlight Torch
Budak ToolsBudak ToolsAMPShareSTYcutter product line (mobile floor-standing devices, ultra-mobile handheld devices, stationary floor-standing devices)
FEINFEINAMPShareAll 18V FEIN power tools
fischer FXC 85fischerAMPShareall AMPShare machines of the same voltage class
GEDAGEDAAMPShare
HONSELHONSELAMPShareRivdom eBZ 1 cordless riveter Rivdom eVNG 2 cordless riveter
IntercableIntercableAMPShareStilo cutting tools Stilo press tools Stilo hole-punching tools
KlaukeKlaukeAMPSharePress tools Cutting tools Hole-punching tools
Kummert GmbHKummertAMPShare
LedlenserLedlenserAMPShareits powerful Bosch Professional 18V battery
LeisterLeisterAMPShare
MATO GmbH & Co. KGMATOAMPShareWith the MATO Accu-Greaser, operated via the reliable AMPShare battery by BOSCH
COX™medmixAMPShare
MK™medmixAMPShare
MESTOMESTOAMPShare
PerfectProPerfectProAMPShare
PlanumPlanumAMPShareMach 1
ROTHENBERGERROTHENBERGERAMPSharePipe press machines Pipe inspection cameras Pipe bending machines Thread cutting machines
OrgapackSignodeAMPShare
SignodeSignodeAMPShare
StrapexSignodeAMPShare
SONLUXSONLUXAMPSharethe GLADIATOR SLI B18V work light powered by Bosch
AircraftStürmer MaschinenAMPShare
cleancraftStürmer MaschinenAMPShare
SteinelSteinelAMPShareMobileGlue 5011 AMP hot glue gun MobileHeat 7 rod heat guns
STROXXSTROXXAMPShare
SuitXSUITX by ottobockAMPShareBy integrating the innovative Amp Share battery technology, SUITX is focusing on ease of use and maximum quality
TitanTitanAMPShareCordless airless spray painting system HVLP paint spray system
TranspakTranspakAMPShare
WagnerWagnerAMPShareCordless airless spray painting system XVLP paint spray system
BaierBaierCAS
BECKBECKCASthe company now offers CAS cordless tools for stapling and nailing
BirchmeierBirchmeierCAS
CembreCembreCAS
PressfitCembreCAS
CEMO GroupCEMOCAS
CleanfixCleanfixCAS
CollomixCollomixCAS
EddingEddingCAS
EibenstockEibenstockCAS
EisenblätterEisenblätterCAS
EnerpacEnerpacCAS
Exact ToolsExact ToolsCAS
FelderFelderCAS
FischerFischerCAS
GESIPAGESIPACAS
GhibliGhibliCAS
HaagaHaagaCAS
HellermannTytonHellermannTytonCAS
HolmatroHolmatroCAS
iMEXiMEXCAS
ITHITHCAS
JöstJöstCAS
JEPSONJEPSONCAS
LamelloLamelloCAS
Lievers HollandLievers HollandCAS
MafellMafellCAS
Magic ScreedMagic ScreedCAS
CASMetaboCASover 50 brands and 500 tools
MetaboMetaboCASWith the LiHD technology, Metabo is leading provider in the cordless segment
MontipowerMontipowerCAS
NovusNovusCAS
PREBENAPREBENACASPREBENA cordless tools offer maximum freedom of movement at full performance for the cordless construction site
PROMOTECHPROMOTECHCAS
pulsFOGpulsFOGCAS
RICORICOCAS
RIEXINGERRIEXINGERCAS
RokamatRokamatCAS
RothenbergerRothenbergerCAS
RubiRubiCAS
SCANGRIPSCANGRIPCAS
SCHMALZSCHMALZCAS
SkidataSkidataCAS
SpeweSpeweCAS
starmixstarmixCAS
SteinelSteinelCAS
StraussStraussCAS
SUHNERSUHNERCAS
TKRTKRCAS
TRUMPFTRUMPFCAS
VIRAXVIRAXCAS
18V CORE18V® Lithium-Ion 8 Ah High Power BatteryBoschCore18VGBA18V80Bosch 18V tools and chargers
CXTMakitaCXTits own smaller slide-style battery70-plus products
DC011DEWALTDCA1820 adapterDoes Not Fit, Non-Functional
DC012DEWALTDCA1820 adapterDoes Not Fit, Non-Functional
DC018DEWALTDCA1820 adapterDoes Not Fit, Non-Functional
DC020DEWALTDCA1820 adapterDoes Not Fit, Non-Functional
DC022DEWALTDCA1820 adapterDoes Not Fit, Non-Functional
DC500DEWALTDCA1820 adapterthe door will not close on the battery and adapterFits, Functional
DC608BDEWALTDCA1820 adapterFits, Non-Functional
DC608KDEWALTDCA1820 adapterFits, Non-Functional
DC616KDEWALTDCA1820 adapterFits, Non-Functional
DC618KDEWALTDCA1820 adapterFits, Non-Functional
DC628KDEWALTDCA1820 adapterFits, Non-Functional
DC9310DEWALTDCA1820 adapterDoes Not Fit, Non-Functional
DC9319DEWALTDCA1820 adapterDoes Not Fit, Non-Functional
DC9320DEWALTDCA1820 adapterDoes Not Fit, Non-Functional
DCB103DEWALTDCA1820 adapterDoes Not Fit, Non-Functional
DCL060DEWALTDCA1820 adapterDoes Not Fit, Non-Functional
DCL061DEWALTDCA1820 adapterDoes Not Fit, Non-Functional
DCS370DEWALTDCA1820 adapterType 1: Does Not Fit, Non-Functional; Type 2: Fits, Functional
DW074DEWALTDCA1820 adapterthe door will not close on the battery and adapterFits, Functional
DW079DEWALTDCA1820 adapterthe door will not close on the battery and adapterFits, Functional
DW911DEWALTDCA1820 adapterDoes Not Fit, Non-Functional
DW9116DEWALTDCA1820 adapterDoes Not Fit, Non-Functional
DW9117DEWALTDCA1820 adapterDoes Not Fit, Non-Functional
120V MAX*DEWALTFLEXVOLT®2 DEWALT 60V MAX* Lithium ion batteries combinedMaximum initial battery voltage (measured without a workload) is 20, 60, and 120 volts. Nominal voltage is 18, 54, and 108.
20v/60V MAX* Flexvolt 12ah BatteryDEWALTFLEXVOLT®DCB612
20v/60V MAX** flexvolt 15ah batteryDEWALTFLEXVOLT®DCB615
20V/60V MAX* FLEXVOLT® 6Ah Battery KitDEWALTFLEXVOLT®DCB606C
20v/60V MAX* Flexvolt 9ah BatteryDEWALTFLEXVOLT®DCB609
FLEXVOLT® batteriesDEWALTFLEXVOLT®DEWALT 20V MAX* and 60V MAX* power toolspatented technology that automatically switch voltages when you change your tools
1/4'' HEXHellercordless drills and screwdriversHexagonal shank with an inscribed circle diameter of 6.35 mm (= 1/4")
CYLHellerCylindrical shank, with same diameter as body up to a certain diameter, after that: reduced shank
HEXHellera 3-jaw drill chuckHexagonal shank without a specific inscribed circle diameter to prevent twisting
M14Hellerangle grindersStandard M14 metric threaded shank
M16Hellercore drill bits, socket cutters, and hole sawsStandard M16 metric threaded shank
MorseHellerstationary machine toolsTapered cylindrical shank with 2.8 - 3° taper angle
RatioHellerThreaded shank, 14 mm outer diameter, with special double-start round threads
TriHellera 3-jaw drill chuckCylindrical shank with same diameter as body with three recessed surfaces to prevent twisting
18V LXT toolsMakitaLXTthe same batteriesWithin the platform, packs interchange
LXTMakitaLXTthe world's largest compatible 18V slide-style battery system, with more than 350 cordless products
X2MakitaLXTtwo 18V LXT batteriesX2 tools carry two battery ports
M12™ batteriesMilwaukeeM12™M12™ tools & chargers
M12 REDLITHIUM packMilwaukeeM12every M12 tooland only in M12 tools; nothing on this shelf accepts an M18 pack
48-11-1815MilwaukeeM1848-11-1815the entire M18 system including M18 FUEL (brushless) and standard M18 tools
48-11-1820MilwaukeeM1848-11-1820the entire M18 system including M18 FUEL (brushless) and standard M18 tools
48-11-1828MilwaukeeM1848-11-1828the entire M18 system including M18 FUEL (brushless) and standard M18 tools
48-11-1840MilwaukeeM1848-11-1840the entire M18 system including M18 FUEL (brushless) and standard M18 tools
48-11-1850MilwaukeeM1848-11-1850the entire M18 system including M18 FUEL (brushless) and standard M18 tools
48-11-1860MilwaukeeM1848-11-1860the entire M18 system including M18 FUEL (brushless) and standard M18 tools
48-11-1862MilwaukeeM1848-11-1862the entire M18 system including M18 FUEL (brushless) and standard M18 tools
Air Compressor 2-GallonMilwaukeeM182840-20
Angle Grinder 4-1/2″/5″ (FUEL)MilwaukeeM182780-20M18 FUEL, 9,000 RPM
Angle Grinder 4-1/2″/5″ Slide (FUEL)MilwaukeeM182881-20Slide switch, lock-on
Authentic M18™ batteriesMilwaukeeM18™Milwaukee M18™ chargersUsers should not use third party batteries or chargers.
Auto-Feed Screw SystemMilwaukeeM186841-20Collated screw driving
Band Saw 3-1/4″ Compact (FUEL)MilwaukeeM182829-20Deep cut compact band saw
Blower (FUEL)MilwaukeeM182724-20Up to 160 MPH, 450 CHM
Bluetooth RadioMilwaukeeM182890-20
Brad Nailer 18ga (FUEL)MilwaukeeM182746-2018ga brad nailer
Chainsaw 16″ (FUEL)MilwaukeeM182727-2016″ bar and chain
Chipping Hammer SDS-MaxMilwaukeeM182719-20SDS-Max demolition only
Circular Saw 6-1/2″ (FUEL)MilwaukeeM182730-2018V brushless, 5,800 RPM
Circular Saw 7-1/4″ (FUEL)MilwaukeeM182732-20Brushless, 5,800 RPM
Circular Saw 7-1/4″ FUEL (Rear Handle)MilwaukeeM182830-20Rear handle, 5,800 RPM
Compact Hammer Drill/Driver 1/2″MilwaukeeM182904-20M18 FUEL compact brushless
Compact Reciprocating Saw HackzallMilwaukeeM182625-20One-hand Hackzall
Compact VacuumMilwaukeeM180882-20
Crown Stapler 18ga (FUEL)MilwaukeeM182749-2018gj narrow crown
Cut-Off Saw 9″ (FUEL)MilwaukeeM182786-206″ M18 FUEL
Die Grinder 1/4″ (FUEL)MilwaukeeM182784-20Inline die grinder
Drill/Driver 1/2″MilwaukeeM182801-20Standard M18, 2-speed
Finish Nailer 15ga Angled (FUEL)MilwaukeeM182740-2015ga angled finish nailer
Finish Nailer 16ga Straight (FUEL)MilwaukeeM182741-2016ga straight magazine
Framing Nailer 21° (FUEL)MilwaukeeM182744-2021° plastic collated
Framing Nailer 30° (FUEL)MilwaukeeM182745-2030° paper collated
Grease Gun (FUEL)MilwaukeeM182646-20Cordless grease gun
Hammer Drill/Driver 1/2″MilwaukeeM182804-20M18 FUEL brushless, 1,200 in·lbs
Hedge Trimmer 24″ (FUEL)MilwaukeeM182726-2018″ dual blade brushless
High-Torque Impact Wrench 1/2″ (FUEL)MilwaukeeM182767-201,400 ft·lbs (xtreme)
Hole HAWG Right Angle Drill 1/2″MilwaukeeM182707-20D-handle, 450 in·lbs
Impact Driver 1/4″ HexMilwaukeeM182850-20Standard M18 impact driver
Impact Driver 1/4″ Hex (FUEL)MilwaukeeM182853-20M18 FUEL brushless
Impact Wrench 1/2″ (FUEL)MilwaukeeM182962-20GEN-2, friction ring
Impact Wrench 1″ (FUEL)MilwaukeeM182868-201,800 ft·lbs, 1″ drive
Impact Wrench 3/4″ (FUEL)MilwaukeeM182864-201,100 ft·lbs high-torque
Inflator (FUEL)MilwaukeeM182848-20Digital inflator
Jig Saw (FUEL)MilwaukeeM182737-20M18 FUEL brushless jig saw
Lawn Mower 21″ (FUEL)MilwaukeeM182823-2021″ self-propelled
M18 and M12 Multi-Voltage ChargerMilwaukeeM18both M18 and M12 batteries
M18™ batteriessources differMilwaukeeM18™M18™ toolsThere are three tiers of M18™ REDLITHIUM™ batteries. REDLITHIUM™ FORGE™, REDLITHIUM™ HIGH OUTPUT™, and standard REDLITHIUM™.
M18 batteriesMilwaukeeM18M18 tools and chargers
M18 REDLITHIUM packMilwaukeeM18every M18 tool, FUEL or notM18 packs fit no M12 tool and no MX FUEL machine
M18CMilwaukeeM18M18Cany M18 battery
Metal-Cutting Circular Saw 5-3/8″MilwaukeeM182782-2014″ abrasive/diamond blade
Mid-Torque Impact Wrench 1/2″ (FUEL)MilwaukeeM182863-20650 ft·lbs, ONE-KEY
Mid-Torque Impact Wrench 3/8″ (FUEL)MilwaukeeM182960-20GEN-2, 3/8″ drive
Milwaukee M12MilwaukeeM18Different voltage and connector❌ No
Milwaukee M18 chargersMilwaukeeM18All M18 chargers accept all M18 batteries✅ Yes
Milwaukee M18 toolsMilwaukeeM18Universal — all M18 batteries, all M18 tools✅ Yes
Milwaukee MX FUELMilwaukeeM18Different platform for large equipment❌ No
Miter Saw 10″ (FUEL)MilwaukeeM182734-2010″ dual bevel sliding
Miter Saw 7-1/4″ (FUEL)MilwaukeeM182733-20Brushless, 5,000 RPM
MXCMilwaukeeM18MXCany M18 battery
Oscillating Multi-Tool (FUEL)MilwaukeeM182836-20StarlockMax brushless
Pin Nailer 23ga (FUEL)MilwaukeeM182748-2023ga headless pinner
Planer 3-1/4″ (FUEL)MilwaukeeM182623-20Brushless 16,500 RPM
Press Tool (FUEL)MilwaukeeM182773-20ProPEX/Press tool
Random Orbit Sander 5″ (FUEL)MilwaukeeM182648-20FUEL brushless, 12,000 OPM
Ratchet 1/2″ (FUEL)MilwaukeeM182558-20300 ft·lbs, M18 FUEL
Ratchet 3/8″ (FUEL)MilwaukeeM182557-20250 ft·lbs, 250 RPM
Reciprocating Saw SawzallMilwaukeeM182620-20Standard M18, 0–3,000 SPM
Reciprocating Saw Sawzall (FUEL)MilwaukeeM182720-20FUEL brushless
Right Angle Drill 3/8″MilwaukeeM182615-20Right angle drill 18V
Roofing Nailer (FUEL)MilwaukeeM182760-20Coil roofing nailer
Router 1-3/4 HP (FUEL)MilwaukeeM182838-20M18 FUEL brushless router
SDS-Max Rotary Hammer 1-3/4″ (FUEL)MilwaukeeM182718-20Heavy SDS-Max
SDS-Max Rotary Hammer 1-9/16″ (FUEL)MilwaukeeM182717-20SDS-Max M18 FUEL
SDS-Plus Rotary Hammer 1-1/8″ (FUEL)MilwaukeeM182715-20Brushless AVT
SDS-Plus Rotary Hammer 1″ (FUEL)MilwaukeeM182712-20M18 FUEL brushless
SDS-Plus Rotary Hammer 5/8″MilwaukeeM182612-20M18 standard, 3-mode
String Trimmer (FUEL)MilwaukeeM182825-2015″ brushless trimmer
Super HAWG Right Angle Drill 7/16″MilwaukeeM182709-20High-power right angle
Table Saw 8-1/4″ (FUEL)MilwaukeeM182736-21HD8-1/4″ table saw
Track Saw 6-1/2″ (FUEL)MilwaukeeM182831-20M18 FUEL, for guide rail
Wet/Dry Vacuum 6 GallonMilwaukeeM180910-20
Wireless Jobsite SpeakerMilwaukeeM182891-20
XGT and LXT batteriesMakitaan LXT pack will not power an XGT tool, nor the reverse
FUEL toolsMilwaukeethe same platform batteries as non-FUEL toolsthe badge describes the tool's internals, not a different battery system
multi-voltage chargerMilwaukeeboth M12 and M18 packsbut it does not make them interchangeable
MX FUEL REDLITHIUM packsMilwaukeeMX FUELall MX FUEL equipment and chargersAn MX pack will not run an M18 tool, nor the reverse.
Oscillating Interface System (OIS)BoschOISdifferent brand’s accessories with different brand’s oscillating toolscreated by Bosch in 2010; the first standardised accessory-fitting system for oscillating tools
SDSHellerSDShammer drill bitsthe established standard connection for hammer drill bits today
SDS-maxHellerSDShammer drills > 5 kgCylindrical shank, 18 mm in diameter, two round grooves for axial fixation, three wedge grooves to transfer torque
SDS-PlusHellerSDShammer drills < 5 kgCylindrical shank, 10 mm in diameter, two round grooves for axial fixation, two wedge grooves to transfer torque
Stanley Black & DeckerStanley Black & Deckershare similarly styled battery pack form factors, but you still won&#8217;t see cross-brand compatibility there
Bosch GOP40-30BoschStarlockGOP40-30uses the Starlock mounting system with a snap-in function
Starlock-compatible toolsBosch, Fein, Metabo, MakitaStarlock
Starlocksources differBosch / FeinStarlockall Starlock interfacesbackward compatible to Bosch OIS&trade; systems (Bosch, Fein, Makita &reg; , Milwaukee &reg; and other pro tools)
Starlock bladesBosch / FeinStarlockOIS systems and OIS-compatible tools
Starlock interface systemBosch / FeinStarlocka no-touch quick change when used with a Bosch tool featuring the Snap-In System
StarLock toolsBosch / FeinStarlockother styles of blades
StarlockMaxBosch / FeinStarlockextreme-duty blades for the toughest professional applications
StarlockMax toolsBosch / FeinStarlockthe lower Starlock accessoriesto protect Starlock tools from damaging themselves, they will not be able to accept StarlockMax accessories
OISBoschStarlockAccessories with an OIS interface aren&#8217;t compatible with Starlock multi-tools.Starlock multi-tools
StarlockBoschStarlockcreated by Bosch and Fein in 2016; an improved standardised accessory-fitting system for multi-tools
STARLOCK® ACCESSORIESBoschStarlockANY STARLOCK® OR OIS COMPATIBLE TOOL
Starlock accessoriesBoschStarlockall multi-tools, no matter if they have a Starlock, StarlockPlus, StarlockMax or OIS interface(DeWalt multi-tools require an adapter.)
StarlockMax accessoriesBoschStarlockall multi-tools with a StarlockMax interface
StarlockPlus accessoriesBoschStarlockall multi-tools with a StarlockPlus or StarlockMax interface
Dremel Multi-MaxDremelStarlockNoticeably absent are any solutions that will work with tools requiring a slotted accessory
cordless SuperCutFeinStarlockStarLock Max compatible, as well as StarLock and StarLock Pluseach next-higher level of the interface is backwards-compatible with the lower accessory tiers as well
StarlockFeinStarlocka majority of the corded or cordless oscillating multi-tools on the market
Starlock accessoriesFeinStarlockall OIS and OIS-compatible toolsbackward compatible with all OIS and OIS-compatible tools
Starlock MaxFeinStarlockbeing reserved for heavy-duty tools and accessories
Starlock mounting systemFeinStarlockStarlock accessoriesany of your existing OIS blades or accessories
18V StarLock-compatible cordless oscillating multi-toolMakitaStarlockXMT04ZB
2 pc. StarlockMax® Oscillating Multi-Tool KitBoschStarlockMax®GOP55-36B
40 pc. StarlockMax® Oscillating Multi-Tool KitBoschStarlockMax®GOP55-36C2
8 pc. StarlockMax® Oscillating Multi-Tool KitBoschStarlockMax®GOP55-36C1
18V Brushless StarlockPlus® Oscillating Multi-Tool (Bare Tool)BoschStarlockPlus®GOP18V-34N
18V Brushless StarlockPlus® Oscillating Multi-Tool Kit with (1) CORE18V® 4 Ah Advanced Power BatteryBoschStarlockPlus®GOP18V-34B14
18V EC Brushless StarlockPlus® Oscillating Multi-Tool (Bare Tool)BoschStarlockPlus®GOP18V-28N
30 pc. StarlockPlus® Oscillating Multi-Tool KitBoschStarlockPlus®GOP40-30B
Milwaukee, Ridgid, and RyobiTTIthe tools and their respective battery technologies are completely different
ADP10 adapterMakitaXGTADP1018V LXT batteriesa charging accessory only. It does not let LXT batteries run XGT tools.
ADP10 Charger adapter for XGT® to LXT®MakitaXGT®191C10-714.4V / 18V LXT® batteries(Not compatible with BL1430A)BL1430A
LXT batteryMakitaXGTXGT batteries do not fit LXT toolswill not mount in or power an XGT tool

Where this came from

Every record above links the page it was taken from and quotes the sentence that states it. These are the 22 sources this dataset was assembled from.

Machine-readable

273 records. last verified against source . due for re-check by .

Licence. Factual compilation with source citations. Compatibility facts are taken from the manufacturers' and alliance operators' own published pages with a short attributed quote linking back; no compilation is reproduced.