Cross-reference of packaging specifications that procurement, packaging engineers and brand owners need when substituting materials, matching closures to bottles, or converting between regional standards. Covers three domains: (1) SPI/GPI plastic and glass neck-finish dimensions with tolerances (T, E, H, S, I) for the 400, 410 and 415 thread series; (2) corrugated board grade equivalence between Mullen burst test and ECT edge crush test ratings, with maximum weight limits from both the Fibre Box Handbook and UPS guidelines; (3) EUR/ISO pallet footprint dimensions, load ratings and regional designations. Answers questions like 'what are the T and E dimensions for a 24-410 finish', 'is 200# Mullen the same as 32 ECT', and 'what size is a EUR 2 pallet'.

Factual compilation with source citations. Neck-finish dimensions are facts about physical measurements transcribed by vendors from GPI/SPI standards; short attributed quotes link back. Corrugated grade data is factual product information published by distributors. Pallet dimensions are widely published facts. No standard text is reproduced.

Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** 100-400

**Specification type:** neck_finish

**Description:** 100 mm neck, 400 series (1 thread turn)

**Primary dimension:** T max 100.0 mm, T min 99.10 mm

**Secondary dimension:** E max 96.95 mm, E min 96.00 mm

**Equivalence or compatibility note:** 1 Thread turn

**Additional data:** 400H max 15.55 mm, 400H min 14.80 mm; S max 1.90 mm, S min 1.14 mm; I min 85.00 mm; 5 threads/in.

> 100 | 100.0 | 99.10 | 96.95 | 96.00 | 15.55 | 14.80 | | | | | 1.90 | 1.14 | 85.00 | 5

Source: <https://www.contapack.com.au/SPI-Neck-Finishes.html>

100-400 — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards

additional_data, dimension_1, dimension_2, equivalence_note, specification_description, specification_id, specification_type


**Specification ID:** 110-400

**Specification type:** neck_finish

**Description:** 110 mm neck, 400 series (1 thread turn)

**Primary dimension:** T max 110.0 mm, T min 109.1 mm

**Secondary dimension:** E max 107.0 mm, E min 106.0 mm

**Equivalence or compatibility note:** 1 Thread turn

**Additional data:** 400H max 15.55 mm, 400H min 14.80 mm; S max 1.90 mm, S min 1.14 mm; I min 95.00 mm; 5 threads/in.

> 110 | 110.0 | 109.1 | 107.0 | 106.0 | 15.55 | 14.80 | | | | | 1.90 | 1.14 | 95.00 | 5

Source: <https://www.contapack.com.au/SPI-Neck-Finishes.html>

110-400 — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** 120-400

**Specification type:** neck_finish

**Description:** 120 mm neck, 400 series (1 thread turn)

**Primary dimension:** T max 120.0 mm, T min 119.1 mm

**Secondary dimension:** E max 117.0 mm, E min 116.0 mm

**Equivalence or compatibility note:** 1 Thread turn

**Additional data:** 400H max 17.80 mm, 400H min 17.00 mm; S max 1.90 mm, S min 1.14 mm; I min 105.0 mm; 5 threads/in.

> 120 | 120.0 | 119.1 | 117.0 | 116.0 | 17.80 | 17.00 | | | | | 1.90 | 1.14 | 105.0 | 5

Source: <https://www.contapack.com.au/SPI-Neck-Finishes.html>

120-400 — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** 18-410 (glass)

**Specification type:** neck_finish

**Description:** 18 mm glass neck, 410 series (1.5 threaded turn), GPI standard

**Primary dimension:** T 0.694 ± .010 in.

**Secondary dimension:** E 0.610 ± .010 in.

**Equivalence or compatibility note:** 1.5 threaded turn

**Additional data:** H 0.513 +.013/-.012 in.; S 0.034 +.013/-.012 in.

> 18 | 0.694 ± .010 | 0.610 ± .010 | 0.513 +.013 / -.012 | 0.034 +.013 / -.012

Source: <https://evergreenresources.com/glass-neck-finish-dimensions/>

18-410 (glass) — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** 20-400

**Specification type:** neck_finish

**Description:** 20 mm neck, 400 series (1 thread turn)

**Primary dimension:** T max 19.89 mm, T min 19.48 mm

**Secondary dimension:** E max 17.75 mm, E min 17.35 mm

**Equivalence or compatibility note:** 1 Thread turn

**Additional data:** 400H max 9.08 mm, 400H min 9.04 mm; S max 1.32 mm, S min 0.56 mm; I min 10.26 mm; 8 threads/in.

> 20 | 19.89 | 19.48 | 17.75 | 17.35 | 9.08 | 9.04 | 14.45 | 13.69 | 19.23 | 18.46 | 1.32 | 0.56 | 10.26 | 8

Source: <https://www.contapack.com.au/SPI-Neck-Finishes.html>

20-400 — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** 20-410 (glass)

**Specification type:** neck_finish

**Description:** 20 mm glass neck, 410 series (1.5 threaded turn), GPI standard

**Primary dimension:** T 0.773 ± .010 in.

**Secondary dimension:** E 0.689 ± .010 in.

**Equivalence or compatibility note:** 1.5 threaded turn

**Additional data:** H 0.544 +.013/-.012 in.; S 0.034 +.013/-.012 in.

> 20 | 0.773 ± .010 | 0.689 ± .010 | 0.544 +.013 / -.012 | 0.034 +.013 / -.012

Source: <https://evergreenresources.com/glass-neck-finish-dimensions/>

20-410 (glass) — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** 20-410

**Specification type:** neck_finish

**Description:** 20 mm neck, 410 series (1.5 thread turns)

**Primary dimension:** T max 19.89 mm, T min 19.48 mm

**Secondary dimension:** E max 17.75 mm, E min 17.35 mm

**Equivalence or compatibility note:** 1.5 Thread turns

**Additional data:** 410H max 14.45 mm, 410H min 13.69 mm; S max 1.32 mm, S min 0.56 mm; I min 10.26 mm; 8 threads/in.

> 20 | 19.89 | 19.48 | 17.75 | 17.35 | 9.08 | 9.04 | 14.45 | 13.69 | 19.23 | 18.46 | 1.32 | 0.56 | 10.26 | 8

Source: <https://www.contapack.com.au/SPI-Neck-Finishes.html>

20-410 — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** 20-415

**Specification type:** neck_finish

**Description:** 20 mm neck, 415 series (2 thread turns)

**Primary dimension:** T max 19.89 mm, T min 19.48 mm

**Secondary dimension:** E max 17.75 mm, E min 17.35 mm

**Equivalence or compatibility note:** 2 Thread turns

**Additional data:** 415H max 19.23 mm, 415H min 18.46 mm; S max 1.32 mm, S min 0.56 mm; I min 10.26 mm; 8 threads/in.

> 20 | 19.89 | 19.48 | 17.75 | 17.35 | 9.08 | 9.04 | 14.45 | 13.69 | 19.23 | 18.46 | 1.32 | 0.56 | 10.26 | 8

Source: <https://www.contapack.com.au/SPI-Neck-Finishes.html>

20-415 — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** 200# Double Wall

**Specification type:** corrugated_board

**Description:** 200 lb. Mullen burst test, double wall corrugated

**Primary dimension:** 200 lbs/sq.in. burst

**Secondary dimension:** 80 lbs

**Equivalence or compatibility note:** 200# Mullen equivalent row, double wall

**Additional data:** UPS: 60 lbs

> 200# Double Wall | 80 lbs | 60 lbs |

Source: <https://www.uline.com/Product/Detail/S-4406/Corrugated-Boxes-200-Test/12-x-9-x-6-Corrugated-Boxes>

200# Double Wall — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards

additional_data, dimension_1, equivalence_note, specification_description, specification_type


**Specification ID:** 200# Double Wall

**Specification type:** corrugated_board

**Description:** 200 pound Mullen burst test, double wall corrugated

**Primary dimension:** 200 lbs/sq.in. burst

**Secondary dimension:** Fibre Box Handbook: 80 lbs max weight per box

**Equivalence or compatibility note:** UPS maximum weight per box: 60 lbs

**Additional data:** UPS: 60 lbs

> 200# Double Wall | 80 lbs | 60 lbs

Source: <https://www.uline.com/Product/Detail/S-18339/Corrugated-Boxes-32-ECT/12-x-9-x-6-Lightweight-32-ECT-Corrugated-Boxes>

additional_data, dimension_1, dimension_2, equivalence_note, specification_description, specification_type


**Specification ID:** 200# Single Wall

**Specification type:** corrugated_board

**Description:** 200 lb. Mullen burst test, single wall corrugated

**Primary dimension:** 200 lbs/sq.in. burst

**Secondary dimension:** 65 lbs

**Equivalence or compatibility note:** 200# Test: 60% stronger bursting strength. Recommended by UPS for shipping up to 40 lbs.

**Additional data:** UPS: 40 lbs

> 200# Single Wall | 65 lbs | 40 lbs |

Source: <https://www.uline.com/Product/Detail/S-4406/Corrugated-Boxes-200-Test/12-x-9-x-6-Corrugated-Boxes>

200# Single Wall — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** 200# Single Wall

**Specification type:** corrugated_board

**Description:** 200 pound Mullen burst test, single wall corrugated

**Primary dimension:** 200 lbs/sq.in. burst

**Secondary dimension:** Fibre Box Handbook: 65 lbs max weight per box

**Equivalence or compatibility note:** Recommended by UPS for shipping up to 40 lbs

**Additional data:** UPS: 40 lbs; 200# Test: 60% stronger bursting strength

> 200# Single Wall | 65 lbs | 40 lbs

Source: <https://www.uline.com/Product/Detail/S-18339/Corrugated-Boxes-32-ECT/12-x-9-x-6-Lightweight-32-ECT-Corrugated-Boxes>


**Specification ID:** 22-410 (glass)

**Specification type:** neck_finish

**Description:** 22 mm glass neck, 410 series (1.5 threaded turn), GPI standard

**Primary dimension:** T 0.852 ± .010 in.

**Secondary dimension:** E 0.768 ± .010 in.

**Equivalence or compatibility note:** 1.5 threaded turn

**Additional data:** H 0.575 +.013/-.012 in.; S 0.034 +.013/-.012 in.

> 22 | 0.852 ± .010 | 0.768 ± .010 | 0.575 +.013 / -.012 | 0.034 +.013 / -.012

Source: <https://evergreenresources.com/glass-neck-finish-dimensions/>

22-410 (glass) — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** 24-400

**Specification type:** neck_finish

**Description:** 24 mm neck, 400 series (1 thread turn)

**Primary dimension:** T max 23.87 mm, T min 23.47 mm

**Secondary dimension:** E max 21.74 mm, E min 21.34 mm

**Equivalence or compatibility note:** 1 Thread turn

**Additional data:** 400H max 10.54 mm, 400H min 9.78 mm; S max 1.55 mm, S min 0.79 mm; I min 13.10 mm; 8 threads/in.

> 24 | 23.87 | 23.47 | 21.74 | 21.34 | 10.54 | 9.78 | 16.79 | 16.03 | 24.69 | 23.93 | 1.55 | 0.79 | 13.10 | 8

Source: <https://www.contapack.com.au/SPI-Neck-Finishes.html>

24-400 — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** 24-410 (glass)

**Specification type:** neck_finish

**Description:** 24 mm glass neck, 410 series (1.5 threaded turn), GPI standard

**Primary dimension:** T 0.930 ± .010 in.

**Secondary dimension:** E 0.846 ± .010 in.

**Equivalence or compatibility note:** 1.5 threaded turn

**Additional data:** H 0.636 +.013/-.012 in.; S 0.046 +.016/-.015 in.

> 24 | 0.930 ± .010 | 0.846 ± .010 | 0.636 +.013 / -.012 | 0.046 +.016 / -.015

Source: <https://evergreenresources.com/glass-neck-finish-dimensions/>

24-410 (glass) — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** 24-410

**Specification type:** neck_finish

**Description:** 24 mm neck, 410 series (1.5 thread turns)

**Primary dimension:** T max 23.87 mm, T min 23.47 mm

**Secondary dimension:** E max 21.74 mm, E min 21.34 mm

**Equivalence or compatibility note:** 1.5 Thread turns

**Additional data:** 410H max 16.79 mm, 410H min 16.03 mm; S max 1.55 mm, S min 0.79 mm; I min 13.10 mm; 8 threads/in.

> 24 | 23.87 | 23.47 | 21.74 | 21.34 | 10.54 | 9.78 | 16.79 | 16.03 | 24.69 | 23.93 | 1.55 | 0.79 | 13.10 | 8

Source: <https://www.contapack.com.au/SPI-Neck-Finishes.html>

24-410 — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** 24-415

**Specification type:** neck_finish

**Description:** 24 mm neck, 415 series (2 thread turns)

**Primary dimension:** T max 23.87 mm, T min 23.47 mm

**Secondary dimension:** E max 21.74 mm, E min 21.34 mm

**Equivalence or compatibility note:** 2 Thread turns

**Additional data:** 415H max 24.69 mm, 415H min 23.93 mm; S max 1.55 mm, S min 0.79 mm; I min 13.10 mm; 8 threads/in.

> 24 | 23.87 | 23.47 | 21.74 | 21.34 | 10.54 | 9.78 | 16.79 | 16.03 | 24.69 | 23.93 | 1.55 | 0.79 | 13.10 | 8

Source: <https://www.contapack.com.au/SPI-Neck-Finishes.html>

24-415 — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** 275# Double Wall

**Specification type:** corrugated_board

**Description:** 275 lb. Mullen burst test, double wall corrugated

**Primary dimension:** 275 lbs/sq.in. burst

**Secondary dimension:** 100 lbs

**Equivalence or compatibility note:** 275# Mullen equivalent row, double wall

**Additional data:** UPS: 80 lbs

> 275# Double Wall | 100 lbs | 80 lbs |

Source: <https://www.uline.com/Product/Detail/S-4406/Corrugated-Boxes-200-Test/12-x-9-x-6-Corrugated-Boxes>

275# Double Wall — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** 275# Double Wall

**Specification type:** corrugated_board

**Description:** 275 pound Mullen burst test, double wall corrugated

**Primary dimension:** 275 lbs/sq.in. burst

**Secondary dimension:** Fibre Box Handbook: 100 lbs max weight per box

**Equivalence or compatibility note:** UPS maximum weight per box: 80 lbs

**Additional data:** UPS: 80 lbs

> 275# Double Wall | 100 lbs | 80 lbs

Source: <https://www.uline.com/Product/Detail/S-18339/Corrugated-Boxes-32-ECT/12-x-9-x-6-Lightweight-32-ECT-Corrugated-Boxes>


**Specification ID:** 275# Single Wall

**Specification type:** corrugated_board

**Description:** 275 lb. Mullen burst test, single wall corrugated

**Primary dimension:** 275 lbs/sq.in. burst

**Secondary dimension:** 95 lbs

**Equivalence or compatibility note:** 275# Mullen equivalent row

**Additional data:** UPS: 65 lbs

> 275# Single Wall | 95 lbs | 65 lbs |

Source: <https://www.uline.com/Product/Detail/S-4406/Corrugated-Boxes-200-Test/12-x-9-x-6-Corrugated-Boxes>

275# Single Wall — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** 275# Single Wall

**Specification type:** corrugated_board

**Description:** 275 pound Mullen burst test, single wall corrugated

**Primary dimension:** 275 lbs/sq.in. burst

**Secondary dimension:** Fibre Box Handbook: 95 lbs max weight per box

**Equivalence or compatibility note:** UPS maximum weight per box: 65 lbs

**Additional data:** UPS: 65 lbs

> 275# Single Wall | 95 lbs | 65 lbs

Source: <https://www.uline.com/Product/Detail/S-18339/Corrugated-Boxes-32-ECT/12-x-9-x-6-Lightweight-32-ECT-Corrugated-Boxes>


**Specification ID:** 28-400

**Specification type:** neck_finish

**Description:** 28 mm neck, 400 series (1 thread turn)

**Primary dimension:** T max 27.64 mm, T min 27.12 mm

**Secondary dimension:** E max 25.25 mm, E min 24.74 mm

**Equivalence or compatibility note:** 1 Thread turn

**Additional data:** 400H max 10.47 mm, 400H min 9.78 mm; S max 1.55 mm, S min 0.79 mm; I min 15.60 mm; 6 threads/in.

> 28 | 27.64 | 27.12 | 25.25 | 24.74 | 10.47 | 9.78 | 18.36 | 17.06 | 27.86 | 27.10 | 1.55 | 0.79 | 15.60 | 6

Source: <https://www.contapack.com.au/SPI-Neck-Finishes.html>

28-400 — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** 28-410 (glass)

**Specification type:** neck_finish

**Description:** 28 mm glass neck, 410 series (1.5 threaded turn), GPI standard

**Primary dimension:** T 1.076 +.012/-.013 in.

**Secondary dimension:** E 0.982 +.012/-.013 in.

**Equivalence or compatibility note:** 1.5 threaded turn

**Additional data:** H 0.698 +.013/-.012 in.; S 0.046 +.016/-.015 in.

> 28 | 1.076 +.012 / -.013 | 0.982 +.012 / -.013 | 0.698 +.013 / -.012 | 0.046 +.016 / -.015

Source: <https://evergreenresources.com/glass-neck-finish-dimensions/>

28-410 (glass) — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** 28-410

**Specification type:** neck_finish

**Description:** 28 mm neck, 410 series (1.5 thread turns)

**Primary dimension:** T max 27.64 mm, T min 27.12 mm

**Secondary dimension:** E max 25.25 mm, E min 24.74 mm

**Equivalence or compatibility note:** 1.5 Thread turns

**Additional data:** 410H max 18.36 mm, 410H min 17.06 mm; S max 1.55 mm, S min 0.79 mm; I min 15.60 mm; 6 threads/in.

> 28 | 27.64 | 27.12 | 25.25 | 24.74 | 10.47 | 9.78 | 18.36 | 17.06 | 27.86 | 27.10 | 1.55 | 0.79 | 15.60 | 6

Source: <https://www.contapack.com.au/SPI-Neck-Finishes.html>

28-410 — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** 28-415

**Specification type:** neck_finish

**Description:** 28 mm neck, 415 series (2 thread turns)

**Primary dimension:** T max 27.64 mm, T min 27.12 mm

**Secondary dimension:** E max 25.25 mm, E min 24.74 mm

**Equivalence or compatibility note:** 2 Thread turns

**Additional data:** 415H max 27.86 mm, 415H min 27.10 mm; S max 1.55 mm, S min 0.79 mm; I min 15.60 mm; 6 threads/in.

> 28 | 27.64 | 27.12 | 25.25 | 24.74 | 10.47 | 9.78 | 18.36 | 17.06 | 27.86 | 27.10 | 1.55 | 0.79 | 15.60 | 6

Source: <https://www.contapack.com.au/SPI-Neck-Finishes.html>

28-415 — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** 32 ECT Single Wall

**Specification type:** corrugated_board

**Description:** Edge Crush Test, single wall corrugated

**Primary dimension:** 32 lbs/linear inch ECT

**Secondary dimension:** 65 lbs

**Equivalence or compatibility note:** Recommended by UPS for shipping up to 30 lbs

**Additional data:** UPS: 30 lbs

> 32 ECT Single Wall | 65 lbs | 30 lbs |

Source: <https://www.uline.com/Product/Detail/S-4406/Corrugated-Boxes-200-Test/12-x-9-x-6-Corrugated-Boxes>

32 ECT Single Wall — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards

additional_data, dimension_1, equivalence_note, specification_type


**Specification ID:** 32 ECT Single Wall

**Specification type:** corrugated_board

**Description:** Edge crush test, single wall corrugated

**Primary dimension:** 32 lbs/linear inch ECT

**Secondary dimension:** Fibre Box Handbook: 65 lbs max weight per box

**Equivalence or compatibility note:** Recommended by UPS for shipping up to 30 lbs

**Additional data:** UPS: 30 lbs; 32 ECT boxes are up to 19% lighter than 200 lb. test

> 32 ECT Single Wall | 65 lbs | 30 lbs

Source: <https://www.uline.com/Product/Detail/S-18339/Corrugated-Boxes-32-ECT/12-x-9-x-6-Lightweight-32-ECT-Corrugated-Boxes>


**Specification ID:** 33-400

**Specification type:** neck_finish

**Description:** 33 mm neck, 400 series (1 thread turn)

**Primary dimension:** T max 32.14 mm, T min 31.52 mm

**Secondary dimension:** E max 29.74 mm, E min 29.14 mm

**Equivalence or compatibility note:** 1 Thread turn

**Additional data:** 400H max 10.62 mm, 400H min 9.86 mm; S max 1.55 mm, S min 0.79 mm; I min 20.10 mm; 6 threads/in.

> 33 | 32.14 | 31.52 | 29.74 | 29.14 | 10.62 | 9.86 | | | 33.00 | 32.00 | 1.55 | 0.79 | 20.10 | 6

Source: <https://www.contapack.com.au/SPI-Neck-Finishes.html>

33-400 — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** 33-415

**Specification type:** neck_finish

**Description:** 33 mm neck, 415 series (2 thread turns)

**Primary dimension:** T max 32.14 mm, T min 31.52 mm

**Secondary dimension:** E max 29.74 mm, E min 29.14 mm

**Equivalence or compatibility note:** 2 Thread turns

**Additional data:** 415H max 33.00 mm, 415H min 32.00 mm; S max 1.55 mm, S min 0.79 mm; I min 20.10 mm; 6 threads/in.

> 33 | 32.14 | 31.52 | 29.74 | 29.14 | 10.62 | 9.86 | | | 33.00 | 32.00 | 1.55 | 0.79 | 20.10 | 6

Source: <https://www.contapack.com.au/SPI-Neck-Finishes.html>

33-415 — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** 350# Double Wall

**Specification type:** corrugated_board

**Description:** 350 lb. Mullen burst test, double wall corrugated

**Primary dimension:** 350 lbs/sq.in. burst

**Secondary dimension:** 120 lbs

**Equivalence or compatibility note:** 350# Mullen equivalent row, double wall

**Additional data:** UPS: 100 lbs

> 350# Double Wall | 120 lbs | 100 lbs |

Source: <https://www.uline.com/Product/Detail/S-4406/Corrugated-Boxes-200-Test/12-x-9-x-6-Corrugated-Boxes>

350# Double Wall — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** 350# Double Wall

**Specification type:** corrugated_board

**Description:** 350 pound Mullen burst test, double wall corrugated

**Primary dimension:** 350 lbs/sq.in. burst

**Secondary dimension:** Fibre Box Handbook: 120 lbs max weight per box

**Equivalence or compatibility note:** UPS maximum weight per box: 100 lbs

**Additional data:** UPS: 100 lbs

> 350# Double Wall | 120 lbs | 100 lbs

Source: <https://www.uline.com/Product/Detail/S-18339/Corrugated-Boxes-32-ECT/12-x-9-x-6-Lightweight-32-ECT-Corrugated-Boxes>


**Specification ID:** 350# Single Wall

**Specification type:** corrugated_board

**Description:** 350 lb. Mullen burst test, single wall corrugated

**Primary dimension:** 350 lbs/sq.in. burst

**Secondary dimension:** 120 lbs

**Equivalence or compatibility note:** 350# Mullen equivalent row

**Additional data:** UPS: 80 lbs

> 350# Single Wall | 120 lbs | 80 lbs |

Source: <https://www.uline.com/Product/Detail/S-4406/Corrugated-Boxes-200-Test/12-x-9-x-6-Corrugated-Boxes>

350# Single Wall — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** 350# Single Wall

**Specification type:** corrugated_board

**Description:** 350 pound Mullen burst test, single wall corrugated

**Primary dimension:** 350 lbs/sq.in. burst

**Secondary dimension:** Fibre Box Handbook: 120 lbs max weight per box

**Equivalence or compatibility note:** UPS maximum weight per box: 80 lbs

**Additional data:** UPS: 80 lbs

> 350# Single Wall | 120 lbs | 80 lbs

Source: <https://www.uline.com/Product/Detail/S-18339/Corrugated-Boxes-32-ECT/12-x-9-x-6-Lightweight-32-ECT-Corrugated-Boxes>


**Specification ID:** 38-400

**Specification type:** neck_finish

**Description:** 38 mm neck, 400 series (1 thread turn)

**Primary dimension:** T max 37.50 mm, T min 36.88 mm

**Secondary dimension:** E max 35.10 mm, E min 34.50 mm

**Equivalence or compatibility note:** 1 Thread turn

**Additional data:** 400H max 10.62 mm, 400H min 9.86 mm; S max 1.55 mm, S min 0.79 mm; I min 17.45 mm; 6 threads/in.

> 38 | 37.50 | 36.88 | 35.10 | 34.50 | 10.62 | 9.86 | | | | | 1.55 | 0.79 | 17.45 | 6

Source: <https://www.contapack.com.au/SPI-Neck-Finishes.html>

38-400 — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** 40-400

**Specification type:** neck_finish

**Description:** 40 mm neck, 400 series (1 thread turn)

**Primary dimension:** T max 40.13 mm, T min 39.37 mm

**Secondary dimension:** E max 37.75 mm, E min 36.00 mm

**Equivalence or compatibility note:** 1 Thread turn

**Additional data:** 400H max 10.62 mm, 400H min 9.86 mm; S max 1.55 mm, S min 0.79 mm; I min 27.70 mm; 6 threads/in.

> 40 | 40.13 | 39.37 | 37.75 | 36.00 | 10.62 | 9.86 | | | | | 1.55 | 0.79 | 27.70 | 6

Source: <https://www.contapack.com.au/SPI-Neck-Finishes.html>

40-400 — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** 400 series

**Specification type:** neck_finish

**Description:** Short (standard) finish, single-turn continuous thread

**Primary dimension:** Short height

**Secondary dimension:** Single-turn continuous thread

**Equivalence or compatibility note:** Most common finish for food, beverage, and personal care bottles

**Additional data:** General-purpose screw caps

> 400 | Short (standard) | Single-turn continuous thread | General-purpose screw caps | Most common finish for food, beverage, and personal care bottles.

Source: <https://evergreenresources.com/plastic-bottle-neck-finishes/>

400 series — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** 410 series

**Specification type:** neck_finish

**Description:** Medium height finish, fine thread with slightly taller finish

**Primary dimension:** Medium height

**Secondary dimension:** Fine thread with slightly taller finish

**Equivalence or compatibility note:** Allows more secure engagement and improved sealing torque

**Additional data:** Dispensing closures, pumps, and flip-tops

> 410 | Medium height | Fine thread with slightly taller finish | Dispensing closures, pumps, and flip-tops | Allows more secure engagement and improved sealing torque.

Source: <https://evergreenresources.com/plastic-bottle-neck-finishes/>

410 series — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** 415 series

**Specification type:** neck_finish

**Description:** Tall finish, extended thread height

**Primary dimension:** Tall finish

**Secondary dimension:** Extended thread height

**Equivalence or compatibility note:** Provides additional room for actuator components

**Additional data:** Fine-mist sprayers, droppers

> 415 | Tall finish | Extended thread height | Fine-mist sprayers, droppers | Provides additional room for actuator components.

Source: <https://evergreenresources.com/plastic-bottle-neck-finishes/>

415 series — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** 425 series

**Specification type:** neck_finish

**Description:** Extra tall finish, multi-thread or custom sealing bead

**Primary dimension:** Extra tall

**Secondary dimension:** Multi-thread or custom sealing bead

**Equivalence or compatibility note:** Designed for precision applications needing higher neck engagement

**Additional data:** Pharmaceutical and laboratory bottles

> 425 | Extra tall | Multi-thread or custom sealing bead | Pharmaceutical and laboratory bottles | Designed for precision applications needing higher neck engagement.

Source: <https://evergreenresources.com/plastic-bottle-neck-finishes/>

425 series — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** 43-400

**Specification type:** neck_finish

**Description:** 43 mm neck, 400 series (1 thread turn)

**Primary dimension:** T max 42.00 mm, T min 41.25 mm

**Secondary dimension:** E max 39.62 mm, E min 38.86 mm

**Equivalence or compatibility note:** 1 Thread turn

**Additional data:** 400H max 10.62 mm, 400H min 9.86 mm; S max 1.55 mm, S min 0.79 mm; I min 29.60 mm; 6 threads/in.

> 43 | 42.00 | 41.25 | 39.62 | 38.86 | 10.62 | 9.86 | | | | | 1.55 | 0.79 | 29.60 | 6

Source: <https://www.contapack.com.au/SPI-Neck-Finishes.html>

43-400 — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** 439/440 series

**Specification type:** neck_finish

**Description:** Deep-thread, heavy-duty finish, coarse thread or modified CT

**Primary dimension:** Deep-thread, heavy-duty

**Secondary dimension:** Coarse thread or modified CT

**Equivalence or compatibility note:** Ensures robust sealing and durability for repeated use

**Additional data:** Industrial containers, thick liquids

> 439 / 440 series | Deep-thread, heavy-duty | Coarse thread or modified CT | Industrial containers, thick liquids | Ensures robust sealing and durability for repeated use.

Source: <https://evergreenresources.com/plastic-bottle-neck-finishes/>

439/440 series — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** 48-400

**Specification type:** neck_finish

**Description:** 48 mm neck, 400 series (1 thread turn)

**Primary dimension:** T max 47.50 mm, T min 46.74 mm

**Secondary dimension:** E max 45.11 mm, E min 44.35 mm

**Equivalence or compatibility note:** 1 Thread turn

**Additional data:** 400H max 10.62 mm, 400H min 9.86 mm; S max 1.55 mm, S min 0.79 mm; I min 35.10 mm; 6 threads/in.

> 48 | 47.50 | 46.74 | 45.11 | 44.35 | 10.62 | 9.86 | | | | | 1.55 | 0.79 | 35.10 | 6

Source: <https://www.contapack.com.au/SPI-Neck-Finishes.html>

48-400 — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** 500# Double Wall

**Specification type:** corrugated_board

**Description:** 500 lb. Mullen burst test, double wall corrugated

**Primary dimension:** 500 lbs/sq.in. burst

**Secondary dimension:** 160 lbs

**Equivalence or compatibility note:** 500# Mullen equivalent row, double wall

**Additional data:** UPS: 140 lbs

> 500# Double Wall | 160 lbs | 140 lbs |

Source: <https://www.uline.com/Product/Detail/S-4406/Corrugated-Boxes-200-Test/12-x-9-x-6-Corrugated-Boxes>

500# Double Wall — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** 500# Double Wall

**Specification type:** corrugated_board

**Description:** 500 pound Mullen burst test, double wall corrugated

**Primary dimension:** 500 lbs/sq.in. burst

**Secondary dimension:** Fibre Box Handbook: 160 lbs max weight per box

**Equivalence or compatibility note:** UPS maximum weight per box: 140 lbs

**Additional data:** UPS: 140 lbs

> 500# Double Wall | 160 lbs | 140 lbs

Source: <https://www.uline.com/Product/Detail/S-18339/Corrugated-Boxes-32-ECT/12-x-9-x-6-Lightweight-32-ECT-Corrugated-Boxes>


**Specification ID:** 51-400

**Specification type:** neck_finish

**Description:** 51 mm neck, 400 series (1 thread turn)

**Primary dimension:** T max 50.00 mm, T min 49.10 mm

**Secondary dimension:** E max 47.60 mm, E min 46.71 mm

**Equivalence or compatibility note:** 1 Thread turn

**Additional data:** 400H max 10.75 mm, 400H min 10.00 mm; S max 1.55 mm, S min 0.79 mm; I min 37.60 mm; 6 threads/in.

> 51 | 50.00 | 49.10 | 47.60 | 46.71 | 10.75 | 10.00 | | | | | 1.55 | 0.79 | 37.60 | 6

Source: <https://www.contapack.com.au/SPI-Neck-Finishes.html>

51-400 — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** 53-400

**Specification type:** neck_finish

**Description:** 53 mm neck, 400 series (1 thread turn)

**Primary dimension:** T max 52.50 mm, T min 51.61 mm

**Secondary dimension:** E max 50.11 mm, E min 49.23 mm

**Equivalence or compatibility note:** 1 Thread turn

**Additional data:** 400H max 10.75 mm, 400H min 10.00 mm; S max 1.55 mm, S min 0.79 mm; I min 40.10 mm; 6 threads/in.

> 53 | 52.50 | 51.61 | 50.11 | 49.23 | 10.75 | 10.00 | | | | | 1.55 | 0.79 | 40.10 | 6

Source: <https://www.contapack.com.au/SPI-Neck-Finishes.html>

53-400 — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** 58-400

**Specification type:** neck_finish

**Description:** 58 mm neck, 400 series (1 thread turn)

**Primary dimension:** T max 56.50 mm, T min 55.60 mm

**Secondary dimension:** E max 54.10 mm, E min 53.22 mm

**Equivalence or compatibility note:** 1 Thread turn

**Additional data:** 400H max 10.75 mm, 400H min 10.00 mm; S max 1.55 mm, S min 0.79 mm; I min 44.10 mm; 6 threads/in.

> 58 | 56.50 | 55.60 | 54.10 | 53.22 | 10.75 | 10.00 | | | | | 1.55 | 0.79 | 44.10 | 6

Source: <https://www.contapack.com.au/SPI-Neck-Finishes.html>

58-400 — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** 60-400

**Specification type:** neck_finish

**Description:** 60 mm neck, 400 series (1 thread turn)

**Primary dimension:** T max 59.50 mm, T min 58.60 mm

**Secondary dimension:** E max 57.10 mm, E min 56.21 mm

**Equivalence or compatibility note:** 1 Thread turn

**Additional data:** 400H max 10.75 mm, 400H min 10.00 mm; S max 1.55 mm, S min 0.79 mm; I min 47.00 mm; 6 threads/in.

> 60 | 59.50 | 58.60 | 57.10 | 56.21 | 10.75 | 10.00 | | | | | 1.55 | 0.79 | 47.00 | 6

Source: <https://www.contapack.com.au/SPI-Neck-Finishes.html>

60-400 — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** 63-400

**Specification type:** neck_finish

**Description:** 63 mm neck, 400 series (1 thread turn)

**Primary dimension:** T max 62.51 mm, T min 61.62 mm

**Secondary dimension:** E max 60.12 mm, E min 59.23 mm

**Equivalence or compatibility note:** 1 Thread turn

**Additional data:** 400H max 10.75 mm, 400H min 10.00 mm; S max 1.55 mm, S min 0.79 mm; I min 50.00 mm; 6 threads/in.

> 63 | 62.51 | 61.62 | 60.12 | 59.23 | 10.75 | 10.00 | | | | | 1.55 | 0.79 | 50.00 | 6

Source: <https://www.contapack.com.au/SPI-Neck-Finishes.html>

63-400 — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** 70-400

**Specification type:** neck_finish

**Description:** 70 mm neck, 400 series (1 thread turn)

**Primary dimension:** T max 69.50 mm, T min 68.60 mm

**Secondary dimension:** E max 67.00 mm, E min 66.22 mm

**Equivalence or compatibility note:** 1 Thread turn

**Additional data:** 400H max 10.75 mm, 400H min 10.00 mm; S max 1.55 mm, S min 0.79 mm; I min 57.00 mm; 6 threads/in.

> 70 | 69.50 | 68.60 | 67.00 | 66.22 | 10.75 | 10.00 | | | | | 1.55 | 0.79 | 57.00 | 6

Source: <https://www.contapack.com.au/SPI-Neck-Finishes.html>

70-400 — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** 75-400

**Specification type:** neck_finish

**Description:** 75 mm neck, 400 series (1 thread turn)

**Primary dimension:** T max 74.00 mm, T min 73.10 mm

**Secondary dimension:** E max 71.60 mm, E min 70.71 mm

**Equivalence or compatibility note:** 1 Thread turn

**Additional data:** 400H max 10.75 mm, 400H min 10.00 mm; S max 1.55 mm, S min 0.79 mm; I min 61.50 mm; 6 threads/in.

> 75 | 74.00 | 73.10 | 71.60 | 70.71 | 10.75 | 10.00 | | | | | 1.55 | 0.79 | 61.50 | 6

Source: <https://www.contapack.com.au/SPI-Neck-Finishes.html>

75-400 — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** 77-400

**Specification type:** neck_finish

**Description:** 77 mm neck, 400 series (1 thread turn)

**Primary dimension:** T max 77.10 mm, T min 76.20 mm

**Secondary dimension:** E max 74.70 mm, E min 73.81 mm

**Equivalence or compatibility note:** 1 Thread turn

**Additional data:** 400H max 12.75 mm, 400H min 12.00 mm; S max 1.90 mm, S min 1.14 mm; I min 64.70 mm; 6 threads/in.

> 77 | 77.10 | 76.20 | 74.70 | 73.81 | 12.75 | 12.00 | | | | | 1.90 | 1.14 | 64.70 | 6

Source: <https://www.contapack.com.au/SPI-Neck-Finishes.html>

77-400 — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** 83-400

**Specification type:** neck_finish

**Description:** 83 mm neck, 400 series (1 thread turn)

**Primary dimension:** T max 83.00 mm, T min 82.12 mm

**Secondary dimension:** E max 80.00 mm, E min 79.07 mm

**Equivalence or compatibility note:** 1 Thread turn

**Additional data:** 400H max 12.75 mm, 400H min 12.00 mm; S max 1.90 mm, S min 1.14 mm; I min 70.00 mm; 5 threads/in.

> 83 | 83.00 | 82.12 | 80.00 | 79.07 | 12.75 | 12.00 | | | | | 1.90 | 1.14 | 70.00 | 5

Source: <https://www.contapack.com.au/SPI-Neck-Finishes.html>

83-400 — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** 89-400

**Specification type:** neck_finish

**Description:** 89 mm neck, 400 series (1 thread turn)

**Primary dimension:** T max 89.18 mm, T min 88.30 mm

**Secondary dimension:** E max 86.12 mm, E min 85.24 mm

**Equivalence or compatibility note:** 1 Thread turn

**Additional data:** 400H max 14.00 mm, 400H min 13.20 mm; S max 1.90 mm, S min 1.14 mm; I min 74.10 mm; 5 threads/in.

> 89 | 89.18 | 88.30 | 86.12 | 85.24 | 14.00 | 13.20 | | | | | 1.90 | 1.14 | 74.10 | 5

Source: <https://www.contapack.com.au/SPI-Neck-Finishes.html>

89-400 — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** EUR 1 (specifications)

**Specification type:** pallet

**Description:** Euro pallet dimensional and load specifications

**Primary dimension:** Length 1200 mm (tolerance limit + 8/-5)

**Secondary dimension:** Width 800 mm (tolerance limit + 8/-5)

**Equivalence or compatibility note:** Height 144 mm (tolerance limit + 10/-0)

**Additional data:** Weight: approximately 25kg; Workload: 1500kg with a constant load on the entire pallet; Top board width 22 by 25 mm; Bottom board width 22 to 24 mm

> Euro pallet Dimensions: Length 1200 mmm (tolerance limit + 8/-5); Width 800mm (tolerance limit + 8/- 5x mm); Height 144mm (tolerance limit + 10/ - 0x mm).

Source: <https://www.icontainers.com/help/euro-pallet-epal-sizes-specifications/>

EUR 1 (specifications) — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards

additional_data, dimension_1, dimension_2, specification_description, specification_id


**Specification ID:** EUR 1

**Specification type:** pallet

**Description:** Standard European pallet, four-way block pallet made of wood, nailed with 78 special nails

**Primary dimension:** 800 mm x 1,200 mm

**Secondary dimension:** 144 mm height

**Equivalence or compatibility note:** ISO1, same size as EUR

**Additional data:** Weight approximately 25 kg; safe working load 1,500 kg; maximum additional load up to 4,000 kg when stacking; equally loaded limit 1,500 kg, otherwise 1,000 kg

> EUR or EUR 1 | 800 mm × 1,200 mm | 31.50 in × 47.24 in | ISO1, same size as EUR

Source: <https://en.wikipedia.org/wiki/EUR-pallet>

EUR 1 — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards

additional_data, dimension_1, dimension_2, specification_description, specification_type


**Specification ID:** EUR 2

**Specification type:** pallet

**Description:** European pallet type 2, close to standard American pallet

**Primary dimension:** 1,200 mm x 1,000 mm

**Secondary dimension:** 47.24 in x 39.37 in

**Equivalence or compatibility note:** ISO2

**Additional data:** Close to the standard American pallet type of 40 in × 48 in (1,016 mm × 1,219 mm)

> EUR 2 | 1,200 mm × 1,000 mm | 47.24 in × 39.37 in | ISO2

Source: <https://en.wikipedia.org/wiki/EUR-pallet>

EUR 2 — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** EUR 3

**Specification type:** pallet

**Description:** European pallet type 3

**Primary dimension:** 1,000 mm x 1,200 mm

**Secondary dimension:** 39.37 in x 47.24 in

**Equivalence or compatibility note:** No ISO alternative listed

> EUR 3 | 1,000 mm × 1,200 mm | 39.37 in × 47.24 in

Source: <https://en.wikipedia.org/wiki/EUR-pallet>

EUR 3 — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards

dimension_1, dimension_2, equivalence_note, specification_description, specification_type


**Specification ID:** EUR 6

**Specification type:** pallet

**Description:** Half-size European pallet for retail use

**Primary dimension:** 800 mm x 600 mm

**Secondary dimension:** 31.50 in x 23.62 in

**Equivalence or compatibility note:** ISO0, half the size of EUR

> EUR 6 | 800 mm × 600 mm | 31.50 in × 23.62 in | ISO0, half the size of EUR

Source: <https://en.wikipedia.org/wiki/EUR-pallet>

EUR 6 — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards

dimension_1, dimension_2, specification_description, specification_type


**Specification ID:** GME12.01 - Glass finishes for snap-on pourer closures (Verplast)

**Specification type:** neck_finish

**Description:** Dimensions of the glass finish for pouring clip-on cap finish (so-called Verplast) of diameter 29 and 32 for still liquids.

**Primary dimension:** 29 and 32 mm diameter

**Equivalence or compatibility note:** Snap-on pourer closures (Verplast) for still liquids

**Additional data:** For oils, cordials, sauces, vinegar

> the glass finish for pouring clip-on cap finish (so-called Verplast

Source: <https://www.cetie.org/en/finish-data-sheets-gme_102.html>

GME12.01 - Glass finishes for snap-on pourer closures (Verplast) — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards

additional_data, dimension_1, equivalence_note, specification_description, specification_id, specification_type


**Specification ID:** GME12.10 - Finish for swing stopper

**Specification type:** neck_finish

**Description:** Applies to punched neck finishes developed preferably for packaging made of glass and provided with a swing stopper.

**Equivalence or compatibility note:** Punched neck finish for swing stopper on glass packaging

> punched neck finishes which have been developed preferably for packaging made of glass and which are provided with a swing stopper

Source: <https://www.cetie.org/en/finish-data-sheets-gme_102.html>

GME12.10 - Finish for swing stopper — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** GME13.01 - 26H180 Crown finish

**Specification type:** neck_finish

**Description:** Specifications and dimensions of the 26 mm tall crown finish for glass bottles containing beverages.

**Primary dimension:** 26 mm diameter

**Secondary dimension:** H 180 mm tall

**Equivalence or compatibility note:** Crown finish for glass bottles, designed to take a crown closure

> See detail GME13.01 - 26H180 Crown finish - Latest update 01/06/2007 Specifications and dimensions of the 26 mm tall crown finish for glass bottles containing beverages.

Source: <https://www.cetie.org/en/finish-data-sheets-gme_102.html>

GME13.01 - 26H180 Crown finish — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** GME13.02 - 26H126 Crown finish

**Specification type:** neck_finish

**Description:** Specifications and dimensions of the 26 mm shallow crown finish for glass bottles containing beverages.

**Primary dimension:** 26 mm diameter

**Secondary dimension:** H 126 mm shallow

**Equivalence or compatibility note:** Shallow crown finish for glass bottles

> See detail GME13.02 - 26H126 Crown finish 01/06/2007 Specifications and dimensions of the 26 mm shallow crown finish for glass bottles containing beverages.

Source: <https://www.cetie.org/en/finish-data-sheets-gme_102.html>

GME13.02 - 26H126 Crown finish — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** GME13.04 - 29mm sparkling wine finish

**Specification type:** neck_finish

**Description:** Dimensions and specifications of the 29 mm glass finish for bottles intended for sparkling wine produced by a closed tank method. This finish is designed to take a natural cork or synthetic cork stopper.

**Primary dimension:** 29 mm diameter

**Equivalence or compatibility note:** Designed to take a natural cork or synthetic cork stopper

**Additional data:** For sparkling wine produced by a closed tank method

> See detail GME13.04 - 29mm sparkling wine finish 01/10/1998 - Latest update 19/01/2024 This data sheet gives dimensions and specifications of the 29 mm glass finish for bottles intended for sparkling wine produced by a closed tank method. This finish is designed to take a natural cork or synthetic cork stopper.

Source: <https://www.cetie.org/en/finish-data-sheets-gme_102.html>

GME13.04 - 29mm sparkling wine finish — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** GME13.05 - 29mm Spumante crown finish

**Specification type:** neck_finish

**Description:** Dimensions and specifications of the 29 mm crown finish for glass bottles intended for Spumante-type sparkling wines. This finish is designed to take a crown closure or a cork closure in natural cork or synthetic material.

**Primary dimension:** 29 mm diameter

**Equivalence or compatibility note:** Designed to take a crown closure or a cork closure in natural cork or synthetic material

**Additional data:** For Spumante-type sparkling wines

> See detail GME13.05 - 29mm Spumante crown finish 01/10/1998 - Latest update 19/01/2024 This data sheet gives dimensions and specifications of the 29 mm crown finish for glass bottles intended for Spumante-type sparkling wines. This finish is designed to take a crown closure or a cork closure in natural cork or synthetic material.

Source: <https://www.cetie.org/en/finish-data-sheets-gme_102.html>

GME13.05 - 29mm Spumante crown finish — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** GME13.06 - 29mm cider crown finish

**Specification type:** neck_finish

**Description:** Dimensions and specifications of the 29 mm crown finish for glass bottles intended for cider. This finish is designed to take a crown closure or a cork closure in natural cork or synthetic material.

**Primary dimension:** 29 mm diameter

**Equivalence or compatibility note:** Designed to take a crown closure or a cork closure in natural cork or synthetic material

**Additional data:** For cider

> This finish is designed to take a crown closure or a cork closure in natural cork or synthetic material. See detail GME13.06 - 29mm cider crown finish 01/10/1998 - Latest update 19/01/2024 This data sheet gives dimensions and specifications of the 29 mm crown finish for glass bottles intended for cider. This finish is designed to take a crown closure or a cork closure in natural cork or synthetic material.

Source: <https://www.cetie.org/en/finish-data-sheets-gme_102.html>

GME13.06 - 29mm cider crown finish — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** GME13.08 - Traditional method sparkling wine finishes (26, 29 and 36 mm)

**Specification type:** neck_finish

**Description:** Dimensions and specifications of the glass finishes for bottles intended for sparkling wine produced by the Traditional method, with a diameter of 26, 29 or 36 mm. The finish is to receive a crown cap and a cork stopper.

**Primary dimension:** 26, 29 or 36 mm diameter

**Equivalence or compatibility note:** The finish is to receive a crown cap and a cork stopper

**Additional data:** For sparkling wine produced by the Traditional method

> See detail GME13.08 - Traditional method sparkling wine finishes (26, 29 and 36 mm) 12/01/2018 - Latest update 24/10/2024 This data sheet gives dimensions and specifications of the glass finishes for bottles intended for sparkling wine produced by the “Traditional method”, with a diameter of 26, 29 or 36 mm. The finish is to receive a crown cap and a cork stopper.

Source: <https://www.cetie.org/en/finish-data-sheets-gme_102.html>

GME13.08 - Traditional method sparkling wine finishes (26, 29 and 36 mm) — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** GME14.00 - 26H126 & 26H180 twist crown finishes

**Specification type:** neck_finish

**Description:** Dimensions of the twist crown finishes for glass bottles. 26 H 126 mm shallow, 26 H 180 mm tall.

**Primary dimension:** 26 mm diameter

**Secondary dimension:** H 126 mm shallow / H 180 mm tall

**Equivalence or compatibility note:** Designed to use an adapted metal crown cap

**Additional data:** Two variants: 26 H 126 mm shallow and 26 H 180 mm tall

> See detail GME14.00 - 26H126 & 26H180 twist crown finishes - Dimensions 01/08/2022 - Latest update 05/10/2023 This data sheet specifies the dimensions of the twist crown finishes for glass bottles. 26 H 126 mm shallow 26 H 180 mm tall The twist crown finishes are designed to use an adapted metal crown cap (see e.g. EN 17177 - GLASS PACKAGING - CROWN CAP - 26 mm DIAMETER, 6 mm HEIGHT ...

Source: <https://www.cetie.org/en/finish-data-sheets-gme_102.html>

GME14.00 - 26H126 & 26H180 twist crown finishes — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** GME14.11 - 26H180 twist crown finish - Reduced bore

**Specification type:** neck_finish

**Description:** Specifications and dimensions of the 26 H 180 mm tall twist crown finish for glass bottles with a bore reduced from 19,8 mm ±0,3 mm to 19,1 mm ±0,3 mm.

**Primary dimension:** 26 mm diameter, H 180 mm tall

**Secondary dimension:** Bore 19,1 mm ±0,3 mm (reduced from 19,8 mm ±0,3 mm)

**Equivalence or compatibility note:** This finish with reduced bore should be used with prior mutual agreement

**Additional data:** Bore reduced from 19,8 mm ±0,3 mm to 19,1 mm ±0,3 mm

> See detail GME14.11 - 26H180 twist crown finish - Reduced bore 11/01/2018 - Latest update 24/01/2025 This data sheet provides specifications and dimensions of the 26 H 180 mm tall twist crown finish for glass bottles with a bore reduced from 19,8 mm ±0,3 mm to 19,1 mm ±0,3 mm. This finish with reduced bore should be used with prior mutual agreement ...

Source: <https://www.cetie.org/en/finish-data-sheets-gme_102.html>

GME14.11 - 26H180 twist crown finish - Reduced bore — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** GME14.12 - 26 h 126 twist crown finish - Reduced bore

**Specification type:** neck_finish

**Description:** Specifications and dimensions of the 26 H 126 mm shallow twist crown finish for glass bottles with a bore reduced from 19,8 mm to 19,1 mm.

**Primary dimension:** 26 mm diameter, H 126 mm shallow

**Secondary dimension:** Bore 19,1 mm (reduced from 19,8 mm)

**Equivalence or compatibility note:** This finish with reduced bore should be used with prior mutual agreement

**Additional data:** Bore reduced from 19,8 mm to 19,1 mm

> GME14.12 - 26 h 126 twist crown finish - Reduced bore

Source: <https://www.cetie.org/en/finish-data-sheets-gme_102.html>

GME14.12 - 26 h 126 twist crown finish - Reduced bore — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards

additional_data, dimension_1, dimension_2, equivalence_note, specification_description


**Specification ID:** GME20.00.10 - Vacuum lug finish ø 27 regular

**Specification type:** neck_finish

**Description:** Dimensions of a vacuum lug finish with a nominal size of 27 mm medium for wide-mouth glass containers.

**Primary dimension:** 27 mm nominal size

**Equivalence or compatibility note:** Regular depth vacuum lug finish for wide-mouth glass containers

> See detail GME20.00.10 - Vacuum lug finish ø 27 regular 01/07/2003 This data sheet specifies the dimensions of a vacuum lug finish with a nominal size of 27 mm medium for wide-mouth glass containers.

Source: <https://www.cetie.org/en/finish-data-sheets-gme_102.html>

GME20.00.10 - Vacuum lug finish ø 27 regular — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** GME20.00.20 - Vacuum lug finish 30 and 33 medium

**Specification type:** neck_finish

**Description:** Dimensions of a vacuum lug finish with a nominal size of 30 et 33 mm medium for wide-mouth glass containers.

**Primary dimension:** 30 and 33 mm nominal size

**Equivalence or compatibility note:** Medium depth vacuum lug finish for wide-mouth glass containers

> a vacuum lug finish with a nominal size of 30 et 33 mm medium for wide-mouth glass containers

Source: <https://www.cetie.org/en/finish-data-sheets-gme_102.html>

GME20.00.20 - Vacuum lug finish 30 and 33 medium — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** GME20.00 - Vacuum lug finish ø 33 medium

**Specification type:** neck_finish

**Description:** Dimensions of a vacuum lug finish with a nominal size of 33 mm medium for wide-mouth glass containers.

**Primary dimension:** 33 mm nominal size

**Equivalence or compatibility note:** Medium depth vacuum lug finish for wide-mouth glass containers

> See detail GME20.00 - Vacuum lug finish ø 33 medium 01/01/1995 This data sheet specifies the dimensions of a vacuum lug finish with a nominal size of 33 mm medium for wide-mouth glass containers.

Source: <https://www.cetie.org/en/finish-data-sheets-gme_102.html>

GME20.00 - Vacuum lug finish ø 33 medium — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** GME20.01 - Vacuum lug finish Ø 27 and Ø 38 regular

**Specification type:** neck_finish

**Description:** Dimensions of a vacuum lug finish with a nominal size of 38 mm regular for wide-mouth glass containers.

**Primary dimension:** 27 and 38 mm nominal size

**Equivalence or compatibility note:** Regular depth vacuum lug finish for wide-mouth glass containers

> See detail GME20.01 - Vacuum lug finish Ø 27 and Ø 38 regular 01/01/1995 This data sheet specifies the dimensions of a vacuum lug finish with a nominal size of 38 mm regular for wide-mouth glass containers.

Source: <https://www.cetie.org/en/finish-data-sheets-gme_102.html>

GME20.01 - Vacuum lug finish Ø 27 and Ø 38 regular — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** GME20.02 - Vacuum lug finish Ø 38 medium

**Specification type:** neck_finish

**Description:** Dimensions of a vacuum lug finish with a nominal size of 38 mm medium for wide-mouth glass containers.

**Primary dimension:** 38 mm nominal size

**Equivalence or compatibility note:** Medium depth vacuum lug finish for wide-mouth glass containers

> See detail GME20.02 - Vacuum lug finish Ø 38 medium 01/01/1995 This data sheet specifies the dimensions of a vacuum lug finish with a nominal size of 38 mm medium for wide-mouth glass containers.

Source: <https://www.cetie.org/en/finish-data-sheets-gme_102.html>

GME20.02 - Vacuum lug finish Ø 38 medium — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** GME20.03 - Vacuum lug finish Ø 43 and Ø 48 regular

**Specification type:** neck_finish

**Description:** Dimensions of vacuum lug finishes with a nominal size of 43 mm and 48 mm regular for wide-mouth glass containers.

**Primary dimension:** 43 and 48 mm nominal size

**Equivalence or compatibility note:** Regular depth vacuum lug finish for wide-mouth glass containers

> See detail GME20.03 - Vacuum lug finish Ø 43 and Ø 48 regular 01/01/1995 This data sheet specifies the dimensions of vacuum lug finishes with a nominal size of 43 mm and 48 mm regular for wide-mouth glass containers.

Source: <https://www.cetie.org/en/finish-data-sheets-gme_102.html>

GME20.03 - Vacuum lug finish Ø 43 and Ø 48 regular — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** GME20.04 - Vacuum lug finish ø 53 and ø 58 regular

**Specification type:** neck_finish

**Description:** Dimensions of vacuum lug finishes with nominal sizes of 53 mm and 58 mm regular for wide-mouth glass containers.

**Primary dimension:** 53 and 58 mm nominal size

**Equivalence or compatibility note:** Regular depth vacuum lug finish for wide-mouth glass containers

> See detail GME20.04 - Vacuum lug finish ø 53 and ø 58 regular 01/01/1995 This document specifies the dimensions of vacuum lug finishes with nominal sizes of 53 mm and 58 mm regular for wide-mouth glass containers.

Source: <https://www.cetie.org/en/finish-data-sheets-gme_102.html>

GME20.04 - Vacuum lug finish ø 53 and ø 58 regular — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** GME20.05 - Vacuum lug finish Ø 58 deep

**Specification type:** neck_finish

**Description:** Dimensions of a vacuum lug finish with a nominal size of 58 mm deep for wide-mouth glass containers.

**Primary dimension:** 58 mm nominal size

**Equivalence or compatibility note:** Deep vacuum lug finish for wide-mouth glass containers

> See detail GME20.05 - Vacuum lug finish Ø 58 deep 01/01/1995 This document specifies the dimensions of a vacuum lug finish with a nominal size of 58 mm deep for wide-mouth glass containers.

Source: <https://www.cetie.org/en/finish-data-sheets-gme_102.html>

GME20.05 - Vacuum lug finish Ø 58 deep — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** GME20.06 - Vacuum lug finish 63, 66, 70 regular

**Specification type:** neck_finish

**Description:** Dimensions of vacuum lug finishes with nominal sizes of 63, 66 and 70 mm regular for wide-mouth glass containers.

**Primary dimension:** 63, 66 and 70 mm nominal size

**Equivalence or compatibility note:** Regular depth vacuum lug finish for wide-mouth glass containers

> vacuum lug finishes with nominal sizes of 63, 66 and 70 mm regular for wide-mouth glass containers

Source: <https://www.cetie.org/en/finish-data-sheets-gme_102.html>

GME20.06 - Vacuum lug finish 63, 66, 70 regular — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** GME20.07 - Vacuum lug finish 63, 66, 70 deep

**Specification type:** neck_finish

**Description:** Dimensions of vacuum lug finishes with nominal sizes of 63, 66 and 70 mm deep for wide-mouth glass containers.

**Primary dimension:** 63, 66 and 70 mm nominal size

**Equivalence or compatibility note:** Deep vacuum lug finish for wide-mouth glass containers

> vacuum lug finishes with nominal sizes of 63, 66 and 70 mm deep for wide-mouth glass containers

Source: <https://www.cetie.org/en/finish-data-sheets-gme_102.html>

GME20.07 - Vacuum lug finish 63, 66, 70 deep — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** GME20.08 - Vacuum lug finish Ø 77 regular

**Specification type:** neck_finish

**Description:** Dimensions of a vacuum lug finish with a nominal size of 77 mm regular for wide-mouth glass containers.

**Primary dimension:** 77 mm nominal size

**Equivalence or compatibility note:** Regular depth vacuum lug finish for wide-mouth glass containers

> See detail GME20.08 - Vacuum lug finish Ø 77 regular 01/01/1995 This document specifies the dimensions of a vacuum lug finish with a nominal size of 77 mm regular for wide-mouth glass containers.

Source: <https://www.cetie.org/en/finish-data-sheets-gme_102.html>

GME20.08 - Vacuum lug finish Ø 77 regular — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** GME20.09 - Vacuum lug finish Ø 82 regular

**Specification type:** neck_finish

**Description:** Dimensions of a vacuum lug finish with a nominal size of 82 mm regular for wide-mouth glass containers.

**Primary dimension:** 82 mm nominal size

**Equivalence or compatibility note:** Regular depth vacuum lug finish for wide-mouth glass containers

> See detail GME20.09 - Vacuum lug finish Ø 82 regular 01/01/1995 This document specifies the dimensions of a vacuum lug finish with a nominal size of 82 mm regular for wide-mouth glass containers.

Source: <https://www.cetie.org/en/finish-data-sheets-gme_102.html>

GME20.09 - Vacuum lug finish Ø 82 regular — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** GME20.10 - Vacuum lug finish Ø 89 regular

**Specification type:** neck_finish

**Description:** Dimensions of a vacuum lug finish with a nominal size of 89 mm regular for wide-mouth glass containers.

**Primary dimension:** 89 mm nominal size

**Equivalence or compatibility note:** Regular depth vacuum lug finish for wide-mouth glass containers

> See detail GME20.10 - Vacuum lug finish Ø 89 regular 01/01/1995 This document specifies the dimensions of a vacuum lug finish with a nominal size of 89 mm regular for wide-mouth glass containers.

Source: <https://www.cetie.org/en/finish-data-sheets-gme_102.html>

GME20.10 - Vacuum lug finish Ø 89 regular — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** GME20.11 - Vacuum lug finish Ø 100 regular

**Specification type:** neck_finish

**Description:** Dimensions of a vacuum lug finish with a nominal size of 100 mm regular for wide-mouth glass containers.

**Primary dimension:** 100 mm nominal size

**Equivalence or compatibility note:** Regular depth vacuum lug finish for wide-mouth glass containers

> See detail GME20.11 - Vacuum lug finish Ø 100 regular 01/01/1995 This document specifies the dimensions of a vacuum lug finish with a nominal size of 100 mm regular for wide-mouth glass containers.

Source: <https://www.cetie.org/en/finish-data-sheets-gme_102.html>

GME20.11 - Vacuum lug finish Ø 100 regular — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** GME20.12 - Vacuum lug finish Ø 110 regular

**Specification type:** neck_finish

**Description:** Dimensions of a vacuum lug finish with a nominal size of 110 mm regular for wide-mouth glass containers.

**Primary dimension:** 110 mm nominal size

**Equivalence or compatibility note:** Regular depth vacuum lug finish for wide-mouth glass containers

> See detail GME20.12 - Vacuum lug finish Ø 110 regular 01/01/1995 This document specifies the dimensions of a vacuum lug finish with a nominal size of 110 mm regular for wide-mouth glass containers.

Source: <https://www.cetie.org/en/finish-data-sheets-gme_102.html>

GME20.12 - Vacuum lug finish Ø 110 regular — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** GME21.00 - Glass neck finish - Continuous thread - ø 43 to 90 mm

**Specification type:** neck_finish

**Description:** Range of neck finishes with sizes from 43 to 90 mm with one continuous thread, designed to fit with plastic caps. Particularly well adapted to dry coffee content. Based on the British Glass GF316 data sheet.

**Primary dimension:** 43 to 90 mm nominal size

**Equivalence or compatibility note:** Based on the British Glass GF316 data sheet

**Additional data:** One continuous thread, designed to fit with plastic (mainly) caps

> See detail GME21.00 - Glass neck finish - Continuous thread - ø 43 to 90 mm 29/07/2020 - Latest update 05/06/2025 This range of neck finishes with sizes from 43 to 90 mm have one continuous thread and are designed to fit with plastic (mainly) caps. These relatively high finishes are particularly well adapted to dry coffee content. This document is based on the British Glass GF316 data sheet.

Source: <https://www.cetie.org/en/finish-data-sheets-gme_102.html>

GME21.00 - Glass neck finish - Continuous thread - ø 43 to 90 mm — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** GME21.10 - Flavlock finishes ø 26 to 38 mm

**Specification type:** neck_finish

**Description:** Range of Flavlock neck finishes with sizes from 26 to 38, intended as RO (Roll-On) finishes with metallic caps. The D-shaped thread run-off into the transfer bead.

**Primary dimension:** 26 to 38 mm nominal size

**Equivalence or compatibility note:** RO (Roll-On) finishes with metallic caps

**Additional data:** D-shaped thread run-off into the transfer bead

> See detail GME21.10 - Flavlock finishes ø 26 to 38 mm 07/05/2021 - Latest update 29/09/2021 This range of Flavlock neck finishes with sizes from 26 to 38 are intended as RO (Roll-On) finishes with metallic caps. The D-shaped thread run-off into the transfer bead.

Source: <https://www.cetie.org/en/finish-data-sheets-gme_102.html>

GME21.10 - Flavlock finishes ø 26 to 38 mm — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** GME30.06 - BVP screw finishes for non carbonated products

**Specification type:** neck_finish

**Description:** Specifications and dimensions of a series of screw finishes for the closure of beverages and other non-carbonated products. Finishes designed to take a tamper-evident closure which needs to be snapped before it can be opened, commonly known as a rolled on Pilferproof closure.

**Equivalence or compatibility note:** Rolled on Pilferproof closure (BVP series) for non-carbonated products

> See detail GME30.06 - BVP screw finishes for non carbonated products 01/10/2001 - Latest update 01/05/2004 Specifications and dimensions of a series of screw finishes for the closure of beverages and other non-carbonated products. Finishes designed to take a tamper-evident closure which needs to be snapped before it can be opened, commonly known as a rolled on Pilferproof closure. The ...

Source: <https://www.cetie.org/en/finish-data-sheets-gme_102.html>

GME30.06 - BVP screw finishes for non carbonated products — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** GME30.11 - Finish ALSECO-ALCOA 28mm

**Specification type:** neck_finish

**Description:** Dimensions of the 28-millimetre ALSECO-ALCOA screw finish for glass containers. This finish is very close to the MCA series.

**Primary dimension:** 28 mm diameter

**Equivalence or compatibility note:** This finish is very close to the MCA series (See GME 32.00 - MCA FINISHES)

> See detail GME30.11 - Finish ALSECO-ALCOA 28mm 01/01/2000 - Latest update 13/07/2022 This data sheet specifies the dimensions of the 28-millimetre ALSECO-ALCOA screw finish for glass containers. This finish is very close to the MCA series (See GME 32.00 - MCA FINISHES).

Source: <https://www.cetie.org/en/finish-data-sheets-gme_102.html>

GME30.11 - Finish ALSECO-ALCOA 28mm — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** GME30.13 - Deep BVS finishes for still wines

**Specification type:** neck_finish

**Description:** Specifications and dimensions of a series of deep screw glass finishes for the closure of wines with a CO2 content below 1.2 g/l.

**Equivalence or compatibility note:** BVS series deep screw finishes for still wines (CO2 below 1.2 g/l)

**Additional data:** Carbonation ≥1,2g/l in CO2 requires an appropriate bottle and an adapted capping method

> See detail GME30.13 - Deep BVS finishes for still wines 01/12/2008 - Latest update 28/03/2012 Specifications and dimensions of a series of deep screw glass finishes for the closure of wines with a CO2 content below 1.2 g/l. Note:

Source: <https://www.cetie.org/en/finish-data-sheets-gme_102.html>

GME30.13 - Deep BVS finishes for still wines — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** GME30.14 - 2-start thread pilfer-proof finishes

**Specification type:** neck_finish

**Description:** Dimensions of pilfer-proof finishes with a two-start thread, particularly dedicated to sweet liquids (liquors, etc). The 3 sizes (28H44, 30H60, 31,5H60) are compatible with caps made for standard BVP finishes.

**Primary dimension:** 28H44, 30H60, 31,5H60

**Equivalence or compatibility note:** Compatible with caps made for standard BVP finishes according to EN 15543

**Additional data:** Two-start thread, for sweet liquids (liquors)

> See detail GME30.14 - 2-start thread pilfer-proof finishes 17/12/2020 - Latest update 05/06/2025 This document specifies the dimensions of pilfer-proof finishes with a two-start thread, particularly dedicated to sweet liquids (liquors, etc…). The 3 sizes (28H44, 30H60, 31,5H60) are compatible with caps made for standard BVP finishes according to EN 15543 - GLASS PACKAGING.

Source: <https://www.cetie.org/en/finish-data-sheets-gme_102.html>

GME30.14 - 2-start thread pilfer-proof finishes — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** GME30.21 - PET finish 30/25H (18.5)

**Specification type:** neck_finish

**Description:** Specifications and dimensions of the 30 mm tall screw finish with three (3) thread starts for flat waters and non carbonated beverages. Can be used for aseptic filling and filling with introduction of nitrogen.

**Primary dimension:** 30 mm diameter, 18.5 mm height from top of finish

**Equivalence or compatibility note:** Three thread starts, for flat waters and non carbonated beverages

**Additional data:** Can be used for aseptic filling and filling with introduction of nitrogen

> See detail GME30.21 - PET finish 30/25H (18.5) 01/12/2007 Specifications and dimensions of the 30 mm tall screw finish with three (3) thread starts for flat waters and non carbonated beverages. This finish can be used for aseptic filling and filling with introduction of nitrogen.

Source: <https://www.cetie.org/en/finish-data-sheets-gme_102.html>

GME30.21 - PET finish 30/25H (18.5) — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** GME30.25 - PET finish 38/33-16,5-3/3

**Specification type:** neck_finish

**Description:** Specifications and dimensions of the 38 mm screw finish with three (3) thread starts and a 16,50 mm height for still waters and non-carbonated beverages.

**Primary dimension:** 38 mm diameter, 16.50 mm height

**Equivalence or compatibility note:** Three thread starts, for still waters and non-carbonated beverages

**Additional data:** Can be used for aseptic filling and filling with introduction of nitrogen (1 bar max)

> See detail GME30.25 - PET finish 38/33-16,5-3/3 01/03/2009 - Latest update 25/03/2026 This document provides specifications and dimensions of the 38 mm screw finish with three (3) thread starts and a 16,50 mm height for still waters and non-carbonated beverages. This finish can be used for aseptic filling and filling with introduction of nitrogen (1 bar max).

Source: <https://www.cetie.org/en/finish-data-sheets-gme_102.html>

GME30.25 - PET finish 38/33-16,5-3/3 — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** GME30.28 - PET finish 26/22-12-3/6.5

**Specification type:** neck_finish

**Description:** Specifications and dimensions of the 26 mm screw finish with three (3) thread starts for flat waters and non-carbonated beverages. Can be used for water with or without the introduction of nitrogen (internal overpressure should not exceed 1 bar).

**Primary dimension:** 26 mm diameter, 12.0 mm height

**Equivalence or compatibility note:** Three thread starts, for flat waters and non-carbonated beverages

**Additional data:** Internal overpressure should not exceed 1 bar

> See detail GME30.28 - PET finish 26/22-12-3/6.5 01/09/2011 - Latest update 01/04/2016 Specifications and dimensions of the 26 mm screw finish with three (3) thread starts for flat waters and non-carbonated beverages. This finish can be used for water with or without the introduction of nitrogen (internal Overpressure should not exceed 1 bar).

Source: <https://www.cetie.org/en/finish-data-sheets-gme_102.html>

GME30.28 - PET finish 26/22-12-3/6.5 — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** GME30.37 - PET finish 26/22-12,9-1/2,17 version 4,2 % vol CO2

**Specification type:** neck_finish

**Description:** Specifications and requirements of the 26/22 mm screw finish with one (1) thread start for carbonated beverages up to 8,4g CO2/l (4,2 vol % CO2) content and bottles of up to and including 2,0 l litres in capacity.

**Primary dimension:** 26 mm diameter, 12.9 mm height

**Equivalence or compatibility note:** One thread start, for carbonated beverages up to 8,4g CO2/l (4,2 vol % CO2)

**Additional data:** Bottles up to and including 2,0 litres in capacity

> See detail GME30.37 - PET finish 26/22-12,9-1/2,17 version 4,2 % vol CO2 01/04/2016 - Latest update 26/05/2026 This document provides specifications and requirements of the 26/22 mm screw finish with one (1) thread start for carbonated beverages up to 8,4g CO2/l (4,2 vol % CO2) content and bottles of up to and including 2,0 l litres in capacity. Important note:

Source: <https://www.cetie.org/en/finish-data-sheets-gme_102.html>

GME30.37 - PET finish 26/22-12,9-1/2,17 version 4,2 % vol CO2 — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** GME30.40 - PET finish 26/22-15,1-1/2,3

**Specification type:** neck_finish

**Description:** Specifications and requirements of the 26/22 mm screw finish with one (1) thread start for carbonated beverages.

**Primary dimension:** 26 mm diameter, 15.1 mm height

**Equivalence or compatibility note:** One thread start, for carbonated beverages

> the 26/22 mm screw finish with one (1) thread start for carbonated beverages

Source: <https://www.cetie.org/en/finish-data-sheets-gme_102.html>

GME30.40 - PET finish 26/22-15,1-1/2,3 — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** GME32.01 - 28mm screw finish for bottles with internal pressure

**Specification type:** neck_finish

**Description:** Specifications and dimensions of the 28 millimetres screw finish for one-way or returnable glass containers with internal pressure designated MCA 3 finish. Superseded by standard EN 17829.

**Primary dimension:** 28 mm diameter

**Equivalence or compatibility note:** MCA 3 finish. Superseded by standard EN 17829 - GLASS PACKAGING - 28 MILLIMETRE-SCREW FINISHES (MCA RANGE) - DIMENSIONS.

**Additional data:** For one-way or returnable glass containers with internal pressure

> See detail GME32.01 - 28mm screw finish for bottles with internal pressure 01/02/1995 Specifications and dimensions of the 28 millimetres screw finish for one-way or returnable glass containers with internal pressure designated MCA 3 finish.

Source: <https://www.cetie.org/en/finish-data-sheets-gme_102.html>

GME32.01 - 28mm screw finish for bottles with internal pressure — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** GME32.03 - PET PCO finish 27/22-21-1/3,18

**Specification type:** neck_finish

**Description:** Specifications and dimensions of the single start thread 27,43 mm PET PCO screw finish for the beverage industry. This finish has vent slots and is designed to take a tamper-evident plastic closure only.

**Primary dimension:** 27.43 mm diameter, 21 mm height

**Equivalence or compatibility note:** Single start thread PCO screw finish, tamper-evident plastic closure

**Additional data:** Has vent slots, tamper-evident band separates during first opening

> See detail GME32.03 - PET PCO finish 27/22-21-1/3,18 01/06/2006 - Latest update 26/03/2026 Specifications and dimensions of the single start thread 27,43 mm PET PCO screw finish for the beverage industry. This finish has vent slots and is designed to take a tamper-evident plastic closure only. During first opening, the tamper-evident band will separate from the closure shell and stay ...

Source: <https://www.cetie.org/en/finish-data-sheets-gme_102.html>

GME32.03 - PET PCO finish 27/22-21-1/3,18 — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** GME401 - Glass finish at 38mm standard ROPP (7 turns per inch)

**Specification type:** neck_finish

**Description:** Specifications and dimensions for the 38 mm standard ROPP glass finish.

**Primary dimension:** 38 mm diameter

**Equivalence or compatibility note:** Standard ROPP (Roll-On Pilfer-Proof), 7 turns per inch

**Additional data:** 7 turns per inch

> See detail GME401 - Glass finish at 38mm standard ROPP (7 turns per inch) 01/09/1987 This data sheet provides specifications and dimensions for the 38 mm standard ROPP glass finish.

Source: <https://www.cetie.org/en/finish-data-sheets-gme_102.html>

GME401 - Glass finish at 38mm standard ROPP (7 turns per inch) — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** GME50.01 - Cork mouth finish for corks and capsules

**Specification type:** neck_finish

**Description:** Dimensions of a cork mouth finish for corks and capsules for glass bottles, for wine that has a carbonation pressure not exceeding 2.0 g CO2/l, for use with natural corks.

**Equivalence or compatibility note:** For wine with carbonation pressure not exceeding 2.0 g CO2/l, for use with natural corks

> See detail GME402 - Lug finish 20mm for antibiotic and freeze dry glass containers 01/06/1987 See detail GME50.01 - Cork mouth finish for corks and capsules 01/04/1992 This data sheet specifies the dimensions of a cork mouth finish for corks and capsules for glass bottles, for wine that has a carbonation pressure not exceeding 2.0 g CO2/l, for use with natural corks.

Source: <https://www.cetie.org/en/finish-data-sheets-gme_102.html>

GME50.01 - Cork mouth finish for corks and capsules — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** GME50.02 - Glass bottle neck finish entry bore 17,5mm

**Specification type:** neck_finish

**Description:** Dimensional characteristics of a finish with a narrow entry bore (diameter 17,5 mm) for bottles containing wine with carbonation not exceeding 1,2 g CO2/l with internal sealing.

**Primary dimension:** 17,5 mm entry bore diameter

**Equivalence or compatibility note:** For wine with carbonation not exceeding 1,2 g CO2/l, with internal sealing

**Additional data:** Narrow entry bore

> a finish with a narrow entry bore (diameter 17,5 mm) for bottles containing a wine that has a carbonation not exceeding 1,2 g CO2/l with internal sealing

Source: <https://www.cetie.org/en/finish-data-sheets-gme_102.html>

GME50.02 - Glass bottle neck finish entry bore 17,5mm — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** GME51.00 - Glass bottle - Bartop stopper 27, 29, or 34 mm neck finish

**Specification type:** neck_finish

**Description:** Dimensional characteristics of the finish of bottles, bartop stopper and overcap, intended for the packaging of alcohols, spirits, liquors and fortified wines and musts.

**Primary dimension:** 27, 29, or 34 mm neck finish

**Equivalence or compatibility note:** For alcohols, spirits, liquors and fortified wines and musts

**Additional data:** Bartop stopper and overcap

> See detail GME51.00 - Glass bottle - Bartop stopper 27, 29, or 34 mm neck finish, stopper and overcap 02/10/2019 - Latest update 02/02/2026 This data sheet sets out the dimensional characteristics of the finish of bottles, bartop stopper and overcap, intended for the packaging of alcohols, spirits, liquors and fortified wines and musts. Neck finishes with other external profiles than the one defined in the section 2.1 can also ...

Source: <https://www.cetie.org/en/finish-data-sheets-gme_102.html>

GME51.00 - Glass bottle - Bartop stopper 27, 29, or 34 mm neck finish — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** Item 222 Double Wall 100 lbs

**Specification type:** corrugated_board

**Description:** Double wall corrugated fiberboard box per NMFC Item 222 / UFC Rule 41, max weight 100 lbs

**Primary dimension:** 275 lbs/sq.in. burst

**Secondary dimension:** 100 lbs max weight

**Equivalence or compatibility note:** Min. ECT 48 lbs/in. width

**Additional data:** Max outside dimensions L+W+D 95 in.; min combined weight of facings 110 lbs per 1,000 sq.ft.

> 100 95 275 110

Source: <https://www.ipack.com/blog/corrugated-rules-and-regulations>

Item 222 Double Wall 100 lbs — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** Item 222 Double Wall 120 lbs

**Specification type:** corrugated_board

**Description:** Double wall corrugated fiberboard box per NMFC Item 222 / UFC Rule 41, max weight 120 lbs

**Primary dimension:** 350 lbs/sq.in. burst

**Secondary dimension:** 120 lbs max weight

**Equivalence or compatibility note:** Min. ECT 51 lbs/in. width

**Additional data:** Max outside dimensions L+W+D 105 in.; min combined weight of facings 126 lbs per 1,000 sq.ft.

> 120 105 350 126

Source: <https://www.ipack.com/blog/corrugated-rules-and-regulations>

Item 222 Double Wall 120 lbs — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** Item 222 Double Wall 140 lbs

**Specification type:** corrugated_board

**Description:** Double wall corrugated fiberboard box per NMFC Item 222 / UFC Rule 41, max weight 140 lbs

**Primary dimension:** 400 lbs/sq.in. burst

**Secondary dimension:** 140 lbs max weight

**Equivalence or compatibility note:** Min. ECT 61 lbs/in. width

**Additional data:** Max outside dimensions L+W+D 110 in.; min combined weight of facings 180 lbs per 1,000 sq.ft.

> 140 110 400 180

Source: <https://www.ipack.com/blog/corrugated-rules-and-regulations>

Item 222 Double Wall 140 lbs — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** Item 222 Double Wall 160 lbs

**Specification type:** corrugated_board

**Description:** Double wall corrugated fiberboard box per NMFC Item 222 / UFC Rule 41, max weight 160 lbs

**Primary dimension:** 500 lbs/sq.in. burst

**Secondary dimension:** 160 lbs max weight

**Equivalence or compatibility note:** Min. ECT 71 lbs/in. width

**Additional data:** Max outside dimensions L+W+D 115 in.; min combined weight of facings 222 lbs per 1,000 sq.ft.

> 160 115 500 222

Source: <https://www.ipack.com/blog/corrugated-rules-and-regulations>

Item 222 Double Wall 160 lbs — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** Item 222 Double Wall 180 lbs

**Specification type:** corrugated_board

**Description:** Double wall corrugated fiberboard box per NMFC Item 222 / UFC Rule 41, max weight 180 lbs

**Primary dimension:** 600 lbs/sq.in. burst

**Secondary dimension:** 180 lbs max weight

**Equivalence or compatibility note:** Min. ECT 82 lbs/in. width

**Additional data:** Max outside dimensions L+W+D 120 in.; min combined weight of facings 270 lbs per 1,000 sq.ft.

> 180 120 600 270

Source: <https://www.ipack.com/blog/corrugated-rules-and-regulations>

Item 222 Double Wall 180 lbs — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** Item 222 Double Wall 80 lbs

**Specification type:** corrugated_board

**Description:** Double wall corrugated fiberboard box per NMFC Item 222 / UFC Rule 41, max weight 80 lbs

**Primary dimension:** 200 lbs/sq.in. burst

**Secondary dimension:** 80 lbs max weight

**Equivalence or compatibility note:** Min. ECT 42 lbs/in. width

**Additional data:** Max outside dimensions L+W+D 85 in.; min combined weight of facings 92 lbs per 1,000 sq.ft.

> Double Wall Corrugated Fiberboard Boxes 80 85 200 92

Source: <https://www.ipack.com/blog/corrugated-rules-and-regulations>

Item 222 Double Wall 80 lbs — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** Item 222 Single Wall 120 lbs

**Specification type:** corrugated_board

**Description:** Single wall corrugated fiberboard box per NMFC Item 222 / UFC Rule 41, max weight 120 lbs

**Primary dimension:** 350 lbs/sq.in. burst

**Secondary dimension:** 120 lbs max weight

**Equivalence or compatibility note:** Min. ECT 55 lbs/in. width

**Additional data:** Max outside dimensions L+W+D 105 in.; min combined weight of facings 180 lbs per 1,000 sq.ft.

> 120 105 350 180

Source: <https://www.ipack.com/blog/corrugated-rules-and-regulations>

Item 222 Single Wall 120 lbs — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** Item 222 Single Wall 20 lbs

**Specification type:** corrugated_board

**Description:** Single wall corrugated fiberboard box per NMFC Item 222 / UFC Rule 41, max weight 20 lbs

**Primary dimension:** 125 lbs/sq.in. burst

**Secondary dimension:** 20 lbs max weight

**Equivalence or compatibility note:** Min. ECT 23 lbs/in. width

**Additional data:** Max outside dimensions L+W+D 40 in.; min combined weight of facings 52 lbs per 1,000 sq.ft.

> Single Wall Corrugated Fiberboard Boxes 20 40 125 52

Source: <https://www.ipack.com/blog/corrugated-rules-and-regulations>

Item 222 Single Wall 20 lbs — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards

additional_data, dimension_1, dimension_2, equivalence_note, specification_description, specification_id


**Specification ID:** Item 222 Single Wall 35 lbs

**Specification type:** corrugated_board

**Description:** Single wall corrugated fiberboard box per NMFC Item 222 / UFC Rule 41, max weight 35 lbs

**Primary dimension:** 150 lbs/sq.in. burst

**Secondary dimension:** 35 lbs max weight

**Equivalence or compatibility note:** Min. ECT 26 lbs/in. width

**Additional data:** Max outside dimensions L+W+D 50 in.; min combined weight of facings 66 lbs per 1,000 sq.ft.

> 35 50 150 66

Source: <https://www.ipack.com/blog/corrugated-rules-and-regulations>

Item 222 Single Wall 35 lbs — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** Item 222 Single Wall 50 lbs

**Specification type:** corrugated_board

**Description:** Single wall corrugated fiberboard box per NMFC Item 222 / UFC Rule 41, max weight 50 lbs

**Primary dimension:** 175 lbs/sq.in. burst

**Secondary dimension:** 50 lbs max weight

**Equivalence or compatibility note:** Min. ECT 29 lbs/in. width

**Additional data:** Max outside dimensions L+W+D 60 in.; min combined weight of facings 75 lbs per 1,000 sq.ft.

> 50 60 175 75

Source: <https://www.ipack.com/blog/corrugated-rules-and-regulations>

Item 222 Single Wall 50 lbs — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** Item 222 Single Wall 65 lbs

**Specification type:** corrugated_board

**Description:** Single wall corrugated fiberboard box per NMFC Item 222 / UFC Rule 41, max weight 65 lbs

**Primary dimension:** 200 lbs/sq.in. burst

**Secondary dimension:** 65 lbs max weight

**Equivalence or compatibility note:** Min. ECT 32 lbs/in. width

**Additional data:** Max outside dimensions L+W+D 75 in.; min combined weight of facings 84 lbs per 1,000 sq.ft.

> 65 75 200 84

Source: <https://www.ipack.com/blog/corrugated-rules-and-regulations>

Item 222 Single Wall 65 lbs — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** Item 222 Single Wall 80 lbs

**Specification type:** corrugated_board

**Description:** Single wall corrugated fiberboard box per NMFC Item 222 / UFC Rule 41, max weight 80 lbs

**Primary dimension:** 250 lbs/sq.in. burst

**Secondary dimension:** 80 lbs max weight

**Equivalence or compatibility note:** Min. ECT 40 lbs/in. width

**Additional data:** Max outside dimensions L+W+D 85 in.; min combined weight of facings 111 lbs per 1,000 sq.ft.

> 80 85 250 111

Source: <https://www.ipack.com/blog/corrugated-rules-and-regulations>

Item 222 Single Wall 80 lbs — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** Item 222 Single Wall 95 lbs

**Specification type:** corrugated_board

**Description:** Single wall corrugated fiberboard box per NMFC Item 222 / UFC Rule 41, max weight 95 lbs

**Primary dimension:** 275 lbs/sq.in. burst

**Secondary dimension:** 95 lbs max weight

**Equivalence or compatibility note:** Min. ECT 44 lbs/in. width

**Additional data:** Max outside dimensions L+W+D 95 in.; min combined weight of facings 138 lbs per 1,000 sq.ft.

> 95 95 275 138

Source: <https://www.ipack.com/blog/corrugated-rules-and-regulations>

Item 222 Single Wall 95 lbs — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** Item 222 Triple Wall 240 lbs

**Specification type:** corrugated_board

**Description:** Triple wall corrugated fiberboard box per NMFC Item 222 / UFC Rule 41, max weight 240 lbs

**Primary dimension:** 700 puncture test (in. oz. per in. of tear)

**Secondary dimension:** 240 lbs max weight

**Equivalence or compatibility note:** Min. ECT 67 lbs/in. width

**Additional data:** Max outside dimensions L+W+D 110 in.; min combined weight of facings 168 lbs per 1,000 sq.ft.

> Triple Wall Corrugated Fiberboard Boxes 240 110 700 168

Source: <https://www.ipack.com/blog/corrugated-rules-and-regulations>

Item 222 Triple Wall 240 lbs — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** Item 222 Triple Wall 260 lbs

**Specification type:** corrugated_board

**Description:** Triple wall corrugated fiberboard box per NMFC Item 222 / UFC Rule 41, max weight 260 lbs

**Primary dimension:** 900 puncture test (in. oz. per in. of tear)

**Secondary dimension:** 260 lbs max weight

**Equivalence or compatibility note:** Min. ECT 80 lbs/in. width

**Additional data:** Max outside dimensions L+W+D 115 in.; min combined weight of facings 222 lbs per 1,000 sq.ft.

> 260 115 900 222

Source: <https://www.ipack.com/blog/corrugated-rules-and-regulations>

Item 222 Triple Wall 260 lbs — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** Item 222 Triple Wall 280 lbs

**Specification type:** corrugated_board

**Description:** Triple wall corrugated fiberboard box per NMFC Item 222 / UFC Rule 41, max weight 280 lbs

**Primary dimension:** 1100 puncture test (in. oz. per in. of tear)

**Secondary dimension:** 280 lbs max weight

**Equivalence or compatibility note:** Min. ECT 90 lbs/in. width

**Additional data:** Max outside dimensions L+W+D 120 in.; min combined weight of facings 264 lbs per 1,000 sq.ft.

> 280 120 1100 264

Source: <https://www.ipack.com/blog/corrugated-rules-and-regulations>

Item 222 Triple Wall 280 lbs — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards


**Specification ID:** Item 222 Triple Wall 300 lbs

**Specification type:** corrugated_board

**Description:** Triple wall corrugated fiberboard box per NMFC Item 222 / UFC Rule 41, max weight 300 lbs

**Primary dimension:** 1300 puncture test (in. oz. per in. of tear)

**Secondary dimension:** 300 lbs max weight

**Equivalence or compatibility note:** Min. ECT 112 lbs/in. width

**Additional data:** Max outside dimensions L+W+D 125 in.; min combined weight of facings 360 lbs per 1,000 sq.ft.

> 300 125 1300 360

Source: <https://www.ipack.com/blog/corrugated-rules-and-regulations>

Item 222 Triple Wall 300 lbs — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards