GME50.02 - Glass bottle - Specifications of a neck finish with entry bore diameter 17,5mm
What is the specification type for GME50.02 - Glass bottle - Specifications of a neck finish with entry bore diameter 17,5mm?
For GME50.02 - Glass bottle - Specifications of a neck finish with entry bore diameter 17,5mm, specification type is neck_finish, recorded from its source on 2026-09-23.
This document sets out the dimensional characteristics of a finish with a narrow entry bore (diameter 17,5 mm) for bottles containing a wine that has a carbonation not exceeding 1,2 g CO2/l with internal sealing. Note: Carbonation over 1,2 g CO2/l requires a suitable container and stopper ...
— cetie.org, retrieved 2026-09-23
- Specification ID
- GME50.02 - Glass bottle - Specifications of a neck finish with entry bore diameter 17,5mm our reading
- Specification type
- neck_finish our reading
- Description
- This document sets out the dimensional characteristics of a finish with a narrow entry bore (diameter 17,5 mm) for bottles containing a wine that has a carbonation not exceeding 1,2 g CO2/l with internal sealing. Note: Carbonation over 1,2 g CO2/l requires a suitable container and stopper ... verified
Values marked our reading are our classification of what the source says — the source does not print them in those words. The quote below is the evidence for each one; judge it yourself.
Where each value comes from
The value above is stated away from the sentence quoted with the answer, so the passage that states it is shown here too.
Specification ID
GME50.02 - Glass bottle - Specifications of a neck finish with entry bore diameter 17,5mm
— all from cetie.org, retrieved 2026-09-23
Source
- cetie.orghttps://www.cetie.org/en/finish-data-sheets-gme_102.html