# GME50.02 - Glass bottle - Specifications of a neck finish with entry bore diameter 17,5mm — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards

For GME50.02 - Glass bottle - Specifications of a neck finish with entry bore diameter 17,5mm, specification type is neck_finish, recorded from its source on 2026-09-23.

- **Specification ID:** GME50.02 - Glass bottle - Specifications of a neck finish with entry bore diameter 17,5mm _(our reading, not quoted from the source)_
- **Specification type:** neck_finish _(our reading, not quoted from the source)_
- **Description:** This document sets out the dimensional characteristics of a finish with a narrow entry bore (diameter 17,5 mm) for bottles containing a wine that has a carbonation not exceeding 1,2 g CO2/l with internal sealing. Note: Carbonation over 1,2 g CO2/l requires a suitable container and stopper ... _(verified: appears in the quote below)_

## What the source says

> This document sets out the dimensional characteristics of a finish with a narrow entry bore (diameter 17,5 mm) for bottles containing a wine that has a carbonation not exceeding 1,2 g CO2/l with internal sealing. Note: Carbonation over 1,2 g CO2/l requires a suitable container and stopper ...

## Where each value comes from

This source states these in separate places, so each value is shown with the passage that states it.

### Specification ID

> GME50.02 - Glass bottle - Specifications of a neck finish with entry bore diameter 17,5mm

## Source

- https://www.cetie.org/en/finish-data-sheets-gme_102.html

Last verified: 2026-09-23. Review by: 2028-09-22.
Part of [Packaging specification equivalence: neck finishes, corrugated grades and pallet standards](https://referencesource.org/packaging-material-specification-equivalence/).