GME51.00 - Glass bottle - Bartop stopper 27, 29, or 34 mm neck finish, stopper and overcap
What is the specification type for GME51.00 - Glass bottle - Bartop stopper 27, 29, or 34 mm neck finish, stopper and overcap?
For GME51.00 - Glass bottle - Bartop stopper 27, 29, or 34 mm neck finish, stopper and overcap, specification type is neck_finish, recorded from its source on 2026-09-23.
This data sheet sets out the dimensional characteristics of the finish of bottles, bartop stopper and overcap, intended for the packaging of alcohols, spirits, liquors and fortified wines and musts. Neck finishes with other external profiles than the one defined in the section 2.1 can also ...
— cetie.org, retrieved 2026-09-23
- Specification ID
- GME51.00 - Glass bottle - Bartop stopper 27, 29, or 34 mm neck finish, stopper and overcap our reading
- Specification type
- neck_finish our reading
- Description
- This data sheet sets out the dimensional characteristics of the finish of bottles, bartop stopper and overcap, intended for the packaging of alcohols, spirits, liquors and fortified wines and musts. Neck finishes with other external profiles than the one defined in the section 2.1 can also ... verified
Values marked our reading are our classification of what the source says — the source does not print them in those words. The quote below is the evidence for each one; judge it yourself.
Where each value comes from
The value above is stated away from the sentence quoted with the answer, so the passage that states it is shown here too.
Specification ID
GME51.00 - Glass bottle - Bartop stopper 27, 29, or 34 mm neck finish, stopper and overcap
— all from cetie.org, retrieved 2026-09-23
Source
- cetie.orghttps://www.cetie.org/en/finish-data-sheets-gme_102.html