# GME51.00 - Glass bottle - Bartop stopper 27, 29, or 34 mm neck finish, stopper and overcap — Packaging specification equivalence: neck finishes, corrugated grades and pallet standards

For GME51.00 - Glass bottle - Bartop stopper 27, 29, or 34 mm neck finish, stopper and overcap, specification type is neck_finish, recorded from its source on 2026-09-23.

- **Specification ID:** GME51.00 - Glass bottle - Bartop stopper 27, 29, or 34 mm neck finish, stopper and overcap _(our reading, not quoted from the source)_
- **Specification type:** neck_finish _(our reading, not quoted from the source)_
- **Description:** This data sheet sets out the dimensional characteristics of the finish of bottles, bartop stopper and overcap, intended for the packaging of alcohols, spirits, liquors and fortified wines and musts. Neck finishes with other external profiles than the one defined in the section 2.1 can also ... _(verified: appears in the quote below)_

## What the source says

> This data sheet sets out the dimensional characteristics of the finish of bottles, bartop stopper and overcap, intended for the packaging of alcohols, spirits, liquors and fortified wines and musts. Neck finishes with other external profiles than the one defined in the section 2.1 can also ...

## Where each value comes from

This source states these in separate places, so each value is shown with the passage that states it.

### Specification ID

> GME51.00 - Glass bottle - Bartop stopper 27, 29, or 34 mm neck finish, stopper and overcap

## Source

- https://www.cetie.org/en/finish-data-sheets-gme_102.html

Last verified: 2026-09-23. Review by: 2028-09-22.
Part of [Packaging specification equivalence: neck finishes, corrugated grades and pallet standards](https://referencesource.org/packaging-material-specification-equivalence/).