GME21.10 - Flavlock finishes ø 26 to 38 mm
What is the specification type for GME21.10 - Flavlock finishes ø 26 to 38 mm?
For GME21.10 - Flavlock finishes ø 26 to 38 mm, specification type is neck_finish, recorded from its source on 2026-09-23.
This range of Flavlock neck finishes with sizes from 26 to 38 are intended as RO (Roll-On) finishes with metallic caps. The D-shaped thread run-off into the transfer bead. The deep start of the thread (S) ensures a good 'top and side' sealing. Caps have a generous level of sealing ...
— cetie.org, retrieved 2026-09-23
- Specification ID
- GME21.10 - Flavlock finishes ø 26 to 38 mm our reading
- Specification type
- neck_finish our reading
- Description
- This range of Flavlock neck finishes with sizes from 26 to 38 are intended as RO (Roll-On) finishes with metallic caps. The D-shaped thread run-off into the transfer bead. The deep start of the thread (S) ensures a good 'top and side' sealing. Caps have a generous level of sealing ... verified
Values marked our reading are our classification of what the source says — the source does not print them in those words. The quote below is the evidence for each one; judge it yourself.
Where each value comes from
The value above is stated away from the sentence quoted with the answer, so the passage that states it is shown here too.
Specification ID
GME21.10 - Flavlock finishes ø 26 to 38 mm
— all from cetie.org, retrieved 2026-09-23
Source
- cetie.orghttps://www.cetie.org/en/finish-data-sheets-gme_102.html