GME30.36 - PET finish 32/27-14.9-2/2,7
What is the specification type for GME30.36 - PET finish 32/27-14.9-2/2,7?
For GME30.36 - PET finish 32/27-14.9-2/2,7, specification type is neck_finish, recorded from its source on 2026-09-23.
This document provides specifications and dimensions of the 32 mm screw finish with two (2) thread starts for still waters and non-carbonated beverages. This finish can be used for aseptic filling and filling with introduction of nitrogen (the internal pressure should not exceed 1 bar). This ...
— cetie.org, retrieved 2026-09-23
- Specification ID
- GME30.36 - PET finish 32/27-14.9-2/2,7 our reading
- Specification type
- neck_finish our reading
- Description
- This document provides specifications and dimensions of the 32 mm screw finish with two (2) thread starts for still waters and non-carbonated beverages. This finish can be used for aseptic filling and filling with introduction of nitrogen (the internal pressure should not exceed 1 bar). This ... verified
Values marked our reading are our classification of what the source says — the source does not print them in those words. The quote below is the evidence for each one; judge it yourself.
Where each value comes from
The value above is stated away from the sentence quoted with the answer, so the passage that states it is shown here too.
Specification ID
GME30.36 - PET finish 32/27-14.9-2/2,7
— all from cetie.org, retrieved 2026-09-23
Source
- cetie.orghttps://www.cetie.org/en/finish-data-sheets-gme_102.html