GME33.03 - PET neck finish 43/37-14,7-1/4,24-1,25 turns for HPC applications
What is the specification type for GME33.03 - PET neck finish 43/37-14,7-1/4,24-1,25 turns for HPC applications?
For GME33.03 - PET neck finish 43/37-14,7-1/4,24-1,25 turns for HPC applications, specification type is neck_finish; description is This document aims to fully specify a PET Neck Finish standard for the HPC market with a nominal crest of thread diameter of 43 mm and denominated as 43/37-14,7-1/4,24-1,25 turns (for standard neck finish nomenclature, please refer to DT23.03 - PET FINISHES GLOSSARY AND NOMENCLATURE). It also , recorded from its source on 2026-09-23.
This document aims to fully specify a PET Neck Finish standard for the HPC market with a nominal crest of thread diameter of 43 mm and denominated as 43/37-14,7-1/4,24-1,25 turns (for standard neck finish nomenclature, please refer to DT23.03 - PET FINISHES GLOSSARY AND NOMENCLATURE). It also ...
— cetie.org, retrieved 2026-09-23
- Specification ID
- GME33.03 - PET neck finish 43/37-14,7-1/4,24-1,25 turns for HPC applications our reading
- Specification type
- neck_finish our reading
- Description
- This document aims to fully specify a PET Neck Finish standard for the HPC market with a nominal crest of thread diameter of 43 mm and denominated as 43/37-14,7-1/4,24-1,25 turns (for standard neck finish nomenclature, please refer to DT23.03 - PET FINISHES GLOSSARY AND NOMENCLATURE). It also ... verified
Values marked our reading are our classification of what the source says — the source does not print them in those words. The quote below is the evidence for each one; judge it yourself.
Where each value comes from
The value above is stated away from the sentence quoted with the answer, so the passage that states it is shown here too.
Specification ID
GME33.03 - PET neck finish 43/37-14,7-1/4,24-1,25 turns for HPC applications
— all from cetie.org, retrieved 2026-09-23
Source
- cetie.orghttps://www.cetie.org/en/finish-data-sheets-gme_102.html