GME30.21 - PET finish 30/25H (18.5)
For GME30.21 - PET finish 30/25H (18.5), specification type is neck_finish; description is Specifications and dimensions of the 30 mm tall screw finish with three (3) thread starts for flat waters and non carbonated beverages. Can be used for aseptic filling and filling with introduction of nitrogen; primary dimension is 30 mm diameter, 18.5 mm height from top of finish; equivalence or compatibility note is Three thread starts, for flat waters and non carbonated beverages; additional data is Can be used for aseptic filling and filling with introduction of nitrogen, recorded from its source on 2026-08-12.
- Specification ID
- GME30.21 - PET finish 30/25H (18.5) verified
- Specification type
- neck_finish our reading
- Description
- Specifications and dimensions of the 30 mm tall screw finish with three (3) thread starts for flat waters and non carbonated beverages. Can be used for aseptic filling and filling with introduction of nitrogen. verified
- Primary dimension
- 30 mm diameter, 18.5 mm height from top of finish
- Equivalence or compatibility note
- Three thread starts, for flat waters and non carbonated beverages verified
- Additional data
- Can be used for aseptic filling and filling with introduction of nitrogen verified
Values marked our reading are our classification of what the source says — the source does not print them in those words. The quote below is the evidence for each one; judge it yourself.
What the source says
See detail GME30.21 - PET finish 30/25H (18.5) 01/12/2007 Specifications and dimensions of the 30 mm tall screw finish with three (3) thread starts for flat waters and non carbonated beverages. This finish can be used for aseptic filling and filling with introduction of nitrogen.
— cetie.org, retrieved 2026-08-12
Source
- cetie.orghttps://www.cetie.org/en/finish-data-sheets-gme_102.html