DIN 1471 — Grooved pins – Fulllength taper grooved — ISO 8744
What is the din standard for DIN 1471 — Grooved pins – Fulllength taper grooved — ISO 8744?
For DIN 1471, fastener description is Grooved pins – Fulllength taper grooved; iso equivalent is 8744, verified against its source on 2026-08-12.
1471 | 8744 | 28744 | | 8744 | 1998-03 | Grooved pins – Full-length taper grooved | Nominal lengths redefined. Shear rate increased. |
— fullerfasteners.com, retrieved 2026-08-12
- DIN standard
- 1471 verified
- Fastener description
- Grooved pins – Fulllength taper grooved
- ISO equivalent
- 8744 verified
- Interchangeability
- Nominal lengths redefined. Shear rate increased. verified
- Modification notes
- Nominal lengths redefined. Shear rate increased. verified
Sources disagree
More than one authority states this, and they do not state the same thing. Both are reproduced with the source each came from — deciding between them is yours, not ours.
Fastener description
fullerfasteners.com says fastener description is Grooved pins – Fulllength taper grooved, as of 2026-08-12.
1471 | 8744 | 28744 | | 8744 | 1998-03 | Grooved pins – Full-length taper grooved | Nominal lengths redefined. Shear rate increased. |
https://fullerfasteners.com/tech/din-iso-en-crossover-chart/
trfastenings.com says fastener description is Grooved Pins, full length taper-grooved, as of 2026-08-12.
DIN 1471 | ISO 8744 | | Grooved Pins, full length taper-grooved |
https://www.trfastenings.com/knowledge-base/engineering-data/fastener-standards
Sources
- fullerfasteners.comhttps://fullerfasteners.com/tech/din-iso-en-crossover-chart/
- trfastenings.comhttps://www.trfastenings.com/knowledge-base/engineering-data/fastener-standards