DIN 1470 — Grooved pins – Fulllength parallel grooved, with pilot — ISO 8739
What is the din standard for DIN 1470 — Grooved pins – Fulllength parallel grooved, with pilot — ISO 8739?
For DIN 1470, fastener description is Grooved pins – Fulllength parallel grooved, with pilot; iso equivalent is 8739, verified against its source on 2026-08-12.
1470 | 8739 | 28739 | | 8739 | 1998-03 | Grooved pins – Full-length parallel grooved, with pilot | Nominal lengths redefined. Shear rate increased. |
— fullerfasteners.com, retrieved 2026-08-12
- DIN standard
- 1470 verified
- Fastener description
- Grooved pins – Fulllength parallel grooved, with pilot
- ISO equivalent
- 8739 verified
- Interchangeability
- Nominal lengths redefined. Shear rate increased. verified
- Modification notes
- Nominal lengths redefined. Shear rate increased. verified
Sources disagree
More than one authority states this, and they do not state the same thing. Both are reproduced with the source each came from — deciding between them is yours, not ours.
Fastener description
fullerfasteners.com says fastener description is Grooved pins – Fulllength parallel grooved, with pilot, as of 2026-08-12.
1470 | 8739 | 28739 | | 8739 | 1998-03 | Grooved pins – Full-length parallel grooved, with pilot | Nominal lengths redefined. Shear rate increased. |
https://fullerfasteners.com/tech/din-iso-en-crossover-chart/
trfastenings.com says fastener description is Grooved Pins, full length parallel-grooved with pilot, as of 2026-08-12.
DIN 1470 | ISO 8739 | | Grooved Pins, full length parallel-grooved with pilot |
https://www.trfastenings.com/knowledge-base/engineering-data/fastener-standards
Sources
- fullerfasteners.comhttps://fullerfasteners.com/tech/din-iso-en-crossover-chart/
- trfastenings.comhttps://www.trfastenings.com/knowledge-base/engineering-data/fastener-standards