76 · FC 301/302 · WARNING
For 76 · FC 301/302 · WARNING, brand is Danfoss; model / series is FC 301/302; fault code is 76; fault name is Power unit setup; type is WARNING, verified against its source on 2026-09-01.
- Brand
- Danfoss
- Model / series
- FC 301/302
- Fault code
- 76 verified
- Fault name
- Power unit setup verified
- Type
- WARNING verified
- Cause
- The required number of power units do not match the detected number of active power units. This warning occurs when replacing a module for an F-size enclosure if the power-specific data in the module power card does not match the rest of the frequency converter. verified
- Corrective action
- • Confirm that the spare part and its power card are the correct part number. verified
What the source says
WARNING 76, Power unit setup
— files.danfoss.com, retrieved 2026-09-01
Where each value comes from
This source states these in separate places, so each value is shown with the passage that states it.
Cause
The required number of power units do not match the detected number of active power units. This warning occurs when replacing a module for an F-size enclosure if the power-specific data in the module power card does not match the rest of the frequency converter.
Corrective action
• Confirm that the spare part and its power card are the correct part number.
— all from files.danfoss.com, retrieved 2026-09-01
Source
- files.danfoss.comhttps://files.danfoss.com/download/Drives/MG33MO22.pdf