bUSy · GA800 · Not an alarm.
For bUSy · GA800 · Not an alarm., brand is Yaskawa; model / series is GA800; fault code is bUSy; fault name is Busy; type is Not an alarm, verified against its source on 2026-09-01.
- Brand
- Yaskawa
- Model / series
- GA800
- Fault code
- bUSy verified
- Fault name
- Busy verified
- Type
- Not an alarm. verified
- Cause
- You set the drive to use MEMOBUS/Modbus communications to change parameters, but you used the keypad to change parameters. verified
- Corrective action
- Use MEMOBUS/Modbus communications to enter the enter command, then use the keypad to change the parameter. verified
What the source says
bUSy Busy - Not an alarm. 125
— yaskawa.com, retrieved 2026-09-01
Where each value comes from
This source states these in separate places, so each value is shown with the passage that states it.
Cause
You set the drive to use MEMOBUS/Modbus communications to change parameters, but you used the keypad to change parameters.
Corrective action
Use MEMOBUS/Modbus communications to enter the enter command, then use the keypad to change the parameter.
— all from yaskawa.com, retrieved 2026-09-01
Source
- yaskawa.comhttps://www.yaskawa.com/delegate/getAttachment?documentId=TOEPYAIGA8001&cmd=documents&documentName=TOEPYAIGA8001.pdf