oC · GA800 · Fault
For oC, model / series is GA800; type is Fault; brand is Yaskawa; fault name is Overcurrent; cause is The load is too heavy, verified against its source on 2026-10-10.
- Brand
- Yaskawa
- Model / series
- GA800
- Fault code
- oC verified
- Fault name
- Overcurrent verified
- Type
- Fault verified
- Cause
- The load is too heavy. verified
- Corrective action
- • Measure the current flowing into the motor. • Replace the drive with a larger capacity model if the current value is more than the drive rated current. • Decrease the load or replace with a larger drive to prevent sudden changes in the current level. verified
What the source says
oC (0007) Overcurrent Illuminated Fault 105
— yaskawa.com, retrieved 2026-09-01
Where each value comes from
This source states these in separate places, so each value is shown with the passage that states it.
Cause
The load is too heavy.
Corrective action
• Measure the current flowing into the motor. • Replace the drive with a larger capacity model if the current value is more than the drive rated current. • Decrease the load or replace with a larger drive to prevent sudden changes in the current level.
— all from yaskawa.com, retrieved 2026-09-01
Source
- yaskawa.comhttps://www.yaskawa.com/delegate/getAttachment?documentId=TOEPYAIGA8001&cmd=documents&documentName=TOEPYAIGA8001.pdf