Err · GA800 · Fault
For Err, model / series is GA800; type is Fault; brand is Yaskawa; fault name is EEPROM Write Error; cause is There was a problem with the EEPROM hardware, verified against its source on 2026-10-10.
- Brand
- Yaskawa
- Model / series
- GA800
- Fault code
- Err verified
- Fault name
- EEPROM Write Error verified
- Type
- Fault verified
- Cause
- There was a problem with the EEPROM hardware. verified
- Corrective action
- • Re-energize the drive. • If the fault stays, replace the control board or the drive. Contact Yaskawa or your nearest sales representative to replace the board. verified
What the source says
Err (001F) EEPROM Write Error Illuminated Fault 103
— yaskawa.com, retrieved 2026-09-01
Where each value comes from
This source states these in separate places, so each value is shown with the passage that states it.
Cause
There was a problem with the EEPROM hardware.
Corrective action
• Re-energize the drive. • If the fault stays, replace the control board or the drive. Contact Yaskawa or your nearest sales representative to replace the board.
— all from yaskawa.com, retrieved 2026-09-01
Source
- yaskawa.comhttps://www.yaskawa.com/delegate/getAttachment?documentId=TOEPYAIGA8001&cmd=documents&documentName=TOEPYAIGA8001.pdf