End6 · GA800 · Auto-Tuning Error
For End6 · GA800 · Auto-Tuning Error, brand is Yaskawa; model / series is GA800; fault code is End6; fault name is Leakage Inductance Alarm; type is Auto-Tuning Error, verified against its source on 2026-09-01.
- Brand
- Yaskawa
- Model / series
- GA800
- Fault code
- End6 verified
- Fault name
- Leakage Inductance Alarm verified
- Type
- Auto-Tuning Error verified
- Cause
- The Auto-Tuning results were not in the applicable parameter setting range. verified
- Corrective action
- Make sure that the input motor nameplate data is correct, and do Auto-Tuning again. verified
What the source says
End6 Leakage Inductance Alarm Flashing Auto-Tuning Error 141
— yaskawa.com, retrieved 2026-09-01
Where each value comes from
This source states these in separate places, so each value is shown with the passage that states it.
Cause
The Auto-Tuning results were not in the applicable parameter setting range.
Corrective action
Make sure that the input motor nameplate data is correct, and do Auto-Tuning again.
— all from yaskawa.com, retrieved 2026-09-01
Source
- yaskawa.comhttps://www.yaskawa.com/delegate/getAttachment?documentId=TOEPYAIGA8001&cmd=documents&documentName=TOEPYAIGA8001.pdf