DIN 1473 — Grooved pins – Full-length parallel grooved, with chamfer — ISO 8740
What is the din standard for DIN 1473 — Grooved pins – Full-length parallel grooved, with chamfer — ISO 8740?
For DIN 1473, fastener description is Grooved pins – Full-length parallel grooved, with chamfer; iso equivalent is 8740, verified against its source on 2026-08-12.
1473 | 8740 | 28740 | | 8740 | 1998-03 | Grooved pins – Full-length parallel grooved, with chamfer | Nominal lengths redefined. Shear rate increased. |
— fullerfasteners.com, retrieved 2026-08-12
- DIN standard
- 1473 verified
- Fastener description
- Grooved pins – Full-length parallel grooved, with chamfer verified
- ISO equivalent
- 8740 verified
- Interchangeability
- Nominal lengths redefined. Shear rate increased. verified
- Modification notes
- Nominal lengths redefined. Shear rate increased. verified
Sources disagree
More than one authority states this, and they do not state the same thing. Both are reproduced with the source each came from — deciding between them is yours, not ours.
Fastener description
fullerfasteners.com says fastener description is Grooved pins – Full-length parallel grooved, with chamfer, as of 2026-08-12.
1473 | 8740 | 28740 | | 8740 | 1998-03 | Grooved pins – Full-length parallel grooved, with chamfer | Nominal lengths redefined. Shear rate increased. |
https://fullerfasteners.com/tech/din-iso-en-crossover-chart/
trfastenings.com says fastener description is Grooved Pins, full length parallel-grooved with chamfer, as of 2026-08-12.
DIN 1473 | ISO 8740 | | Grooved Pins, full length parallel-grooved with chamfer |
https://www.trfastenings.com/knowledge-base/engineering-data/fastener-standards
Sources
- fullerfasteners.comhttps://fullerfasteners.com/tech/din-iso-en-crossover-chart/
- trfastenings.comhttps://www.trfastenings.com/knowledge-base/engineering-data/fastener-standards