Reference Source

Methyl isobutyl ketone; Hexone — workplace exposure limit

What is the pel (ppm) for Methyl isobutyl ketone; Hexone — workplace exposure limit?

For Methyl isobutyl ketone; Hexone, pel (ppm) is 50; pel (mg/m³) is 205; cas no. is 108101, verified against its source on 2026-08-05.

108101 | | Methyl isobutyl ketone; Hexone | 50 | 205 | | 75 | 300

dir.ca.gov, retrieved 2026-08-05

50
The most of this substance workplace air may legally contain, averaged over an 8-hour shift — OSHA's permissible exposure limit (PEL), in parts per million, from the agency's own table row quoted below. Where federal OSHA and Cal/OSHA disagree, both limits are stated, each with its own agency's table row as evidence. NIOSH's number, where there is one, is shown separately: it is a recommended limit, not a legal one, and it is often the strictest of the three.
Sourcedir.ca.gov
Verified
Review by
DatasetUS workplace chemical exposure limits: federal OSHA, Cal/OSHA and NIOSH, side by side
Substance
Methyl isobutyl ketone; Hexone verified
CAS No.
108101 verified
PEL (ppm)
50 verified
PEL (mg/m³)
205 verified
STEL (ppm)
75 verified
STEL (mg/m³)
300 verified

Source

Last verified against source: . Due for re-check by . This page as Markdown · OKF bundle · full dataset as JSON.

What is the OSHA exposure limit for this substance?Find the exposure limit for a substance in workplace air — federal OSHA, California and NIOSH, side by side.