Reference Source

Isopropyl alcohol — workplace exposure limit

What is the pel (ppm) for Isopropyl alcohol — workplace exposure limit?

For Isopropyl alcohol, pel (ppm) is 400; pel (mg/m³) is 980; cas no. is 67-63-0, verified against its source on 2026-08-05.

Isopropyl alcohol | 67-63-0 | 400 | 980 | - |

osha.gov, retrieved 2026-08-05

400
The most of this substance workplace air may legally contain, averaged over an 8-hour shift — OSHA's permissible exposure limit (PEL), in parts per million, from the agency's own table row quoted below. Where federal OSHA and Cal/OSHA disagree, both limits are stated, each with its own agency's table row as evidence. NIOSH's number, where there is one, is shown separately: it is a recommended limit, not a legal one, and it is often the strictest of the three.
Sourceosha.gov
Verified
Review by
DatasetUS workplace chemical exposure limits: federal OSHA, Cal/OSHA and NIOSH, side by side
Substance
Isopropyl alcohol verified
CAS No.
67-63-0 verified
PEL (ppm)
400 verified
PEL (mg/m³)
980 verified
STEL (ppm)
500 per dir.ca.gov
STEL (mg/m³)
1225 per dir.ca.gov
NIOSH REL (ppm)
TWA 400 per cdc.gov
NIOSH REL (mg/m³)
980 per cdc.gov

What dir.ca.gov says

67630 | | Isopropyl alcohol | 400 | 980 | | 500 | 1225

dir.ca.gov, retrieved 2026-08-05

What cdc.gov says

NIOSH REL TWA 400 ppm (980 mg/m3) ST 500 ppm (1225 mg/m3)

cdc.gov, retrieved 2026-09-08

Sources

Last verified against source: . Due for re-check by . This page as Markdown · OKF bundle · full dataset as JSON.

What is the OSHA exposure limit for this substance?Find the exposure limit for a substance in workplace air — federal OSHA, California and NIOSH, side by side.