Reference Source

Isopropyl acetate — workplace exposure limit

What is the pel (ppm) for Isopropyl acetate — workplace exposure limit?

For Isopropyl acetate, pel (ppm) is 250; pel (mg/m³) is 950; cas no. is 108-21-4, verified against its source on 2026-08-05.

Isopropyl acetate | 108-21-4 | 250 | 950 | - |

osha.gov, retrieved 2026-08-05

250
The most of this substance workplace air may legally contain, averaged over an 8-hour shift — OSHA's permissible exposure limit (PEL), in parts per million, from the agency's own table row quoted below. Where federal OSHA and Cal/OSHA disagree, both limits are stated, each with its own agency's table row as evidence. NIOSH's number, where there is one, is shown separately: it is a recommended limit, not a legal one, and it is often the strictest of the three.
Sourceosha.gov
Verified
Review by
DatasetUS workplace chemical exposure limits: federal OSHA, Cal/OSHA and NIOSH, side by side
Substance
Isopropyl acetate verified
CAS No.
108-21-4 verified
PEL (ppm)
250 verified
PEL (mg/m³)
950 verified
STEL (ppm)
310 per dir.ca.gov
STEL (mg/m³)
1185 per dir.ca.gov
NIOSH REL, as stated
See Appendix D per cdc.gov

What dir.ca.gov says

108214 | | Isopropyl acetate | 250 | 950 | | 310 | 1185

dir.ca.gov, retrieved 2026-08-05

What cdc.gov says

NIOSH REL See Appendix D

cdc.gov, retrieved 2026-09-08

Sources

Last verified against source: . Due for re-check by . This page as Markdown · OKF bundle · full dataset as JSON.

What is the OSHA exposure limit for this substance?Find the exposure limit for a substance in workplace air — federal OSHA, California and NIOSH, side by side.