Reference Source

Hydrogen fluoride, as F — workplace exposure limit

What is the pel (ppm) for Hydrogen fluoride, as F — workplace exposure limit?

For Hydrogen fluoride, as F, pel (ppm) is 0.4; pel (mg/m³) is 0.33; cas no. is 7664393, verified against its source on 2026-08-05.

7664393 | S | Hydrogen fluoride, as F | 0.4 | 0.33 | | 1 | 0.83

dir.ca.gov, retrieved 2026-08-05

0.4
The most of this substance workplace air may legally contain, averaged over an 8-hour shift — OSHA's permissible exposure limit (PEL), in parts per million, from the agency's own table row quoted below. Where federal OSHA and Cal/OSHA disagree, both limits are stated, each with its own agency's table row as evidence. NIOSH's number, where there is one, is shown separately: it is a recommended limit, not a legal one, and it is often the strictest of the three.
Sourcedir.ca.gov
Verified
Review by
DatasetUS workplace chemical exposure limits: federal OSHA, Cal/OSHA and NIOSH, side by side
Substance
Hydrogen fluoride, as F verified
CAS No.
7664393 verified
PEL (ppm)
0.4 verified
PEL (mg/m³)
0.33 verified
STEL (ppm)
1 verified
STEL (mg/m³)
0.83 verified

Source

Last verified against source: . Due for re-check by . This page as Markdown · OKF bundle · full dataset as JSON.

What is the OSHA exposure limit for this substance?Find the exposure limit for a substance in workplace air — federal OSHA, California and NIOSH, side by side.