UF5000

Sources disagree

More than one authority states this, and they do not state the same thing. Both are reproduced with the source each came from — deciding between them is yours, not ours.

Inverter brand

victronenergy.com says inverter brand is Victron, as of 2026-08-12.

CAN-bus Wiring 4. GX Device Settings 5. VEConfigure Settings 6. VE.Direct MPPT Settings 7. Example Wiring Diagram 8. Troubleshooting 9. FAQ and Known Issues The maximum charge and discharge current is limited to 25A, but the data sheet tells me the maximum is 100A. After charging the battery the charge current often changes between 0A and 25A. My system isn&#039;t charging at the rated capacity, or my PV is shutting down My system only charges the battery to 52.4V The battery won&#039;t charge to 100% &#039;Internal Error&#039; shown on battery status &#039;High cell voltage&#039; warning or alarm shown on battery status 10. Further Information DISQUS Victron & Pylontech UP2500, US2000(C/D), US3000, US3000C, US5000, US5000B, UF5000, Pelio-L, UP5000, Phantom-S, Force-L1 & L2 The combination of Victron products with Pylontech lithium batteries has been tested and certified by the Victron and Pylontech R&D departments. General information about the battery is found in Pylontech&#039;s documentation. This manual is intended to be used in conjunction with the product manual supplied by Pylontech. It provides additional and specific information regarding integration with Victron systems. The Pylontech includes a Battery Management System (BMS) with each battery module. This interfaces with the Victron <https://www.victronenergy.com/live/venus-os:start> GX device and can support multiple battery modules connected in parallel. 1. Product & system compatibility <https://www.victronenergy.com/live/_media/battery_compatibility:pylontech_battery.png> Battery | UP2500* | US2000 (Plus/C/D) | US3000(C) | UP5000 & US5000(B) | Pelio-L | Force-L1 & L2 | UF5000 | Nominal voltage | 24V | 48V | 48V | 48V | 51.2V | 48V | 51.2V | Module capacity | 2.55 kWh | 2.4 kWh | 3.5 kWh | 4.8 kwh | 5.12kWh | 3.55 kWh | Coming soon |

https://www.victronenergy.com/live/battery_compatibility:pylontech_phantom

pylonwebs3.s3.amazonaws.com says inverter brand is Voltronic, as of 2026-08-12.

[email protected] 3/8 Compatibility List of Pylontech ESS and Inverters Ver.2.35.xlsx 48V ESS Last Update: 2025/1/21 Key Features Inverter Activation Inverter Type Battery COMM. Application Force Firmware Ver Brand Charge Multiplus 48V (via Venus OS) CAN a Yes Yes 422/V2.15 On/off-grid Victron Energy Quattro 48V (via Venus OS) CAN a Yes Yes 422/V2.15 On/off-grid SI 4.4-M SMA Solar SI 6.0-H d CAN On/off-grid No Yes Technology AG SI 8.0-H SI 6048US Gateway: V1.06 Schneider- Conext XW Pro series CAN On/off-grid Yes Yes XW+ Pro: V1.04（UL) / Electric V1.05 (IEC) GW-BP/SBP CAN On-grid Yes Yes US2000 US2000V2 Goodwe h CAN On-grid Yes Yes GW-ES/ES-C10 US3000 US2000C EM US3000C CAN On-grid Yes Yes IMEON 3.6 US5000 CAN On/off-grid Yes Yes V1.7.6.5 Imeon Energy US5000-B IMEON 9.12 UP5000 CAN On/off-grid Yes Yes V1.7.6.5 UF5000 Xtender 48V serie CAN On/off-grid Yes Yes R652 Phantom-S Studer Innotec VarioString serie Force-L1/L2 CAN On/off-grid Yes Yes R652 Pelio-L VarioTrack 48V serie CAN On/off-grid Yes Yes R652 SPMC 480 CAN On/off-grid No Yes Selectronic SPMC 481 CAN On/off-grid No Yes SPMC 482 CAN On/off-grid No Yes Infinisolar series 48V RS485(9600) On/off-grid Yes Yes V1.00 Voltronic

https://pylonwebs3.s3.amazonaws.com/upload_us/2025/02/10/Compatibility%20List%20of%20Pylontech%20ESS%20and%20Inverters%20Ver.2.35_20250210103505A665.pdf

Nominal voltage

victronenergy.com says nominal voltage is 51.2V, as of 2026-08-12.

CAN-bus Wiring 4. GX Device Settings 5. VEConfigure Settings 6. VE.Direct MPPT Settings 7. Example Wiring Diagram 8. Troubleshooting 9. FAQ and Known Issues The maximum charge and discharge current is limited to 25A, but the data sheet tells me the maximum is 100A. After charging the battery the charge current often changes between 0A and 25A. My system isn&#039;t charging at the rated capacity, or my PV is shutting down My system only charges the battery to 52.4V The battery won&#039;t charge to 100% &#039;Internal Error&#039; shown on battery status &#039;High cell voltage&#039; warning or alarm shown on battery status 10. Further Information DISQUS Victron & Pylontech UP2500, US2000(C/D), US3000, US3000C, US5000, US5000B, UF5000, Pelio-L, UP5000, Phantom-S, Force-L1 & L2 The combination of Victron products with Pylontech lithium batteries has been tested and certified by the Victron and Pylontech R&D departments. General information about the battery is found in Pylontech&#039;s documentation. This manual is intended to be used in conjunction with the product manual supplied by Pylontech. It provides additional and specific information regarding integration with Victron systems. The Pylontech includes a Battery Management System (BMS) with each battery module. This interfaces with the Victron <https://www.victronenergy.com/live/venus-os:start> GX device and can support multiple battery modules connected in parallel. 1. Product & system compatibility <https://www.victronenergy.com/live/_media/battery_compatibility:pylontech_battery.png> Battery | UP2500* | US2000 (Plus/C/D) | US3000(C) | UP5000 & US5000(B) | Pelio-L | Force-L1 & L2 | UF5000 | Nominal voltage | 24V | 48V | 48V | 48V | 51.2V | 48V | 51.2V | Module capacity | 2.55 kWh | 2.4 kWh | 3.5 kWh | 4.8 kwh | 5.12kWh | 3.55 kWh | Coming soon |

https://www.victronenergy.com/live/battery_compatibility:pylontech_phantom

pylonwebs3.s3.amazonaws.com says nominal voltage is 48V, as of 2026-08-12.

[email protected] 3/8 Compatibility List of Pylontech ESS and Inverters Ver.2.35.xlsx 48V ESS Last Update: 2025/1/21 Key Features Inverter Activation Inverter Type Battery COMM. Application Force Firmware Ver Brand Charge Multiplus 48V (via Venus OS) CAN a Yes Yes 422/V2.15 On/off-grid Victron Energy Quattro 48V (via Venus OS) CAN a Yes Yes 422/V2.15 On/off-grid SI 4.4-M SMA Solar SI 6.0-H d CAN On/off-grid No Yes Technology AG SI 8.0-H SI 6048US Gateway: V1.06 Schneider- Conext XW Pro series CAN On/off-grid Yes Yes XW+ Pro: V1.04（UL) / Electric V1.05 (IEC) GW-BP/SBP CAN On-grid Yes Yes US2000 US2000V2 Goodwe h CAN On-grid Yes Yes GW-ES/ES-C10 US3000 US2000C EM US3000C CAN On-grid Yes Yes IMEON 3.6 US5000 CAN On/off-grid Yes Yes V1.7.6.5 Imeon Energy US5000-B IMEON 9.12 UP5000 CAN On/off-grid Yes Yes V1.7.6.5 UF5000 Xtender 48V serie CAN On/off-grid Yes Yes R652 Phantom-S Studer Innotec VarioString serie Force-L1/L2 CAN On/off-grid Yes Yes R652 Pelio-L VarioTrack 48V serie CAN On/off-grid Yes Yes R652 SPMC 480 CAN On/off-grid No Yes Selectronic SPMC 481 CAN On/off-grid No Yes SPMC 482 CAN On/off-grid No Yes Infinisolar series 48V RS485(9600) On/off-grid Yes Yes V1.00 Voltronic

https://pylonwebs3.s3.amazonaws.com/upload_us/2025/02/10/Compatibility%20List%20of%20Pylontech%20ESS%20and%20Inverters%20Ver.2.35_20250210103505A665.pdf

Communication interface

victronenergy.com says communication interface is CAN-bus, as of 2026-08-12.

CAN-bus Wiring 4. GX Device Settings 5. VEConfigure Settings 6. VE.Direct MPPT Settings 7. Example Wiring Diagram 8. Troubleshooting 9. FAQ and Known Issues The maximum charge and discharge current is limited to 25A, but the data sheet tells me the maximum is 100A. After charging the battery the charge current often changes between 0A and 25A. My system isn&#039;t charging at the rated capacity, or my PV is shutting down My system only charges the battery to 52.4V The battery won&#039;t charge to 100% &#039;Internal Error&#039; shown on battery status &#039;High cell voltage&#039; warning or alarm shown on battery status 10. Further Information DISQUS Victron & Pylontech UP2500, US2000(C/D), US3000, US3000C, US5000, US5000B, UF5000, Pelio-L, UP5000, Phantom-S, Force-L1 & L2 The combination of Victron products with Pylontech lithium batteries has been tested and certified by the Victron and Pylontech R&D departments. General information about the battery is found in Pylontech&#039;s documentation. This manual is intended to be used in conjunction with the product manual supplied by Pylontech. It provides additional and specific information regarding integration with Victron systems. The Pylontech includes a Battery Management System (BMS) with each battery module. This interfaces with the Victron <https://www.victronenergy.com/live/venus-os:start> GX device and can support multiple battery modules connected in parallel. 1. Product & system compatibility <https://www.victronenergy.com/live/_media/battery_compatibility:pylontech_battery.png> Battery | UP2500* | US2000 (Plus/C/D) | US3000(C) | UP5000 & US5000(B) | Pelio-L | Force-L1 & L2 | UF5000 | Nominal voltage | 24V | 48V | 48V | 48V | 51.2V | 48V | 51.2V | Module capacity | 2.55 kWh | 2.4 kWh | 3.5 kWh | 4.8 kwh | 5.12kWh | 3.55 kWh | Coming soon |

https://www.victronenergy.com/live/battery_compatibility:pylontech_phantom

pylonwebs3.s3.amazonaws.com says communication interface is RS485(9600), as of 2026-08-12.

[email protected] 3/8 Compatibility List of Pylontech ESS and Inverters Ver.2.35.xlsx 48V ESS Last Update: 2025/1/21 Key Features Inverter Activation Inverter Type Battery COMM. Application Force Firmware Ver Brand Charge Multiplus 48V (via Venus OS) CAN a Yes Yes 422/V2.15 On/off-grid Victron Energy Quattro 48V (via Venus OS) CAN a Yes Yes 422/V2.15 On/off-grid SI 4.4-M SMA Solar SI 6.0-H d CAN On/off-grid No Yes Technology AG SI 8.0-H SI 6048US Gateway: V1.06 Schneider- Conext XW Pro series CAN On/off-grid Yes Yes XW+ Pro: V1.04（UL) / Electric V1.05 (IEC) GW-BP/SBP CAN On-grid Yes Yes US2000 US2000V2 Goodwe h CAN On-grid Yes Yes GW-ES/ES-C10 US3000 US2000C EM US3000C CAN On-grid Yes Yes IMEON 3.6 US5000 CAN On/off-grid Yes Yes V1.7.6.5 Imeon Energy US5000-B IMEON 9.12 UP5000 CAN On/off-grid Yes Yes V1.7.6.5 UF5000 Xtender 48V serie CAN On/off-grid Yes Yes R652 Phantom-S Studer Innotec VarioString serie Force-L1/L2 CAN On/off-grid Yes Yes R652 Pelio-L VarioTrack 48V serie CAN On/off-grid Yes Yes R652 SPMC 480 CAN On/off-grid No Yes Selectronic SPMC 481 CAN On/off-grid No Yes SPMC 482 CAN On/off-grid No Yes Infinisolar series 48V RS485(9600) On/off-grid Yes Yes V1.00 Voltronic

https://pylonwebs3.s3.amazonaws.com/upload_us/2025/02/10/Compatibility%20List%20of%20Pylontech%20ESS%20and%20Inverters%20Ver.2.35_20250210103505A665.pdf

Minimum firmware

victronenergy.com says minimum firmware is Venus OS v3.50, as of 2026-08-12.

CAN-bus Wiring 4. GX Device Settings 5. VEConfigure Settings 6. VE.Direct MPPT Settings 7. Example Wiring Diagram 8. Troubleshooting 9. FAQ and Known Issues The maximum charge and discharge current is limited to 25A, but the data sheet tells me the maximum is 100A. After charging the battery the charge current often changes between 0A and 25A. My system isn&#039;t charging at the rated capacity, or my PV is shutting down My system only charges the battery to 52.4V The battery won&#039;t charge to 100% &#039;Internal Error&#039; shown on battery status &#039;High cell voltage&#039; warning or alarm shown on battery status 10. Further Information DISQUS Victron & Pylontech UP2500, US2000(C/D), US3000, US3000C, US5000, US5000B, UF5000, Pelio-L, UP5000, Phantom-S, Force-L1 & L2 The combination of Victron products with Pylontech lithium batteries has been tested and certified by the Victron and Pylontech R&D departments. General information about the battery is found in Pylontech&#039;s documentation. This manual is intended to be used in conjunction with the product manual supplied by Pylontech. It provides additional and specific information regarding integration with Victron systems. The Pylontech includes a Battery Management System (BMS) with each battery module. This interfaces with the Victron <https://www.victronenergy.com/live/venus-os:start> GX device and can support multiple battery modules connected in parallel. 1. Product & system compatibility <https://www.victronenergy.com/live/_media/battery_compatibility:pylontech_battery.png> Battery | UP2500* | US2000 (Plus/C/D) | US3000(C) | UP5000 & US5000(B) | Pelio-L | Force-L1 & L2 | UF5000 | Nominal voltage | 24V | 48V | 48V | 48V | 51.2V | 48V | 51.2V | Module capacity | 2.55 kWh | 2.4 kWh | 3.5 kWh | 4.8 kwh | 5.12kWh | 3.55 kWh | Coming soon |

https://www.victronenergy.com/live/battery_compatibility:pylontech_phantom

pylonwebs3.s3.amazonaws.com says minimum firmware is V1.00, as of 2026-08-12.

[email protected] 3/8 Compatibility List of Pylontech ESS and Inverters Ver.2.35.xlsx 48V ESS Last Update: 2025/1/21 Key Features Inverter Activation Inverter Type Battery COMM. Application Force Firmware Ver Brand Charge Multiplus 48V (via Venus OS) CAN a Yes Yes 422/V2.15 On/off-grid Victron Energy Quattro 48V (via Venus OS) CAN a Yes Yes 422/V2.15 On/off-grid SI 4.4-M SMA Solar SI 6.0-H d CAN On/off-grid No Yes Technology AG SI 8.0-H SI 6048US Gateway: V1.06 Schneider- Conext XW Pro series CAN On/off-grid Yes Yes XW+ Pro: V1.04（UL) / Electric V1.05 (IEC) GW-BP/SBP CAN On-grid Yes Yes US2000 US2000V2 Goodwe h CAN On-grid Yes Yes GW-ES/ES-C10 US3000 US2000C EM US3000C CAN On-grid Yes Yes IMEON 3.6 US5000 CAN On/off-grid Yes Yes V1.7.6.5 Imeon Energy US5000-B IMEON 9.12 UP5000 CAN On/off-grid Yes Yes V1.7.6.5 UF5000 Xtender 48V serie CAN On/off-grid Yes Yes R652 Phantom-S Studer Innotec VarioString serie Force-L1/L2 CAN On/off-grid Yes Yes R652 Pelio-L VarioTrack 48V serie CAN On/off-grid Yes Yes R652 SPMC 480 CAN On/off-grid No Yes Selectronic SPMC 481 CAN On/off-grid No Yes SPMC 482 CAN On/off-grid No Yes Infinisolar series 48V RS485(9600) On/off-grid Yes Yes V1.00 Voltronic

https://pylonwebs3.s3.amazonaws.com/upload_us/2025/02/10/Compatibility%20List%20of%20Pylontech%20ESS%20and%20Inverters%20Ver.2.35_20250210103505A665.pdf

Supported system types

victronenergy.com says supported system types is ESS, Grid Backup, Off-grid, as of 2026-08-12.

CAN-bus Wiring 4. GX Device Settings 5. VEConfigure Settings 6. VE.Direct MPPT Settings 7. Example Wiring Diagram 8. Troubleshooting 9. FAQ and Known Issues The maximum charge and discharge current is limited to 25A, but the data sheet tells me the maximum is 100A. After charging the battery the charge current often changes between 0A and 25A. My system isn&#039;t charging at the rated capacity, or my PV is shutting down My system only charges the battery to 52.4V The battery won&#039;t charge to 100% &#039;Internal Error&#039; shown on battery status &#039;High cell voltage&#039; warning or alarm shown on battery status 10. Further Information DISQUS Victron & Pylontech UP2500, US2000(C/D), US3000, US3000C, US5000, US5000B, UF5000, Pelio-L, UP5000, Phantom-S, Force-L1 & L2 The combination of Victron products with Pylontech lithium batteries has been tested and certified by the Victron and Pylontech R&D departments. General information about the battery is found in Pylontech&#039;s documentation. This manual is intended to be used in conjunction with the product manual supplied by Pylontech. It provides additional and specific information regarding integration with Victron systems. The Pylontech includes a Battery Management System (BMS) with each battery module. This interfaces with the Victron <https://www.victronenergy.com/live/venus-os:start> GX device and can support multiple battery modules connected in parallel. 1. Product & system compatibility <https://www.victronenergy.com/live/_media/battery_compatibility:pylontech_battery.png> Battery | UP2500* | US2000 (Plus/C/D) | US3000(C) | UP5000 & US5000(B) | Pelio-L | Force-L1 & L2 | UF5000 | Nominal voltage | 24V | 48V | 48V | 48V | 51.2V | 48V | 51.2V | Module capacity | 2.55 kWh | 2.4 kWh | 3.5 kWh | 4.8 kwh | 5.12kWh | 3.55 kWh | Coming soon |

https://www.victronenergy.com/live/battery_compatibility:pylontech_phantom

pylonwebs3.s3.amazonaws.com says supported system types is On/off-grid, as of 2026-08-12.

[email protected] 3/8 Compatibility List of Pylontech ESS and Inverters Ver.2.35.xlsx 48V ESS Last Update: 2025/1/21 Key Features Inverter Activation Inverter Type Battery COMM. Application Force Firmware Ver Brand Charge Multiplus 48V (via Venus OS) CAN a Yes Yes 422/V2.15 On/off-grid Victron Energy Quattro 48V (via Venus OS) CAN a Yes Yes 422/V2.15 On/off-grid SI 4.4-M SMA Solar SI 6.0-H d CAN On/off-grid No Yes Technology AG SI 8.0-H SI 6048US Gateway: V1.06 Schneider- Conext XW Pro series CAN On/off-grid Yes Yes XW+ Pro: V1.04（UL) / Electric V1.05 (IEC) GW-BP/SBP CAN On-grid Yes Yes US2000 US2000V2 Goodwe h CAN On-grid Yes Yes GW-ES/ES-C10 US3000 US2000C EM US3000C CAN On-grid Yes Yes IMEON 3.6 US5000 CAN On/off-grid Yes Yes V1.7.6.5 Imeon Energy US5000-B IMEON 9.12 UP5000 CAN On/off-grid Yes Yes V1.7.6.5 UF5000 Xtender 48V serie CAN On/off-grid Yes Yes R652 Phantom-S Studer Innotec VarioString serie Force-L1/L2 CAN On/off-grid Yes Yes R652 Pelio-L VarioTrack 48V serie CAN On/off-grid Yes Yes R652 SPMC 480 CAN On/off-grid No Yes Selectronic SPMC 481 CAN On/off-grid No Yes SPMC 482 CAN On/off-grid No Yes Infinisolar series 48V RS485(9600) On/off-grid Yes Yes V1.00 Voltronic

https://pylonwebs3.s3.amazonaws.com/upload_us/2025/02/10/Compatibility%20List%20of%20Pylontech%20ESS%20and%20Inverters%20Ver.2.35_20250210103505A665.pdf