Which lithium batteries have been tested with which solar inverter brands for closed-loop BMS communication, from the inverter and battery manufacturers' own published compatibility lists. Each record names the inverter brand, the battery brand and model, the communication protocol (CAN, RS485, etc.), minimum firmware versions required, system types supported (off-grid, backup, ESS), and any noted restrictions. Answers 'will battery X talk to inverter Y' — the question the scenario research found assistants hedge on with 'check the manufacturer's compatibility PDF' rather than stating the pairing.

factual compilation from manufacturer published compatibility documents; facts cited with attributed quotes, no document reproduced

Solar inverter–battery compatibility


**Inverter brand:** Victron

**Battery brand:** AXIstorage

**Battery model:** AXIstorage Li 7S / 9S

**Nominal voltage:** 48V

**Communication interface:** CAN-bus

**Supported system types:** ESS

**Restrictions or notes:** identical with the BMZ ESS hardware and software

> The AXIstorage 7S/ 9S is identical with the BMZ ESS hardware and software and therefore also compatible.

Source: <https://www.victronenergy.com/live/battery_compatibility:axistorage>

AXIstorage Li 7S / 9S — Solar inverter–battery compatibility

battery_model, communication_interface, inverter_brand, nominal_voltage


**Inverter brand:** Victron

**Battery brand:** BYD

**Battery model:** B-Box L 3.5-14.0

**Nominal voltage:** 48V

**Communication interface:** CAN-bus

**Minimum firmware:** Venus OS v2.42

**Supported system types:** ESS, Grid Backup

**Module capacity:** 3.5 kWh

**Restrictions or notes:** Off-Grid: no

> (*) with exception of the models “BlueSolar MPPT 150/70 CAN-bus” and “BlueSolar MPPT 150/85 CAN-bus” which are end-of-life since 2019. Legacy systems, historically installed with this configuration using the allow to charge contacts are not required to make any changes, see the legacy chapter below for details. 1.5 Battery compatibility The following batteries are supported: B-BOX LV series type | B-BOX Pro 2.5-10.0 | B-BOX Pro 12.8 | B-BOX Pro 13.8 | B-BOX Res 2.5-10.0 | B-BOX Compact | B-BOX L 3.5-14.0 | B-BOX Premium LVL 15.4 | B-BOX Premium LVS 4.0 | B-BOX LV Flex 5.0 | BYD also releases firmware update for their BMU and BMS. B-Box Pro BMU Firmware versions earlier than V4-13 are not compatible with Victron equipment and can cause the battery to not be detected. Minimum BYD firmware version for B-Box Pro: BMU_V2_V4-13_15-Mar-2017. On-screen, or via Remote Console on the <https://www.victronenergy.com/live/venus-os:start> GX device , this version is named v4.13. Batteries with older firmware versions can be updated. Please contact BYD for more information. BYD B-Box Premium batteries firmware should be no less than V1.4, and the BMS firmware should be no less than V1.3. If necessary, this can be updated automatically via the ethernet port on the BMU when connected to the internet. Victron is not compatible with the BYD HVS/HVM range of high-voltage batteries. 2. Minimum Battery Sizing The following information is provided by BYD, it is reproduced here for your convenience and should always be confirmed with the latest BYD manuals and specifications. Each B-Box Pro 2.5 battery module is approximately 50Ah at 48V (51.2V nominal).

Source: <https://www.victronenergy.com/live/battery_compatibility:byd_b-box>

B-Box L 3.5-14.0 — Solar inverter–battery compatibility

minimum_firmware, module_capacity, restrictions, system_types


**Inverter brand:** Victron

**Battery brand:** BYD

**Battery model:** B-Box Premium LVL 15.4

**Nominal voltage:** 48V

**Communication interface:** CAN-bus

**Minimum firmware:** Venus OS v2.52

**Supported system types:** ESS, Grid Backup, Off-grid

**Module capacity:** 15.36 kWh

> (*) with exception of the models “BlueSolar MPPT 150/70 CAN-bus” and “BlueSolar MPPT 150/85 CAN-bus” which are end-of-life since 2019. Legacy systems, historically installed with this configuration using the allow to charge contacts are not required to make any changes, see the legacy chapter below for details. 1.5 Battery compatibility The following batteries are supported: B-BOX LV series type | B-BOX Pro 2.5-10.0 | B-BOX Pro 12.8 | B-BOX Pro 13.8 | B-BOX Res 2.5-10.0 | B-BOX Compact | B-BOX L 3.5-14.0 | B-BOX Premium LVL 15.4 | B-BOX Premium LVS 4.0 | B-BOX LV Flex 5.0 | BYD also releases firmware update for their BMU and BMS. B-Box Pro BMU Firmware versions earlier than V4-13 are not compatible with Victron equipment and can cause the battery to not be detected. Minimum BYD firmware version for B-Box Pro: BMU_V2_V4-13_15-Mar-2017. On-screen, or via Remote Console on the <https://www.victronenergy.com/live/venus-os:start> GX device , this version is named v4.13. Batteries with older firmware versions can be updated. Please contact BYD for more information. BYD B-Box Premium batteries firmware should be no less than V1.4, and the BMS firmware should be no less than V1.3. If necessary, this can be updated automatically via the ethernet port on the BMU when connected to the internet. Victron is not compatible with the BYD HVS/HVM range of high-voltage batteries. 2. Minimum Battery Sizing The following information is provided by BYD, it is reproduced here for your convenience and should always be confirmed with the latest BYD manuals and specifications. Each B-Box Pro 2.5 battery module is approximately 50Ah at 48V (51.2V nominal).

Source: <https://www.victronenergy.com/live/battery_compatibility:byd_b-box>

B-Box Premium LVL 15.4 — Solar inverter–battery compatibility


**Inverter brand:** Victron

**Battery brand:** BYD

**Battery model:** B-Box Premium LVS 4.0

**Nominal voltage:** 48V

**Communication interface:** CAN-bus

**Minimum firmware:** Venus OS v2.52

**Supported system types:** ESS, Grid Backup, Off-grid

**Module capacity:** 4.0 kWh

> (*) with exception of the models “BlueSolar MPPT 150/70 CAN-bus” and “BlueSolar MPPT 150/85 CAN-bus” which are end-of-life since 2019. Legacy systems, historically installed with this configuration using the allow to charge contacts are not required to make any changes, see the legacy chapter below for details. 1.5 Battery compatibility The following batteries are supported: B-BOX LV series type | B-BOX Pro 2.5-10.0 | B-BOX Pro 12.8 | B-BOX Pro 13.8 | B-BOX Res 2.5-10.0 | B-BOX Compact | B-BOX L 3.5-14.0 | B-BOX Premium LVL 15.4 | B-BOX Premium LVS 4.0 | B-BOX LV Flex 5.0 | BYD also releases firmware update for their BMU and BMS. B-Box Pro BMU Firmware versions earlier than V4-13 are not compatible with Victron equipment and can cause the battery to not be detected. Minimum BYD firmware version for B-Box Pro: BMU_V2_V4-13_15-Mar-2017. On-screen, or via Remote Console on the <https://www.victronenergy.com/live/venus-os:start> GX device , this version is named v4.13. Batteries with older firmware versions can be updated. Please contact BYD for more information. BYD B-Box Premium batteries firmware should be no less than V1.4, and the BMS firmware should be no less than V1.3. If necessary, this can be updated automatically via the ethernet port on the BMU when connected to the internet. Victron is not compatible with the BYD HVS/HVM range of high-voltage batteries. 2. Minimum Battery Sizing The following information is provided by BYD, it is reproduced here for your convenience and should always be confirmed with the latest BYD manuals and specifications. Each B-Box Pro 2.5 battery module is approximately 50Ah at 48V (51.2V nominal).

Source: <https://www.victronenergy.com/live/battery_compatibility:byd_b-box>

B-Box Premium LVS 4.0 — Solar inverter–battery compatibility


**Inverter brand:** Victron

**Battery brand:** BYD

**Battery model:** B-Box Pro 2.5-10.0

**Nominal voltage:** 48V

**Communication interface:** CAN-bus

**Minimum firmware:** Venus OS v2.42

**Supported system types:** ESS, Grid Backup, Off-grid

**Module capacity:** 2.5 kWh

> 1.4 Solar Charger compatibility All 48V BlueSolar and SmartSolar VE.Direct MPPT Chargers are compatible (*). Some of our Solar Chargers feature a VE.Direct communication port, some feature a VE.Can communication port, and some feature both. Both of these types of communication ports can be used to connect the Solar charger to the GX Device. Such connection is mandatory, because it is used to regulate charge currents and voltages. When planning to use the VE.Can communications port to connect the Solar Charger(s), make sure to select a GX Device that has sufficient CAN-Bus ports. The Color Control GX has only one such port, its VE.Can port, and is therefor not suitable. All other GX Devices can be used, since they have two ports. One can then be used to connect the BYD battery, and the other to connect the Solar Charger. (*) with exception of the models “BlueSolar MPPT 150/70 CAN-bus” and “BlueSolar MPPT 150/85 CAN-bus” which are end-of-life since 2019. Legacy systems, historically installed with this configuration using the allow to charge contacts are not required to make any changes, see the legacy chapter below for details. 1.5 Battery compatibility The following batteries are supported: B-BOX LV series type | B-BOX Pro 2.5-10.0 | B-BOX Pro 12.8 | B-BOX Pro 13.8 | B-BOX Res 2.5-10.0 | B-BOX Compact | B-BOX L 3.5-14.0 | B-BOX Premium LVL 15.4 | B-BOX Premium LVS 4.0 | B-BOX LV Flex 5.0 | BYD also releases firmware update for their BMU and BMS. B-Box Pro BMU Firmware versions earlier than V4-13 are not compatible with Victron equipment and can cause the battery to not be detected.

Source: <https://www.victronenergy.com/live/battery_compatibility:byd_b-box>

B-Box Pro 2.5-10.0 — Solar inverter–battery compatibility


**Inverter brand:** GoodWe

**Battery brand:** BYD

**Battery model:** BatteryBox LV5.0+

**Nominal voltage:** 48V

**Communication interface:** CAN

**Supported system types:** On-grid

> BYD Battery-Box Premium LVL*2 LVL 15.4 ● ● ● ● ● Battery-Box Premium LVS Series*2 - ● ● ● ● ● BatteryBox LV5.0*3 LV5.0 ● ● ● ● BatteryBox LV5.0+*4 LV5.0+ ● ● ● ● ● ES/EM/SBP/BP:

Source: <https://en.goodwe.com/Ftp/EN/Downloads/User%20Manual/GW_Battery%20Compatibility%20Overview-EN.pdf>

BatteryBox LV5.0+ — Solar inverter–battery compatibility

communication_interface, inverter_brand, nominal_voltage, system_types


**Inverter brand:** GoodWe

**Battery brand:** BYD

**Battery model:** BatteryBox LV5.0

**Nominal voltage:** 48V

**Communication interface:** CAN

**Supported system types:** On-grid

> BYD Battery-Box Premium LVL*2 LVL 15.4 ● ● ● ● ● Battery-Box Premium LVS Series*2 - ● ● ● ● ● BatteryBox LV5.0*3 LV5.0 ● ● ● ● BatteryBox LV5.0+*4 LV5.0+ ● ● ● ● ● ES/EM/SBP/BP:

Source: <https://en.goodwe.com/Ftp/EN/Downloads/User%20Manual/GW_Battery%20Compatibility%20Overview-EN.pdf>

BatteryBox LV5.0 — Solar inverter–battery compatibility


**Inverter brand:** Victron

**Battery brand:** BattleBorn

**Battery model:** BattleBorn LiFePO4

**Communication interface:** None (drop-in)

**Supported system types:** Open-loop only

**Restrictions or notes:** there is no integration or communication, such CANbus, between the BattleBorn battery and the Victron system. Such communication is not required; and also not available. The BattleBorn batteries are self-contained drop-in style batteries.

> Note that there is no integration or communication, such CANbus, between the BattleBorn battery and the Victron system. Such communication is not required; and also not available. The BattleBorn batteries are self-contained drop-in style batteries.

Source: <https://www.victronenergy.com/live/battery_compatibility:battleborn>

BattleBorn LiFePO4 — Solar inverter–battery compatibility


**Inverter brand:** Victron

**Battery brand:** BlueNova Energy

**Battery model:** BlueNova Energy LiFePo4

**Nominal voltage:** 48V

**Communication interface:** CAN-bus

**Minimum firmware:** GX device v2.02

**Supported system types:** Off Grid, Backup, Energy Storage

> Victron + BlueNova Energy can be used for the following systems 1.Oﬀ Grid 2.Backup 3.Energy Storage

Source: <https://www.victronenergy.com/live/battery_compatibility:bluenova>

BlueNova Energy LiFePo4 — Solar inverter–battery compatibility

battery_model, communication_interface, minimum_firmware, nominal_voltage, system_types


**Inverter brand:** Victron

**Battery brand:** BSLBATT

**Battery model:** BSLBATT LiFePO4

**Communication interface:** BMS-Can

**Supported system types:** ESS, Grid Backup

> Victron + BSLBATT can be used for the following system types:

Source: <https://www.victronenergy.com/live/battery_compatibility:bsl>

BSLBATT LiFePO4 — Solar inverter–battery compatibility


**Inverter brand:** Victron

**Battery brand:** Discover

**Battery model:** Discover AES RACKMOUNT

**Communication interface:** CAN-bus

**Supported system types:** ESS, Grid Backup, Off-grid

> The AES RACKMOUNT and batteries can be used in an Energy Storage System (ESS) for self-consumption, Grid backup, and Off-grid applications.

Source: <https://www.victronenergy.com/live/battery_compatibility:discover>

Discover AES RACKMOUNT — Solar inverter–battery compatibility

battery_brand, battery_model, communication_interface, inverter_brand, system_types


**Inverter brand:** GoodWe

**Battery brand:** Dyness

**Battery model:** DL5.0C

**Nominal voltage:** 48V

**Communication interface:** CAN

**Minimum firmware:** ARM firmware versions 06 and above

**Supported system types:** On-grid

> DYNESS POWERBOX F-7.5 ● ● ● POWERBOX F-10.0 ● ● ● DL5.0C*2 ● ● ● GoodWe Battery Compatibility Overview-20260715-EN-V029.1 Information may be subject to change without notice. DYNESS-LV Series DL5.0X*3 ● ● A48100*4 ● ● POWER BOX G2*5 POWER BOX G2 ● ● ● POWER BRICK*6 POWER BRICK ● ● ● ES/EM/SBP/BP: *1. ARM firmware versions 07 and above are required for compatibility. ES G2/SBP G2: *2. ARM firmware versions 06 and above are required for compatibility.

Source: <https://en.goodwe.com/Ftp/EN/Downloads/User%20Manual/GW_Battery%20Compatibility%20Overview-EN.pdf>

DL5.0C — Solar inverter–battery compatibility


**Inverter brand:** Victron

**Battery brand:** Dyness

**Battery model:** Dyness LiFePO4

**Nominal voltage:** 48V

**Communication interface:** BMS-Can (500 kbit/s)

**Minimum firmware:** Venus OS v3.31

**Supported system types:** ESS, Grid Backup, Off-grid

> The minimum supported firmware version is v3.31. It is recommended to use the latest firmware version on new installations and when trouble shooting issues.

Source: <https://www.victronenergy.com/live/battery_compatibility:dyness>

Dyness LiFePO4 — Solar inverter–battery compatibility

battery_brand, battery_model, communication_interface, inverter_brand, minimum_firmware, nominal_voltage, system_types


**Inverter brand:** GoodWe

**Battery brand:** Dyness

**Battery model:** DYNESS-LV x1

**Nominal voltage:** 48V

**Communication interface:** CAN

**Minimum firmware:** ARM firmware versions 07 and above

**Supported system types:** On-grid

> ARM firmware versions 07 and above are required for compatibility. *3. ARM firmware versions 00 and above are required for compatibility. sales@goodwe.com www.goodwe.com Battery Compatibility Overview 1) Low-voltage Energy Storage Systems Battery Battery Battery Inverter Series Brand Series Model ES EM SBP ES G2 SBP G2 ES Uniq DYNESS-LV x1

Source: <https://en.goodwe.com/Ftp/EN/Downloads/User%20Manual/GW_Battery%20Compatibility%20Overview-EN.pdf>

DYNESS-LV x1 — Solar inverter–battery compatibility


**Inverter brand:** Victron

**Battery brand:** Cegasa

**Battery model:** EBick LV 15

**Nominal voltage:** 48V

**Communication interface:** CAN-bus

**Supported system types:** ESS, Grid Backup, Off-grid

**Module capacity:** 15 kWh

> CAN-Bus wiring between the battery and GX Device 4. VEConfigure settings 5. GX device configuration 6. Solar Charging 6.1 Victron MPPT charger settings 6.2 Self-Startup from Low voltage shutdown modes 7. Troubleshooting 8. Known Issues with Cegesa models 9. Cold Weather Performance 10. Further Information Victron & Cegasa Battery | EBick LV | EBick LV 15 | Appearance | <https://www.victronenergy.com/live/_detail/battery_compatibility:ebick-lv-front.png?id=battery_compatibility%3Acegasa> | <https://www.victronenergy.com/live/_detail/battery_compatibility:ebick-lv-front.png?id=battery_compatibility%3Acegasa> | ESS | yes | yes | Grid Backup | yes | yes | Off-Grid | yes | yes | Module capacity | 13.5 kWh | 15 kWh |

Source: <https://www.victronenergy.com/live/battery_compatibility:cegasa>

EBick LV 15 — Solar inverter–battery compatibility


**Inverter brand:** Victron

**Battery brand:** Cegasa

**Battery model:** EBick LV

**Nominal voltage:** 48V

**Communication interface:** CAN-bus

**Supported system types:** ESS, Grid Backup, Off-grid

**Module capacity:** 13.5 kWh

> CAN-Bus ports. The Color Control GX has only one such port, its VE.Can port, and is therefor not suitable. All other GX Devices can be used, since they have two ports. One can then be used to connect the Cegasa battery, and the other to connect the Solar Charger. 1.5 Battery compatibility The following batteries are supported: Cegasa series type | EBick LV | The EBick LV has an external BMS (MCS master box) which connects to the Victron GX device. Victron is not compatible with the Cegasa high voltage configuration where battery voltage is increased beyond 48V nominal. The Cegasa eBick 280 Pro product documentation mentions up 2-3 MWh capacity, this is due to the ability of the eBick 280 Pro to be able to be installed in series as well as parallel, HOWEVER Victron systems do NOT support the series connection configuration, hence the lower max 18 module capacity limit. See the Cegasa manuals for more details. 2. Minimum Battery Sizing The following information is provided by Cegasa, it is reproduced here for your convenience and should always be confirmed with the latest Cegasa manuals and specifications. Each Cegasa eBick LV battery module is 13.5 kWh, approximately 280Ah at 48V (52.2V maximum).

Source: <https://www.victronenergy.com/live/battery_compatibility:cegasa>

EBick LV — Solar inverter–battery compatibility


**Inverter brand:** Victron

**Battery brand:** BMZ

**Battery model:** ESS 7.0

**Nominal voltage:** 48V

**Communication interface:** CAN-bus

**Minimum firmware:** GX device v1.72

**Supported system types:** ESS

**Restrictions or notes:** BMZ batteries can only be used in a Victron ESS installation installation that uses the ESS Assistant.

> Compatible BMZ models: ESS 7.0 ESS 9.0 ESS X ESS Z

Source: <https://www.victronenergy.com/live/battery_compatibility:bmz_ess>

ESS 7.0 — Solar inverter–battery compatibility

communication_interface, inverter_brand, minimum_firmware, nominal_voltage, restrictions


**Inverter brand:** Victron

**Battery brand:** BMZ

**Battery model:** ESS 9.0

**Nominal voltage:** 48V

**Communication interface:** CAN-bus

**Minimum firmware:** GX device v1.72

**Supported system types:** ESS

**Restrictions or notes:** BMZ batteries can only be used in a Victron ESS installation installation that uses the ESS Assistant.

> Compatible BMZ models: ESS 7.0 ESS 9.0 ESS X ESS Z

Source: <https://www.victronenergy.com/live/battery_compatibility:bmz_ess>

ESS 9.0 — Solar inverter–battery compatibility


**Inverter brand:** Victron

**Battery brand:** BMZ

**Battery model:** ESS X

**Nominal voltage:** 48V

**Communication interface:** CAN-bus

**Minimum firmware:** GX device v1.72

**Supported system types:** ESS

**Restrictions or notes:** BMZ batteries can only be used in a Victron ESS installation installation that uses the ESS Assistant.

> Compatible BMZ models: ESS 7.0 ESS 9.0 ESS X ESS Z

Source: <https://www.victronenergy.com/live/battery_compatibility:bmz_ess>

ESS X — Solar inverter–battery compatibility


**Inverter brand:** Victron

**Battery brand:** BMZ

**Battery model:** ESS Z

**Nominal voltage:** 48V

**Communication interface:** CAN-bus

**Minimum firmware:** GX device v1.72

**Supported system types:** ESS

**Restrictions or notes:** BMZ batteries can only be used in a Victron ESS installation installation that uses the ESS Assistant.

> Compatible BMZ models: ESS 7.0 ESS 9.0 ESS X ESS Z

Source: <https://www.victronenergy.com/live/battery_compatibility:bmz_ess>

ESS Z — Solar inverter–battery compatibility


**Inverter brand:** GoodWe

**Battery brand:** Tecloman

**Battery model:** Firefly-7.2K

**Nominal voltage:** 48V

**Communication interface:** CAN

**Minimum firmware:** ARM firmware versions 12 and above

**Supported system types:** On-grid

> Battery Brand Battery Series Battery Model ES EM SBP ES G2 SBP G2 ES Uniq Soluna 4K Pack ● ● ● Soluna LV (48V) Battery Series Soluna 5K Pack ● ● ● Soluna EOS 5K Pack ● ● ● Battery Brand Battery Series Battery Model ES EM SBP ES G2 SBP G2 ES Uniq Smile5-BAT Series SMILE5-BAT*2 ● ● ● Smile-BAT-10.1P*2 ● ● ● Smile-BAT Series Smile-BAT-10.3P*2 ● ● ● ALPHA*1 Smile-BAT-13.3P*3 ● ● ● M48112-P Series M48112-P*3 ● ● ● M48100-P Series M48100-P*3 ● ● ● ES/EM/SBP/BP: *1. CAN communication line sequence of ALPHA-ESS battery does not match GoodWe inverters. A matching solution provided by ALPHA-ESS is required. *2. ARM firmware versions 10 and above are required for compatibility. *3. ARM firmware versions 11 and above are required for compatibility. Battery Brand Battery Series Battery Model ES EM SBP ES G2 SBP G2 ES Uniq Firefly-3.6K ● ● ● Firefly-7.2K ● ● ● Firefly-10.8K ● ● ● Tecloman Firefly Series*1 Firefly-14.4K ● ● ● Firefly-18.0K ● ● ● Firefly-21.6K ● ● ● Firefly-25.2K ● ● ● ES/EM/SBP: *1. ARM firmware versions 12 and above are required for compatibility.

Source: <https://en.goodwe.com/Ftp/EN/Downloads/User%20Manual/GW_Battery%20Compatibility%20Overview-EN.pdf>

Firefly-7.2K — Solar inverter–battery compatibility


**Inverter brand:** Sunways

**Battery brand:** Pylontech

**Battery model:** Force H1/H2

**Communication interface:** CAN

**Minimum firmware:** ARM: V0054

**Supported system types:** On/off-grid

> Pylontech ESS and Inverters Ver.2.35.xlsx High Voltage ESS Last Update: 2025/1/21 Key Features Activation Inverter Inverter Type Battery COMM. Application Force Firmware Ver Installation Brand Charge ABH1002AA ISS 1Play 3TL / 6TL CAN On/off-grid Yes Yes Wall mounting Ingeteam Power ABH1003_Q(disp) Technology ABH1007_A ISS 1Play 3TL M / 6TL M CAN On/off-grid Yes Yes Wall mounting ABH1003_Q(disp) RHI-3P-HVES-5G series S6-EH3P(5-10)K-H-EU Solis CAN On/off-grid Yes Yes Wall mounting S6-EH1P(3.8-11.4)K-H-US S6-EH3P(12-20)K-H S6-EH3P(29.9-50)K-H b SMA Solar SBS 3.7-10 - SBS6.0-10 CAN On/off-grid Yes Yes 04.04.03.R Wall mounting Technology AG PLENTICORE plus c PLENTICORE plus G2 KOSTAL Industrie PLENTICORE BI xx/26 RS485 On/off-grid Yes Yes Wall mounting Elektrik GmbH PLENTICORE BI xx/26 G2 PLENTICORE G3 KACO NH3 Series Powercube CAN On/off-grid Yes Yes Wall mounting X1/X2/H1/H2 SAPPHIRE- Sungrow SH5.0/6.0/8.0/10.0RT Powercube CAN On/off-grid Yes Yes Wall mounting H_V11_V01_A X1/X2/H1/H2-V2 Delios s.r.l. DLX HV series Powercube-M1C CAN On/off-grid Yes Yes V3.00 Wall mounting EH/BH series Force H1/H2 Goodwe ET/BT 5-10kW Force H1/H2-V2 CAN On/off-grid Yes Yes V14 Wall mounting GW40K/50K-ET Force-H3 EATON xStorage Home 3P Series CAN On/off-grid Yes Yes V3.00 Wall mounting SolarMax ES-T Series CAN On/off-grid Yes Yes V3.00 Wall mounting SUN-5~25K-SG01HP3-EU/AU Deye(Sunsynk) a CAN On/off-grid Yes Yes 2001-X018 Wall mounting SUN-29.9~50K-SG01HP3-EU/AU 30K-3P-208V-N Sol-Ark CAN On/off-grid Yes Yes 1066 Wall mounting 60K-3P-480V-N Lux Power Hybrid HB series CAN On/off-grid Yes Yes Wall mounting RB-HVS(ST10000)(1) V2.6(1) Redback Modbus RTU On/off-grid Yes Yes Cabinet RB-HVS-AC(SB7200)(2) V2.9(2) FW: D0110036 Sofar HYD 10000/15000/20000 TL-3PH CAN On/off-grid Yes Yes Wall mounting DSP: V010027 STH-4-12KTL-HT series STH-3-8KTL-HS series Sunways CAN On/off-grid Yes Yes ARM: V0054

Source: <https://pylonwebs3.s3.amazonaws.com/upload_us/2025/02/10/Compatibility%20List%20of%20Pylontech%20ESS%20and%20Inverters%20Ver.2.35_20250210103505A665.pdf>

Force H1/H2 — Solar inverter–battery compatibility


**Inverter brand:** KOYOE

**Battery brand:** Pylontech

**Battery model:** Force H1/H2

**Communication interface:** CAN

**Minimum firmware:** 320701

**Supported system types:** On/off-grid

> KOYOE KY-EST06KH~KY-EST20KH CAN On/off-grid Yes Yes 320701

Source: <https://pylonwebs3.s3.amazonaws.com/upload_us/2025/02/10/Compatibility%20List%20of%20Pylontech%20ESS%20and%20Inverters%20Ver.2.35_20250210103505A665.pdf>


**Inverter brand:** Voltronic

**Battery brand:** Pylontech

**Battery model:** Force H1/H2

**Communication interface:** Modbus RTU

**Minimum firmware:** 2008.27.12

**Supported system types:** On/off-grid

> Voltronic Infinisolar TX-PA 30K Modbus RTU On/off-grid Yes Yes 2008.27.12

Source: <https://pylonwebs3.s3.amazonaws.com/upload_us/2025/02/10/Compatibility%20List%20of%20Pylontech%20ESS%20and%20Inverters%20Ver.2.35_20250210103505A665.pdf>


**Inverter brand:** Lux Power

**Battery brand:** Pylontech

**Battery model:** Force H1/H2

**Communication interface:** CAN

**Supported system types:** On/off-grid

> Lux Power Hybrid HB series CAN On/off-grid Yes Yes

Source: <https://pylonwebs3.s3.amazonaws.com/upload_us/2025/02/10/Compatibility%20List%20of%20Pylontech%20ESS%20and%20Inverters%20Ver.2.35_20250210103505A665.pdf>


**Inverter brand:** Redback

**Battery brand:** Pylontech

**Battery model:** Force H1/H2

**Communication interface:** Modbus RTU

**Minimum firmware:** V2.6

**Supported system types:** On/off-grid

> Pylontech ESS and Inverters Ver.2.35.xlsx High Voltage ESS Last Update: 2025/1/21 Key Features Activation Inverter Inverter Type Battery COMM. Application Force Firmware Ver Installation Brand Charge ABH1002AA ISS 1Play 3TL / 6TL CAN On/off-grid Yes Yes Wall mounting Ingeteam Power ABH1003_Q(disp) Technology ABH1007_A ISS 1Play 3TL M / 6TL M CAN On/off-grid Yes Yes Wall mounting ABH1003_Q(disp) RHI-3P-HVES-5G series S6-EH3P(5-10)K-H-EU Solis CAN On/off-grid Yes Yes Wall mounting S6-EH1P(3.8-11.4)K-H-US S6-EH3P(12-20)K-H S6-EH3P(29.9-50)K-H b SMA Solar SBS 3.7-10 - SBS6.0-10 CAN On/off-grid Yes Yes 04.04.03.R Wall mounting Technology AG PLENTICORE plus c PLENTICORE plus G2 KOSTAL Industrie PLENTICORE BI xx/26 RS485 On/off-grid Yes Yes Wall mounting Elektrik GmbH PLENTICORE BI xx/26 G2 PLENTICORE G3 KACO NH3 Series Powercube CAN On/off-grid Yes Yes Wall mounting X1/X2/H1/H2 SAPPHIRE- Sungrow SH5.0/6.0/8.0/10.0RT Powercube CAN On/off-grid Yes Yes Wall mounting H_V11_V01_A X1/X2/H1/H2-V2 Delios s.r.l. DLX HV series Powercube-M1C CAN On/off-grid Yes Yes V3.00 Wall mounting EH/BH series Force H1/H2 Goodwe ET/BT 5-10kW Force H1/H2-V2 CAN On/off-grid Yes Yes V14 Wall mounting GW40K/50K-ET Force-H3 EATON xStorage Home 3P Series CAN On/off-grid Yes Yes V3.00 Wall mounting SolarMax ES-T Series CAN On/off-grid Yes Yes V3.00 Wall mounting SUN-5~25K-SG01HP3-EU/AU Deye(Sunsynk) a CAN On/off-grid Yes Yes 2001-X018 Wall mounting SUN-29.9~50K-SG01HP3-EU/AU 30K-3P-208V-N Sol-Ark CAN On/off-grid Yes Yes 1066 Wall mounting 60K-3P-480V-N Lux Power Hybrid HB series CAN On/off-grid Yes Yes Wall mounting RB-HVS(ST10000)(1) V2.6(1) Redback Modbus RTU On/off-grid Yes Yes Cabinet RB-HVS-AC(SB7200)(2) V2.9(2) FW:

Source: <https://pylonwebs3.s3.amazonaws.com/upload_us/2025/02/10/Compatibility%20List%20of%20Pylontech%20ESS%20and%20Inverters%20Ver.2.35_20250210103505A665.pdf>


**Inverter brand:** Sofar

**Battery brand:** Pylontech

**Battery model:** Force H1/H2

**Communication interface:** CAN

**Minimum firmware:** FW: D0110036 DSP: V010027

**Supported system types:** On/off-grid

> Pylontech ESS and Inverters Ver.2.35.xlsx High Voltage ESS Last Update: 2025/1/21 Key Features Activation Inverter Inverter Type Battery COMM. Application Force Firmware Ver Installation Brand Charge ABH1002AA ISS 1Play 3TL / 6TL CAN On/off-grid Yes Yes Wall mounting Ingeteam Power ABH1003_Q(disp) Technology ABH1007_A ISS 1Play 3TL M / 6TL M CAN On/off-grid Yes Yes Wall mounting ABH1003_Q(disp) RHI-3P-HVES-5G series S6-EH3P(5-10)K-H-EU Solis CAN On/off-grid Yes Yes Wall mounting S6-EH1P(3.8-11.4)K-H-US S6-EH3P(12-20)K-H S6-EH3P(29.9-50)K-H b SMA Solar SBS 3.7-10 - SBS6.0-10 CAN On/off-grid Yes Yes 04.04.03.R Wall mounting Technology AG PLENTICORE plus c PLENTICORE plus G2 KOSTAL Industrie PLENTICORE BI xx/26 RS485 On/off-grid Yes Yes Wall mounting Elektrik GmbH PLENTICORE BI xx/26 G2 PLENTICORE G3 KACO NH3 Series Powercube CAN On/off-grid Yes Yes Wall mounting X1/X2/H1/H2 SAPPHIRE- Sungrow SH5.0/6.0/8.0/10.0RT Powercube CAN On/off-grid Yes Yes Wall mounting H_V11_V01_A X1/X2/H1/H2-V2 Delios s.r.l. DLX HV series Powercube-M1C CAN On/off-grid Yes Yes V3.00 Wall mounting EH/BH series Force H1/H2 Goodwe ET/BT 5-10kW Force H1/H2-V2 CAN On/off-grid Yes Yes V14 Wall mounting GW40K/50K-ET Force-H3 EATON xStorage Home 3P Series CAN On/off-grid Yes Yes V3.00 Wall mounting SolarMax ES-T Series CAN On/off-grid Yes Yes V3.00 Wall mounting SUN-5~25K-SG01HP3-EU/AU Deye(Sunsynk) a CAN On/off-grid Yes Yes 2001-X018 Wall mounting SUN-29.9~50K-SG01HP3-EU/AU 30K-3P-208V-N Sol-Ark CAN On/off-grid Yes Yes 1066 Wall mounting 60K-3P-480V-N Lux Power Hybrid HB series CAN On/off-grid Yes Yes Wall mounting RB-HVS(ST10000)(1) V2.6(1) Redback Modbus RTU On/off-grid Yes Yes Cabinet RB-HVS-AC(SB7200)(2) V2.9(2) FW: D0110036 Sofar HYD 10000/15000/20000 TL-3PH CAN On/off-grid Yes Yes Wall mounting DSP:

Source: <https://pylonwebs3.s3.amazonaws.com/upload_us/2025/02/10/Compatibility%20List%20of%20Pylontech%20ESS%20and%20Inverters%20Ver.2.35_20250210103505A665.pdf>


**Inverter brand:** Hoymiles

**Battery brand:** Pylontech

**Battery model:** Force H1/H2

**Communication interface:** CAN

**Minimum firmware:** Power - V00.04.07 Safety - V00.04.06 System - V00.02.18

**Supported system types:** On/off-grid

> service@pylontech.com.cnX1/X2/H1/H2 Powercube X1/X2/H1/H2-V2 1/8 Powercube-M1C Force H1/H2 Compatibility List of Pylontech ESS and Inverters Ver.2.35.xlsx High Voltage ESS Last Update: 2025/1/21 Key Features Activation Inverter Inverter Type Battery COMM. Application Force Firmware Ver Installation Brand Charge ASW06H/08H/10H/12H/15H-T1(1) DSP:1.04.00(1) AISWEI(Solplan ASW05kH/06kH/08kH/10kH/12kH- Powercube ARM:V610-60005- CAN On/off-grid Yes Yes Wall mounting et) T2(2) X1/X2/H1/H2 02(1) ASW08kH/10kH/12kH-T3(2) Powercube V610-05001-00(2) X1/X2/H1/H2-V2 MHT-4~20K Series Powercube-M1C MHT-25~50K Series Force H1/H2 MHS-3~8K Series Force H1/H2-V2 SOLINTEG CAN On/off-grid Yes Yes ARM: V01(08) Wall mounting MRT-4~20K Series Force-H3 MRT-25~50K Series MRS-3~8K Series ETH-3~8KTL-HS Series ETEK ETH-4~20KTL-HT Series CAN On/off-grid Yes Yes ARM: V01(08) Wall mounting ETH-25~50KTL-HT Series ARM:V1.02.13 R6~15KH3 Series MEGAREVO CAN On/off-grid Yes Yes DSP:V1.03.14 Wall mounting ARM:V1.01.41 R5~12KH1NA Series DSP:V1.02.20 HYT-HV Series Power - V00.04.07 Hoymiles

Source: <https://pylonwebs3.s3.amazonaws.com/upload_us/2025/02/10/Compatibility%20List%20of%20Pylontech%20ESS%20and%20Inverters%20Ver.2.35_20250210103505A665.pdf>


**Inverter brand:** MEGAREVO

**Battery brand:** Pylontech

**Battery model:** Force H1/H2

**Communication interface:** CAN

**Minimum firmware:** ARM:V1.02.13 DSP:V1.03.14

**Supported system types:** On/off-grid

> service@pylontech.com.cnX1/X2/H1/H2 Powercube X1/X2/H1/H2-V2 1/8 Powercube-M1C Force H1/H2 Compatibility List of Pylontech ESS and Inverters Ver.2.35.xlsx High Voltage ESS Last Update: 2025/1/21 Key Features Activation Inverter Inverter Type Battery COMM. Application Force Firmware Ver Installation Brand Charge ASW06H/08H/10H/12H/15H-T1(1) DSP:1.04.00(1) AISWEI(Solplan ASW05kH/06kH/08kH/10kH/12kH- Powercube ARM:V610-60005- CAN On/off-grid Yes Yes Wall mounting et) T2(2) X1/X2/H1/H2 02(1) ASW08kH/10kH/12kH-T3(2) Powercube V610-05001-00(2) X1/X2/H1/H2-V2 MHT-4~20K Series Powercube-M1C MHT-25~50K Series Force H1/H2 MHS-3~8K Series Force H1/H2-V2 SOLINTEG CAN On/off-grid Yes Yes ARM: V01(08) Wall mounting MRT-4~20K Series Force-H3 MRT-25~50K Series MRS-3~8K Series ETH-3~8KTL-HS Series ETEK ETH-4~20KTL-HT Series CAN On/off-grid Yes Yes ARM: V01(08) Wall mounting ETH-25~50KTL-HT Series ARM:V1.02.13 R6~15KH3 Series MEGAREVO

Source: <https://pylonwebs3.s3.amazonaws.com/upload_us/2025/02/10/Compatibility%20List%20of%20Pylontech%20ESS%20and%20Inverters%20Ver.2.35_20250210103505A665.pdf>


**Inverter brand:** INVT

**Battery brand:** Pylontech

**Battery model:** Force H1/H2

**Communication interface:** CAN

**Minimum firmware:** 208-208-0-319

**Supported system types:** On/off-grid

> INVT XD5/6/8/10/12KTR CAN On/off-grid Yes Yes 208-208-0-319

Source: <https://pylonwebs3.s3.amazonaws.com/upload_us/2025/02/10/Compatibility%20List%20of%20Pylontech%20ESS%20and%20Inverters%20Ver.2.35_20250210103505A665.pdf>


**Inverter brand:** Afore

**Battery brand:** Pylontech

**Battery model:** Force H1/H2

**Communication interface:** CAN

**Minimum firmware:** 1.01

**Supported system types:** On/off-grid

> service@pylontech.com.cnX1/X2/H1/H2 Powercube X1/X2/H1/H2-V2 1/8 Powercube-M1C Force H1/H2 Compatibility List of Pylontech ESS and Inverters Ver.2.35.xlsx High Voltage ESS Last Update: 2025/1/21 Key Features Activation Inverter Inverter Type Battery COMM. Application Force Firmware Ver Installation Brand Charge ASW06H/08H/10H/12H/15H-T1(1) DSP:1.04.00(1) AISWEI(Solplan ASW05kH/06kH/08kH/10kH/12kH- Powercube ARM:V610-60005- CAN On/off-grid Yes Yes Wall mounting et) T2(2) X1/X2/H1/H2 02(1) ASW08kH/10kH/12kH-T3(2) Powercube V610-05001-00(2) X1/X2/H1/H2-V2 MHT-4~20K Series Powercube-M1C MHT-25~50K Series Force H1/H2 MHS-3~8K Series Force H1/H2-V2 SOLINTEG CAN On/off-grid Yes Yes ARM: V01(08) Wall mounting MRT-4~20K Series Force-H3 MRT-25~50K Series MRS-3~8K Series ETH-3~8KTL-HS Series ETEK ETH-4~20KTL-HT Series CAN On/off-grid Yes Yes ARM: V01(08) Wall mounting ETH-25~50KTL-HT Series ARM:V1.02.13 R6~15KH3 Series MEGAREVO CAN On/off-grid Yes Yes DSP:V1.03.14 Wall mounting ARM:V1.01.41 R5~12KH1NA Series DSP:V1.02.20 HYT-HV Series Power - V00.04.07 Hoymiles CAN On/off-grid Yes Yes Safety - V00.04.06 Wall mounting HAT-HV Series System - V00.02.18 KOYOE KY-EST06KH~KY-EST20KH CAN On/off-grid Yes Yes 320701 Wall mounting INVT XD5/6/8/10/12KTR CAN On/off-grid Yes Yes 208-208-0-319 Wall mounting AF3~9.6K-DH Series AF3~30K-TH Series AF3~12K-THP Series AF3~17K-THA Series AF3~6K-THC Series Afore AF3~15K-THM Series CAN On/off-grid Yes Yes 1.01

Source: <https://pylonwebs3.s3.amazonaws.com/upload_us/2025/02/10/Compatibility%20List%20of%20Pylontech%20ESS%20and%20Inverters%20Ver.2.35_20250210103505A665.pdf>


**Inverter brand:** ATESS

**Battery brand:** Pylontech

**Battery model:** Force H1/H2

**Communication interface:** CAN

**Minimum firmware:** HPS30K_150K_HV3_SV9.1.39

**Supported system types:** On/off-grid

> ATESS HPS30/50/100/120/150 CAN On/off-grid Yes Yes

Source: <https://pylonwebs3.s3.amazonaws.com/upload_us/2025/02/10/Compatibility%20List%20of%20Pylontech%20ESS%20and%20Inverters%20Ver.2.35_20250210103505A665.pdf>


**Inverter brand:** KOSTAL Industrie Elektrik GmbH

**Battery brand:** Pylontech

**Battery model:** Force H1/H2-V2

**Communication interface:** RS485

**Supported system types:** On/off-grid

**Restrictions or notes:** Only Force-H1-V2 and Force-H2-V2, Force-H3 are compatible with Kostal PLENTICORE series inverter mentioned in the list above.

> Pylontech ESS and Inverters Ver.2.35.xlsx High Voltage ESS Last Update: 2025/1/21 Key Features Activation Inverter Inverter Type Battery COMM. Application Force Firmware Ver Installation Brand Charge ABH1002AA ISS 1Play 3TL / 6TL CAN On/off-grid Yes Yes Wall mounting Ingeteam Power ABH1003_Q(disp) Technology ABH1007_A ISS 1Play 3TL M / 6TL M CAN On/off-grid Yes Yes Wall mounting ABH1003_Q(disp) RHI-3P-HVES-5G series S6-EH3P(5-10)K-H-EU Solis CAN On/off-grid Yes Yes Wall mounting S6-EH1P(3.8-11.4)K-H-US S6-EH3P(12-20)K-H S6-EH3P(29.9-50)K-H b SMA Solar SBS 3.7-10 - SBS6.0-10 CAN On/off-grid Yes Yes 04.04.03.R Wall mounting Technology AG PLENTICORE plus c PLENTICORE plus G2 KOSTAL Industrie PLENTICORE BI xx/26 RS485 On/off-grid Yes Yes Wall mounting Elektrik GmbH PLENTICORE BI xx/26 G2 PLENTICORE G3 KACO NH3 Series Powercube CAN On/off-grid Yes Yes Wall mounting X1/X2/H1/H2 SAPPHIRE- Sungrow SH5.0/6.0/8.0/10.0RT Powercube CAN On/off-grid Yes Yes Wall mounting H_V11_V01_A X1/X2/H1/H2-V2 Delios s.r.l. DLX HV series Powercube-M1C CAN On/off-grid Yes Yes V3.00 Wall mounting EH/BH series Force H1/H2 Goodwe ET/BT 5-10kW Force H1/H2-V2 CAN On/off-grid

Source: <https://pylonwebs3.s3.amazonaws.com/upload_us/2025/02/10/Compatibility%20List%20of%20Pylontech%20ESS%20and%20Inverters%20Ver.2.35_20250210103505A665.pdf>

Force H1/H2-V2 — Solar inverter–battery compatibility


**Inverter brand:** GoodWe

**Battery brand:** Pylontech

**Battery model:** Force H1/H2-V2

**Communication interface:** CAN

**Minimum firmware:** V14

**Supported system types:** On/off-grid

> Pylontech ESS and Inverters Ver.2.35.xlsx High Voltage ESS Last Update: 2025/1/21 Key Features Activation Inverter Inverter Type Battery COMM. Application Force Firmware Ver Installation Brand Charge ABH1002AA ISS 1Play 3TL / 6TL CAN On/off-grid Yes Yes Wall mounting Ingeteam Power ABH1003_Q(disp) Technology ABH1007_A ISS 1Play 3TL M / 6TL M CAN On/off-grid Yes Yes Wall mounting ABH1003_Q(disp) RHI-3P-HVES-5G series S6-EH3P(5-10)K-H-EU Solis CAN On/off-grid Yes Yes Wall mounting S6-EH1P(3.8-11.4)K-H-US S6-EH3P(12-20)K-H S6-EH3P(29.9-50)K-H b SMA Solar SBS 3.7-10 - SBS6.0-10 CAN On/off-grid Yes Yes 04.04.03.R Wall mounting Technology AG PLENTICORE plus c PLENTICORE plus G2 KOSTAL Industrie PLENTICORE BI xx/26 RS485 On/off-grid Yes Yes Wall mounting Elektrik GmbH PLENTICORE BI xx/26 G2 PLENTICORE G3 KACO NH3 Series Powercube CAN On/off-grid Yes Yes Wall mounting X1/X2/H1/H2 SAPPHIRE- Sungrow SH5.0/6.0/8.0/10.0RT Powercube CAN On/off-grid Yes Yes Wall mounting H_V11_V01_A X1/X2/H1/H2-V2 Delios s.r.l. DLX HV series Powercube-M1C CAN On/off-grid Yes Yes V3.00 Wall mounting EH/BH series Force H1/H2 Goodwe ET/BT 5-10kW Force H1/H2-V2 CAN On/off-grid Yes Yes V14

Source: <https://pylonwebs3.s3.amazonaws.com/upload_us/2025/02/10/Compatibility%20List%20of%20Pylontech%20ESS%20and%20Inverters%20Ver.2.35_20250210103505A665.pdf>


**Inverter brand:** SMA Solar Technology AG

**Battery brand:** Pylontech

**Battery model:** Force H1/H2-V2

**Communication interface:** CAN

**Minimum firmware:** 04.04.03.R

**Supported system types:** On/off-grid

**Restrictions or notes:** Only Force-H1-V2 and Force-H2-V2 are compatible with SMA Sunny Boy Storage inverters mentioned in the list above.

> Pylontech ESS and Inverters Ver.2.35.xlsx High Voltage ESS Last Update: 2025/1/21 Key Features Activation Inverter Inverter Type Battery COMM. Application Force Firmware Ver Installation Brand Charge ABH1002AA ISS 1Play 3TL / 6TL CAN On/off-grid Yes Yes Wall mounting Ingeteam Power ABH1003_Q(disp) Technology ABH1007_A ISS 1Play 3TL M / 6TL M CAN On/off-grid Yes Yes Wall mounting ABH1003_Q(disp) RHI-3P-HVES-5G series S6-EH3P(5-10)K-H-EU Solis CAN On/off-grid Yes Yes Wall mounting S6-EH1P(3.8-11.4)K-H-US S6-EH3P(12-20)K-H S6-EH3P(29.9-50)K-H b SMA Solar SBS 3.7-10 - SBS6.0-10 CAN On/off-grid Yes Yes 04.04.03.R Wall mounting Technology AG PLENTICORE plus c PLENTICORE plus G2 KOSTAL Industrie PLENTICORE BI xx/26 RS485 On/off-grid Yes Yes Wall mounting Elektrik GmbH PLENTICORE BI xx/26 G2 PLENTICORE G3 KACO NH3 Series Powercube CAN On/off-grid Yes Yes Wall mounting X1/X2/H1/H2 SAPPHIRE- Sungrow SH5.0/6.0/8.0/10.0RT Powercube CAN On/off-grid Yes Yes Wall mounting H_V11_V01_A X1/X2/H1/H2-V2 Delios s.r.l. DLX HV series Powercube-M1C CAN On/off-grid Yes Yes V3.00 Wall mounting EH/BH series Force H1/H2 Goodwe ET/BT 5-10kW Force H1/H2-V2 CAN On/off-grid

Source: <https://pylonwebs3.s3.amazonaws.com/upload_us/2025/02/10/Compatibility%20List%20of%20Pylontech%20ESS%20and%20Inverters%20Ver.2.35_20250210103505A665.pdf>


**Inverter brand:** Solis

**Battery brand:** Pylontech

**Battery model:** Force H1/H2

**Communication interface:** CAN

**Supported system types:** On/off-grid

> Pylontech ESS and Inverters Ver.2.35.xlsx High Voltage ESS Last Update: 2025/1/21 Key Features Activation Inverter Inverter Type Battery COMM. Application Force Firmware Ver Installation Brand Charge ABH1002AA ISS 1Play 3TL / 6TL CAN On/off-grid Yes Yes Wall mounting Ingeteam Power ABH1003_Q(disp) Technology ABH1007_A ISS 1Play 3TL M / 6TL M CAN On/off-grid Yes Yes Wall mounting ABH1003_Q(disp) RHI-3P-HVES-5G series S6-EH3P(5-10)K-H-EU Solis CAN On/off-grid Yes Yes Wall mounting S6-EH1P(3.8-11.4)K-H-US S6-EH3P(12-20)K-H S6-EH3P(29.9-50)K-H b SMA Solar SBS 3.7-10 - SBS6.0-10 CAN On/off-grid Yes Yes 04.04.03.R Wall mounting Technology AG PLENTICORE plus c PLENTICORE plus G2 KOSTAL Industrie PLENTICORE BI xx/26 RS485 On/off-grid Yes Yes Wall mounting Elektrik GmbH PLENTICORE BI xx/26 G2 PLENTICORE G3 KACO NH3 Series Powercube CAN On/off-grid Yes Yes Wall mounting X1/X2/H1/H2 SAPPHIRE- Sungrow SH5.0/6.0/8.0/10.0RT Powercube CAN On/off-grid Yes Yes Wall mounting H_V11_V01_A X1/X2/H1/H2-V2 Delios s.r.l. DLX HV series Powercube-M1C CAN On/off-grid Yes Yes V3.00 Wall mounting EH/BH series Force H1/H2 Goodwe ET/BT 5-10kW Force H1/H2-V2 CAN On/off-grid

Source: <https://pylonwebs3.s3.amazonaws.com/upload_us/2025/02/10/Compatibility%20List%20of%20Pylontech%20ESS%20and%20Inverters%20Ver.2.35_20250210103505A665.pdf>


**Inverter brand:** GoodWe

**Battery brand:** Pylontech

**Battery model:** Force-H1

**Communication interface:** CAN

**Minimum firmware:** ARM firmware versions 14 and above

**Supported system types:** On-grid

> Force-H1 ● ● ● ● PYLON Force H2 Series Force-H2 ● ● ● ● Force H3 Series*3 Force-H3 ● ● ● ● **.Including EH Series :EH PLUS EH/BH/BT: *1. ARM firmware versions 07 and above are required for compatibility. Please note that the nominal voltage of POWERCUBE-H1-48 Series must be within the Battery Voltage Range of GoodWe inverters. Maximum 8 units for EH/BH. *2. ARM firmware versions 14 and above are required for compatibility.

Source: <https://en.goodwe.com/Ftp/EN/Downloads/User%20Manual/GW_Battery%20Compatibility%20Overview-EN.pdf>

Force-H1 — Solar inverter–battery compatibility


**Inverter brand:** SOLINTEG

**Battery brand:** Pylontech

**Battery model:** Force-H3

**Communication interface:** CAN

**Minimum firmware:** ARM: V01(08)

**Supported system types:** On/off-grid

> service@pylontech.com.cnX1/X2/H1/H2 Powercube X1/X2/H1/H2-V2 1/8 Powercube-M1C Force H1/H2 Compatibility List of Pylontech ESS and Inverters Ver.2.35.xlsx High Voltage ESS Last Update: 2025/1/21 Key Features Activation Inverter Inverter Type Battery COMM. Application Force Firmware Ver Installation Brand Charge ASW06H/08H/10H/12H/15H-T1(1) DSP:1.04.00(1) AISWEI(Solplan ASW05kH/06kH/08kH/10kH/12kH- Powercube ARM:V610-60005- CAN On/off-grid Yes Yes Wall mounting et) T2(2) X1/X2/H1/H2 02(1) ASW08kH/10kH/12kH-T3(2) Powercube V610-05001-00(2) X1/X2/H1/H2-V2 MHT-4~20K Series Powercube-M1C MHT-25~50K Series Force H1/H2 MHS-3~8K Series Force H1/H2-V2 SOLINTEG CAN On/off-grid Yes Yes ARM: V01(08) Wall mounting MRT-4~20K Series Force-H3 MRT-25~50K Series MRS-3~8K Series ETH-3~8KTL-HS Series ETEK ETH-4~20KTL-HT Series CAN On/off-grid Yes Yes ARM:

Source: <https://pylonwebs3.s3.amazonaws.com/upload_us/2025/02/10/Compatibility%20List%20of%20Pylontech%20ESS%20and%20Inverters%20Ver.2.35_20250210103505A665.pdf>

Force-H3 — Solar inverter–battery compatibility


**Inverter brand:** Sermatec

**Battery brand:** Pylontech

**Battery model:** Force-H3

**Communication interface:** CAN

**Supported system types:** On-grid

> Sermatec SMT-10K/30K/50K-TL-TH CAN On-grid Yes Yes

Source: <https://pylonwebs3.s3.amazonaws.com/upload_us/2025/02/10/Compatibility%20List%20of%20Pylontech%20ESS%20and%20Inverters%20Ver.2.35_20250210103505A665.pdf>


**Inverter brand:** Imeon Energy

**Battery brand:** Pylontech

**Battery model:** Force-H3

**Communication interface:** CAN

**Minimum firmware:** V1.10

**Supported system types:** On/off-grid

> Imeon Energy 3/3.7/4.6/5HV CAN On/off-grid Yes Yes V1.10

Source: <https://pylonwebs3.s3.amazonaws.com/upload_us/2025/02/10/Compatibility%20List%20of%20Pylontech%20ESS%20and%20Inverters%20Ver.2.35_20250210103505A665.pdf>


**Inverter brand:** GoodWe

**Battery brand:** Pylontech

**Battery model:** Force-H3

**Communication interface:** CAN

**Minimum firmware:** ARM firmware versions 14 and above

**Supported system types:** On-grid

**Restrictions or notes:** Please note that the nominal voltage of Force H3 Series must be within the Battery Voltage Range of GoodWe inverters. Maximum 4 units for EH/BH.

> Force-H3 ● ● ● ● **.Including EH Series :EH PLUS EH/BH/BT: *1. ARM firmware versions 07 and above are required for compatibility. Please note that the nominal voltage of POWERCUBE-H1-48 Series must be within the Battery Voltage Range of GoodWe inverters. Maximum 8 units for EH/BH. *2. ARM firmware versions 14 and above are required for compatibility. *3. ARM firmware versions 14 and above are required for compatibility. Please note that the nominal voltage of Force H3 Series must be within the Battery Voltage Range of GoodWe inverters. Maximum 4 units for EH/BH. ET G2:

Source: <https://en.goodwe.com/Ftp/EN/Downloads/User%20Manual/GW_Battery%20Compatibility%20Overview-EN.pdf>


**Inverter brand:** Sol-Ark

**Battery brand:** Pylontech

**Battery model:** Force-H3

**Communication interface:** CAN

**Minimum firmware:** 1066

**Supported system types:** On/off-grid

> Pylontech ESS and Inverters Ver.2.35.xlsx High Voltage ESS Last Update: 2025/1/21 Key Features Activation Inverter Inverter Type Battery COMM. Application Force Firmware Ver Installation Brand Charge ABH1002AA ISS 1Play 3TL / 6TL CAN On/off-grid Yes Yes Wall mounting Ingeteam Power ABH1003_Q(disp) Technology ABH1007_A ISS 1Play 3TL M / 6TL M CAN On/off-grid Yes Yes Wall mounting ABH1003_Q(disp) RHI-3P-HVES-5G series S6-EH3P(5-10)K-H-EU Solis CAN On/off-grid Yes Yes Wall mounting S6-EH1P(3.8-11.4)K-H-US S6-EH3P(12-20)K-H S6-EH3P(29.9-50)K-H b SMA Solar SBS 3.7-10 - SBS6.0-10 CAN On/off-grid Yes Yes 04.04.03.R Wall mounting Technology AG PLENTICORE plus c PLENTICORE plus G2 KOSTAL Industrie PLENTICORE BI xx/26 RS485 On/off-grid Yes Yes Wall mounting Elektrik GmbH PLENTICORE BI xx/26 G2 PLENTICORE G3 KACO NH3 Series Powercube CAN On/off-grid Yes Yes Wall mounting X1/X2/H1/H2 SAPPHIRE- Sungrow SH5.0/6.0/8.0/10.0RT Powercube CAN On/off-grid Yes Yes Wall mounting H_V11_V01_A X1/X2/H1/H2-V2 Delios s.r.l. DLX HV series Powercube-M1C CAN On/off-grid Yes Yes V3.00 Wall mounting EH/BH series Force H1/H2 Goodwe ET/BT 5-10kW Force H1/H2-V2 CAN On/off-grid Yes Yes V14 Wall mounting GW40K/50K-ET Force-H3 EATON xStorage Home 3P Series CAN On/off-grid Yes Yes V3.00 Wall mounting SolarMax ES-T Series CAN On/off-grid Yes Yes V3.00 Wall mounting SUN-5~25K-SG01HP3-EU/AU Deye(Sunsynk) a CAN On/off-grid Yes Yes 2001-X018 Wall mounting SUN-29.9~50K-SG01HP3-EU/AU 30K-3P-208V-N Sol-Ark CAN On/off-grid Yes Yes 1066

Source: <https://pylonwebs3.s3.amazonaws.com/upload_us/2025/02/10/Compatibility%20List%20of%20Pylontech%20ESS%20and%20Inverters%20Ver.2.35_20250210103505A665.pdf>


**Inverter brand:** SMA Solar Technology AG

**Battery brand:** Pylontech

**Battery model:** Force-L1/L2

**Nominal voltage:** 48V

**Communication interface:** CAN

**Supported system types:** On/off-grid

**Restrictions or notes:** When compatible with SMA SI4.4-M / SI6.0-H / SI8.0-H, it`s required to follow the min. configuration table from SMA for a guaranteed configuration. The Force L1/L2 is not compatible with SMA SI series.

> CAN On/off-grid PV only Yes 90009 Solis US2000 US2000V2 US3000 US2000C US3000C US5000 US5000-B UP5000 UF5000 Phantom-S Force-L1/L2 Pelio-L Please note that compatibility testing with various inverter brands is currently underway. The list will be updated regularly. For any inquiries, please contact: service@pylontech.com.cn 4/8 Compatibility List of Pylontech ESS and Inverters Ver.2.35.xlsx 48V ESS Last Update:

Source: <https://pylonwebs3.s3.amazonaws.com/upload_us/2025/02/10/Compatibility%20List%20of%20Pylontech%20ESS%20and%20Inverters%20Ver.2.35_20250210103505A665.pdf>

Force-L1/L2 — Solar inverter–battery compatibility


**Inverter brand:** Victron

**Battery brand:** Pylontech

**Battery model:** Force-L1 & L2

**Nominal voltage:** 48V

**Communication interface:** CAN-bus

**Minimum firmware:** Venus OS v3.50

**Supported system types:** ESS, Grid Backup, Off-grid

**Module capacity:** 3.55 kWh

> CAN-bus Wiring 4. GX Device Settings 5. VEConfigure Settings 6. VE.Direct MPPT Settings 7. Example Wiring Diagram 8. Troubleshooting 9. FAQ and Known Issues The maximum charge and discharge current is limited to 25A, but the data sheet tells me the maximum is 100A. After charging the battery the charge current often changes between 0A and 25A. My system isn't charging at the rated capacity, or my PV is shutting down My system only charges the battery to 52.4V The battery won't charge to 100% 'Internal Error' shown on battery status 'High cell voltage' warning or alarm shown on battery status 10. Further Information DISQUS Victron & Pylontech UP2500, US2000(C/D), US3000, US3000C, US5000, US5000B, UF5000, Pelio-L, UP5000, Phantom-S, Force-L1 & L2 The combination of Victron products with Pylontech lithium batteries has been tested and certified by the Victron and Pylontech R&D departments. General information about the battery is found in Pylontech's documentation. This manual is intended to be used in conjunction with the product manual supplied by Pylontech. It provides additional and specific information regarding integration with Victron systems. The Pylontech includes a Battery Management System (BMS) with each battery module. This interfaces with the Victron <https://www.victronenergy.com/live/venus-os:start> GX device and can support multiple battery modules connected in parallel. 1. Product & system compatibility <https://www.victronenergy.com/live/_media/battery_compatibility:pylontech_battery.png> Battery | UP2500* | US2000 (Plus/C/D) | US3000(C) | UP5000 & US5000(B) | Pelio-L | Force-L1 & L2 | UF5000 | Nominal voltage | 24V | 48V | 48V | 48V | 51.2V | 48V | 51.2V | Module capacity | 2.55 kWh | 2.4 kWh | 3.5 kWh | 4.8 kwh | 5.12kWh | 3.55 kWh |

Source: <https://www.victronenergy.com/live/battery_compatibility:pylontech_phantom>

Force-L1 & L2 — Solar inverter–battery compatibility


**Inverter brand:** GoodWe

**Battery brand:** Pylontech

**Battery model:** Force-L1

**Nominal voltage:** 48V

**Communication interface:** CAN

**Minimum firmware:** ARM firmware versions 07 and above

**Supported system types:** On-grid

> Force-L1 ● ● ● ● ● Force L2 Series*2 Force-L2 ● ● ● ● ● US5000 Series*3 US5000 ● ● ES/EM/SBP/BP: *1. ARM firmware versions 00 and above are required for compatibility. *2. ARM firmware versions 07 and above are required for compatibility. *3. ARM firmware versions 00 and above are required for compatibility. sales@goodwe.com

Source: <https://en.goodwe.com/Ftp/EN/Downloads/User%20Manual/GW_Battery%20Compatibility%20Overview-EN.pdf>

Force-L1 — Solar inverter–battery compatibility

battery_brand, communication_interface, nominal_voltage, system_types


**Inverter brand:** Victron

**Battery brand:** Freedom Won

**Battery model:** Freedom Won LiTE and eTower

**Nominal voltage:** 48V

**Communication interface:** CAN-bus

**Supported system types:** ESS, Grid Backup, Off-grid

**Restrictions or notes:** Freedom Won battery warranties require that you have configured the battery correctly.

> Important: It is very important to read this documentation in full and carefully. Freedom Won battery warranties require that you have configured the battery correctly.

Source: <https://www.victronenergy.com/live/battery_compatibility:freedomwon>

Freedom Won LiTE and eTower — Solar inverter–battery compatibility

battery_model, communication_interface, inverter_brand, nominal_voltage, system_types


**Inverter brand:** Victron

**Battery brand:** Hubble Lithium

**Battery model:** Hubble Lithium

**Communication interface:** CAN-bus via CloudLink

**Restrictions or notes:** Requires CloudLink

> Requires CloudLink

Source: <https://www.victronenergy.com/live/battery_compatibility:hubble>

Hubble Lithium — Solar inverter–battery compatibility

battery_brand, battery_model, communication_interface, inverter_brand


**Inverter brand:** GoodWe

**Battery brand:** BYD

**Battery model:** HVB 14.8

**Communication interface:** CAN

**Supported system types:** On-grid

**Restrictions or notes:** For HVB multi-tower system parallel connections, the BYD 70A combiner box is required.

> GoodWe Battery Compatibility Overview-20260715-EN-V029.1 Information may be subject to change without notice. HVM+ 11.0 ● ● HVM+ 13.8 ● ● Battery-Box HVM+*4 HVM+ 16.6 ● ● HVM+ 19.3 ● ● HVM+ 22.1 ● ● BYD HVB 11.8 ● HVB 14.8 ● ● HVB 17.8 ● ● Battery-Box HVB*5 HVB 20.7 ● ● HVB 23.7 ● ● HVB 25.7 ● ● HVB 29.6 ● ● HVS+ 5.1 ● ● HVS+ 7.7 ● ● Battery-Box HVS+*6 ● ● HVS+ 10.2 HVS+ 12.8 ● ● LITE 30 ● LITE 37.5 ● LITE 45 ● BATTERYMAX LITE*3 ● LITE 52.5 LITE 60 ● LITE 67.5 ● *. Including ET Series: ET PLUS+, ET PLUS+ (16A) **.Including EH Series :EH PLUS ET/EH/BT/BH/EHB: *1. ARM firmware versions 07 and above are required for compatibility. *2. ARM firmware versions 11 and above are required for compatibility. ET15-30kW: *2. ARM firmware versions 02 and above are required for compatibility. BYD CAN communication line PIN1/2 corresponds to inverter CAN communication line PIN4/5.

Source: <https://en.goodwe.com/Ftp/EN/Downloads/User%20Manual/GW_Battery%20Compatibility%20Overview-EN.pdf>

HVB 14.8 — Solar inverter–battery compatibility


**Inverter brand:** GoodWe

**Battery brand:** BYD

**Battery model:** HVL 12.0

**Communication interface:** CAN

**Minimum firmware:** ARM firmware versions 11 and above

**Supported system types:** On-grid

**Restrictions or notes:** For U.S only

> sales@goodwe.com www.goodwe.com Battery Compatibility Overview 4) High-voltage Energy Storage Systems (for U.S only). Inverter Series Battery Brand Battery Series Battery Model A-ES A-BP ES-US20 SBP-US20 SECU-S13 ● ● SECU-S15 ● ● SECU-S*1 SECU-S18 ● ● SECU-S20 ● ● GoodWe LX F9.6-30 ● ● ● ● *2 LX F12.8-30 ● ● ● ● Lynx Home FH series US LX F16.0-30 ● ● ● ● LX F19.2-30 ● ● ● ● GoodWe Battery Compatibility Overview-20260715-EN-V029.1 Information may be subject to change without notice. A-ES/A-BP: *1. ARM firmware versions 14 and above are required for compatibility. ES-US20/SBP-US20: *2. ARM firmware versions 03 and above are required for compatibility. A-ES/A-BP: *2. ARM firmware versions 24 and above and DSP versions 07 and above are required for compatibility. Battery Brand Battery Series Battery Model A-ES A-BP ES-US20 SBP-US20 HVL 12.0 ● ● HVL 16.0 ● ● HVL 20.0 ● ● BYD Battery-Box Premium HVL*1 HVL 24.0 ● ● HVL 28.0 ● ● HVL 32.0 ● ● A-ES/A-BP: *1. ARM firmware versions 11 and above are required for compatibility.

Source: <https://en.goodwe.com/Ftp/EN/Downloads/User%20Manual/GW_Battery%20Compatibility%20Overview-EN.pdf>

HVL 12.0 — Solar inverter–battery compatibility


**Inverter brand:** GoodWe

**Battery brand:** BYD

**Battery model:** HVM+ 11.0

**Communication interface:** CAN

**Supported system types:** On-grid

> GoodWe Battery Compatibility Overview-20260715-EN-V029.1 Information may be subject to change without notice. HVM+ 11.0 ● ● HVM+ 13.8 ● ● Battery-Box HVM+*4 HVM+ 16.6 ● ● HVM+ 19.3 ● ● HVM+ 22.1 ● ● BYD HVB 11.8 ● HVB 14.8 ● ● HVB 17.8 ● ● Battery-Box HVB*5 HVB 20.7 ● ● HVB 23.7 ● ● HVB 25.7 ● ● HVB 29.6 ● ● HVS+ 5.1 ● ● HVS+ 7.7 ● ● Battery-Box HVS+*6 ● ● HVS+ 10.2 HVS+ 12.8 ● ● LITE 30 ● LITE 37.5 ● LITE 45 ● BATTERYMAX LITE*3 ● LITE 52.5 LITE 60 ● LITE 67.5 ● *. Including ET Series: ET PLUS+, ET PLUS+ (16A) **.Including EH Series :EH PLUS ET/EH/BT/BH/EHB: *1. ARM firmware versions 07 and above are required for compatibility. *2. ARM firmware versions 11 and above are required for compatibility. ET15-30kW: *2. ARM firmware versions 02 and above are required for compatibility. BYD CAN communication line PIN1/2 corresponds to inverter CAN communication line PIN4/5.

Source: <https://en.goodwe.com/Ftp/EN/Downloads/User%20Manual/GW_Battery%20Compatibility%20Overview-EN.pdf>

HVM+ 11.0 — Solar inverter–battery compatibility


**Inverter brand:** GoodWe

**Battery brand:** BYD

**Battery model:** HVM 11.0

**Communication interface:** CAN

**Minimum firmware:** ARM firmware versions 11 and above

**Supported system types:** On-grid

> sales@goodwe.com www.goodwe.com Battery Compatibility Overview 2) High-voltage Energy Storage Systems Battery Battery Battery Inverter Series Brand Series Model ET (5-10kW)* EH** BT BH EHB ET (15-30kW) ET G2 ET (40-50kW) Battery-Box HV Series*1 - ● ● ● ● HVM 8.3 ● ● ● HVM 11.0 ● ● ● ● ● ● ● Battery-Box Premium HVM 13.8 ● ● ● ● ● ● ● HVM*2 HVM 16.6 ● ● ● ● ● ● ● HVM 19.3 ● ● ● ● ● ● ● HVM 22.1 ● ● ● ● ● ● ● HVS 5.1 ● ● ● ● ● ● ● Battery-Box Premium HVS 7.7 ● ● ● ● ● ● ● HVS*2 HVS 10.2 ● ● ● ● ● ● ● HVS 12.8 ● ● ● ● GoodWe Battery Compatibility Overview-20260715-EN-V029.1 Information may be subject to change without notice. HVM+ 11.0 ● ● HVM+ 13.8 ● ● Battery-Box HVM+*4 HVM+ 16.6 ● ● HVM+ 19.3 ● ● HVM+ 22.1 ● ● BYD HVB 11.8 ● HVB 14.8 ● ● HVB 17.8 ● ● Battery-Box HVB*5 HVB 20.7 ● ● HVB 23.7 ● ● HVB 25.7 ● ● HVB 29.6 ● ● HVS+ 5.1 ● ● HVS+ 7.7 ● ● Battery-Box HVS+*6 ● ● HVS+ 10.2 HVS+ 12.8 ● ● LITE 30 ● LITE 37.5 ● LITE 45 ● BATTERYMAX LITE*3 ● LITE 52.5 LITE 60 ● LITE 67.5 ● *. Including ET Series: ET PLUS+, ET PLUS+ (16A) **.Including EH Series :EH PLUS ET/EH/BT/BH/EHB: *1. ARM firmware versions 07 and above are required for compatibility. *2. ARM firmware versions 11 and above are required for compatibility. ET15-30kW: *2. ARM firmware versions 02 and above are required for compatibility. BYD CAN communication line PIN1/2 corresponds to inverter CAN communication line PIN4/5.

Source: <https://en.goodwe.com/Ftp/EN/Downloads/User%20Manual/GW_Battery%20Compatibility%20Overview-EN.pdf>

HVM 11.0 — Solar inverter–battery compatibility


**Inverter brand:** GoodWe

**Battery brand:** BYD

**Battery model:** HVS+ 5.1

**Communication interface:** CAN

**Supported system types:** On-grid

**Restrictions or notes:** For HVS+ multi-tower system parallel connections, the BYD 70A combiner box is required.

> GoodWe Battery Compatibility Overview-20260715-EN-V029.1 Information may be subject to change without notice. HVM+ 11.0 ● ● HVM+ 13.8 ● ● Battery-Box HVM+*4 HVM+ 16.6 ● ● HVM+ 19.3 ● ● HVM+ 22.1 ● ● BYD HVB 11.8 ● HVB 14.8 ● ● HVB 17.8 ● ● Battery-Box HVB*5 HVB 20.7 ● ● HVB 23.7 ● ● HVB 25.7 ● ● HVB 29.6 ● ● HVS+ 5.1 ● ● HVS+ 7.7 ● ● Battery-Box HVS+*6 ● ● HVS+ 10.2 HVS+ 12.8 ● ● LITE 30 ● LITE 37.5 ● LITE 45 ● BATTERYMAX LITE*3 ● LITE 52.5 LITE 60 ● LITE 67.5 ● *. Including ET Series: ET PLUS+, ET PLUS+ (16A) **.Including EH Series :EH PLUS ET/EH/BT/BH/EHB: *1. ARM firmware versions 07 and above are required for compatibility. *2. ARM firmware versions 11 and above are required for compatibility. ET15-30kW: *2. ARM firmware versions 02 and above are required for compatibility. BYD CAN communication line PIN1/2 corresponds to inverter CAN communication line PIN4/5.

Source: <https://en.goodwe.com/Ftp/EN/Downloads/User%20Manual/GW_Battery%20Compatibility%20Overview-EN.pdf>

HVS+ 5.1 — Solar inverter–battery compatibility


**Inverter brand:** GoodWe

**Battery brand:** BYD

**Battery model:** HVS 5.1

**Communication interface:** CAN

**Minimum firmware:** ARM firmware versions 11 and above

**Supported system types:** On-grid

> HVS 5.1 ● ● ● ● ● ● ● Battery-Box Premium HVS 7.7 ● ● ● ● ● ● ● HVS*2 HVS 10.2 ● ● ● ● ● ● ● HVS 12.8 ● ● ● ● GoodWe Battery Compatibility Overview-20260715-EN-V029.1 Information may be subject to change without notice. HVM+ 11.0 ● ● HVM+ 13.8 ● ● Battery-Box HVM+*4 HVM+ 16.6 ● ● HVM+ 19.3 ● ● HVM+ 22.1 ● ● BYD HVB 11.8 ● HVB 14.8 ● ● HVB 17.8 ● ● Battery-Box HVB*5 HVB 20.7 ● ● HVB 23.7 ● ● HVB 25.7 ● ● HVB 29.6 ● ● HVS+ 5.1 ● ● HVS+ 7.7 ● ● Battery-Box HVS+*6 ● ● HVS+ 10.2 HVS+ 12.8 ● ● LITE 30 ● LITE 37.5 ● LITE 45 ● BATTERYMAX LITE*3 ● LITE 52.5 LITE 60 ● LITE 67.5 ● *. Including ET Series: ET PLUS+, ET PLUS+ (16A) **.Including EH Series :EH PLUS ET/EH/BT/BH/EHB: *1. ARM firmware versions 07 and above are required for compatibility. *2. ARM firmware versions 11 and above are required for compatibility. ET15-30kW: *2. ARM firmware versions 02 and above are required for compatibility. BYD CAN communication line PIN1/2 corresponds to inverter CAN communication line PIN4/5.

Source: <https://en.goodwe.com/Ftp/EN/Downloads/User%20Manual/GW_Battery%20Compatibility%20Overview-EN.pdf>

HVS 5.1 — Solar inverter–battery compatibility


**Inverter brand:** GoodWe

**Battery brand:** UZENERGY

**Battery model:** L051100-A

**Nominal voltage:** 48V

**Communication interface:** CAN

**Minimum firmware:** ARM firmware versions 12 and above

**Supported system types:** On-grid

> UZENERGY L051100-A Series L051100-A

Source: <https://en.goodwe.com/Ftp/EN/Downloads/User%20Manual/GW_Battery%20Compatibility%20Overview-EN.pdf>

L051100-A — Solar inverter–battery compatibility

communication_interface, inverter_brand, minimum_firmware, nominal_voltage, system_types


**Inverter brand:** GoodWe

**Battery brand:** OLOID

**Battery model:** LBS051100A-A02

**Nominal voltage:** 48V

**Communication interface:** CAN

**Minimum firmware:** ARM firmware versions 12 and above

**Supported system types:** On-grid

> Battery Brand Battery Series Battery Model ES EM SBP ES G2 SBP G2 ES Uniq LBS051100A-A02 ● LBS051100A Series*1 LBS051100A-A03 ● OLOID LBS051200A-A02 ● LBS051200A Series*1 LBS051200A-A03 ● ES: *1. ARM firmware versions 12 and above are required for compatibility. Battery Brand Battery Series Battery Model ES EM SBP ES G2 SBP G2 ES Uniq Soluna 4K Pack ● ● ● Soluna LV (48V) Battery Series Soluna 5K Pack ● ● ● Soluna EOS 5K Pack ● ● ● Battery Brand Battery Series Battery Model ES EM SBP ES G2 SBP G2 ES Uniq Smile5-BAT Series SMILE5-BAT*2 ● ● ● Smile-BAT-10.1P*2 ● ● ● Smile-BAT Series Smile-BAT-10.3P*2 ● ● ● ALPHA*1 Smile-BAT-13.3P*3 ● ● ● M48112-P Series M48112-P*3 ● ● ● M48100-P Series M48100-P*3 ● ● ● ES/EM/SBP/BP: *1. CAN communication line sequence of ALPHA-ESS battery does not match GoodWe inverters.

Source: <https://en.goodwe.com/Ftp/EN/Downloads/User%20Manual/GW_Battery%20Compatibility%20Overview-EN.pdf>

LBS051100A-A02 — Solar inverter–battery compatibility


**Inverter brand:** GoodWe

**Battery brand:** OLOID

**Battery model:** LBS102100A

**Communication interface:** CAN

**Minimum firmware:** ARM firmware versions 14 and above

**Supported system types:** On-grid

> GoodWe Battery Compatibility Overview-20260715-EN-V029.1 Information may be subject to change without notice. A-ES/A-BP: *1. ARM firmware versions 14 and above are required for compatibility. ES-US20/SBP-US20: *2. ARM firmware versions 03 and above are required for compatibility. A-ES/A-BP: *2. ARM firmware versions 24 and above and DSP versions 07 and above are required for compatibility. Battery Brand Battery Series Battery Model A-ES A-BP ES-US20 SBP-US20 HVL 12.0 ● ● HVL 16.0 ● ● HVL 20.0 ● ● BYD Battery-Box Premium HVL*1 HVL 24.0 ● ● HVL 28.0 ● ● HVL 32.0 ● ● A-ES/A-BP: *1. ARM firmware versions 11 and above are required for compatibility. Battery Brand Battery Series Battery Model A-ES A-BP ES-US20 SBP-US20 LBS102100A Series*1 LBS102100A ● ● OLOID LBS153100A Series*1 LBS153100A ● ● LBS205100A Series*1 LBS205100A ● ● A-ES/A-BP: *1. ARM firmware versions 14 and above are required for compatibility.

Source: <https://en.goodwe.com/Ftp/EN/Downloads/User%20Manual/GW_Battery%20Compatibility%20Overview-EN.pdf>

LBS102100A — Solar inverter–battery compatibility


**Inverter brand:** Victron

**Battery brand:** Leoch

**Battery model:** Leoch LiFePO4

**Nominal voltage:** 48V

**Communication interface:** BMS-Can (500 kbit/s)

> Use a Victron Type B VE.CAN to BMS-Can cable to connect the GX device to the battery.

Source: <https://www.victronenergy.com/live/battery_compatibility:leoch>

Leoch LiFePO4 — Solar inverter–battery compatibility

battery_brand, battery_model, communication_interface, nominal_voltage


**Inverter brand:** GoodWe

**Battery brand:** BYD

**Battery model:** LITE 30

**Communication interface:** CAN

**Supported system types:** On-grid

> GoodWe Battery Compatibility Overview-20260715-EN-V029.1 Information may be subject to change without notice. HVM+ 11.0 ● ● HVM+ 13.8 ● ● Battery-Box HVM+*4 HVM+ 16.6 ● ● HVM+ 19.3 ● ● HVM+ 22.1 ● ● BYD HVB 11.8 ● HVB 14.8 ● ● HVB 17.8 ● ● Battery-Box HVB*5 HVB 20.7 ● ● HVB 23.7 ● ● HVB 25.7 ● ● HVB 29.6 ● ● HVS+ 5.1 ● ● HVS+ 7.7 ● ● Battery-Box HVS+*6 ● ● HVS+ 10.2 HVS+ 12.8 ● ● LITE 30 ● LITE 37.5 ● LITE 45 ● BATTERYMAX LITE*3 ● LITE 52.5 LITE 60 ● LITE 67.5 ● *. Including ET Series: ET PLUS+, ET PLUS+ (16A) **.Including EH Series :EH PLUS ET/EH/BT/BH/EHB: *1. ARM firmware versions 07 and above are required for compatibility. *2. ARM firmware versions 11 and above are required for compatibility. ET15-30kW: *2. ARM firmware versions 02 and above are required for compatibility. BYD CAN communication line PIN1/2 corresponds to inverter CAN communication line PIN4/5.

Source: <https://en.goodwe.com/Ftp/EN/Downloads/User%20Manual/GW_Battery%20Compatibility%20Overview-EN.pdf>

LITE 30 — Solar inverter–battery compatibility


**Inverter brand:** Victron

**Battery brand:** BYD

**Battery model:** LV Flex 5

**Nominal voltage:** 48V

**Communication interface:** CAN-bus

**Minimum firmware:** Venus OS v2.52

**Supported system types:** ESS, Grid Backup, Off-grid

**Module capacity:** 5.0 kWh

> CAN-Bus wiring between the battery and GX Device 4. VEConfigure settings 5. GX device configuration 6. Solar Charging 6.1 Victron MPPT charger settings 6.2 Self-Startup from Low voltage shutdown modes 7. Example Wiring Diagram 8. Troubleshooting 9. Step by Step Installation Guide Introduction to the new BYD Premium range LVL and LVS Introduction to the new BYD Flex 5.0 User contributed installation guide 10. Known Issues with B-Box Pro models 11. Legacy systems using allow-to-charge and allow-to-discharge contacts 12. High cell voltage warning or alarm shown on battery status 13. Further Information Victron & BYD Battery | Pro 2.5-10.0 | Pro 12.8 & 13.8 | L 3.5-14.0 | Premium LVL 15.4 | Premium LVS 4.0 | LV Flex 5 | LV5.0+ | Appearance | | | | | | <https://www.victronenergy.com/live/_detail/battery_compatibility:byd_flex.jpg?id=battery_compatibility%3Abyd_b-box> | <https://www.victronenergy.com/live/_detail/battery_compatibility:byd5.0_.png?id=battery_compatibility%3Abyd_b-box> | ESS | yes | yes | yes | yes | yes | yes | yes | Grid Backup | yes | yes | yes | yes | yes | yes | yes | Off-Grid | yes | yes | no | yes | yes | yes | yes | Module capacity | 2.5 kWh | 13.8 kWh | 3.5 kWh | 15.36 kWh | 4.0 kWh | 5.0 kWh |

Source: <https://www.victronenergy.com/live/battery_compatibility:byd_b-box>

LV Flex 5 — Solar inverter–battery compatibility


**Inverter brand:** Victron

**Battery brand:** BYD

**Battery model:** LV5.0+

**Nominal voltage:** 48V

**Communication interface:** CAN-bus

**Minimum firmware:** Venus OS v2.52

**Supported system types:** ESS, Grid Backup, Off-grid

**Module capacity:** 5.12 kWh

> CAN-Bus wiring between the battery and GX Device 4. VEConfigure settings 5. GX device configuration 6. Solar Charging 6.1 Victron MPPT charger settings 6.2 Self-Startup from Low voltage shutdown modes 7. Example Wiring Diagram 8. Troubleshooting 9. Step by Step Installation Guide Introduction to the new BYD Premium range LVL and LVS Introduction to the new BYD Flex 5.0 User contributed installation guide 10. Known Issues with B-Box Pro models 11. Legacy systems using allow-to-charge and allow-to-discharge contacts 12. High cell voltage warning or alarm shown on battery status 13. Further Information Victron & BYD Battery | Pro 2.5-10.0 | Pro 12.8 & 13.8 | L 3.5-14.0 | Premium LVL 15.4 | Premium LVS 4.0 | LV Flex 5 | LV5.0+ | Appearance | | | | | | <https://www.victronenergy.com/live/_detail/battery_compatibility:byd_flex.jpg?id=battery_compatibility%3Abyd_b-box> | <https://www.victronenergy.com/live/_detail/battery_compatibility:byd5.0_.png?id=battery_compatibility%3Abyd_b-box> | ESS | yes | yes | yes | yes | yes | yes | yes | Grid Backup | yes | yes | yes | yes | yes | yes | yes | Off-Grid | yes | yes | no | yes | yes | yes | yes | Module capacity | 2.5 kWh | 13.8 kWh | 3.5 kWh | 15.36 kWh | 4.0 kWh | 5.0 kWh | 5.12 kWh |

Source: <https://www.victronenergy.com/live/battery_compatibility:byd_b-box>

LV5.0+ — Solar inverter–battery compatibility


**Inverter brand:** GoodWe

**Battery brand:** BYD

**Battery model:** LVL 15.4

**Nominal voltage:** 48V

**Communication interface:** CAN

**Minimum firmware:** ARM firmware versions 07 and above

**Supported system types:** On-grid

> BYD Battery-Box Premium LVL*2 LVL 15.4

Source: <https://en.goodwe.com/Ftp/EN/Downloads/User%20Manual/GW_Battery%20Compatibility%20Overview-EN.pdf>

LVL 15.4 — Solar inverter–battery compatibility


**Inverter brand:** GoodWe

**Battery brand:** GoodWe

**Battery model:** LX A5.0-10

**Communication interface:** CAN

**Supported system types:** On-grid

> In addition to the batteries listed in this document, there are some batteries that follow the GOODWE CAN communication protocol that are not listed in this document, if you need to get the matching information for these batteries, please consult GOODWE's technical service personnel. 1) Low-voltage Energy Storage Systems Battery Battery Battery Inverter Series Brand Series Model ES EM SBP ES G2 SBP G2 ES uniq (8-12K) ES Uniq (3-6K) EO ET LV ES LD EO G2 SECU-A SECU-A5.4L ● ● ● ● ● GoodWe Battery Compatibility Overview-20260715-EN-V029.1 Information may be subject to change without notice. LX U5.4-L*1 ● ● ● ● ● ● Lynx Home U LX U5.4-20 *2 ● ● ● ● ● ● LX U5.0-30*4 ● ● ● ● ● ● ● ● ● ● GOODWE ● ● ● ● ● ● LX A5.0-10 *3 LX A5.0-30 *5 ● ● ● ● ● ● ● ● Lynx Home A ● ● ● ● ● GW14.3-BAT-LV-G10*6 GW16.1-BAT-LV-G10*7 ● ● ● ● ● Note:

Source: <https://en.goodwe.com/Ftp/EN/Downloads/User%20Manual/GW_Battery%20Compatibility%20Overview-EN.pdf>

LX A5.0-10 — Solar inverter–battery compatibility


**Inverter brand:** GoodWe

**Battery brand:** GoodWe

**Battery model:** LX A5.0-30

**Communication interface:** CAN

**Supported system types:** On-grid

> In addition to the batteries listed in this document, there are some batteries that follow the GOODWE CAN communication protocol that are not listed in this document, if you need to get the matching information for these batteries, please consult GOODWE's technical service personnel. 1) Low-voltage Energy Storage Systems Battery Battery Battery Inverter Series Brand Series Model ES EM SBP ES G2 SBP G2 ES uniq (8-12K) ES Uniq (3-6K) EO ET LV ES LD EO G2 SECU-A SECU-A5.4L ● ● ● ● ● GoodWe Battery Compatibility Overview-20260715-EN-V029.1 Information may be subject to change without notice. LX U5.4-L*1 ● ● ● ● ● ● Lynx Home U LX U5.4-20 *2 ● ● ● ● ● ● LX U5.0-30*4 ● ● ● ● ● ● ● ● ● ● GOODWE ● ● ● ● ● ● LX A5.0-10 *3 LX A5.0-30 *5 ● ● ● ● ● ● ● ● Lynx Home A ● ● ● ● ● GW14.3-BAT-LV-G10*6 GW16.1-BAT-LV-G10*7 ● ● ● ● ● Note:

Source: <https://en.goodwe.com/Ftp/EN/Downloads/User%20Manual/GW_Battery%20Compatibility%20Overview-EN.pdf>

LX A5.0-30 — Solar inverter–battery compatibility


**Inverter brand:** GoodWe

**Battery brand:** GoodWe

**Battery model:** LX C101-10

**Communication interface:** CAN

**Supported system types:** On-grid

> Lynx C*4 LX C101-10

Source: <https://en.goodwe.com/Ftp/EN/Downloads/User%20Manual/GW_Battery%20Compatibility%20Overview-EN.pdf>

LX C101-10 — Solar inverter–battery compatibility

battery_brand, communication_interface, inverter_brand, system_types


**Inverter brand:** GoodWe

**Battery brand:** GoodWe

**Battery model:** LX F13.1-H

**Communication interface:** CAN

**Minimum firmware:** ARM firmware versions 19 and above

**Supported system types:** On-grid

> CAN communication line sequence of ALPHA-ESS battery does not match GoodWe inverters. A matching solution provided by ALPHA-ESS is required. *2. ARM firmware versions 10 and above are required for compatibility. *3. ARM firmware versions 11 and above are required for compatibility. Battery Brand Battery Series Battery Model ES EM SBP ES G2 SBP G2 ES Uniq Firefly-3.6K ● ● ● Firefly-7.2K ● ● ● Firefly-10.8K ● ● ● Tecloman Firefly Series*1 Firefly-14.4K ● ● ● Firefly-18.0K ● ● ● Firefly-21.6K ● ● ● Firefly-25.2K ● ● ● ES/EM/SBP: *1. ARM firmware versions 12 and above are required for compatibility. Battery Brand Battery Series Battery Model ES EM SBP ES G2 SBP G2 ES Uniq UZENERGY L051100-A Series L051100-A*1 ● ● ● ES/EM/SBP: *1. ARM firmware versions 12 and above are required for compatibility. sales@goodwe.com www.goodwe.com Battery Compatibility Overview 2) High-voltage Energy Storage Systems Battery Battery Battery Inverter Series Brand Series Model ET (5-10kW)* EH** BT BH EHB ET (15-30kW) ET G2 ET (40-50kW) ET (75-100K) LX F6.6-H ● ● ● ● ● ● ● Lynx Home F*1 LX F9.8-H ● ● ● ● ● ● ● Lynx Home F PLUS+*2 LX F13.1-H ● ● ● ● ● ● ● LX F16.4-H ● ● ● ● LX F6.4-H-20*7 ● ● ● LX F9.6-H-20 ● ● ● ● ● ● ● LX F12.8-H-20 ● ● ● ● ● ● ● GoodWe Battery Compatibility Overview-20260715-EN-V029.1 Information may be subject to change without notice. LX F16.0-H-20 ● ● ● ● ● ● ● Lynx Home F G2*3 LX F19.2-H-20 ● ● ● ● ● ● ● LX F22.4-H-20*8 ● ● ● ● ● ● ● LX F25.6-H-20 ● ● ● ● LX F28.8-H-20 ● ● GW60KWH-D-10 ● GW100KWH-D-10 ● GW100KWH-D-10 ● (Extension) Lynx C*4 LX C101-10 ● GOODWE LX C120-10 ● LX C138-10 ● LX C156-10 ● Lynx Home D*5 LXD5.0-10 ● ● ● ● ● ● GW25.6-BAT-I-G10 ● ● GW30.7-BAT-I-G10 ● ● GW35.8-BAT-I-G10 ● ● GW40.9-BAT-I-G10 ● ● ● GW46.0-BAT-I-G10 ● ● ● BAT*6 GW51.2-BAT-I-G10 ● ● ● GW56.3-BAT-I-G10 ● ● ● GW61.4-BAT-AC-G10 ● ● GW92.1-BAT-AC-G10 ● ● ● GW102.4-BAT-AC-G10 ● ● ● GW112.6-BAT-AC-G10 ● ● ● BAT-C GW208.9-BAT-LC-G10 ● *. Including ET Series: ET PLUS+, ET PLUS+ (16A) **.Including EH Series :EH PLUS ET/EH/BT/BH/EHB: *1. ARM firmware versions 19 and above are required for compatibility.

Source: <https://en.goodwe.com/Ftp/EN/Downloads/User%20Manual/GW_Battery%20Compatibility%20Overview-EN.pdf>

LX F13.1-H — Solar inverter–battery compatibility


**Inverter brand:** GoodWe

**Battery brand:** GoodWe

**Battery model:** LX F6.6-H

**Communication interface:** CAN

**Minimum firmware:** ARM firmware versions 19 and above

**Supported system types:** On-grid

> CAN communication line sequence of ALPHA-ESS battery does not match GoodWe inverters. A matching solution provided by ALPHA-ESS is required. *2. ARM firmware versions 10 and above are required for compatibility. *3. ARM firmware versions 11 and above are required for compatibility. Battery Brand Battery Series Battery Model ES EM SBP ES G2 SBP G2 ES Uniq Firefly-3.6K ● ● ● Firefly-7.2K ● ● ● Firefly-10.8K ● ● ● Tecloman Firefly Series*1 Firefly-14.4K ● ● ● Firefly-18.0K ● ● ● Firefly-21.6K ● ● ● Firefly-25.2K ● ● ● ES/EM/SBP: *1. ARM firmware versions 12 and above are required for compatibility. Battery Brand Battery Series Battery Model ES EM SBP ES G2 SBP G2 ES Uniq UZENERGY L051100-A Series L051100-A*1 ● ● ● ES/EM/SBP: *1. ARM firmware versions 12 and above are required for compatibility. sales@goodwe.com www.goodwe.com Battery Compatibility Overview 2) High-voltage Energy Storage Systems Battery Battery Battery Inverter Series Brand Series Model ET (5-10kW)* EH** BT BH EHB ET (15-30kW) ET G2 ET (40-50kW) ET (75-100K) LX F6.6-H ● ● ● ● ● ● ● Lynx Home F*1 LX F9.8-H ● ● ● ● ● ● ● Lynx Home F PLUS+*2 LX F13.1-H ● ● ● ● ● ● ● LX F16.4-H ● ● ● ● LX F6.4-H-20*7 ● ● ● LX F9.6-H-20 ● ● ● ● ● ● ● LX F12.8-H-20 ● ● ● ● ● ● ● GoodWe Battery Compatibility Overview-20260715-EN-V029.1 Information may be subject to change without notice. LX F16.0-H-20 ● ● ● ● ● ● ● Lynx Home F G2*3 LX F19.2-H-20 ● ● ● ● ● ● ● LX F22.4-H-20*8 ● ● ● ● ● ● ● LX F25.6-H-20 ● ● ● ● LX F28.8-H-20 ● ● GW60KWH-D-10 ● GW100KWH-D-10 ● GW100KWH-D-10 ● (Extension) Lynx C*4 LX C101-10 ● GOODWE LX C120-10 ● LX C138-10 ● LX C156-10 ● Lynx Home D*5 LXD5.0-10 ● ● ● ● ● ● GW25.6-BAT-I-G10 ● ● GW30.7-BAT-I-G10 ● ● GW35.8-BAT-I-G10 ● ● GW40.9-BAT-I-G10 ● ● ● GW46.0-BAT-I-G10 ● ● ● BAT*6 GW51.2-BAT-I-G10 ● ● ● GW56.3-BAT-I-G10 ● ● ● GW61.4-BAT-AC-G10 ● ● GW92.1-BAT-AC-G10 ● ● ● GW102.4-BAT-AC-G10 ● ● ● GW112.6-BAT-AC-G10 ● ● ● BAT-C GW208.9-BAT-LC-G10 ● *. Including ET Series: ET PLUS+, ET PLUS+ (16A) **.Including EH Series :EH PLUS ET/EH/BT/BH/EHB: *1. ARM firmware versions 19 and above are required for compatibility.

Source: <https://en.goodwe.com/Ftp/EN/Downloads/User%20Manual/GW_Battery%20Compatibility%20Overview-EN.pdf>

LX F6.6-H — Solar inverter–battery compatibility


**Inverter brand:** GoodWe

**Battery brand:** GoodWe

**Battery model:** LX F9.6-30

**Communication interface:** CAN

**Minimum firmware:** ARM firmware versions 24 and above and DSP versions 07 and above

**Supported system types:** On-grid

**Restrictions or notes:** For U.S only

> sales@goodwe.com www.goodwe.com Battery Compatibility Overview 4) High-voltage Energy Storage Systems (for U.S only). Inverter Series Battery Brand Battery Series Battery Model A-ES A-BP ES-US20 SBP-US20 SECU-S13 ● ● SECU-S15 ● ● SECU-S*1 SECU-S18 ● ● SECU-S20 ● ● GoodWe LX F9.6-30 ● ● ● ● *2 LX F12.8-30 ● ● ● ● Lynx Home FH series US LX F16.0-30 ● ● ● ● LX F19.2-30 ● ● ● ● GoodWe Battery Compatibility Overview-20260715-EN-V029.1 Information may be subject to change without notice. A-ES/A-BP: *1. ARM firmware versions 14 and above are required for compatibility. ES-US20/SBP-US20: *2. ARM firmware versions 03 and above are required for compatibility. A-ES/A-BP: *2. ARM firmware versions 24 and above and DSP versions 07 and above are required for compatibility.

Source: <https://en.goodwe.com/Ftp/EN/Downloads/User%20Manual/GW_Battery%20Compatibility%20Overview-EN.pdf>

LX F9.6-30 — Solar inverter–battery compatibility


**Inverter brand:** GoodWe

**Battery brand:** GoodWe

**Battery model:** LX F9.8-H

**Communication interface:** CAN

**Minimum firmware:** ARM firmware versions 19 and above

**Supported system types:** On-grid

> Lynx Home F*1 LX F9.8-H

Source: <https://en.goodwe.com/Ftp/EN/Downloads/User%20Manual/GW_Battery%20Compatibility%20Overview-EN.pdf>

LX F9.8-H — Solar inverter–battery compatibility

battery_brand, communication_interface, inverter_brand, minimum_firmware, system_types


**Inverter brand:** GoodWe

**Battery brand:** GoodWe

**Battery model:** LX U5.0-30

**Communication interface:** CAN

**Minimum firmware:** ARM firmware versions 34 and above

**Supported system types:** On-grid

> In addition to the batteries listed in this document, there are some batteries that follow the GOODWE CAN communication protocol that are not listed in this document, if you need to get the matching information for these batteries, please consult GOODWE's technical service personnel. 1) Low-voltage Energy Storage Systems Battery Battery Battery Inverter Series Brand Series Model ES EM SBP ES G2 SBP G2 ES uniq (8-12K) ES Uniq (3-6K) EO ET LV ES LD EO G2 SECU-A SECU-A5.4L ● ● ● ● ● GoodWe Battery Compatibility Overview-20260715-EN-V029.1 Information may be subject to change without notice. LX U5.4-L*1 ● ● ● ● ● ● Lynx Home U LX U5.4-20 *2 ● ● ● ● ● ● LX U5.0-30*4 ● ● ● ● ● ● ● ● ● ● GOODWE ● ● ● ● ● ● LX A5.0-10 *3 LX A5.0-30 *5 ● ● ● ● ● ● ● ● Lynx Home A ● ● ● ● ● GW14.3-BAT-LV-G10*6 GW16.1-BAT-LV-G10*7 ● ● ● ● ● Note: The Lynx Home A/U series batteries do not support parallel connections between different models. ES/EM/SBP/BP: *1. ARM firmware versions 11 and above are required for compatibility. *2. ARM firmware versions 11 and above are required for compatibility. *4. ARM firmware versions 34 and above are required for compatibility.

Source: <https://en.goodwe.com/Ftp/EN/Downloads/User%20Manual/GW_Battery%20Compatibility%20Overview-EN.pdf>

LX U5.0-30 — Solar inverter–battery compatibility


**Inverter brand:** GoodWe

**Battery brand:** GoodWe

**Battery model:** LX U5.4-L

**Communication interface:** CAN

**Minimum firmware:** ARM firmware versions 11 and above

**Supported system types:** On-grid

> In addition to the batteries listed in this document, there are some batteries that follow the GOODWE CAN communication protocol that are not listed in this document, if you need to get the matching information for these batteries, please consult GOODWE's technical service personnel. 1) Low-voltage Energy Storage Systems Battery Battery Battery Inverter Series Brand Series Model ES EM SBP ES G2 SBP G2 ES uniq (8-12K) ES Uniq (3-6K) EO ET LV ES LD EO G2 SECU-A SECU-A5.4L ● ● ● ● ● GoodWe Battery Compatibility Overview-20260715-EN-V029.1 Information may be subject to change without notice. LX U5.4-L*1 ● ● ● ● ● ● Lynx Home U LX U5.4-20 *2 ● ● ● ● ● ● LX U5.0-30*4 ● ● ● ● ● ● ● ● ● ● GOODWE ● ● ● ● ● ● LX A5.0-10 *3 LX A5.0-30 *5 ● ● ● ● ● ● ● ● Lynx Home A ● ● ● ● ● GW14.3-BAT-LV-G10*6 GW16.1-BAT-LV-G10*7 ● ● ● ● ● Note: The Lynx Home A/U series batteries do not support parallel connections between different models. ES/EM/SBP/BP: *1. ARM firmware versions 11 and above are required for compatibility.

Source: <https://en.goodwe.com/Ftp/EN/Downloads/User%20Manual/GW_Battery%20Compatibility%20Overview-EN.pdf>

LX U5.4-L — Solar inverter–battery compatibility


**Inverter brand:** GoodWe

**Battery brand:** GoodWe

**Battery model:** LXD5.0-10

**Communication interface:** CAN

**Supported system types:** On-grid

> Lynx Home D*5 LXD5.0-10

Source: <https://en.goodwe.com/Ftp/EN/Downloads/User%20Manual/GW_Battery%20Compatibility%20Overview-EN.pdf>

LXD5.0-10 — Solar inverter–battery compatibility


**Inverter brand:** GoodWe

**Battery brand:** Alpha

**Battery model:** M48112-P

**Nominal voltage:** 48V

**Communication interface:** CAN

**Minimum firmware:** ARM firmware versions 11 and above

**Supported system types:** On-grid

**Restrictions or notes:** CAN communication line sequence of ALPHA-ESS battery does not match GoodWe inverters. A matching solution provided by ALPHA-ESS is required.

> Battery Brand Battery Series Battery Model ES EM SBP ES G2 SBP G2 ES Uniq Soluna 4K Pack ● ● ● Soluna LV (48V) Battery Series Soluna 5K Pack ● ● ● Soluna EOS 5K Pack ● ● ● Battery Brand Battery Series Battery Model ES EM SBP ES G2 SBP G2 ES Uniq Smile5-BAT Series SMILE5-BAT*2 ● ● ● Smile-BAT-10.1P*2 ● ● ● Smile-BAT Series Smile-BAT-10.3P*2 ● ● ● ALPHA*1 Smile-BAT-13.3P*3 ● ● ● M48112-P Series M48112-P*3 ● ● ● M48100-P Series M48100-P*3 ● ● ● ES/EM/SBP/BP: *1. CAN communication line sequence of ALPHA-ESS battery does not match GoodWe inverters. A matching solution provided by ALPHA-ESS is required. *2. ARM firmware versions 10 and above are required for compatibility. *3. ARM firmware versions 11 and above are required for compatibility.

Source: <https://en.goodwe.com/Ftp/EN/Downloads/User%20Manual/GW_Battery%20Compatibility%20Overview-EN.pdf>

M48112-P — Solar inverter–battery compatibility


**Inverter brand:** Victron

**Battery brand:** MeterBoost

**Battery model:** MeterBoost LiFePO4

**Communication interface:** BMS-Can (500 kbit/s) or VE.Can (250 kbit/s)

> It is possible to use either the BMS-Can or VE.Can ports with this battery.

Source: <https://www.victronenergy.com/live/battery_compatibility:meterboost>

MeterBoost LiFePO4 — Solar inverter–battery compatibility


**Inverter brand:** Victron

**Battery brand:** MG Energy Systems

**Battery model:** MG Energy Systems lithium-ion

**Communication interface:** CAN-bus

> The cooperation with Victron Energy goes back all the way to 2010. Back then we started developing our first Lithium-Ion battery systems.

Source: <https://www.victronenergy.com/live/battery_compatibility:mgenergysystems>

MG Energy Systems lithium-ion — Solar inverter–battery compatibility


**Inverter brand:** GoodWe

**Battery brand:** iPotisEdge

**Battery model:** Mint-JKE10

**Communication interface:** CAN

**Minimum firmware:** ARM firmware versions 12 and above

**Supported system types:** On-grid

> Battery Brand Battery Series Battery Model EH** BT BH EHB ET (15-30kW) ET G2 Mint-JKE5 ● ● Mint-JKE10 ● ● iPotisEdge Mint-JKE*1 Mint-JKE15 ● ● ● Mint-JKE20 ● ● ● **.Including EH Series :EH PLUS EH/BH/EHB/BT: *1. ARM firmware versions 12 and above are required for compatibility. 3) Commercial and Industrial Energy Storage Systems Inverter Series Battery Brand Battery Series Battery Model ETC BTC LX C 101-10 ● ● LX C 120-10 ● ● GOODWE Lynx C series*1 LX C 138-10 ● ● LX C 156-10 ● ● ETC 50kW/BTC 50kW:

Source: <https://en.goodwe.com/Ftp/EN/Downloads/User%20Manual/GW_Battery%20Compatibility%20Overview-EN.pdf>

Mint-JKE10 — Solar inverter–battery compatibility


**Inverter brand:** Sofar

**Battery brand:** Pylontech

**Battery model:** Pelio-L

**Nominal voltage:** 48V

**Communication interface:** RS485(115200)/CAN

**Minimum firmware:** V1.2

**Supported system types:** On-grid

> Sofar AN RS485(115200)/C HYD series On-grid Yes Yes V1.2 AN ECH3K ~ 6K-SML-EU LCD: 29.08 CHINT POWER CAN On/off-grid Yes Yes ECA3K ~ 6K-SNL-EU DSP: 05.95 Hardware version Rev1.2.4 AP systems ELS-5K CAN On-grid Yes Yes Software version Rev1.2.X RS485(9600)/CA Sermatec SMT-5K-TL-LV On/off-grid Yes Yes N RS485(115200)/C Zucchetti Centro Azzurro 3000SP On-grid Yes Yes V1.2 AN Sistemi RS485(115200)/C Azzurro HYD3000/6000-ES On-grid Yes Yes V1.2 AN RHI/RAI series CAN On/off-grid PV only Yes 90009 Solis US2000 US2000V2 US3000 US2000C US3000C US5000 US5000-B UP5000 UF5000 Phantom-S Force-L1/L2 Pelio-L Please note that compatibility testing with various inverter brands is currently underway. The list will be updated regularly. For any inquiries, please contact: service@pylontech.com.cn 4/8 Compatibility List of Pylontech ESS and Inverters Ver.2.35.xlsx 48V ESS Last Update:

Source: <https://pylonwebs3.s3.amazonaws.com/upload_us/2025/02/10/Compatibility%20List%20of%20Pylontech%20ESS%20and%20Inverters%20Ver.2.35_20250210103505A665.pdf>

Pelio-L — Solar inverter–battery compatibility


**Inverter brand:** Victron

**Battery brand:** Pylontech

**Battery model:** Pelio-L

**Nominal voltage:** 51.2V

**Communication interface:** CAN-bus

**Minimum firmware:** Venus OS v3.50

**Supported system types:** ESS, Grid Backup, Off-grid

**Module capacity:** 5.12kWh

> CAN-bus Wiring 4. GX Device Settings 5. VEConfigure Settings 6. VE.Direct MPPT Settings 7. Example Wiring Diagram 8. Troubleshooting 9. FAQ and Known Issues The maximum charge and discharge current is limited to 25A, but the data sheet tells me the maximum is 100A. After charging the battery the charge current often changes between 0A and 25A. My system isn't charging at the rated capacity, or my PV is shutting down My system only charges the battery to 52.4V The battery won't charge to 100% 'Internal Error' shown on battery status 'High cell voltage' warning or alarm shown on battery status 10. Further Information DISQUS Victron & Pylontech UP2500, US2000(C/D), US3000, US3000C, US5000, US5000B, UF5000, Pelio-L, UP5000, Phantom-S, Force-L1 & L2 The combination of Victron products with Pylontech lithium batteries has been tested and certified by the Victron and Pylontech R&D departments. General information about the battery is found in Pylontech's documentation. This manual is intended to be used in conjunction with the product manual supplied by Pylontech. It provides additional and specific information regarding integration with Victron systems. The Pylontech includes a Battery Management System (BMS) with each battery module. This interfaces with the Victron <https://www.victronenergy.com/live/venus-os:start> GX device and can support multiple battery modules connected in parallel. 1. Product & system compatibility <https://www.victronenergy.com/live/_media/battery_compatibility:pylontech_battery.png> Battery | UP2500* | US2000 (Plus/C/D) | US3000(C) | UP5000 & US5000(B) | Pelio-L | Force-L1 & L2 | UF5000 | Nominal voltage | 24V | 48V | 48V | 48V | 51.2V | 48V | 51.2V | Module capacity | 2.55 kWh | 2.4 kWh | 3.5 kWh | 4.8 kwh | 5.12kWh |

Source: <https://www.victronenergy.com/live/battery_compatibility:pylontech_phantom>


**Inverter brand:** Studer Innotec

**Battery brand:** Pylontech

**Battery model:** Phantom-S

**Nominal voltage:** 48V

**Communication interface:** CAN

**Minimum firmware:** R652

**Supported system types:** On/off-grid

> service@pylontech.com.cn 3/8 Compatibility List of Pylontech ESS and Inverters Ver.2.35.xlsx 48V ESS Last Update: 2025/1/21 Key Features Inverter Activation Inverter Type Battery COMM. Application Force Firmware Ver Brand Charge Multiplus 48V (via Venus OS) CAN a Yes Yes 422/V2.15 On/off-grid Victron Energy Quattro 48V (via Venus OS) CAN a Yes Yes 422/V2.15 On/off-grid SI 4.4-M SMA Solar SI 6.0-H d CAN On/off-grid No Yes Technology AG SI 8.0-H SI 6048US Gateway: V1.06 Schneider- Conext XW Pro series CAN On/off-grid Yes Yes XW+ Pro: V1.04（UL) / Electric V1.05 (IEC) GW-BP/SBP CAN On-grid Yes Yes US2000 US2000V2 Goodwe h CAN On-grid Yes Yes GW-ES/ES-C10 US3000 US2000C EM US3000C CAN On-grid Yes Yes IMEON 3.6 US5000 CAN On/off-grid Yes Yes V1.7.6.5 Imeon Energy US5000-B IMEON 9.12 UP5000 CAN On/off-grid Yes Yes V1.7.6.5 UF5000 Xtender 48V serie CAN On/off-grid Yes Yes R652 Phantom-S Studer Innotec

Source: <https://pylonwebs3.s3.amazonaws.com/upload_us/2025/02/10/Compatibility%20List%20of%20Pylontech%20ESS%20and%20Inverters%20Ver.2.35_20250210103505A665.pdf>

Phantom-S — Solar inverter–battery compatibility


**Inverter brand:** Victron

**Battery brand:** Pylontech

**Battery model:** Phantom-S

**Nominal voltage:** 48V

**Communication interface:** CAN-bus

**Minimum firmware:** Venus OS v3.50

**Supported system types:** ESS, Grid Backup, Off-grid

> 48V: US2000, US3000, US2000C/D, US3000C, US5000, US5000B, UP5000, Phantom-S, Force-L1 & L2

Source: <https://www.victronenergy.com/live/battery_compatibility:pylontech_phantom>


**Inverter brand:** GoodWe

**Battery brand:** Dyness

**Battery model:** POWER BOX G2

**Nominal voltage:** 48V

**Communication interface:** CAN

**Minimum firmware:** ARM firmware versions 08 and above

**Supported system types:** On-grid

> GoodWe Battery Compatibility Overview-20260715-EN-V029.1 Information may be subject to change without notice. DYNESS-LV Series DL5.0X*3 ● ● A48100*4 ● ● POWER BOX G2*5 POWER BOX G2 ● ● ● POWER BRICK*6 POWER BRICK ● ● ● ES/EM/SBP/BP: *1. ARM firmware versions 07 and above are required for compatibility. ES G2/SBP G2: *2. ARM firmware versions 06 and above are required for compatibility. *3. ARM firmware versions 07 and above are required for compatibility. *4. ARM firmware versions 07 and above are required for compatibility. *5. ARM firmware versions 08 and above are required for compatibility. *6. ARM firmware versions 08 and above are required for compatibility. ES Uniq: *5. ARM firmware versions 09 and above are required for compatibility. *6. ARM firmware versions 09 and above are required for compatibility. Battery Brand Battery Series Battery Model ES EM SBP ES G2 SBP G2 ES Uniq LBS051100A-A02 ● LBS051100A Series*1 LBS051100A-A03 ● OLOID LBS051200A-A02 ● LBS051200A Series*1 LBS051200A-A03 ● ES: *1. ARM firmware versions 12 and above are required for compatibility. Battery Brand Battery Series Battery Model ES EM SBP ES G2 SBP G2 ES Uniq Soluna 4K Pack ● ● ● Soluna LV (48V)

Source: <https://en.goodwe.com/Ftp/EN/Downloads/User%20Manual/GW_Battery%20Compatibility%20Overview-EN.pdf>

POWER BOX G2 — Solar inverter–battery compatibility


**Inverter brand:** GoodWe

**Battery brand:** Dyness

**Battery model:** POWERBOX F-5.0

**Nominal voltage:** 48V

**Communication interface:** CAN

**Minimum firmware:** ARM firmware versions 07 and above

**Supported system types:** On-grid

> DYNESS-LV x4 ● ● ● POWERBOX F-2.5 ● ● ● POWERBOX F-5.0 ● ● ● POWERBOX F Series*1 DYNESS POWERBOX F-7.5 ● ● ● POWERBOX F-10.0 ● ● ● DL5.0C*2 ● ● ● GoodWe Battery Compatibility Overview-20260715-EN-V029.1 Information may be subject to change without notice. DYNESS-LV Series DL5.0X*3 ● ● A48100*4 ● ● POWER BOX G2*5 POWER BOX G2 ● ● ● POWER BRICK*6 POWER BRICK ● ● ● ES/EM/SBP/BP: *1. ARM firmware versions 07 and above are required for compatibility.

Source: <https://en.goodwe.com/Ftp/EN/Downloads/User%20Manual/GW_Battery%20Compatibility%20Overview-EN.pdf>

POWERBOX F-5.0 — Solar inverter–battery compatibility


**Inverter brand:** Delios s.r.l.

**Battery brand:** Pylontech

**Battery model:** Powercube-M1C

**Communication interface:** CAN

**Minimum firmware:** V3.00

**Supported system types:** On/off-grid

> Pylontech ESS and Inverters Ver.2.35.xlsx High Voltage ESS Last Update: 2025/1/21 Key Features Activation Inverter Inverter Type Battery COMM. Application Force Firmware Ver Installation Brand Charge ABH1002AA ISS 1Play 3TL / 6TL CAN On/off-grid Yes Yes Wall mounting Ingeteam Power ABH1003_Q(disp) Technology ABH1007_A ISS 1Play 3TL M / 6TL M CAN On/off-grid Yes Yes Wall mounting ABH1003_Q(disp) RHI-3P-HVES-5G series S6-EH3P(5-10)K-H-EU Solis CAN On/off-grid Yes Yes Wall mounting S6-EH1P(3.8-11.4)K-H-US S6-EH3P(12-20)K-H S6-EH3P(29.9-50)K-H b SMA Solar SBS 3.7-10 - SBS6.0-10 CAN On/off-grid Yes Yes 04.04.03.R Wall mounting Technology AG PLENTICORE plus c PLENTICORE plus G2 KOSTAL Industrie PLENTICORE BI xx/26 RS485 On/off-grid Yes Yes Wall mounting Elektrik GmbH PLENTICORE BI xx/26 G2 PLENTICORE G3 KACO NH3 Series Powercube CAN On/off-grid Yes Yes Wall mounting X1/X2/H1/H2 SAPPHIRE- Sungrow SH5.0/6.0/8.0/10.0RT Powercube CAN On/off-grid Yes Yes Wall mounting H_V11_V01_A X1/X2/H1/H2-V2 Delios s.r.l. DLX HV series Powercube-M1C CAN On/off-grid Yes Yes V3.00

Source: <https://pylonwebs3.s3.amazonaws.com/upload_us/2025/02/10/Compatibility%20List%20of%20Pylontech%20ESS%20and%20Inverters%20Ver.2.35_20250210103505A665.pdf>

Powercube-M1C — Solar inverter–battery compatibility


**Inverter brand:** KACO

**Battery brand:** Pylontech

**Battery model:** Powercube X1/X2/H1/H2

**Communication interface:** CAN

**Supported system types:** On/off-grid

> KACO NH3 Series Powercube CAN On/off-grid Yes Yes

Source: <https://pylonwebs3.s3.amazonaws.com/upload_us/2025/02/10/Compatibility%20List%20of%20Pylontech%20ESS%20and%20Inverters%20Ver.2.35_20250210103505A665.pdf>

Powercube X1/X2/H1/H2 — Solar inverter–battery compatibility


**Inverter brand:** Sungrow

**Battery brand:** Pylontech

**Battery model:** Powercube X1/X2/H1/H2

**Communication interface:** CAN

**Minimum firmware:** SAPPHIRE-H_V11_V01_A

**Supported system types:** On/off-grid

> CAN On/off-grid Yes Yes DSP:V1.0; ARM:V1.14 Wall mounting Please note that compatibility testing with various inverter brands is currently underway. The list will be updated regularly. For any inquiries, please contact: service@pylontech.com.cn 2/8 Powercube X1/X2/H1/H2 Powercube Compatibility List of Pylontech ESS and Inverters Ver.2.35.xlsx X1/X2/H1/H2-V2 Powercube-M1C High Voltage ESS Force H1/H2 Force H1/H2-V2 Last Update: 2025/1/21 Force-H3 Key Features Activation Inverter Inverter Type Battery COMM. Application Force Firmware Ver Installation Brand Charge Yelon HV6K~12K-3H CAN On/off-grid Yes Yes SV02.02.007 Wall mounting GMDE TB5200TD CAN On-grid Yes Yes 1.0.3 Wall mounting Voltronic Infinisolar TX-PA 30K Modbus RTU On/off-grid Yes Yes 2008.27.12 Cabinet 21-01-27 Blue Mountain BME-20 Modbus RTU On/off-grid Yes Yes DSP:2101.2212 Cabinet Energy BME-30 MCU:2011.1712 HPS30K_150K_HV3_ ATESS HPS30/50/100/120/150 CAN On/off-grid Yes Yes Cabinet SV9.1.39 MPS0030~0500 Series V302B400D014 MEGAREVO MEGA0030~0500TS Series CAN On/off-grid Yes Yes Cabinet V102B500D014 MEGA0500/MEGA0630 Powercube H1/H2-V2 Powercube Growocol GW-MPS0030~0500 Series M1/M2/M3/M5/M7 CAN On/off-grid Yes Yes V302B400D014 Cabinet Efacec Battery Inverter Ferroamp EnergyHub Customized Pramac PBI Series with additional On/off-grid Cabinet Sungrow

Source: <https://pylonwebs3.s3.amazonaws.com/upload_us/2025/02/10/Compatibility%20List%20of%20Pylontech%20ESS%20and%20Inverters%20Ver.2.35_20250210103505A665.pdf>


**Inverter brand:** Deye(Sunsynk)

**Battery brand:** Pylontech

**Battery model:** Powercube X1/X2/H1/H2

**Communication interface:** CAN

**Minimum firmware:** 2001-X018

**Supported system types:** On/off-grid

> 00 Wall mounting EQX2 4002-12002-HT series HHS series(1) HBS series(1) Ver.23(1) HYPONTECH CAN On/off-grid Yes Yes Wall mounting HHT series(2) Ver.29(2) HBT series(2) Please note that compatibility testing with various inverter brandsPowercube is currently underway. The list will be updated regularly. For any inquiries, please contact: service@pylontech.com.cnX1/X2/H1/H2 Powercube X1/X2/H1/H2-V2

Source: <https://pylonwebs3.s3.amazonaws.com/upload_us/2025/02/10/Compatibility%20List%20of%20Pylontech%20ESS%20and%20Inverters%20Ver.2.35_20250210103505A665.pdf>


**Inverter brand:** EATON

**Battery brand:** Pylontech

**Battery model:** Powercube X1/X2/H1/H2

**Communication interface:** CAN

**Minimum firmware:** V3.00

**Supported system types:** On/off-grid

> EATON xStorage Home 3P Series CAN On/off-grid Yes Yes V3.00

Source: <https://pylonwebs3.s3.amazonaws.com/upload_us/2025/02/10/Compatibility%20List%20of%20Pylontech%20ESS%20and%20Inverters%20Ver.2.35_20250210103505A665.pdf>


**Inverter brand:** SolarMax

**Battery brand:** Pylontech

**Battery model:** Powercube X1/X2/H1/H2

**Communication interface:** CAN

**Minimum firmware:** V3.00

**Supported system types:** On/off-grid

> SolarMax ES-T Series CAN On/off-grid Yes Yes V3.00

Source: <https://pylonwebs3.s3.amazonaws.com/upload_us/2025/02/10/Compatibility%20List%20of%20Pylontech%20ESS%20and%20Inverters%20Ver.2.35_20250210103505A665.pdf>


**Inverter brand:** Ingeteam Power Technology

**Battery brand:** Pylontech

**Battery model:** Powercube X1/X2/H1/H2

**Communication interface:** CAN

**Minimum firmware:** ABH1002AA

**Supported system types:** On/off-grid

> 00 Wall mounting EQX2 4002-12002-HT series HHS series(1) HBS series(1) Ver.23(1) HYPONTECH CAN On/off-grid Yes Yes Wall mounting HHT series(2) Ver.29(2) HBT series(2) Please note that compatibility testing with various inverter brandsPowercube is currently underway. The list will be updated regularly. For any inquiries, please contact: service@pylontech.com.cnX1/X2/H1/H2 Powercube X1/X2/H1/H2-V2

Source: <https://pylonwebs3.s3.amazonaws.com/upload_us/2025/02/10/Compatibility%20List%20of%20Pylontech%20ESS%20and%20Inverters%20Ver.2.35_20250210103505A665.pdf>


**Inverter brand:** Victron

**Battery brand:** Pytes

**Battery model:** Pytes LiFePO4

**Nominal voltage:** 48V

**Communication interface:** BMS-Can (500 kbit/s)

**Minimum firmware:** GX v3.31

**Restrictions or notes:** minimum supported Pytes firmware version is 1.10.18

> The minimum supported GX firmware version is v3.31. It is recommended to use the latest firmware version on new installations and when trouble shooting issues.

Source: <https://www.victronenergy.com/live/battery_compatibility:pytes>

Pytes LiFePO4 — Solar inverter–battery compatibility

battery_brand, battery_model, communication_interface, inverter_brand, minimum_firmware, nominal_voltage, restrictions