Metal Fabrication and Finishing Source Nine Categories (area sources)
For Metal Fabrication and Finishing Source Nine Categories (area sources), cfr subpart is 40 CFR 63 Subpart XXXXXX (6X); source type is area sources; original final rule date is 2008-07-23; most recent amendment date is 2008-07-23; rtr status is not stated, recorded from its source on 2026-09-29.
- source category
- Metal Fabrication and Finishing Source Nine Categories (area sources)
- cfr subpart
- 40 CFR 63 Subpart XXXXXX (6X)
- source type
- area sources our reading
- original final rule date
- 2008-07-23
- most recent amendment date
- 2008-07-23
- rtr status
- not stated our reading
- key haps regulated
- cadmium, chromium, lead, manganese, nickel
- epa category url
- https://www.epa.gov/stationary-sources-air-pollution/metal-fabrication-and-finishing-source-categories-national our reading
Values marked our reading are our classification of what the source says — the source does not print them in those words. The quote below is the evidence for each one; judge it yourself.
What the source says
On June 13, 2008 the Environmental Protection Agency (EPA) issued final national air toxics standards for smaller-emitting sources, known as area sources, for nine metal fabrication and finishing source categories. These standards affect any new or existing facility that performs metal fabrication or finishing operations which uses or emits compounds of cadmium, chromium, lead, manganese, and nickel; or uses or emits elemental forms of all except lead. The rule covers area sources in the following nine industries:
— epa.gov, retrieved 2026-09-29
Source
- epa.govhttps://www.epa.gov/stationary-sources-air-pollution/metal-fabrication-and-finishing-source-categories-national