Metal Coil Surface Coating
For Metal Coil Surface Coating, cfr subpart is 40 CFR 63 Subpart SSSS; source type is major sources; original final rule date is 2002-06-10; most recent amendment date is 2003-03-17; rtr status is completed, recorded from its source on 2026-09-29.
- source category
- Metal Coil Surface Coating
- cfr subpart
- 40 CFR 63 Subpart SSSS
- source type
- major sources our reading
- original final rule date
- 2002-06-10
- most recent amendment date
- 2003-03-17
- rtr status
- completed our reading
- key haps regulated
- glycol ethers, xylenes (isomers and mixtures), toluene, and isophorone
- epa category url
- https://www.epa.gov/stationary-sources-air-pollution/surface-coating-metal-coil-national-emission-standards-hazardous our reading
Values marked our reading are our classification of what the source says — the source does not print them in those words. The quote below is the evidence for each one; judge it yourself.
What the source says
This action promulgates national emission standards for hazardous air pollutants (NESHAP) for new and existing sources that coat metal coil. The final rule implements section 112(d) of the Clean Air Act (CAA) and will require all new and existing metal coil coating operations that are major sources to meet HAP emission standards reflecting the application of the maximum achievable control technology (MACT).
— epa.gov, retrieved 2026-09-29
Where each value comes from
The value above is stated away from the sentence quoted with the answer, so the passage that states it is shown here too.
rtr status
Surface Coating of Metal Cans and Metal Coil | 6/4/2019 | 2/25/2020
— all from epa.gov, retrieved 2026-09-29